| 0/0 |
2026/11/18 07:14 |
flow |
assessment-kcsan |
14m
Results: map[Benign:true Explanation:### Race Summary
- **Racing functions:** `migration_disable_value()` (via
`tracing_gen_ctx_irq_test()`) vs `__migrate_disable()` (via `migrate_disable()`)
- **Variable/Field:** `current->migration_disabled` (`unsigned short`, 2 bytes)
---
### Synchronization Context
`__migrate_disable()` disables preemption (`guard(preempt)()`) and
increments/sets `current->migration_disabled = 1;`. However, local interrupts
remain enabled during this operation. A hardware timer interrupt
(`sysvec_apic_timer_interrupt`) occurred on the same CPU, preempting the task
right at the memory write. During interrupt return processing (`irqentry_exit`),
an MSR write tracepoint triggered `trace_event_buffer_reserve()`, which invokes
`tracing_gen_ctx_irq_test()` -> `migration_disable_value()` to record execution
context flags. Consequently, the interrupt handler read
`current->migration_disabled` concurrently with the task's interrupted write to
the same field.
---
### Final Classification: BENIGN
---
### Reasoning
1. **Diagnostic / Tracing Only:** `migration_disable_value()` reads
`current->migration_disabled` exclusively to populate the upper 4 bits of
`trace_entry::preempt_count` in the ftrace ring buffer. This information is
purely diagnostic and only consumed when formatting trace logs (e.g. via
`trace_print_lat_fmt()`).
2. **Scalar Atomicity:** The field `migration_disabled` is an aligned 16-bit
(`unsigned short`) scalar. Reads and writes are atomic word accesses on x86 and
other supported architectures, preventing torn reads.
3. **Safe Values:** If the interrupt is handled immediately before or during the
write, the trace entry records `0`; if after, it records `1`. Either value
accurately reflects the state of the task around the transition, and neither
outcome affects kernel execution, control flow, or memory safety.
---
### Recommended Annotations
Wrap the diagnostic read in `READ_ONCE()` (or `data_race()`):
```c
static unsigned short migration_disable_value(void)
{
#if defined(CONFIG_SMP)
return READ_ONCE(current->migration_disabled);
#else
return 0;
#endif
}
``` FailureDetectableBy:]
|
| 1/1 |
2026/11/18 07:14 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/6d0c4d912ac4c28457116fbfe153047fb3052961/data]
|
| 2/1 |
2026/11/18 07:14 |
action |
kernel-builder |
0m
Results: map[KernelObj:/app/workdir/cache/build/4fc9cb093f0faa8b5951a9949e7cc5ff4ce76564/data]
|
| 3/1 |
2026/11/18 07:14 |
action |
codesearch-prepare |
0m
Results: map[Index:codesearch-index]
|
| 4/1 |
2026/11/18 07:14 |
agent |
expert |
14m
Model:
Results: map[Benign:true FailureDetectableBy:]
Instruction: # KCSAN Data Race Severity Analysis Protocol
You are an expert Linux kernel concurrency engineer analyzing a Kernel
Concurrency Sanitizer (KCSAN) data race report to determine if it is
**BENIGN** or **HARMFUL**.
## 1. CLASSIFICATIONS
### **BENIGN (Truly Benign)**
The logic is sound and structurally tolerant to compiler optimizations or
stale reads (or benign tearing on diagnostics/stats).
- **Diagnostics/Stats:** Reads or non-critical updates used only for `/proc`,
`/sys`, counters, timestamps, or `pr_info`.
- **Heuristic Hints:** A "hint" flag or threshold where an old value only
causes a slightly delayed update or a sub-optimal but safe fast-path.
- **Single-Writer Flag Updates:** A single writer updating flags where the
concurrent read is a simple bitwise check (e.g., `flags & MASK`). These are
historically tolerated, assuming neither "Fused Accesses" nor "Ordering
Violations" are relevant in this context.
- **Marked Reloads & Lock Re-checks:** A load feeding into a `cmpxchg()` loop,
checked against a later `READ_ONCE()` reload, or re-verified under a lock
(assuming no "Ordering Violations" on the lockless fast-path).
- **Safe Overwrites & Plain Scalar Accesses:** Writing the same value already
present, or aligned word-sized scalar accesses (e.g., `read (marked)` vs
plain `write`) where observing either the old or new value is safe.
### **HARMFUL (Logic Bug or Marking Required)**
The race causes incorrect behavior due to a synchronization failure or
because missing annotations allow the compiler or CPU to break the algorithm.
**Marking Required for Correctness:**
Do **not** classify a race as HARMFUL merely because an access lacks
`READ_ONCE()`/`WRITE_ONCE()`; you must prove one of these concrete hazards:
- **Fused Accesses:** The compiler hoists a plain load out of a tight
barrier-free spin loop causing a livelock (note: non-inlined calls,
`schedule()`, and locks act as compiler barriers), or reloads a pointer/index
between check and use (TOCTOU).
- **Torn Accesses:** An access larger than word size (e.g., 64-bit on 32-bit
arch, or multi-word structs; aligned `<= sizeof(long)` scalars and pointers
do not tear) is split into multiple non-atomic accesses. Note that
`READ_ONCE()` does **not** guarantee atomicity for 64-bit variables on 32-bit
architectures.
- **Ordering Violations:** The race breaks a required "happens-before"
relationship between dependent memory accesses (requires primitives with
implied or explicit memory barriers).
**Logic Bugs:**
A fundamental synchronization failure. Marking accesses will **not** fix it;
the logic itself must change.
- **Pointers/Lifecycle:** The racing variable is a pointer being dereferenced
or a refcount governing object lifecycle (Use-After-Free risk).
- **Control Flow:** The variable guards a critical section, memory allocation,
or hardware command.
- **Bitfields:** Concurrent writes to different bits in the same word.
Compilers often use non-atomic read-modify-write sequences, meaning a
write to `bit_A` can "clobber" a concurrent write to `bit_B`. However,
do not blindly assume all bitfield accesses are harmful; you must prove
that a concurrent write actually clobbers another in a way that breaks
logic.
- **Complex Structures:** Races on shared lists, trees, or hashmaps.
- **Lossy Updates:** Concurrent plain RMW operations (e.g., `var++`) on
non-diagnostic variables where every increment must be preserved.
- **State Machines:** Races allowing a state machine to bypass transitions
or enter an invalid state.
- **Adjacent Unsynchronized Operations:** Consider races happening at the
same time. For example, if both threads execute `struct->has_elements = true;
list_add(node, &struct->list);`, the race on `has_elements` implies an
adjacent race on `list_head`, which is HARMFUL.
## 2. RESEARCH & ANALYSIS WORKFLOW
1. **Locate the Race:** Find the exact variables and functions in the stack
traces. Do not speculate about hypothetical compiler
behaviors or theoretical dangers (e.g., dismissing something as
"fundamentally unsafe") without tracing the actual data flow to a crash.
2. **Contextualize:** Identify held locks, RCU sections, or interrupt
contexts. Explain why the race is possible (e.g., "Thread A holds `lock`,
but Thread B is a lockless reader").
3. **Data Flow:** Follow the racing variable into its subsequent uses. If
the reader sees a stale or torn value, what branch is taken? Does it lead
to a pointer dereference or `BUG_ON()`? **You must prove harm via this
data flow.**
4. **Failure Sequencing (if HARMFUL):** Construct a two-column execution trace
demonstrating the failure.
*Example format:*
```text
CPU0 CPU1
function_a()
// lockless read
ptr = global_ptr
<PREEMPT>
function_b()
lock(&my_lock)
global_ptr = NULL
unlock(&my_lock)
kfree(ptr)
if (ptr)
*ptr = 1; // -> Use-After-Free!
```
## 3. OUTPUT FORMAT
- **Race Summary:** `[Function A]` vs `[Function B]` on `[Variable/Field]`.
- **Synchronization context:** List held locks and explain the lack of mutual
exclusion.
- **Final Classification:** **BENIGN** or **HARMFUL**.
**If BENIGN:**
- **Reasoning:** Briefly explain why the race is structurally tolerant to stale
reads (or benign tearing on diagnostics/stats).
- **Recommended Annotations:** Suggest appropriate annotations (e.g.,
`READ_ONCE()`, `WRITE_ONCE()`, `data_race()`).
**If HARMFUL:**
- **Failure Reasoning:** Explain and provide a two-column interleaving showing
exactly how the race leads to a failure such as corruption or kernel crash.
- **FailureDetectableBy:** One of:
- `"kasan"`: memory safety bug (use-after-free, out-of-bounds, double-free).
- `"kmsan"`: uninitialized memory read/exposure (e.g. missing publish/subscribe ordering).
- `"any"`: kernel crash/hang (`BUG_ON`, `WARN_ON`, NULL deref, GPF, deadlock).
- `"user"`: user-visible ABI/semantic corruption detectable by userspace without a kernel crash.
- `"none"`: purely internal kernel state/accounting bug without crash or user-visible invariant violation.
- **Recommended Fix (ONLY if fix is trivial):** Suggest a structural fix (e.g.,
"Hold `mapping->i_pages` lock", "Convert to `atomic_t`") or required memory
ordering annotations (e.g., "Wrap in `READ_ONCE()`", "Use
`smp_load_acquire()`").
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The data race report is:
==================================================================
BUG: KCSAN: data-race in sk_filter_trim_cap / tracing_gen_ctx_irq_test
read to 0xffff8881017e95b8 of 2 bytes by task 5403 on cpu 0:
migration_disable_value kernel/trace/trace.c:1718 [inline]
tracing_gen_ctx_irq_test+0xdd/0x110 kernel/trace/trace.c:1747
tracing_gen_ctx_flags include/linux/trace_events.h:204 [inline]
tracing_gen_ctx include/linux/trace_events.h:211 [inline]
tracing_gen_ctx_dec include/linux/trace_events.h:218 [inline]
trace_event_buffer_reserve+0xe4/0x180 kernel/trace/trace_events.c:720
do_trace_event_raw_event_msr_trace_class arch/x86/include/asm/msr-trace.h:21 [inline]
trace_event_raw_event_msr_trace_class+0x85/0x170 arch/x86/include/asm/msr-trace.h:21
__do_trace_write_msr arch/x86/include/asm/msr-trace.h:45 [inline]
trace_write_msr arch/x86/include/asm/msr-trace.h:45 [inline]
do_trace_write_msr+0xc1/0xe0 arch/x86/lib/msr.c:128
native_write_msr arch/x86/include/asm/msr.h:140 [inline]
wrmsrq arch/x86/include/asm/msr.h:199 [inline]
native_apic_msr_write+0x4a/0x50 arch/x86/include/asm/apic.h:208
apic_write arch/x86/include/asm/apic.h:405 [inline]
lapic_next_event+0x11/0x20 arch/x86/kernel/apic/apic.c:418
clockevents_program_event+0x22e/0x340 kernel/time/clockevents.c:372
tick_program_event+0x79/0xc0 kernel/time/tick-oneshot.c:48
hrtimer_rearm_event kernel/time/hrtimer.c:710 [inline]
hrtimer_rearm kernel/time/hrtimer.c:2181 [inline]
__hrtimer_rearm_deferred+0x569/0x660 kernel/time/hrtimer.c:2201
hrtimer_rearm_deferred_tif include/linux/hrtimer_rearm.h:58 [inline]
hrtimer_rearm_deferred include/linux/hrtimer_rearm.h:67 [inline]
irqentry_hrtimer_rearm_deferred include/linux/irq-entry-common.h:471 [inline]
irqentry_exit_to_kernel_mode_after_preempt include/linux/irq-entry-common.h:509 [inline]
irqentry_exit_to_kernel_mode include/linux/irq-entry-common.h:546 [inline]
irqentry_exit+0x5bc/0x640 kernel/entry/common.c:154
sysvec_apic_timer_interrupt+0x44/0x80 arch/x86/kernel/apic/apic.c:1062
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
rdtsc_ordered arch/x86/include/asm/tsc.h:57 [inline]
delay_tsc+0x5b/0xa0 arch/x86/lib/delay.c:70
udelay include/asm-generic/delay.h:64 [inline]
delay_access kernel/kcsan/core.c:332 [inline]
kcsan_setup_watchpoint+0x255/0x3f0 kernel/kcsan/core.c:622
__migrate_disable include/linux/sched.h:2496 [inline]
migrate_disable include/linux/sched.h:2512 [inline]
bpf_prog_run_save_cb include/linux/filter.h:1104 [inline]
sk_filter_trim_cap+0x1d0/0x580 net/core/filter.c:168
sk_filter include/linux/filter.h:1226 [inline]
unix_dgram_sendmsg+0x63a/0x1050 net/unix/af_unix.c:2184
unix_seqpacket_sendmsg+0xd1/0x120 net/unix/af_unix.c:2550
sock_sendmsg_nosec net/socket.c:800 [inline]
__sock_sendmsg net/socket.c:818 [inline]
____sys_sendmsg+0x50f/0x550 net/socket.c:2713
___sys_sendmsg+0x1c8/0x220 net/socket.c:2770
__sys_sendmmsg+0x1a0/0x310 net/socket.c:2859
__do_sys_sendmmsg net/socket.c:2886 [inline]
__se_sys_sendmmsg net/socket.c:2883 [inline]
__x64_sys_sendmmsg+0x57/0x70 net/socket.c:2883
x64_sys_call+0x1fb4/0x2550 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x11e/0x3a0 arch/x86/entry/syscall_64.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff8881017e95b8 of 2 bytes by task 5403 on cpu 0:
__migrate_disable include/linux/sched.h:2496 [inline]
migrate_disable include/linux/sched.h:2512 [inline]
bpf_prog_run_save_cb include/linux/filter.h:1104 [inline]
sk_filter_trim_cap+0x1d0/0x580 net/core/filter.c:168
sk_filter include/linux/filter.h:1226 [inline]
unix_dgram_sendmsg+0x63a/0x1050 net/unix/af_unix.c:2184
unix_seqpacket_sendmsg+0xd1/0x120 net/unix/af_unix.c:2550
sock_sendmsg_nosec net/socket.c:800 [inline]
__sock_sendmsg net/socket.c:818 [inline]
____sys_sendmsg+0x50f/0x550 net/socket.c:2713
___sys_sendmsg+0x1c8/0x220 net/socket.c:2770
__sys_sendmmsg+0x1a0/0x310 net/socket.c:2859
__do_sys_sendmmsg net/socket.c:2886 [inline]
__se_sys_sendmmsg net/socket.c:2883 [inline]
__x64_sys_sendmmsg+0x57/0x70 net/socket.c:2883
x64_sys_call+0x1fb4/0x2550 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x11e/0x3a0 arch/x86/entry/syscall_64.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 5403 Comm: syz.2.728 Not tainted syzkaller #0 PREEMPT(lazy)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/06/2026
==================================================================
Reply: ### Race Summary
- **Racing functions:** `migration_disable_value()` (via `tracing_gen_ctx_irq_test()`) vs `__migrate_disable()` (via `migrate_disable()`)
- **Variable/Field:** `current->migration_disabled` (`unsigned short`, 2 bytes)
---
### Synchronization Context
`__migrate_disable()` disables preemption (`guard(preempt)()`) and increments/sets `current->migration_disabled = 1;`. However, local interrupts remain enabled during this operation. A hardware timer interrupt (`sysvec_apic_timer_interrupt`) occurred on the same CPU, preempting the task right at the memory write. During interrupt return processing (`irqentry_exit`), an MSR write tracepoint triggered `trace_event_buffer_reserve()`, which invokes `tracing_gen_ctx_irq_test()` -> `migration_disable_value()` to record execution context flags. Consequently, the interrupt handler read `current->migration_disabled` concurrently with the task's interrupted write to the same field.
---
### Final Classification: BENIGN
---
### Reasoning
1. **Diagnostic / Tracing Only:** `migration_disable_value()` reads `current->migration_disabled` exclusively to populate the upper 4 bits of `trace_entry::preempt_count` in the ftrace ring buffer. This information is purely diagnostic and only consumed when formatting trace logs (e.g. via `trace_print_lat_fmt()`).
2. **Scalar Atomicity:** The field `migration_disabled` is an aligned 16-bit (`unsigned short`) scalar. Reads and writes are atomic word accesses on x86 and other supported architectures, preventing torn reads.
3. **Safe Values:** If the interrupt is handled immediately before or during the write, the trace entry records `0`; if after, it records `1`. Either value accurately reflects the state of the task around the transition, and neither outcome affects kernel execution, control flow, or memory safety.
---
### Recommended Annotations
Wrap the diagnostic read in `READ_ONCE()` (or `data_race()`):
```c
static unsigned short migration_disable_value(void)
{
#if defined(CONFIG_SMP)
return READ_ONCE(current->migration_disabled);
#else
return 0;
#endif
}
```
|
| 5/2 |
2026/11/18 07:14 |
llm |
expert |
0m
Model:
Tokens:
input: 8125
output: 36
thoughts: 439
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, so I'm looking at this KCSAN data race report, and the first thing that jumps out is that the read and write both target the same memory location, `0xffff8881017e95b8`, and they're both done by task 5403 on CPU 0. That's a strong indicator.
The read is happening at `kernel/trace/trace.c:1718` within `tracing_gen_ctx_irq_test`, but it looks like it's triggered by the `migration_disable_value` call. The stack trace shows it's interrupted by `sysvec_apic_timer_interrupt`, so we're talking about an interrupt handler in the middle of a KCSAN watchpoint delay. This is where things get interesting. The report shows the read happened during the KCSAN watchpoint delay in `__migrate_disable`.
The write, however, is the same `__migrate_disable` function as the read! The trace shows that write is at include/linux/sched.h:2496, then within `migrate_disable` at include/linux/sched.h:2512.
So, the read is happening *during* an interrupt while we're inside `__migrate_disable`, and the write is also in that same function. That's a potential race, but let's dive into the code.
To confirm my initial thoughts, I need to get a better handle on what's going on. Let's use `read-file` or `codesearch-definition-source` or `grepper` and examine these lines of code closely. I need to understand:
* What `kernel/trace/trace.c:1718` is doing
* What's happening in `include/linux/sched.h:2496` and `include/linux/sched.h:2512`
* And how `net/core/filter.c:168` is involved
|
| 6/2 |
2026/11/18 07:14 |
tool |
read-file |
0m
Args: map[File:kernel/trace/trace.c FirstLine:1710 LineCount:50]
Results: map[Contents:1710: return trace_seq_has_overflowed(s) ?
1711: TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED;
1712: }
1713: EXPORT_SYMBOL_GPL(trace_handle_return);
1714:
1715: static unsigned short migration_disable_value(void)
1716: {
1717: #if defined(CONFIG_SMP)
1718: return current->migration_disabled;
1719: #else
1720: return 0;
1721: #endif
1722: }
1723:
1724: unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
1725: {
1726: unsigned int trace_flags = irqs_status;
1727: unsigned int pc;
1728:
1729: pc = preempt_count();
1730:
1731: if (pc & NMI_MASK)
1732: trace_flags |= TRACE_FLAG_NMI;
1733: if (pc & HARDIRQ_MASK)
1734: trace_flags |= TRACE_FLAG_HARDIRQ;
1735: if (in_serving_softirq())
1736: trace_flags |= TRACE_FLAG_SOFTIRQ;
1737: if (softirq_count() >> (SOFTIRQ_SHIFT + 1))
1738: trace_flags |= TRACE_FLAG_BH_OFF;
1739:
1740: if (tif_need_resched())
1741: trace_flags |= TRACE_FLAG_NEED_RESCHED;
1742: if (test_preempt_need_resched())
1743: trace_flags |= TRACE_FLAG_PREEMPT_RESCHED;
1744: if (IS_ENABLED(CONFIG_ARCH_HAS_PREEMPT_LAZY) && tif_test_bit(TIF_NEED_RESCHED_LAZY))
1745: trace_flags |= TRACE_FLAG_NEED_RESCHED_LAZY;
1746: return (trace_flags << 16) | (min_t(unsigned int, pc & 0xff, 0xf)) |
1747: (min_t(unsigned int, migration_disable_value(), 0xf)) << 4;
1748: }
1749:
1750: struct ring_buffer_event *
1751: trace_buffer_lock_reserve(struct trace_buffer *buffer,
1752: int type,
1753: unsigned long len,
1754: unsigned int trace_ctx)
1755: {
1756: return __trace_buffer_lock_reserve(buffer, type, len, trace_ctx);
1757: }
1758:
1759: DEFINE_PER_CPU(struct ring_buffer_event *, trace_buffered_event);
]
|
| 7/2 |
2026/11/18 07:14 |
llm |
expert |
0m
Model:
Tokens:
input: 9875
output: 36
thoughts: 25
Thoughts: Okay, here's my take on those lines of code, presented as a first-person expert analysis:
**Delving into the `sched.h` Macros**
Alright, let's take a closer look at `include/linux/sched.h:2490-2525`. Immediately, I see this section is likely focused on a specific aspect of the scheduler, probably related to task management or perhaps even interrupt handling. Given the file and line numbers, I'm expecting to find some crucial macros or inline functions here. They're probably dealing with the core data structures used by the scheduler. I'll need to pay particular attention to how these macros handle state transitions. My gut tells me this could relate to how tasks are marked as runnable, blocked, preemptible or otherwise scheduled. I'm keen to check whether there are any memory barriers here or any considerations to make the code multiprocessor-safe. I'm hoping to be able to follow through the sequence of operations. This could be where the scheduler actually "decides" on which task to run next, after it has been triggered. Any complex locking or atomic operations will warrant a more thorough investigation, as that would immediately impact performance and any possible race conditions.
|
| 8/2 |
2026/11/18 07:14 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:2485 LineCount:45]
Results: map[Contents:2485: /*
2486: *Warn about overflow half-way through the range.
2487: */
2488: WARN_ON_ONCE((s16)p->migration_disabled < 0);
2489: #endif
2490: p->migration_disabled++;
2491: return;
2492: }
2493:
2494: guard(preempt)();
2495: this_rq_pinned()++;
2496: p->migration_disabled = 1;
2497: }
2498: #else /* !COMPILE_OFFSETS */
2499: static inline void __migrate_disable(void) { }
2500: static inline void __migrate_enable(void) { }
2501: #endif /* !COMPILE_OFFSETS */
2502:
2503: /*
2504: * So that it is possible to not export the runqueues variable, define and
2505: * export migrate_enable/migrate_disable in kernel/sched/core.c too, and use
2506: * them for the modules. The macro "INSTANTIATE_EXPORTED_MIGRATE_DISABLE" will
2507: * be defined in kernel/sched/core.c.
2508: */
2509: #ifndef INSTANTIATE_EXPORTED_MIGRATE_DISABLE
2510: static __always_inline void migrate_disable(void)
2511: {
2512: __migrate_disable();
2513: }
2514:
2515: static __always_inline void migrate_enable(void)
2516: {
2517: __migrate_enable();
2518: }
2519: #else /* INSTANTIATE_EXPORTED_MIGRATE_DISABLE */
2520: extern void migrate_disable(void);
2521: extern void migrate_enable(void);
2522: #endif /* INSTANTIATE_EXPORTED_MIGRATE_DISABLE */
2523:
2524: #else /* MODULE */
2525: extern void migrate_disable(void);
2526: extern void migrate_enable(void);
2527: #endif /* MODULE */
2528:
2529: DEFINE_LOCK_GUARD_0(migrate, migrate_disable(), migrate_enable())
]
|
| 9/2 |
2026/11/18 07:14 |
llm |
expert |
0m
Model:
Tokens:
input: 10850
output: 36
thoughts: 28
Thoughts: Okay, let's dive into this. I need to get a handle on the context surrounding this section of `include/linux/sched.h`, specifically lines 2460 through 2495. I know that file defines the core scheduling data structures and functions in the Linux kernel. Therefore, I'm expecting to find information relevant to process management, task state, or perhaps some scheduling policy details within that range. I need to refresh my memory on what specific structures or variables are declared in that portion of the file. My goal is to determine what aspects of the kernel's scheduler are relevant to the provided text.
|
| 10/2 |
2026/11/18 07:14 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:2465 LineCount:35]
Results: map[Contents:2465: */
2466: guard(preempt)();
2467: if (unlikely(p->cpus_ptr != &p->cpus_mask))
2468: ___migrate_enable();
2469: /*
2470: * Mustn't clear migration_disabled() until cpus_ptr points back at the
2471: * regular cpus_mask, otherwise things that race (eg.
2472: * select_fallback_rq) get confused.
2473: */
2474: barrier();
2475: p->migration_disabled = 0;
2476: this_rq_pinned()--;
2477: }
2478:
2479: static inline void __migrate_disable(void)
2480: {
2481: struct task_struct *p = current;
2482:
2483: if (p->migration_disabled) {
2484: #ifdef CONFIG_DEBUG_PREEMPT
2485: /*
2486: *Warn about overflow half-way through the range.
2487: */
2488: WARN_ON_ONCE((s16)p->migration_disabled < 0);
2489: #endif
2490: p->migration_disabled++;
2491: return;
2492: }
2493:
2494: guard(preempt)();
2495: this_rq_pinned()++;
2496: p->migration_disabled = 1;
2497: }
2498: #else /* !COMPILE_OFFSETS */
2499: static inline void __migrate_disable(void) { }
]
|
| 11/2 |
2026/11/18 07:14 |
llm |
expert |
0m
Model:
Tokens:
input: 11524
output: 31
thoughts: 36
Thoughts: Okay, let's dive into this. Here's how I'd approach this task, as if these were my internal thoughts:
**Investigating Task Migration Disablement**
Right, let's get down to brass tacks. I need to understand the state of migration disablement within the `task_struct`. My first instinct is to check the `p->migration_disabled` field. It's a key piece of information when dealing with task scheduling and placement, so I need to know its current value.
Now, where's that defined? Time to go straight to the source. I'm going to pull up the `task_struct` definition. I need to refresh my memory and verify the exact type and meaning associated with `migration_disabled`. Is it a simple boolean, a flag, an atomic counter? Understanding the underlying data structure is fundamental to knowing how it works. That's the first and necessary step to understanding this.
|
| 12/2 |
2026/11/18 07:14 |
tool |
grepper |
0m
Args: map[Expression:migration_disabled PathPrefixes:[include/linux/sched.h]]
Results: map[Output:include/linux/sched.h=836=struct task_struct {
--
include/linux/sched.h-947- void *migration_pending;
include/linux/sched.h:948: unsigned short migration_disabled;
include/linux/sched.h-949- unsigned short migration_flags;
--
include/linux/sched.h=2444=static inline void __migrate_enable(void)
--
include/linux/sched.h-2452- */
include/linux/sched.h:2453: if (WARN_ON_ONCE((s16)p->migration_disabled <= 0))
include/linux/sched.h-2454- return;
--
include/linux/sched.h-2456-
include/linux/sched.h:2457: if (p->migration_disabled > 1) {
include/linux/sched.h:2458: p->migration_disabled--;
include/linux/sched.h-2459- return;
--
include/linux/sched.h-2469- /*
include/linux/sched.h:2470: * Mustn't clear migration_disabled() until cpus_ptr points back at the
include/linux/sched.h-2471- * regular cpus_mask, otherwise things that race (eg.
--
include/linux/sched.h-2474- barrier();
include/linux/sched.h:2475: p->migration_disabled = 0;
include/linux/sched.h-2476- this_rq_pinned()--;
--
include/linux/sched.h=2479=static inline void __migrate_disable(void)
--
include/linux/sched.h-2482-
include/linux/sched.h:2483: if (p->migration_disabled) {
include/linux/sched.h-2484-#ifdef CONFIG_DEBUG_PREEMPT
--
include/linux/sched.h-2487- */
include/linux/sched.h:2488: WARN_ON_ONCE((s16)p->migration_disabled < 0);
include/linux/sched.h-2489-#endif
include/linux/sched.h:2490: p->migration_disabled++;
include/linux/sched.h-2491- return;
--
include/linux/sched.h-2495- this_rq_pinned()++;
include/linux/sched.h:2496: p->migration_disabled = 1;
include/linux/sched.h-2497-}
]
|
| 13/2 |
2026/11/18 07:14 |
llm |
expert |
0m
Model:
Tokens:
input: 12465
output: 22
thoughts: 895
Thoughts: **Analyzing a KCSAN Report: An Interrupting Insight**
Okay, let's break this down. First, I'm looking at this KCSAN report, specifically the part showing a race condition. I immediately see the key elements: both accesses, the read *and* the write, involve task 5403 on CPU 0 at the same memory address, `0xffff8881017e95b8`. Hmm, interesting. Now, my radar's up. The report indicates this task on this CPU is executing `__migrate_disable`, specifically setting `p->migration_disabled = 1;` on line 2496. Naturally, the instrumented kernel is intercepting this write using KCSAN and setting up a watchpoint, which then results in a delay.
Ah, I see it now. While KCSAN is in the `delay_access` function, delaying within `kcsan_setup_watchpoint` for `p->migration_disabled = 1;`, a timer interrupt fires! And crucially, it also runs on CPU 0! During the exit from the interrupt, it calls `tracing_gen_ctx_irq_test`, which eventually reads the `current->migration_disabled` value.
Wait a second... it's the *same* task and *same* CPU (`task 5403 on cpu 0`) in *both* stack traces. That's unusual, right? This means the interrupt is actually interrupting the same task that established the watchpoint on the same CPU! I need to pause here and think: KCSAN can detect races between a task and an interrupt on the same CPU, or is KCSAN reporting when an interrupt accesses a memory location that has an active watchpoint on the same CPU? This is potentially insightful. KCSAN can handle this situation!
Now, the important part: why is the tracing infrastructure reading `current->migration_disabled`? Let's check `tracing_gen_ctx_irq_test`. I can see `migration_disable_value` is called there, which returns `current->migration_disabled` under `CONFIG_SMP`. So, it appears that the `tracing_gen_ctx` function is recording trace context flags including `migration_disable_value` (preempt count, irq flags, need resched, migration disable count) into the ring buffer event header. This might be a benign read, but needs further investigation. I must check the context. Is this a *real* race, or is this benign? Perhaps it's harmless or maybe, in some situations, it could be harmful. I should search the git log or do some codesearching for `tracing_gen_ctx` or `migration_disable_value` to further understand the context.
|
| 14/2 |
2026/11/18 07:15 |
tool |
git-log |
10m
Error:
Args: map[CodeRegexp:migration_disable_value]
Results:
|
| 15/2 |
2026/11/18 07:25 |
llm |
expert |
0m
Model:
Tokens:
input: 14012
output: 32
thoughts: 12
Thoughts: Here's a summary of my immediate thought process:
**Adding a Path Prefix: `kernel/trace/`**
Okay, so I'm looking at this configuration, and the first thing that jumps out at me is the need to organize this trace data. I'm thinking about how the system currently handles tracing and I'm realizing that we need a clear and structured way to identify and access these trace-related resources. The obvious solution is to introduce a path prefix. Specifically, I'm leaning towards `kernel/trace/`. This prefix will provide an immediate and consistent way to categorize these endpoints. It will allow me to quickly distinguish them from other, non-tracing related paths, and make searching and filtering significantly easier. This is a solid, straightforward change that will improve the maintainability and readability of the whole system.
|
| 16/2 |
2026/11/18 07:25 |
tool |
git-log |
0m
Args: map[CodeRegexp:migration_disable_value PathPrefix:kernel/trace/]
Results: map[Output:54357f0c9149 tracing: Add migrate-disabled counter to tracing output.
]
|
| 17/2 |
2026/11/18 07:25 |
llm |
expert |
0m
Model:
Tokens:
input: 14265
output: 27
thoughts: 20
Thoughts: Okay, let's dive into this. Here's my take on commit `54357f0c9149`.
**Analyzing Commit 54357f0c9149**
Alright, let's break this down. My immediate focus is on understanding the scope and implications of this particular commit, `54357f0c9149`. I need to assess what changes were made, why they were made, and how they interact with the existing codebase. My experience tells me that just knowing the commit hash is rarely enough; I'll need to scrutinize the diffs, paying close attention to any edge cases or unexpected side effects. I'll be looking for potential regressions, performance impacts, and, of course, whether the changes align with the overall project goals and architecture. My analysis will hinge on both the immediate impact of this code and its possible long-term effect.
|
| 18/2 |
2026/11/18 07:25 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 54357f0c9149c871e5e4b83ad385a6f2ad3a749f
Author: Thomas Gleixner <tglx@kernel.org>
Date: Tue Aug 10 15:26:25 2021 +0200
tracing: Add migrate-disabled counter to tracing output.
migrate_disable() forbids task migration to another CPU. It is available
since v5.11 and has already users such as highmem or BPF. It is useful
to observe this task state in tracing which already has other states
like the preemption counter.
Instead of adding the migrate disable counter as a new entry to struct
trace_entry, which would extend the whole struct by four bytes, it is
squashed into the preempt-disable counter. The lower four bits represent
the preemption counter, the upper four bits represent the migrate
disable counter. Both counter shouldn't exceed 15 but if they do, there
is a safety net which caps the value at 15.
Add the migrate-disable counter to the trace entry so it shows up in the
trace. Due to the users mentioned above, it is already possible to
observe it:
| bash-1108 [000] ...21 73.950578: rss_stat: mm_id=2213312838 curr=0 type=MM_ANONPAGES size=8192B
| bash-1108 [000] d..31 73.951222: irq_disable: caller=flush_tlb_mm_range+0x115/0x130 parent=ptep_clear_flush+0x42/0x50
| bash-1108 [000] d..31 73.951222: tlb_flush: pages:1 reason:local mm shootdown (3)
The last value is the migrate-disable counter.
Things that popped up:
- trace_print_lat_context() does not print the migrate counter. Not sure
if it should. It is used in "verbose" mode and uses 8 digits and I'm
not sure ther is something processing the value.
- trace_define_common_fields() now defines a different variable. This
probably breaks things. No ide what to do in order to preserve the old
behaviour. Since this is used as a filter it should be split somehow
to be able to match both nibbles here.
Link: https://lkml.kernel.org/r/20210810132625.ylssabmsrkygokuv@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: patch description.]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ SDR: Removed change to common_preempt_count field name ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 489924cde4f8..b554e18924f8 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2603,6 +2603,15 @@ enum print_line_t trace_handle_return(struct trace_seq *s)
}
EXPORT_SYMBOL_GPL(trace_handle_return);
+static unsigned short migration_disable_value(void)
+{
+#if defined(CONFIG_SMP)
+ return current->migration_disabled;
+#else
+ return 0;
+#endif
+}
+
unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
{
unsigned int trace_flags = irqs_status;
@@ -2621,7 +2630,8 @@ unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
trace_flags |= TRACE_FLAG_NEED_RESCHED;
if (test_preempt_need_resched())
trace_flags |= TRACE_FLAG_PREEMPT_RESCHED;
- return (trace_flags << 16) | (pc & 0xff);
+ return (trace_flags << 16) | (min_t(unsigned int, pc & 0xff, 0xf)) |
+ (min_t(unsigned int, migration_disable_value(), 0xf)) << 4;
}
struct ring_buffer_event *
@@ -4189,9 +4199,10 @@ static void print_lat_help_header(struct seq_file *m)
"# | / _----=> need-resched \n"
"# || / _---=> hardirq/softirq \n"
"# ||| / _--=> preempt-depth \n"
- "# |||| / delay \n"
- "# cmd pid ||||| time | caller \n"
- "# \\ / ||||| \\ | / \n");
+ "# |||| / _-=> migrate-disable \n"
+ "# ||||| / delay \n"
+ "# cmd pid |||||| time | caller \n"
+ "# \\ / |||||| \\ | / \n");
}
static void print_event_info(struct array_buffer *buf, struct seq_file *m)
@@ -4229,9 +4240,10 @@ static void print_func_help_header_irq(struct array_buffer *buf, struct seq_file
seq_printf(m, "# %.*s / _----=> need-resched\n", prec, space);
seq_printf(m, "# %.*s| / _---=> hardirq/softirq\n", prec, space);
seq_printf(m, "# %.*s|| / _--=> preempt-depth\n", prec, space);
- seq_printf(m, "# %.*s||| / delay\n", prec, space);
- seq_printf(m, "# TASK-PID %.*s CPU# |||| TIMESTAMP FUNCTION\n", prec, " TGID ");
- seq_printf(m, "# | | %.*s | |||| | |\n", prec, " | ");
+ seq_printf(m, "# %.*s||| / _-=> migrate-disable\n", prec, space);
+ seq_printf(m, "# %.*s|||| / delay\n", prec, space);
+ seq_printf(m, "# TASK-PID %.*s CPU# ||||| TIMESTAMP FUNCTION\n", prec, " TGID ");
+ seq_printf(m, "# | | %.*s | ||||| | |\n", prec, " | ");
}
void
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 1349b6de5eeb..830b3b9940f4 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -181,6 +181,7 @@ static int trace_define_common_fields(void)
__common_field(unsigned short, type);
__common_field(unsigned char, flags);
+ /* Holds both preempt_count and migrate_disable */
__common_field(unsigned char, preempt_count);
__common_field(int, pid);
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index a0bf446bb034..c2ca40e8595b 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -492,8 +492,13 @@ int trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry)
trace_seq_printf(s, "%c%c%c",
irqs_off, need_resched, hardsoft_irq);
- if (entry->preempt_count)
- trace_seq_printf(s, "%x", entry->preempt_count);
+ if (entry->preempt_count & 0xf)
+ trace_seq_printf(s, "%x", entry->preempt_count & 0xf);
+ else
+ trace_seq_putc(s, '.');
+
+ if (entry->preempt_count & 0xf0)
+ trace_seq_printf(s, "%x", entry->preempt_count >> 4);
else
trace_seq_putc(s, '.');
@@ -656,7 +661,7 @@ int trace_print_lat_context(struct trace_iterator *iter)
trace_seq_printf(
s, "%16s %7d %3d %d %08x %08lx ",
comm, entry->pid, iter->cpu, entry->flags,
- entry->preempt_count, iter->idx);
+ entry->preempt_count & 0xf, iter->idx);
} else {
lat_print_generic(s, entry, iter->cpu);
}
]
|
| 19/2 |
2026/11/18 07:25 |
llm |
expert |
0m
Model:
Tokens:
input: 16980
output: 19
thoughts: 219
Thoughts: **Tracing Diagnostic Value Investigation**
Okay, here's what I've got. I'm looking at this code and, aha! `migration_disable_value` is solely dedicated to trace diagnostics output. That's immediately interesting, seeing as it is used to store `current->migration_disabled` on SMP systems.
I see that `migration_disable_value` feeds into `tracing_gen_ctx_irq_test`. And that function, I remember, is responsible for crafting the `trace_entry`'s diagnostic context, specifically setting the preempt_count field. It's cleverly combining various pieces of information β trace flags, a masked program counter, and critically, the output from `migration_disable_value` itself. This bit is used to indicate the migration status during the trace event.
Now, I need to know the bigger picture. I'll check the usage of `tracing_gen_ctx_irq_test` as well to confirm my understanding of this field and ensure there are no surprises with the use of the `migration_disable_value` function.
|
| 20/2 |
2026/11/18 07:25 |
tool |
grepper |
0m
Args: map[Expression:migration_disable_value]
Results: map[Output:kernel/trace/trace.c=1713=EXPORT_SYMBOL_GPL(trace_handle_return);
kernel/trace/trace.c-1714-
kernel/trace/trace.c:1715:static unsigned short migration_disable_value(void)
kernel/trace/trace.c-1716-{
--
kernel/trace/trace.c=1724=unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
--
kernel/trace/trace.c-1746- return (trace_flags << 16) | (min_t(unsigned int, pc & 0xff, 0xf)) |
kernel/trace/trace.c:1747: (min_t(unsigned int, migration_disable_value(), 0xf)) << 4;
kernel/trace/trace.c-1748-}
]
|
| 21/2 |
2026/11/18 07:25 |
llm |
expert |
0m
Model:
Tokens:
input: 17676
output: 17
thoughts: 55
Thoughts: **Analyzing `p->migration_disabled` Concurrency**
Okay, so I'm looking at this snippet, and my initial thought is, "This specific variable, `p->migration_disabled`, is only used in this one spot, right?" That's always my first check. Just to be sure, I need to dig deeper. My concern immediately jumps to concurrency, you know, how this might be accessed across different CPUs. So I'm thinking, "Can this be accessed concurrently across different CPUs?"
To be absolutely certain, I need to know *exactly* who's touching `p->migration_disabled`. I have to trace all potential interactions. Alright, let's track down every single instance where `migration_disabled` is being read or written. I'm going to look at all accesses to `migration_disabled` within this code base now. This is where the real work begins. I can't be too careful with this.
|
| 22/2 |
2026/11/18 07:25 |
tool |
grepper |
0m
Args: map[Expression:migration_disabled]
Results: map[Output:
Full output is too long, showing 200 out of 388 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (16 files in total):
include/linux/sched.h:10
kernel/sched/core.c:18
kernel/sched/deadline.c:4
kernel/sched/ext/ext.c:5
kernel/sched/ext/idle.c:13
kernel/sched/ext/internal.h:1
kernel/sched/ext/sub.c:2
kernel/sched/ext/sub.h:1
kernel/sched/rt.c:4
kernel/sched/sched.h:3
kernel/trace/trace.c:1
lib/locking-selftest.c:2
lib/smp_processor_id.c:1
tools/sched_ext/include/scx/common.bpf.h:14
tools/sched_ext/scx_central.bpf.c:2
tools/testing/selftests/sched_ext/dsp_local_on.bpf.c:1
include/linux/sched.h=836=struct task_struct {
--
include/linux/sched.h-947- void *migration_pending;
include/linux/sched.h:948: unsigned short migration_disabled;
include/linux/sched.h-949- unsigned short migration_flags;
--
include/linux/sched.h=2444=static inline void __migrate_enable(void)
--
include/linux/sched.h-2452- */
include/linux/sched.h:2453: if (WARN_ON_ONCE((s16)p->migration_disabled <= 0))
include/linux/sched.h-2454- return;
--
include/linux/sched.h-2456-
include/linux/sched.h:2457: if (p->migration_disabled > 1) {
include/linux/sched.h:2458: p->migration_disabled--;
include/linux/sched.h-2459- return;
--
include/linux/sched.h-2469- /*
include/linux/sched.h:2470: * Mustn't clear migration_disabled() until cpus_ptr points back at the
include/linux/sched.h-2471- * regular cpus_mask, otherwise things that race (eg.
--
include/linux/sched.h-2474- barrier();
include/linux/sched.h:2475: p->migration_disabled = 0;
include/linux/sched.h-2476- this_rq_pinned()--;
--
include/linux/sched.h=2479=static inline void __migrate_disable(void)
--
include/linux/sched.h-2482-
include/linux/sched.h:2483: if (p->migration_disabled) {
include/linux/sched.h-2484-#ifdef CONFIG_DEBUG_PREEMPT
--
include/linux/sched.h-2487- */
include/linux/sched.h:2488: WARN_ON_ONCE((s16)p->migration_disabled < 0);
include/linux/sched.h-2489-#endif
include/linux/sched.h:2490: p->migration_disabled++;
include/linux/sched.h-2491- return;
--
include/linux/sched.h-2495- this_rq_pinned()++;
include/linux/sched.h:2496: p->migration_disabled = 1;
include/linux/sched.h-2497-}
--
kernel/sched/core.c=2471=static void migrate_disable_switch(struct rq *rq, struct task_struct *p)
--
kernel/sched/core.c-2477-
kernel/sched/core.c:2478: if (likely(!p->migration_disabled))
kernel/sched/core.c-2479- return;
--
kernel/sched/core.c=2539=static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
--
kernel/sched/core.c-2545- /* migrate_disabled() must be allowed to finish. */
kernel/sched/core.c:2546: if (is_migration_disabled(p))
kernel/sched/core.c-2547- return cpu_online(cpu);
--
kernel/sched/core.c=2657=static int migration_cpu_stop(void *data)
--
kernel/sched/core.c-2698- if (task_rq(p) == rq) {
kernel/sched/core.c:2699: if (is_migration_disabled(p))
kernel/sched/core.c-2700- goto out;
--
kernel/sched/core.c-2746- * When migrate_enable() hits a rq mis-match we can't reliably
kernel/sched/core.c:2747: * determine is_migration_disabled() and so have to chase after
kernel/sched/core.c-2748- * it.
--
kernel/sched/core.c=2771=int push_cpu_stop(void *arg)
--
kernel/sched/core.c-2781-
kernel/sched/core.c:2782: if (is_migration_disabled(p)) {
kernel/sched/core.c-2783- p->migration_flags |= MDF_PUSH;
--
kernel/sched/core.c=2924=void release_user_cpus_ptr(struct task_struct *p)
--
kernel/sched/core.c-2994- * migration_cpu_stop()
kernel/sched/core.c:2995: * is_migration_disabled()
kernel/sched/core.c-2996- * <bails>
--
kernel/sched/core.c=3005=static int affine_move_task(struct rq *rq, struct task_struct *p, struct rq_flags *rf,
--
kernel/sched/core.c-3100- * MIGRATE_ENABLE gets here because 'p == current', but for
kernel/sched/core.c:3101: * anything else we cannot do is_migration_disabled(), punt
kernel/sched/core.c-3102- * and have the stopper function handle it all race-free.
--
kernel/sched/core.c-3122-
kernel/sched/core.c:3123: if (!is_migration_disabled(p)) {
kernel/sched/core.c-3124- if (task_on_rq_queued(p))
--
kernel/sched/core.c=3158=static int __set_cpus_allowed_ptr_locked(struct task_struct *p,
--
kernel/sched/core.c-3169-
kernel/sched/core.c:3170: if (kthread || is_migration_disabled(p)) {
kernel/sched/core.c-3171- /*
--
kernel/sched/core.c-3175- *
kernel/sched/core.c:3176: * Specifically, migration_disabled() tasks must not fail the
kernel/sched/core.c-3177- * cpumask_any_and_distribute() pick below, esp. so on
--
kernel/sched/core.c-3205- if (WARN_ON_ONCE(p == current &&
kernel/sched/core.c:3206: is_migration_disabled(p) &&
kernel/sched/core.c-3207- !cpumask_test_cpu(task_cpu(p), ctx->new_mask))) {
--
kernel/sched/core.c=3387=void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
--
kernel/sched/core.c-3431- */
kernel/sched/core.c:3432: WARN_ON_ONCE(is_migration_disabled(p) && !proxy_migrated);
kernel/sched/core.c-3433-
--
kernel/sched/core.c=3667=int select_task_rq(struct task_struct *p, int cpu, int *wake_flags)
--
kernel/sched/core.c-3670-
kernel/sched/core.c:3671: if (p->nr_cpus_allowed > 1 && !is_migration_disabled(p)) {
kernel/sched/core.c-3672- cpu = p->sched_class->select_task_rq(p, cpu, *wake_flags);
--
kernel/sched/core.c=8435=static void balance_push(struct rq *rq)
--
kernel/sched/core.c-8458- if (kthread_is_per_cpu(push_task) ||
kernel/sched/core.c:8459: is_migration_disabled(push_task)) {
kernel/sched/core.c-8460-
--
kernel/sched/core.c=9233=void __cant_migrate(const char *file, int line)
--
kernel/sched/core.c-9239-
kernel/sched/core.c:9240: if (is_migration_disabled(current))
kernel/sched/core.c-9241- return;
--
kernel/sched/core.c-9253- pr_err("BUG: assuming non migratable context at %s:%d\n", file, line);
kernel/sched/core.c:9254: pr_err("in_atomic(): %d, irqs_disabled(): %d, migration_disabled() %u pid: %d, name: %s\n",
kernel/sched/core.c:9255: in_atomic(), irqs_disabled(), is_migration_disabled(current),
kernel/sched/core.c-9256- current->pid, current->comm);
--
kernel/sched/core.c=11345=void sched_push_current_non_preferred_cpu(struct rq *rq)
--
kernel/sched/core.c-11357-
kernel/sched/core.c:11358: if (is_migration_disabled(push_task))
kernel/sched/core.c-11359- return;
--
kernel/sched/deadline.c=3023=static struct task_struct *pick_next_pushable_dl_task(struct rq *rq)
--
kernel/sched/deadline.c-3034- /* skip tasks that cannot be migrated */
kernel/sched/deadline.c:3035: if (!task_on_cpu(rq, i) && !is_migration_disabled(i)) {
kernel/sched/deadline.c-3036- p = i;
--
kernel/sched/deadline.c=3057=static struct rq *find_lock_later_rq(struct task_struct *task, struct rq *rq)
--
kernel/sched/deadline.c-3103- */
kernel/sched/deadline.c:3104: if (unlikely(is_migration_disabled(task) ||
kernel/sched/deadline.c-3105- !cpumask_test_cpu(later_rq->cpu, &task->cpus_mask) ||
--
kernel/sched/deadline.c=3141=static int push_dl_task(struct rq *rq)
--
kernel/sched/deadline.c-3163-
kernel/sched/deadline.c:3164: if (is_migration_disabled(next_task))
kernel/sched/deadline.c-3165- return 0;
--
kernel/sched/deadline.c=3221=static void pull_dl_task(struct rq *this_rq)
--
kernel/sched/deadline.c-3283-
kernel/sched/deadline.c:3284: if (is_migration_disabled(p)) {
kernel/sched/deadline.c-3285- push_task = get_push_task(src_rq);
--
kernel/sched/ext/ext.c=391=static struct scx_dispatch_q *bypass_enq_target_dsq(struct scx_sched *sch, struct rq *rq,
--
kernel/sched/ext/ext.c-421- if (unlikely(scx_missing_caps(host, cpu_of(rq), SCX_CAP_BASE)) &&
kernel/sched/ext/ext.c:422: (scx_rescue_enabled() || is_migration_disabled(p) || p->migration_pending)) {
kernel/sched/ext/ext.c-423- *enq_flags |= SCX_ENQ_RESCUE;
--
kernel/sched/ext/ext.c=2247=void scx_do_enqueue_task(struct rq *rq, struct task_struct *p, u64 enq_flags,
--
kernel/sched/ext/ext.c-2333- if (!(sch->ops.flags & SCX_OPS_ENQ_MIGRATION_DISABLED) &&
kernel/sched/ext/ext.c:2334: is_migration_disabled(p)) {
kernel/sched/ext/ext.c-2335- __scx_add_event(sch, SCX_EV_ENQ_SKIP_MIGRATION_DISABLED, 1);
--
kernel/sched/ext/ext.c=2814=static bool task_can_run_on_remote_rq(struct scx_sched *sch,
--
kernel/sched/ext/ext.c-2851- */
kernel/sched/ext/ext.c:2852: if (unlikely(is_migration_disabled(p))) {
kernel/sched/ext/ext.c-2853- if (enforce)
--
kernel/sched/ext/ext.c=2913=static bool task_proxy_unsafe_to_move(struct task_struct *p)
--
kernel/sched/ext/ext.c-2917-
kernel/sched/ext/ext.c:2918: return task_proxy_running_or_donating(p) || is_migration_disabled(p);
kernel/sched/ext/ext.c-2919-}
--
kernel/sched/ext/ext.c=7941=static void scx_dump_task(struct scx_sched *sch, struct seq_buf *s, struct scx_dump_ctx *dctx,
--
kernel/sched/ext/ext.c-7976- scx_dump_line(s, " cpus=%*pb no_mig=%u", cpumask_pr_args(p->cpus_ptr),
kernel/sched/ext/ext.c:7977: p->migration_disabled);
kernel/sched/ext/ext.c-7978-
--
kernel/sched/ext/idle.c=923=static bool check_builtin_idle_enabled(struct scx_sched *sch)
--
kernel/sched/ext/idle.c-935- *
kernel/sched/ext/idle.c:936: * We can't simply check whether @p->migration_disabled is set in a
kernel/sched/ext/idle.c-937- * sched_ext callback, because the BPF prolog (__bpf_prog_enter) may disable
--
kernel/sched/ext/idle.c-940- * Since the BPF prolog calls migrate_disable() only when CONFIG_PREEMPT_RCU
kernel/sched/ext/idle.c:941: * is enabled (via rcu_read_lock_dont_migrate()), migration_disabled == 1 for
kernel/sched/ext/idle.c-942- * the current task is ambiguous only in that case: it could be from the BPF
--
kernel/sched/ext/idle.c-945- * Without CONFIG_PREEMPT_RCU, the BPF prolog never calls migrate_disable(),
kernel/sched/ext/idle.c:946: * so migration_disabled == 1 always means the task is truly
]
|
| 23/2 |
2026/11/18 07:25 |
llm |
expert |
0m
Model:
Tokens:
input: 22043
output: 35
thoughts: 11
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and rendered in the first person:
**Checking Migration Status**
Right, let's just make sure we're not running migrations on a disabled system. Need to quickly verify the status of `is_migration_disabled`. Gotta be absolutely certain before proceeding. No surprises later. We've all seen the impact of unintended migrations in production. Better to be safe than sorry. Let's get that variable checked, right now.
|
| 24/2 |
2026/11/18 07:26 |
tool |
grepper |
0m
Args: map[Expression:is_migration_disabled PathPrefixes:[include/ kernel/sched/]]
Results: map[Output:kernel/sched/core.c=2539=static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
--
kernel/sched/core.c-2545- /* migrate_disabled() must be allowed to finish. */
kernel/sched/core.c:2546: if (is_migration_disabled(p))
kernel/sched/core.c-2547- return cpu_online(cpu);
--
kernel/sched/core.c=2657=static int migration_cpu_stop(void *data)
--
kernel/sched/core.c-2698- if (task_rq(p) == rq) {
kernel/sched/core.c:2699: if (is_migration_disabled(p))
kernel/sched/core.c-2700- goto out;
--
kernel/sched/core.c-2746- * When migrate_enable() hits a rq mis-match we can't reliably
kernel/sched/core.c:2747: * determine is_migration_disabled() and so have to chase after
kernel/sched/core.c-2748- * it.
--
kernel/sched/core.c=2771=int push_cpu_stop(void *arg)
--
kernel/sched/core.c-2781-
kernel/sched/core.c:2782: if (is_migration_disabled(p)) {
kernel/sched/core.c-2783- p->migration_flags |= MDF_PUSH;
--
kernel/sched/core.c=2924=void release_user_cpus_ptr(struct task_struct *p)
--
kernel/sched/core.c-2994- * migration_cpu_stop()
kernel/sched/core.c:2995: * is_migration_disabled()
kernel/sched/core.c-2996- * <bails>
--
kernel/sched/core.c=3005=static int affine_move_task(struct rq *rq, struct task_struct *p, struct rq_flags *rf,
--
kernel/sched/core.c-3100- * MIGRATE_ENABLE gets here because 'p == current', but for
kernel/sched/core.c:3101: * anything else we cannot do is_migration_disabled(), punt
kernel/sched/core.c-3102- * and have the stopper function handle it all race-free.
--
kernel/sched/core.c-3122-
kernel/sched/core.c:3123: if (!is_migration_disabled(p)) {
kernel/sched/core.c-3124- if (task_on_rq_queued(p))
--
kernel/sched/core.c=3158=static int __set_cpus_allowed_ptr_locked(struct task_struct *p,
--
kernel/sched/core.c-3169-
kernel/sched/core.c:3170: if (kthread || is_migration_disabled(p)) {
kernel/sched/core.c-3171- /*
--
kernel/sched/core.c-3205- if (WARN_ON_ONCE(p == current &&
kernel/sched/core.c:3206: is_migration_disabled(p) &&
kernel/sched/core.c-3207- !cpumask_test_cpu(task_cpu(p), ctx->new_mask))) {
--
kernel/sched/core.c=3387=void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
--
kernel/sched/core.c-3431- */
kernel/sched/core.c:3432: WARN_ON_ONCE(is_migration_disabled(p) && !proxy_migrated);
kernel/sched/core.c-3433-
--
kernel/sched/core.c=3667=int select_task_rq(struct task_struct *p, int cpu, int *wake_flags)
--
kernel/sched/core.c-3670-
kernel/sched/core.c:3671: if (p->nr_cpus_allowed > 1 && !is_migration_disabled(p)) {
kernel/sched/core.c-3672- cpu = p->sched_class->select_task_rq(p, cpu, *wake_flags);
--
kernel/sched/core.c=8435=static void balance_push(struct rq *rq)
--
kernel/sched/core.c-8458- if (kthread_is_per_cpu(push_task) ||
kernel/sched/core.c:8459: is_migration_disabled(push_task)) {
kernel/sched/core.c-8460-
--
kernel/sched/core.c=9233=void __cant_migrate(const char *file, int line)
--
kernel/sched/core.c-9239-
kernel/sched/core.c:9240: if (is_migration_disabled(current))
kernel/sched/core.c-9241- return;
--
kernel/sched/core.c-9254- pr_err("in_atomic(): %d, irqs_disabled(): %d, migration_disabled() %u pid: %d, name: %s\n",
kernel/sched/core.c:9255: in_atomic(), irqs_disabled(), is_migration_disabled(current),
kernel/sched/core.c-9256- current->pid, current->comm);
--
kernel/sched/core.c=11345=void sched_push_current_non_preferred_cpu(struct rq *rq)
--
kernel/sched/core.c-11357-
kernel/sched/core.c:11358: if (is_migration_disabled(push_task))
kernel/sched/core.c-11359- return;
--
kernel/sched/deadline.c=3023=static struct task_struct *pick_next_pushable_dl_task(struct rq *rq)
--
kernel/sched/deadline.c-3034- /* skip tasks that cannot be migrated */
kernel/sched/deadline.c:3035: if (!task_on_cpu(rq, i) && !is_migration_disabled(i)) {
kernel/sched/deadline.c-3036- p = i;
--
kernel/sched/deadline.c=3057=static struct rq *find_lock_later_rq(struct task_struct *task, struct rq *rq)
--
kernel/sched/deadline.c-3103- */
kernel/sched/deadline.c:3104: if (unlikely(is_migration_disabled(task) ||
kernel/sched/deadline.c-3105- !cpumask_test_cpu(later_rq->cpu, &task->cpus_mask) ||
--
kernel/sched/deadline.c=3141=static int push_dl_task(struct rq *rq)
--
kernel/sched/deadline.c-3163-
kernel/sched/deadline.c:3164: if (is_migration_disabled(next_task))
kernel/sched/deadline.c-3165- return 0;
--
kernel/sched/deadline.c=3221=static void pull_dl_task(struct rq *this_rq)
--
kernel/sched/deadline.c-3283-
kernel/sched/deadline.c:3284: if (is_migration_disabled(p)) {
kernel/sched/deadline.c-3285- push_task = get_push_task(src_rq);
--
kernel/sched/ext/ext.c=391=static struct scx_dispatch_q *bypass_enq_target_dsq(struct scx_sched *sch, struct rq *rq,
--
kernel/sched/ext/ext.c-421- if (unlikely(scx_missing_caps(host, cpu_of(rq), SCX_CAP_BASE)) &&
kernel/sched/ext/ext.c:422: (scx_rescue_enabled() || is_migration_disabled(p) || p->migration_pending)) {
kernel/sched/ext/ext.c-423- *enq_flags |= SCX_ENQ_RESCUE;
--
kernel/sched/ext/ext.c=2247=void scx_do_enqueue_task(struct rq *rq, struct task_struct *p, u64 enq_flags,
--
kernel/sched/ext/ext.c-2333- if (!(sch->ops.flags & SCX_OPS_ENQ_MIGRATION_DISABLED) &&
kernel/sched/ext/ext.c:2334: is_migration_disabled(p)) {
kernel/sched/ext/ext.c-2335- __scx_add_event(sch, SCX_EV_ENQ_SKIP_MIGRATION_DISABLED, 1);
--
kernel/sched/ext/ext.c=2814=static bool task_can_run_on_remote_rq(struct scx_sched *sch,
--
kernel/sched/ext/ext.c-2851- */
kernel/sched/ext/ext.c:2852: if (unlikely(is_migration_disabled(p))) {
kernel/sched/ext/ext.c-2853- if (enforce)
--
kernel/sched/ext/ext.c=2913=static bool task_proxy_unsafe_to_move(struct task_struct *p)
--
kernel/sched/ext/ext.c-2917-
kernel/sched/ext/ext.c:2918: return task_proxy_running_or_donating(p) || is_migration_disabled(p);
kernel/sched/ext/ext.c-2919-}
--
kernel/sched/ext/sub.c=900=struct scx_dispatch_q *__scx_resolve_local_dsq(struct scx_sched *sch, struct rq *rq,
--
kernel/sched/ext/sub.c-926- */
kernel/sched/ext/sub.c:927: if (unlikely(!scx_rq_online(rq) || is_migration_disabled(p) ||
kernel/sched/ext/sub.c-928- p->migration_pending)) {
--
kernel/sched/ext/sub.c=961=bool scx_task_reenq_on_cap_revoke(struct rq *rq, struct task_struct *p)
--
kernel/sched/ext/sub.c-966- /* migration-disabled tasks and the rescuee are admitted capless */
kernel/sched/ext/sub.c:967: if (is_migration_disabled(p) || p == scx_rescuee(rq))
kernel/sched/ext/sub.c-968- return false;
--
kernel/sched/ext/sub.h=239=static inline bool scx_task_can_stay_on_cpu(struct rq *rq, struct task_struct *p)
--
kernel/sched/ext/sub.h-246- /* a migration-disabled task is let in without caps, keep it likewise */
kernel/sched/ext/sub.h:247: if (unlikely(is_migration_disabled(p)))
kernel/sched/ext/sub.h-248- return true;
--
kernel/sched/rt.c=1869=static struct task_struct *pick_next_pushable_task(struct rq *rq)
--
kernel/sched/rt.c-1878- /* skip tasks that cannot be migrated */
kernel/sched/rt.c:1879: if (!task_on_cpu(rq, i) && !is_migration_disabled(i)) {
kernel/sched/rt.c-1880- p = i;
--
kernel/sched/rt.c=1900=static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
--
kernel/sched/rt.c-1935- */
kernel/sched/rt.c:1936: if (unlikely(is_migration_disabled(task) ||
kernel/sched/rt.c-1937- !cpumask_test_cpu(lowest_rq->cpu, &task->cpus_mask) ||
--
kernel/sched/rt.c=1963=static int push_rt_task(struct rq *rq, bool pull)
--
kernel/sched/rt.c-1986-
kernel/sched/rt.c:1987: if (is_migration_disabled(next_task)) {
kernel/sched/rt.c-1988- struct task_struct *push_task = NULL;
--
kernel/sched/rt.c=2264=static void pull_rt_task(struct rq *this_rq)
--
kernel/sched/rt.c-2342-
kernel/sched/rt.c:2343: if (is_migration_disabled(p)) {
kernel/sched/rt.c-2344- push_task = get_push_task(src_rq);
--
kernel/sched/sched.h=1437=static inline int cpu_of(struct rq *rq)
--
kernel/sched/sched.h-1443-
kernel/sched/sched.h:1444:static inline bool is_migration_disabled(struct task_struct *p)
kernel/sched/sched.h-1445-{
]
|
| 25/2 |
2026/11/18 07:26 |
llm |
expert |
0m
Model:
Tokens:
input: 25640
output: 36
thoughts: 18
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into the Scheduler's Heart**
Okay, time to get to the core of the problem. My intuition is telling me that the issue might be lurking within the scheduler's logic, so I'm immediately homing in on the relevant header file. Specifically, I'm thinking that the section dealing with scheduling decisions is likely key. `kernel/sched/sched.h:1444`... that line number sticks out as a likely point of interest, probably defining a structure, macro, or function related to how the kernel *actually* picks the next runnable task. This is the starting point. I'll need to see how the code around that line interacts with the scheduler's overall logic and, depending on the particular variable or statement at that point, work back from there. Hopefully, that will get me some kind of high-level insight into what's happening.
|
| 26/2 |
2026/11/18 07:26 |
tool |
read-file |
0m
Args: map[File:kernel/sched/sched.h FirstLine:1440 LineCount:20]
Results: map[Contents:1440: }
1441:
1442: #define MDF_PUSH 0x01
1443:
1444: static inline bool is_migration_disabled(struct task_struct *p)
1445: {
1446: return p->migration_disabled;
1447: }
1448:
1449: DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
1450: DECLARE_PER_CPU(struct rnd_state, sched_rnd_state);
1451:
1452: static inline u32 sched_rng(void)
1453: {
1454: return prandom_u32_state(this_cpu_ptr(&sched_rnd_state));
1455: }
1456:
1457: static __always_inline struct rq *__this_rq(void)
1458: {
1459: return this_cpu_ptr(&runqueues);
]
|
| 27/2 |
2026/11/18 07:26 |
llm |
expert |
0m
Model:
Tokens:
input: 26184
output: 36
thoughts: 1151
Thoughts: **Analyzing a Potential KCSAN Race Condition**
Okay, let's break this down. My initial thought was: the `p->migration_disabled` flag seems to be exclusively modified by the task itself, using functions like `__migrate_disable` and `__migrate_enable`. That's good, minimizes the potential for concurrent access. I reviewed the code: the inline functions use `current`, the currently executing task, making it seem isolated.
Then, I started thinking about reads. Obviously, the task itself reads and modifies it. I also found that tracing code uses `migration_disable_value()`, which reads `current->migration_disabled`. Tracing gets a bit involved, with `trace_event_buffer_reserve` leading to `tracing_gen_ctx_irq_test`, which ultimately calls `migration_disable_value()`. Crucially, this read is to record bits in a trace entry.
Now, a specific trace report caught my attention. Task 5403 was calling `migrate_disable`, and KCSAN (Kernel Concurrency Sanitizer) reported a write on `p->migration_disabled`. The write was instrumented by KCSAN and set up a watchpoint. The real kicker is that this was happening *during* an interrupt. The `guard(preempt)()` function *only* disables preemption, *not* interrupts. This means interrupts are enabled. A hardware timer interrupt fired on the same CPU, eventually leading to a tracepoint execution. That tracepoint, `msr_trace`, calls `migration_disable_value()`, which reads `current->migration_disabled`. Because the interrupt is on the same CPU, it's reading the same `current` task, so it's reading the value of `p->migration_disabled` which KCSAN had set a watchpoint on. So we see the KCSAN trigger! It's a race because the `p->migration_disabled` value is being changed and read at the same time!
The question now becomes: *could* another CPU read this value? I need to consider scenarios like the scheduler: `migration_cpu_stop`, `affine_move_task`, `push_cpu_stop`, `balance_push`, `set_task_cpu`, and RT/DL push/pull which might have to read or write this `p->migration_disabled` variable. Specifically, how do those functions and any interactions they have with `p->migration_disabled` deal with concurrency? The key function here is `is_migration_disabled(p)` in `kernel/sched/core.c`. I need to look closer at whether these schedular functions use the correct locking mechanisms. Are other CPUs potentially reading `p->migration_disabled` without sufficient synchronization? I need to analyze how it is used in those situations to determine if this race condition can happen.
|
| 28/2 |
2026/11/18 07:26 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:3095 LineCount:40]
Results: map[Contents:3095: return -EINVAL;
3096: }
3097:
3098: if (task_on_cpu(rq, p) || READ_ONCE(p->__state) == TASK_WAKING) {
3099: /*
3100: * MIGRATE_ENABLE gets here because 'p == current', but for
3101: * anything else we cannot do is_migration_disabled(), punt
3102: * and have the stopper function handle it all race-free.
3103: */
3104: stop_pending = pending->stop_pending;
3105: if (!stop_pending)
3106: pending->stop_pending = true;
3107:
3108: if (flags & SCA_MIGRATE_ENABLE)
3109: p->migration_flags &= ~MDF_PUSH;
3110:
3111: preempt_disable();
3112: task_rq_unlock(rq, p, rf);
3113: if (!stop_pending) {
3114: stop_one_cpu_nowait(cpu_of(rq), migration_cpu_stop,
3115: &pending->arg, &pending->stop_work);
3116: }
3117: preempt_enable();
3118:
3119: if (flags & SCA_MIGRATE_ENABLE)
3120: return 0;
3121: } else {
3122:
3123: if (!is_migration_disabled(p)) {
3124: if (task_on_rq_queued(p))
3125: rq = move_queued_task(rq, rf, p, dest_cpu);
3126:
3127: if (!pending->stop_pending) {
3128: p->migration_pending = NULL;
3129: complete = true;
3130: }
3131: }
3132: task_rq_unlock(rq, p, rf);
3133:
3134: if (complete)
]
|
| 29/2 |
2026/11/18 07:26 |
llm |
expert |
0m
Model:
Tokens:
input: 28559
output: 35
thoughts: 1778
Thoughts: **Analysis of a KCSAN Race Report Related to `migration_disabled` and Tracing**
Okay, let's break this down. Line 3100 gives some crucial context. `MIGRATE_ENABLE` is reached when `p` is the `current` task. We know `migration_cpu_stop` runs on the task's CPU. The key here is that when `task_rq_lock` is held, and `!task_on_cpu(rq, p)`, `p->migration_disabled` cannot change because `p` isn't running. This implies synchronization is in place.
Now, the KCSAN race report. It's flagging a race between `migration_disable_value` and `__migrate_disable`. Specifically, it's a read from `kernel/trace/trace.c` and a write in `include/linux/sched.h`. The critical part here is what `migration_disable_value` *does*: it returns `current->migration_disabled` which is an `unsigned short`.
Let's look at `tracing_gen_ctx_irq_test`. This function uses the `migration_disable_value()` result to populate the trace entry context for ftrace. It's essentially adding a migration disable counter to the trace output. It squashes the disable counter into the preempt counter, with the lower four bits for preemption, and upper four for migration disable count. The point is: it's diagnostics only!
We need to consider the classifications. According to the protocol instructions, this could be **BENIGN**. Specifically, it's a diagnostic read that is only used for trace output. Also, an aligned 16-bit access is atomic on modern architectures. Thus, tearing cannot occur during read.
So what's happening? Task 5403, during the interrupt, is in `__migrate_disable()`, where `migration_disabled` is set to 1. If the interrupt occurs *before* the store, the trace shows 0. If it occurs *after*, the trace shows 1. Either way, it's safe because there are no side effects other than output, and the trace records are aligned.
In summary, this race is **BENIGN** because:
1. It is a diagnostic read (only affects tracing output).
2. The read/write is for a 2-byte aligned integer, which is guaranteed to be atomic.
3. The value being traced is just a snapshot in time; the precise value observed doesn't matter, and a slightly stale value is safe.
The trace is just a snapshot, and its purpose is purely to provide information for debugging. It is used in ftrace in trace-cmd for debugging latency.
Let's see if there are any other places or if there's any git history / discussion about KCSAN in `migration_disable_value` or `current->migration_disabled`. Let's search git log.
|
| 30/2 |
2026/11/18 07:26 |
tool |
git-log |
0m
Args: map[CodeRegexp:migration_disabled Count:10 PathPrefix:kernel/trace/]
Results: map[Output:54357f0c9149 tracing: Add migrate-disabled counter to tracing output.
]
|
| 31/2 |
2026/11/18 07:26 |
llm |
expert |
0m
Model:
Tokens:
input: 31044
output: 26
thoughts: 24
Thoughts: Here's my thought process, summarized as you requested:
**Searching Kernel History for Migration Disabling**
Okay, let's get down to brass tacks. I need to understand the historical context surrounding features, and this time, it's about the disablement of migrations within the kernel. My immediate thought is to delve into the commit history. I want to pinpoint any instances where a specific term or phrase related to disabling migrations has been used. The most likely candidates for search terms are variations like `migration_disable_value` and `migration_disabled`. Using those terms should lead me directly to relevant discussions, patches, and the rationale behind those changes. This will enable me to build a comprehensive timeline and context for how these features came about.
|
| 32/2 |
2026/11/18 07:26 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[migration_disable_value]]
Results:
|
| 33/2 |
2026/11/18 07:27 |
llm |
expert |
0m
Model:
Tokens:
input: 31262
output: 31
thoughts: 19
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience, presented in the first person:
**Analyzing Commit Messages for `tracing_gen_ctx_irq_test`**
Alright, let's dive in. My immediate thought is to query the commit messages. I need to understand the evolution of anything related to `tracing_gen_ctx_irq_test`. This is likely a key string, a specific identifier for some functionality, test, or patch related to tracing and interrupt handling. I need to see how it's been introduced, modified, and potentially removed or refactored. The commit history is going to be invaluable here. I'm thinking I'll quickly need to filter the search results by author, date, and project to narrow down the relevant context. I'll need to look at adjacent commits as well, because those will inform how the changes associated with the string may affect other areas. I'm already anticipating that the results will inform the next step of my analysis, possibly to see the code changes or test results associated with these commits. It's a starting point for figuring out *why* and *how* `tracing_gen_ctx_irq_test` matters.
|
| 34/2 |
2026/11/18 07:27 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[tracing_gen_ctx_irq_test]]
Results: map[Output:18d92bb57c39 perf/core: Add aux_pause, aux_resume, aux_start_paused
]
|
| 35/2 |
2026/11/18 07:27 |
llm |
expert |
0m
Model:
Tokens:
input: 31612
output: 47
thoughts: 344
Thoughts: **Investigating Potential Data Races in Kernel Tracing**
Okay, so I'm digging into this `READ_ONCE` thing. I need to figure out if it's actually being used in the context of tracing or migration disablement, or if anyone's even considered it. Let's start by looking at `kernel/trace/trace.c:1715`. Ah, here's the `migration_disable_value()` function:
Wait a second⦠`current->migration_disabled`. Could *that* be a potential data race? Should it be annotated with `READ_ONCE`, or maybe even `data_race`? Using `READ_ONCE(current->migration_disabled)` would likely silence KCSAN, if that's the issue we're seeing.
Now, before I just slap a `READ_ONCE` on it, I need to understand if there's any actual risk. Is there any way `current->migration_disabled` can cause a bug if read concurrently? Does anything in the tracing code *depend* on its value beyond the straightforward write to the trace buffer?
Let's look at `tracing_gen_ctx_irq_test`. Ah, here we go:
Bingo! It's just packing the result of `migration_disable_value()` into `trace_ctx`. So it's used in the return value of `tracing_gen_ctx_irq_test()`, which is `trace_ctx`.
Now, where does `trace_ctx` go? I need to check every single reference to `tracing_gen_ctx_irq_test` within the code to be absolutely certain of the scope of this potentially problematic read.
|
| 36/2 |
2026/11/18 07:27 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:kernel/trace/trace.c IncludeSnippetLines:5 Name:tracing_gen_ctx_irq_test]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:tracing_gen_ctx_flags SourceFile:include/linux/trace_events.h SourceLine:204 SourceSnippet: 200: static inline unsigned int tracing_gen_ctx_flags(unsigned long irqflags)
201: {
202: unsigned int irq_status = irqs_disabled_flags(irqflags) ?
203: TRACE_FLAG_IRQS_OFF : 0;
204: return tracing_gen_ctx_irq_test(irq_status);
205: }
]] TruncatedOutput:false]
|
| 37/2 |
2026/11/18 07:27 |
llm |
expert |
0m
Model:
Tokens:
input: 32557
output: 37
thoughts: 34
Thoughts: Okay, let's dive into this. Here's my take on those thoughts:
**Dissecting `tracing_gen_ctx_flags` in `trace_events.h`**
Alright, let's get into the weeds of `tracing_gen_ctx_flags(unsigned long irqflags)` in `include/linux/trace_events.h`. I'm curious about the function's purpose, the context it operates in, and how it handles those `irqflags`. It's likely involved in capturing or manipulating context information, maybe related to interrupt status, for trace events. I want to understand how it interfaces with the broader tracing infrastructure and how its outputs are utilized downstream. What's the bitfield structure being used to decode the flags? What are the implications of the unsigned long type in terms of data width and architecture compatibility, and how does that influence the function's overall design choices? Ultimately, I want to see if there are any potential gotchas or optimizations that could be made, or perhaps to understand if there are specific use cases I can apply to a problem.
|
| 38/2 |
2026/11/18 07:27 |
tool |
read-file |
0m
Args: map[File:include/linux/trace_events.h FirstLine:195 LineCount:40]
Results: map[Contents: 195: TRACE_FLAG_PREEMPT_RESCHED = 0x20,
196: TRACE_FLAG_NMI = 0x40,
197: TRACE_FLAG_BH_OFF = 0x80,
198: };
199:
200: static inline unsigned int tracing_gen_ctx_flags(unsigned long irqflags)
201: {
202: unsigned int irq_status = irqs_disabled_flags(irqflags) ?
203: TRACE_FLAG_IRQS_OFF : 0;
204: return tracing_gen_ctx_irq_test(irq_status);
205: }
206: static inline unsigned int tracing_gen_ctx(void)
207: {
208: unsigned long irqflags;
209:
210: local_save_flags(irqflags);
211: return tracing_gen_ctx_flags(irqflags);
212: }
213:
214: static inline unsigned int tracing_gen_ctx_dec(void)
215: {
216: unsigned int trace_ctx;
217:
218: trace_ctx = tracing_gen_ctx();
219: /*
220: * Subtract one from the preemption counter if preemption is enabled,
221: * see trace_event_buffer_reserve()for details.
222: */
223: if (IS_ENABLED(CONFIG_PREEMPTION))
224: trace_ctx--;
225: return trace_ctx;
226: }
227:
228: struct trace_event_file;
229:
230: struct ring_buffer_event *
231: trace_event_buffer_lock_reserve(struct trace_buffer **current_buffer,
232: struct trace_event_file *trace_file,
233: int type, unsigned long len,
234: unsigned int trace_ctx);
]
|
| 39/2 |
2026/11/18 07:27 |
llm |
expert |
0m
Model:
Tokens:
input: 33450
output: 37
thoughts: 29
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Diving into the Trace Event Buffer**
Alright, time to get my hands dirty. I need to understand how the trace event buffer is being managed, so I'm heading directly to the source code. Let's start by zeroing in on `trace_event_buffer_reserve`. Specifically, I'm checking it at `kernel/trace/trace_events.c:720`. I want to see how this function handles buffer allocation. I need to consider all the details, to see how the buffer handles edge-cases, overflows and overall allocation state. What allocation strategy is being used? Is it pre-allocated, dynamic, or some hybrid approach? Are there any potential race conditions I should be looking out for, especially with multi-threaded environments? Understanding this reservation mechanism is fundamental to understanding overall trace performance. This is the bedrock to understanding potential bottlenecks and points for optimization within the tracing infrastructure. Let's see what's what.
|
| 40/2 |
2026/11/18 07:27 |
tool |
read-file |
0m
Args: map[File:kernel/trace/trace_events.c FirstLine:715 LineCount:35]
Results: map[Contents: 715: * If CONFIG_PREEMPTION is enabled, then the tracepoint itself disables
716: * preemption (adding one to the preempt_count). Since we are
717: * interested in the preempt_count at the time the tracepoint was
718: * hit, we need to subtract one to offset the increment.
719: */
720: fbuffer->trace_ctx = tracing_gen_ctx_dec();
721: fbuffer->trace_file = trace_file;
722:
723: fbuffer->event =
724: trace_event_buffer_lock_reserve(&fbuffer->buffer, trace_file,
725: event_call->event.type, len,
726: fbuffer->trace_ctx);
727: if (!fbuffer->event)
728: return NULL;
729:
730: fbuffer->regs = NULL;
731: fbuffer->entry = ring_buffer_event_data(fbuffer->event);
732: return fbuffer->entry;
733: }
734: EXPORT_SYMBOL_GPL(trace_event_buffer_reserve);
735:
736: int trace_event_reg(struct trace_event_call *call,
737: enum trace_reg type, void *data)
738: {
739: struct trace_event_file *file = data;
740:
741: WARN_ON(!(call->flags & TRACE_EVENT_FL_TRACEPOINT));
742: switch (type) {
743: case TRACE_REG_REGISTER:
744: return tracepoint_probe_register(call->tp,
745: call->class->probe,
746: file);
747: case TRACE_REG_UNREGISTER:
748: tracepoint_probe_unregister(call->tp,
749: call->class->probe,
]
|
| 41/2 |
2026/11/18 07:27 |
llm |
expert |
0m
Model:
Tokens:
input: 34290
output: 39
thoughts: 53
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing the Trace Context Flow**
Right, so `trace_ctx` is being squirreled away into the `entry` structure via the `ring_buffer_event_data` path, specifically when calling `trace_buffer_lock_reserve`. My immediate question, of course, is what happens to that `trace_ctx` within the scope of `trace_buffer_lock_reserve`. It's crucial to understand how this context is managed. Is it simply being copied? Is it being modified in any way? What's its lifetime within this reservation process? Is there an opportunity for race conditions if other threads are also reserving buffer space? I need to drill down into the internals of `trace_buffer_lock_reserve` to see how it handles this `trace_ctx` because that's where any potential issues or inefficiencies are most likely to reside. Understanding the memory model surrounding `trace_ctx`'s lifecycle here is absolutely key to understanding the overall trace implementation.
|
| 42/2 |
2026/11/18 07:28 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/trace/trace.c Name:__trace_buffer_lock_reserve]
Results: map[SourceCode:1666: static __always_inline struct ring_buffer_event *
1667: __trace_buffer_lock_reserve(struct trace_buffer *buffer,
1668: int type,
1669: unsigned long len,
1670: unsigned int trace_ctx)
1671: {
1672: struct ring_buffer_event *event;
1673:
1674: event = ring_buffer_lock_reserve(buffer, len);
1675: if (event != NULL)
1676: trace_event_setup(event, type, trace_ctx);
1677:
1678: return event;
1679: }
SourceFile:kernel/trace/trace.h]
|
| 43/2 |
2026/11/18 07:28 |
llm |
expert |
0m
Model:
Tokens:
input: 34825
output: 36
thoughts: 8
Thoughts: Okay, here's my interpretation of that.
**Analyzing the `trace_event_setup` Function**
Right, so I'm looking at this `trace_event_setup` function, and my initial thought is: what's its purpose within the larger tracing framework? This name immediately suggests that it's setting up some crucial aspect of event tracing, but the specifics are going to be key. I'll need to drill down into the function's implementation to see precisely *what* it's setting up. Is it initializing data structures, registering callbacks, configuring buffers, enabling specific event types, or a combination of these? Without that context, this is like staring at a promising title without the story.
My expert mind immediately goes to the potential for race conditions or synchronization issues during setup. Is this function thread-safe? Does it handle concurrent access correctly? Does it need any locks? And what is the performance impact of this? Is it optimized to do the best job it can? These are all typical concerns with any critical initialization routine, and tracing is a highly performance-sensitive area. I'll need to look at how it interacts with other parts of the tracing system to assess that.
I should also consider the broader implications. Is this function a central point of configuration for the entire system, or does it apply to some events in particular? If it's a general initialization, I'll want to think about error handling: how does it deal with failures? What kinds of errors can occur, and how are they signaled or handled? Does it have the flexibility to be re-run or reconfigured?
Ultimately, my goal here is to establish a solid mental model of how `trace_event_setup` works and where it fits into the overall scheme of things. That's the only way I can use this knowledge effectively.
|
| 44/2 |
2026/11/18 07:28 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/trace/trace.h Name:trace_event_setup]
Results: map[SourceCode:1657: static __always_inline void
1658: trace_event_setup(struct ring_buffer_event *event,
1659: int type, unsigned int trace_ctx)
1660: {
1661: struct trace_entry *ent = ring_buffer_event_data(event);
1662:
1663: tracing_generic_entry_update(ent, type, trace_ctx);
1664: }
SourceFile:kernel/trace/trace.h]
|
| 45/2 |
2026/11/18 07:28 |
llm |
expert |
0m
Model:
Tokens:
input: 35404
output: 38
thoughts: 10
Thoughts: Okay, here's the summary, assuming I'm the expert and the "text" refers to my own thought process about debugging a piece of code, specifically around a function called `tracing_generic_entry_update`:
**Analyzing `tracing_generic_entry_update`**
Right, so I'm looking at this `tracing_generic_entry_update` function, and my immediate concern is how it interacts with the broader tracing framework. This is critical because performance here impacts EVERYTHING. I need to understand the entry points, how data flows in and out, and where bottlenecks might exist. My first thought is: are we using this function correctly within the tracing system? Are we logging too much, or not enough? Is the data we're capturing truly representative of what's happening, or are we introducing noise?
I need to dive deeper into the code to really understand the implications of calling this function. I have to look for possible contention points if multiple threads access this at the same time and also if these calls are being made inside of a critical section. My thoughts are focusing on the instrumentation. Where are the calls inserted, and what kind of context are we capturing? Is it relevant to the problem? Are there alternative ways to capture the information, or are we forced to log data here? Are there any obvious areas for optimization, such as using efficient data structures or reducing the overhead of logging?
The main point is making sure that we're adding this logging efficiently so that it does not slow down the actual code performance. I will have to ensure that we are using the logging at the right granularity so that we can have performance and diagnostics.
So my immediate action plan is to trace the function's execution, analyze the logging output, and compare it to the overall performance profile of the system. I also need to make sure that the instrumentation is still relevant.
|
| 46/2 |
2026/11/18 07:28 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/trace/trace.h Name:tracing_generic_entry_update]
Results: map[SourceCode: 177: static inline void tracing_generic_entry_update(struct trace_entry *entry,
178: unsigned short type,
179: unsigned int trace_ctx)
180: {
181: entry->preempt_count = trace_ctx & 0xff;
182: entry->pid = current->pid;
183: entry->type = type;
184: entry->flags = trace_ctx >> 16;
185: }
SourceFile:include/linux/trace_events.h]
|
| 47/2 |
2026/11/18 07:28 |
llm |
expert |
0m
Model:
Tokens:
input: 36009
output: 15
thoughts: 609
Thoughts: **Analyzing a Benign Race Condition in Kernel Tracing**
Okay, so I'm looking at this code and I see `entry->preempt_count = trace_ctx & 0xff;` and how it's used in `trace_output.c`. It's clear that `preempt_count` is being populated for diagnostic information within trace entries. The key observation is that this field is read by an interrupt handler that's interrupting `__migrate_disable` on the *same* CPU and for the *same* task (the `current` task).
My understanding of the code tells me this is what's happening: `migration_disable_value()` is reading `current->migration_disabled`. This read is *purely* for diagnostics: formatting the trace entry's `preempt_count` field. The read happens when an interrupt, a timer interrupt calling an MSR write tracepoint in this specific case, interrupts the task while it's in the middle of executing `__migrate_disable()` and specifically `p->migration_disabled = 1;`.
Since `migration_disabled` is an aligned 16-bit integer (an unsigned short), hardware atomicity is guaranteed for single-instruction loads and stores. Therefore, the trace event will *simply* capture either the value before the update (0) or after (1). It represents the state of `current->migration_disabled` at the exact instant the tracepoint was recorded. Critically, neither value causes *any* invalid logic, control flow hazard, pointer dereference, or ordering problem. This value is only written to the ring buffer for informational trace output.
Considering the "BENIGN" race conditions definition in the code comments, this is absolutely **BENIGN**. The read is diagnostic-only; it's a "safe overwrite & plain scalar access" where either value is safe. It's a "non-critical update used only for /proc, /sys, counters, timestamps, or pr_info".
Given that, I'd recommend using `READ_ONCE(current->migration_disabled)` in `migration_disable_value()` just to be extra explicit, even though it's likely functionally equivalent. I'll make sure to note this in the next commit. Time to call `set-results`!
|
| 48/2 |
2026/11/18 07:28 |
tool |
set-results |
0m
Args:
Results: map[Benign:true FailureDetectableBy:]
|
| 49/2 |
2026/11/18 07:28 |
llm |
expert |
0m
Model:
Tokens:
input: 37141
output: 515
thoughts: 57
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Response Generation - Finalizing the Output**
Alright, the `set-results` call went through without a hitch. That's a good sign. Now, it's time to assemble the response, keeping the pre-defined format in mind. I need to make sure I cover all the bases: Race Summary, Synchronization context, the Final Classification, the Reasoning behind it all, and any Recommended Annotations. It's a structured approach, which is ideal for ensuring completeness and clarity. Let's make sure that I address each point. Now let's finalize the output.
|
| 50/1 |
2026/11/18 07:28 |
action |
format-explanation |
0m
Results: map[Explanation:### Race Summary
- **Racing functions:** `migration_disable_value()` (via
`tracing_gen_ctx_irq_test()`) vs `__migrate_disable()` (via `migrate_disable()`)
- **Variable/Field:** `current->migration_disabled` (`unsigned short`, 2 bytes)
---
### Synchronization Context
`__migrate_disable()` disables preemption (`guard(preempt)()`) and
increments/sets `current->migration_disabled = 1;`. However, local interrupts
remain enabled during this operation. A hardware timer interrupt
(`sysvec_apic_timer_interrupt`) occurred on the same CPU, preempting the task
right at the memory write. During interrupt return processing (`irqentry_exit`),
an MSR write tracepoint triggered `trace_event_buffer_reserve()`, which invokes
`tracing_gen_ctx_irq_test()` -> `migration_disable_value()` to record execution
context flags. Consequently, the interrupt handler read
`current->migration_disabled` concurrently with the task's interrupted write to
the same field.
---
### Final Classification: BENIGN
---
### Reasoning
1. **Diagnostic / Tracing Only:** `migration_disable_value()` reads
`current->migration_disabled` exclusively to populate the upper 4 bits of
`trace_entry::preempt_count` in the ftrace ring buffer. This information is
purely diagnostic and only consumed when formatting trace logs (e.g. via
`trace_print_lat_fmt()`).
2. **Scalar Atomicity:** The field `migration_disabled` is an aligned 16-bit
(`unsigned short`) scalar. Reads and writes are atomic word accesses on x86 and
other supported architectures, preventing torn reads.
3. **Safe Values:** If the interrupt is handled immediately before or during the
write, the trace entry records `0`; if after, it records `1`. Either value
accurately reflects the state of the task around the transition, and neither
outcome affects kernel execution, control flow, or memory safety.
---
### Recommended Annotations
Wrap the diagnostic read in `READ_ONCE()` (or `data_race()`):
```c
static unsigned short migration_disable_value(void)
{
#if defined(CONFIG_SMP)
return READ_ONCE(current->migration_disabled);
#else
return 0;
#endif
}
```]
|