| 0/0 |
2026/11/18 23:31 |
flow |
assessment-kcsan |
1h04m
Results: map[Benign:true Explanation:### Race Summary
- **Racing Functions:** Low-level kernel context / scheduler read (reported as
`0x0`) vs `capable_wrt_inode_uidgid()` (`ns_capable_common()`) on
`current->flags`.
- **Variable/Field:** `current->flags` (specifically the `PF_SUPERPRIV` bit in
`task_struct::flags`).
---
### Synchronization Context
`current->flags` contains per-task state flags (`PF_*`). By kernel design,
`current->flags` is strictly single-writer: each task only modifies its own
`current->flags` in task context without explicit lock protection. When
`CONFIG_KCSAN_INTERRUPT_WATCHER=y` is enabled, KCSAN leaves interrupts enabled
during its watchpoint delay loop (`delay_access()`). An interrupt or subsequent
kernel preemption on the same CPU allows the scheduler or an interrupt handler
to read `current->flags` (e.g., checking `PF_KTHREAD` or `PF_WQ_WORKER`) while
the task is paused during a compound RMW (`current->flags |= PF_SUPERPRIV`).
Low-level entry/exit or scheduler frames skipped by the unwinder result in the
0-entry stack trace and `0x0` symbol.
---
### Final Classification: BENIGN
#### Reasoning
1. **Single-Writer Safety:** Only the task itself (`current`) writes to
`current->flags`. No other CPU, task, or interrupt handler mutates this field
concurrently, eliminating any hazard of lost updates or clobbered bits.
2. **Purely Accounting Flag:** `PF_SUPERPRIV` ("used superuser privileges") is
purely an accounting indicator used for BSD process accounting (`kernel/acct.c`)
and taskstats (`kernel/tsacct.c`) when recording process exit statistics
(`ac_flag |= ASU`). It is never checked for security or capability authorization
decisions.
3. **Single-Copy Atomicity & Bit Independence:** `task_struct::flags` is an
aligned 32-bit unsigned integer. On all supported architectures, 32-bit aligned
reads and writes are single-copy atomic. Any concurrent reader checks
independent bits (e.g., `flags & PF_...`) and will safely observe either the old
value or the new value with `PF_SUPERPRIV` set without word tearing.
#### Recommended Annotations
If silence from KCSAN is desired, the update can be marked with `data_race()`:
```c
data_race(current->flags |= PF_SUPERPRIV);
``` FailureDetectableBy:]
|
| 1/1 |
2026/11/18 23:31 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/6d0c4d912ac4c28457116fbfe153047fb3052961/data]
|
| 2/1 |
2026/11/18 23:31 |
action |
kernel-builder |
0m
Results: map[KernelObj:/app/workdir/cache/build/4fc9cb093f0faa8b5951a9949e7cc5ff4ce76564/data]
|
| 3/1 |
2026/11/18 23:31 |
action |
codesearch-prepare |
0m
Results: map[Index:codesearch-index]
|
| 4/1 |
2026/11/18 23:31 |
agent |
expert |
1h04m
Model:
Results: map[Benign:true FailureDetectableBy:]
Instruction: # KCSAN Data Race Severity Analysis Protocol
You are an expert Linux kernel concurrency engineer analyzing a Kernel
Concurrency Sanitizer (KCSAN) data race report to determine if it is
**BENIGN** or **HARMFUL**.
## 1. CLASSIFICATIONS
### **BENIGN (Truly Benign)**
The logic is sound and structurally tolerant to compiler optimizations or
stale reads (or benign tearing on diagnostics/stats).
- **Diagnostics/Stats:** Reads or non-critical updates used only for `/proc`,
`/sys`, counters, timestamps, or `pr_info`.
- **Heuristic Hints:** A "hint" flag or threshold where an old value only
causes a slightly delayed update or a sub-optimal but safe fast-path.
- **Single-Writer Flag Updates:** A single writer updating flags where the
concurrent read is a simple bitwise check (e.g., `flags & MASK`). These are
historically tolerated, assuming neither "Fused Accesses" nor "Ordering
Violations" are relevant in this context.
- **Marked Reloads & Lock Re-checks:** A load feeding into a `cmpxchg()` loop,
checked against a later `READ_ONCE()` reload, or re-verified under a lock
(assuming no "Ordering Violations" on the lockless fast-path).
- **Safe Overwrites & Plain Scalar Accesses:** Writing the same value already
present, or aligned word-sized scalar accesses (e.g., `read (marked)` vs
plain `write`) where observing either the old or new value is safe.
### **HARMFUL (Logic Bug or Marking Required)**
The race causes incorrect behavior due to a synchronization failure or
because missing annotations allow the compiler or CPU to break the algorithm.
**Marking Required for Correctness:**
Do **not** classify a race as HARMFUL merely because an access lacks
`READ_ONCE()`/`WRITE_ONCE()`; you must prove one of these concrete hazards:
- **Fused Accesses:** The compiler hoists a plain load out of a tight
barrier-free spin loop causing a livelock (note: non-inlined calls,
`schedule()`, and locks act as compiler barriers), or reloads a pointer/index
between check and use (TOCTOU).
- **Torn Accesses:** An access larger than word size (e.g., 64-bit on 32-bit
arch, or multi-word structs; aligned `<= sizeof(long)` scalars and pointers
do not tear) is split into multiple non-atomic accesses. Note that
`READ_ONCE()` does **not** guarantee atomicity for 64-bit variables on 32-bit
architectures.
- **Ordering Violations:** The race breaks a required "happens-before"
relationship between dependent memory accesses (requires primitives with
implied or explicit memory barriers).
**Logic Bugs:**
A fundamental synchronization failure. Marking accesses will **not** fix it;
the logic itself must change.
- **Pointers/Lifecycle:** The racing variable is a pointer being dereferenced
or a refcount governing object lifecycle (Use-After-Free risk).
- **Control Flow:** The variable guards a critical section, memory allocation,
or hardware command.
- **Bitfields:** Concurrent writes to different bits in the same word.
Compilers often use non-atomic read-modify-write sequences, meaning a
write to `bit_A` can "clobber" a concurrent write to `bit_B`. However,
do not blindly assume all bitfield accesses are harmful; you must prove
that a concurrent write actually clobbers another in a way that breaks
logic.
- **Complex Structures:** Races on shared lists, trees, or hashmaps.
- **Lossy Updates:** Concurrent plain RMW operations (e.g., `var++`) on
non-diagnostic variables where every increment must be preserved.
- **State Machines:** Races allowing a state machine to bypass transitions
or enter an invalid state.
- **Adjacent Unsynchronized Operations:** Consider races happening at the
same time. For example, if both threads execute `struct->has_elements = true;
list_add(node, &struct->list);`, the race on `has_elements` implies an
adjacent race on `list_head`, which is HARMFUL.
## 2. RESEARCH & ANALYSIS WORKFLOW
1. **Locate the Race:** Find the exact variables and functions in the stack
traces. Do not speculate about hypothetical compiler
behaviors or theoretical dangers (e.g., dismissing something as
"fundamentally unsafe") without tracing the actual data flow to a crash.
2. **Contextualize:** Identify held locks, RCU sections, or interrupt
contexts. Explain why the race is possible (e.g., "Thread A holds `lock`,
but Thread B is a lockless reader").
3. **Data Flow:** Follow the racing variable into its subsequent uses. If
the reader sees a stale or torn value, what branch is taken? Does it lead
to a pointer dereference or `BUG_ON()`? **You must prove harm via this
data flow.**
4. **Failure Sequencing (if HARMFUL):** Construct a two-column execution trace
demonstrating the failure.
*Example format:*
```text
CPU0 CPU1
function_a()
// lockless read
ptr = global_ptr
<PREEMPT>
function_b()
lock(&my_lock)
global_ptr = NULL
unlock(&my_lock)
kfree(ptr)
if (ptr)
*ptr = 1; // -> Use-After-Free!
```
## 3. OUTPUT FORMAT
- **Race Summary:** `[Function A]` vs `[Function B]` on `[Variable/Field]`.
- **Synchronization context:** List held locks and explain the lack of mutual
exclusion.
- **Final Classification:** **BENIGN** or **HARMFUL**.
**If BENIGN:**
- **Reasoning:** Briefly explain why the race is structurally tolerant to stale
reads (or benign tearing on diagnostics/stats).
- **Recommended Annotations:** Suggest appropriate annotations (e.g.,
`READ_ONCE()`, `WRITE_ONCE()`, `data_race()`).
**If HARMFUL:**
- **Failure Reasoning:** Explain and provide a two-column interleaving showing
exactly how the race leads to a failure such as corruption or kernel crash.
- **FailureDetectableBy:** One of:
- `"kasan"`: memory safety bug (use-after-free, out-of-bounds, double-free).
- `"kmsan"`: uninitialized memory read/exposure (e.g. missing publish/subscribe ordering).
- `"any"`: kernel crash/hang (`BUG_ON`, `WARN_ON`, NULL deref, GPF, deadlock).
- `"user"`: user-visible ABI/semantic corruption detectable by userspace without a kernel crash.
- `"none"`: purely internal kernel state/accounting bug without crash or user-visible invariant violation.
- **Recommended Fix (ONLY if fix is trivial):** Suggest a structural fix (e.g.,
"Hold `mapping->i_pages` lock", "Convert to `atomic_t`") or required memory
ordering annotations (e.g., "Wrap in `READ_ONCE()`", "Use
`smp_load_acquire()`").
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The data race report is:
==================================================================
BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid
read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
read-write to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
ns_capable_common kernel/capability.c:343 [inline]
ns_capable kernel/capability.c:362 [inline]
capable_wrt_inode_uidgid+0xa2/0x190 kernel/capability.c:495
chgrp_ok fs/attr.c:132 [inline]
setattr_prepare+0x4bc/0x710 fs/attr.c:198
shmem_setattr+0x3b/0x7a0 mm/shmem.c:1562
notify_change+0x857/0x8d0 fs/attr.c:556
chown_common+0x2df/0x450 fs/open.c:825
do_fchownat+0x100/0x210 fs/open.c:853
__do_sys_chown fs/open.c:873 [inline]
__se_sys_chown fs/open.c:871 [inline]
__x64_sys_chown+0x47/0x60 fs/open.c:871
x64_sys_call+0x6d4/0x2550 arch/x86/include/generated/asm/syscalls_64.h:93
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x11e/0x3a0 arch/x86/entry/syscall_64.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 3283 Comm: udevd Not tainted syzkaller #0 PREEMPT(lazy)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/06/2026
==================================================================
Reply: ### Race Summary
- **Racing Functions:** Low-level kernel context / scheduler read (reported as `0x0`) vs `capable_wrt_inode_uidgid()` (`ns_capable_common()`) on `current->flags`.
- **Variable/Field:** `current->flags` (specifically the `PF_SUPERPRIV` bit in `task_struct::flags`).
---
### Synchronization Context
`current->flags` contains per-task state flags (`PF_*`). By kernel design, `current->flags` is strictly single-writer: each task only modifies its own `current->flags` in task context without explicit lock protection. When `CONFIG_KCSAN_INTERRUPT_WATCHER=y` is enabled, KCSAN leaves interrupts enabled during its watchpoint delay loop (`delay_access()`). An interrupt or subsequent kernel preemption on the same CPU allows the scheduler or an interrupt handler to read `current->flags` (e.g., checking `PF_KTHREAD` or `PF_WQ_WORKER`) while the task is paused during a compound RMW (`current->flags |= PF_SUPERPRIV`). Low-level entry/exit or scheduler frames skipped by the unwinder result in the 0-entry stack trace and `0x0` symbol.
---
### Final Classification: BENIGN
#### Reasoning
1. **Single-Writer Safety:** Only the task itself (`current`) writes to `current->flags`. No other CPU, task, or interrupt handler mutates this field concurrently, eliminating any hazard of lost updates or clobbered bits.
2. **Purely Accounting Flag:** `PF_SUPERPRIV` ("used superuser privileges") is purely an accounting indicator used for BSD process accounting (`kernel/acct.c`) and taskstats (`kernel/tsacct.c`) when recording process exit statistics (`ac_flag |= ASU`). It is never checked for security or capability authorization decisions.
3. **Single-Copy Atomicity & Bit Independence:** `task_struct::flags` is an aligned 32-bit unsigned integer. On all supported architectures, 32-bit aligned reads and writes are single-copy atomic. Any concurrent reader checks independent bits (e.g., `flags & PF_...`) and will safely observe either the old value or the new value with `PF_SUPERPRIV` set without word tearing.
#### Recommended Annotations
If silence from KCSAN is desired, the update can be marked with `data_race()`:
```c
data_race(current->flags |= PF_SUPERPRIV);
```
|
| 5/2 |
2026/11/18 23:31 |
llm |
expert |
0m
Model:
Tokens:
input: 6493
output: 33
thoughts: 684
Thoughts: **Analyzing the KCSAN Data Race Report**
Okay, let's dive into this KCSAN data race report. The core issue is flagged as a data race in `capable_wrt_inode_uidgid`. The report details a read to `0xffff888104b4116c` of 4 bytes by task 3283 on CPU 1. Hmm, the initial stack is missing. That's unusual; why is the stack trace empty or interrupted? I need to figure out what's going on with that first.
And then, there's a subsequent read-write to the *same* memory location, again by task 3283 on CPU 1. But wait, both accesses are from the *same* task and CPU? This is peculiar. This is unexpected.
The call stack gives us some more info, pointing to `ns_capable_common` and `capable_wrt_inode_uidgid`, specifically line 343 and 495 in `kernel/capability.c`. This needs investigation! I'll probably start by looking into `kernel/capability.c` in order to see what's happening. I need to understand this better. I'll probably use `read-file`, `grepper` or `codesearch-definition-source` to jump to those lines in that file and see what's going on.
|
| 6/2 |
2026/11/18 23:31 |
tool |
read-file |
0m
Args: map[File:kernel/capability.c FirstLine:330 LineCount:50]
Results: map[Contents: 330: static bool ns_capable_common(struct user_namespace *ns,
331: int cap,
332: unsigned int opts)
333: {
334: int capable;
335:
336: if (unlikely(!cap_valid(cap))) {
337: pr_crit("capable() called with invalid cap=%u\n", cap);
338: BUG();
339: }
340:
341: capable = security_capable(current_cred(), ns, cap, opts);
342: if (capable == 0) {
343: current->flags |= PF_SUPERPRIV;
344: return true;
345: }
346: return false;
347: }
348:
349: /**
350: * ns_capable - Determine if the current task has a superior capability in effect
351: * @ns: The usernamespace we want the capability in
352: * @cap: The capability to be tested for
353: *
354: * Return true if the current task has the given superior capability currently
355: * available for use, false if not.
356: *
357: * This sets PF_SUPERPRIV on the task if the capability is available on the
358: * assumption that it's about to be used.
359: */
360: bool ns_capable(struct user_namespace *ns, int cap)
361: {
362: return ns_capable_common(ns, cap, CAP_OPT_NONE);
363: }
364: EXPORT_SYMBOL(ns_capable);
365:
366: /**
367: * ns_capable_noaudit - Determine if the current task has a superior capability
368: * (unaudited) in effect
369: * @ns: The usernamespace we want the capability in
370: * @cap: The capability to be tested for
371: *
372: * Return true if the current task has the given superior capability currently
373: * available for use, false if not.
374: *
375: * This sets PF_SUPERPRIV on the task if the capability is available on the
376: * assumption that it's about to be used.
377: */
378: bool ns_capable_noaudit(struct user_namespace *ns, int cap)
379: {
]
|
| 7/2 |
2026/11/18 23:31 |
llm |
expert |
0m
Model:
Tokens:
input: 8232
output: 37
thoughts: 80
Thoughts: Okay, here's my thought process regarding that line of code, rendered as if it were my own internal monologue:
**Diving into the Kernel's Privileges**
Alright, line 343β¦ let's see. Ah, there it is: `current->flags |= PF_SUPERPRIV;` That's interesting, specifically the use of `current->flags`. I need to figure out what's going on with the `flags` field of `current`. I know `current` references the `task_struct`, of course, but a refresher on the flag's details is always welcome. Time to dig into the definition of `task_struct` and find the specific offset and meaning of the `flags` member. Let's fire up `codesearch-struct-layout` and get the canonical answer.
|
| 8/2 |
2026/11/18 23:31 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:kernel/capability.c FieldOffset:<nil> Name:task_struct]
Results: map[Fields:[map[Name:thread_info OffsetBits:0 SizeBits:192] map[Name:__state OffsetBits:192 SizeBits:32] map[Name:saved_state OffsetBits:224 SizeBits:32] map[Name:stack OffsetBits:256 SizeBits:64] map[Name:usage OffsetBits:320 SizeBits:32] map[Name:flags OffsetBits:352 SizeBits:32] map[Name:ptrace OffsetBits:384 SizeBits:32] map[Name:on_cpu OffsetBits:416 SizeBits:8] map[Name:on_rq OffsetBits:424 SizeBits:8] map[Name:is_blocked OffsetBits:432 SizeBits:8] map[Name:__pad OffsetBits:440 SizeBits:8] map[Name:wake_entry OffsetBits:448 SizeBits:128] map[Name:wakee_flips OffsetBits:576 SizeBits:32] map[Name:wakee_flip_decay_ts OffsetBits:640 SizeBits:64] map[Name:last_wakee OffsetBits:704 SizeBits:64] map[Name:recent_used_cpu OffsetBits:768 SizeBits:32] map[Name:wake_cpu OffsetBits:800 SizeBits:32] map[Name:iowait_cpu OffsetBits:832 SizeBits:32] map[Name:prio OffsetBits:864 SizeBits:32] map[Name:static_prio OffsetBits:896 SizeBits:32] map[Name:normal_prio OffsetBits:928 SizeBits:32] map[Name:rt_priority OffsetBits:960 SizeBits:32] map[Name:se OffsetBits:1024 SizeBits:2560] map[Name:rt OffsetBits:3584 SizeBits:384] map[Name:dl OffsetBits:3968 SizeBits:2176] map[Name:dl_server OffsetBits:6144 SizeBits:64] map[Name:sched_class OffsetBits:6208 SizeBits:64] map[Name:sched_task_group OffsetBits:6272 SizeBits:64] map[Name:stats OffsetBits:6656 SizeBits:2048] map[Name:btrace_seq OffsetBits:8704 SizeBits:32] map[Name:policy OffsetBits:8736 SizeBits:32] map[Name:max_allowed_capacity OffsetBits:8768 SizeBits:64] map[Name:nr_cpus_allowed OffsetBits:8832 SizeBits:32] map[Name:cpus_ptr OffsetBits:8896 SizeBits:64] map[Name:user_cpus_ptr OffsetBits:8960 SizeBits:64] map[Name:cpus_mask OffsetBits:9024 SizeBits:64] map[Name:migration_pending OffsetBits:9088 SizeBits:64] map[Name:migration_disabled OffsetBits:9152 SizeBits:16] map[Name:migration_flags OffsetBits:9168 SizeBits:16] map[Name:rcu_read_lock_nesting OffsetBits:9184 SizeBits:32] map[Name:rcu_read_unlock_special OffsetBits:9216 SizeBits:32] map[Name:rcu_node_entry OffsetBits:9280 SizeBits:128] map[Name:rcu_blocked_node OffsetBits:9408 SizeBits:64] map[Name:rcu_tasks_nvcsw OffsetBits:9472 SizeBits:64] map[Name:rcu_tasks_holdout OffsetBits:9536 SizeBits:8] map[Name:rcu_tasks_idx OffsetBits:9544 SizeBits:8] map[Name:rcu_tasks_idle_cpu OffsetBits:9568 SizeBits:32] map[Name:rcu_tasks_holdout_list OffsetBits:9600 SizeBits:128] map[Name:rcu_tasks_exit_cpu OffsetBits:9728 SizeBits:32] map[Name:rcu_tasks_exit_list OffsetBits:9792 SizeBits:128] map[Name:trc_reader_nesting OffsetBits:9920 SizeBits:32] map[Name:trc_reader_scp OffsetBits:9984 SizeBits:64] map[Name:sched_info OffsetBits:10048 SizeBits:512] map[Name:tasks OffsetBits:10560 SizeBits:128] map[Name:pushable_tasks OffsetBits:10688 SizeBits:320] map[Name:pushable_dl_tasks OffsetBits:11008 SizeBits:192] map[Name:mm OffsetBits:11200 SizeBits:64] map[Name:active_mm OffsetBits:11264 SizeBits:64] map[Name:exec_state OffsetBits:11328 SizeBits:64] map[Name:exit_state OffsetBits:11392 SizeBits:32] map[Name:exit_code OffsetBits:11424 SizeBits:32] map[Name:exit_signal OffsetBits:11456 SizeBits:32] map[Name:pdeath_signal OffsetBits:11488 SizeBits:32] map[Name:jobctl OffsetBits:11520 SizeBits:64] map[Name:personality OffsetBits:11584 SizeBits:32] map[Name:sched_reset_on_fork OffsetBits:11616 SizeBits:1] map[Name:sched_contributes_to_load OffsetBits:11617 SizeBits:1] map[Name:sched_migrated OffsetBits:11618 SizeBits:1] map[Name:sched_task_hot OffsetBits:11619 SizeBits:1] map[Name: OffsetBits:11648 SizeBits:0] map[Name:sched_remote_wakeup OffsetBits:11648 SizeBits:1] map[Name:sched_rt_mutex OffsetBits:11649 SizeBits:1] map[Name:in_execve OffsetBits:11650 SizeBits:1] map[Name:in_iowait OffsetBits:11651 SizeBits:1] map[Name:restore_sigmask OffsetBits:11652 SizeBits:1] map[Name:in_user_fault OffsetBits:11653 SizeBits:1] map[Name:in_lru_fault OffsetBits:11654 SizeBits:1] map[Name:no_cgroup_migration OffsetBits:11655 SizeBits:1] map[Name:frozen OffsetBits:11656 SizeBits:1] map[Name:use_memdelay OffsetBits:11657 SizeBits:1] map[Name:in_eventfd OffsetBits:11658 SizeBits:1] map[Name:pasid_activated OffsetBits:11659 SizeBits:1] map[Name:reported_split_lock OffsetBits:11660 SizeBits:1] map[Name:in_thrashing OffsetBits:11661 SizeBits:1] map[Name:in_nf_duplicate OffsetBits:11662 SizeBits:1] map[Name:atomic_flags OffsetBits:11712 SizeBits:64] map[Name:restart_block OffsetBits:11776 SizeBits:448] map[Name:pid OffsetBits:12224 SizeBits:32] map[Name:tgid OffsetBits:12256 SizeBits:32] map[Name:stack_canary OffsetBits:12288 SizeBits:64] map[Name:real_parent OffsetBits:12352 SizeBits:64] map[Name:parent OffsetBits:12416 SizeBits:64] map[Name:children OffsetBits:12480 SizeBits:128] map[Name:sibling OffsetBits:12608 SizeBits:128] map[Name:group_leader OffsetBits:12736 SizeBits:64] map[Name:ptraced OffsetBits:12800 SizeBits:128] map[Name:ptrace_entry OffsetBits:12928 SizeBits:128] map[Name:thread_pid OffsetBits:13056 SizeBits:64] map[Name:pid_links OffsetBits:13120 SizeBits:512] map[Name:thread_node OffsetBits:13632 SizeBits:128] map[Name:vfork_done OffsetBits:13760 SizeBits:64] map[Name:set_child_tid OffsetBits:13824 SizeBits:64] map[Name:clear_child_tid OffsetBits:13888 SizeBits:64] map[Name:worker_private OffsetBits:13952 SizeBits:64] map[Name:utime OffsetBits:14016 SizeBits:64] map[Name:stime OffsetBits:14080 SizeBits:64] map[Name:gtime OffsetBits:14144 SizeBits:64] map[Name:prev_cputime OffsetBits:14208 SizeBits:192] map[Name:nvcsw OffsetBits:14400 SizeBits:64] map[Name:nivcsw OffsetBits:14464 SizeBits:64] map[Name:start_time OffsetBits:14528 SizeBits:64] map[Name:start_boottime OffsetBits:14592 SizeBits:64] map[Name:min_flt OffsetBits:14656 SizeBits:64] map[Name:maj_flt OffsetBits:14720 SizeBits:64] map[Name:posix_cputimers OffsetBits:14784 SizeBits:640] map[Name:posix_cputimers_work OffsetBits:15424 SizeBits:384] map[Name:ptracer_cred OffsetBits:15808 SizeBits:64] map[Name:real_cred OffsetBits:15872 SizeBits:64] map[Name:cred OffsetBits:15936 SizeBits:64] map[Name:cached_requested_key OffsetBits:16000 SizeBits:64] map[Name:comm OffsetBits:16064 SizeBits:128] map[Name:nameidata OffsetBits:16192 SizeBits:64] map[Name:sysvsem OffsetBits:16256 SizeBits:64] map[Name:sysvshm OffsetBits:16320 SizeBits:128] map[Name:real_fs OffsetBits:16448 SizeBits:64] map[Name:fs OffsetBits:16512 SizeBits:64] map[Name:files OffsetBits:16576 SizeBits:64] map[Name:io_uring OffsetBits:16640 SizeBits:64] map[Name:io_uring_restrict OffsetBits:16704 SizeBits:64] map[Name:nsproxy OffsetBits:16768 SizeBits:64] map[Name:signal OffsetBits:16832 SizeBits:64] map[Name:sighand OffsetBits:16896 SizeBits:64] map[Name:blocked OffsetBits:16960 SizeBits:64] map[Name:real_blocked OffsetBits:17024 SizeBits:64] map[Name:saved_sigmask OffsetBits:17088 SizeBits:64] map[Name:pending OffsetBits:17152 SizeBits:192] map[Name:sas_ss_sp OffsetBits:17344 SizeBits:64] map[Name:sas_ss_size OffsetBits:17408 SizeBits:64] map[Name:sas_ss_flags OffsetBits:17472 SizeBits:32] map[Name:task_works OffsetBits:17536 SizeBits:64] map[Name:audit_context OffsetBits:17600 SizeBits:64] map[Name:loginuid OffsetBits:17664 SizeBits:32] map[Name:sessionid OffsetBits:17696 SizeBits:32] map[Name:seccomp OffsetBits:17728 SizeBits:128] map[Name:syscall_dispatch OffsetBits:17856 SizeBits:256] map[Name:parent_exec_id OffsetBits:18112 SizeBits:64] map[Name:self_exec_id OffsetBits:18176 SizeBits:64] map[Name:alloc_lock OffsetBits:18240 SizeBits:32] map[Name:pi_lock OffsetBits:18272 SizeBits:32] map[Name:wake_q OffsetBits:18304 SizeBits:64] map[Name:pi_waiters OffsetBits:18368 SizeBits:128] map[Name:pi_top_task OffsetBits:18496 SizeBits:64] map[Name:pi_blocked_on OffsetBits:18560 SizeBits:64] map[Name:blocked_on OffsetBits:18624 SizeBits:64] map[Name:blocked_lock OffsetBits:18688 SizeBits:32] map[Name:blocked_donor OffsetBits:18752 SizeBits:64] map[Name:journal_info OffsetBits:18816 SizeBits:64] map[Name:bio_list OffsetBits:18880 SizeBits:64] map[Name:plug OffsetBits:18944 SizeBits:64] map[Name:reclaim_state OffsetBits:19008 SizeBits:64] map[Name:io_context OffsetBits:19072 SizeBits:64] map[Name:capture_control OffsetBits:19136 SizeBits:64] map[Name:ptrace_message OffsetBits:19200 SizeBits:64] map[Name:last_siginfo OffsetBits:19264 SizeBits:64] map[Name:ioac OffsetBits:19328 SizeBits:448] map[Name:acct_rss_mem1 OffsetBits:19776 SizeBits:64] map[Name:acct_vm_mem1 OffsetBits:19840 SizeBits:64] map[Name:acct_timexpd OffsetBits:19904 SizeBits:64] map[Name:mems_allowed OffsetBits:19968 SizeBits:64] map[Name:mems_allowed_seq OffsetBits:20032 SizeBits:32] map[Name:cpuset_mem_spread_rotor OffsetBits:20064 SizeBits:32] map[Name:cgroups OffsetBits:20096 SizeBits:64] map[Name:cg_list OffsetBits:20160 SizeBits:128] map[Name:futex OffsetBits:20288 SizeBits:576] map[Name:perf_recursion OffsetBits:20864 SizeBits:32] map[Name:perf_event_ctxp OffsetBits:20928 SizeBits:64] map[Name:perf_event_mutex OffsetBits:20992 SizeBits:192] map[Name:perf_event_list OffsetBits:21184 SizeBits:128] map[Name:perf_ctx_data OffsetBits:21312 SizeBits:64] map[Name:ipi_mask OffsetBits:21376 SizeBits:64] map[Name:mempolicy OffsetBits:21440 SizeBits:64] map[Name:il_prev OffsetBits:21504 SizeBits:16] map[Name:il_weight OffsetBits:21520 SizeBits:8] map[Name:pref_node_fork OffsetBits:21536 SizeBits:16] map[Name:cache_work OffsetBits:21568 SizeBits:128] map[Name:sched_cache_grp OffsetBits:21696 SizeBits:64] map[Name:preferred_llc OffsetBits:21760 SizeBits:32] map[Name:pref_llc_queued OffsetBits:21792 SizeBits:32] map[Name:rseq OffsetBits:21824 SizeBits:320] map[Name:mm_cid OffsetBits:22144 SizeBits:192] map[Name:tlb_ubc OffsetBits:22336 SizeBits:192] map[Name:splice_pipe OffsetBits:22528 SizeBits:64] map[Name:task_frag OffsetBits:22592 SizeBits:128] map[Name:delays OffsetBits:22720 SizeBits:64] map[Name:make_it_fail OffsetBits:22784 SizeBits:32] map[Name:fail_nth OffsetBits:22816 SizeBits:32] map[Name:nr_dirtied OffsetBits:22848 SizeBits:32] map[Name:nr_dirtied_pause OffsetBits:22880 SizeBits:32] map[Name:dirty_paused_when OffsetBits:22912 SizeBits:64] map[Name:timer_slack_ns OffsetBits:22976 SizeBits:64] map[Name:default_timer_slack_ns OffsetBits:23040 SizeBits:64] map[Name:kcsan_ctx OffsetBits:23104 SizeBits:384] map[Name:trace_recursion OffsetBits:23488 SizeBits:64] map[Name:kcov_mode OffsetBits:23552 SizeBits:32] map[Name:kcov_size OffsetBits:23584 SizeBits:32] map[Name:kcov_area OffsetBits:23616 SizeBits:64] map[Name:kcov OffsetBits:23680 SizeBits:64] map[Name:kcov_remote OffsetBits:23744 SizeBits:64] map[Name:kcov_handle OffsetBits:23808 SizeBits:64] map[Name:kcov_sequence OffsetBits:23872 SizeBits:32] map[Name:kcov_softirq OffsetBits:23904 SizeBits:32] map[Name:kcov_saved_mode OffsetBits:23936 SizeBits:32] map[Name:kcov_saved_size OffsetBits:23968 SizeBits:32] map[Name:kcov_saved_area OffsetBits:24000 SizeBits:64] map[Name:kcov_saved_kcov OffsetBits:24064 SizeBits:64] map[Name:kcov_saved_sequence OffsetBits:24128 SizeBits:32] map[Name:memcg_in_oom OffsetBits:24192 SizeBits:64] map[Name:memcg_nr_pages_over_high OffsetBits:24256 SizeBits:32] map[Name:active_memcg OffsetBits:24320 SizeBits:64] map[Name:objcg OffsetBits:24384 SizeBits:64] map[Name:throttle_disk OffsetBits:24448 SizeBits:64] map[Name:utask OffsetBits:24512 SizeBits:64] map[Name:kmap_ctrl OffsetBits:24576 SizeBits:0] map[Name:rcu OffsetBits:24576 SizeBits:128] map[Name:rcu_users OffsetBits:24704 SizeBits:32] map[Name:pagefault_disabled OffsetBits:24736 SizeBits:32] map[Name:oom_reaper_list OffsetBits:24768 SizeBits:64] map[Name:oom_reaper_timer OffsetBits:24832 SizeBits:320] map[Name:stack_vm_area OffsetBits:25152 SizeBits:64] map[Name:stack_refcount OffsetBits:25216 SizeBits:32] map[Name:security OffsetBits:25280 SizeBits:64] map[Name:bpf_storage OffsetBits:25344 SizeBits:64] map[Name:bpf_ctx OffsetBits:25408 SizeBits:64] map[Name:bpf_net_context OffsetBits:25472 SizeBits:64] map[Name:mce_vaddr OffsetBits:25536 SizeBits:64] map[Name:mce_kflags OffsetBits:25600 SizeBits:64] map[Name:mce_addr OffsetBits:25664 SizeBits:64] map[Name:mce_ripv OffsetBits:25728 SizeBits:1] map[Name:mce_whole_page OffsetBits:25729 SizeBits:1] map[Name:__mce_reserved OffsetBits:25730 SizeBits:62] map[Name:mce_kill_me OffsetBits:25792 SizeBits:128] map[Name:mce_count OffsetBits:25920 SizeBits:32] map[Name:l1d_flush_kill OffsetBits:25984 SizeBits:128] map[Name:unwind_info OffsetBits:26112 SizeBits:320] map[Name:thread OffsetBits:26432 SizeBits:1216]]]
|
| 9/2 |
2026/11/18 23:31 |
llm |
expert |
0m
Model:
Tokens:
input: 14324
output: 38
thoughts: 205
Thoughts: Here's my thought process, as it unfolds:
**Digging into that `flags` Offset**
Okay, so `flags` is at offset 352 bits, which is 44 bytes, or 0x2c in hex. But hold on, let me double-check something. That address, `0xffff888104b4116c`β¦ that ends in `...16c`. Hmm, I wonder what's even at that offset `0x16c`? What struct are we even looking at with this address `0xffff888104b41...`? Aha! Let's think about this. If the base address is `0xffff888104b41000`, then an offset of `0x16c` from that base would indeed be adding 364 bytes.
Now, wait a minute, I should probably check that `capable_wrt_inode_uidgid+0xa2/0x190`! That's a good place to start. I should probably remind myself what that function is doing. Let me dig into its implementation.
|
| 10/2 |
2026/11/18 23:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/capability.c Name:capable_wrt_inode_uidgid]
Results: map[SourceCode: 480: /**
481: * capable_wrt_inode_uidgid - Check nsown_capable and uid and gid mapped
482: * @idmap: idmap of the mount @inode was found from
483: * @inode: The inode in question
484: * @cap: The capability in question
485: *
486: * Return true if the current task has the given capability targeted at
487: * its own user namespace and that the given inode's uid and gid are
488: * mapped into the current user namespace.
489: */
490: bool capable_wrt_inode_uidgid(const struct mnt_idmap *idmap,
491: const struct inode *inode, int cap)
492: {
493: struct user_namespace *ns = current_user_ns();
494:
495: return ns_capable(ns, cap) &&
496: privileged_wrt_inode_uidgid(ns, idmap, inode);
497: }
SourceFile:kernel/capability.c]
|
| 11/2 |
2026/11/18 23:31 |
llm |
expert |
0m
Model:
Tokens:
input: 15142
output: 30
thoughts: 955
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, let's break this down. I'm looking at a KCSAN data race report, and immediately, a few things jump out. The core issue seems to be a data race within `capable_wrt_inode_uidgid`. I'm focusing on lines 490-496, where this function is defined, and its dependency on `ns_capable` and `ns_capable_common`. The trace shows a read-write conflict on address `0xffff888104b4116c`.
The initial read part in the data-race report is suspicious: "read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1". The puzzling aspect is the lack of a stack trace for this read. That's unusual. KCSAN *should* provide one. Additionally, the report mentions "data-race in 0x0 / capable_wrt_inode_uidgid" which is something I'm very familiar with. KCSAN does not behave like this; it will typically provide a trace.
This points to a specific KCSAN behavior: when the race occurs on the same CPU and from the same task, it can indicate that the access happened because of a preempt, or interrupt, and the other thread in the data race could be related.
I see both accesses happening on "task 3283 on cpu 1". Could this be an interrupt handler or an NMI handler, or even an eBPF program, timer, or softirq? The CPU context shift within the same task is the key here.
My next step is to dig into KCSAN's documentation, and review similar issues and reports in the git log, or perhaps even a more thorough search for reports of data races with a "0x0" address or similar patterns. This might provide clues about specific conditions under which KCSAN omits the stack trace. This isn't a typical race.
|
| 12/2 |
2026/11/18 23:31 |
tool |
git-log |
10m
Error:
Args: map[CodeRegexp:current->flags \|= PF_SUPERPRIV Count:5]
Results:
|
| 13/2 |
2026/11/18 23:41 |
llm |
expert |
0m
Model:
Tokens:
input: 16604
output: 21
thoughts: 11
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Brainstorming Git Integration with PathPrefix**
Alright, I'm thinking about how to integrate `git-log` into the `PathPrefix` system. My initial thought is to make `git-log` a core component, especially given its capabilities in tracing history and providing detailed commit information. This seems like a natural fit, allowing for robust version control insights within the `PathPrefix` environment. I see a lot of potential here for features like detailed auditing of file changes, rollback capabilities, and perhaps even automated deployment strategies tied directly to specific commits.
|
| 14/2 |
2026/11/18 23:41 |
tool |
git-log |
0m
Args: map[PathPrefix:kernel/capability.c]
Results: map[Output:8e647e65a66b fs: port privilege checking helpers to const mnt_idmap
412f89fb3988 capability: unexport has_capability_noaudit
1b91724d0bdc capability: Add new capable_noaudit
4ae89b1fe7c2 capability: Remove unused has_capability
b6dcdb06c064 kernel: remove get_task_comm() and print task comm directly
6672efbb685f lsm: constify the 'target' parameter in security_capget()
a495108ea99c capability: fix kernel-doc warnings in capability.c
f122a08b197d capability: just use a 'u64' instead of a 'u32[2]' array
e67fe63341b8 fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
9452e93e6dae fs: port privilege checking helpers to mnt_idmap
]
|
| 15/2 |
2026/11/18 23:41 |
llm |
expert |
0m
Model:
Tokens:
input: 17050
output: 35
thoughts: 588
Thoughts: **Dissecting a Kernel Memory Access**
Okay, hold on a second. What's this address, `0xffff888104b4116c`? I need to figure out what object this is referencing. And where did this access come from? I see it's related to `kernel/capability.c:343`, specifically, the line `current->flags |= PF_SUPERPRIV;`.
Alright, let's break this down. Is `current->flags` a 4-byte integer? Yes, the `task_struct` structure definition confirms it: the "flags" field is 32 bits. Wait, the offset is listed as 352 bits. That means 44 bytes, or 0x2c in hex. So why is the address ending in `...16c`? That doesn't align with `flags` offset in the `task_struct`.
Hang on, did I make an assumption? I assumed `thread_info` is at offset 0. Is that correct on x86_64? I need to double-check the `task_struct` layout. Let me consult the `codesearch-struct-layout` data. It confirms that `thread_info` is indeed at offset 0, and is 24 bytes in size on x86_64. But! The layout of `task_struct` can be changed by a kernel configuration. KCSAN or DEBUG_PREEMPT, could change the layout and introduce an offset.
Could `0xffff888104b4116c` be pointing to something other than `current->flags`? Maybe. Let's revisit the code snippet at `kernel/capability.c:343` to be absolutely certain.
Alright, looking at the surrounding lines, from 341-346, the code block is clear. Line 343 is indeed the line of interest: `current->flags |= PF_SUPERPRIV;`. This reads the value of `current->flags` (which, as we established, is a 4-byte unsigned int), performs a bitwise OR with `PF_SUPERPRIV` (which I know is 0x00000100), and then writes the result back to `current->flags`. So, it's a 4-byte read-write operation.
But that still doesn't explain why the offset from the base is `...16c`. Maybe I need to look at the complete definition of `struct task_struct` in `include/linux/sched.h` to fully understand the layout and any possible offsets introduced by other structure members, or padding. This looks like something I need to go through manually.
|
| 16/2 |
2026/11/18 23:42 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:740 LineCount:50]
Results: map[Contents: 740: *
741: * @rq the runqueue this server is for
742: */
743: struct rq *rq;
744: dl_server_pick_f server_pick_task;
745:
746: #ifdef CONFIG_RT_MUTEXES
747: /*
748: * Priority Inheritance. When a DEADLINE scheduling entity is boosted
749: * pi_se points to the donor, otherwise points to the dl_se it belongs
750: * to (the original one/itself).
751: */
752: struct sched_dl_entity *pi_se;
753: #endif
754: };
755:
756: #ifdef CONFIG_UCLAMP_TASK
757: /* Number of utilization clamp buckets (shorter alias) */
758: #define UCLAMP_BUCKETS CONFIG_UCLAMP_BUCKETS_COUNT
759:
760: /*
761: * Utilization clamp for a scheduling entity
762: * @value: clamp value "assigned" to a se
763: * @bucket_id: bucket index corresponding to the "assigned" value
764: * @active: the se is currently refcounted in a rq's bucket
765: * @user_defined: the requested clamp value comes from user-space
766: *
767: * The bucket_id is the index of the clamp bucket matching the clamp value
768: * which is pre-computed and stored to avoid expensive integer divisions from
769: * the fast path.
770: *
771: * The active bit is set whenever a task has got an "effective" value assigned,
772: * which can be different from the clamp value "requested" from user-space.
773: * This allows to know a task is refcounted in the rq's bucket corresponding
774: * to the "effective" bucket_id.
775: *
776: * The user_defined bit is set whenever a task has got a task-specific clamp
777: * value requested from userspace, i.e. the system defaults apply to this task
778: * just as a restriction. This allows to relax default clamps when a less
779: * restrictive task-specific value has been requested, thus allowing to
780: * implement a "nice" semantic. For example, a task running with a 20%
781: * default boost can still drop its own boosting to 0%.
782: */
783: struct uclamp_se {
784: unsigned int value : bits_per(SCHED_CAPACITY_SCALE);
785: unsigned int bucket_id : bits_per(UCLAMP_BUCKETS);
786: unsigned int active : 1;
787: unsigned int user_defined : 1;
788: };
789: #endif /* CONFIG_UCLAMP_TASK */
]
|
| 17/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 19101
output: 33
thoughts: 22
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into the Kernel Scheduler Structures**
Okay, so I need to refresh my memory on the layout of the `task_struct`. Time to head straight to the source, `include/linux/sched.h`. I want to quickly pinpoint the starting point of the `struct task_struct` definition to get a handle on its core components.
|
| 18/2 |
2026/11/18 23:42 |
tool |
grepper |
0m
Args: map[Expression:struct task_struct \{ PathPrefixes:[include/linux/sched.h]]
Results: map[Output:include/linux/sched.h=833=struct task_ipi_mask { };
--
include/linux/sched.h-835-
include/linux/sched.h:836:struct task_struct {
include/linux/sched.h-837-#ifdef CONFIG_THREAD_INFO_IN_TASK
]
|
| 19/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 19336
output: 35
thoughts: 20
Thoughts: Okay, let's dive into this. I'm going to focus in on line 836 of `include/linux/sched.h`. Given my expertise, I already have a good grasp of the surrounding context within the scheduler's header file. I anticipate this line will be defining a key structure, macro, or perhaps an inline function crucial to task management and process scheduling within the Linux kernel. I'm mentally parsing the file structure, remembering the usual suspects around this line number β maybe something related to runqueues, task states, priority management, or context switching. I'll need to see the precise definition to understand its exact role and any nuances in its implementation. Let's get to it!
|
| 20/2 |
2026/11/18 23:42 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:836 LineCount:40]
Results: map[Contents: 836: struct task_struct {
837: #ifdef CONFIG_THREAD_INFO_IN_TASK
838: /*
839: * For reasons of header soup (see current_thread_info()), this
840: * must be the first element of task_struct.
841: */
842: struct thread_info thread_info;
843: #endif
844: unsigned int __state;
845:
846: /* saved state for "spinlock sleepers" */
847: unsigned int saved_state;
848:
849: /*
850: * This begins the randomizable portion of task_struct. Only
851: * scheduling-critical items should be added above here.
852: */
853: randomized_struct_fields_start
854:
855: void *stack;
856: refcount_t usage;
857: /* Per task flags (PF_*), defined further below: */
858: unsigned int flags;
859: unsigned int ptrace;
860:
861: #ifdef CONFIG_MEM_ALLOC_PROFILING
862: struct alloc_tag *alloc_tag;
863: #endif
864:
865: u8 on_cpu;
866: u8 on_rq;
867: u8 is_blocked;
868: u8 __pad;
869:
870: struct __call_single_node wake_entry;
871: unsigned int wakee_flips;
872: unsigned long wakee_flip_decay_ts;
873: struct task_struct *last_wakee;
874:
875: /*
]
|
| 21/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 20075
output: 29
thoughts: 389
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, let's break this down. Line numbers 853-858 triggered a thought - `randomized_struct_fields_start`! Right, the `task_struct` has randomized fields because of the `CONFIG_RANDSTRUCT` build option and the GCC plugin. That explains the seemingly odd offset for the `flags` field, specifically at `0x16c` in this instance. And, of course, `flags` is `unsigned int flags; /* Per task flags (PF_*), defined further below: */`. Makes sense.
Now, that KCSAN report... it's a data race in `capable_wrt_inode_uidgid`. Not ideal. The interesting part is the first access: a read to `0xffff888104b4116c` by task 3283 on CPU 1. Hold on... what's with the function being reported as `0x0` and the missing stack trace for that read access? That's unusual. KCSAN should give more context.
Time to dive into the KCSAN source. Let's start by grepping in `kernel/kcsan/` to see where a `0x0` address would be reported or why KCSAN might present that. There has to be a reason, and understanding that is critical to properly triage this data race. I need to understand why KCSAN is giving me this anomaly.
|
| 22/2 |
2026/11/18 23:42 |
tool |
grepper |
0m
Args: map[Expression:0x0 PathPrefixes:[kernel/kcsan]]
Results:
|
| 23/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 20828
output: 35
thoughts: 23
Thoughts: Okay, let's dive into this. Here's my thought process on examining how KCSAN reports data races:
**Deep Dive into KCSAN's Reporting Mechanism**
Right, so I want to get a solid grasp of how KCSAN actually handles reporting those nasty data races. I need to understand the details of the process. I should start by looking at `kernel/kcsan/report.c`. That's where I'd expect to find the core logic for generating those reports. I'm thinking about the structure of the output β the format, the information included, how it's presented to the user. Is it a standard kernel message? Does it use specific KCSAN-related log levels? What's the level of detail? I'm keen to see if it provides enough information for debugging, like stack traces, the relevant memory addresses, and the involved operations. I'm also curious about any potential optimizations or filtering that might be implemented to reduce noise. Does it aggregate similar races? Does it only report races that meet certain criteria (e.g., specific memory access patterns or critical sections)? This will inform my assessment of KCSAN's overall efficacy in helping diagnose these types of issues, which is a key part of my research.
|
| 24/2 |
2026/11/18 23:42 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:1 LineCount:80]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0
2: /*
3: * KCSAN reporting.
4: *
5: * Copyright (C) 2019, Google LLC.
6: */
7:
8: #include <linux/debug_locks.h>
9: #include <linux/delay.h>
10: #include <linux/jiffies.h>
11: #include <linux/kallsyms.h>
12: #include <linux/kernel.h>
13: #include <linux/lockdep.h>
14: #include <linux/preempt.h>
15: #include <linux/printk.h>
16: #include <linux/sched.h>
17: #include <linux/spinlock.h>
18: #include <linux/stacktrace.h>
19:
20: #include "kcsan.h"
21: #include "encoding.h"
22:
23: /*
24: * Max. number of stack entries to show in the report.
25: */
26: #define NUM_STACK_ENTRIES 64
27:
28: /* Common access info. */
29: struct access_info {
30: const volatile void *ptr;
31: size_t size;
32: int access_type;
33: int task_pid;
34: int cpu_id;
35: unsigned long ip;
36: };
37:
38: /*
39: * Other thread info: communicated from other racing thread to thread that set
40: * up the watchpoint, which then prints the complete report atomically.
41: */
42: struct other_info {
43: struct access_info ai;
44: unsigned long stack_entries[NUM_STACK_ENTRIES];
45: int num_stack_entries;
46:
47: /*
48: * Optionally pass @current. Typically we do not need to pass @current
49: * via @other_info since just @task_pid is sufficient. Passing @current
50: * has additional overhead.
51: *
52: * To safely pass @current, we must either use get_task_struct/
53: * put_task_struct, or stall the thread that populated @other_info.
54: *
55: * We cannot rely on get_task_struct/put_task_struct in case
56: * release_report() races with a task being released, and would have to
57: * free it in release_report(). This may result in deadlock if we want
58: * to use KCSAN on the allocators.
59: *
60: * Since we also want to reliably print held locks for
61: * CONFIG_KCSAN_VERBOSE, the current implementation stalls the thread
62: * that populated @other_info until it has been consumed.
63: */
64: struct task_struct *task;
65: };
66:
67: /*
68: * To never block any producers of struct other_info, we need as many elements
69: * as we have watchpoints (upper bound on concurrent races to report).
70: */
71: static struct other_info other_infos[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
72:
73: /*
74: * Information about reported races; used to rate limit reporting.
75: */
76: struct report_time {
77: /*
78: * The last time the race was reported.
79: */
80: unsigned long time;
]
|
| 25/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 22217
output: 36
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, rendered in the first person, as if I'm the one having these thoughts, targeting an expert audience:
**Diving into `kernel/kcsan/report.c`**
Alright, time to dig deeper. The investigation clearly points to `kernel/kcsan/report.c` as the next logical stop. I know this module intimately, but it's always good to refresh my memory, especially when troubleshooting. I'm focusing my attention there to see how the reports are constructed and if I can immediately identify any potential issues with the reporting logic, data formatting, or any race conditions within the reporting mechanism itself. I expect that a subtle bug there, could be causing the observed anomalous behavior. Maybe there's a problem with how the KCSan data is marshalled, or how it's sent upstream. I'll be looking for anything that might be introducing inconsistencies or corruption in the reported data, specifically related to the problematic scenarios the user is describing. I'll need to pay close attention to the lock interactions, memory barriers and any potentially shared data structures. This is where the magic happens, so let's see what's actually going on.
|
| 26/2 |
2026/11/18 23:42 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:81 LineCount:80]
Results: map[Contents: 81:
82: /*
83: * The frames of the 2 threads; if only 1 thread is known, one frame
84: * will be 0.
85: */
86: unsigned long frame1;
87: unsigned long frame2;
88: };
89:
90: /*
91: * Since we also want to be able to debug allocators with KCSAN, to avoid
92: * deadlock, report_times cannot be dynamically resized with krealloc in
93: * rate_limit_report.
94: *
95: * Therefore, we use a fixed-size array, which at most will occupy a page. This
96: * still adequately rate limits reports, assuming that a) number of unique data
97: * races is not excessive, and b) occurrence of unique races within the
98: * same time window is limited.
99: */
100: #define REPORT_TIMES_MAX (PAGE_SIZE / sizeof(struct report_time))
101: #define REPORT_TIMES_SIZE \
102: (CONFIG_KCSAN_REPORT_ONCE_IN_MS > REPORT_TIMES_MAX ? \
103: REPORT_TIMES_MAX : \
104: CONFIG_KCSAN_REPORT_ONCE_IN_MS)
105: static struct report_time report_times[REPORT_TIMES_SIZE];
106:
107: /*
108: * Spinlock serializing report generation, and access to @other_infos. Although
109: * it could make sense to have a finer-grained locking story for @other_infos,
110: * report generation needs to be serialized either way, so not much is gained.
111: */
112: static DEFINE_RAW_SPINLOCK(report_lock);
113:
114: /*
115: * Checks if the race identified by thread frames frame1 and frame2 has
116: * been reported since (now - KCSAN_REPORT_ONCE_IN_MS).
117: */
118: static bool rate_limit_report(unsigned long frame1, unsigned long frame2)
119: __must_hold(&report_lock)
120: {
121: struct report_time *use_entry = &report_times[0];
122: unsigned long invalid_before;
123: int i;
124:
125: BUILD_BUG_ON(CONFIG_KCSAN_REPORT_ONCE_IN_MS != 0 && REPORT_TIMES_SIZE == 0);
126:
127: if (CONFIG_KCSAN_REPORT_ONCE_IN_MS == 0)
128: return false;
129:
130: invalid_before = jiffies - msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS);
131:
132: /* Check if a matching race report exists. */
133: for (i = 0; i < REPORT_TIMES_SIZE; ++i) {
134: struct report_time *rt = &report_times[i];
135:
136: /*
137: * Must always select an entry for use to store info as we
138: * cannot resize report_times; at the end of the scan, use_entry
139: * will be the oldest entry, which ideally also happened before
140: * KCSAN_REPORT_ONCE_IN_MS ago.
141: */
142: if (time_before(rt->time, use_entry->time))
143: use_entry = rt;
144:
145: /*
146: * Initially, no need to check any further as this entry as well
147: * as following entries have never been used.
148: */
149: if (rt->time == 0)
150: break;
151:
152: /* Check if entry expired. */
153: if (time_before(rt->time, invalid_before))
154: continue; /* before KCSAN_REPORT_ONCE_IN_MS ago */
155:
156: /* Reported recently, check if race matches. */
157: if ((rt->frame1 == frame1 && rt->frame2 == frame2) ||
158: (rt->frame1 == frame2 && rt->frame2 == frame1))
159: return true;
160: }
]
|
| 27/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 23810
output: 37
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, rendered in the first person, as if I'm the one having these thoughts, targeting an expert audience:
**Diving into `kernel/kcsan/report.c`**
Alright, time to dig deeper. The investigation clearly points to `kernel/kcsan/report.c` as the next logical stop. I know this module intimately, but it's always good to refresh my memory, especially when troubleshooting. I'm focusing my attention there to see how the reports are constructed and if I can immediately identify any potential issues with the reporting logic, data formatting, or any race conditions within the reporting mechanism itself. I expect that a subtle bug there, could be causing the observed anomalous behavior. Maybe there's a problem with how the KCSan data is marshalled, or how it's sent upstream. I'll be looking for anything that might be introducing inconsistencies or corruption in the reported data, specifically related to the problematic scenarios the user is describing. I'll need to pay close attention to the lock interactions, memory barriers and any potentially shared data structures. This is where the magic happens, so let's see what's actually going on.
|
| 28/2 |
2026/11/18 23:42 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:161 LineCount:80]
Results: map[Contents: 161:
162: use_entry->time = jiffies;
163: use_entry->frame1 = frame1;
164: use_entry->frame2 = frame2;
165: return false;
166: }
167:
168: /*
169: * Special rules to skip reporting.
170: */
171: static bool
172: skip_report(enum kcsan_value_change value_change, unsigned long top_frame)
173: {
174: /* Should never get here if value_change==FALSE. */
175: WARN_ON_ONCE(value_change == KCSAN_VALUE_CHANGE_FALSE);
176:
177: /*
178: * The first call to skip_report always has value_change==TRUE, since we
179: * cannot know the value written of an instrumented access. For the 2nd
180: * call there are 6 cases with CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY:
181: *
182: * 1. read watchpoint, conflicting write (value_change==TRUE): report;
183: * 2. read watchpoint, conflicting write (value_change==MAYBE): skip;
184: * 3. write watchpoint, conflicting write (value_change==TRUE): report;
185: * 4. write watchpoint, conflicting write (value_change==MAYBE): skip;
186: * 5. write watchpoint, conflicting read (value_change==MAYBE): skip;
187: * 6. write watchpoint, conflicting read (value_change==TRUE): report;
188: *
189: * Cases 1-4 are intuitive and expected; case 5 ensures we do not report
190: * data races where the write may have rewritten the same value; case 6
191: * is possible either if the size is larger than what we check value
192: * changes for or the access type is KCSAN_ACCESS_ASSERT.
193: */
194: if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) &&
195: value_change == KCSAN_VALUE_CHANGE_MAYBE) {
196: /*
197: * The access is a write, but the data value did not change.
198: *
199: * We opt-out of this filter for certain functions at request of
200: * maintainers.
201: */
202: char buf[64];
203: int len = scnprintf(buf, sizeof(buf), "%ps", (void *)top_frame);
204:
205: if (!strnstr(buf, "rcu_", len) &&
206: !strnstr(buf, "_rcu", len) &&
207: !strnstr(buf, "_srcu", len))
208: return true;
209: }
210:
211: return kcsan_skip_report_debugfs(top_frame);
212: }
213:
214: static const char *get_access_type(int type)
215: {
216: if (type & KCSAN_ACCESS_ASSERT) {
217: if (type & KCSAN_ACCESS_SCOPED) {
218: if (type & KCSAN_ACCESS_WRITE)
219: return "assert no accesses (reordered)";
220: else
221: return "assert no writes (reordered)";
222: } else {
223: if (type & KCSAN_ACCESS_WRITE)
224: return "assert no accesses";
225: else
226: return "assert no writes";
227: }
228: }
229:
230: switch (type) {
231: case 0:
232: return "read";
233: case KCSAN_ACCESS_ATOMIC:
234: return "read (marked)";
235: case KCSAN_ACCESS_WRITE:
236: return "write";
237: case KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
238: return "write (marked)";
239: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
240: return "read-write";
]
|
| 29/2 |
2026/11/18 23:42 |
llm |
expert |
0m
Model:
Tokens:
input: 25403
output: 37
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, rendered in the first person, as if I'm the one having these thoughts, targeting an expert audience:
**Diving into `kernel/kcsan/report.c`**
Alright, time to dig deeper. The investigation clearly points to `kernel/kcsan/report.c` as the next logical stop. I know this module intimately, but it's always good to refresh my memory, especially when troubleshooting. I'm focusing my attention there to see how the reports are constructed and if I can immediately identify any potential issues with the reporting logic, data formatting, or any race conditions within the reporting mechanism itself. I expect that a subtle bug there, could be causing the observed anomalous behavior. Maybe there's a problem with how the KCSan data is marshalled, or how it's sent upstream. I'll be looking for anything that might be introducing inconsistencies or corruption in the reported data, specifically related to the problematic scenarios the user is describing. I'll need to pay close attention to the lock interactions, memory barriers and any potentially shared data structures. This is where the magic happens, so let's see what's actually going on.
|
| 30/2 |
2026/11/18 23:43 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:241 LineCount:80]
Results: map[Contents: 241: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
242: return "read-write (marked)";
243: case KCSAN_ACCESS_SCOPED:
244: return "read (reordered)";
245: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_ATOMIC:
246: return "read (marked, reordered)";
247: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE:
248: return "write (reordered)";
249: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
250: return "write (marked, reordered)";
251: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
252: return "read-write (reordered)";
253: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
254: return "read-write (marked, reordered)";
255: default:
256: BUG();
257: }
258: }
259:
260: static const char *get_bug_type(int type)
261: {
262: return (type & KCSAN_ACCESS_ASSERT) != 0 ? "assert: race" : "data-race";
263: }
264:
265: /* Return thread description: in task or interrupt. */
266: static const char *get_thread_desc(int task_id)
267: {
268: if (task_id != -1) {
269: static char buf[32]; /* safe: protected by report_lock */
270:
271: snprintf(buf, sizeof(buf), "task %i", task_id);
272: return buf;
273: }
274: return "interrupt";
275: }
276:
277: /* Helper to skip KCSAN-related functions in stack-trace. */
278: static int get_stack_skipnr(const unsigned long stack_entries[], int num_entries)
279: {
280: char buf[64];
281: char *cur;
282: int len, skip;
283:
284: for (skip = 0; skip < num_entries; ++skip) {
285: len = scnprintf(buf, sizeof(buf), "%ps", (void *)stack_entries[skip]);
286:
287: /* Never show tsan_* or {read,write}_once_size. */
288: if (strnstr(buf, "tsan_", len) ||
289: strnstr(buf, "_once_size", len))
290: continue;
291:
292: cur = strnstr(buf, "kcsan_", len);
293: if (cur) {
294: cur += strlen("kcsan_");
295: if (!str_has_prefix(cur, "test"))
296: continue; /* KCSAN runtime function. */
297: /* KCSAN related test. */
298: }
299:
300: /*
301: * No match for runtime functions -- @skip entries to skip to
302: * get to first frame of interest.
303: */
304: break;
305: }
306:
307: return skip;
308: }
309:
310: /*
311: * Skips to the first entry that matches the function of @ip, and then replaces
312: * that entry with @ip, returning the entries to skip with @replaced containing
313: * the replaced entry.
314: */
315: static int
316: replace_stack_entry(unsigned long stack_entries[], int num_entries, unsigned long ip,
317: unsigned long *replaced)
318: {
319: unsigned long symbolsize, offset;
320: unsigned long target_func;
]
|
| 31/2 |
2026/11/18 23:43 |
llm |
expert |
0m
Model:
Tokens:
input: 26962
output: 37
thoughts: 28
Thoughts: Okay, here's my attempt at summarizing that thought process, tailored for an expert audience, and in the first person:
**Analyzing Kernel KCSAN Data-Race Reporting**
Alright, I'm diving into this specific data-race report within the kernel. My immediate focus is on how the message, specifically relating to a "data-race in ... / ...," is constructed and printed within `kernel/kcsan/report.c`. I need to understand the formatting, the variables used, and any conditional logic involved in presenting the race information. I'm looking for the core code block responsible for outputting this particular message. This will allow me to, understand it's construction, and if necessary, adapt it for specific needs.
|
| 32/2 |
2026/11/18 23:43 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:380 LineCount:80]
Results: map[Contents: 380: if (!task)
381: return;
382:
383: /* Restore IRQ state trace for printing. */
384: kcsan_restore_irqtrace(task);
385:
386: pr_err("\n");
387: debug_show_held_locks(task);
388: print_irqtrace_events(task);
389: }
390:
391: static void print_report(enum kcsan_value_change value_change,
392: const struct access_info *ai,
393: struct other_info *other_info,
394: u64 old, u64 new, u64 mask)
395: __must_hold(&report_lock)
396: {
397: unsigned long reordered_to = 0;
398: unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 };
399: int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
400: int skipnr = sanitize_stack_entries(stack_entries, num_stack_entries, ai->ip, &reordered_to);
401: unsigned long this_frame = stack_entries[skipnr];
402: unsigned long other_reordered_to = 0;
403: unsigned long other_frame = 0;
404: int other_skipnr = 0; /* silence uninit warnings */
405:
406: /*
407: * Must check report filter rules before starting to print.
408: */
409: if (skip_report(KCSAN_VALUE_CHANGE_TRUE, stack_entries[skipnr]))
410: return;
411:
412: if (other_info) {
413: other_skipnr = sanitize_stack_entries(other_info->stack_entries,
414: other_info->num_stack_entries,
415: other_info->ai.ip, &other_reordered_to);
416: other_frame = other_info->stack_entries[other_skipnr];
417:
418: /* @value_change is only known for the other thread */
419: if (skip_report(value_change, other_frame))
420: return;
421: }
422:
423: if (rate_limit_report(this_frame, other_frame))
424: return;
425:
426: /* Print report header. */
427: pr_err("==================================================================\n");
428: if (other_info) {
429: int cmp;
430:
431: /*
432: * Order functions lexographically for consistent bug titles.
433: * Do not print offset of functions to keep title short.
434: */
435: cmp = sym_strcmp((void *)other_frame, (void *)this_frame);
436: pr_err("BUG: KCSAN: %s in %ps / %ps\n",
437: get_bug_type(ai->access_type | other_info->ai.access_type),
438: (void *)(cmp < 0 ? other_frame : this_frame),
439: (void *)(cmp < 0 ? this_frame : other_frame));
440: } else {
441: pr_err("BUG: KCSAN: %s in %pS\n", get_bug_type(ai->access_type),
442: (void *)this_frame);
443: }
444:
445: pr_err("\n");
446:
447: /* Print information about the racing accesses. */
448: if (other_info) {
449: pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
450: get_access_type(other_info->ai.access_type), other_info->ai.ptr,
451: other_info->ai.size, get_thread_desc(other_info->ai.task_pid),
452: other_info->ai.cpu_id);
453:
454: /* Print the other thread's stack trace. */
455: print_stack_trace(other_info->stack_entries + other_skipnr,
456: other_info->num_stack_entries - other_skipnr,
457: other_reordered_to);
458: if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
459: print_verbose_info(other_info->task);
]
|
| 33/2 |
2026/11/18 23:43 |
llm |
expert |
0m
Model:
Tokens:
input: 28541
output: 31
thoughts: 392
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, so I'm diving into this KCSAN report, specifically looking at lines 428-457. The critical block is: `if (other_info)` followed by a `sym_strcmp` comparison. It looks like it's flagging a data race. Then we have `pr_err` calls for the error message, and a call to `print_stack_trace`.
The report itself reads: "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid." Interesting. It notes a read *and* a read-write to the same memory location (0xffff888104b4116c of 4 bytes) by the same task (3283) on the same CPU (1). The backtrace points to `capable_wrt_inode_uidgid`. That function is suspect.
The thing that immediately jumps out at me is that `other_frame` is 0, which should never happen if `other_info` is properly populated, and the stack trace is empty. So, I need to figure out why this is. Is it that `other_info->num_stack_entries - other_skipnr` is 0, or is the `other_info->stack_entries` empty? Either would lead to the lack of a stack trace.
My next step is clear: I need to trace where `other_info` is actually populated within the KCSAN core in `kernel/kcsan/core.c`. I need to understand when and how this data structure is filled to figure out why this particular case is leading to these null or empty values, especially the `other_frame` of 0.
|
| 34/2 |
2026/11/18 23:43 |
tool |
grepper |
0m
Args: map[Expression:num_stack_entries PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/report.c=42=struct other_info {
--
kernel/kcsan/report.c-44- unsigned long stack_entries[NUM_STACK_ENTRIES];
kernel/kcsan/report.c:45: int num_stack_entries;
kernel/kcsan/report.c-46-
--
kernel/kcsan/report.c=391=static void print_report(enum kcsan_value_change value_change,
--
kernel/kcsan/report.c-398- unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 };
kernel/kcsan/report.c:399: int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
kernel/kcsan/report.c:400: int skipnr = sanitize_stack_entries(stack_entries, num_stack_entries, ai->ip, &reordered_to);
kernel/kcsan/report.c-401- unsigned long this_frame = stack_entries[skipnr];
--
kernel/kcsan/report.c-413- other_skipnr = sanitize_stack_entries(other_info->stack_entries,
kernel/kcsan/report.c:414: other_info->num_stack_entries,
kernel/kcsan/report.c-415- other_info->ai.ip, &other_reordered_to);
--
kernel/kcsan/report.c-455- print_stack_trace(other_info->stack_entries + other_skipnr,
kernel/kcsan/report.c:456: other_info->num_stack_entries - other_skipnr,
kernel/kcsan/report.c-457- other_reordered_to);
--
kernel/kcsan/report.c-470- /* Print stack trace of this thread. */
kernel/kcsan/report.c:471: print_stack_trace(stack_entries + skipnr, num_stack_entries - skipnr, reordered_to);
kernel/kcsan/report.c-472- if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
--
kernel/kcsan/report.c=575=static void prepare_report_producer(unsigned long *flags,
--
kernel/kcsan/report.c-597- other_info->ai = *ai;
kernel/kcsan/report.c:598: other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);
kernel/kcsan/report.c-599-
]
|
| 35/2 |
2026/11/18 23:43 |
llm |
expert |
0m
Model:
Tokens:
input: 30046
output: 37
thoughts: 33
Thoughts: Here's my take on the thought process, tailored for an expert audience:
**Diving into the KCSAN Reporting Logic**
Alright, let's zero in on how KCSAN reports its findings. I need to understand the report generation process, and the `prepare_report_producer` function seems like the logical starting point. I suspect it orchestrates the assembly of the report data. Now, to get the specifics, I'll jump into the code. I'm going to navigate directly to line 575 in `kernel/kcsan/report.c`, as that's often where core functionality around report preparation kicks off. This should give me a good handle on how the report data is structured and potentially, what data gets included, and how the reporting data structure is populated with data. I'm keen to see the details of memory layout, stack tracing and potentially if these are captured in a structured way for parsing or if it uses text-based parsing tools.
|
| 36/2 |
2026/11/18 23:43 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:565 LineCount:50]
Results: map[Contents: 565: * If invalid, or @ptr nor @current matches, then @other_info
566: * has been consumed and we may continue. If not, retry.
567: */
568: } while (other_info->ai.size && other_info->ai.ptr == ai->ptr &&
569: other_info->task == current);
570: if (is_running)
571: set_current_state(TASK_RUNNING);
572: }
573:
574: /* Populate @other_info; requires that the provided @other_info not in use. */
575: static void prepare_report_producer(unsigned long *flags,
576: const struct access_info *ai,
577: struct other_info *other_info)
578: __must_not_hold(&report_lock)
579: {
580: raw_spin_lock_irqsave(&report_lock, *flags);
581:
582: /*
583: * The same @other_infos entry cannot be used concurrently, because
584: * there is a one-to-one mapping to watchpoint slots (@watchpoints in
585: * core.c), and a watchpoint is only released for reuse after reporting
586: * is done by the consumer of @other_info. Therefore, it is impossible
587: * for another concurrent prepare_report_producer() to set the same
588: * @other_info, and are guaranteed exclusivity for the @other_infos
589: * entry pointed to by @other_info.
590: *
591: * To check this property holds, size should never be non-zero here,
592: * because every consumer of struct other_info resets size to 0 in
593: * release_report().
594: */
595: WARN_ON(other_info->ai.size);
596:
597: other_info->ai = *ai;
598: other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);
599:
600: if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
601: set_other_info_task_blocking(flags, ai, other_info);
602:
603: raw_spin_unlock_irqrestore(&report_lock, *flags);
604: }
605:
606: /* Awaits producer to fill @other_info and then returns. */
607: static bool prepare_report_consumer(unsigned long *flags,
608: const struct access_info *ai,
609: struct other_info *other_info)
610: __cond_acquires(true, &report_lock)
611: {
612:
613: raw_spin_lock_irqsave(&report_lock, *flags);
614: while (!other_info->ai.size) { /* Await valid @other_info. */
]
|
| 37/2 |
2026/11/18 23:43 |
llm |
expert |
0m
Model:
Tokens:
input: 31197
output: 31
thoughts: 30
Thoughts: Here's a summary of my thought process:
**Tracing `prepare_report_producer`**
Okay, so I need to figure out where the `prepare_report_producer` function is called within the `kernel/kcsan/core.c` file. It's crucial for understanding the KCSAN (Kernel Concurrency Sanitizer) reporting mechanism. I need to trace its usage to understand its context and how it's integrated into the larger KCSAN data flow. Let's dig into the code and find those call sites. This should be straightforward.
|
| 38/2 |
2026/11/18 23:43 |
tool |
grepper |
0m
Args: map[Expression:prepare_report_producer PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/report.c=516=static void set_other_info_task_blocking(unsigned long *flags,
--
kernel/kcsan/report.c-574-/* Populate @other_info; requires that the provided @other_info not in use. */
kernel/kcsan/report.c:575:static void prepare_report_producer(unsigned long *flags,
kernel/kcsan/report.c-576- const struct access_info *ai,
--
kernel/kcsan/report.c-586- * is done by the consumer of @other_info. Therefore, it is impossible
kernel/kcsan/report.c:587: * for another concurrent prepare_report_producer() to set the same
kernel/kcsan/report.c-588- * @other_info, and are guaranteed exclusivity for the @other_infos
--
kernel/kcsan/report.c=656=void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
--
kernel/kcsan/report.c-664-
kernel/kcsan/report.c:665: prepare_report_producer(&flags, &ai, &other_infos[watchpoint_idx]);
kernel/kcsan/report.c-666-
]
|
| 39/2 |
2026/11/18 23:43 |
llm |
expert |
0m
Model:
Tokens:
input: 31723
output: 29
thoughts: 370
Thoughts: **Debugging a Suspected Race Condition**
Okay, let's dive into this. I'm looking at `prepare_report_producer`, and I see this line: `other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);`. That looks innocent enough, but then I'm thinking, hold on... why would `num_stack_entries` ever be zero after this call? Or, even more strangely, why would `other_frame` ever be zero? It's a bit odd. Then I see something interesting... `task 3283 on cpu 1`!
Wait, both accesses I'm looking at are by the same `task 3283 on cpu 1`! That's when alarm bells go off. How can a single task, running on a single CPU, race with *itself*? That just doesn't compute. A race condition implies two or more things that could run out of order. How is this possible?
Could there be an interrupt involved? That's the only way I can see this happening. What happens if an interrupt occurs on CPU 1 while `task 3283` is running? Who is `current` during an interrupt in the Linux kernel?
Ah, right! In Linux, during an interrupt (IRQ/softirq), `current` *is* the interrupted task! So, maybe that's it! If it were an interrupt, what would `get_thread_desc` print? That would be useful information.
Let's look at `get_thread_desc`. I see the code, and I see the crucial conditional:
static const char *get_thread_desc(int task_id)
{
if (task_id != -1) {
static char buf[32]; // safe: protected by report_lock
snprintf(buf, sizeof(buf), "task %i", task_id);
return buf;
}
return "interrupt";
}
Okay, if `task_id` is `-1`, it returns "interrupt". That is useful. But I still need to know where `ai.task_pid` comes from? Where is the information being populated? I need to check either `kcsan_report_set_info` or wherever `ai` is filled to trace the origin of this variable. The investigation continues!
|
| 40/2 |
2026/11/18 23:44 |
tool |
grepper |
0m
Args: map[Expression:task_pid PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/report.c=29=struct access_info {
--
kernel/kcsan/report.c-32- int access_type;
kernel/kcsan/report.c:33: int task_pid;
kernel/kcsan/report.c-34- int cpu_id;
--
kernel/kcsan/report.c=42=struct other_info {
--
kernel/kcsan/report.c-48- * Optionally pass @current. Typically we do not need to pass @current
kernel/kcsan/report.c:49: * via @other_info since just @task_pid is sufficient. Passing @current
kernel/kcsan/report.c-50- * has additional overhead.
--
kernel/kcsan/report.c=391=static void print_report(enum kcsan_value_change value_change,
--
kernel/kcsan/report.c-450- get_access_type(other_info->ai.access_type), other_info->ai.ptr,
kernel/kcsan/report.c:451: other_info->ai.size, get_thread_desc(other_info->ai.task_pid),
kernel/kcsan/report.c-452- other_info->ai.cpu_id);
--
kernel/kcsan/report.c-463- get_access_type(ai->access_type), ai->ptr, ai->size,
kernel/kcsan/report.c:464: get_thread_desc(ai->task_pid), ai->cpu_id);
kernel/kcsan/report.c-465- } else {
--
kernel/kcsan/report.c-467- get_access_type(ai->access_type), ai->ptr, ai->size,
kernel/kcsan/report.c:468: get_thread_desc(ai->task_pid), ai->cpu_id);
kernel/kcsan/report.c-469- }
--
kernel/kcsan/report.c=642=static struct access_info prepare_access_info(const volatile void *ptr, size_t size,
--
kernel/kcsan/report.c-648- .access_type = access_type,
kernel/kcsan/report.c:649: .task_pid = in_task() ? task_pid_nr(current) : -1,
kernel/kcsan/report.c-650- .cpu_id = raw_smp_processor_id(),
]
|
| 41/2 |
2026/11/18 23:44 |
llm |
expert |
0m
Model:
Tokens:
input: 33326
output: 37
thoughts: 213
Thoughts: **KCSAN Watchpoint Confusion**
Okay, let's break this down. Line 649, specifically that `in_task() ? task_pid_nr(current) : -1` part, is throwing me for a loop. If we're *not* in a task (i.e., we're in an interrupt context), then `task_pid` *should* be -1, and it *should* print "interrupt". But that's not what I'm seeing! I'm getting output like: `"read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:"`. Hold on a minute... `in_task()` *is* TRUE!
So now the question is this: How is task 3283 both setting the watchpoint AND the one accessing the memory? How does this KCSAN watchpoint mechanism *actually* function? This makes absolutely no sense. I need to dive into `kernel/kcsan/core.c` now and trace this through because something is fundamentally misunderstanding what is happening here.
|
| 42/2 |
2026/11/18 23:44 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:400 LineCount:80]
Results: map[Contents: 400:
401: static __always_inline bool
402: find_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
403: int type, unsigned long ip)
404: {
405: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
406:
407: if (!reorder_access)
408: return false;
409:
410: /*
411: * Note: If accesses are repeated while reorder_access is identical,
412: * never matches the new access, because !(type & KCSAN_ACCESS_SCOPED).
413: */
414: return reorder_access->ptr == ptr && reorder_access->size == size &&
415: reorder_access->type == type && reorder_access->ip == ip;
416: }
417:
418: static inline void
419: set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
420: int type, unsigned long ip)
421: {
422: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
423:
424: if (!reorder_access || !kcsan_weak_memory)
425: return;
426:
427: /*
428: * To avoid nested interrupts or scheduler (which share kcsan_ctx)
429: * reading an inconsistent reorder_access, ensure that the below has
430: * exclusive access to reorder_access by disallowing concurrent use.
431: */
432: ctx->disable_scoped++;
433: barrier();
434: reorder_access->ptr = ptr;
435: reorder_access->size = size;
436: reorder_access->type = type | KCSAN_ACCESS_SCOPED;
437: reorder_access->ip = ip;
438: reorder_access->stack_depth = get_kcsan_stack_depth();
439: barrier();
440: ctx->disable_scoped--;
441: }
442:
443: /*
444: * Pull everything together: check_access() below contains the performance
445: * critical operations; the fast-path (including check_access) functions should
446: * all be inlinable by the instrumentation functions.
447: *
448: * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
449: * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
450: * be filtered from the stacktrace, as well as give them unique names for the
451: * UACCESS whitelist of objtool. Each function uses user_access_save/restore(),
452: * since they do not access any user memory, but instrumentation is still
453: * emitted in UACCESS regions.
454: */
455:
456: static noinline void kcsan_found_watchpoint(const volatile void *ptr,
457: size_t size,
458: int type,
459: unsigned long ip,
460: atomic_long_t *watchpoint,
461: long encoded_watchpoint)
462: {
463: const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
464: struct kcsan_ctx *ctx = get_ctx();
465: unsigned long flags;
466: bool consumed;
467:
468: /*
469: * We know a watchpoint exists. Let's try to keep the race-window
470: * between here and finally consuming the watchpoint below as small as
471: * possible -- avoid unneccessarily complex code until consumed.
472: */
473:
474: if (!kcsan_is_enabled(ctx))
475: return;
476:
477: /*
478: * The access_mask check relies on value-change comparison. To avoid
479: * reporting a race where e.g. the writer set up the watchpoint, but the
]
|
| 43/2 |
2026/11/18 23:44 |
llm |
expert |
0m
Model:
Tokens:
input: 35095
output: 37
thoughts: 27
Thoughts: Okay, here's my attempt at summarizing the thought process, as requested, aimed at an expert audience and in the first person:
**Diving into KCSAN Watchpoints**
Alright, time to dig deeper. I need to understand the mechanics of how KCSAN handles watchpoints. My immediate focus is on the functions `kcsan_found_watchpoint` and `kcsan_setup_watchpoint`. I'm hoping to get a clearer picture of the control flow within these. Specifically, I want to see how a watchpoint is detected and then, what are the steps to actually setting it up for scanning. I'm looking for the instrumentation details, the data structures involved, and any specific optimizations or considerations the KCSAN design employs here. Understanding the interaction between these two functions will reveal the heart of KCSAN's watchpoint implementation. This should tell me how efficiently KCSAN is catching these tricky, data-race-prone regions.
|
| 44/2 |
2026/11/18 23:44 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:480 LineCount:90]
Results: map[Contents: 480: * reader has access_mask!=0, we have to ignore the found watchpoint.
481: *
482: * reorder_access is never created from an access with access_mask set.
483: */
484: if (ctx->access_mask && !find_reorder_access(ctx, ptr, size, type, ip))
485: return;
486:
487: /*
488: * If the other thread does not want to ignore the access, and there was
489: * a value change as a result of this thread's operation, we will still
490: * generate a report of unknown origin.
491: *
492: * Use CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=n to filter.
493: */
494: if (!is_assert && kcsan_ignore_address(ptr))
495: return;
496:
497: /*
498: * Consuming the watchpoint must be guarded by kcsan_is_enabled() to
499: * avoid erroneously triggering reports if the context is disabled.
500: */
501: consumed = try_consume_watchpoint(watchpoint, encoded_watchpoint);
502:
503: /* keep this after try_consume_watchpoint */
504: flags = user_access_save();
505:
506: if (consumed) {
507: kcsan_save_irqtrace(current);
508: kcsan_report_set_info(ptr, size, type, ip, watchpoint - watchpoints);
509: kcsan_restore_irqtrace(current);
510: } else {
511: /*
512: * The other thread may not print any diagnostics, as it has
513: * already removed the watchpoint, or another thread consumed
514: * the watchpoint before this thread.
515: */
516: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_REPORT_RACES]);
517: }
518:
519: if (is_assert)
520: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
521: else
522: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_DATA_RACES]);
523:
524: user_access_restore(flags);
525: }
526:
527: static noinline void
528: kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
529: {
530: const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
531: const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
532: atomic_long_t *watchpoint;
533: u64 old, new, diff;
534: enum kcsan_value_change value_change = KCSAN_VALUE_CHANGE_MAYBE;
535: bool interrupt_watcher = kcsan_interrupt_watcher;
536: unsigned long ua_flags = user_access_save();
537: struct kcsan_ctx *ctx = get_ctx();
538: unsigned long access_mask = ctx->access_mask;
539: unsigned long irq_flags = 0;
540: bool is_reorder_access;
541:
542: /*
543: * Always reset kcsan_skip counter in slow-path to avoid underflow; see
544: * should_watch().
545: */
546: reset_kcsan_skip();
547:
548: if (!kcsan_is_enabled(ctx))
549: goto out;
550:
551: /*
552: * Check to-ignore addresses after kcsan_is_enabled(), as we may access
553: * memory that is not yet initialized during early boot.
554: */
555: if (!is_assert && kcsan_ignore_address(ptr))
556: goto out;
557:
558: if (!check_encodable((unsigned long)ptr, size)) {
559: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_UNENCODABLE_ACCESSES]);
560: goto out;
561: }
562:
563: /*
564: * The local CPU cannot observe reordering of its own accesses, and
565: * therefore we need to take care of 2 cases to avoid false positives:
566: *
567: * 1. Races of the reordered access with interrupts. To avoid, if
568: * the current access is reorder_access, disable interrupts.
569: * 2. Avoid races of scoped accesses from nested interrupts (below).
]
|
| 45/2 |
2026/11/18 23:44 |
llm |
expert |
0m
Model:
Tokens:
input: 36806
output: 37
thoughts: 16
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience, and written in the first person:
**Diving into `kcsan_setup_watchpoint`**
Alright, let's see what's going on here. The context clearly points me towards the `kcsan_setup_watchpoint` function. I'm already anticipating some of the usual suspects β likely register setup, perhaps some memory mapping considerations, and of course, the interaction with KCSAN's underlying mechanisms for detecting data races. I'm going to quickly scan for the core logic and critical data structures involved. I'll be looking for how the watchpoint is established, how the target memory address is handled, and how KCSAN integrates with the hardware, maybe some internal KCSAN state updates as well. I'll be making mental notes on anything potentially performance-sensitive or prone to race conditions *within* KCSAN itself, as those are the trickiest to track down. Gotta keep an eye out for any subtle assumptions made about the architecture or memory layout. I'm expecting some register manipulation, some likely calls into lower level functions dealing with memory access tracking. Let's see if my mental model lines up with what's actually implemented. Time to dive in.
|
| 46/2 |
2026/11/18 23:44 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:570 LineCount:80]
Results: map[Contents: 570: */
571: is_reorder_access = find_reorder_access(ctx, ptr, size, type, ip);
572: if (is_reorder_access)
573: interrupt_watcher = false;
574: /*
575: * Avoid races of scoped accesses from nested interrupts (or scheduler).
576: * Assume setting up a watchpoint for a non-scoped (normal) access that
577: * also conflicts with a current scoped access. In a nested interrupt,
578: * which shares the context, it would check a conflicting scoped access.
579: * To avoid, disable scoped access checking.
580: */
581: ctx->disable_scoped++;
582:
583: /*
584: * Save and restore the IRQ state trace touched by KCSAN, since KCSAN's
585: * runtime is entered for every memory access, and potentially useful
586: * information is lost if dirtied by KCSAN.
587: */
588: kcsan_save_irqtrace(current);
589: if (!interrupt_watcher) {
590: local_irq_save(irq_flags);
591: /*
592: * NMIs can still fire, disable checking for all interrupt
593: * contexts.
594: */
595: raw_cpu_ptr(&kcsan_cpu_ctx)->disable_count++;
596: }
597:
598: watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
599: if (watchpoint == NULL) {
600: /*
601: * Out of capacity: the size of 'watchpoints', and the frequency
602: * with which should_watch() returns true should be tweaked so
603: * that this case happens very rarely.
604: */
605: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_NO_CAPACITY]);
606: goto out_unlock;
607: }
608:
609: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_SETUP_WATCHPOINTS]);
610: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
611:
612: /*
613: * Read the current value, to later check and infer a race if the data
614: * was modified via a non-instrumented access, e.g. from a device.
615: */
616: old = is_reorder_access ? 0 : read_instrumented_memory(ptr, size);
617:
618: /*
619: * Delay this thread, to increase probability of observing a racy
620: * conflicting access.
621: */
622: delay_access(type);
623:
624: /*
625: * Re-read value, and check if it is as expected; if not, we infer a
626: * racy access.
627: */
628: if (!is_reorder_access) {
629: new = read_instrumented_memory(ptr, size);
630: } else {
631: /*
632: * Reordered accesses cannot be used for value change detection,
633: * because the memory location may no longer be accessible and
634: * could result in a fault.
635: */
636: new = 0;
637: access_mask = 0;
638: }
639:
640: diff = old ^ new;
641: if (access_mask)
642: diff &= access_mask;
643:
644: /*
645: * Check if we observed a value change.
646: *
647: * Also check if the data race should be ignored (the rules depend on
648: * non-zero diff); if it is to be ignored, the below rules for
649: * KCSAN_VALUE_CHANGE_MAYBE apply.
]
|
| 47/2 |
2026/11/18 23:44 |
llm |
expert |
0m
Model:
Tokens:
input: 38329
output: 37
thoughts: 26
Thoughts: Okay, here's the summary, assuming I'm deeply familiar with this field and have been prompted to review some code or text:
**Focusing In: Strategic Section Review**
Right, okay, let's zero in on a specific area within this document or code. It's clear that the critical information I need is located within the range of lines 640 through 690. Given my expertise, I'm already anticipating the nuances and potential challenges this section will present. Expanding my search slightly, I think I will focus on lines 650 through 710 to make sure I grasp everything.
|
| 48/2 |
2026/11/18 23:44 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:650 LineCount:60]
Results: map[Contents: 650: */
651: if (diff && !kcsan_ignore_data_race(size, type, old, new, diff))
652: value_change = KCSAN_VALUE_CHANGE_TRUE;
653:
654: /* Check if this access raced with another. */
655: if (!consume_watchpoint(watchpoint)) {
656: /*
657: * Depending on the access type, map a value_change of MAYBE to
658: * TRUE (always report) or FALSE (never report).
659: */
660: if (value_change == KCSAN_VALUE_CHANGE_MAYBE) {
661: if (access_mask != 0) {
662: /*
663: * For access with access_mask, we require a
664: * value-change, as it is likely that races on
665: * ~access_mask bits are expected.
666: */
667: value_change = KCSAN_VALUE_CHANGE_FALSE;
668: } else if (size > 8 || is_assert) {
669: /* Always assume a value-change. */
670: value_change = KCSAN_VALUE_CHANGE_TRUE;
671: }
672: }
673:
674: /*
675: * No need to increment 'data_races' counter, as the racing
676: * thread already did.
677: *
678: * Count 'assert_failures' for each failed ASSERT access,
679: * therefore both this thread and the racing thread may
680: * increment this counter.
681: */
682: if (is_assert && value_change == KCSAN_VALUE_CHANGE_TRUE)
683: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
684:
685: kcsan_report_known_origin(ptr, size, type, ip,
686: value_change, watchpoint - watchpoints,
687: old, new, access_mask);
688: } else if (value_change == KCSAN_VALUE_CHANGE_TRUE) {
689: /* Inferring a race, since the value should not have changed. */
690:
691: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN]);
692: if (is_assert)
693: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
694:
695: if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN) || is_assert) {
696: kcsan_report_unknown_origin(ptr, size, type, ip,
697: old, new, access_mask);
698: }
699: }
700:
701: /*
702: * Remove watchpoint; must be after reporting, since the slot may be
703: * reused after this point.
704: */
705: remove_watchpoint(watchpoint);
706: atomic_long_dec(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
707:
708: out_unlock:
709: if (!interrupt_watcher) {
]
|
| 49/2 |
2026/11/18 23:44 |
llm |
expert |
0m
Model:
Tokens:
input: 39508
output: 35
thoughts: 77
Thoughts: Okay, let's break this down.
**Diving into the KCSAN Report Function**
Alright, my eye immediately went to line 685 β that specific function call, `kcsan_report_known_origin`. Right there: `kcsan_report_known_origin(ptr, size, type, ip, value_change, watchpoint - watchpoints, old, new, access_mask);`. Interesting. It's clearly reporting something, and the arguments give us some immediate clues: we have a pointer, `ptr`, a `size`, a `type`, and an `ip`. The `value_change` argument will be important. Then we see something about `watchpoint` and `watchpoints`, which implies some sort of watchpoint mechanism is being utilized. We've got `old`, `new` values, and an `access_mask`. This seems like a core function for reporting data races or memory errors detected by KCSAN. My immediate impulse is to jump over to where that function is actually *defined*. I need to understand what it *does* to fully grasp the context. Let's head over to `kernel/kcsan/report.c`. The code in there holds the key to the significance of these arguments and the overall problem being addressed.
|
| 50/2 |
2026/11/18 23:45 |
tool |
grepper |
0m
Args: map[Expression:kcsan_report_known_origin PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=528=kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-684-
kernel/kcsan/core.c:685: kcsan_report_known_origin(ptr, size, type, ip,
kernel/kcsan/core.c-686- value_change, watchpoint - watchpoints,
--
kernel/kcsan/kcsan.h=123=void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
--
kernel/kcsan/kcsan.h-130- */
kernel/kcsan/kcsan.h:131:void kcsan_report_known_origin(const volatile void *ptr, size_t size, int access_type,
kernel/kcsan/kcsan.h-132- unsigned long ip, enum kcsan_value_change value_change,
--
kernel/kcsan/report.c=656=void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
--
kernel/kcsan/report.c-662- kcsan_disable_current();
kernel/kcsan/report.c:663: lockdep_off(); /* See kcsan_report_known_origin(). */
kernel/kcsan/report.c-664-
--
kernel/kcsan/report.c-670-
kernel/kcsan/report.c:671:void kcsan_report_known_origin(const volatile void *ptr, size_t size, int access_type,
kernel/kcsan/report.c-672- unsigned long ip, enum kcsan_value_change value_change,
--
kernel/kcsan/report.c=705=void kcsan_report_unknown_origin(const volatile void *ptr, size_t size, int access_type,
--
kernel/kcsan/report.c-711- kcsan_disable_current();
kernel/kcsan/report.c:712: lockdep_off(); /* See kcsan_report_known_origin(). */
kernel/kcsan/report.c-713-
]
|
| 51/2 |
2026/11/18 23:45 |
llm |
expert |
0m
Model:
Tokens:
input: 40502
output: 37
thoughts: 28
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing the Known Origin Reporting in KCSAN**
Alright, let's dive into this. The first thing I'm doing is zeroing in on `kcsan_report_known_origin` within `kernel/kcsan/report.c`. I need to understand how KCSAN is handling the reporting of data races when the origin of the problematic memory access *is* already known. This suggests a pre-existing analysis or instrumentation phase has given us some valuable clues, and now we need to leverage that to produce a more precise or informative report.
I immediately start to think about the implications. Is this about filtering out false positives by only reporting races linked to a specific known data structure or source? Or is it about enriching the report by including information about the location or type of the access? Perhaps it's a matter of prioritization; known origin races are often more critical and require immediate attention, so this function would play a central role in highlighting those issues.
My immediate questions are related to the information that gets added to a tracepoint or log. Is this a custom data structure that gets added or does it piggyback on existing tracepoint fields? What's the impact on performance for a known origin case? I need to analyze how this function interacts with the overall KCSAN framework, particularly how it integrates with the detection and analysis components. I'll need to figure out what data structures are passed into this function, what its return values are, and what side effects it has. The goal is to fully understand how known origins are integrated into the KCSAN reporting process.
|
| 52/2 |
2026/11/18 23:45 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:670 LineCount:40]
Results: map[Contents: 670:
671: void kcsan_report_known_origin(const volatile void *ptr, size_t size, int access_type,
672: unsigned long ip, enum kcsan_value_change value_change,
673: int watchpoint_idx, u64 old, u64 new, u64 mask)
674: {
675: const struct access_info ai = prepare_access_info(ptr, size, access_type, ip);
676: struct other_info *other_info = &other_infos[watchpoint_idx];
677: unsigned long flags = 0;
678:
679: kcsan_disable_current();
680: /*
681: * Because we may generate reports when we're in scheduler code, the use
682: * of printk() could deadlock. Until such time that all printing code
683: * called in print_report() is scheduler-safe, accept the risk, and just
684: * get our message out. As such, also disable lockdep to hide the
685: * warning, and avoid disabling lockdep for the rest of the kernel.
686: */
687: lockdep_off();
688:
689: if (!prepare_report_consumer(&flags, &ai, other_info))
690: goto out;
691: /*
692: * Never report if value_change is FALSE, only when it is
693: * either TRUE or MAYBE. In case of MAYBE, further filtering may
694: * be done once we know the full stack trace in print_report().
695: */
696: if (value_change != KCSAN_VALUE_CHANGE_FALSE)
697: print_report(value_change, &ai, other_info, old, new, mask);
698:
699: release_report(&flags, other_info);
700: out:
701: lockdep_on();
702: kcsan_enable_current();
703: }
704:
705: void kcsan_report_unknown_origin(const volatile void *ptr, size_t size, int access_type,
706: unsigned long ip, u64 old, u64 new, u64 mask)
707: {
708: const struct access_info ai = prepare_access_info(ptr, size, access_type, ip);
709: unsigned long flags;
]
|
| 53/2 |
2026/11/18 23:45 |
llm |
expert |
0m
Model:
Tokens:
input: 41623
output: 31
thoughts: 295
Thoughts: **Debugging a Report Consumer: Where's the Data?**
Okay, so I'm looking at `prepare_report_consumer`. It's straightforward enough, acquires `report_lock` and then enters a `while` loop, waiting for `other_info->ai.size` to be non-zero. The lock acquisition itself is fine, nothing particularly suspicious there. But then... *wait a minute*. How can `other_info` possibly have valid context like `task 3283 on cpu 1` with size `0x0`? That screams data race or initialization issue. It's a fundamental inconsistency!
Let's trace back to the producer, `prepare_report_producer`. I see `other_info->ai = *ai;` which is a direct copy, so the source is fine. Then, `stack_trace_save` is called, which copies the stack trace. Aha! What if `stack_trace_save` returns 0? That would explain the empty size. Or, what if there's an issue with the saved stack frames? The `other_frame` can't be zero either. This is the place to start looking.
Now, let me look at `sanitize_stack_entries` to see if there's a problem with the stack saving mechanism. I need to understand what it means to skip stack entries in that function; something must be going wrong. Looks like I need to look into `get_stack_skipnr`, specifically in `kernel/kcsan/report.c`. I have a feeling the stack trace manipulation is the key.
|
| 54/2 |
2026/11/18 23:45 |
tool |
grepper |
0m
Args: map[Expression:sanitize_stack_entries PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/report.c=348=static int
kernel/kcsan/report.c:349:sanitize_stack_entries(unsigned long stack_entries[], int num_entries, unsigned long ip,
kernel/kcsan/report.c-350- unsigned long *replaced)
--
kernel/kcsan/report.c=391=static void print_report(enum kcsan_value_change value_change,
--
kernel/kcsan/report.c-399- int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
kernel/kcsan/report.c:400: int skipnr = sanitize_stack_entries(stack_entries, num_stack_entries, ai->ip, &reordered_to);
kernel/kcsan/report.c-401- unsigned long this_frame = stack_entries[skipnr];
--
kernel/kcsan/report.c-412- if (other_info) {
kernel/kcsan/report.c:413: other_skipnr = sanitize_stack_entries(other_info->stack_entries,
kernel/kcsan/report.c-414- other_info->num_stack_entries,
]
|
| 55/2 |
2026/11/18 23:45 |
llm |
expert |
0m
Model:
Tokens:
input: 42620
output: 37
thoughts: 32
Thoughts: Okay, let's dive into this. I need to understand what's happening with `sanitize_stack_entries`. I'm going to focus on lines 348 through 375 of `kernel/kcsan/report.c`. I expect these lines to be crucial in how KCSAN sanitizes stack traces, probably in the context of reporting potential race conditions. I'm going to be looking for how the function identifies and potentially modifies stack frames to remove irrelevant or misleading information from a KCSAN report. I'll be paying close attention to any conditionals or loops used to process the stack entries and how the function handles different types of stack frames (kernel vs. user, etc.). I need to grasp the logic here to understand how effectively KCSAN filters out noise and presents a clean, actionable report to a developer. I'm hoping it's efficient; a bottleneck here would be unacceptable. Alright, let's see what we've got.
|
| 56/2 |
2026/11/18 23:45 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:348 LineCount:35]
Results: map[Contents: 348: static int
349: sanitize_stack_entries(unsigned long stack_entries[], int num_entries, unsigned long ip,
350: unsigned long *replaced)
351: {
352: return ip ? replace_stack_entry(stack_entries, num_entries, ip, replaced) :
353: get_stack_skipnr(stack_entries, num_entries);
354: }
355:
356: /* Compares symbolized strings of addr1 and addr2. */
357: static int sym_strcmp(void *addr1, void *addr2)
358: {
359: char buf1[64];
360: char buf2[64];
361:
362: snprintf(buf1, sizeof(buf1), "%pS", addr1);
363: snprintf(buf2, sizeof(buf2), "%pS", addr2);
364:
365: return strncmp(buf1, buf2, sizeof(buf1));
366: }
367:
368: static void
369: print_stack_trace(unsigned long stack_entries[], int num_entries, unsigned long reordered_to)
370: __must_hold(&report_lock)
371: {
372: stack_trace_print(stack_entries, num_entries, 0);
373: if (reordered_to)
374: pr_err(" |\n +-> reordered to: %pS\n", (void *)reordered_to);
375: }
376:
377: static void print_verbose_info(struct task_struct *task)
378: __must_hold(&report_lock)
379: {
380: if (!task)
381: return;
382:
]
|
| 57/2 |
2026/11/18 23:45 |
llm |
expert |
0m
Model:
Tokens:
input: 43437
output: 29
thoughts: 1367
Thoughts: **KCSAN Data-Race Analysis: Unpacking the Report**
Okay, let's break this down. First, the initial checks: if `num_entries` or `ip` are zero, `sanitize_stack_entries` returns zero, `stack_entries[0]` becomes zero, and `stack_trace_print` outputs nothing. That's a red herring. The real issue is that pesky "read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1." Where is *that* coming from?
The report shows a KCSAN data-race detected in `capable_wrt_inode_uidgid`. The crucial part is that `task 3283` is involved in *both* the read and the read-write access to the same memory location, `0xffff888104b4116c`. Let's trace this back. The read-write access traces back to the `capable_wrt_inode_uidgid` function, implying a potential privilege escalation or capability issue.
Now, the KCSAN mechanism comes into play. A thread sets up a watchpoint, say `Thread 1`. While this thread is paused in `delay_access`, `Thread 2` accesses the memory location and triggers `kcsan_found_watchpoint`. It consumes the watchpoint and populates `other_info` with the first part of the report. The key here is the order of events. This means that *our* thread (the one we're analyzing) *set up* the watchpoint!
The report prints `other_info` first, describing what triggered the watchpoint. Following that is the information about the thread which *set up* the watchpoint. In our case, the thread that *set up* the watchpoint was this same `task 3283`, with the "read-write" access in `capable_wrt_inode_uidgid` and its related functions. The second part, then, is the thread which *hit* the watchpoint and it was also the same `task 3283`, triggering a "read" access.
Let's focus: who set the watchpoint? It's `task 3283`, which wrote to the memory location from within `capable_wrt_inode_uidgid` where `current->flags |= PF_SUPERPRIV;`
And the report shows `PREEMPT(lazy)` which may suggest a preemption occurring during `delay_access` when KCSAN set the watchpoint. This is important: while `task 3283` was sleeping in `delay_access`, *something* else happened. That something else is the "read to" access, reported by the other part of the print. So the thread that caused the original access and set up the watchpoint hit it.
So, the next step is to examine what happens in the `delay_access` function in `kernel/kcsan/core.c`. We need to understand the exact conditions under which a context switch or interrupt might occur during this crucial KCSAN operation. This, I believe, holds the key to the data race.
|
| 58/2 |
2026/11/18 23:45 |
tool |
grepper |
0m
Args: map[Expression:delay_access PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=316=static __always_inline bool kcsan_is_enabled(struct kcsan_ctx *ctx)
--
kernel/kcsan/core.c-321-/* Introduce delay depending on context and configuration. */
kernel/kcsan/core.c:322:static void delay_access(int type)
kernel/kcsan/core.c-323-{
--
kernel/kcsan/core.c=528=kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-621- */
kernel/kcsan/core.c:622: delay_access(type);
kernel/kcsan/core.c-623-
]
|
| 59/2 |
2026/11/18 23:45 |
llm |
expert |
0m
Model:
Tokens:
input: 45742
output: 37
thoughts: 21
Thoughts: Okay, let's dive in. Here's my understanding of the situation, phrased as if it were my thought process:
**Diving into `delay_access`**
Alright, I'm going to take a look at the `delay_access` function, specifically in `kernel/kcsan/core.c`. I need to understand how this is handled within the KCSAN subsystem. This function is likely crucial for the data-race detection mechanism, so it's probably involved in introducing delays or otherwise manipulating memory access timings to expose potential concurrency issues. I'll need to dissect its purpose and how it fits into the broader KCSAN framework. Let's see what the code reveals.
|
| 60/2 |
2026/11/18 23:46 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:320 LineCount:50]
Results: map[Contents: 320:
321: /* Introduce delay depending on context and configuration. */
322: static void delay_access(int type)
323: {
324: unsigned int delay = in_task() ? kcsan_udelay_task : kcsan_udelay_interrupt;
325: /* For certain access types, skew the random delay to be longer. */
326: unsigned int skew_delay_order =
327: (type & (KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_ASSERT)) ? 1 : 0;
328:
329: delay -= IS_ENABLED(CONFIG_KCSAN_DELAY_RANDOMIZE) ?
330: kcsan_prandom_u32_max(delay >> skew_delay_order) :
331: 0;
332: udelay(delay);
333: }
334:
335: /*
336: * Reads the instrumented memory for value change detection; value change
337: * detection is currently done for accesses up to a size of 8 bytes.
338: */
339: static __always_inline u64 read_instrumented_memory(const volatile void *ptr, size_t size)
340: {
341: /*
342: * In the below we don't necessarily need the read of the location to
343: * be atomic, and we don't use READ_ONCE(), since all we need for race
344: * detection is to observe 2 different values.
345: *
346: * Furthermore, on certain architectures (such as arm64), READ_ONCE()
347: * may turn into more complex instructions than a plain load that cannot
348: * do unaligned accesses.
349: */
350: switch (size) {
351: case 1: return *(const volatile u8 *)ptr;
352: case 2: return *(const volatile u16 *)ptr;
353: case 4: return *(const volatile u32 *)ptr;
354: case 8: return *(const volatile u64 *)ptr;
355: default: return 0; /* Ignore; we do not diff the values. */
356: }
357: }
358:
359: void kcsan_save_irqtrace(struct task_struct *task)
360: {
361: #ifdef CONFIG_TRACE_IRQFLAGS
362: task->kcsan_save_irqtrace = task->irqtrace;
363: #endif
364: }
365:
366: void kcsan_restore_irqtrace(struct task_struct *task)
367: {
368: #ifdef CONFIG_TRACE_IRQFLAGS
369: task->irqtrace = task->kcsan_save_irqtrace;
]
|
| 61/2 |
2026/11/18 23:46 |
llm |
expert |
0m
Model:
Tokens:
input: 46784
output: 20
thoughts: 231
Thoughts: **My Analysis of the `udelay` Function and Interrupt Handling**
Okay, so I'm digging into this `delay_access` function. It's calling `udelay(delay)`, which is, of course, a busy-wait loop. No surprises there. The crucial part, though, is how it handles interrupts within that busy wait. Line 589 reveals something interesting. It looks like interrupts are *enabled* during the `udelay` if `interrupt_watcher` is set to true. My internal alarms are going off...
Hold on, I see that `interrupt_watcher` is initialized from `kcsan_interrupt_watcher` within `kcsan_setup_watchpoint`. So, if `kcsan_interrupt_watcher` is true, we could have an interrupt firing *during* `udelay`! This has some interesting implications regarding the context we're in, and in particular what `in_task()` is going to return.
Now, I'm thinking about the implications for `prepare_access_info`. Specifically, `.task_pid` gets set based on `in_task()`'s return value: if `in_task()` returns true (we're in a task), then we get the current task's PID. If it returns false, it's set to -1. But if an interrupt does fire, what's `in_task()` going to say? This could be a HARDIRQ or a SOFTIRQ. The crucial question is, does `in_task()` return false for *both* HARDIRQs and SOFTIRQs? If the former, it won't matter, but if the latter, we have a big problem.
Time to go check the definition of `in_task()` and see exactly how it works. That's going to tell me what's really happening.
|
| 62/2 |
2026/11/18 23:46 |
tool |
grepper |
0m
Args: map[Expression:#define in_task\(]
Results:
|
| 63/2 |
2026/11/18 23:46 |
llm |
expert |
0m
Model:
Tokens:
input: 47443
output: 32
thoughts: 20
Thoughts: Okay, here's my thought process summarized, geared towards an expert:
**Locating the `in_task` Macro**
Right, let's track down where `in_task` is defined. My intuition is telling me it's likely going to be in `include/linux/preempt.h`. That's the typical spot for anything related to preemption, context switching, and related kernel internals, so that's where I'll start looking. I'll need to confirm its exact definition and understand how it's used within that file.
|
| 64/2 |
2026/11/18 23:46 |
tool |
grepper |
0m
Args: map[Expression:in_task PathPrefixes:[include/linux/preempt.h]]
Results: map[Output:include/linux/preempt.h=118=static __always_inline unsigned char interrupt_context_level(void)
--
include/linux/preempt.h-151- * in_serving_softirq() - We're in softirq context
include/linux/preempt.h:152: * in_task() - We're in task context
include/linux/preempt.h-153- */
--
include/linux/preempt.h-157-#ifdef CONFIG_PREEMPT_RT
include/linux/preempt.h:158:# define in_task() (!((preempt_count() & (NMI_MASK | HARDIRQ_MASK)) | in_serving_softirq()))
include/linux/preempt.h-159-#else
include/linux/preempt.h:160:# define in_task() (!(preempt_count() & (NMI_MASK | HARDIRQ_MASK | SOFTIRQ_OFFSET)))
include/linux/preempt.h-161-#endif
]
|
| 65/2 |
2026/11/18 23:46 |
llm |
expert |
0m
Model:
Tokens:
input: 47879
output: 34
thoughts: 998
Thoughts: **Deep Dive into a KCSAN Report: Dissecting a Concurrency Issue**
Okay, let's break this down. First, the core of the matter: we're looking at a KCSAN (Kernel Concurrency Sanitizer) report, and it's pointing to a read by task 3283 on CPU 1. I need to figure out *why* this is happening and what the actual race condition is.
My initial thought, looking at the code, is `# define in_task() (!(preempt_count() & (NMI_MASK | HARDIRQ_MASK | SOFTIRQ_OFFSET)))`. I immediately question what happens if `preempt_count()` *doesn't* have those masks set. That's the crux of this.
Then, there's the question: why is this task on this CPU even doing a read? Could 3283 have been preempted? It's key. And *could* a `udelay()` call be preempted? No, unless `cond_resched()`? But `udelay` doesn't call it, so what's going on? *This is the critical line of inquiry.*
What if CPU 1 was interrupted by an interrupt? But *what kind of context*? Is it a perf event? A tracepoint? An eBPF program attached to either? This line of thinking is key. I need to know where this read is happening. In a perf event, ftrace, eBPF, BPF trace, does `preempt_count()` have any of those masks set? *Crucially*, is a tracepoint, perf event, or kprobe running in task context?
Consider this: when a perf event fires, like a timer or sampling event, or when `current->flags` is read, *what's the context*? I need to understand what parts of the kernel are reading `current->flags` or `task->flags`. I need to figure out what could read `current->flags` and why. The read was from *another* task or thread? That opens up a whole new can of worms!
The report states: `"read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:"`. Why is that specifically printed? Did *this* task consume the watchpoint? I need to reread `kernel/kcsan/report.c`. The `prepare_report_producer` function seems important here: `static void prepare_report_producer(unsigned long *flags, ...)` This looks like it prepares the report. Where is `ai` initialized?
Ah, `kcsan_found_watchpoint` calls `kcsan_report_set_info`, and that eventually calls `prepare_access_info`.
Okay, if `in_task()` is true on CPU 1, `current` *is* task 3283, so `task_pid_nr(current)` is 3283, and `cpu_id` is 1! That makes sense now. I can map what's happening.
But, why would `num_stack_entries` be zero, or why would `other_frame` be `0x0`? *That's a key clue.* Look at `ip`. Where does `ip` come from in `kcsan_found_watchpoint`? I need to find where `check_access` / `kcsan_check_access` is called and what `ip` it passes. Time to grep the `kernel/kcsan/` directory!
|
| 66/2 |
2026/11/18 23:46 |
tool |
grepper |
0m
Args: map[Expression:kcsan_found_watchpoint PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=419=set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
--
kernel/kcsan/core.c-447- *
kernel/kcsan/core.c:448: * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
kernel/kcsan/core.c-449- * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
--
kernel/kcsan/core.c-455-
kernel/kcsan/core.c:456:static noinline void kcsan_found_watchpoint(const volatile void *ptr,
kernel/kcsan/core.c-457- size_t size,
--
kernel/kcsan/core.c=728=check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-756- if (unlikely(watchpoint != NULL))
kernel/kcsan/core.c:757: kcsan_found_watchpoint(ptr, size, type, ip, watchpoint, encoded_watchpoint);
kernel/kcsan/core.c-758- else {
]
|
| 67/2 |
2026/11/18 23:46 |
llm |
expert |
0m
Model:
Tokens:
input: 50040
output: 37
thoughts: 33
Thoughts: Here's my analysis of the provided text, rendered as a first-person expert summary:
**Diving into `check_access` and KCSAN's Core**
Okay, so we're focusing in on `check_access` β likely a critical function in KCSAN for memory access validation. I need to understand its behavior. Let's pinpoint where the real magic happens and get a grasp of how it functions. My immediate thought is to examine its implementation, specifically lines 710 to 800 within `kernel/kcsan/core.c`. This snippet is almost certainly the heart of how KCSAN detects data races and memory errors. This is where I'll probably find the key logic for tracking accessed memory regions, checking for concurrent access patterns, and raising any flags if something is amiss. I'm expecting to see things like instrumentation of memory accesses, perhaps using shadow memory, and comparison of access patterns to detect potential data races. Let's see what gems are hidden in this section...
|
| 68/2 |
2026/11/18 23:46 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:710 LineCount:80]
Results: map[Contents: 710: raw_cpu_ptr(&kcsan_cpu_ctx)->disable_count--;
711: local_irq_restore(irq_flags);
712: }
713: kcsan_restore_irqtrace(current);
714: ctx->disable_scoped--;
715:
716: /*
717: * Reordered accesses cannot be used for value change detection,
718: * therefore never consider for reordering if access_mask is set.
719: * ASSERT_EXCLUSIVE are not real accesses, ignore them as well.
720: */
721: if (!access_mask && !is_assert)
722: set_reorder_access(ctx, ptr, size, type, ip);
723: out:
724: user_access_restore(ua_flags);
725: }
726:
727: static __always_inline void
728: check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
729: {
730: atomic_long_t *watchpoint;
731: long encoded_watchpoint;
732:
733: /*
734: * Do nothing for 0 sized check; this comparison will be optimized out
735: * for constant sized instrumentation (__tsan_{read,write}N).
736: */
737: if (unlikely(size == 0))
738: return;
739:
740: again:
741: /*
742: * Avoid user_access_save in fast-path: find_watchpoint is safe without
743: * user_access_save, as the address that ptr points to is only used to
744: * check if a watchpoint exists; ptr is never dereferenced.
745: */
746: watchpoint = find_watchpoint((unsigned long)ptr, size,
747: !(type & KCSAN_ACCESS_WRITE),
748: &encoded_watchpoint);
749: /*
750: * It is safe to check kcsan_is_enabled() after find_watchpoint in the
751: * slow-path, as long as no state changes that cause a race to be
752: * detected and reported have occurred until kcsan_is_enabled() is
753: * checked.
754: */
755:
756: if (unlikely(watchpoint != NULL))
757: kcsan_found_watchpoint(ptr, size, type, ip, watchpoint, encoded_watchpoint);
758: else {
759: struct kcsan_ctx *ctx = get_ctx(); /* Call only once in fast-path. */
760:
761: if (unlikely(should_watch(ctx, ptr, size, type))) {
762: kcsan_setup_watchpoint(ptr, size, type, ip);
763: return;
764: }
765:
766: if (!(type & KCSAN_ACCESS_SCOPED)) {
767: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
768:
769: if (reorder_access) {
770: /*
771: * reorder_access check: simulates reordering of
772: * the access after subsequent operations.
773: */
774: ptr = reorder_access->ptr;
775: type = reorder_access->type;
776: ip = reorder_access->ip;
777: /*
778: * Upon a nested interrupt, this context's
779: * reorder_access can be modified (shared ctx).
780: * We know that upon return, reorder_access is
781: * always invalidated by setting size to 0 via
782: * __tsan_func_exit(). Therefore we must read
783: * and check size after the other fields.
784: */
785: barrier();
786: size = READ_ONCE(reorder_access->size);
787: if (size)
788: goto again;
789: }
]
|
| 69/2 |
2026/11/18 23:46 |
llm |
expert |
0m
Model:
Tokens:
input: 51550
output: 41
thoughts: 478
Thoughts: **KCSAN Weak Memory Simulation Deep Dive**
Okay, so I'm diving into this KCSAN code and immediately, lines 766-789 jump out at me. This is where the magic happens β the weak memory simulation, the reordering! I see this `reorder_access` structure being used, and I need to understand it better. What exactly is this `reorder_access`? Ah, right, it's tied to `kcsan_weak_memory`.
So, an access happens, and `set_reorder_access(ctx, ptr, size, type, ip)` is called. This sets up the `reorder_access` data within the context, specifically `current->kcsan_ctx`. Later, *during a subsequent operation*, KCSAN simulates the *reordering* of this access. Intriguing! It's like a controlled experiment in memory model behavior.
But here's a wrinkle: what if the *reordered* access itself is checked? That's when I need to explore more. I remember `kcsan_setup_watchpoint` and recall `is_reorder_access = find_reorder_access(ctx, ptr, size, type, ip)` on line 571, and then on line 721 I see something interesting! `if (!access_mask && !is_assert) set_reorder_access(ctx, ptr, size, type, ip);`.
This leads me to `kernel/kcsan/report.c`. I have a hunch that I might find some clues in this code. It's making me wonder: What are the conditions that trigger this simulation? I have some questions now... What if a watchpoint was hit by an access? What if `stack_trace_save` returned 0? I need to know why `frame1` was equal to `0x0`. That's not normal.
Time to search the git log for reports with `0x0`... and a grep or git log on `kernel/kcsan/`, and definitely in commit messages, to find out what's going on!
|
| 70/2 |
2026/11/18 23:47 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[stack 0x0] PathPrefixes:[kernel/kcsan]]
Results: map[Output:7620a997e485 xen/gntdev: fix deadlock between map ioctl and mmap
ade63af6cfb7 x86/nmi: Ignore negative NMI handler durations
8ab6980c7007 cgroup/freezer: walk exiting tasks in the v1 freezer
a25c02af29c3 ocfs2: wait for filecheck kobject release after a failed add
126429e2f503 ocfs2: stop recovery before shutting down local allocators
5bdef466851e ocfs2: keep locking_state within the cluster connection lifetime
dd94d8c7660a mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg
740128dd1a3f mm: make swapoff interruptible when unusing mms/shmem
ec274bb4665c bpf: One may_goto time slice per prog invocation
9ff737119177 Bluetooth: hci_sync: Copy the resolving-list IRK under RCU
]
|
| 71/2 |
2026/11/18 23:47 |
llm |
expert |
0m
Model:
Tokens:
input: 52812
output: 29
thoughts: 17
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Decoding the "Data-Race in 0x0" Puzzle**
Alright, that phrase "data-race in 0x0" just pinged my radar. My immediate thought is, let's dive into some commit messages. This specific phrase is like a flag waving to potential concurrency bugs. "Data-race" is a big red flag in any concurrent or multi-threaded system. The "0x0" is crucial; it's practically screaming about an issue that's probably related to some fundamental memory location or an uninitialized pointer.
My experience tells me this could be a classic race condition, likely within a critical section that wasn't adequately protected. The "0x0" strongly implies an issue with initialization or an attempt to dereference a null or uninitialized pointer within that critical section, leading to unpredictable behavior or a crash. I'm already anticipating the typical suspects: incorrect mutex usage, missed atomic operations, improper memory barriers, or even a subtle bug in a shared data structure. My mental checklist kicks in: how are locks handled? What's the thread-safety policy of this module or the code surrounding it? Is there any inter-thread communication or shared state at play?
I'm ready to dissect the commit messages for clues. I'm looking for context β what was the surrounding code? What changes were being made, and what part of the application was affected? I'm anticipating the cause to be a synchronization error or potentially a more complex memory management issue. I need to understand how the code was intended to work and how it could have gone wrong.
|
| 72/2 |
2026/11/18 23:47 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[data-race in 0x0]]
Results:
|
| 73/2 |
2026/11/18 23:47 |
llm |
expert |
0m
Model:
Tokens:
input: 53228
output: 25
thoughts: 22
Thoughts: Here's my thought process, summarized as you requested:
**Searching for Elevated Privilege Indicators in Commit History**
Okay, so I need to get a handle on how privilege escalation might be implemented in this codebase. My immediate thought is to look for explicit mentions of "PF_SUPERPRIV" or the usage pattern `flags |= PF_SUPERPRIV` in the commit history. That's a pretty standard approach, and a good first step. These keywords are often used to designate or set a super-user, root-level, privileged state, so they should be excellent search terms. It's a targeted, yet relatively broad, way to potentially discover code which may have vulnerabilities. I'll need to use my preferred search tools, likely `git grep` or a similar utility, to efficiently scan the commit messages and source code for these indicators. The goal is to quickly identify commits where these mentions appear, which could potentially expose areas for deeper scrutiny.
|
| 74/2 |
2026/11/18 23:47 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[PF_SUPERPRIV]]
Results: map[Output:fb14528e4436 seccomp: Set PF_SUPERPRIV when checking capability
cf23705244c9 ptrace: Set PF_SUPERPRIV when checking capability
cc658db47d68 fs: Reorder inode_owner_or_capable() to avoid needless
25b68a8f0ab1 timerfd: Only check CAP_WAKE_ALARM when it is needed
38bf1953987c connector/userns: replace netlink uses of cap_raised() with capable()
]
|
| 75/2 |
2026/11/18 23:47 |
llm |
expert |
0m
Model:
Tokens:
input: 53614
output: 25
thoughts: 47
Thoughts: Okay, let's dive into this. I need to get a handle on the evolution of this section of the codebase.
**Analyzing Commit History**
My initial move is to examine commits `cf23705244c9`, `fb14528e4436`, and `cc658db47d68`. I'm going to leverage `git-show` to get a direct view of the changes introduced by each. This command is perfect for rapidly understanding the diffs, commit messages, and author information, allowing me to build a timeline of the modifications made. This targeted investigation will provide the precise context I need to proceed with my work.
|
| 76/2 |
2026/11/18 23:48 |
tool |
git-show |
0m
Args:
Results: map[Output:commit cc658db47d6897a8571fb6227f59d1d18151b0b2
Author: Kees Cook <kees@kernel.org>
Date: Wed Jun 21 09:53:06 2017 -0700
fs: Reorder inode_owner_or_capable() to avoid needless
Checking for capabilities should be the last operation when performing
access control tests so that PF_SUPERPRIV is set only when it was required
for success (implying that the capability was needed for the operation).
Reported-by: Solar Designer <solar@openwall.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
diff --git a/fs/inode.c b/fs/inode.c
index db5914783a71..7092debe90cc 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -2023,7 +2023,7 @@ bool inode_owner_or_capable(const struct inode *inode)
return true;
ns = current_user_ns();
- if (ns_capable(ns, CAP_FOWNER) && kuid_has_mapping(ns, inode->i_uid))
+ if (kuid_has_mapping(ns, inode->i_uid) && ns_capable(ns, CAP_FOWNER))
return true;
return false;
}
diff --git a/fs/namei.c b/fs/namei.c
index 6571a5f5112e..efe53a5d0737 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1008,7 +1008,7 @@ static int may_linkat(struct path *link)
/* Source inode owner (or CAP_FOWNER) can hardlink all they like,
* otherwise, it must be a safe source.
*/
- if (inode_owner_or_capable(inode) || safe_hardlink_source(inode))
+ if (safe_hardlink_source(inode) || inode_owner_or_capable(inode))
return 0;
audit_log_link_denied("linkat", link);
]
|
| 77/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 54506
output: 26
thoughts: 29
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Analyzing Commits: A Quick Glance**
Alright, let's take a quick look at commit `cf23705244c9` and `fb14528e4436`. Just by the commit hashes, I can already start to infer some things. Given the current state of this project, I'm already formulating some hypotheses about these commits. Is it a bug fix? Feature implementation? Code refactor?
Without more context, it's difficult to say for certain. But, a quick examination is in order. My initial expectation is a fairly discrete change, based on the size of the commit ID.
|
| 78/2 |
2026/11/18 23:48 |
tool |
git-show |
0m
Args:
Results: map[Output:commit cf23705244c947151179f929774fabf71e239eee
Author: MickaΓ«l SalaΓΌn <mic@digikod.net>
Date: Fri Oct 30 13:38:48 2020 +0100
ptrace: Set PF_SUPERPRIV when checking capability
Commit 69f594a38967 ("ptrace: do not audit capability check when outputing
/proc/pid/stat") replaced the use of ns_capable() with
has_ns_capability{,_noaudit}() which doesn't set PF_SUPERPRIV.
Commit 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in
ptrace_has_cap()") replaced has_ns_capability{,_noaudit}() with
security_capable(), which doesn't set PF_SUPERPRIV neither.
Since commit 98f368e9e263 ("kernel: Add noaudit variant of ns_capable()"), a
new ns_capable_noaudit() helper is available. Let's use it!
As a result, the signature of ptrace_has_cap() is restored to its original one.
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: stable@vger.kernel.org
Fixes: 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()")
Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: MickaΓ«l SalaΓΌn <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-2-mic@digikod.net
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 43d6179508d6..79de1294f8eb 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -264,17 +264,11 @@ static int ptrace_check_attach(struct task_struct *child, bool ignore_state)
return ret;
}
-static bool ptrace_has_cap(const struct cred *cred, struct user_namespace *ns,
- unsigned int mode)
+static bool ptrace_has_cap(struct user_namespace *ns, unsigned int mode)
{
- int ret;
-
if (mode & PTRACE_MODE_NOAUDIT)
- ret = security_capable(cred, ns, CAP_SYS_PTRACE, CAP_OPT_NOAUDIT);
- else
- ret = security_capable(cred, ns, CAP_SYS_PTRACE, CAP_OPT_NONE);
-
- return ret == 0;
+ return ns_capable_noaudit(ns, CAP_SYS_PTRACE);
+ return ns_capable(ns, CAP_SYS_PTRACE);
}
/* Returns 0 on success, -errno on denial. */
@@ -326,7 +320,7 @@ static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
gid_eq(caller_gid, tcred->sgid) &&
gid_eq(caller_gid, tcred->gid))
goto ok;
- if (ptrace_has_cap(cred, tcred->user_ns, mode))
+ if (ptrace_has_cap(tcred->user_ns, mode))
goto ok;
rcu_read_unlock();
return -EPERM;
@@ -345,7 +339,7 @@ static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
mm = task->mm;
if (mm &&
((get_dumpable(mm) != SUID_DUMP_USER) &&
- !ptrace_has_cap(cred, mm->user_ns, mode)))
+ !ptrace_has_cap(mm->user_ns, mode)))
return -EPERM;
return security_ptrace_access_check(task, mode);
]
|
| 79/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 55967
output: 18
thoughts: 25
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Investigating PF_SUPERPRIV**
Okay, so I've come across `PF_SUPERPRIV`, and the first question that pops into my head is, "What precisely does this flag represent? What is its intended function within the kernel?" I need to understand its semantics. I immediately start thinking about how it might be used within the kernel.
Given this is a kernel-level construct, my next step is clear: I need to dive into the source code. I'll search for every instance of `PF_SUPERPRIV` within the kernel's codebase. That's the only way to get a solid grasp of its purpose, the contexts where it's set/cleared, and, crucially, how it affects system behavior. I'll be looking for cross-references, definitions, and, if I'm lucky, some comments that shed light on its rationale. I'll pay close attention to the data structures associated with `PF_SUPERPRIV` and functions using it. I need to understand this flag, how it works in practice, and what security implications might be involved.
|
| 80/2 |
2026/11/18 23:48 |
tool |
grepper |
0m
Args: map[Expression:PF_SUPERPRIV]
Results: map[Output:include/linux/sched.h=1798=extern struct pid __rcu *cad_pid;
--
include/linux/sched.h-1810-#define PF_MCE_PROCESS 0x00000080 /* Process policy on mce errors */
include/linux/sched.h:1811:#define PF_SUPERPRIV 0x00000100 /* Used super-user privileges */
include/linux/sched.h-1812-#define PF_DUMPCORE 0x00000200 /* Dumped core */
--
kernel/acct.c=557=void acct_collect(long exitcode, int group_dead)
--
kernel/acct.c-581- }
kernel/acct.c:582: if (current->flags & PF_SUPERPRIV)
kernel/acct.c-583- pacct->ac_flag |= ASU;
--
kernel/capability.c=216=SYSCALL_DEFINE2(capset, cap_user_header_t, header, const cap_user_data_t, data)
--
kernel/capability.c-273- *
kernel/capability.c:274: * Note that this does not set PF_SUPERPRIV on the task.
kernel/capability.c-275- */
kernel/capability.c=276=bool has_ns_capability(struct task_struct *t,
--
kernel/capability.c-298- *
kernel/capability.c:299: * Note that this does not set PF_SUPERPRIV on the task.
kernel/capability.c-300- */
kernel/capability.c=301=bool has_ns_capability_noaudit(struct task_struct *t,
--
kernel/capability.c-322- *
kernel/capability.c:323: * Note that this does not set PF_SUPERPRIV on the task.
kernel/capability.c-324- */
--
kernel/capability.c=330=static bool ns_capable_common(struct user_namespace *ns,
--
kernel/capability.c-342- if (capable == 0) {
kernel/capability.c:343: current->flags |= PF_SUPERPRIV;
kernel/capability.c-344- return true;
--
kernel/capability.c-356- *
kernel/capability.c:357: * This sets PF_SUPERPRIV on the task if the capability is available on the
kernel/capability.c-358- * assumption that it's about to be used.
--
kernel/capability.c=364=EXPORT_SYMBOL(ns_capable);
--
kernel/capability.c-374- *
kernel/capability.c:375: * This sets PF_SUPERPRIV on the task if the capability is available on the
kernel/capability.c-376- * assumption that it's about to be used.
--
kernel/capability.c=382=EXPORT_SYMBOL(ns_capable_noaudit);
--
kernel/capability.c-393- *
kernel/capability.c:394: * This sets PF_SUPERPRIV on the task if the capability is available on the
kernel/capability.c-395- * assumption that it's about to be used.
--
kernel/capability.c=401=EXPORT_SYMBOL(ns_capable_setid);
--
kernel/capability.c-409- *
kernel/capability.c:410: * This sets PF_SUPERPRIV on the task if the capability is available on the
kernel/capability.c-411- * assumption that it's about to be used.
--
kernel/capability.c=417=EXPORT_SYMBOL(capable);
--
kernel/capability.c-427- *
kernel/capability.c:428: * This sets PF_SUPERPRIV on the task if the capability is available on the
kernel/capability.c-429- * assumption that it's about to be used.
--
kernel/capability.c=435=EXPORT_SYMBOL(capable_noaudit);
--
kernel/capability.c-446- *
kernel/capability.c:447: * This does not set PF_SUPERPRIV because the caller may not
kernel/capability.c-448- * actually be privileged.
--
kernel/fork.c=2029=__latent_entropy struct task_struct *copy_process(
--
kernel/fork.c-2209- delayacct_tsk_init(p); /* Must remain after dup_task_struct() */
kernel/fork.c:2210: p->flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER | PF_IDLE | PF_NO_SETAFFINITY);
kernel/fork.c-2211- p->flags |= PF_FORKNOEXEC;
--
kernel/tsacct.c=20=void bacct_add_tsk(struct user_namespace *user_ns,
--
kernel/tsacct.c-51- stats->ac_flag |= AFORK;
kernel/tsacct.c:52: if (tsk->flags & PF_SUPERPRIV)
kernel/tsacct.c-53- stats->ac_flag |= ASU;
--
security/commoncap.c=1469=int cap_mmap_addr(unsigned long addr)
--
security/commoncap.c-1475- CAP_OPT_NONE);
security/commoncap.c:1476: /* set PF_SUPERPRIV if it turns out we allow the low mmap */
security/commoncap.c-1477- if (ret == 0)
security/commoncap.c:1478: current->flags |= PF_SUPERPRIV;
security/commoncap.c-1479- }
]
|
| 81/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 57700
output: 35
thoughts: 1648
Thoughts: **KCSAN Report Investigation**
Okay, so `PF_SUPERPRIV` seems to only be relevant for BSD process and taskstats accounting. But let me quickly double-check the code in `kernel/acct.c` and `kernel/tsacct.c` just to be sure. Yep, there it is: `if (current->flags & PF_SUPERPRIV)` and `if (tsk->flags & PF_SUPERPRIV)`. Now, who else might be reading or writing to the `flags` field of `task_struct`? That's the real question.
Alright, what about this KCSAN report? Let's take another look. Hmm, "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid." And then it says "read to ... " and then "read-write ... ". But wait, what's with the "0x0"? And the *completely* empty stack trace for the initial read? That's... odd.
I need to understand what "data-race in 0x0 / ..." means in KCSAN. Why would the initial stack trace be empty and have a function pointer value of 0x0? Let's figure out how `other_info` gets populated. Could this be related to an interrupt, or something without a valid stack? Or how does `stack_trace_save` return 0, resulting in the empty stack?
Let's look at where `stack_trace_save` is called, specifically in `kernel/kcsan/report.c`: `other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);` Okay, when does `stack_trace_save` return 0? Or maybe `other_info` was populated, but... Could `other_info` be populated by something else? I should check `kcsan_report_unknown_origin` versus `kcsan_report_known_origin`.
Okay, in `kcsan_report_unknown_origin`, the `other_info` is `NULL`. In that case, the error message reads "BUG: KCSAN: data-race in this_frame". And crucially, it *doesn't* include the "read to ..." lines! It just says "read-write...". But our report DOES include the "read to..." access information.
So, in *our* report, `other_info` is NOT NULL! The KCSAN report *does* say "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid" AND it shows both accesses: a "read to ..." AND "read-write...". The `other_info` *was* populated! And it looks like the `other_info` data is: `ai.access_type` is 0 (which would be a read), and the address/size/task/cpu are populated, but `ai.ip` and `num_stack_entries` are 0.
So the `ip` is 0 and the stack entries are empty, which means something is not working as expected. Let's trace calls to either `kcsan_found_watchpoint` or `kcsan_report_set_info`! Time to search for all callers of `kcsan_found_watchpoint` and `kcsan_report_set_info`.
|
| 82/2 |
2026/11/18 23:48 |
tool |
grepper |
0m
Args: map[Expression:kcsan_report_set_info PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=456=static noinline void kcsan_found_watchpoint(const volatile void *ptr,
--
kernel/kcsan/core.c-507- kcsan_save_irqtrace(current);
kernel/kcsan/core.c:508: kcsan_report_set_info(ptr, size, type, ip, watchpoint - watchpoints);
kernel/kcsan/core.c-509- kcsan_restore_irqtrace(current);
--
kernel/kcsan/kcsan.h=101=enum kcsan_value_change {
--
kernel/kcsan/kcsan.h-122- */
kernel/kcsan/kcsan.h:123:void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
kernel/kcsan/kcsan.h-124- unsigned long ip, int watchpoint_idx);
--
kernel/kcsan/report.c=642=static struct access_info prepare_access_info(const volatile void *ptr, size_t size,
--
kernel/kcsan/report.c-655-
kernel/kcsan/report.c:656:void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
kernel/kcsan/report.c-657- unsigned long ip, int watchpoint_idx)
]
|
| 83/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 60538
output: 34
thoughts: 52
Thoughts: Here's my analysis of the situation:
**Investigating a Kernel Concurrency Sanitizer (KCSan) Issue**
Okay, it seems the problem is isolated to a specific line in `kernel/kcsan/core.c:508`. That narrows things down considerably β good! Now, the crucial question is: *what* is happening at that line and, more importantly, *why*? To understand the root cause, I need to trace the execution path that leads to this point. The key function here is `kcsan_found_watchpoint`. I need to figure out how `kcsan_found_watchpoint` is being called. So, the next logical step is to analyze all the callers of this function. I'll need to meticulously examine each call site to build a mental picture of the context and the data being passed in. This should provide the information I need to understand why the watchpoint is being triggered and develop a plan to address the issue.
|
| 84/2 |
2026/11/18 23:48 |
tool |
grepper |
0m
Args: map[Expression:kcsan_found_watchpoint PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=419=set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
--
kernel/kcsan/core.c-447- *
kernel/kcsan/core.c:448: * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
kernel/kcsan/core.c-449- * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
--
kernel/kcsan/core.c-455-
kernel/kcsan/core.c:456:static noinline void kcsan_found_watchpoint(const volatile void *ptr,
kernel/kcsan/core.c-457- size_t size,
--
kernel/kcsan/core.c=728=check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-756- if (unlikely(watchpoint != NULL))
kernel/kcsan/core.c:757: kcsan_found_watchpoint(ptr, size, type, ip, watchpoint, encoded_watchpoint);
kernel/kcsan/core.c-758- else {
]
|
| 85/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 61181
output: 30
thoughts: 56
Thoughts: Okay, here's my summary, considering my expertise:
**Diving Deep into the Access Check Mechanism**
Alright, I'm focusing my attention. I know the core access control logic is isolated within `check_access`. I need to understand how this function is integrated into the memory model. My immediate questions are: What triggers `check_access`? Where does the control flow originate? Let's trace it. It seems to be called by functions like `__tsan_read*`, `__tsan_write*`, and related variants. Those names definitely point to the ThreadSanitizer instrumentation. Iβm thinking those are the entry points where memory accesses are intercepted and analyzed. Now, I need to see the *calling* context to understand the broader architecture and how the checks are invoked. I'll search the code for all calls to `check_access` to fully grasp its role in the system. I anticipate this will shed light on how data races and memory errors are detected.
|
| 86/2 |
2026/11/18 23:48 |
tool |
grepper |
0m
Args: map[Expression:check_access\( PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=209=static __always_inline void
kernel/kcsan/core.c:210:check_access(const volatile void *ptr, size_t size, int type, unsigned long ip);
kernel/kcsan/core.c-211-
--
kernel/kcsan/core.c=213=static noinline void kcsan_check_scoped_accesses(void)
--
kernel/kcsan/core.c-222- list_for_each_entry(scoped_access, &ctx->scoped_accesses, list) {
kernel/kcsan/core.c:223: check_access(scoped_access->ptr, scoped_access->size,
kernel/kcsan/core.c-224- scoped_access->type, scoped_access->ip);
--
kernel/kcsan/core.c=419=set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
--
kernel/kcsan/core.c-443-/*
kernel/kcsan/core.c:444: * Pull everything together: check_access() below contains the performance
kernel/kcsan/core.c-445- * critical operations; the fast-path (including check_access) functions should
--
kernel/kcsan/core.c=727=static __always_inline void
kernel/kcsan/core.c:728:check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
kernel/kcsan/core.c-729-{
--
kernel/kcsan/core.c=916=kcsan_begin_scoped_access(const volatile void *ptr, size_t size, int type,
--
kernel/kcsan/core.c-920-
kernel/kcsan/core.c:921: check_access(ptr, size, type, _RET_IP_);
kernel/kcsan/core.c-922-
--
kernel/kcsan/core.c=940=void kcsan_end_scoped_access(struct kcsan_scoped_access *sa)
--
kernel/kcsan/core.c-960-
kernel/kcsan/core.c:961: check_access(sa->ptr, sa->size, sa->type, sa->ip);
kernel/kcsan/core.c-962-}
kernel/kcsan/core.c=963=EXPORT_SYMBOL(kcsan_end_scoped_access);
kernel/kcsan/core.c-964-
kernel/kcsan/core.c:965:void __kcsan_check_access(const volatile void *ptr, size_t size, int type)
kernel/kcsan/core.c-966-{
kernel/kcsan/core.c:967: check_access(ptr, size, type, _RET_IP_);
kernel/kcsan/core.c-968-}
--
kernel/kcsan/core.c=985=DEFINE_MEMORY_BARRIER(release, true);
--
kernel/kcsan/core.c-1003- { \
kernel/kcsan/core.c:1004: check_access(ptr, size, 0, _RET_IP_); \
kernel/kcsan/core.c-1005- } \
--
kernel/kcsan/core.c-1012- { \
kernel/kcsan/core.c:1013: check_access(ptr, size, KCSAN_ACCESS_WRITE, _RET_IP_); \
kernel/kcsan/core.c-1014- } \
--
kernel/kcsan/core.c-1021- { \
kernel/kcsan/core.c:1022: check_access(ptr, size, \
kernel/kcsan/core.c-1023- KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE, \
--
kernel/kcsan/core.c=1038=void __tsan_read_range(void *ptr, size_t size)
kernel/kcsan/core.c-1039-{
kernel/kcsan/core.c:1040: check_access(ptr, size, 0, _RET_IP_);
kernel/kcsan/core.c-1041-}
--
kernel/kcsan/core.c=1045=void __tsan_write_range(void *ptr, size_t size)
kernel/kcsan/core.c-1046-{
kernel/kcsan/core.c:1047: check_access(ptr, size, KCSAN_ACCESS_WRITE, _RET_IP_);
kernel/kcsan/core.c-1048-}
kernel/kcsan/core.c=1049=EXPORT_SYMBOL(__tsan_write_range);
--
kernel/kcsan/core.c-1067- return; \
kernel/kcsan/core.c:1068: check_access(ptr, size, is_atomic ? KCSAN_ACCESS_ATOMIC : 0, \
kernel/kcsan/core.c-1069- _RET_IP_); \
--
kernel/kcsan/core.c-1081- return; \
kernel/kcsan/core.c:1082: check_access(ptr, size, \
kernel/kcsan/core.c-1083- KCSAN_ACCESS_WRITE | \
--
kernel/kcsan/core.c=1120=noinline void __tsan_func_exit(void)
--
kernel/kcsan/core.c-1138- */
kernel/kcsan/core.c:1139: check_access(reorder_access->ptr, reorder_access->size,
kernel/kcsan/core.c-1140- reorder_access->type, reorder_access->ip);
--
kernel/kcsan/core.c=1171=static __always_inline void kcsan_atomic_builtin_memorder(int memorder)
--
kernel/kcsan/core.c-1184- if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
kernel/kcsan/core.c:1185: check_access(ptr, bits / BITS_PER_BYTE, KCSAN_ACCESS_ATOMIC, _RET_IP_); \
kernel/kcsan/core.c-1186- } \
--
kernel/kcsan/core.c-1194- if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
kernel/kcsan/core.c:1195: check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c-1196- KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC, _RET_IP_); \
--
kernel/kcsan/core.c-1207- if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
kernel/kcsan/core.c:1208: check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c-1209- KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
--
kernel/kcsan/core.c-1217- * Note: CAS operations are always classified as write, even in case they
kernel/kcsan/core.c:1218: * fail. We cannot perform check_access() after a write, as it might lead to
kernel/kcsan/core.c-1219- * false positives, in cases such as:
--
kernel/kcsan/core.c-1240- if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
kernel/kcsan/core.c:1241: check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c-1242- KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
--
kernel/kcsan/core.c-1256- if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
kernel/kcsan/core.c:1257: check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c-1258- KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
--
kernel/kcsan/core.c=1336=noinline void *__tsan_memset(void *s, int c, size_t count)
--
kernel/kcsan/core.c-1343-
kernel/kcsan/core.c:1344: check_access(s, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
kernel/kcsan/core.c-1345- return memset(s, c, count);
--
kernel/kcsan/core.c=1354=noinline void *__tsan_memmove(void *dst, const void *src, size_t len)
--
kernel/kcsan/core.c-1357-
kernel/kcsan/core.c:1358: check_access(dst, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
kernel/kcsan/core.c:1359: check_access(src, check_len, 0, _RET_IP_);
kernel/kcsan/core.c-1360- return memmove(dst, src, len);
--
kernel/kcsan/core.c=1369=noinline void *__tsan_memcpy(void *dst, const void *src, size_t len)
--
kernel/kcsan/core.c-1372-
kernel/kcsan/core.c:1373: check_access(dst, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
kernel/kcsan/core.c:1374: check_access(src, check_len, 0, _RET_IP_);
kernel/kcsan/core.c-1375- return memcpy(dst, src, len);
--
kernel/kcsan/debugfs.c=57=static noinline void microbenchmark(unsigned long iters)
--
kernel/kcsan/debugfs.c-77- (!(iters & 0xf) ? KCSAN_ACCESS_WRITE : 0);
kernel/kcsan/debugfs.c:78: __kcsan_check_access((void *)addr, sizeof(long), type);
kernel/kcsan/debugfs.c-79- }
--
kernel/kcsan/selftest.c=79=static bool __init test_matching_access(void)
--
kernel/kcsan/selftest.c-94- * Rather than add more comparisons to 'matching_access()', which would
kernel/kcsan/selftest.c:95: * end up in the fast-path for *all* checks, check_access() simply
kernel/kcsan/selftest.c-96- * returns for all accesses of size 0.
]
|
| 87/2 |
2026/11/18 23:48 |
llm |
expert |
0m
Model:
Tokens:
input: 64445
output: 38
thoughts: 60
Thoughts: Okay, let's dive into this.
**KCSAN's Exit Function**
Alright, I'm focusing on `kernel/kcsan/core.c` again. My eye is drawn to line 1120: `__tsan_func_exit`. That's where it happens, the function exit instrumentation. I need to get a clear picture of what's happening around there, so I'll scan the context. Let me examine lines 1120 through 1160 in that file to understand the surrounding code. This will definitely give me a better understanding of how KCSAN handles function exits from a thread.
|
| 88/2 |
2026/11/18 23:49 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:1120 LineCount:40]
Results: map[Contents:1120: noinline void __tsan_func_exit(void)
1121: {
1122: struct kcsan_scoped_access *reorder_access;
1123:
1124: if (!IS_ENABLED(CONFIG_KCSAN_WEAK_MEMORY))
1125: return;
1126:
1127: reorder_access = get_reorder_access(get_ctx());
1128: if (!reorder_access)
1129: goto out;
1130:
1131: if (get_kcsan_stack_depth() <= reorder_access->stack_depth) {
1132: /*
1133: * Access check to catch cases where write without a barrier
1134: * (supposed release) was last access in function: because
1135: * instrumentation is inserted before the real access, a data
1136: * race due to the write giving up a c-s would only be caught if
1137: * we do the conflicting access after.
1138: */
1139: check_access(reorder_access->ptr, reorder_access->size,
1140: reorder_access->type, reorder_access->ip);
1141: reorder_access->size = 0;
1142: reorder_access->stack_depth = INT_MIN;
1143: }
1144: out:
1145: add_kcsan_stack_depth(-1);
1146: }
1147: EXPORT_SYMBOL(__tsan_func_exit);
1148:
1149: void __tsan_init(void);
1150: void __tsan_init(void)
1151: {
1152: }
1153: EXPORT_SYMBOL(__tsan_init);
1154:
1155: /*
1156: * Instrumentation for atomic builtins (__atomic_*, __sync_*).
1157: *
1158: * Normal kernel code _should not_ be using them directly, but some
1159: * architectures may implement some or all atomics using the compilers'
]
|
| 89/2 |
2026/11/18 23:49 |
llm |
expert |
0m
Model:
Tokens:
input: 65291
output: 37
thoughts: 294
Thoughts: **KCSAN Reordering and Capability Checks**
Okay, let's dive into this `reorder_access` business. I need to understand this within the context of `kcsan_weak_memory` being enabled. Specifically, if a previous read was flagged as a `reorder_access`, I have to figure out *what* read it was. That's the key.
Hold on, I'm going to jump into `kernel/capability.c:495`. I see the `ns_capable(ns, cap) && privileged_wrt_inode_uidgid(ns, idmap, inode)` call. Now, before `current->flags |= PF_SUPERPRIV` gets set in `ns_capable_common`, I have to trace back... What read preceded this? Or, more broadly, what was going on with task 3283 that led to this? That's the real problem to be solved here.
And, why was the value read `0x0`? That feels important.
Okay, shifting gears... Let's look at `kernel/kcsan/report.c`. I'm going to look at `sanitize_stack_entries`. Specifically, `sanitize_stack_entries`'s call to `replace_stack_entry`.
Right, let me get a good look at that `replace_stack_entry` function in `kernel/kcsan/report.c`. That seems like the critical piece to understand.
|
| 90/2 |
2026/11/18 23:49 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:310 LineCount:40]
Results: map[Contents: 310: /*
311: * Skips to the first entry that matches the function of @ip, and then replaces
312: * that entry with @ip, returning the entries to skip with @replaced containing
313: * the replaced entry.
314: */
315: static int
316: replace_stack_entry(unsigned long stack_entries[], int num_entries, unsigned long ip,
317: unsigned long *replaced)
318: {
319: unsigned long symbolsize, offset;
320: unsigned long target_func;
321: int skip;
322:
323: if (kallsyms_lookup_size_offset(ip, &symbolsize, &offset))
324: target_func = ip - offset;
325: else
326: goto fallback;
327:
328: for (skip = 0; skip < num_entries; ++skip) {
329: unsigned long func = stack_entries[skip];
330:
331: if (!kallsyms_lookup_size_offset(func, &symbolsize, &offset))
332: goto fallback;
333: func -= offset;
334:
335: if (func == target_func) {
336: *replaced = stack_entries[skip];
337: stack_entries[skip] = ip;
338: return skip;
339: }
340: }
341:
342: fallback:
343: /* Should not happen; the resulting stack trace is likely misleading. */
344: WARN_ONCE(1, "Cannot find frame for %pS in stack trace", (void *)ip);
345: return get_stack_skipnr(stack_entries, num_entries);
346: }
347:
348: static int
349: sanitize_stack_entries(unsigned long stack_entries[], int num_entries, unsigned long ip,
]
|
| 91/2 |
2026/11/18 23:49 |
llm |
expert |
0m
Model:
Tokens:
input: 66521
output: 33
thoughts: 1127
Thoughts: **KCSAN Race Detection Analysis: A Deep Dive**
Okay, so I'm looking at this KCSAN report, and something's not adding up. The `other_info->num_stack_entries` being zero is immediately suspicious. Let's see... a quick check in `kernel/kcsan/report.c` shows `stack_trace_save` being called. Under what circumstances does *that* return zero? I need to understand that. Then, I remember `kcsan_found_watchpoint` and the logic there. The critical part is that a thread on *any* CPU can trigger this.
Wait, the report states there's a read access to `ptr` by the *same* task and on the *same* CPU as the write, so it can't be a context switch. It says "read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:". Okay, the memory address `0xffff888104b4116c` looks awfully familiar... that's the memory address of the task's `flags` member! That also means the task's `task_struct` is `0xffff888104b41000`. So, this comes back to the question: Can task 3283 race with *itself*? Impossible?
Let's break this down. The code shows task 3283 running on CPU 1 executes `current->flags |= PF_SUPERPRIV;` KCSAN intercepts this access, so it is a read-modify-write! Ah, in `kernel/capability.c:343`! Since KCSAN is configured for compound accesses, so the access is flagged as read-write, that implies a watchpoint is set on `¤t->flags`. While this watchpoint is active (during `delay_access(type)`), something else is accessing that memory.
This triggers something: A Hardware Interrupt (NMI)!
But wait, if a Hardware interrupt happens during `delay_access(type)`, will `in_task()` return true? Yes, but `in_task` is set `!(preempt_count() & (NMI_MASK | ...))`.
But, what could interrupt this? `preempt_count` is what we care about here.
What other operations are happening on CPU 1? Is it possible for task 3283 to be scheduled out during the `udelay` call?
The critical part of `delay_access` is `udelay(delay)`! Could `udelay` *itself* trigger something that accesses `current->flags`? What are the potential sources here? Perf events, tracepoints, timers, watchdogs... what about calls to other kernel functions that read the current task's flags?
The fact that the report says "task 3283 on cpu 1" is very helpful. If `in_task()` *returned* TRUE, then `task_pid` would be 3283, and `cpu_id` would be 1. So, *how* could another access happen with `in_task() == true` on CPU 1 while task 3283 is in `delay_access`? That's the crux of this.
This is the key. Is there something, *anything*, that `udelay` executes on x86_64 that might read `current->flags`? I need to check the assembly code of the `udelay` implementation or what it calls. I'm going to `grep` for `udelay` or `delay_tsc` on x86_64 to understand what's happening under the hood. I have to see what this is doing.
|
| 92/2 |
2026/11/18 23:49 |
tool |
grepper |
0m
Args: map[Expression:__udelay|delay_tsc PathPrefixes:[arch/x86]]
Results: map[Output:arch/x86/kvm/lapic.c=1958=static inline void __wait_lapic_expire(struct kvm_vcpu *vcpu, u64 guest_cycles)
--
arch/x86/kvm/lapic.c-1964- * convert the delay to nanoseconds to achieve an accurate delay. Note
arch/x86/kvm/lapic.c:1965: * that __delay() uses delay_tsc whenever the hardware has TSC, thus
arch/x86/kvm/lapic.c-1966- * always for VMX enabled hardware.
--
arch/x86/lib/delay.c=38=static void delay_loop(u64 __loops)
--
arch/x86/lib/delay.c-60-/* TSC based delay: */
arch/x86/lib/delay.c:61:static void delay_tsc(u64 cycles)
arch/x86/lib/delay.c-62-{
--
arch/x86/lib/delay.c=172=void __init use_tsc_delay(void)
--
arch/x86/lib/delay.c-174- if (delay_fn == delay_loop)
arch/x86/lib/delay.c:175: delay_fn = delay_tsc;
arch/x86/lib/delay.c-176-}
--
arch/x86/lib/delay.c=190=bool delay_read_timer(unsigned long *timer_val)
arch/x86/lib/delay.c-191-{
arch/x86/lib/delay.c:192: if (delay_fn == delay_tsc) {
arch/x86/lib/delay.c-193- *timer_val = rdtsc();
--
arch/x86/lib/delay.c=217=EXPORT_SYMBOL(__const_udelay);
arch/x86/lib/delay.c-218-
arch/x86/lib/delay.c:219:void __udelay(unsigned long usecs)
arch/x86/lib/delay.c-220-{
--
arch/x86/lib/delay.c-222-}
arch/x86/lib/delay.c:223:EXPORT_SYMBOL(__udelay);
arch/x86/lib/delay.c-224-
--
arch/x86/um/delay.c=45=EXPORT_SYMBOL(__const_udelay);
arch/x86/um/delay.c-46-
arch/x86/um/delay.c:47:void __udelay(unsigned long usecs)
arch/x86/um/delay.c-48-{
--
arch/x86/um/delay.c-50-}
arch/x86/um/delay.c:51:EXPORT_SYMBOL(__udelay);
arch/x86/um/delay.c-52-
]
|
| 93/2 |
2026/11/18 23:49 |
llm |
expert |
0m
Model:
Tokens:
input: 69269
output: 38
thoughts: 17
Thoughts: Okay, let's dive into this. Here's my take on what's going on, thinking through this `arch/x86/lib/delay.c` file:
**Analyzing the x86 Delay Implementation**
Alright, I see we're looking at the delay routines for x86 architecture. Given the file path, this is likely low-level stuff, crucial for precise timing in the kernel. My initial thought is, this is where we find the functions that provide the fundamental building blocks for anything that needs to wait a specific duration β think interrupts, timers, and even some spinlocks.
I immediately start to think about the challenges here. x86 has evolved so much, so how are they handling the different CPU clock speeds and the variations across different generations of processors? I'm betting there's some kind of calibration mechanism in here. We need delays, but those delays need to be accurate across a massive landscape of hardware. Probably leveraging the Time Stamp Counter (TSC), which is the most reliable way to measure time on x86, but even that's not perfect. It's susceptible to frequency changes, power management, and things like virtualization. So I'm expecting some mitigation strategies to account for those TSC variations and to fall back to other methods when TSC is unreliable.
I'm also curious about the specific implementation. Are we talking about busy-waiting loops? That's the simplest approach, but also the most wasteful of CPU cycles. I'd hope to see some kind of optimization, maybe using assembly language to get the most precise control over the instructions and to minimize overhead. I'm wondering if there are different delay functions based on the length of the delay required. Microseconds? Milliseconds? Longer delays likely mean different strategies are applied.
Furthermore, I have to remember that this is kernel code, so it's critical to be reentrant, which means that interrupt calls can't wreck the execution of this routine. Are there any lock mechanisms? Or are we relying on the architecture to keep it safe?
I'm ready to dig in and dissect the actual code to confirm my initial hypothesis. I expect to see calibration routines, TSC usage, maybe even fallback mechanisms, and hopefully some clever use of assembly language to minimize overhead. This is going to be interesting!
|
| 94/2 |
2026/11/18 23:50 |
tool |
read-file |
0m
Args: map[File:arch/x86/lib/delay.c FirstLine:60 LineCount:80]
Results: map[Contents: 60: /* TSC based delay: */
61: static void delay_tsc(u64 cycles)
62: {
63: u64 bclock, now;
64: int cpu;
65:
66: preempt_disable();
67: cpu = smp_processor_id();
68: bclock = rdtsc_ordered();
69: for (;;) {
70: now = rdtsc_ordered();
71: if ((now - bclock) >= cycles)
72: break;
73:
74: /* Allow RT tasks to run */
75: preempt_enable();
76: native_pause();
77: preempt_disable();
78:
79: /*
80: * It is possible that we moved to another CPU, and
81: * since TSC's are per-cpu we need to calculate
82: * that. The delay must guarantee that we wait "at
83: * least" the amount of time. Being moved to another
84: * CPU could make the wait longer but we just need to
85: * make sure we waited long enough. Rebalance the
86: * counter for this CPU.
87: */
88: if (unlikely(cpu != smp_processor_id())) {
89: cycles -= (now - bclock);
90: cpu = smp_processor_id();
91: bclock = rdtsc_ordered();
92: }
93: }
94: preempt_enable();
95: }
96:
97: /*
98: * On Intel the TPAUSE instruction waits until any of:
99: * 1) the TSC counter exceeds the value provided in EDX:EAX
100: * 2) global timeout in IA32_UMWAIT_CONTROL is exceeded
101: * 3) an external interrupt occurs
102: */
103: static void delay_halt_tpause(u64 start, u64 cycles)
104: {
105: u64 until = start + cycles;
106: u32 eax, edx;
107:
108: eax = lower_32_bits(until);
109: edx = upper_32_bits(until);
110:
111: /*
112: * Hard code the deeper (C0.2) sleep state because exit latency is
113: * small compared to the "microseconds" that usleep() will delay.
114: */
115: __tpause(TPAUSE_C02_STATE, edx, eax);
116: }
117:
118: /*
119: * On some AMD platforms, MWAITX has a configurable 32-bit timer, that
120: * counts with TSC frequency. The input value is the number of TSC cycles
121: * to wait. MWAITX will also exit when the timer expires.
122: */
123: static void delay_halt_mwaitx(u64 unused, u64 cycles)
124: {
125: u64 delay;
126:
127: delay = min_t(u64, MWAITX_MAX_WAIT_CYCLES, cycles);
128: /*
129: * Use cpu_tss_rw as a cacheline-aligned, seldom accessed per-cpu
130: * variable as the monitor target.
131: */
132: __monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
133:
134: /*
135: * AMD, like Intel, supports the EAX hint and EAX=0xf means, do not
136: * enter any deep C-state and we use it here in delay() to minimize
137: * wakeup latency.
138: */
139: __mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
]
|
| 95/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 70958
output: 38
thoughts: 237
Thoughts: **Analyzing the Impact of `delay_tsc` and Preemption**
Okay, so I'm looking at this `delay_tsc` function, and the first thing that jumps out is the use of `preempt_enable()` right at the top. This is significant. It's allowing real-time tasks to run, which is expected behavior, but the implications here are important. Then, `native_pause()` follows, and then `preempt_disable()` is used.
I'm zeroing in on that `preempt_enable()` call. In a kernel configured for lazy preemption, or any preemptible kernel configuration, if `TIF_NEED_RESCHED` is set, `preempt_enable()` will trigger `__preempt_schedule()`. Bingo. That's where the magic happens, and that's when a context switch is possible.
I see a task, task 3283, is PREEMPTED! This means another task is now running on CPU 1. Hold on, this is where it gets interesting. I'm starting to think about the possible race conditions or scheduling complexities. Did something else run while task 3283 was paused? Or, when task 3283 resumes later, what if another task ran on CPU 1? Or, what if the task 3283 was scheduled back on the same CPU? This all requires further investigation, and I need to consider those possibilities.
Wait a second. When a task is preempted, `schedule()` is ultimately called. That's the core of the scheduler. So, now, I need to know precisely what `schedule()` does. What are its exact inner workings? I'll check `__schedule` in `kernel/sched/core.c`. This is where the scheduling decisions are made.
Now, I'm thinking about the data it reads. Does `schedule()` read `prev->flags`? It almost certainly does, but I need to be certain. Time to search for occurrences of `->flags` within `kernel/sched/core.c` to confirm its access patterns. This will reveal critical information about how task state is examined and used during the scheduling process.
|
| 96/2 |
2026/11/18 23:50 |
tool |
grepper |
0m
Args: map[Expression:(prev|next|p|current)->flags PathPrefixes:[kernel/sched/core.c]]
Results: map[Output:kernel/sched/core.c=2539=static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
--
kernel/sched/core.c-2549- /* Non kernel threads are not allowed during either online or offline. */
kernel/sched/core.c:2550: if (!(p->flags & PF_KTHREAD)) {
kernel/sched/core.c-2551- /* Try to use preferred CPU if task's affinity allows */
--
kernel/sched/core.c=3158=static int __set_cpus_allowed_ptr_locked(struct task_struct *p,
--
kernel/sched/core.c-3165- const struct cpumask *cpu_valid_mask = cpu_active_mask;
kernel/sched/core.c:3166: bool kthread = p->flags & PF_KTHREAD;
kernel/sched/core.c-3167- unsigned int dest_cpu;
--
kernel/sched/core.c-3192- */
kernel/sched/core.c:3193: if ((ctx->flags & SCA_CHECK) && (p->flags & PF_NO_SETAFFINITY)) {
kernel/sched/core.c-3194- ret = -EINVAL;
--
kernel/sched/core.c=7396=void __noreturn do_task_dead(void)
--
kernel/sched/core.c-7401- /* Tell freezer to ignore us: */
kernel/sched/core.c:7402: current->flags |= PF_NOFREEZE;
kernel/sched/core.c-7403-
--
kernel/sched/core.c=7718=void rt_mutex_futex_pre_schedule(void)
kernel/sched/core.c-7719-{
kernel/sched/core.c:7720: lockdep_assert(!(current->flags & (PF_WQ_WORKER | PF_IO_WORKER)));
kernel/sched/core.c-7721- lockdep_assert(!current->plug);
--
kernel/sched/core.c=8155=void sched_show_task(struct task_struct *p)
--
kernel/sched/core.c-8174- free, task_pid_nr(p), task_tgid_nr(p),
kernel/sched/core.c:8175: ppid, p->flags, read_task_thread_flags(p));
kernel/sched/core.c-8176-
--
kernel/sched/core.c=8320=int task_can_attach(struct task_struct *p)
--
kernel/sched/core.c-8332- */
kernel/sched/core.c:8333: if (p->flags & PF_NO_SETAFFINITY)
kernel/sched/core.c-8334- ret = -EINVAL;
--
kernel/sched/core.c=8861=void __init sched_init_smp(void)
--
kernel/sched/core.c-8878- BUG();
kernel/sched/core.c:8879: current->flags &= ~PF_NO_SETAFFINITY;
kernel/sched/core.c-8880- sched_init_granularity();
--
kernel/sched/core.c=9267=void normalize_rt_tasks(void)
--
kernel/sched/core.c-9278- */
kernel/sched/core.c:9279: if (p->flags & PF_KTHREAD)
kernel/sched/core.c-9280- continue;
]
|
| 97/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 72628
output: 29
thoughts: 57
Thoughts: Here's my thought process, as if I were analyzing this code:
**Diving into the Scheduler's Inner Workings**
Okay, hold on a second. I need to get a clearer picture of how this context switching is happening. Where is the magic, the *real* magic, happening? My intuition tells me to zero in on the key tracepoints related to task switching. I should look at `finish_task_switch`, `context_switch`, or perhaps even `sched_switch`. That's where I'll find the core of the action.
The immediate next question is, what does `context_switch` actually *do*? What other functions are involved? To get a deeper understanding, I need to trace this function and understand the flow. I should probably be looking at the call stack as well.
Let's switch gears. I'm going to start digging into the `kernel/sched/core.c` file. This is the heart of the scheduler. I'll search for references to those tracepoints I mentioned. I'll also scan for other related functions in there. Functions that might be involved with scheduling decisions, saving and restoring registers, anything that smells of context switching. This is where the real low-level details should be. Time to get my hands dirty!
|
| 98/2 |
2026/11/18 23:50 |
tool |
grepper |
0m
Args: map[Expression:trace_sched_switch PathPrefixes:[kernel/sched]]
Results: map[Output:kernel/sched/core.c=7211=static void __sched notrace __schedule(int sched_mode)
--
kernel/sched/core.c-7382-
kernel/sched/core.c:7383: trace_sched_switch(preempt, prev, next, prev_state);
kernel/sched/core.c-7384-
]
|
| 99/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 73090
output: 37
thoughts: 40
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, as if they were my own:
**Investigating the `sched_switch` Tracepoint**
Right, let's dive straight in and check the definition of `trace_sched_switch`. I know this tracepoint is critical for performance analysis, so understanding its inner workings is paramount. The first port of call is usually the source, so let's check `include/trace/events/sched.h`. Time to do a quick `grep` for `TRACE_EVENT(sched_switch` within that file. That should give me the macro expansion and underlying structure definition. From there, I can analyze the arguments, understand the data fields it captures, and ensure I'm interpreting the trace data correctly. It's all about verifying the source of truth, really.
|
| 100/2 |
2026/11/18 23:50 |
tool |
grepper |
0m
Args: map[Expression:TRACE_EVENT\(sched_switch PathPrefixes:[include/trace/events/sched.h]]
Results: map[Output:include/trace/events/sched.h=190=static inline long __trace_sched_switch_state(bool preempt,
--
include/trace/events/sched.h-219- */
include/trace/events/sched.h:220:TRACE_EVENT(sched_switch,
include/trace/events/sched.h-221-
]
|
| 101/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 73443
output: 37
thoughts: 22
Thoughts: Here's my summary, as if I were thinking these thoughts:
**Diving into the Scheduler Tracing Code**
Okay, time to dig into the kernel's scheduler tracing. I know this code pretty well, but I need to refresh my memory on this specific area. Let's start with the header file, specifically `include/trace/events/sched.h`. I'm heading towards line 220. I'm hoping to get a clearer picture of whatever event this section defines, or whatever data structure is being used there. Hopefully, this will lead me to the piece of code I'm really after.
|
| 102/2 |
2026/11/18 23:50 |
tool |
read-file |
0m
Args: map[File:include/trace/events/sched.h FirstLine:220 LineCount:40]
Results: map[Contents: 220: TRACE_EVENT(sched_switch,
221:
222: TP_PROTO(bool preempt,
223: struct task_struct *prev,
224: struct task_struct *next,
225: unsigned int prev_state),
226:
227: TP_ARGS(preempt, prev, next, prev_state),
228:
229: TP_STRUCT__entry(
230: __array( char, prev_comm, TASK_COMM_LEN )
231: __field( pid_t, prev_pid )
232: __field( int, prev_prio )
233: __field( long, prev_state )
234: __array( char, next_comm, TASK_COMM_LEN )
235: __field( pid_t, next_pid )
236: __field( int, next_prio )
237: ),
238:
239: TP_fast_assign(
240: memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
241: __entry->prev_pid = prev->pid;
242: __entry->prev_prio = prev->prio;
243: __entry->prev_state = __trace_sched_switch_state(preempt, prev_state, prev);
244: memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
245: __entry->next_pid = next->pid;
246: __entry->next_prio = next->prio;
247: /* XXX SCHED_DEADLINE */
248: ),
249:
250: TP_printk("prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d",
251: __entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
252:
253: (__entry->prev_state & (TASK_REPORT_MAX - 1)) ?
254: __print_flags(__entry->prev_state & (TASK_REPORT_MAX - 1), "|",
255: { TASK_INTERRUPTIBLE, "S" },
256: { TASK_UNINTERRUPTIBLE, "D" },
257: { __TASK_STOPPED, "T" },
258: { __TASK_TRACED, "t" },
259: { EXIT_DEAD, "X" },
]
|
| 103/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 74384
output: 37
thoughts: 41
Thoughts: Okay, let's see. My first thought is: **Decoding `__trace_sched_switch_state`**
Wait a second, I need to jog my memory on what that function does. I'm drawing a blank on the exact details. Okay, no problem, let's head over to the source code to refresh my understanding. Specifically, I'll need to look at lines 190 to 218 in `include/trace/events/sched.h`. That's where it should be defined, or at least documented. Hopefully, it's clearly explained there, and I can quickly re-establish my mental model. Time to go dig into those lines and refresh my memory.
|
| 104/2 |
2026/11/18 23:50 |
tool |
read-file |
0m
Args: map[File:include/trace/events/sched.h FirstLine:190 LineCount:30]
Results: map[Contents: 190: static inline long __trace_sched_switch_state(bool preempt,
191: unsigned int prev_state,
192: struct task_struct *p)
193: {
194: unsigned int state;
195:
196: BUG_ON(p != current);
197:
198: /*
199: * Preemption ignores task state, therefore preempted tasks are always
200: * RUNNING (we will not have dequeued if state != RUNNING).
201: */
202: if (preempt)
203: return TASK_REPORT_MAX;
204:
205: /*
206: * task_state_index() uses fls() and returns a value from 0-8 range.
207: * Decrement it by 1 (except TASK_RUNNING state i.e 0) before using
208: * it for left shift operation to get the correct task->state
209: * mapping.
210: */
211: state = __task_state_index(prev_state, p->exit_state);
212:
213: return state ? (1 << (state - 1)) : state;
214: }
215: #endif /* CREATE_TRACE_POINTS */
216:
217: /*
218: * Tracepoint for task switches, performed by the scheduler:
219: */
]
|
| 105/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 75041
output: 25
thoughts: 78
Thoughts: Okay, here's my thought process as I'd articulate it, keeping in mind my expertise:
**Hunting Down a Data Race**
Okay, first things first, something's accessing `task->flags`. That's a classic red flag. My immediate instinct is to look for past instances of data races around memory addresses like "0x0". I've seen that before, and it often points to a specific type of memory corruption. So, I need to understand the history of this access.
My initial approach is to go straight for a `git log` search, targeting commits that explicitly mentioned "data-race in 0x0." Hmm, that's odd. Why did the `git log` search come back empty? Of course! `git log` primarily searches *commit messages*. It won't necessarily dig into the code itself unless the message mentions it explicitly.
So, I need to broaden the net. If my initial precise search fails, let's look for "data-race in" within the commit history. That should give me a wider set of potentially related commits that are likely to discuss the underlying issues. Let's see what that uncovers.
|
| 106/2 |
2026/11/18 23:50 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[data-race in]]
Results: map[Output:f91f64a91682 batman-adv: Close OGM aggregation before transmission
e7b01bc0202a pppoe: wait for RCU readers before reusing a socket
306f788134a2 net/sched: gred: keep the qdisc lock while updating the table
51542d55bcd5 mm/page_counter: use WRITE_ONCE() for emin/elow when parent is the root
d06ae66516e1 l2tp: snapshot sequencing state when building transmit headers
]
|
| 107/2 |
2026/11/18 23:50 |
llm |
expert |
0m
Model:
Tokens:
input: 75537
output: 29
thoughts: 135
Thoughts: **Investigating Potential Data Races with PF_SUPERPRIV**
Okay, let's re-examine this. My initial thought is to go back to the git logs and specifically search for instances of "PF_SUPERPRIV," unquoted, just like we've done before. I remember we found commits like `fb14528e4436` ("seccomp: Set PF_SUPERPRIV when checking capability"), `cf23705244c9`, and `cc658db47d68`. But now, I need to take a step back and think strategically.
The core question is this: Has there been any documented incident, any bug report, any mention of a data race related to `PF_SUPERPRIV` or, more specifically, the assignment `current->flags |= PF_SUPERPRIV`? If there were any issues, I would have expected to remember them.
Therefore, I need to expand the search. I should leverage `CodeRegexp` or `MessageRegexps` within `git log` to get a more comprehensive view. I want to cast a wider net and see if anything is lurking beneath the surface that might indicate concurrent access issues related to `PF_SUPERPRIV`. This will help determine if it's safe to continue with what we have already done, or if there is something more sinister here.
|
| 108/2 |
2026/11/18 23:50 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[PF_SUPERPRIV race]]
Results: map[Output:cf23705244c9 ptrace: Set PF_SUPERPRIV when checking capability
5cd9c58fbe9e security: Fix setting of PF_SUPERPRIV by __capable()
]
|
| 109/2 |
2026/11/18 23:51 |
llm |
expert |
0m
Model:
Tokens:
input: 76049
output: 25
thoughts: 26
Thoughts: Okay, here's my interpretation of that:
**Diving into the Code History**
Alright, let's zero in on this particular commit, `5cd9c58fbe9e`. I need to understand what changed there. I'm going to pull up `git show` on that bad boy. I'm expecting to see the diff, the commit message, and all the details. This is the starting point for whatever I'm troubleshooting, reviewing, or just trying to understand within this codebase. Time to get the lowdown.
|
| 110/2 |
2026/11/18 23:51 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 5cd9c58fbe9ec92b45b27e131719af4f2bd9eb40
Author: David Howells <dhowells@redhat.com>
Date: Thu Aug 14 11:37:28 2008 +0100
security: Fix setting of PF_SUPERPRIV by __capable()
Fix the setting of PF_SUPERPRIV by __capable() as it could corrupt the flags
the target process if that is not the current process and it is trying to
change its own flags in a different way at the same time.
__capable() is using neither atomic ops nor locking to protect t->flags. This
patch removes __capable() and introduces has_capability() that doesn't set
PF_SUPERPRIV on the process being queried.
This patch further splits security_ptrace() in two:
(1) security_ptrace_may_access(). This passes judgement on whether one
process may access another only (PTRACE_MODE_ATTACH for ptrace() and
PTRACE_MODE_READ for /proc), and takes a pointer to the child process.
current is the parent.
(2) security_ptrace_traceme(). This passes judgement on PTRACE_TRACEME only,
and takes only a pointer to the parent process. current is the child.
In Smack and commoncap, this uses has_capability() to determine whether
the parent will be permitted to use PTRACE_ATTACH if normal checks fail.
This does not set PF_SUPERPRIV.
Two of the instances of __capable() actually only act on current, and so have
been changed to calls to capable().
Of the places that were using __capable():
(1) The OOM killer calls __capable() thrice when weighing the killability of a
process. All of these now use has_capability().
(2) cap_ptrace() and smack_ptrace() were using __capable() to check to see
whether the parent was allowed to trace any process. As mentioned above,
these have been split. For PTRACE_ATTACH and /proc, capable() is now
used, and for PTRACE_TRACEME, has_capability() is used.
(3) cap_safe_nice() only ever saw current, so now uses capable().
(4) smack_setprocattr() rejected accesses to tasks other than current just
after calling __capable(), so the order of these two tests have been
switched and capable() is used instead.
(5) In smack_file_send_sigiotask(), we need to allow privileged processes to
receive SIGIO on files they're manipulating.
(6) In smack_task_wait(), we let a process wait for a privileged process,
whether or not the process doing the waiting is privileged.
I've tested this with the LTP SELinux and syscalls testscripts.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 02673846d205..9d1fe30b6f6c 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -503,8 +503,19 @@ extern const kernel_cap_t __cap_init_eff_set;
kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
-int capable(int cap);
-int __capable(struct task_struct *t, int cap);
+/**
+ * has_capability - Determine if a task has a superior capability available
+ * @t: The task in question
+ * @cap: The capability to be tested for
+ *
+ * Return true if the specified task has the given superior capability
+ * currently in effect, false if not.
+ *
+ * Note that this does not set PF_SUPERPRIV on the task.
+ */
+#define has_capability(t, cap) (security_capable((t), (cap)) == 0)
+
+extern int capable(int cap);
#endif /* __KERNEL__ */
diff --git a/include/linux/security.h b/include/linux/security.h
index fd96e7f8a6f9..2ee5ecfb2393 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -46,8 +46,8 @@ struct audit_krule;
*/
extern int cap_capable(struct task_struct *tsk, int cap);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1157,17 +1157,24 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
- * @ptrace:
- * Check permission before allowing the @parent process to trace the
+ * @ptrace_may_access:
+ * Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
* during an execve in the set_security or apply_creds hooks of
* binprm_security_ops if the process is being traced and its security
* attributes would be changed by the execve.
- * @parent contains the task_struct structure for parent process.
- * @child contains the task_struct structure for child process.
+ * @child contains the task_struct structure for the target process.
* @mode contains the PTRACE_MODE flags indicating the form of access.
* Return 0 if permission is granted.
+ * @ptrace_traceme:
+ * Check that the @parent process has sufficient permission to trace the
+ * current process before allowing the current process to present itself
+ * to the @parent process for tracing.
+ * The parent process will still have to undergo the ptrace_may_access
+ * checks before it is allowed to trace this one.
+ * @parent contains the task_struct structure for debugger process.
+ * Return 0 if permission is granted.
* @capget:
* Get the @effective, @inheritable, and @permitted capability sets for
* the @target process. The hook may also perform permission checking to
@@ -1287,8 +1294,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace) (struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+ int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+ int (*ptrace_traceme) (struct task_struct *parent);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1560,8 +1567,8 @@ extern struct dentry *securityfs_create_dir(const char *name, struct dentry *par
extern void securityfs_remove(struct dentry *dentry);
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable,
@@ -1742,11 +1749,15 @@ static inline int security_init(void)
return 0;
}
-static inline int security_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static inline int security_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
+{
+ return cap_ptrace_may_access(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *child)
{
- return cap_ptrace(parent, child, mode);
+ return cap_ptrace_traceme(parent);
}
static inline int security_capget(struct task_struct *target,
diff --git a/kernel/capability.c b/kernel/capability.c
index 0101e847603e..33e51e78c2d8 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -486,17 +486,22 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
return ret;
}
-int __capable(struct task_struct *t, int cap)
+/**
+ * capable - Determine if the current task has a superior capability in effect
+ * @cap: The capability to be tested for
+ *
+ * Return true if the current task has the given superior capability currently
+ * available for use, false if not.
+ *
+ * This sets PF_SUPERPRIV on the task if the capability is available on the
+ * assumption that it's about to be used.
+ */
+int capable(int cap)
{
- if (security_capable(t, cap) == 0) {
- t->flags |= PF_SUPERPRIV;
+ if (has_capability(current, cap)) {
+ current->flags |= PF_SUPERPRIV;
return 1;
}
return 0;
}
-
-int capable(int cap)
-{
- return __capable(current, cap);
-}
EXPORT_SYMBOL(capable);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 082b3fcb32a0..356699a96d56 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -140,7 +140,7 @@ int __ptrace_may_access(struct task_struct *task, unsigned int mode)
if (!dumpable && !capable(CAP_SYS_PTRACE))
return -EPERM;
- return security_ptrace(current, task, mode);
+ return security_ptrace_may_access(task, mode);
}
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
@@ -499,8 +499,7 @@ int ptrace_traceme(void)
goto repeat;
}
- ret = security_ptrace(current->parent, current,
- PTRACE_MODE_ATTACH);
+ ret = security_ptrace_traceme(current->parent);
/*
* Set the ptrace bit in the process ptrace flags.
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 8a5467ee6265..64e5b4bcd964 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/memcontrol.h>
+#include <linux/security.h>
int sysctl_panic_on_oom;
int sysctl_oom_kill_allocating_task;
@@ -128,7 +129,8 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
* Superuser processes are usually more important, so we make it
* less likely that we kill those.
*/
- if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE))
+ if (has_capability(p, CAP_SYS_ADMIN) ||
+ has_capability(p, CAP_SYS_RESOURCE))
points /= 4;
/*
@@ -137,7 +139,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
* tend to only have this flag set on applications they think
* of as important.
*/
- if (__capable(p, CAP_SYS_RAWIO))
+ if (has_capability(p, CAP_SYS_RAWIO))
points /= 4;
/*
diff --git a/security/capability.c b/security/capability.c
index 63d10da515a5..245874819036 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -811,7 +811,8 @@ struct security_operations default_security_ops = {
void security_fixup_ops(struct security_operations *ops)
{
- set_to_cap_if_null(ops, ptrace);
+ set_to_cap_if_null(ops, ptrace_may_access);
+ set_to_cap_if_null(ops, ptrace_traceme);
set_to_cap_if_null(ops, capget);
set_to_cap_if_null(ops, capset_check);
set_to_cap_if_null(ops, capset_set);
diff --git a/security/commoncap.c b/security/commoncap.c
index 4afbece37a08..e4c4b3fc0c04 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -63,14 +63,24 @@ int cap_settime(struct timespec *ts, struct timezone *tz)
return 0;
}
-int cap_ptrace (struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
- if (!cap_issubset(child->cap_permitted, parent->cap_permitted) &&
- !__capable(parent, CAP_SYS_PTRACE))
- return -EPERM;
- return 0;
+ if (cap_issubset(child->cap_permitted, current->cap_permitted))
+ return 0;
+ if (capable(CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
+}
+
+int cap_ptrace_traceme(struct task_struct *parent)
+{
+ /* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
+ if (cap_issubset(current->cap_permitted, parent->cap_permitted))
+ return 0;
+ if (has_capability(parent, CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
}
int cap_capget (struct task_struct *target, kernel_cap_t *effective,
@@ -534,7 +544,7 @@ int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid,
static inline int cap_safe_nice(struct task_struct *p)
{
if (!cap_issubset(p->cap_permitted, current->cap_permitted) &&
- !__capable(current, CAP_SYS_NICE))
+ !capable(CAP_SYS_NICE))
return -EPERM;
return 0;
}
diff --git a/security/root_plug.c b/security/root_plug.c
index be0ebec2580b..c3f68b5b372d 100644
--- a/security/root_plug.c
+++ b/security/root_plug.c
@@ -72,7 +72,8 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm)
static struct security_operations rootplug_security_ops = {
/* Use the capability functions for some of the hooks */
- .ptrace = cap_ptrace,
+ .ptrace_may_access = cap_ptrace_may_access,
+ .ptrace_traceme = cap_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
diff --git a/security/security.c b/security/security.c
index ff7068727757..3a4b4f55b33f 100644
--- a/security/security.c
+++ b/security/security.c
@@ -127,10 +127,14 @@ int register_security(struct security_operations *ops)
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
- return security_ops->ptrace(parent, child, mode);
+ return security_ops->ptrace_may_access(child, mode);
+}
+
+int security_ptrace_traceme(struct task_struct *parent)
+{
+ return security_ops->ptrace_traceme(parent);
}
int security_capget(struct task_struct *target,
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 3ae9bec5a508..03fc6a81ae32 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1738,24 +1738,34 @@ static inline u32 file_to_av(struct file *file)
/* Hook functions begin here. */
-static int selinux_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static int selinux_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
{
int rc;
- rc = secondary_ops->ptrace(parent, child, mode);
+ rc = secondary_ops->ptrace_may_access(child, mode);
if (rc)
return rc;
if (mode == PTRACE_MODE_READ) {
- struct task_security_struct *tsec = parent->security;
+ struct task_security_struct *tsec = current->security;
struct task_security_struct *csec = child->security;
return avc_has_perm(tsec->sid, csec->sid,
SECCLASS_FILE, FILE__READ, NULL);
}
- return task_has_perm(parent, child, PROCESS__PTRACE);
+ return task_has_perm(current, child, PROCESS__PTRACE);
+}
+
+static int selinux_ptrace_traceme(struct task_struct *parent)
+{
+ int rc;
+
+ rc = secondary_ops->ptrace_traceme(parent);
+ if (rc)
+ return rc;
+
+ return task_has_perm(parent, current, PROCESS__PTRACE);
}
static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
@@ -5346,7 +5356,8 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer)
static struct security_operations selinux_ops = {
.name = "selinux",
- .ptrace = selinux_ptrace,
+ .ptrace_may_access = selinux_ptrace_may_access,
+ .ptrace_traceme = selinux_ptrace_traceme,
.capget = selinux_capget,
.capset_check = selinux_capset_check,
.capset_set = selinux_capset_set,
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 1b40e558f983..87d75417ea93 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -87,27 +87,46 @@ struct inode_smack *new_inode_smack(char *smack)
*/
/**
- * smack_ptrace - Smack approval on ptrace
- * @ptp: parent task pointer
+ * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
* @ctp: child task pointer
*
* Returns 0 if access is OK, an error code otherwise
*
* Do the capability checks, and require read and write.
*/
-static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp,
- unsigned int mode)
+static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
{
int rc;
- rc = cap_ptrace(ptp, ctp, mode);
+ rc = cap_ptrace_may_access(ctp, mode);
if (rc != 0)
return rc;
- rc = smk_access(ptp->security, ctp->security, MAY_READWRITE);
- if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE))
+ rc = smk_access(current->security, ctp->security, MAY_READWRITE);
+ if (rc != 0 && capable(CAP_MAC_OVERRIDE))
return 0;
+ return rc;
+}
+
+/**
+ * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME
+ * @ptp: parent task pointer
+ *
+ * Returns 0 if access is OK, an error code otherwise
+ *
+ * Do the capability checks, and require read and write.
+ */
+static int smack_ptrace_traceme(struct task_struct *ptp)
+{
+ int rc;
+
+ rc = cap_ptrace_traceme(ptp);
+ if (rc != 0)
+ return rc;
+ rc = smk_access(ptp->security, current->security, MAY_READWRITE);
+ if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
+ return 0;
return rc;
}
@@ -923,7 +942,7 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
*/
file = container_of(fown, struct file, f_owner);
rc = smk_access(file->f_security, tsk->security, MAY_WRITE);
- if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE))
+ if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
return 0;
return rc;
}
@@ -1164,12 +1183,12 @@ static int smack_task_wait(struct task_struct *p)
* account for the smack labels having gotten to
* be different in the first place.
*
- * This breaks the strict subjet/object access
+ * This breaks the strict subject/object access
* control ideal, taking the object's privilege
* state into account in the decision as well as
* the smack value.
*/
- if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE))
+ if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
return 0;
return rc;
@@ -2016,9 +2035,6 @@ static int smack_setprocattr(struct task_struct *p, char *name,
{
char *newsmack;
- if (!__capable(p, CAP_MAC_ADMIN))
- return -EPERM;
-
/*
* Changing another process' Smack value is too dangerous
* and supports no sane use case.
@@ -2026,6 +2042,9 @@ static int smack_setprocattr(struct task_struct *p, char *name,
if (p != current)
return -EPERM;
+ if (!capable(CAP_MAC_ADMIN))
+ return -EPERM;
+
if (value == NULL || size == 0 || size >= SMK_LABELLEN)
return -EINVAL;
@@ -2552,7 +2571,8 @@ static void smack_release_secctx(char *secdata, u32 seclen)
struct security_operations smack_ops = {
.name = "smack",
- .ptrace = smack_ptrace,
+ .ptrace_may_access = smack_ptrace_may_access,
+ .ptrace_traceme = smack_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
@@ -2729,4 +2749,3 @@ static __init int smack_init(void)
* all processes and objects when they are created.
*/
security_initcall(smack_init);
-
]
|
| 111/2 |
2026/11/18 23:51 |
llm |
expert |
0m
Model:
Tokens:
input: 83226
output: 35
thoughts: 1799
Thoughts: **KCSAN Data Race Investigation: PF_SUPERPRIV and Compound Accesses**
Okay, so I'm looking at this commit, and it's dealing with a potential race condition involving `PF_SUPERPRIV` being set by `__capable()`. The commit removes `__capable()` and introduces `has_capability()` instead. The concern is that `__capable()` could corrupt flags in a target process if they are modifying their own flags simultaneously.
The initial KCSAN report is bugging me: it reports a data race in `capable_wrt_inode_uidgid`, specifically a "read-write" to an address and the stack trace shows `ns_capable_common`, `ns_capable`, and the problematic function. The interesting thing is that the read access is reported as `0x0`. Why? Let's dig into the KCSAN code.
I went to `kernel/kcsan/report.c`, and I see the root cause. When `other_frame` is 0, the report prints "0x0" in the error title. This happens because `other_info->stack_entries[other_skipnr]` is 0.
So, why is `other_info->stack_entries` empty?
Now, let's look at `kernel/kcsan/core.c` line 770! It turns out if `KCSAN_ACCESS_SCOPED` isn't set, there's a possibility of *reordering*. I noticed `goto again;` within `check_access`. This is the key. KCSAN's weak memory model allows for reordering, where an access can be "reordered" after a subsequent operation.
Where is this `reorder_access` happening? It's set in `kcsan_setup_watchpoint` and accessed through `get_reorder_access`. This means if a watchpoint is set, KCSAN is watching a compound write, like when `current->flags |= PF_SUPERPRIV` is modified. When we have `current->flags |= PF_SUPERPRIV`, this is a compound operation (read, OR, write). So first, `__tsan_read4(¤t->flags)` and then `__tsan_write4(¤t->flags)`.
That "read-write" in the KCSAN report: it's because KCSAN detects the `read-modify-write` operation and marks it with the `KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE`.
So, the issue is that KCSAN is detecting a read and then a write to the same memory location as separate accesses due to the read-modify-write nature of `current->flags |= PF_SUPERPRIV`. This, in turn, is caused by the compiler's code generation for this particular operation, and KCSAN's instrumentation picking up on it. This is why it reports a "data-race".
|
| 112/2 |
2026/11/18 23:51 |
tool |
grepper |
0m
Args: map[Expression:KCSAN_ACCESS_COMPOUND PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=231=is_atomic(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size, int type)
--
kernel/kcsan/core.c-245- (type & KCSAN_ACCESS_WRITE) && size <= sizeof(long) &&
kernel/kcsan/core.c:246: !(type & KCSAN_ACCESS_COMPOUND) && IS_ALIGNED((unsigned long)ptr, size))
kernel/kcsan/core.c-247- return true; /* Assume aligned writes up to word size are atomic. */
--
kernel/kcsan/core.c=322=static void delay_access(int type)
--
kernel/kcsan/core.c-326- unsigned int skew_delay_order =
kernel/kcsan/core.c:327: (type & (KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_ASSERT)) ? 1 : 0;
kernel/kcsan/core.c-328-
--
kernel/kcsan/core.c=982=DEFINE_MEMORY_BARRIER(mb, true);
kernel/kcsan/core.c:983:DEFINE_MEMORY_BARRIER(wmb, sa->type & (KCSAN_ACCESS_WRITE | KCSAN_ACCESS_COMPOUND));
kernel/kcsan/core.c:984:DEFINE_MEMORY_BARRIER(rmb, !(sa->type & KCSAN_ACCESS_WRITE) || (sa->type & KCSAN_ACCESS_COMPOUND));
kernel/kcsan/core.c-985-DEFINE_MEMORY_BARRIER(release, true);
--
kernel/kcsan/core.c-1022- check_access(ptr, size, \
kernel/kcsan/core.c:1023: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE, \
kernel/kcsan/core.c-1024- _RET_IP_); \
--
kernel/kcsan/core.c=1171=static __always_inline void kcsan_atomic_builtin_memorder(int memorder)
--
kernel/kcsan/core.c-1208- check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c:1209: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
kernel/kcsan/core.c-1210- KCSAN_ACCESS_ATOMIC, _RET_IP_); \
--
kernel/kcsan/core.c-1241- check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c:1242: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
kernel/kcsan/core.c-1243- KCSAN_ACCESS_ATOMIC, _RET_IP_); \
--
kernel/kcsan/core.c-1257- check_access(ptr, bits / BITS_PER_BYTE, \
kernel/kcsan/core.c:1258: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
kernel/kcsan/core.c-1259- KCSAN_ACCESS_ATOMIC, _RET_IP_); \
--
kernel/kcsan/kcsan_test.c-40-#ifdef CONFIG_CC_HAS_TSAN_COMPOUND_READ_BEFORE_WRITE
kernel/kcsan/kcsan_test.c:41:#define __KCSAN_ACCESS_RW(alt) (KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE)
kernel/kcsan/kcsan_test.c-42-#else
--
kernel/kcsan/kcsan_test.c=189=static bool __report_matches(const struct expect_report *r)
--
kernel/kcsan/kcsan_test.c-247- ((ty & KCSAN_ACCESS_WRITE) ?
kernel/kcsan/kcsan_test.c:248: ((ty & KCSAN_ACCESS_COMPOUND) ?
kernel/kcsan/kcsan_test.c-249- "read-write" :
--
kernel/kcsan/kcsan_test.c=560=static void test_barrier_nothreads(struct kunit *test)
--
kernel/kcsan/kcsan_test.c-583-#define KCSAN_EXPECT_WRITE_BARRIER(b, o) __KCSAN_EXPECT_BARRIER(KCSAN_ACCESS_WRITE, b, o, #b)
kernel/kcsan/kcsan_test.c:584:#define KCSAN_EXPECT_RW_BARRIER(b, o) __KCSAN_EXPECT_BARRIER(KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE, b, o, #b)
kernel/kcsan/kcsan_test.c-585-
--
kernel/kcsan/kcsan_test.c=986=static void test_read_plain_atomic_rmw(struct kunit *test)
--
kernel/kcsan/kcsan_test.c-991- { test_kernel_atomic_rmw, &test_var, sizeof(test_var),
kernel/kcsan/kcsan_test.c:992: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC },
kernel/kcsan/kcsan_test.c-993- },
--
kernel/kcsan/report.c=214=static const char *get_access_type(int type)
--
kernel/kcsan/report.c-238- return "write (marked)";
kernel/kcsan/report.c:239: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
kernel/kcsan/report.c-240- return "read-write";
kernel/kcsan/report.c:241: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
kernel/kcsan/report.c-242- return "read-write (marked)";
--
kernel/kcsan/report.c-250- return "write (marked, reordered)";
kernel/kcsan/report.c:251: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
kernel/kcsan/report.c-252- return "read-write (reordered)";
kernel/kcsan/report.c:253: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
kernel/kcsan/report.c-254- return "read-write (marked, reordered)";
--
kernel/kcsan/selftest.c=110=static bool __init test_barrier(void)
--
kernel/kcsan/selftest.c-136-#define KCSAN_CHECK_WRITE_BARRIER(b) __KCSAN_CHECK_BARRIER(KCSAN_ACCESS_WRITE, b, #b)
kernel/kcsan/selftest.c:137:#define KCSAN_CHECK_RW_BARRIER(b) __KCSAN_CHECK_BARRIER(KCSAN_ACCESS_WRITE | KCSAN_ACCESS_COMPOUND, b, #b)
kernel/kcsan/selftest.c-138-
]
|
| 113/2 |
2026/11/18 23:51 |
llm |
expert |
0m
Model:
Tokens:
input: 87686
output: 38
thoughts: 53
Thoughts: Okay, here's my take on those lines of code, presented as a first-person thought process, keeping in mind my expertise:
**Diving into `kcsan/core.c` for Context**
Alright, I need to get a handle on what's happening around those lines. Specifically, I'm going to scan lines 1015 through 1035 in `kernel/kcsan/core.c`. I really need the surrounding context to understand what's going on within that specific block from 1021-1025. It's likely that it's a critical section, a data race detection, or perhaps some memory access monitoring within the KCSAN framework, so I'm looking for clues about the surrounding logic and what variables are being used. Let's see if this context sheds light on any potential race conditions or other issues that need attention. Time to dig in!
|
| 114/2 |
2026/11/18 23:51 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:1015 LineCount:25]
Results: map[Contents:1015: EXPORT_SYMBOL(__tsan_write##size); \
1016: void __tsan_unaligned_write##size(void *ptr) \
1017: __alias(__tsan_write##size); \
1018: EXPORT_SYMBOL(__tsan_unaligned_write##size); \
1019: void __tsan_read_write##size(void *ptr); \
1020: void __tsan_read_write##size(void *ptr) \
1021: { \
1022: check_access(ptr, size, \
1023: KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE, \
1024: _RET_IP_); \
1025: } \
1026: EXPORT_SYMBOL(__tsan_read_write##size); \
1027: void __tsan_unaligned_read_write##size(void *ptr) \
1028: __alias(__tsan_read_write##size); \
1029: EXPORT_SYMBOL(__tsan_unaligned_read_write##size)
1030:
1031: DEFINE_TSAN_READ_WRITE(1);
1032: DEFINE_TSAN_READ_WRITE(2);
1033: DEFINE_TSAN_READ_WRITE(4);
1034: DEFINE_TSAN_READ_WRITE(8);
1035: DEFINE_TSAN_READ_WRITE(16);
1036:
1037: void __tsan_read_range(void *ptr, size_t size);
1038: void __tsan_read_range(void *ptr, size_t size)
1039: {
]
|
| 115/2 |
2026/11/18 23:51 |
llm |
expert |
0m
Model:
Tokens:
input: 88468
output: 35
thoughts: 543
Thoughts: **Investigating a Concurrency Issue with Task Flags**
Okay, so I'm looking at this trace and immediately I see `void __tsan_read_write4(void *ptr)`! That's interesting, as I know that's emitted by compilers when `CONFIG_CC_HAS_TSAN_COMPOUND_READ_BEFORE_WRITE` is enabled, and it's used for compound expressions like `current->flags |= PF_SUPERPRIV`. Right, so task 3283 is executing that exact line and it ends up calling `__tsan_read_write4(¤t->flags)`. KCSAN's `check_access` then triggers a watchpoint on `¤t->flags` because `should_watch()` decides that it should be watched.
Task 3283 sets up a watchpoint with `is_write = true` and the access `type = KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE`. Got it. Then the trace says it enters `delay_access(type)`. This is where it gets interesting...
While task 3283 is in `delay_access(type)`, specifically during the `udelay(delay)` call, *another* access happens: a read to `0xffff888104b4116c` of 4 bytes, also by task 3283 on CPU 1. Hold on a second... this is where things get fishy! Why would the *same* task perform a *read* to `current->flags` while it's inside `udelay()`? That's the part that's tripping me up. What's even stranger is that it's the *same* address.
I need to figure out what's reading `current->flags` while `udelay` is running on CPU 1. I need to trace this back. Is it something running in an interrupt, a timer, or perhaps a perf event that's somehow reading `current->flags`?
Wait a second... It's `delay_tsc`. Inside of that function is the following code snippet:
/* Allow RT tasks to run */
preempt_enable();
native_pause();
preempt_disable();
That's it! What does `preempt_enable()` do here? I know this could be a race condition, if there is a context switch, `current->flags` could be touched and this is what KCSAN has discovered. I need to look at what `preempt_enable()` does in a preemptible kernel. Let's look up the definition of `preempt_enable()` in `include/linux/preempt.h`...
|
| 116/2 |
2026/11/18 23:51 |
tool |
grepper |
0m
Args: map[Expression:#define preempt_enable\( PathPrefixes:[include/linux/preempt.h]]
Results: map[Output:include/linux/preempt.h=246=do { \
--
include/linux/preempt.h-255-#ifdef CONFIG_PREEMPTION
include/linux/preempt.h:256:#define preempt_enable() \
include/linux/preempt.h-257-do { \
--
include/linux/preempt.h=271=do { \
--
include/linux/preempt.h-276-#else /* !CONFIG_PREEMPTION */
include/linux/preempt.h:277:#define preempt_enable() \
include/linux/preempt.h-278-do { \
--
include/linux/preempt.h=299=do { \
--
include/linux/preempt.h-314-#define preempt_enable_no_resched() barrier()
include/linux/preempt.h:315:#define preempt_enable() barrier()
include/linux/preempt.h-316-#define preempt_check_resched() do { } while (0)
]
|
| 117/2 |
2026/11/18 23:51 |
llm |
expert |
0m
Model:
Tokens:
input: 89901
output: 36
thoughts: 21
Thoughts: Here's my take on the thought process, tailored for an expert audience:
**Diving into Preemption Context**
Okay, so I'm thinking, let's refresh our memory on the nitty-gritty of preemption in the Linux kernel. Where's the best starting point? Ah, right, `include/linux/preempt.h` β that's the canonical header. Specifically, I'm aiming for around line 256. I figure that's likely where the core preemption control mechanisms or related macros are defined, maybe even the state variables that regulate preemption. Gotta get a solid grasp of *that* area, before delving into anything context specific.
|
| 118/2 |
2026/11/18 23:52 |
tool |
read-file |
0m
Args: map[File:include/linux/preempt.h FirstLine:250 LineCount:40]
Results: map[Contents: 250:
251: #define preempt_enable_no_resched() sched_preempt_enable_no_resched()
252:
253: #define preemptible() (preempt_count() == 0 && !irqs_disabled())
254:
255: #ifdef CONFIG_PREEMPTION
256: #define preempt_enable() \
257: do { \
258: barrier(); \
259: if (unlikely(preempt_count_dec_and_test())) \
260: __preempt_schedule(); \
261: } while (0)
262:
263: #define preempt_enable_notrace() \
264: do { \
265: barrier(); \
266: if (unlikely(__preempt_count_dec_and_test())) \
267: __preempt_schedule_notrace(); \
268: } while (0)
269:
270: #define preempt_check_resched() \
271: do { \
272: if (should_resched(0)) \
273: __preempt_schedule(); \
274: } while (0)
275:
276: #else /* !CONFIG_PREEMPTION */
277: #define preempt_enable() \
278: do { \
279: barrier(); \
280: preempt_count_dec(); \
281: } while (0)
282:
283: #define preempt_enable_notrace() \
284: do { \
285: barrier(); \
286: __preempt_count_dec(); \
287: } while (0)
288:
289: #define preempt_check_resched() do { } while (0)
]
|
| 119/2 |
2026/11/18 23:52 |
llm |
expert |
0m
Model:
Tokens:
input: 90657
output: 26
thoughts: 175
Thoughts: **Analyzing a Preemption Issue**
Okay, hold on a second! This `__preempt_schedule()` call... I need to understand why this is happening. Let's see... what does the report header say? Ah, `PREEMPT(lazy)`! Right, right, it looks like `CONFIG_PREEMPT_LAZY` is indeed enabled. Excellent. So, if `__preempt_schedule()` is triggered, that means it's going to call `schedule()`. Now, let's step back, and figure out exactly what `schedule()` does when dealing with task 3283, specifically when that task is being switched out, or switched back in. I need to understand the control flow here.
I need to see what's reading `p->flags` or `current->flags` in `schedule()` or `context_switch`, because those flags determine behavior. Time to delve into the `kernel/sched/` directory and see what's happening under the hood. I suspect there's a flag interaction that's leading to this preemptive scheduling behavior, and I need to pinpoint the exact sequence.
|
| 120/2 |
2026/11/18 23:52 |
tool |
grepper |
0m
Args: map[Expression:->flags PathPrefixes:[kernel/sched]]
Results: map[Output:
Full output is too long, showing 200 out of 1176 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (18 files in total):
kernel/sched/autogroup.c:1
kernel/sched/core.c:34
kernel/sched/cputime.c:5
kernel/sched/deadline.c:7
kernel/sched/debug.c:3
kernel/sched/ext/ext.c:29
kernel/sched/ext/idle.c:7
kernel/sched/ext/internal.h:1
kernel/sched/ext/sub.c:11
kernel/sched/fair.c:59
kernel/sched/idle.c:5
kernel/sched/psi.c:1
kernel/sched/rt.c:1
kernel/sched/sched.h:11
kernel/sched/syscalls.c:5
kernel/sched/topology.c:38
kernel/sched/wait.c:20
kernel/sched/wait_bit.c:3
kernel/sched/autogroup.c=131=bool task_wants_autogroup(struct task_struct *p, struct task_group *tg)
--
kernel/sched/autogroup.c-142- */
kernel/sched/autogroup.c:143: if (p->flags & PF_EXITING)
kernel/sched/autogroup.c-144- return false;
--
kernel/sched/core.c=765=struct rq *_task_rq_lock(struct task_struct *p, struct rq_flags *rf)
--
kernel/sched/core.c-769- for (;;) {
kernel/sched/core.c:770: raw_spin_lock_irqsave(&p->pi_lock, rf->flags);
kernel/sched/core.c-771- rq = task_rq(p);
--
kernel/sched/core.c-794- raw_spin_rq_unlock(rq);
kernel/sched/core.c:795: raw_spin_unlock_irqrestore(&p->pi_lock, rf->flags);
kernel/sched/core.c-796-
--
kernel/sched/core.c=1062=static inline bool set_nr_and_not_polling(struct thread_info *ti, int tif)
kernel/sched/core.c-1063-{
kernel/sched/core.c:1064: return !(fetch_or(&ti->flags, 1 << tif) & _TIF_POLLING_NRFLAG);
kernel/sched/core.c-1065-}
--
kernel/sched/core.c=1073=static bool set_nr_if_polling(struct task_struct *p)
--
kernel/sched/core.c-1075- struct thread_info *ti = task_thread_info(p);
kernel/sched/core.c:1076: typeof(ti->flags) val = READ_ONCE(ti->flags);
kernel/sched/core.c-1077-
--
kernel/sched/core.c-1082- return true;
kernel/sched/core.c:1083: } while (!try_cmpxchg(&ti->flags, &val, val | _TIF_NEED_RESCHED));
kernel/sched/core.c-1084-
--
kernel/sched/core.c=1195=static void __resched_curr(struct rq *rq, int tif)
--
kernel/sched/core.c-1210-
kernel/sched/core.c:1211: if (cti->flags & ((1 << tif) | _TIF_NEED_RESCHED))
kernel/sched/core.c-1212- return;
--
kernel/sched/core.c=2539=static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
--
kernel/sched/core.c-2549- /* Non kernel threads are not allowed during either online or offline. */
kernel/sched/core.c:2550: if (!(p->flags & PF_KTHREAD)) {
kernel/sched/core.c-2551- /* Try to use preferred CPU if task's affinity allows */
--
kernel/sched/core.c=2820=void set_cpus_allowed_common(struct task_struct *p, struct affinity_context *ctx)
kernel/sched/core.c-2821-{
kernel/sched/core.c:2822: if (ctx->flags & (SCA_MIGRATE_ENABLE | SCA_MIGRATE_DISABLE)) {
kernel/sched/core.c-2823- p->cpus_ptr = ctx->new_mask;
--
kernel/sched/core.c-2833- */
kernel/sched/core.c:2834: if (ctx->flags & SCA_USER)
kernel/sched/core.c-2835- swap(p->user_cpus_ptr, ctx->user_mask);
--
kernel/sched/core.c=3158=static int __set_cpus_allowed_ptr_locked(struct task_struct *p,
--
kernel/sched/core.c-3165- const struct cpumask *cpu_valid_mask = cpu_active_mask;
kernel/sched/core.c:3166: bool kthread = p->flags & PF_KTHREAD;
kernel/sched/core.c-3167- unsigned int dest_cpu;
--
kernel/sched/core.c-3192- */
kernel/sched/core.c:3193: if ((ctx->flags & SCA_CHECK) && (p->flags & PF_NO_SETAFFINITY)) {
kernel/sched/core.c-3194- ret = -EINVAL;
--
kernel/sched/core.c-3197-
kernel/sched/core.c:3198: if (!(ctx->flags & SCA_MIGRATE_ENABLE)) {
kernel/sched/core.c-3199- if (cpumask_equal(&p->cpus_mask, ctx->new_mask)) {
kernel/sched/core.c:3200: if (ctx->flags & SCA_USER)
kernel/sched/core.c-3201- swap(p->user_cpus_ptr, ctx->user_mask);
--
kernel/sched/core.c-3225-
kernel/sched/core.c:3226: return affine_move_task(rq, p, rf, dest_cpu, ctx->flags);
kernel/sched/core.c-3227-
--
kernel/sched/core.c=3243=int __set_cpus_allowed_ptr(struct task_struct *p, struct affinity_context *ctx)
--
kernel/sched/core.c-3253- if (p->user_cpus_ptr &&
kernel/sched/core.c:3254: !(ctx->flags & (SCA_USER | SCA_MIGRATE_ENABLE | SCA_MIGRATE_DISABLE)) &&
kernel/sched/core.c-3255- cpumask_and(rq->scratch_mask, ctx->new_mask, p->user_cpus_ptr))
--
kernel/sched/core.c=5830=void sched_tick(void)
--
kernel/sched/core.c-5874-
kernel/sched/core.c:5875: if (curr->flags & PF_WQ_WORKER)
kernel/sched/core.c-5876- wq_worker_tick(curr);
--
kernel/sched/core.c=6653=DEFINE_LOCK_GUARD_1(core_lock, int,
kernel/sched/core.c:6654: sched_core_lock(*_T->lock, &_T->flags),
kernel/sched/core.c:6655: sched_core_unlock(*_T->lock, &_T->flags),
kernel/sched/core.c-6656- unsigned long flags)
--
kernel/sched/core.c=7396=void __noreturn do_task_dead(void)
--
kernel/sched/core.c-7401- /* Tell freezer to ignore us: */
kernel/sched/core.c:7402: current->flags |= PF_NOFREEZE;
kernel/sched/core.c-7403-
--
kernel/sched/core.c=7412=static inline void sched_submit_work(struct task_struct *tsk)
--
kernel/sched/core.c-7422-
kernel/sched/core.c:7423: task_flags = tsk->flags;
kernel/sched/core.c-7424- /*
--
kernel/sched/core.c=7449=static void sched_update_worker(struct task_struct *tsk)
kernel/sched/core.c-7450-{
kernel/sched/core.c:7451: if (tsk->flags & (PF_WQ_WORKER | PF_IO_WORKER)) {
kernel/sched/core.c:7452: if (tsk->flags & PF_WQ_WORKER)
kernel/sched/core.c-7453- wq_worker_running(tsk);
--
kernel/sched/core.c=7718=void rt_mutex_futex_pre_schedule(void)
kernel/sched/core.c-7719-{
kernel/sched/core.c:7720: lockdep_assert(!(current->flags & (PF_WQ_WORKER | PF_IO_WORKER)));
kernel/sched/core.c-7721- lockdep_assert(!current->plug);
--
kernel/sched/core.c=7753=void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task)
--
kernel/sched/core.c-7834- p->dl.pi_se = pi_task->dl.pi_se;
kernel/sched/core.c:7835: scope->flags |= ENQUEUE_REPLENISH;
kernel/sched/core.c-7836- } else {
--
kernel/sched/core.c-7842- if (oldprio < prio)
kernel/sched/core.c:7843: scope->flags |= ENQUEUE_HEAD;
kernel/sched/core.c-7844- } else {
--
kernel/sched/core.c=8155=void sched_show_task(struct task_struct *p)
--
kernel/sched/core.c-8174- free, task_pid_nr(p), task_tgid_nr(p),
kernel/sched/core.c:8175: ppid, p->flags, read_task_thread_flags(p));
kernel/sched/core.c-8176-
--
kernel/sched/core.c=8247=void __init init_idle(struct task_struct *idle, int cpu)
--
kernel/sched/core.c-8264- */
kernel/sched/core.c:8265: idle->flags |= PF_KTHREAD | PF_NO_SETAFFINITY;
kernel/sched/core.c-8266- kthread_set_per_cpu(idle, cpu);
--
kernel/sched/core.c=8320=int task_can_attach(struct task_struct *p)
--
kernel/sched/core.c-8332- */
kernel/sched/core.c:8333: if (p->flags & PF_NO_SETAFFINITY)
kernel/sched/core.c-8334- ret = -EINVAL;
--
kernel/sched/core.c=8861=void __init sched_init_smp(void)
--
kernel/sched/core.c-8878- BUG();
kernel/sched/core.c:8879: current->flags &= ~PF_NO_SETAFFINITY;
kernel/sched/core.c-8880- sched_init_granularity();
--
kernel/sched/core.c=9267=void normalize_rt_tasks(void)
--
kernel/sched/core.c-9278- */
kernel/sched/core.c:9279: if (p->flags & PF_KTHREAD)
kernel/sched/core.c-9280- continue;
--
kernel/sched/core.c=11240=void sched_change_end(struct sched_change_ctx *ctx)
--
kernel/sched/core.c-11249- */
kernel/sched/core.c:11250: WARN_ON_ONCE(p->sched_class != ctx->class && !(ctx->flags & ENQUEUE_CLASS));
kernel/sched/core.c-11251-
kernel/sched/core.c:11252: if ((ctx->flags & ENQUEUE_CLASS) && p->sched_class->switching_to)
kernel/sched/core.c-11253- p->sched_class->switching_to(rq, p);
--
kernel/sched/core.c-11255- if (ctx->queued)
kernel/sched/core.c:11256: enqueue_task(rq, p, ctx->flags);
kernel/sched/core.c-11257- if (ctx->running)
--
kernel/sched/core.c-11259-
kernel/sched/core.c:11260: if (ctx->flags & ENQUEUE_CLASS) {
kernel/sched/core.c-11261- if (p->sched_class->switched_to)
--
kernel/sched/cputime.c=192=void account_system_time(struct task_struct *p, int hardirq_offset, u64 cputime)
--
kernel/sched/cputime.c-195-
kernel/sched/cputime.c:196: if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0)) {
kernel/sched/cputime.c-197- account_guest_time(p, cputime);
--
kernel/sched/cputime.c=382=static void irqtime_account_process_tick(struct task_struct *p, int user_tick,
--
kernel/sched/cputime.c-410- account_idle_time(cputime);
kernel/sched/cputime.c:411: } else if (p->flags & PF_VCPU) { /* System time or guest time */
kernel/sched/cputime.c-412- account_guest_time(p, cputime);
--
kernel/sched/cputime.c=960=void vtime_guest_enter(struct task_struct *tsk)
--
kernel/sched/cputime.c-971- vtime_account_system(tsk, vtime);
kernel/sched/cputime.c:972: tsk->flags |= PF_VCPU;
kernel/sched/cputime.c-973- vtime->state = VTIME_GUEST;
--
kernel/sched/cputime.c=978=void vtime_guest_exit(struct task_struct *tsk)
--
kernel/sched/cputime.c-983- vtime_account_guest(tsk, vtime);
kernel/sched/cputime.c:984: tsk->flags &= ~PF_VCPU;
kernel/sched/cputime.c-985- vtime->state = VTIME_SYS;
--
kernel/sched/cputime.c=995=void vtime_task_switch_generic(struct task_struct *prev)
--
kernel/sched/cputime.c-1012- vtime->state = VTIME_IDLE;
kernel/sched/cputime.c:1013: else if (current->flags & PF_VCPU)
kernel/sched/cputime.c-1014- vtime->state = VTIME_GUEST;
--
kernel/sched/deadline.c=1389=s64 dl_scaled_delta_exec(struct rq *rq, struct sched_dl_entity *dl_se, s64 delta_exec)
--
]
|
| 121/2 |
2026/11/18 23:52 |
llm |
expert |
0m
Model:
Tokens:
input: 95245
output: 36
thoughts: 628
Thoughts: **Analyzing a Memory Read Issue in the Kernel**
Okay, so I'm looking at this memory read and trying to figure out what's going on. The report says task 3283 on CPU 1 is reading 4 bytes from address `0xffff888104b4116c`. I need to understand the timing and the context. My first instinct is to look at the scheduler. I'm drawn to `kernel/sched/core.c`.
I see `sched_submit_work()` on line 7423. It reads `tsk->flags`. Then, on line 7451, `sched_update_worker()` also checks `tsk->flags` using a bitwise AND. Also I see that `sched_tick()` can read `curr->flags`.
Aha! `sched_tick()` is called from the timer interrupt. But what is `curr` in `sched_tick()`? It's the currently running task, `rq->curr`. So if the timer interrupt fires while task 3283 is in `delay_access` on CPU 1, that could be relevant. But wait, `sched_tick` runs in interrupt context, so I'm not sure if it could explain the read.
Then I realize, what if task 3283 *was* preempted? I go back and look at the `delay_tsc()` function. There's `preempt_enable()`, followed by `native_pause()`, then `preempt_disable()`. This is key! I check, and it's confirmed that `preempt_count_dec_and_test()` is TRUE. It was 1, now 0, the check passed! This means `__preempt_schedule()` is called, and this is in TASK CONTEXT!
Now, the lightbulb goes off! Because `__preempt_schedule()` is in task context, and calls `schedule()`. In `schedule()`, I see that `sched_submit_work(tsk)` is called, which, as I noted, reads `tsk->flags`. It also calls `sched_update_worker()`, which *also* accesses `tsk->flags`.
So, it's very likely the reported read is the *scheduler* reading the task's flags when task 3283 was preempted. `__preempt_schedule` calls `schedule()` which leads to the memory access! I should check `__schedule` in `kernel/sched/core.c` for more confirmation.
|
| 122/2 |
2026/11/18 23:52 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:7210 LineCount:60]
Results: map[Contents:7210: */
7211: static void __sched notrace __schedule(int sched_mode)
7212: {
7213: struct task_struct *prev, *next;
7214: /*
7215: * On PREEMPT_RT kernel, SM_RTLOCK_WAIT is noted
7216: * as a preemption by schedule_debug() and RCU.
7217: */
7218: bool preempt = sched_mode > SM_NONE;
7219: bool is_switch = false;
7220: unsigned long *switch_count;
7221: unsigned long prev_state;
7222: struct rq_flags rf;
7223: struct rq *rq;
7224: int cpu;
7225:
7226: /* Trace preemptions consistently with task switches */
7227: trace_sched_entry_tp(sched_mode == SM_PREEMPT);
7228:
7229: cpu = smp_processor_id();
7230: rq = cpu_rq(cpu);
7231: prev = rq->curr;
7232:
7233: schedule_debug(prev, preempt);
7234:
7235: klp_sched_try_switch(prev);
7236:
7237: local_irq_disable();
7238: rcu_note_context_switch(preempt);
7239: migrate_disable_switch(rq, prev);
7240:
7241: /*
7242: * Make sure that signal_pending_state()->signal_pending() below
7243: * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE)
7244: * done by the caller to avoid the race with signal_wake_up():
7245: *
7246: * __set_current_state(@state) signal_wake_up()
7247: * schedule() set_tsk_thread_flag(p, TIF_SIGPENDING)
7248: * wake_up_state(p, state)
7249: * LOCK rq->lock LOCK p->pi_state
7250: * smp_mb__after_spinlock() smp_mb__after_spinlock()
7251: * if (signal_pending_state()) if (p->state & @state)
7252: *
7253: * Also, the membarrier system call requires a full memory barrier
7254: * after coming from user-space, before storing to rq->curr; this
7255: * barrier matches a full barrier in the proximity of the membarrier
7256: * system call exit.
7257: */
7258: rq_lock(rq, &rf);
7259: smp_mb__after_spinlock();
7260:
7261: hrtick_schedule_enter(rq);
7262:
7263: /* Promote REQ to ACT */
7264: rq->clock_update_flags <<= 1;
7265: update_rq_clock(rq);
7266: rq->clock_update_flags = RQCF_UPDATED;
7267:
7268: switch_count = &prev->nivcsw;
7269:
]
|
| 123/2 |
2026/11/18 23:52 |
llm |
expert |
0m
Model:
Tokens:
input: 97381
output: 31
thoughts: 47
Thoughts: Okay, let's see. My first thought is: **Decoding the Scheduling Puzzle**
Wait a minute, hold on! I need to quickly glance at `__schedule`. Ah, it's marked as `notrace`. That's important. And it's `__schedule` so I need to make sure the scheduler is running smoothly. Is the `kernel/sched/core.c` file instrumented with KCSAN? I need to check it and make sure it is not the source of the issue. Alright, let's just make sure KCSAN is or isn't messing with what I'm expecting. Let's dig into `kernel/sched/Makefile` real quick to verify. This will likely provide clues about build-time configurations and instrumentation settings.
|
| 124/2 |
2026/11/18 23:52 |
tool |
read-file |
0m
Args: map[File:kernel/sched/Makefile FirstLine:1 LineCount:40]
Results: map[Contents: 1: # SPDX-License-Identifier: GPL-2.0
2:
3: CONTEXT_ANALYSIS_core.o := y
4: CONTEXT_ANALYSIS_fair.o := y
5:
6: # The compilers are complaining about unused variables inside an if(0) scope
7: # block. This is daft, shut them up.
8: ccflags-y += $(call cc-disable-warning, unused-but-set-variable)
9:
10: # These files are disabled because they produce non-interesting flaky coverage
11: # that is not a function of syscall inputs. E.g. involuntary context switches.
12: KCOV_INSTRUMENT := n
13:
14: # Disable KCSAN to avoid excessive noise and performance degradation. To avoid
15: # false positives ensure barriers implied by sched functions are instrumented.
16: KCSAN_SANITIZE := n
17: KCSAN_INSTRUMENT_BARRIERS := y
18:
19: ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
20: # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
21: # needed for x86 only. Why this used to be enabled for all architectures is beyond
22: # me. I suspect most platforms don't need this, but until we know that for sure
23: # I turn this off for IA-64 only. Andreas Schwab says it's also needed on m68k
24: # to get a correct value for the wait-channel (WCHAN in ps). --davidm
25: CFLAGS_core.o := $(PROFILING) -fno-omit-frame-pointer
26: endif
27:
28: # Branch profiling isn't noinstr-safe
29: ifdef CONFIG_TRACE_BRANCH_PROFILING
30: CFLAGS_build_policy.o += -DDISABLE_BRANCH_PROFILING
31: CFLAGS_build_utility.o += -DDISABLE_BRANCH_PROFILING
32: endif
33: #
34: # Build efficiency:
35: #
36: # These compilation units have roughly the same size and complexity - so their
37: # build parallelizes well and finishes roughly at once:
38: #
39: obj-y += core.o
40: obj-y += fair.o
]
|
| 125/2 |
2026/11/18 23:52 |
llm |
expert |
0m
Model:
Tokens:
input: 98289
output: 25
thoughts: 245
Thoughts: **Debugging a KCSAN False Positive**
Okay, so I'm looking at this KCSAN report and the noise is just killing me. Line 16 is key: it tells me that KCSAN is disabled to avoid excessive noise and performance problems. Right, so `KCSAN_SANITIZE := n`! I see it's specifically disabled in `kernel/sched/`, which is a common area for this kind of thing, but that should mean *no* instrumentation there. This seems counter-intuitive.
So, if the read didn't happen in `kernel/sched/`, where the heck *did* it come from? Could it be another file that doesn't have `KCSAN_SANITIZE := n`? And why is the function name reported as `0x0`? That's really weird. No stack trace either... I need to figure out why this happened.
Okay, first, I need to check the cases when `ip == 0` or when `stack_trace_save` returns 0. I have to understand why KCSAN would report `0x0`. I am sure there is an explanation.
Let's dig into the git history. I'm going to search for any commits that mention "data-race in 0x0" or "0x0 /". `git log` is my friend here. It's time to sift through the commits and see if I can find a relevant clue. There has to be a trace, right?
|
| 126/2 |
2026/11/18 23:53 |
tool |
git-log |
0m
Args: map[Count:5 MessageRegexps:[0x0 /]]
Results: map[Output:9f079dda1433 nvme: allow passthru cmd error logging
13b3d6bdbeb4 drm/amd/display: add debugfs disallow edp psr
78288665b5d0 nvme: set non-mdts limits in nvme_scan_work
f62e31623d71 csky: Support dynamic start physical address
ddc665a4bb4b bpf, arm64: fix jit branch offset related to ldimm64
]
|
| 127/2 |
2026/11/18 23:53 |
llm |
expert |
0m
Model:
Tokens:
input: 99017
output: 252
thoughts: 51
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience like yourself:
**Debugging Strategy Evaluation**
Alright, initial scan of the landscape... none of those leads are pointing toward KCSAN. Hmm, time to pivot. Let's see what CodeExpert has to offer. Given my current line of questioning, I'm going to feed CodeExpert some specific queries to determine if it has any insight into KCSAN reports which exhibit `0x0` values, or possible data races stemming from the manipulation of `current->flags |= PF_SUPERPRIV`. I'm hoping it's got something insightful, but I'm prepared for a dead end.
|
| 128/2 |
2026/11/18 23:53 |
tool |
codeexpert |
38m
Args: map[Question:In a KCSAN report:
BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid
read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
read-write to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
ns_capable_common kernel/capability.c:343 [inline]
ns_capable kernel/capability.c:362 [inline]
capable_wrt_inode_uidgid+0xa2/0x190 kernel/capability.c:495
...
How can KCSAN produce a report where the other access is on the same task and cpu (task 3283 on cpu 1) with function 0x0 and an empty stack trace? What mechanism in KCSAN causes this? And is this data race on current->flags |= PF_SUPERPRIV benign or harmful?]
Results: map[Answer:### 1. How KCSAN Produces a Report on the Same Task and CPU with Function 0x0 and an Empty Stack Trace
In standard operation, KCSAN monitors concurrent accesses from different threads/CPUs. However, a report can show both accesses occurring on the same task and CPU (`task 3283 on cpu 1`), with the conflicting access having an empty stack trace and function `0x0`:
1. **Watchpoint Setup by Task 3283:**
- Task 3283 executes `capable_wrt_inode_uidgid()` -> `ns_capable()` -> `ns_capable_common()`.
- At `kernel/capability.c:343`, it executes `current->flags |= PF_SUPERPRIV;`.
- Because `current->flags` is accessed non-atomically via a compound read-modify-write (`read-write`), KCSAN's instrumentation sets up a watchpoint on `¤t->flags` (`0xffff888104b4116c`) in `kcsan_setup_watchpoint()`.
- Task 3283 enters a busy delay loop in `delay_access()` (`udelay()`) to wait for potential concurrent accesses.
2. **Interruption / Preemption on the Same CPU:**
- While task 3283 is delayed inside `kcsan_setup_watchpoint()`, an interrupt (such as a timer tick) occurs on CPU 1.
- If kernel preemption (`CONFIG_PREEMPT` / `CONFIG_PREEMPTION`) is enabled, the return-from-interrupt path triggers preemption (`preempt_schedule_irq()`), invoking the scheduler (`schedule()`).
- The scheduler runs in task context (`in_task()` is true) on CPU 1 while `current` is still task 3283.
- During scheduling or context switching, the scheduler reads `current->flags` (e.g., checking flags like `PF_KTHREAD`, `PF_IDLE`, etc.).
3. **Triggering and Consuming the Watchpoint:**
- The scheduler's read of `current->flags` hits the active watchpoint previously inserted by task 3283 for the exact same address (`0xffff888104b4116c`).
- `kcsan_found_watchpoint()` detects the match and consumes the watchpoint, recording `other_info` with `task_pid = 3283`, `cpu_id = 1`, and `access_type = read`.
4. **Why Function `0x0` and Empty Stack Trace:**
- In `prepare_report_producer()`, KCSAN calls `stack_trace_save()` to record the call stack of the conflicting access.
- In low-level scheduler code, assembly entry/exit trampolines, or unwinder-unfriendly preemption transitions, stack unwinding (e.g., via ORC or frame pointers) can fail and return 0 frames. Alternatively, if frames consist entirely of runtime/scheduler functions that are skipped by `get_stack_skipnr()`, `num_stack_entries` effectively becomes 0.
- When `num_stack_entries` is 0:
- `print_stack_trace()` prints no lines (an empty stack trace).
- The top frame address defaults to `0` (`0x0`).
- KCSAN formats the report title using `%ps` on the top frames, resulting in:
`BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid`.
---
### 2. What Mechanism in KCSAN Causes This
This behavior is caused by **`CONFIG_KCSAN_INTERRUPT_WATCHER=y`** (or the boot parameter **`kcsan.interrupt_watcher=1`**):
- By default, KCSAN disables local interrupts via `local_irq_save()` while a watchpoint is active in `kcsan_setup_watchpoint()`. This is done specifically to prevent reporting false positive or misleading data races on thread-local or CPU-local variables caused by interrupts or preemption on the same CPU.
- When `CONFIG_KCSAN_INTERRUPT_WATCHER` is enabled, KCSAN leaves interrupts enabled during watchpoint delays. This allows interrupts and subsequent kernel preemption on the same CPU while the watchpoint is held, enabling KCSAN to detect races between interrupted tasks and subsequent execution contexts on the same CPU.
---
### 3. Is the Data Race on `current->flags |= PF_SUPERPRIV` Benign or Harmful?
This data race is **benign**:
1. **Purpose of `PF_SUPERPRIV`:**
`PF_SUPERPRIV` ("used superuser privileges") is purely an accounting flag, primarily read by BSD process accounting (`kernel/acct.c`) when a process exits (`acct_process()`). It does not affect security decisions, capability permissions, or task execution flow.
2. **Single-Writer Invariant:**
`current->flags` is strictly modified by the task itself in task context. No other CPU, task, or interrupt handler writes to `task->flags` concurrently. Therefore, the non-atomic compound read-modify-write (`|=`) will never suffer from lost updates or clobbered bits due to concurrent writes.
3. **Single-Copy Atomicity:**
On all supported modern architectures (x86, ARM64, etc.), aligned 32-bit reads and writes are single-copy atomic. Any concurrent reader (such as the scheduler or `/proc` inspection) will atomically observe either the old flag value or the new value with `PF_SUPERPRIV` set, without word tearing or corrupted values.
---
### Caveats and Unverified Parts
- The exact stack unwinder behavior (whether ORC unwinder stopped at the interrupt/scheduler boundary or all frames were filtered by `get_stack_skipnr`) depends on compiler and architecture configuration, but both lead to the observed 0-entry stack trace and `0x0` symbol.]
|
| 129/3 |
2026/11/18 23:53 |
agent |
codeexpert |
38m
Model:
Results: map[Answer:### 1. How KCSAN Produces a Report on the Same Task and CPU with Function 0x0 and an Empty Stack Trace
In standard operation, KCSAN monitors concurrent accesses from different threads/CPUs. However, a report can show both accesses occurring on the same task and CPU (`task 3283 on cpu 1`), with the conflicting access having an empty stack trace and function `0x0`:
1. **Watchpoint Setup by Task 3283:**
- Task 3283 executes `capable_wrt_inode_uidgid()` -> `ns_capable()` -> `ns_capable_common()`.
- At `kernel/capability.c:343`, it executes `current->flags |= PF_SUPERPRIV;`.
- Because `current->flags` is accessed non-atomically via a compound read-modify-write (`read-write`), KCSAN's instrumentation sets up a watchpoint on `¤t->flags` (`0xffff888104b4116c`) in `kcsan_setup_watchpoint()`.
- Task 3283 enters a busy delay loop in `delay_access()` (`udelay()`) to wait for potential concurrent accesses.
2. **Interruption / Preemption on the Same CPU:**
- While task 3283 is delayed inside `kcsan_setup_watchpoint()`, an interrupt (such as a timer tick) occurs on CPU 1.
- If kernel preemption (`CONFIG_PREEMPT` / `CONFIG_PREEMPTION`) is enabled, the return-from-interrupt path triggers preemption (`preempt_schedule_irq()`), invoking the scheduler (`schedule()`).
- The scheduler runs in task context (`in_task()` is true) on CPU 1 while `current` is still task 3283.
- During scheduling or context switching, the scheduler reads `current->flags` (e.g., checking flags like `PF_KTHREAD`, `PF_IDLE`, etc.).
3. **Triggering and Consuming the Watchpoint:**
- The scheduler's read of `current->flags` hits the active watchpoint previously inserted by task 3283 for the exact same address (`0xffff888104b4116c`).
- `kcsan_found_watchpoint()` detects the match and consumes the watchpoint, recording `other_info` with `task_pid = 3283`, `cpu_id = 1`, and `access_type = read`.
4. **Why Function `0x0` and Empty Stack Trace:**
- In `prepare_report_producer()`, KCSAN calls `stack_trace_save()` to record the call stack of the conflicting access.
- In low-level scheduler code, assembly entry/exit trampolines, or unwinder-unfriendly preemption transitions, stack unwinding (e.g., via ORC or frame pointers) can fail and return 0 frames. Alternatively, if frames consist entirely of runtime/scheduler functions that are skipped by `get_stack_skipnr()`, `num_stack_entries` effectively becomes 0.
- When `num_stack_entries` is 0:
- `print_stack_trace()` prints no lines (an empty stack trace).
- The top frame address defaults to `0` (`0x0`).
- KCSAN formats the report title using `%ps` on the top frames, resulting in:
`BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid`.
---
### 2. What Mechanism in KCSAN Causes This
This behavior is caused by **`CONFIG_KCSAN_INTERRUPT_WATCHER=y`** (or the boot parameter **`kcsan.interrupt_watcher=1`**):
- By default, KCSAN disables local interrupts via `local_irq_save()` while a watchpoint is active in `kcsan_setup_watchpoint()`. This is done specifically to prevent reporting false positive or misleading data races on thread-local or CPU-local variables caused by interrupts or preemption on the same CPU.
- When `CONFIG_KCSAN_INTERRUPT_WATCHER` is enabled, KCSAN leaves interrupts enabled during watchpoint delays. This allows interrupts and subsequent kernel preemption on the same CPU while the watchpoint is held, enabling KCSAN to detect races between interrupted tasks and subsequent execution contexts on the same CPU.
---
### 3. Is the Data Race on `current->flags |= PF_SUPERPRIV` Benign or Harmful?
This data race is **benign**:
1. **Purpose of `PF_SUPERPRIV`:**
`PF_SUPERPRIV` ("used superuser privileges") is purely an accounting flag, primarily read by BSD process accounting (`kernel/acct.c`) when a process exits (`acct_process()`). It does not affect security decisions, capability permissions, or task execution flow.
2. **Single-Writer Invariant:**
`current->flags` is strictly modified by the task itself in task context. No other CPU, task, or interrupt handler writes to `task->flags` concurrently. Therefore, the non-atomic compound read-modify-write (`|=`) will never suffer from lost updates or clobbered bits due to concurrent writes.
3. **Single-Copy Atomicity:**
On all supported modern architectures (x86, ARM64, etc.), aligned 32-bit reads and writes are single-copy atomic. Any concurrent reader (such as the scheduler or `/proc` inspection) will atomically observe either the old flag value or the new value with `PF_SUPERPRIV` set, without word tearing or corrupted values.
---
### Caveats and Unverified Parts
- The exact stack unwinder behavior (whether ORC unwinder stopped at the interrupt/scheduler boundary or all frames were filtered by `get_stack_skipnr`) depends on compiler and architecture configuration, but both lead to the observed 0-entry stack trace and `0x0` symbol.]
Instruction:
You are a capable Linux kernel developer tasked with researching complex questions
about kernel source code. You will be given a concrete question, and need to provide
a concrete answer.
Research the question using targeted, efficient tool calls. Don't make assumptions,
or rely on your previous knowledge about the kernel source code, use available tools
to access the actual source code. Keep your tool calls focused and limited to the
scope of the question. Do not explore tangential code paths or perform unbounded searches.
Use all available sources of information:
- kernel source code
- documentation in the Documentation dir in the source tree
- git commits descriptions, git blame
Do not guess file names or file paths and attempt to read them without
verifying their existence first using content search or directory listing tools.
If a file, symbol, or directory is not found via content search (grepper) or
directory listing (codesearch-dir-index), treat it as completely absent.
Do not attempt to guess alternative names, extensions, or directories.
Tool Selection Guidelines:
1. For C functions, structs, and variables: Prefer codesearch-definition-source
or codesearch-struct-layout FIRST to retrieve clean, exact definitions
without line-number guessing.
2. If symbol lookup fails (e.g., preprocessor macros, macro-generated code, or
disabled #ifdef branches), fall back to read-file or grepper.
3. For file headers, #include directives, preprocessor macro definitions, and
non-C files (Kconfig, Makefiles, docs): Use read-file or grepper directly.
4. Be concise and targeted. Answer the question as directly and concisely as possible
once you have located the relevant code or definitions. If a symbol or function cannot
be found after targeted searches, conclude with the best available information rather
than continuing repetitive searches.
Do NOT use git-log to search for the presence or existence of files in the
repository. git-log is only for tracing commit history of files that are
already present in the current checkout. If a file does not exist in the
current checkout, it cannot be used for reproduction.
Avoid running broad git-log queries (such as searches on the entire repo)
without a specific 'PathPrefix' to restrict the scope, as these are very
expensive and will time out.
If a git-log tool call times out, do not retry the query with the same broad
scope. You must specify a tighter, narrower 'PathPrefix' for subsequent queries.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: In a KCSAN report:
BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid
read to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
read-write to 0xffff888104b4116c of 4 bytes by task 3283 on cpu 1:
ns_capable_common kernel/capability.c:343 [inline]
ns_capable kernel/capability.c:362 [inline]
capable_wrt_inode_uidgid+0xa2/0x190 kernel/capability.c:495
...
How can KCSAN produce a report where the other access is on the same task and cpu (task 3283 on cpu 1) with function 0x0 and an empty stack trace? What mechanism in KCSAN causes this? And is this data race on current->flags |= PF_SUPERPRIV benign or harmful?
|
| 130/4 |
2026/11/18 23:53 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 4523
output: 23
thoughts: 409
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, let's break down this KCSAN report. This is a perplexing one. I need to understand why KCSAN is reporting a data race where both accesses happen on the same task and CPU, and with function 0x0 and an empty stack trace. That's unusual. The report reads: "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid." Then there is a read and a read-write from task 3283 on CPU 1.
The question really boils down to three core aspects: first, how can KCSAN generate this type of report? Second, what's the KCSAN mechanism behind it? And finally, what's the impact of this potentially data-racy `current->flags |= PF_SUPERPRIV`?
Right, time to dive into the kernel code. Where does KCSAN live? I need to look in `kernel/kcsan/`, `include/linux/kcsan*.h`, and also `Documentation/dev-tools/kcsan.rst`. I'll start with the code within `kernel/kcsan/`, as that seems like the most relevant place to begin. My goal is to understand how KCSAN detects these data races in the first place, and then to figure out how it handles these reports. I need to understand this mechanism in depth.
|
| 131/4 |
2026/11/18 23:54 |
tool |
codesearch-dir-index |
0m
Args:
Results: map[Files:[core.c debugfs.c encoding.h kcsan.h kcsan_test.c permissive.h report.c selftest.c] Subdirs:<nil>]
|
| 132/4 |
2026/11/18 23:54 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 5335
output: 82
thoughts: 106
Thoughts: **Investigating KCSAN Reporting Anomalies**
Okay, so I'm diving into this KCSAN issue. My initial thought is to zero in on specific clues: commits, documentation, or code within the `kernel/kcsan/` directory that are related to `0x0`, empty stack traces, value changes, or watchpoints. That seems like a logical first approach.
Wait, hold on a second... before I get too deep into that, it makes more sense to start with the core reporting mechanisms. I should probably check `kernel/kcsan/report.c`, `kernel/kcsan/core.c`, and the KCSAN documentation (`Documentation/dev-tools/kcsan.rst`) for those core components first. These are likely to give me the most context.
After reviewing those files, I should then shift my focus to how the reports are printed or logged. I'll need to figure out where and how that's handled. I'll start with a `grep` for relevant functions, maybe printing related strings and then, if necessary, I'll switch to using `git log` to review the change history within `kernel/kcsan/` and Documentation.
|
| 133/4 |
2026/11/18 23:55 |
tool |
grepper |
0m
Args: map[Expression:data-race in PathPrefixes:[kernel/kcsan Documentation/dev-tools/kcsan.rst]]
Results: map[Output:Documentation/dev-tools/kcsan.rst=27=A typical data race report looks like this::
--
Documentation/dev-tools/kcsan.rst-29- ==================================================================
Documentation/dev-tools/kcsan.rst:30: BUG: KCSAN: data-race in test_kernel_read / test_kernel_write
Documentation/dev-tools/kcsan.rst-31-
--
Documentation/dev-tools/kcsan.rst=56=The other less common type of data race report looks like this::
--
Documentation/dev-tools/kcsan.rst-58- ==================================================================
Documentation/dev-tools/kcsan.rst:59: BUG: KCSAN: data-race in test_kernel_rmw_array+0x71/0xd0
Documentation/dev-tools/kcsan.rst-60-
]
|
| 134/4 |
2026/11/18 23:55 |
tool |
read-file |
0m
Args: map[File:Documentation/dev-tools/kcsan.rst FirstLine:1 LineCount:100]
Results: map[Contents: 1: .. SPDX-License-Identifier: GPL-2.0
2: .. Copyright (C) 2019, Google LLC.
3:
4: Kernel Concurrency Sanitizer (KCSAN)
5: ====================================
6:
7: The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which
8: relies on compile-time instrumentation, and uses a watchpoint-based sampling
9: approach to detect races. KCSAN's primary purpose is to detect `data races`_.
10:
11: Usage
12: -----
13:
14: KCSAN is supported by both GCC and Clang. With GCC we require version 11 or
15: later, and with Clang also require version 11 or later.
16:
17: To enable KCSAN configure the kernel with::
18:
19: CONFIG_KCSAN = y
20:
21: KCSAN provides several other configuration options to customize behaviour (see
22: the respective help text in ``lib/Kconfig.kcsan`` for more info).
23:
24: Error reports
25: ~~~~~~~~~~~~~
26:
27: A typical data race report looks like this::
28:
29: ==================================================================
30: BUG: KCSAN: data-race in test_kernel_read / test_kernel_write
31:
32: write to 0xffffffffc009a628 of 8 bytes by task 487 on cpu 0:
33: test_kernel_write+0x1d/0x30
34: access_thread+0x89/0xd0
35: kthread+0x23e/0x260
36: ret_from_fork+0x22/0x30
37:
38: read to 0xffffffffc009a628 of 8 bytes by task 488 on cpu 6:
39: test_kernel_read+0x10/0x20
40: access_thread+0x89/0xd0
41: kthread+0x23e/0x260
42: ret_from_fork+0x22/0x30
43:
44: value changed: 0x00000000000009a6 -> 0x00000000000009b2
45:
46: Reported by Kernel Concurrency Sanitizer on:
47: CPU: 6 PID: 488 Comm: access_thread Not tainted 5.12.0-rc2+ #1
48: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
49: ==================================================================
50:
51: The header of the report provides a short summary of the functions involved in
52: the race. It is followed by the access types and stack traces of the 2 threads
53: involved in the data race. If KCSAN also observed a value change, the observed
54: old value and new value are shown on the "value changed" line respectively.
55:
56: The other less common type of data race report looks like this::
57:
58: ==================================================================
59: BUG: KCSAN: data-race in test_kernel_rmw_array+0x71/0xd0
60:
61: race at unknown origin, with read to 0xffffffffc009bdb0 of 8 bytes by task 515 on cpu 2:
62: test_kernel_rmw_array+0x71/0xd0
63: access_thread+0x89/0xd0
64: kthread+0x23e/0x260
65: ret_from_fork+0x22/0x30
66:
67: value changed: 0x0000000000002328 -> 0x0000000000002329
68:
69: Reported by Kernel Concurrency Sanitizer on:
70: CPU: 2 PID: 515 Comm: access_thread Not tainted 5.12.0-rc2+ #1
71: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
72: ==================================================================
73:
74: This report is generated where it was not possible to determine the other
75: racing thread, but a race was inferred due to the data value of the watched
76: memory location having changed. These reports always show a "value changed"
77: line. A common reason for reports of this type are missing instrumentation in
78: the racing thread, but could also occur due to e.g. DMA accesses. Such reports
79: are shown only if ``CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=y``, which is
80: enabled by default.
81:
82: Selective analysis
83: ~~~~~~~~~~~~~~~~~~
84:
85: It may be desirable to disable data race detection for specific accesses,
86: functions, compilation units, or entire subsystems. For static blacklisting,
87: the below options are available:
88:
89: * KCSAN understands the ``data_race(expr)`` annotation, which tells KCSAN that
90: any data races due to accesses in ``expr`` should be ignored and resulting
91: behaviour when encountering a data race is deemed safe. Please see
92: `"Marking Shared-Memory Accesses" in the LKMM`_ for more information.
93:
94: * Similar to ``data_race(...)``, the type qualifier ``__data_racy`` can be used
95: to document that all data races due to accesses to a variable are intended
96: and should be ignored by KCSAN::
97:
98: struct foo {
99: ...
100: int __data_racy stats_counter;
]
|
| 135/4 |
2026/11/18 23:55 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 7783
output: 36
thoughts: 43
Thoughts: Here's my analysis of the provided thought process, tailored for an expert audience:
**Analyzing KCSAN Reporting Mechanisms**
Okay, so the goal is clear: Dive into the heart of KCSAN's reporting architecture. My initial thought process involves a focused investigation. I want to understand exactly how those KCSAN reports are generated and presented. This means dissecting the code, especially focusing on `kernel/kcsan/report.c` and `kernel/kcsan/core.c`. I'm going to be looking for the crucial functions and data structures that handle report creation. This includes understanding the formatting specifics of these reports, and ultimately, how they are finally outputted to the user. I'm thinking about the level of detail they provide. Are they verbose? Concise? How can I correlate report elements to underlying KCSAN instrumentation? I need to build a mental map of the entire reporting pathway, from the detection of a potential race condition or use-after-free, to the final display.
|
| 136/4 |
2026/11/18 23:56 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:1 LineCount:100]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0
2: /*
3: * KCSAN reporting.
4: *
5: * Copyright (C) 2019, Google LLC.
6: */
7:
8: #include <linux/debug_locks.h>
9: #include <linux/delay.h>
10: #include <linux/jiffies.h>
11: #include <linux/kallsyms.h>
12: #include <linux/kernel.h>
13: #include <linux/lockdep.h>
14: #include <linux/preempt.h>
15: #include <linux/printk.h>
16: #include <linux/sched.h>
17: #include <linux/spinlock.h>
18: #include <linux/stacktrace.h>
19:
20: #include "kcsan.h"
21: #include "encoding.h"
22:
23: /*
24: * Max. number of stack entries to show in the report.
25: */
26: #define NUM_STACK_ENTRIES 64
27:
28: /* Common access info. */
29: struct access_info {
30: const volatile void *ptr;
31: size_t size;
32: int access_type;
33: int task_pid;
34: int cpu_id;
35: unsigned long ip;
36: };
37:
38: /*
39: * Other thread info: communicated from other racing thread to thread that set
40: * up the watchpoint, which then prints the complete report atomically.
41: */
42: struct other_info {
43: struct access_info ai;
44: unsigned long stack_entries[NUM_STACK_ENTRIES];
45: int num_stack_entries;
46:
47: /*
48: * Optionally pass @current. Typically we do not need to pass @current
49: * via @other_info since just @task_pid is sufficient. Passing @current
50: * has additional overhead.
51: *
52: * To safely pass @current, we must either use get_task_struct/
53: * put_task_struct, or stall the thread that populated @other_info.
54: *
55: * We cannot rely on get_task_struct/put_task_struct in case
56: * release_report() races with a task being released, and would have to
57: * free it in release_report(). This may result in deadlock if we want
58: * to use KCSAN on the allocators.
59: *
60: * Since we also want to reliably print held locks for
61: * CONFIG_KCSAN_VERBOSE, the current implementation stalls the thread
62: * that populated @other_info until it has been consumed.
63: */
64: struct task_struct *task;
65: };
66:
67: /*
68: * To never block any producers of struct other_info, we need as many elements
69: * as we have watchpoints (upper bound on concurrent races to report).
70: */
71: static struct other_info other_infos[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
72:
73: /*
74: * Information about reported races; used to rate limit reporting.
75: */
76: struct report_time {
77: /*
78: * The last time the race was reported.
79: */
80: unsigned long time;
81:
82: /*
83: * The frames of the 2 threads; if only 1 thread is known, one frame
84: * will be 0.
85: */
86: unsigned long frame1;
87: unsigned long frame2;
88: };
89:
90: /*
91: * Since we also want to be able to debug allocators with KCSAN, to avoid
92: * deadlock, report_times cannot be dynamically resized with krealloc in
93: * rate_limit_report.
94: *
95: * Therefore, we use a fixed-size array, which at most will occupy a page. This
96: * still adequately rate limits reports, assuming that a) number of unique data
97: * races is not excessive, and b) occurrence of unique races within the
98: * same time window is limited.
99: */
100: #define REPORT_TIMES_MAX (PAGE_SIZE / sizeof(struct report_time))
]
|
| 137/4 |
2026/11/18 23:56 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 9417
output: 38
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, rendered in the first person, as if I'm the one having these thoughts, targeting an expert audience:
**Diving into `kernel/kcsan/report.c`**
Alright, time to dig deeper. The investigation clearly points to `kernel/kcsan/report.c` as the next logical stop. I know this module intimately, but it's always good to refresh my memory, especially when troubleshooting. I'm focusing my attention there to see how the reports are constructed and if I can immediately identify any potential issues with the reporting logic, data formatting, or any race conditions within the reporting mechanism itself. I expect that a subtle bug there, could be causing the observed anomalous behavior. Maybe there's a problem with how the KCSan data is marshalled, or how it's sent upstream. I'll be looking for anything that might be introducing inconsistencies or corruption in the reported data, specifically related to the problematic scenarios the user is describing. I'll need to pay close attention to the lock interactions, memory barriers and any potentially shared data structures. This is where the magic happens, so let's see what's actually going on.
|
| 138/4 |
2026/11/18 23:58 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:101 LineCount:100]
Results: map[Contents: 101: #define REPORT_TIMES_SIZE \
102: (CONFIG_KCSAN_REPORT_ONCE_IN_MS > REPORT_TIMES_MAX ? \
103: REPORT_TIMES_MAX : \
104: CONFIG_KCSAN_REPORT_ONCE_IN_MS)
105: static struct report_time report_times[REPORT_TIMES_SIZE];
106:
107: /*
108: * Spinlock serializing report generation, and access to @other_infos. Although
109: * it could make sense to have a finer-grained locking story for @other_infos,
110: * report generation needs to be serialized either way, so not much is gained.
111: */
112: static DEFINE_RAW_SPINLOCK(report_lock);
113:
114: /*
115: * Checks if the race identified by thread frames frame1 and frame2 has
116: * been reported since (now - KCSAN_REPORT_ONCE_IN_MS).
117: */
118: static bool rate_limit_report(unsigned long frame1, unsigned long frame2)
119: __must_hold(&report_lock)
120: {
121: struct report_time *use_entry = &report_times[0];
122: unsigned long invalid_before;
123: int i;
124:
125: BUILD_BUG_ON(CONFIG_KCSAN_REPORT_ONCE_IN_MS != 0 && REPORT_TIMES_SIZE == 0);
126:
127: if (CONFIG_KCSAN_REPORT_ONCE_IN_MS == 0)
128: return false;
129:
130: invalid_before = jiffies - msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS);
131:
132: /* Check if a matching race report exists. */
133: for (i = 0; i < REPORT_TIMES_SIZE; ++i) {
134: struct report_time *rt = &report_times[i];
135:
136: /*
137: * Must always select an entry for use to store info as we
138: * cannot resize report_times; at the end of the scan, use_entry
139: * will be the oldest entry, which ideally also happened before
140: * KCSAN_REPORT_ONCE_IN_MS ago.
141: */
142: if (time_before(rt->time, use_entry->time))
143: use_entry = rt;
144:
145: /*
146: * Initially, no need to check any further as this entry as well
147: * as following entries have never been used.
148: */
149: if (rt->time == 0)
150: break;
151:
152: /* Check if entry expired. */
153: if (time_before(rt->time, invalid_before))
154: continue; /* before KCSAN_REPORT_ONCE_IN_MS ago */
155:
156: /* Reported recently, check if race matches. */
157: if ((rt->frame1 == frame1 && rt->frame2 == frame2) ||
158: (rt->frame1 == frame2 && rt->frame2 == frame1))
159: return true;
160: }
161:
162: use_entry->time = jiffies;
163: use_entry->frame1 = frame1;
164: use_entry->frame2 = frame2;
165: return false;
166: }
167:
168: /*
169: * Special rules to skip reporting.
170: */
171: static bool
172: skip_report(enum kcsan_value_change value_change, unsigned long top_frame)
173: {
174: /* Should never get here if value_change==FALSE. */
175: WARN_ON_ONCE(value_change == KCSAN_VALUE_CHANGE_FALSE);
176:
177: /*
178: * The first call to skip_report always has value_change==TRUE, since we
179: * cannot know the value written of an instrumented access. For the 2nd
180: * call there are 6 cases with CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY:
181: *
182: * 1. read watchpoint, conflicting write (value_change==TRUE): report;
183: * 2. read watchpoint, conflicting write (value_change==MAYBE): skip;
184: * 3. write watchpoint, conflicting write (value_change==TRUE): report;
185: * 4. write watchpoint, conflicting write (value_change==MAYBE): skip;
186: * 5. write watchpoint, conflicting read (value_change==MAYBE): skip;
187: * 6. write watchpoint, conflicting read (value_change==TRUE): report;
188: *
189: * Cases 1-4 are intuitive and expected; case 5 ensures we do not report
190: * data races where the write may have rewritten the same value; case 6
191: * is possible either if the size is larger than what we check value
192: * changes for or the access type is KCSAN_ACCESS_ASSERT.
193: */
194: if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) &&
195: value_change == KCSAN_VALUE_CHANGE_MAYBE) {
196: /*
197: * The access is a write, but the data value did not change.
198: *
199: * We opt-out of this filter for certain functions at request of
200: * maintainers.
]
|
| 139/4 |
2026/11/18 23:58 |
llm |
codeexpert |
2m
Model:
Tokens:
input: 11432
output: 38
thoughts: 16
Thoughts: Okay, here we go...
**Diving Back into the Kernel Concurrency Sanitizer Report Code**
Alright, back at it. Let's get right into it and keep working through the `kernel/kcsan/report.c` file. I'm hoping to get a clearer picture of how KCSAN is actually generating and presenting these concurrency violation reports. What specific data structures and functions are they using to capture all the relevant information β the memory addresses, the access types, the call stacks? I need to understand this implementation in detail to fully appreciate its strengths and weaknesses, especially in comparison to my own work on similar issues. I'm particularly interested in how they're handling false positives and negatives, what kind of performance impact the reporting process has, and if they've found any clever tricks to minimize overhead. I'm expecting to see some interesting design choices in here, and I'm ready to dig deep. Let's see what gems we can unearth.
|
| 140/4 |
2026/11/19 00:00 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:201 LineCount:100]
Results: map[Contents: 201: */
202: char buf[64];
203: int len = scnprintf(buf, sizeof(buf), "%ps", (void *)top_frame);
204:
205: if (!strnstr(buf, "rcu_", len) &&
206: !strnstr(buf, "_rcu", len) &&
207: !strnstr(buf, "_srcu", len))
208: return true;
209: }
210:
211: return kcsan_skip_report_debugfs(top_frame);
212: }
213:
214: static const char *get_access_type(int type)
215: {
216: if (type & KCSAN_ACCESS_ASSERT) {
217: if (type & KCSAN_ACCESS_SCOPED) {
218: if (type & KCSAN_ACCESS_WRITE)
219: return "assert no accesses (reordered)";
220: else
221: return "assert no writes (reordered)";
222: } else {
223: if (type & KCSAN_ACCESS_WRITE)
224: return "assert no accesses";
225: else
226: return "assert no writes";
227: }
228: }
229:
230: switch (type) {
231: case 0:
232: return "read";
233: case KCSAN_ACCESS_ATOMIC:
234: return "read (marked)";
235: case KCSAN_ACCESS_WRITE:
236: return "write";
237: case KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
238: return "write (marked)";
239: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
240: return "read-write";
241: case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
242: return "read-write (marked)";
243: case KCSAN_ACCESS_SCOPED:
244: return "read (reordered)";
245: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_ATOMIC:
246: return "read (marked, reordered)";
247: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE:
248: return "write (reordered)";
249: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
250: return "write (marked, reordered)";
251: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE:
252: return "read-write (reordered)";
253: case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
254: return "read-write (marked, reordered)";
255: default:
256: BUG();
257: }
258: }
259:
260: static const char *get_bug_type(int type)
261: {
262: return (type & KCSAN_ACCESS_ASSERT) != 0 ? "assert: race" : "data-race";
263: }
264:
265: /* Return thread description: in task or interrupt. */
266: static const char *get_thread_desc(int task_id)
267: {
268: if (task_id != -1) {
269: static char buf[32]; /* safe: protected by report_lock */
270:
271: snprintf(buf, sizeof(buf), "task %i", task_id);
272: return buf;
273: }
274: return "interrupt";
275: }
276:
277: /* Helper to skip KCSAN-related functions in stack-trace. */
278: static int get_stack_skipnr(const unsigned long stack_entries[], int num_entries)
279: {
280: char buf[64];
281: char *cur;
282: int len, skip;
283:
284: for (skip = 0; skip < num_entries; ++skip) {
285: len = scnprintf(buf, sizeof(buf), "%ps", (void *)stack_entries[skip]);
286:
287: /* Never show tsan_* or {read,write}_once_size. */
288: if (strnstr(buf, "tsan_", len) ||
289: strnstr(buf, "_once_size", len))
290: continue;
291:
292: cur = strnstr(buf, "kcsan_", len);
293: if (cur) {
294: cur += strlen("kcsan_");
295: if (!str_has_prefix(cur, "test"))
296: continue; /* KCSAN runtime function. */
297: /* KCSAN related test. */
298: }
299:
300: /*
]
|
| 141/4 |
2026/11/19 00:00 |
llm |
codeexpert |
2m
Model:
Tokens:
input: 13251
output: 38
thoughts: 16
Thoughts: Okay, here we go...
**Diving Back into the Kernel Concurrency Sanitizer Report Code**
Alright, back at it. Let's get right into it and keep working through the `kernel/kcsan/report.c` file. I'm hoping to get a clearer picture of how KCSAN is actually generating and presenting these concurrency violation reports. What specific data structures and functions are they using to capture all the relevant information β the memory addresses, the access types, the call stacks? I need to understand this implementation in detail to fully appreciate its strengths and weaknesses, especially in comparison to my own work on similar issues. I'm particularly interested in how they're handling false positives and negatives, what kind of performance impact the reporting process has, and if they've found any clever tricks to minimize overhead. I'm expecting to see some interesting design choices in here, and I'm ready to dig deep. Let's see what gems we can unearth.
|
| 142/4 |
2026/11/19 00:02 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:301 LineCount:100]
Results: map[Contents: 301: * No match for runtime functions -- @skip entries to skip to
302: * get to first frame of interest.
303: */
304: break;
305: }
306:
307: return skip;
308: }
309:
310: /*
311: * Skips to the first entry that matches the function of @ip, and then replaces
312: * that entry with @ip, returning the entries to skip with @replaced containing
313: * the replaced entry.
314: */
315: static int
316: replace_stack_entry(unsigned long stack_entries[], int num_entries, unsigned long ip,
317: unsigned long *replaced)
318: {
319: unsigned long symbolsize, offset;
320: unsigned long target_func;
321: int skip;
322:
323: if (kallsyms_lookup_size_offset(ip, &symbolsize, &offset))
324: target_func = ip - offset;
325: else
326: goto fallback;
327:
328: for (skip = 0; skip < num_entries; ++skip) {
329: unsigned long func = stack_entries[skip];
330:
331: if (!kallsyms_lookup_size_offset(func, &symbolsize, &offset))
332: goto fallback;
333: func -= offset;
334:
335: if (func == target_func) {
336: *replaced = stack_entries[skip];
337: stack_entries[skip] = ip;
338: return skip;
339: }
340: }
341:
342: fallback:
343: /* Should not happen; the resulting stack trace is likely misleading. */
344: WARN_ONCE(1, "Cannot find frame for %pS in stack trace", (void *)ip);
345: return get_stack_skipnr(stack_entries, num_entries);
346: }
347:
348: static int
349: sanitize_stack_entries(unsigned long stack_entries[], int num_entries, unsigned long ip,
350: unsigned long *replaced)
351: {
352: return ip ? replace_stack_entry(stack_entries, num_entries, ip, replaced) :
353: get_stack_skipnr(stack_entries, num_entries);
354: }
355:
356: /* Compares symbolized strings of addr1 and addr2. */
357: static int sym_strcmp(void *addr1, void *addr2)
358: {
359: char buf1[64];
360: char buf2[64];
361:
362: snprintf(buf1, sizeof(buf1), "%pS", addr1);
363: snprintf(buf2, sizeof(buf2), "%pS", addr2);
364:
365: return strncmp(buf1, buf2, sizeof(buf1));
366: }
367:
368: static void
369: print_stack_trace(unsigned long stack_entries[], int num_entries, unsigned long reordered_to)
370: __must_hold(&report_lock)
371: {
372: stack_trace_print(stack_entries, num_entries, 0);
373: if (reordered_to)
374: pr_err(" |\n +-> reordered to: %pS\n", (void *)reordered_to);
375: }
376:
377: static void print_verbose_info(struct task_struct *task)
378: __must_hold(&report_lock)
379: {
380: if (!task)
381: return;
382:
383: /* Restore IRQ state trace for printing. */
384: kcsan_restore_irqtrace(task);
385:
386: pr_err("\n");
387: debug_show_held_locks(task);
388: print_irqtrace_events(task);
389: }
390:
391: static void print_report(enum kcsan_value_change value_change,
392: const struct access_info *ai,
393: struct other_info *other_info,
394: u64 old, u64 new, u64 mask)
395: __must_hold(&report_lock)
396: {
397: unsigned long reordered_to = 0;
398: unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 };
399: int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
400: int skipnr = sanitize_stack_entries(stack_entries, num_stack_entries, ai->ip, &reordered_to);
]
|
| 143/4 |
2026/11/19 00:02 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 14998
output: 38
thoughts: 21
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Diving into `print_report`**
Alright, that's it, let's zero in on `print_report`. Forget everything else for now, that's where the critical functionality lies. We know what this system *should* do, but let's dive deep into the implementation. What's the flow? What are the assumptions made internally? Are there any potential bottlenecks I need to be aware of? Let's take a comprehensive look, and really *understand* what's going on within `print_report` before we make any assessments about the overall system. Time to deconstruct this function and understand its nuances. Let's see how it's actually pulling this thing off.
|
| 144/4 |
2026/11/19 00:03 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:401 LineCount:100]
Results: map[Contents: 401: unsigned long this_frame = stack_entries[skipnr];
402: unsigned long other_reordered_to = 0;
403: unsigned long other_frame = 0;
404: int other_skipnr = 0; /* silence uninit warnings */
405:
406: /*
407: * Must check report filter rules before starting to print.
408: */
409: if (skip_report(KCSAN_VALUE_CHANGE_TRUE, stack_entries[skipnr]))
410: return;
411:
412: if (other_info) {
413: other_skipnr = sanitize_stack_entries(other_info->stack_entries,
414: other_info->num_stack_entries,
415: other_info->ai.ip, &other_reordered_to);
416: other_frame = other_info->stack_entries[other_skipnr];
417:
418: /* @value_change is only known for the other thread */
419: if (skip_report(value_change, other_frame))
420: return;
421: }
422:
423: if (rate_limit_report(this_frame, other_frame))
424: return;
425:
426: /* Print report header. */
427: pr_err("==================================================================\n");
428: if (other_info) {
429: int cmp;
430:
431: /*
432: * Order functions lexographically for consistent bug titles.
433: * Do not print offset of functions to keep title short.
434: */
435: cmp = sym_strcmp((void *)other_frame, (void *)this_frame);
436: pr_err("BUG: KCSAN: %s in %ps / %ps\n",
437: get_bug_type(ai->access_type | other_info->ai.access_type),
438: (void *)(cmp < 0 ? other_frame : this_frame),
439: (void *)(cmp < 0 ? this_frame : other_frame));
440: } else {
441: pr_err("BUG: KCSAN: %s in %pS\n", get_bug_type(ai->access_type),
442: (void *)this_frame);
443: }
444:
445: pr_err("\n");
446:
447: /* Print information about the racing accesses. */
448: if (other_info) {
449: pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
450: get_access_type(other_info->ai.access_type), other_info->ai.ptr,
451: other_info->ai.size, get_thread_desc(other_info->ai.task_pid),
452: other_info->ai.cpu_id);
453:
454: /* Print the other thread's stack trace. */
455: print_stack_trace(other_info->stack_entries + other_skipnr,
456: other_info->num_stack_entries - other_skipnr,
457: other_reordered_to);
458: if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
459: print_verbose_info(other_info->task);
460:
461: pr_err("\n");
462: pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
463: get_access_type(ai->access_type), ai->ptr, ai->size,
464: get_thread_desc(ai->task_pid), ai->cpu_id);
465: } else {
466: pr_err("race at unknown origin, with %s to 0x%px of %zu bytes by %s on cpu %i:\n",
467: get_access_type(ai->access_type), ai->ptr, ai->size,
468: get_thread_desc(ai->task_pid), ai->cpu_id);
469: }
470: /* Print stack trace of this thread. */
471: print_stack_trace(stack_entries + skipnr, num_stack_entries - skipnr, reordered_to);
472: if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
473: print_verbose_info(current);
474:
475: /* Print observed value change. */
476: if (ai->size <= 8) {
477: int hex_len = ai->size * 2;
478: u64 diff = old ^ new;
479:
480: if (mask)
481: diff &= mask;
482: if (diff) {
483: pr_err("\n");
484: pr_err("value changed: 0x%0*llx -> 0x%0*llx\n",
485: hex_len, old, hex_len, new);
486: if (mask) {
487: pr_err(" bits changed: 0x%0*llx with mask 0x%0*llx\n",
488: hex_len, diff, hex_len, mask);
489: }
490: }
491: }
492:
493: /* Print report footer. */
494: pr_err("\n");
495: pr_err("Reported by Kernel Concurrency Sanitizer on:\n");
496: dump_stack_print_info(KERN_DEFAULT);
497: pr_err("==================================================================\n");
498:
499: check_panic_on_warn("KCSAN");
500: }
]
|
| 145/4 |
2026/11/19 00:03 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 16947
output: 38
thoughts: 1082
Thoughts: **Analyzing a KCSAN Data Race Report**
Okay, let's break this down. First, I see a KCSAN data race report. Specifically, I'm looking at lines 428-444 and 448-471 within the KCSAN code, which seem to handle the printing of the report. The key observation is the structure of the output and the information it presents, and this particular report looks odd.
The report format has two primary blocks. The first block seems to describe the "other" access with lines 448-471, and then the current, "this" access. The bug title combines information from each access. The report in the prompt shows an empty stack trace *before* the second access description, which is unusual.
Focusing on the provided example: `BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid`. The critical clue is "0x0". In the code, this "0x0" maps to `other_frame`. Looking at the code:
* `other_info->ai.task_pid = 3283`
* `other_info->ai.cpu_id = 1`
* `other_info->ai.access_type = 0` (which is a read)
* `other_info->stack_entries` appears to be empty, as indicated by the fact that `num_stack_entries - other_skipnr == 0`.
This means the *first* access, described by `other_info`, is a read from 0x0 by task 3283 on cpu 1, and no stack trace is printed for it. And *then*, the second access is the read-write with a corresponding stack trace. That suggests there's a problem in how the `other_info` structure is populated, since the first access is missing its stack trace.
The core question now is: Where does `other_info` come from, and how is it populated? I need to trace back how `print_report` is called. It's clear that there is likely some issue with how `other_info` is constructed or how the stack trace is handled for the initial access. To understand the root cause of this missing stack trace, I need to investigate the surrounding code, especially in `report.c` and `core.c`, to figure out where `other_info` is filled and see if there are any conditions that might cause the stack trace to be omitted for the first access. I need to understand the data flow, potential race conditions, and how KCSAN determines what to report.
|
| 146/4 |
2026/11/19 00:05 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:501 LineCount:100]
Results: map[Contents: 501:
502: static void release_report(unsigned long *flags, struct other_info *other_info)
503: __releases(&report_lock)
504: {
505: /*
506: * Use size to denote valid/invalid, since KCSAN entirely ignores
507: * 0-sized accesses.
508: */
509: other_info->ai.size = 0;
510: raw_spin_unlock_irqrestore(&report_lock, *flags);
511: }
512:
513: /*
514: * Sets @other_info->task and awaits consumption of @other_info.
515: */
516: static void set_other_info_task_blocking(unsigned long *flags,
517: const struct access_info *ai,
518: struct other_info *other_info)
519: __must_hold(&report_lock)
520: {
521: /*
522: * We may be instrumenting a code-path where current->state is already
523: * something other than TASK_RUNNING.
524: */
525: const bool is_running = task_is_running(current);
526: /*
527: * To avoid deadlock in case we are in an interrupt here and this is a
528: * race with a task on the same CPU (KCSAN_INTERRUPT_WATCHER), provide a
529: * timeout to ensure this works in all contexts.
530: *
531: * Await approximately the worst case delay of the reporting thread (if
532: * we are not interrupted).
533: */
534: int timeout = max(kcsan_udelay_task, kcsan_udelay_interrupt);
535:
536: other_info->task = current;
537: do {
538: if (is_running) {
539: /*
540: * Let lockdep know the real task is sleeping, to print
541: * the held locks (recall we turned lockdep off, so
542: * locking/unlocking @report_lock won't be recorded).
543: */
544: set_current_state(TASK_UNINTERRUPTIBLE);
545: }
546: raw_spin_unlock_irqrestore(&report_lock, *flags);
547: /*
548: * We cannot call schedule() since we also cannot reliably
549: * determine if sleeping here is permitted -- see in_atomic().
550: */
551:
552: udelay(1);
553: raw_spin_lock_irqsave(&report_lock, *flags);
554: if (timeout-- < 0) {
555: /*
556: * Abort. Reset @other_info->task to NULL, since it
557: * appears the other thread is still going to consume
558: * it. It will result in no verbose info printed for
559: * this task.
560: */
561: other_info->task = NULL;
562: break;
563: }
564: /*
565: * If invalid, or @ptr nor @current matches, then @other_info
566: * has been consumed and we may continue. If not, retry.
567: */
568: } while (other_info->ai.size && other_info->ai.ptr == ai->ptr &&
569: other_info->task == current);
570: if (is_running)
571: set_current_state(TASK_RUNNING);
572: }
573:
574: /* Populate @other_info; requires that the provided @other_info not in use. */
575: static void prepare_report_producer(unsigned long *flags,
576: const struct access_info *ai,
577: struct other_info *other_info)
578: __must_not_hold(&report_lock)
579: {
580: raw_spin_lock_irqsave(&report_lock, *flags);
581:
582: /*
583: * The same @other_infos entry cannot be used concurrently, because
584: * there is a one-to-one mapping to watchpoint slots (@watchpoints in
585: * core.c), and a watchpoint is only released for reuse after reporting
586: * is done by the consumer of @other_info. Therefore, it is impossible
587: * for another concurrent prepare_report_producer() to set the same
588: * @other_info, and are guaranteed exclusivity for the @other_infos
589: * entry pointed to by @other_info.
590: *
591: * To check this property holds, size should never be non-zero here,
592: * because every consumer of struct other_info resets size to 0 in
593: * release_report().
594: */
595: WARN_ON(other_info->ai.size);
596:
597: other_info->ai = *ai;
598: other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);
599:
600: if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
]
|
| 147/4 |
2026/11/19 00:05 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 20218
output: 37
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, delivered as a first-person summary, keeping in mind the expert user:
**Diving into `kernel/kcsan/report.c`**
Right, time to dig deeper. The KCSAN reporting code is where the rubber meets the road. I need to understand *exactly* how the tool presents its findings. I'm focusing on `report.c` because, based on my understanding of the KCSAN architecture, this is where the crucial logic for generating and outputting those detected race conditions and data races is likely located. I'm looking for the mechanism, the data structures, and the control flow that governs how those reports are constructed. I need to see how the metadata β like the specific memory addresses, instruction pointers, threads involved, and access types β is formatted and conveyed. I'm expecting to see something that's both human-readable and potentially machine-parseable, because, let's be honest, I'll probably be feeding these reports into some automated analysis pipeline eventually. Knowing the output format will be key to that. I'll need to know whether it's using a custom format, or leveraging existing kernel debugging infrastructure. Any level of abstraction or generalization they've employed in the reporting phase will be of particular interest.
|
| 148/4 |
2026/11/19 00:06 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:601 LineCount:80]
Results: map[Contents: 601: set_other_info_task_blocking(flags, ai, other_info);
602:
603: raw_spin_unlock_irqrestore(&report_lock, *flags);
604: }
605:
606: /* Awaits producer to fill @other_info and then returns. */
607: static bool prepare_report_consumer(unsigned long *flags,
608: const struct access_info *ai,
609: struct other_info *other_info)
610: __cond_acquires(true, &report_lock)
611: {
612:
613: raw_spin_lock_irqsave(&report_lock, *flags);
614: while (!other_info->ai.size) { /* Await valid @other_info. */
615: raw_spin_unlock_irqrestore(&report_lock, *flags);
616: cpu_relax();
617: raw_spin_lock_irqsave(&report_lock, *flags);
618: }
619:
620: /* Should always have a matching access based on watchpoint encoding. */
621: if (WARN_ON(!matching_access((unsigned long)other_info->ai.ptr & WATCHPOINT_ADDR_MASK, other_info->ai.size,
622: (unsigned long)ai->ptr & WATCHPOINT_ADDR_MASK, ai->size)))
623: goto discard;
624:
625: if (!matching_access((unsigned long)other_info->ai.ptr, other_info->ai.size,
626: (unsigned long)ai->ptr, ai->size)) {
627: /*
628: * If the actual accesses to not match, this was a false
629: * positive due to watchpoint encoding.
630: */
631: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ENCODING_FALSE_POSITIVES]);
632: goto discard;
633: }
634:
635: return true;
636:
637: discard:
638: release_report(flags, other_info);
639: return false;
640: }
641:
642: static struct access_info prepare_access_info(const volatile void *ptr, size_t size,
643: int access_type, unsigned long ip)
644: {
645: return (struct access_info) {
646: .ptr = ptr,
647: .size = size,
648: .access_type = access_type,
649: .task_pid = in_task() ? task_pid_nr(current) : -1,
650: .cpu_id = raw_smp_processor_id(),
651: /* Only replace stack entry with @ip if scoped access. */
652: .ip = (access_type & KCSAN_ACCESS_SCOPED) ? ip : 0,
653: };
654: }
655:
656: void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
657: unsigned long ip, int watchpoint_idx)
658: {
659: const struct access_info ai = prepare_access_info(ptr, size, access_type, ip);
660: unsigned long flags;
661:
662: kcsan_disable_current();
663: lockdep_off(); /* See kcsan_report_known_origin(). */
664:
665: prepare_report_producer(&flags, &ai, &other_infos[watchpoint_idx]);
666:
667: lockdep_on();
668: kcsan_enable_current();
669: }
670:
671: void kcsan_report_known_origin(const volatile void *ptr, size_t size, int access_type,
672: unsigned long ip, enum kcsan_value_change value_change,
673: int watchpoint_idx, u64 old, u64 new, u64 mask)
674: {
675: const struct access_info ai = prepare_access_info(ptr, size, access_type, ip);
676: struct other_info *other_info = &other_infos[watchpoint_idx];
677: unsigned long flags = 0;
678:
679: kcsan_disable_current();
680: /*
]
|
| 149/4 |
2026/11/19 00:06 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 21876
output: 37
thoughts: 17
Thoughts: Okay, here's my interpretation of what's going through my mind, rendered in the first person, as if I'm the one having these thoughts, targeting an expert audience:
**Diving into `kernel/kcsan/report.c`**
Alright, time to dig deeper. The investigation clearly points to `kernel/kcsan/report.c` as the next logical stop. I know this module intimately, but it's always good to refresh my memory, especially when troubleshooting. I'm focusing my attention there to see how the reports are constructed and if I can immediately identify any potential issues with the reporting logic, data formatting, or any race conditions within the reporting mechanism itself. I expect that a subtle bug there, could be causing the observed anomalous behavior. Maybe there's a problem with how the KCSan data is marshalled, or how it's sent upstream. I'll be looking for anything that might be introducing inconsistencies or corruption in the reported data, specifically related to the problematic scenarios the user is describing. I'll need to pay close attention to the lock interactions, memory barriers and any potentially shared data structures. This is where the magic happens, so let's see what's actually going on.
|
| 150/4 |
2026/11/19 00:07 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/report.c FirstLine:681 LineCount:50]
Results: map[Contents: 681: * Because we may generate reports when we're in scheduler code, the use
682: * of printk() could deadlock. Until such time that all printing code
683: * called in print_report() is scheduler-safe, accept the risk, and just
684: * get our message out. As such, also disable lockdep to hide the
685: * warning, and avoid disabling lockdep for the rest of the kernel.
686: */
687: lockdep_off();
688:
689: if (!prepare_report_consumer(&flags, &ai, other_info))
690: goto out;
691: /*
692: * Never report if value_change is FALSE, only when it is
693: * either TRUE or MAYBE. In case of MAYBE, further filtering may
694: * be done once we know the full stack trace in print_report().
695: */
696: if (value_change != KCSAN_VALUE_CHANGE_FALSE)
697: print_report(value_change, &ai, other_info, old, new, mask);
698:
699: release_report(&flags, other_info);
700: out:
701: lockdep_on();
702: kcsan_enable_current();
703: }
704:
705: void kcsan_report_unknown_origin(const volatile void *ptr, size_t size, int access_type,
706: unsigned long ip, u64 old, u64 new, u64 mask)
707: {
708: const struct access_info ai = prepare_access_info(ptr, size, access_type, ip);
709: unsigned long flags;
710:
711: kcsan_disable_current();
712: lockdep_off(); /* See kcsan_report_known_origin(). */
713:
714: raw_spin_lock_irqsave(&report_lock, flags);
715: print_report(KCSAN_VALUE_CHANGE_TRUE, &ai, NULL, old, new, mask);
716: raw_spin_unlock_irqrestore(&report_lock, flags);
717:
718: lockdep_on();
719: kcsan_enable_current();
720: }
]
|
| 151/4 |
2026/11/19 00:07 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 22870
output: 36
thoughts: 41
Thoughts: Okay, let's dive into this KCSAN investigation. I need to refresh my understanding of `core.c` and how it fits into the overall picture. My immediate questions are:
**Examining KCSAN's `core.c` Implementation**
First, I need to understand the fundamental mechanics: How does KCSAN actually *work* within this core file? Specifically, I need to trace the setup of watchpoints β the core of any data race detection system. Where are they established in the code? Then, how are those watchpoints *used* to detect races? What's the process by which KCSAN consumes the information gleaned from these watchpoints? I know there's a good amount of complexity at play, I have to consider the nuances for when the access happens on the same CPU core, within the same task. This is where I'll find the most interesting behavior. I need a clear mental model of how the different layers interact to generate results.
|
| 152/4 |
2026/11/19 00:08 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:1 LineCount:100]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0
2: /*
3: * KCSAN core runtime.
4: *
5: * Copyright (C) 2019, Google LLC.
6: */
7:
8: #define pr_fmt(fmt) "kcsan: " fmt
9:
10: #include <linux/atomic.h>
11: #include <linux/bug.h>
12: #include <linux/delay.h>
13: #include <linux/export.h>
14: #include <linux/init.h>
15: #include <linux/kernel.h>
16: #include <linux/list.h>
17: #include <linux/minmax.h>
18: #include <linux/moduleparam.h>
19: #include <linux/percpu.h>
20: #include <linux/preempt.h>
21: #include <linux/sched.h>
22: #include <linux/string.h>
23: #include <linux/uaccess.h>
24:
25: #include "encoding.h"
26: #include "kcsan.h"
27: #include "permissive.h"
28:
29: static bool kcsan_early_enable = IS_ENABLED(CONFIG_KCSAN_EARLY_ENABLE);
30: unsigned int kcsan_udelay_task = CONFIG_KCSAN_UDELAY_TASK;
31: unsigned int kcsan_udelay_interrupt = CONFIG_KCSAN_UDELAY_INTERRUPT;
32: static long kcsan_skip_watch = CONFIG_KCSAN_SKIP_WATCH;
33: static bool kcsan_interrupt_watcher = IS_ENABLED(CONFIG_KCSAN_INTERRUPT_WATCHER);
34:
35: #ifdef MODULE_PARAM_PREFIX
36: #undef MODULE_PARAM_PREFIX
37: #endif
38: #define MODULE_PARAM_PREFIX "kcsan."
39: module_param_named(early_enable, kcsan_early_enable, bool, 0);
40: module_param_named(udelay_task, kcsan_udelay_task, uint, 0644);
41: module_param_named(udelay_interrupt, kcsan_udelay_interrupt, uint, 0644);
42: module_param_named(skip_watch, kcsan_skip_watch, long, 0644);
43: module_param_named(interrupt_watcher, kcsan_interrupt_watcher, bool, 0444);
44:
45: #ifdef CONFIG_KCSAN_WEAK_MEMORY
46: static bool kcsan_weak_memory = true;
47: module_param_named(weak_memory, kcsan_weak_memory, bool, 0644);
48: #else
49: #define kcsan_weak_memory false
50: #endif
51:
52: bool kcsan_enabled;
53:
54: /* Per-CPU kcsan_ctx for interrupts */
55: static DEFINE_PER_CPU(struct kcsan_ctx, kcsan_cpu_ctx) = {
56: .scoped_accesses = {LIST_POISON1, NULL},
57: };
58:
59: /*
60: * Helper macros to index into adjacent slots, starting from address slot
61: * itself, followed by the right and left slots.
62: *
63: * The purpose is 2-fold:
64: *
65: * 1. if during insertion the address slot is already occupied, check if
66: * any adjacent slots are free;
67: * 2. accesses that straddle a slot boundary due to size that exceeds a
68: * slot's range may check adjacent slots if any watchpoint matches.
69: *
70: * Note that accesses with very large size may still miss a watchpoint; however,
71: * given this should be rare, this is a reasonable trade-off to make, since this
72: * will avoid:
73: *
74: * 1. excessive contention between watchpoint checks and setup;
75: * 2. larger number of simultaneous watchpoints without sacrificing
76: * performance.
77: *
78: * Example: SLOT_IDX values for KCSAN_CHECK_ADJACENT=1, where i is [0, 1, 2]:
79: *
80: * slot=0: [ 1, 2, 0]
81: * slot=9: [10, 11, 9]
82: * slot=63: [64, 65, 63]
83: */
84: #define SLOT_IDX(slot, i) (slot + ((i + KCSAN_CHECK_ADJACENT) % NUM_SLOTS))
85:
86: /*
87: * SLOT_IDX_FAST is used in the fast-path. Not first checking the address's primary
88: * slot (middle) is fine if we assume that races occur rarely. The set of
89: * indices {SLOT_IDX(slot, i) | i in [0, NUM_SLOTS)} is equivalent to
90: * {SLOT_IDX_FAST(slot, i) | i in [0, NUM_SLOTS)}.
91: */
92: #define SLOT_IDX_FAST(slot, i) (slot + i)
93:
94: /*
95: * Watchpoints, with each entry encoded as defined in encoding.h: in order to be
96: * able to safely update and access a watchpoint without introducing locking
97: * overhead, we encode each watchpoint as a single atomic long. The initial
98: * zero-initialized state matches INVALID_WATCHPOINT.
99: *
100: * Add NUM_SLOTS-1 entries to account for overflow; this helps avoid having to
]
|
| 153/4 |
2026/11/19 00:08 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 24847
output: 38
thoughts: 17
Thoughts: Okay, here's my interpretation of that starting thought, rendered as if it's my own thought process:
**Diving into `kernel/kcsan/core.c`**
Alright, time to get deeper into this KCSAN code. I've got a good handle on the overall KCSAN architecture, but now I want to hone in on the core implementation. I'm going to navigate directly to `kernel/kcsan/core.c`. Let's see what interesting techniques and strategies are employed there, and how it really functions on a more granular level. Hopefully, I can understand the nitty-gritty details of how the data races are detected and reported within the kernel. Time to dig in and get my hands dirty.
|
| 154/4 |
2026/11/19 00:08 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:101 LineCount:100]
Results: map[Contents: 101: * use more complicated SLOT_IDX_FAST calculation with modulo in the fast-path.
102: */
103: static atomic_long_t watchpoints[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
104:
105: /*
106: * Instructions to skip watching counter, used in should_watch(). We use a
107: * per-CPU counter to avoid excessive contention.
108: */
109: static DEFINE_PER_CPU(long, kcsan_skip);
110:
111: /* For kcsan_prandom_u32_max(). */
112: static DEFINE_PER_CPU(u32, kcsan_rand_state);
113:
114: static __always_inline atomic_long_t *find_watchpoint(unsigned long addr,
115: size_t size,
116: bool expect_write,
117: long *encoded_watchpoint)
118: {
119: const int slot = watchpoint_slot(addr);
120: const unsigned long addr_masked = addr & WATCHPOINT_ADDR_MASK;
121: atomic_long_t *watchpoint;
122: unsigned long wp_addr_masked;
123: size_t wp_size;
124: bool is_write;
125: int i;
126:
127: BUILD_BUG_ON(CONFIG_KCSAN_NUM_WATCHPOINTS < NUM_SLOTS);
128:
129: for (i = 0; i < NUM_SLOTS; ++i) {
130: watchpoint = &watchpoints[SLOT_IDX_FAST(slot, i)];
131: *encoded_watchpoint = atomic_long_read(watchpoint);
132: if (!decode_watchpoint(*encoded_watchpoint, &wp_addr_masked,
133: &wp_size, &is_write))
134: continue;
135:
136: if (expect_write && !is_write)
137: continue;
138:
139: /* Check if the watchpoint matches the access. */
140: if (matching_access(wp_addr_masked, wp_size, addr_masked, size))
141: return watchpoint;
142: }
143:
144: return NULL;
145: }
146:
147: static inline atomic_long_t *
148: insert_watchpoint(unsigned long addr, size_t size, bool is_write)
149: {
150: const int slot = watchpoint_slot(addr);
151: const long encoded_watchpoint = encode_watchpoint(addr, size, is_write);
152: atomic_long_t *watchpoint;
153: int i;
154:
155: /* Check slot index logic, ensuring we stay within array bounds. */
156: BUILD_BUG_ON(SLOT_IDX(0, 0) != KCSAN_CHECK_ADJACENT);
157: BUILD_BUG_ON(SLOT_IDX(0, KCSAN_CHECK_ADJACENT+1) != 0);
158: BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT) != ARRAY_SIZE(watchpoints)-1);
159: BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT+1) != ARRAY_SIZE(watchpoints) - NUM_SLOTS);
160:
161: for (i = 0; i < NUM_SLOTS; ++i) {
162: long expect_val = INVALID_WATCHPOINT;
163:
164: /* Try to acquire this slot. */
165: watchpoint = &watchpoints[SLOT_IDX(slot, i)];
166: if (atomic_long_try_cmpxchg_relaxed(watchpoint, &expect_val, encoded_watchpoint))
167: return watchpoint;
168: }
169:
170: return NULL;
171: }
172:
173: /*
174: * Return true if watchpoint was successfully consumed, false otherwise.
175: *
176: * This may return false if:
177: *
178: * 1. another thread already consumed the watchpoint;
179: * 2. the thread that set up the watchpoint already removed it;
180: * 3. the watchpoint was removed and then re-used.
181: */
182: static __always_inline bool
183: try_consume_watchpoint(atomic_long_t *watchpoint, long encoded_watchpoint)
184: {
185: return atomic_long_try_cmpxchg_relaxed(watchpoint, &encoded_watchpoint, CONSUMED_WATCHPOINT);
186: }
187:
188: /* Return true if watchpoint was not touched, false if already consumed. */
189: static inline bool consume_watchpoint(atomic_long_t *watchpoint)
190: {
191: return atomic_long_xchg_relaxed(watchpoint, CONSUMED_WATCHPOINT) != CONSUMED_WATCHPOINT;
192: }
193:
194: /* Remove the watchpoint -- its slot may be reused after. */
195: static inline void remove_watchpoint(atomic_long_t *watchpoint)
196: {
197: atomic_long_set(watchpoint, INVALID_WATCHPOINT);
198: }
199:
200: static __always_inline struct kcsan_ctx *get_ctx(void)
]
|
| 155/4 |
2026/11/19 00:08 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 26742
output: 38
thoughts: 17
Thoughts: Okay, here's my interpretation of that starting thought, rendered as if it's my own thought process:
**Diving into `kernel/kcsan/core.c`**
Alright, time to get deeper into this KCSAN code. I've got a good handle on the overall KCSAN architecture, but now I want to hone in on the core implementation. I'm going to navigate directly to `kernel/kcsan/core.c`. Let's see what interesting techniques and strategies are employed there, and how it really functions on a more granular level. Hopefully, I can understand the nitty-gritty details of how the data races are detected and reported within the kernel. Time to dig in and get my hands dirty.
|
| 156/4 |
2026/11/19 00:09 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:201 LineCount:100]
Results: map[Contents: 201: {
202: /*
203: * In interrupts, use raw_cpu_ptr to avoid unnecessary checks, that would
204: * also result in calls that generate warnings in uaccess regions.
205: */
206: return in_task() ? ¤t->kcsan_ctx : raw_cpu_ptr(&kcsan_cpu_ctx);
207: }
208:
209: static __always_inline void
210: check_access(const volatile void *ptr, size_t size, int type, unsigned long ip);
211:
212: /* Check scoped accesses; never inline because this is a slow-path! */
213: static noinline void kcsan_check_scoped_accesses(void)
214: {
215: struct kcsan_ctx *ctx = get_ctx();
216: struct kcsan_scoped_access *scoped_access;
217:
218: if (ctx->disable_scoped)
219: return;
220:
221: ctx->disable_scoped++;
222: list_for_each_entry(scoped_access, &ctx->scoped_accesses, list) {
223: check_access(scoped_access->ptr, scoped_access->size,
224: scoped_access->type, scoped_access->ip);
225: }
226: ctx->disable_scoped--;
227: }
228:
229: /* Rules for generic atomic accesses. Called from fast-path. */
230: static __always_inline bool
231: is_atomic(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size, int type)
232: {
233: if (type & KCSAN_ACCESS_ATOMIC)
234: return true;
235:
236: /*
237: * Unless explicitly declared atomic, never consider an assertion access
238: * as atomic. This allows using them also in atomic regions, such as
239: * seqlocks, without implicitly changing their semantics.
240: */
241: if (type & KCSAN_ACCESS_ASSERT)
242: return false;
243:
244: if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC) &&
245: (type & KCSAN_ACCESS_WRITE) && size <= sizeof(long) &&
246: !(type & KCSAN_ACCESS_COMPOUND) && IS_ALIGNED((unsigned long)ptr, size))
247: return true; /* Assume aligned writes up to word size are atomic. */
248:
249: if (ctx->atomic_next > 0) {
250: /*
251: * Because we do not have separate contexts for nested
252: * interrupts, in case atomic_next is set, we simply assume that
253: * the outer interrupt set atomic_next. In the worst case, we
254: * will conservatively consider operations as atomic. This is a
255: * reasonable trade-off to make, since this case should be
256: * extremely rare; however, even if extremely rare, it could
257: * lead to false positives otherwise.
258: */
259: if ((hardirq_count() >> HARDIRQ_SHIFT) < 2)
260: --ctx->atomic_next; /* in task, or outer interrupt */
261: return true;
262: }
263:
264: return ctx->atomic_nest_count > 0 || ctx->in_flat_atomic;
265: }
266:
267: static __always_inline bool
268: should_watch(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size, int type)
269: {
270: /*
271: * Never set up watchpoints when memory operations are atomic.
272: *
273: * Need to check this first, before kcsan_skip check below: (1) atomics
274: * should not count towards skipped instructions, and (2) to actually
275: * decrement kcsan_atomic_next for consecutive instruction stream.
276: */
277: if (is_atomic(ctx, ptr, size, type))
278: return false;
279:
280: if (this_cpu_dec_return(kcsan_skip) >= 0)
281: return false;
282:
283: /*
284: * NOTE: If we get here, kcsan_skip must always be reset in slow path
285: * via reset_kcsan_skip() to avoid underflow.
286: */
287:
288: /* this operation should be watched */
289: return true;
290: }
291:
292: /*
293: * Returns a pseudo-random number in interval [0, ep_ro), or 0 if ep_ro is 0,
294: * which the runtime-tunable callers may pass. Simple linear congruential
295: * generator, using constants from "Numerical Recipes".
296: */
297: static u32 kcsan_prandom_u32_max(u32 ep_ro)
298: {
299: u32 state = this_cpu_read(kcsan_rand_state);
300:
]
|
| 157/4 |
2026/11/19 00:09 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 28542
output: 38
thoughts: 17
Thoughts: Okay, here's my interpretation of that starting thought, rendered as if it's my own thought process:
**Diving into `kernel/kcsan/core.c`**
Alright, time to get deeper into this KCSAN code. I've got a good handle on the overall KCSAN architecture, but now I want to hone in on the core implementation. I'm going to navigate directly to `kernel/kcsan/core.c`. Let's see what interesting techniques and strategies are employed there, and how it really functions on a more granular level. Hopefully, I can understand the nitty-gritty details of how the data races are detected and reported within the kernel. Time to dig in and get my hands dirty.
|
| 158/4 |
2026/11/19 00:09 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:301 LineCount:100]
Results: map[Contents: 301: state = 1664525 * state + 1013904223;
302: this_cpu_write(kcsan_rand_state, state);
303:
304: return reciprocal_scale(state, ep_ro);
305: }
306:
307: static inline void reset_kcsan_skip(void)
308: {
309: long skip_count = kcsan_skip_watch -
310: (IS_ENABLED(CONFIG_KCSAN_SKIP_WATCH_RANDOMIZE) ?
311: kcsan_prandom_u32_max(kcsan_skip_watch) :
312: 0);
313: this_cpu_write(kcsan_skip, skip_count);
314: }
315:
316: static __always_inline bool kcsan_is_enabled(struct kcsan_ctx *ctx)
317: {
318: return READ_ONCE(kcsan_enabled) && !ctx->disable_count;
319: }
320:
321: /* Introduce delay depending on context and configuration. */
322: static void delay_access(int type)
323: {
324: unsigned int delay = in_task() ? kcsan_udelay_task : kcsan_udelay_interrupt;
325: /* For certain access types, skew the random delay to be longer. */
326: unsigned int skew_delay_order =
327: (type & (KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_ASSERT)) ? 1 : 0;
328:
329: delay -= IS_ENABLED(CONFIG_KCSAN_DELAY_RANDOMIZE) ?
330: kcsan_prandom_u32_max(delay >> skew_delay_order) :
331: 0;
332: udelay(delay);
333: }
334:
335: /*
336: * Reads the instrumented memory for value change detection; value change
337: * detection is currently done for accesses up to a size of 8 bytes.
338: */
339: static __always_inline u64 read_instrumented_memory(const volatile void *ptr, size_t size)
340: {
341: /*
342: * In the below we don't necessarily need the read of the location to
343: * be atomic, and we don't use READ_ONCE(), since all we need for race
344: * detection is to observe 2 different values.
345: *
346: * Furthermore, on certain architectures (such as arm64), READ_ONCE()
347: * may turn into more complex instructions than a plain load that cannot
348: * do unaligned accesses.
349: */
350: switch (size) {
351: case 1: return *(const volatile u8 *)ptr;
352: case 2: return *(const volatile u16 *)ptr;
353: case 4: return *(const volatile u32 *)ptr;
354: case 8: return *(const volatile u64 *)ptr;
355: default: return 0; /* Ignore; we do not diff the values. */
356: }
357: }
358:
359: void kcsan_save_irqtrace(struct task_struct *task)
360: {
361: #ifdef CONFIG_TRACE_IRQFLAGS
362: task->kcsan_save_irqtrace = task->irqtrace;
363: #endif
364: }
365:
366: void kcsan_restore_irqtrace(struct task_struct *task)
367: {
368: #ifdef CONFIG_TRACE_IRQFLAGS
369: task->irqtrace = task->kcsan_save_irqtrace;
370: #endif
371: }
372:
373: static __always_inline int get_kcsan_stack_depth(void)
374: {
375: #ifdef CONFIG_KCSAN_WEAK_MEMORY
376: return current->kcsan_stack_depth;
377: #else
378: BUILD_BUG();
379: return 0;
380: #endif
381: }
382:
383: static __always_inline void add_kcsan_stack_depth(int val)
384: {
385: #ifdef CONFIG_KCSAN_WEAK_MEMORY
386: current->kcsan_stack_depth += val;
387: #else
388: BUILD_BUG();
389: #endif
390: }
391:
392: static __always_inline struct kcsan_scoped_access *get_reorder_access(struct kcsan_ctx *ctx)
393: {
394: #ifdef CONFIG_KCSAN_WEAK_MEMORY
395: return ctx->disable_scoped ? NULL : &ctx->reorder_access;
396: #else
397: return NULL;
398: #endif
399: }
400:
]
|
| 159/4 |
2026/11/19 00:09 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 30309
output: 38
thoughts: 17
Thoughts: Okay, here's my interpretation of that starting thought, rendered as if it's my own thought process:
**Diving into `kernel/kcsan/core.c`**
Alright, time to get deeper into this KCSAN code. I've got a good handle on the overall KCSAN architecture, but now I want to hone in on the core implementation. I'm going to navigate directly to `kernel/kcsan/core.c`. Let's see what interesting techniques and strategies are employed there, and how it really functions on a more granular level. Hopefully, I can understand the nitty-gritty details of how the data races are detected and reported within the kernel. Time to dig in and get my hands dirty.
|
| 160/4 |
2026/11/19 00:09 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:401 LineCount:100]
Results: map[Contents: 401: static __always_inline bool
402: find_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
403: int type, unsigned long ip)
404: {
405: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
406:
407: if (!reorder_access)
408: return false;
409:
410: /*
411: * Note: If accesses are repeated while reorder_access is identical,
412: * never matches the new access, because !(type & KCSAN_ACCESS_SCOPED).
413: */
414: return reorder_access->ptr == ptr && reorder_access->size == size &&
415: reorder_access->type == type && reorder_access->ip == ip;
416: }
417:
418: static inline void
419: set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
420: int type, unsigned long ip)
421: {
422: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
423:
424: if (!reorder_access || !kcsan_weak_memory)
425: return;
426:
427: /*
428: * To avoid nested interrupts or scheduler (which share kcsan_ctx)
429: * reading an inconsistent reorder_access, ensure that the below has
430: * exclusive access to reorder_access by disallowing concurrent use.
431: */
432: ctx->disable_scoped++;
433: barrier();
434: reorder_access->ptr = ptr;
435: reorder_access->size = size;
436: reorder_access->type = type | KCSAN_ACCESS_SCOPED;
437: reorder_access->ip = ip;
438: reorder_access->stack_depth = get_kcsan_stack_depth();
439: barrier();
440: ctx->disable_scoped--;
441: }
442:
443: /*
444: * Pull everything together: check_access() below contains the performance
445: * critical operations; the fast-path (including check_access) functions should
446: * all be inlinable by the instrumentation functions.
447: *
448: * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
449: * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
450: * be filtered from the stacktrace, as well as give them unique names for the
451: * UACCESS whitelist of objtool. Each function uses user_access_save/restore(),
452: * since they do not access any user memory, but instrumentation is still
453: * emitted in UACCESS regions.
454: */
455:
456: static noinline void kcsan_found_watchpoint(const volatile void *ptr,
457: size_t size,
458: int type,
459: unsigned long ip,
460: atomic_long_t *watchpoint,
461: long encoded_watchpoint)
462: {
463: const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
464: struct kcsan_ctx *ctx = get_ctx();
465: unsigned long flags;
466: bool consumed;
467:
468: /*
469: * We know a watchpoint exists. Let's try to keep the race-window
470: * between here and finally consuming the watchpoint below as small as
471: * possible -- avoid unneccessarily complex code until consumed.
472: */
473:
474: if (!kcsan_is_enabled(ctx))
475: return;
476:
477: /*
478: * The access_mask check relies on value-change comparison. To avoid
479: * reporting a race where e.g. the writer set up the watchpoint, but the
480: * reader has access_mask!=0, we have to ignore the found watchpoint.
481: *
482: * reorder_access is never created from an access with access_mask set.
483: */
484: if (ctx->access_mask && !find_reorder_access(ctx, ptr, size, type, ip))
485: return;
486:
487: /*
488: * If the other thread does not want to ignore the access, and there was
489: * a value change as a result of this thread's operation, we will still
490: * generate a report of unknown origin.
491: *
492: * Use CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=n to filter.
493: */
494: if (!is_assert && kcsan_ignore_address(ptr))
495: return;
496:
497: /*
498: * Consuming the watchpoint must be guarded by kcsan_is_enabled() to
499: * avoid erroneously triggering reports if the context is disabled.
500: */
]
|
| 161/4 |
2026/11/19 00:09 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 32117
output: 38
thoughts: 18
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience, and written in the first person:
**Diving into the KCSAN Core**
Alright, time to get my hands dirty and jump back into the kernel. Specifically, I need to see what's happening within `kernel/kcsan/core.c`. I expect to find the heart of the Kernel Concurrency Sanitizer's functionality here, which means I'll be looking for the core data structures and primary routines used to detect data races and concurrency bugs. My immediate thought is to start tracing the major control flow to get a high-level understanding of where the instrumentation hooks are and how KCSAN integrates with the scheduler and memory management. I'll be focused on how the critical sections are marked, what kind of shadow memory or metadata is being used, and which parts of the code actually perform the analysis. Given my experience, I'm expecting to see things like instrumentation of memory accesses, lock operations, and scheduler events. I'm keen to see if they're taking a conservative approach with a lot of false positives to prioritize catching real races, or if they're aiming for precision with a greater risk of missing some races.
|
| 162/4 |
2026/11/19 00:10 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:501 LineCount:100]
Results: map[Contents: 501: consumed = try_consume_watchpoint(watchpoint, encoded_watchpoint);
502:
503: /* keep this after try_consume_watchpoint */
504: flags = user_access_save();
505:
506: if (consumed) {
507: kcsan_save_irqtrace(current);
508: kcsan_report_set_info(ptr, size, type, ip, watchpoint - watchpoints);
509: kcsan_restore_irqtrace(current);
510: } else {
511: /*
512: * The other thread may not print any diagnostics, as it has
513: * already removed the watchpoint, or another thread consumed
514: * the watchpoint before this thread.
515: */
516: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_REPORT_RACES]);
517: }
518:
519: if (is_assert)
520: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
521: else
522: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_DATA_RACES]);
523:
524: user_access_restore(flags);
525: }
526:
527: static noinline void
528: kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
529: {
530: const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
531: const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
532: atomic_long_t *watchpoint;
533: u64 old, new, diff;
534: enum kcsan_value_change value_change = KCSAN_VALUE_CHANGE_MAYBE;
535: bool interrupt_watcher = kcsan_interrupt_watcher;
536: unsigned long ua_flags = user_access_save();
537: struct kcsan_ctx *ctx = get_ctx();
538: unsigned long access_mask = ctx->access_mask;
539: unsigned long irq_flags = 0;
540: bool is_reorder_access;
541:
542: /*
543: * Always reset kcsan_skip counter in slow-path to avoid underflow; see
544: * should_watch().
545: */
546: reset_kcsan_skip();
547:
548: if (!kcsan_is_enabled(ctx))
549: goto out;
550:
551: /*
552: * Check to-ignore addresses after kcsan_is_enabled(), as we may access
553: * memory that is not yet initialized during early boot.
554: */
555: if (!is_assert && kcsan_ignore_address(ptr))
556: goto out;
557:
558: if (!check_encodable((unsigned long)ptr, size)) {
559: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_UNENCODABLE_ACCESSES]);
560: goto out;
561: }
562:
563: /*
564: * The local CPU cannot observe reordering of its own accesses, and
565: * therefore we need to take care of 2 cases to avoid false positives:
566: *
567: * 1. Races of the reordered access with interrupts. To avoid, if
568: * the current access is reorder_access, disable interrupts.
569: * 2. Avoid races of scoped accesses from nested interrupts (below).
570: */
571: is_reorder_access = find_reorder_access(ctx, ptr, size, type, ip);
572: if (is_reorder_access)
573: interrupt_watcher = false;
574: /*
575: * Avoid races of scoped accesses from nested interrupts (or scheduler).
576: * Assume setting up a watchpoint for a non-scoped (normal) access that
577: * also conflicts with a current scoped access. In a nested interrupt,
578: * which shares the context, it would check a conflicting scoped access.
579: * To avoid, disable scoped access checking.
580: */
581: ctx->disable_scoped++;
582:
583: /*
584: * Save and restore the IRQ state trace touched by KCSAN, since KCSAN's
585: * runtime is entered for every memory access, and potentially useful
586: * information is lost if dirtied by KCSAN.
587: */
588: kcsan_save_irqtrace(current);
589: if (!interrupt_watcher) {
590: local_irq_save(irq_flags);
591: /*
592: * NMIs can still fire, disable checking for all interrupt
593: * contexts.
594: */
595: raw_cpu_ptr(&kcsan_cpu_ctx)->disable_count++;
596: }
597:
598: watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
599: if (watchpoint == NULL) {
600: /*
]
|
| 163/4 |
2026/11/19 00:10 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 34020
output: 38
thoughts: 24
Thoughts: Okay, let's dive into this. I'm focusing in on `kernel/kcsan/core.c`, starting from line 601. I need to understand what's happening at this specific point. I'm assuming, given the context, that this is related to Kernel Concurrency Sanitizer (KCSAN). I need to quickly grasp the relevant code section to get a handle on the data races that KCSAN is trying to detect and what actions it's taking to address them. I'm looking for the key functions, data structures, and the logic flow at this point in the code. I'm going to parse it quickly for its implications with data races.
|
| 164/4 |
2026/11/19 00:10 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:601 LineCount:100]
Results: map[Contents: 601: * Out of capacity: the size of 'watchpoints', and the frequency
602: * with which should_watch() returns true should be tweaked so
603: * that this case happens very rarely.
604: */
605: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_NO_CAPACITY]);
606: goto out_unlock;
607: }
608:
609: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_SETUP_WATCHPOINTS]);
610: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
611:
612: /*
613: * Read the current value, to later check and infer a race if the data
614: * was modified via a non-instrumented access, e.g. from a device.
615: */
616: old = is_reorder_access ? 0 : read_instrumented_memory(ptr, size);
617:
618: /*
619: * Delay this thread, to increase probability of observing a racy
620: * conflicting access.
621: */
622: delay_access(type);
623:
624: /*
625: * Re-read value, and check if it is as expected; if not, we infer a
626: * racy access.
627: */
628: if (!is_reorder_access) {
629: new = read_instrumented_memory(ptr, size);
630: } else {
631: /*
632: * Reordered accesses cannot be used for value change detection,
633: * because the memory location may no longer be accessible and
634: * could result in a fault.
635: */
636: new = 0;
637: access_mask = 0;
638: }
639:
640: diff = old ^ new;
641: if (access_mask)
642: diff &= access_mask;
643:
644: /*
645: * Check if we observed a value change.
646: *
647: * Also check if the data race should be ignored (the rules depend on
648: * non-zero diff); if it is to be ignored, the below rules for
649: * KCSAN_VALUE_CHANGE_MAYBE apply.
650: */
651: if (diff && !kcsan_ignore_data_race(size, type, old, new, diff))
652: value_change = KCSAN_VALUE_CHANGE_TRUE;
653:
654: /* Check if this access raced with another. */
655: if (!consume_watchpoint(watchpoint)) {
656: /*
657: * Depending on the access type, map a value_change of MAYBE to
658: * TRUE (always report) or FALSE (never report).
659: */
660: if (value_change == KCSAN_VALUE_CHANGE_MAYBE) {
661: if (access_mask != 0) {
662: /*
663: * For access with access_mask, we require a
664: * value-change, as it is likely that races on
665: * ~access_mask bits are expected.
666: */
667: value_change = KCSAN_VALUE_CHANGE_FALSE;
668: } else if (size > 8 || is_assert) {
669: /* Always assume a value-change. */
670: value_change = KCSAN_VALUE_CHANGE_TRUE;
671: }
672: }
673:
674: /*
675: * No need to increment 'data_races' counter, as the racing
676: * thread already did.
677: *
678: * Count 'assert_failures' for each failed ASSERT access,
679: * therefore both this thread and the racing thread may
680: * increment this counter.
681: */
682: if (is_assert && value_change == KCSAN_VALUE_CHANGE_TRUE)
683: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
684:
685: kcsan_report_known_origin(ptr, size, type, ip,
686: value_change, watchpoint - watchpoints,
687: old, new, access_mask);
688: } else if (value_change == KCSAN_VALUE_CHANGE_TRUE) {
689: /* Inferring a race, since the value should not have changed. */
690:
691: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN]);
692: if (is_assert)
693: atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
694:
695: if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN) || is_assert) {
696: kcsan_report_unknown_origin(ptr, size, type, ip,
697: old, new, access_mask);
698: }
699: }
700:
]
|
| 165/4 |
2026/11/19 00:10 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 35795
output: 37
thoughts: 17
Thoughts: Okay, here's my attempt at summarizing the thought process, keeping in mind the user is an expert:
**Diving Back into `core.c` and `check_access`**
Alright, time to refocus. Let's get back to examining `core.c`, specifically around the `check_access` function. I need to refresh my mental map of how that part of the code interacts with the rest of the system. I remember some potential edge cases I wanted to explore more deeply, especially given the recent discussions on access control vulnerabilities. Let's see if anything jumps out this time that I might have missed before. Got to be methodical here, no assumptions. I need to pinpoint every possible control path, consider the data flow, and identify any potential race conditions or authorization bypasses. Let's start from the top...and dig in.
|
| 166/4 |
2026/11/19 00:10 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:701 LineCount:80]
Results: map[Contents: 701: /*
702: * Remove watchpoint; must be after reporting, since the slot may be
703: * reused after this point.
704: */
705: remove_watchpoint(watchpoint);
706: atomic_long_dec(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
707:
708: out_unlock:
709: if (!interrupt_watcher) {
710: raw_cpu_ptr(&kcsan_cpu_ctx)->disable_count--;
711: local_irq_restore(irq_flags);
712: }
713: kcsan_restore_irqtrace(current);
714: ctx->disable_scoped--;
715:
716: /*
717: * Reordered accesses cannot be used for value change detection,
718: * therefore never consider for reordering if access_mask is set.
719: * ASSERT_EXCLUSIVE are not real accesses, ignore them as well.
720: */
721: if (!access_mask && !is_assert)
722: set_reorder_access(ctx, ptr, size, type, ip);
723: out:
724: user_access_restore(ua_flags);
725: }
726:
727: static __always_inline void
728: check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
729: {
730: atomic_long_t *watchpoint;
731: long encoded_watchpoint;
732:
733: /*
734: * Do nothing for 0 sized check; this comparison will be optimized out
735: * for constant sized instrumentation (__tsan_{read,write}N).
736: */
737: if (unlikely(size == 0))
738: return;
739:
740: again:
741: /*
742: * Avoid user_access_save in fast-path: find_watchpoint is safe without
743: * user_access_save, as the address that ptr points to is only used to
744: * check if a watchpoint exists; ptr is never dereferenced.
745: */
746: watchpoint = find_watchpoint((unsigned long)ptr, size,
747: !(type & KCSAN_ACCESS_WRITE),
748: &encoded_watchpoint);
749: /*
750: * It is safe to check kcsan_is_enabled() after find_watchpoint in the
751: * slow-path, as long as no state changes that cause a race to be
752: * detected and reported have occurred until kcsan_is_enabled() is
753: * checked.
754: */
755:
756: if (unlikely(watchpoint != NULL))
757: kcsan_found_watchpoint(ptr, size, type, ip, watchpoint, encoded_watchpoint);
758: else {
759: struct kcsan_ctx *ctx = get_ctx(); /* Call only once in fast-path. */
760:
761: if (unlikely(should_watch(ctx, ptr, size, type))) {
762: kcsan_setup_watchpoint(ptr, size, type, ip);
763: return;
764: }
765:
766: if (!(type & KCSAN_ACCESS_SCOPED)) {
767: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
768:
769: if (reorder_access) {
770: /*
771: * reorder_access check: simulates reordering of
772: * the access after subsequent operations.
773: */
774: ptr = reorder_access->ptr;
775: type = reorder_access->type;
776: ip = reorder_access->ip;
777: /*
778: * Upon a nested interrupt, this context's
779: * reorder_access can be modified (shared ctx).
780: * We know that upon return, reorder_access is
]
|
| 167/4 |
2026/11/19 00:10 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 37259
output: 37
thoughts: 30
Thoughts: Here's my take on the thought process, tailored for an expert audience and presented as a first-person summary:
**Digging into the Core**
Okay, hold on a second! I need to re-evaluate things. My gut is telling me there's something critical here, and I have a hunch where to find it. The place to go is `core.c`. Let's assume that the problem is either with the core algorithm or core data structures.
Alright, I'm zeroing in on lines 770 through 800 of `core.c`. This specific section should be revealing. I need to understand exactly what's going on within that scope and see if there is any obvious issues. I suspect that this code section manages a specific critical task and I need to determine how it performs.
|
| 168/4 |
2026/11/19 00:10 |
tool |
read-file |
0m
Args: map[File:kernel/kcsan/core.c FirstLine:770 LineCount:50]
Results: map[Contents: 770: /*
771: * reorder_access check: simulates reordering of
772: * the access after subsequent operations.
773: */
774: ptr = reorder_access->ptr;
775: type = reorder_access->type;
776: ip = reorder_access->ip;
777: /*
778: * Upon a nested interrupt, this context's
779: * reorder_access can be modified (shared ctx).
780: * We know that upon return, reorder_access is
781: * always invalidated by setting size to 0 via
782: * __tsan_func_exit(). Therefore we must read
783: * and check size after the other fields.
784: */
785: barrier();
786: size = READ_ONCE(reorder_access->size);
787: if (size)
788: goto again;
789: }
790: }
791:
792: /*
793: * Always checked last, right before returning from runtime;
794: * if reorder_access is valid, checked after it was checked.
795: */
796: if (unlikely(ctx->scoped_accesses.prev))
797: kcsan_check_scoped_accesses();
798: }
799: }
800:
801: /* === Public interface ===================================================== */
802:
803: void __init kcsan_init(void)
804: {
805: int cpu;
806:
807: BUG_ON(!in_task());
808:
809: for_each_possible_cpu(cpu)
810: per_cpu(kcsan_rand_state, cpu) = (u32)get_cycles();
811:
812: /*
813: * We are in the init task, and no other tasks should be running;
814: * WRITE_ONCE without memory barrier is sufficient.
815: */
816: if (kcsan_early_enable) {
817: pr_info("enabled early\n");
818: WRITE_ONCE(kcsan_enabled, true);
819: }
]
|
| 169/4 |
2026/11/19 00:10 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 38188
output: 33
thoughts: 72
Thoughts: **Diving into Capability Checks**
Okay, hold on a second! Before I go any further, I need to check something. I'm going to jump into the code and focus on the `kernel/capability.c` file. Specifically, I'm thinking about line 343 and the function `capable_wrt_inode_uidgid`. I want to understand exactly what that part of the kernel does. Then, I need to look at lines 362 and 495, and other related lines. I'm going to immerse myself in the code and truly understand the intricacies of how capabilities are handled within the kernel. Let's read `kernel/capability.c`!
|
| 170/4 |
2026/11/19 00:11 |
tool |
read-file |
0m
Args: map[File:kernel/capability.c FirstLine:330 LineCount:50]
Results: map[Contents: 330: static bool ns_capable_common(struct user_namespace *ns,
331: int cap,
332: unsigned int opts)
333: {
334: int capable;
335:
336: if (unlikely(!cap_valid(cap))) {
337: pr_crit("capable() called with invalid cap=%u\n", cap);
338: BUG();
339: }
340:
341: capable = security_capable(current_cred(), ns, cap, opts);
342: if (capable == 0) {
343: current->flags |= PF_SUPERPRIV;
344: return true;
345: }
346: return false;
347: }
348:
349: /**
350: * ns_capable - Determine if the current task has a superior capability in effect
351: * @ns: The usernamespace we want the capability in
352: * @cap: The capability to be tested for
353: *
354: * Return true if the current task has the given superior capability currently
355: * available for use, false if not.
356: *
357: * This sets PF_SUPERPRIV on the task if the capability is available on the
358: * assumption that it's about to be used.
359: */
360: bool ns_capable(struct user_namespace *ns, int cap)
361: {
362: return ns_capable_common(ns, cap, CAP_OPT_NONE);
363: }
364: EXPORT_SYMBOL(ns_capable);
365:
366: /**
367: * ns_capable_noaudit - Determine if the current task has a superior capability
368: * (unaudited) in effect
369: * @ns: The usernamespace we want the capability in
370: * @cap: The capability to be tested for
371: *
372: * Return true if the current task has the given superior capability currently
373: * available for use, false if not.
374: *
375: * This sets PF_SUPERPRIV on the task if the capability is available on the
376: * assumption that it's about to be used.
377: */
378: bool ns_capable_noaudit(struct user_namespace *ns, int cap)
379: {
]
|
| 171/4 |
2026/11/19 00:11 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 39161
output: 43
thoughts: 63
Thoughts: **Analyzing Potential Security Implications**
Okay, here we go. My focus is immediately drawn to that line: `current->flags |= PF_SUPERPRIV;`. That kind of direct manipulation of process flags is always a potential point of interest. My expert instincts tell me this warrants further investigation.
First, I need to understand the context. Before diving into the code itself, let's establish a potential risk profile. My first step is to quickly search the git history for mentions of `PF_SUPERPRIV` alongside keywords relevant to concurrency issues or data races. KCSAN, in particular, springs to mind as a key tool for identifying such problems. I'll use `git log` to filter the commit history for any instances where `PF_SUPERPRIV` is mentioned in conjunction with either KCSAN or, more broadly, discussions of data races. This approach gives a quick look at the history, and should highlight any past issues, fixes, or discussions related to this specific flag and possible race conditions. Let's see what comes up.
|
| 172/4 |
2026/11/19 00:11 |
tool |
git-log |
0m
Args: map[CodeRegexp:PF_SUPERPRIV Count:10 MessageRegexps:[race|kcsan|PF_SUPERPRIV]]
Results:
|
| 173/4 |
2026/11/19 00:12 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 39495
output: 26
thoughts: 31
Thoughts: Here's my thought process, as requested:
**Debugging the Capability Issue**
Okay, so we've got this capability issue, and it's time to dig in. My first instinct is to zero in on the `kernel/capability.c` file. It's the most likely culprit, so let's start with a focused `git log` command. I'm going to use `git-log` with the `PathPrefix="kernel/capability.c"` filter to see the commit history specifically for that file. Hopefully, that will immediately reveal a recent change that introduced the bug. If that doesn't immediately bear fruit, I'll broaden the search. I'll need to remember that related functionality will be spread out, so I also need to be a little flexible.
Alternatively, if that initial file search doesn't pan out immediately, the next thing I'll check is commit messages, using a keyword search. I'll target commits with messages mentioning `PF_SUPERPRIV`. That constant is pretty specific and strongly related to privilege levels, which is a key symptom we're looking to understand. Hopefully I'll quickly find something relevant to investigate, perhaps a fix or an unintended consequence of some change.
|
| 174/4 |
2026/11/19 00:12 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[PF_SUPERPRIV]]
Results: map[Output:fb14528e4436 seccomp: Set PF_SUPERPRIV when checking capability
cf23705244c9 ptrace: Set PF_SUPERPRIV when checking capability
cc658db47d68 fs: Reorder inode_owner_or_capable() to avoid needless
25b68a8f0ab1 timerfd: Only check CAP_WAKE_ALARM when it is needed
38bf1953987c connector/userns: replace netlink uses of cap_raised() with capable()
39fda8db80c9 userns: Replace netlink uses of cap_raised with capable.
5cd9c58fbe9e security: Fix setting of PF_SUPERPRIV by __capable()
]
|
| 175/4 |
2026/11/19 00:12 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 40001
output: 26
thoughts: 64
Thoughts: Here's my thought process, distilled:
**Reflecting on Kernel/kcsan Debugging Strategies**
Okay, so I'm trying to figure out the best approach to track down this issue. My initial hunch is to delve into the commit history related to `kernel/kcsan`. I figure searching commit messages is a good starting point. I should probably be looking for specific patterns, like occurrences of "0x0," "same task," or "empty stack trace" β things that often signal the kind of problem I'm trying to resolve. However, I might broaden the search to encompass the entire kernel, as the root cause may not be isolated to that subsystem.
Wait, before I go down that path, a more targeted approach might be better. I'm going to start with a `git log` command, specifically targeting the `kernel/kcsan` directory. I'll use the `PathPrefix` option to focus the search. This way, I can streamline things a bit and keep the search scope manageable. That feels like a solid first step.
|
| 176/4 |
2026/11/19 00:13 |
tool |
git-log |
0m
Args: map[Count:50 PathPrefix:kernel/kcsan]
Results: map[Output:0af298e62e5c treewide: refresh kmalloc_obj() conversions
bd3cc16d1d7d kcsan: test: Do not count report printing time against test duration
99b6fcce8703 kcsan: Avoid division by zero in kcsan_prandom_u32_max()
a8488ecbd7ba kcsan: avoid unintended access checking in NMIs
795469820c63 kcsan: test: Adjust "expect" allocation type for kmalloc_obj
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
a9e5620c9a9e kernel: fix off-by-one benign bugs
0eaa911f8908 kcsan: Enable context analysis
b9a214b5f6aa kunit: Pass parameterized test context to generate_params()
800348aa34b2 kcsan: test: Replace deprecated strcpy() with strscpy()
9872916ad1a1 kcsan: test: Initialize dummy variable
aad823aa3a7d treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
b86f7c9fad06 kcsan: Remove redundant call of kallsyms_lookup_name()
59458fa4ddb4 kcsan: Turn report_filterlist_lock into a raw_spinlock
43d631bf06ec kcsan: Use min() to fix Coccinelle warning
ddd7432d621d kcsan: Add missing MODULE_DESCRIPTION() macro
31f605a308e6 kcsan, compiler_types: Introduce __data_racy type qualifier
f12fb73b74fd mm: delete checks for xor_unlock_is_negative_byte()
247dbcdbf790 bitops: add xor_unlock_is_negative_byte()
353e7300a1db kcsan: Don't expect 64 bits atomic builtins from 32 bits architectures
1f6ab566cb3b printk: export console trace point for kcsan/kasan/kfence/kmsan
5eb39cde1e24 kcsan: avoid passing -g for test
8dec88070d96 kcsan: Avoid READ_ONCE() in read_instrumented_memory()
5b24ac2dfd3e kcsan: test: don't put the expect array on the stack
6fcd4267a840 kernel: kcsan: kcsan_test: build without structleak plugin
79cc1ba7badf panic: Consolidate open-coded panic_on_warn checks
e8a533cbeb79 treewide: use get_random_u32_inclusive() when possible
8032bf1233a7 treewide: use get_random_u32_below() instead of deprecated function
6ce625939e58 kcsan: remove rng selftest
7c201739beef kcsan: Instrument memcpy/memset/memmove with newer Clang
197173db990c treewide: use get_random_bytes() when possible
a251c17aa558 treewide: use get_random_u32() when possible
426752b25377 kcsan: test: Add a .kunitconfig to run KCSAN tests
2434031c7cb4 kcsan: test: use new suite_{init,exit} support
5693fa74f98a kcsan: Use preemption model accessors
dd03762ab608 arm64: Enable KCSAN
b473a3891c46 kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
e3d2b72bbf3c kcsan: Avoid nested contexts reading inconsistent reorder_access
a70d36e6a0bd kcsan: Make barrier tests compatible with lockdep
71b0e3aeb282 kcsan: selftest: Add test case to check memory barrier instrumentation
8bc32b348178 kcsan: test: Add test cases for memory barrier instrumentation
7310bd1f3eb9 kcsan: test: Match reordered or normal accesses
be3f6967ec59 kcsan: Show location access was reordered to
3cc21a531252 kcsan: Call scoped accesses reordered in reports
0b8b0830ac14 kcsan: Add core memory barrier instrumentation functions
69562e4983d9 kcsan: Add core support for a subset of weak memory modeling
9756f64c8f2d kcsan: Avoid checking scoped accesses from nested contexts
71f8de7092cb kcsan: Remove redundant zero-initialization of globals
]
|
| 177/4 |
2026/11/19 00:13 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 41618
output: 33
thoughts: 14
Thoughts: Okay, here's my attempt at summarizing that thought process, keeping in mind the expert user and the first-person perspective:
**Diving into the `kernel/kcsan` History**
Alright, time to dig in. The immediate goal is to understand the evolution of the code within `kernel/kcsan`. I need to get a clear picture of how this section of the kernel has been developing. I want to see what changes have been made over time. The best way to do that? Naturally, I'm going to start by reviewing the commit history. That should give me the chronological context I need to grasp the rationale behind the current state of the code and, potentially, identify any patterns or regressions. Looking at those commits will probably tell me the direction the project is headed. Let's see what we can find.
|
| 178/4 |
2026/11/19 00:13 |
tool |
git-log |
0m
Args: map[Count:50 PathPrefix:kernel/kcsan Since:6 years]
Results: map[Output:0af298e62e5c treewide: refresh kmalloc_obj() conversions
bd3cc16d1d7d kcsan: test: Do not count report printing time against test duration
99b6fcce8703 kcsan: Avoid division by zero in kcsan_prandom_u32_max()
a8488ecbd7ba kcsan: avoid unintended access checking in NMIs
795469820c63 kcsan: test: Adjust "expect" allocation type for kmalloc_obj
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
a9e5620c9a9e kernel: fix off-by-one benign bugs
0eaa911f8908 kcsan: Enable context analysis
b9a214b5f6aa kunit: Pass parameterized test context to generate_params()
800348aa34b2 kcsan: test: Replace deprecated strcpy() with strscpy()
9872916ad1a1 kcsan: test: Initialize dummy variable
aad823aa3a7d treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
b86f7c9fad06 kcsan: Remove redundant call of kallsyms_lookup_name()
59458fa4ddb4 kcsan: Turn report_filterlist_lock into a raw_spinlock
43d631bf06ec kcsan: Use min() to fix Coccinelle warning
ddd7432d621d kcsan: Add missing MODULE_DESCRIPTION() macro
31f605a308e6 kcsan, compiler_types: Introduce __data_racy type qualifier
f12fb73b74fd mm: delete checks for xor_unlock_is_negative_byte()
247dbcdbf790 bitops: add xor_unlock_is_negative_byte()
353e7300a1db kcsan: Don't expect 64 bits atomic builtins from 32 bits architectures
1f6ab566cb3b printk: export console trace point for kcsan/kasan/kfence/kmsan
5eb39cde1e24 kcsan: avoid passing -g for test
8dec88070d96 kcsan: Avoid READ_ONCE() in read_instrumented_memory()
5b24ac2dfd3e kcsan: test: don't put the expect array on the stack
6fcd4267a840 kernel: kcsan: kcsan_test: build without structleak plugin
79cc1ba7badf panic: Consolidate open-coded panic_on_warn checks
e8a533cbeb79 treewide: use get_random_u32_inclusive() when possible
8032bf1233a7 treewide: use get_random_u32_below() instead of deprecated function
6ce625939e58 kcsan: remove rng selftest
7c201739beef kcsan: Instrument memcpy/memset/memmove with newer Clang
197173db990c treewide: use get_random_bytes() when possible
a251c17aa558 treewide: use get_random_u32() when possible
426752b25377 kcsan: test: Add a .kunitconfig to run KCSAN tests
2434031c7cb4 kcsan: test: use new suite_{init,exit} support
5693fa74f98a kcsan: Use preemption model accessors
dd03762ab608 arm64: Enable KCSAN
b473a3891c46 kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
e3d2b72bbf3c kcsan: Avoid nested contexts reading inconsistent reorder_access
a70d36e6a0bd kcsan: Make barrier tests compatible with lockdep
71b0e3aeb282 kcsan: selftest: Add test case to check memory barrier instrumentation
8bc32b348178 kcsan: test: Add test cases for memory barrier instrumentation
7310bd1f3eb9 kcsan: test: Match reordered or normal accesses
be3f6967ec59 kcsan: Show location access was reordered to
3cc21a531252 kcsan: Call scoped accesses reordered in reports
0b8b0830ac14 kcsan: Add core memory barrier instrumentation functions
69562e4983d9 kcsan: Add core support for a subset of weak memory modeling
9756f64c8f2d kcsan: Avoid checking scoped accesses from nested contexts
71f8de7092cb kcsan: Remove redundant zero-initialization of globals
]
|
| 179/4 |
2026/11/19 00:13 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 43141
output: 26
thoughts: 96
Thoughts: Okay, let's dive into this.
**Investigating a Kernel Concurrency Issue**
Right, so I need to go back and figure out what's been happening with this concurrency issue. I'm going to start by taking a look at commit `e3d2b72bbf3c`. Let's see... ah, yes. The commit message reads: "kcsan: Avoid nested contexts reading inconsistent reorder_access." Okay, that gives me a starting point. It sounds like there was some kind of data race or ordering problem being addressed, related to kcsan, and dealing with potential inconsistent reads due to reordering.
Now, I'll need a deeper dive. Let's pull up the specific changes associated with commits `e3d2b72bbf3c` using `git show`. I'll also grab `9756f64c8f2d` to see if it provides any context. Iβll need to compare the code changes.
|
| 180/4 |
2026/11/19 00:13 |
tool |
git-show |
0m
Args:
Results: map[Output:commit e3d2b72bbf3c580b0c5c96385777c2f483a45ab5
Author: Marco Elver <elver@google.com>
Date: Mon Dec 6 07:41:50 2021 +0100
kcsan: Avoid nested contexts reading inconsistent reorder_access
Nested contexts, such as nested interrupts or scheduler code, share the
same kcsan_ctx. When such a nested context reads an inconsistent
reorder_access due to an interrupt during set_reorder_access(), we can
observe the following warning:
| ------------[ cut here ]------------
| Cannot find frame for torture_random kernel/torture.c:456 in stack trace
| WARNING: CPU: 13 PID: 147 at kernel/kcsan/report.c:343 replace_stack_entry kernel/kcsan/report.c:343
| ...
| Call Trace:
| <TASK>
| sanitize_stack_entries kernel/kcsan/report.c:351 [inline]
| print_report kernel/kcsan/report.c:409
| kcsan_report_known_origin kernel/kcsan/report.c:693
| kcsan_setup_watchpoint kernel/kcsan/core.c:658
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| ...
| </TASK>
| ---[ end trace ee5299cb933115f5 ]---
| ==================================================================
| BUG: KCSAN: data-race in _raw_spin_lock_irqsave / rcutorture_one_extend
|
| write (reordered) to 0xffffffff8c93b300 of 8 bytes by task 154 on cpu 12:
| queued_spin_lock include/asm-generic/qspinlock.h:80 [inline]
| do_raw_spin_lock include/linux/spinlock.h:185 [inline]
| __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:111 [inline]
| _raw_spin_lock_irqsave kernel/locking/spinlock.c:162
| try_to_wake_up kernel/sched/core.c:4003
| sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1097
| asm_sysvec_apic_timer_interrupt arch/x86/include/asm/idtentry.h:638
| set_reorder_access kernel/kcsan/core.c:416 [inline] <-- inconsistent reorder_access
| kcsan_setup_watchpoint kernel/kcsan/core.c:693
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| rcu_torture_one_read kernel/rcu/rcutorture.c:1600
| rcu_torture_reader kernel/rcu/rcutorture.c:1692
| kthread kernel/kthread.c:327
| ret_from_fork arch/x86/entry/entry_64.S:295
|
| read to 0xffffffff8c93b300 of 8 bytes by task 147 on cpu 13:
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| ...
The warning is telling us that there was a data race which KCSAN wants
to report, but the function where the original access (that is now
reordered) happened cannot be found in the stack trace, which prevents
KCSAN from generating the right stack trace. The stack trace of "write
(reordered)" now only shows where the access was reordered to, but
should instead show the stack trace of the original write, with a final
line saying "reordered to".
At the point where set_reorder_access() is interrupted, it just set
reorder_access->ptr and size, at which point size is non-zero. This is
sufficient (if ctx->disable_scoped is zero) for further accesses from
nested contexts to perform checking of this reorder_access.
That then happened in _raw_spin_lock_irqsave(), which is called by
scheduler code. However, since reorder_access->ip is still stale (ptr
and size belong to a different ip not yet set) this finally leads to
replace_stack_entry() not finding the frame in reorder_access->ip and
generating the above warning.
Fix it by ensuring that a nested context cannot access reorder_access
while we update it in set_reorder_access(): set ctx->disable_scoped for
the duration that reorder_access is updated, which effectively locks
reorder_access and prevents concurrent use by nested contexts. Note,
set_reorder_access() can do the update only if disabled_scoped is zero
on entry, and must therefore set disable_scoped back to non-zero after
the initial check in set_reorder_access().
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index 916060913966..fe12dfe254ec 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -412,11 +412,20 @@ set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
if (!reorder_access || !kcsan_weak_memory)
return;
+ /*
+ * To avoid nested interrupts or scheduler (which share kcsan_ctx)
+ * reading an inconsistent reorder_access, ensure that the below has
+ * exclusive access to reorder_access by disallowing concurrent use.
+ */
+ ctx->disable_scoped++;
+ barrier();
reorder_access->ptr = ptr;
reorder_access->size = size;
reorder_access->type = type | KCSAN_ACCESS_SCOPED;
reorder_access->ip = ip;
reorder_access->stack_depth = get_kcsan_stack_depth();
+ barrier();
+ ctx->disable_scoped--;
}
/*
]
|
| 181/4 |
2026/11/19 00:13 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 45317
output: 27
thoughts: 19
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience, and written in the first person:
**Analyzing Commit 9756f64c8f2d**
Alright, let's dive into commit `9756f64c8f2d`. My initial impression, without even looking at the diff yet, is that based on the commit hash, I'm expecting something specific. I'll bet this is a hotfix. Given the commit message might offer a clue. I'm hoping it's well-formed, descriptive, and clearly outlines the problem it addresses. A generic message is just going to frustrate me.
Now, assuming the message is decent, my next step is immediate: I'm mentally parsing the code changes. I'm not just looking for *what* changed, I'm trying to grasp *why*. What was the root cause being addressed? Are there potential side effects I need to consider? Is this introducing a new dependency or altering existing behaviors? I'll probably start with the most likely problem files.
Iβm immediately looking for signs of careful consideration. Have the developers included any unit tests, regression tests, or integration tests to validate the fix? If not, that's a red flag. I'll need to assess the risk of this change introducing new, unforeseen issues, and how thoroughly the team validated the fix. I'm paying extra attention to security, and any performance regressions. Is there a simple oversight causing massive problems?
Also, I'll be assessing the overall code quality. Are the changes consistent with existing coding style and best practices? Is the code maintainable? Is it readable? Can I understand the logic quickly? This is not just a review of the code in isolation, but how the code integrates with the existing system.
Finally, I'll be thinking about the implications for the future. Is this a band-aid fix or a long-term solution? Does it address the root cause, or just the symptom? Does this fix set a dangerous precedent, and is the risk of doing this acceptable? I have to consider the long-term maintainability. I want to know, is this something that needs to be refactored? Is there a better approach to solving this, and is the team making the best choice?
|
| 182/4 |
2026/11/19 00:14 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 9756f64c8f2d19c0029a5827bda8ac275302ec22
Author: Marco Elver <elver@google.com>
Date: Tue Nov 30 12:44:11 2021 +0100
kcsan: Avoid checking scoped accesses from nested contexts
Avoid checking scoped accesses from nested contexts (such as nested
interrupts or in scheduler code) which share the same kcsan_ctx.
This is to avoid detecting false positive races of accesses in the same
thread with currently scoped accesses: consider setting up a watchpoint
for a non-scoped (normal) access that also "conflicts" with a current
scoped access. In a nested interrupt (or in the scheduler), which shares
the same kcsan_ctx, we cannot check scoped accesses set up in the parent
context -- simply ignore them in this case.
With the introduction of kcsan_ctx::disable_scoped, we can also clean up
kcsan_check_scoped_accesses()'s recursion guard, and do not need to
modify the list's prev pointer.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
diff --git a/include/linux/kcsan.h b/include/linux/kcsan.h
index fc266ecb2a4d..13cef3458fed 100644
--- a/include/linux/kcsan.h
+++ b/include/linux/kcsan.h
@@ -21,6 +21,7 @@
*/
struct kcsan_ctx {
int disable_count; /* disable counter */
+ int disable_scoped; /* disable scoped access counter */
int atomic_next; /* number of following atomic ops */
/*
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index e34a1710b7bc..bd359f8ee63a 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -204,15 +204,17 @@ check_access(const volatile void *ptr, size_t size, int type, unsigned long ip);
static noinline void kcsan_check_scoped_accesses(void)
{
struct kcsan_ctx *ctx = get_ctx();
- struct list_head *prev_save = ctx->scoped_accesses.prev;
struct kcsan_scoped_access *scoped_access;
- ctx->scoped_accesses.prev = NULL; /* Avoid recursion. */
+ if (ctx->disable_scoped)
+ return;
+
+ ctx->disable_scoped++;
list_for_each_entry(scoped_access, &ctx->scoped_accesses, list) {
check_access(scoped_access->ptr, scoped_access->size,
scoped_access->type, scoped_access->ip);
}
- ctx->scoped_accesses.prev = prev_save;
+ ctx->disable_scoped--;
}
/* Rules for generic atomic accesses. Called from fast-path. */
@@ -465,6 +467,15 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned
goto out;
}
+ /*
+ * Avoid races of scoped accesses from nested interrupts (or scheduler).
+ * Assume setting up a watchpoint for a non-scoped (normal) access that
+ * also conflicts with a current scoped access. In a nested interrupt,
+ * which shares the context, it would check a conflicting scoped access.
+ * To avoid, disable scoped access checking.
+ */
+ ctx->disable_scoped++;
+
/*
* Save and restore the IRQ state trace touched by KCSAN, since KCSAN's
* runtime is entered for every memory access, and potentially useful
@@ -578,6 +589,7 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned
if (!kcsan_interrupt_watcher)
local_irq_restore(irq_flags);
kcsan_restore_irqtrace(current);
+ ctx->disable_scoped--;
out:
user_access_restore(ua_flags);
}
]
|
| 183/4 |
2026/11/19 00:14 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 47000
output: 37
thoughts: 71
Thoughts: Okay, let's dive into this kernel investigation.
**Hunting for Interrupt Watcher Configuration and Related Code**
Right, so I need to find all instances in the commit history related to the `CONFIG_KCSAN_INTERRUPT_WATCHER` setting, or anything resembling that functionality. Time to start the hunt, let's see, which also includes the variable `interrupt_watcher`, any references to `other_info` and the `PF_SUPERPRIV` flag. I suspect these are all interelated somehow.
My strategy is clear: I'll use `git log` to methodically comb through the codebase, looking for any commits that touch upon these keywords. I'll need to be thorough; missing a crucial commit could throw off the entire analysis. Let's see what `git log` has in store. I will need to search for the terms `kcsan_interrupt_watcher` and `INTERRUPT_WATCHER`, being case insensitive to be comprehensive.
|
| 184/4 |
2026/11/19 00:14 |
tool |
git-log |
10m
Error:
Args: map[CodeRegexp:CONFIG_KCSAN_INTERRUPT_WATCHER|kcsan_interrupt_watcher]
Results:
|
| 185/4 |
2026/11/19 00:24 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 47352
output: 40
thoughts: 39
Thoughts: Here's my thought process, summarized as you requested:
**KCSAN Git Log Inquiry: Precautions & Precision**
Okay, before I dive in, I need to keep the warning in mind: avoid those overly broad `git-log` queries if I can. They can be performance hogs and generally a bad idea unless absolutely necessary. So, for this investigation, I'm going to be *specific*. I'm zeroing in on the kernel KCSAN code. Let's make sure that `PathPrefix="kernel/kcsan"` is right there in the `git-log` command. This will narrow the scope down and keep things nice and efficient. This focus will give me the information I need, without accidentally pulling in irrelevant data from across the entire repository.
|
| 186/4 |
2026/11/19 00:25 |
tool |
git-log |
0m
Args: map[CodeRegexp:kcsan_interrupt_watcher Count:10 PathPrefix:kernel/kcsan]
Results: map[Output:69562e4983d9 kcsan: Add core support for a subset of weak memory modeling
48b1fc190a18 kcsan: Add option to allow watcher interruptions
]
|
| 187/4 |
2026/11/19 00:25 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 47657
output: 26
thoughts: 38
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in my code and familiar with Git:
**Diving into the Commit Details**
Alright, that commit ID, `48b1fc190a18`, is catching my eye. It feels like a point I need to revisit. I need to get a clear picture of what happened there, what changes were made. So, the natural next step is to examine the commit itself. Let's fire up `git show` with that specific commit hash: `git-show 48b1fc190a18`. That command will pull up the diff, the commit message, the author, everything. That's exactly what I need to refresh my memory and understand the context of those changes. I'm expecting to see what files were modified, and the details of the specific changes. Time to dive in!
|
| 188/4 |
2026/11/19 00:26 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 48b1fc190a180d971fb69217c88c7247f4f2ca19
Author: Marco Elver <elver@google.com>
Date: Fri Feb 21 23:02:09 2020 +0100
kcsan: Add option to allow watcher interruptions
Add option to allow interrupts while a watchpoint is set up. This can be
enabled either via CONFIG_KCSAN_INTERRUPT_WATCHER or via the boot
parameter 'kcsan.interrupt_watcher=1'.
Note that, currently not all safe per-CPU access primitives and patterns
are accounted for, which could result in false positives. For example,
asm-generic/percpu.h uses plain operations, which by default are
instrumented. On interrupts and subsequent accesses to the same
variable, KCSAN would currently report a data race with this option.
Therefore, this option should currently remain disabled by default, but
may be enabled for specific test scenarios.
To avoid new warnings, changes all uses of smp_processor_id() to use the
raw version (as already done in kcsan_found_watchpoint()). The exact SMP
processor id is for informational purposes in the report, and
correctness is not affected.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index 589b1e7f0f25..e7387fec6679 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -21,6 +21,7 @@ static bool kcsan_early_enable = IS_ENABLED(CONFIG_KCSAN_EARLY_ENABLE);
static unsigned int kcsan_udelay_task = CONFIG_KCSAN_UDELAY_TASK;
static unsigned int kcsan_udelay_interrupt = CONFIG_KCSAN_UDELAY_INTERRUPT;
static long kcsan_skip_watch = CONFIG_KCSAN_SKIP_WATCH;
+static bool kcsan_interrupt_watcher = IS_ENABLED(CONFIG_KCSAN_INTERRUPT_WATCHER);
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
@@ -30,6 +31,7 @@ module_param_named(early_enable, kcsan_early_enable, bool, 0);
module_param_named(udelay_task, kcsan_udelay_task, uint, 0644);
module_param_named(udelay_interrupt, kcsan_udelay_interrupt, uint, 0644);
module_param_named(skip_watch, kcsan_skip_watch, long, 0644);
+module_param_named(interrupt_watcher, kcsan_interrupt_watcher, bool, 0444);
bool kcsan_enabled;
@@ -354,7 +356,7 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
unsigned long access_mask;
enum kcsan_value_change value_change = KCSAN_VALUE_CHANGE_MAYBE;
unsigned long ua_flags = user_access_save();
- unsigned long irq_flags;
+ unsigned long irq_flags = 0;
/*
* Always reset kcsan_skip counter in slow-path to avoid underflow; see
@@ -370,26 +372,9 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
goto out;
}
- /*
- * Disable interrupts & preemptions to avoid another thread on the same
- * CPU accessing memory locations for the set up watchpoint; this is to
- * avoid reporting races to e.g. CPU-local data.
- *
- * An alternative would be adding the source CPU to the watchpoint
- * encoding, and checking that watchpoint-CPU != this-CPU. There are
- * several problems with this:
- * 1. we should avoid stealing more bits from the watchpoint encoding
- * as it would affect accuracy, as well as increase performance
- * overhead in the fast-path;
- * 2. if we are preempted, but there *is* a genuine data race, we
- * would *not* report it -- since this is the common case (vs.
- * CPU-local data accesses), it makes more sense (from a data race
- * detection point of view) to simply disable preemptions to ensure
- * as many tasks as possible run on other CPUs.
- *
- * Use raw versions, to avoid lockdep recursion via IRQ flags tracing.
- */
- raw_local_irq_save(irq_flags);
+ if (!kcsan_interrupt_watcher)
+ /* Use raw to avoid lockdep recursion via IRQ flags tracing. */
+ raw_local_irq_save(irq_flags);
watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
if (watchpoint == NULL) {
@@ -507,7 +492,7 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
if (is_assert && value_change == KCSAN_VALUE_CHANGE_TRUE)
kcsan_counter_inc(KCSAN_COUNTER_ASSERT_FAILURES);
- kcsan_report(ptr, size, type, value_change, smp_processor_id(),
+ kcsan_report(ptr, size, type, value_change, raw_smp_processor_id(),
KCSAN_REPORT_RACE_SIGNAL);
} else if (value_change == KCSAN_VALUE_CHANGE_TRUE) {
/* Inferring a race, since the value should not have changed. */
@@ -518,13 +503,14 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN) || is_assert)
kcsan_report(ptr, size, type, KCSAN_VALUE_CHANGE_TRUE,
- smp_processor_id(),
+ raw_smp_processor_id(),
KCSAN_REPORT_RACE_UNKNOWN_ORIGIN);
}
kcsan_counter_dec(KCSAN_COUNTER_USED_WATCHPOINTS);
out_unlock:
- raw_local_irq_restore(irq_flags);
+ if (!kcsan_interrupt_watcher)
+ raw_local_irq_restore(irq_flags);
out:
user_access_restore(ua_flags);
}
diff --git a/lib/Kconfig.kcsan b/lib/Kconfig.kcsan
index f0b791143c6a..081ed2e1bf7b 100644
--- a/lib/Kconfig.kcsan
+++ b/lib/Kconfig.kcsan
@@ -88,6 +88,17 @@ config KCSAN_SKIP_WATCH_RANDOMIZE
KCSAN_WATCH_SKIP. If false, the chosen value is always
KCSAN_WATCH_SKIP.
+config KCSAN_INTERRUPT_WATCHER
+ bool "Interruptible watchers"
+ help
+ If enabled, a task that set up a watchpoint may be interrupted while
+ delayed. This option will allow KCSAN to detect races between
+ interrupted tasks and other threads of execution on the same CPU.
+
+ Currently disabled by default, because not all safe per-CPU access
+ primitives and patterns may be accounted for, and therefore could
+ result in false positives.
+
config KCSAN_REPORT_ONCE_IN_MS
int "Duration in milliseconds, in which any given race is only reported once"
default 3000
]
|
| 189/4 |
2026/11/19 00:26 |
llm |
codeexpert |
1m
Model:
Tokens:
input: 49998
output: 30
thoughts: 2288
Thoughts: **Analyzing the KCSAN Data-Race Report**
Okay, let's break this down. First, I need to understand what's happening in this KCSAN report. The initial output clearly identifies a data race: "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid." I see two accesses to the same memory location, 0xffff888104b4116c, both by task 3283 on CPU 1. One is a read, and the other a read-write. The read-write clearly comes from within `capable_wrt_inode_uidgid`, as shown by its stack trace: `ns_capable_common -> ns_capable -> capable_wrt_inode_uidgid`.
The critical question here is the identity of the two accesses. The report structure in `kernel/kcsan/report.c:print_report` is the key. The function prints information about the "other" access (`other_info`) first and then prints the "current" access (`ai`). By analyzing the code, `other_info` is the first access. Its stack trace is empty (`other_info->num_stack_entries == 0`). This is a key piece of information. `ai` is the second access, which has the stack trace we identified above.
The title "BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid" is printed based on comparing the frame addresses, where `0x0` is `other_frame` and `capable_wrt_inode_uidgid` is `this_frame`.
Now, the important part: what is at 0xffff888104b4116c? The `read-write` access stack clearly indicates the code writes to `current->flags`. This is where `current->flags |= PF_SUPERPRIV;` happens. This clearly shows that KCSAN is observing the write to `current->flags` while the watchpoint is set up by task 3283.
Here's the setup: KCSAN detected a write to `current->flags` and decided to insert a watchpoint for it. The write is a *compound access*, flagged as a read-write. The report identifies that the watchpoint caused a delay via `delay_access()`.
Here is the problem. What happened during the delay? Could another read access by task 3283 on CPU 1, interrupt on CPU 1, cause the race condition? The key is if interrupts were disabled during `delay_access()`. However, the report states that it is not in the case where `CONFIG_KCSAN_INTERRUPT_WATCHER=y` or `kcsan.interrupt_watcher=1`. The crucial thing here is that the report *does* say "by task 3283" for the read, and that its stack entry is `0x0`! If it were an interrupt, the report would have said "interrupt".
It makes me wonder if there's a weak memory modeling issue. I should check `CONFIG_KCSAN_WEAK_MEMORY` and search for related code in `kernel/kcsan/`. Maybe the issue is a reordering of accesses that we can't see with standard reads.
|
| 190/4 |
2026/11/19 00:28 |
tool |
grepper |
0m
Args: map[Expression:reorder_access PathPrefixes:[kernel/kcsan]]
Results: map[Output:kernel/kcsan/core.c=383=static __always_inline void add_kcsan_stack_depth(int val)
--
kernel/kcsan/core.c-391-
kernel/kcsan/core.c:392:static __always_inline struct kcsan_scoped_access *get_reorder_access(struct kcsan_ctx *ctx)
kernel/kcsan/core.c-393-{
kernel/kcsan/core.c-394-#ifdef CONFIG_KCSAN_WEAK_MEMORY
kernel/kcsan/core.c:395: return ctx->disable_scoped ? NULL : &ctx->reorder_access;
kernel/kcsan/core.c-396-#else
--
kernel/kcsan/core.c=401=static __always_inline bool
kernel/kcsan/core.c:402:find_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
kernel/kcsan/core.c-403- int type, unsigned long ip)
kernel/kcsan/core.c-404-{
kernel/kcsan/core.c:405: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
kernel/kcsan/core.c-406-
kernel/kcsan/core.c:407: if (!reorder_access)
kernel/kcsan/core.c-408- return false;
--
kernel/kcsan/core.c-410- /*
kernel/kcsan/core.c:411: * Note: If accesses are repeated while reorder_access is identical,
kernel/kcsan/core.c-412- * never matches the new access, because !(type & KCSAN_ACCESS_SCOPED).
kernel/kcsan/core.c-413- */
kernel/kcsan/core.c:414: return reorder_access->ptr == ptr && reorder_access->size == size &&
kernel/kcsan/core.c:415: reorder_access->type == type && reorder_access->ip == ip;
kernel/kcsan/core.c-416-}
--
kernel/kcsan/core.c=418=static inline void
kernel/kcsan/core.c:419:set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
kernel/kcsan/core.c-420- int type, unsigned long ip)
kernel/kcsan/core.c-421-{
kernel/kcsan/core.c:422: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
kernel/kcsan/core.c-423-
kernel/kcsan/core.c:424: if (!reorder_access || !kcsan_weak_memory)
kernel/kcsan/core.c-425- return;
--
kernel/kcsan/core.c-428- * To avoid nested interrupts or scheduler (which share kcsan_ctx)
kernel/kcsan/core.c:429: * reading an inconsistent reorder_access, ensure that the below has
kernel/kcsan/core.c:430: * exclusive access to reorder_access by disallowing concurrent use.
kernel/kcsan/core.c-431- */
--
kernel/kcsan/core.c-433- barrier();
kernel/kcsan/core.c:434: reorder_access->ptr = ptr;
kernel/kcsan/core.c:435: reorder_access->size = size;
kernel/kcsan/core.c:436: reorder_access->type = type | KCSAN_ACCESS_SCOPED;
kernel/kcsan/core.c:437: reorder_access->ip = ip;
kernel/kcsan/core.c:438: reorder_access->stack_depth = get_kcsan_stack_depth();
kernel/kcsan/core.c-439- barrier();
--
kernel/kcsan/core.c=456=static noinline void kcsan_found_watchpoint(const volatile void *ptr,
--
kernel/kcsan/core.c-481- *
kernel/kcsan/core.c:482: * reorder_access is never created from an access with access_mask set.
kernel/kcsan/core.c-483- */
kernel/kcsan/core.c:484: if (ctx->access_mask && !find_reorder_access(ctx, ptr, size, type, ip))
kernel/kcsan/core.c-485- return;
--
kernel/kcsan/core.c=528=kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-539- unsigned long irq_flags = 0;
kernel/kcsan/core.c:540: bool is_reorder_access;
kernel/kcsan/core.c-541-
--
kernel/kcsan/core.c-567- * 1. Races of the reordered access with interrupts. To avoid, if
kernel/kcsan/core.c:568: * the current access is reorder_access, disable interrupts.
kernel/kcsan/core.c-569- * 2. Avoid races of scoped accesses from nested interrupts (below).
kernel/kcsan/core.c-570- */
kernel/kcsan/core.c:571: is_reorder_access = find_reorder_access(ctx, ptr, size, type, ip);
kernel/kcsan/core.c:572: if (is_reorder_access)
kernel/kcsan/core.c-573- interrupt_watcher = false;
--
kernel/kcsan/core.c-615- */
kernel/kcsan/core.c:616: old = is_reorder_access ? 0 : read_instrumented_memory(ptr, size);
kernel/kcsan/core.c-617-
--
kernel/kcsan/core.c-627- */
kernel/kcsan/core.c:628: if (!is_reorder_access) {
kernel/kcsan/core.c-629- new = read_instrumented_memory(ptr, size);
--
kernel/kcsan/core.c-721- if (!access_mask && !is_assert)
kernel/kcsan/core.c:722: set_reorder_access(ctx, ptr, size, type, ip);
kernel/kcsan/core.c-723-out:
--
kernel/kcsan/core.c=728=check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
--
kernel/kcsan/core.c-766- if (!(type & KCSAN_ACCESS_SCOPED)) {
kernel/kcsan/core.c:767: struct kcsan_scoped_access *reorder_access = get_reorder_access(ctx);
kernel/kcsan/core.c-768-
kernel/kcsan/core.c:769: if (reorder_access) {
kernel/kcsan/core.c-770- /*
kernel/kcsan/core.c:771: * reorder_access check: simulates reordering of
kernel/kcsan/core.c-772- * the access after subsequent operations.
kernel/kcsan/core.c-773- */
kernel/kcsan/core.c:774: ptr = reorder_access->ptr;
kernel/kcsan/core.c:775: type = reorder_access->type;
kernel/kcsan/core.c:776: ip = reorder_access->ip;
kernel/kcsan/core.c-777- /*
kernel/kcsan/core.c-778- * Upon a nested interrupt, this context's
kernel/kcsan/core.c:779: * reorder_access can be modified (shared ctx).
kernel/kcsan/core.c:780: * We know that upon return, reorder_access is
kernel/kcsan/core.c-781- * always invalidated by setting size to 0 via
--
kernel/kcsan/core.c-785- barrier();
kernel/kcsan/core.c:786: size = READ_ONCE(reorder_access->size);
kernel/kcsan/core.c-787- if (size)
--
kernel/kcsan/core.c-793- * Always checked last, right before returning from runtime;
kernel/kcsan/core.c:794: * if reorder_access is valid, checked after it was checked.
kernel/kcsan/core.c-795- */
--
kernel/kcsan/core.c=969=EXPORT_SYMBOL(__kcsan_check_access);
--
kernel/kcsan/core.c-973- { \
kernel/kcsan/core.c:974: struct kcsan_scoped_access *sa = get_reorder_access(get_ctx()); \
kernel/kcsan/core.c-975- if (!sa) \
--
kernel/kcsan/core.c=1096=DEFINE_TSAN_VOLATILE_READ_WRITE(16);
--
kernel/kcsan/core.c-1098-/*
kernel/kcsan/core.c:1099: * Function entry and exit are used to determine the validty of reorder_access.
kernel/kcsan/core.c-1100- * Reordering of the access ends at the end of the function scope where the
--
kernel/kcsan/core.c=1120=noinline void __tsan_func_exit(void)
kernel/kcsan/core.c-1121-{
kernel/kcsan/core.c:1122: struct kcsan_scoped_access *reorder_access;
kernel/kcsan/core.c-1123-
--
kernel/kcsan/core.c-1126-
kernel/kcsan/core.c:1127: reorder_access = get_reorder_access(get_ctx());
kernel/kcsan/core.c:1128: if (!reorder_access)
kernel/kcsan/core.c-1129- goto out;
kernel/kcsan/core.c-1130-
kernel/kcsan/core.c:1131: if (get_kcsan_stack_depth() <= reorder_access->stack_depth) {
kernel/kcsan/core.c-1132- /*
--
kernel/kcsan/core.c-1138- */
kernel/kcsan/core.c:1139: check_access(reorder_access->ptr, reorder_access->size,
kernel/kcsan/core.c:1140: reorder_access->type, reorder_access->ip);
kernel/kcsan/core.c:1141: reorder_access->size = 0;
kernel/kcsan/core.c:1142: reorder_access->stack_depth = INT_MIN;
kernel/kcsan/core.c-1143- }
--
kernel/kcsan/kcsan_test.c=560=static void test_barrier_nothreads(struct kunit *test)
--
kernel/kcsan/kcsan_test.c-562-#ifdef CONFIG_KCSAN_WEAK_MEMORY
kernel/kcsan/kcsan_test.c:563: struct kcsan_scoped_access *reorder_access = ¤t->kcsan_ctx.reorder_access;
kernel/kcsan/kcsan_test.c-564-#else
kernel/kcsan/kcsan_test.c:565: struct kcsan_scoped_access *reorder_access = NULL;
kernel/kcsan/kcsan_test.c-566-#endif
--
kernel/kcsan/kcsan_test.c-569-
kernel/kcsan/kcsan_test.c:570: KCSAN_TEST_REQUIRES(test, reorder_access != NULL);
kernel/kcsan/kcsan_test.c-571- KCSAN_TEST_REQUIRES(test, IS_ENABLED(CONFIG_SMP));
--
kernel/kcsan/kcsan_test.c-574- do { \
kernel/kcsan/kcsan_test.c:575: reorder_access->type = (access_type) | KCSAN_ACCESS_SCOPED; \
kernel/kcsan/kcsan_test.c:576: reorder_access->size = sizeof(test_var); \
kernel/kcsan/kcsan_test.c-577- barrier; \
kernel/kcsan/kcsan_test.c:578: KUNIT_EXPECT_EQ_MSG(test, reorder_access->size, \
kernel/kcsan/kcsan_test.c-579- order_before ? 0 : sizeof(test_var), \
--
kernel/kcsan/kcsan_test.c-594-
kernel/kcsan/kcsan_test.c:595: /* Force creating a valid entry in reorder_access first. */
kernel/kcsan/kcsan_test.c-596- test_var = 0;
kernel/kcsan/kcsan_test.c:597: while (test_var++ < 1000000 && reorder_access->size != sizeof(test_var))
kernel/kcsan/kcsan_test.c-598- __kcsan_check_read(&test_var, sizeof(test_var));
kernel/kcsan/kcsan_test.c:599: KUNIT_ASSERT_EQ(test, reorder_access->size, sizeof(test_var));
kernel/kcsan/kcsan_test.c-600-
--
kernel/kcsan/selftest.c=110=static bool __init test_barrier(void)
--
kernel/kcsan/selftest.c-112-#ifdef CONFIG_KCSAN_WEAK_MEMORY
kernel/kcsan/selftest.c:113: struct kcsan_scoped_access *reorder_access = ¤t->kcsan_ctx.reorder_access;
kernel/kcsan/selftest.c-114-#else
kernel/kcsan/selftest.c:115: struct kcsan_scoped_access *reorder_access = NULL;
kernel/kcsan/selftest.c-116-#endif
--
kernel/kcsan/selftest.c-121-
kernel/kcsan/selftest.c:122: if (!reorder_access || !IS_ENABLED(CONFIG_SMP))
kernel/kcsan/selftest.c-123- return true;
--
kernel/kcsan/selftest.c-126- do { \
kernel/kcsan/selftest.c:127: reorder_access->type = (access_type) | KCSAN_ACCESS_SCOPED; \
kernel/kcsan/selftest.c:128: reorder_access->size = 1; \
kernel/kcsan/selftest.c-129- barrier; \
kernel/kcsan/selftest.c:130: if (reorder_access->size != 0) { \
kernel/kcsan/selftest.c-131- pr_err("improperly instrumented type=(" #access_type "): " name "\n"); \
]
|
| 191/4 |
2026/11/19 00:28 |
llm |
codeexpert |
4m
Model:
Tokens:
input: 57339
output: 1363
thoughts: 23542
Thoughts: **KCSAN Report Analysis: Data Race on `current->flags`**
Alright, let's dissect this KCSAN report. The crux of the matter is understanding how a data race can be reported on the *same* task and CPU, with an empty stack trace for one of the accesses. Here's my breakdown, drawing on my expertise and the insights I've gleaned from the kernel code and my knowledge of KCSAN:
First, the report describes a "data-race" on `current->flags` within the `ns_capable_common` function during a call to `current->flags |= PF_SUPERPRIV`. This, in essence, is a read-modify-write operation (read of `current->flags`, bitwise OR with `PF_SUPERPRIV`, then write back). With KCSAN's instrumentation enabled (`-fsanitize=thread`), this translates into a `__tsan_read4` (read) and `__tsan_write4` (write).
Now, the KCSAN report shows two accesses to the same memory location (`0xffff888104b4116c` β `current->flags`), by the *same* task (3283) and on the *same* CPU (1). One access is labeled "read" with an empty stack trace/function `0x0`, while the other is "read-write" within the `capable_wrt_inode_uidgid` call stack. The "read" report implies a data race with an earlier, conflicting read access.
The puzzle is how can these happen on the *same* task and CPU? This is where the configuration `CONFIG_KCSAN_INTERRUPT_WATCHER` (or `kcsan.interrupt_watcher=1`) comes into play. By default, KCSAN disables interrupts when a watchpoint is active (in `delay_access`). This is to avoid triggering races on the same CPU with interrupts or preemption. However, when `CONFIG_KCSAN_INTERRUPT_WATCHER` is set, KCSAN does *not* disable interrupts (to catch same-CPU races with interrupts and other data in a thread).
Here's the scenario: Task 3283 begins executing `current->flags |= PF_SUPERPRIV`. KCSAN sets a watchpoint on `current->flags` because of this compound, "read-write" operation, and enters `udelay()` to enforce the race condition. At this precise moment, an interrupt, such as a timer interrupt or scheduler tick occurs *on the same CPU*.
Because interrupts are not disabled, the interrupt handler executes. The scheduler, running *within the context of* the now interrupted task 3283 or, more precisely, the scheduler reading `current->flags`, potentially during a context switch from an interrupt return, reads `current->flags`. This read now matches the watchpoint and is reported. Note that `in_task()` is `TRUE` (because it's the current task being scheduled, even though it's the same task), so the task ID is correctly 3283.
Why then is the stack trace empty/0x0? In the stack unwinding process:
1. `stack_trace_save` is called, but the stack trace is not captured.
2. If the execution had occurred in the interrupt or during a scheduler context switch (often across assembly entry/exit code), the stack unwind may fail.
3. The unwinder often cannot handle that transition, or, more importantly, `get_stack_skipnr` filters out all frames for runtime functions (e.g. `kcsan_` or `tsan_`), which often leads to skipping all frames and an empty trace.
Ultimately, `other_info->num_stack_entries` becomes 0, and the report displays an empty stack trace and function `0x0`.
Finally, is this data race harmful? No, in this specific case, it's benign. The key is to understand the purpose of `PF_SUPERPRIV`. It's used in process accounting, specifically by `acct_process` to indicate whether the task used superuser privileges. Concurrent reads of `current->flags` are safe due to single-copy atomicity of 32-bit aligned reads/writes on supported architectures (x86, ARM64), which does not have any potential for word tearing on aligned writes. Therefore, the reads cannot lead to corrupt data values. Furthermore, `current->flags` is strictly modified only by the task itself (or scheduler). So a concurrent read can only see `current->flags` before or after `|=`, so there is no undefined behavior (in practice) or code to introduce. The KCSAN report has revealed a data race in
|
| 192/4 |
2026/11/19 00:32 |
tool |
set-results |
0m
Args: map[Answer:### 1. How KCSAN Produces a Report on the Same Task and CPU with Function 0x0 and an Empty Stack Trace
In standard operation, KCSAN monitors concurrent accesses from different threads/CPUs. However, a report can show both accesses occurring on the same task and CPU (`task 3283 on cpu 1`), with the conflicting access having an empty stack trace and function `0x0`:
1. **Watchpoint Setup by Task 3283:**
- Task 3283 executes `capable_wrt_inode_uidgid()` -> `ns_capable()` -> `ns_capable_common()`.
- At `kernel/capability.c:343`, it executes `current->flags |= PF_SUPERPRIV;`.
- Because `current->flags` is accessed non-atomically via a compound read-modify-write (`read-write`), KCSAN's instrumentation sets up a watchpoint on `¤t->flags` (`0xffff888104b4116c`) in `kcsan_setup_watchpoint()`.
- Task 3283 enters a busy delay loop in `delay_access()` (`udelay()`) to wait for potential concurrent accesses.
2. **Interruption / Preemption on the Same CPU:**
- While task 3283 is delayed inside `kcsan_setup_watchpoint()`, an interrupt (such as a timer tick) occurs on CPU 1.
- If kernel preemption (`CONFIG_PREEMPT` / `CONFIG_PREEMPTION`) is enabled, the return-from-interrupt path triggers preemption (`preempt_schedule_irq()`), invoking the scheduler (`schedule()`).
- The scheduler runs in task context (`in_task()` is true) on CPU 1 while `current` is still task 3283.
- During scheduling or context switching, the scheduler reads `current->flags` (e.g., checking flags like `PF_KTHREAD`, `PF_IDLE`, etc.).
3. **Triggering and Consuming the Watchpoint:**
- The scheduler's read of `current->flags` hits the active watchpoint previously inserted by task 3283 for the exact same address (`0xffff888104b4116c`).
- `kcsan_found_watchpoint()` detects the match and consumes the watchpoint, recording `other_info` with `task_pid = 3283`, `cpu_id = 1`, and `access_type = read`.
4. **Why Function `0x0` and Empty Stack Trace:**
- In `prepare_report_producer()`, KCSAN calls `stack_trace_save()` to record the call stack of the conflicting access.
- In low-level scheduler code, assembly entry/exit trampolines, or unwinder-unfriendly preemption transitions, stack unwinding (e.g., via ORC or frame pointers) can fail and return 0 frames. Alternatively, if frames consist entirely of runtime/scheduler functions that are skipped by `get_stack_skipnr()`, `num_stack_entries` effectively becomes 0.
- When `num_stack_entries` is 0:
- `print_stack_trace()` prints no lines (an empty stack trace).
- The top frame address defaults to `0` (`0x0`).
- KCSAN formats the report title using `%ps` on the top frames, resulting in:
`BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid`.
---
### 2. What Mechanism in KCSAN Causes This
This behavior is caused by **`CONFIG_KCSAN_INTERRUPT_WATCHER=y`** (or the boot parameter **`kcsan.interrupt_watcher=1`**):
- By default, KCSAN disables local interrupts via `local_irq_save()` while a watchpoint is active in `kcsan_setup_watchpoint()`. This is done specifically to prevent reporting false positive or misleading data races on thread-local or CPU-local variables caused by interrupts or preemption on the same CPU.
- When `CONFIG_KCSAN_INTERRUPT_WATCHER` is enabled, KCSAN leaves interrupts enabled during watchpoint delays. This allows interrupts and subsequent kernel preemption on the same CPU while the watchpoint is held, enabling KCSAN to detect races between interrupted tasks and subsequent execution contexts on the same CPU.
---
### 3. Is the Data Race on `current->flags |= PF_SUPERPRIV` Benign or Harmful?
This data race is **benign**:
1. **Purpose of `PF_SUPERPRIV`:**
`PF_SUPERPRIV` ("used superuser privileges") is purely an accounting flag, primarily read by BSD process accounting (`kernel/acct.c`) when a process exits (`acct_process()`). It does not affect security decisions, capability permissions, or task execution flow.
2. **Single-Writer Invariant:**
`current->flags` is strictly modified by the task itself in task context. No other CPU, task, or interrupt handler writes to `task->flags` concurrently. Therefore, the non-atomic compound read-modify-write (`|=`) will never suffer from lost updates or clobbered bits due to concurrent writes.
3. **Single-Copy Atomicity:**
On all supported modern architectures (x86, ARM64, etc.), aligned 32-bit reads and writes are single-copy atomic. Any concurrent reader (such as the scheduler or `/proc` inspection) will atomically observe either the old flag value or the new value with `PF_SUPERPRIV` set, without word tearing or corrupted values.
---
### Caveats and Unverified Parts
- The exact stack unwinder behavior (whether ORC unwinder stopped at the interrupt/scheduler boundary or all frames were filtered by `get_stack_skipnr`) depends on compiler and architecture configuration, but both lead to the observed 0-entry stack trace and `0x0` symbol.]
Results: map[Answer:### 1. How KCSAN Produces a Report on the Same Task and CPU with Function 0x0 and an Empty Stack Trace
In standard operation, KCSAN monitors concurrent accesses from different threads/CPUs. However, a report can show both accesses occurring on the same task and CPU (`task 3283 on cpu 1`), with the conflicting access having an empty stack trace and function `0x0`:
1. **Watchpoint Setup by Task 3283:**
- Task 3283 executes `capable_wrt_inode_uidgid()` -> `ns_capable()` -> `ns_capable_common()`.
- At `kernel/capability.c:343`, it executes `current->flags |= PF_SUPERPRIV;`.
- Because `current->flags` is accessed non-atomically via a compound read-modify-write (`read-write`), KCSAN's instrumentation sets up a watchpoint on `¤t->flags` (`0xffff888104b4116c`) in `kcsan_setup_watchpoint()`.
- Task 3283 enters a busy delay loop in `delay_access()` (`udelay()`) to wait for potential concurrent accesses.
2. **Interruption / Preemption on the Same CPU:**
- While task 3283 is delayed inside `kcsan_setup_watchpoint()`, an interrupt (such as a timer tick) occurs on CPU 1.
- If kernel preemption (`CONFIG_PREEMPT` / `CONFIG_PREEMPTION`) is enabled, the return-from-interrupt path triggers preemption (`preempt_schedule_irq()`), invoking the scheduler (`schedule()`).
- The scheduler runs in task context (`in_task()` is true) on CPU 1 while `current` is still task 3283.
- During scheduling or context switching, the scheduler reads `current->flags` (e.g., checking flags like `PF_KTHREAD`, `PF_IDLE`, etc.).
3. **Triggering and Consuming the Watchpoint:**
- The scheduler's read of `current->flags` hits the active watchpoint previously inserted by task 3283 for the exact same address (`0xffff888104b4116c`).
- `kcsan_found_watchpoint()` detects the match and consumes the watchpoint, recording `other_info` with `task_pid = 3283`, `cpu_id = 1`, and `access_type = read`.
4. **Why Function `0x0` and Empty Stack Trace:**
- In `prepare_report_producer()`, KCSAN calls `stack_trace_save()` to record the call stack of the conflicting access.
- In low-level scheduler code, assembly entry/exit trampolines, or unwinder-unfriendly preemption transitions, stack unwinding (e.g., via ORC or frame pointers) can fail and return 0 frames. Alternatively, if frames consist entirely of runtime/scheduler functions that are skipped by `get_stack_skipnr()`, `num_stack_entries` effectively becomes 0.
- When `num_stack_entries` is 0:
- `print_stack_trace()` prints no lines (an empty stack trace).
- The top frame address defaults to `0` (`0x0`).
- KCSAN formats the report title using `%ps` on the top frames, resulting in:
`BUG: KCSAN: data-race in 0x0 / capable_wrt_inode_uidgid`.
---
### 2. What Mechanism in KCSAN Causes This
This behavior is caused by **`CONFIG_KCSAN_INTERRUPT_WATCHER=y`** (or the boot parameter **`kcsan.interrupt_watcher=1`**):
- By default, KCSAN disables local interrupts via `local_irq_save()` while a watchpoint is active in `kcsan_setup_watchpoint()`. This is done specifically to prevent reporting false positive or misleading data races on thread-local or CPU-local variables caused by interrupts or preemption on the same CPU.
- When `CONFIG_KCSAN_INTERRUPT_WATCHER` is enabled, KCSAN leaves interrupts enabled during watchpoint delays. This allows interrupts and subsequent kernel preemption on the same CPU while the watchpoint is held, enabling KCSAN to detect races between interrupted tasks and subsequent execution contexts on the same CPU.
---
### 3. Is the Data Race on `current->flags |= PF_SUPERPRIV` Benign or Harmful?
This data race is **benign**:
1. **Purpose of `PF_SUPERPRIV`:**
`PF_SUPERPRIV` ("used superuser privileges") is purely an accounting flag, primarily read by BSD process accounting (`kernel/acct.c`) when a process exits (`acct_process()`). It does not affect security decisions, capability permissions, or task execution flow.
2. **Single-Writer Invariant:**
`current->flags` is strictly modified by the task itself in task context. No other CPU, task, or interrupt handler writes to `task->flags` concurrently. Therefore, the non-atomic compound read-modify-write (`|=`) will never suffer from lost updates or clobbered bits due to concurrent writes.
3. **Single-Copy Atomicity:**
On all supported modern architectures (x86, ARM64, etc.), aligned 32-bit reads and writes are single-copy atomic. Any concurrent reader (such as the scheduler or `/proc` inspection) will atomically observe either the old flag value or the new value with `PF_SUPERPRIV` set, without word tearing or corrupted values.
---
### Caveats and Unverified Parts
- The exact stack unwinder behavior (whether ORC unwinder stopped at the interrupt/scheduler boundary or all frames were filtered by `get_stack_skipnr`) depends on compiler and architecture configuration, but both lead to the observed 0-entry stack trace and `0x0` symbol.]
|
| 193/2 |
2026/11/19 00:32 |
llm |
expert |
1m
Model:
Tokens:
input: 100822
output: 15
thoughts: 1774
Thoughts: **Analyzing the Data Race on `current->flags` and `PF_SUPERPRIV`**
Okay, this looks like a textbook example. Let's methodically dissect this data race involving `current->flags` and the `PF_SUPERPRIV` flag, making sure to stick to the protocol instructions meticulously.
First, let's reference the protocol: this should be a "BENIGN" data race, where the logic is sound and can withstand compiler optimizations. These usually involve diagnostics, statistics, or single-writer flag updates.
We need to confirm who modifies `task->flags`, specifically `current->flags`. According to Linux kernel design, each task primarily modifies *its own* `current->flags`. We need to verify if other code modifies a task's flags.
I know from experience that `copy_process` in `kernel/fork.c`, `kthread_create` / `kthread_worker` / `init_idle` and other initializers touch these flags *before* a task becomes active. More importantly, when a task is running, only `current` can modify its own `current->flags`.
A critical point: the `PF_SUPERPRIV` flag is only modified by `current` since the bug fix in commit 5cd9c58fbe9e, where `__capable()` was setting `PF_SUPERPRIV` on other tasks, which had to be removed. Thus, no external task is writing `task->flags` apart from initialization. This is a very important point!
Now, let's review where `PF_SUPERPRIV` is *read*. Grepping the entire kernel, we find only a handful of places. These are in `acct_collect` (BSD process accounting on exit), `bacct_add_tsk` (taskstats accounting), and `kernel/fork.c`, where this flag is cleared for the child process. It is also set by the `cap_mmap_addr` and `capable` function, in `security/commoncap.c` and `kernel/capability.c` respectively. Thus, the flag is solely used to indicate that superuser privileges *were* used, and is related to accounting.
Can a concurrent read be affected by the write of `current->flags |= PF_SUPERPRIV`? The answer is no. `unsigned int flags` is a 32-bit scalar, and 32-bit reads/writes are atomic. There's no tearing, and readers use bitwise masks. Because `PF_SUPERPRIV` is bit 0x100 and no other code path touches this, there's no way to clobber other bits or corrupt flags. Observing either value is perfectly safe. `current->flags |= PF_SUPERPRIV` is a single-writer.
Let's confirm the "BENIGN" criteria again: single-writer flag updates, the flag is for diagnostics/accounting, concurrent readers perform bitwise checks, and aligned 32-bit word access without tearing. This is a perfect match!
The `READ_ONCE()` / `WRITE_ONCE()` macros seem unnecessary here, as are `data_race` annotations. This is a clear case of a single-writer flag update.
Finally, we need to call `set-results`. The parameters are `Benign` and optionally `FailureDetectableBy`. Since it's benign, `FailureDetectableBy` is optional. Therefore, the call should be `set-results({Benign: true})`.
|
| 194/2 |
2026/11/19 00:34 |
tool |
set-results |
0m
Args:
Results: map[Benign:true FailureDetectableBy:]
|
| 195/2 |
2026/11/19 00:34 |
llm |
expert |
1m
Model:
Tokens:
input: 103372
output: 547
thoughts: 162
Thoughts: Okay, here's my summarized thought process, as if it were my own:
**Final Reply Construction: All Systems Go**
Excellent, the `set-results` step worked flawlessly. Now, I'm ready to craft the final response, following the established protocol. I need to make sure I hit all the key points.
First, the **Race Summary:** That will clearly lay out the conflict β it's a battle between `[Function A]` and `[Function B]` over `[Variable/Field]`. Concise and focused, that's what we want.
Next, the **Synchronization context:** I have to detail the locks involved β what's being held, and most importantly, why mutual exclusion isnβt truly an issue here. Transparency is key.
Then comes the **Final Classification:** Itβs either going to be a **BENIGN** race or, unfortunately, **HARMFUL**. Iβve done my homework; I have a clear understanding of the situation.
If it's **BENIGN**, I need to justify it. The **Reasoning** section will briefly explain *why* this race is structurally tolerant. This will involve pinpointing if it's the nature of the data/reads or if the tearing affects diagnostics or stats and not the core functionality.
Finally, the **Recommended Annotations:** I'll suggest the appropriate annotations. This will ensure that future analysis is more informative and precise. I'll include things like `READ_ONCE()`, `WRITE_ONCE()`, or even a `data_race()` marker where appropriate.
Yep, everything is clear in my mind. The investigation is complete, and I'm ready to write a solid, well-reasoned response.
|
| 196/1 |
2026/11/19 00:35 |
action |
format-explanation |
0m
Results: map[Explanation:### Race Summary
- **Racing Functions:** Low-level kernel context / scheduler read (reported as
`0x0`) vs `capable_wrt_inode_uidgid()` (`ns_capable_common()`) on
`current->flags`.
- **Variable/Field:** `current->flags` (specifically the `PF_SUPERPRIV` bit in
`task_struct::flags`).
---
### Synchronization Context
`current->flags` contains per-task state flags (`PF_*`). By kernel design,
`current->flags` is strictly single-writer: each task only modifies its own
`current->flags` in task context without explicit lock protection. When
`CONFIG_KCSAN_INTERRUPT_WATCHER=y` is enabled, KCSAN leaves interrupts enabled
during its watchpoint delay loop (`delay_access()`). An interrupt or subsequent
kernel preemption on the same CPU allows the scheduler or an interrupt handler
to read `current->flags` (e.g., checking `PF_KTHREAD` or `PF_WQ_WORKER`) while
the task is paused during a compound RMW (`current->flags |= PF_SUPERPRIV`).
Low-level entry/exit or scheduler frames skipped by the unwinder result in the
0-entry stack trace and `0x0` symbol.
---
### Final Classification: BENIGN
#### Reasoning
1. **Single-Writer Safety:** Only the task itself (`current`) writes to
`current->flags`. No other CPU, task, or interrupt handler mutates this field
concurrently, eliminating any hazard of lost updates or clobbered bits.
2. **Purely Accounting Flag:** `PF_SUPERPRIV` ("used superuser privileges") is
purely an accounting indicator used for BSD process accounting (`kernel/acct.c`)
and taskstats (`kernel/tsacct.c`) when recording process exit statistics
(`ac_flag |= ASU`). It is never checked for security or capability authorization
decisions.
3. **Single-Copy Atomicity & Bit Independence:** `task_struct::flags` is an
aligned 32-bit unsigned integer. On all supported architectures, 32-bit aligned
reads and writes are single-copy atomic. Any concurrent reader checks
independent bits (e.g., `flags & PF_...`) and will safely observe either the old
value or the new value with `PF_SUPERPRIV` set without word tearing.
#### Recommended Annotations
If silence from KCSAN is desired, the update can be marked with `data_race()`:
```c
data_race(current->flags |= PF_SUPERPRIV);
```]
|