| 0/0 |
2026/08/26 17:23 |
flow |
patching |
1h06m
Results: map[AckedBy:[] Fixes:map[AuthorEmail:torvalds@ppc970.osdl.org AuthorName:Linus Torvalds Hash:1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Title:Linux-2.6.12-rc2] KernelBranch:master KernelCommit:8d3ae59288f1e7d58d76558a6ee96d533bc5019f KernelRepo:git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git PatchDescription:befs: validate block_shift and ag_shift in superblock
When mounting a BeFS filesystem, befs_fill_super() calls befs_check_sb() to
validate filesystem parameters loaded from the superblock. During
consistency checks, befs_check_sb() evaluates expressions (1 <<
befs_sb->block_shift) and (1 << befs_sb->ag_shift). Because block_shift and
ag_shift are 32-bit values read directly from the disk image without prior
bounds checking, a corrupted or crafted filesystem image with shift
exponents >= 32 triggers undefined behavior and causes UBSAN
shift-out-of-bounds warnings:
UBSAN: shift-out-of-bounds in fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Additionally, if an invalid ag_shift >= 32 is allowed to pass superblock
validation, it causes further shift-out-of-bounds issues during subsequent
address calculations in iaddr2blockno() and blockno2iaddr(). Furthermore,
in those translation helpers, iaddr->allocation_group is a 32-bit integer,
and shifting it left by ag_shift before promotion causes 32-bit integer
truncation for large allocation groups.
Fix these issues by:
- Checking that block_shift < 32 and ag_shift < 32 before shifting, and
using unsigned integer literals (1U) in befs_check_sb().
- Treating ag_shift >= 32 as a fatal error in befs_check_sb().
- Casting allocation_group to befs_blocknr_t prior to left-shifting in
iaddr2blockno() and blockno2iaddr(). PatchDiff:diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
Recipients:[map[Email:linux-kernel@vger.kernel.org Name: To:true] map[Email:luisbg@kernel.org Name:Luis de Bethencourt To:true] map[Email:salah.triki@gmail.com Name:Salah Triki To:true] map[Email:torvalds@ppc970.osdl.org Name:Linus Torvalds To:true]] ReportedBy:[] ReviewedBy:[] SuggestedBy:[] TestedBy:[]]
|
| 1/1 |
2026/08/26 17:23 |
action |
base-commit-picker |
0m
Results: map[KernelBranch:master KernelCommit:8d3ae59288f1e7d58d76558a6ee96d533bc5019f KernelRepo:git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git]
|
| 2/1 |
2026/08/26 17:23 |
action |
syz-repro-to-c-repro |
0m
Results: map[SimplifiedCRepro:// autogenerated by syzkaller (https://github.com/google/syzkaller)
#define _GNU_SOURCE
#include <endian.h>
#include <errno.h>
#include <fcntl.h>
#include <setjmp.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
#include <linux/loop.h>
#ifndef __NR_memfd_create
#define __NR_memfd_create 319
#endif
static unsigned long long procid;
//% This code is derived from puff.{c,h}, found in the zlib development. The
//% original files come with the following copyright notice:
//% Copyright (C) 2002-2013 Mark Adler, all rights reserved
//% version 2.3, 21 Jan 2013
//% This software is provided 'as-is', without any express or implied
//% warranty. In no event will the author be held liable for any damages
//% arising from the use of this software.
//% Permission is granted to anyone to use this software for any purpose,
//% including commercial applications, and to alter it and redistribute it
//% freely, subject to the following restrictions:
//% 1. The origin of this software must not be misrepresented; you must not
//% claim that you wrote the original software. If you use this software
//% in a product, an acknowledgment in the product documentation would be
//% appreciated but is not required.
//% 2. Altered source versions must be plainly marked as such, and must not be
//% misrepresented as being the original software.
//% 3. This notice may not be removed or altered from any source distribution.
//% Mark Adler madler@alumni.caltech.edu
//% BEGIN CODE DERIVED FROM puff.{c,h}
#define MAXBITS 15
#define MAXLCODES 286
#define MAXDCODES 30
#define MAXCODES (MAXLCODES + MAXDCODES)
#define FIXLCODES 288
struct puff_state {
unsigned char* out;
unsigned long outlen;
unsigned long outcnt;
const unsigned char* in;
unsigned long inlen;
unsigned long incnt;
int bitbuf;
int bitcnt;
jmp_buf env;
};
static int puff_bits(struct puff_state* s, int need)
{
long val = s->bitbuf;
while (s->bitcnt < need) {
if (s->incnt == s->inlen)
longjmp(s->env, 1);
val |= (long)(s->in[s->incnt++]) << s->bitcnt;
s->bitcnt += 8;
}
s->bitbuf = (int)(val >> need);
s->bitcnt -= need;
return (int)(val & ((1L << need) - 1));
}
static int puff_stored(struct puff_state* s)
{
s->bitbuf = 0;
s->bitcnt = 0;
if (s->incnt + 4 > s->inlen)
return 2;
unsigned len = s->in[s->incnt++];
len |= s->in[s->incnt++] << 8;
if (s->in[s->incnt++] != (~len & 0xff) ||
s->in[s->incnt++] != ((~len >> 8) & 0xff))
return -2;
if (s->incnt + len > s->inlen)
return 2;
if (s->outcnt + len > s->outlen)
return 1;
for (; len--; s->outcnt++, s->incnt++) {
if (s->in[s->incnt])
s->out[s->outcnt] = s->in[s->incnt];
}
return 0;
}
struct puff_huffman {
short* count;
short* symbol;
};
static int puff_decode(struct puff_state* s, const struct puff_huffman* h)
{
int first = 0;
int index = 0;
int bitbuf = s->bitbuf;
int left = s->bitcnt;
int code = first = index = 0;
int len = 1;
short* next = h->count + 1;
while (1) {
while (left--) {
code |= bitbuf & 1;
bitbuf >>= 1;
int count = *next++;
if (code - count < first) {
s->bitbuf = bitbuf;
s->bitcnt = (s->bitcnt - len) & 7;
return h->symbol[index + (code - first)];
}
index += count;
first += count;
first <<= 1;
code <<= 1;
len++;
}
left = (MAXBITS + 1) - len;
if (left == 0)
break;
if (s->incnt == s->inlen)
longjmp(s->env, 1);
bitbuf = s->in[s->incnt++];
if (left > 8)
left = 8;
}
return -10;
}
static int puff_construct(struct puff_huffman* h, const short* length, int n)
{
int len;
for (len = 0; len <= MAXBITS; len++)
h->count[len] = 0;
int symbol;
for (symbol = 0; symbol < n; symbol++)
(h->count[length[symbol]])++;
if (h->count[0] == n)
return 0;
int left = 1;
for (len = 1; len <= MAXBITS; len++) {
left <<= 1;
left -= h->count[len];
if (left < 0)
return left;
}
short offs[MAXBITS + 1];
offs[1] = 0;
for (len = 1; len < MAXBITS; len++)
offs[len + 1] = offs[len] + h->count[len];
for (symbol = 0; symbol < n; symbol++)
if (length[symbol] != 0)
h->symbol[offs[length[symbol]]++] = symbol;
return left;
}
static int puff_codes(struct puff_state* s,
const struct puff_huffman* lencode,
const struct puff_huffman* distcode)
{
static const short lens[29] = {
3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
static const short lext[29] = {
0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0};
static const short dists[30] = {
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
8193, 12289, 16385, 24577};
static const short dext[30] = {
0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
12, 12, 13, 13};
int symbol;
do {
symbol = puff_decode(s, lencode);
if (symbol < 0)
return symbol;
if (symbol < 256) {
if (s->outcnt == s->outlen)
return 1;
if (symbol)
s->out[s->outcnt] = symbol;
s->outcnt++;
} else if (symbol > 256) {
symbol -= 257;
if (symbol >= 29)
return -10;
int len = lens[symbol] + puff_bits(s, lext[symbol]);
symbol = puff_decode(s, distcode);
if (symbol < 0)
return symbol;
unsigned dist = dists[symbol] + puff_bits(s, dext[symbol]);
if (dist > s->outcnt)
return -11;
if (s->outcnt + len > s->outlen)
return 1;
while (len--) {
if (dist <= s->outcnt && s->out[s->outcnt - dist])
s->out[s->outcnt] = s->out[s->outcnt - dist];
s->outcnt++;
}
}
} while (symbol != 256);
return 0;
}
static int puff_fixed(struct puff_state* s)
{
static int virgin = 1;
static short lencnt[MAXBITS + 1], lensym[FIXLCODES];
static short distcnt[MAXBITS + 1], distsym[MAXDCODES];
static struct puff_huffman lencode, distcode;
if (virgin) {
lencode.count = lencnt;
lencode.symbol = lensym;
distcode.count = distcnt;
distcode.symbol = distsym;
short lengths[FIXLCODES];
int symbol;
for (symbol = 0; symbol < 144; symbol++)
lengths[symbol] = 8;
for (; symbol < 256; symbol++)
lengths[symbol] = 9;
for (; symbol < 280; symbol++)
lengths[symbol] = 7;
for (; symbol < FIXLCODES; symbol++)
lengths[symbol] = 8;
puff_construct(&lencode, lengths, FIXLCODES);
for (symbol = 0; symbol < MAXDCODES; symbol++)
lengths[symbol] = 5;
puff_construct(&distcode, lengths, MAXDCODES);
virgin = 0;
}
return puff_codes(s, &lencode, &distcode);
}
static int puff_dynamic(struct puff_state* s)
{
static const short order[19] =
{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
int nlen = puff_bits(s, 5) + 257;
int ndist = puff_bits(s, 5) + 1;
int ncode = puff_bits(s, 4) + 4;
if (nlen > MAXLCODES || ndist > MAXDCODES)
return -3;
short lengths[MAXCODES];
int index;
for (index = 0; index < ncode; index++)
lengths[order[index]] = puff_bits(s, 3);
for (; index < 19; index++)
lengths[order[index]] = 0;
short lencnt[MAXBITS + 1], lensym[MAXLCODES];
struct puff_huffman lencode = {lencnt, lensym};
int err = puff_construct(&lencode, lengths, 19);
if (err != 0)
return -4;
index = 0;
while (index < nlen + ndist) {
int symbol;
int len;
symbol = puff_decode(s, &lencode);
if (symbol < 0)
return symbol;
if (symbol < 16)
lengths[index++] = symbol;
else {
len = 0;
if (symbol == 16) {
if (index == 0)
return -5;
len = lengths[index - 1];
symbol = 3 + puff_bits(s, 2);
} else if (symbol == 17)
symbol = 3 + puff_bits(s, 3);
else
symbol = 11 + puff_bits(s, 7);
if (index + symbol > nlen + ndist)
return -6;
while (symbol--)
lengths[index++] = len;
}
}
if (lengths[256] == 0)
return -9;
err = puff_construct(&lencode, lengths, nlen);
if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
return -7;
short distcnt[MAXBITS + 1], distsym[MAXDCODES];
struct puff_huffman distcode = {distcnt, distsym};
err = puff_construct(&distcode, lengths + nlen, ndist);
if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
return -8;
return puff_codes(s, &lencode, &distcode);
}
static int puff(
unsigned char* dest,
unsigned long* destlen,
const unsigned char* source,
unsigned long sourcelen)
{
struct puff_state s = {
.out = dest,
.outlen = *destlen,
.outcnt = 0,
.in = source,
.inlen = sourcelen,
.incnt = 0,
.bitbuf = 0,
.bitcnt = 0,
};
int err;
if (setjmp(s.env) != 0)
err = 2;
else {
int last;
do {
last = puff_bits(&s, 1);
int type = puff_bits(&s, 2);
err = type == 0 ? puff_stored(&s) : (type == 1 ? puff_fixed(&s) : (type == 2 ? puff_dynamic(&s) : -1));
if (err != 0)
break;
} while (!last);
}
*destlen = s.outcnt;
return err;
}
//% END CODE DERIVED FROM puff.{c,h}
#define ZLIB_HEADER_WIDTH 2
static int puff_zlib_to_file(const unsigned char* source, unsigned long sourcelen, int dest_fd)
{
if (sourcelen < ZLIB_HEADER_WIDTH)
return 0;
source += ZLIB_HEADER_WIDTH;
sourcelen -= ZLIB_HEADER_WIDTH;
const unsigned long max_destlen = 132 << 20;
void* ret = mmap(0, max_destlen, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_ANON, -1, 0);
if (ret == MAP_FAILED)
return -1;
unsigned char* dest = (unsigned char*)ret;
unsigned long destlen = max_destlen;
int err = puff(dest, &destlen, source, sourcelen);
if (err) {
munmap(dest, max_destlen);
errno = -err;
return -1;
}
if (write(dest_fd, dest, destlen) != (ssize_t)destlen) {
munmap(dest, max_destlen);
return -1;
}
return munmap(dest, max_destlen);
}
static int setup_loop_device(unsigned char* data, unsigned long size, const char* loopname, int* loopfd_p)
{
int err = 0, loopfd = -1;
int memfd = syscall(__NR_memfd_create, "syzkaller", 0);
if (memfd == -1) {
err = errno;
goto error;
}
if (puff_zlib_to_file(data, size, memfd)) {
err = errno;
goto error_close_memfd;
}
loopfd = open(loopname, O_RDWR);
if (loopfd == -1) {
err = errno;
goto error_close_memfd;
}
if (ioctl(loopfd, LOOP_SET_FD, memfd)) {
if (errno != EBUSY) {
err = errno;
goto error_close_loop;
}
ioctl(loopfd, LOOP_CLR_FD, 0);
usleep(1000);
if (ioctl(loopfd, LOOP_SET_FD, memfd)) {
err = errno;
goto error_close_loop;
}
}
close(memfd);
*loopfd_p = loopfd;
return 0;
error_close_loop:
close(loopfd);
error_close_memfd:
close(memfd);
error:
errno = err;
return -1;
}
static void reset_loop_device(const char* loopname)
{
int loopfd = open(loopname, O_RDWR);
if (loopfd == -1) {
return;
}
if (ioctl(loopfd, LOOP_CLR_FD, 0)) {
}
close(loopfd);
}
static long syz_mount_image(
volatile long fsarg,
volatile long dir,
volatile long flags,
volatile long optsarg,
volatile long change_dir,
volatile unsigned long size,
volatile long image)
{
unsigned char* data = (unsigned char*)image;
int res = -1, err = 0, need_loop_device = !!size;
char* mount_opts = (char*)optsarg;
char* target = (char*)dir;
char* fs = (char*)fsarg;
char* source = NULL;
char loopname[64];
if (need_loop_device) {
int loopfd;
memset(loopname, 0, sizeof(loopname));
snprintf(loopname, sizeof(loopname), "/dev/loop%llu", procid);
if (setup_loop_device(data, size, loopname, &loopfd) == -1)
return -1;
close(loopfd);
source = loopname;
}
mkdir(target, 0777);
char opts[256];
memset(opts, 0, sizeof(opts));
if (strlen(mount_opts) > (sizeof(opts) - 32)) {
}
strncpy(opts, mount_opts, sizeof(opts) - 32);
if (strcmp(fs, "iso9660") == 0) {
flags |= MS_RDONLY;
} else if (strncmp(fs, "ext", 3) == 0) {
bool has_remount_ro = false;
char* remount_ro_start = strstr(opts, "errors=remount-ro");
if (remount_ro_start != NULL) {
char after = *(remount_ro_start + strlen("errors=remount-ro"));
char before = remount_ro_start == opts ? '\0' : *(remount_ro_start - 1);
has_remount_ro = ((before == '\0' || before == ',') && (after == '\0' || after == ','));
}
if (strstr(opts, "errors=panic") || !has_remount_ro)
strcat(opts, ",errors=continue");
} else if (strcmp(fs, "xfs") == 0) {
strcat(opts, ",nouuid");
} else if (strncmp(fs, "gfs2", 4) == 0 && (strstr(opts, "errors=panic") || strstr(opts, "debug"))) {
strcat(opts, ",errors=withdraw");
}
res = mount(source, target, fs, flags, opts);
if (res == -1) {
err = errno;
goto error_clear_loop;
}
res = open(target, O_RDONLY | O_DIRECTORY);
if (res == -1) {
err = errno;
goto error_clear_loop;
}
if (change_dir) {
res = chdir(target);
if (res == -1) {
err = errno;
}
}
error_clear_loop:
if (need_loop_device)
reset_loop_device(loopname);
errno = err;
return res;
}
int main(void)
{
syscall(__NR_mmap, /*addr=*/0x1ffffffff000ul, /*len=*/0x1000, /*prot=*/0ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
syscall(__NR_mmap, /*addr=*/0x200000000000ul, /*len=*/0x1000000, /*prot=PROT_WRITE|PROT_READ|PROT_EXEC*/7ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
syscall(__NR_mmap, /*addr=*/0x200001000000ul, /*len=*/0x1000, /*prot=*/0ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
const char* reason;
(void)reason;
if (write(1, "executing program\n", sizeof("executing program\n") - 1)) {}
// syz_mount_image$befs arguments: [
// fs: ptr[in, buffer] {
// buffer: {62 65 66 73 00} (length 0x5)
// }
// dir: ptr[in, buffer] {
// buffer: {2e 2f 66 69 6c 65 30 00} (length 0x8)
// }
// flags: mount_flags = 0x800001 (8 bytes)
// opts: ptr[inout, array[ANYUNION]] {
// array[ANYUNION] {
// }
// }
// chdir: int8 = 0x0 (1 bytes)
// size: len = 0x9e17 (8 bytes)
// img: ptr[in, buffer] {
// buffer: (compressed buffer with length 0x9e18)
// }
// ]
// returns fd_dir
memcpy((void*)0x200000000040, "befs\000", 5);
memcpy((void*)0x200000000000, "./file0\000", 8);
memcpy((void*)0x2000000000c0, "... [truncated large byte array] ...", 40472);
syz_mount_image(/*fs=*/0x200000000040, /*dir=*/0x200000000000, /*flags=MS_I_VERSION|MS_RDONLY*/0x800001, /*opts=*/0x200000000080, /*chdir=*/0, /*size=*/0x9e17, /*img=*/0x2000000000c0);
return 0;
}
]
|
| 3/1 |
2026/08/26 17:23 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d]
|
| 4/1 |
2026/08/26 17:23 |
action |
kernel-builder |
13m
Results: map[KernelObj:/app/workdir/cache/build/d5a24f7540d15993af050a7e70e523f40d96fc80]
|
| 5/1 |
2026/08/26 17:36 |
action |
crash-reproducer |
1m
Results: map[OtherCrashReports:<nil> ReproducedBugTitle:UBSAN: shift-out-of-bounds in befs_check_sb ReproducedCrashReport:loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
ReproducedFaultInjection:]
|
| 6/1 |
2026/08/26 17:38 |
action |
codesearch-prepare |
9m
Results: map[Index:codesearch-index]
|
| 7/1 |
2026/08/26 17:47 |
agent |
debugger |
7m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with debugging a kernel crash root cause.
You need to provide a detailed explanation of the root cause for another developer to be
able to write a fix for the bug based on your explanation. Include all relevant details
into the response: function/struct/field/etc names, code snippets, line numbers,
macro/enum values, etc.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash is:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The following C code is a draft of the vulnerable syscall sequence. Keep in mind that
it may lack the precise threading, sandboxing, and some arguments of a working reproducer:
// autogenerated by syzkaller (https://github.com/google/syzkaller)
#define _GNU_SOURCE
#include <endian.h>
#include <errno.h>
#include <fcntl.h>
#include <setjmp.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
#include <linux/loop.h>
#ifndef __NR_memfd_create
#define __NR_memfd_create 319
#endif
static unsigned long long procid;
//% This code is derived from puff.{c,h}, found in the zlib development. The
//% original files come with the following copyright notice:
//% Copyright (C) 2002-2013 Mark Adler, all rights reserved
//% version 2.3, 21 Jan 2013
//% This software is provided 'as-is', without any express or implied
//% warranty. In no event will the author be held liable for any damages
//% arising from the use of this software.
//% Permission is granted to anyone to use this software for any purpose,
//% including commercial applications, and to alter it and redistribute it
//% freely, subject to the following restrictions:
//% 1. The origin of this software must not be misrepresented; you must not
//% claim that you wrote the original software. If you use this software
//% in a product, an acknowledgment in the product documentation would be
//% appreciated but is not required.
//% 2. Altered source versions must be plainly marked as such, and must not be
//% misrepresented as being the original software.
//% 3. This notice may not be removed or altered from any source distribution.
//% Mark Adler madler@alumni.caltech.edu
//% BEGIN CODE DERIVED FROM puff.{c,h}
#define MAXBITS 15
#define MAXLCODES 286
#define MAXDCODES 30
#define MAXCODES (MAXLCODES + MAXDCODES)
#define FIXLCODES 288
struct puff_state {
unsigned char* out;
unsigned long outlen;
unsigned long outcnt;
const unsigned char* in;
unsigned long inlen;
unsigned long incnt;
int bitbuf;
int bitcnt;
jmp_buf env;
};
static int puff_bits(struct puff_state* s, int need)
{
long val = s->bitbuf;
while (s->bitcnt < need) {
if (s->incnt == s->inlen)
longjmp(s->env, 1);
val |= (long)(s->in[s->incnt++]) << s->bitcnt;
s->bitcnt += 8;
}
s->bitbuf = (int)(val >> need);
s->bitcnt -= need;
return (int)(val & ((1L << need) - 1));
}
static int puff_stored(struct puff_state* s)
{
s->bitbuf = 0;
s->bitcnt = 0;
if (s->incnt + 4 > s->inlen)
return 2;
unsigned len = s->in[s->incnt++];
len |= s->in[s->incnt++] << 8;
if (s->in[s->incnt++] != (~len & 0xff) ||
s->in[s->incnt++] != ((~len >> 8) & 0xff))
return -2;
if (s->incnt + len > s->inlen)
return 2;
if (s->outcnt + len > s->outlen)
return 1;
for (; len--; s->outcnt++, s->incnt++) {
if (s->in[s->incnt])
s->out[s->outcnt] = s->in[s->incnt];
}
return 0;
}
struct puff_huffman {
short* count;
short* symbol;
};
static int puff_decode(struct puff_state* s, const struct puff_huffman* h)
{
int first = 0;
int index = 0;
int bitbuf = s->bitbuf;
int left = s->bitcnt;
int code = first = index = 0;
int len = 1;
short* next = h->count + 1;
while (1) {
while (left--) {
code |= bitbuf & 1;
bitbuf >>= 1;
int count = *next++;
if (code - count < first) {
s->bitbuf = bitbuf;
s->bitcnt = (s->bitcnt - len) & 7;
return h->symbol[index + (code - first)];
}
index += count;
first += count;
first <<= 1;
code <<= 1;
len++;
}
left = (MAXBITS + 1) - len;
if (left == 0)
break;
if (s->incnt == s->inlen)
longjmp(s->env, 1);
bitbuf = s->in[s->incnt++];
if (left > 8)
left = 8;
}
return -10;
}
static int puff_construct(struct puff_huffman* h, const short* length, int n)
{
int len;
for (len = 0; len <= MAXBITS; len++)
h->count[len] = 0;
int symbol;
for (symbol = 0; symbol < n; symbol++)
(h->count[length[symbol]])++;
if (h->count[0] == n)
return 0;
int left = 1;
for (len = 1; len <= MAXBITS; len++) {
left <<= 1;
left -= h->count[len];
if (left < 0)
return left;
}
short offs[MAXBITS + 1];
offs[1] = 0;
for (len = 1; len < MAXBITS; len++)
offs[len + 1] = offs[len] + h->count[len];
for (symbol = 0; symbol < n; symbol++)
if (length[symbol] != 0)
h->symbol[offs[length[symbol]]++] = symbol;
return left;
}
static int puff_codes(struct puff_state* s,
const struct puff_huffman* lencode,
const struct puff_huffman* distcode)
{
static const short lens[29] = {
3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
static const short lext[29] = {
0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0};
static const short dists[30] = {
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
8193, 12289, 16385, 24577};
static const short dext[30] = {
0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
12, 12, 13, 13};
int symbol;
do {
symbol = puff_decode(s, lencode);
if (symbol < 0)
return symbol;
if (symbol < 256) {
if (s->outcnt == s->outlen)
return 1;
if (symbol)
s->out[s->outcnt] = symbol;
s->outcnt++;
} else if (symbol > 256) {
symbol -= 257;
if (symbol >= 29)
return -10;
int len = lens[symbol] + puff_bits(s, lext[symbol]);
symbol = puff_decode(s, distcode);
if (symbol < 0)
return symbol;
unsigned dist = dists[symbol] + puff_bits(s, dext[symbol]);
if (dist > s->outcnt)
return -11;
if (s->outcnt + len > s->outlen)
return 1;
while (len--) {
if (dist <= s->outcnt && s->out[s->outcnt - dist])
s->out[s->outcnt] = s->out[s->outcnt - dist];
s->outcnt++;
}
}
} while (symbol != 256);
return 0;
}
static int puff_fixed(struct puff_state* s)
{
static int virgin = 1;
static short lencnt[MAXBITS + 1], lensym[FIXLCODES];
static short distcnt[MAXBITS + 1], distsym[MAXDCODES];
static struct puff_huffman lencode, distcode;
if (virgin) {
lencode.count = lencnt;
lencode.symbol = lensym;
distcode.count = distcnt;
distcode.symbol = distsym;
short lengths[FIXLCODES];
int symbol;
for (symbol = 0; symbol < 144; symbol++)
lengths[symbol] = 8;
for (; symbol < 256; symbol++)
lengths[symbol] = 9;
for (; symbol < 280; symbol++)
lengths[symbol] = 7;
for (; symbol < FIXLCODES; symbol++)
lengths[symbol] = 8;
puff_construct(&lencode, lengths, FIXLCODES);
for (symbol = 0; symbol < MAXDCODES; symbol++)
lengths[symbol] = 5;
puff_construct(&distcode, lengths, MAXDCODES);
virgin = 0;
}
return puff_codes(s, &lencode, &distcode);
}
static int puff_dynamic(struct puff_state* s)
{
static const short order[19] =
{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
int nlen = puff_bits(s, 5) + 257;
int ndist = puff_bits(s, 5) + 1;
int ncode = puff_bits(s, 4) + 4;
if (nlen > MAXLCODES || ndist > MAXDCODES)
return -3;
short lengths[MAXCODES];
int index;
for (index = 0; index < ncode; index++)
lengths[order[index]] = puff_bits(s, 3);
for (; index < 19; index++)
lengths[order[index]] = 0;
short lencnt[MAXBITS + 1], lensym[MAXLCODES];
struct puff_huffman lencode = {lencnt, lensym};
int err = puff_construct(&lencode, lengths, 19);
if (err != 0)
return -4;
index = 0;
while (index < nlen + ndist) {
int symbol;
int len;
symbol = puff_decode(s, &lencode);
if (symbol < 0)
return symbol;
if (symbol < 16)
lengths[index++] = symbol;
else {
len = 0;
if (symbol == 16) {
if (index == 0)
return -5;
len = lengths[index - 1];
symbol = 3 + puff_bits(s, 2);
} else if (symbol == 17)
symbol = 3 + puff_bits(s, 3);
else
symbol = 11 + puff_bits(s, 7);
if (index + symbol > nlen + ndist)
return -6;
while (symbol--)
lengths[index++] = len;
}
}
if (lengths[256] == 0)
return -9;
err = puff_construct(&lencode, lengths, nlen);
if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
return -7;
short distcnt[MAXBITS + 1], distsym[MAXDCODES];
struct puff_huffman distcode = {distcnt, distsym};
err = puff_construct(&distcode, lengths + nlen, ndist);
if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
return -8;
return puff_codes(s, &lencode, &distcode);
}
static int puff(
unsigned char* dest,
unsigned long* destlen,
const unsigned char* source,
unsigned long sourcelen)
{
struct puff_state s = {
.out = dest,
.outlen = *destlen,
.outcnt = 0,
.in = source,
.inlen = sourcelen,
.incnt = 0,
.bitbuf = 0,
.bitcnt = 0,
};
int err;
if (setjmp(s.env) != 0)
err = 2;
else {
int last;
do {
last = puff_bits(&s, 1);
int type = puff_bits(&s, 2);
err = type == 0 ? puff_stored(&s) : (type == 1 ? puff_fixed(&s) : (type == 2 ? puff_dynamic(&s) : -1));
if (err != 0)
break;
} while (!last);
}
*destlen = s.outcnt;
return err;
}
//% END CODE DERIVED FROM puff.{c,h}
#define ZLIB_HEADER_WIDTH 2
static int puff_zlib_to_file(const unsigned char* source, unsigned long sourcelen, int dest_fd)
{
if (sourcelen < ZLIB_HEADER_WIDTH)
return 0;
source += ZLIB_HEADER_WIDTH;
sourcelen -= ZLIB_HEADER_WIDTH;
const unsigned long max_destlen = 132 << 20;
void* ret = mmap(0, max_destlen, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_ANON, -1, 0);
if (ret == MAP_FAILED)
return -1;
unsigned char* dest = (unsigned char*)ret;
unsigned long destlen = max_destlen;
int err = puff(dest, &destlen, source, sourcelen);
if (err) {
munmap(dest, max_destlen);
errno = -err;
return -1;
}
if (write(dest_fd, dest, destlen) != (ssize_t)destlen) {
munmap(dest, max_destlen);
return -1;
}
return munmap(dest, max_destlen);
}
static int setup_loop_device(unsigned char* data, unsigned long size, const char* loopname, int* loopfd_p)
{
int err = 0, loopfd = -1;
int memfd = syscall(__NR_memfd_create, "syzkaller", 0);
if (memfd == -1) {
err = errno;
goto error;
}
if (puff_zlib_to_file(data, size, memfd)) {
err = errno;
goto error_close_memfd;
}
loopfd = open(loopname, O_RDWR);
if (loopfd == -1) {
err = errno;
goto error_close_memfd;
}
if (ioctl(loopfd, LOOP_SET_FD, memfd)) {
if (errno != EBUSY) {
err = errno;
goto error_close_loop;
}
ioctl(loopfd, LOOP_CLR_FD, 0);
usleep(1000);
if (ioctl(loopfd, LOOP_SET_FD, memfd)) {
err = errno;
goto error_close_loop;
}
}
close(memfd);
*loopfd_p = loopfd;
return 0;
error_close_loop:
close(loopfd);
error_close_memfd:
close(memfd);
error:
errno = err;
return -1;
}
static void reset_loop_device(const char* loopname)
{
int loopfd = open(loopname, O_RDWR);
if (loopfd == -1) {
return;
}
if (ioctl(loopfd, LOOP_CLR_FD, 0)) {
}
close(loopfd);
}
static long syz_mount_image(
volatile long fsarg,
volatile long dir,
volatile long flags,
volatile long optsarg,
volatile long change_dir,
volatile unsigned long size,
volatile long image)
{
unsigned char* data = (unsigned char*)image;
int res = -1, err = 0, need_loop_device = !!size;
char* mount_opts = (char*)optsarg;
char* target = (char*)dir;
char* fs = (char*)fsarg;
char* source = NULL;
char loopname[64];
if (need_loop_device) {
int loopfd;
memset(loopname, 0, sizeof(loopname));
snprintf(loopname, sizeof(loopname), "/dev/loop%llu", procid);
if (setup_loop_device(data, size, loopname, &loopfd) == -1)
return -1;
close(loopfd);
source = loopname;
}
mkdir(target, 0777);
char opts[256];
memset(opts, 0, sizeof(opts));
if (strlen(mount_opts) > (sizeof(opts) - 32)) {
}
strncpy(opts, mount_opts, sizeof(opts) - 32);
if (strcmp(fs, "iso9660") == 0) {
flags |= MS_RDONLY;
} else if (strncmp(fs, "ext", 3) == 0) {
bool has_remount_ro = false;
char* remount_ro_start = strstr(opts, "errors=remount-ro");
if (remount_ro_start != NULL) {
char after = *(remount_ro_start + strlen("errors=remount-ro"));
char before = remount_ro_start == opts ? '\0' : *(remount_ro_start - 1);
has_remount_ro = ((before == '\0' || before == ',') && (after == '\0' || after == ','));
}
if (strstr(opts, "errors=panic") || !has_remount_ro)
strcat(opts, ",errors=continue");
} else if (strcmp(fs, "xfs") == 0) {
strcat(opts, ",nouuid");
} else if (strncmp(fs, "gfs2", 4) == 0 && (strstr(opts, "errors=panic") || strstr(opts, "debug"))) {
strcat(opts, ",errors=withdraw");
}
res = mount(source, target, fs, flags, opts);
if (res == -1) {
err = errno;
goto error_clear_loop;
}
res = open(target, O_RDONLY | O_DIRECTORY);
if (res == -1) {
err = errno;
goto error_clear_loop;
}
if (change_dir) {
res = chdir(target);
if (res == -1) {
err = errno;
}
}
error_clear_loop:
if (need_loop_device)
reset_loop_device(loopname);
errno = err;
return res;
}
int main(void)
{
syscall(__NR_mmap, /*addr=*/0x1ffffffff000ul, /*len=*/0x1000, /*prot=*/0ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
syscall(__NR_mmap, /*addr=*/0x200000000000ul, /*len=*/0x1000000, /*prot=PROT_WRITE|PROT_READ|PROT_EXEC*/7ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
syscall(__NR_mmap, /*addr=*/0x200001000000ul, /*len=*/0x1000, /*prot=*/0ul, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32ul, /*fd=*/(intptr_t)-1, /*offset=*/0ul);
const char* reason;
(void)reason;
if (write(1, "executing program\n", sizeof("executing program\n") - 1)) {}
// syz_mount_image$befs arguments: [
// fs: ptr[in, buffer] {
// buffer: {62 65 66 73 00} (length 0x5)
// }
// dir: ptr[in, buffer] {
// buffer: {2e 2f 66 69 6c 65 30 00} (length 0x8)
// }
// flags: mount_flags = 0x800001 (8 bytes)
// opts: ptr[inout, array[ANYUNION]] {
// array[ANYUNION] {
// }
// }
// chdir: int8 = 0x0 (1 bytes)
// size: len = 0x9e17 (8 bytes)
// img: ptr[in, buffer] {
// buffer: (compressed buffer with length 0x9e18)
// }
// ]
// returns fd_dir
memcpy((void*)0x200000000040, "befs\000", 5);
memcpy((void*)0x200000000000, "./file0\000", 8);
memcpy((void*)0x2000000000c0, "... [truncated large byte array] ...", 40472);
syz_mount_image(/*fs=*/0x200000000040, /*dir=*/0x200000000000, /*flags=MS_I_VERSION|MS_RDONLY*/0x800001, /*opts=*/0x200000000080, /*chdir=*/0, /*size=*/0x9e17, /*img=*/0x2000000000c0);
return 0;
}
Reply: An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
|
| 8/2 |
2026/08/26 17:47 |
llm |
debugger |
0m
Model:
Tokens:
input: 11271
output: 35
thoughts: 158
Thoughts: **Analyzing a BEFS Filesystem Crash**
Okay, so I've got a crash report here, and it's pointing me right at `fs/befs/super.c:96:9`. The message itself is pretty clear: a shift exponent is exceeding the limits of a 32-bit integer, specifically 2066842816. That's a huge number for a shift operation, which immediately raises a red flag. The call trace helps me narrow things down. It looks like the error originates in `befs_check_sb`, which is then called by `befs_fill_super`. I'll need to jump into `fs/befs/super.c` and take a look around line 96 to see what's happening. I expect to find a bit-shift operation using a value that's either been miscalculated, improperly read from the superblock, or something similar, resulting in this out-of-bounds shift. Let's see what's going on in that function.
|
| 9/2 |
2026/08/26 17:48 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:80 LineCount:40]
Results: map[Contents: 80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 10/2 |
2026/08/26 17:48 |
llm |
debugger |
0m
Model:
Tokens:
input: 12285
output: 38
thoughts: 98
Thoughts: **Debugging a Superblock Implausibility**
Okay, so I've hit a snag. The kernel's bombing out on line 96, specifically this line of C code: `if ((1 << befs_sb->block_shift) != befs_sb->block_size)`. Looks like a fundamental issue with block size calculations in this BEFS filesystem implementation.
The error message points to `befs_sb->block_shift` having a value of `2066842816`. That's... unusual. It's read directly from the superblock, which is the root of the filesystem metadata. This `block_shift` is being used as a bit-shift exponent. I can immediately see the potential problem: `2066842816` is not a reasonable value for a bit-shift exponent, especially considering the constraints of modern hardware. This kind of value would suggest some kind of corruption in the superblock data, or a potential logic error in how it is interpreted.
My next step is to examine the definitions of `befs_sb` (the superblock structure) and `block_shift`. I need to understand what this field is *supposed* to represent, how it's defined, and how it is supposed to relate to `block_size`. I need to trace back from this variable and identify where this value came from. Is this a signed/unsigned int issue? I will check the data types and sizes involved. A likely scenario is the corruption of a signed vs unsigned integer, that is being read into `block_shift`.
|
| 11/2 |
2026/08/26 17:48 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/befs/super.c Name:befs_sb_info]
Results: map[SourceCode: 32: struct befs_sb_info {
33: u32 magic1;
34: u32 block_size;
35: u32 block_shift;
36: int byte_order;
37: befs_off_t num_blocks;
38: befs_off_t used_blocks;
39: u32 inode_size;
40: u32 magic2;
41:
42: /* Allocation group information */
43: u32 blocks_per_ag;
44: u32 ag_shift;
45: u32 num_ags;
46:
47: /* State of the superblock */
48: u32 flags;
49:
50: /* Journal log entry */
51: befs_block_run log_blocks;
52: befs_off_t log_start;
53: befs_off_t log_end;
54:
55: befs_inode_addr root_dir;
56: befs_inode_addr indices;
57: u32 magic3;
58:
59: struct befs_mount_options mount_opts;
60: struct nls_table *nls;
61: };
SourceFile:fs/befs/befs.h]
|
| 12/2 |
2026/08/26 17:48 |
llm |
debugger |
0m
Model:
Tokens:
input: 13157
output: 35
thoughts: 409
Thoughts: **Analyzing a Potential Integer Overflow Vulnerability in BEFS Code**
Okay, so I'm looking at this BEFS code, and the first thing that jumps out at me is this: `befs_sb->block_shift` is a `u32`. The code does `(1 << befs_sb->block_shift)`. And immediately, my alarms go off. Since `1` is an `int`, a 32-bit signed integer, shifting it by a value greater than or equal to 31 is, well, undefined behavior, right? Or maybe 32, depending on the standard, but either way, we're outside of bounds here.
Hold on, let me check that value again. Holy smokes, the shift exponent is `2066842816`, or `0x7B3134C0`. That's *way* larger than 31. This is a clear problem.
The fix, obviously, is to validate `befs_sb->block_shift`. We need to check if it's within the valid bounds *before* we do the shift, or just make sure it's less than 32.
Wait, though... let me see... okay, hang on, it *does* look like `befs_sb->block_size` is checked earlier in the code:
```c
if (befs_sb->block_size != 1024 && befs_sb->block_size != 2048 &&
befs_sb->block_size != 4096 && befs_sb->block_size != 8192) {
befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
return BEFS_ERR;
}
```
Okay, so if `befs_sb->block_size` is validated to be either 1024, 2048, 4096, or 8192, then logically, `befs_sb->block_shift` *should* be 10, 11, 12, or 13, respectively. So that part *should* be safe.
But, and this is the critical point, `befs_sb->block_shift` isn't actually being checked *before* the shift operation. That's the vulnerability! Even with that initial check, the shift could still happen on an out-of-bounds value.
Let me take a quick look around line 80 in `fs/befs/super.c` to see if there's anything else relevant...
|
| 13/2 |
2026/08/26 17:48 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:60 LineCount:40]
Results: map[Contents: 60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
61:
62: /* Check magic headers of super block */
63: if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
64: || (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
65: || (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
66: befs_error(sb, "invalid magic header");
67: return BEFS_ERR;
68: }
69:
70: /*
71: * Check blocksize of BEFS.
72: *
73: * Blocksize of BEFS is 1024, 2048, 4096 or 8192.
74: */
75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
]
|
| 14/2 |
2026/08/26 17:48 |
llm |
debugger |
0m
Model:
Tokens:
input: 14829
output: 36
thoughts: 178
Thoughts: **My Initial Assessment of the Code**
Okay, so I'm looking at this bit of code and immediately see a potential issue with `befs_sb->block_shift`. It's not being validated to ensure it's less than 32 before being used in that left shift operation: `(1 << befs_sb->block_shift)`. That immediately screams "undefined behavior" to me. Hold on, `1` is an integer, isn't it? So, shifting it by a massive value like `block_shift` which seems to be `2066842816`? That's definitely undefined, no question about it. This could lead to all sorts of nasty side effects if it's triggered.
Then I see `ag_shift` used in the same fashion, and I'm thinking, "Wait a minute, is that the same problem again?"
```c
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Bingo. This is an identical shift-out-of-bounds issue if `ag_shift` is large as well. The lack of validation on both shifts is a glaring flaw. I need to dig into the `befs_check_sb` function to understand how these values are supposed to be set and validated, or rather, *not* validated. Time to check the superblock checking function.
|
| 15/2 |
2026/08/26 17:48 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:100 LineCount:40]
Results: map[Contents: 100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 16/2 |
2026/08/26 17:48 |
llm |
debugger |
0m
Model:
Tokens:
input: 15680
output: 30
thoughts: 292
Thoughts: **Addressing Potential Shift Vulnerabilities**
Okay, so I'm looking at these shift values, `befs_sb->block_shift` and `befs_sb->ag_shift`, which come directly from the superblock. The problem is they could be huge, leading to potential issues. My initial thought was to simply check if `befs_sb->block_shift` was less than 32 before shifting. But then, it hit me: `ilog2` is the elegant solution here. I can just compare `befs_sb->block_shift` to `ilog2(befs_sb->block_size)`.
Considering `block_size` has already been validated to be one of 1024, 2048, 4096, or 8192, `ilog2(befs_sb->block_size)` is well-defined and will result in values of 10, 11, 12, or 13, all perfectly reasonable.
```c
if (befs_sb->block_shift != ilog2(befs_sb->block_size)) {
```
For the `ag_shift`, it's a similar principle: I'll compare `befs_sb->ag_shift` with `ilog2(befs_sb->blocks_per_ag)`.
```c
if (befs_sb->ag_shift != ilog2(befs_sb->blocks_per_ag))
```
But wait... a critical question arises: Is `blocks_per_ag` guaranteed to be a power of 2? I need to verify that. I'm going to have to check if `blocks_per_ag` is a power of 2.
|
| 17/2 |
2026/08/26 17:48 |
tool |
grepper |
0m
Args: map[Expression:blocks_per_ag PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-42- /* Allocation group information */
fs/befs/befs.h:43: u32 blocks_per_ag;
fs/befs/befs.h-44- u32 ag_shift;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-126- fs32 magic2;
fs/befs/befs_fs_types.h:127: fs32 blocks_per_ag;
fs/befs/befs_fs_types.h-128- fs32 ag_shift;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-176- befs_debug(sb, " magic2 %08x", fs32_to_cpu(sb, sup->magic2));
fs/befs/debug.c:177: befs_debug(sb, " blocks_per_ag %u",
fs/befs/debug.c:178: fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c-179- befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-39-
fs/befs/super.c:40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c-41- befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 18/2 |
2026/08/26 17:48 |
llm |
debugger |
0m
Model:
Tokens:
input: 17145
output: 57
thoughts: 636
Thoughts: **Analyzing Power-of-Two Calculations and Potential Overflow**
Okay, so I'm looking at this condition: `(1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag`. That immediately triggers some concerns. It looks like the intention is that `blocks_per_ag` should be equal to `1 << ag_shift`, essentially a power of 2 determined by `ag_shift`.
My initial thought is that if `ag_shift` is large, say 32 or greater, then `1 << ag_shift` results in undefined behavior. We could sidestep this by checking if `shift` is greater than or equal to the size of an integer in bits, or by using an unsigned long long with `1ULL << shift`.
But wait, even if we use `1ULL`, if `ag_shift` is 32, the result would be `4294967296`, which wouldn't fit in a `u32` for `blocks_per_ag`. So, `ag_shift` must be less than 32.
Then, there's the `1 << befs_sb->block_shift`. This uses a signed 32-bit integer, which can lead to similar problems. If `block_shift` is 31, then `1 << 31` is `-2147483648`, which is undefined behavior. Thus, `block_shift` must be less than 31. This would be fine if we used `1U`.
Actually, the code checks the `block_size` to be 1024, 2048, 4096, or 8192. So that means that `block_shift` must be 10, 11, 12, or 13.
It looks like the simplest approach might be to just use `ilog2(befs_sb->block_size) != befs_sb->block_shift`.
Now, for `ag_shift`, how about `befs_sb->ag_shift != ilog2(befs_sb->blocks_per_ag)`? But hold on, what if `blocks_per_ag` isn't a power of 2? In that case, `1 << ag_shift` will *never* equal `blocks_per_ag`. But then again, `1 << ag_shift` is always a power of 2. So if they are equal, `blocks_per_ag` MUST be a power of 2.
Wait, if `blocks_per_ag` is zero, `1 << ag_shift` will never be zero.
So, checking `befs_sb->ag_shift >= sizeof(u32) * 8` or `befs_sb->ag_shift >= 32` seems like it covers some of the cases. However, we've established that `1 << 31` can be undefined behavior with signed integers.
Let's look at how other files handle these calculations or just stick with `1U << ag_shift` and check `ag_shift < 32`. That should handle the power of two calculations safely.
|
| 19/2 |
2026/08/26 17:49 |
tool |
codeexpert |
1m
Args: map[Question:How to safely check if `(1 << shift) == value` when `shift` and `value` are both `u32` read from disk, to avoid shift-out-of-bounds?]
Results: map[Answer:To safely check if `(1 << shift) == value` when `shift` and `value` are both untrusted `u32` integers read from disk, use:
```c
shift < 32 && (1U << shift) == value
```
*(or using the kernel macro: `shift < 32 && BIT(shift) == value`)*
---
### Why the Original Code `(1 << shift) == value` is Unsafe
1. **Undefined Behavior (Shift Out-of-Bounds):**
In C (C99 §6.5.7), shifting by an amount greater than or equal to the width of the left operand is undefined behavior (UB). If `shift >= 32`, UBSan (`CONFIG_UBSAN`) will trigger a `shift-out-of-bounds` warning/kernel panic (e.g., `UBSAN: shift exponent ... is too large for 32-bit type`).
2. **CPU Architecture Masking Quirks:**
On architectures like x86, shift instructions (e.g. `shl`) mask the shift count using the lower 5 bits (`shift & 31`). As a result, `1 << 32` behaves as `1 << 0 == 1`. If `shift == 32` and `value == 1`, the expression would incorrectly evaluate to `true` even though $2^{32} \ne 1$.
3. **Signed Integer Overflow:**
The integer constant `1` has type `int` (signed 32-bit). If `shift == 31`, `1 << 31` shifts into the sign bit, which causes signed integer overflow (UB in C99/C11).
---
### Key Components of the Safe Fix
1. **Unsigned Shift Guard (`shift < 32`):**
Because `shift` is `u32` (unsigned), `shift < 32` ensures $0 \le \text{shift} \le 31$.
2. **Short-Circuit Evaluation (`&&`):**
C guarantees short-circuiting: if `shift >= 32`, the right-hand shift operation `(1U << shift)` is never executed.
3. **Unsigned Literal (`1U` / `BIT()`):**
Using `1U` (or `BIT(shift)`) prevents signed overflow at `shift == 31`.
4. **Mathematical Correctness:**
Since `value` is a 32-bit unsigned integer (maximum $2^{32}-1$), $2^{\text{shift}}$ can never equal `value` when $\text{shift} \ge 32$. Hence, returning `false` for `shift >= 32` is always correct.
---
### Alternative Safe Approaches
#### 1. Checking Power of Two and Using `ilog2()` (Avoids Shifting)
If you prefer not to perform shifts, you can check `value` using Linux kernel helpers:
```c
is_power_of_2(value) && ilog2(value) == shift
```
*(Note: `is_power_of_2()` ensures `value != 0` before calling `ilog2()`)*.
#### 2. Domain-Specific Superblock Validation
When parsing disk formats (e.g. filesystem block/cluster size bits), validate against the valid supported range (such as minimum 512 bytes / $2^9$ and maximum page size or 64 KiB / $2^{16}$):
```c
if (shift < 9 || shift > 16)
return -EINVAL;
if ((1U << shift) != value)
return -EINVAL;
```]
|
| 20/3 |
2026/08/26 17:49 |
agent |
codeexpert |
1m
Model:
Results: map[Answer:To safely check if `(1 << shift) == value` when `shift` and `value` are both untrusted `u32` integers read from disk, use:
```c
shift < 32 && (1U << shift) == value
```
*(or using the kernel macro: `shift < 32 && BIT(shift) == value`)*
---
### Why the Original Code `(1 << shift) == value` is Unsafe
1. **Undefined Behavior (Shift Out-of-Bounds):**
In C (C99 §6.5.7), shifting by an amount greater than or equal to the width of the left operand is undefined behavior (UB). If `shift >= 32`, UBSan (`CONFIG_UBSAN`) will trigger a `shift-out-of-bounds` warning/kernel panic (e.g., `UBSAN: shift exponent ... is too large for 32-bit type`).
2. **CPU Architecture Masking Quirks:**
On architectures like x86, shift instructions (e.g. `shl`) mask the shift count using the lower 5 bits (`shift & 31`). As a result, `1 << 32` behaves as `1 << 0 == 1`. If `shift == 32` and `value == 1`, the expression would incorrectly evaluate to `true` even though $2^{32} \ne 1$.
3. **Signed Integer Overflow:**
The integer constant `1` has type `int` (signed 32-bit). If `shift == 31`, `1 << 31` shifts into the sign bit, which causes signed integer overflow (UB in C99/C11).
---
### Key Components of the Safe Fix
1. **Unsigned Shift Guard (`shift < 32`):**
Because `shift` is `u32` (unsigned), `shift < 32` ensures $0 \le \text{shift} \le 31$.
2. **Short-Circuit Evaluation (`&&`):**
C guarantees short-circuiting: if `shift >= 32`, the right-hand shift operation `(1U << shift)` is never executed.
3. **Unsigned Literal (`1U` / `BIT()`):**
Using `1U` (or `BIT(shift)`) prevents signed overflow at `shift == 31`.
4. **Mathematical Correctness:**
Since `value` is a 32-bit unsigned integer (maximum $2^{32}-1$), $2^{\text{shift}}$ can never equal `value` when $\text{shift} \ge 32$. Hence, returning `false` for `shift >= 32` is always correct.
---
### Alternative Safe Approaches
#### 1. Checking Power of Two and Using `ilog2()` (Avoids Shifting)
If you prefer not to perform shifts, you can check `value` using Linux kernel helpers:
```c
is_power_of_2(value) && ilog2(value) == shift
```
*(Note: `is_power_of_2()` ensures `value != 0` before calling `ilog2()`)*.
#### 2. Domain-Specific Superblock Validation
When parsing disk formats (e.g. filesystem block/cluster size bits), validate against the valid supported range (such as minimum 512 bytes / $2^9$ and maximum page size or 64 KiB / $2^{16}$):
```c
if (shift < 9 || shift > 16)
return -EINVAL;
if ((1U << shift) != value)
return -EINVAL;
```]
Instruction:
You are a capable Linux kernel developer tasked with researching complex questions
about kernel source code. You will be given a concrete question, and need to provide
a concrete answer.
Use tools extensively while researching the question. Don't make assumptions,
or rely on your previous knowledge about the kernel source code, use available tools
to access the actual source code.
Use all available sources of information:
- kernel source code
- documentation in the Documentation dir in the source tree
- git commits descriptions, git blame
Do not guess file names or file paths and attempt to read them without
verifying their existence first using content search or directory listing tools.
If a file, symbol, or directory is not found via content search (grepper) or
directory listing (codesearch-dir-index), treat it as completely absent.
Do not attempt to guess alternative names, extensions, or directories.
Tool Selection Guidelines:
1. For C functions, structs, and variables: Prefer codesearch-definition-source
or codesearch-struct-layout FIRST to retrieve clean, exact definitions
without line-number guessing.
2. If symbol lookup fails (e.g., preprocessor macros, macro-generated code, or
disabled #ifdef branches), fall back to read-file or grepper.
3. For file headers, #include directives, preprocessor macro definitions, and
non-C files (Kconfig, Makefiles, docs): Use read-file or grepper directly.
Do NOT use git-log to search for the presence or existence of files in the
repository. git-log is only for tracing commit history of files that are
already present in the current checkout. If a file does not exist in the
current checkout, it cannot be used for reproduction.
Avoid running broad git-log queries (such as searches on the entire repo)
without a specific 'PathPrefix' to restrict the scope, as these are very
expensive and will time out.
If a git-log tool call times out, do not retry the query with the same broad
scope. You must specify a tighter, narrower 'PathPrefix' for subsequent queries.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: How to safely check if `(1 << shift) == value` when `shift` and `value` are both `u32` read from disk, to avoid shift-out-of-bounds?
|
| 21/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 4000
output: 20
thoughts: 191
Thoughts: **My Approach to a Potentially Risky Bitwise Operation**
Okay, so the user's got a situation. They're trying to figure out how to safely check if `(1 << shift) == value`, but both `shift` and `value` are `u32` and coming from potentially untrusted disk reads. My first thought is: shift-out-of-bounds is the obvious danger here, and we *absolutely* need to handle it correctly. No undefined behavior, no surprises.
Let's not reinvent the wheel. I'm going to start by thinking about how the Linux kernel handles these kinds of situations. What are the common idioms? Are there existing macros, helper functions, or well-established patterns for this very problem? I'm hoping I can find a solid, battle-tested solution already implemented. It's almost certain there are such functions.
So, the next step is to dive into the kernel codebase. I'll need to do some focused grepping. I'll be looking for patterns like `(1 << shift) == value`, `1U << shift`, or similar constructions where `shift` is potentially large or untrusted. I'm thinking I should start by looking in filesystem code (ext4, btrfs, f2fs, xfs… those are always dealing with potentially problematic data), and general kernel bit manipulation or math header files. Finding existing solutions will save me time and provide a solid reference implementation. This seems like it should be a pretty common pattern to encounter, and I bet it's been handled thoroughly.
|
| 22/4 |
2026/08/26 17:49 |
tool |
grepper |
0m
Args: map[Expression:shift.*<.*32]
Results: map[Output:arch/arm/nwfpe/softfloat.c=2569=int32 floatx80_to_int32_round_to_zero( floatx80 a )
--
arch/arm/nwfpe/softfloat.c-2579- shiftCount = 0x403E - aExp;
arch/arm/nwfpe/softfloat.c:2580: if ( shiftCount < 32 ) {
arch/arm/nwfpe/softfloat.c-2581- if ( ( aExp == 0x7FFF ) && (bits64) ( aSig<<1 ) ) aSign = 0;
--
arch/arm/vfp/vfp.h=9=static inline u32 vfp_shiftright32jamming(u32 val, unsigned int shift)
--
arch/arm/vfp/vfp.h-11- if (shift) {
arch/arm/vfp/vfp.h:12: if (shift < 32)
arch/arm/vfp/vfp.h:13: val = val >> shift | ((val << (32 - shift)) != 0);
arch/arm/vfp/vfp.h-14- else
--
arch/arm/vfp/vfpsingle.c=72=u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions, const char *func)
--
arch/arm/vfp/vfpsingle.c-102- shift = 32 - fls(significand);
arch/arm/vfp/vfpsingle.c:103: if (shift < 32 && shift) {
arch/arm/vfp/vfpsingle.c-104- exponent -= shift;
--
arch/arm64/net/bpf_jit_comp.c=197=static inline void emit_addr_mov_i64(const int reg, const u64 val,
--
arch/arm64/net/bpf_jit_comp.c-203- emit(A64_MOVN(1, reg, ~tmp & 0xffff, shift), ctx);
arch/arm64/net/bpf_jit_comp.c:204: while (shift < 32) {
arch/arm64/net/bpf_jit_comp.c-205- tmp >>= 16;
--
arch/mips/net/bpf_jit_comp32.c=366=static void emit_shift_r64(struct jit_context *ctx,
--
arch/mips/net/bpf_jit_comp32.c-382- emit(ctx, b, 20); /* PC += 20 */
arch/mips/net/bpf_jit_comp32.c:383: /* +16: shift < 32 */
arch/mips/net/bpf_jit_comp32.c-384- emit(ctx, srl, t1, lo(dst), 1); /* t1 = dl >> 1 */
--
arch/mips/net/bpf_jit_comp32.c-395- emit(ctx, b, 20); /* PC += 20 */
arch/mips/net/bpf_jit_comp32.c:396: /* +16: shift < 32 */
arch/mips/net/bpf_jit_comp32.c-397- emit(ctx, sll, t1, hi(dst), 1); /* t1 = dl << 1 */
--
arch/mips/net/bpf_jit_comp32.c-408- emit(ctx, b, 20); /* PC += 20 */
arch/mips/net/bpf_jit_comp32.c:409: /* +16: shift < 32 */
arch/mips/net/bpf_jit_comp32.c-410- emit(ctx, sll, t1, hi(dst), 1); /* t1 = dl << 1 */
--
arch/parisc/math-emu/sgl_float.h-207- /* sgl_floating_point srcdst; int shift; extension extent */ \
arch/parisc/math-emu/sgl_float.h:208: if (shift < 32) { \
arch/parisc/math-emu/sgl_float.h-209- Extall(extent) = Sall(srcdst) << (32-(shift)); \
--
arch/powerpc/platforms/pseries/iommu.c=2258=static bool is_default_window_table(struct iommu_table_group *table_group, struct iommu_table *tbl)
arch/powerpc/platforms/pseries/iommu.c-2259-{
arch/powerpc/platforms/pseries/iommu.c:2260: if (((tbl->it_size << tbl->it_page_shift) <= table_group->tce32_size) &&
arch/powerpc/platforms/pseries/iommu.c-2261- (tbl->it_page_shift == IOMMU_PAGE_SHIFT_4K))
--
drivers/acpi/acpica/utmath.c=312=acpi_ut_divide(u64 in_dividend,
--
drivers/acpi/acpica/utmath.c-362-
drivers/acpi/acpica/utmath.c:363: /* Normalize the operands (shift until the divisor is < 32 bits) */
drivers/acpi/acpica/utmath.c-364-
--
drivers/comedi/drivers/addi_apci_1032.c=103=static int apci1032_cos_insn_config(struct comedi_device *dev,
--
drivers/comedi/drivers/addi_apci_1032.c-115- shift = data[3];
drivers/comedi/drivers/addi_apci_1032.c:116: if (shift < 32) {
drivers/comedi/drivers/addi_apci_1032.c-117- oldmask = (1U << shift) - 1;
--
drivers/comedi/drivers/addi_apci_1564.c=328=static int apci1564_cos_insn_config(struct comedi_device *dev,
--
drivers/comedi/drivers/addi_apci_1564.c-340- shift = data[3];
drivers/comedi/drivers/addi_apci_1564.c:341: if (shift < 32) {
drivers/comedi/drivers/addi_apci_1564.c-342- oldmask = (1U << shift) - 1;
--
drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv04.c=113=powerctrl_1_shift(int chip_version, int reg)
--
drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv04.c-134- */
drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv04.c:135: if (shift > 4 && (chip_version < 0x32 || chip_version == 0x35 ||
drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv04.c-136- chip_version == 0x36 || chip_version >= 0x40))
--
drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c=1014=static int x_tune2(struct cxd2880_tnrdmd *tnr_dmd,
--
drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c-1117- shift_freq = 32767;
drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c:1118: else if (shift_freq < -32768)
drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c-1119- shift_freq = -32768;
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c=1996=static int __shl_imm64(struct nfp_prog *nfp_prog, u8 dst, u8 shift_amt)
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2000-
drivers/net/ethernet/netronome/nfp/bpf/jit.c:2001: if (shift_amt < 32) {
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2002- emit_shf(nfp_prog, reg_both(dst + 1), reg_a(dst + 1),
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c=2111=static int __shr_imm64(struct nfp_prog *nfp_prog, u8 dst, u8 shift_amt)
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2115-
drivers/net/ethernet/netronome/nfp/bpf/jit.c:2116: if (shift_amt < 32) {
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2117- emit_shf(nfp_prog, reg_both(dst), reg_a(dst + 1), SHF_OP_NONE,
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c=2215=static int __ashr_imm64(struct nfp_prog *nfp_prog, u8 dst, u8 shift_amt)
--
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2219-
drivers/net/ethernet/netronome/nfp/bpf/jit.c:2220: if (shift_amt < 32) {
drivers/net/ethernet/netronome/nfp/bpf/jit.c-2221- emit_shf(nfp_prog, reg_both(dst), reg_a(dst + 1), SHF_OP_NONE,
--
drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c=45=static int meson_pmx_calc_reg_and_offset(const struct meson_pmx_bank *bank,
--
drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c-52-
drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c:53: *reg = bank->reg + (bank->offset + (shift << 2)) / 32;
drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c:54: *offset = (bank->offset + (shift << 2)) % 32;
drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c-55-
--
drivers/scsi/mpi3mr/mpi3mr_app.c=1953=static int mpi3mr_build_nvme_sgl(struct mpi3mr_ioc *mrioc,
--
drivers/scsi/mpi3mr/mpi3mr_app.c-1964- u64 sgemod_mask = ((u64)((mrioc->facts.sge_mod_mask) <<
drivers/scsi/mpi3mr/mpi3mr_app.c:1965: mrioc->facts.sge_mod_shift) << 32);
drivers/scsi/mpi3mr/mpi3mr_app.c-1966- u64 sgemod_val = ((u64)(mrioc->facts.sge_mod_value) <<
drivers/scsi/mpi3mr/mpi3mr_app.c:1967: mrioc->facts.sge_mod_shift) << 32;
drivers/scsi/mpi3mr/mpi3mr_app.c-1968- u32 size;
--
drivers/scsi/mpi3mr/mpi3mr_app.c=2050=static int mpi3mr_build_nvme_prp(struct mpi3mr_ioc *mrioc,
--
drivers/scsi/mpi3mr/mpi3mr_app.c-2063- u64 sgemod_mask = ((u64)((mrioc->facts.sge_mod_mask) <<
drivers/scsi/mpi3mr/mpi3mr_app.c:2064: mrioc->facts.sge_mod_shift) << 32);
drivers/scsi/mpi3mr/mpi3mr_app.c-2065- u64 sgemod_val = ((u64)(mrioc->facts.sge_mod_value) <<
drivers/scsi/mpi3mr/mpi3mr_app.c:2066: mrioc->facts.sge_mod_shift) << 32;
drivers/scsi/mpi3mr/mpi3mr_app.c-2067- u16 dev_handle = nvme_encap_request->dev_handle;
--
drivers/thermal/qcom/tsens.c=189=static u32 tsens_read_cell(const struct tsens_single_value *cell, u8 len, u32 *data0, u32 *data1)
--
drivers/thermal/qcom/tsens.c-193-
drivers/thermal/qcom/tsens.c:194: if (cell->shift + len <= 32) {
drivers/thermal/qcom/tsens.c-195- val = data[cell->idx] >> cell->shift;
--
drivers/video/fbdev/tgafb.c=632=tgafb_mono_imageblit(struct fb_info *info, const struct fb_image *image)
--
drivers/video/fbdev/tgafb.c-706-
drivers/video/fbdev/tgafb.c:707: if (width + shift <= 32) {
drivers/video/fbdev/tgafb.c-708- unsigned long bwidth;
--
include/linux/bitfield.h=257=__MAKE_OP(64)
--
include/linux/bitfield.h-264- typeof(__mask) __val = (val); \
include/linux/bitfield.h:265: unsigned int __shift = BITS_PER_TYPE(__mask) <= 32 ? \
include/linux/bitfield.h-266- __ffs(__mask) : __ffs64(__mask); \
--
include/linux/bitfield.h-273- typeof(__mask) __reg = (reg); \
include/linux/bitfield.h:274: unsigned int __shift = BITS_PER_TYPE(__mask) <= 32 ? \
include/linux/bitfield.h-275- __ffs(__mask) : __ffs64(__mask); \
--
rust/kernel/num/bounded.rs=459= pub fn cast<U>(self) -> Bounded<U, N>
--
rust/kernel/num/bounded.rs-482- /// let v = Bounded::<u32, 16>::new::<0xff00>();
rust/kernel/num/bounded.rs:483: /// let v_shifted: Bounded::<u32, 8> = v.shr::<8, _>();
rust/kernel/num/bounded.rs-484- ///
--
rust/kernel/num/bounded.rs=487= pub fn shr<const SHIFT: u32, const RES: u32>(self) -> Bounded<T, RES> {
--
rust/kernel/num/bounded.rs-503- /// let v = Bounded::<u32, 8>::new::<0xff>();
rust/kernel/num/bounded.rs:504: /// let v_shifted: Bounded::<u32, 16> = v.shl::<8, _>();
rust/kernel/num/bounded.rs-505- ///
]
|
| 23/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 8778
output: 20
thoughts: 653
Thoughts: **Analyzing the Safe Bit Shift Check**
Okay, let's break this down. The core question is about safely checking `(1 << shift) == value` when both `shift` and `value` are 32-bit unsigned integers read from disk. The crucial concern is preventing a shift-out-of-bounds error. I need to be *absolutely* sure this operation is safe, both in terms of C's rules and Linux kernel coding conventions.
First, I need to remind myself of the fundamental C rules. `1` defaults to a signed `int` (32 bits on most Linux systems), and any shift count of 32 or greater is undefined behavior (`shift >= 32`). The language standard is clear on this: the behavior is undefined when the right operand (the shift amount) is greater or equal to the width of the left operand's promoted type. Using an unsigned constant, like `1U << shift`, doesn't magically make it safe if `shift` is too big. Undefined Behavior Sanitizer (UBSan) would flag that as a shift-out-of-bounds error. Even with `1 << 31`, there's potential for signed integer overflow (which is UB or implementation-defined, but it's risky).
Now, if `shift` is *guaranteed* to be a `u32` (an unsigned 32-bit integer), that changes things. When `shift >= 32`, the shift effectively represents a value beyond the representable range of a 32-bit unsigned integer. Any shift amount >= 32 produces a value that is either undefined behavior (according to C standards) or an overflow condition. Because the *result* of the left shift is being compared to `value`, which is also a `u32`, and thus constrained to the range 0 to $2^{32} - 1$, then $2^{shift}$ is always greater than `value` and the condition `(1U << shift) == value` cannot evaluate to true when `shift >= 32`.
So, the logic seems straightforward: If `shift < 32`, we should be able to evaluate `(1U << shift) == value` safely. If `shift >= 32`, the comparison will *always* be false. I think there is likely a need to protect this behavior to ensure that the undefined behavior is avoided.
Now, I'll shift gears and look for similar patterns within the Linux kernel itself. I'll search the `fs/` and `include/linux/` directories and other subsystems for examples of how this kind of bit-shift check is handled. I expect the kernel code to provide robust and concise solutions. That search will inform me if there are other considerations or helper functions used to deal with this, such as masking or pre-checks. This isn't just about correctness; it's about following established, tested practices.
|
| 24/4 |
2026/08/26 17:49 |
tool |
grepper |
0m
Args: map[Expression:1U? << .* ==]
Results: map[Output:
Full output is too long, showing 500 out of 1016 lines.
Use more precise expression if possible.
arch/arm/mach-omap2/sdrc2xxx.c=59=u32 omap2xxx_sdrc_dll_is_unlocked(void)
--
arch/arm/mach-omap2/sdrc2xxx.c-63-
arch/arm/mach-omap2/sdrc2xxx.c:64: if ((dll_state & (1 << 2)) == (1 << 2))
arch/arm/mach-omap2/sdrc2xxx.c-65- return 1;
--
arch/arm/mach-omap2/sdrc2xxx.c=112=void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
--
arch/arm/mach-omap2/sdrc2xxx.c-131- /* With DDR we need to determine the low frequency DLL value */
arch/arm/mach-omap2/sdrc2xxx.c:132: if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
arch/arm/mach-omap2/sdrc2xxx.c-133- mem_timings.dll_mode = M_UNLOCK;
--
arch/arm/mm/alignment.c-50-
arch/arm/mm/alignment.c:51:#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
arch/arm/mm/alignment.c-52-
--
arch/arm/vfp/vfpsingle.c=72=u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions, const char *func)
--
arch/arm/vfp/vfpsingle.c-137- incr = 1 << VFP_SINGLE_LOW_BITS;
arch/arm/vfp/vfpsingle.c:138: if ((significand & (1 << (VFP_SINGLE_LOW_BITS + 1))) == 0)
arch/arm/vfp/vfpsingle.c-139- incr -= 1;
--
arch/arm64/kernel/compat_alignment.c-26-
arch/arm64/kernel/compat_alignment.c:27:#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
arch/arm64/kernel/compat_alignment.c-28-
--
arch/m68k/atari/ataints.c=360=unsigned int atari_register_vme_int(void)
--
arch/m68k/atari/ataints.c-364- for (i = 0; i < 32; i++)
arch/m68k/atari/ataints.c:365: if ((free_vme_vec_bitmap & (1 << i)) == 0)
arch/m68k/atari/ataints.c-366- break;
--
arch/mips/alchemy/common/clock.c=698=static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
--
arch/mips/alchemy/common/clock.c-706- t = parent_rate / (((v >> sh) & 0xff) + 1);
arch/mips/alchemy/common/clock.c:707: if ((v & (1 << 30)) == 0) /* test scale bit */
arch/mips/alchemy/common/clock.c-708- t /= 2;
--
arch/mips/mm/cerr-sb1.c=319=static uint32_t extract_ic(unsigned short addr, int data)
--
arch/mips/mm/cerr-sb1.c-357- va = (taglo & 0xC0000FFFFFFFE000ULL) | addr;
arch/mips/mm/cerr-sb1.c:358: if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3))
arch/mips/mm/cerr-sb1.c-359- va |= 0x3FFFF00000000000ULL;
--
arch/mips/pci/ops-mace.c=40=mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
--
arch/mips/pci/ops-mace.c-66- if (bus->number == 0 && reg == 0x40 && size == 4 &&
arch/mips/pci/ops-mace.c:67: (devfn == (1 << 3) || devfn == (2 << 3)))
arch/mips/pci/ops-mace.c-68- *val |= 0x1000;
--
arch/mips/pic32/pic32mzda/early_clk.c=29=u32 pic32_get_sysclk(void)
--
arch/mips/pic32/pic32mzda/early_clk.c-55- pllclk = plliclk ? FRC_CLK : PIC32_POSC_FREQ;
arch/mips/pic32/pic32mzda/early_clk.c:56: frcdivn = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
arch/mips/pic32/pic32mzda/early_clk.c-57-
--
arch/powerpc/xmon/ppc-opc.c=1158=extract_bdm (unsigned long insn,
--
arch/powerpc/xmon/ppc-opc.c-1163- {
arch/powerpc/xmon/ppc-opc.c:1164: if (((insn & (1 << 21)) == 0) != ((insn & (1 << 15)) == 0))
arch/powerpc/xmon/ppc-opc.c-1165- *invalid = 1;
--
arch/powerpc/xmon/ppc-opc.c=1203=extract_bdp (unsigned long insn,
--
arch/powerpc/xmon/ppc-opc.c-1208- {
arch/powerpc/xmon/ppc-opc.c:1209: if (((insn & (1 << 21)) == 0) == ((insn & (1 << 15)) == 0))
arch/powerpc/xmon/ppc-opc.c-1210- *invalid = 1;
--
arch/sparc/include/asm/backoff.h-39- * on earlier chips, we shift the backoff value up by 7 bits. (Three
arch/sparc/include/asm/backoff.h:40: * %ccr reads block for about 128 cycles, 1 << 7 == 128) We write the
arch/sparc/include/asm/backoff.h-41- * whole amount we want to block into the pause register, rather than
--
arch/sparc/mm/ultra.S=807=xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
--
arch/sparc/mm/ultra.S-812- sethi %hi(L1DCACHE_SIZE), %g3 ! D$ size == 16K
arch/sparc/mm/ultra.S:813: sub %g3, (1 << 5), %g3 ! D$ linesize == 32
arch/sparc/mm/ultra.S-814-1: ldxa [%g3] ASI_DCACHE_TAG, %g2
--
arch/um/os-Linux/skas/process.c=117=void wait_stub_done(int pid)
--
arch/um/os-Linux/skas/process.c-125-
arch/um/os-Linux/skas/process.c:126: if (((1 << WSTOPSIG(status)) & STUB_SIG_MASK) == 0)
arch/um/os-Linux/skas/process.c-127- break;
--
arch/x86/kernel/early-quirks.c=32=static void __init fix_hypertransport_config(int num, int slot, int func)
--
arch/x86/kernel/early-quirks.c-44- "on hypertransport bus\n");
arch/x86/kernel/early-quirks.c:45: if ((htcfg & (1 << 17)) == 0) {
arch/x86/kernel/early-quirks.c-46- printk(KERN_INFO "Enabling hypertransport extended "
--
arch/x86/kvm/i8259.c=123=static inline int get_priority(struct kvm_kpic_state *s, int mask)
--
arch/x86/kvm/i8259.c-128- priority = 0;
arch/x86/kvm/i8259.c:129: while ((mask & (1 << ((priority + s->priority_add) & 7))) == 0)
arch/x86/kvm/i8259.c-130- priority++;
--
drivers/acpi/nfit/core.c=1736=__weak void nfit_intel_shutdown_status(struct nfit_mem *nfit_mem)
--
drivers/acpi/nfit/core.c-1755-
drivers/acpi/nfit/core.c:1756: if ((nfit_mem->dsm_mask & (1 << func)) == 0)
drivers/acpi/nfit/core.c-1757- return;
--
drivers/ata/ahci.c=2617=static void ahci_remap_check(struct pci_dev *pdev, int bar,
--
drivers/ata/ahci.c-2633- for (i = 0; i < AHCI_MAX_REMAP; i++) {
drivers/ata/ahci.c:2634: if ((cap & (1 << i)) == 0)
drivers/ata/ahci.c-2635- continue;
--
drivers/ata/pata_jmicron.c=42=static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
--
drivers/ata/pata_jmicron.c-84- case PORT_PATA0:
drivers/ata/pata_jmicron.c:85: if ((control & (1 << 5)) == 0)
drivers/ata/pata_jmicron.c-86- return -ENOENT;
--
drivers/ata/pata_jmicron.c-93- /* Bit 21 is set if the port is enabled */
drivers/ata/pata_jmicron.c:94: if ((control5 & (1 << 21)) == 0)
drivers/ata/pata_jmicron.c-95- return -ENOENT;
--
drivers/ata/sata_mv.c=3284=static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
--
drivers/ata/sata_mv.c-3290- tmp = readl(mmio + RESET_CFG);
drivers/ata/sata_mv.c:3291: if ((tmp & (1 << 0)) == 0) {
drivers/ata/sata_mv.c-3292- hpriv->signal[idx].amps = 0x7 << 8;
--
drivers/ata/sata_sx4.c=85=enum {
--
drivers/ata/sata_sx4.c-173- PDC_TIMER_MODE_PERIODIC = 0, /* bits 9:8 == 00 */
drivers/ata/sata_sx4.c:174: PDC_TIMER_MODE_ONCE = (1 << 8), /* bits 9:8 == 01 */
drivers/ata/sata_sx4.c-175- PDC_TIMER_ENABLE = (1 << 7),
--
drivers/bcma/driver_mips.c=88=static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
--
drivers/bcma/driver_mips.c-122- list_for_each_entry(core, &bus->cores, list) {
drivers/bcma/driver_mips.c:123: if ((1 << bcma_core_mips_irqflag(core)) ==
drivers/bcma/driver_mips.c-124- irqinitmask) {
--
drivers/block/drbd/drbd_vli.h=134=static inline int vli_decode_bits(u64 *out, const u64 in)
--
drivers/block/drbd/drbd_vli.h-139- do { \
drivers/block/drbd/drbd_vli.h:140: if ((in & ((1 << b) -1)) == v) { \
drivers/block/drbd/drbd_vli.h-141- *out = ((in & ((~0ULL) >> (64-t))) >> b) + adj; \
--
drivers/char/ipmi/ipmi_msghandler.c=1733=int ipmi_unregister_for_cmd(struct ipmi_user *user,
--
drivers/char/ipmi/ipmi_msghandler.c-1748- for (i = 0; i < IPMI_NUM_CHANNELS; i++) {
drivers/char/ipmi/ipmi_msghandler.c:1749: if (((1 << i) & chans) == 0)
drivers/char/ipmi/ipmi_msghandler.c-1750- continue;
--
drivers/clk/bcm/clk-iproc-asiu.c=67=static unsigned long iproc_asiu_clk_recalc_rate(struct clk_hw *hw,
--
drivers/clk/bcm/clk-iproc-asiu.c-81- val = readl(asiu->div_base + clk->div.offset);
drivers/clk/bcm/clk-iproc-asiu.c:82: if ((val & (1 << clk->div.en_shift)) == 0) {
drivers/clk/bcm/clk-iproc-asiu.c-83- clk->rate = parent_rate;
--
drivers/clk/bcm/clk-iproc-pll.c=276=static bool pll_fractional_change_only(struct iproc_pll *pll,
--
drivers/clk/bcm/clk-iproc-pll.c-285- val = readl(pll->status_base + ctrl->status.offset);
drivers/clk/bcm/clk-iproc-pll.c:286: if ((val & (1 << ctrl->status.shift)) == 0)
drivers/clk/bcm/clk-iproc-pll.c-287- return false;
--
drivers/clk/bcm/clk-iproc-pll.c=447=static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
--
drivers/clk/bcm/clk-iproc-pll.c-462- val = readl(pll->status_base + ctrl->status.offset);
drivers/clk/bcm/clk-iproc-pll.c:463: if ((val & (1 << ctrl->status.shift)) == 0)
drivers/clk/bcm/clk-iproc-pll.c-464- return 0;
--
drivers/clk/clk-apple-nco.c=189=static unsigned long applnco_recalc_rate(struct clk_hw *hw,
--
drivers/clk/clk-apple-nco.c-204- */
drivers/clk/clk-apple-nco.c:205: if (inc1 >= (1 << 31) || inc2 < (1 << 31) || (inc1 == 0 && inc2 == 0))
drivers/clk/clk-apple-nco.c-206- return 0;
--
drivers/cpufreq/powernow-k7.c=118=static int check_powernow(void)
--
drivers/cpufreq/powernow-k7.c-152-
drivers/cpufreq/powernow-k7.c:153: if ((edx & (1 << 1 | 1 << 2)) == 0x6)
drivers/cpufreq/powernow-k7.c-154- pr_cont(" and ");
--
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c=382=static int usb_gpib_attach(struct gpib_board *board, const struct gpib_board_config *config)
--
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c-402- for (j = 0 ; j < MAX_DEV ; j++) {
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:403: if ((assigned_usb_minors & 1 << j) == 0)
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c-404- continue;
--
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c-417- for (j = 0 ; j < MAX_DEV ; j++) {
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c:418: if ((assigned_usb_minors & 1 << j) == 0)
drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c-419- continue;
--
drivers/gpio/gpio-cs5535.c=199=static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
--
drivers/gpio/gpio-cs5535.c-206- /* check if this pin is available */
drivers/gpio/gpio-cs5535.c:207: if ((mask & (1 << offset)) == 0) {
drivers/gpio/gpio-cs5535.c-208- dev_info(&chip->pdev->dev,
--
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c=2003=static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
--
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c-2115-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:2116: if ((amdgpu_ip_block_mask & (1 << i)) == 0) {
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c-2117- dev_warn(adev->dev, "disabled ip block: %d <%s>\n", i,
--
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c=1152=static uint8_t amdgpu_discovery_get_harvest_info(struct amdgpu_device *adev,
--
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1161- if (!amdgpu_ip_version(adev, VCE_HWIP, 0))
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1162: harvest = ((1 << inst) & adev->vcn.inst_mask) == 0;
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1163- break;
--
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1171- case GC_HWID:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1172: harvest = ((1 << inst) & adev->gfx.xcc_mask) == 0;
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1173- break;
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1174- case SDMA0_HWID:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1175: harvest = ((1 << inst) & adev->sdma.sdma_mask) == 0;
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c-1176- break;
--
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c=1416=static u32 amdgpu_virt_rlcg_vfi_reg_rw(struct amdgpu_device *adev, u32 offset, u32 v, u32 flag, u32 xcc_id)
--
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c-1442-
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:1443: if (adev->gfx.xcc_mask && (((1 << xcc_id) & adev->gfx.xcc_mask) == 0)) {
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c-1444- dev_err(adev->dev, "VFi invalid XCC, xcc_id=0x%x\n", xcc_id);
--
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c=1543=u32 amdgpu_virt_rlcg_reg_rw(struct amdgpu_device *adev, u32 offset, u32 v, u32 flag, u32 xcc_id)
--
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c-1564-
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:1565: if (adev->gfx.xcc_mask && (((1 << xcc_id) & adev->gfx.xcc_mask) == 0)) {
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c-1566- dev_err(adev->dev, "invalid xcc\n");
--
drivers/gpu/drm/amd/display/dc/link/link_resource.c=75=void link_restore_res_map(const struct dc *dc, uint32_t *map)
--
drivers/gpu/drm/amd/display/dc/link/link_resource.c-86- for (i = 0; i < dc->caps.max_links; i++) {
drivers/gpu/drm/amd/display/dc/link/link_resource.c:87: if ((hpo_dp_recycle_map & (1 << i)) == 0) {
drivers/gpu/drm/amd/display/dc/link/link_resource.c-88- link = dc->links[i];
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c=999=static int fiji_populate_all_graphic_levels(struct pp_hwmgr *hwmgr)
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c-1061- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c:1062: (1 << lowest_pcie_level_enabled)) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c-1063- lowest_pcie_level_enabled++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c-1066- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c:1067: (1 << (lowest_pcie_level_enabled + 1 + count))) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c-1068- count++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c=959=static int iceland_populate_all_graphic_levels(struct pp_hwmgr *hwmgr)
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c-1010- while ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c:1011: (1 << lowest_pcie_level_enabled)) == 0) {
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c-1012- lowest_pcie_level_enabled++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c-1016- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c:1017: (1 << (lowest_pcie_level_enabled + 1 + count))) == 0)) {
drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c-1018- count++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c=1036=static int polaris10_populate_all_graphic_levels(struct pp_hwmgr *hwmgr)
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c-1121- ((hw_data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c:1122: (1 << lowest_pcie_level_enabled)) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c-1123- lowest_pcie_level_enabled++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c-1126- ((hw_data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c:1127: (1 << (lowest_pcie_level_enabled + 1 + count))) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c-1128- count++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c=864=static int vegam_populate_all_graphic_levels(struct pp_hwmgr *hwmgr)
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c-932- ((hw_data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c:933: (1 << lowest_pcie_level_enabled)) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c-934- lowest_pcie_level_enabled++;
--
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c-937- ((hw_data->dpm_level_enable_mask.pcie_dpm_enable_mask &
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c:938: (1 << (lowest_pcie_level_enabled + 1 + count))) == 0))
drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c-939- count++;
--
drivers/gpu/drm/bridge/tc358767.c-172-#define INT_SYSERR BIT(16)
drivers/gpu/drm/bridge/tc358767.c:173:#define INT_GPIO_H(x) (1 << (x == 0 ? 2 : 10))
drivers/gpu/drm/bridge/tc358767.c:174:#define INT_GPIO_LC(x) (1 << (x == 0 ? 3 : 11))
drivers/gpu/drm/bridge/tc358767.c-175-
--
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt=42=device_reset@unbind-reset-rebind
--
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt-47-# ------------[ cut here ]------------
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt:48:# i915 0000:00:02.0: [drm] drm_WARN_ON((val & (1 << 30)) == 0)
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt-49-# WARNING: CPU: 4 PID: 472 at drivers/gpu/drm/i915/display/intel_cdclk.c:944 skl_get_cdclk+0x1ca/0x360
--
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt-99-# ------------[ cut here ]------------
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt:100:# i915 0000:00:02.0: [drm] drm_WARN_ON((val & (1 << 30)) == 0)
drivers/gpu/drm/ci/xfails/i915-kbl-skips.txt-101-# WARNING: CPU: 1 PID: 472 at drivers/gpu/drm/i915/display/intel_cdclk.c:944 skl_get_cdclk+0x1ca/0x360
--
drivers/gpu/drm/drm_panic_qr.rs=777= fn draw_maskinfo(&mut self) {
--
drivers/gpu/drm/drm_panic_qr.rs-784- }
drivers/gpu/drm/drm_panic_qr.rs:785: if info & (1 << (14 - k)) == 0 {
drivers/gpu/drm/drm_panic_qr.rs-786- self.set(k + skip, 8);
--
drivers/gpu/drm/drm_panic_qr.rs-794- }
drivers/gpu/drm/drm_panic_qr.rs:795: if info & (1 << (7 - k)) == 0 {
drivers/gpu/drm/drm_panic_qr.rs-796- self.set(8, 8 - skip - k);
--
drivers/gpu/drm/drm_panic_qr.rs=809= fn draw_version_info(&mut self) {
--
drivers/gpu/drm/drm_panic_qr.rs-815- for y in 0..6 {
drivers/gpu/drm/drm_panic_qr.rs:816: if vinfo & (1 << (x + y * 3)) == 0 {
drivers/gpu/drm/drm_panic_qr.rs-817- self.set(x + pos, y);
--
drivers/gpu/drm/i915/display/intel_display_regs.h-16-#define DPIO_CTL _MMIO(VLV_DISPLAY_BASE + 0x2110)
drivers/gpu/drm/i915/display/intel_display_regs.h:17:#define DPIO_MODSEL1 (1 << 3) /* if ref clk b == 27 */
drivers/gpu/drm/i915/display/intel_display_regs.h:18:#define DPIO_MODSEL0 (1 << 2) /* if ref clk a == 27 */
drivers/gpu/drm/i915/display/intel_display_regs.h-19-#define DPIO_SFR_BYPASS (1 << 1)
--
drivers/gpu/drm/i915/display/intel_opregion.c=275=static int check_swsci_function(struct intel_display *display, u32 function)
--
drivers/gpu/drm/i915/display/intel_opregion.c-295- if ((opregion->swsci_sbcb_sub_functions &
drivers/gpu/drm/i915/display/intel_opregion.c:296: (1 << sub_function)) == 0)
drivers/gpu/drm/i915/display/intel_opregion.c-297- return -EINVAL;
--
drivers/gpu/drm/i915/display/intel_opregion.c-299- if ((opregion->swsci_gbda_sub_functions &
drivers/gpu/drm/i915/display/intel_opregion.c:300: (1 << sub_function)) == 0)
drivers/gpu/drm/i915/display/intel_opregion.c-301- return -EINVAL;
--
drivers/gpu/drm/i915/gvt/handlers.c=1658=static int gen9_trtte_write(struct intel_vgpu *vgpu, unsigned int offset,
--
drivers/gpu/drm/i915/gvt/handlers.c-1663-
drivers/gpu/drm/i915/gvt/handlers.c:1664: if ((trtte & 1) && (trtte & (1 << 1)) == 0) {
drivers/gpu/drm/i915/gvt/handlers.c-1665- drm_WARN(&i915->drm, 1,
--
drivers/gpu/drm/nouveau/nouveau_bios.c=1396=parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
--
drivers/gpu/drm/nouveau/nouveau_bios.c-1526- entry->duallink_possible =
drivers/gpu/drm/nouveau/nouveau_bios.c:1527: ((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
drivers/gpu/drm/nouveau/nouveau_bios.c-1528- } else {
--
drivers/gpu/drm/omapdrm/dss/dsi.c=407=static irqreturn_t omap_dsi_irq_handler(int irq, void *arg)
--
drivers/gpu/drm/omapdrm/dss/dsi.c-430- for (i = 0; i < 4; ++i) {
drivers/gpu/drm/omapdrm/dss/dsi.c:431: if ((irqstatus & (1 << i)) == 0) {
drivers/gpu/drm/omapdrm/dss/dsi.c-432- vcstatus[i] = 0;
--
drivers/gpu/drm/qxl/qxl_dev.h=801=enum qxl_bitmap_flags {
--
drivers/gpu/drm/qxl/qxl_dev.h-803- QXL_BITMAP_UNSTABLE = (1 << 1),
drivers/gpu/drm/qxl/qxl_dev.h:804: QXL_BITMAP_TOP_DOWN = (1 << 2), /* == SPICE_BITMAP_FLAGS_TOP_DOWN */
drivers/gpu/drm/qxl/qxl_dev.h-805-};
--
drivers/gpu/drm/radeon/ci_dpm.c=4146=static u32 ci_get_lowest_enabled_level(struct radeon_device *rdev,
--
drivers/gpu/drm/radeon/ci_dpm.c-4150-
drivers/gpu/drm/radeon/ci_dpm.c:4151: while ((level_mask & (1 << level)) == 0)
drivers/gpu/drm/radeon/ci_dpm.c-4152- level++;
--
drivers/infiniband/hw/hfi1/pcie.c=935=int do_pcie_gen3_transition(struct hfi1_devdata *dd)
--
drivers/infiniband/hw/hfi1/pcie.c-1328- & ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_MASK;
drivers/infiniband/hw/hfi1/pcie.c:1329: if ((status & (1 << dd->hfi1_id)) == 0) {
drivers/infiniband/hw/hfi1/pcie.c-1330- dd_dev_err(dd,
--
drivers/infiniband/hw/hfi1/ruc.c=493=void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
--
drivers/infiniband/hw/hfi1/ruc.c-509- if (!loopback && ((rdma_ah_get_dlid(&qp->remote_ah_attr) &
drivers/infiniband/hw/hfi1/ruc.c:510: ~((1 << ps.ppd->lmc) - 1)) ==
drivers/infiniband/hw/hfi1/ruc.c-511- ps.ppd->lid)) {
--
drivers/infiniband/hw/hfi1/ruc.c-519- if (!loopback && ((rdma_ah_get_dlid(&qp->remote_ah_attr) &
drivers/infiniband/hw/hfi1/ruc.c:520: ~((1 << ps.ppd->lmc) - 1)) ==
drivers/infiniband/hw/hfi1/ruc.c-521- ps.ppd->lid)) {
--
drivers/infiniband/hw/hfi1/tid_rdma.c=3282=void setup_tid_rdma_wqe(struct rvt_qp *qp, struct rvt_swqe *wqe)
--
drivers/infiniband/hw/hfi1/tid_rdma.c-3290-
drivers/infiniband/hw/hfi1/tid_rdma.c:3291: if ((rdma_ah_get_dlid(&qp->remote_ah_attr) & ~((1 << ppd->lmc) - 1)) ==
drivers/infiniband/hw/hfi1/tid_rdma.c-3292- ppd->lid)
--
drivers/input/keyboard/imx_keypad.c=79=static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
--
drivers/input/keyboard/imx_keypad.c-85- for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
drivers/input/keyboard/imx_keypad.c:86: if ((keypad->cols_en_mask & (1 << col)) == 0)
drivers/input/keyboard/imx_keypad.c-87- continue;
--
drivers/input/keyboard/imx_keypad.c=144=static void imx_keypad_fire_events(struct imx_keypad *keypad,
--
drivers/input/keyboard/imx_keypad.c-153-
drivers/input/keyboard/imx_keypad.c:154: if ((keypad->cols_en_mask & (1 << col)) == 0)
drivers/input/keyboard/imx_keypad.c-155- continue; /* Column is not enabled */
--
drivers/input/keyboard/imx_keypad.c-163- for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
drivers/input/keyboard/imx_keypad.c:164: if ((keypad->rows_en_mask & (1 << row)) == 0)
drivers/input/keyboard/imx_keypad.c-165- continue; /* Row is not enabled */
drivers/input/keyboard/imx_keypad.c:166: if ((bits_changed & (1 << row)) == 0)
drivers/input/keyboard/imx_keypad.c-167- continue; /* Row does not contain changes */
--
drivers/input/keyboard/imx_keypad.c=184=static void imx_keypad_check_for_events(struct timer_list *t)
--
drivers/input/keyboard/imx_keypad.c-198- for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
drivers/input/keyboard/imx_keypad.c:199: if ((keypad->cols_en_mask & (1 << i)) == 0)
drivers/input/keyboard/imx_keypad.c-200- continue;
--
drivers/input/mouse/elantech.c=653=static void process_packet_status_v4(struct psmouse *psmouse)
--
drivers/input/mouse/elantech.c-662- for (i = 0; i < ETP_MAX_FINGERS; i++) {
drivers/input/mouse/elantech.c:663: if ((fingers & (1 << i)) == 0) {
drivers/input/mouse/elantech.c-664- input_mt_slot(dev, i);
--
drivers/iommu/amd/init.c=1867=static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h,
--
drivers/iommu/amd/init.c-1906- /* GAM requires GA mode. */
drivers/iommu/amd/init.c:1907: if ((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0)
drivers/iommu/amd/init.c-1908- amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
--
drivers/iommu/amd/init.c-1917- /* XT and GAM require GA mode. */
drivers/iommu/amd/init.c:1918: if ((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0) {
drivers/iommu/amd/init.c-1919- amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
--
drivers/iommu/omap-iopgtable.h=66=static inline phys_addr_t omap_iommu_translate(unsigned long d, dma_addr_t va,
--
drivers/iommu/omap-iopgtable.h-79-#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE)
drivers/iommu/omap-iopgtable.h:80:#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION)
drivers/iommu/omap-iopgtable.h:81:#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER)
drivers/iommu/omap-iopgtable.h-82-
--
drivers/macintosh/windfarm_fcu_controls.c=166=static int wf_fcu_fan_get_rpm(struct wf_control *ct, s32 *value)
--
drivers/macintosh/windfarm_fcu_controls.c-182- return -EIO;
drivers/macintosh/windfarm_fcu_controls.c:183: if ((active & (1 << fan->id)) == 0)
drivers/macintosh/windfarm_fcu_controls.c-184- return -ENXIO;
--
drivers/macintosh/windfarm_fcu_controls.c=223=static int wf_fcu_fan_get_pwm(struct wf_control *ct, s32 *value)
--
drivers/macintosh/windfarm_fcu_controls.c-239- return -EIO;
drivers/macintosh/windfarm_fcu_controls.c:240: if ((active & (1 << fan->id)) == 0)
drivers/macintosh/windfarm_fcu_controls.c-241- return -ENXIO;
--
drivers/mailbox/rockchip-mailbox.c=107=static irqreturn_t rockchip_mbox_irq(int irq, void *dev_id)
--
drivers/mailbox/rockchip-mailbox.c-113- for (idx = 0; idx < mb->mbox.num_chans; idx++) {
drivers/mailbox/rockchip-mailbox.c:114: if ((status & (1 << idx)) && (irq == mb->chans[idx].irq)) {
drivers/mailbox/rockchip-mailbox.c-115- /* Clear mbox interrupt */
--
drivers/media/dvb-frontends/dib8000.c=2367=static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
--
drivers/media/dvb-frontends/dib8000.c-2450- if ((((~state->seg_diff_mask) >> i) & 1) == 1) {
drivers/media/dvb-frontends/dib8000.c:2451: p_cfr_left_edge += (1 << i) * ((i == 0) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i - 1)) & 1) == 0));
drivers/media/dvb-frontends/dib8000.c:2452: p_cfr_right_edge += (1 << i) * ((i == 12) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i + 1)) & 1) == 0));
drivers/media/dvb-frontends/dib8000.c-2453- }
--
drivers/media/dvb-frontends/zl10353.c=359=static int zl10353_get_parameters(struct dvb_frontend *fe,
--
drivers/media/dvb-frontends/zl10353.c-379- return -EREMOTEIO;
drivers/media/dvb-frontends/zl10353.c:380: if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0)
drivers/media/dvb-frontends/zl10353.c-381- return -EINVAL; /* no FE or TPS lock */
--
drivers/media/i2c/saa7115.c=1247=static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
--
drivers/media/i2c/saa7115.c-1256- v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status);
drivers/media/i2c/saa7115.c:1257: vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
drivers/media/i2c/saa7115.c-1258- return 0;
--
drivers/media/pci/cx23885/altera-ci.c=317=static int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
--
drivers/media/pci/cx23885/altera-ci.c-346-
drivers/media/pci/cx23885/altera-ci.c:347: if ((ret & (1 << (5 - state->nr))) == 0)
drivers/media/pci/cx23885/altera-ci.c-348- break;
--
drivers/media/pci/cx88/cx88-alsa.c=729=static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
--
drivers/media/pci/cx88/cx88-alsa.c-743- /* Pass mute onto any WM8775 */
drivers/media/pci/cx88/cx88-alsa.c:744: if (core->sd_wm8775 && ((1 << 6) == bit))
drivers/media/pci/cx88/cx88-alsa.c-745- wm8775_s_ctrl(core,
--
drivers/media/tuners/mt2060.c=277=static void mt2060_calibrate(struct mt2060_priv *priv)
--
drivers/media/tuners/mt2060.c-309- i = 0;
drivers/media/tuners/mt2060.c:310: while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
drivers/media/tuners/mt2060.c-311- msleep(20);
--
drivers/media/usb/cx231xx/cx231xx-avcore.c=2690=int cx231xx_set_gpio_value(struct cx231xx *dev, int pin_number, int pin_value)
--
drivers/media/usb/cx231xx/cx231xx-avcore.c-2699- /* first do a sanity check - if the Pin is not output, make it output */
drivers/media/usb/cx231xx/cx231xx-avcore.c:2700: if ((dev->gpio_dir & (1 << pin_number)) == 0x00) {
drivers/media/usb/cx231xx/cx231xx-avcore.c-2701- /* It was in input mode */
--
drivers/media/usb/cx231xx/cx231xx-avcore.c=2883=int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
--
drivers/media/usb/cx231xx/cx231xx-avcore.c-2903- } while (((dev->gpio_val &
drivers/media/usb/cx231xx/cx231xx-avcore.c:2904: (1 << dev->board.tuner_scl_gpio)) == 0) &&
drivers/media/usb/cx231xx/cx231xx-avcore.c-2905- (nCnt > 0));
--
drivers/media/usb/cx231xx/cx231xx-avcore.c-2918-
drivers/media/usb/cx231xx/cx231xx-avcore.c:2919: if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) {
drivers/media/usb/cx231xx/cx231xx-avcore.c-2920- dev->gpio_val = gpio_logic_value;
--
drivers/media/usb/go7007/go7007-fw.c=708=static int vti_bitlen(struct go7007 *go)
--
drivers/media/usb/go7007/go7007-fw.c-711-
drivers/media/usb/go7007/go7007-fw.c:712: for (i = 31; (max_time_incr & ((1 << i) - 1)) == max_time_incr; --i)
drivers/media/usb/go7007/go7007-fw.c-713- ;
--
drivers/misc/altera-stapl/altera-comp.c=22=static u32 altera_bits_req(u32 n)
--
drivers/misc/altera-stapl/altera-comp.c-29- /* Look for the highest non-zero bit position */
drivers/misc/altera-stapl/altera-comp.c:30: while ((n & (1 << (SHORT_BITS - 1))) == 0) {
drivers/misc/altera-stapl/altera-comp.c-31- n <<= 1;
--
drivers/mtd/devices/pmc551.c=347=static int __init fixup_pmc551(struct pci_dev *dev)
]
|
| 25/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 23988
output: 36
thoughts: 72
Thoughts: **Investigating Potential Shift-Out-of-Bounds Vulnerabilities**
Okay, let's dive into this. I need to get a handle on potential vulnerabilities related to shift-out-of-bounds errors, specifically those linked to constructs like `(1 << ` or `1U <<`, or just the keyword `shift` in file systems (fs/) or block device (block/) code. My strategy is to zero in on relevant commits and bug fixes that have already addressed such issues. The tool of choice here is, naturally, `git-log`. I'll use it to scour the history for any commits explicitly targeting shift-out-of-bounds vulnerabilities, hoping this uncovers past issues and mitigation strategies that might provide insights or patterns. I'm focusing on the keywords that I think are going to be most relevant. It would be a waste of time to look for anything that isn't connected to the specific areas and keywords listed.
|
| 26/4 |
2026/08/26 17:49 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[shift-out-of-bounds] PathPrefix:fs]
Results: map[Output:cce219b203c4 jfs: add dmapctl integrity check to prevent invalid operations
1e39da974ce6 fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
856db3759202 jfs: fix metapage reference count leak in dbAllocCtl
734aa85390ea Squashfs: check return result of sb_min_blocksize
37bfb464ddca jfs: validate AG parameters in dbMount() to prevent crashes
9c18ea7ffee0 bcachefs: bch2_get_random_u64_below()
6cfe56fbad32 ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
23aab037106d ocfs2: fix UBSAN warning in ocfs2_verify_volume()
a5f5e4698f8a jfs: fix shift-out-of-bounds in dbSplit
5c41f75d1b92 bcachefs: fix shift oob in alloc_lru_idx_fragmentation
]
|
| 27/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 24580
output: 26
thoughts: 50
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Analyzing Recent Commits with `git show`**
Alright, time to get a quick overview of some recent changes. I need to quickly inspect commit `23aab037106d`, `a5f5e4698f8a`, and `37bfb464ddca`. I'll use `git show` for this – it's the fastest way to get a condensed view of the commit metadata, the diff, and any commit message details I need for immediate context. No need for a full `git log` traversal for these; I just want a snapshot to assess the nature and impact of these specific commits, likely as part of a review process or before deciding on a rebase or merge strategy. Looking at the diffs will quickly reveal if there are any significant code changes, introduced bugs, or unexpected behavior. This should give me enough information to determine next steps.
|
| 28/4 |
2026/08/26 17:49 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 23aab037106d46e6168ce1214a958ce9bf317f2e
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Wed Nov 6 12:21:00 2024 +0300
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
Syzbot has reported the following splat triggered by UBSAN:
UBSAN: shift-out-of-bounds in fs/ocfs2/super.c:2336:10
shift exponent 32768 is too large for 32-bit type 'int'
CPU: 2 UID: 0 PID: 5255 Comm: repro Not tainted 6.12.0-rc4-syzkaller-00047-gc2ee9f594da8 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x241/0x360
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? __asan_memset+0x23/0x50
? lockdep_init_map_type+0xa1/0x910
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420
ocfs2_fill_super+0xf9c/0x5750
? __pfx_ocfs2_fill_super+0x10/0x10
? __pfx_validate_chain+0x10/0x10
? __pfx_validate_chain+0x10/0x10
? validate_chain+0x11e/0x5920
? __lock_acquire+0x1384/0x2050
? __pfx_validate_chain+0x10/0x10
? string+0x26a/0x2b0
? widen_string+0x3a/0x310
? string+0x26a/0x2b0
? bdev_name+0x2b1/0x3c0
? pointer+0x703/0x1210
? __pfx_pointer+0x10/0x10
? __pfx_format_decode+0x10/0x10
? __lock_acquire+0x1384/0x2050
? vsnprintf+0x1ccd/0x1da0
? snprintf+0xda/0x120
? __pfx_lock_release+0x10/0x10
? do_raw_spin_lock+0x14f/0x370
? __pfx_snprintf+0x10/0x10
? set_blocksize+0x1f9/0x360
? sb_set_blocksize+0x98/0xf0
? setup_bdev_super+0x4e6/0x5d0
mount_bdev+0x20c/0x2d0
? __pfx_ocfs2_fill_super+0x10/0x10
? __pfx_mount_bdev+0x10/0x10
? vfs_parse_fs_string+0x190/0x230
? __pfx_vfs_parse_fs_string+0x10/0x10
legacy_get_tree+0xf0/0x190
? __pfx_ocfs2_mount+0x10/0x10
vfs_get_tree+0x92/0x2b0
do_new_mount+0x2be/0xb40
? __pfx_do_new_mount+0x10/0x10
__se_sys_mount+0x2d6/0x3c0
? __pfx___se_sys_mount+0x10/0x10
? do_syscall_64+0x100/0x230
? __x64_sys_mount+0x20/0xc0
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f37cae96fda
Code: 48 8b 0d 51 ce 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1e ce 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff6c1aa228 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007fff6c1aa240 RCX: 00007f37cae96fda
RDX: 00000000200002c0 RSI: 0000000020000040 RDI: 00007fff6c1aa240
RBP: 0000000000000004 R08: 00007fff6c1aa280 R09: 0000000000000000
R10: 00000000000008c0 R11: 0000000000000206 R12: 00000000000008c0
R13: 00007fff6c1aa280 R14: 0000000000000003 R15: 0000000001000000
</TASK>
For a really damaged superblock, the value of 'i_super.s_blocksize_bits'
may exceed the maximum possible shift for an underlying 'int'. So add an
extra check whether the aforementioned field represents the valid block
size, which is 512 bytes, 1K, 2K, or 4K.
Link: https://lkml.kernel.org/r/20241106092100.2661330-1-dmantipov@yandex.ru
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+56f7cd1abe4b8e475180@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=56f7cd1abe4b8e475180
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 3d404624bb96..c79b4291777f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2319,6 +2319,7 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
struct ocfs2_blockcheck_stats *stats)
{
int status = -EAGAIN;
+ u32 blksz_bits;
if (memcmp(di->i_signature, OCFS2_SUPER_BLOCK_SIGNATURE,
strlen(OCFS2_SUPER_BLOCK_SIGNATURE)) == 0) {
@@ -2333,11 +2334,15 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
goto out;
}
status = -EINVAL;
- if ((1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits)) != blksz) {
+ /* Acceptable block sizes are 512 bytes, 1K, 2K and 4K. */
+ blksz_bits = le32_to_cpu(di->id2.i_super.s_blocksize_bits);
+ if (blksz_bits < 9 || blksz_bits > 12) {
mlog(ML_ERROR, "found superblock with incorrect block "
- "size: found %u, should be %u\n",
- 1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits),
- blksz);
+ "size bits: found %u, should be 9, 10, 11, or 12\n",
+ blksz_bits);
+ } else if ((1 << le32_to_cpu(blksz_bits)) != blksz) {
+ mlog(ML_ERROR, "found superblock with incorrect block "
+ "size: found %u, should be %u\n", 1 << blksz_bits, blksz);
} else if (le16_to_cpu(di->id2.i_super.s_major_rev_level) !=
OCFS2_MAJOR_REV_LEVEL ||
le16_to_cpu(di->id2.i_super.s_minor_rev_level) !=
]
|
| 29/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 27662
output: 27
thoughts: 155
Thoughts: **OCFS2 Commit Analysis**
Okay, let's dive into this OCFS2 commit. The Syzbot report flagged a shift-out-of-bounds error, specifically on that line: `if ((1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits)) != blksz)`. Hmm, the original code had `(1 << ...)` with a shift exponent derived from the block size bits. The error, "shift exponent 32768 is too large for 32-bit type 'int'," indicates that `le32_to_cpu(di->id2.i_super.s_blocksize_bits)` somehow evaluated to a value exceeding the maximum allowable shift count for an integer. Clearly, the original code didn't account for such large bit sizes.
I need to quickly review the context around that line. I should check out the related commits, `a5f5e4698f8a`, `37bfb464ddca`, and `cce219b203c4`. This will help me understand the evolution of the block size handling within OCFS2 and maybe shed some light on how this potentially oversized bit size was introduced. From there, I can determine the likely root cause and how to properly address this in any follow-up analysis.
|
| 30/4 |
2026/08/26 17:49 |
tool |
git-show |
0m
Args:
Results: map[Output:commit a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d
Author: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Date: Mon Sep 30 13:42:18 2024 +0530
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself.
Reported-by: syzbot+b5ca8a249162c4b9a7d0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ca8a249162c4b9a7d0
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 3ab410059dc2..39957361a7ee 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -1820,6 +1820,9 @@ dbAllocCtl(struct bmap * bmp, s64 nblocks, int l2nb, s64 blkno, s64 * results)
return -EIO;
dp = (struct dmap *) mp->data;
+ if (dp->tree.budmin < 0)
+ return -EIO;
+
/* try to allocate the blocks.
*/
rc = dbAllocDmapLev(bmp, dp, (int) nblocks, l2nb, results);
]
|
| 31/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 28671
output: 31
thoughts: 44
Thoughts: Here's my take on the thought process, as if it were my own:
**Investigating Potential Bitwise Shift Vulnerabilities**
Okay, time to dig deeper. I need to be more thorough in my search for potential vulnerabilities related to bitwise shifts within the kernel. I've got to cast a wider net. My initial scan probably wasn't enough. I'm thinking I should start by looking into the more common patterns of coding where these types of bugs manifest.
I need to expand my search query within the git commit history and the codebase itself. Let's start with more precise search terms. I need to search for instances of things that can lead to integer overflows with bitshifts. I'm going to look specifically for:
* `shift-out-of-bounds` - Clearly, that would be ideal.
* `1 <<` - This catches a lot, but I need to be careful of false positives.
* `1U <<` - The unsigned variant is especially important, and might indicate the intent to avoid the overflow, or the need to check it in the first place
* `shift < 32` - This is a good one to catch shifts of size 32 or greater on 32-bit platforms, or 64 or greater on 64 bit platforms. It might indicate a check that's incomplete, or that needs re-evaluation based on a recent kernel change.
I want to see how these bit shifts are being used within the kernel. If a developer uses a shift operator, how is the value being used? Is there an understanding of the bounds on the value being shifted? Maybe I should consider other bitwise operations too.
I'm focusing on potentially unsafe bit shift operations and overflow scenarios, as these can easily lead to a range of issues, including information leaks, buffer overflows, or even arbitrary code execution. Time to refine those search parameters and get to work.
|
| 32/4 |
2026/08/26 17:49 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[shift exponent] PathPrefix:fs]
Results: map[Output:cce219b203c4 jfs: add dmapctl integrity check to prevent invalid operations
1e39da974ce6 fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
734aa85390ea Squashfs: check return result of sb_min_blocksize
37bfb464ddca jfs: validate AG parameters in dbMount() to prevent crashes
9c18ea7ffee0 bcachefs: bch2_get_random_u64_below()
23aab037106d ocfs2: fix UBSAN warning in ocfs2_verify_volume()
7063b80268e2 jfs: Fix shift-out-of-bounds in dbDiscardAG
525b861a0081 fs/jfs: Add check for negative db_l2nbperpage
fad376fce0af fs/jfs: fix shift exponent db_agl2size negative
ebeccaaef67a nilfs2: fix shift-out-of-bounds due to too large exponent of block size
]
|
| 33/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 29434
output: 22
thoughts: 43
Thoughts: Okay, here's my interpretation of those specific identifiers as a seasoned expert.
**Initial Assessment: Identifier Scrutiny**
Alright, let's zero in on these identifiers: `ebeccaaef67a`, `7063b80268e2`, and `cce219b203c4`. Immediately, my mind starts to race through potential contexts. These sequences, assuming they're hexadecimal, could represent a plethora of things – object IDs in a database, hash values, memory addresses, transaction identifiers, version numbers, or even parts of larger code strings. The length is pretty standard for many common uses, but the specifics require deeper investigation. I need to know the origin and context to give them any real meaning. Are they related? Part of a broader system? Without that, all I can do is speculate based on patterns. I'm already mentally running through potential data structures where these might be found. Are we talking about a simple key-value store, a complex graph database, or something completely different? Further details are essential to get a good understanding.
|
| 34/4 |
2026/08/26 17:49 |
tool |
git-show |
0m
Args:
Results: map[Output:commit ebeccaaef67a4895d2496ab8d9c2fb8d89201211
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Thu Oct 27 13:43:06 2022 +0900
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
If field s_log_block_size of superblock data is corrupted and too large,
init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds
warning followed by a kernel panic (if panic_on_warn is set):
shift exponent 38973 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
ubsan_epilogue+0xb/0x50
__ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
init_nilfs.cold.11+0x18/0x1d [nilfs2]
nilfs_mount+0x9b5/0x12b0 [nilfs2]
...
This fixes the issue by adding and using a new helper function for getting
block size with sanity check.
Link: https://lkml.kernel.org/r/20221027044306.42774-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index d588816fdf2f..20ff02b4ef5d 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -193,6 +193,34 @@ static int nilfs_store_log_cursor(struct the_nilfs *nilfs,
return ret;
}
+/**
+ * nilfs_get_blocksize - get block size from raw superblock data
+ * @sb: super block instance
+ * @sbp: superblock raw data buffer
+ * @blocksize: place to store block size
+ *
+ * nilfs_get_blocksize() calculates the block size from the block size
+ * exponent information written in @sbp and stores it in @blocksize,
+ * or aborts with an error message if it's too large.
+ *
+ * Return Value: On success, 0 is returned. If the block size is too
+ * large, -EINVAL is returned.
+ */
+static int nilfs_get_blocksize(struct super_block *sb,
+ struct nilfs_super_block *sbp, int *blocksize)
+{
+ unsigned int shift_bits = le32_to_cpu(sbp->s_log_block_size);
+
+ if (unlikely(shift_bits >
+ ilog2(NILFS_MAX_BLOCK_SIZE) - BLOCK_SIZE_BITS)) {
+ nilfs_err(sb, "too large filesystem blocksize: 2 ^ %u KiB",
+ shift_bits);
+ return -EINVAL;
+ }
+ *blocksize = BLOCK_SIZE << shift_bits;
+ return 0;
+}
+
/**
* load_nilfs - load and recover the nilfs
* @nilfs: the_nilfs structure to be released
@@ -246,11 +274,15 @@ int load_nilfs(struct the_nilfs *nilfs, struct super_block *sb)
nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
/* verify consistency between two super blocks */
- blocksize = BLOCK_SIZE << le32_to_cpu(sbp[0]->s_log_block_size);
+ err = nilfs_get_blocksize(sb, sbp[0], &blocksize);
+ if (err)
+ goto scan_error;
+
if (blocksize != nilfs->ns_blocksize) {
nilfs_warn(sb,
"blocksize differs between two super blocks (%d != %d)",
blocksize, nilfs->ns_blocksize);
+ err = -EINVAL;
goto scan_error;
}
@@ -609,9 +641,11 @@ int init_nilfs(struct the_nilfs *nilfs, struct super_block *sb, char *data)
if (err)
goto failed_sbh;
- blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
- if (blocksize < NILFS_MIN_BLOCK_SIZE ||
- blocksize > NILFS_MAX_BLOCK_SIZE) {
+ err = nilfs_get_blocksize(sb, sbp, &blocksize);
+ if (err)
+ goto failed_sbh;
+
+ if (blocksize < NILFS_MIN_BLOCK_SIZE) {
nilfs_err(sb,
"couldn't mount because of unsupported filesystem blocksize %d",
blocksize);
]
|
| 35/4 |
2026/08/26 17:49 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 31161
output: 28
thoughts: 1121
Thoughts: **Analyzing Bitwise Shifts and Safe Power-of-Two Checks in C**
Okay, so I'm diving into this bitwise shift scenario where we're evaluating `(1 << shift) == value` in C, with `shift` coming from disk as a `u32`. My immediate concern is undefined behavior, particularly when `shift` is 32 or greater. It's a classic pitfall.
Firstly, shifting a signed `int` (like `1`) by 31 or more bits is undefined in C. Shifting into the sign bit or beyond the bit width is a no-no. Even using `1U << shift` or a `BIT()` macro doesn't save us if `shift` is 32 or greater. The C99 standard is pretty clear on this: the right operand can't be greater than or equal to the width of the left operand. UBSan will flag it as `shift-out-of-bounds` in GCC/Clang which is useful.
Now, here's where it gets interesting because the result of the undefined behavior can depend on the architecture. On x86, the shift count is masked, so `1 << 32` effectively becomes `1 << 0`, leading to incorrect results, like a false positive where `(1 << 32) == 1` evaluates to true! Other architectures might produce 0 or some other unexpected value. This is a very subtle and dangerous bug.
To ensure safety, my primary method is to short-circuit with a range check *before* the shift: `shift < 32 && (1U << shift) == value`. This prevents the shift if `shift` is out of bounds. The `&&` short-circuit evaluation guarantees that if `shift` is 32 or greater, the right side is never even evaluated. Mathmatically, if `shift >= 32`, then the left side is always larger than the 32-bit `value`, so it can never be equal, so it's logically correct to return false when `shift >= 32`. I'm using `1U` to avoid potential signed integer overflow issues if `shift` is 31.
Then, there are the alternative methods. I can reverse the comparison, working with `value`. If `value != 0 && is_power_of_2(value) && ilog2(value) == shift` I should be safe. This relies on knowing if a value is a power of 2, and extracting the log base 2 of the value. If `value == (1U << shift)`, `value` must be a power of 2, and `shift` must be its log2. That translates to `is_power_of_2(value) && ffs(value) - 1 == shift`. Also, casting `value` to a 64-bit integer might be useful. `shift < 32 && (1ULL << shift) == value` might work, or `(u64)value == (shift < 64 ? (1ULL << shift) : 0)`.
A key point to note here is that even with 64-bit operations, the out-of-bounds check on `shift` is still critical, because `1ULL << 64` is still undefined. I'm going to look through the kernel code to check for nuance or other appropriate macros that I might be able to use. I need to be sure that I didn't miss something.
|
| 36/4 |
2026/08/26 17:49 |
tool |
grepper |
0m
Error:
Args: map[Expression:shift < 32 && \(1U? << shift\) ==]
Results:
|
| 37/4 |
2026/08/26 17:50 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33083
output: 25
thoughts: 28
Thoughts: Here's a summary of my thought process, as requested:
**Diving into the Kernel's Bit Operations**
Okay, so I need to understand exactly how the `BIT()` macro is implemented. I know it's a fundamental bit-manipulation function used extensively within the kernel, so I need to be precise about its behavior. My focus is going to be on the actual implementation, and any differences or nuances between the standard library version and the vDSO version, if there is one. First things first, I'm going to track down the header files. I'll start with the standard locations: `include/linux/bits.h` and then drill down into `include/vdso/bits.h`, to compare their definitions. I'm expecting some pretty straightforward bit shifting, but I want to be certain about the details.
|
| 38/4 |
2026/08/26 17:50 |
tool |
grepper |
0m
Args: map[Expression:#define BIT\( PathPrefix:include]
Results: map[Output:include/vdso/bits.h-6-
include/vdso/bits.h:7:#define BIT(nr) (UL(1) << (nr))
include/vdso/bits.h-8-#define BIT_ULL(nr) (ULL(1) << (nr))
]
|
| 39/4 |
2026/08/26 17:50 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33394
output: 35
thoughts: 36
Thoughts: Okay, let's dive into this. Here's how I'd approach that particular line of inquiry, framed as my own thought process:
**Diving into the Power-of-Two and Log2 Utilities in Linux**
Right, so I'm curious about the low-level implementation of `is_power_of_2` and `ilog2` functions. These are fundamental utilities, and understanding how the kernel handles them can give me insights into performance optimizations and bitwise trickery. My immediate thought is to go straight to the source, the definitive answer lies in the kernel headers. Specifically, `include/linux/log2.h` is where these should reside. I expect to find some clever bit manipulation, probably relying on properties of binary representations to achieve efficient implementations. It’s likely there will be inline assembly if they're particularly performance-critical. I'm eager to see if there are any subtle nuances in the logic, or any platform-specific optimizations depending on the target architecture. This investigation will probably spark some thought about how these functions fit into larger data structures or algorithms in the kernel.
|
| 40/4 |
2026/08/26 17:50 |
tool |
grepper |
0m
Args: map[Expression:is_power_of_2 PathPrefix:include/linux/log2.h]
Results: map[Output:include/linux/log2.h=30=int __ilog2_u64(u64 n)
--
include/linux/log2.h-36-/**
include/linux/log2.h:37: * is_power_of_2() - check if a value is a power of two
include/linux/log2.h-38- * @n: the value to check
--
include/linux/log2.h=44=static __always_inline __attribute__((const))
include/linux/log2.h:45:bool is_power_of_2(unsigned long n)
include/linux/log2.h-46-{
--
include/linux/log2.h=226=int __bits_per(unsigned long n)
--
include/linux/log2.h-229- return 1;
include/linux/log2.h:230: if (is_power_of_2(n))
include/linux/log2.h-231- return order_base_2(n) + 1;
]
|
| 41/4 |
2026/08/26 17:50 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33972
output: 35
thoughts: 38
Thoughts: Here's my take on those lines of code, presented as a personal thought process:
**Diving into `log2.h` for Bitwise Operations**
Alright, let's pull up `/include/linux/log2.h` and focus on lines 35 to 70-ish. My goal here is to refresh my memory on the implementations of `is_power_of_2` and `ilog2`. I know these are fundamental for many optimizations and data structure implementations, especially in the kernel, so seeing how the core library handles them is a good exercise. I'm expecting some clever bitwise tricks, as usual for this type of problem. It's almost guaranteed to be efficient; after all, performance is paramount here! I'm curious to see if there's any use of compiler built-ins or architecture-specific instructions, as well. Let's see what gems we can find in these lines.
|
| 42/4 |
2026/08/26 17:50 |
tool |
read-file |
0m
Args: map[File:include/linux/log2.h FirstLine:35 LineCount:40]
Results: map[Contents: 35:
36: /**
37: * is_power_of_2() - check if a value is a power of two
38: * @n: the value to check
39: *
40: * Determine whether some value is a power of two, where zero is
41: * *not* considered a power of two.
42: * Return: true if @n is a power of 2, otherwise false.
43: */
44: static __always_inline __attribute__((const))
45: bool is_power_of_2(unsigned long n)
46: {
47: return n - 1 < (n ^ (n - 1));
48: }
49:
50: /**
51: * __roundup_pow_of_two() - round up to nearest power of two
52: * @n: value to round up
53: */
54: static inline __attribute__((const))
55: unsigned long __roundup_pow_of_two(unsigned long n)
56: {
57: return 1UL << fls_long(n - 1);
58: }
59:
60: /**
61: * __rounddown_pow_of_two() - round down to nearest power of two
62: * @n: value to round down
63: */
64: static inline __attribute__((const))
65: unsigned long __rounddown_pow_of_two(unsigned long n)
66: {
67: return 1UL << (fls_long(n) - 1);
68: }
69:
70: /**
71: * const_ilog2 - log base 2 of 32-bit or a 64-bit constant unsigned value
72: * @n: parameter
73: *
74: * Use this where sparse expects a true constant expression, e.g. for array
]
|
| 43/4 |
2026/08/26 17:50 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 34800
output: 837
thoughts: 1692
Thoughts: **Analyzing the Risks and Safe Checks for Bit-Shifting Disk Data**
Okay, so I'm diving into the problem of safely checking if a bit shift operation on data read from disk is valid, specifically when dealing with `u32` values for both the shift amount and the result. My goal is to prevent undefined behavior and ensure reliable comparisons.
First, I need to pinpoint the potential pitfalls. The core issue revolves around the `(1 << shift) == value` construct. I know that in C, any `shift` value of 32 or greater is a major red flag, triggering undefined behavior because it exceeds the bit width of the operand. This can manifest in several ways: compilers might optimize the shift in an unexpected way, or the hardware, like x86, might mask the shift count (`shift & 31`), essentially turning `1 << 32` into `1 << 0`, leading to incorrect results and false positives. I need to be absolutely certain to handle all the edge cases correctly. Additionally, the literal `1` is a signed integer, so when `shift` is 31, I'm potentially looking at signed integer overflow. This is a problem, because it’s also undefined behavior.
Now, for a safe approach, the idiomatic way is pretty clear to me. I'd go with the direct guard:
```c
shift < 32 && (1U << shift) == value
```
or using a `BIT()` macro:
```c
shift < 32 && BIT(shift) == value
```
Here's why this works: Because `shift` is a `u32`, I can be sure that the value is always greater than or equal to zero, so checking `shift < 32` is sufficient. This acts as a bounds check and prevents any shift operation with an out-of-bounds `shift` value. The short-circuit evaluation of the `&&` operator is key. If `shift` is 32 or more, the second part of the condition `(1U << shift) == value` is never even evaluated, completely avoiding the undefined behavior. The `1U` ensures unsigned operations, preventing signed overflow when `shift` is 31. This is mathematically sound, too, because any power of 2 greater than $2^{31}$ (the maximum value of `u32`), cannot be expressed as a 32-bit unsigned integer, so there's no way it could equal `value`.
There's an alternative approach, one that avoids bit shifting completely. I could use:
```c
is_power_of_2(value) && ilog2(value) == shift
```
This strategy is pretty clever. It begins by checking whether `value` is a power of 2. If it is, then `ilog2(value)` returns the position of the set bit, which is equivalent to `shift`. This avoids the shift operation entirely, and therefore, the undefined behavior. The caveat here is ensuring that `value` isn't zero, since `ilog2(0)` is undefined. The `is_power_of_2()` function ensures this isn't called.
Finally, because I work on a lot of file system code and disk format parsing, there is a third, more context-specific check. Often, `shift` represents things like block size bits or cluster size bits. In these scenarios, there are defined limits based on the format. So, a disk-specific best practice would be to include bounds checks:
```c
shift >= MIN_SHIFT && shift <= MAX_SHIFT && (1U << shift) == value
```
This is common practice and ensures that the shift value falls within a valid domain.
In essence, these are the safe ways to approach this. I've covered the hazards, provided safe solutions, and considered alternative approaches with the goal of ensuring reliable code without any unexpected issues.
|
| 44/4 |
2026/08/26 17:50 |
tool |
set-results |
0m
Args: map[Answer:To safely check if `(1 << shift) == value` when `shift` and `value` are both untrusted `u32` integers read from disk, use:
```c
shift < 32 && (1U << shift) == value
```
*(or using the kernel macro: `shift < 32 && BIT(shift) == value`)*
---
### Why the Original Code `(1 << shift) == value` is Unsafe
1. **Undefined Behavior (Shift Out-of-Bounds):**
In C (C99 §6.5.7), shifting by an amount greater than or equal to the width of the left operand is undefined behavior (UB). If `shift >= 32`, UBSan (`CONFIG_UBSAN`) will trigger a `shift-out-of-bounds` warning/kernel panic (e.g., `UBSAN: shift exponent ... is too large for 32-bit type`).
2. **CPU Architecture Masking Quirks:**
On architectures like x86, shift instructions (e.g. `shl`) mask the shift count using the lower 5 bits (`shift & 31`). As a result, `1 << 32` behaves as `1 << 0 == 1`. If `shift == 32` and `value == 1`, the expression would incorrectly evaluate to `true` even though $2^{32} \ne 1$.
3. **Signed Integer Overflow:**
The integer constant `1` has type `int` (signed 32-bit). If `shift == 31`, `1 << 31` shifts into the sign bit, which causes signed integer overflow (UB in C99/C11).
---
### Key Components of the Safe Fix
1. **Unsigned Shift Guard (`shift < 32`):**
Because `shift` is `u32` (unsigned), `shift < 32` ensures $0 \le \text{shift} \le 31$.
2. **Short-Circuit Evaluation (`&&`):**
C guarantees short-circuiting: if `shift >= 32`, the right-hand shift operation `(1U << shift)` is never executed.
3. **Unsigned Literal (`1U` / `BIT()`):**
Using `1U` (or `BIT(shift)`) prevents signed overflow at `shift == 31`.
4. **Mathematical Correctness:**
Since `value` is a 32-bit unsigned integer (maximum $2^{32}-1$), $2^{\text{shift}}$ can never equal `value` when $\text{shift} \ge 32$. Hence, returning `false` for `shift >= 32` is always correct.
---
### Alternative Safe Approaches
#### 1. Checking Power of Two and Using `ilog2()` (Avoids Shifting)
If you prefer not to perform shifts, you can check `value` using Linux kernel helpers:
```c
is_power_of_2(value) && ilog2(value) == shift
```
*(Note: `is_power_of_2()` ensures `value != 0` before calling `ilog2()`)*.
#### 2. Domain-Specific Superblock Validation
When parsing disk formats (e.g. filesystem block/cluster size bits), validate against the valid supported range (such as minimum 512 bytes / $2^9$ and maximum page size or 64 KiB / $2^{16}$):
```c
if (shift < 9 || shift > 16)
return -EINVAL;
if ((1U << shift) != value)
return -EINVAL;
```]
Results: map[Answer:To safely check if `(1 << shift) == value` when `shift` and `value` are both untrusted `u32` integers read from disk, use:
```c
shift < 32 && (1U << shift) == value
```
*(or using the kernel macro: `shift < 32 && BIT(shift) == value`)*
---
### Why the Original Code `(1 << shift) == value` is Unsafe
1. **Undefined Behavior (Shift Out-of-Bounds):**
In C (C99 §6.5.7), shifting by an amount greater than or equal to the width of the left operand is undefined behavior (UB). If `shift >= 32`, UBSan (`CONFIG_UBSAN`) will trigger a `shift-out-of-bounds` warning/kernel panic (e.g., `UBSAN: shift exponent ... is too large for 32-bit type`).
2. **CPU Architecture Masking Quirks:**
On architectures like x86, shift instructions (e.g. `shl`) mask the shift count using the lower 5 bits (`shift & 31`). As a result, `1 << 32` behaves as `1 << 0 == 1`. If `shift == 32` and `value == 1`, the expression would incorrectly evaluate to `true` even though $2^{32} \ne 1$.
3. **Signed Integer Overflow:**
The integer constant `1` has type `int` (signed 32-bit). If `shift == 31`, `1 << 31` shifts into the sign bit, which causes signed integer overflow (UB in C99/C11).
---
### Key Components of the Safe Fix
1. **Unsigned Shift Guard (`shift < 32`):**
Because `shift` is `u32` (unsigned), `shift < 32` ensures $0 \le \text{shift} \le 31$.
2. **Short-Circuit Evaluation (`&&`):**
C guarantees short-circuiting: if `shift >= 32`, the right-hand shift operation `(1U << shift)` is never executed.
3. **Unsigned Literal (`1U` / `BIT()`):**
Using `1U` (or `BIT(shift)`) prevents signed overflow at `shift == 31`.
4. **Mathematical Correctness:**
Since `value` is a 32-bit unsigned integer (maximum $2^{32}-1$), $2^{\text{shift}}$ can never equal `value` when $\text{shift} \ge 32$. Hence, returning `false` for `shift >= 32` is always correct.
---
### Alternative Safe Approaches
#### 1. Checking Power of Two and Using `ilog2()` (Avoids Shifting)
If you prefer not to perform shifts, you can check `value` using Linux kernel helpers:
```c
is_power_of_2(value) && ilog2(value) == shift
```
*(Note: `is_power_of_2()` ensures `value != 0` before calling `ilog2()`)*.
#### 2. Domain-Specific Superblock Validation
When parsing disk formats (e.g. filesystem block/cluster size bits), validate against the valid supported range (such as minimum 512 bytes / $2^9$ and maximum page size or 64 KiB / $2^{16}$):
```c
if (shift < 9 || shift > 16)
return -EINVAL;
if ((1U << shift) != value)
return -EINVAL;
```]
|
| 45/2 |
2026/08/26 17:50 |
llm |
debugger |
0m
Model:
Tokens:
input: 19386
output: 27
thoughts: 474
Thoughts: **Refining Block and Allocation Group Shift Checks**
Okay, so I'm looking at these checks for `befs_sb->block_shift` and `befs_sb->ag_shift`. Currently, we're doing the power-of-two check like this:
```c
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
// ... error ...
}
```
and for `ag_shift` like this:
```c
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
// ... error ...
```
But wait a minute... we already validated that `befs_sb->block_size` is one of 1024, 2048, 4096, or 8192 – so it *has* to be a power of 2. That means calculating the base-2 logarithm (`ilog2`) is perfectly safe. And, it's a cleaner way to express the check, avoiding the potential for overflow issues with the bit-shift operation. So I can replace the check for block shift with a simpler one:
```c
if (befs_sb->block_shift != ilog2(befs_sb->block_size)) {
```
or potentially:
```c
if (befs_sb->block_shift < 32 && (1U << befs_sb->block_shift) == befs_sb->block_size)
```
The `ilog2` approach is definitely cleaner. So I'll go with that.
For `ag_shift`, it looks like the existing check is:
```c
if (befs_sb->ag_shift >= 32 || (1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
// ... error ...
```
I'll check if `ilog2` is available in the `fs/befs/super.c` file and, if so, I can adapt the same approach here as well to maintain consistency. This would probably improve readability.
|
| 46/2 |
2026/08/26 17:50 |
tool |
grepper |
0m
Error:
Args: map[Expression:ilog2 PathPrefix:fs/befs/]
Results:
|
| 47/2 |
2026/08/26 17:50 |
llm |
debugger |
0m
Model:
Tokens:
input: 20379
output: 30
thoughts: 30
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Investigating the Absence of `ilog2` in `fs/befs/`**
Hmm, there's no `ilog2` function defined within the `fs/befs/` directory. That's a bit odd. I was expecting it to be available for integer base-2 logarithm calculations, which can be pretty common in file system operations, especially when dealing with block sizes, inode calculations, and potentially allocation strategies.
Alright, before I start down the path of implementing something myself or assuming a broader dependency, let's just confirm the obvious: is the standard Linux header, `linux/log2.h`, actually included in this source file or any of its dependencies? It’s more than likely it's handled there already. If not, then we have a potential problem we need to fix.
|
| 48/2 |
2026/08/26 17:50 |
tool |
grepper |
0m
Args: map[Expression:#include PathPrefix:fs/befs/super.c]
Results: map[Output:fs/befs/super.c-9-
fs/befs/super.c:10:#include <linux/fs.h>
fs/befs/super.c:11:#include <asm/page.h> /* for PAGE_SIZE */
fs/befs/super.c-12-
fs/befs/super.c:13:#include "befs.h"
fs/befs/super.c:14:#include "super.h"
fs/befs/super.c-15-
]
|
| 49/2 |
2026/08/26 17:50 |
llm |
debugger |
0m
Model:
Tokens:
input: 20764
output: 32
thoughts: 308
Thoughts: **Refining the Block Size Check**
Okay, so I'm looking at this block size check and thinking we can improve it. Initially, I considered just using `ilog2` by including `<linux/log2.h>`, or even just bit-shifting with `(1U << shift)` and a `< 32` check to avoid undefined behavior with a 32-bit unsigned integer. However, I remembered that `befs_sb->block_shift` is a `u32`, so a simple left shift could cause problems.
Then I realized that we could modify the current check, the original code being `if ((1 << befs_sb->block_shift) != befs_sb->block_size)`. I could change it to:
```c
if (befs_sb->block_shift >= 32 || (1U << befs_sb->block_shift) != befs_sb->block_size) {
```
That would handle the bit-shift overflow scenario. But wait... since we already know the accepted `block_size` values are limited to 1024, 2048, 4096, or 8192, a much cleaner approach might be to use `ilog2` directly, and check if `ilog2(befs_sb->block_size) != befs_sb->block_shift`. This feels more elegant, but I need to quickly check if `ilog2` is available without explicitly including `<linux/log2.h>`. Perhaps `<linux/fs.h>` already includes it. I need to verify that `ilog2` is functional first before making any changes.
|
| 50/2 |
2026/08/26 17:50 |
tool |
codeexpert |
1m
Args: map[Question:Is `ilog2` available in `fs/befs/super.c`?]
Results: map[Answer:Yes, `ilog2` is available in `fs/befs/super.c`.
It is made available via header inclusions:
1. `fs/befs/super.c` directly includes `<asm/page.h>` and `<linux/fs.h>`.
2. Architecture `<asm/page.h>` includes `<asm-generic/getorder.h>`.
3. `<asm-generic/getorder.h>` includes `<linux/log2.h>`, which defines the `ilog2` macro.
4. Additionally, `<linux/fs.h>` includes `<linux/slab.h>` -> `<linux/gfp.h>` -> `<linux/mmzone.h>` -> `<asm/page.h>` -> `<asm-generic/getorder.h>` -> `<linux/log2.h>`.]
|
| 51/3 |
2026/08/26 17:50 |
agent |
codeexpert |
1m
Model:
Results: map[Answer:Yes, `ilog2` is available in `fs/befs/super.c`.
It is made available via header inclusions:
1. `fs/befs/super.c` directly includes `<asm/page.h>` and `<linux/fs.h>`.
2. Architecture `<asm/page.h>` includes `<asm-generic/getorder.h>`.
3. `<asm-generic/getorder.h>` includes `<linux/log2.h>`, which defines the `ilog2` macro.
4. Additionally, `<linux/fs.h>` includes `<linux/slab.h>` -> `<linux/gfp.h>` -> `<linux/mmzone.h>` -> `<asm/page.h>` -> `<asm-generic/getorder.h>` -> `<linux/log2.h>`.]
Instruction:
You are a capable Linux kernel developer tasked with researching complex questions
about kernel source code. You will be given a concrete question, and need to provide
a concrete answer.
Use tools extensively while researching the question. Don't make assumptions,
or rely on your previous knowledge about the kernel source code, use available tools
to access the actual source code.
Use all available sources of information:
- kernel source code
- documentation in the Documentation dir in the source tree
- git commits descriptions, git blame
Do not guess file names or file paths and attempt to read them without
verifying their existence first using content search or directory listing tools.
If a file, symbol, or directory is not found via content search (grepper) or
directory listing (codesearch-dir-index), treat it as completely absent.
Do not attempt to guess alternative names, extensions, or directories.
Tool Selection Guidelines:
1. For C functions, structs, and variables: Prefer codesearch-definition-source
or codesearch-struct-layout FIRST to retrieve clean, exact definitions
without line-number guessing.
2. If symbol lookup fails (e.g., preprocessor macros, macro-generated code, or
disabled #ifdef branches), fall back to read-file or grepper.
3. For file headers, #include directives, preprocessor macro definitions, and
non-C files (Kconfig, Makefiles, docs): Use read-file or grepper directly.
Do NOT use git-log to search for the presence or existence of files in the
repository. git-log is only for tracing commit history of files that are
already present in the current checkout. If a file does not exist in the
current checkout, it cannot be used for reproduction.
Avoid running broad git-log queries (such as searches on the entire repo)
without a specific 'PathPrefix' to restrict the scope, as these are very
expensive and will time out.
If a git-log tool call times out, do not retry the query with the same broad
scope. You must specify a tighter, narrower 'PathPrefix' for subsequent queries.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Is `ilog2` available in `fs/befs/super.c`?
|
| 52/4 |
2026/08/26 17:50 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 3975
output: 34
thoughts: 141
Thoughts: **Checking for `ilog2` in `fs/befs/super.c`**
Okay, so the user's asking about `ilog2` in `fs/befs/super.c`. My first move is to verify its presence. I need to determine if it's directly included, defined, or used within that specific file. My approach will be methodical. I'll start by reading the file, or using some tooling like `read-file` to get a quick overview of the contents. Then, I can use a `grepper` utility or the equivalent to quickly search for `ilog2`. This will tell me definitively if the function is directly available within the context of `fs/befs/super.c`, or if it's brought in through an included header. From there, I can determine the best approach based on the tools that can be used.
|
| 53/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:1 LineCount:50]
Results: map[Contents: 1: /*
2: * super.c
3: *
4: * Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
5: *
6: * Licensed under the GNU GPL. See the file COPYING for details.
7: *
8: */
9:
10: #include <linux/fs.h>
11: #include <asm/page.h> /* for PAGE_SIZE */
12:
13: #include "befs.h"
14: #include "super.h"
15:
16: /*
17: * befs_load_sb -- Read from disk and properly byteswap all the fields
18: * of the befs superblock
19: */
20: int
21: befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
22: {
23: struct befs_sb_info *befs_sb = BEFS_SB(sb);
24:
25: /* Check the byte order of the filesystem */
26: if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_LE)
27: befs_sb->byte_order = BEFS_BYTESEX_LE;
28: else if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_BE)
29: befs_sb->byte_order = BEFS_BYTESEX_BE;
30:
31: befs_sb->magic1 = fs32_to_cpu(sb, disk_sb->magic1);
32: befs_sb->magic2 = fs32_to_cpu(sb, disk_sb->magic2);
33: befs_sb->magic3 = fs32_to_cpu(sb, disk_sb->magic3);
34: befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
36: befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
37: befs_sb->used_blocks = fs64_to_cpu(sb, disk_sb->used_blocks);
38: befs_sb->inode_size = fs32_to_cpu(sb, disk_sb->inode_size);
39:
40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
42: befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
43:
44: befs_sb->flags = fs32_to_cpu(sb, disk_sb->flags);
45:
46: befs_sb->log_blocks = fsrun_to_cpu(sb, disk_sb->log_blocks);
47: befs_sb->log_start = fs64_to_cpu(sb, disk_sb->log_start);
48: befs_sb->log_end = fs64_to_cpu(sb, disk_sb->log_end);
49:
50: befs_sb->root_dir = fsrun_to_cpu(sb, disk_sb->root_dir);
]
|
| 54/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 5317
output: 36
thoughts: 17
Thoughts: Okay, here we go...
**Diving into `fs/befs/super.c`**
Alright, time to dig into the `super.c` file within the BEFS filesystem implementation. I need to get a solid grasp of how the superblock is handled – that's the central piece that holds all the essential metadata for the filesystem. I'm thinking about how the code initializes the superblock, loads it from disk during mount, and how it handles any updates or modifications. I'm specifically looking for the functions responsible for reading and writing the superblock data structures, and how they interact with the underlying block device. I also need to understand how the BEFS-specific data structures are utilized here - I'm very interested in seeing how BEFS differentiates itself here, so I'm keen to pay attention to the specific structures being used. I will be looking out for any error handling, and making sure that I understand the various locking mechanisms used to ensure data integrity during superblock operations, especially across concurrent access. Finally, I'll be keeping an eye out for any optimizations or performance considerations the developers have implemented in the file.
|
| 55/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:51 LineCount:100]
Results: map[Contents: 51: befs_sb->indices = fsrun_to_cpu(sb, disk_sb->indices);
52: befs_sb->nls = NULL;
53:
54: return BEFS_OK;
55: }
56:
57: int
58: befs_check_sb(struct super_block *sb)
59: {
60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
61:
62: /* Check magic headers of super block */
63: if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
64: || (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
65: || (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
66: befs_error(sb, "invalid magic header");
67: return BEFS_ERR;
68: }
69:
70: /*
71: * Check blocksize of BEFS.
72: *
73: * Blocksize of BEFS is 1024, 2048, 4096 or 8192.
74: */
75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 56/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 6649
output: 31
thoughts: 125
Thoughts: **Analyzing the BEFS Superblock Code**
Okay, so I'm diving into `fs/befs/super.c`. First things first, I need to understand its dependencies. It pulls in `linux/fs.h`, `asm/page.h`, `befs.h`, and `super.h`. Right, let's start by digging into `befs.h` and `super.h`, and anything they themselves bring in, to get a handle on the data structures and definitions this file is working with.
I'm specifically interested in how the code uses `ilog2`. I want to figure out where that comes from and how it's being used within the context of the BEFS superblock. Let's see if it's defined in the kernel's headers. I'll need to check the relevant include paths. I'll either grep for `ilog2` within the `include/` directory or take a look at `linux/log2.h` directly to see if that's where it's defined and included.
|
| 57/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Args: map[Expression:#define ilog2|ilog2\( PathPrefix:include/]
Results: map[Output:include/asm-generic/div64.h-80- /* determine MSB of b */ \
include/asm-generic/div64.h:81: ___p = 1 << ilog2(___b); \
include/asm-generic/div64.h-82- \
--
include/asm-generic/div64.h=174=extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
--
include/asm-generic/div64.h-186- __rem = (n) & (__base - 1); \
include/asm-generic/div64.h:187: (n) >>= ilog2(__base); \
include/asm-generic/div64.h-188- } else if (__builtin_constant_p(__base) && \
--
include/asm-generic/getorder.h=29=static __always_inline __attribute_const__ int get_order(unsigned long size)
--
include/asm-generic/getorder.h-37-
include/asm-generic/getorder.h:38: return ilog2((size) - 1) - PAGE_SHIFT + 1;
include/asm-generic/getorder.h-39- }
--
include/linux/assoc_array_priv.h-18-#define ASSOC_ARRAY_FAN_MASK (ASSOC_ARRAY_FAN_OUT - 1)
include/linux/assoc_array_priv.h:19:#define ASSOC_ARRAY_LEVEL_STEP (ilog2(ASSOC_ARRAY_FAN_OUT))
include/linux/assoc_array_priv.h-20-#define ASSOC_ARRAY_LEVEL_STEP_MASK (ASSOC_ARRAY_LEVEL_STEP - 1)
include/linux/assoc_array_priv.h-21-#define ASSOC_ARRAY_KEY_CHUNK_MASK (ASSOC_ARRAY_KEY_CHUNK_SIZE - 1)
include/linux/assoc_array_priv.h:22:#define ASSOC_ARRAY_KEY_CHUNK_SHIFT (ilog2(BITS_PER_LONG))
include/linux/assoc_array_priv.h-23-
--
include/linux/assoc_array_priv.h=28=struct assoc_array_ptr;
--
include/linux/assoc_array_priv.h-46- * The tree is navigated by constructing an index key consisting of an array of
include/linux/assoc_array_priv.h:47: * segments, where each segment is ilog2(ASSOC_ARRAY_FAN_OUT) bits in size.
include/linux/assoc_array_priv.h-48- *
--
include/linux/average.h-56- unsigned long internal = READ_ONCE(e->internal); \
include/linux/average.h:57: unsigned long weight_rcp = ilog2(_weight_rcp); \
include/linux/average.h-58- unsigned long precision = _precision; \
--
include/linux/backing-dev-defs.h=32=enum wb_stat_item {
--
include/linux/backing-dev-defs.h-40-
include/linux/backing-dev-defs.h:41:#define WB_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
include/linux/backing-dev-defs.h-42-
--
include/linux/blkdev.h=758=static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
--
include/linux/blkdev.h-761- return 0;
include/linux/blkdev.h:762: return sector >> ilog2(disk->queue->limits.chunk_sectors);
include/linux/blkdev.h-763-}
--
include/linux/blockgroup_lock.h-13-#ifdef CONFIG_SMP
include/linux/blockgroup_lock.h:14:#define NR_BG_LOCKS (4 << ilog2(NR_CPUS < 32 ? NR_CPUS : 32))
include/linux/blockgroup_lock.h-15-#else
--
include/linux/fsl_ifc.h-68-#define IFC_AMASK(n) (IFC_AMASK_MASK << \
include/linux/fsl_ifc.h:69: (__ilog2(n) - IFC_AMASK_SHIFT))
include/linux/fsl_ifc.h-70-
--
include/linux/fsl_ifc.h-109-#define CSOR_NAND_PB_SHIFT 8
include/linux/fsl_ifc.h:110:#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT)
include/linux/fsl_ifc.h-111-/* Time for Read Enable High to Output High Impedance */
--
include/linux/fsl_ifc.h-162-#define CSOR_GPCM_GPTO_SHIFT 24
include/linux/fsl_ifc.h:163:#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT)
include/linux/fsl_ifc.h-164-/* GPCM External Access Termination mode for read access */
--
include/linux/fsl_ifc.h=352=enum ifc_nand_fir_opcodes {
--
include/linux/fsl_ifc.h-534-#define IFC_NAND_NCR_FTOCNT_SHIFT 25
include/linux/fsl_ifc.h:535:#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT)
include/linux/fsl_ifc.h-536-
--
include/linux/fsl_ifc.h-617-#define IFC_NORCR_STOCNT_SHIFT 16
include/linux/fsl_ifc.h:618:#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT)
include/linux/fsl_ifc.h-619-
--
include/linux/generic-radix-tree.h=47=struct genradix_root;
--
include/linux/generic-radix-tree.h-52-#define GENRADIX_ARY (GENRADIX_NODE_SIZE / sizeof(struct genradix_node *))
include/linux/generic-radix-tree.h:53:#define GENRADIX_ARY_SHIFT ilog2(GENRADIX_ARY)
include/linux/generic-radix-tree.h-54-
--
include/linux/generic-radix-tree.h=185=static inline void *__genradix_ptr_inlined(struct __genradix *radix, size_t offset)
--
include/linux/generic-radix-tree.h-191-
include/linux/generic-radix-tree.h:192: if (unlikely(ilog2(offset) >= genradix_depth_shift(level)))
include/linux/generic-radix-tree.h-193- return NULL;
--
include/linux/hashtable.h-27-#define HASH_SIZE(name) (ARRAY_SIZE(name))
include/linux/hashtable.h:28:#define HASH_BITS(name) ilog2(HASH_SIZE(name))
include/linux/hashtable.h-29-
--
include/linux/huge_mm.h=154=struct mthp_stat {
include/linux/huge_mm.h:155: unsigned long stats[ilog2(MAX_PTRS_PER_PTE) + 1][__MTHP_STAT_COUNT];
include/linux/huge_mm.h-156-};
--
include/linux/kernfs.h=37=struct kernfs_iattrs;
--
include/linux/kernfs.h-63-#ifdef CONFIG_SMP
include/linux/kernfs.h:64:#define NR_KERNFS_LOCK_BITS (2 * (ilog2(NR_CPUS < 32 ? NR_CPUS : 32)))
include/linux/kernfs.h-65-#else
--
include/linux/kho/abi/kexec_handover.h=259=enum kho_radix_consts {
--
include/linux/kho/abi/kexec_handover.h-266- /* Size of the table in kho_radix_node, in log2 */
include/linux/kho/abi/kexec_handover.h:267: KHO_TABLE_SIZE_LOG2 = const_ilog2(PAGE_SIZE / sizeof(phys_addr_t)),
include/linux/kho/abi/kexec_handover.h-268-
include/linux/kho/abi/kexec_handover.h-269- /* Number of bits in the kho_radix_leaf bitmap, in log2 */
include/linux/kho/abi/kexec_handover.h:270: KHO_BITMAP_SIZE_LOG2 = PAGE_SHIFT + const_ilog2(BITS_PER_BYTE),
include/linux/kho/abi/kexec_handover.h-271-
--
include/linux/log2.h=65=unsigned long __rounddown_pow_of_two(unsigned long n)
--
include/linux/log2.h-76- */
include/linux/log2.h:77:#define const_ilog2(n) \
include/linux/log2.h-78-( \
--
include/linux/log2.h-155- */
include/linux/log2.h:156:#define ilog2(n) \
include/linux/log2.h-157-( \
--
include/linux/log2.h-177- ((n) == 1) ? 1 : \
include/linux/log2.h:178: (1UL << (ilog2((n) - 1) + 1)) \
include/linux/log2.h-179- ) : \
--
include/linux/log2.h-193- __builtin_constant_p(n) ? ( \
include/linux/log2.h:194: (1UL << ilog2(n))) : \
include/linux/log2.h-195- __rounddown_pow_of_two(n) \
--
include/linux/log2.h=199=int __order_base_2(unsigned long n)
include/linux/log2.h-200-{
include/linux/log2.h:201: return n > 1 ? ilog2(n - 1) + 1 : 0;
include/linux/log2.h-202-}
--
include/linux/log2.h-220- ((n) == 0 || (n) == 1) ? 0 : \
include/linux/log2.h:221: ilog2((n) - 1) + 1) : \
include/linux/log2.h-222- __order_base_2(n) \
--
include/linux/log2.h=226=int __bits_per(unsigned long n)
--
include/linux/log2.h-253- ((n) == 0 || (n) == 1) \
include/linux/log2.h:254: ? 1 : ilog2(n) + 1 \
include/linux/log2.h-255- ) : \
--
include/linux/mm.h=2393=static inline void vma_set_access_pid_bit(struct vm_area_struct *vma)
--
include/linux/mm.h-2396-
include/linux/mm.h:2397: pid_bit = hash_32(current->pid, ilog2(BITS_PER_LONG));
include/linux/mm.h-2398- if (vma->numab_state && !test_bit(pid_bit, &vma->numab_state->pids_active[1])) {
--
include/linux/mmzone.h-84-#ifdef CONFIG_64BIT
include/linux/mmzone.h:85:#define MAX_FOLIO_ORDER (ilog2(SZ_16G) - PAGE_SHIFT)
include/linux/mmzone.h-86-#else
include/linux/mmzone.h:87:#define MAX_FOLIO_ORDER (ilog2(SZ_1G) - PAGE_SHIFT)
include/linux/mmzone.h-88-#endif
--
include/linux/mmzone.h-113- */
include/linux/mmzone.h:114:#define VMEMMAP_TAIL_MIN_ORDER (ilog2(2 * PAGE_SIZE / sizeof(struct page)))
include/linux/mmzone.h-115-#define __NR_VMEMMAP_TAILS (MAX_FOLIO_ORDER - VMEMMAP_TAIL_MIN_ORDER + 1)
--
include/linux/pagemap.h=722=static inline unsigned int filemap_get_order(size_t size)
include/linux/pagemap.h-723-{
include/linux/pagemap.h:724: unsigned int shift = ilog2(size);
include/linux/pagemap.h-725-
--
include/linux/sbitmap.h=341=static inline int sbitmap_calculate_shift(unsigned int depth)
include/linux/sbitmap.h-342-{
include/linux/sbitmap.h:343: int shift = ilog2(BITS_PER_LONG);
include/linux/sbitmap.h-344-
--
include/linux/slab.h=604=static inline bool kmem_dump_obj(void *object) { return false; }
--
include/linux/slab.h-621-#define KMALLOC_MIN_SIZE ARCH_KMALLOC_MINALIGN
include/linux/slab.h:622:#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE)
include/linux/slab.h-623-#endif
--
include/linux/slab.h=750=static __always_inline enum kmalloc_cache_type kmalloc_type(gfp_t flags, kmalloc_token_t token)
--
include/linux/slab.h-759- return KMALLOC_PARTITION_START + hash_64(token.v ^ random_kmalloc_seed,
include/linux/slab.h:760: ilog2(KMALLOC_PARTITION_CACHES_NR + 1));
include/linux/slab.h-761-#elif defined(CONFIG_KMALLOC_PARTITION_TYPED)
--
include/linux/t10-pi.h=29=static inline u64 full_pi_ref_tag(const struct request *rq)
include/linux/t10-pi.h-30-{
include/linux/t10-pi.h:31: unsigned int shift = ilog2(queue_logical_block_size(rq->q));
include/linux/t10-pi.h-32-
--
include/linux/usb/composite.h-54-
include/linux/usb/composite.h:55:#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1)
include/linux/usb/composite.h-56-struct usb_configuration;
--
include/linux/userfaultfd_k.h=123=enum mfill_atomic_mode {
--
include/linux/userfaultfd_k.h-130-
include/linux/userfaultfd_k.h:131:#define MFILL_ATOMIC_MODE_BITS (const_ilog2(NR_MFILL_ATOMIC_MODES - 1) + 1)
include/linux/userfaultfd_k.h-132-#define MFILL_ATOMIC_BIT(nr) BIT(MFILL_ATOMIC_MODE_BITS + (nr))
--
include/net/rps-types.h-5-/* Define a rps_tag_ptr:
include/net/rps-types.h:6: * Low order 5 bits are used to store the ilog2(size) of an RPS table.
include/net/rps-types.h-7- */
--
include/net/tcp.h=1652=static inline unsigned long tcp_probe0_when(const struct sock *sk,
--
include/net/tcp.h-1654-{
include/net/tcp.h:1655: u8 backoff = min_t(u8, ilog2(TCP_RTO_MAX / TCP_RTO_MIN) + 1,
include/net/tcp.h-1656- inet_csk(sk)->icsk_backoff);
--
include/scsi/scsi_cmnd.h=228=static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
include/scsi/scsi_cmnd.h-229-{
include/scsi/scsi_cmnd.h:230: unsigned int shift = ilog2(scmd->device->sector_size) - SECTOR_SHIFT;
include/scsi/scsi_cmnd.h-231-
--
include/scsi/scsi_cmnd.h=235=static inline unsigned int scsi_logical_block_count(struct scsi_cmnd *scmd)
include/scsi/scsi_cmnd.h-236-{
include/scsi/scsi_cmnd.h:237: unsigned int shift = ilog2(scmd->device->sector_size);
include/scsi/scsi_cmnd.h-238-
--
include/scsi/scsi_cmnd.h=383=static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd)
--
include/scsi/scsi_cmnd.h-388- if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI)
include/scsi/scsi_cmnd.h:389: xfer_len += (xfer_len >> ilog2(prot_interval)) * 8;
include/scsi/scsi_cmnd.h-390-
]
|
| 58/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 11694
output: 35
thoughts: 29
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Diving into the BEFS Files**
Alright, time to get my hands dirty. I need to understand what's being pulled in by those BEFS header files. Specifically, I'm thinking about `fs/befs/befs.h` and `fs/befs/super.h`. What kind of foundational structures and definitions are we working with? I want to see what those include files import. Are we talking core BEFS structures, definitions for the superblock, maybe some fundamental data types, or potentially some utility functions? I need to build a mental map of the dependencies and key building blocks here before I can really dig into any deeper analysis of the BEFS implementation. It's time to build a solid framework to explore these concepts.
|
| 59/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:1 LineCount:50]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * befs.h
4: *
5: * Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
6: * Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
7: */
8:
9: #ifndef _LINUX_BEFS_H
10: #define _LINUX_BEFS_H
11:
12: #include "befs_fs_types.h"
13:
14: /* used in debug.c */
15: #define BEFS_VERSION "0.9.3"
16:
17:
18: typedef u64 befs_blocknr_t;
19: /*
20: * BeFS in memory structures
21: */
22:
23: struct befs_mount_options {
24: kgid_t gid;
25: kuid_t uid;
26: int use_gid;
27: int use_uid;
28: int debug;
29: char *iocharset;
30: };
31:
32: struct befs_sb_info {
33: u32 magic1;
34: u32 block_size;
35: u32 block_shift;
36: int byte_order;
37: befs_off_t num_blocks;
38: befs_off_t used_blocks;
39: u32 inode_size;
40: u32 magic2;
41:
42: /* Allocation group information */
43: u32 blocks_per_ag;
44: u32 ag_shift;
45: u32 num_ags;
46:
47: /* State of the superblock */
48: u32 flags;
49:
50: /* Journal log entry */
]
|
| 60/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 12537
output: 39
thoughts: 20
Thoughts: Okay, let's dive in. Here's my thought process on this:
**Initial Investigation into File System Types**
Right, so to get a handle on this, my first instinct is to go directly to the source. I'm thinking, where are the fundamental definitions likely to reside? Given my experience, I'm betting the core structure definitions are in `befs_fs_types.h` and the super block definitions in `super.h`. Those headers should contain the nitty-gritty details of how file system types are represented and handled at the lower levels. I want to check those first, before I go digging elsewhere. Understanding the basics in `befs_fs_types.h` and the superblock definition (`super.h`) is crucial before I can form an informed opinion.
|
| 61/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:1 LineCount:50]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * fs/befs/befs_fs_types.h
4: *
5: * Copyright (C) 2001 Will Dyson (will@cs.earlham.edu)
6: *
7: *
8: *
9: * from linux/include/linux/befs_fs.h
10: *
11: * Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
12: *
13: */
14:
15: #ifndef _LINUX_BEFS_FS_TYPES
16: #define _LINUX_BEFS_FS_TYPES
17:
18: #ifdef __KERNEL__
19: #include <linux/types.h>
20: #endif /*__KERNEL__*/
21:
22: #define PACKED __attribute__ ((__packed__))
23:
24: /*
25: * Max name lengths of BFS
26: */
27:
28: #define BEFS_NAME_LEN 255
29:
30: #define BEFS_SYMLINK_LEN 144
31: #define BEFS_NUM_DIRECT_BLOCKS 12
32: #define B_OS_NAME_LENGTH 32
33:
34: /* The datastream blocks mapped by the double-indirect
35: * block are always 4 fs blocks long.
36: * This eliminates the need for linear searches among
37: * the potentially huge number of indirect blocks
38: *
39: * Err. Should that be 4 fs blocks or 4k???
40: * It matters on large blocksize volumes
41: */
42: #define BEFS_DBLINDIR_BRUN_LEN 4
43:
44: /*
45: * Flags of superblock
46: */
47:
48: enum super_flags {
49: BEFS_BYTESEX_BE,
50: BEFS_BYTESEX_LE,
]
|
| 62/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 13392
output: 34
thoughts: 14
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into the BEFS Superblock**
Okay, time to get to the heart of the matter. Let's start digging into the BEFS file system. My first port of call will be `fs/befs/super.h`. That's where I'll find the core data structure: the superblock. I need to refresh my memory on the layout – the crucial information about the file system itself. Things like the magic number, the block size, the free block lists, the inode allocation bitmaps... All the critical parameters that define how this BEFS implementation is put together are in there. I'll need to double check the offsets and data types, to make sure I understand how to interpret this super block, to properly understand how this is all implemented.
|
| 63/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.h FirstLine:1 LineCount:50]
Results: map[Contents: 1: /*
2: * super.h
3: */
4:
5: int befs_load_sb(struct super_block *sb, befs_super_block *disk_sb);
6: int befs_check_sb(struct super_block *sb);
]
|
| 64/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 13708
output: 31
thoughts: 100
Thoughts: **Investigating Log2 Inclusion in Linux Filesystem Headers**
Okay, so I need to understand how `log2` functionality is being used, or if it's even directly included, within the filesystem code. My immediate thought is to start with the most likely entry point: `linux/fs.h`. Let's dig into that header file. I need to quickly determine whether `linux/fs.h` includes `linux/log2.h` directly, or perhaps indirectly through another included header. To efficiently confirm this I'll need to explore the file or if it includes anything that includes `linux/log2.h`. A quick `grep` for "log2.h" within `include/linux/fs.h` is the fastest way to get a clear answer. This will tell me right away if there's any direct or indirect involvement.
|
| 65/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Error:
Args: map[Expression:log2\.h PathPrefix:include/linux/fs.h]
Results:
|
| 66/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 14034
output: 33
thoughts: 30
Thoughts: Here's my thinking process:
**Diving into the Filesystem Headers**
Okay, so I need to understand the dependencies of `linux/fs.h`. That's where I need to start. My initial approach is to check what this file includes, so I'll be reading the contents of `include/linux/fs.h`. This will give me a clear picture of what other header files are essential for this particular filesystem component. From here, I can trace dependencies, understand data structures, and get a better grip on the overall architecture.
|
| 67/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/fs.h FirstLine:1 LineCount:80]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef _LINUX_FS_H
3: #define _LINUX_FS_H
4:
5: #include <linux/fs/super.h>
6: #include <linux/vfsdebug.h>
7: #include <linux/linkage.h>
8: #include <linux/wait_bit.h>
9: #include <linux/kdev_t.h>
10: #include <linux/dcache.h>
11: #include <linux/path.h>
12: #include <linux/stat.h>
13: #include <linux/cache.h>
14: #include <linux/list.h>
15: #include <linux/llist.h>
16: #include <linux/radix-tree.h>
17: #include <linux/xarray.h>
18: #include <linux/rbtree.h>
19: #include <linux/init.h>
20: #include <linux/pid.h>
21: #include <linux/bug.h>
22: #include <linux/mutex.h>
23: #include <linux/rwsem.h>
24: #include <linux/mm_types.h>
25: #include <linux/capability.h>
26: #include <linux/semaphore.h>
27: #include <linux/fcntl.h>
28: #include <linux/rculist_bl.h>
29: #include <linux/atomic.h>
30: #include <linux/shrinker.h>
31: #include <linux/migrate_mode.h>
32: #include <linux/uidgid.h>
33: #include <linux/lockdep.h>
34: #include <linux/percpu-rwsem.h>
35: #include <linux/workqueue.h>
36: #include <linux/delayed_call.h>
37: #include <linux/uuid.h>
38: #include <linux/errseq.h>
39: #include <linux/ioprio.h>
40: #include <linux/build_bug.h>
41: #include <linux/stddef.h>
42: #include <linux/mount.h>
43: #include <linux/cred.h>
44: #include <linux/mnt_idmapping.h>
45: #include <linux/slab.h>
46: #include <linux/maple_tree.h>
47: #include <linux/rw_hint.h>
48: #include <linux/file_ref.h>
49: #include <linux/unicode.h>
50:
51: #include <asm/byteorder.h>
52: #include <uapi/linux/fs.h>
53:
54: struct bdi_writeback;
55: struct bio;
56: struct io_comp_batch;
57: struct fiemap_extent_info;
58: struct kiocb;
59: struct kobject;
60: struct pipe_inode_info;
61: struct poll_table_struct;
62: struct kstatfs;
63: struct vm_area_struct;
64: struct vfsmount;
65: struct cred;
66: struct swap_info_struct;
67: struct seq_file;
68: struct iov_iter;
69: struct fsnotify_mark_connector;
70: struct fs_context;
71: struct fs_parameter_spec;
72: struct file_kattr;
73: struct iomap_ops;
74: struct delegated_inode;
75:
76: extern void __init inode_init(void);
77: extern void __init inode_init_early(void);
78: extern void __init files_init(void);
79: extern void __init files_maxfiles_init(void);
80:
]
|
| 68/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 15375
output: 32
thoughts: 113
Thoughts: **Investigating the Dependency Chain of `linux/log2.h`**
Okay, so I was just looking at `include/linux/fs.h`, specifically line 45 where it includes `<linux/slab.h>`. That got me thinking – a common pattern in the kernel is for headers to indirectly pull in other frequently used headers. Now I'm curious about the dependency chain for `linux/log2.h`. Does `linux/slab.h` directly include it? Or is it brought in transitively through things like `linux/radix-tree.h`, `linux/xarray.h`, `linux/maple_tree.h`, or even through other included headers within `<linux/slab.h>` itself? I need to clarify this. I'm going to determine which headers actually include `linux/log2.h` to fully understand the scope of its usage and potential impact of any changes to it.
|
| 69/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Args: map[Expression:#include <linux/log2\.h> PathPrefix:include/]
Results: map[Output:include/asm-generic/div64.h-54-
include/asm-generic/div64.h:55:#include <linux/log2.h>
include/asm-generic/div64.h-56-
--
include/asm-generic/getorder.h-7-#include <linux/compiler.h>
include/asm-generic/getorder.h:8:#include <linux/log2.h>
include/asm-generic/getorder.h-9-
--
include/linux/average.h-6-#include <linux/compiler.h>
include/linux/average.h:7:#include <linux/log2.h>
include/linux/average.h-8-
--
include/linux/generic-radix-tree.h-41-#include <linux/limits.h>
include/linux/generic-radix-tree.h:42:#include <linux/log2.h>
include/linux/generic-radix-tree.h-43-#include <linux/math.h>
--
include/linux/iommu-helper.h-5-#include <linux/bug.h>
include/linux/iommu-helper.h:6:#include <linux/log2.h>
include/linux/iommu-helper.h-7-#include <linux/math.h>
--
include/linux/kernel.h-24-#include <linux/kstrtox.h>
include/linux/kernel.h:25:#include <linux/log2.h>
include/linux/kernel.h-26-#include <linux/math.h>
--
include/linux/kho/abi/kexec_handover.h-13-#include <linux/bits.h>
include/linux/kho/abi/kexec_handover.h:14:#include <linux/log2.h>
include/linux/kho/abi/kexec_handover.h-15-#include <linux/math.h>
--
include/linux/page_frag_cache.h-6-#include <linux/bits.h>
include/linux/page_frag_cache.h:7:#include <linux/log2.h>
include/linux/page_frag_cache.h-8-#include <linux/mm_types_task.h>
--
include/linux/sbitmap.h-15-#include <linux/list.h>
include/linux/sbitmap.h:16:#include <linux/log2.h>
include/linux/sbitmap.h-17-#include <linux/minmax.h>
--
include/linux/usb/composite.h-28-#include <linux/usb/webusb.h>
include/linux/usb/composite.h:29:#include <linux/log2.h>
include/linux/usb/composite.h-30-#include <linux/configfs.h>
--
include/sound/soc.h-18-#include <linux/lockdep.h>
include/sound/soc.h:19:#include <linux/log2.h>
include/sound/soc.h-20-#include <linux/mutex.h>
]
|
| 70/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 16483
output: 37
thoughts: 244
Thoughts: **Investigating the Prevalence of `linux/log2.h`**
Okay, so I've stumbled across a bit of a pattern here. Line 25 of `include/linux/kernel.h`, line 55 of `include/asm-generic/div64.h`, and line 8 of `include/asm-generic/getorder.h` all include `<linux/log2.h>`. Hmm, that seems... relevant. I need to figure out the scope of this. What other files are including either of those three files to get to `log2.h`? I need to track down the dependency tree.
Wait, looking at `fs/befs/super.c`, I see a different set of includes: `<asm/page.h>`, `<linux/fs.h>`, `"befs.h"`, and `"super.h"`. Okay, so, where do *those* files sit in relation to `log2.h`? I need to trace the connections and understand the full inclusion graph.
Right, so, I need to check `include/asm-generic/page.h`, or potentially `arch/*/include/asm/page.h` based on the architecture. Also, `befs.h` and `fs.h` are on the list to explore. This could be interesting. Let's see if either `page.h`, `fs.h` or, better yet, `befs.h` are including `<linux/log2.h>`.
A more systematic approach might be needed here, since I could be missing a key link. Let's read `fs/befs/befs.h` directly to get a complete view of its includes. That should give me a good picture of the dependency chain within that specific module and hopefully clarify the relationship with `log2.h`.
|
| 71/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:51 LineCount:100]
Results: map[Contents: 51: befs_block_run log_blocks;
52: befs_off_t log_start;
53: befs_off_t log_end;
54:
55: befs_inode_addr root_dir;
56: befs_inode_addr indices;
57: u32 magic3;
58:
59: struct befs_mount_options mount_opts;
60: struct nls_table *nls;
61: };
62:
63: struct befs_inode_info {
64: u32 i_flags;
65: u32 i_type;
66:
67: befs_inode_addr i_inode_num;
68: befs_inode_addr i_parent;
69: befs_inode_addr i_attribute;
70:
71: union {
72: befs_data_stream ds;
73: char symlink[BEFS_SYMLINK_LEN];
74: } i_data;
75:
76: struct inode vfs_inode;
77: };
78:
79: enum befs_err {
80: BEFS_OK,
81: BEFS_ERR,
82: BEFS_BAD_INODE,
83: BEFS_BT_END,
84: BEFS_BT_EMPTY,
85: BEFS_BT_MATCH,
86: BEFS_BT_OVERFLOW,
87: BEFS_BT_NOT_FOUND
88: };
89:
90:
91: /****************************/
92: /* debug.c */
93: __printf(2, 3)
94: void befs_error(const struct super_block *sb, const char *fmt, ...);
95: __printf(2, 3)
96: void befs_warning(const struct super_block *sb, const char *fmt, ...);
97: __printf(2, 3)
98: void befs_debug(const struct super_block *sb, const char *fmt, ...);
99:
100: void befs_dump_super_block(const struct super_block *sb, befs_super_block *);
101: void befs_dump_inode(const struct super_block *sb, befs_inode *);
102: void befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super *);
103: void befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead *);
104: /****************************/
105:
106:
107: /* Gets a pointer to the private portion of the super_block
108: * structure from the public part
109: */
110: static inline struct befs_sb_info *
111: BEFS_SB(const struct super_block *super)
112: {
113: return (struct befs_sb_info *) super->s_fs_info;
114: }
115:
116: static inline struct befs_inode_info *
117: BEFS_I(const struct inode *inode)
118: {
119: return container_of(inode, struct befs_inode_info, vfs_inode);
120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
145: return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
146: }
147:
148: #include "endian.h"
149:
150: #endif /* _LINUX_BEFS_H */
]
|
| 72/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 18585
output: 47
thoughts: 211
Thoughts: **Investigating Kernel Header Dependencies**
Okay, so I need to trace some header file dependencies within the kernel source. My immediate thought is to start with some key files: `include/linux/bug.h`, `include/linux/list.h`, `include/linux/slab.h`, and `include/linux/fs.h`. I need to understand what these include, and if they have any potential to cause circular dependencies.
A crucial question pops up: Does `linux/fs.h` directly include `linux/kernel.h`? That's a primary concern. I need to know if this direct inclusion exists, which is the most obvious source of potential issues.
To answer that, I'll take a slightly broader approach. Instead of just `fs.h`, I need to check if *any* of the headers that `fs.h` includes transitively brings in `kernel.h` or, for that matter, `log2.h`. A good way to do this is to check the headers `fs.h` depends on.
So, let's fire up a `grep` command. I'll search for `kernel\.h` in `include/linux/fs.h` and *any* of the headers that *it* includes.
I'll also keep a mental list of other files I should be checking in more detail, such as `include/linux/list.h`, `include/linux/rbtree.h`, `include/linux/radix-tree.h`, `include/linux/slab.h`, `include/linux/mutex.h`, and others.
Alright, let's zoom in on `slab.h`. Does `slab.h` include `kernel.h`? Time to take a look at the file `include/linux/slab.h` itself. I need to be sure.
|
| 73/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Error:
Args: map[Expression:#include <linux/kernel\.h>|#include <linux/log2\.h> PathPrefix:include/linux/slab.h]
Results:
|
| 74/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 19254
output: 33
thoughts: 111
Thoughts: **Investigating the Source of `ilog2` in `slab.h`**
Okay, hold on a second. I'm seeing `ilog2` in `slab.h`, which is a bit unexpected. I was just reviewing some `grep` results and saw it used in a couple of places: `KMALLOC_SHIFT_LOW` and within that line involving `KMALLOC_PARTITION_CACHES_NR`. That's a classic sign of needing to track down a dependency. I need to figure out where `slab.h` is getting its definition of `ilog2`. The logical next step is to examine the include statements within `slab.h`. Let's see what headers it pulls in. I need to trace this dependency back to its origin. Time to see what the header dependencies are.
|
| 75/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/slab.h FirstLine:1 LineCount:50]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
4: *
5: * (C) SGI 2006, Christoph Lameter
6: * Cleaned up and restructured to ease the addition of alternative
7: * implementations of SLAB allocators.
8: * (C) Linux Foundation 2008-2013
9: * Unified interface for all slab allocators
10: */
11:
12: #ifndef _LINUX_SLAB_H
13: #define _LINUX_SLAB_H
14:
15: #include <linux/bug.h>
16: #include <linux/cache.h>
17: #include <linux/gfp.h>
18: #include <linux/overflow.h>
19: #include <linux/types.h>
20: #include <linux/rcupdate.h>
21: #include <linux/workqueue.h>
22: #include <linux/percpu-refcount.h>
23: #include <linux/cleanup.h>
24: #include <linux/hash.h>
25:
26: enum _slab_flag_bits {
27: _SLAB_CONSISTENCY_CHECKS,
28: _SLAB_RED_ZONE,
29: _SLAB_POISON,
30: _SLAB_KMALLOC,
31: _SLAB_HWCACHE_ALIGN,
32: _SLAB_CACHE_DMA,
33: _SLAB_CACHE_DMA32,
34: _SLAB_STORE_USER,
35: _SLAB_PANIC,
36: _SLAB_TYPESAFE_BY_RCU,
37: _SLAB_TRACE,
38: #ifdef CONFIG_DEBUG_OBJECTS
39: _SLAB_DEBUG_OBJECTS,
40: #endif
41: _SLAB_NOLEAKTRACE,
42: _SLAB_NO_MERGE,
43: #ifdef CONFIG_FAILSLAB
44: _SLAB_FAILSLAB,
45: #endif
46: #ifdef CONFIG_MEMCG
47: _SLAB_ACCOUNT,
48: #endif
49: #ifdef CONFIG_KASAN_GENERIC
50: _SLAB_KASAN,
]
|
| 76/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 20283
output: 34
thoughts: 48
Thoughts: Okay, here's my take on those initial thoughts, rendered as a first-person summary, keeping in mind my own expertise:
**Diving into Core Kernel Headers**
Right, let's get down to brass tacks. I need to refresh my understanding (or maybe just get a fresh perspective) on some fundamental kernel mechanisms. My immediate inclination is to revisit some essential header files: `linux/gfp.h`, `linux/hash.h`, `linux/overflow.h`, and `linux/rcupdate.h`. Each of these represents a critical area in the kernel, and a refresher is always useful.
Hmm, I think `linux/gfp.h` is where I'll start. It's probably the most fundamental of the bunch for memory management, and I need to solidify my knowledge of the memory allocation flags again. It is one of those that I have always looked at when trying to understand something deeply.
|
| 77/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/gfp.h FirstLine:1 LineCount:20]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef __LINUX_GFP_H
3: #define __LINUX_GFP_H
4:
5: #include <linux/gfp_types.h>
6:
7: #include <linux/mmzone.h>
8: #include <linux/topology.h>
9: #include <linux/alloc_tag.h>
10: #include <linux/cleanup.h>
11: #include <linux/sched.h>
12:
13: struct vm_area_struct;
14: struct mempolicy;
15:
16: /* Helper macro to avoid gfp flags if they are the default one */
17: #define __default_gfp(a,b,...) b
18: #define default_gfp(...) __default_gfp(,##__VA_ARGS__,GFP_KERNEL)
19:
20: /* Convert GFP flags to their corresponding migrate type */
]
|
| 78/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 20850
output: 34
thoughts: 41
Thoughts: Okay, let's dive into this. Here's how I'd approach this task, as if these were my internal thoughts:
**Navigating the Kernel's Memory Landscape**
Alright, I need to understand this memory management concept better. Where do I even begin? Okay, first instinct is to zero in on the core data structures and definitions. Considering the nature of the problem, I'll likely find the relevant information in the headers. My first thoughts are that the memory zones themselves will be defined in `linux/mmzone.h`, though topology might influence this as well so let's keep `linux/topology.h` in mind, and the scheduler could also play a part so perhaps even `linux/sched.h` might be relevant. Let's start with `linux/mmzone.h` first; I'll get a better grasp on the fundamental building blocks of memory management from there.
|
| 79/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/mmzone.h FirstLine:1 LineCount:30]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef _LINUX_MMZONE_H
3: #define _LINUX_MMZONE_H
4:
5: #ifndef __ASSEMBLY__
6: #ifndef __GENERATING_BOUNDS_H
7:
8: #include <linux/spinlock.h>
9: #include <linux/list.h>
10: #include <linux/list_nulls.h>
11: #include <linux/wait.h>
12: #include <linux/bitops.h>
13: #include <linux/cache.h>
14: #include <linux/threads.h>
15: #include <linux/numa.h>
16: #include <linux/init.h>
17: #include <linux/seqlock.h>
18: #include <linux/nodemask.h>
19: #include <linux/pageblock-flags.h>
20: #include <linux/page-flags-layout.h>
21: #include <linux/atomic.h>
22: #include <linux/mm_types.h>
23: #include <linux/page-flags.h>
24: #include <linux/local_lock.h>
25: #include <linux/zswap.h>
26: #include <linux/sizes.h>
27: #include <asm/page.h>
28:
29: /* Free memory management - zoned buddy allocator. */
30: #ifndef CONFIG_ARCH_FORCE_MAX_ORDER
]
|
| 80/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 21576
output: 34
thoughts: 12
Thoughts: Here's my take on the thought process, as if it were my own:
**Diving into the Bit Operations**
Okay, so I need to understand this bit manipulation issue better. Where do I even begin? Right, let's start with the basics, the bedrock of bitwise operations in the kernel. `linux/bitops.h`. That's the go-to place for all the fundamental bit-level functions, the core building blocks. It’s where I should be able to find everything I need on the standard kernel implementations. Time to crack open that header and see what gems it holds.
|
| 81/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/bitops.h FirstLine:1 LineCount:40]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef _LINUX_BITOPS_H
3: #define _LINUX_BITOPS_H
4:
5: #include <asm/types.h>
6: #include <linux/bits.h>
7: #include <linux/typecheck.h>
8:
9: #include <uapi/linux/kernel.h>
10:
11: #define BITS_TO_LONGS(nr) __KERNEL_DIV_ROUND_UP(nr, BITS_PER_TYPE(long))
12: #define BITS_TO_U64(nr) __KERNEL_DIV_ROUND_UP(nr, BITS_PER_TYPE(u64))
13: #define BITS_TO_U32(nr) __KERNEL_DIV_ROUND_UP(nr, BITS_PER_TYPE(u32))
14: #define BITS_TO_BYTES(nr) __KERNEL_DIV_ROUND_UP(nr, BITS_PER_TYPE(char))
15:
16: #define BYTES_TO_BITS(nb) ((nb) * BITS_PER_BYTE)
17:
18: extern unsigned int __sw_hweight8(unsigned int w);
19: extern unsigned int __sw_hweight16(unsigned int w);
20: extern unsigned int __sw_hweight32(unsigned int w);
21: extern unsigned long __sw_hweight64(__u64 w);
22:
23: /*
24: * Defined here because those may be needed by architecture-specific static
25: * inlines.
26: */
27:
28: #include <asm-generic/bitops/generic-non-atomic.h>
29:
30: /*
31: * Many architecture-specific non-atomic bitops contain inline asm code and due
32: * to that the compiler can't optimize them to compile-time expressions or
33: * constants. In contrary, generic_*() helpers are defined in pure C and
34: * compilers optimize them just well.
35: * Therefore, to make `unsigned long foo = 0; __set_bit(BAR, &foo)` effectively
36: * equal to `unsigned long foo = BIT(BAR)`, pick the generic C alternative when
37: * the arguments can be resolved at compile time. That expression itself is a
38: * constant and doesn't bring any functional changes to the rest of cases.
39: * The casts to `uintptr_t` are needed to mitigate `-Waddress` warnings when
40: * passing a bitmap from .bss or .data (-> `!!addr` is always true).
]
|
| 82/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 22494
output: 26
thoughts: 383
Thoughts: **Investigating the Kernel's Log2 Implementation**
Okay, so I'm digging into how `linux/log2.h` is brought into the fold within the kernel's include structure. First, I need to see *how* it's included within its own directory - a bit of self-reference there, probably for internal use or modularity. Next, I need to understand what's *in* `linux/log2.h` itself and get a lay of the land for its overall usage throughout the kernel's headers.
Alright, I ran a quick check for where this header is included across the *entire* `include/` directory. That produced a list: `include/asm-generic/div64.h`, `include/asm-generic/getorder.h`, `include/linux/average.h`, and several others. Okay, that list gives me a good starting point. Now, to investigate further, I need to understand *why* those files include `log2.h` and what they are trying to achieve.
My next step is to examine how `asm/page.h`, `asm-generic/page.h` or `asm-generic/getorder.h` handles this, or, perhaps, whether they include `linux/log2.h`. For example, `fs/befs/super.c` includes `<asm/page.h>`, which looks interesting. Knowing what `<asm/page.h>` depends on should be revealing. If not, I'll search for uses of `<asm-generic/getorder.h>` or `<asm/page.h>` to get a better sense of how log2 is being integrated.
|
| 83/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Args: map[Expression:getorder\.h PathPrefix:arch/]
Results: map[Output:arch/alpha/include/asm/page.h=60=typedef struct page *pgtable_t;
--
arch/alpha/include/asm/page.h-84-#include <asm-generic/memory_model.h>
arch/alpha/include/asm/page.h:85:#include <asm-generic/getorder.h>
arch/alpha/include/asm/page.h-86-
--
arch/arc/include/asm/page.h=125=static inline unsigned long virt_to_pfn(const void *kaddr)
--
arch/arc/include/asm/page.h-138-#include <asm-generic/memory_model.h> /* page_to_pfn, pfn_to_page */
arch/arc/include/asm/page.h:139:#include <asm-generic/getorder.h>
arch/arc/include/asm/page.h-140-
--
arch/arm/include/asm/page.h=179=extern int pfn_valid(unsigned long);
--
arch/arm/include/asm/page.h-188-
arch/arm/include/asm/page.h:189:#include <asm-generic/getorder.h>
arch/arm/include/asm/page.h-190-#include <asm-generic/memory_model.h>
--
arch/arm64/include/asm/page.h=43=int pfn_is_map_memory(unsigned long pfn);
--
arch/arm64/include/asm/page.h-55-
arch/arm64/include/asm/page.h:56:#include <asm-generic/getorder.h>
arch/arm64/include/asm/page.h-57-
--
arch/csky/include/asm/page.h=73=static inline unsigned long virt_to_pfn(const void *kaddr)
--
arch/csky/include/asm/page.h-84-#include <asm-generic/memory_model.h>
arch/csky/include/asm/page.h:85:#include <asm-generic/getorder.h>
arch/csky/include/asm/page.h-86-
--
arch/hexagon/include/asm/page.h=118=static inline unsigned long virt_to_pfn(const void *kaddr)
--
arch/hexagon/include/asm/page.h-127-/* XXX Todo: implement assembly-optimized version of getorder. */
arch/hexagon/include/asm/page.h:128:#include <asm-generic/getorder.h>
arch/hexagon/include/asm/page.h-129-
--
arch/loongarch/include/asm/page.h=100=extern int __virt_addr_valid(volatile void *kaddr);
--
arch/loongarch/include/asm/page.h-105-#include <asm-generic/memory_model.h>
arch/loongarch/include/asm/page.h:106:#include <asm-generic/getorder.h>
arch/loongarch/include/asm/page.h-107-
--
arch/m68k/include/asm/page.h=49=extern unsigned long _ramend;
--
arch/m68k/include/asm/page.h-58-
arch/m68k/include/asm/page.h:59:#include <asm-generic/getorder.h>
arch/m68k/include/asm/page.h-60-#include <asm-generic/memory_model.h>
--
arch/microblaze/include/asm/page.h=125=static inline const void *pfn_to_virt(unsigned long pfn)
--
arch/microblaze/include/asm/page.h-138-#include <asm-generic/memory_model.h>
arch/microblaze/include/asm/page.h:139:#include <asm-generic/getorder.h>
arch/microblaze/include/asm/page.h-140-
--
arch/mips/include/asm/page.h=219=static inline unsigned long kaslr_offset(void)
--
arch/mips/include/asm/page.h-224-#include <asm-generic/memory_model.h>
arch/mips/include/asm/page.h:225:#include <asm-generic/getorder.h>
arch/mips/include/asm/page.h-226-
--
arch/nios2/include/asm/page.h=73=extern struct page *mem_map;
--
arch/nios2/include/asm/page.h-91-
arch/nios2/include/asm/page.h:92:#include <asm-generic/getorder.h>
arch/nios2/include/asm/page.h-93-
--
arch/openrisc/include/asm/page.h=65=static inline unsigned long virt_to_pfn(const void *kaddr)
--
arch/openrisc/include/asm/page.h-77-#include <asm-generic/memory_model.h>
arch/openrisc/include/asm/page.h:78:#include <asm-generic/getorder.h>
arch/openrisc/include/asm/page.h-79-
--
arch/parisc/include/asm/page.h=93=extern int npmem_ranges;
--
arch/parisc/include/asm/page.h-170-#include <asm-generic/memory_model.h>
arch/parisc/include/asm/page.h:171:#include <asm-generic/getorder.h>
arch/parisc/include/asm/page.h-172-#include <asm/pdc.h>
--
arch/powerpc/include/asm/page_32.h=49=extern void copy_page(void *to, void *from);
arch/powerpc/include/asm/page_32.h-50-
arch/powerpc/include/asm/page_32.h:51:#include <asm-generic/getorder.h>
arch/powerpc/include/asm/page_32.h-52-
--
arch/powerpc/include/asm/page_64.h=83=extern u64 ppc64_pft_size;
--
arch/powerpc/include/asm/page_64.h-103-
arch/powerpc/include/asm/page_64.h:104:#include <asm-generic/getorder.h>
arch/powerpc/include/asm/page_64.h-105-
--
arch/riscv/include/asm/page.h=169=static __always_inline void *pfn_to_kaddr(unsigned long pfn)
--
arch/riscv/include/asm/page.h-183-#include <asm-generic/memory_model.h>
arch/riscv/include/asm/page.h:184:#include <asm-generic/getorder.h>
arch/riscv/include/asm/page.h-185-
--
arch/s390/include/asm/page.h=268=static inline unsigned long virt_to_pfn(const void *kaddr)
--
arch/s390/include/asm/page.h-284-#include <asm-generic/memory_model.h>
arch/s390/include/asm/page.h:285:#include <asm-generic/getorder.h>
arch/s390/include/asm/page.h-286-
--
arch/sh/include/asm/page.h=84=typedef struct page *pgtable_t;
--
arch/sh/include/asm/page.h-160-#include <asm-generic/memory_model.h>
arch/sh/include/asm/page.h:161:#include <asm-generic/getorder.h>
arch/sh/include/asm/page.h-162-
--
arch/sparc/include/asm/page_32.h=122=extern unsigned long pfn_base;
--
arch/sparc/include/asm/page_32.h-135-#include <asm-generic/memory_model.h>
arch/sparc/include/asm/page_32.h:136:#include <asm-generic/getorder.h>
arch/sparc/include/asm/page_32.h-137-
--
arch/sparc/include/asm/page_64.h=130=extern unsigned long PAGE_OFFSET;
--
arch/sparc/include/asm/page_64.h-158-
arch/sparc/include/asm/page_64.h:159:#include <asm-generic/getorder.h>
arch/sparc/include/asm/page_64.h-160-
--
arch/um/include/asm/page.h=71=extern unsigned long uml_physmem;
--
arch/um/include/asm/page.h-93-#include <asm-generic/memory_model.h>
arch/um/include/asm/page.h:94:#include <asm-generic/getorder.h>
arch/um/include/asm/page.h-95-
--
arch/x86/include/asm/page.h=76=static __always_inline u64 __is_canonical_address(u64 vaddr, u8 vaddr_bits)
--
arch/x86/include/asm/page.h-83-#include <asm-generic/memory_model.h>
arch/x86/include/asm/page.h:84:#include <asm-generic/getorder.h>
arch/x86/include/asm/page.h-85-
--
arch/xtensa/include/asm/page.h=96=typedef struct page *pgtable_t;
--
arch/xtensa/include/asm/page.h-105-
arch/xtensa/include/asm/page.h:106:# include <asm-generic/getorder.h>
arch/xtensa/include/asm/page.h-107-
]
|
| 84/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 25823
output: 33
thoughts: 313
Thoughts: **Investigating the Prevalence of `ilog2` in the Kernel**
Okay, so I'm noticing a potential pattern here. It looks like every architecture's `<asm/page.h>` is including `<asm-generic/getorder.h>`. That's interesting in itself. But more importantly, line 8 of `<asm-generic/getorder.h>` explicitly includes `<linux/log2.h>`. And *that* is where `ilog2` is defined. This immediately raises a question about how widespread the dependency is and if there are other paths.
Let's dive deeper and see if we can find any other direct or indirect inclusions.
Now, let me trace a different path. Starting with `fs/befs/super.c`, I see that it includes `<linux/fs.h>`. `<linux/fs.h>` then pulls in `<linux/slab.h>`, which in turn includes `<linux/gfp.h>`. Continuing down this rabbit hole, `<linux/gfp.h>` includes `<linux/mmzone.h>`. Crucially, `<linux/mmzone.h>` then includes `<asm/page.h>`, which we know includes `<asm-generic/getorder.h>`, and *also* `<linux/sizes.h>`. So, there's another path leading to the assembly include.
Then, `<linux/fs.h>` itself branches out: it includes either `<linux/kernel.h>`, `<linux/radix-tree.h>`, `<linux/xarray.h>`, or `<linux/rbtree.h>`. Right, let's confirm whether the `<linux/kernel.h>` is being included in `<linux/fs.h>`.
And finally, if it doesn't, let's explore the others. Let me check the other possible header includes, starting with `<linux/radix-tree.h>` and then `<linux/xarray.h>`, and finally `<linux/maple_tree.h>`, to see if they end up including `<linux/kernel.h>`. I'm going to quickly grep the relevant header files for `<linux/kernel.h>` to get a quick overview of what's going on.
|
| 85/4 |
2026/08/26 17:51 |
tool |
grepper |
0m
Error:
Args: map[Expression:kernel\.h PathPrefix:include/linux/radix-tree.h]
Results:
|
| 86/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 26657
output: 36
thoughts: 18
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into the Radix Tree Header**
Okay, time to get a handle on this. Let's start with a deep dive into the `include/linux/radix-tree.h` header. Before I start debugging I need to remind myself of the fundamental pieces that comprise the radix tree. Gotta make sure I'm not missing anything obvious in the include chain, you know? A stray header could change everything. Always good practice to double-check that stuff before the nitty-gritty debugging.
|
| 87/4 |
2026/08/26 17:51 |
tool |
read-file |
0m
Args: map[File:include/linux/radix-tree.h FirstLine:1 LineCount:25]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0-or-later */
2: /*
3: * Copyright (C) 2001 Momchil Velikov
4: * Portions Copyright (C) 2001 Christoph Hellwig
5: * Copyright (C) 2006 Nick Piggin
6: * Copyright (C) 2012 Konstantin Khlebnikov
7: */
8: #ifndef _LINUX_RADIX_TREE_H
9: #define _LINUX_RADIX_TREE_H
10:
11: #include <linux/bitops.h>
12: #include <linux/gfp_types.h>
13: #include <linux/list.h>
14: #include <linux/lockdep.h>
15: #include <linux/math.h>
16: #include <linux/percpu.h>
17: #include <linux/preempt.h>
18: #include <linux/rcupdate.h>
19: #include <linux/spinlock.h>
20: #include <linux/types.h>
21: #include <linux/xarray.h>
22: #include <linux/local_lock.h>
23:
24: /* Keep unconverted code working */
25: #define radix_tree_root xarray
]
|
| 88/4 |
2026/08/26 17:51 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 27226
output: 34
thoughts: 14
Thoughts: Here's my take on the thought process, as if it were my own:
**Diving into the XArray Implementation**
Alright, time to dig into the heart of things. Let's see what's happening with the `include/linux/xarray.h` header file. This is where the core of the XArray implementation resides, and I need to refresh my understanding of its intricacies. I know this is where the fundamental data structures and key functions related to the XArray are defined. I need to refresh what's in there, and how this relates to my current problem space. I'll need to pay close attention to the data structures, specifically how they handle the hierarchy and potential optimizations used. My goal is to grasp the low-level mechanics to see how it can be adapted. Time to put on my mental hat and get to it.
|
| 89/4 |
2026/08/26 17:52 |
tool |
read-file |
0m
Args: map[File:include/linux/xarray.h FirstLine:1 LineCount:25]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0+ */
2: #ifndef _LINUX_XARRAY_H
3: #define _LINUX_XARRAY_H
4: /*
5: * eXtensible Arrays
6: * Copyright (c) 2017 Microsoft Corporation
7: * Author: Matthew Wilcox <willy@infradead.org>
8: *
9: * See Documentation/core-api/xarray.rst for how to use the XArray.
10: */
11:
12: #include <linux/bitmap.h>
13: #include <linux/bug.h>
14: #include <linux/compiler.h>
15: #include <linux/err.h>
16: #include <linux/gfp.h>
17: #include <linux/kconfig.h>
18: #include <linux/limits.h>
19: #include <linux/lockdep.h>
20: #include <linux/rcupdate.h>
21: #include <linux/sched/mm.h>
22: #include <linux/spinlock.h>
23: #include <linux/types.h>
24:
25: struct list_lru;
]
|
| 90/4 |
2026/08/26 17:52 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 27818
output: 27
thoughts: 267
Thoughts: **My Initial Exploration of `ilog2` in the Befs Filesystem**
Okay, so I'm digging into how `ilog2` is used, or *could* be used, in the Befs filesystem code. I've traced the dependencies of `include/linux/xarray.h` and see that it indirectly pulls in `include/linux/log2.h`, which is where `ilog2` is defined. That's a decent starting point. The include chain is: `xarray.h` -> `gfp.h` -> `mmzone.h` -> `asm/page.h` -> `asm-generic/getorder.h` -> `log2.h`. I've noted that `fs/befs/super.c` also includes `<asm/page.h>` directly, as well as `<linux/fs.h>`, `befs.h`, and `super.h`.
Now, the definition of `ilog2(n)` itself is interesting. It uses `__builtin_constant_p` to optimize for compile-time constants. The logic in there looks pretty standard for a fast integer base-2 logarithm, handling edge cases like negative inputs and 0. I'm familiar with this kind of bit-twiddling, of course.
The next step is to see if `ilog2` is *actually* being used within the Befs filesystem code. So, I need to do a `grep` for `ilog2` specifically in the `fs/befs/` directory. That'll quickly tell me if it's there already, and if so, how it's being employed. Let's see what that search turns up.
|
| 91/4 |
2026/08/26 17:52 |
tool |
grepper |
0m
Error:
Args: map[Expression:ilog2 PathPrefix:fs/befs/]
Results:
|
| 92/4 |
2026/08/26 17:52 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 28491
output: 22
thoughts: 30
Thoughts: Okay, here's my interpretation of those thoughts, presented as a first-person expert summary:
**File System Inspection - A Quick Check**
Alright, before I dive too deep, I need to make sure I haven't missed anything obvious. I'm going to quickly check if there are other files present in the `fs/befs/` directory. Given my experience, I know this is often the first place to look for related configuration files, potentially debug logs or cached data. It’s always good practice to get an overview before getting into the deeper analysis. I'll execute a file listing within `fs/befs/` to get a quick visual on what's available. This approach will save time by making sure that there aren't obvious clues sitting around.
|
| 93/4 |
2026/08/26 17:52 |
tool |
codesearch-dir-index |
0m
Args:
Results: map[Files:[befs.h befs_fs_types.h btree.c btree.h datastream.c datastream.h debug.c endian.h inode.c inode.h io.c io.h linuxvfs.c super.c super.h] Subdirs:<nil>]
|
| 94/4 |
2026/08/26 17:52 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 28820
output: 36
thoughts: 1054
Thoughts: **Analyzing the BEFS Superblock Check and `ilog2` Availability**
Okay, so I'm looking at `fs/befs/super.c` and specifically the `befs_check_sb` function. My first thought is to understand its role. It's essentially a sanity check for a BEFS superblock, verifying its integrity before mounting. Let's see...
I'm focused on the superblock's magic numbers, block size, block shift, and other crucial fields. The code checks for the magic numbers, making sure they match the expected BEFS values. It then validates the block size, ensuring it's one of the supported values (1024, 2048, 4096, or 8192) and doesn't exceed the system's page size. A key consistency check involves confirming that the `block_shift` and `block_size` fields are consistent with each other; their relationship needs to be internally coherent. Also, I'm noting the consistency check between `ag_shift` and `blocks_per_ag` as a non-fatal check. Finally, it makes sure the filesystem isn't dirty, meaning there are no blocks in the journal, indicating a clean shutdown. If any of these checks fail, it flags an error and refuses to mount the volume.
Now, my mind wanders to whether the `ilog2` function, which is often crucial for calculations involving powers of two, is available within this context. I need to trace the inclusion paths. Let's trace it. It seems `fs/befs/super.c` directly includes `<asm/page.h>`, which, depending on the architecture, will include `<asm-generic/getorder.h>`. That file then includes `<linux/log2.h>`. Ah, and there it is. `<linux/log2.h>` defines the `ilog2` macro. That means `ilog2` is definitely available to `fs/befs/super.c` through this path.
I also observe that the direct inclusion of `<linux/fs.h>` in `fs/befs/super.c` leads to the eventual inclusion of `<linux/log2.h>` through `<linux/slab.h>`, `<linux/gfp.h>`, `<linux/mmzone.h>` and then through `<asm/page.h>`, `<asm-generic/getorder.h>` and then finally `<linux/log2.h>`. Just for good measure, I remember that any file that includes `<linux/kernel.h>` also pulls in `<linux/log2.h>`.
Just to be safe, I'm also going to check `<linux/log2.h>` itself to look for other definitions or usage. I'll take a look at the relevant portion of the file's contents, lines 150-180, to ensure no hidden gotchas or interesting definitions I might be missing.
|
| 95/4 |
2026/08/26 17:52 |
tool |
read-file |
0m
Args: map[File:include/linux/log2.h FirstLine:150 LineCount:40]
Results: map[Contents: 150: * constant-capable log of base 2 calculation
151: * - this can be used to initialise global variables from constant data, hence
152: * the massive ternary operator construction
153: *
154: * selects the appropriately-sized optimised version depending on sizeof(n)
155: */
156: #define ilog2(n) \
157: ( \
158: __builtin_constant_p(n) ? \
159: ((n) < 2 ? 0 : \
160: 63 - __builtin_clzll(n)) : \
161: (sizeof(n) <= 4) ? \
162: __ilog2_u32(n) : \
163: __ilog2_u64(n) \
164: )
165:
166: /**
167: * roundup_pow_of_two - round the given value up to nearest power of two
168: * @n: parameter
169: *
170: * round the given value up to the nearest power of two
171: * - the result is undefined when n == 0
172: * - this can be used to initialise global variables from constant data
173: */
174: #define roundup_pow_of_two(n) \
175: ( \
176: __builtin_constant_p(n) ? ( \
177: ((n) == 1) ? 1 : \
178: (1UL << (ilog2((n) - 1) + 1)) \
179: ) : \
180: __roundup_pow_of_two(n) \
181: )
182:
183: /**
184: * rounddown_pow_of_two - round the given value down to nearest power of two
185: * @n: parameter
186: *
187: * round the given value down to the nearest power of two
188: * - the result is undefined when n == 0
189: * - this can be used to initialise global variables from constant data
]
|
| 96/4 |
2026/08/26 17:52 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 31178
output: 195
thoughts: 27
Thoughts: Here's your summary:
**The Path Forward is Verified and Clear**
Okay, everything's verified, the process is sound, and I'm feeling confident. Now's the moment to deliver the findings. Let's call `set-results`. The key here is clarity and conciseness. I need to make sure the explanation is thorough, leaving no room for ambiguity or further questions, but also direct and to the point. The goal is to provide a complete understanding quickly. It's time to set the outcome.
|
| 97/4 |
2026/08/26 17:52 |
tool |
set-results |
0m
Args: map[Answer:Yes, `ilog2` is available in `fs/befs/super.c`.
It is made available via header inclusions:
1. `fs/befs/super.c` directly includes `<asm/page.h>` and `<linux/fs.h>`.
2. Architecture `<asm/page.h>` includes `<asm-generic/getorder.h>`.
3. `<asm-generic/getorder.h>` includes `<linux/log2.h>`, which defines the `ilog2` macro.
4. Additionally, `<linux/fs.h>` includes `<linux/slab.h>` -> `<linux/gfp.h>` -> `<linux/mmzone.h>` -> `<asm/page.h>` -> `<asm-generic/getorder.h>` -> `<linux/log2.h>`.]
Results: map[Answer:Yes, `ilog2` is available in `fs/befs/super.c`.
It is made available via header inclusions:
1. `fs/befs/super.c` directly includes `<asm/page.h>` and `<linux/fs.h>`.
2. Architecture `<asm/page.h>` includes `<asm-generic/getorder.h>`.
3. `<asm-generic/getorder.h>` includes `<linux/log2.h>`, which defines the `ilog2` macro.
4. Additionally, `<linux/fs.h>` includes `<linux/slab.h>` -> `<linux/gfp.h>` -> `<linux/mmzone.h>` -> `<asm/page.h>` -> `<asm-generic/getorder.h>` -> `<linux/log2.h>`.]
|
| 98/2 |
2026/08/26 17:52 |
llm |
debugger |
0m
Model:
Tokens:
input: 21658
output: 28
thoughts: 320
Thoughts: **Refining the Block Size and Allocation Group Shift Checks**
Okay, using `ilog2` for `block_shift` is definitely cleaner, as I had initially thought. It leads to a much more concise check:
```c
if (ilog2(befs_sb->block_size) != befs_sb->block_shift) {
```
However, I need to consider `ag_shift` as well. The current code checks:
```c
if (befs_sb->ag_shift >= sizeof(u32) * 8 ||
(1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
It seems like I could use `ilog2` for `ag_shift` too, but there's a crucial requirement: `blocks_per_ag` *must* be a power of 2. I need to make sure I add a check for that. Wait, if it isn't a power of 2, the bit shift will never equal `blocks_per_ag` anyway. So the logic should be:
```c
if (!is_power_of_2(befs_sb->blocks_per_ag) ||
ilog2(befs_sb->blocks_per_ag) != befs_sb->ag_shift)
```
Now, the `is_power_of_2` function is in `<linux/log2.h>`, right? I should double-check that this is available in the BEFS context. Before I make any changes, let me take a quick look at how `ag_shift` is currently used within `fs/befs/` to ensure I'm not overlooking any dependencies or side effects. I need to understand the full implications of this change.
|
| 99/2 |
2026/08/26 17:52 |
tool |
grepper |
0m
Args: map[Expression:ag_shift PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-43- u32 blocks_per_ag;
fs/befs/befs.h:44: u32 ag_shift;
fs/befs/befs.h-45- u32 num_ags;
--
fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-127- fs32 blocks_per_ag;
fs/befs/befs_fs_types.h:128: fs32 ag_shift;
fs/befs/befs_fs_types.h-129- fs32 num_ags;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-178- fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c:179: befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c-180- befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-40- befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c:41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c-42- befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 100/2 |
2026/08/26 17:52 |
llm |
debugger |
0m
Model:
Tokens:
input: 23471
output: 39
thoughts: 161
Thoughts: **Analyzing `ag_shift` in BEFS Addressing**
Okay, so I'm looking at `iaddr2blockno` and its counterpart, and I see this `ag_shift` value being used. It seems pretty straightforward, shifting the allocation group and adding the start. But wait a minute... if `ag_shift` is *too* large, specifically if it's 32 or greater, we're talking about a shift-out-of-bounds error, and that's a problem. That could lead to some pretty nasty unexpected results.
Now, the important question is: what's the size of `iaddr->allocation_group`? Is it a `u32` or `u16`? That's the real key to whether this is a ticking time bomb. I need to go and check the definition of `befs_inode_addr` right now and verify. This kind of detail is critical for ensuring the stability and correct operation of the file system.
|
| 101/2 |
2026/08/26 17:52 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/befs/befs.h Name:befs_inode_addr]
Results: map[SourceCode: 108: typedef befs_block_run befs_inode_addr;
SourceFile:fs/befs/befs_fs_types.h]
|
| 102/2 |
2026/08/26 17:52 |
llm |
debugger |
0m
Model:
Tokens:
input: 23941
output: 43
thoughts: 12
Thoughts: Okay, here's my attempt at summarizing that thought process, tailored for an expert audience:
**Checking `befs_block_run`**
Right, let's dive in. First things first, I need to verify the state of `befs_block_run`. I'm going to take a look at it to see where we're at, and that will give me a point of origin. I'm thinking I'll need to check the dependencies, look at the last time it was successfully executed. I should check the logs for recent errors, if any. Based on that information, I'll assess whether it's running as expected, or if there's an issue I need to address. Depending on what I find, the next steps will be determined. It could be as simple as restarting it, or it could be a deeper dive into the configuration. I should also check the recent metrics around this if available.
|
| 103/2 |
2026/08/26 17:52 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/befs/befs_fs_types.h Name:befs_block_run]
Results: map[SourceCode: 101: typedef struct {
102: u32 allocation_group;
103: u16 start;
104: u16 len;
105: } PACKED befs_block_run;
SourceFile:fs/befs/befs_fs_types.h]
|
| 104/2 |
2026/08/26 17:52 |
llm |
debugger |
0m
Model:
Tokens:
input: 24294
output: 28
thoughts: 393
Thoughts: **My Current Assessment of the `ag_shift` Issue**
Okay, so `allocation_group` is a `u32`, right? And I see a potential problem: if `ag_shift` is 32 or greater, then the bit-shift operation `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` will result in undefined behavior. My immediate thought is, "We *absolutely* have to ensure that `ag_shift` is less than 32 to avoid UBSAN."
Then I think, hold on a second, if we're *already* checking that `ag_shift < 32`, then `1U << ag_shift` should be perfectly safe, as in the check itself.
But then I re-read the `befs_check_sb` function. It seems to have a check:
```c
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
This is where things get tricky. It's a "non-fatal consistency check", meaning it doesn't return an error code like `BEFS_ERR`. But here's the kicker: *if* `ag_shift` is 32 or more, it will still trigger UBSAN with the `1 << befs_sb->ag_shift`! We need to avoid that.
My next thought is, if it's non-fatal, the mount *continues*, and later calls like `iaddr2blockno` are called with `ag_shift >= 32` - boom, we have another out-of-bounds shift! This could cause real damage. So, even though it's "non-fatal" in terms of mounting, if `ag_shift >= 32`, we should probably make it fatal, or at the very least, we absolutely *must* fix the shift-out-of-bounds issue in `iaddr2blockno` or similar functions.
Then I get another worry: what if `ag_shift` *disagrees* with `blocks_per_ag`? Is it safe to continue then? If `ag_shift` is wrong, then `iaddr2blockno` will compute *incorrect* block numbers. This is a big problem. I need to check where else `ag_shift` is used to see if this inconsistency is potentially catastrophic. I need to dig deeper.
|
| 105/2 |
2026/08/26 17:52 |
tool |
grepper |
0m
Args: map[Expression:ag_shift PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-43- u32 blocks_per_ag;
fs/befs/befs.h:44: u32 ag_shift;
fs/befs/befs.h-45- u32 num_ags;
--
fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-127- fs32 blocks_per_ag;
fs/befs/befs_fs_types.h:128: fs32 ag_shift;
fs/befs/befs_fs_types.h-129- fs32 num_ags;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-178- fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c:179: befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c-180- befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-40- befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c:41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c-42- befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 106/2 |
2026/08/26 17:52 |
llm |
debugger |
0m
Model:
Tokens:
input: 26341
output: 30
thoughts: 86
Thoughts: **Investigating a Potential BEFS Corruption**
Okay, so I'm digging into this BEFS code, and something's not quite right. My gut feeling is that if the block numbers generated by `ag_shift` don't align with the expected `blocks_per_ag` value, we've got a definite corruption on our hands. That disagreement is a red flag. Now, here's where it gets interesting – I'm surprised to see that `blocks_per_ag` seems to be confined to just `befs_check_sb` and `befs_dump_super_block`. That limited scope feels suspicious, doesn't it? It makes me wonder if there's an oversight or a subtle bug hiding somewhere. I need to make absolutely sure there aren't any other sneaky uses of this crucial variable that I'm missing. Time to do a thorough code search and confirm this apparent isolation of `blocks_per_ag`.
|
| 107/2 |
2026/08/26 17:53 |
tool |
grepper |
0m
Args: map[Expression:blocks_per_ag PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-42- /* Allocation group information */
fs/befs/befs.h:43: u32 blocks_per_ag;
fs/befs/befs.h-44- u32 ag_shift;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-126- fs32 magic2;
fs/befs/befs_fs_types.h:127: fs32 blocks_per_ag;
fs/befs/befs_fs_types.h-128- fs32 ag_shift;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-176- befs_debug(sb, " magic2 %08x", fs32_to_cpu(sb, sup->magic2));
fs/befs/debug.c:177: befs_debug(sb, " blocks_per_ag %u",
fs/befs/debug.c:178: fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c-179- befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-39-
fs/befs/super.c:40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c-41- befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 108/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 27418
output: 40
thoughts: 105
Thoughts: **Analyzing Block Address Calculation in BEFS**
Okay, so I've pinned down that `blocks_per_ag` is *only* used within `befs_check_sb`, which is good to know for context. The real workhorse for block calculations is definitely `ag_shift`. That's the critical value. Now, if `ag_shift` gets too large, like, greater than or equal to 32, `iaddr2blockno` is going to have a bad day and shift right off the end of things. That's a classic overflow risk. But wait, what type does `iaddr2blockno` actually return? Ah, yes, it’s a `befs_blocknr_t`. Okay, time to double-check the definition of `befs_blocknr_t`... make sure that 64-bit unsigned integer type isn't getting clipped anywhere in the process!
|
| 109/2 |
2026/08/26 17:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/befs/befs.h Name:befs_blocknr_t]
Results: map[SourceCode: 18: typedef u64 befs_blocknr_t;
SourceFile:fs/befs/befs.h]
|
| 110/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 27811
output: 28
thoughts: 807
Thoughts: **Analyzing Potential Integer Overflow in BEFS Block Number Calculation**
Okay, so I'm looking at this BEFS code, specifically how block numbers are derived. I see that `befs_blocknr_t` is a `u64`, which is good for larger file systems. However, the `iaddr->allocation_group` is a `u32`, which immediately triggers some concerns. I'm focusing on the `iaddr2blockno` function:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
My main concern here is the shift operation. If `ag_shift` is 32 or greater, the left shift `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` becomes undefined behavior since `iaddr->allocation_group` is a `u32`. Even if `ag_shift` is less than 32, the shift can still overflow a `u32` value, resulting in a wrap-around, leading to an incorrect block number. The result of the left shift is a `u32`. This then gets added to `iaddr->start` (which is a `u16`), and the whole thing gets implicitly converted to a `u64` for the return value.
So, if `allocation_group` is large and `ag_shift` is non-zero, the shift *will* overflow, correct? Well, assuming the `allocation_group` value is large, and `ag_shift` isn't zero.
The problem could be solved by validating `ag_shift`. I think the check in `befs_check_sb` can be tightened up:
```c
if (befs_sb->block_shift != ilog2(befs_sb->block_size)) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
if (befs_sb->ag_shift >= sizeof(u32) * 8 ||
(1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
If `ag_shift` is greater than or equal to 32, we should return `BEFS_ERR` because `iaddr2blockno` will cause undefined behavior. The check for `(1U << befs_sb->ag_shift)` could also be problematic because a shift of 32 bits is undefined behavior. In a case where `blocks_per_ag` is zero, we'd need to check separately because `1U << ag_shift` will never be zero.
So, the proposed fix:
```c
if (befs_sb->ag_shift >= 32) {
befs_error(sb, "ag_shift >= 32");
return BEFS_ERR;
}
if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
It doesn't make sense for `ag_shift` to be 32, because that would imply `blocks_per_ag` is $2^{32}$, which, because it's a `u32` would wrap to zero. And the shift is undefined. So `ag_shift` must be strictly less than 32. Now I need to check the codebase to see how else these values are used.
|
| 111/2 |
2026/08/26 17:53 |
tool |
grepper |
0m
Args: map[Expression:block_shift PathPrefix:fs/befs/]
Results: map[Output:fs/befs/ChangeLog=204=Version 0.4 (2001-10-28)
--
fs/befs/ChangeLog-362-* Added additional consitency checks on mount
fs/befs/ChangeLog:363: Check block_size agrees with block_shift
fs/befs/ChangeLog-364- Check flags == BEFS_CLEAN
--
fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-34- u32 block_size;
fs/befs/befs.h:35: u32 block_shift;
fs/befs/befs.h-36- int byte_order;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-118- fs32 block_size;
fs/befs/befs_fs_types.h:119: fs32 block_shift;
fs/befs/befs_fs_types.h-120-
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-56- befs_debug(sb, "---> %s %llu", __func__, pos);
fs/befs/datastream.c:57: block = pos >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-58- if (off)
fs/befs/datastream.c:59: *off = pos - (block << BEFS_SB(sb)->block_shift);
fs/befs/datastream.c-60-
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.c-98- int err;
fs/befs/datastream.c:99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-100-
--
fs/befs/datastream.c=172=befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
--
fs/befs/datastream.c-180-
fs/befs/datastream.c:181: datablocks = ds->size >> befs_sb->block_shift;
fs/befs/datastream.c-182- if (ds->size & (befs_sb->block_size - 1))
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-322-
fs/befs/datastream.c:323: indir_start_blk = data->max_direct_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-324- search_blk = blockno - indir_start_blk;
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-433- befs_blocknr_t indir_start_blk =
fs/befs/datastream.c:434: data->max_indirect_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-435-
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-169- befs_debug(sb, " block_size %u", fs32_to_cpu(sb, sup->block_size));
fs/befs/debug.c:170: befs_debug(sb, " block_shift %u", fs32_to_cpu(sb, sup->block_shift));
fs/befs/debug.c-171-
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-34- befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
fs/befs/super.c:35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
fs/befs/super.c-36- befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-91- /*
fs/befs/super.c:92: * block_shift and block_size encode the same information
fs/befs/super.c-93- * in different ways as a consistency check.
--
fs/befs/super.c-95-
fs/befs/super.c:96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
fs/befs/super.c:97: befs_error(sb, "block_shift disagrees with block_size. "
fs/befs/super.c-98- "Corruption likely.");
]
|
| 112/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 30935
output: 28
thoughts: 244
Thoughts: **Analyzing `block_shift` in the BEFS Filesystem Code**
Okay, so I'm looking at how `block_shift` is being used within the BEFS filesystem code. I can see it's critical in `befs_read_datastream`, specifically calculating the block number and offset from a given position:
```c
block = pos >> BEFS_SB(sb)->block_shift;
if (off)
*off = pos - (block << BEFS_SB(sb)->block_shift);
```
And then there is its use in `befs_fblock2brun`:
```c
befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
```
Right, a bitwise right-shift ( `>>` ) or left-shift ( `<<` ) of a value by 32 or more bits is technically undefined behavior according to the C standard. The code looks like it could have a problem if `block_shift` is 32 or higher. But wait, I recall that the code already validates the `block_size` to be one of the typical values: 1024, 2048, 4096, or 8192 bytes. That's a good start.
I can make this more robust. If I tighten the check on `block_size` so that it also verifies `ilog2(befs_sb->block_size) != befs_sb->block_shift`, then `block_shift` will *guaranteed* to be 10, 11, 12, or 13. Which means we're safe from any undefined behavior in the shift operations.
Now, let's turn our attention to `ag_shift`.
|
| 113/2 |
2026/08/26 17:53 |
tool |
grepper |
0m
Args: map[Expression:ag_shift PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-43- u32 blocks_per_ag;
fs/befs/befs.h:44: u32 ag_shift;
fs/befs/befs.h-45- u32 num_ags;
--
fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-127- fs32 blocks_per_ag;
fs/befs/befs_fs_types.h:128: fs32 ag_shift;
fs/befs/befs_fs_types.h-129- fs32 num_ags;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-178- fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c:179: befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c-180- befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-40- befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c:41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c-42- befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 114/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 32650
output: 27
thoughts: 1439
Thoughts: **Analyzing a BEFS Filesystem Shift-Out-of-Bounds Vulnerability**
Okay, so I'm looking at this BEFS code, and the first thing that jumps out is this `iaddr2blockno` function. The core of the issue seems to stem from a shift operation: `iaddr->allocation_group << BEFS_SB(sb)->ag_shift`. If `allocation_group` is a 32-bit unsigned integer and `ag_shift` is large enough, this shift can lead to an integer overflow. However, `befs_blocknr_t` is a 64-bit unsigned integer, so ideally, we should cast to the wider type, like `(befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift` to avoid this potential overflow. It’s important, but the current crash trace is coming from elsewhere, specifically `befs_check_sb`, due to `1 << befs_sb->block_shift`.
Right, the UBSAN error in the trace clearly points to `1 << befs_sb->block_shift` where the exponent is too large for an `int`. This is in `fs/befs/super.c` at line 96. So we have this check: `if ((1 << befs_sb->block_shift) != befs_sb->block_size)`. A simple fix here seems to be changing it to using `ilog2`: `if (ilog2(befs_sb->block_size) != befs_sb->block_shift)`.
However, the real puzzle is with `ag_shift`. The code currently checks `if (befs_sb->ag_shift >= sizeof(u32) * 8 || (1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)`. If `ag_shift` is 32 or greater, we *only* print an error. We don't return an error, just continue. This is problematic because `ag_shift` is used in `iaddr2blockno`. If it's used with `ag_shift` >= 32, this is going to lead to the same shift-out-of-bounds issue.
I need to figure out: Is `iaddr2blockno` called during the mount, or later? If it's called during the mount, we crash immediately. If not, the crash happens later. To avoid any future UB, we should return `BEFS_ERR` if `ag_shift` disagrees with `blocks_per_ag`. Although there is a comment that this inconsistency is non-fatal. I'm not convinced. The comment seems to imply some historical BeOS oddities where these might be slightly off. But if `ag_shift` is used, it MUST be correct. `blocks_per_ag` isn't used anywhere else, it's just informational, so an incorrect value there doesn't matter. But a bad `ag_shift` value is going to cause UB or give wrong block numbers.
What's the *maximum* valid `ag_shift`? Well, the block number is 64-bit, the `allocation_group` is 32-bit. Theoretically, `ag_shift` could be up to 63. But here's the kicker: the shift is done with a 32-bit shift in the current code, meaning that if `ag_shift` is >= 32 we *guaranteed* UB. So `ag_shift` MUST be < 32.
And if `blocks_per_ag` is also a `u32`, then `ag_shift` must be < 32 anyway, because `blocks_per_ag = 1 << ag_shift`.
So, the fix is straightforward: we need to change that check. Let's make it more explicit:
```c
if (befs_sb->ag_shift >= 32) {
befs_error(sb, "ag_shift >= 32");
return BEFS_ERR;
}
if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Okay, wait... if `ag_shift` is 31, then `1U << 31` is `2147483648`. Is 31 valid? Yes, if `blocks_per_ag` is `2147483648`. But wait
|
| 115/2 |
2026/08/26 17:53 |
tool |
grepper |
0m
Args: map[Expression:1 << PathPrefix:fs/befs/]
Results: map[Output:fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-95-
fs/befs/super.c:96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
fs/befs/super.c-97- befs_error(sb, "block_shift disagrees with block_size. "
--
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c-107- befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
]
|
| 116/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 35357
output: 35
thoughts: 38
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Narrowing the Scope: BEFS Superblock Location**
Alright, it looks like my investigation has led me to just two potential locations within `fs/befs/super.c`. Time to double-check that file, specifically around line 96. I'm going to revisit that area and refresh my memory of what's happening there to see if I can find what I am looking for.
|
| 117/2 |
2026/08/26 17:53 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:90 LineCount:25]
Results: map[Contents: 90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
]
|
| 118/2 |
2026/08/26 17:53 |
llm |
debugger |
0m
Model:
Tokens:
input: 35940
output: 37
thoughts: 401
Thoughts: **Root Cause Analysis of the Befs Filesystem Vulnerability**
Okay, so if I'm going to lay out the root cause clearly, I need to start with the specifics. First, the `befs_check_sb` function is the culprit. It's reading `block_shift` and `ag_shift` values directly from the superblock, which is, of course, on the disk.
Then comes the vulnerable bit: these values are *immediately* used as shift exponents in those bit-shift operations: `1 << befs_sb->block_shift` and `1 << befs_sb->ag_shift`. The core problem? These values are *not* being validated before the shift operation. That's a huge oversight. This means a maliciously crafted filesystem could inject ludicrously large values—think something like `2066842816`—into these fields.
Now, here's the kicker from a C/C++ perspective. Shifting a `1` (which is a 32-bit signed integer in this case) by a value of 31 or greater results in *undefined behavior*. That's where the vulnerability lies. It’s a classic shift-out-of-bounds scenario. We get an arbitrarily large shift, resulting in unpredictable behavior.
So, how do we fix it? For `block_shift`, a good start is to check that `ilog2(befs_sb->block_size) != befs_sb->block_shift`. The code already validates `block_size` as a power of 2 between 1024 and 8192, so we can leverage that.
The fix for `ag_shift` is trickier and I have to be careful here. We have to ensure that `befs_sb->ag_shift < 32` before attempting `1U << befs_sb->ag_shift`. Wait, there might be a better way... is `blocks_per_ag` a power of 2? No, past checks don't guarantee that, so the shift operation is the better method, but we definitely need to limit the size of the shift. Hmm, now that I think about it, we should return an error if `ag_shift` is 32 or greater because it will cause undefined behavior in `iaddr2blockno` anyway.
Hang on. I should double check `iaddr2blockno` just to be sure...
|
| 119/2 |
2026/08/26 17:54 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:120 LineCount:20]
Results: map[Contents: 120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
]
|
| 120/2 |
2026/08/26 17:54 |
llm |
debugger |
0m
Model:
Tokens:
input: 37224
output: 28
thoughts: 164
Thoughts: **Addressing the Allocation Group Shift**
Okay, so I see that `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` appears in both `iaddr2blockno` and `blockno2iaddr`. My initial concern is whether there are potential undefined behaviors. Specifically, if `ag_shift` is greater than or equal to 32, this would definitely be UB given that `iaddr->allocation_group` is a `u32`. This means `ag_shift` *must* be strictly less than 32.
But hold on, that alone doesn't entirely solve the problem. Even if `ag_shift` is less than 32, couldn't the bitwise left-shift still overflow the `u32`? Of course, it's possible if `allocation_group` is large enough. However, isn't `allocation_group` bounded by the number of allocation groups, `num_ags`? I need to verify that `num_ags` is being properly validated to ensure the calculations don't produce any incorrect results or trigger an overflow. It's a critical detail and the next step is to examine that.
|
| 121/2 |
2026/08/26 17:54 |
tool |
grepper |
0m
Args: map[Expression:num_ags PathPrefix:fs/befs/]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-44- u32 ag_shift;
fs/befs/befs.h:45: u32 num_ags;
fs/befs/befs.h-46-
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-128- fs32 ag_shift;
fs/befs/befs_fs_types.h:129: fs32 num_ags;
fs/befs/befs_fs_types.h-130-
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-179- befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c:180: befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
fs/befs/debug.c-181-
--
fs/befs/io.c=27=befs_bread_iaddr(struct super_block *sb, befs_inode_addr iaddr)
--
fs/befs/io.c-36-
fs/befs/io.c:37: if (iaddr.allocation_group > befs_sb->num_ags) {
fs/befs/io.c-38- befs_error(sb, "BEFS: Invalid allocation group %u, max is %u",
fs/befs/io.c:39: iaddr.allocation_group, befs_sb->num_ags);
fs/befs/io.c-40- goto error;
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-41- befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c:42: befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
fs/befs/super.c-43-
]
|
| 122/2 |
2026/08/26 17:54 |
llm |
debugger |
0m
Model:
Tokens:
input: 38321
output: 36
thoughts: 54
Thoughts: Okay, here's my interpretation of those thoughts, framed as my own:
**Digging into BEFS Address Allocation**
Right, so I see a check in `befs_bread_iaddr` – specifically, it's comparing `iaddr.allocation_group` against `befs_sb->num_ags`. My immediate question is: Is `num_ags` itself validated anywhere before this? We all know that unchecked input is a recipe for disaster in kernel code, so I need to know where this value comes from and if it's being properly range-checked or sanity-checked. I'll need to look at `befs_check_sb` next to figure this out. I'm hoping I don't have to trace the code all the way back to the superblock read.
|
| 123/2 |
2026/08/26 17:54 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:100 LineCount:40]
Results: map[Contents: 100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 124/2 |
2026/08/26 17:54 |
llm |
debugger |
0m
Model:
Tokens:
input: 38890
output: 1310
thoughts: 3677
Thoughts: **Root Cause Analysis and Proposed Fix for BEFS Shift-Out-of-Bounds Vulnerability**
Alright, let's break this down. The core issue, as I see it, is a shift-out-of-bounds vulnerability lurking in the `befs_check_sb()` function within the BEFS filesystem code. Specifically, the kernel reads `block_shift` and `ag_shift` directly from the superblock on disk, treating these values as shift exponents without any rigorous validation. This is where things get dicey. The attacker can craft a malicious BEFS image with an absurdly large value for either `block_shift` or `ag_shift`, which then gets used in a shift operation. Since the initial `1` in the shift operation `(1 << befs_sb->block_shift)` is a *signed* 32-bit integer, shifting it by a value of 31 or greater triggers undefined behavior, leading to the reported crash. We can see this in the UBSAN output where it reports the shift exponent to be a massive number, `2066842816`.
The vulnerable code snippets, as I see it, are within the `fs/befs/super.c` file:
```c
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
The fix is straightforward. We *must* validate these shift exponents. My approach here is to leverage the already present information about the `block_size` as a power of 2, since the kernel validates `block_size` early in `befs_check_sb()`. Here's my proposed fix:
1. **For `block_shift`:** Because we know `block_size` *must* be one of the validated values (`1024`, `2048`, `4096`, or `8192`), ensuring `block_shift` is also $< 32$, and use an unsigned literal:
```c
if (befs_sb->block_shift >= 32 || (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
```
Alternatively, one could use `ilog2()` as it's cleaner and safer since `block_size` is already known to be a power of 2:
```c
if (befs_sb->block_shift != ilog2(befs_sb->block_size)) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
```
2. **For `ag_shift`:** This is slightly more complex. We *also* need to ensure it's less than 32, but importantly we *must* make `ag_shift >= 32` a fatal error, since it's used in calculations later. Here's my fix:
```c
if (befs_sb->ag_shift >= 32) {
befs_error(sb, "ag_shift >= 32");
return BEFS_ERR;
}
if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
With this change, we are certain that `ag_shift` can't cause another undefined behavior later in code.
This code will protect us from the UB.
Now, a bonus observation: while addressing this, I spotted a potential integer truncation issue in `fs/befs/befs.h`. Both `iaddr2blockno()` and `blockno2iaddr()` use a shift operation involving the `allocation_group` field, which is
|
| 125/1 |
2026/08/26 17:55 |
agent |
history-explorer |
4m
Model:
Instruction:
You are an experienced Linux kernel developer researching prior art for fixing a kernel bug.
You are given a bug explanation. This explanation details the root cause of the bug resulting
from debugging, but does not provide the final fix strategy. Your goal is to explore how
similar bugs were fixed in the past in the same subsystem or files.
CRITICAL: Do NOT attempt to debug the issue further or write a patch for it yourself.
Your ONLY objective is to research and provide the necessary historical context.
Use the git-log tool with the Since parameter set to "3 years" to focus on recent history.
Search for commits that address issues with similar root causes (e.g. similar missing locks,
incorrect refcounting, or similar error path bugs) in the affected files.
Your final reply must summarize your findings: what idioms, locking rules, or common patterns
should be followed when writing a fix for this bug based on how previous similar bugs were addressed.
If you find no relevant past fixes, clearly state that.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash is:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The explanation of the root cause of the bug is:
An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Reply: Based on a review of the kernel's git history over the last few years, particularly focusing on how similar `shift-out-of-bounds` and missing validation bugs were fixed in other filesystems (like `ocfs2`, `jfs`, and `squashfs`) as well as historical fixes in `befs`, the proposed fix perfectly aligns with established kernel idioms.
Here is a summary of the common patterns, idioms, and rules that should be followed when writing a fix for this bug:
### 1. Early and Strict Bounds Checking
Values read directly from disk (like superblock fields) are inherently untrusted and must be validated as early as possible, typically in `check_sb` or `fill_super` routines.
- **Prior Art:** In `ocfs2` (commit `23aab037106d`), a very similar UBSAN shift-out-of-bounds bug was fixed by explicitly checking if the shift exponent (`s_blocksize_bits`) was within a valid range (`9` to `12`) before performing the shift (`1 << blksz_bits`). Similarly, in `jfs` (commits `37bfb464ddca` and `cce219b203c4`), extensive bounds checking was added for on-disk values before they were used in shifts or array indexing.
- **Application:** Guarding `befs_sb->block_shift` and `befs_sb->ag_shift` with a `< 32` check before they are used in a shift operation is the correct and standard approach.
### 2. Fatal Errors for Critical Corruption
If an invalid value can cause a crash or undefined behavior later in the filesystem's lifecycle, it must be treated as a fatal error during the mount process, not just a warning.
- **Prior Art:** In `squashfs` (commit `734aa85390ea`), a failure to set the block size correctly resulted in a shift exponent of 64 later on. The fix was to catch the error early and return `-EINVAL` to abort the mount. In `befs` itself (commit `173b066f5826`), a check was added to ensure `sb_min_blocksize` succeeded, aborting the mount if it failed.
- **Application:** Changing the `ag_shift >= 32` check from a "non-fatal consistency check" to a fatal error (returning `BEFS_ERR`) is absolutely necessary. Since `ag_shift` is used in block address resolution (`iaddr2blockno`), allowing a bad value to pass would just defer the crash.
### 3. Preventing Signed Overflow and Truncation
When performing bitwise shifts, the kernel relies on strict type management to avoid undefined behavior and silent data corruption.
- **Unsigned Literals:** Shifting a signed integer (`1`) by 31 bits results in signed integer overflow (Undefined Behavior). Using an unsigned literal (`1U`) is the standard idiom to prevent this.
- **Type Casting Before Shifting:** When a shift operation on a 32-bit variable is expected to yield a 64-bit result, the variable must be explicitly cast to a 64-bit type *before* the shift.
- **Application:** Your secondary finding regarding `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` is spot on. Casting `allocation_group` to `befs_blocknr_t` (which is a 64-bit type) before the shift is the correct idiom to prevent silent 32-bit truncation.
### 4. Locking Rules
During `fill_super` (which calls `befs_check_sb`), the VFS has allocated the superblock, but it is not yet fully initialized or visible to user space/other threads. Therefore, no specific locks (like `s_umount` or internal spinlocks) are required to read or validate these fields. The validation can be done safely lockless.
### Conclusion
Your proposed patch strategy is highly robust and follows the exact same patterns used by filesystem maintainers to fix similar UBSAN shift-out-of-bounds vulnerabilities. You should proceed with submitting the patch series as you have proposed it.
|
| 126/2 |
2026/08/26 17:55 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 6413
output: 28
thoughts: 213
Thoughts: **Analyzing Prior Art for BEFS Superblock Shift-Out-of-Bounds Bug Fix**
Okay, so I'm tasked with digging into the past to see how similar problems in the BEFS filesystem have been handled. We're looking at a shift-out-of-bounds bug in `fs/befs/super.c`, stemming from unvalidated shift exponents read from the superblock. The user provided a root cause and a proposed fix, but my job is to see what the historical context can tell us.
My approach is to leverage `git-log`, specifically looking back three years to find any commits touching `fs/befs/super.c`, `fs/befs/befs.h`, or generally anything in `fs/befs/`. The goal is to uncover past fixes that addressed issues with similar characteristics: missing input validation, shift-out-of-bounds vulnerabilities, or similar error path bugs within that code base.
The ideal outcome is to identify recurring idioms, locking strategies, or common patterns used in addressing such problems. Do they consistently apply specific validation checks? Are there preferred methods for handling error paths related to data read from the filesystem? Has there been a move towards certain design patterns to mitigate these vulnerabilities? If there is any relevant prior art, I need to understand what strategies were applied so I can ensure the current fix conforms to existing standards.
Of course, if the history yields nothing directly applicable, that's valuable information, too. It means either this is a novel problem in this specific context, or that the problem is so infrequent in BEFS, that it has gone unnoticed in the past. In this scenario, I'll need to clearly state that no relevant prior art was found, which will help us understand whether or not to apply a more cautious approach when addressing the bug, in order to minimize risk in the future.
|
| 127/2 |
2026/08/26 17:55 |
tool |
git-log |
0m
Args: map[PathPrefix:fs/befs/ Since:3 years]
Results: map[Output:7597d42a2533 befs: handle set_blocksize failures
0b2600f81cef treewide: change inode->i_ino from unsigned long to u64
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
ca4388bf1d9e fs: add setlease to generic_ro_fops and read-only filesystem directory operations
b4dbfd8653b3 Coccinelle-based conversion to use ->i_state accessors
c3099e72bf4f befs: convert befs to use the new mount api
263cf5780497 befs: Convert befs_symlink_read_folio() to use folio_end_read()
f88c3fb81c4b mm, slab: remove last vestiges of SLAB_MEM_SPREAD
f6c8bfcf951f befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
]
|
| 128/2 |
2026/08/26 17:55 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 7329
output: 27
thoughts: 142
Thoughts: **Analyzing Recent BEFS Commits**
Okay, let's dive into the `fs/befs/` directory and see what kind of activity we've had there in the last three years. Hmm, only a few commits, which is interesting. Let's see... we've got `7597d42a2533` about handling `set_blocksize` failures, `c3099e72bf4f` which looks like a migration to the new mount API, and then `f6c8bfcf951f` dealing with `d_obtain_alias`.
My immediate thought is, does `7597d42a2533`, the `set_blocksize` one, have anything to do with some of the validation problems we've been seeing? Given our ongoing concerns around BEFS's robustness, that feels like the most likely candidate for further investigation right now. Let's start there.
|
| 129/2 |
2026/08/26 17:55 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 7597d42a25332617a3dfe596758d780ec6c028d7
Author: Christoph Hellwig <hch@lst.de>
Date: Mon May 11 09:16:50 2026 +0200
befs: handle set_blocksize failures
befs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-6-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index c12caae9a967..ee0cbae521b9 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -860,7 +860,8 @@ befs_fill_super(struct super_block *sb, struct fs_context *fc)
*/
sb->s_magic = BEFS_SUPER_MAGIC;
/* Set real blocksize of fs */
- sb_set_blocksize(sb, (ulong) befs_sb->block_size);
+ if (!sb_set_blocksize(sb, (ulong) befs_sb->block_size))
+ goto unacquire_priv_sbp;
sb->s_op = &befs_sops;
sb->s_export_op = &befs_export_operations;
sb->s_time_min = 0;
]
|
| 130/2 |
2026/08/26 17:55 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 8235
output: 40
thoughts: 58
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Missing `sb_set_blocksize` Error Check - Deep Dive Needed**
Right, so I'm looking at this code, and it's screaming at me that there's a missing error check in `sb_set_blocksize`. This could lead to some really nasty file system corruption if it's not handled correctly. I need to figure out how this is escaping detection.
Given the potential severity, I think a targeted investigation is in order, and it needs to be relatively broad. Let's make the search a bit more generous, possibly going back five or even ten years of commits. That should encompass enough changes to capture whatever introduced the issue, or if the lack of checking is a pre-existing condition, and in what context the functionality was added.
Also, I'm going to broaden the search keywords. I'll search `fs/` and, because it's always fun, `fs/befs/` for a "shift-out-of-bounds" pattern. That should hopefully uncover anything related to potential issues with block size calculations. Hopefully that will unearth a few culprits that I can run through to see if that error is in there. This seems like a potentially serious issue. Better to overdo it now than miss something critical.
|
| 131/2 |
2026/08/26 17:55 |
tool |
git-log |
0m
Args: map[CodeRegexp:shift-out-of-bounds Count:10 PathPrefix:fs/befs/]
Results:
|
| 132/2 |
2026/08/26 17:55 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 8630
output: 34
thoughts: 32
Thoughts: Okay, here's my take on those thoughts, framed as a first-person summary, keeping in mind my expertise:
**Checking for Unexpected Shift Operations in BEFS Filesystem Code**
Alright, I'm diving into the BEFS filesystem code. My first instinct, given my experience with filesystems and potential vulnerability points, is to immediately check for out-of-bounds shifts. Specifically, I need to make sure there aren't any places where bit-shifting operations could lead to unexpected behavior or buffer overflows. So, I'm thinking, "No, I'm not seeing anything obvious." My next move is to run a more deliberate and targeted search. The best approach is to be explicit. "Let's search for the term 'shift' within the `fs/befs/` directory and see what pops up." This should quickly identify any instances of `<<` or `>>` operations, allowing me to carefully review the context and ensure the shifts are safe and controlled, especially where offsets or sizes are involved. This is a crucial early step in any security audit or deep-dive analysis.
|
| 133/2 |
2026/08/26 17:56 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[shift] PathPrefix:fs/befs/]
Results: map[Output:12ecb38d03cf befs: fix style issues in header files
bbe1bd0b6bba befs: add check for ag_shift in superblock
]
|
| 134/2 |
2026/08/26 17:56 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 8980
output: 23
thoughts: 31
Thoughts: Here's my take on that commit, seeing as I'm an expert in this area:
**Analyzing That Superblock Modification**
Okay, so I'm looking at commit `bbe1bd0b6bba befs: add check for ag_shift in superblock`. This immediately grabs my attention. Anytime we're touching the superblock of a file system, particularly one as intricate as Btrfs (which I know inside and out), I'm inherently cautious. The superblock is *the* central metadata, the heart of the file system. A mistake there is... well, you know.
My first thought is always: *Why* are we modifying the `ag_shift` value? What's driving this change? I immediately start mentally running through the implications of potentially altering the allocation group shift. This affects the block size and alignment within the allocation groups, and that, in turn, impacts how efficiently data can be written, read, and allocated across the underlying devices. Any change here needs to be thoroughly justified and tested.
I'm mentally preparing to scrutinize the code diff. I'll be looking for several key things:
* **Context:** What problem is this solving? What's the *motivation* behind this change? A good commit message is essential, explaining the *why* as clearly as the *what*.
* **The Check:** What kind of check is being added? Is it a sanity check, verifying the value against some predefined limits or expectations? Is it a compatibility check, dealing with potential issues across different versions or configurations? Understanding the nature of the check will be crucial.
* **Error Handling:** How is the check handled? What happens if the `ag_shift` value is invalid? Is there a clear error message? Does the file system gracefully fail, or could it lead to more serious corruption?
* **Impact:** What is the scope of this change? Does this affect existing file systems? Is it only for new creations? Does it require a filesystem upgrade?
* **Testing:** What tests have been done? Have they simulated different scenarios, including potential corner cases, and tested for performance? I expect robust testing to accompany a change like this.
I'll be paying particularly close attention to potential regressions, as any change to the superblock could impact a wide range of functionality within the filesystem. I'll need to satisfy myself that this change is safe, well-reasoned, and, ultimately, beneficial. It's time to dive into the code!
|
| 135/2 |
2026/08/26 17:56 |
tool |
git-show |
0m
Args:
Results: map[Output:commit bbe1bd0b6bba138eaf441c6c964bde9866da8808
Author: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Tue Aug 9 22:23:36 2016 +0100
befs: add check for ag_shift in superblock
ag_shift and blocks_per_ag contain the same information in different ways,
same as block_shift and block_size do. It is worth checking this two are
consistent, but since blocks_per_ag isn't documented as mandatory to use
some implementations of befs don't enforce this, so making it non-fatal if
they don't match and just having it as a warning.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
diff --git a/fs/befs/super.c b/fs/befs/super.c
index dc13df8de3e8..c36745d2b45f 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -103,6 +103,13 @@ befs_check_sb(struct super_block *sb)
return BEFS_ERR;
}
+
+ /* ag_shift also encodes the same information as blocks_per_ag in a
+ * different way, non-fatal consistency check
+ */
+ if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
+
if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
]
|
| 136/2 |
2026/08/26 17:56 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 10105
output: 34
thoughts: 58
Thoughts: Okay, here's my take on those thoughts, framed as an expert in the field:
**Digging into the Befs Filesystem Code**
Alright, so I'm looking at this commit from 2016 – the one that brought in the `ag_shift` check. That's a good starting point, but it's not the whole story. I need to get a broader view of how this filesystem is handling potential issues. My gut feeling tells me there could be other commits addressing validation, checks, boundary conditions, potential overflows, or even UBSAN-related issues lurking within the `fs/befs/` directory.
I need to expand the search. I want to see how these concepts are being addressed more broadly within the same context. I'm going to run a more focused search in the `fs/befs/` code to try and uncover anything else related to memory safety and data integrity around that same time. Looking for "validate," "check," "bounds," "overflow," and "UBSAN" should give me a better understanding of the filesystem's evolution and any related vulnerabilities that might have been addressed (or perhaps, *not* addressed) over time. This targeted investigation will reveal the bigger picture.
|
| 137/2 |
2026/08/26 17:56 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[overflow] PathPrefix:fs/befs/]
Results: map[Output:7391928025f2 befs: Replace all non-returning strlcpy with strscpy
672a8515ee7c befs: remove unused BEFS_BT_PARMATCH
]
|
| 138/2 |
2026/08/26 17:56 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 10522
output: 34
thoughts: 7
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience, and written in the first person:
**Checking "Bounds" - A Mental Checklist**
Alright, time to circle back and rigorously check the "bounds" of my assumptions and parameters. *Why am I doing this?* Because in this field, we know that the devil is in the details, and overlooked constraints can be catastrophic, leading to incorrect results. It's too easy to get caught up in the elegant solution and forget the basic sanity checks.
First, I need to define the relevant bounds. Are we talking about spatial constraints, temporal limitations, or numerical ranges? Each of these facets has its own implications, and it's essential not to blur the lines. I should look back to the original specifications and assumptions of this model: Did I take this into account?
Then, the implementation itself. Were these bounds clearly stated in the implementation or are they implied? If they are implied, I need to look for documentation. Did I account for any edge cases that could cause the model to act erratically? If the limits are not enforced explicitly, how are violations handled? Are there fail-safes in place? Are those fail-safes fail-safe?
Next, I have to consider the potential sources of error and their impact. What are the potential consequences of exceeding those bounds? Is this a hard limit, or a soft guideline? What would be the performance impact, if the limits were reached? Would it trigger an exception, quietly degrade performance, or, worst-case, produce nonsensical results without warning?
Finally, are these bounds static, or dynamic? Do they depend on the input data, or some other external factor? If they change, how is the model made aware of those changes?
I must test with various datasets and parameters and see what occurs. That's the real test of a robust framework. If something gets violated, I need to know why and address the issue at its root. I should be able to produce results and explanations that will satisfy even the most rigorous critic. Let's make sure everything checks out.
|
| 139/2 |
2026/08/26 17:56 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[bounds] PathPrefix:fs/befs/]
Results: map[Output:5d097056c9a0 kmemcg: account certain kmem allocations to memcg
]
|
| 140/2 |
2026/08/26 17:56 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 11043
output: 34
thoughts: 7
Thoughts: Okay, I'm ready to summarize my "thoughts" in the first person, assuming a high level of expertise. Here we go:
**Focusing In: Validation**
Alright, I need to get this right, so let's zero in on this "validate" concept. It's a critical step, but its meaning is context-dependent. Am I dealing with data validation? Model validation? Validation of assumptions in my methodology? The term itself is too broad to operate on. I need to understand the *specific* object or process that needs to be validated before I can generate a useful summary. Let's see if this context clarifies what they are referring to, so I can provide actionable information.
|
| 141/2 |
2026/08/26 17:56 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[validate] PathPrefix:fs/befs/]
Results: map[Output:85a06b302a9d befs: fix style issues in inode.c
6ea4558f9b37 befs: add flags field to validate superblock state
d84e4a5a09c3 fs: befs: Remove redundant validation from befs_find_brun_direct
338d0f0a6fbc befs: Validate length of long symbolic links.
]
|
| 142/2 |
2026/08/26 17:56 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 11341
output: 26
thoughts: 17
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm the expert you're addressing:
**Investigating a Specific Identifier**
Alright, time to get to work. First, let's take a look at this identifier: `338d0f0a6fbc`. It's pretty common to see this kind of hex code. It looks like it could be a commit hash, a file ID, or even a database key depending on the context. My immediate thought is to check what this identifier represents within the current project or system. This is where the investigation really begins.
|
| 143/2 |
2026/08/26 17:57 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 338d0f0a6fbc82407864606f5b64b75aeb3c70f2
Author: Timo Warns <Warns@pre-sense.de>
Date: Wed Aug 17 17:59:56 2011 +0200
befs: Validate length of long symbolic links.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 54b8c28bebc8..720d885e8dca 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -474,17 +474,22 @@ befs_follow_link(struct dentry *dentry, struct nameidata *nd)
befs_data_stream *data = &befs_ino->i_data.ds;
befs_off_t len = data->size;
- befs_debug(sb, "Follow long symlink");
-
- link = kmalloc(len, GFP_NOFS);
- if (!link) {
- link = ERR_PTR(-ENOMEM);
- } else if (befs_read_lsymlink(sb, data, link, len) != len) {
- kfree(link);
- befs_error(sb, "Failed to read entire long symlink");
+ if (len == 0) {
+ befs_error(sb, "Long symlink with illegal length");
link = ERR_PTR(-EIO);
} else {
- link[len - 1] = '\0';
+ befs_debug(sb, "Follow long symlink");
+
+ link = kmalloc(len, GFP_NOFS);
+ if (!link) {
+ link = ERR_PTR(-ENOMEM);
+ } else if (befs_read_lsymlink(sb, data, link, len) != len) {
+ kfree(link);
+ befs_error(sb, "Failed to read entire long symlink");
+ link = ERR_PTR(-EIO);
+ } else {
+ link[len - 1] = '\0';
+ }
}
} else {
link = befs_ino->i_data.symlink;
]
|
| 144/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 12177
output: 34
thoughts: 15
Thoughts: Here's a summary of my thought process, as if I were the one thinking it:
**Examining the BEFS Filesystem**
Okay, time to dive in. My immediate thought is, "Let's investigate the 'check' functionality within the BEFS (BeOS File System) implementation." I need to understand how this vital component works, likely in `fs/befs/`. I'm specifically thinking about how it verifies the integrity of the filesystem. Is it a separate utility? Is it integrated into the kernel's file system driver? What structures does it use to determine consistency? Where are the critical data structures defined? Is it a quick metadata check, a full block-by-block scan, or something more sophisticated, perhaps incrementally verifying changes? Knowing this is fundamental for debugging, performance analysis, and potentially even contributing to or improving this filesystem. I need to figure out what files or code within that directory are responsible. Time to pull up the source and start digging.
|
| 145/2 |
2026/08/26 17:57 |
tool |
git-log |
0m
Args: map[Count:20 MessageRegexps:[check] PathPrefix:fs/befs/]
Results: map[Output:bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
263cf5780497 befs: Convert befs_symlink_read_folio() to use folio_end_read()
0fc256d3ad76 befs: Define usercopy region in befs_inode_cache slab cache
b24413180f56 License cleanup: add SPDX GPL-2.0 license identifier to files with no license
12ecb38d03cf befs: fix style issues in header files
62b80719dfe1 befs: fix style issues in linuxvfs.c
4c7df6455923 befs: fix style issues in io.c
85a06b302a9d befs: fix style issues in inode.c
a83179a8e95e befs: fix style issues in debug.c
a17e7d2010b4 befs: befs: fix style issues in datastream.c
103c0fb3400b befs: fix style issues in super.c
bbe1bd0b6bba befs: add check for ag_shift in superblock
6ea4558f9b37 befs: add flags field to validate superblock state
a64998504ebd fs: befs: check silent flag before logging error
173b066f5826 befs: check return of sb_min_blocksize
dceee2e230e0 fs/befs/linuxvfs.c: check silent flag before logging errors
8e19189ef8d1 fs/befs/linuxvfs.c: check superblock before dump operation
fe786f61f323 befs: remove check for CONFIG_BEFS_RW
7f78e0351394 fs: Limit sys_mount to only request filesystem modules.
]
|
| 146/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 12947
output: 27
thoughts: 30
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in the weeds of kernel development and understand the context:
**Let's Verify That `sb_min_blocksize` Is Returning Correctly**
Alright, time to dive into that specific commit, `173b066f5826`, which I recall deals with something related to the minimum block size of the superblock. Let's make sure it's behaving as expected. Specifically, I need to verify the return values of the `sb_min_blocksize` function, and how those values are being handled downstream. There's probably a potential issue lurking in the interaction. I need to refresh my memory on what that commit was intended to address and the possible edge cases. Maybe a regression test exposed something, or it's a code review finding. Either way, it's worth a close inspection to ensure data integrity and system stability. I need to mentally walk through the logic, think about potential race conditions or incorrect calculations, and make sure that the reported size is being correctly leveraged in subsequent operations.
|
| 147/2 |
2026/08/26 17:57 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 173b066f5826e8eca9b67e8091cab67fcda74f2f
Author: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Sat Jul 23 22:36:42 2016 +1000
befs: check return of sb_min_blocksize
Confirm sb_min_blocksize() succeeded before continuing.
Link: http://lkml.kernel.org/r/1465700235-22881-1-git-send-email-luisbg@osg.samsung.com
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index c734f21fd581..453bb68da219 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -756,6 +756,7 @@ befs_fill_super(struct super_block *sb, void *data, int silent)
long ret = -EINVAL;
const unsigned long sb_block = 0;
const off_t x86_sb_off = 512;
+ int blocksize;
save_mount_options(sb, data);
@@ -788,7 +789,11 @@ befs_fill_super(struct super_block *sb, void *data, int silent)
* least 1k to get the second 512 bytes of the volume.
* -WD 10-26-01
*/
- sb_min_blocksize(sb, 1024);
+ blocksize = sb_min_blocksize(sb, 1024);
+ if (!blocksize) {
+ befs_error(sb, "unable to set blocksize");
+ goto unacquire_priv_sbp;
+ }
if (!(bh = sb_bread(sb, sb_block))) {
if (!silent)
]
|
| 148/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 13839
output: 26
thoughts: 27
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Analyzing the Superblock Validation Commit**
Okay, let's dive into commit `6ea4558f9b37 befs: add flags field to validate superblock state`. My immediate thought is, what are the specifics of this new "flags field" within the superblock? My initial question is: what problem is it trying to address? I expect this field to be something beyond the usual checksum and magic number checks we already have, maybe aiming for more nuanced validation or finer-grained control over the filesystem's operational state. I'm thinking about potential issues like detecting corruption during specific operations, guarding against partially written superblocks, or perhaps even marking the filesystem as needing a specific repair routine on boot. I'm curious if it's a bitfield, and if so, what individual flags are defined. More to the point, what validation routines are *actually* leveraging this new field? I hope it's not simply added but also used to make some decisions. I will need to look at the commit, the code, and any related documentation to understand the intended use case and the specific invariants it enforces. I want to see if this addition is robust and doesn't introduce any new vulnerabilities or performance bottlenecks. Finally, I'll be keeping a keen eye out for potential interactions with existing error handling and recovery mechanisms; a superblock validation change like this could have far-reaching implications.
|
| 149/2 |
2026/08/26 17:57 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 6ea4558f9b373b588162e5d3523bc65fcf669b06
Author: Salah Triki <salah.triki@gmail.com>
Date: Tue Aug 9 14:46:04 2016 +0100
befs: add flags field to validate superblock state
For validating superblock state, add flags field to befs_sb_info, read the state from the disk
and check if it is equal to BEFS_DIRTY.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index a8ca7fcf0795..af8ea961e88f 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -43,6 +43,9 @@ struct befs_sb_info {
u32 ag_shift;
u32 num_ags;
+ /* State of the superblock */
+ u32 flags;
+
/* jornal log entry */
befs_block_run log_blocks;
befs_off_t log_start;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 9d1b56cd6f19..dc13df8de3e8 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -45,6 +45,8 @@ befs_load_sb(struct super_block *sb, befs_super_block * disk_sb)
befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
+ befs_sb->flags = fs32_to_cpu(sb, disk_sb->flags);
+
befs_sb->log_blocks = fsrun_to_cpu(sb, disk_sb->log_blocks);
befs_sb->log_start = fs64_to_cpu(sb, disk_sb->log_start);
befs_sb->log_end = fs64_to_cpu(sb, disk_sb->log_end);
@@ -101,7 +103,7 @@ befs_check_sb(struct super_block *sb)
return BEFS_ERR;
}
- if (befs_sb->log_start != befs_sb->log_end) {
+ if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
"to make it clean.");
]
|
| 150/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 15025
output: 27
thoughts: 35
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in the weeds of kernel development and specifically working on a filesystem, probably a variant of BeFS:
**Analyzing a Kernel Patch: Redundancy in `befs_find_brun_direct`**
Right, let's dive into this patch: `d84e4a5a09c3`. That's the commit hash, which is the immediate identifier for this change. I need to understand what's been modified, and the title says it has something to do with `fs: befs: Remove redundant validation from befs_find_brun_direct`. The key phrase that jumps out is "redundant validation." This is precisely the kind of optimization I'm always looking for. It often means there was a potential performance bottleneck, or perhaps the validation was just inefficiently coded. `befs_find_brun_direct`... that sounds like a core function, probably used to find a block run directly in BeFS, maybe from an inode structure. I’ll need to figure out *what* validation was deemed redundant, and *why*. Hopefully, the change is well-documented, with comments explaining the logic behind the original code, the problem with it, and the rationale for the change. I need to ensure that the removal of this validation doesn't introduce any new vulnerabilities or correctness issues. The primary goal of a filesystem is data integrity, so I have to be completely certain of this. I’ll start by pulling up the diff and carefully reviewing the code.
|
| 151/2 |
2026/08/26 17:57 |
tool |
git-show |
0m
Args:
Results: map[Output:commit d84e4a5a09c320e209789d263a26617f6f7324e3
Author: Salah Triki <salah.triki@gmail.com>
Date: Wed Jul 27 04:11:52 2016 +0100
fs: befs: Remove redundant validation from befs_find_brun_direct
The only caller of befs_find_brun_direct is befs_fblock2brun, which
already validates that the block is within the range of direct blocks.
So remove the duplicate validation.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>
diff --git a/fs/befs/datastream.c b/fs/befs/datastream.c
index 740fabcd57c0..41ce07766328 100644
--- a/fs/befs/datastream.c
+++ b/fs/befs/datastream.c
@@ -249,17 +249,9 @@ befs_find_brun_direct(struct super_block *sb, const befs_data_stream *data,
int i;
const befs_block_run *array = data->direct;
befs_blocknr_t sum;
- befs_blocknr_t max_block =
- data->max_direct_range >> BEFS_SB(sb)->block_shift;
befs_debug(sb, "---> %s, find %lu", __func__, (unsigned long)blockno);
- if (blockno > max_block) {
- befs_error(sb, "%s passed block outside of direct region",
- __func__);
- return BEFS_ERR;
- }
-
for (i = 0, sum = 0; i < BEFS_NUM_DIRECT_BLOCKS;
sum += array[i].len, i++) {
if (blockno >= sum && blockno < sum + (array[i].len)) {
]
|
| 152/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 15987
output: 44
thoughts: 332
Thoughts: **My Initial Thoughts on BEFS Validation Commits**
Okay, so I've been looking at some commits in `fs/befs/` related to validation, and here's what I've found. There's `bbe1bd0b6bba` from 2016, which is the one we're dealing with, that added a check for `ag_shift` in the superblock, and it's non-fatal. Then there's `338d0f0a6fbc` from 2011, which validates the length of long symbolic links. I see `173b066f5826` and `6ea4558f9b37`, also from 2016, checking `sb_min_blocksize` and validating the superblock state using a flags field. Finally, there's `7597d42a2533`, although I'm a bit skeptical about that date, it's listed as 2026, which seems odd. Oh wait, I see the mistake. 2026 is actually 2024. Regardless, it deals with handling failures in `set_blocksize`.
Now, the prompt specifically wants me to use `git-log` with a "3 years" since parameter to focus on recent history and look for issues with similar root causes. My instinct is telling me to expand the scope of my search. Why limit it to the specific file system? I should look for those "shift-out-of-bounds" or similar issues, particularly in `super.c` or similar, perhaps within the whole kernel or at least more broadly within `fs/`. It would be good to look at potentially related bugs in other file systems. I have to think about what other filesystems would use the same structures and concepts. Let's see what a broader search reveals.
|
| 153/2 |
2026/08/26 17:57 |
tool |
git-log |
0m
Args: map[CodeRegexp:shift-out-of-bounds Count:10 PathPrefix:fs/ Since:3 years]
Results:
|
| 154/2 |
2026/08/26 17:57 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 16788
output: 44
thoughts: 29
Thoughts: Okay, here's my interpretation of that thought process, summarized as you requested:
**Investigating a Potential File System Vulnerability**
Alright, time to get to work. I need to dig into something that smells potentially problematic. Let's start with a focused search. My initial instinct is to look for mentions of "shift-out-of-bounds," which often flags memory access issues, specifically, I suspect in file system code. I'm going to confine the search to the `fs/` directory, naturally, since that's where I believe the vulnerability lies. I'll need to limit the scope to the last three years of commit messages because I believe that the timeframe is correct for the specific code base and issue I am seeking. This search will be a good starting point for zeroing in on a potential vulnerability in this area of the code base. Let's see what we can turn up!
|
| 155/2 |
2026/08/26 17:58 |
tool |
git-log |
0m
Args: map[Count:10 MessageRegexps:[shift-out-of-bounds] PathPrefix:fs/ Since:3 years]
Results: map[Output:cce219b203c4 jfs: add dmapctl integrity check to prevent invalid operations
1e39da974ce6 fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
856db3759202 jfs: fix metapage reference count leak in dbAllocCtl
734aa85390ea Squashfs: check return result of sb_min_blocksize
37bfb464ddca jfs: validate AG parameters in dbMount() to prevent crashes
9c18ea7ffee0 bcachefs: bch2_get_random_u64_below()
6cfe56fbad32 ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
23aab037106d ocfs2: fix UBSAN warning in ocfs2_verify_volume()
a5f5e4698f8a jfs: fix shift-out-of-bounds in dbSplit
5c41f75d1b92 bcachefs: fix shift oob in alloc_lru_idx_fragmentation
]
|
| 156/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 17339
output: 24
thoughts: 59
Thoughts: Okay, let's dive into these two commits. I need to make sure I understand the context and implications.
**Checking Key Commits: A Deep Dive**
Alright, I see two commits I need to examine more closely: `37bfb464ddca jfs: validate AG parameters in dbMount() to prevent crashes` and `23aab037106d ocfs2: fix UBSAN warning in ocfs2_verify_volume()`. The first one sounds critical; validating AG parameters during `dbMount()` in the JFS filesystem to prevent crashes. That's a classic example of proactively addressing a potential stability issue. I'll need to look at the code changes to understand exactly what parameters are being validated and how, and also the kind of crashes they were preventing. This could relate to some specific configuration or corner cases I have dealt with in the past. It will be important to confirm the patch is correct and effective.
The second commit, `23aab037106d ocfs2: fix UBSAN warning in ocfs2_verify_volume()`, is also relevant. UBSAN warnings are never good. It signals undefined behavior that could lead to subtle corruption or unexpected crashes in the OCFS2 filesystem. The fact that the fix involves `ocfs2_verify_volume()` is important because this is a function crucial for data integrity. I need to understand the nature of the UBSAN warning—was it an out-of-bounds access, a type confusion, or something else?—and how the commit addressed it. I'll need to verify that this fix correctly addresses the underlying issue, and that it doesn't introduce any performance regressions or, worse, new bugs. I'll definitely want to see if this is related to any known issues in my system.
|
| 157/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 37bfb464ddca87f203071b5bd562cd91ddc0b40a
Author: Vasiliy Kovalev <kovalev@altlinux.org>
Date: Mon Mar 10 11:56:02 2025 +0300
jfs: validate AG parameters in dbMount() to prevent crashes
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+fe8264911355151c487f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe8264911355151c487f
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 26e89d0c69b6..35e063c9f3a4 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -194,7 +194,11 @@ int dbMount(struct inode *ipbmap)
!bmp->db_numag || (bmp->db_numag > MAXAG) ||
(bmp->db_maxag >= MAXAG) || (bmp->db_maxag < 0) ||
(bmp->db_agpref >= MAXAG) || (bmp->db_agpref < 0) ||
- !bmp->db_agwidth ||
+ (bmp->db_agheight < 0) || (bmp->db_agheight > (L2LPERCTL >> 1)) ||
+ (bmp->db_agwidth < 1) || (bmp->db_agwidth > (LPERCTL / MAXAG)) ||
+ (bmp->db_agwidth > (1 << (L2LPERCTL - (bmp->db_agheight << 1)))) ||
+ (bmp->db_agstart < 0) ||
+ (bmp->db_agstart > (CTLTREESIZE - 1 - bmp->db_agwidth * (MAXAG - 1))) ||
(bmp->db_agl2size > L2MAXL2SIZE - L2MAXAG) ||
(bmp->db_agl2size < 0) ||
((bmp->db_mapsize - 1) >> bmp->db_agl2size) > MAXAG) {
]
|
| 158/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 19372
output: 26
thoughts: 34
Thoughts: Here's my take on those thoughts:
**Analyzing that OCFS2 UBSAN Fix**
Okay, so I see we're looking at commit `23aab037106d`, which is specifically about addressing a UBSAN warning within the `ocfs2_verify_volume()` function. UBSAN, or Undefined Behavior Sanitizer, is a critical tool for identifying potential problems in the codebase, especially those tricky, hard-to-debug memory errors or violations of the C standard. My immediate concern is what kind of undefined behavior was flagged and what the root cause was. A "fix" suggests there *was* a real problem, not just a spurious warning. It's time to dive in and see how they addressed the issue. I'll need to understand the specifics of the warning itself to make a judgment call. Was it a simple arithmetic issue? A potential memory corruption vulnerability? The context is everything. What's the volume verification function *actually* trying to verify? Knowing that'll help in understanding whether the fix is robust or a potential band-aid solution. I'll be looking for potential side effects, too. Did this fix introduce any new issues or performance regressions? The code's going to have to prove itself trustworthy after the "fix."
|
| 159/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 23aab037106d46e6168ce1214a958ce9bf317f2e
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Wed Nov 6 12:21:00 2024 +0300
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
Syzbot has reported the following splat triggered by UBSAN:
UBSAN: shift-out-of-bounds in fs/ocfs2/super.c:2336:10
shift exponent 32768 is too large for 32-bit type 'int'
CPU: 2 UID: 0 PID: 5255 Comm: repro Not tainted 6.12.0-rc4-syzkaller-00047-gc2ee9f594da8 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x241/0x360
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? __asan_memset+0x23/0x50
? lockdep_init_map_type+0xa1/0x910
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420
ocfs2_fill_super+0xf9c/0x5750
? __pfx_ocfs2_fill_super+0x10/0x10
? __pfx_validate_chain+0x10/0x10
? __pfx_validate_chain+0x10/0x10
? validate_chain+0x11e/0x5920
? __lock_acquire+0x1384/0x2050
? __pfx_validate_chain+0x10/0x10
? string+0x26a/0x2b0
? widen_string+0x3a/0x310
? string+0x26a/0x2b0
? bdev_name+0x2b1/0x3c0
? pointer+0x703/0x1210
? __pfx_pointer+0x10/0x10
? __pfx_format_decode+0x10/0x10
? __lock_acquire+0x1384/0x2050
? vsnprintf+0x1ccd/0x1da0
? snprintf+0xda/0x120
? __pfx_lock_release+0x10/0x10
? do_raw_spin_lock+0x14f/0x370
? __pfx_snprintf+0x10/0x10
? set_blocksize+0x1f9/0x360
? sb_set_blocksize+0x98/0xf0
? setup_bdev_super+0x4e6/0x5d0
mount_bdev+0x20c/0x2d0
? __pfx_ocfs2_fill_super+0x10/0x10
? __pfx_mount_bdev+0x10/0x10
? vfs_parse_fs_string+0x190/0x230
? __pfx_vfs_parse_fs_string+0x10/0x10
legacy_get_tree+0xf0/0x190
? __pfx_ocfs2_mount+0x10/0x10
vfs_get_tree+0x92/0x2b0
do_new_mount+0x2be/0xb40
? __pfx_do_new_mount+0x10/0x10
__se_sys_mount+0x2d6/0x3c0
? __pfx___se_sys_mount+0x10/0x10
? do_syscall_64+0x100/0x230
? __x64_sys_mount+0x20/0xc0
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f37cae96fda
Code: 48 8b 0d 51 ce 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1e ce 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff6c1aa228 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007fff6c1aa240 RCX: 00007f37cae96fda
RDX: 00000000200002c0 RSI: 0000000020000040 RDI: 00007fff6c1aa240
RBP: 0000000000000004 R08: 00007fff6c1aa280 R09: 0000000000000000
R10: 00000000000008c0 R11: 0000000000000206 R12: 00000000000008c0
R13: 00007fff6c1aa280 R14: 0000000000000003 R15: 0000000001000000
</TASK>
For a really damaged superblock, the value of 'i_super.s_blocksize_bits'
may exceed the maximum possible shift for an underlying 'int'. So add an
extra check whether the aforementioned field represents the valid block
size, which is 512 bytes, 1K, 2K, or 4K.
Link: https://lkml.kernel.org/r/20241106092100.2661330-1-dmantipov@yandex.ru
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+56f7cd1abe4b8e475180@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=56f7cd1abe4b8e475180
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 3d404624bb96..c79b4291777f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2319,6 +2319,7 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
struct ocfs2_blockcheck_stats *stats)
{
int status = -EAGAIN;
+ u32 blksz_bits;
if (memcmp(di->i_signature, OCFS2_SUPER_BLOCK_SIGNATURE,
strlen(OCFS2_SUPER_BLOCK_SIGNATURE)) == 0) {
@@ -2333,11 +2334,15 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
goto out;
}
status = -EINVAL;
- if ((1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits)) != blksz) {
+ /* Acceptable block sizes are 512 bytes, 1K, 2K and 4K. */
+ blksz_bits = le32_to_cpu(di->id2.i_super.s_blocksize_bits);
+ if (blksz_bits < 9 || blksz_bits > 12) {
mlog(ML_ERROR, "found superblock with incorrect block "
- "size: found %u, should be %u\n",
- 1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits),
- blksz);
+ "size bits: found %u, should be 9, 10, 11, or 12\n",
+ blksz_bits);
+ } else if ((1 << le32_to_cpu(blksz_bits)) != blksz) {
+ mlog(ML_ERROR, "found superblock with incorrect block "
+ "size: found %u, should be %u\n", 1 << blksz_bits, blksz);
} else if (le16_to_cpu(di->id2.i_super.s_major_rev_level) !=
OCFS2_MAJOR_REV_LEVEL ||
le16_to_cpu(di->id2.i_super.s_minor_rev_level) !=
]
|
| 160/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 22497
output: 25
thoughts: 102
Thoughts: **Analyzing the `ocfs2` Commit for Parallels**
Okay, this `ocfs2` commit is definitely hitting on something relevant to the problems we've been diagnosing. It looks like it's addressing a shift-out-of-bounds issue, specifically by validating the shift exponent, `s_blocksize_bits`, to ensure it falls within the expected range of 9 to 12. This prevents that problematic `1 << blksz_bits` operation from going haywire. It's a classic case of guarding against potentially undefined behavior from a bit shift. I need to make sure this is actually happening in our setup.
Hmm... let me check `1e39da974ce6 fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT` to make sure the same root cause wasn't addressed elsewhere.
|
| 161/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 1e39da974ce621ed874c6d3aaf65ad14848c9f0d
Author: Yongpeng Yang <yangyongpeng@xiaomi.com>
Date: Tue Nov 4 16:36:42 2025 -0800
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.
[ 2.697306] ------------[ cut here ]------------
[ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[ 2.697311] shift exponent -1 is negative
[ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 2.697320] Call Trace:
[ 2.697324] <TASK>
[ 2.697325] dump_stack_lvl+0x76/0xa0
[ 2.697340] dump_stack+0x10/0x20
[ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94
[ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[ 2.697365] submit_bh_wbc+0xb6/0x190
[ 2.697370] block_read_full_folio+0x194/0x270
[ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10
[ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10
[ 2.697377] blkdev_read_folio+0x18/0x30
[ 2.697379] filemap_read_folio+0x40/0xe0
[ 2.697382] filemap_get_pages+0x5ef/0x7a0
[ 2.697385] ? mmap_region+0x63/0xd0
[ 2.697389] filemap_read+0x11d/0x520
[ 2.697392] blkdev_read_iter+0x7c/0x180
[ 2.697393] vfs_read+0x261/0x390
[ 2.697397] ksys_read+0x71/0xf0
[ 2.697398] __x64_sys_read+0x19/0x30
[ 2.697399] x64_sys_call+0x1e88/0x26a0
[ 2.697405] do_syscall_64+0x80/0x670
[ 2.697410] ? __x64_sys_newfstat+0x15/0x20
[ 2.697414] ? x64_sys_call+0x204a/0x26a0
[ 2.697415] ? do_syscall_64+0xb8/0x670
[ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0
[ 2.697420] ? irqentry_exit+0x43/0x50
[ 2.697421] ? exc_page_fault+0x90/0x1b0
[ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2.697425] RIP: 0033:0x75054cba4a06
[ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[ 2.697436] </TASK>
[ 2.697436] ---[ end trace ]---
This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.
File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Fixes: 47dd67532303 ("block/bdev: lift block size restrictions to 64k")
Cc: stable@vger.kernel.org
[EB: use folio_pos() and consolidate the two shifts by i_blkbits]
Link: https://lore.kernel.org/r/20251105003642.42796-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index 5dee7c498bc8..ed6e926226b5 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -333,8 +333,7 @@ static bool bh_get_inode_and_lblk_num(const struct buffer_head *bh,
inode = mapping->host;
*inode_ret = inode;
- *lblk_num_ret = ((u64)folio->index << (PAGE_SHIFT - inode->i_blkbits)) +
- (bh_offset(bh) >> inode->i_blkbits);
+ *lblk_num_ret = (folio_pos(folio) + bh_offset(bh)) >> inode->i_blkbits;
return true;
}
]
|
| 162/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 25412
output: 25
thoughts: 45
Thoughts: Okay, here's my interpretation of those thoughts, presented as my own mental process, given my expertise:
**Refactoring Consideration & Code Inspection**
Hmm, this is a slightly unusual request, but it looks like we're diving into a code refactor. The note about avoiding a "negative shift" immediately flags that this isn't a simple stylistic change. It likely relates to a potential integer underflow issue, or something similar, within the bitwise operations. These kinds of low-level errors can be incredibly subtle and lead to difficult-to-debug problems later.
Given the context, I'm thinking of checking the commit *734aa85390ea Squashfs: check return result of sb_min_blocksize*. That points to a particular Squashfs-related change and, importantly, involves validating the return result of `sb_min_blocksize`. This makes me think it's a critical fix, specifically related to ensuring `sb_min_blocksize` returns a valid value and is handled appropriately. This likely prevents a value that would cause undefined behavior. I need to delve into that commit's details to understand the exact problem and what the refactoring intends to mitigate. This is the place to start understanding the reasoning behind the change and whether it is implemented correctly.
|
| 163/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 734aa85390ea693bb7eaf2240623d41b03705c84
Author: Phillip Lougher <phillip@squashfs.org.uk>
Date: Wed Apr 9 03:47:47 2025 +0100
Squashfs: check return result of sb_min_blocksize
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
----
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = ffz(~msblk->devblksize);
----
sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0.
As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2
is set to 64.
This subsequently causes the
UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36
shift exponent 64 is too large for 64-bit type 'u64' (aka
'unsigned long long')
This commit adds a check for a 0 return by sb_min_blocksize().
Link: https://lkml.kernel.org/r/20250409024747.876480-1-phillip@squashfs.org.uk
Fixes: 0aa666190509 ("Squashfs: super block operations")
Reported-by: syzbot+65761fc25a137b9c8c6e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67f0dd7a.050a0220.0a13.0230.GAE@google.com/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 67c55fe32ce8..992ea0e37257 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -202,6 +202,11 @@ static int squashfs_fill_super(struct super_block *sb, struct fs_context *fc)
msblk->panic_on_errors = (opts->errors == Opt_errors_panic);
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
+ if (!msblk->devblksize) {
+ errorf(fc, "squashfs: unable to set blocksize\n");
+ return -EINVAL;
+ }
+
msblk->devblksize_log2 = ffz(~msblk->devblksize);
mutex_init(&msblk->meta_index_mutex);
]
|
| 164/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 26698
output: 27
thoughts: 97
Thoughts: **Analyzing a Shift-Out-of-Bounds Issue**
Okay, so this appears to be another instance of that dreaded "shift-out-of-bounds" problem, and it looks like it's being triggered because the `sb_min_blocksize` function is returning a zero value. I've seen something similar before, specifically in the `befs` file system fix, which was addressed in commit `173b066f5826` where they implemented a check on the return of `sb_min_blocksize`. It's a classic case of assuming a valid value, isn't it? Gotta be defensive there.
Now, to get a better handle on this, let's take a look at the `jfs` file system to see how they handled a similar problem with the `dbSplit` routine, which was addressed in commit `a5f5e4698f8a`. I'm hoping there will be some valuable insight.
|
| 165/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d
Author: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Date: Mon Sep 30 13:42:18 2024 +0530
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself.
Reported-by: syzbot+b5ca8a249162c4b9a7d0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ca8a249162c4b9a7d0
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 3ab410059dc2..39957361a7ee 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -1820,6 +1820,9 @@ dbAllocCtl(struct bmap * bmp, s64 nblocks, int l2nb, s64 blkno, s64 * results)
return -EIO;
dp = (struct dmap *) mp->data;
+ if (dp->tree.budmin < 0)
+ return -EIO;
+
/* try to allocate the blocks.
*/
rc = dbAllocDmapLev(bmp, dp, (int) nblocks, l2nb, results);
]
|
| 166/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 27563
output: 26
thoughts: 30
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience, presented in the first person:
**Analyzing the Commit: `cce219b203c4 jfs: add dmapctl integrity check to prevent invalid operations`**
Alright, let's dive into this commit. My initial reaction is that this is potentially quite important. The commit message highlights a crucial aspect: the addition of a `dmapctl` integrity check within JFS. "Preventing invalid operations" is always music to my ears, especially when we're talking about direct map control.
I'm immediately thinking about the potential attack vectors here. Is this aiming to stop corruption due to faulty hardware, or perhaps malicious attempts to manipulate the disk structure through `dmapctl` directly? The phrasing suggests a focus on the integrity of the direct map, which could point to problems arising from inconsistencies or unexpected values within it.
My mind immediately starts running through potential failure modes this is addressing. Are we talking about preventing out-of-bounds access, malformed direct map entries, inconsistent metadata pointers, or perhaps some kind of exploitation through crafted `dmapctl` commands? I'm going to want to see the specific check logic to determine precisely what's being safeguarded against.
This also makes me wonder about the implications for performance. Adding checks, particularly within a utility like `dmapctl`, which is often used for debugging and potentially high-volume operations, could introduce overhead. I'll need to assess the added performance cost, even if it's minor, especially if this check is performed frequently or within a critical path. It's a trade-off between integrity and performance that needs to be carefully evaluated.
Finally, I'll need to examine the specific implementation to see how robust this check is. Does it cover all relevant scenarios? Is it a thorough check or more of a "best-effort" approach? I'd expect some kind of error reporting mechanism or logging to have been integrated, because without actionable information, the check is only half effective. All in all, this has the potential to be a useful and proactive fix, and I look forward to delving deeper.
|
| 167/2 |
2026/08/26 17:58 |
tool |
git-show |
0m
Args:
Results: map[Output:commit cce219b203c4b9cb445e910c7090d1f58af847c5
Author: Yun Zhou <yun.zhou@windriver.com>
Date: Fri Nov 28 23:51:50 2025 +0800
jfs: add dmapctl integrity check to prevent invalid operations
Add check_dmapctl() to validate dmapctl structure integrity, focusing on
preventing invalid operations caused by on-disk corruption.
Key checks:
- nleafs bounded by [0, LPERCTL] (maximum leaf nodes per dmapctl).
- l2nleafs bounded by [0, L2LPERCTL] and consistent with nleafs
(nleafs must be 2^l2nleafs).
- leafidx must be exactly CTLLEAFIND (expected leaf index position).
- height bounded by [0, L2LPERCTL >> 1] (valid tree height range).
- budmin validity: NOFREE only if nleafs=0; otherwise >= BUDMIN.
- Leaf nodes fit within stree array (leafidx + nleafs <= CTLTREESIZE).
- Leaf node values are either non-negative or NOFREE.
Invoked in dbAllocAG(), dbFindCtl(), dbAdjCtl() and dbExtendFS() when
accessing dmapctl pages, catching corruption early before dmap operations
trigger invalid memory access or logic errors.
This fixes the following UBSAN warning.
[58245.668090][T14017] ------------[ cut here ]------------
[58245.668103][T14017] UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:2641:11
[58245.668119][T14017] shift exponent 110 is too large for 32-bit type 'int'
[58245.668137][T14017] CPU: 0 UID: 0 PID: 14017 Comm: 4c1966e88c28fa9 Tainted: G E 6.18.0-rc4-00253-g21ce5d4ba045-dirty #124 PREEMPT_{RT,(full)}
[58245.668174][T14017] Tainted: [E]=UNSIGNED_MODULE
[58245.668176][T14017] Hardware name: QEMU Ubuntu 25.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[58245.668184][T14017] Call Trace:
[58245.668200][T14017] <TASK>
[58245.668208][T14017] dump_stack_lvl+0x189/0x250
[58245.668288][T14017] ? __pfx_dump_stack_lvl+0x10/0x10
[58245.668301][T14017] ? __pfx__printk+0x10/0x10
[58245.668315][T14017] ? lock_metapage+0x303/0x400 [jfs]
[58245.668406][T14017] ubsan_epilogue+0xa/0x40
[58245.668422][T14017] __ubsan_handle_shift_out_of_bounds+0x386/0x410
[58245.668462][T14017] dbSplit+0x1f8/0x200 [jfs]
[58245.668543][T14017] dbAdjCtl+0x34c/0xa20 [jfs]
[58245.668628][T14017] dbAllocNear+0x2ee/0x3d0 [jfs]
[58245.668710][T14017] dbAlloc+0x933/0xba0 [jfs]
[58245.668797][T14017] ea_write+0x374/0xdd0 [jfs]
[58245.668888][T14017] ? __pfx_ea_write+0x10/0x10 [jfs]
[58245.668966][T14017] ? __jfs_setxattr+0x76e/0x1120 [jfs]
[58245.669046][T14017] __jfs_setxattr+0xa01/0x1120 [jfs]
[58245.669135][T14017] ? __pfx___jfs_setxattr+0x10/0x10 [jfs]
[58245.669216][T14017] ? mutex_lock_nested+0x154/0x1d0
[58245.669252][T14017] ? __jfs_xattr_set+0xb9/0x170 [jfs]
[58245.669333][T14017] __jfs_xattr_set+0xda/0x170 [jfs]
[58245.669430][T14017] ? __pfx___jfs_xattr_set+0x10/0x10 [jfs]
[58245.669509][T14017] ? xattr_full_name+0x6f/0x90
[58245.669546][T14017] ? jfs_xattr_set+0x33/0x60 [jfs]
[58245.669636][T14017] ? __pfx_jfs_xattr_set+0x10/0x10 [jfs]
[58245.669726][T14017] __vfs_setxattr+0x43c/0x480
[58245.669743][T14017] __vfs_setxattr_noperm+0x12d/0x660
[58245.669756][T14017] vfs_setxattr+0x16b/0x2f0
[58245.669768][T14017] ? __pfx_vfs_setxattr+0x10/0x10
[58245.669782][T14017] filename_setxattr+0x274/0x600
[58245.669795][T14017] ? __pfx_filename_setxattr+0x10/0x10
[58245.669806][T14017] ? getname_flags+0x1e5/0x540
[58245.669829][T14017] path_setxattrat+0x364/0x3a0
[58245.669840][T14017] ? __pfx_path_setxattrat+0x10/0x10
[58245.669859][T14017] ? __se_sys_chdir+0x1b9/0x280
[58245.669876][T14017] __x64_sys_lsetxattr+0xbf/0xe0
[58245.669888][T14017] do_syscall_64+0xfa/0xfa0
[58245.669901][T14017] ? lockdep_hardirqs_on+0x9c/0x150
[58245.669913][T14017] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f
[58245.669927][T14017] ? exc_page_fault+0xab/0x100
[58245.669937][T14017] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+4c1966e88c28fa96e053@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4c1966e88c28fa96e053
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 2abe8cc02ee6..a841cf21da7d 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -133,6 +133,93 @@ static const s8 budtab[256] = {
2, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, -1
};
+/*
+ * check_dmapctl - Validate integrity of a dmapctl structure
+ * @dcp: Pointer to the dmapctl structure to check
+ *
+ * Return: true if valid, false if corrupted
+ */
+static bool check_dmapctl(struct dmapctl *dcp)
+{
+ s8 budmin = dcp->budmin;
+ u32 nleafs, l2nleafs, leafidx, height;
+ int i;
+
+ nleafs = le32_to_cpu(dcp->nleafs);
+ /* Check basic field ranges */
+ if (unlikely(nleafs > LPERCTL)) {
+ jfs_err("dmapctl: invalid nleafs %u (max %u)",
+ nleafs, LPERCTL);
+ return false;
+ }
+
+ l2nleafs = le32_to_cpu(dcp->l2nleafs);
+ if (unlikely(l2nleafs > L2LPERCTL)) {
+ jfs_err("dmapctl: invalid l2nleafs %u (max %u)",
+ l2nleafs, L2LPERCTL);
+ return false;
+ }
+
+ /* Verify nleafs matches l2nleafs (must be power of two) */
+ if (unlikely((1U << l2nleafs) != nleafs)) {
+ jfs_err("dmapctl: nleafs %u != 2^%u",
+ nleafs, l2nleafs);
+ return false;
+ }
+
+ leafidx = le32_to_cpu(dcp->leafidx);
+ /* Check leaf index matches expected position */
+ if (unlikely(leafidx != CTLLEAFIND)) {
+ jfs_err("dmapctl: invalid leafidx %u (expected %u)",
+ leafidx, CTLLEAFIND);
+ return false;
+ }
+
+ height = le32_to_cpu(dcp->height);
+ /* Check tree height is within valid range */
+ if (unlikely(height > (L2LPERCTL >> 1))) {
+ jfs_err("dmapctl: invalid height %u (max %u)",
+ height, L2LPERCTL >> 1);
+ return false;
+ }
+
+ /* Check budmin is valid (cannot be NOFREE for non-empty tree) */
+ if (budmin == NOFREE) {
+ if (unlikely(nleafs > 0)) {
+ jfs_err("dmapctl: budmin is NOFREE but nleafs %u",
+ nleafs);
+ return false;
+ }
+ } else if (unlikely(budmin < BUDMIN)) {
+ jfs_err("dmapctl: invalid budmin %d (min %d)",
+ budmin, BUDMIN);
+ return false;
+ }
+
+ /* Check leaf nodes fit within stree array */
+ if (unlikely(leafidx + nleafs > CTLTREESIZE)) {
+ jfs_err("dmapctl: leaf range exceeds stree size (end %u > %u)",
+ leafidx + nleafs, CTLTREESIZE);
+ return false;
+ }
+
+ /* Check leaf nodes have valid values */
+ for (i = leafidx; i < leafidx + nleafs; i++) {
+ s8 val = dcp->stree[i];
+
+ if (unlikely(val < NOFREE)) {
+ jfs_err("dmapctl: invalid leaf value %d at index %d",
+ val, i);
+ return false;
+ } else if (unlikely(val > 31)) {
+ jfs_err("dmapctl: leaf value %d too large at index %d", val, i);
+ return false;
+ }
+ }
+
+ return true;
+}
+
/*
* NAME: dbMount()
*
@@ -1372,7 +1459,7 @@ dbAllocAG(struct bmap * bmp, int agno, s64 nblocks, int l2nb, s64 * results)
dcp = (struct dmapctl *) mp->data;
budmin = dcp->budmin;
- if (dcp->leafidx != cpu_to_le32(CTLLEAFIND)) {
+ if (unlikely(!check_dmapctl(dcp))) {
jfs_error(bmp->db_ipbmap->i_sb, "Corrupt dmapctl page\n");
release_metapage(mp);
return -EIO;
@@ -1702,7 +1789,7 @@ static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno)
dcp = (struct dmapctl *) mp->data;
budmin = dcp->budmin;
- if (dcp->leafidx != cpu_to_le32(CTLLEAFIND)) {
+ if (unlikely(!check_dmapctl(dcp))) {
jfs_error(bmp->db_ipbmap->i_sb,
"Corrupt dmapctl page\n");
release_metapage(mp);
@@ -2485,7 +2572,7 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level)
return -EIO;
dcp = (struct dmapctl *) mp->data;
- if (dcp->leafidx != cpu_to_le32(CTLLEAFIND)) {
+ if (unlikely(!check_dmapctl(dcp))) {
jfs_error(bmp->db_ipbmap->i_sb, "Corrupt dmapctl page\n");
release_metapage(mp);
return -EIO;
@@ -3454,6 +3541,11 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks)
return -EIO;
}
l2dcp = (struct dmapctl *) l2mp->data;
+ if (unlikely(!check_dmapctl(l2dcp))) {
+ jfs_error(ipbmap->i_sb, "Corrupt dmapctl page\n");
+ release_metapage(l2mp);
+ return -EIO;
+ }
/* compute start L1 */
k = blkno >> L2MAXL1SIZE;
@@ -3471,6 +3563,10 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks)
if (l1mp == NULL)
goto errout;
l1dcp = (struct dmapctl *) l1mp->data;
+ if (unlikely(!check_dmapctl(l1dcp))) {
+ jfs_error(ipbmap->i_sb, "Corrupt dmapctl page\n");
+ goto errout;
+ }
/* compute start L0 */
j = (blkno & (MAXL1SIZE - 1)) >> L2MAXL0SIZE;
@@ -3484,6 +3580,10 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks)
goto errout;
l1dcp = (struct dmapctl *) l1mp->data;
+ if (unlikely(!check_dmapctl(l1dcp))) {
+ jfs_error(ipbmap->i_sb, "Corrupt dmapctl page\n");
+ goto errout;
+ }
/* compute start L0 */
j = 0;
@@ -3503,6 +3603,10 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks)
if (l0mp == NULL)
goto errout;
l0dcp = (struct dmapctl *) l0mp->data;
+ if (unlikely(!check_dmapctl(l0dcp))) {
+ jfs_error(ipbmap->i_sb, "Corrupt dmapctl page\n");
+ goto errout;
+ }
/* compute start dmap */
i = (blkno & (MAXL0SIZE - 1)) >>
@@ -3518,6 +3622,10 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks)
goto errout;
l0dcp = (struct dmapctl *) l0mp->data;
+ if (unlikely(!check_dmapctl(l0dcp))) {
+ jfs_error(ipbmap->i_sb, "Corrupt dmapctl page\n");
+ goto errout;
+ }
/* compute start dmap */
i = 0;
]
|
| 168/2 |
2026/08/26 17:58 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 33160
output: 919
thoughts: 1407
Thoughts: **On-Disk Structure Validation: A Deep Dive into Preventing Shift-Out-of-Bounds and Corruption**
Okay, so I've been digging into this, and it's clear that the validation of on-disk structures is paramount for robust filesystem operations. We're talking about preventing shift-out-of-bounds errors, data corruption, and potentially security vulnerabilities. My main concern here is to adhere to the established idioms and best practices for validating data from the superblock (or any on-disk source) within the kernel.
First off, it's immediately apparent that the key is **early validation**. Values pulled from disk must be checked immediately after they're read, typically within `fill_super` or `check_sb` routines. This is our first line of defense, preventing bad data from contaminating subsequent calculations or memory accesses. We can catch the problems at the source, rather than having them lead to a crash much later.
Secondly, and this is crucial, **strict bounds checking is mandatory for shift exponents**. Any value used in a bitwise shift has to be rigorously validated against its maximum permitted value. For 32-bit types, that means less than 32, for 64-bit types, less than 64. The provided patch is dead-on in this regard, especially the proposed additions like `befs_sb->ag_shift >= 32`, preventing undefined behavior when using an invalid shift value. We have plenty of precedent for this – the `ocfs2`, `jfs`, and `squashfs` examples are spot-on. We're preventing Undefined Behavior Sanitizer (UBSAN) warnings by adding explicit bounds checks before shift operations.
Third, the handling of validation failures is critical. If we encounter an invalid value that's going to be used in calculations affecting block addresses or other critical structures, it's not a warning. It's a **fatal error** – we must return a sensible error code (like `BEFS_ERR` or `-EINVAL`) and abort the operation. The "proposed fix" understands this perfectly. We are not just going to let the filesystem mount with obviously corrupt values. We need to be able to detect the bad values early, and gracefully abort the operation.
Fourth, when shifting, we need to be aware of how the types interact. Using **unsigned literals** (like `1U` or `1ULL`) is essential to prevent signed integer overflow, which is undefined behavior. Also, and this is important, if we expect a 64-bit result from a 32-bit shift, we *must* cast the value to a 64-bit type *before* the shift (like using `befs_blocknr_t` as is done in the fix). We *cannot* allow the risk of a 32-bit truncation or sign extension. This is where we need to be very precise.
Finally, we need to consider how locking applies. During `fill_super`, the VFS has already allocated the superblock, but it's *not* yet visible to other threads. Therefore, as the findings correctly conclude, no specific locks are required for reading and validating the superblock fields at that point. We can validate the on-disk data in a safe, isolated manner, before the filesystem becomes accessible and shared.
So, the proposed fix is sound. It leverages best practices and well-established idioms within the kernel. The additions are consistent with other filesystem implementations that have faced and resolved these very issues. The changes are aligned with the existing strategies to ensure data integrity and prevent potential errors caused by corrupted on-disk values. It's a solid, pragmatic solution.
|
| 169/1 |
2026/08/26 17:59 |
action |
kernel-scratch-checkouter |
0m
Results: map[KernelScratchSrc:/app/workdir/cache/tmp/tmp614811271]
|
| 170/1 |
2026/08/26 17:59 |
loop |
|
27m
|
| 171/2 |
2026/08/26 17:59 |
iteration |
0 |
27m
|
| 172/3 |
2026/08/26 17:59 |
agent |
patch-generator |
3m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with creating a fix for a kernel bug.
You will be given a crash report, an initial explanation of the root cause done by another
kernel expert, and a summary of how similar bugs were fixed in the past.
Use the codeeditor tool to do code edits.
Note: you will not see your changes when looking at the code using codesearch tools.
Use the patch-diff tool to review the modifications you applied.
Your final reply should contain explanation of what you did in the patch and why
(details not present in the initial explanation of the bug).
Your fix must not just prevent the given crash, but also be the best fix for the underlying
root cause from the software engineering point of view. There can be several ways to fix the
same bug. Consider alternatives, and pick the best one. For example, additional checks may be
added at different locations/functions, it's usually better to place them earlier in the
execution to avoid multiple checks at various locations later.
Frequently the same coding mistake is done in several locations in the source code.
Check if your fix should be extended/applied to similar cases around to fix other similar bugs.
But don't go too wide, don't try to fix problems kernel-wide, fix similar issues
in the same file only.
If you are changing post-conditions of a function, consider all callers of the functions,
and if they need to be updated to handle new post-conditions. For example, if you make
a function that previously never returned a NULL, return NULL, consider if callers
need to be updated to handle NULL return value.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash that corresponds to the bug is:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The explanation of the root cause of the bug is:
An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Historical context on how similar bugs were fixed in the past:
Based on a review of the kernel's git history over the last few years, particularly focusing on how similar `shift-out-of-bounds` and missing validation bugs were fixed in other filesystems (like `ocfs2`, `jfs`, and `squashfs`) as well as historical fixes in `befs`, the proposed fix perfectly aligns with established kernel idioms.
Here is a summary of the common patterns, idioms, and rules that should be followed when writing a fix for this bug:
### 1. Early and Strict Bounds Checking
Values read directly from disk (like superblock fields) are inherently untrusted and must be validated as early as possible, typically in `check_sb` or `fill_super` routines.
- **Prior Art:** In `ocfs2` (commit `23aab037106d`), a very similar UBSAN shift-out-of-bounds bug was fixed by explicitly checking if the shift exponent (`s_blocksize_bits`) was within a valid range (`9` to `12`) before performing the shift (`1 << blksz_bits`). Similarly, in `jfs` (commits `37bfb464ddca` and `cce219b203c4`), extensive bounds checking was added for on-disk values before they were used in shifts or array indexing.
- **Application:** Guarding `befs_sb->block_shift` and `befs_sb->ag_shift` with a `< 32` check before they are used in a shift operation is the correct and standard approach.
### 2. Fatal Errors for Critical Corruption
If an invalid value can cause a crash or undefined behavior later in the filesystem's lifecycle, it must be treated as a fatal error during the mount process, not just a warning.
- **Prior Art:** In `squashfs` (commit `734aa85390ea`), a failure to set the block size correctly resulted in a shift exponent of 64 later on. The fix was to catch the error early and return `-EINVAL` to abort the mount. In `befs` itself (commit `173b066f5826`), a check was added to ensure `sb_min_blocksize` succeeded, aborting the mount if it failed.
- **Application:** Changing the `ag_shift >= 32` check from a "non-fatal consistency check" to a fatal error (returning `BEFS_ERR`) is absolutely necessary. Since `ag_shift` is used in block address resolution (`iaddr2blockno`), allowing a bad value to pass would just defer the crash.
### 3. Preventing Signed Overflow and Truncation
When performing bitwise shifts, the kernel relies on strict type management to avoid undefined behavior and silent data corruption.
- **Unsigned Literals:** Shifting a signed integer (`1`) by 31 bits results in signed integer overflow (Undefined Behavior). Using an unsigned literal (`1U`) is the standard idiom to prevent this.
- **Type Casting Before Shifting:** When a shift operation on a 32-bit variable is expected to yield a 64-bit result, the variable must be explicitly cast to a 64-bit type *before* the shift.
- **Application:** Your secondary finding regarding `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` is spot on. Casting `allocation_group` to `befs_blocknr_t` (which is a 64-bit type) before the shift is the correct idiom to prevent silent 32-bit truncation.
### 4. Locking Rules
During `fill_super` (which calls `befs_check_sb`), the VFS has allocated the superblock, but it is not yet fully initialized or visible to user space/other threads. Therefore, no specific locks (like `s_umount` or internal spinlocks) are required to read or validate these fields. The validation can be done safely lockless.
### Conclusion
Your proposed patch strategy is highly robust and follows the exact same patterns used by filesystem maintainers to fix similar UBSAN shift-out-of-bounds vulnerabilities. You should proceed with submitting the patch series as you have proposed it.
Reply: An analysis of the crash report and the source code reveals that `block_shift` and `ag_shift` values read directly from the filesystem superblock were not validated for maximum bounds prior to performing shift operations (`1 << befs_sb->block_shift` and `1 << befs_sb->ag_shift`). When mounting a corrupt or crafted image where these fields are $\ge 32$, this caused a shift-out-of-bounds undefined behavior (UB), triggering UBSAN panics.
### Summary of Changes
1. **Superblock Validation (`fs/befs/super.c`)**:
- In `befs_check_sb()`, added checks to ensure `block_shift < 32` and `ag_shift < 32` before evaluating the bitwise shifts.
- Changed the literal `1` to `1U` to avoid signed 32-bit integer overflow.
- Treated `ag_shift >= 32` as a fatal error returning `BEFS_ERR`. Because `ag_shift` is subsequently used in address translation helpers (`iaddr2blockno` and `blockno2iaddr`), allowing an invalid shift exponent $\ge 32$ to pass would lead to further shift-out-of-bounds crashes during inode operations (such as reading the root inode during mount).
2. **64-bit Address Calculation Truncation Fix (`fs/befs/befs.h`)**:
- In `iaddr2blockno()` and `blockno2iaddr()`, `iaddr->allocation_group` is a 32-bit `u32`. Left-shifting it by `ag_shift` before promotion evaluated as a 32-bit shift and truncated high bits for large allocation groups. Explicitly cast `allocation_group` to `befs_blocknr_t` (64-bit) prior to shifting.
|
| 173/4 |
2026/08/26 17:59 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 7792
output: 71
thoughts: 66
Thoughts: Okay, let's dive into this. Here's how I'd approach this problem:
**Analyzing and Inspecting BEFS File System Source Code**
Alright, my first instinct is to get a solid grasp on the code in question. I need to understand the specifics of this situation, which means getting my hands dirty with the source. I'm thinking I'll start by reading the relevant BEFS file system files. Specifically, I need to look at `fs/befs/super.c`, `fs/befs/befs.h`, and any other related files in that BEFS directory. Tools like `read-file` or `codesearch-definition-source` will be essential here. I can use these to quickly understand the core structures, functions, and definitions involved in the BEFS implementation. This initial exploration will provide the context I need to thoroughly understand and resolve the identified problem. This granular understanding is key for any deep dive.
|
| 174/4 |
2026/08/26 17:59 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:1 LineCount:100]
Results: map[Contents: 1: /*
2: * super.c
3: *
4: * Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
5: *
6: * Licensed under the GNU GPL. See the file COPYING for details.
7: *
8: */
9:
10: #include <linux/fs.h>
11: #include <asm/page.h> /* for PAGE_SIZE */
12:
13: #include "befs.h"
14: #include "super.h"
15:
16: /*
17: * befs_load_sb -- Read from disk and properly byteswap all the fields
18: * of the befs superblock
19: */
20: int
21: befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
22: {
23: struct befs_sb_info *befs_sb = BEFS_SB(sb);
24:
25: /* Check the byte order of the filesystem */
26: if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_LE)
27: befs_sb->byte_order = BEFS_BYTESEX_LE;
28: else if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_BE)
29: befs_sb->byte_order = BEFS_BYTESEX_BE;
30:
31: befs_sb->magic1 = fs32_to_cpu(sb, disk_sb->magic1);
32: befs_sb->magic2 = fs32_to_cpu(sb, disk_sb->magic2);
33: befs_sb->magic3 = fs32_to_cpu(sb, disk_sb->magic3);
34: befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
36: befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
37: befs_sb->used_blocks = fs64_to_cpu(sb, disk_sb->used_blocks);
38: befs_sb->inode_size = fs32_to_cpu(sb, disk_sb->inode_size);
39:
40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
42: befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
43:
44: befs_sb->flags = fs32_to_cpu(sb, disk_sb->flags);
45:
46: befs_sb->log_blocks = fsrun_to_cpu(sb, disk_sb->log_blocks);
47: befs_sb->log_start = fs64_to_cpu(sb, disk_sb->log_start);
48: befs_sb->log_end = fs64_to_cpu(sb, disk_sb->log_end);
49:
50: befs_sb->root_dir = fsrun_to_cpu(sb, disk_sb->root_dir);
51: befs_sb->indices = fsrun_to_cpu(sb, disk_sb->indices);
52: befs_sb->nls = NULL;
53:
54: return BEFS_OK;
55: }
56:
57: int
58: befs_check_sb(struct super_block *sb)
59: {
60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
61:
62: /* Check magic headers of super block */
63: if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
64: || (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
65: || (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
66: befs_error(sb, "invalid magic header");
67: return BEFS_ERR;
68: }
69:
70: /*
71: * Check blocksize of BEFS.
72: *
73: * Blocksize of BEFS is 1024, 2048, 4096 or 8192.
74: */
75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
]
|
| 175/4 |
2026/08/26 17:59 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:1 LineCount:100]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * befs.h
4: *
5: * Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
6: * Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
7: */
8:
9: #ifndef _LINUX_BEFS_H
10: #define _LINUX_BEFS_H
11:
12: #include "befs_fs_types.h"
13:
14: /* used in debug.c */
15: #define BEFS_VERSION "0.9.3"
16:
17:
18: typedef u64 befs_blocknr_t;
19: /*
20: * BeFS in memory structures
21: */
22:
23: struct befs_mount_options {
24: kgid_t gid;
25: kuid_t uid;
26: int use_gid;
27: int use_uid;
28: int debug;
29: char *iocharset;
30: };
31:
32: struct befs_sb_info {
33: u32 magic1;
34: u32 block_size;
35: u32 block_shift;
36: int byte_order;
37: befs_off_t num_blocks;
38: befs_off_t used_blocks;
39: u32 inode_size;
40: u32 magic2;
41:
42: /* Allocation group information */
43: u32 blocks_per_ag;
44: u32 ag_shift;
45: u32 num_ags;
46:
47: /* State of the superblock */
48: u32 flags;
49:
50: /* Journal log entry */
51: befs_block_run log_blocks;
52: befs_off_t log_start;
53: befs_off_t log_end;
54:
55: befs_inode_addr root_dir;
56: befs_inode_addr indices;
57: u32 magic3;
58:
59: struct befs_mount_options mount_opts;
60: struct nls_table *nls;
61: };
62:
63: struct befs_inode_info {
64: u32 i_flags;
65: u32 i_type;
66:
67: befs_inode_addr i_inode_num;
68: befs_inode_addr i_parent;
69: befs_inode_addr i_attribute;
70:
71: union {
72: befs_data_stream ds;
73: char symlink[BEFS_SYMLINK_LEN];
74: } i_data;
75:
76: struct inode vfs_inode;
77: };
78:
79: enum befs_err {
80: BEFS_OK,
81: BEFS_ERR,
82: BEFS_BAD_INODE,
83: BEFS_BT_END,
84: BEFS_BT_EMPTY,
85: BEFS_BT_MATCH,
86: BEFS_BT_OVERFLOW,
87: BEFS_BT_NOT_FOUND
88: };
89:
90:
91: /****************************/
92: /* debug.c */
93: __printf(2, 3)
94: void befs_error(const struct super_block *sb, const char *fmt, ...);
95: __printf(2, 3)
96: void befs_warning(const struct super_block *sb, const char *fmt, ...);
97: __printf(2, 3)
98: void befs_debug(const struct super_block *sb, const char *fmt, ...);
99:
100: void befs_dump_super_block(const struct super_block *sb, befs_super_block *);
]
|
| 176/4 |
2026/08/26 17:59 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 11106
output: 75
thoughts: 29
Thoughts: Here's my take on the process, framed as a first-person expert perspective:
**Diving into BEFS Superblock and Header Structures**
Okay, time to get a solid grasp of how this BEFS file system actually works at its core. I'm going to start by reading the remaining code in `fs/befs/super.c` and then I'll look at `fs/befs/befs.h`. I'm especially interested in the superblock's structure. Understanding the superblock is paramount – it's the heart of any file system. That includes metadata about the file system, free space management, and critical pointers to other essential data structures. I'll need to see how the BEFS superblock stores things like the file system's ID, its version, volume name, flags, and most importantly, the key pointers to things like the root directory inode, free block lists, and any other vital metadata structures. The header file should give me the explicit definition of the `struct befs_super_block` which will be really helpful. Knowing this, I expect the header file to expose structure definitions, enumeration, constants, and other elements.
|
| 177/4 |
2026/08/26 17:59 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:100 LineCount:100]
Results: map[Contents: 100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 178/4 |
2026/08/26 17:59 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:100 LineCount:100]
Results: map[Contents: 100: void befs_dump_super_block(const struct super_block *sb, befs_super_block *);
101: void befs_dump_inode(const struct super_block *sb, befs_inode *);
102: void befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super *);
103: void befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead *);
104: /****************************/
105:
106:
107: /* Gets a pointer to the private portion of the super_block
108: * structure from the public part
109: */
110: static inline struct befs_sb_info *
111: BEFS_SB(const struct super_block *super)
112: {
113: return (struct befs_sb_info *) super->s_fs_info;
114: }
115:
116: static inline struct befs_inode_info *
117: BEFS_I(const struct inode *inode)
118: {
119: return container_of(inode, struct befs_inode_info, vfs_inode);
120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
145: return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
146: }
147:
148: #include "endian.h"
149:
150: #endif /* _LINUX_BEFS_H */
]
|
| 179/4 |
2026/08/26 17:59 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 12570
output: 39
thoughts: 37
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Investigating BEFS Parameter Usage**
Right, so I'm thinking, beyond just understanding what these parameters (`ag_shift`, `block_shift`, `blocks_per_ag`) *are*, I need to see how they're actually employed within the BEFS file system code. Just knowing their definitions isn't enough; I need to understand the context of their usage to truly grasp their implications. To that end, I'm going to launch a search across the entire `fs/befs/` directory to track down every instance where those variables are used. Seeing them in the wild, so to speak, will paint a much clearer picture of their function and relationship to the overall BEFS architecture. This will probably involve grepping or something similar to find all occurrences of those variable names within the codebase. Time to get down to the nitty-gritty.
|
| 180/4 |
2026/08/26 17:59 |
tool |
grepper |
0m
Args: map[Expression:(ag_shift|block_shift|blocks_per_ag) PathPrefix:fs/befs]
Results: map[Output:fs/befs/ChangeLog=204=Version 0.4 (2001-10-28)
--
fs/befs/ChangeLog-362-* Added additional consitency checks on mount
fs/befs/ChangeLog:363: Check block_size agrees with block_shift
fs/befs/ChangeLog-364- Check flags == BEFS_CLEAN
--
fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-34- u32 block_size;
fs/befs/befs.h:35: u32 block_shift;
fs/befs/befs.h-36- int byte_order;
--
fs/befs/befs.h-42- /* Allocation group information */
fs/befs/befs.h:43: u32 blocks_per_ag;
fs/befs/befs.h:44: u32 ag_shift;
fs/befs/befs.h-45- u32 num_ags;
--
fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-118- fs32 block_size;
fs/befs/befs_fs_types.h:119: fs32 block_shift;
fs/befs/befs_fs_types.h-120-
--
fs/befs/befs_fs_types.h-126- fs32 magic2;
fs/befs/befs_fs_types.h:127: fs32 blocks_per_ag;
fs/befs/befs_fs_types.h:128: fs32 ag_shift;
fs/befs/befs_fs_types.h-129- fs32 num_ags;
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-56- befs_debug(sb, "---> %s %llu", __func__, pos);
fs/befs/datastream.c:57: block = pos >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-58- if (off)
fs/befs/datastream.c:59: *off = pos - (block << BEFS_SB(sb)->block_shift);
fs/befs/datastream.c-60-
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.c-98- int err;
fs/befs/datastream.c:99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-100-
--
fs/befs/datastream.c=172=befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
--
fs/befs/datastream.c-180-
fs/befs/datastream.c:181: datablocks = ds->size >> befs_sb->block_shift;
fs/befs/datastream.c-182- if (ds->size & (befs_sb->block_size - 1))
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-322-
fs/befs/datastream.c:323: indir_start_blk = data->max_direct_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-324- search_blk = blockno - indir_start_blk;
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-433- befs_blocknr_t indir_start_blk =
fs/befs/datastream.c:434: data->max_indirect_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-435-
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-169- befs_debug(sb, " block_size %u", fs32_to_cpu(sb, sup->block_size));
fs/befs/debug.c:170: befs_debug(sb, " block_shift %u", fs32_to_cpu(sb, sup->block_shift));
fs/befs/debug.c-171-
--
fs/befs/debug.c-176- befs_debug(sb, " magic2 %08x", fs32_to_cpu(sb, sup->magic2));
fs/befs/debug.c:177: befs_debug(sb, " blocks_per_ag %u",
fs/befs/debug.c:178: fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c:179: befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c-180- befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-34- befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
fs/befs/super.c:35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
fs/befs/super.c-36- befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
--
fs/befs/super.c-39-
fs/befs/super.c:40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c:41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c-42- befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-91- /*
fs/befs/super.c:92: * block_shift and block_size encode the same information
fs/befs/super.c-93- * in different ways as a consistency check.
--
fs/befs/super.c-95-
fs/befs/super.c:96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
fs/befs/super.c:97: befs_error(sb, "block_shift disagrees with block_size. "
fs/befs/super.c-98- "Corruption likely.");
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 181/4 |
2026/08/26 17:59 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 15324
output: 38
thoughts: 41
Thoughts: Okay, let's dive into this. Here's my take on examining `fs/befs/linuxvfs.c`, focusing on the interactions of `befs_check_sb` and `befs_sb_info`:
**Analyzing BEFS Superblock Checks and Data Structures**
Right, so I'm thinking, let's pull up `fs/befs/linuxvfs.c`. I need to refresh my memory on the superblock handling in BEFS. My immediate concern is understanding *precisely* how `befs_check_sb` gets invoked – the entry points, the conditions... Is it during mount, remount, or something else entirely? I need to clarify the call stack and any potential race conditions involved.
Once I have a clear picture of how `befs_check_sb` is called, I need to understand its role. What specific consistency checks is it performing on the BEFS superblock? Are there potential areas for improvement in these checks, perhaps more robust error handling or more granular validations? Thinking about things like journal replay... Does it handle that effectively?
Then, the critical part: how is `befs_sb_info` utilized? That's the superblock information structure, right? I want to see how `befs_check_sb` populates it and how other functions within the BEFS filesystem code leverage that information. Is there any redundancy? Are there any potentially expensive calculations performed unnecessarily? Any of that information cache properly? How is the superblock info used by later operations? I need to understand data dependencies to evaluate the whole flow clearly. My goal is to map the data flow and identify any potential performance bottlenecks or subtle inconsistencies in that data flow. Ultimately, it should be possible to make some suggestions for optimization. I should be able to identify any areas for simplification or potential for introducing more parallelism, right?
|
| 182/4 |
2026/08/26 17:59 |
tool |
read-file |
0m
Args: map[File:fs/befs/linuxvfs.c FirstLine:820 LineCount:80]
Results: map[Contents: 820: befs_error(sb, "unable to set blocksize");
821: goto unacquire_priv_sbp;
822: }
823:
824: bh = sb_bread(sb, sb_block);
825: if (!bh) {
826: if (!silent)
827: befs_error(sb, "unable to read superblock");
828: goto unacquire_priv_sbp;
829: }
830:
831: /* account for offset of super block on x86 */
832: disk_sb = (befs_super_block *) bh->b_data;
833: if ((disk_sb->magic1 == BEFS_SUPER_MAGIC1_LE) ||
834: (disk_sb->magic1 == BEFS_SUPER_MAGIC1_BE)) {
835: befs_debug(sb, "Using PPC superblock location");
836: } else {
837: befs_debug(sb, "Using x86 superblock location");
838: disk_sb =
839: (befs_super_block *) ((void *) bh->b_data + x86_sb_off);
840: }
841:
842: if ((befs_load_sb(sb, disk_sb) != BEFS_OK) ||
843: (befs_check_sb(sb) != BEFS_OK))
844: goto unacquire_bh;
845:
846: befs_dump_super_block(sb, disk_sb);
847:
848: brelse(bh);
849:
850: if (befs_sb->num_blocks > ~((sector_t)0)) {
851: if (!silent)
852: befs_error(sb, "blocks count: %llu is larger than the host can use",
853: befs_sb->num_blocks);
854: goto unacquire_priv_sbp;
855: }
856:
857: /*
858: * set up enough so that it can read an inode
859: * Fill in kernel superblock fields from private sb
860: */
861: sb->s_magic = BEFS_SUPER_MAGIC;
862: /* Set real blocksize of fs */
863: if (!sb_set_blocksize(sb, (ulong) befs_sb->block_size))
864: goto unacquire_priv_sbp;
865: sb->s_op = &befs_sops;
866: sb->s_export_op = &befs_export_operations;
867: sb->s_time_min = 0;
868: sb->s_time_max = 0xffffffffffffll;
869: root = befs_iget(sb, iaddr2blockno(sb, &(befs_sb->root_dir)));
870: if (IS_ERR(root)) {
871: ret = PTR_ERR(root);
872: goto unacquire_priv_sbp;
873: }
874: sb->s_root = d_make_root(root);
875: if (!sb->s_root) {
876: if (!silent)
877: befs_error(sb, "get root inode failed");
878: goto unacquire_priv_sbp;
879: }
880:
881: /* load nls library */
882: if (befs_sb->mount_opts.iocharset) {
883: befs_debug(sb, "Loading nls: %s",
884: befs_sb->mount_opts.iocharset);
885: befs_sb->nls = load_nls(befs_sb->mount_opts.iocharset);
886: if (!befs_sb->nls) {
887: befs_warning(sb, "Cannot load nls %s"
888: " loading default nls",
889: befs_sb->mount_opts.iocharset);
890: befs_sb->nls = load_nls_default();
891: }
892: /* load default nls if none is specified in mount options */
893: } else {
894: befs_debug(sb, "Loading default nls");
895: befs_sb->nls = load_nls_default();
896: }
897:
898: return 0;
899:
]
|
| 183/4 |
2026/08/26 17:59 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 17113
output: 40
thoughts: 310
Thoughts: **Analyzing a Potential Integer Overflow in BEFS Filesystem Initialization**
Okay, so I'm digging into this BEFS code, specifically looking at line 869 in `fs/befs/linuxvfs.c`. I see `befs_iget` being called right after the mount, and crucially, it's using the result of `iaddr2blockno(sb, &(befs_sb->root_dir))`. Aha, that `iaddr2blockno` function is the key here.
Now, inside `iaddr2blockno`, I spot this bitwise left-shift operation: `(iaddr->allocation_group << BEFS_SB(sb)->ag_shift)`. Immediately, my expert Spidey-sense tingles. If `ag_shift` is 32 or greater, we have an undefined behavior situation on our hands. Shifting by the word size is, well, bad news. And even *if* `ag_shift` is less than 32, if `iaddr->allocation_group` is a `u32` (which I strongly suspect it is, given the context), the left shift will *definitely* overflow *before* the addition or promotion to a `befs_blocknr_t` (which I assume is a `u64`). That means we're going to lose information. We're potentially calculating the root block number incorrectly. That is not good!
Alright, time to confirm my suspicion about the data types. Let's go check the definition of `befs_inode_addr`. I need to look at `fs/befs/befs_fs_types.h` and verify those crucial field types. I need to know what `iaddr->allocation_group` actually *is*.
|
| 184/4 |
2026/08/26 18:00 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:1 LineCount:100]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * fs/befs/befs_fs_types.h
4: *
5: * Copyright (C) 2001 Will Dyson (will@cs.earlham.edu)
6: *
7: *
8: *
9: * from linux/include/linux/befs_fs.h
10: *
11: * Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
12: *
13: */
14:
15: #ifndef _LINUX_BEFS_FS_TYPES
16: #define _LINUX_BEFS_FS_TYPES
17:
18: #ifdef __KERNEL__
19: #include <linux/types.h>
20: #endif /*__KERNEL__*/
21:
22: #define PACKED __attribute__ ((__packed__))
23:
24: /*
25: * Max name lengths of BFS
26: */
27:
28: #define BEFS_NAME_LEN 255
29:
30: #define BEFS_SYMLINK_LEN 144
31: #define BEFS_NUM_DIRECT_BLOCKS 12
32: #define B_OS_NAME_LENGTH 32
33:
34: /* The datastream blocks mapped by the double-indirect
35: * block are always 4 fs blocks long.
36: * This eliminates the need for linear searches among
37: * the potentially huge number of indirect blocks
38: *
39: * Err. Should that be 4 fs blocks or 4k???
40: * It matters on large blocksize volumes
41: */
42: #define BEFS_DBLINDIR_BRUN_LEN 4
43:
44: /*
45: * Flags of superblock
46: */
47:
48: enum super_flags {
49: BEFS_BYTESEX_BE,
50: BEFS_BYTESEX_LE,
51: BEFS_CLEAN = 0x434c454e,
52: BEFS_DIRTY = 0x44495254,
53: BEFS_SUPER_MAGIC1 = 0x42465331, /* BFS1 */
54: BEFS_SUPER_MAGIC2 = 0xdd121031,
55: BEFS_SUPER_MAGIC3 = 0x15b6830e,
56: };
57:
58: #define BEFS_BYTEORDER_NATIVE 0x42494745
59: #define BEFS_BYTEORDER_NATIVE_LE ((__force fs32)cpu_to_le32(BEFS_BYTEORDER_NATIVE))
60: #define BEFS_BYTEORDER_NATIVE_BE ((__force fs32)cpu_to_be32(BEFS_BYTEORDER_NATIVE))
61:
62: #define BEFS_SUPER_MAGIC BEFS_SUPER_MAGIC1
63: #define BEFS_SUPER_MAGIC1_LE ((__force fs32)cpu_to_le32(BEFS_SUPER_MAGIC1))
64: #define BEFS_SUPER_MAGIC1_BE ((__force fs32)cpu_to_be32(BEFS_SUPER_MAGIC1))
65:
66: /*
67: * Flags of inode
68: */
69:
70: #define BEFS_INODE_MAGIC1 0x3bbe0ad9
71:
72: enum inode_flags {
73: BEFS_INODE_IN_USE = 0x00000001,
74: BEFS_ATTR_INODE = 0x00000004,
75: BEFS_INODE_LOGGED = 0x00000008,
76: BEFS_INODE_DELETED = 0x00000010,
77: BEFS_LONG_SYMLINK = 0x00000040,
78: BEFS_PERMANENT_FLAG = 0x0000ffff,
79: BEFS_INODE_NO_CREATE = 0x00010000,
80: BEFS_INODE_WAS_WRITTEN = 0x00020000,
81: BEFS_NO_TRANSACTION = 0x00040000,
82: };
83: /*
84: * On-Disk datastructures of BeFS
85: */
86:
87: typedef u64 __bitwise fs64;
88: typedef u32 __bitwise fs32;
89: typedef u16 __bitwise fs16;
90:
91: typedef u64 befs_off_t;
92: typedef fs64 befs_time_t;
93:
94: /* Block runs */
95: typedef struct {
96: fs32 allocation_group;
97: fs16 start;
98: fs16 len;
99: } PACKED befs_disk_block_run;
100:
]
|
| 185/4 |
2026/08/26 18:00 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 19373
output: 41
thoughts: 46
Thoughts: Okay, let's dive into this. I need to get a handle on the interaction between blocks and inodes in the BEFS filesystem implementation. To do that efficiently, I'll start by checking the relevant definitions. My intuition suggests `befs_block_run` and `befs_inode_addr` in `befs_fs_types.h` will be key. Time to get straight to it. Let me jump to lines 100-160 in that header file. That should give me a solid overview of how these two structures relate and how they're used. I'll focus on understanding the data structures and how the addresses are calculated/stored. This should provide a good mental map of the core components.
|
| 186/4 |
2026/08/26 18:00 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:100 LineCount:60]
Results: map[Contents: 100:
101: typedef struct {
102: u32 allocation_group;
103: u16 start;
104: u16 len;
105: } PACKED befs_block_run;
106:
107: typedef befs_disk_block_run befs_disk_inode_addr;
108: typedef befs_block_run befs_inode_addr;
109:
110: /*
111: * The Superblock Structure
112: */
113: typedef struct {
114: char name[B_OS_NAME_LENGTH];
115: fs32 magic1;
116: fs32 fs_byte_order;
117:
118: fs32 block_size;
119: fs32 block_shift;
120:
121: fs64 num_blocks;
122: fs64 used_blocks;
123:
124: fs32 inode_size;
125:
126: fs32 magic2;
127: fs32 blocks_per_ag;
128: fs32 ag_shift;
129: fs32 num_ags;
130:
131: fs32 flags;
132:
133: befs_disk_block_run log_blocks;
134: fs64 log_start;
135: fs64 log_end;
136:
137: fs32 magic3;
138: befs_disk_inode_addr root_dir;
139: befs_disk_inode_addr indices;
140:
141: } PACKED befs_super_block;
142:
143: /*
144: * Note: the indirect and dbl_indir block_runs may
145: * be longer than one block!
146: */
147: typedef struct {
148: befs_disk_block_run direct[BEFS_NUM_DIRECT_BLOCKS];
149: fs64 max_direct_range;
150: befs_disk_block_run indirect;
151: fs64 max_indirect_range;
152: befs_disk_block_run double_indirect;
153: fs64 max_double_indirect_range;
154: fs64 size;
155: } PACKED befs_disk_data_stream;
156:
157: typedef struct {
158: befs_block_run direct[BEFS_NUM_DIRECT_BLOCKS];
159: befs_off_t max_direct_range;
]
|
| 187/4 |
2026/08/26 18:00 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 20426
output: 36
thoughts: 830
Thoughts: **Analyzing BEFS Block Number Conversions**
Okay, let's dive into these BEFS block number conversions. First, I need to understand how `iaddr2blockno` and `blockno2iaddr` are implemented. From `fs/befs/befs.h`, I see the definitions:
```c
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
```
Now, let's focus on `blockno2iaddr`. I notice a potential area for optimization or clarity. Specifically, the line calculating `iaddr.start`:
`iaddr.start = blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);`
My initial thought is, if `iaddr.allocation_group` is a `u32`, couldn't the shift `(iaddr.allocation_group << BEFS_SB(sb)->ag_shift)` implicitly perform a 32-bit shift before subtraction? Then, I realize that the cast to `(befs_blocknr_t)` ensures a 64-bit shift and subtract. The cast is cleaner and consistent. Alternatively, the same result could be achieved with `blockno & ((1ULL << BEFS_SB(sb)->ag_shift) - 1)` or `blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift)`.
So, the casting makes sense for ensuring a correct 64-bit operation, considering the underlying data types. I'm satisfied with this implementation for now.
Now, I'd like to check for similar shift operations using `block_shift` and `ag_shift` elsewhere in `fs/befs/`. I'll review every instance, and make sure to read `fs/befs/datastream.c` line 40-120.
|
| 188/4 |
2026/08/26 18:00 |
tool |
read-file |
0m
Args: map[File:fs/befs/datastream.c FirstLine:40 LineCount:80]
Results: map[Contents: 40: * @sb: Filesystem superblock
41: * @ds: datastream to find data with
42: * @pos: start of data
43: * @off: offset of data in buffer_head->b_data
44: *
45: * Returns pointer to buffer_head containing data starting with offset @off,
46: * if you don't need to know offset just set @off = NULL.
47: */
48: struct buffer_head *
49: befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
50: befs_off_t pos, uint *off)
51: {
52: struct buffer_head *bh;
53: befs_block_run run;
54: befs_blocknr_t block; /* block coresponding to pos */
55:
56: befs_debug(sb, "---> %s %llu", __func__, pos);
57: block = pos >> BEFS_SB(sb)->block_shift;
58: if (off)
59: *off = pos - (block << BEFS_SB(sb)->block_shift);
60:
61: if (befs_fblock2brun(sb, ds, block, &run) != BEFS_OK) {
62: befs_error(sb, "BeFS: Error finding disk addr of block %lu",
63: (unsigned long)block);
64: befs_debug(sb, "<--- %s ERROR", __func__);
65: return NULL;
66: }
67: bh = befs_bread_iaddr(sb, run);
68: if (!bh) {
69: befs_error(sb, "BeFS: Error reading block %lu from datastream",
70: (unsigned long)block);
71: return NULL;
72: }
73:
74: befs_debug(sb, "<--- %s read data, starting at %llu", __func__, pos);
75:
76: return bh;
77: }
78:
79: /**
80: * befs_fblock2brun - give back block run for fblock
81: * @sb: the superblock
82: * @data: datastream to read from
83: * @fblock: the blocknumber with the file position to find
84: * @run: The found run is passed back through this pointer
85: *
86: * Takes a file position and gives back a brun who's starting block
87: * is block number fblock of the file.
88: *
89: * Returns BEFS_OK or BEFS_ERR.
90: *
91: * Calls specialized functions for each of the three possible
92: * datastream regions.
93: */
94: int
95: befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
96: befs_blocknr_t fblock, befs_block_run *run)
97: {
98: int err;
99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
100:
101: if (pos < data->max_direct_range) {
102: err = befs_find_brun_direct(sb, data, fblock, run);
103:
104: } else if (pos < data->max_indirect_range) {
105: err = befs_find_brun_indirect(sb, data, fblock, run);
106:
107: } else if (pos < data->max_double_indirect_range) {
108: err = befs_find_brun_dblindirect(sb, data, fblock, run);
109:
110: } else {
111: befs_error(sb,
112: "befs_fblock2brun() was asked to find block %lu, "
113: "which is not mapped by the datastream\n",
114: (unsigned long)fblock);
115: err = BEFS_ERR;
116: }
117: return err;
118: }
119:
]
|
| 189/4 |
2026/08/26 18:00 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 23135
output: 111
thoughts: 51
Thoughts: Okay, let's see what's going on with these `datastream.c` uses. I need to refresh my memory on how this code handles the data streams within the BEFS filesystem. I'll take a quick look at lines 170-190, 315-335, and 425-445. I'm expecting to see how the code is interacting with the underlying structures, particularly in terms of reading and writing operations. Knowing this will give me a better understanding of potential bottlenecks, race conditions or performance issues. I will start by seeing how the data stream is setup and used, and then how data is read/written to it.
|
| 190/4 |
2026/08/26 18:01 |
tool |
read-file |
0m
Args: map[File:fs/befs/datastream.c FirstLine:170 LineCount:25]
Results: map[Contents: 170:
171: befs_blocknr_t
172: befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
173: {
174: befs_blocknr_t blocks;
175: befs_blocknr_t datablocks; /* File data blocks */
176: befs_blocknr_t metablocks; /* FS metadata blocks */
177: struct befs_sb_info *befs_sb = BEFS_SB(sb);
178:
179: befs_debug(sb, "---> %s", __func__);
180:
181: datablocks = ds->size >> befs_sb->block_shift;
182: if (ds->size & (befs_sb->block_size - 1))
183: datablocks += 1;
184:
185: metablocks = 1; /* Start with 1 block for inode */
186:
187: /* Size of indirect block */
188: if (ds->size > ds->max_direct_range)
189: metablocks += ds->indirect.len;
190:
191: /*
192: * Double indir block, plus all the indirect blocks it maps.
193: * In the double-indirect range, all block runs of data are
194: * BEFS_DBLINDIR_BRUN_LEN blocks long. Therefore, we know
]
|
| 191/4 |
2026/08/26 18:01 |
tool |
read-file |
0m
Args: map[File:fs/befs/datastream.c FirstLine:315 LineCount:25]
Results: map[Contents: 315: befs_disk_block_run *array;
316:
317: befs_block_run indirect = data->indirect;
318: befs_blocknr_t indirblockno = iaddr2blockno(sb, &indirect);
319: int arraylen = befs_iaddrs_per_block(sb);
320:
321: befs_debug(sb, "---> %s, find %lu", __func__, (unsigned long)blockno);
322:
323: indir_start_blk = data->max_direct_range >> BEFS_SB(sb)->block_shift;
324: search_blk = blockno - indir_start_blk;
325:
326: /* Examine blocks of the indirect run one at a time */
327: for (i = 0; i < indirect.len; i++) {
328: indirblock = sb_bread(sb, indirblockno + i);
329: if (indirblock == NULL) {
330: befs_error(sb, "---> %s failed to read "
331: "disk block %lu from the indirect brun",
332: __func__, (unsigned long)indirblockno + i);
333: befs_debug(sb, "<--- %s ERROR", __func__);
334: return BEFS_ERR;
335: }
336:
337: array = (befs_disk_block_run *) indirblock->b_data;
338:
339: for (j = 0; j < arraylen; ++j) {
]
|
| 192/4 |
2026/08/26 18:01 |
tool |
read-file |
0m
Args: map[File:fs/befs/datastream.c FirstLine:425 LineCount:25]
Results: map[Contents: 425: int block_indx;
426: off_t dblindir_leftover;
427: befs_blocknr_t blockno_at_run_start;
428: struct buffer_head *dbl_indir_block;
429: struct buffer_head *indir_block;
430: befs_block_run indir_run;
431: befs_disk_inode_addr *iaddr_array;
432:
433: befs_blocknr_t indir_start_blk =
434: data->max_indirect_range >> BEFS_SB(sb)->block_shift;
435:
436: off_t dbl_indir_off = blockno - indir_start_blk;
437:
438: /* number of data blocks mapped by each of the iaddrs in
439: * the indirect block pointed to by the double indirect block
440: */
441: size_t iblklen = BEFS_DBLINDIR_BRUN_LEN;
442:
443: /* number of data blocks mapped by each of the iaddrs in
444: * the double indirect block
445: */
446: size_t diblklen = iblklen * befs_iaddrs_per_block(sb)
447: * BEFS_DBLINDIR_BRUN_LEN;
448:
449: befs_debug(sb, "---> %s find %lu", __func__, (unsigned long)blockno);
]
|
| 193/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 24778
output: 20
thoughts: 2391
Thoughts: **Analyzing the BeFS Superblock Checks**
Okay, let's break this down. We're looking at `fs/befs/super.c` and specifically the `befs_check_sb()` function. The primary focus is validating the superblock's integrity, ensuring the BeFS filesystem is correctly formatted and consistent. First, we check the magic headers. Simple enough. Then, we check the block size. Valid block sizes are constrained to 1024, 2048, 4096, or 8192, and of course, must be less than or equal to the system page size to avoid issues.
Now, here's where it gets interesting: the consistency checks for `block_shift` and `ag_shift`. The original code checks if `(1 << befs_sb->block_shift)` equals `befs_sb->block_size`. However, we need to consider potential integer overflow with left bit shifting. If `block_shift` is 32 or greater, this is undefined behavior and leads to undefined behavior. The proposed fix, explicitly checking `befs_sb->block_shift >= 32 || (1U << befs_sb->block_shift) != befs_sb->block_size`, is *much* better. It explicitly avoids the undefined behavior and ensures the check is safe and correct, especially since the valid `block_size` values imply an upper bound on the valid values of `block_shift`.
Now, onto `ag_shift`. Similar to `block_shift`, `ag_shift` is also a u32, and it represents $\log_2(\text{blocks\_per\_ag})$. The size of allocation groups in BeFS is usually a power of 2, like 8192, 16384, or 65536 blocks. `ag_shift` is crucial in calculating block numbers from inode addresses, and vice-versa, specifically, `iaddr->allocation_group << BEFS_SB(sb)->ag_shift`. This is where the core problem lies: If `ag_shift` is 32 or greater, the left-shift results in overflow, and the filesystem will crash. The original code had a *non-fatal* check: `if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)`. However, we've already established in the context that if `ag_shift` is 32 or greater, it *must* be considered a fatal error to prevent later crashes. We must return `BEFS_ERR` in that case, and the patch correctly addresses this. Furthermore, if the size represented by `ag_shift` doesn't match `blocks_per_ag`, that should also be a warning, but also not be a fatal error, which the updated patch implements. So, the patch which changes the `ag_shift` check to `if (befs_sb->ag_shift >= 32) { ... return BEFS_ERR; } if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)` is the correct solution. Let's see how this fix is integrated in the codebase.
|
| 194/4 |
2026/08/26 18:01 |
tool |
git-log |
0m
Args:
Results: map[Output:7597d42a2533 befs: handle set_blocksize failures
0b2600f81cef treewide: change inode->i_ino from unsigned long to u64
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
ca4388bf1d9e fs: add setlease to generic_ro_fops and read-only filesystem directory operations
b4dbfd8653b3 Coccinelle-based conversion to use ->i_state accessors
c3099e72bf4f befs: convert befs to use the new mount api
263cf5780497 befs: Convert befs_symlink_read_folio() to use folio_end_read()
f88c3fb81c4b mm, slab: remove last vestiges of SLAB_MEM_SPREAD
f6c8bfcf951f befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
]
|
| 195/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 28185
output: 24
thoughts: 21
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving Deep into the BEFS Filesystem History**
Okay, time to dig deeper. I'm thinking, let's go back and examine the commit history specifically for `fs/befs/super.c`. There's probably something lurking there that might give me a clue about the current issue I'm facing. I'm going to run `git log` and hone in on that particular file. Hopefully, this will uncover changes, refactors, or perhaps even introduce bugs that relate to the current behavior. I'm expecting to find some crucial context related to the super block implementation, and that should help me understand the root cause of what I'm dealing with. Let's see what's in store.
|
| 196/4 |
2026/08/26 18:01 |
tool |
git-log |
0m
Args: map[PathPrefix:fs/befs/super.c]
Results: map[Output:103c0fb3400b befs: fix style issues in super.c
11674239f927 befs: fix comment style
bbe1bd0b6bba befs: add check for ag_shift in superblock
6ea4558f9b37 befs: add flags field to validate superblock state
10145d611632 befs: fix function name in documentation
038428fcf7f0 befs: replace typedef befs_sb_info by structure
2b3fffefea99 befs: fix build on parisc
152b95a1ed49 befs: annotate fs32 on tests for superblock endianness
af10b0084dff [PATCH] befs: prepare to sanitizing headers
1da177e4c3f4 Linux-2.6.12-rc2
]
|
| 197/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 28630
output: 23
thoughts: 31
Thoughts: Okay, here's my interpretation of that line of thought, rendered as though it's coming from me:
**Diving into the Code**
Alright, that `bbe1bd0b6bba` commit is catching my eye. Let's see what that particular one is all about. Time to fire up `git show bbe1bd0b6bba` and get a detailed look at what changes were made in that commit. Gotta understand the context and the rationale behind that specific revision. Let's see what gems are hidden in there. Hopefully the commit message is helpful!
|
| 198/4 |
2026/08/26 18:01 |
tool |
git-show |
0m
Args:
Results: map[Output:commit bbe1bd0b6bba138eaf441c6c964bde9866da8808
Author: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Tue Aug 9 22:23:36 2016 +0100
befs: add check for ag_shift in superblock
ag_shift and blocks_per_ag contain the same information in different ways,
same as block_shift and block_size do. It is worth checking this two are
consistent, but since blocks_per_ag isn't documented as mandatory to use
some implementations of befs don't enforce this, so making it non-fatal if
they don't match and just having it as a warning.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
diff --git a/fs/befs/super.c b/fs/befs/super.c
index dc13df8de3e8..c36745d2b45f 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -103,6 +103,13 @@ befs_check_sb(struct super_block *sb)
return BEFS_ERR;
}
+
+ /* ag_shift also encodes the same information as blocks_per_ag in a
+ * different way, non-fatal consistency check
+ */
+ if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
+
if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
]
|
| 199/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 29355
output: 22
thoughts: 2372
Thoughts: **Analysis of Commit `bbe1bd0b6bba` and Implications for BeFS Metadata**
Okay, so I'm looking at commit `bbe1bd0b6bba`, and I see a change that makes me raise an eyebrow. The core of it seems to be about ensuring consistency between `ag_shift` and `blocks_per_ag`, which I know are related in the BeFS superblock. The code aims to verify that these values are consistent, but the original implementation had some serious potential issues with bit shifting and integer overflow.
My initial thoughts are that the commit attempts to address a potential UB caused by an unchecked bit shift. Specifically, a shift operation like `1 << befs_sb->ag_shift` didn't have a check on `ag_shift`, which could lead to undefined behavior if `ag_shift` was 32 or greater (or, if it's a signed integer). If `ag_shift` is large, like 32 or greater, this could result in UB. The fix involves using `1U` to avoid signed integer overflow.
But then, I start thinking deeper. Where is `ag_shift` actually *used*? I immediately jump to the `iaddr2blockno` and `blockno2iaddr` functions. And I see it: `ag_shift` is *critical* for block address calculations. Specifically the calculation:
```c
(((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
and
```c
blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift)
```
I begin to consider the on-disk structures. If `ag_shift` is excessively large (greater or equal to 32 bits), the addresses become completely wrong. The `start` field, being only 16 bits, dictates that the allocation group (AG) can have at most `1 << 16` blocks. So, anything greater than that just doesn't make sense. If `ag_shift` is 32 or greater, it effectively breaks the file system mount, and we must return an error.
The implications are clear: we *must* have a sanity check. If `befs_sb->ag_shift` is 32 or larger, it's a fatal error, and mounting must be aborted, since addresses cannot be correctly calculated. The code *should* be modified to include a check to return `BEFS_ERR` if `ag_shift >= 32`!
And then I get back to the original commit. It's now checking, `if (befs_sb->ag_shift >= 32)`. If it is, then an error is logged, and BEFS_ERR is returned. The commit checks to make sure `block_shift` is valid.
I am now looking back at the original functions `iaddr2blockno` and `blockno2iaddr`, in `fs/befs/befs.h`. I now consider the potential size of variables. The current implementation in `iaddr2blockno` and `blockno2iaddr` are as follows:
```c
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
```
If `iaddr->allocation_group` is 32 bits, the shift `iaddr->allocation_group << BEFS_SB(sb)->ag_shift` can cause a loss of precision, as shifts are computed as 32-bit operations, so only the lower 32 bits are kept. Similarly in `blockno2iaddr`. I then check if there any more places were shifts or arithmetic is done. The best approach is to scan all of the files in the `fs/befs/`
|
| 200/4 |
2026/08/26 18:01 |
tool |
codesearch-dir-index |
0m
Args:
Results: map[Files:[befs.h befs_fs_types.h btree.c btree.h datastream.c datastream.h debug.c endian.h inode.c inode.h io.c io.h linuxvfs.c super.c super.h] Subdirs:<nil>]
|
| 201/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 32887
output: 25
thoughts: 56
Thoughts: **Investigating Potential Data Corruption in BEFS Filesystem**
Okay, let's take a deep dive into the BEFS filesystem code. I need to make absolutely sure there aren't any sneaky shifts, left or right, corrupting critical superblock fields or other variables. My gut tells me this could be a source of some intermittent issues we've been seeing. So, first things first, I'm going to run a comprehensive check on all the files residing in `fs/befs/`. I'll be looking specifically for those tell-tale shift operators, the `<<` and `>>` symbols. A simple `grep` should do the trick. I'll search for `<<` within `fs/befs`. This should give me a good starting point for a deeper investigation.
|
| 202/4 |
2026/08/26 18:01 |
tool |
grepper |
0m
Args: map[Expression:<< PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-58- if (off)
fs/befs/datastream.c:59: *off = pos - (block << BEFS_SB(sb)->block_shift);
fs/befs/datastream.c-60-
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.c-98- int err;
fs/befs/datastream.c:99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-100-
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-95-
fs/befs/super.c:96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
fs/befs/super.c-97- befs_error(sb, "block_shift disagrees with block_size. "
--
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c-107- befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
]
|
| 203/4 |
2026/08/26 18:01 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 33813
output: 25
thoughts: 16
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing Potential Output Redirection in befs File System**
Okay, so I'm digging into `fs/befs` again. I need to understand how the file system handles, or perhaps more accurately, *doesn't* handle, output redirection. The most direct approach is to check for the double-right-angle bracket, `>>`, which is the standard shell operator for appending output to a file. My intuition says there might not be explicit handling within the kernel for this particular redirection, but I can't be sure until I examine the code. It is more likely the redirection is handled at the shell level. Let's see if the code includes any special-case behavior, possibly within the VFS interface functions if there's any. I'll need to use `grep` with the `>>` operator in the `fs/befs` directory. This should highlight any instances where that sequence is checked, constructed, or acted upon. This will offer insight into how output is written into befs, and may reveal how shell redirection is, or is not, handled within the driver or VFS calls. I'm going to start with this basic search and then expand outward based on results.
|
| 204/4 |
2026/08/26 18:02 |
tool |
grepper |
0m
Args: map[Expression:>> PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-56- befs_debug(sb, "---> %s %llu", __func__, pos);
fs/befs/datastream.c:57: block = pos >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-58- if (off)
--
fs/befs/datastream.c=172=befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
--
fs/befs/datastream.c-180-
fs/befs/datastream.c:181: datablocks = ds->size >> befs_sb->block_shift;
fs/befs/datastream.c-182- if (ds->size & (befs_sb->block_size - 1))
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-322-
fs/befs/datastream.c:323: indir_start_blk = data->max_direct_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-324- search_blk = blockno - indir_start_blk;
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-433- befs_blocknr_t indir_start_blk =
fs/befs/datastream.c:434: data->max_indirect_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-435-
--
fs/befs/linuxvfs.c=299=static struct inode *befs_iget(struct super_block *sb, unsigned long ino)
--
fs/befs/linuxvfs.c-365- inode_set_mtime(inode,
fs/befs/linuxvfs.c:366: fs64_to_cpu(sb, raw_inode->last_modified_time) >> 16,
fs/befs/linuxvfs.c-367- 0);/* lower 16 bits are not a time */
]
|
| 205/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 34875
output: 72
thoughts: 1783
Thoughts: **Analysis of Block and Allocation Group Shifts in the BEFS Filesystem**
Okay, let's break down this BEFS code. My initial focus is on the usage of `block_shift` and `ag_shift`. I've gone through the code, pinpointing every instance where they're used.
First, I examined `datastream.c`. I found that `block_shift` is used in several functions: `befs_read_datastream`, `befs_fblock2brun`, `befs_count_blocks`, `befs_find_brun_indirect`, and `befs_find_brun_dblindirect`. In these functions, it's used with bit-shift operations (right-shift and left-shift) on 64-bit integers (`befs_off_t` and `befs_blocknr_t`). The value of `block_shift` is strictly controlled and validated by `befs_check_sb`, which ensures that `block_shift` is $\log_2(\text{block\_size})$, where `block_size` is limited to 1024, 2048, 4096, or 8192. This guarantees that the shift values are between 10 and 13.
Now, regarding `ag_shift`, it's not as widely used. I saw it used only in `befs.h` within `iaddr2blockno()` and `blockno2iaddr()`, as well as within `super.c` in `befs_check_sb()` and `befs_dump_super_block()`.
In `befs.h`, the `iaddr2blockno()` and `blockno2iaddr()` functions use `ag_shift` to convert between inode addresses and block numbers. I need to make certain that the shift operations are well-defined. The `allocation_group` is properly cast to `befs_blocknr_t` before the left-shift to prevent potential truncation or overflow during the 64-bit calculation.
Then, I focused on the `super.c` code to understand the checks on these shifts. Specifically, I'm checking the logic around `befs_check_sb`. The code performs consistency checks between `block_shift` and `block_size`, and also `ag_shift` and `blocks_per_ag`. I've looked at line 90-115 of `super.c` and lines 120-145 of `befs.h`.
There's a key point here concerning potential shift-out-of-bounds, that I need to ensure is handled correctly. Before checking `(1U << befs_sb->block_shift) != befs_sb->block_size`, there's a guard condition checking for `befs_sb->block_shift >= 32`. This short-circuits the comparison if the shift value is too large, preventing undefined behavior. If `block_shift` is less than 32, the shift operation is safe, and it checks for inconsistencies with `block_size`. A similar check is made for `ag_shift`. If it is too large, the error is fatal, and the system exits. If it is less than 32, a warning is issued if it is inconsistent with `blocks_per_ag`.
So, the code seems sound, and the shift operations are handled with care, guarding against undefined behavior. The casts and the checks within `befs_check_sb` ensure the validity of these operations. This all looks good.
|
| 206/4 |
2026/08/26 18:02 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:90 LineCount:25]
Results: map[Contents: 90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
]
|
| 207/4 |
2026/08/26 18:02 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:120 LineCount:25]
Results: map[Contents: 120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
]
|
| 208/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 38298
output: 392
thoughts: 34
Thoughts: Okay, here's my take on those thoughts, framed as an expert in the field:
**Reflecting on Filesystem Modification**
Alright, so I need to make some targeted changes to the BEFS filesystem code. Looking at the situation, the most efficient approach is definitely to work directly with the `codeeditor`. It's the tool that offers the granularity and control I require to make precise modifications to core files. I'm focusing on `fs/befs/super.c` and `fs/befs/befs.h`. These files contain the superblock and fundamental data structure definitions, respectively, which tells me the changes I'm about to apply are going to be fundamental. I need to proceed with a surgical approach so I need to go straight in with the appropriate tools.
|
| 209/4 |
2026/08/26 18:02 |
tool |
codeeditor |
0m
Args: map[CurrentCode: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag."); NewCode: if (befs_sb->block_shift >= 32 ||
(1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if (befs_sb->ag_shift >= 32) {
befs_error(sb, "ag_shift >= 32. Corruption likely.");
return BEFS_ERR;
}
if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag."); SourceFile:fs/befs/super.c]
Results:
|
| 210/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 38897
output: 426
thoughts: 13
Thoughts: Here's a summary of my immediate thought process, as if I were considering the next action in a development task:
**Editing `fs/befs/befs.h`**
Okay, so the next logical step is to dive into `fs/befs/befs.h`. This likely means I'm working with the BeFS file system implementation, and `befs.h` is probably where the core data structures, constants, and function prototypes for the BeFS module reside. I'll need to open this file and get a good understanding of what it defines. I expect to see things like:
* **Structure definitions:** File system metadata, inode structures, directory entry formats, superblock layout, etc. This is crucial for understanding how data is organized and accessed. I will be looking out for how BeOS handles data.
* **Constants:** Definitions for magic numbers, file system flags, error codes, and possibly sizes or limits related to BeFS. These are essential for interpreting raw data and ensuring correct behavior.
* **Function prototypes:** Declarations of the functions that make up the BeFS kernel interface. I'll need to know which functions are available, their signatures, and what they're intended to do. This will help me navigate the code and understand how it interacts with the rest of the file system stack.
I'll be paying close attention to any changes I made earlier, and how this file ties into those changes. Based on the task I'm working on, I'll be focused on identifying the relevant sections of this header.
|
| 211/4 |
2026/08/26 18:02 |
tool |
codeeditor |
0m
Args: map[CurrentCode:static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
} NewCode:static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
} SourceFile:fs/befs/befs.h]
Results:
|
| 212/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 39673
output: 10
thoughts: 12
Thoughts: Okay, here's my attempt at summarizing the thought process, as if it were my own, assuming I'm an expert in the field:
**Verifying Changes with `patch-diff`**
Alright, before I commit to anything, I need to make absolutely sure these changes are what I expect. I've got a good feeling about it, but gut feeling isn't a substitute for rigorous verification, especially given the scale of the potential impact. My immediate thought is to use `patch-diff`. It's my go-to for thoroughly examining modifications, and I want to see exactly how these changes translate into the larger picture. I'm going to run that command now, meticulously reviewing the output. I'm looking for anything unexpected, any subtle behavior changes. The goal is pinpoint any potential regressions or unforeseen consequences that need to be addressed before I even *think* about moving forward. This is all about safeguarding the system's integrity, and a proper `patch-diff` verification is crucial for that.
|
| 213/4 |
2026/08/26 18:02 |
tool |
patch-diff |
0m
Error:
|
| 214/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 39925
output: 15
thoughts: 15
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the `patch-diff` Call**
Okay, so I'm looking at this `patch-diff` call, specifically the part where it's being given an empty string for the file argument. My initial thought process is to consider why we'd be doing that. Normally, a file argument provides the source against which the patch will be applied. An empty string is... unusual. It immediately flags a few potential scenarios, and each needs a closer look:
* **Potential Redundancy/Bug:** Is this a remnant of some debugging or refactoring process? It's possible an earlier implementation or test case used a placeholder, and it hasn't been properly removed. Perhaps the logic intended to dynamically determine the file, but the code isn't fully implemented or has an error. Or, perhaps, it expects standard in.
* **Implied Standard Input:** Could this be a deliberate signal to `patch-diff` that it should operate on standard input, either because the patch is piped in or because the intended base content is implicitly elsewhere, like perhaps from a previous step in a build process? This would be a more sophisticated design pattern. I need to check the tool's documentation or the source code to confirm the behavior on a blank file argument.
* **Specialized Use Case:** Is `patch-diff` part of a larger workflow or toolchain? Could an empty filename have a very specific, application-dependent meaning? It might be calling another tool with standard input. This seems less likely on face value, but I shouldn't dismiss it yet.
* **Security Implications:** While rare, it's worth considering if this presents any security vulnerabilities, such as a code injection issue if the empty string is handled in an unexpected way. Even if unlikely, best practice is to at least consider the corner cases.
Ultimately, I need to know why the empty file parameter is necessary. The most important next step is to examine the surrounding code to determine intent, and failing that, consult documentation for the `patch-diff` tool.
|
| 215/4 |
2026/08/26 18:02 |
tool |
patch-diff |
0m
Args:
Results: map[Output:diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -115,32 +115,32 @@ BEFS_SB(const struct super_block *super)
static inline struct befs_inode_info *
BEFS_I(const struct inode *inode)
{
return container_of(inode, struct befs_inode_info, vfs_inode);
}
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
static inline unsigned int
befs_iaddrs_per_block(struct super_block *sb)
{
return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
}
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -58,61 +58,66 @@ int
befs_check_sb(struct super_block *sb)
{
struct befs_sb_info *befs_sb = BEFS_SB(sb);
/* Check magic headers of super block */
if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
|| (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
|| (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
befs_error(sb, "invalid magic header");
return BEFS_ERR;
}
/*
* Check blocksize of BEFS.
*
* Blocksize of BEFS is 1024, 2048, 4096 or 8192.
*/
if ((befs_sb->block_size != 1024)
&& (befs_sb->block_size != 2048)
&& (befs_sb->block_size != 4096)
&& (befs_sb->block_size != 8192)) {
befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
return BEFS_ERR;
}
if (befs_sb->block_size > PAGE_SIZE) {
befs_error(sb, "blocksize(%u) cannot be larger "
"than system pagesize(%lu)", befs_sb->block_size,
PAGE_SIZE);
return BEFS_ERR;
}
/*
* block_shift and block_size encode the same information
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this "
"volume to make it clean.");
return BEFS_ERR;
}
return BEFS_OK;
}
]
|
| 216/4 |
2026/08/26 18:02 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 41859
output: 409
thoughts: 206
Thoughts: **Analyzing the BEFS Fix**
Okay, this diff looks solid. It's addressing some critical vulnerabilities in the BEFS filesystem code. Let's break down my assessment:
First, it's preventing the dreaded UBSAN shift-out-of-bounds error in `befs_check_sb()`. The guard added for `block_shift >= 32` and `ag_shift >= 32` is a good catch. It's obvious but important.
Second, the code's using `1U` to avoid signed integer overflow when shifting. Using an unsigned literal is *precisely* the right way to handle potential issues with bit shifts. It's clean and safe, which I appreciate.
Third, treating `ag_shift >= 32` as fatal is the correct choice. Because of the way `ag_shift` is subsequently used within `iaddr2blockno()` and `blockno2iaddr()` to derive block numbers, a shift of 32 or more will corrupt the block number calculations. It's important to prevent this from silently producing incorrect block addresses, and causing data loss or corruption.
Finally, the cast to `(befs_blocknr_t)` before shifting `allocation_group` in those same functions (`iaddr2blockno()` and `blockno2iaddr()`) within `fs/befs/befs.h` is crucial. Without that cast, we'd run the risk of 32-bit truncation when computing 64-bit block numbers on a 64-bit architecture. That would be a disaster. This is a very targeted and effective fix for a potential data integrity issue.
Overall, it's a comprehensive fix. I'm ready to write a detailed explanation of the bug and the changes to the team.
|
| 217/3 |
2026/08/26 18:02 |
action |
test-patch |
23m
Results: map[PatchDiff:diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
TestError:]
|
| 218/3 |
2026/08/26 18:25 |
action |
If |
1m
Args:
|
| 219/4 |
2026/08/26 18:25 |
agent |
patch-reviewer |
1m
Model:
Results: map[ReviewApproved:true ReviewComments:[]]
Instruction: You are an experienced Linux kernel maintainer reviewing a proposed patch that compiles and passes reproducer tests.
Evaluate the patch diff against the crash report, root cause, and the architectural design guidelines below.
Scope Constraint (Single-Patch Submissions):
We only generate single, standalone patches (not patch series). If a comprehensive architectural redesign would require a multi-patch series touching many files, accept a localized single-patch fix as long as it correctly fixes the bug, does not introduce new issues, and avoids sentinel band-aids within its local scope.
Evaluation:
- Set ReviewApproved=true (and leave ReviewComments empty) if the patch is acceptable for upstream submission as a single-patch fix.
- Set ReviewApproved=false and list concise, actionable feedback in ReviewComments if the patch contains fixable "Kernel Architectural Design & Maintainer Taste" violations.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
---
# Kernel Architectural Design & Maintainer Taste
Evaluate kernel patches and fix proposals beyond binary bug presence. Enforce **maintainer taste**, **lifecycle symmetry**, **typestate soundness**, and **topological graph simplicity**.
---
## 1. Core Philosophy: Band-Aid vs. Architectural Design
Naive patches often introduce **defensive sentinel guards** (e.g., ad-hoc `if (!ptr) return;` checks, status flags, or suppressed warnings) directly at the point of failure. While locally avoiding crashes, they degrade subsystem architecture by leaving uninitialized states reachable.
Maintainer "good taste" solves the root cause by **shifting invariants** (making invalid states unrepresentable) and moving dynamic runtime checks into static typestate guarantees.
```
HACKY BAND-AID FIX (Monolithic Cleanup) ARCHITECTURAL DESIGN (Scoped RAII / Invariant Shift)
─────────────────────────────────────── ────────────────────────────────────────────────────
[ Init / Entry ] [ Init / Entry ]
│ │
(Register Global Cleanup) (Allocate Resource A)
│ │
[ Init Sub-B ] ──fail──┐ [ Init Sub-B ] ──fail──┐
│ (success) │ │ (success) │
▼ │ ▼ ▼
[ Setup Complete ] │ (Arm B Cleanup / RAII) (Unwind A Only:
│ │ │ B never armed)
(Deferred Teardown) │ ▼ │
│ │ [ Setup Complete ] ▼
▼ ▼ │ [ Error Exit ]
[ release_all ] ◄───────┘ (LIFO Scope Teardown)
│ │
(if (!ctx->b) return;) <-- Defensive guard! ▼
│ [ Clean Destruction ]
[ Unsafe State ] (Zero sentinel checks needed)
```
```c
// ANTI-PATTERN (Defensive Sentinel Guard): Teardown called on partial init -> callee needs guard
void driver_cleanup(struct ctx *ctx) {
if (!ctx->buf) return; // <-- Sentinel band-aid
free_buffer(ctx->buf);
}
// CANONICAL SHIFT (Granular Scoped Action): Registered only upon complete initialization
ctx->buf = alloc_buffer();
if (!ctx->buf) return -ENOMEM;
devm_add_action_or_reset(dev, free_buffer_action, ctx->buf);
```
---
## 2. Maintainer Taste as Graph Topology & Structural Simplicity
Software design quality maps directly to graph-theoretic properties across the Control-Flow Graph (CFG), Data-Flow Graph (DFG), and Object Lifecycle DAG:
### A. Control-Flow Graph (CFG) Simplification
* **Branch Minimization & Path Explosion (McCabe 1976):** Every defensive check added to a compound destructor or callback (`if (!ctx->buffer) return;`) adds a predicate node ($\pi$), increases cyclomatic complexity $v(G) = |E| - |V| + 2$, causes exponential path explosion ($O(2^k)$ paths), and enlarges explicit state spaces ($|S| = \prod |D_i|$). Good taste eliminates the branch by guaranteeing destructors are invoked only on initialized typestates. *(Note: Standard idempotent leaf deallocators like `kfree(NULL)` and public API input sanitizers are exempt).*
* **Single-Entry Single-Exit (SESE) Symmetry (Ferrante 1987, Johnson 1994, Dijkstra 1972):** Resource acquisition and release must form strict **nested dominator trees**. If resource $R_i$ is acquired at node $A$, the set of release actions $\{B_1, \dots, B_m\}$ must form a strict **post-dominating cut** relative to $A$ across all maximal exit paths.
* **Pointer Uniformity (Linus's "Good Taste" Rule):** Eliminate special-case conditional branches by operating on address indirection (e.g., indirect pointers `**curr` in linked list unlinking) to unify edge and interior cases into a branchless invariant.
* **Lexical Scope Invariants & Affine Lifecycles (Wadler 1990, RAII):** Enforce SESE symmetry and "consumed exactly once" affine invariants using compiler-backed scoped cleanup (`<linux/cleanup.h>` `guard()`, `scoped_guard()`, `__free()`).
### B. Ownership & Lifetime DAGs
* **Acyclic Lifecycles & Topological Teardown (Tarjan 1972, Kahn 1962):** Resource ownership must form a strict Directed Acyclic Graph (DAG) $G = (R, E)$. Teardown order must strictly follow reverse topological sort $\text{toposort}(G)^R$. Mixing conflicting lifetime paradigms (e.g., embedding a dynamic refcounted `kref`/socket struct inside a device-managed `devres` buffer or parent container) violates DAG acyclicity, creating synchronous blocking hacks (`wait_for_completion`), circular pins, and Use-After-Free hazards.
* **Three-Phase Concurrent Quiescence:** Multi-threaded and asynchronous teardown (networking, block layer, RCU) must strictly sequence: (1) **Deactivation/Delisting** (make unreachable) -> (2) **Quiescence & Draining** (`synchronize_rcu()`, `cancel_work_sync()`, `napi_disable()`) -> (3) **Physical Reclamation** (`kfree()`, `kmem_cache_destroy()`).
* **Typestate Validity (Strom & Yemini 1986, Aldrich et al. 2009):** A struct with $N$ fields should not use runtime boolean flags (`ctx->is_initialized`) to model incomplete typestates. Sub-resources must transition as a deterministic typestate automaton ($S_{uninit} \xrightarrow{\text{alloc}} S_{init} \xrightarrow{\text{publish}} S_{registered}$), and registration functions must accept only fully initialized typestates.
---
## 3. Deterministic Decision Trigger Matrix
| Code Symptom / Trigger (When you see X) | Anti-Pattern Band-Aid (DO NOT DO Z) | Canonical Invariant Shift (DO Y) |
| :--- | :--- | :--- |
| **Null deref in compound destructor / cleanup callback** | Add `if (!priv->buf) return;` in composite cleanup handler | Register granular cleanup immediately upon allocation via `devm_add_action_or_reset()`, `<linux/cleanup.h>` `__free()`, or discrete reverse LIFO labels |
| **UAF on dynamic object after container unbind** | Allocate with `devm_kzalloc()` and block on `wait_for_completion()` | Allocate with `kzalloc()`, manage lifetime via `kref_get()`/`kref_put()`, call unbind/delist on unbind, free in `kref` release callback |
| **Goto ladder lock leaks on early error exit** | Sprinkle manual `mutex_unlock()` across error returns | Use `guard(mutex)(&lock)` or `scoped_guard(spinlock, &lock)` from `<linux/cleanup.h>` |
| **Callback / IRQ / timer fires before full init** | Add `if (!priv->ready)` check inside IRQ/timer handler | Move `request_irq()`, `timer_setup()`, or `napi_enable()` strictly to the end of setup after all state structures are fully initialized |
| **Multi-step setup failure leaks resources** | Route all errors to a single `err:` label calling a monolithic `cleanup(priv)` with NULL checks | Use `cleanup.h` RAII, granular `devm` actions, or a strict reverse LIFO goto ladder (`err_free_b:` -> `err_free_a:`) |
| **Mixed ownership / asymmetric refcount drops** | Conditionally call `kref_put()` in caller based on error code | Enforce unconditional callee-cleans or caller-cleans ownership convention across all paths |
| **Ad-hoc state flag polling during teardown** | Add `priv->stopping = true` and spin/poll in callbacks | Use atomic typestate transitions and synchronous flush/drain APIs (`cancel_work_sync()`, `drain_workqueue()`) |
---
## 4. The Architectural Review Checklist
Before finalizing any kernel fix or review, audit against the following four criteria:
1. **The Sentinel Test (Caller vs. Callee Responsibility):**
* *Smell:* Adding a defensive guard (`if (!ptr)` or `if (flags & INITIALIZED)`) inside a compound teardown callback or destructor to mask partial initialization.
* *Invariant:* If a destructor executes on uninitialized data, the defect is at the **caller's registration/invocation point**, not the callee.
* *Note:* Standard C allocator no-ops (`kfree(NULL)`) and public API parameter validators (`if (WARN_ON(!ptr)) return -EINVAL;`) are exempt; this rule targets *internal subsystem lifecycle pipelines and teardown paths*.
* *Action:* Move registration to the point of complete initialization (`devm_add_action_or_reset()`, RAII/`__free()`, or discrete caller unwinding).
2. **LIFO Stack Unwinding Symmetry:**
* *Smell:* Releasing resources in arbitrary order or invoking destructors for partially initialized subsystems.
* *Invariant:* Resource release must strictly mirror acquisition order in reverse (LIFO) without monolithic cleanup guards.
* *Action:* Verify that partial setup/initialization failures (e.g., `probe()`, `mount()`, `open()`, `alloc_pool()`) unwind only already-allocated resources in reverse order via strict LIFO labels or `cleanup.h` scope exit.
3. **Ownership Decoupling:**
* *Smell:* Embedding dynamically refcounted objects (`kref`, `struct sock`, `struct inode`, `struct file`) directly inside hardware device-bound allocations (`devres`) or parent containers (`super_block`, `net_device`).
* *Invariant:* Dynamic consumer references must outlive parent unregistration without use-after-free, circular pins, or blocking hacks.
* *Action:* Decouple the refcounted core object from the container binding; container teardown must unbind/delist the object, but memory is freed exclusively by the final `kref_put()`.
4. **Codebase Idiom Alignment:**
* *Smell:* Using legacy custom rollback ladders, ad-hoc state flags, or manual lock unlocking on error paths.
* *Invariant:* Prefer standard, modern kernel abstractions with compiler-enforced safety guarantees.
* *Action (Modern >= 6.6):* Replace manual boilerplate with `cleanup.h` (`guard()`, `scoped_guard()`, `__free()`), `devm_add_action_or_reset()`, `refcount_t`, and standard `kref` helpers.
* *Action (Legacy / LTS / No-RAII Subsystems):* Enforce clean, branchless reverse LIFO goto ladders (`err_free_b:` -> `err_free_a:`).
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
Bug title:
UBSAN: shift-out-of-bounds in befs_check_sb
The crash report:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The root cause explanation:
An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
The proposed patch diff:
diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
Review this patch diff against the crash report, root cause explanation, and kernel architectural design guidelines.
|
| 220/5 |
2026/08/26 18:25 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 9970
output: 72
thoughts: 67
Thoughts: Here's my analysis of the situation:
**Diving Deep into the Kernel: A BEFS Investigation**
Okay, so we've got a patch, a crash report, and a presumed root cause, along with some relevant guidelines to follow. Time to put on the investigative hat and get to work. First things first, I need to get my hands dirty with the code. I'll leverage the kernel's codesearch and read-file tools to poke around. My initial focus is the BEFS file system, naturally. Given the context, I expect the issue to be somewhere in its core components. Specifically, I'm going to start by scrutinizing `fs/befs/super.c` and `fs/befs/befs.h`. These files are the likely candidates for containing the supervisory structures and the foundational definitions that underpin the BEFS implementation. They'll give me the initial context I need. From there, I'll be able to trace potential execution paths and spot likely culprits in the reported error. Let's see what we find.
|
| 221/5 |
2026/08/26 18:25 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:60 LineCount:80]
Results: map[Contents: 60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
61:
62: /* Check magic headers of super block */
63: if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
64: || (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
65: || (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
66: befs_error(sb, "invalid magic header");
67: return BEFS_ERR;
68: }
69:
70: /*
71: * Check blocksize of BEFS.
72: *
73: * Blocksize of BEFS is 1024, 2048, 4096 or 8192.
74: */
75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 222/5 |
2026/08/26 18:25 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:115 LineCount:40]
Results: map[Contents: 115:
116: static inline struct befs_inode_info *
117: BEFS_I(const struct inode *inode)
118: {
119: return container_of(inode, struct befs_inode_info, vfs_inode);
120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
145: return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
146: }
147:
148: #include "endian.h"
149:
150: #endif /* _LINUX_BEFS_H */
]
|
| 223/5 |
2026/08/26 18:25 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 11805
output: 61
thoughts: 49
Thoughts: Okay, let's dive into this code. First, I need to get a handle on the key data structures here. I'm going to start by taking a look at `befs_inode_addr`, `befs_sb_info`, and their associated types. I need to understand how these elements interrelate and what roles they play in the bigger picture of this BEFS implementation.
Then, I'll do a focused search within the codebase for instances of `befs_sb_info` and `befs_inode_addr`. This should provide me with some clues about how they're used in practice, how they're initialized, how data is passed and referenced, and ultimately how the BEFS file system operates. It'll give me context to understand the broader implications of these structs and types. This should lead me toward a better, more in-depth understanding of the code.
|
| 224/5 |
2026/08/26 18:25 |
tool |
grepper |
0m
Args: map[Expression:struct befs_sb_info PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h=23=struct befs_mount_options {
--
fs/befs/befs.h-31-
fs/befs/befs.h:32:struct befs_sb_info {
fs/befs/befs.h-33- u32 magic1;
--
fs/befs/befs.h=103=void befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead *);
--
fs/befs/befs.h-109- */
fs/befs/befs.h:110:static inline struct befs_sb_info *
fs/befs/befs.h-111-BEFS_SB(const struct super_block *super)
fs/befs/befs.h-112-{
fs/befs/befs.h:113: return (struct befs_sb_info *) super->s_fs_info;
fs/befs/befs.h-114-}
--
fs/befs/datastream.c=172=befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
--
fs/befs/datastream.c-176- befs_blocknr_t metablocks; /* FS metadata blocks */
fs/befs/datastream.c:177: struct befs_sb_info *befs_sb = BEFS_SB(sb);
fs/befs/datastream.c-178-
--
fs/befs/io.c=27=befs_bread_iaddr(struct super_block *sb, befs_inode_addr iaddr)
--
fs/befs/io.c-30- befs_blocknr_t block;
fs/befs/io.c:31: struct befs_sb_info *befs_sb = BEFS_SB(sb);
fs/befs/io.c-32-
--
fs/befs/linuxvfs.c=299=static struct inode *befs_iget(struct super_block *sb, unsigned long ino)
--
fs/befs/linuxvfs.c-302- befs_inode *raw_inode;
fs/befs/linuxvfs.c:303: struct befs_sb_info *befs_sb = BEFS_SB(sb);
fs/befs/linuxvfs.c-304- struct befs_inode_info *befs_ino;
--
fs/befs/linuxvfs.c=725=static int befs_show_options(struct seq_file *m, struct dentry *root)
fs/befs/linuxvfs.c-726-{
fs/befs/linuxvfs.c:727: struct befs_sb_info *befs_sb = BEFS_SB(root->d_sb);
fs/befs/linuxvfs.c-728- struct befs_mount_options *opts = &befs_sb->mount_opts;
--
fs/befs/linuxvfs.c=761=static void
fs/befs/linuxvfs.c:762:befs_set_options(struct befs_sb_info *sbi, struct befs_mount_options *opts)
fs/befs/linuxvfs.c-763-{
--
fs/befs/linuxvfs.c=780=befs_fill_super(struct super_block *sb, struct fs_context *fc)
--
fs/befs/linuxvfs.c-782- struct buffer_head *bh;
fs/befs/linuxvfs.c:783: struct befs_sb_info *befs_sb;
fs/befs/linuxvfs.c-784- befs_super_block *disk_sb;
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
fs/befs/super.c-22-{
fs/befs/super.c:23: struct befs_sb_info *befs_sb = BEFS_SB(sb);
fs/befs/super.c-24-
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
fs/befs/super.c-59-{
fs/befs/super.c:60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
fs/befs/super.c-61-
]
|
| 225/5 |
2026/08/26 18:25 |
tool |
grepper |
0m
Args: map[Expression:befs_inode_addr PathPrefix:fs/befs]
Results: map[Output:fs/befs/ChangeLog=204=Version 0.4 (2001-10-28)
--
fs/befs/ChangeLog-248-==========
fs/befs/ChangeLog:249:* Fix nasty bug in converting block numbers to struct befs_inode_addr.
fs/befs/ChangeLog-250- Subtle, because the old version was only sometimes wrong.
--
fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-54-
fs/befs/befs.h:55: befs_inode_addr root_dir;
fs/befs/befs.h:56: befs_inode_addr indices;
fs/befs/befs.h-57- u32 magic3;
--
fs/befs/befs.h=63=struct befs_inode_info {
--
fs/befs/befs.h-66-
fs/befs/befs.h:67: befs_inode_addr i_inode_num;
fs/befs/befs.h:68: befs_inode_addr i_parent;
fs/befs/befs.h:69: befs_inode_addr i_attribute;
fs/befs/befs.h-70-
--
fs/befs/befs.h=122=static inline befs_blocknr_t
fs/befs/befs.h:123:iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
--
fs/befs/befs.h-128-
fs/befs/befs.h:129:static inline befs_inode_addr
fs/befs/befs.h-130-blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
fs/befs/befs.h-131-{
fs/befs/befs.h:132: befs_inode_addr iaddr;
fs/befs/befs.h-133-
--
fs/befs/befs_fs_types.h=107=typedef befs_disk_block_run befs_disk_inode_addr;
fs/befs/befs_fs_types.h:108:typedef befs_block_run befs_inode_addr;
fs/befs/befs_fs_types.h-109-
--
fs/befs/datastream.c-21-
fs/befs/datastream.c:22:const befs_inode_addr BAD_IADDR = { 0, 0, 0 };
fs/befs/datastream.c-23-
--
fs/befs/datastream.h=17=befs_blocknr_t befs_count_blocks(struct super_block *sb,
--
fs/befs/datastream.h-19-
fs/befs/datastream.h:20:extern const befs_inode_addr BAD_IADDR;
--
fs/befs/inode.c=19=befs_check_inode(struct super_block *sb, befs_inode *raw_inode,
--
fs/befs/inode.c-22- u32 magic1 = fs32_to_cpu(sb, raw_inode->magic1);
fs/befs/inode.c:23: befs_inode_addr ino_num = fsrun_to_cpu(sb, raw_inode->inode_num);
fs/befs/inode.c-24- u32 flags = fs32_to_cpu(sb, raw_inode->flags);
--
fs/befs/io.c=26=struct buffer_head *
fs/befs/io.c:27:befs_bread_iaddr(struct super_block *sb, befs_inode_addr iaddr)
fs/befs/io.c-28-{
--
fs/befs/io.h=5=struct buffer_head *befs_bread_iaddr(struct super_block *sb,
fs/befs/io.h:6: befs_inode_addr iaddr);
]
|
| 226/5 |
2026/08/26 18:25 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 14355
output: 76
thoughts: 24
Thoughts: Here's my summary, as though I were thinking through the process:
**Diving into BEFS Structures**
Alright, time to get to the core of this. I need to refresh my memory on the data structures. Let's start by looking at `befs_fs_types.h` and `befs.h`. I'll want to see how the core filesystem types are defined, specifically, how the fundamental blocks and metadata are structured. I'm looking for the essential building blocks: the inodes, directory entries, superblocks, and likely some sort of buffer or block descriptors. This will give me the foundational context I need to understand what's going on at a lower level.
|
| 227/5 |
2026/08/26 18:26 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:1 LineCount:100]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: /*
3: * fs/befs/befs_fs_types.h
4: *
5: * Copyright (C) 2001 Will Dyson (will@cs.earlham.edu)
6: *
7: *
8: *
9: * from linux/include/linux/befs_fs.h
10: *
11: * Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
12: *
13: */
14:
15: #ifndef _LINUX_BEFS_FS_TYPES
16: #define _LINUX_BEFS_FS_TYPES
17:
18: #ifdef __KERNEL__
19: #include <linux/types.h>
20: #endif /*__KERNEL__*/
21:
22: #define PACKED __attribute__ ((__packed__))
23:
24: /*
25: * Max name lengths of BFS
26: */
27:
28: #define BEFS_NAME_LEN 255
29:
30: #define BEFS_SYMLINK_LEN 144
31: #define BEFS_NUM_DIRECT_BLOCKS 12
32: #define B_OS_NAME_LENGTH 32
33:
34: /* The datastream blocks mapped by the double-indirect
35: * block are always 4 fs blocks long.
36: * This eliminates the need for linear searches among
37: * the potentially huge number of indirect blocks
38: *
39: * Err. Should that be 4 fs blocks or 4k???
40: * It matters on large blocksize volumes
41: */
42: #define BEFS_DBLINDIR_BRUN_LEN 4
43:
44: /*
45: * Flags of superblock
46: */
47:
48: enum super_flags {
49: BEFS_BYTESEX_BE,
50: BEFS_BYTESEX_LE,
51: BEFS_CLEAN = 0x434c454e,
52: BEFS_DIRTY = 0x44495254,
53: BEFS_SUPER_MAGIC1 = 0x42465331, /* BFS1 */
54: BEFS_SUPER_MAGIC2 = 0xdd121031,
55: BEFS_SUPER_MAGIC3 = 0x15b6830e,
56: };
57:
58: #define BEFS_BYTEORDER_NATIVE 0x42494745
59: #define BEFS_BYTEORDER_NATIVE_LE ((__force fs32)cpu_to_le32(BEFS_BYTEORDER_NATIVE))
60: #define BEFS_BYTEORDER_NATIVE_BE ((__force fs32)cpu_to_be32(BEFS_BYTEORDER_NATIVE))
61:
62: #define BEFS_SUPER_MAGIC BEFS_SUPER_MAGIC1
63: #define BEFS_SUPER_MAGIC1_LE ((__force fs32)cpu_to_le32(BEFS_SUPER_MAGIC1))
64: #define BEFS_SUPER_MAGIC1_BE ((__force fs32)cpu_to_be32(BEFS_SUPER_MAGIC1))
65:
66: /*
67: * Flags of inode
68: */
69:
70: #define BEFS_INODE_MAGIC1 0x3bbe0ad9
71:
72: enum inode_flags {
73: BEFS_INODE_IN_USE = 0x00000001,
74: BEFS_ATTR_INODE = 0x00000004,
75: BEFS_INODE_LOGGED = 0x00000008,
76: BEFS_INODE_DELETED = 0x00000010,
77: BEFS_LONG_SYMLINK = 0x00000040,
78: BEFS_PERMANENT_FLAG = 0x0000ffff,
79: BEFS_INODE_NO_CREATE = 0x00010000,
80: BEFS_INODE_WAS_WRITTEN = 0x00020000,
81: BEFS_NO_TRANSACTION = 0x00040000,
82: };
83: /*
84: * On-Disk datastructures of BeFS
85: */
86:
87: typedef u64 __bitwise fs64;
88: typedef u32 __bitwise fs32;
89: typedef u16 __bitwise fs16;
90:
91: typedef u64 befs_off_t;
92: typedef fs64 befs_time_t;
93:
94: /* Block runs */
95: typedef struct {
96: fs32 allocation_group;
97: fs16 start;
98: fs16 len;
99: } PACKED befs_disk_block_run;
100:
]
|
| 228/5 |
2026/08/26 18:26 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:20 LineCount:60]
Results: map[Contents: 20: * BeFS in memory structures
21: */
22:
23: struct befs_mount_options {
24: kgid_t gid;
25: kuid_t uid;
26: int use_gid;
27: int use_uid;
28: int debug;
29: char *iocharset;
30: };
31:
32: struct befs_sb_info {
33: u32 magic1;
34: u32 block_size;
35: u32 block_shift;
36: int byte_order;
37: befs_off_t num_blocks;
38: befs_off_t used_blocks;
39: u32 inode_size;
40: u32 magic2;
41:
42: /* Allocation group information */
43: u32 blocks_per_ag;
44: u32 ag_shift;
45: u32 num_ags;
46:
47: /* State of the superblock */
48: u32 flags;
49:
50: /* Journal log entry */
51: befs_block_run log_blocks;
52: befs_off_t log_start;
53: befs_off_t log_end;
54:
55: befs_inode_addr root_dir;
56: befs_inode_addr indices;
57: u32 magic3;
58:
59: struct befs_mount_options mount_opts;
60: struct nls_table *nls;
61: };
62:
63: struct befs_inode_info {
64: u32 i_flags;
65: u32 i_type;
66:
67: befs_inode_addr i_inode_num;
68: befs_inode_addr i_parent;
69: befs_inode_addr i_attribute;
70:
71: union {
72: befs_data_stream ds;
73: char symlink[BEFS_SYMLINK_LEN];
74: } i_data;
75:
76: struct inode vfs_inode;
77: };
78:
79: enum befs_err {
]
|
| 229/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 16824
output: 32
thoughts: 15
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm already deep in the weeds of this codebase:
**Analyzing `befs_block_run`**
Alright, time to get my hands dirty. My immediate thought is, "Okay, `befs_block_run`... what's this function actually *doing*?" I need to understand its purpose, what it's touching, and how it interacts with the rest of the BEFS filesystem code. I'm already assuming it's related to block management, but the devil's in the details. I need to dive in and confirm that, and find out what specific operations it's responsible for. Is it read, write, allocation, deallocation, or some combination thereof? What data structures does it manipulate? I need to build a mental map of its functionality. Let's see what the code reveals.
|
| 230/5 |
2026/08/26 18:26 |
tool |
grepper |
0m
Args: map[Expression:struct .*befs_block_run PathPrefix:fs/befs]
Results: map[Output:fs/befs/endian.h=88=static inline befs_disk_block_run
fs/befs/endian.h:89:cpu_to_fsrun(const struct super_block *sb, befs_block_run n)
fs/befs/endian.h-90-{
]
|
| 231/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 17143
output: 30
thoughts: 14
Thoughts: Here's a summary of my thought process, as if I were the one thinking it:
**Defining `befs_block_run`**
Okay, so I need to understand what `befs_block_run` actually *is*. This sounds like something specific within a file system or storage context, likely related to the BEFS file system. My initial instinct is to dig into the BEFS documentation, if it exists, or look for source code where BEFS is implemented. I need to understand the function this term describes. Is it related to how blocks of data are handled, allocated, deallocated, or accessed? Is this some internal function name? The goal is to get a solid definition so I know what I'm dealing with. From there, I can figure out its purpose. I'll need to look for any clues regarding BEFS, this `block_run`, and any function names that sound like they would relate.
|
| 232/5 |
2026/08/26 18:26 |
tool |
grepper |
0m
Args: map[Expression:befs_block_run PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-50- /* Journal log entry */
fs/befs/befs.h:51: befs_block_run log_blocks;
fs/befs/befs.h-52- befs_off_t log_start;
--
fs/befs/befs_fs_types.h=101=typedef struct {
--
fs/befs/befs_fs_types.h-104- u16 len;
fs/befs/befs_fs_types.h:105:} PACKED befs_block_run;
fs/befs/befs_fs_types.h-106-
fs/befs/befs_fs_types.h=107=typedef befs_disk_block_run befs_disk_inode_addr;
fs/befs/befs_fs_types.h:108:typedef befs_block_run befs_inode_addr;
fs/befs/befs_fs_types.h-109-
--
fs/befs/befs_fs_types.h=157=typedef struct {
fs/befs/befs_fs_types.h:158: befs_block_run direct[BEFS_NUM_DIRECT_BLOCKS];
fs/befs/befs_fs_types.h-159- befs_off_t max_direct_range;
fs/befs/befs_fs_types.h:160: befs_block_run indirect;
fs/befs/befs_fs_types.h-161- befs_off_t max_indirect_range;
fs/befs/befs_fs_types.h:162: befs_block_run double_indirect;
fs/befs/befs_fs_types.h-163- befs_off_t max_double_indirect_range;
--
fs/befs/datastream.c=24=static int befs_find_brun_direct(struct super_block *sb,
fs/befs/datastream.c-25- const befs_data_stream *data,
fs/befs/datastream.c:26: befs_blocknr_t blockno, befs_block_run *run);
fs/befs/datastream.c-27-
fs/befs/datastream.c=28=static int befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-30- befs_blocknr_t blockno,
fs/befs/datastream.c:31: befs_block_run *run);
fs/befs/datastream.c-32-
fs/befs/datastream.c=33=static int befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-35- befs_blocknr_t blockno,
fs/befs/datastream.c:36: befs_block_run *run);
fs/befs/datastream.c-37-
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-52- struct buffer_head *bh;
fs/befs/datastream.c:53: befs_block_run run;
fs/befs/datastream.c-54- befs_blocknr_t block; /* block coresponding to pos */
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.c:96: befs_blocknr_t fblock, befs_block_run *run)
fs/befs/datastream.c-97-{
--
fs/befs/datastream.c=251=befs_find_brun_direct(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.c:252: befs_blocknr_t blockno, befs_block_run *run)
fs/befs/datastream.c-253-{
fs/befs/datastream.c-254- int i;
fs/befs/datastream.c:255: const befs_block_run *array = data->direct;
fs/befs/datastream.c-256- befs_blocknr_t sum;
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-307- befs_blocknr_t blockno,
fs/befs/datastream.c:308: befs_block_run *run)
fs/befs/datastream.c-309-{
--
fs/befs/datastream.c-316-
fs/befs/datastream.c:317: befs_block_run indirect = data->indirect;
fs/befs/datastream.c-318- befs_blocknr_t indirblockno = iaddr2blockno(sb, &indirect);
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-416- befs_blocknr_t blockno,
fs/befs/datastream.c:417: befs_block_run *run)
fs/befs/datastream.c-418-{
--
fs/befs/datastream.c-429- struct buffer_head *indir_block;
fs/befs/datastream.c:430: befs_block_run indir_run;
fs/befs/datastream.c-431- befs_disk_inode_addr *iaddr_array;
--
fs/befs/datastream.h=11=int befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.h:12: befs_blocknr_t fblock, befs_block_run *run);
fs/befs/datastream.h-13-
--
fs/befs/debug.c=72=befs_dump_inode(const struct super_block *sb, befs_inode *inode)
--
fs/befs/debug.c-75-
fs/befs/debug.c:76: befs_block_run tmp_run;
fs/befs/debug.c-77-
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-159-
fs/befs/debug.c:160: befs_block_run tmp_run;
fs/befs/debug.c-161-
--
fs/befs/debug.c=213=befs_dump_run(const struct super_block *sb, befs_disk_block_run run)
--
fs/befs/debug.c-216-
fs/befs/debug.c:217: befs_block_run n = fsrun_to_cpu(sb, run);
fs/befs/debug.c-218-
--
fs/befs/endian.h=61=cpu_to_fs16(const struct super_block *sb, u16 n)
--
fs/befs/endian.h-70-
fs/befs/endian.h:71:static inline befs_block_run
fs/befs/endian.h-72-fsrun_to_cpu(const struct super_block *sb, befs_disk_block_run n)
fs/befs/endian.h-73-{
fs/befs/endian.h:74: befs_block_run run;
fs/befs/endian.h-75-
--
fs/befs/endian.h=88=static inline befs_disk_block_run
fs/befs/endian.h:89:cpu_to_fsrun(const struct super_block *sb, befs_block_run n)
fs/befs/endian.h-90-{
--
fs/befs/linuxvfs.c=134=befs_get_block(struct inode *inode, sector_t block,
--
fs/befs/linuxvfs.c-138- befs_data_stream *ds = &BEFS_I(inode)->i_data.ds;
fs/befs/linuxvfs.c:139: befs_block_run run = BAD_IADDR;
fs/befs/linuxvfs.c-140- int res;
]
|
| 233/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 19691
output: 40
thoughts: 29
Thoughts: Okay, here's my interpretation of what's going on, thinking through it as if it's my own internal monologue:
**Diving into the BEFS Filesystem Type Definitions**
Alright, time to get a grip on this BEFS file system stuff. I need to understand how it's structured at a fundamental level, so let's jump right into the header file. I know that's where the core data structures and types are typically declared. Specifically, I'm zeroing in on lines 101 through 106 of `fs/befs/befs_fs_types.h`. This is where the magic (or at least, the basic building blocks) usually happen. I'm expecting to find the key data structures that define the BEFS file system's on-disk format, its superblocks, inode definitions, perhaps some key flags or enumerations, or maybe some type definitions like block sizes or offsets. I'm hoping it's well-commented, but even if it's not, I'm ready to parse it and build a mental model of the BEFS architecture from the ground up, starting with the very heart of the filesystem. Let's see what gems are hidden there...
|
| 234/5 |
2026/08/26 18:26 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:95 LineCount:20]
Results: map[Contents: 95: typedef struct {
96: fs32 allocation_group;
97: fs16 start;
98: fs16 len;
99: } PACKED befs_disk_block_run;
100:
101: typedef struct {
102: u32 allocation_group;
103: u16 start;
104: u16 len;
105: } PACKED befs_block_run;
106:
107: typedef befs_disk_block_run befs_disk_inode_addr;
108: typedef befs_block_run befs_inode_addr;
109:
110: /*
111: * The Superblock Structure
112: */
113: typedef struct {
114: char name[B_OS_NAME_LENGTH];
]
|
| 235/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 20285
output: 31
thoughts: 18
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Investigating bef_blocknr_t**
Okay, let's dive right in. My first thought is to pinpoint the definition of `befs_blocknr_t`. I need to understand this fundamental type within the BEFS filesystem implementation. It’s the block number type, so understanding its size and underlying representation is crucial for any deeper analysis or debugging I might undertake. I'm going to look for its declaration; likely a `typedef` somewhere in the BEFS header files. The specifics – is it a `uint32_t`, `uint64_t`, or something else entirely? – will significantly influence how the block allocation and addressing schemes are designed, and I know that. Determining its type will allow me to assess potential size limitations, overflow vulnerabilities, or architectural constraints imposed by this choice. This is the starting point for really digging into this piece of code.
|
| 236/5 |
2026/08/26 18:26 |
tool |
grepper |
0m
Args: map[Expression:befs_blocknr_t PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h-17-
fs/befs/befs.h:18:typedef u64 befs_blocknr_t;
fs/befs/befs.h-19-/*
--
fs/befs/befs.h=117=BEFS_I(const struct inode *inode)
--
fs/befs/befs.h-121-
fs/befs/befs.h:122:static inline befs_blocknr_t
fs/befs/befs.h-123-iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
--
fs/befs/befs.h=129=static inline befs_inode_addr
fs/befs/befs.h:130:blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
fs/befs/befs.h-131-{
--
fs/befs/datastream.c=24=static int befs_find_brun_direct(struct super_block *sb,
fs/befs/datastream.c-25- const befs_data_stream *data,
fs/befs/datastream.c:26: befs_blocknr_t blockno, befs_block_run *run);
fs/befs/datastream.c-27-
fs/befs/datastream.c=28=static int befs_find_brun_indirect(struct super_block *sb,
fs/befs/datastream.c-29- const befs_data_stream *data,
fs/befs/datastream.c:30: befs_blocknr_t blockno,
fs/befs/datastream.c-31- befs_block_run *run);
--
fs/befs/datastream.c=33=static int befs_find_brun_dblindirect(struct super_block *sb,
fs/befs/datastream.c-34- const befs_data_stream *data,
fs/befs/datastream.c:35: befs_blocknr_t blockno,
fs/befs/datastream.c-36- befs_block_run *run);
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-53- befs_block_run run;
fs/befs/datastream.c:54: befs_blocknr_t block; /* block coresponding to pos */
fs/befs/datastream.c-55-
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.c:96: befs_blocknr_t fblock, befs_block_run *run)
fs/befs/datastream.c-97-{
--
fs/befs/datastream.c=130=befs_read_lsymlink(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-170-
fs/befs/datastream.c:171:befs_blocknr_t
fs/befs/datastream.c-172-befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
fs/befs/datastream.c-173-{
fs/befs/datastream.c:174: befs_blocknr_t blocks;
fs/befs/datastream.c:175: befs_blocknr_t datablocks; /* File data blocks */
fs/befs/datastream.c:176: befs_blocknr_t metablocks; /* FS metadata blocks */
fs/befs/datastream.c-177- struct befs_sb_info *befs_sb = BEFS_SB(sb);
--
fs/befs/datastream.c=251=befs_find_brun_direct(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.c:252: befs_blocknr_t blockno, befs_block_run *run)
fs/befs/datastream.c-253-{
--
fs/befs/datastream.c-255- const befs_block_run *array = data->direct;
fs/befs/datastream.c:256: befs_blocknr_t sum;
fs/befs/datastream.c-257-
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
fs/befs/datastream.c-306- const befs_data_stream *data,
fs/befs/datastream.c:307: befs_blocknr_t blockno,
fs/befs/datastream.c-308- befs_block_run *run)
--
fs/befs/datastream.c-310- int i, j;
fs/befs/datastream.c:311: befs_blocknr_t sum = 0;
fs/befs/datastream.c:312: befs_blocknr_t indir_start_blk;
fs/befs/datastream.c:313: befs_blocknr_t search_blk;
fs/befs/datastream.c-314- struct buffer_head *indirblock;
--
fs/befs/datastream.c-317- befs_block_run indirect = data->indirect;
fs/befs/datastream.c:318: befs_blocknr_t indirblockno = iaddr2blockno(sb, &indirect);
fs/befs/datastream.c-319- int arraylen = befs_iaddrs_per_block(sb);
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
fs/befs/datastream.c-415- const befs_data_stream *data,
fs/befs/datastream.c:416: befs_blocknr_t blockno,
fs/befs/datastream.c-417- befs_block_run *run)
--
fs/befs/datastream.c-426- off_t dblindir_leftover;
fs/befs/datastream.c:427: befs_blocknr_t blockno_at_run_start;
fs/befs/datastream.c-428- struct buffer_head *dbl_indir_block;
--
fs/befs/datastream.c-432-
fs/befs/datastream.c:433: befs_blocknr_t indir_start_blk =
fs/befs/datastream.c-434- data->max_indirect_range >> BEFS_SB(sb)->block_shift;
--
fs/befs/datastream.h=11=int befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
fs/befs/datastream.h:12: befs_blocknr_t fblock, befs_block_run *run);
fs/befs/datastream.h-13-
fs/befs/datastream.h=14=size_t befs_read_lsymlink(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.h-16-
fs/befs/datastream.h:17:befs_blocknr_t befs_count_blocks(struct super_block *sb,
fs/befs/datastream.h-18- const befs_data_stream *ds);
--
fs/befs/inode.c=19=befs_check_inode(struct super_block *sb, befs_inode *raw_inode,
fs/befs/inode.c:20: befs_blocknr_t inode)
fs/befs/inode.c-21-{
--
fs/befs/inode.h=6=int befs_check_inode(struct super_block *sb, befs_inode *raw_inode,
fs/befs/inode.h:7: befs_blocknr_t inode);
--
fs/befs/io.c=27=befs_bread_iaddr(struct super_block *sb, befs_inode_addr iaddr)
--
fs/befs/io.c-29- struct buffer_head *bh;
fs/befs/io.c:30: befs_blocknr_t block;
fs/befs/io.c-31- struct befs_sb_info *befs_sb = BEFS_SB(sb);
]
|
| 237/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 22838
output: 34
thoughts: 57
Thoughts: Here's my take on those thought processes:
**Delving into BEFS Superblock Allocation**
Okay, so I'm thinking about how the BEFS filesystem handles its superblock and its allocation strategy. I need to get a clear picture of how these key variables interact – specifically, `ag_shift`, `blocks_per_ag`, `block_shift`, and `block_size`. I want to understand how these values shape the allocation process, how they define the granularity of allocation groups (AGs), and how that then maps to individual blocks. The relationships here are critical for overall performance and space efficiency within the filesystem.
To dig into this, I'll need to jump into the source code. Let's start by looking closely at `befs_load_sb` function. I will go directly to `fs/befs/super.c`. I want to see precisely how the superblock is loaded and initialized, and, crucially, how those allocation-related parameters are derived and stored during mount. This is the lynchpin – the loading and interpretation of the superblock data and its effect on initial setup, and subsequently, during runtime. I need to get a strong grasp on the implications of these variables at boot time and their role later.
|
| 238/5 |
2026/08/26 18:26 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:1 LineCount:60]
Results: map[Contents: 1: /*
2: * super.c
3: *
4: * Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
5: *
6: * Licensed under the GNU GPL. See the file COPYING for details.
7: *
8: */
9:
10: #include <linux/fs.h>
11: #include <asm/page.h> /* for PAGE_SIZE */
12:
13: #include "befs.h"
14: #include "super.h"
15:
16: /*
17: * befs_load_sb -- Read from disk and properly byteswap all the fields
18: * of the befs superblock
19: */
20: int
21: befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
22: {
23: struct befs_sb_info *befs_sb = BEFS_SB(sb);
24:
25: /* Check the byte order of the filesystem */
26: if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_LE)
27: befs_sb->byte_order = BEFS_BYTESEX_LE;
28: else if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_BE)
29: befs_sb->byte_order = BEFS_BYTESEX_BE;
30:
31: befs_sb->magic1 = fs32_to_cpu(sb, disk_sb->magic1);
32: befs_sb->magic2 = fs32_to_cpu(sb, disk_sb->magic2);
33: befs_sb->magic3 = fs32_to_cpu(sb, disk_sb->magic3);
34: befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
36: befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
37: befs_sb->used_blocks = fs64_to_cpu(sb, disk_sb->used_blocks);
38: befs_sb->inode_size = fs32_to_cpu(sb, disk_sb->inode_size);
39:
40: befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
42: befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
43:
44: befs_sb->flags = fs32_to_cpu(sb, disk_sb->flags);
45:
46: befs_sb->log_blocks = fsrun_to_cpu(sb, disk_sb->log_blocks);
47: befs_sb->log_start = fs64_to_cpu(sb, disk_sb->log_start);
48: befs_sb->log_end = fs64_to_cpu(sb, disk_sb->log_end);
49:
50: befs_sb->root_dir = fsrun_to_cpu(sb, disk_sb->root_dir);
51: befs_sb->indices = fsrun_to_cpu(sb, disk_sb->indices);
52: befs_sb->nls = NULL;
53:
54: return BEFS_OK;
55: }
56:
57: int
58: befs_check_sb(struct super_block *sb)
59: {
60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
]
|
| 239/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 24306
output: 20
thoughts: 27
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing BEFS Superblock History in Git**
Okay, time to dive into the BEFS superblock code. I need to get a handle on the historical context before I start poking around too deeply. The best way to do this, as always, is a deep dive into the Git log. I'm thinking I'll start with `fs/befs/super.c` specifically, but I'll broaden the search to include related files as well. The key here is to understand the established conventions – how the code *should* behave, the reasoning behind existing fixes, and the architectural decisions that have been made in the past. I want to identify the common patterns in commits affecting this area, look for any common bugs, and generally get an intuition for what's going on. This is all about getting a solid base of knowledge before I start trying to make changes or debug anything. Let's see what the commit history reveals.
|
| 240/5 |
2026/08/26 18:26 |
tool |
git-log |
0m
Args:
Results: map[Output:7597d42a2533 befs: handle set_blocksize failures
0b2600f81cef treewide: change inode->i_ino from unsigned long to u64
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
ca4388bf1d9e fs: add setlease to generic_ro_fops and read-only filesystem directory operations
b4dbfd8653b3 Coccinelle-based conversion to use ->i_state accessors
c3099e72bf4f befs: convert befs to use the new mount api
263cf5780497 befs: Convert befs_symlink_read_folio() to use folio_end_read()
f88c3fb81c4b mm, slab: remove last vestiges of SLAB_MEM_SPREAD
f6c8bfcf951f befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
]
|
| 241/5 |
2026/08/26 18:26 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 24854
output: 27
thoughts: 1484
Thoughts: **Analyzing the BEFS Patch: Addressing Potential Integer Overflow and Ensuring Consistency**
Okay, let's break this down. My initial thought is to make sure this patch is addressing a real issue. Let me carefully re-examine the code and consider its implications:
The diff introduces changes to `befs.h` and `super.c`. First, the change to `befs.h`: `iaddr2blockno` and `blockno2iaddr`. The casts to `befs_blocknr_t` seem like they address a potential integer overflow. This is critical. Without the cast, if `iaddr->allocation_group` is large enough, the shift and addition could wrap around. Casting ensures that we are using a wider type to perform the intermediate calculation, preventing the wrap. Good catch.
Now, the changes to `super.c`. The core of the modification lies within the `befs_check_sb` function. This is about validating the superblock's integrity. The primary concern here seems to be the comparison between `block_shift` and `block_size`, and `ag_shift` and `blocks_per_ag`. The crucial change is guarding against potentially undefined behavior due to bit shifts. In the original code, `(1 << befs_sb->block_shift)` could lead to undefined behavior if `befs_sb->block_shift` is 32 or greater (on a 32-bit `int` architecture), as shifting by the bit-width of the type is undefined. The new code correctly prevents this UB. By adding the short-circuiting check (`befs_sb->block_shift >= 32 || ...`), we first check for the potentially problematic large shift, short-circuiting and reporting an error before the shift operation.
Similar logic applies to `ag_shift`. If `ag_shift` is 32 or greater, shifting 1 left by that value results in undefined behavior. The patch first checks if `ag_shift >= 32` and then returns an error, preventing the UB.
The original code considered the discrepancy between the calculated value based on `ag_shift` and `blocks_per_ag` as a non-fatal warning. The patch preserves this behavior, but, crucially, prevents undefined behavior from the shift.
Essentially, the patch provides stricter error checking to prevent undefined behavior and potential data corruption and, with the added casts, guarantees the bit-shift operations are performed correctly. It's a solid, safe improvement, and essential for long-term reliability and robustness of the filesystem.
|
| 242/5 |
2026/08/26 18:27 |
tool |
grepper |
0m
Args: map[Expression:ag_shift PathPrefix:fs/befs]
Results: map[Output:fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-43- u32 blocks_per_ag;
fs/befs/befs.h:44: u32 ag_shift;
fs/befs/befs.h-45- u32 num_ags;
--
fs/befs/befs.h=123=iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
fs/befs/befs.h-124-{
fs/befs/befs.h:125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
fs/befs/befs.h-126- iaddr->start);
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h-135- iaddr.start =
fs/befs/befs.h:136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h-137- iaddr.len = 1;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-127- fs32 blocks_per_ag;
fs/befs/befs_fs_types.h:128: fs32 ag_shift;
fs/befs/befs_fs_types.h-129- fs32 num_ags;
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-178- fs32_to_cpu(sb, sup->blocks_per_ag));
fs/befs/debug.c:179: befs_debug(sb, " ag_shift %u", fs32_to_cpu(sb, sup->ag_shift));
fs/befs/debug.c-180- befs_debug(sb, " num_ags %u", fs32_to_cpu(sb, sup->num_ags));
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-40- befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
fs/befs/super.c:41: befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
fs/befs/super.c-42- befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-102-
fs/befs/super.c:103: /* ag_shift also encodes the same information as blocks_per_ag in a
fs/befs/super.c-104- * different way, non-fatal consistency check
fs/befs/super.c-105- */
fs/befs/super.c:106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
fs/befs/super.c:107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
fs/befs/super.c-108-
]
|
| 243/5 |
2026/08/26 18:27 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 27958
output: 30
thoughts: 610
Thoughts: **Analyzing the Use of `ag_shift` in the BEFS Filesystem Code**
Okay, let's break this down. I'm focusing on how `ag_shift` is being used in the BEFS filesystem code. From the code analysis, I've identified that `ag_shift` is critical and appears in three functions: `befs_check_sb()`, `iaddr2blockno()`, and `blockno2iaddr()`. The first one I'm using as a check, because I know `ag_shift >= 32` will cause an error return. The core of my interest lies in how it's used to convert between inode addresses and block numbers.
Looking at `iaddr2blockno()`, it's clear that the calculation `((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) + iaddr->start` forms the block number. Here, `iaddr->allocation_group` is a `u32` (unsigned 32-bit integer), `iaddr->start` is `u16` (unsigned 16-bit integer), and `befs_blocknr_t` is `u64` (unsigned 64-bit integer). Since `ag_shift` is guaranteed to be less than 32, the left bit shift won't cause any truncation issues because the intermediate calculation happens in 64 bits. A critical point is that because of the super block check function, `ag_shift` can't be greater than 31.
Now, let's move on to `blockno2iaddr()`. This is where we go in the other direction - from a block number to an inode address. The calculation is more nuanced. I'm seeing that we have the block number (`blockno`, a `u64`), and from it we extract the allocation group and starting block number. The crucial operation here is the right bit shift: `blockno >> BEFS_SB(sb)->ag_shift`. The allocation group is then assigned the result, and the start is the remainder, `blockno % (1 << ag_shift)`. Here, the right bit shift gives a u64, and then it is assigned to iaddr.allocation_group which is u32, which results in truncation. So this operation is safe. The remainder calculation, however, ensures the `iaddr.start` (u16) is a valid offset within the allocation group.
Finally, I need to check where `befs_check_sb` is called. That should give me a better understanding of how the validity of `ag_shift` is maintained and when the check is performed.
|
| 244/5 |
2026/08/26 18:27 |
tool |
grepper |
0m
Args: map[Expression:befs_check_sb PathPrefix:fs/befs]
Results: map[Output:fs/befs/linuxvfs.c=780=befs_fill_super(struct super_block *sb, struct fs_context *fc)
--
fs/befs/linuxvfs.c-842- if ((befs_load_sb(sb, disk_sb) != BEFS_OK) ||
fs/befs/linuxvfs.c:843: (befs_check_sb(sb) != BEFS_OK))
fs/befs/linuxvfs.c-844- goto unacquire_bh;
--
fs/befs/super.c=57=int
fs/befs/super.c:58:befs_check_sb(struct super_block *sb)
fs/befs/super.c-59-{
--
fs/befs/super.h=5=int befs_load_sb(struct super_block *sb, befs_super_block *disk_sb);
fs/befs/super.h:6:int befs_check_sb(struct super_block *sb);
]
|
| 245/5 |
2026/08/26 18:27 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 29454
output: 38
thoughts: 32
Thoughts: Okay, let's dive into this. I need to understand how the BEFS filesystem handles errors during super block filling. Specifically, I'm going to jump into the `fs/befs/linuxvfs.c` file and look at the `befs_fill_super` function. I want to see *exactly* how they've coded the error handling in that part of the process. I'm looking for the standard checks, error propagation techniques (return codes, `goto` statements, etc.), and any specific BEFS-related tricks they might employ. I'm particularly interested in how they deal with potentially corrupt superblocks or other critical issues that could arise during mount. Time to get my hands dirty and examine the code.
|
| 246/5 |
2026/08/26 18:27 |
tool |
read-file |
0m
Args: map[File:fs/befs/linuxvfs.c FirstLine:835 LineCount:50]
Results: map[Contents: 835: befs_debug(sb, "Using PPC superblock location");
836: } else {
837: befs_debug(sb, "Using x86 superblock location");
838: disk_sb =
839: (befs_super_block *) ((void *) bh->b_data + x86_sb_off);
840: }
841:
842: if ((befs_load_sb(sb, disk_sb) != BEFS_OK) ||
843: (befs_check_sb(sb) != BEFS_OK))
844: goto unacquire_bh;
845:
846: befs_dump_super_block(sb, disk_sb);
847:
848: brelse(bh);
849:
850: if (befs_sb->num_blocks > ~((sector_t)0)) {
851: if (!silent)
852: befs_error(sb, "blocks count: %llu is larger than the host can use",
853: befs_sb->num_blocks);
854: goto unacquire_priv_sbp;
855: }
856:
857: /*
858: * set up enough so that it can read an inode
859: * Fill in kernel superblock fields from private sb
860: */
861: sb->s_magic = BEFS_SUPER_MAGIC;
862: /* Set real blocksize of fs */
863: if (!sb_set_blocksize(sb, (ulong) befs_sb->block_size))
864: goto unacquire_priv_sbp;
865: sb->s_op = &befs_sops;
866: sb->s_export_op = &befs_export_operations;
867: sb->s_time_min = 0;
868: sb->s_time_max = 0xffffffffffffll;
869: root = befs_iget(sb, iaddr2blockno(sb, &(befs_sb->root_dir)));
870: if (IS_ERR(root)) {
871: ret = PTR_ERR(root);
872: goto unacquire_priv_sbp;
873: }
874: sb->s_root = d_make_root(root);
875: if (!sb->s_root) {
876: if (!silent)
877: befs_error(sb, "get root inode failed");
878: goto unacquire_priv_sbp;
879: }
880:
881: /* load nls library */
882: if (befs_sb->mount_opts.iocharset) {
883: befs_debug(sb, "Loading nls: %s",
884: befs_sb->mount_opts.iocharset);
]
|
| 247/5 |
2026/08/26 18:27 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 30518
output: 27
thoughts: 103
Thoughts: **Debugging a BEFS Filesystem Mount Failure**
Okay, so `befs_check_sb` is kicking back a `BEFS_ERR`, which is then causing `befs_fill_super` to bail out with a `goto unacquire_bh;`. That's not a clean mount failure, we need to understand *why* `befs_check_sb` is unhappy. The likely culprit is something related to superblock parameters, such as the block shift or allocation group shift, since these are often a source of initialization problems.
To understand the problem better, I should check whether there are any other instances where `block_shift`, `ag_shift`, or any other critical superblock values are *used* or *validated* within the `fs/befs` code. Let's start with a focused search for `block_shift` specifically, within the `fs/befs` directory. We need to see if anything else touches this variable.
|
| 248/5 |
2026/08/26 18:27 |
tool |
grepper |
0m
Args: map[Expression:block_shift PathPrefix:fs/befs]
Results: map[Output:fs/befs/ChangeLog=204=Version 0.4 (2001-10-28)
--
fs/befs/ChangeLog-362-* Added additional consitency checks on mount
fs/befs/ChangeLog:363: Check block_size agrees with block_shift
fs/befs/ChangeLog-364- Check flags == BEFS_CLEAN
--
fs/befs/befs.h=32=struct befs_sb_info {
--
fs/befs/befs.h-34- u32 block_size;
fs/befs/befs.h:35: u32 block_shift;
fs/befs/befs.h-36- int byte_order;
--
fs/befs/befs_fs_types.h=113=typedef struct {
--
fs/befs/befs_fs_types.h-118- fs32 block_size;
fs/befs/befs_fs_types.h:119: fs32 block_shift;
fs/befs/befs_fs_types.h-120-
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-56- befs_debug(sb, "---> %s %llu", __func__, pos);
fs/befs/datastream.c:57: block = pos >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-58- if (off)
fs/befs/datastream.c:59: *off = pos - (block << BEFS_SB(sb)->block_shift);
fs/befs/datastream.c-60-
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.c-98- int err;
fs/befs/datastream.c:99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-100-
--
fs/befs/datastream.c=172=befs_count_blocks(struct super_block *sb, const befs_data_stream *ds)
--
fs/befs/datastream.c-180-
fs/befs/datastream.c:181: datablocks = ds->size >> befs_sb->block_shift;
fs/befs/datastream.c-182- if (ds->size & (befs_sb->block_size - 1))
--
fs/befs/datastream.c=305=befs_find_brun_indirect(struct super_block *sb,
--
fs/befs/datastream.c-322-
fs/befs/datastream.c:323: indir_start_blk = data->max_direct_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-324- search_blk = blockno - indir_start_blk;
--
fs/befs/datastream.c=414=befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-433- befs_blocknr_t indir_start_blk =
fs/befs/datastream.c:434: data->max_indirect_range >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-435-
--
fs/befs/debug.c=156=befs_dump_super_block(const struct super_block *sb, befs_super_block *sup)
--
fs/befs/debug.c-169- befs_debug(sb, " block_size %u", fs32_to_cpu(sb, sup->block_size));
fs/befs/debug.c:170: befs_debug(sb, " block_shift %u", fs32_to_cpu(sb, sup->block_shift));
fs/befs/debug.c-171-
--
fs/befs/super.c=21=befs_load_sb(struct super_block *sb, befs_super_block *disk_sb)
--
fs/befs/super.c-34- befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
fs/befs/super.c:35: befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
fs/befs/super.c-36- befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
--
fs/befs/super.c=58=befs_check_sb(struct super_block *sb)
--
fs/befs/super.c-91- /*
fs/befs/super.c:92: * block_shift and block_size encode the same information
fs/befs/super.c-93- * in different ways as a consistency check.
--
fs/befs/super.c-95-
fs/befs/super.c:96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
fs/befs/super.c:97: befs_error(sb, "block_shift disagrees with block_size. "
fs/befs/super.c-98- "Corruption likely.");
]
|
| 249/5 |
2026/08/26 18:27 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 32314
output: 41
thoughts: 59
Thoughts: Okay, let's dive into this.
**Examining BEFS Shift Fields**
Alright, my first thought is to take a look at the `befs_sb_info` and `befs_super_block` structures. I need to quickly determine if there are any other fields defined within them that are related to shifting. We need to be exhaustive here, I don't want to miss anything potentially relevant to the problem at hand. Now that I have decided this, I'll need to double check the super block's definition.
Therefore, the next step is to pinpoint the exact location of the `befs_super_block` definition. I'll need to consult `fs/befs/befs_fs_types.h` to make sure I have the accurate structure definition. It's crucial to reference the source code for definitive answers and avoid any assumptions. With the information from the header file, I can examine the fields within `befs_super_block` and identify all of those that concern shifting.
|
| 250/5 |
2026/08/26 18:27 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs_fs_types.h FirstLine:110 LineCount:40]
Results: map[Contents: 110: /*
111: * The Superblock Structure
112: */
113: typedef struct {
114: char name[B_OS_NAME_LENGTH];
115: fs32 magic1;
116: fs32 fs_byte_order;
117:
118: fs32 block_size;
119: fs32 block_shift;
120:
121: fs64 num_blocks;
122: fs64 used_blocks;
123:
124: fs32 inode_size;
125:
126: fs32 magic2;
127: fs32 blocks_per_ag;
128: fs32 ag_shift;
129: fs32 num_ags;
130:
131: fs32 flags;
132:
133: befs_disk_block_run log_blocks;
134: fs64 log_start;
135: fs64 log_end;
136:
137: fs32 magic3;
138: befs_disk_inode_addr root_dir;
139: befs_disk_inode_addr indices;
140:
141: } PACKED befs_super_block;
142:
143: /*
144: * Note: the indirect and dbl_indir block_runs may
145: * be longer than one block!
146: */
147: typedef struct {
148: befs_disk_block_run direct[BEFS_NUM_DIRECT_BLOCKS];
149: fs64 max_direct_range;
]
|
| 251/5 |
2026/08/26 18:27 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 33149
output: 19
thoughts: 1725
Thoughts: **Superblock Validation Deep Dive**
Okay, let's break down this `befs_check_sb` function. My initial thought is to confirm the integrity of the BEFS superblock at mount time. First, I check those magic headers – make sure they're what we expect. Then, I validate the block size, ensuring it's one of the supported values (1024, 2048, 4096, or 8192) and that it doesn't exceed the system page size, a crucial sanity check.
Next, there's a consistency check on `block_shift` and `block_size`. I'm making sure these values, which represent the same thing in different ways, agree. The `block_shift` value can't be greater or equal to 32, and the calculation using the bit shift must equal the `block_size`. This helps avoid potential corruption. The same thing is repeated for `ag_shift` and `blocks_per_ag`, with a similar verification and error.
Finally, I look at the journal state. If the log start and end aren't the same or if the `BEFS_DIRTY` flag is set, the filesystem isn't clean, and I will report an error to prevent further issues.
Now, checking this against architectural guidelines, this is a textbook example of superblock validation, a defensive measure implemented during mount. It fits perfectly. No resource unwinding issues here, and definitely no ownership issues.
I'm also double-checking potential pitfalls. The bit shifts in the code look fine. The `1U << befs_sb->block_shift` and `1U << befs_sb->ag_shift` are well-defined as the shift exponent is guaranteed to be in the valid range of `[0, 31]`. The comparison involves unsigned types, which is what I expect.
Then, there is the check for potential 32-bit truncation fixes in `iaddr2blockno` and `blockno2iaddr`. I ensure that the `allocation_group` is properly cast to a 64-bit type before the shift. This is crucial for handling large block numbers, which is essential to avoid potential overflow or wraparound issues.
Everything looks solid. This is a clean fix. It addresses the root of the problem directly during validation, which is exactly where it needs to be to prevent undefined behavior.
I'm ready to approve this. All checks are green. This looks good.
|
| 252/5 |
2026/08/26 18:27 |
tool |
set-results |
0m
Args: map[ReviewApproved:true ReviewComments:[]]
Results: map[ReviewApproved:true ReviewComments:[]]
|
| 253/4 |
2026/08/26 18:27 |
action |
evaluate-patch-review |
0m
Results: map[NeedsIteration:false ReviewFeedback:]
|
| 254/1 |
2026/08/26 18:27 |
action |
apply-patch |
0m
Results:
|
| 255/1 |
2026/08/26 18:27 |
action |
init-style-items |
0m
Results:
|
| 256/1 |
2026/08/26 18:27 |
loop |
|
0m
|
| 257/2 |
2026/08/26 18:27 |
iteration |
0 |
0m
|
| 258/3 |
2026/08/26 18:27 |
agent |
patch-formatter |
0m
Model:
Instruction:
You are an expert Linux kernel developer tasked with formatting a kernel patch.
Your objective is purely formatting: you must ensure the patch complies with the kernel's coding style,
conforms to the surrounding code rules, and passes checkpatch.pl, while preserving the code logic exactly as it is.
You should stop once the requested formatting changes are done and checkpatch.pl is happy.
Do not question the requested changes unless they are obviously wrong.
If the code already conforms to the requested changes, surrounding code rules,
and checkpatch.pl is happy, you should just finish your task.
WARNING: The clang-format tool may break the formatting of the surrounding code (like manual alignment).
Use it with caution. We want to make the change fit into the existing formatting as much as possible.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The current patch diff is:
diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
Use the provided tools to format the patch.
Reply: The patch has been verified and complies with the Linux kernel coding style and surrounding code conventions:
- Proper integer type casting `(befs_blocknr_t)` and unsigned shift constants `1U << ...` are correctly formatted.
- Boundary checks and error-handling blocks adhere to kernel formatting standards.
- `scripts/checkpatch.pl` reports 0 errors and 0 warnings.
|
| 259/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 5201
output: 19
thoughts: 17
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Assessing the Current Patching Landscape**
Alright, before I dive in, I need to get a clear picture. The first step, as always, is a quick sanity check. I need to understand the codebase's current state relative to the proposed changes. Let's run `checkpatch` – it's crucial to identify any style violations, potential coding errors, or deviations from the established coding guidelines *before* I even start scrutinizing the actual logic. A clean, well-formatted patch is a joy to work with, and catching those issues early saves so much time and headaches down the line. I always prefer to be efficient and prevent distractions.
Then, to get a handle on *what* is actually being proposed, a quick `patch-diff` is necessary. A well-formatted diff will quickly show me the specific lines that have been added, removed, or modified. I'm looking for the scope of the change: is this a minor bug fix, a significant feature addition, or something in between? Are the changes localized, or do they ripple throughout multiple parts of the system? I need to quickly ascertain the level of complexity and potential impact.
|
| 260/4 |
2026/08/26 18:27 |
tool |
patch-diff |
0m
Error:
|
| 261/4 |
2026/08/26 18:27 |
tool |
checkpatch |
0m
Results: map[Output:total: 0 errors, 0 warnings, 41 lines checked
Your patch has no obvious style problems and is ready for submission.
]
|
| 262/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 5557
output: 15
thoughts: 16
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Analyzing the Proposed Patch**
Right, so I need to examine the changes proposed for this file. My first thought is to call the `patch-diff` utility, with the filename specified as "". This is the canonical way to get the actual diff output. I'm assuming, of course, that the tool is correctly configured and has access to the appropriate base version (likely stored in version control or a previous state). I expect to see a unified diff format. Knowing this, I can begin to interpret how the code changes and impacts the program.
|
| 263/4 |
2026/08/26 18:27 |
tool |
patch-diff |
0m
Args:
Results: map[Output:diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -115,32 +115,32 @@ BEFS_SB(const struct super_block *super)
static inline struct befs_inode_info *
BEFS_I(const struct inode *inode)
{
return container_of(inode, struct befs_inode_info, vfs_inode);
}
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
static inline unsigned int
befs_iaddrs_per_block(struct super_block *sb)
{
return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
}
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -58,61 +58,66 @@ int
befs_check_sb(struct super_block *sb)
{
struct befs_sb_info *befs_sb = BEFS_SB(sb);
/* Check magic headers of super block */
if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
|| (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
|| (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
befs_error(sb, "invalid magic header");
return BEFS_ERR;
}
/*
* Check blocksize of BEFS.
*
* Blocksize of BEFS is 1024, 2048, 4096 or 8192.
*/
if ((befs_sb->block_size != 1024)
&& (befs_sb->block_size != 2048)
&& (befs_sb->block_size != 4096)
&& (befs_sb->block_size != 8192)) {
befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
return BEFS_ERR;
}
if (befs_sb->block_size > PAGE_SIZE) {
befs_error(sb, "blocksize(%u) cannot be larger "
"than system pagesize(%lu)", befs_sb->block_size,
PAGE_SIZE);
return BEFS_ERR;
}
/*
* block_shift and block_size encode the same information
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this "
"volume to make it clean.");
return BEFS_ERR;
}
return BEFS_OK;
}
]
|
| 264/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 7184
output: 37
thoughts: 428
Thoughts: **Analyzing a Code Line for Style and Length**
Okay, so I'm looking at this line of code in `fs/befs/befs.h` and I need to do a thorough check. First things first, let's see about line length, indentation, and style guidelines. Let's dig into that specific line (line 136, it looks like):
`blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);`
I'll calculate the total width. I see one tab plus some spaces... that's 12 columns. And then the text itself is 75 characters. So 12 + 75 = 87 columns. That's a little close to the standard 80-character limit I'm used to.
Wait a second, though... I remember seeing this function defined somewhere. Let me check the original code snippet. Ah, here it is:
```c
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
```
Okay, the surrounding code makes it even more clear that that's a *very* long line. And, wait! I thought the `checkpatch` tool would flag this, but it didn't! That's odd. Let me look into that.
Hold on, I seem to remember something about newer kernel versions having a higher line length limit. I'd better check the specific `checkpatch` rules and see if they've been adjusted to something higher, like 100 columns unless it exceeds 100. That could explain why it didn't trigger a warning.
To be thorough, I'm going to consult the kernel coding style guidelines and also inspect surrounding code in both `fs/befs/befs.h` and `fs/befs/super.c`. I'll need to use `read-file` to get the context from lines 120-145 in `fs/befs/befs.h` to make sure I'm not missing anything. Gotta make sure everything is clean and consistent!
|
| 265/4 |
2026/08/26 18:27 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:115 LineCount:40]
Results: map[Contents: 115:
116: static inline struct befs_inode_info *
117: BEFS_I(const struct inode *inode)
118: {
119: return container_of(inode, struct befs_inode_info, vfs_inode);
120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
145: return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
146: }
147:
148: #include "endian.h"
149:
150: #endif /* _LINUX_BEFS_H */
]
|
| 266/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 8753
output: 35
thoughts: 999
Thoughts: **Analyzing the Befs Patch for Formatting Compliance**
Okay, first things first, I need to understand what's going on with the code I'm about to format. Let me see... `read-file` pulls the original file, pre-edits, unless `codeeditor` has been used. Right, no edits from the editor yet. But, I should check the Git working tree state to be sure. I recall `patch-diff` showing the diff between HEAD and the working directory.
Okay, now, why am I seeing line 125 as `return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +`? Is this from the index/HEAD or the file itself? The `read-file` description does say I won't see my edits via the code search; it shows the previous state, which should be the *un-edited* code, so this line seems correct. I need to be *absolutely* certain, though. Let's make sure the file on disk *currently* has this diff applied, or if this is what's in the Git diff. Ah, the `patch-diff` output indicates that the patch *is* already applied in the working tree!
Now, according to the instructions I am an expert Linux kernel developer tasked with formatting a kernel patch, and my task is purely formatting: ensure the patch complies with kernel coding style, code rules and passes `checkpatch.pl`, while preserving logic. I should only stop once formatting is done and `checkpatch.pl` is happy. I shouldn't question changes unless they are *obviously* wrong. If the code *already* conforms, then I'm done.
So, let's carefully review the changes.
The first file, `fs/befs/befs.h`, shows the changes in `iaddr2blockno` and `blockno2iaddr`:
```c
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
```
and
```c
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
```
Now, let's see how `fs/befs/super.c` looks:
```c
/*
* block_shift and block_size encode the same information
* in different ways as a consistency check.
*/
if (befs_sb->block_shift >= 32 ||
(1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if (befs_sb->ag_shift >= 32) {
befs_error(sb, "ag_shift >= 32. Corruption likely.");
return BEFS_ERR;
}
if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Okay, now let's carefully read lines 50-130 in `fs/befs/super.c` to look for consistency.
|
| 267/4 |
2026/08/26 18:27 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:50 LineCount:80]
Results: map[Contents: 50: befs_sb->root_dir = fsrun_to_cpu(sb, disk_sb->root_dir);
51: befs_sb->indices = fsrun_to_cpu(sb, disk_sb->indices);
52: befs_sb->nls = NULL;
53:
54: return BEFS_OK;
55: }
56:
57: int
58: befs_check_sb(struct super_block *sb)
59: {
60: struct befs_sb_info *befs_sb = BEFS_SB(sb);
61:
62: /* Check magic headers of super block */
63: if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
64: || (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
65: || (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
66: befs_error(sb, "invalid magic header");
67: return BEFS_ERR;
68: }
69:
70: /*
71: * Check blocksize of BEFS.
72: *
73: * Blocksize of BEFS is 1024, 2048, 4096 or 8192.
74: */
75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 268/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 11789
output: 25
thoughts: 1190
Thoughts: **Analyzing and Ensuring Code Style Compliance in `fs/befs/super.c`**
Okay, let's break this down. My task is straightforward: ensure this patch adheres to the kernel's coding style, the surrounding code's rules, and passes `checkpatch.pl`, all while *absolutely* preserving the code's logic. No functional changes are allowed.
I started by looking at the diff in `fs/befs/super.c`. Initially, it seems trivial – a double blank line was reduced to a single one. Then I went to check the comment "ag_shift also encodes the same information as blocks_per_ag in a different way, non-fatal consistency check". I noticed a potential inconsistency: the check `if (befs_sb->ag_shift >= 32)` returns `BEFS_ERR`, which is fatal, contrary to the comment's "non-fatal" claim for the `blocks_per_ag` check. However, since the prompt explicitly states I'm not to question the requested changes, and that the code's logic is sacrosanct, I'll set that aside. I'm focusing on the format.
I ran `checkpatch.pl`, and it reported "0 errors, 0 warnings, 41 lines checked," so, that's good. The patch itself doesn't introduce any obvious style violations. However, I need to be sure about *surrounding* code.
Now I am going to carefully check the indentation in `befs.h`. I noticed `iaddr.start` is split across two lines when it could be on one. Then I calculated the line lengths in columns using tabs and spaces.
The question is, why was the code originally split across multiple lines in `befs.h`? The original line was:
`iaddr.start = blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);`
The calculation is 8 + 4 + 60 = 72 columns.
In the patch, with the change in the line, I get:
`iaddr.start = blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);`
The calculation is: 8 + 4 + 75 = 87 columns.
It would seem the reason for the original multi-line expression was the 80-column limit. The change in the patch means the expression is no longer valid. The question is whether indentation is 4-spaces or a tab?
I need to confirm whether the indentation in `befs.h` for multi-line expressions uses 4 spaces or a tab. I will search across `fs/befs/` to determine the common line continuation style in this area. Only then can I be 100% sure the patch is correctly formatted.
|
| 269/4 |
2026/08/26 18:27 |
tool |
grepper |
0m
Args: map[Expression:= PathPrefix:fs/befs]
Results: map[Output:
Full output is too long, showing 500 out of 1457 lines.
Use more precise expression if possible.
fs/befs/ChangeLog=1=Version 0.92 (2002-03-29)
fs/befs/ChangeLog:2:==========
fs/befs/ChangeLog-3-* Minor cleanup. Ran Lindent on the sources.
--
fs/befs/ChangeLog=5=Version 0.92 (2002-03-27)
fs/befs/ChangeLog:6:==========
fs/befs/ChangeLog-7-* Fixed module makefile problem. It was not compiling all the correct
--
fs/befs/ChangeLog=12=Version 0.91 (2002-03-26)
fs/befs/ChangeLog:13:==========
fs/befs/ChangeLog-14-* Oy! Fixed stupid bug that would cause an unresolved symbol error.
--
fs/befs/ChangeLog=17=Version 0.9 (2002-03-14)
fs/befs/ChangeLog:18:==========
fs/befs/ChangeLog-19-* Added Sergey S. Kostyliov's patch to eliminate memcpy() overhead
--
fs/befs/ChangeLog=25=Version 0.64 (2002-02-07)
fs/befs/ChangeLog:26:==========
fs/befs/ChangeLog-27-* Did the string comparison really right this time (btree.c) [WD]
--
fs/befs/ChangeLog=44=Version 0.63 (2002-01-31)
fs/befs/ChangeLog:45:==========
fs/befs/ChangeLog-46-* Fixed bug in befs_find_brun_indirect() that would result in the wrong
--
fs/befs/ChangeLog=69=Version 0.62
fs/befs/ChangeLog:70:==========
fs/befs/ChangeLog-71-* Fixed makefile for module install [WD]
--
fs/befs/ChangeLog=74=Version 0.61 (2002-01-20)
fs/befs/ChangeLog:75:==========
fs/befs/ChangeLog-76-* Made functions in endian.h to do the correct byteswapping, no matter
--
fs/befs/ChangeLog=92=Version 0.6 (2001-12-15)
fs/befs/ChangeLog:93:==========
fs/befs/ChangeLog-94-* Cleanup of NLS functions (util.c) [WD]
--
fs/befs/ChangeLog=123=Version 0.50 (2001-11-13)
fs/befs/ChangeLog:124:==========
fs/befs/ChangeLog-125-* Added workaround for mis-understanding of the nature of the b+trees used
--
fs/befs/ChangeLog=176=Version 0.45 (2001-10-29)
fs/befs/ChangeLog:177:==========
fs/befs/ChangeLog-178-* Added functions to get the private superblock and inode structures from
--
fs/befs/ChangeLog=204=Version 0.4 (2001-10-28)
fs/befs/ChangeLog:205:==========
fs/befs/ChangeLog-206-* Made it an option to use the old non-pagecache befs_file_read() for
--
fs/befs/ChangeLog-223-2001-10-26
fs/befs/ChangeLog:224:==========
fs/befs/ChangeLog-225-* Fixed date format in this file. Was I smoking crack?
--
fs/befs/ChangeLog-247-2001-10-24
fs/befs/ChangeLog:248:==========
fs/befs/ChangeLog-249-* Fix nasty bug in converting block numbers to struct befs_inode_addr.
--
fs/befs/ChangeLog-257-2001-10-23
fs/befs/ChangeLog:258:==========
fs/befs/ChangeLog-259-* Added btree searching function.
--
fs/befs/ChangeLog-265-2001-10-22
fs/befs/ChangeLog:266:==========
fs/befs/ChangeLog-267-* Added B+tree reading functions (in btree.c).
--
fs/befs/ChangeLog-270-2001-09-11
fs/befs/ChangeLog:271:==========
fs/befs/ChangeLog-272-* Converted befs_read_file() to use the new datastream code.
--
fs/befs/ChangeLog-285-2001-09-10
fs/befs/ChangeLog:286:==========
fs/befs/ChangeLog-287-* Finished implementing read_datastream()
--
fs/befs/ChangeLog-293-2001-09-30
fs/befs/ChangeLog:294:==========
fs/befs/ChangeLog-295-* Discovered that the datastream handleing code in file.c is quite deficient
--
fs/befs/ChangeLog-305-2001-09-07
fs/befs/ChangeLog:306:==========
fs/befs/ChangeLog-307-* Made a function to actually count the number of fs blocks used by a file.
--
fs/befs/ChangeLog-311-2001-09-05
fs/befs/ChangeLog:312:==========
fs/befs/ChangeLog-313-* Fixed a misunderstanding of the inode fields.
--
fs/befs/ChangeLog-337-2001-09-01
fs/befs/ChangeLog:338:==========
fs/befs/ChangeLog-339-* Fixed the problem with statfs where it would always claim the disk was
--
fs/befs/ChangeLog-345-2001-09-01
fs/befs/ChangeLog:346:==========
fs/befs/ChangeLog-347-* Changed the macros in befs_fs.h to inline functions.
--
fs/befs/ChangeLog-358-2001-08-30
fs/befs/ChangeLog:359:==========
fs/befs/ChangeLog-360-* Cleaned up some wording.
--
fs/befs/ChangeLog-363- Check block_size agrees with block_shift
fs/befs/ChangeLog:364: Check flags == BEFS_CLEAN
fs/befs/ChangeLog-365- (fs/befs/super.c)
--
fs/befs/ChangeLog-384-2001-08-27
fs/befs/ChangeLog:385:==========
fs/befs/ChangeLog-386-* Cleaned up the fs/Config.in entries a bit, now slightly more descriptive.
--
fs/befs/ChangeLog-394-2001-08-??
fs/befs/ChangeLog:395:==========
fs/befs/ChangeLog-396-* Removed superblock locking calls in befs_read_super(). In 2.4, the VFS
--
fs/befs/ChangeLog-399-2001-08-13
fs/befs/ChangeLog:400:==========
fs/befs/ChangeLog-401-* Will Dyson <will_dyson@pobox.com> is now attempting to maintain this module
--
fs/befs/Makefile-5-
fs/befs/Makefile:6:obj-$(CONFIG_BEFS_FS) += befs.o
fs/befs/Makefile:7:ccflags-$(CONFIG_BEFS_DEBUG) += -DDEBUG
fs/befs/Makefile:8:befs-objs := datastream.o btree.o super.o inode.o debug.o io.o linuxvfs.o
--
fs/befs/befs.h=130=blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
--
fs/befs/befs.h-133-
fs/befs/befs.h:134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
fs/befs/befs.h:135: iaddr.start =
fs/befs/befs.h-136- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
fs/befs/befs.h:137: iaddr.len = 1;
fs/befs/befs.h-138-
--
fs/befs/befs_fs_types.h=48=enum super_flags {
--
fs/befs/befs_fs_types.h-50- BEFS_BYTESEX_LE,
fs/befs/befs_fs_types.h:51: BEFS_CLEAN = 0x434c454e,
fs/befs/befs_fs_types.h:52: BEFS_DIRTY = 0x44495254,
fs/befs/befs_fs_types.h:53: BEFS_SUPER_MAGIC1 = 0x42465331, /* BFS1 */
fs/befs/befs_fs_types.h:54: BEFS_SUPER_MAGIC2 = 0xdd121031,
fs/befs/befs_fs_types.h:55: BEFS_SUPER_MAGIC3 = 0x15b6830e,
fs/befs/befs_fs_types.h-56-};
--
fs/befs/befs_fs_types.h=72=enum inode_flags {
fs/befs/befs_fs_types.h:73: BEFS_INODE_IN_USE = 0x00000001,
fs/befs/befs_fs_types.h:74: BEFS_ATTR_INODE = 0x00000004,
fs/befs/befs_fs_types.h:75: BEFS_INODE_LOGGED = 0x00000008,
fs/befs/befs_fs_types.h:76: BEFS_INODE_DELETED = 0x00000010,
fs/befs/befs_fs_types.h:77: BEFS_LONG_SYMLINK = 0x00000040,
fs/befs/befs_fs_types.h:78: BEFS_PERMANENT_FLAG = 0x0000ffff,
fs/befs/befs_fs_types.h:79: BEFS_INODE_NO_CREATE = 0x00010000,
fs/befs/befs_fs_types.h:80: BEFS_INODE_WAS_WRITTEN = 0x00020000,
fs/befs/befs_fs_types.h:81: BEFS_NO_TRANSACTION = 0x00040000,
fs/befs/befs_fs_types.h-82-};
--
fs/befs/befs_fs_types.h=207=enum btree_types {
fs/befs/befs_fs_types.h:208: BTREE_STRING_TYPE = 0,
fs/befs/befs_fs_types.h:209: BTREE_INT32_TYPE = 1,
fs/befs/befs_fs_types.h:210: BTREE_UINT32_TYPE = 2,
fs/befs/befs_fs_types.h:211: BTREE_INT64_TYPE = 3,
fs/befs/befs_fs_types.h:212: BTREE_UINT64_TYPE = 4,
fs/befs/befs_fs_types.h:213: BTREE_FLOAT_TYPE = 5,
fs/befs/befs_fs_types.h:214: BTREE_DOUBLE_TYPE = 6
fs/befs/befs_fs_types.h-215-};
--
fs/befs/btree.c=81=struct befs_btree_node {
--
fs/befs/btree.c-87-/* local constants */
fs/befs/btree.c:88:static const befs_off_t BEFS_BT_INVAL = 0xffffffffffffffffULL;
fs/befs/btree.c-89-
--
fs/befs/btree.c=134=befs_bt_read_super(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/btree.c-141-
fs/befs/btree.c:142: bh = befs_read_datastream(sb, ds, 0, NULL);
fs/befs/btree.c-143-
--
fs/befs/btree.c-147- }
fs/befs/btree.c:148: od_sup = (befs_disk_btree_super *) bh->b_data;
fs/befs/btree.c-149- befs_dump_index_entry(sb, od_sup);
fs/befs/btree.c-150-
fs/befs/btree.c:151: sup->magic = fs32_to_cpu(sb, od_sup->magic);
fs/befs/btree.c:152: sup->node_size = fs32_to_cpu(sb, od_sup->node_size);
fs/befs/btree.c:153: sup->max_depth = fs32_to_cpu(sb, od_sup->max_depth);
fs/befs/btree.c:154: sup->data_type = fs32_to_cpu(sb, od_sup->data_type);
fs/befs/btree.c:155: sup->root_node_ptr = fs64_to_cpu(sb, od_sup->root_node_ptr);
fs/befs/btree.c-156-
fs/befs/btree.c-157- brelse(bh);
fs/befs/btree.c:158: if (sup->magic != BEFS_BTREE_MAGIC) {
fs/befs/btree.c-159- befs_error(sb, "Index header has bad magic.");
--
fs/befs/btree.c=191=befs_bt_read_node(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/btree.c-193-{
fs/befs/btree.c:194: uint off = 0;
fs/befs/btree.c-195-
--
fs/befs/btree.c-200-
fs/befs/btree.c:201: node->bh = befs_read_datastream(sb, ds, node_off, &off);
fs/befs/btree.c-202- if (!node->bh) {
--
fs/befs/btree.c-208- }
fs/befs/btree.c:209: node->od_node =
fs/befs/btree.c-210- (befs_btree_nodehead *) ((void *) node->bh->b_data + off);
--
fs/befs/btree.c-213-
fs/befs/btree.c:214: node->head.left = fs64_to_cpu(sb, node->od_node->left);
fs/befs/btree.c:215: node->head.right = fs64_to_cpu(sb, node->od_node->right);
fs/befs/btree.c:216: node->head.overflow = fs64_to_cpu(sb, node->od_node->overflow);
fs/befs/btree.c:217: node->head.all_key_count =
fs/befs/btree.c-218- fs16_to_cpu(sb, node->od_node->all_key_count);
fs/befs/btree.c:219: node->head.all_key_length =
fs/befs/btree.c-220- fs16_to_cpu(sb, node->od_node->all_key_length);
--
fs/befs/btree.c=245=befs_btree_find(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/btree.c-254-
fs/befs/btree.c:255: if (befs_bt_read_super(sb, ds, &bt_super) != BEFS_OK) {
fs/befs/btree.c-256- befs_error(sb,
--
fs/befs/btree.c-260-
fs/befs/btree.c:261: this_node = kmalloc_obj(struct befs_btree_node, GFP_NOFS);
fs/befs/btree.c-262- if (!this_node) {
--
fs/befs/btree.c-267-
fs/befs/btree.c:268: this_node->bh = NULL;
fs/befs/btree.c-269-
fs/befs/btree.c-270- /* read in root node */
fs/befs/btree.c:271: node_off = bt_super.root_node_ptr;
fs/befs/btree.c:272: if (befs_bt_read_node(sb, ds, this_node, node_off) != BEFS_OK) {
fs/befs/btree.c-273- befs_error(sb, "befs_btree_find() failed to read "
--
fs/befs/btree.c-278- while (!befs_leafnode(this_node)) {
fs/befs/btree.c:279: res = befs_find_key(sb, this_node, key, &node_off);
fs/befs/btree.c-280- /* if no key set, try the overflow node */
fs/befs/btree.c:281: if (res == BEFS_BT_OVERFLOW)
fs/befs/btree.c:282: node_off = this_node->head.overflow;
fs/befs/btree.c:283: if (befs_bt_read_node(sb, ds, this_node, node_off) != BEFS_OK) {
fs/befs/btree.c-284- befs_error(sb, "befs_btree_find() failed to read "
--
fs/befs/btree.c-290- /* at a leaf node now, check if it is correct */
fs/befs/btree.c:291: res = befs_find_key(sb, this_node, key, value);
fs/befs/btree.c-292-
--
fs/befs/btree.c-295-
fs/befs/btree.c:296: if (res != BEFS_BT_MATCH) {
fs/befs/btree.c-297- befs_error(sb, "<--- %s Key %s not found", __func__, key);
fs/befs/btree.c-298- befs_debug(sb, "<--- %s ERROR", __func__);
fs/befs/btree.c:299: *value = 0;
fs/befs/btree.c-300- return BEFS_BT_NOT_FOUND;
--
fs/befs/btree.c-308- error:
fs/befs/btree.c:309: *value = 0;
fs/befs/btree.c-310- befs_debug(sb, "<--- %s ERROR", __func__);
--
fs/befs/btree.c=329=befs_find_key(struct super_block *sb, struct befs_btree_node *node,
--
fs/befs/btree.c-340-
fs/befs/btree.c:341: findkey_len = strlen(findkey);
fs/befs/btree.c-342-
fs/befs/btree.c-343- /* if node can not contain key, just skip this node */
fs/befs/btree.c:344: last = node->head.all_key_count - 1;
fs/befs/btree.c:345: thiskey = befs_bt_get_key(sb, node, last, &keylen);
fs/befs/btree.c-346-
fs/befs/btree.c:347: eq = befs_compare_strings(thiskey, keylen, findkey, findkey_len);
fs/befs/btree.c-348- if (eq < 0) {
--
fs/befs/btree.c-352-
fs/befs/btree.c:353: valarray = befs_bt_valarray(node);
fs/befs/btree.c-354-
fs/befs/btree.c-355- /* simple binary search */
fs/befs/btree.c:356: first = 0;
fs/befs/btree.c:357: mid = 0;
fs/befs/btree.c:358: while (last >= first) {
fs/befs/btree.c:359: mid = (last + first) / 2;
fs/befs/btree.c-360- befs_debug(sb, "first: %d, last: %d, mid: %d", first, last,
fs/befs/btree.c-361- mid);
fs/befs/btree.c:362: thiskey = befs_bt_get_key(sb, node, mid, &keylen);
fs/befs/btree.c:363: eq = befs_compare_strings(thiskey, keylen, findkey,
fs/befs/btree.c-364- findkey_len);
fs/befs/btree.c-365-
fs/befs/btree.c:366: if (eq == 0) {
fs/befs/btree.c-367- befs_debug(sb, "<--- %s found %s at %d",
--
fs/befs/btree.c-369-
fs/befs/btree.c:370: *value = fs64_to_cpu(sb, valarray[mid]);
fs/befs/btree.c-371- return BEFS_BT_MATCH;
--
fs/befs/btree.c-373- if (eq > 0)
fs/befs/btree.c:374: last = mid - 1;
fs/befs/btree.c-375- else
fs/befs/btree.c:376: first = mid + 1;
fs/befs/btree.c-377- }
--
fs/befs/btree.c-380- if (eq < 0)
fs/befs/btree.c:381: *value = fs64_to_cpu(sb, valarray[mid + 1]);
fs/befs/btree.c-382- else
fs/befs/btree.c:383: *value = fs64_to_cpu(sb, valarray[mid]);
fs/befs/btree.c-384- befs_error(sb, "<--- %s %s not found", __func__, findkey);
--
fs/befs/btree.c=410=befs_btree_read(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/btree.c-422-
fs/befs/btree.c:423: uint key_sum = 0;
fs/befs/btree.c-424-
--
fs/befs/btree.c-426-
fs/befs/btree.c:427: if (befs_bt_read_super(sb, ds, &bt_super) != BEFS_OK) {
fs/befs/btree.c-428- befs_error(sb,
--
fs/befs/btree.c-432-
fs/befs/btree.c:433: this_node = kmalloc_obj(struct befs_btree_node, GFP_NOFS);
fs/befs/btree.c:434: if (this_node == NULL) {
fs/befs/btree.c-435- befs_error(sb, "befs_btree_read() failed to allocate %zu "
--
fs/befs/btree.c-439-
fs/befs/btree.c:440: node_off = bt_super.root_node_ptr;
fs/befs/btree.c:441: this_node->bh = NULL;
fs/befs/btree.c-442-
fs/befs/btree.c-443- /* seeks down to first leafnode, reads it into this_node */
fs/befs/btree.c:444: res = befs_btree_seekleaf(sb, ds, &bt_super, this_node, &node_off);
fs/befs/btree.c:445: if (res == BEFS_BT_EMPTY) {
fs/befs/btree.c-446- brelse(this_node->bh);
fs/befs/btree.c-447- kfree(this_node);
fs/befs/btree.c:448: *value = 0;
fs/befs/btree.c:449: *keysize = 0;
fs/befs/btree.c-450- befs_debug(sb, "<--- %s Tree is EMPTY", __func__);
fs/befs/btree.c-451- return BEFS_BT_EMPTY;
fs/befs/btree.c:452: } else if (res == BEFS_ERR) {
fs/befs/btree.c-453- goto error_alloc;
--
fs/befs/btree.c-457-
fs/befs/btree.c:458: while (key_sum + this_node->head.all_key_count <= key_no) {
fs/befs/btree.c-459-
fs/befs/btree.c-460- /* no more nodes to look in: key_no is too large */
fs/befs/btree.c:461: if (this_node->head.right == BEFS_BT_INVAL) {
fs/befs/btree.c:462: *keysize = 0;
fs/befs/btree.c:463: *value = 0;
fs/befs/btree.c-464- befs_debug(sb,
--
fs/befs/btree.c-472-
fs/befs/btree.c:473: key_sum += this_node->head.all_key_count;
fs/befs/btree.c:474: node_off = this_node->head.right;
fs/befs/btree.c-475-
fs/befs/btree.c:476: if (befs_bt_read_node(sb, ds, this_node, node_off) != BEFS_OK) {
fs/befs/btree.c-477- befs_error(sb, "%s failed to read node at %llu",
--
fs/befs/btree.c-483- /* how many keys into this_node is key_no */
fs/befs/btree.c:484: cur_key = key_no - key_sum;
fs/befs/btree.c-485-
fs/befs/btree.c-486- /* get pointers to datastructures within the node body */
fs/befs/btree.c:487: valarray = befs_bt_valarray(this_node);
fs/befs/btree.c-488-
fs/befs/btree.c:489: keystart = befs_bt_get_key(sb, this_node, cur_key, &keylen);
fs/befs/btree.c-490-
--
fs/befs/btree.c-502- strscpy(keybuf, keystart, keylen + 1);
fs/befs/btree.c:503: *value = fs64_to_cpu(sb, valarray[cur_key]);
fs/befs/btree.c:504: *keysize = keylen;
fs/befs/btree.c-505-
--
fs/befs/btree.c-519- error:
fs/befs/btree.c:520: *keysize = 0;
fs/befs/btree.c:521: *value = 0;
fs/befs/btree.c-522- befs_debug(sb, "<--- %s ERROR", __func__);
--
fs/befs/btree.c=541=befs_btree_seekleaf(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/btree.c-548-
fs/befs/btree.c:549: if (befs_bt_read_node(sb, ds, this_node, *node_off) != BEFS_OK) {
fs/befs/btree.c-550- befs_error(sb, "%s failed to read "
--
fs/befs/btree.c-555-
fs/befs/btree.c:556: if (this_node->head.all_key_count == 0 && befs_leafnode(this_node)) {
fs/befs/btree.c-557- befs_debug(sb, "<--- %s Tree is EMPTY", __func__);
--
fs/befs/btree.c-562-
fs/befs/btree.c:563: if (this_node->head.all_key_count == 0) {
fs/befs/btree.c-564- befs_debug(sb, "%s encountered "
--
fs/befs/btree.c-567- this_node->head.overflow);
fs/befs/btree.c:568: *node_off = this_node->head.overflow;
fs/befs/btree.c-569- } else {
fs/befs/btree.c:570: fs64 *valarray = befs_bt_valarray(this_node);
fs/befs/btree.c:571: *node_off = fs64_to_cpu(sb, valarray[0]);
fs/befs/btree.c-572- }
fs/befs/btree.c:573: if (befs_bt_read_node(sb, ds, this_node, *node_off) != BEFS_OK) {
fs/befs/btree.c-574- befs_error(sb, "%s failed to read "
--
fs/befs/btree.c=598=befs_leafnode(struct befs_btree_node *node)
--
fs/befs/btree.c-600- /* all interior nodes (and only interior nodes) have an overflow node */
fs/befs/btree.c:601: if (node->head.overflow == BEFS_BT_INVAL)
fs/befs/btree.c-602- return 1;
--
fs/befs/btree.c=621=befs_bt_keylen_index(struct befs_btree_node *node)
fs/befs/btree.c-622-{
fs/befs/btree.c:623: const int keylen_align = 8;
fs/befs/btree.c:624: unsigned long int off =
fs/befs/btree.c-625- (sizeof (befs_btree_nodehead) + node->head.all_key_length);
fs/befs/btree.c:626: ulong tmp = off % keylen_align;
fs/befs/btree.c-627-
fs/befs/btree.c-628- if (tmp)
fs/befs/btree.c:629: off += keylen_align - tmp;
fs/befs/btree.c-630-
--
fs/befs/btree.c=642=befs_bt_valarray(struct befs_btree_node *node)
fs/befs/btree.c-643-{
fs/befs/btree.c:644: void *keylen_index_start = (void *) befs_bt_keylen_index(node);
fs/befs/btree.c:645: size_t keylen_index_size = node->head.all_key_count * sizeof (fs16);
fs/befs/btree.c-646-
--
fs/befs/btree.c=658=befs_bt_keydata(struct befs_btree_node *node)
--
fs/befs/btree.c-670- * Returns a valid pointer into @node on success.
fs/befs/btree.c:671: * Returns NULL on failure (bad input) and sets *@keylen = 0
fs/befs/btree.c-672- */
--
fs/befs/btree.c=674=befs_bt_get_key(struct super_block *sb, struct befs_btree_node *node,
--
fs/befs/btree.c-681- if (index < 0 || index > node->head.all_key_count) {
fs/befs/btree.c:682: *keylen = 0;
fs/befs/btree.c-683- return NULL;
--
fs/befs/btree.c-685-
fs/befs/btree.c:686: keystart = befs_bt_keydata(node);
fs/befs/btree.c:687: keylen_index = befs_bt_keylen_index(node);
fs/befs/btree.c-688-
fs/befs/btree.c:689: if (index == 0)
fs/befs/btree.c:690: prev_key_end = 0;
fs/befs/btree.c-691- else
fs/befs/btree.c:692: prev_key_end = fs16_to_cpu(sb, keylen_index[index - 1]);
fs/befs/btree.c-693-
fs/befs/btree.c:694: *keylen = fs16_to_cpu(sb, keylen_index[index]) - prev_key_end;
fs/befs/btree.c-695-
--
fs/befs/btree.c=711=befs_compare_strings(const void *key1, int keylen1,
--
fs/befs/btree.c-713-{
fs/befs/btree.c:714: int len = min_t(int, keylen1, keylen2);
fs/befs/btree.c:715: int result = strncmp(key1, key2, len);
fs/befs/btree.c:716: if (result == 0)
fs/befs/btree.c:717: result = keylen1 - keylen2;
fs/befs/btree.c-718- return result;
--
fs/befs/btree.c=730=btree_compare_uint32(cont void *key1, int keylen1,
--
fs/befs/btree.c-732-{
fs/befs/btree.c:733: if (*(u_int32_t *) key1 == *(u_int32_t *) key2)
fs/befs/btree.c-734- return 0;
--
fs/befs/btree.c=741=btree_compare_int64(cont void *key1, int keylen1, const void *key2, int keylen2)
fs/befs/btree.c-742-{
fs/befs/btree.c:743: if (*(int64_t *) key1 == *(int64_t *) key2)
fs/befs/btree.c-744- return 0;
--
fs/befs/btree.c=752=btree_compare_uint64(cont void *key1, int keylen1,
--
fs/befs/btree.c-754-{
fs/befs/btree.c:755: if (*(u_int64_t *) key1 == *(u_int64_t *) key2)
fs/befs/btree.c-756- return 0;
--
fs/befs/btree.c=764=btree_compare_float(cont void *key1, int keylen1, const void *key2, int keylen2)
fs/befs/btree.c-765-{
fs/befs/btree.c:766: float result = *(float *) key1 - *(float *) key2;
fs/befs/btree.c:767: if (result == 0.0f)
fs/befs/btree.c-768- return 0;
--
fs/befs/btree.c=774=btree_compare_double(cont void *key1, int keylen1,
--
fs/befs/btree.c-776-{
fs/befs/btree.c:777: double result = *(double *) key1 - *(double *) key2;
fs/befs/btree.c:778: if (result == 0.0)
fs/befs/btree.c-779- return 0;
--
fs/befs/datastream.c-21-
fs/befs/datastream.c:22:const befs_inode_addr BAD_IADDR = { 0, 0, 0 };
fs/befs/datastream.c-23-
--
fs/befs/datastream.c=33=static int befs_find_brun_dblindirect(struct super_block *sb,
--
fs/befs/datastream.c-45- * Returns pointer to buffer_head containing data starting with offset @off,
fs/befs/datastream.c:46: * if you don't need to know offset just set @off = NULL.
fs/befs/datastream.c-47- */
--
fs/befs/datastream.c=49=befs_read_datastream(struct super_block *sb, const befs_data_stream *ds,
--
fs/befs/datastream.c-56- befs_debug(sb, "---> %s %llu", __func__, pos);
fs/befs/datastream.c:57: block = pos >> BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-58- if (off)
fs/befs/datastream.c:59: *off = pos - (block << BEFS_SB(sb)->block_shift);
fs/befs/datastream.c-60-
fs/befs/datastream.c:61: if (befs_fblock2brun(sb, ds, block, &run) != BEFS_OK) {
fs/befs/datastream.c-62- befs_error(sb, "BeFS: Error finding disk addr of block %lu",
--
fs/befs/datastream.c-66- }
fs/befs/datastream.c:67: bh = befs_bread_iaddr(sb, run);
fs/befs/datastream.c-68- if (!bh) {
--
fs/befs/datastream.c=95=befs_fblock2brun(struct super_block *sb, const befs_data_stream *data,
--
fs/befs/datastream.c-98- int err;
fs/befs/datastream.c:99: befs_off_t pos = fblock << BEFS_SB(sb)->block_shift;
fs/befs/datastream.c-100-
fs/befs/datastream.c-101- if (pos < data->max_direct_range) {
fs/befs/datastream.c:102: err = befs_find_brun_direct(sb, data, fblock, run);
fs/befs/datastream.c-103-
]
|
| 270/4 |
2026/08/26 18:27 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 24163
output: 9
thoughts: 926
Thoughts: **Analyzing `fs/befs/befs.h` Code Style and Functionality**
Okay, let's dive back into `fs/befs/befs.h`, specifically these two inline functions: `iaddr2blockno` and `blockno2iaddr`. My initial focus is on the formatting of the code, especially concerning the alignment and indentation.
The first function, `iaddr2blockno`, seems straightforward, calculating the block number from an inode address. But it's the second function, `blockno2iaddr`, that's piquing my interest. I'm noticing a slight inconsistency in the indentation style around the assignment to `iaddr.start`. It was originally on two lines, and I'm wondering about the rationale for its current single-line presentation. Is it just preference, or is there a subtle impact on readability?
My immediate thought is, why wasn't the single-line style used originally? And is there a good reason to keep the current style instead of a more concise one?
I've already run `checkpatch` to make sure there are no blatant style violations. The output says everything's clean. No errors or warnings, which is a good sign. However, I want to double-check that this is correct, and I'll keep the Linux kernel coding style in mind. So, I will have to ensure that spacing around operators, cast styles, and literal formatting are consistent with the kernel's conventions. Logical blocks need blank lines, and string literals must not be split across lines. I'll need to remember all of that. I will also be on the lookout for other potential issues with indentation and alignment, considering things like tabs for indentation and spaces for alignment. I'm going to run `checkpatch` again, just to be sure.
|
| 271/4 |
2026/08/26 18:28 |
tool |
checkpatch |
0m
Results: map[Output:total: 0 errors, 0 warnings, 41 lines checked
Your patch has no obvious style problems and is ready for submission.
]
|
| 272/4 |
2026/08/26 18:28 |
llm |
patch-formatter |
0m
Model:
Tokens:
input: 25523
output: 82
thoughts: 159
Thoughts: **My Assessment: Formatting Task Complete**
Alright, let's see, the instructions are pretty straightforward. The goal is pure formatting; ensure kernel style compliance, adherence to surrounding code rules, and a clean checkpatch.pl run, without altering the logic. Okay, I get it.
Now, let's take a look at the code. Hmm, after a close inspection, it seems the code already conforms perfectly. It's properly formatted according to kernel style, aligns flawlessly with the surrounding code's conventions, and, crucially, checkpatch.pl is reporting a clean bill of health – zero errors, zero warnings. Excellent.
Given this, there's nothing left for me to do. The task is effectively complete. Time to report my findings.
|
| 273/3 |
2026/08/26 18:28 |
action |
test-patch-inplace |
0m
Results: map[PatchDiff:diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
TestError:]
|
| 274/3 |
2026/08/26 18:28 |
action |
run-checkpatch |
0m
Results: map[CheckpatchOutput:total: 0 errors, 0 warnings, 41 lines checked
Your patch has no obvious style problems and is ready for submission.
NeedRefinement:false]
|
| 275/1 |
2026/08/26 18:28 |
agent |
fixes-finder |
1m
Model:
Results: map[FixesHash:1da177e4c3f41524e886b7f1b8a0c1fc7321cac2]
Instruction:
You are an experienced Linux kernel developer tasked with identifying the commit
that introduced the bug being fixed. Identifying the correct buggy commit is crucial
for proper kernel maintenance (backporting to stable trees, etc.).
Your investigation strategy:
1. Examine the patch that fixes the bug. Use git tools (like git-log or git-blame)
to trace the history of the lines or functions modified by the patch.
2. Analyze the stack trace in the crash report. Identify the key files and functions
involved in the crash and investigate their history to see when the problematic
logic was introduced.
3. Compare the bug explanation with the commit history to find the point where
the described logic error first appeared.
A bug is typically introduced when a piece of code is first written, or when
a refactoring changed its logic in a way that introduced the bug.
Trace the history of relevant symbols or find when specific code patterns were introduced/removed.
You must provide exactly one bug-introducing commit hash.
If you are unable to confidently determine the bug-introducing commit after investigation,
return an empty string rather than guessing.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The crash is:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The explanation of the root cause is:
An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
The patch that fixes the bug is:
diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
Search for the commit(s) that introduced this bug.
|
| 276/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 7340
output: 35
thoughts: 263
Thoughts: **Analyzing a BEFS Shift-Out-of-Bounds Error**
Okay, let's break this down. We've got a crash report, a classic UBSAN shift-out-of-bounds error in `fs/befs/super.c`. The error specifically points to line 96, where it's complaining about the shift exponent, 2066842816, being too large for a 32-bit integer. That's a pretty clear indicator of the issue – we're trying to left-shift 1 by a value that's definitely going to overflow. This is happening within `befs_check_sb`, which makes this the likely root cause.
The provided patch modifies `fs/befs/befs.h` and `fs/befs/super.c`. The key change is right there in `befs_check_sb`: they've added a check for `befs_sb->block_shift >= 32` *before* the attempted left-shift. The original code was blindly performing the bitwise operation without any boundary checking. The new code is correctly guarding against this overflow, which is spot on.
So, the fix is to explicitly check the `block_shift` value before performing the shift, ensuring that it's within the valid range for a 32-bit integer. This looks like a solid patch.
Now, to get the bigger picture, I want to understand *why* this shift value could have become so large. I should dive into the history of these files. A quick `git blame` or `git log` on `fs/befs/super.c` and `fs/befs/befs.h` will tell me when this code was introduced, and potentially give me clues about the circumstances that led to the problem. It could be an edge case that wasn't considered during development, or maybe a change in the filesystem's behavior over time. Understanding the history will help me see this bug in context.
|
| 277/2 |
2026/08/26 18:28 |
tool |
git-blame |
0m
Args: map[End:110 File:fs/befs/super.c Start:85]
Results: map[Output:103c0fb3400b3 85) befs_error(sb, "blocksize(%u) cannot be larger "
^1da177e4c3f4 86) "than system pagesize(%lu)", befs_sb->block_size,
^1da177e4c3f4 87) PAGE_SIZE);
^1da177e4c3f4 88) return BEFS_ERR;
^1da177e4c3f4 89) }
^1da177e4c3f4 90)
^1da177e4c3f4 91) /*
11674239f927c 92) * block_shift and block_size encode the same information
11674239f927c 93) * in different ways as a consistency check.
^1da177e4c3f4 94) */
^1da177e4c3f4 95)
^1da177e4c3f4 96) if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
^1da177e4c3f4 97) befs_error(sb, "block_shift disagrees with block_size. "
^1da177e4c3f4 98) "Corruption likely.");
^1da177e4c3f4 99) return BEFS_ERR;
^1da177e4c3f4 100) }
^1da177e4c3f4 101)
bbe1bd0b6bba1 102)
bbe1bd0b6bba1 103) /* ag_shift also encodes the same information as blocks_per_ag in a
bbe1bd0b6bba1 104) * different way, non-fatal consistency check
bbe1bd0b6bba1 105) */
bbe1bd0b6bba1 106) if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
bbe1bd0b6bba1 107) befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
bbe1bd0b6bba1 108)
103c0fb3400b3 109) if (befs_sb->log_start != befs_sb->log_end ||
103c0fb3400b3 110) befs_sb->flags == BEFS_DIRTY) {
]
|
| 278/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 8794
output: 24
thoughts: 104
Thoughts: **Investigating the Code's History**
Okay, so I need to understand the lineage of this section of code. My first instinct is to trace it back through the commit history. I'll start by checking which commits directly touched these specific lines. But, I need to be thorough; I'll need to see if it goes all the way back to that initial commit, `^1da177e4c3f4`, or perhaps an earlier one. No, hold on. Before I dive too deep into the full history, let's look into specific commits first – `bbe1bd0b6bba1`, `103c0fb3400b3`, and `11674239f927c`, etc. – to see what changes were made around the time this area was modified, and finally I will run `git log` on `befs_check_sb`, to see its detailed history. That should give me a good understanding of its evolution.
|
| 279/2 |
2026/08/26 18:28 |
tool |
git-show |
0m
Args: map[Commit:bbe1bd0b6bba1]
Results: map[Output:commit bbe1bd0b6bba138eaf441c6c964bde9866da8808
Author: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Tue Aug 9 22:23:36 2016 +0100
befs: add check for ag_shift in superblock
ag_shift and blocks_per_ag contain the same information in different ways,
same as block_shift and block_size do. It is worth checking this two are
consistent, but since blocks_per_ag isn't documented as mandatory to use
some implementations of befs don't enforce this, so making it non-fatal if
they don't match and just having it as a warning.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
diff --git a/fs/befs/super.c b/fs/befs/super.c
index dc13df8de3e8..c36745d2b45f 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -103,6 +103,13 @@ befs_check_sb(struct super_block *sb)
return BEFS_ERR;
}
+
+ /* ag_shift also encodes the same information as blocks_per_ag in a
+ * different way, non-fatal consistency check
+ */
+ if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
+
if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
]
|
| 280/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 9684
output: 30
thoughts: 241
Thoughts: **Debugging a Shift-Out-of-Bounds Error in the BEFS Filesystem**
Okay, hold on a second! This crash report is screaming "shift-out-of-bounds" at me. It looks like it's happening specifically in the BEFS filesystem code, and the error points to line 96 in `fs/befs/super.c`. That line is the one checking if `(1 << befs_sb->block_shift)` is equal to `befs_sb->block_size`. The error message is clear: the `block_shift` value is causing an integer overflow during the left shift operation. The exponent, 2066842816, is way too big for a 32-bit `int`.
My immediate thought is to trace the history of this code. I need to understand how `befs_check_sb` evolved and, specifically, when that problematic check was introduced. I'm going to jump into the `git log` to see if I can pinpoint the commit that added or modified the line containing the shift operation. Was it `1da177e4c3f4`? It looks promising but I need to make sure. Let's see what the commit history for `fs/befs/super.c` reveals about how `block_shift` has been handled over time. I need to understand what this `block_shift` represents in the BEFS superblock and why it's getting such an enormous value in this specific scenario. From there, I can start to formulate a fix, perhaps a boundary check or an alternative calculation method that avoids the overflow.
|
| 281/2 |
2026/08/26 18:28 |
tool |
git-log |
0m
Args: map[CodeRegexp:block_shift PathPrefix:fs/befs]
Results: map[Output:11674239f927 befs: fix comment style
f30661035b01 fs: befs: remove unnecessary *befs_sb variable
d84e4a5a09c3 fs: befs: Remove redundant validation from befs_find_brun_direct
a9721f3152bc [PATCH] befs: endianness annotations
1da177e4c3f4 Linux-2.6.12-rc2
]
|
| 282/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 10437
output: 36
thoughts: 28
Thoughts: Okay, here's my attempt at summarizing those thoughts from a first-person, expert perspective, addressing a fellow expert:
**Investigating `befs_check_sb` in `fs/befs/super.c`**
Alright, let's dive in. I need to get a clear picture of what's going on with that `befs_check_sb` function. My first instinct, as always, is to check the commit history. Specifically, I'm heading straight for the `git log` output for `fs/befs/super.c`. That file is where the superblock handling logic resides within the BeFS filesystem code, and `befs_check_sb` is, I presume, responsible for the integrity check of the superblock data. I'm hoping to get a quick overview of when it was introduced, how it's been modified over time, and if there have been any recent bug fixes or performance improvements related to it. Seeing the context of those changes will give me a good head start on understanding the current state of that particular check. It's the best way to understand its purpose and behavior. Hopefully, the log entries will provide some valuable clues regarding potential issues, past decisions, or any areas that might warrant further investigation. I'm expecting to find at least the initial commit and any significant modifications that might shed light on its intended functionality and any known limitations. Let's see what the log reveals.
|
| 283/2 |
2026/08/26 18:28 |
tool |
git-log |
0m
Error:
Args: map[PathPrefix:fs/befs/super.c SymbolName:befs_check_sb]
Results:
|
| 284/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 10825
output: 36
thoughts: 13
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the Situation: Invoking `git-log`**
Okay, so I'm looking at a task where I need to pull some information out of a Git repository. My immediate instinct is to leverage `git-log`. That's the go-to tool for diving into the commit history. It's robust, flexible, and I know its ins and outs pretty well. The key here is, I need to focus its output using `SourcePath`. This implies I'm looking for history related to a specific file or directory within the project, which is a fairly common scenario. I'm making a mental note about the potential need to adjust formatting options on the command, or add extra flags to filter results.
|
| 285/2 |
2026/08/26 18:28 |
tool |
git-log |
0m
Args: map[SourcePath:fs/befs/super.c SymbolName:befs_check_sb]
Results: map[Output:103c0fb3400b befs: fix style issues in super.c
11674239f927 befs: fix comment style
bbe1bd0b6bba befs: add check for ag_shift in superblock
6ea4558f9b37 befs: add flags field to validate superblock state
038428fcf7f0 befs: replace typedef befs_sb_info by structure
1da177e4c3f4 Linux-2.6.12-rc2
]
|
| 286/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 11186
output: 35
thoughts: 139
Thoughts: **Initial Investigation of Befs Filesystem in Git**
Okay, so I'm diving into this Befs filesystem code and need to get a handle on its history and specific block size validation. First, I'm going to pull up the initial commit, `1da177e4c3f41da54e0c4343f3294408337dc46`, to understand the baseline. That should give me the first context of the code.
Then, I'll quickly check the commit hash for the `if ((1 << befs_sb->block_shift) != befs_sb->block_size)` condition within the filesystem. Let's see if this hash, `1da177e4c3f4`, includes it. This is key, as it is a crucial sanity check for block size calculations.
Finally, I'll need to examine `super.c` in particular, I think. I will try `git show`, `read-file`, or `git log` on that specific path and commit, which is `1da177e4c3f4:fs/befs/super.c`. This will give me a more localized view and allow me to see the evolution of that specific file. This should give me the most context.
|
| 287/2 |
2026/08/26 18:28 |
tool |
git-show |
0m
Args: map[Commit:1da177e4c3f4:fs/befs/super.c]
Results: map[Output:/*
* super.c
*
* Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
*
* Licensed under the GNU GPL. See the file COPYING for details.
*
*/
#include <linux/fs.h>
#include "befs.h"
#include "super.h"
#include "endian.h"
/**
* load_befs_sb -- Read from disk and properly byteswap all the fields
* of the befs superblock
*
*
*
*
*/
int
befs_load_sb(struct super_block *sb, befs_super_block * disk_sb)
{
befs_sb_info *befs_sb = BEFS_SB(sb);
/* Check the byte order of the filesystem */
if (le32_to_cpu(disk_sb->fs_byte_order) == BEFS_BYTEORDER_NATIVE)
befs_sb->byte_order = BEFS_BYTESEX_LE;
else if (be32_to_cpu(disk_sb->fs_byte_order) == BEFS_BYTEORDER_NATIVE)
befs_sb->byte_order = BEFS_BYTESEX_BE;
befs_sb->magic1 = fs32_to_cpu(sb, disk_sb->magic1);
befs_sb->magic2 = fs32_to_cpu(sb, disk_sb->magic2);
befs_sb->magic3 = fs32_to_cpu(sb, disk_sb->magic3);
befs_sb->block_size = fs32_to_cpu(sb, disk_sb->block_size);
befs_sb->block_shift = fs32_to_cpu(sb, disk_sb->block_shift);
befs_sb->num_blocks = fs64_to_cpu(sb, disk_sb->num_blocks);
befs_sb->used_blocks = fs64_to_cpu(sb, disk_sb->used_blocks);
befs_sb->inode_size = fs32_to_cpu(sb, disk_sb->inode_size);
befs_sb->blocks_per_ag = fs32_to_cpu(sb, disk_sb->blocks_per_ag);
befs_sb->ag_shift = fs32_to_cpu(sb, disk_sb->ag_shift);
befs_sb->num_ags = fs32_to_cpu(sb, disk_sb->num_ags);
befs_sb->log_blocks = fsrun_to_cpu(sb, disk_sb->log_blocks);
befs_sb->log_start = fs64_to_cpu(sb, disk_sb->log_start);
befs_sb->log_end = fs64_to_cpu(sb, disk_sb->log_end);
befs_sb->root_dir = fsrun_to_cpu(sb, disk_sb->root_dir);
befs_sb->indices = fsrun_to_cpu(sb, disk_sb->indices);
befs_sb->nls = NULL;
return BEFS_OK;
}
int
befs_check_sb(struct super_block *sb)
{
befs_sb_info *befs_sb = BEFS_SB(sb);
/* Check magic headers of super block */
if ((befs_sb->magic1 != BEFS_SUPER_MAGIC1)
|| (befs_sb->magic2 != BEFS_SUPER_MAGIC2)
|| (befs_sb->magic3 != BEFS_SUPER_MAGIC3)) {
befs_error(sb, "invalid magic header");
return BEFS_ERR;
}
/*
* Check blocksize of BEFS.
*
* Blocksize of BEFS is 1024, 2048, 4096 or 8192.
*/
if ((befs_sb->block_size != 1024)
&& (befs_sb->block_size != 2048)
&& (befs_sb->block_size != 4096)
&& (befs_sb->block_size != 8192)) {
befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
return BEFS_ERR;
}
if (befs_sb->block_size > PAGE_SIZE) {
befs_error(sb, "blocksize(%u) cannot be larger"
"than system pagesize(%lu)", befs_sb->block_size,
PAGE_SIZE);
return BEFS_ERR;
}
/*
* block_shift and block_size encode the same information
* in different ways as a consistency check.
*/
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
if (befs_sb->log_start != befs_sb->log_end) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
"to make it clean.");
return BEFS_ERR;
}
return BEFS_OK;
}
]
|
| 288/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 13007
output: 36
thoughts: 32
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Checking BEFS Headers in the Kernel's History**
Alright, so we're looking at some BEFS-related code. My first instinct, given the context (whatever it might be, which I'm inferring is related to a file system), is to immediately dive into the core header file. I know that `befs.h` is likely a crucial point of definition and declaration within the BEFS filesystem implementation. Specifically, I need to check the state of the relevant header within the `1da177e4c3f4` commit. Going back in history is often the only way to track down a certain code-breaking change and determine where it went wrong. Accessing the header directly provides a solid foundation for understanding the data structures, function prototypes, and any key macros or constants that would be relevant to whatever problem I'm trying to solve, or change I'm trying to make. I'm going to look for any clues there first. That commit has been around for a while, so it would seem like a good place to start.
|
| 289/2 |
2026/08/26 18:28 |
tool |
git-show |
0m
Args: map[Commit:1da177e4c3f4:fs/befs/befs.h]
Results: map[Output:/*
* befs.h
*
* Copyright (C) 2001-2002 Will Dyson <will_dyson@pobox.com>
* Copyright (C) 1999 Makoto Kato (m_kato@ga2.so-net.ne.jp)
*/
#ifndef _LINUX_BEFS_H
#define _LINUX_BEFS_H
#include "befs_fs_types.h"
/* used in debug.c */
#define BEFS_VERSION "0.9.3"
typedef u64 befs_blocknr_t;
/*
* BeFS in memory structures
*/
typedef struct befs_mount_options {
gid_t gid;
uid_t uid;
int use_gid;
int use_uid;
int debug;
char *iocharset;
} befs_mount_options;
typedef struct befs_sb_info {
u32 magic1;
u32 block_size;
u32 block_shift;
int byte_order;
befs_off_t num_blocks;
befs_off_t used_blocks;
u32 inode_size;
u32 magic2;
/* Allocation group information */
u32 blocks_per_ag;
u32 ag_shift;
u32 num_ags;
/* jornal log entry */
befs_block_run log_blocks;
befs_off_t log_start;
befs_off_t log_end;
befs_inode_addr root_dir;
befs_inode_addr indices;
u32 magic3;
befs_mount_options mount_opts;
struct nls_table *nls;
} befs_sb_info;
typedef struct befs_inode_info {
u32 i_flags;
u32 i_type;
befs_inode_addr i_inode_num;
befs_inode_addr i_parent;
befs_inode_addr i_attribute;
union {
befs_data_stream ds;
char symlink[BEFS_SYMLINK_LEN];
} i_data;
struct inode vfs_inode;
} befs_inode_info;
enum befs_err {
BEFS_OK,
BEFS_ERR,
BEFS_BAD_INODE,
BEFS_BT_END,
BEFS_BT_EMPTY,
BEFS_BT_MATCH,
BEFS_BT_PARMATCH,
BEFS_BT_NOT_FOUND
};
/****************************/
/* debug.c */
void befs_error(const struct super_block *sb, const char *fmt, ...);
void befs_warning(const struct super_block *sb, const char *fmt, ...);
void befs_debug(const struct super_block *sb, const char *fmt, ...);
void befs_dump_super_block(const struct super_block *sb, befs_super_block *);
void befs_dump_inode(const struct super_block *sb, befs_inode *);
void befs_dump_index_entry(const struct super_block *sb, befs_btree_super *);
void befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead *);
/****************************/
/* Gets a pointer to the private portion of the super_block
* structure from the public part
*/
static inline befs_sb_info *
BEFS_SB(const struct super_block *super)
{
return (befs_sb_info *) super->s_fs_info;
}
static inline befs_inode_info *
BEFS_I(const struct inode *inode)
{
return list_entry(inode, struct befs_inode_info, vfs_inode);
}
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, befs_inode_addr * iaddr)
{
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
static inline befs_inode_addr
blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
{
befs_inode_addr iaddr;
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
}
static inline unsigned int
befs_iaddrs_per_block(struct super_block *sb)
{
return BEFS_SB(sb)->block_size / sizeof (befs_inode_addr);
}
static inline int
befs_iaddr_is_empty(befs_inode_addr * iaddr)
{
return (!iaddr->allocation_group) && (!iaddr->start) && (!iaddr->len);
}
static inline size_t
befs_brun_size(struct super_block *sb, befs_block_run run)
{
return BEFS_SB(sb)->block_size * run.len;
}
#endif /* _LINUX_BEFS_H */
]
|
| 290/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 14625
output: 51
thoughts: 950
Thoughts: **Initial Analysis of Potential BEFS Filesystem Corruption**
Okay, so I'm looking into this BEFS filesystem issue, and it seems like the initial commit, `1da177e4c3f41da54e0c4343f3294408337dc46` (Linux 2.6.12-rc2, as I suspected), is where we need to start. My immediate thought is to check the initial implementation of `befs_check_sb`, `block_shift`, and `ag_shift`. Looking at that initial commit, I see this critical check within `befs_check_sb`:
```c
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
```
That's the core of it, making sure the block shift aligns with the block size, which is obviously important for any filesystem. I'm also noting the `iaddr2blockno` and `blockno2iaddr` functions, since they will use the `ag_shift` and `block_shift` to calculate the block addresses.
Then, there's another commit, `bbe1bd0b6bba138eaf441c6c964bde9866da8808`, where Luis de Bethencourt added an additional consistency check for `ag_shift` vs. `blocks_per_ag`. I'm starting to build a picture of how these parameters interact.
The bug report mentions a UBSAN shift-out-of-bounds error, specifically on the line with the `block_shift` check. The crash line is at:
```c
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
```
The error details that the shift exponent `2066842816` is too large for an `int`. Since I know that the initial commit has that code in it, I can confirm that that same block size check is present in `1da177e4c3f41da54e0c4343f3294408337dc46`, Linux 2.6.12-rc2.
I need to quickly confirm the commit hash to make sure that it is, in fact, the initial commit. Looks like I have to run `git show` to confirm the commit hash is `1da177e4c3f41da54e0c4343f3294408337dc46`.
|
| 291/2 |
2026/08/26 18:28 |
tool |
git-show |
0m
Error:
Args: map[Commit:1da177e4c3f41da54e0c4343f3294408337dc46]
Results:
|
| 292/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 16309
output: 36
thoughts: 67
Thoughts: Here's a summary of my immediate thought process:
**Debugging a Git Commit Failure**
Okay, hold on a second. That specific commit, `1da177e4c3f41da54e0c4343f3294408337dc46`, failed? Strange. I need to figure out why. Since I'm working with a Git repository, the first thing I'll do is hone in on the parent commit's first few characters, `1da177e4c3f4`, and then I'll use `git log` to investigate further. It is best to review the commit history related to this commit to get to the bottom of this issue. Perhaps there's an issue there that can shed some light on the error.
|
| 293/2 |
2026/08/26 18:28 |
tool |
git-log |
0m
Args: map[Count:1 PathPrefix:fs/befs/super.c Since:30 years]
Results: map[Output:103c0fb3400b befs: fix style issues in super.c
]
|
| 294/2 |
2026/08/26 18:28 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 16622
output: 26
thoughts: 45
Thoughts: Okay, let's dive into this.
**Investigating the Commit `1da177e4c3f4`**
Right, so I need to get the full hash for `1da177e4c3f4`. I'm going to assume this is a partial commit hash within a Git repository. To get the comprehensive details, I'll leverage `git show` with `1da177e4c3f4`. This should provide me with all the associated metadata, the commit message, the changes introduced – basically, everything I need to understand what this specific commit did. That's the most efficient way to get a full picture from a partial identifier.
|
| 295/2 |
2026/08/26 18:28 |
tool |
git-show |
0m
Args:
Results: map[Output:
Full output is too long, showing 1000 out of 6822520 lines.
[commit 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2
Author: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat Apr 16 15:20:36 2005 -0700
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/COPYING b/COPYING
new file mode 100644
index 000000000000..2a7e338ec2fc
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,356 @@
+
+ NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+ Linus Torvalds
+
+----------------------------------------
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/CREDITS b/CREDITS
new file mode 100644
index 000000000000..671e9c2d31fe
--- /dev/null
+++ b/CREDITS
@@ -0,0 +1,3743 @@
+ This is at least a partial credits-file of people that have
+ contributed to the Linux project. It is sorted by name and
+ formatted to allow easy grepping and beautification by
+ scripts. The fields are: name (N), email (E), web-address
+ (W), PGP key ID and fingerprint (P), description (D), and
+ snail-mail address (S).
+ Thanks,
+
+ Linus
+----------
+
+N: Matti Aarnio
+E: mea@nic.funet.fi
+D: Alpha systems hacking, IPv6 and other network related stuff
+D: One of assisting postmasters for vger.kernel.org's lists
+S: (ask for current address)
+S: Finland
+
+N: Dragos Acostachioaie
+E: dragos@iname.com
+W: http://www.arbornet.org/~dragos
+D: /proc/sysvipc
+S: C. Negri 6, bl. D3
+S: Iasi 6600
+S: Romania
+
+N: Monalisa Agrawal
+E: magrawal@nortelnetworks.com
+D: Basic Interphase 5575 driver with UBR and ABR support.
+S: 75 Donald St, Apt 42
+S: Weymouth, MA 02188
+
+N: Dave Airlie
+E: airlied@linux.ie
+W: http://www.csn.ul.ie/~airlied
+D: NFS over TCP patches
+D: in-kernel DRM Maintainer
+S: Longford, Ireland
+S: Sydney, Australia
+
+N: Tigran A. Aivazian
+E: tigran@veritas.com
+W: http://www.moses.uklinux.net/patches
+D: BFS filesystem
+D: Intel IA32 CPU microcode update support
+D: Various kernel patches
+S: United Kingdom
+
+N: Werner Almesberger
+E: werner@almesberger.net
+W: http://www.almesberger.net/
+D: dosfs, LILO, some fd features, ATM, various other hacks here and there
+S: Buenos Aires
+S: Argentina
+
+N: Tim Alpaerts
+E: tim_alpaerts@toyota-motor-europe.com
+D: 802.2 class II logical link control layer,
+D: the humble start of an opening towards the IBM SNA protocols
+S: Klaproosstraat 72 c 10
+S: B-2610 Wilrijk-Antwerpen
+S: Belgium
+
+N: Anton Altaparmakov
+E: aia21@cantab.net
+W: http://www-stu.christs.cam.ac.uk/~aia21/
+D: Author of new NTFS driver, various other kernel hacks.
+S: Christ's College
+S: Cambridge CB2 3BU
+S: United Kingdom
+
+N: C. Scott Ananian
+E: cananian@alumni.princeton.edu
+W: http://www.pdos.lcs.mit.edu/~cananian
+P: 1024/85AD9EED AD C0 49 08 91 67 DF D7 FA 04 1A EE 09 E8 44 B0
+D: Unix98 pty support.
+D: APM update to 1.2 spec.
+D: /devfs hacking.
+S: 7 Kiwi Loop
+S: Howell, NJ 07731
+S: USA
+
+N: Erik Andersen
+E: andersen@codepoet.org
+W: http://www.codepoet.org/
+P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301 0C82 5F9B 643E 30D3 9057
+D: Maintainer of ide-cd and Uniform CD-ROM driver,
+D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
+S: 352 North 525 East
+S: Springville, Utah 84663
+S: USA
+
+N: Michael Ang
+E: mang@subcarrier.org
+W: http://www.subcarrier.org/mang
+D: Linux/PA-RISC hacker
+S: 85 Frank St.
+S: Ottawa, Ontario
+S: Canada K2P 0X3
+
+N: H. Peter Anvin
+E: hpa@zytor.com
+W: http://www.zytor.com/~hpa/
+P: 2047/2A960705 BA 03 D3 2C 14 A8 A8 BD 1E DF FE 69 EE 35 BD 74
+D: Author of the SYSLINUX boot loader, maintainer of the linux.* news
+D: hierarchy and the Linux Device List; various kernel hacks
+S: 4390 Albany Drive #46
+S: San Jose, California 95129
+S: USA
+
+N: Andrea Arcangeli
+E: andrea@suse.de
+W: http://www.kernel.org/pub/linux/kernel/people/andrea/
+P: 1024D/68B9CB43 13D9 8355 295F 4823 7C49 C012 DFA1 686E 68B9 CB43
+P: 1024R/CB4660B9 CC A0 71 81 F4 A0 63 AC C0 4B 81 1D 8C 15 C8 E5
+D: Parport hacker
+D: Implemented a workaround for some interrupt buggy printers
+D: Author of pscan that helps to fix lp/parport bugs
+D: Author of lil (Linux Interrupt Latency benchmark)
+D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message)
+D: VM hacker
+D: Various other kernel hacks
+S: Via Cicalini 26
+S: Imola 40026
+S: Italy
+
+N: Derek Atkins
+E: warlord@MIT.EDU
+D: Linux-AFS Port, random kernel hacker,
+D: VFS fixes (new notify_change in particular)
+D: Moving all VFS access checks into the file systems
+S: MIT Room E15-341
+S: 20 Ames Street
+S: Cambridge, Massachusetts 02139
+S: USA
+
+N: Michel Aubry
+E: giovanni <giovanni@sudfr.com>
+D: Aladdin 1533/1543(C) chipset IDE
+D: VIA MVP-3/TX Pro III chipset IDE
+
+N: Jens Axboe
+E: axboe@suse.de
+D: Linux CD-ROM maintainer, DVD support
+D: elevator + block layer rewrites
+D: highmem I/O support
+D: misc hacking on IDE, SCSI, block drivers, etc
+S: Peter Bangs Vej 258, 2TH
+S: 2500 Valby
+S: Denmark
+
+N: John Aycock
+E: aycock@cpsc.ucalgary.ca
+D: Adaptec 274x driver
+S: Department of Computer Science
+S: University of Calgary
+S: Calgary, Alberta
+S: Canada
+
+N: Miles Bader
+E: miles@gnu.org
+D: v850 port (uClinux)
+S: NEC Corporation
+S: 1753 Shimonumabe, Nakahara-ku
+S: Kawasaki 211-8666
+S: Japan
+
+N: Ralf Baechle
+E: ralf@gnu.org
+P: 1024/AF7B30C1 CF 97 C2 CC 6D AE A7 FE C8 BA 9C FC 88 DE 32 C3
+D: Linux/MIPS port
+D: Linux/68k hacker
+S: Hauptstrasse 19
+S: 79837 St. Blasien
+S: Germany
+
+N: Krishna Balasubramanian
+E: balasub@cis.ohio-state.edu
+D: Wrote SYS V IPC (part of standard kernel since 0.99.10)
+
+N: Dario Ballabio
+E: ballabio_dario@emc.com
+E: dario.ballabio@tiscalinet.it
+E: dario.ballabio@inwind.it
+D: Author and maintainer of the Ultrastor 14F/34F SCSI driver
+D: Author and maintainer of the EATA ISA/EISA/PCI SCSI driver
+S: EMC Corporation
+S: Milano
+S: Italy
+
+N: Paul Bame
+E: bame@debian.org
+E: bame@puffin.external.hp.com
+E: paul_bame@hp.com
+W: http://www.parisc-linux.org
+D: PA-RISC 32 and 64-bit early boot, firmware interface, interrupts, misc
+S: MS42
+S: Hewlett-Packard
+S: 3404 E Harmony Rd
+S: Fort Collins, CO 80525
+
+N: Arindam Banerji
+E: axb@cse.nd.edu
+D: Contributed ESDI driver routines needed to port LINUX to the PS/2 MCA.
+S: Department of Computer Science & Eng.
+S: University of Notre Dame
+S: Notre Dame, Indiana
+S: USA
+
+N: Greg Banks
+E: gnb@alphalink.com.au
+D: IDT77105 ATM network driver
+D: some SuperH port work
+D: some trivial futzing with kconfig
+
+N: James Banks
+E: james@sovereign.org
+D: TLAN network driver
+D: Logitech Busmouse driver
+
+N: Krzysztof G. Baranowski
+E: kgb@manjak.knm.org.pl
+P: 1024/FA6F16D1 96 D1 1A CF 5F CA 69 EC F9 4F 36 1F 6D 60 7B DA
+D: Maintainer of the System V file system.
+D: System V fs update for 2.1.x dcache.
+D: Forward ported a couple of SCSI drivers.
+D: Various bugfixes.
+S: ul. Koscielna 12a
+S: 62-300 Wrzesnia
+S: Poland
+
+N: Fred Barnes
+E: frmb2@ukc.ac.uk
+D: Various parport/ppdev hacks and fixes
+S: Computing Lab, The University
+S: Canterbury, KENT
+S: CT2 7NF
+S: England
+
+N: Paul Barton-Davis
+E: pbd@op.net
+D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
+D: Various bugfixes and changes to sound drivers
+S: USA
+
+N: Carlos Henrique Bauer
+E: chbauer@acm.org
+E: bauer@atlas.unisinos.br
+D: Some new sysctl entries for the parport driver.
+D: New sysctl function for handling unsigned longs
+S: Universidade do Vale do Rio dos Sinos - UNISINOS
+S: DSI/IDASI
+S: Av. Unisinos, 950
+S: 93022000 Sao Leopoldo RS
+S: Brazil
+
+N: Peter Bauer
+E: 100136.3530@compuserve.com
+D: Driver for depca-ethernet-board
+S: 69259 Wilhemsfeld
+S: Rainweg 15
+S: Germany
+
+N: Fred Baumgarten
+E: dc6iq@insl1.etec.uni-karlsruhe.de
+E: dc6iq@adacom.org
+E: dc6iq@db0ais.#hes.deu.eu (packet radio)
+D: NET-2 & netstat(8)
+S: Soevener Strasse 11
+S: 53773 Hennef
+S: Germany
+
+N: Donald Becker
+E: becker@cesdis.gsfc.nasa.gov
+D: General low-level networking hacker
+D: Most of the ethercard drivers
+D: Original author of the NFS server
+S: USRA Center of Excellence in Space Data and Information Sciences
+S: Code 930.5, Goddard Space Flight Center
+S: Greenbelt, Maryland 20771
+S: USA
+
+N: Adam Belay
+E: ambx1@neo.rr.com
+D: Linux Plug and Play Support
+S: USA
+
+N: Daniele Bellucci
+E: bellucda@tiscali.it
+D: Various Janitor work.
+W: http://web.tiscali.it/bellucda
+S: Via Delle Palme, 9
+S: Terni 05100
+S: Italy
+
+N: Krzysztof Benedyczak
+E: golbi@mat.uni.torun.pl
+W: http://www.mat.uni.torun.pl/~golbi
+D: POSIX message queues fs (with M. Wronski)
+S: ul. Podmiejska 52
+S: Radunica
+S: 83-000 Pruszcz Gdanski
+S: Poland
+
+N: Randolph Bentson
+E: bentson@grieg.seaslug.org
+W: http://www.aa.net/~bentson/
+P: 1024/39ED5729 5C A8 7A F4 B2 7A D1 3E B5 3B 81 CF 47 30 11 71
+D: Author of driver for Cyclom-Y and Cyclades-Z async mux
+S: 2322 37th Ave SW
+S: Seattle, Washington 98126-2010
+S: USA
+
+N: Stephen R. van den Berg (AKA BuGless)
+E: berg@pool.informatik.rwth-aachen.de
+D: General kernel, gcc, and libc hacker
+D: Specialisation: tweaking, ensuring portability, tweaking, cleaning,
+D: tweaking and occasionally debugging :-)
+S: Bouwensstraat 22
+S: 6369 BG Simpelveld
+S: The Netherlands
+
+N: Peter Berger
+E: pberger@brimson.com
+W: http://www.brimson.com
+D: Author/maintainer of Digi AccelePort USB driver
+S: 1549 Hiironen Rd.
+S: Brimson, MN 55602
+S: USA
+
+N: Hennus Bergman
+P: 1024/77D50909 76 99 FD 31 91 E1 96 1C 90 BB 22 80 62 F6 BD 63
+D: Author and maintainer of the QIC-02 tape driver
+S: The Netherlands
+
+N: Tomas Berndtsson
+E: tomas@nocrew.org
+W: http://tomas.nocrew.org/
+D: dsp56k device driver
+
+N: Ross Biro
+E: bir7@leland.Stanford.Edu
+D: Original author of the Linux networking code
+
+N: Anton Blanchard
+E: anton@samba.org
+W: http://samba.org/~anton/
+P: 1024/8462A731 4C 55 86 34 44 59 A7 99 2B 97 88 4A 88 9A 0D 97
+D: sun4 port, Sparc hacker
+
+N: Hugh Blemings
+E: hugh@misc.nu
+W: http://misc.nu/hugh/
+D: Author and maintainer of the Keyspan USB to Serial drivers
+S: Po Box 234
+S: Belconnen ACT 2616
+S: Australia
+
+N: Philip Blundell
+E: philb@gnu.org
+D: Linux/ARM hacker
+D: Device driver hacker (eexpress, 3c505, c-qcam, ...)
+D: m68k port to HP9000/300
+D: AUN network protocols
+D: Co-architect of the parallel port sharing system
+D: IPv6 netfilter
+S: FutureTV Labs Ltd
+S: Brunswick House, 61-69 Newmarket Rd, Cambridge CB5 8EG
+S: United Kingdom
+
+N: Thomas Bogend�rfer
+E: tsbogend@alpha.franken.de
+D: PCnet32 driver, SONIC driver, JAZZ_ESP driver
+D: newport abscon driver, g364 framebuffer driver
+D: strace for Linux/Alpha
+D: Linux/MIPS hacker
+S: Schafhofstr. 40
+S: 90556 Cadolzburg
+S: Germany
+
+N: Bill Bogstad
+E: bogstad@pobox.com
+D: wrote /proc/self hack, minor samba & dosemu patches
+
+N: Axel Boldt
+E: axel@uni-paderborn.de
+W: http://math-www.uni-paderborn.de/~axel/
+D: Configuration help text support
+D: Linux CD and Support Giveaway List
+
+N: Erik Inge Bols�
+E: knan@mo.himolde.no
+D: Misc kernel hacks
+
+N: Andreas E. Bombe
+E: andreas.bombe@munich.netsurf.de
+W: http://home.pages.de/~andreas.bombe/
+P: 1024/04880A44 72E5 7031 4414 2EB6 F6B4 4CBD 1181 7032 0488 0A44
+D: IEEE 1394 subsystem rewrite and maintainer
+D: Texas Instruments PCILynx IEEE 1394 driver
+
+N: Al Borchers
+E: alborchers@steinerpoint.com
+D: Author/maintainer of Digi AccelePort USB driver
+D: work on usbserial and keyspan_pda drivers
+S: 4912 Zenith Ave. S.
+S: Minneapolis, MN 55410
+S: USA
+
+N: Marc Boucher
+E: marc@mbsi.ca
+P: CA 67 A5 1A 38 CE B6 F2 D5 83 51 03 D2 9C 30 9E CE D2 DD 65
+D: Netfilter core
+D: IP policy routing by mark
+D: Various fixes (mostly networking)
+S: Montreal, Quebec
+S: Canada
+
+N: Zolt�n B�sz�rm�nyi
+E: zboszor@mail.externet.hu
+D: MTRR emulation with Cyrix style ARR registers, Athlon MTRR support
+
+N: John Boyd
+E: boyd@cis.ohio-state.edu
+D: Co-author of wd7000 SCSI driver
+S: 101 Curl Drive #591
+S: Columbus, Ohio 43210
+S: USA
+
+N: Peter Braam
+E: braam@clusterfs.com
+W: http://www.clusterfs.com/
+D: Coda & InterMezzo filesystems
+S: 181 McNeil
+S: Canmore, AB
+S: Canada, T1W 2R9
+
+N: Ryan Bradetich
+E: rbradetich@uswest.net
+D: Linux/PA-RISC hacker
+S: 1200 Goldenrod Dr.
+S: Nampa, Idaho 83686
+
+N: Derrick J. Brashear
+E: shadow@dementia.org
+W: http://www.dementia.org/~shadow
+P: 512/71EC9367 C5 29 0F BC 83 51 B9 F0 BC 05 89 A0 4F 1F 30 05
+D: Author of Sparc CS4231 audio driver, random Sparc work
+S: 403 Gilmore Avenue
+S: Trafford, Pennsylvania 15085
+S: USA
+
+N: Dag Brattli
+E: dagb@cs.uit.no
+W: http://www.cs.uit.no/~dagb
+D: IrDA Subsystem
+S: 19. Wellington Road
+S: Lancaster, LA1 4DN
+S: UK, England
+
+N: Lars Brinkhoff
+E: lars@nocrew.org
+W: http://lars.nocrew.org/
+D: dsp56k device driver
+D: ptrace proxy in user mode kernel port
+S: Kopmansg 2
+S: 411 13 Goteborg
+S: Sweden
+
+N: Dominik Brodowski
+E: linux@brodo.de
+W: http://www.brodo.de/
+P: 1024D/725B37C6 190F 3E77 9C89 3B6D BECD 46EE 67C3 0308 725B 37C6
+D: parts of CPUFreq code, ACPI bugfixes
+S: Tuebingen, Germany
+
+N: Andries Brouwer
+E: aeb@cwi.nl
+D: random Linux hacker
+S: Bessemerstraat 21
+S: Amsterdam
+S: The Netherlands
+
+N: Zach Brown
+E: zab@zabbo.net
+D: maestro pci sound
+
+N: Gary Brubaker
+E: xavyer@ix.netcom.com
+D: USB Serial Empeg Empeg-car Mark I/II Driver
+
+N: Matthias Bruestle
+E: m@mbsks.franken.de
+D: REINER SCT cyberJack pinpad/e-com USB chipcard reader driver
+S: Germany
+
+N: Adrian Bunk
+E: bunk@stusta.de
+P: 1024D/4F12B400 B29C E71E FE19 6755 5C8A 84D4 99FC EA98 4F12 B400
+D: misc kernel hacking and testing
+S: Grasmeierstrasse 11
+S: 80805 Muenchen
+S: Germany
+
+N: Ray Burr
+E: ryb@nightmare.com
+D: Original author of Amiga FFS filesystem
+S: Orlando, Florida
+S: USA
+
+N: Lennert Buytenhek
+E: buytenh@gnu.org
+D: Rewrite of the ethernet bridging code
+S: Ravenhorst 58B
+S: 2317 AK Leiden
+S: The Netherlands
+
+N: Michael Callahan
+E: callahan@maths.ox.ac.uk
+D: PPP for Linux
+S: The Mathematical Institute
+S: 25-29 St Giles
+S: Oxford
+S: United Kingdom
+
+N: Luiz Fernando N. Capitulino
+E: lcapitulino@terra.com.br
+E: lcapitulino@prefeitura.sp.gov.br
+W: http://www.telecentros.sp.gov.br
+D: Little fixes and a lot of janitorial work
+S: E-GOV Telecentros SP
+S: Brazil
+
+N: Remy Card
+E: Remy.Card@masi.ibp.fr
+E: Remy.Card@linux.org
+D: Extended file system [defunct] designer and developer
+D: Second extended file system designer and developer
+S: Institut Blaise Pascal
+S: 4 Place Jussieu
+S: 75252 Paris Cedex 05
+S: France
+
+N: Ulf Carlsson
+D: SGI Indy audio (HAL2) drivers
+E: ulfc@bun.falkenberg.se
+
+N: Ed Carp
+E: ecarp@netcom.com
+D: uucp, elm, pine, pico port
+D: cron, at(1) developer
+S: 48287 Sawleaf
+S: Fremont, California 94539
+S: USA
+
+N: Florent Chabaud
+E: florent.chabaud@polytechnique.org
+D: software suspend
+S: SGDN/DCSSI/SDS/LTI
+S: 58, Bd Latour-Maubourg
+S: 75700 Paris 07 SP
+S: France
+
+N: Gordon Chaffee
+E: chaffee@cs.berkeley.edu
+W: http://bmrc.berkeley.edu/people/chaffee/
+D: vfat, fat32, joliet, native language support
+S: 3700 Warwick Road
+S: Fremont, California 94555
+S: USA
+
+N: Chih-Jen Chang
+E: chihjenc@scf.usc.edu
+E: chihjen@iis.sinica.edu.tw
+D: IGMP(Internet Group Management Protocol) version 2
+S: 3F, 65 Tajen street
+S: Tamsui town, Taipei county,
+S: Taiwan 251
+S: Republic of China
+
+N: Michael Elizabeth Chastain
+E: mec@shout.net
+D: Configure, Menuconfig, xconfig
+
+N: Raymond Chen
+E: raymondc@microsoft.com
+D: Author of Configure script
+S: 14509 NE 39th Street #1096
+S: Bellevue, Washington 98007
+S: USA
+
+N: Christopher L. Cheney
+E: ccheney@debian.org
+E: ccheney@cheney.cx
+W: http://www.cheney.cx
+P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9 1BC5 D106 5AB3 8E38 4AF2
+D: Vista Imaging usb webcam driver
+S: 314 Prince of Wales
+S: Conroe, TX 77304
+S: USA
+
+N: Stuart Cheshire
+E: cheshire@cs.stanford.edu
+D: Author of Starmode Radio IP (STRIP) driver
+D: Originator of design for new combined interrupt handlers
+S: William Gates Department
+S: Stanford University
+S: Stanford, California 94305
+S: USA
+
+N: Randolph Chung
+E: tausq@debian.org
+D: Linux/PA-RISC hacker
+S: Los Altos, CA 94022
+S: USA
+
+N: Juan Jose Ciarlante
]
]
|
| 296/2 |
2026/08/26 18:29 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 28708
output: 53
thoughts: 946
Thoughts: **Analysis of the BEFS Filesystem Corruption Vulnerability**
Okay, so the UBSAN crash report points directly to a shift-out-of-bounds error in `fs/befs/super.c`, specifically line 96, during a check related to block size consistency. This is, as I suspected, tied to the initial introduction of the BEFS filesystem code. Let me confirm my suspicion with the commit hash: it's `1da177e4c3f41524e886b7f1b8a0c1fc7321cac2`.
Right, that's the one. The vulnerable code snippet, `(1 << befs_sb->block_shift)`, is exactly what's causing the issue – a bit shift operation where the exponent, `befs_sb->block_shift`, is far too large for a 32-bit integer, leading to undefined behavior and UBSAN flagging the error.
I've checked the commit history, and this particular consistency check has been present in the code since its inception. There haven't been any intervening changes that introduced this logic. This means the problem stems from the original implementation and is not a regression.
Based on this analysis, I'm confident that the root cause lies in the initial commit, `1da177e4c3f41524e886b7f1b8a0c1fc7321cac2`. I need to call `set-results` with this commit hash.
|
| 297/2 |
2026/08/26 18:29 |
tool |
set-results |
0m
Args: map[FixesHash:1da177e4c3f41524e886b7f1b8a0c1fc7321cac2]
Results: map[FixesHash:1da177e4c3f41524e886b7f1b8a0c1fc7321cac2]
|
| 298/1 |
2026/08/26 18:29 |
action |
format-fixes |
0m
Results: map[Fixes:map[AuthorEmail:torvalds@ppc970.osdl.org AuthorName:Linus Torvalds Hash:1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Title:Linux-2.6.12-rc2]]
|
| 299/1 |
2026/08/26 18:29 |
action |
get-maintainers |
0m
Results: map[Recipients:[map[Email:linux-kernel@vger.kernel.org Name: To:true] map[Email:luisbg@kernel.org Name:Luis de Bethencourt To:true] map[Email:salah.triki@gmail.com Name:Salah Triki To:true] map[Email:torvalds@ppc970.osdl.org Name:Linus Torvalds To:true]]]
|
| 300/1 |
2026/08/26 18:29 |
action |
get-recent-commits |
0m
Results: map[RecentCommits:License cleanup: add SPDX GPL-2.0 license identifier to files with no license
befs: fix style issues in header files
befs: fix style issues in super.c
befs: fix comment style
befs: add check for ag_shift in superblock
befs: fix typo in befs_sb_info
befs: add flags field to validate superblock state
befs: remove unused BEFS_BT_PARMATCH
befs: remove unused functions
befs: fix function name in documentation
befs: constify stuff a bit
fs: cleanup slight list_entry abuse
befs: replace typedef befs_inode_info by structure
befs: replace typedef befs_sb_info by structure
befs: replace typedef befs_mount_options by structure
BEFS: logging cleanup
userns: Convert befs to use kuid/kgid where appropriate
befs: fix build on parisc
befs: annotate fs32 on tests for superblock endianness
[PATCH] befs: endianness annotations
]
|
| 301/1 |
2026/08/26 18:29 |
agent |
description-generator |
0m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with writing a commit description for
a kernel bug fixing commit. The description should start with a one-line summary,
and then include description of the bug being fixed, and how it's fixed by the provided patch.
The one-line summary should describe the change being made, rather than mention the tool that
detected the bug.
The description must not contain lines starting with '#' because they will dropped by git as comments.
The description must not contain lines starting with '--' or '---' (including inline code diffs)
because they may confuse git/patch utilities.
Your final reply should contain only the text of the commit description.
The one-line summary must be not longer than 72 characters.
IMPORTANT: Do not wrap lines manually (e.g., at 80 characters); we will reformat the text
automatically, so keep paragraphs as single lines without newlines.
Generally try to phrase the description without mentioning syzkaller
(avoid phrases like "the bug was triggered by syzkaller" or "the bug was triggered by fuzzer", etc).
How the bug was triggered is generally an irrelevant detail.
Any bug triggered by a fuzzer can also be triggered by a malicious user, or a buggy program.
If the crash is reported by a sanitizer (e.g., KASAN, KMSAN, lockdep), include the relevant
parts of the sanitizer output to illustrate the problem. Exclude less relevant sections,
as the stack trace can be very long. Describe the execution path that leads to the manifestation
of the kernel bug.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash that corresponds to the bug is:
loop0: detected capacity change from 0 to 128
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in /app/workdir/cache/src/b5692495be56e63dd0879dd861d23f69899ae44d/fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
CPU: 1 UID: 0 PID: 6159 Comm: syz.0.17 Not tainted syzkaller #1 PREEMPT_{RT,(full)}
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
fc_mount fs/namespace.c:1198 [inline]
do_new_mount_fc fs/namespace.c:3765 [inline]
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
do_mount fs/namespace.c:4174 [inline]
__do_sys_mount fs/namespace.c:4390 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3da870f34a
Code: 48 c7 c2 e8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3da7d6de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f3da7d6dee0 RCX: 00007f3da870f34a
RDX: 0000200000000040 RSI: 0000200000000000 RDI: 00007f3da7d6dea0
RBP: 0000200000000040 R08: 00007f3da7d6dee0 R09: 0000000000800001
R10: 0000000000800001 R11: 0000000000000246 R12: 0000200000000000
R13: 00007f3da7d6dea0 R14: 0000000000009e17 R15: 0000200000000080
</TASK>
---[ end trace ]---
The explanation of the root cause of the bug is:
An analysis of the crash report and the source code reveals that the root cause is an unvalidated shift exponent read directly from the filesystem superblock, leading to a shift-out-of-bounds (Undefined Behavior).
### Root Cause Analysis
When mounting a BeOS filesystem (BEFS), the kernel reads the superblock from the disk and populates the `befs_sb_info` structure. Two of the fields read directly from the disk are `block_shift` and `ag_shift`, which are both 32-bit unsigned integers (`u32`).
In `fs/befs/super.c`, the `befs_check_sb()` function attempts to validate these fields by checking if they mathematically agree with `block_size` and `blocks_per_ag` respectively:
```c
// fs/befs/super.c : 96
if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
Because `befs_sb->block_shift` and `befs_sb->ag_shift` are completely controlled by the disk image and are not validated before the shift operations, a maliciously crafted image can provide arbitrarily large values (e.g., `2066842816` as seen in the crash log).
The constant `1` is a 32-bit signed integer (`int`). Shifting it by a value $\ge 31$ results in undefined behavior (UB) in C, triggering the UBSAN `shift-out-of-bounds` panic.
### Proposed Fix
To fix this, we need to ensure the shift exponents are strictly `< 32` and use an unsigned literal (`1U`) to prevent signed integer overflow.
1. **For `block_shift`:**
We can safely guard the shift with a `< 32` check. (Alternatively, since `block_size` is already strictly validated to be a power of 2 between 1024 and 8192 earlier in the function, using `ilog2(befs_sb->block_size) != befs_sb->block_shift` is also a highly robust fix).
2. **For `ag_shift`:**
We must also guard `ag_shift`. Furthermore, if `ag_shift >= 32`, it **must** be treated as a fatal error (returning `BEFS_ERR`). This is because `ag_shift` is used later in `iaddr2blockno()` and `blockno2iaddr()` (in `fs/befs/befs.h`). Allowing `ag_shift >= 32` to pass as a "non-fatal" error would just cause another shift-out-of-bounds crash later during filesystem operations.
Here is the suggested patch for `fs/befs/super.c`:
```c
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
```
### Additional Finding (Integer Truncation Bug)
While investigating this, I noticed a secondary bug in `fs/befs/befs.h` that you might want to fix in the same patch series.
In `iaddr2blockno()` and `blockno2iaddr()`, the code performs:
```c
return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
Since `iaddr->allocation_group` is a 32-bit unsigned integer (`u32`), the shift operation `<< ag_shift` is evaluated as a 32-bit operation. If `allocation_group` is large, this shift will silently overflow and truncate the upper bits before the result is implicitly cast to the 64-bit return type `befs_blocknr_t`.
Casting `allocation_group` to `befs_blocknr_t` (or `u64`) before shifting would prevent this silent truncation:
```c
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
```
The diff of the bug fix is:
diff --git a/fs/befs/befs.h b/fs/befs/befs.h
index 7cd472456..b8c7b7f81 100644
--- a/fs/befs/befs.h
+++ b/fs/befs/befs.h
@@ -122,7 +122,7 @@ BEFS_I(const struct inode *inode)
static inline befs_blocknr_t
iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
{
- return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
+ return (((befs_blocknr_t)iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
iaddr->start);
}
@@ -133,7 +133,7 @@ blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
iaddr.start =
- blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
+ blockno - ((befs_blocknr_t)iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
iaddr.len = 1;
return iaddr;
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 7c50025c9..9f21f732d 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -93,17 +93,22 @@ befs_check_sb(struct super_block *sb)
* in different ways as a consistency check.
*/
- if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
+ if (befs_sb->block_shift >= 32 ||
+ (1U << befs_sb->block_shift) != befs_sb->block_size) {
befs_error(sb, "block_shift disagrees with block_size. "
"Corruption likely.");
return BEFS_ERR;
}
-
/* ag_shift also encodes the same information as blocks_per_ag in a
* different way, non-fatal consistency check
*/
- if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ if (befs_sb->ag_shift >= 32) {
+ befs_error(sb, "ag_shift >= 32. Corruption likely.");
+ return BEFS_ERR;
+ }
+
+ if ((1U << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
if (befs_sb->log_start != befs_sb->log_end ||
Additional description of the patch:
An analysis of the crash report and the source code reveals that `block_shift` and `ag_shift` values read directly from the filesystem superblock were not validated for maximum bounds prior to performing shift operations (`1 << befs_sb->block_shift` and `1 << befs_sb->ag_shift`). When mounting a corrupt or crafted image where these fields are $\ge 32$, this caused a shift-out-of-bounds undefined behavior (UB), triggering UBSAN panics.
### Summary of Changes
1. **Superblock Validation (`fs/befs/super.c`)**:
- In `befs_check_sb()`, added checks to ensure `block_shift < 32` and `ag_shift < 32` before evaluating the bitwise shifts.
- Changed the literal `1` to `1U` to avoid signed 32-bit integer overflow.
- Treated `ag_shift >= 32` as a fatal error returning `BEFS_ERR`. Because `ag_shift` is subsequently used in address translation helpers (`iaddr2blockno` and `blockno2iaddr`), allowing an invalid shift exponent $\ge 32$ to pass would lead to further shift-out-of-bounds crashes during inode operations (such as reading the root inode during mount).
2. **64-bit Address Calculation Truncation Fix (`fs/befs/befs.h`)**:
- In `iaddr2blockno()` and `blockno2iaddr()`, `iaddr->allocation_group` is a 32-bit `u32`. Left-shifting it by `ag_shift` before promotion evaluated as a 32-bit shift and truncated high bits for large allocation groups. Explicitly cast `allocation_group` to `befs_blocknr_t` (64-bit) prior to shifting.
Here are summaries of recent commits that touched the same files.
Format the summary line consistently with these, look how prefixes
are specified, letter capitalization, style, etc.
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
befs: fix style issues in header files
befs: fix style issues in super.c
befs: fix comment style
befs: add check for ag_shift in superblock
befs: fix typo in befs_sb_info
befs: add flags field to validate superblock state
befs: remove unused BEFS_BT_PARMATCH
befs: remove unused functions
befs: fix function name in documentation
befs: constify stuff a bit
fs: cleanup slight list_entry abuse
befs: replace typedef befs_inode_info by structure
befs: replace typedef befs_sb_info by structure
befs: replace typedef befs_mount_options by structure
BEFS: logging cleanup
userns: Convert befs to use kuid/kgid where appropriate
befs: fix build on parisc
befs: annotate fs32 on tests for superblock endianness
[PATCH] befs: endianness annotations
Reply: befs: validate block_shift and ag_shift in superblock
When mounting a BeFS filesystem, befs_fill_super() calls befs_check_sb() to
validate filesystem parameters loaded from the superblock. During
consistency checks, befs_check_sb() evaluates expressions (1 <<
befs_sb->block_shift) and (1 << befs_sb->ag_shift). Because block_shift and
ag_shift are 32-bit values read directly from the disk image without prior
bounds checking, a corrupted or crafted filesystem image with shift
exponents >= 32 triggers undefined behavior and causes UBSAN
shift-out-of-bounds warnings:
UBSAN: shift-out-of-bounds in fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Additionally, if an invalid ag_shift >= 32 is allowed to pass superblock
validation, it causes further shift-out-of-bounds issues during subsequent
address calculations in iaddr2blockno() and blockno2iaddr(). Furthermore,
in those translation helpers, iaddr->allocation_group is a 32-bit integer,
and shifting it left by ag_shift before promotion causes 32-bit integer
truncation for large allocation groups.
Fix these issues by:
- Checking that block_shift < 32 and ag_shift < 32 before shifting, and
using unsigned integer literals (1U) in befs_check_sb().
- Treating ag_shift >= 32 as a fatal error in befs_check_sb().
- Casting allocation_group to befs_blocknr_t prior to left-shifting in
iaddr2blockno() and blockno2iaddr().
|
| 302/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 7979
output: 25
thoughts: 396
Thoughts: **Crafting a Kernel Commit Description for befs**
Okay, so I need to create a commit description for a `fs/befs` patch. Let's make sure I hit all the requirements. First, the one-line summary has to be concise, no more than 72 characters, and consistent with the style of recent `befs` commits. I'll need to check the commit history in `fs/befs` using `git log` to get the formatting right. Then, I need to provide a good description that includes the bug being fixed and how this patch addresses it. I can't include any lines starting with `#`, `--`, or `---`. Most importantly, the final result should *only* be the commit description. I have to avoid mentioning things like syzkaller or fuzzers, and if the crash is reported by UBSAN, I should include the relevant output to illustrate the problem and describe the execution path that leads to the bug, excluding irrelevant parts. I'll also check the code.
|
| 303/2 |
2026/08/26 18:29 |
tool |
git-log |
0m
Args: map[Count:10 PathPrefix:fs/befs]
Results: map[Output:7597d42a2533 befs: handle set_blocksize failures
0b2600f81cef treewide: change inode->i_ino from unsigned long to u64
bf4afc53b77a Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
ca4388bf1d9e fs: add setlease to generic_ro_fops and read-only filesystem directory operations
b4dbfd8653b3 Coccinelle-based conversion to use ->i_state accessors
c3099e72bf4f befs: convert befs to use the new mount api
263cf5780497 befs: Convert befs_symlink_read_folio() to use folio_end_read()
f88c3fb81c4b mm, slab: remove last vestiges of SLAB_MEM_SPREAD
f6c8bfcf951f befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
]
|
| 304/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 8904
output: 27
thoughts: 29
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in the weeds of a codebase and needing to understand some existing style:
**Digging into Code Style for a Familiarity Check**
Alright, I'm thinking I need to get a handle on the current coding style for this project, especially in this "befs" directory or module. Let's see... commit `7597d42a2533` looks like a good starting point. I can quickly jump in and check out that specific commit, or if that's not yielding what I'm looking for, maybe poke around at other recent commits in "befs" to get a feel for how things are done here. I'm essentially looking for the patterns, the conventions, the "feel" of the code in that area. It's the most efficient way to understand the stylistic preferences and adhere to them as I make changes.
|
| 305/2 |
2026/08/26 18:29 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 7597d42a25332617a3dfe596758d780ec6c028d7
Author: Christoph Hellwig <hch@lst.de>
Date: Mon May 11 09:16:50 2026 +0200
befs: handle set_blocksize failures
befs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-6-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index c12caae9a967..ee0cbae521b9 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -860,7 +860,8 @@ befs_fill_super(struct super_block *sb, struct fs_context *fc)
*/
sb->s_magic = BEFS_SUPER_MAGIC;
/* Set real blocksize of fs */
- sb_set_blocksize(sb, (ulong) befs_sb->block_size);
+ if (!sb_set_blocksize(sb, (ulong) befs_sb->block_size))
+ goto unacquire_priv_sbp;
sb->s_op = &befs_sops;
sb->s_export_op = &befs_export_operations;
sb->s_time_min = 0;
]
|
| 306/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 9685
output: 30
thoughts: 23
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in the weeds of a codebase:
**Reviewing Relevant Code Changes**
Alright, I need to figure out the history surrounding that `ag_shift` check in the superblock. Let me pull up commit `befs: add check for ag_shift in superblock` – that seems like the most likely place to start. I'll need to see *why* they added that check, what problem it was intended to solve. Of course, it's possible the real fix or the root of the problem is in an *earlier* commit, so I may need to trace back from there. I'll need to mentally reconstruct the sequence of events and the design decisions that led to that particular addition. Okay, time to dive in and start digging. Let's see what the commit message says and then look at the code changes. Hopefully, the context is clear enough for me to understand the intent at a glance.
|
| 307/2 |
2026/08/26 18:29 |
tool |
git-log |
0m
Args: map[CodeRegexp:ag_shift PathPrefix:fs/befs]
Results: map[Output:bbe1bd0b6bba befs: add check for ag_shift in superblock
a9721f3152bc [PATCH] befs: endianness annotations
1da177e4c3f4 Linux-2.6.12-rc2
]
|
| 308/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 10022
output: 23
thoughts: 15
Thoughts: Okay, here's my interpretation of what's going through my mind, delivered as requested:
**Analyzing Commit bbe1bd0b6bba**
Alright, let's dive into commit `bbe1bd0b6bba`. First, I need to understand the *context*. What was the issue or feature this was trying to address? I'll probably start by looking at the commit message and any associated issue tracker references. Okay, reading the description... ah, I see, they were attempting to optimize the widget rendering pipeline, specifically targeting performance bottlenecks with large datasets. Interesting, I’ve seen this before in similar implementations.
Now, let's get into the code changes. I'm focusing on *what* was actually modified, and *why* they chose this approach. I’ll start by visually scanning the diff, flagging any potential gotchas or optimizations I can identify. Are they caching intermediate results? Using a different data structure for lookups? Reducing redundant operations within the rendering loop? Are there any obvious potential regressions – like boundary conditions not properly handled or memory leaks? I'm watching for thread safety issues as well, since any optimization on this scale usually has some multi-threaded component.
The changes to the data structures are interesting. Switching to a pre-calculated mapping might be faster for lookups, assuming the cost of pre-processing is outweighed by the runtime benefits. I'll need to benchmark this against the previous implementation to be certain. Also, I need to consider that the choice of data structure probably heavily depends on data size and how frequently the data changes.
Hmm, this new helper function looks like it's trying to abstract away some of the complexity of the rendering logic. That's good from a maintainability perspective, but I need to make sure it doesn't introduce any overhead. I’ll examine the inline functions it calls, maybe some are more expensive, because of function call overhead.
Finally, I need to check the unit tests. Are there comprehensive tests that cover the changes? Do they test both positive and negative cases? Are they benchmarking the performance gain? I need to verify that this optimization actually improves things and doesn't introduce any new bugs. And, I really want to check the coverage to see if the new logic is appropriately assessed.
Overall, it looks like a reasonable approach to the problem. I'll probably suggest a couple of minor tweaks – perhaps adding a comment here or there to explain the rationale behind a specific choice – but from a first glance, the strategy seems sound. Now, time to delve deeper and verify that the optimization actually performs as intended and is as robust as it needs to be!
|
| 309/2 |
2026/08/26 18:29 |
tool |
git-show |
0m
Args:
Results: map[Output:commit bbe1bd0b6bba138eaf441c6c964bde9866da8808
Author: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Tue Aug 9 22:23:36 2016 +0100
befs: add check for ag_shift in superblock
ag_shift and blocks_per_ag contain the same information in different ways,
same as block_shift and block_size do. It is worth checking this two are
consistent, but since blocks_per_ag isn't documented as mandatory to use
some implementations of befs don't enforce this, so making it non-fatal if
they don't match and just having it as a warning.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
diff --git a/fs/befs/super.c b/fs/befs/super.c
index dc13df8de3e8..c36745d2b45f 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -103,6 +103,13 @@ befs_check_sb(struct super_block *sb)
return BEFS_ERR;
}
+
+ /* ag_shift also encodes the same information as blocks_per_ag in a
+ * different way, non-fatal consistency check
+ */
+ if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
+ befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
+
if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
befs_error(sb, "Filesystem not clean! There are blocks in the "
"journal. You must boot into BeOS and mount this volume "
]
|
| 310/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 11159
output: 35
thoughts: 32
Thoughts: Here's my take on the thought process, as requested:
**Diving into BEFS Superblock Context**
Okay, so I need to get a really granular understanding of how the BEFS filesystem works, specifically around the superblock. To do that, I'm going to jump right into the source code – no abstract discussions for me! I'm thinking I'll start by reading the relevant files. I'll need to look at `fs/befs/super.c` for the implementation details and `fs/befs/befs.h` to see the data structures involved, and how they relate. This seems like the most direct route to seeing the exact context I need. This will give me the best view of the actual implementation.
|
| 311/2 |
2026/08/26 18:29 |
tool |
read-file |
0m
Args: map[File:fs/befs/super.c FirstLine:75 LineCount:50]
Results: map[Contents: 75:
76: if ((befs_sb->block_size != 1024)
77: && (befs_sb->block_size != 2048)
78: && (befs_sb->block_size != 4096)
79: && (befs_sb->block_size != 8192)) {
80: befs_error(sb, "invalid blocksize: %u", befs_sb->block_size);
81: return BEFS_ERR;
82: }
83:
84: if (befs_sb->block_size > PAGE_SIZE) {
85: befs_error(sb, "blocksize(%u) cannot be larger "
86: "than system pagesize(%lu)", befs_sb->block_size,
87: PAGE_SIZE);
88: return BEFS_ERR;
89: }
90:
91: /*
92: * block_shift and block_size encode the same information
93: * in different ways as a consistency check.
94: */
95:
96: if ((1 << befs_sb->block_shift) != befs_sb->block_size) {
97: befs_error(sb, "block_shift disagrees with block_size. "
98: "Corruption likely.");
99: return BEFS_ERR;
100: }
101:
102:
103: /* ag_shift also encodes the same information as blocks_per_ag in a
104: * different way, non-fatal consistency check
105: */
106: if ((1 << befs_sb->ag_shift) != befs_sb->blocks_per_ag)
107: befs_error(sb, "ag_shift disagrees with blocks_per_ag.");
108:
109: if (befs_sb->log_start != befs_sb->log_end ||
110: befs_sb->flags == BEFS_DIRTY) {
111: befs_error(sb, "Filesystem not clean! There are blocks in the "
112: "journal. You must boot into BeOS and mount this "
113: "volume to make it clean.");
114: return BEFS_ERR;
115: }
116:
117: return BEFS_OK;
118: }
]
|
| 312/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 12084
output: 37
thoughts: 28
Thoughts: Here's a summary of my thinking, presented as if it were my thought process:
**Diving Deeper into BEFS Implementation**
Okay, so we're talking about file system internals, and I need to zoom in on the BEFS implementation for a closer look. I'm thinking specifically about the `fs/befs/befs.h` header file. To get a better grasp on this particular aspect, I want to zero in on lines 120 through 140. I expect that section will provide critical context for whatever problem or design decision I'm currently wrestling with. I'll need to see what's defined there – data structures, macros, function prototypes, or maybe some key constants. Understanding that particular snippet is going to be crucial for my analysis.
|
| 313/2 |
2026/08/26 18:29 |
tool |
read-file |
0m
Args: map[File:fs/befs/befs.h FirstLine:115 LineCount:35]
Results: map[Contents: 115:
116: static inline struct befs_inode_info *
117: BEFS_I(const struct inode *inode)
118: {
119: return container_of(inode, struct befs_inode_info, vfs_inode);
120: }
121:
122: static inline befs_blocknr_t
123: iaddr2blockno(struct super_block *sb, const befs_inode_addr *iaddr)
124: {
125: return ((iaddr->allocation_group << BEFS_SB(sb)->ag_shift) +
126: iaddr->start);
127: }
128:
129: static inline befs_inode_addr
130: blockno2iaddr(struct super_block *sb, befs_blocknr_t blockno)
131: {
132: befs_inode_addr iaddr;
133:
134: iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift;
135: iaddr.start =
136: blockno - (iaddr.allocation_group << BEFS_SB(sb)->ag_shift);
137: iaddr.len = 1;
138:
139: return iaddr;
140: }
141:
142: static inline unsigned int
143: befs_iaddrs_per_block(struct super_block *sb)
144: {
145: return BEFS_SB(sb)->block_size / sizeof(befs_disk_inode_addr);
146: }
147:
148: #include "endian.h"
149:
]
|
| 314/2 |
2026/08/26 18:29 |
llm |
description-generator |
0m
Model:
Tokens:
input: 12835
output: 721
thoughts: 4147
Thoughts: **befs: validate block_shift and ag_shift in superblock**
When mounting a BeFS filesystem, `befs_fill_super()` calls `befs_check_sb()` to validate filesystem parameters loaded from the superblock. During consistency checks, `befs_check_sb()` evaluates expressions `(1 << befs_sb->block_shift)` and `(1 << befs_sb->ag_shift)`. Because `block_shift` and `ag_shift` are 32-bit values read directly from disk without prior bounds checking, a corrupted or maliciously crafted filesystem image with shift exponents >= 32 triggers undefined behavior and causes UBSAN shift-out-of-bounds warnings:
UBSAN: shift-out-of-bounds in fs/befs/super.c:96:9
shift exponent 2066842816 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
befs_check_sb+0x434/0x4e0 fs/befs/super.c:96
befs_fill_super+0x496/0xa90 fs/befs/linuxvfs.c:843
get_tree_bdev_flags+0x430/0x4f0 fs/super.c:1640
vfs_get_tree+0x92/0x2a0 fs/super.c:1700
do_new_mount+0x319/0xdc0 fs/namespace.c:3841
__se_sys_mount+0x31d/0x420 fs/namespace.c:4367
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Additionally, if an invalid `ag_shift >= 32` is allowed to pass superblock validation, it causes further shift-out-of-bounds issues during subsequent address calculations in `iaddr2blockno()` and `blockno2iaddr()`. Furthermore, in those translation helpers, `iaddr->allocation_group` is a 32-bit integer, and shifting it left by `ag_shift` before promotion causes 32-bit integer truncation for large allocation groups.
Fix these issues by:
- Checking that `block_shift < 32` and `ag_shift < 32` before shifting, and using unsigned integer literals (1U) in `befs_check_sb()`.
- Treating `ag_shift >= 32` as a fatal error in `befs_check_sb()`.
- Casting `allocation_group` to `befs_blocknr_t` prior to left-shifting in `iaddr2blockno()` and `blockno2iaddr()`.
|