| 0/0 |
2026/06/01 16:58 |
flow |
assessment-security |
49m
Results: map[DenialOfService:true Explanation:**Bug Analysis:**
The bug is a Use-After-Free (UAF) in the ALSA OSS emulation layer, specifically
in `snd_pcm_oss_look_for_setup()`.
**Root Cause:**
The vulnerability originates in `snd_pcm_oss_proc_write()`, which is the write
handler for the `/proc/asound/cardX/pcmYp/oss` procfs file. When a user writes
configuration data to this file, the kernel allocates a new `snd_pcm_oss_setup`
object and links it into the `pstr->oss.setup_list` linked list.
After linking the object, the code attempts to duplicate the task name using
`kstrdup()`. If this memory allocation fails (e.g., due to memory pressure or
fault injection), the code frees the `setup` object using `kfree(setup)` but
crucially **fails to remove it from the `setup_list`**.
This leaves a dangling pointer in the list. Later, when an application opens the
OSS device (e.g., `/dev/dsp`), `snd_pcm_oss_look_for_setup()` traverses the
`setup_list` and accesses the freed `setup` object, triggering the UAF.
**Security Impact Assessment:**
* **Exploitable / Denial of Service:** Yes. The bug is a classic
Use-After-Free of a 32-byte slab object. Accessing the freed memory can lead to
a kernel crash (Denial of Service). If an attacker can reliably reallocate the
freed object with controlled data, they could manipulate the `setup->task_name`
pointer to achieve an arbitrary read primitive during the `strcmp()` check, or
control the OSS setup parameters copied out of the struct.
* **Accessible From Unprivileged Processes / User Namespaces:** **No.** The
vulnerable code path can only be reached by writing to the
`/proc/asound/cardX/pcmYp/oss` file. This procfs file is explicitly created with
`0644` permissions (`S_IFREG | 0644`) and is owned by the global root
(`GLOBAL_ROOT_UID`).
* An unprivileged user cannot write to this file due to standard DAC
permissions.
* Even within a user namespace where an unprivileged user maps their UID
to 0 and mounts a fresh `procfs`, the VFS `HAS_UNMAPPED_ID` check will block
write access. The file remains owned by the host's root UID, which is
unmapped in the user namespace, resulting in an `-EACCES` error.
* **Other Triggers (Network, Peripheral, VM, Filesystem):** No. The bug is
strictly tied to a local user-space write operation to a specific procfs file.
It cannot be triggered remotely, via malicious filesystems, or by simply
plugging in a peripheral device (a user-space component would still need to
write to the proc file).
**Conclusion:**
While this is a valid memory corruption bug (Use-After-Free), it strictly
requires `root` privileges to trigger because it relies on writing to a
root-owned procfs file. Since the attacker must already possess root access to
exploit it, the bug does not cross any security boundaries and poses no risk of
privilege escalation from an unprivileged context. Exploitable:true FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
|
| 1/1 |
2026/06/01 16:58 |
action |
syz-repro-to-c-repro |
0m
Results:
|
| 2/1 |
2026/06/01 16:58 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/696b1bd2544595eb0539dcbe2c0c1c9465478908]
|
| 3/1 |
2026/06/01 16:58 |
action |
kernel-builder |
28m
Results: map[KernelObj:/app/workdir/cache/build/eb55ef1f168c4231ff4942ec648ecb64939241a7]
|
| 4/1 |
2026/06/01 17:27 |
action |
codesearch-prepare |
13m
Results: map[Index:codesearch-index]
|
| 5/1 |
2026/06/01 17:40 |
agent |
expert |
7m
Model:
Results: map[DenialOfService:true Exploitable:true FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
Instruction: You are an experienced Linux kernel security engineer. Your task is to analyze given kernel bug report
and determine its security impact based on the following dimensions.
Use the provided tools to examine the source code, check for capability checks (e.g., capable(), ns_capable()),
and understand the nature of the bug. Analyze the given kernel build and configuration.
You can check the kernel config by grepping ".config" file; you can check kernel cmdline by grepping
".config" file for "CONFIG_CMDLINE=". Assume sysctl parameters have default values.
But analyze for the corresponding production build w/o debugging tools enabled (like KASAN, KMSAN, UBSAN).
Try different strategies when analyzing the bug:
- think of ways in which the vulnerable code is unreachable
- or the other way around: try to come up with different ideas of how an unprivileged user can reach the bug
If still unsure err on the side of the bug being non-exploitable/not-accessible.
In the final reply, provide a reasoning for your assessment.
Analysis dimensions:
* Exploitable:
Determine if the bug can result in memory corruption or elevated privileges.
Memory safety issues are almost always exploitable (KASAN or UBSAN reports for use-after-free, out-of-bounds;
refcounting issues, corrupted lists, etc). When kernel is crashing on a completely wild pointer access
(e.g. user-space address, or non-canonical address, but not on NULL or address corresponding to KASAN shadow
for NULL address), including both data accesses and control transfers, that also usually implies possibility
of exploitation. Such reports usually say "unable to handle kernel paging request".
Uses of uninitialized values detected by KMSAN may be exploitable b/c attacker frequently can affect uninit
values with spraying techniques. However, for these exploitability depends on how exactly the uninit value
is used in the code, and what it affects.
Think of what happens after the bug is triggered. Some bugs cause kernel panic and halt execution,
they are harder to exploit. For example, BUG reports halts the kernel. However, WARNING reports don't halt
execution in production builds. Debug bug detection tools (like KASAN, KMSAN, KCSAN, UBSAN) are also not enabled
in production builds, so attacker can freely exploit these bugs w/o being detected by these tools.
If you see an integer overflow, think how the overflowed value used later (if it's used as allocation size,
or an array index). If you see an out-of-bounds read, think if it's followed by an out-of-bounds write as well.
Some KCSAN data-races may be exploitable by skilled attackers as well. Think what data structures got corrupted
as the result of data races and how. However, note that kernel has lots of "benign" data races that don't lead
to any runtime misbehavior at all.
* Denial Of Service:
Determine if the bug can result in denial-of-service. Most bugs can, since they cause system crash,
hangs, deadlocks, or resource leaks. This is mostly applicable to WARNING bugs that won't cause system crash
in production. For these think what will be consequences of the violation of the kernel assumptions flagged
by the WARNING. In some cases the unexpected condition is also properly handled by the normal control flow
(e.g. with "if (WARN_ON(...))"), these won't cause denial-of-service. If the condition is not handled,
then it may or may not cause denial-of-service.
* Accessible From Unprivileged Processes:
Determine if the bug can be reached from a typical (non-root) user process that does NOT have any special capabilities
(like CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON) or access to device nodes restricted to root.
Assume that unprivileged_bpf_disabled=1, that is eBPF loading is not accessible. However, cBPF (classical BPF)
is still accessible to non-root processes.
Assume that user namespaces are not accessible, that is, the process cannot get the mentioned capabilities even
within a new user namespace (checked by ns_capable() function in the kernel sources).
* Accessible From User Namespaces:
Determine if the bug can be reached within a user-namespace where the process has all capabilities
(including CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON). Such capabilities are checked with ns_capable()
function in the kernel sources.
* VM Guest Trigger:
Determine if the bug can be triggered from the context of a typical KVM guest (e.g., set up by a QEMU VMM).
Consider accesses to standard Linux host paravirtualized features (virtio-blk, virtio-net, etc.),
and handling of VM exits in the KVM code.
* VM Host Trigger in The Confidential Computing Context:
Determine if the bug can be triggered in a confidential computing guest kernel from the context of a KVM host.
Consider access to standard Linux guest paravirtualized features (virtio-blk, virtio-net, etc.).
* Ethernet Network Trigger:
Determine if the bug can be triggered by processing ingress network Ethernet traffic, either directly (network stack)
or via drivers exposed to network data.
* Other Remote Trigger:
Determine if the bug can be triggered by processing remote traffic other than Ethernet (Wifi, Bluetooth, NFC, etc).
* Peripheral Trigger:
Determine if the bug can be triggered via an untrusted peripheral device that can be physically plugged
into a system, such as a USB device or a niche hardware driver handling external hardware inputs.
This is particularly important for mobile and desktop environments where users can plug in unknown devices.
* Malicious Filesystem Trigger:
Determine if the bug can be triggered by the kernel mounting and parsing a malicious filesystem image.
This is highly critical for Desktop and Mobile environments where external media or downloaded images
might be auto-mounted.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The kernel bug report is:
==================================================================
BUG: KASAN: slab-use-after-free in snd_pcm_oss_look_for_setup+0x2d3/0x370 sound/core/oss/pcm_oss.c:2355
Read of size 8 at addr ffff888022f56d00 by task syz.1.988/10837
CPU: 0 UID: 0 PID: 10837 Comm: syz.1.988 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x13d/0x4b0 mm/kasan/report.c:482
kasan_report+0xdf/0x1d0 mm/kasan/report.c:595
snd_pcm_oss_look_for_setup+0x2d3/0x370 sound/core/oss/pcm_oss.c:2355
snd_pcm_oss_open+0xddc/0x1390 sound/core/oss/pcm_oss.c:2521
soundcore_open+0x2e3/0x5a0 sound/sound_core.c:594
chrdev_open+0x234/0x6a0 fs/char_dev.c:411
do_dentry_open+0x6d8/0x1660 fs/open.c:947
vfs_open+0x82/0x3f0 fs/open.c:1079
do_open fs/namei.c:4699 [inline]
path_openat+0x208c/0x31a0 fs/namei.c:4858
do_file_open+0x20e/0x430 fs/namei.c:4887
do_sys_openat2+0x10d/0x1e0 fs/open.c:1364
do_sys_open fs/open.c:1370 [inline]
__do_sys_openat fs/open.c:1386 [inline]
__se_sys_openat fs/open.c:1381 [inline]
__x64_sys_openat+0x12d/0x210 fs/open.c:1381
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x10b/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fda1919ce59
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fda1a0fa028 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007fda19416090 RCX: 00007fda1919ce59
RDX: 0000000000020342 RSI: 00002000000001c0 RDI: ffffffffffffff9c
RBP: 00007fda19232d6f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fda19416128 R14: 00007fda19416090 R15: 00007ffdc6f4a5c8
</TASK>
Allocated by task 10831:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kmalloc_noprof include/linux/slab.h:950 [inline]
snd_pcm_oss_proc_write+0x736/0x9a0 sound/core/oss/pcm_oss.c:3058
snd_info_text_entry_release+0xfb/0x260 sound/core/info.c:386
close_pdeo.part.0+0xdf/0x2e0 fs/proc/inode.c:242
close_pdeo fs/proc/inode.c:540 [inline]
proc_reg_release+0x2df/0x350 fs/proc/inode.c:546
__fput+0x3ff/0xb50 fs/file_table.c:510
task_work_run+0x150/0x240 kernel/task_work.c:233
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
__exit_to_user_mode_loop kernel/entry/common.c:67 [inline]
exit_to_user_mode_loop+0x107/0x4f0 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:238 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x6f2/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 10831:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2689 [inline]
slab_free mm/slub.c:6250 [inline]
kfree+0x223/0x6c0 mm/slub.c:6565
snd_pcm_oss_proc_write+0x7b1/0x9a0 sound/core/oss/pcm_oss.c:3072
snd_info_text_entry_release+0xfb/0x260 sound/core/info.c:386
close_pdeo.part.0+0xdf/0x2e0 fs/proc/inode.c:242
close_pdeo fs/proc/inode.c:540 [inline]
proc_reg_release+0x2df/0x350 fs/proc/inode.c:546
__fput+0x3ff/0xb50 fs/file_table.c:510
task_work_run+0x150/0x240 kernel/task_work.c:233
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
__exit_to_user_mode_loop kernel/entry/common.c:67 [inline]
exit_to_user_mode_loop+0x107/0x4f0 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:238 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x6f2/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888022f56d00
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
freed 32-byte region [ffff888022f56d00, ffff888022f56d20)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888022f56240 pfn:0x22f56
flags: 0xfff00000000200(workingset|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000200 ffff88813fe2f780 ffffea0000d47510 ffffea0000ca7a10
raw: ffff888022f56240 000000080040003f 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0xd2800(GFP_NOWAIT|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 5387, tgid 5387 (getty), ts 194081637728, free_ts 194058318447
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x153/0x170 mm/page_alloc.c:1858
prep_new_page mm/page_alloc.c:1866 [inline]
get_page_from_freelist+0x11a6/0x33b0 mm/page_alloc.c:3946
__alloc_frozen_pages_noprof+0x27c/0x2bc0 mm/page_alloc.c:5226
alloc_slab_page mm/slub.c:3278 [inline]
allocate_slab mm/slub.c:3467 [inline]
new_slab+0xa6/0x6c0 mm/slub.c:3525
refill_objects+0x277/0x420 mm/slub.c:7271
refill_sheaf mm/slub.c:2816 [inline]
__pcs_replace_empty_main+0x375/0x650 mm/slub.c:4651
alloc_from_pcs mm/slub.c:4749 [inline]
slab_alloc_node mm/slub.c:4883 [inline]
__kmalloc_cache_noprof+0x493/0x6f0 mm/slub.c:5414
kmalloc_noprof include/linux/slab.h:950 [inline]
slab_free_hook mm/slub.c:2641 [inline]
slab_free mm/slub.c:6250 [inline]
kmem_cache_free+0x41e/0x6c0 mm/slub.c:6377
tear_down_vmas+0x2a5/0x600 mm/mmap.c:1262
exit_mmap+0x469/0xa10 mm/mmap.c:1320
__mmput+0x12a/0x410 kernel/fork.c:1178
mmput+0x67/0x80 kernel/fork.c:1201
exit_mm kernel/exit.c:582 [inline]
do_exit+0x8b2/0x2af0 kernel/exit.c:964
do_group_exit+0xd5/0x2a0 kernel/exit.c:1119
__do_sys_exit_group kernel/exit.c:1130 [inline]
__se_sys_exit_group kernel/exit.c:1128 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1128
x64_sys_call+0x102c/0x1530 arch/x86/include/generated/asm/syscalls_64.h:232
page last free pid 15 tgid 15 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
__free_pages_prepare mm/page_alloc.c:1402 [inline]
__free_frozen_pages+0x747/0x1040 mm/page_alloc.c:2943
__pagetable_free include/linux/mm.h:3661 [inline]
pagetable_free include/linux/mm.h:3685 [inline]
pagetable_dtor_free include/linux/mm.h:3784 [inline]
__tlb_remove_table include/asm-generic/tlb.h:221 [inline]
__tlb_remove_table_free mm/mmu_gather.c:228 [inline]
tlb_remove_table_rcu+0x2cf/0x380 mm/mmu_gather.c:291
rcu_do_batch kernel/rcu/tree.c:2617 [inline]
rcu_core+0x5a2/0x10d0 kernel/rcu/tree.c:2869
handle_softirqs+0x1ea/0xa00 kernel/softirq.c:622
run_ksoftirqd kernel/softirq.c:1076 [inline]
run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068
smpboot_thread_fn+0x3d3/0xaa0 kernel/smpboot.c:160
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Memory state around the buggy address:
ffff888022f56c00: fa fb fb fb fc fc fc fc 00 00 00 00 fc fc fc fc
ffff888022f56c80: 00 00 00 fc fc fc fc fc fa fb fb fb fc fc fc fc
>ffff888022f56d00: fa fb fb fb fc fc fc fc 00 00 00 00 fc fc fc fc
^
ffff888022f56d80: fa fb fb fb fc fc fc fc fa fb fb fb fc fc fc fc
ffff888022f56e00: 00 00 00 fc fc fc fc fc fa fb fb fb fc fc fc fc
==================================================================
Reply: **Bug Analysis:**
The bug is a Use-After-Free (UAF) in the ALSA OSS emulation layer, specifically in `snd_pcm_oss_look_for_setup()`.
**Root Cause:**
The vulnerability originates in `snd_pcm_oss_proc_write()`, which is the write handler for the `/proc/asound/cardX/pcmYp/oss` procfs file. When a user writes configuration data to this file, the kernel allocates a new `snd_pcm_oss_setup` object and links it into the `pstr->oss.setup_list` linked list.
After linking the object, the code attempts to duplicate the task name using `kstrdup()`. If this memory allocation fails (e.g., due to memory pressure or fault injection), the code frees the `setup` object using `kfree(setup)` but crucially **fails to remove it from the `setup_list`**.
This leaves a dangling pointer in the list. Later, when an application opens the OSS device (e.g., `/dev/dsp`), `snd_pcm_oss_look_for_setup()` traverses the `setup_list` and accesses the freed `setup` object, triggering the UAF.
**Security Impact Assessment:**
* **Exploitable / Denial of Service:** Yes. The bug is a classic Use-After-Free of a 32-byte slab object. Accessing the freed memory can lead to a kernel crash (Denial of Service). If an attacker can reliably reallocate the freed object with controlled data, they could manipulate the `setup->task_name` pointer to achieve an arbitrary read primitive during the `strcmp()` check, or control the OSS setup parameters copied out of the struct.
* **Accessible From Unprivileged Processes / User Namespaces:** **No.** The vulnerable code path can only be reached by writing to the `/proc/asound/cardX/pcmYp/oss` file. This procfs file is explicitly created with `0644` permissions (`S_IFREG | 0644`) and is owned by the global root (`GLOBAL_ROOT_UID`).
* An unprivileged user cannot write to this file due to standard DAC permissions.
* Even within a user namespace where an unprivileged user maps their UID to 0 and mounts a fresh `procfs`, the VFS `HAS_UNMAPPED_ID` check will block write access. The file remains owned by the host's root UID, which is unmapped in the user namespace, resulting in an `-EACCES` error.
* **Other Triggers (Network, Peripheral, VM, Filesystem):** No. The bug is strictly tied to a local user-space write operation to a specific procfs file. It cannot be triggered remotely, via malicious filesystems, or by simply plugging in a peripheral device (a user-space component would still need to write to the proc file).
**Conclusion:**
While this is a valid memory corruption bug (Use-After-Free), it strictly requires `root` privileges to trigger because it relies on writing to a root-owned procfs file. Since the attacker must already possess root access to exploit it, the bug does not cross any security boundaries and poses no risk of privilege escalation from an unprivileged context.
|
| 6/2 |
2026/06/01 17:40 |
llm |
expert |
0m
Model:
Tokens:
input: 9873
output: 40
thoughts: 131
Thoughts: **Analyzing a KASAN Slab-Use-After-Free Report**
Okay, so I've got a KASAN report, specifically a slab-use-after-free in `snd_pcm_oss_look_for_setup`. The crucial piece is that we're dealing with a read of 8 bytes at address `ffff888022f56d00`. This suggests data corruption or an invalid access. The KASAN report helpfully tells me the buggy address belongs to a 32-byte object. More importantly, task 10831 allocated and freed that object, while the actual crash occurred within task 10837. This is a classic race condition scenario, where one task frees memory and another attempts to access it before the memory manager has reclaimed it.
Time to dive into the code. I need to examine `snd_pcm_oss_look_for_setup`, which I know resides within `sound/core/oss/pcm_oss.c`. I'll start by checking line 2355 to understand the read access that triggered the KASAN report. I need to understand what data it's trying to access. The goal here is to identify exactly which pointers are being used and how they might be pointing to memory that's no longer valid. I'll be looking for possible locking issues, incorrect reference counting, or other memory management errors in the surrounding code. This will allow me to track the execution paths of task 10831 and task 10837 leading up to the crash.
|
| 7/2 |
2026/06/01 17:40 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:2340 LineCount:50]
Results: map[Contents:2340: ptrl = ptr + 1;
2341: }
2342: return ptrl;
2343: }
2344:
2345: static void snd_pcm_oss_look_for_setup(struct snd_pcm *pcm, int stream,
2346: const char *task_name,
2347: struct snd_pcm_oss_setup *rsetup)
2348: {
2349: struct snd_pcm_oss_setup *setup;
2350:
2351: guard(mutex)(&pcm->streams[stream].oss.setup_mutex);
2352: do {
2353: for (setup = pcm->streams[stream].oss.setup_list; setup;
2354: setup = setup->next) {
2355: if (!strcmp(setup->task_name, task_name))
2356: goto out;
2357: }
2358: } while ((task_name = strip_task_path(task_name)) != NULL);
2359: out:
2360: if (setup)
2361: *rsetup = *setup;
2362: }
2363:
2364: static void snd_pcm_oss_release_substream(struct snd_pcm_substream *substream)
2365: {
2366: snd_pcm_oss_release_buffers(substream);
2367: substream->oss.oss = 0;
2368: }
2369:
2370: static void snd_pcm_oss_init_substream(struct snd_pcm_substream *substream,
2371: struct snd_pcm_oss_setup *setup,
2372: int minor)
2373: {
2374: struct snd_pcm_runtime *runtime;
2375:
2376: substream->oss.oss = 1;
2377: substream->oss.setup = *setup;
2378: if (setup->nonblock)
2379: substream->f_flags |= O_NONBLOCK;
2380: else if (setup->block)
2381: substream->f_flags &= ~O_NONBLOCK;
2382: runtime = substream->runtime;
2383: runtime->oss.params = 1;
2384: runtime->oss.trigger = 1;
2385: runtime->oss.rate = 8000;
2386: mutex_init(&runtime->oss.params_lock);
2387: switch (SNDRV_MINOR_OSS_DEVICE(minor)) {
2388: case SNDRV_MINOR_OSS_PCM_8:
2389: runtime->oss.format = AFMT_U8;
]
|
| 8/2 |
2026/06/01 17:40 |
llm |
expert |
0m
Model:
Tokens:
input: 11160
output: 25
thoughts: 66
Thoughts: **Analyzing a Potential Use-After-Free Vulnerability**
Okay, the program just crashed, and from the debugger, it looks like the problem is right at that `if (!strcmp(setup->task_name, task_name))` line. Hmm, `setup` is a pointer to a `struct snd_pcm_oss_setup`, and the crash is happening on `setup->task_name`. That's pointing towards a classic Use-After-Free scenario, isn't it? The program is trying to use `task_name` after it has likely been freed. Alright, let's take a closer look at the definition of `struct snd_pcm_oss_setup` and see how this `task_name` member is being handled. I need to understand how it's allocated, deallocated, and used throughout the code to determine what's going on. I'll need to trace the allocation and deallocation to determine if there is a race condition or other issue.
|
| 9/2 |
2026/06/01 17:40 |
tool |
codesearch-struct-layout |
0m
Args: map[Name:snd_pcm_oss_setup]
Results: map[Fields:[map[Name:task_name OffsetBits:0 SizeBits:64] map[Name:disable OffsetBits:64 SizeBits:1] map[Name:direct OffsetBits:65 SizeBits:1] map[Name:block OffsetBits:66 SizeBits:1] map[Name:nonblock OffsetBits:67 SizeBits:1] map[Name:partialfrag OffsetBits:68 SizeBits:1] map[Name:nosilence OffsetBits:69 SizeBits:1] map[Name:buggyptr OffsetBits:70 SizeBits:1] map[Name:periods OffsetBits:96 SizeBits:32] map[Name:period_size OffsetBits:128 SizeBits:32] map[Name:next OffsetBits:192 SizeBits:64]]]
|
| 10/2 |
2026/06/01 17:40 |
llm |
expert |
0m
Model:
Tokens:
input: 11675
output: 42
thoughts: 49
Thoughts: Here's my analysis of the provided information, as if these were my internal thoughts:
**Dissecting Memory Operations and Structure Definitions**
Okay, so we're starting with `task_name` at offset 0. That's straightforward, but the crucial point is the read size of 8 bytes. Wait a minute... 8 bytes? That immediately flags a red flag. That size corresponds to a pointer on a 64-bit architecture, which strongly suggests that `task_name` isn't a simple string or character array, but rather a pointer to a string (or a pointer to some other data structure containing the task name). We need to verify that and, more importantly, *understand* the data layout. I need to go back and check the definition of the structure where `task_name` is declared. A quick review of the structure definition will clear this up and confirm my assumptions, or illuminate a different organization altogether. Knowing the structure will tell me about memory alignment, any possible padding, and the nature of the data `task_name` points to. This will also give me a better understanding of how the program is using that field, and by extension, this structure.
|
| 11/2 |
2026/06/01 17:40 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:sound/core/oss/pcm_oss.c Name:snd_pcm_oss_setup]
Results: map[SourceCode: 10: struct snd_pcm_oss_setup {
11: char *task_name;
12: unsigned int disable:1,
13: direct:1,
14: block:1,
15: nonblock:1,
16: partialfrag:1,
17: nosilence:1,
18: buggyptr:1;
19: unsigned int periods;
20: unsigned int period_size;
21: struct snd_pcm_oss_setup *next;
22: };
SourceFile:include/sound/pcm_oss.h]
|
| 12/2 |
2026/06/01 17:40 |
llm |
expert |
0m
Model:
Tokens:
input: 12205
output: 40
thoughts: 343
Thoughts: **Analyzing a Potential Use-After-Free Vulnerability**
Okay, so I'm looking at this issue related to `task_name`, which, as confirmed, is a `char *`. I've determined the vulnerable object, `snd_pcm_oss_setup`, is only 32 bytes in size. I've pinpointed the use-after-free (UAF) on this object specifically. It appears that task 10831 is responsible for both the allocation and freeing of this `snd_pcm_oss_setup` structure, which makes it easier to trace.
Now, I need to understand the lifecycle of this object and where things might be going wrong. Let's examine the stack traces to see where the allocation and deallocation occur.
The allocation seems to be happening within `snd_pcm_oss_proc_write` at `sound/core/oss/pcm_oss.c:3058`, traced back through `snd_info_text_entry_release` and then `close_pdeo.part.0` in `fs/proc/inode.c`. That's a classic allocation path.
The freeing is also occurring within `snd_pcm_oss_proc_write` at `sound/core/oss/pcm_oss.c:3072`, after `kfree` is called, and also traces to `snd_info_text_entry_release`. This looks like a deallocation happening in a well-defined sequence.
The crucial next step is to examine the code in `snd_pcm_oss_proc_write`, specifically in `sound/core/oss/pcm_oss.c`, and understand how the pointer is being used and freed within that function. I need to trace the usage after the freeing in order to spot the exact UAF vulnerability.
|
| 13/2 |
2026/06/01 17:41 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:3040 LineCount:50]
Results: map[Contents:3040: ptr = snd_info_get_str(str, ptr, sizeof(str));
3041: if (!strcmp(str, "disable")) {
3042: template.disable = 1;
3043: } else if (!strcmp(str, "direct")) {
3044: template.direct = 1;
3045: } else if (!strcmp(str, "block")) {
3046: template.block = 1;
3047: } else if (!strcmp(str, "non-block")) {
3048: template.nonblock = 1;
3049: } else if (!strcmp(str, "partial-frag")) {
3050: template.partialfrag = 1;
3051: } else if (!strcmp(str, "no-silence")) {
3052: template.nosilence = 1;
3053: } else if (!strcmp(str, "buggy-ptr")) {
3054: template.buggyptr = 1;
3055: }
3056: } while (*str);
3057: if (setup == NULL) {
3058: setup = kmalloc_obj(*setup);
3059: if (! setup) {
3060: buffer->error = -ENOMEM;
3061: return;
3062: }
3063: if (pstr->oss.setup_list == NULL)
3064: pstr->oss.setup_list = setup;
3065: else {
3066: for (setup1 = pstr->oss.setup_list;
3067: setup1->next; setup1 = setup1->next);
3068: setup1->next = setup;
3069: }
3070: template.task_name = kstrdup(task_name, GFP_KERNEL);
3071: if (! template.task_name) {
3072: kfree(setup);
3073: buffer->error = -ENOMEM;
3074: return;
3075: }
3076: }
3077: *setup = template;
3078: }
3079: }
3080:
3081: static void snd_pcm_oss_proc_init(struct snd_pcm *pcm)
3082: {
3083: int stream;
3084: for (stream = 0; stream < 2; ++stream) {
3085: struct snd_info_entry *entry;
3086: struct snd_pcm_str *pstr = &pcm->streams[stream];
3087: if (pstr->substream_count == 0)
3088: continue;
3089: entry = snd_info_create_card_entry(pcm->card, "oss", pstr->proc_root);
]
|
| 14/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 13763
output: 40
thoughts: 298
Thoughts: **Use-After-Free in OSS PCM Code**
Okay, so I'm looking at this snippet from `snd_pcm_oss_proc_write`, and something immediately jumps out. Specifically, the part where a new `setup` object is allocated and potentially added to a linked list `pstr->oss.setup_list`. The key issue is within the error handling. If `kstrdup` fails β which can happen, right? β it frees the newly allocated `setup` object. *However*, that `setup` object might already be part of the `pstr->oss.setup_list` linked list.
Wait a second⦠that's it! It *is* a linked list, so if `kstrdup` fails and frees the object, the object is still there in the linked list! This is a classic use-after-free vulnerability! The linked list now contains a pointer to freed memory. That's *definitely* not what we want. It's a textbook example of a dangling pointer.
Now, let's just confirm my hunch that the `setup_mutex` is *not* held during `snd_pcm_oss_proc_write`. That information is going to be important in determining how we tackle this problem, and the extent of the impact of the use-after-free vulnerability.
|
| 15/2 |
2026/06/01 17:41 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:2990 LineCount:50]
Results: map[Contents:2990: setup = setup->next;
2991: }
2992: }
2993:
2994: static void snd_pcm_oss_proc_free_setup_list(struct snd_pcm_str * pstr)
2995: {
2996: struct snd_pcm_oss_setup *setup, *setupn;
2997:
2998: for (setup = pstr->oss.setup_list, pstr->oss.setup_list = NULL;
2999: setup; setup = setupn) {
3000: setupn = setup->next;
3001: kfree(setup->task_name);
3002: kfree(setup);
3003: }
3004: pstr->oss.setup_list = NULL;
3005: }
3006:
3007: static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
3008: struct snd_info_buffer *buffer)
3009: {
3010: struct snd_pcm_str *pstr = entry->private_data;
3011: char line[128], str[32], task_name[32];
3012: const char *ptr;
3013: int idx1;
3014: struct snd_pcm_oss_setup *setup, *setup1, template;
3015:
3016: while (!snd_info_get_line(buffer, line, sizeof(line))) {
3017: guard(mutex)(&pstr->oss.setup_mutex);
3018: memset(&template, 0, sizeof(template));
3019: ptr = snd_info_get_str(task_name, line, sizeof(task_name));
3020: if (!strcmp(task_name, "clear") || !strcmp(task_name, "erase")) {
3021: snd_pcm_oss_proc_free_setup_list(pstr);
3022: continue;
3023: }
3024: for (setup = pstr->oss.setup_list; setup; setup = setup->next) {
3025: if (!strcmp(setup->task_name, task_name)) {
3026: template = *setup;
3027: break;
3028: }
3029: }
3030: ptr = snd_info_get_str(str, ptr, sizeof(str));
3031: template.periods = simple_strtoul(str, NULL, 10);
3032: ptr = snd_info_get_str(str, ptr, sizeof(str));
3033: template.period_size = simple_strtoul(str, NULL, 10);
3034: for (idx1 = 31; idx1 >= 0; idx1--)
3035: if (template.period_size & (1 << idx1))
3036: break;
3037: for (idx1--; idx1 >= 0; idx1--)
3038: template.period_size &= ~(1 << idx1);
3039: do {
]
|
| 16/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 15244
output: 27
thoughts: 220
Thoughts: **Analyzing a Potential Race Condition in the OSS Sound Driver**
Okay, so I've confirmed that `guard(mutex)(&pstr->oss.setup_mutex)` is indeed held during this process. This means I need to carefully examine what's happening within this guarded critical section. The crux of the issue appears to be centered around a flaw in how the OSS sound driver handles `/proc/asound/cardX/pcmYp/oss` writes.
Here's the breakdown, as I understand it:
1. `snd_pcm_oss_proc_write` is invoked when writing to this proc file. This is our entry point.
2. The code parses the input, which is reasonable. Then it goes on to create a new `setup` structure based on the parsed data.
3. This new `setup` is then linked into `pstr->oss.setup_list`. Seems standard for managing these structures.
4. The function then attempts to duplicate the task name using `kstrdup(task_name, GFP_KERNEL)`. This is where it gets interesting...
5. If `kstrdup` fails β which is a possibility given memory constraints, especially in a kernel environment β the code does a `kfree` on the `setup` structure. However, it *doesn't* unlink it from `pstr->oss.setup_list`. This is the potential memory-related pitfall.
6. The problem materializes when `snd_pcm_oss_look_for_setup` is later called. This function traverses `pstr->oss.setup_list`, and *accesses* the freed `setup` structure. This is a classic use-after-free scenario.
The concern now is, how can an unprivileged user trigger this? This is crucial for determining the potential severity of the bug. I need to check the access permissions of that proc file, `/proc/asound/cardX/pcmYp/oss`. Are we dealing with something that an attacker can easily manipulate?
|
| 17/2 |
2026/06/01 17:41 |
tool |
codesearch-find-references |
0m
Args: map[Name:snd_pcm_oss_proc_init]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:snd_pcm_oss_register_minor SourceFile:sound/core/oss/pcm_oss.c SourceLine:3177]] TruncatedOutput:false]
|
| 18/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 16002
output: 40
thoughts: 15
Thoughts: Okay, let's dive into this. Here's my take on `snd_pcm_oss_proc_init`:
**Diving into `snd_pcm_oss_proc_init`**
Alright, I'm taking a look at `snd_pcm_oss_proc_init`. Based on the name, it's pretty clear this is about initializing some aspect of the OSS (Open Sound System) support within the ALSA (Advanced Linux Sound Architecture) PCM (Pulse-Code Modulation) framework. My initial thought is it likely sets up some crucial internal structures and registers them within the proc filesystem for monitoring or control, if it's the `proc` initialization as suggested in the name. It could be mapping OSS device nodes to ALSA PCM streams, managing the interplay between the two sound systems, or maybe even implementing compatibility layers. Given the prevalence of OSS in legacy applications, a function like this would be critical for preserving backwards compatibility. I'll expect to see resource allocation, structure initialization, and the registration of file system entries. I'm curious about the specific data structures and the locking mechanisms implemented. This initialization process likely needs to be robust, to prevent race conditions and ensure stability when dealing with potentially non-ALSA-aware OSS clients. And of course, how it handles device identification and potential conflicts is something I'll be looking into as well.
|
| 19/2 |
2026/06/01 17:41 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:3081 LineCount:50]
Results: map[Contents:3081: static void snd_pcm_oss_proc_init(struct snd_pcm *pcm)
3082: {
3083: int stream;
3084: for (stream = 0; stream < 2; ++stream) {
3085: struct snd_info_entry *entry;
3086: struct snd_pcm_str *pstr = &pcm->streams[stream];
3087: if (pstr->substream_count == 0)
3088: continue;
3089: entry = snd_info_create_card_entry(pcm->card, "oss", pstr->proc_root);
3090: if (entry) {
3091: entry->content = SNDRV_INFO_CONTENT_TEXT;
3092: entry->mode = S_IFREG | 0644;
3093: entry->c.text.read = snd_pcm_oss_proc_read;
3094: entry->c.text.write = snd_pcm_oss_proc_write;
3095: entry->private_data = pstr;
3096: if (snd_info_register(entry) < 0) {
3097: snd_info_free_entry(entry);
3098: entry = NULL;
3099: }
3100: }
3101: pstr->oss.proc_entry = entry;
3102: }
3103: }
3104:
3105: static void snd_pcm_oss_proc_done(struct snd_pcm *pcm)
3106: {
3107: int stream;
3108: for (stream = 0; stream < 2; ++stream) {
3109: struct snd_pcm_str *pstr = &pcm->streams[stream];
3110: snd_info_free_entry(pstr->oss.proc_entry);
3111: pstr->oss.proc_entry = NULL;
3112: snd_pcm_oss_proc_free_setup_list(pstr);
3113: }
3114: }
3115: #else /* !CONFIG_SND_VERBOSE_PROCFS */
3116: static inline void snd_pcm_oss_proc_init(struct snd_pcm *pcm)
3117: {
3118: }
3119: static inline void snd_pcm_oss_proc_done(struct snd_pcm *pcm)
3120: {
3121: }
3122: #endif /* CONFIG_SND_VERBOSE_PROCFS */
3123:
3124: /*
3125: * ENTRY functions
3126: */
3127:
3128: static const struct file_operations snd_pcm_oss_f_reg =
3129: {
3130: .owner = THIS_MODULE,
]
|
| 20/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 17140
output: 44
thoughts: 78
Thoughts: Okay, here's my interpretation of those thoughts, considering my expertise:
**Checking the Permissions on that Proc File**
Right, so the system's creating this proc file, and I see it's setting `entry->mode` to `S_IFREG | 0644`. Hmm, `0644`. That's standard file mode stuff. Let me translate that quickly: Owner (which I assume is root in this case, given procfs conventions) gets read and *write* access. The group and others? They only get read.
So, if that's correct, only root is going to be able to modify this thing. Interesting. I need to make sure I am thinking about that right, and not making assumptions, I will take a quick peek to confirm that `snd_info_create_card_entry` sets that mode and that my assumption on the owner is correct. Need to be certain that the file ownership isn't being explicitly set to something else further down the line. I always need to keep an eye out for potential privilege escalation issues. I'll need to remember that when I go to work with this again.
|
| 21/2 |
2026/06/01 17:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:sound/core/oss/pcm_oss.c Name:snd_info_create_card_entry]
Results: map[SourceCode: 708: /**
709: * snd_info_create_card_entry - create an info entry for the given card
710: * @card: the card instance
711: * @name: the file name
712: * @parent: the parent directory
713: *
714: * Creates a new info entry and assigns it to the given card.
715: *
716: * Return: The pointer of the new instance, or %NULL on failure.
717: */
718: struct snd_info_entry *snd_info_create_card_entry(struct snd_card *card,
719: const char *name,
720: struct snd_info_entry * parent)
721: {
722: if (!parent)
723: parent = card->proc_root;
724: return snd_info_create_entry(name, parent, card->module);
725: }
SourceFile:sound/core/info.c]
|
| 22/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 17808
output: 38
thoughts: 10
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**My Deep Dive into `snd_info_create_entry`**
Alright, so I'm looking at `snd_info_create_entry` here, and my mind immediately starts dissecting its implications within the ALSA framework. This function is fundamental; it's the gateway for populating the information structures that get presented to the user through the ALSA control interface, right? I'm thinking about the memory management immediately - who's responsible for freeing what? Is it the calling context, or does this function allocate and manage its own memory? I need to quickly determine whether I need to track the return of a pointer to be freed at a later time.
I start running through possible scenarios in my head. What types of entries can be created? Is it just for basic things like device names and capabilities, or does it handle more complex data structures? I need to consider how it interacts with the rest of the ALSA infrastructure β does it tie into the card-specific data or the global information? I'm picturing the `snd_info_entry` struct in my head now, and Iβm making sure it's the right type for the information I want to present.
The error handling is also key. What happens if memory allocation fails? What if the specified entry name is invalid or already in use? Iβm scrutinizing the potential return values and thinking about how to propagate those errors back up the call stack gracefully. This will need proper error logging at the very least.
Furthermore, how does this function relate to the `snd_info_get_entry` or `snd_info_open` functions? Is it designed to be paired with other ALSA calls in a specific sequence? I'm trying to anticipate potential race conditions or locking issues that could arise when multiple threads are creating and accessing information entries concurrently. I want to make sure the process is thread-safe or has an inherent mechanism to handle concurrent calls. It's a key function in a critical area, so I need to check how it deals with this.
|
| 23/2 |
2026/06/01 17:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:sound/core/info.c Name:snd_info_create_entry]
Results: map[SourceCode: 648: /*
649: * snd_info_create_entry - create an info entry
650: * @name: the proc file name
651: * @parent: the parent directory
652: *
653: * Creates an info entry with the given file name and initializes as
654: * the default state.
655: *
656: * Usually called from other functions such as
657: * snd_info_create_card_entry().
658: *
659: * Return: The pointer of the new instance, or %NULL on failure.
660: */
661: static struct snd_info_entry *
662: snd_info_create_entry(const char *name, struct snd_info_entry *parent,
663: struct module *module)
664: {
665: struct snd_info_entry *entry;
666: entry = kzalloc_obj(*entry);
667: if (entry == NULL)
668: return NULL;
669: entry->name = kstrdup(name, GFP_KERNEL);
670: if (entry->name == NULL) {
671: kfree(entry);
672: return NULL;
673: }
674: entry->mode = S_IFREG | 0444;
675: entry->content = SNDRV_INFO_CONTENT_TEXT;
676: mutex_init(&entry->access);
677: INIT_LIST_HEAD(&entry->children);
678: INIT_LIST_HEAD(&entry->list);
679: entry->parent = parent;
680: entry->module = module;
681: if (parent) {
682: guard(mutex)(&parent->access);
683: list_add_tail(&entry->list, &parent->children);
684: }
685: return entry;
686: }
SourceFile:sound/core/info.c]
|
| 24/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 18893
output: 36
thoughts: 82
Thoughts: **Analyzing OSS PCM Device Permissions**
Okay, hold on a second. I'm looking at this `snd_pcm_oss_proc_init` function, and it's *explicitly* setting `entry->mode` to `S_IFREG | 0644`. That means any file created for the OSS PCM interface, which is what we're talking about here, is being created with 0644 permissions. That's read/write for the owner and read-only for group and others. Since the kernel is creating these, I can pretty much guarantee the owner is root. That implies only the root user will be able to *write* to these things. Which also means a standard user trying to interact with it won't be able to. It looks like things are behaving as I expect, with this level of permissions.
But I need to confirm that root ownership. I should cross-reference this with the `snd_info_register` call. That should tell me definitively who owns this device. Let me check that quickly...
|
| 25/2 |
2026/06/01 17:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:sound/core/info.c Name:snd_info_register]
Results: map[SourceCode: 803: /**
804: * snd_info_register - register the info entry
805: * @entry: the info entry
806: *
807: * Registers the proc info entry.
808: * The all children entries are registered recursively.
809: *
810: * Return: Zero if successful, or a negative error code on failure.
811: */
812: int snd_info_register(struct snd_info_entry *entry)
813: {
814: struct snd_info_entry *p;
815: int err;
816:
817: if (!entry->p) {
818: err = __snd_info_register(entry);
819: if (err < 0)
820: return err;
821: }
822:
823: list_for_each_entry(p, &entry->children, list) {
824: err = snd_info_register(p);
825: if (err < 0)
826: return err;
827: }
828:
829: return 0;
830: }
SourceFile:sound/core/info.c]
|
| 26/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 19615
output: 37
thoughts: 9
Thoughts: Okay, here's my summary, in the first person, as an expert in the field would perceive the thought process:
**Diving into `__snd_info_register`**
Alright, let's unpack this. We're looking at `__snd_info_register`. Instantly, my mind jumps to the core of ALSA's information/control API. This is where we're handling the registration of a *new* element, probably a custom one, within the system's information space. Think of it as opening the door for a new data stream, a new control point, or a new way to interact with the sound system. It signals the kernel module is ready to offer its data.
I'm considering the implications β what's being *registered*? Is it a hardware abstraction, a software-based control, maybe some kind of virtual device? The function itself is the heart of the interaction. I need to look closer at its parameters. What data structures are we feeding into this? What metadata is essential?
I'm immediately running through the likely structures: there's probably a handle or context for the device, and some sort of descriptor that describes the registration itself. Key fields I'm expecting include:
* **Identifier:** How is this unique instance being labeled within the system? Is it a string, an integer or some composite key?
* **Data handler functions:** The actual callback functions that will serve requests for the registered data. What operations can be performed. Read, write, or both? Are we going to see a `get_info` type function.
* **Security Context:** This registration may be a place that needs to be controlled and is a place that needs to be restricted, if it is to succeed.
* **Lifespan:** Does the data source have a start/end date? Can it be removed from the system?
It's about making this information accessible to user space utilities like `alsamixer`, `amixer`, or any custom application. The core of this mechanism must provide efficient and secure access to the newly registered data. I'm wondering if there are any associated locking mechanisms involved, to ensure thread safety and prevent data corruption during concurrent access. That's a critical consideration in any kernel-level data structure registration.
In conclusion, I see this as a critical piece of the ALSA puzzle. It's the mechanism that brings new functionality to life, making it usable by the rest of the sound system and, ultimately, the user. It is the lifeblood of expansion within ALSA.
|
| 27/2 |
2026/06/01 17:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:sound/core/info.c Name:__snd_info_register]
Results: map[SourceCode: 773: static int __snd_info_register(struct snd_info_entry *entry)
774: {
775: struct proc_dir_entry *root, *p = NULL;
776:
777: if (snd_BUG_ON(!entry))
778: return -ENXIO;
779: root = entry->parent == NULL ? snd_proc_root->p : entry->parent->p;
780: guard(mutex)(&info_mutex);
781: if (entry->p || !root)
782: return 0;
783: if (S_ISDIR(entry->mode)) {
784: p = proc_mkdir_mode(entry->name, entry->mode, root);
785: if (!p)
786: return -ENOMEM;
787: } else {
788: const struct proc_ops *ops;
789: if (entry->content == SNDRV_INFO_CONTENT_DATA)
790: ops = &snd_info_entry_operations;
791: else
792: ops = &snd_info_text_entry_ops;
793: p = proc_create_data(entry->name, entry->mode, root,
794: ops, entry);
795: if (!p)
796: return -ENOMEM;
797: proc_set_size(p, entry->size);
798: }
799: entry->p = p;
800: return 0;
801: }
SourceFile:sound/core/info.c]
|
| 28/2 |
2026/06/01 17:41 |
llm |
expert |
0m
Model:
Tokens:
input: 20675
output: 66
thoughts: 425
Thoughts: **Analyzing Procfs File Permissions and User Namespaces**
Okay, so I'm thinking through how file permissions work with `procfs` files, especially considering user namespaces. Let's break it down. When `proc_create_data` creates a file in `/proc`, it's initially owned by `root:root`, with permissions of `0644`. That means, in the standard scenario, only root can write to it. I'm focusing on whether an unprivileged user can write to such a file *within* a user namespace.
The key is that `proc_set_user` isn't used here, so there's no alteration to the ownership. My initial assumption that a user mapping root within a namespace to their own UID would grant write access is incorrect. Procfs files are ultimately owned by the "global root," which is UID 0 in the initial user namespace (`init_user_ns`).
Now, what about if the user *mounts* their own procfs within the user namespace? That might be the differentiator. But wait, files like `/proc/asound` are part of the *global* procfs. Hmm, so creating a new namespace and mounting procfs doesn't change the underlying ownership either. Procfs files remain owned by the global root. And if the global root is not mapped into the user namespace, the file will show as `nobody` or `overflowuid`. If it *is* mapped, it shows the mapped UID.
The core mechanism appears to be the use of `GLOBAL_ROOT_UID` for ownership, unless specified otherwise. So, the question is: can an unprivileged user write to something like `/proc/asound/cardX/pcmYp/oss` inside the user namespace? I'm betting not.
Let's assume I'm inside a user namespace and I mount procfs. The files are still owned by `GLOBAL_ROOT_UID`. Even if I map my own UID to 0 *within* the user namespace (effectively becoming "root" in that context), it's irrelevant. The file's ownership still belongs to the `GLOBAL_ROOT_UID`, which is UID 0 in the *init* namespace. So, I don't have write access because my UID within the user namespace isn't the same as the file's owner in the global namespace. I need to confirm this practically, to be sure.
|
| 29/2 |
2026/06/01 17:41 |
tool |
codeexpert |
5m
Args: map[Question:Can an unprivileged user in a user namespace write to a procfs file created with `proc_create_data` and mode 0644? Assume the user maps their uid to 0 in the user namespace and mounts a new procfs.]
Results: map[Answer:An unprivileged user in a user namespace **cannot** write to a global `procfs` file created with `proc_create_data` and mode `0644`, even if they map their UID to 0 in that namespace and mount a new `procfs` instance.
### Reasons for Denial
1. **Ownership and DAC Permissions**:
Files created with `proc_create_data` inherit the UID and GID of their parent directory. For files in the root of `/proc`, the parent is `proc_root`, which is owned by `GLOBAL_ROOT_UID` (host UID 0). An unprivileged user (e.g., host UID 1000) mapping their own UID to 0 in a user namespace does not become the owner of files owned by host UID 0. Since the mode is `0644`, only the owner has write permissions; "others" (including the unprivileged user) only have read permissions.
2. **Unmapped UID Check (`HAS_UNMAPPED_ID`)**:
When a user mounts a new `procfs` instance within a user namespace, the new filesystem's `super_block` is owned by that user namespace (`s_user_ns`). The VFS performs a specific check in `inode_permission()` (located in `fs/namei.c`):
```c
if (mask & MAY_WRITE) {
if (unlikely(HAS_UNMAPPED_ID(idmap, inode)))
return -EACCES;
}
```
If the inode's UID (host UID 0) is not mapped in the mount's user namespace, `HAS_UNMAPPED_ID` returns true, and write access is denied with `-EACCES`. Since an unprivileged user cannot map host UID 0 into their user namespace, all global `procfs` files will have unmapped UIDs from the perspective of the new mount.
3. **Capabilities**:
While the user has `CAP_DAC_OVERRIDE` within their own user namespace, this capability only allows bypassing permission checks for files whose UIDs are mapped into that namespace. It does not grant permissions over files owned by UIDs outside the namespace (like host UID 0).
### Exceptions: Namespaced Proc Entries
The only case where an unprivileged user could write to a file created with `proc_create_data` is if the file is part of a **namespaced** hierarchy that the user owns. For example:
* Files under **`/proc/net/`**: If the user creates a new network namespace while in their user namespace, the `/proc/net` directory for that namespace will be owned by the user (their host UID).
* Any file created under such a directory using `proc_create_data` will inherit the user's UID as the owner. If such a file has mode `0644` and a valid write handler in its `proc_ops`, the user **can** write to it.
However, for standard global files (like `/proc/sysrq-trigger` or most driver-provided entries in `/proc`), the answer is **No**.]
|
| 30/3 |
2026/06/01 17:41 |
agent |
codeexpert |
5m
Model:
Instruction:
You are a capable Linux kernel developer tasked with researching complex questions
about kernel source code. You will be given a concrete question, and need to provide
a concrete answer.
Use tools extensively while researching the question. Don't make assumptions,
or rely on your previous knowledge about the kernel source code, use available tools
to access the actual source code.
Use all available sources of information:
- kernel source code
- documentation in the Documentation dir in the source tree
- git commits descriptions, git blame
Prefer calling several tools at the same time to save round-trips.
Prompt: Can an unprivileged user in a user namespace write to a procfs file created with `proc_create_data` and mode 0644? Assume the user maps their uid to 0 in the user namespace and mounts a new procfs.
Reply: An unprivileged user in a user namespace **cannot** write to a global `procfs` file created with `proc_create_data` and mode `0644`, even if they map their UID to 0 in that namespace and mount a new `procfs` instance.
### Reasons for Denial
1. **Ownership and DAC Permissions**:
Files created with `proc_create_data` inherit the UID and GID of their parent directory. For files in the root of `/proc`, the parent is `proc_root`, which is owned by `GLOBAL_ROOT_UID` (host UID 0). An unprivileged user (e.g., host UID 1000) mapping their own UID to 0 in a user namespace does not become the owner of files owned by host UID 0. Since the mode is `0644`, only the owner has write permissions; "others" (including the unprivileged user) only have read permissions.
2. **Unmapped UID Check (`HAS_UNMAPPED_ID`)**:
When a user mounts a new `procfs` instance within a user namespace, the new filesystem's `super_block` is owned by that user namespace (`s_user_ns`). The VFS performs a specific check in `inode_permission()` (located in `fs/namei.c`):
```c
if (mask & MAY_WRITE) {
if (unlikely(HAS_UNMAPPED_ID(idmap, inode)))
return -EACCES;
}
```
If the inode's UID (host UID 0) is not mapped in the mount's user namespace, `HAS_UNMAPPED_ID` returns true, and write access is denied with `-EACCES`. Since an unprivileged user cannot map host UID 0 into their user namespace, all global `procfs` files will have unmapped UIDs from the perspective of the new mount.
3. **Capabilities**:
While the user has `CAP_DAC_OVERRIDE` within their own user namespace, this capability only allows bypassing permission checks for files whose UIDs are mapped into that namespace. It does not grant permissions over files owned by UIDs outside the namespace (like host UID 0).
### Exceptions: Namespaced Proc Entries
The only case where an unprivileged user could write to a file created with `proc_create_data` is if the file is part of a **namespaced** hierarchy that the user owns. For example:
* Files under **`/proc/net/`**: If the user creates a new network namespace while in their user namespace, the `/proc/net` directory for that namespace will be owned by the user (their host UID).
* Any file created under such a directory using `proc_create_data` will inherit the user's UID as the owner. If such a file has mode `0644` and a valid write handler in its `proc_ops`, the user **can** write to it.
However, for standard global files (like `/proc/sysrq-trigger` or most driver-provided entries in `/proc`), the answer is **No**.
|
| 31/4 |
2026/06/01 17:41 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 3322
output: 36
thoughts: 193
Thoughts: **Investigating `procfs` Permissions in User Namespaces**
Okay, so the question before me is whether an unprivileged user, operating within a user namespace and with their UID mapped to 0, can write to a `procfs` file created with `proc_create_data` and a mode of `0644`. This is a tricky one. I need to really dig into how `procfs` manages permissions, particularly when you throw user namespaces into the mix.
First things first, `proc_create_data` is how the kernel creates the entry in `procfs`. The mode `0644` is the standard UNIX way of saying the owner gets read/write, the group gets read, and others get read-only access. Straightforward. But, within a user namespace, things get messy, right?
The crux of the problem is this: if a user in a namespace maps their UID to 0, they *effectively* become "root" within that isolated environment. That's the whole point of user namespaces β isolation and reduced privileges. Now, with this user-namespaced "root" mounting a *new* `procfs`, how does the kernel determine the ownership of the files created? Does the mapped UID of 0 translate directly to the effective UID of the file within the kernel's view? Is the ownership context within the namespace respected? Or does it revert to some global context?
My immediate next step is to examine how `proc_create_data` itself works. I need to understand how it sets up the underlying `proc_dir_entry` data structure. That's where I expect to find the crucial information regarding the setting of the file's owner and group IDs, and how that interacts with the user namespace's identity mapping. I need to see how the kernel handles the transition between the namespace's "root" and the file's actual identity. This should lead me to the answer to my question.
|
| 32/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_create_data]
Results: map[SourceCode: 586: struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
587: struct proc_dir_entry *parent,
588: const struct proc_ops *proc_ops, void *data)
589: {
590: struct proc_dir_entry *p;
591:
592: p = proc_create_reg(name, mode, &parent, data);
593: if (!p)
594: return NULL;
595: p->proc_ops = proc_ops;
596: return proc_register(parent, p);
597: }
SourceFile:fs/proc/generic.c]
|
| 33/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 4178
output: 36
thoughts: 27
Thoughts: Here's a summary of my thought process:
**Diving into the Procedure Creation Process**
Okay, so I see that `proc_create_data` ultimately leans on `proc_create_reg`. That makes sense; it's likely a lower-level function building the foundational pieces. Since I'm familiar with this architecture, it's immediately clear that I should delve into the mechanics of `proc_create_reg`. Understanding how that core function operates will likely illuminate the data structures and steps involved in registering a process entry. I need to focus on how it handles memory allocation, permission settings, and linking within the process table. That's the key here.
|
| 34/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_create_reg]
Results: map[SourceCode: 566: struct proc_dir_entry *proc_create_reg(const char *name, umode_t mode,
567: struct proc_dir_entry **parent, void *data)
568: {
569: struct proc_dir_entry *p;
570:
571: if ((mode & S_IFMT) == 0)
572: mode |= S_IFREG;
573: if ((mode & S_IALLUGO) == 0)
574: mode |= S_IRUGO;
575: if (WARN_ON_ONCE(!S_ISREG(mode)))
576: return NULL;
577:
578: p = __proc_create(parent, name, mode, 1);
579: if (p) {
580: p->proc_iops = &proc_file_inode_operations;
581: p->data = data;
582: }
583: return p;
584: }
SourceFile:fs/proc/generic.c]
|
| 35/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 4702
output: 35
thoughts: 7
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**My Deep Dive into `__proc_create`**
Right, so I'm thinking about `__proc_create` again. Itβs always been fascinating, the core of how we bring new process filesystems into existence within the kernel. It's not just about creating a directory entry, that's just the tip of the iceberg. I'm focusing on the *essence* of the call. Itβs about more than the directory.
At its heart, I see this call as orchestrating the registration of a new filesystem node within the proc filesystem tree. And this is vital. I mean, the whole point of proc is, it's a virtual filesystem, mirroring process and kernel data in a file-like form, enabling userspace access. `__proc_create` sets up the interface through which userspace interacts.
So, the key here is how `__proc_create` manages that interaction. We're talking about linking data structures, the dentry, the inode, maybe a custom file_operations structure, which makes it all work. I'm focusing on those specific pieces of setup that make it all work. Setting up the file operations to handle reads, writes, and all the rest.
I'm probably going to be analyzing the call to understand any possible race conditions or memory allocation issues that might arise during its function. I may even check the function to see how it might be adapted. It's a key part of the kernel, and understanding its nuances is essential for anyone who's serious about kernel development.
|
| 36/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:__proc_create]
Results: map[SourceCode: 418: static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
419: const char *name,
420: umode_t mode,
421: nlink_t nlink)
422: {
423: struct proc_dir_entry *ent = NULL;
424: const char *fn;
425: struct qstr qstr;
426:
427: if (xlate_proc_name(name, parent, &fn) != 0)
428: goto out;
429: qstr.name = fn;
430: qstr.len = strlen(fn);
431: if (qstr.len == 0 || qstr.len >= 256) {
432: WARN(1, "name len %u\n", qstr.len);
433: return NULL;
434: }
435: if (qstr.len == 1 && fn[0] == '.') {
436: WARN(1, "name '.'\n");
437: return NULL;
438: }
439: if (qstr.len == 2 && fn[0] == '.' && fn[1] == '.') {
440: WARN(1, "name '..'\n");
441: return NULL;
442: }
443: if (*parent == &proc_root && name_to_int(&qstr) != ~0U) {
444: WARN(1, "create '/proc/%s' by hand\n", qstr.name);
445: return NULL;
446: }
447: if (is_empty_pde(*parent)) {
448: WARN(1, "attempt to add to permanently empty directory");
449: return NULL;
450: }
451:
452: ent = kmem_cache_zalloc(proc_dir_entry_cache, GFP_KERNEL);
453: if (!ent)
454: goto out;
455:
456: if (qstr.len + 1 <= SIZEOF_PDE_INLINE_NAME) {
457: ent->name = ent->inline_name;
458: } else {
459: ent->name = kmalloc(qstr.len + 1, GFP_KERNEL);
460: if (!ent->name) {
461: pde_free(ent);
462: return NULL;
463: }
464: }
465:
466: memcpy(ent->name, fn, qstr.len + 1);
467: ent->namelen = qstr.len;
468: ent->mode = mode;
469: ent->nlink = nlink;
470: ent->subdir = RB_ROOT;
471: refcount_set(&ent->refcnt, 1);
472: spin_lock_init(&ent->pde_unload_lock);
473: INIT_LIST_HEAD(&ent->pde_openers);
474: proc_set_user(ent, (*parent)->uid, (*parent)->gid);
475:
476: /* Revalidate everything under /proc/${pid}/net */
477: if ((*parent)->flags & PROC_ENTRY_FORCE_LOOKUP)
478: pde_force_lookup(ent);
479:
480: out:
481: return ent;
482: }
SourceFile:fs/proc/generic.c]
|
| 37/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 6126
output: 36
thoughts: 45
Thoughts: Here's my summary, as if I were thinking it:
**Digging into Process User Context in `proc_create`**
Alright, let's break this down. Line 474 in `__proc_create`β¦ right, that's where the user context gets set for the new proc entry. Specifically, `proc_set_user(ent, (*parent)->uid, (*parent)->gid);`. Seems pretty straightforward, but I want to make sure I understand it completely. So, the key function here is `proc_set_user`, and I'll need to go deeper into it. I need to refresh my understanding of how user ID and group ID are inherited, and how that impacts permissions within the proc filesystem. It's likely involved with managing permissions and access control. Time to check its implementation, and how it is employed across the system. This seems like it's core to security and resource isolation within the process tree, especially with the parent's `uid` and `gid` being so central.
|
| 38/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_set_user]
Results: map[SourceCode: 686: void proc_set_user(struct proc_dir_entry *de, kuid_t uid, kgid_t gid)
687: {
688: de->uid = uid;
689: de->gid = gid;
690: }
SourceFile:fs/proc/generic.c]
|
| 39/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 6531
output: 34
thoughts: 65
Thoughts: Here's my take on the thought process:
**Diving into Procfs UID/GID Inheritance**
Alright, let's break down how permissions work within procfs. It looks like the `proc_dir_entry` (PDE) inherits the User ID (UID) and Group ID (GID) from its parent directory. That makes sense, keeps things consistent. So, where does this inheritance chain originate? It has to start with the top-level entries, and those are, naturally, children of `proc_root`. Now, I need to understand how *that* gets initialized to fully grasp the security context. My guess is the `proc_root` initialization code is going to be tucked away in `fs/proc/root.c`. Time to crack open that file and see what's going on...
|
| 40/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_root]
Results: map[SourceCode: 442: /*
443: * This is the root "inode" in the /proc tree..
444: */
445: struct proc_dir_entry proc_root = {
446: .low_ino = PROCFS_ROOT_INO,
447: .namelen = 5,
448: .mode = S_IFDIR | S_IRUGO | S_IXUGO,
449: .nlink = 2,
450: .refcnt = REFCOUNT_INIT(1),
451: .proc_iops = &proc_root_inode_operations,
452: .proc_dir_ops = &proc_root_operations,
453: .parent = &proc_root,
454: .subdir = RB_ROOT,
455: .name = "/proc",
456: };
SourceFile:fs/proc/root.c]
|
| 41/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 7082
output: 36
thoughts: 134
Thoughts: **Analyzing the User Namespace Procfs Inode Creation**
Okay, so I'm thinking about how user namespaces interact with `/proc`. I was just reviewing the code and realized something β `proc_root` doesn't explicitly set the user ID (UID) and group ID (GID). That means, as a global variable, the default will be 0, which corresponds to `GLOBAL_ROOT_UID` and `GLOBAL_ROOT_GID`. Interesting.
Now, when a user mounts a new `procfs` within their user namespace, how are the inodes actually created? The entire thing is virtual, right? I'm picturing this: we access a file or directory within `/proc`, and that's when the kernel dynamically generates an inode from the associated `proc_dir_entry`.
I need to dig into the initialization process of these `/proc` inodes. Let me see... `proc_get_inode` seems like the most relevant function to investigate. It's likely responsible for the inode creation and population of attributes. I need to understand how the UID/GID are handled within *that* process, especially when considering user namespaces and potentially shifted IDs. I'm hoping I can uncover the logic that determines the effective credentials for the created inodes.
|
| 42/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/inode.c Name:proc_get_inode]
Results: map[SourceCode: 628: struct inode *proc_get_inode(struct super_block *sb, struct proc_dir_entry *de)
629: {
630: struct inode *inode = new_inode(sb);
631:
632: if (!inode) {
633: pde_put(de);
634: return NULL;
635: }
636:
637: inode->i_private = de->data;
638: inode->i_ino = de->low_ino;
639: simple_inode_init_ts(inode);
640: PROC_I(inode)->pde = de;
641: if (is_empty_pde(de)) {
642: make_empty_dir_inode(inode);
643: return inode;
644: }
645:
646: if (de->mode) {
647: inode->i_mode = de->mode;
648: inode->i_uid = de->uid;
649: inode->i_gid = de->gid;
650: }
651: if (de->size)
652: inode->i_size = de->size;
653: if (de->nlink)
654: set_nlink(inode, de->nlink);
655:
656: if (S_ISREG(inode->i_mode)) {
657: inode->i_op = de->proc_iops;
658: if (pde_has_proc_read_iter(de))
659: inode->i_fop = &proc_iter_file_ops;
660: else
661: inode->i_fop = &proc_reg_file_ops;
662: #ifdef CONFIG_COMPAT
663: if (pde_has_proc_compat_ioctl(de)) {
664: if (pde_has_proc_read_iter(de))
665: inode->i_fop = &proc_iter_file_ops_compat;
666: else
667: inode->i_fop = &proc_reg_file_ops_compat;
668: }
669: #endif
670: } else if (S_ISDIR(inode->i_mode)) {
671: inode->i_op = de->proc_iops;
672: inode->i_fop = de->proc_dir_ops;
673: } else if (S_ISLNK(inode->i_mode)) {
674: inode->i_op = de->proc_iops;
675: inode->i_fop = NULL;
676: } else {
677: BUG();
678: }
679: return inode;
680: }
SourceFile:fs/proc/inode.c]
|
| 43/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 8356
output: 34
thoughts: 235
Thoughts: **Analyzing Procfs UID/GID Assignment**
Okay, so I'm looking at `proc_get_inode` and it's pretty straightforward: lines 648 and 649 are setting the inode's UID and GID from the `proc_dir_entry`. Right, and we know that `de->uid` and `de->gid` usually default to `GLOBAL_ROOT_UID` and `GLOBAL_ROOT_GID`, which is typically 0. This is the starting point.
But the real question is what happens in the context of user namespaces. The prompt mentions a user *mounting* `procfs` within a namespace. My initial thought is the `super_block` associated with that mount is key. Now, a thought, is `/proc` a per-user-namespace filesystem? Mostly, it's global, isn't it? But, there are namespaced parts like `/proc/net`, right? I need to be precise here. The prompt is specifically talking about a *new* `procfs` mount, so presumably they're doing `mount -t proc proc /proc` (or something similar).
Alright, I need to see exactly how `proc_mount` works. What `super_block` does it create? What context does it use? That's where the answer lies. This'll tell me if the UID/GID assignment, when they mount a new `/proc` is subject to the user namespace's UID/GID remapping, or remains global, or something in between. Time to dive into the `proc_mount` function.
|
| 44/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Error:
Args: map[ContextFile:fs/proc/root.c Name:proc_mount]
Results: map[SourceCode: SourceFile:]
|
| 45/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 8988
output: 36
thoughts: 23
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Investigating a Potential Mount API Integration**
Hmm, this feels like it's leveraging the recently implemented mount API. I should start by verifying that hunch. My first instinct is to check for the presence of `proc_fs_type`. That's a strong indicator. It's a key element in how we now interact with file systems and their properties from a low level perspective, isn't it? Let's trace how that's being used within the context of this system's mount operations. This is where I'll get the initial clarity I need.
|
| 46/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_fs_type]
Results: map[SourceCode: 357: static struct file_system_type proc_fs_type = {
358: .name = "proc",
359: .init_fs_context = proc_init_fs_context,
360: .parameters = proc_fs_parameters,
361: .kill_sb = proc_kill_sb,
362: .fs_flags = FS_USERNS_MOUNT | FS_DISALLOW_NOTIFY_PERM,
363: };
SourceFile:fs/proc/root.c]
|
| 47/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 9349
output: 38
thoughts: 37
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Analyzing the Filesystem Context**
Alright, so this filesystem has the `FS_USERNS_MOUNT` flag set. That immediately tells me it's designed to be mounted within a user namespace. This is interesting β it implies some level of isolation and potential sandboxing capabilities. I'm going to dig into the initialization process. Let's start by examining `proc_init_fs_context`. Understanding how this context is initially set up is crucial. Knowing that function, I can infer a lot about how the filesystem interacts with user namespaces and what implications this has for security and resource management. I'm expecting to find the key mechanisms for handling user IDs and group IDs within this context.
|
| 48/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_init_fs_context]
Results: map[SourceCode: 330: static int proc_init_fs_context(struct fs_context *fc)
331: {
332: struct proc_fs_context *ctx;
333:
334: ctx = kzalloc_obj(struct proc_fs_context);
335: if (!ctx)
336: return -ENOMEM;
337:
338: ctx->pid_ns = get_pid_ns(task_active_pid_ns(current));
339: put_user_ns(fc->user_ns);
340: fc->user_ns = get_user_ns(ctx->pid_ns->user_ns);
341: fc->fs_private = ctx;
342: fc->ops = &proc_fs_context_ops;
343: return 0;
344: }
SourceFile:fs/proc/root.c]
|
| 49/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 9861
output: 33
thoughts: 1357
Thoughts: **Understanding `procfs` Permissions in User Namespaces**
Okay, let's break this down systematically. I'm thinking about how user namespaces interact with `procfs` and file permissions. The core issue is ownership and capability inheritance across nested namespaces.
First, I need to remember the basics. The user namespace of the mount, in this case `procfs`, is the same as the user namespace of the PID namespace. That means when a user maps their UID to 0 in a user namespace, they are indeed root *within that specific* namespace. Now, they mount `procfs`, and the inodes will have `i_uid = GLOBAL_ROOT_UID` (0). So far, so good.
Now the question is, if the user is `root` in the user namespace, and the file is owned by `root` (UID 0), can they write to it, even with a mode of `0644` (owner rw, group r, others r)? That's where it gets interesting, because `GLOBAL_ROOT_UID` is UID 0 in the *initial* namespace. The user, now in a child user namespace, might map their UID (e.g., 1000) to 0. It means that UID 0 in the new user namespace will correspond to `GLOBAL_ROOT_UID` *only if it's explicitly mapped*. And an unprivileged user cannot map just any UID to anything. If I am UID 1000 and create a user namespace and map 0 to 1000: `0 1000 1` in `/proc/self/uid_map`. Then inside the namespace, my UID is 0.
So, if I map my UID 1000 to 0 in my user namespace, `GLOBAL_ROOT_UID` will be unmapped. In fact it's usually shown as `overflowuid` (65534).
And then I look at `proc_set_user`, where the uid is 0 in default cases.
The crux is, if they map their UID to 0, they *are* UID 0 in their namespace, but the file's `i_uid` is *still* `GLOBAL_ROOT_UID`. If `GLOBAL_ROOT_UID` is NOT mapped to 0 in that namespace, they are *not* the owner. An unprivileged user can't map just any UID to 0, only UIDs they have authority over (typically, just their own). So, in this scenario, where they map UID 1000 (host) to 0 (userns), `GLOBAL_ROOT_UID` (0) is NOT 0 in the user namespace; it's unmapped. In their namespace, UID 0 (host) is unmapped and appears as `overflowuid`, and the user is UID 0 (userns), which is UID 1000 (host).
So, they are NOT the owner. File mode `0644` grants only read permission since they aren't the owner or in the group.
But wait a minute! Does `procfs` do something special with permissions? Does it use `CAP_DAC_OVERRIDE`? Because, remember, in their user namespace, they *do* have all capabilities, including `CAP_DAC_OVERRIDE`. But does `CAP_DAC_OVERRIDE` in a user namespace allow overriding permissions on a file owned by a UID that isn't even mapped in that namespace?
I need to remember how capabilities are checked. They're checked against the user namespace that owns the resource. For a file, that's the user namespace of the filesystem *or* the user namespace that the inode's UID belongs to.
Looking at `procfs`, I see `proc_init_fs_context` and confirm that the `s_user_ns` of the `super_block` is set to the user namespace of the PID namespace. So, if they've created a new user and PID namespace, and then mounted `procfs`, the `s_user_ns` *is* their new user namespace.
Now, inodes: `proc_get_inode` sets `inode->i_uid = de->uid;`, and `de->uid` is `GLOBAL_ROOT_UID`. Therefore, `GLOBAL_ROOT_UID` is considered to be "owned" by the initial user namespace.
The key question: If `inode->i_uid` is `GLOBAL_ROOT_UID`, and the user is in a child user namespace, does `CAP_DAC_OVERRIDE` in the *child* namespace let them write? Probably not, as `CAP_DAC_OVERRIDE` usually only works
|
| 50/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/namei.c Name:inode_permission]
Results: map[SourceCode: 611: /**
612: * inode_permission - Check for access rights to a given inode
613: * @idmap: idmap of the mount the inode was found from
614: * @inode: Inode to check permission on
615: * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
616: *
617: * Check for read/write/execute permissions on an inode. We use fs[ug]id for
618: * this, letting us set arbitrary permissions for filesystem access without
619: * changing the "normal" UIDs which are used for other things.
620: *
621: * When checking for MAY_APPEND, MAY_WRITE must also be set in @mask.
622: */
623: int inode_permission(struct mnt_idmap *idmap,
624: struct inode *inode, int mask)
625: {
626: int retval;
627:
628: retval = sb_permission(inode->i_sb, inode, mask);
629: if (unlikely(retval))
630: return retval;
631:
632: if (mask & MAY_WRITE) {
633: /*
634: * Nobody gets write access to an immutable file.
635: */
636: if (unlikely(IS_IMMUTABLE(inode)))
637: return -EPERM;
638:
639: /*
640: * Updating mtime will likely cause i_uid and i_gid to be
641: * written back improperly if their true value is unknown
642: * to the vfs.
643: */
644: if (unlikely(HAS_UNMAPPED_ID(idmap, inode)))
645: return -EACCES;
646: }
647:
648: retval = do_inode_permission(idmap, inode, mask);
649: if (unlikely(retval))
650: return retval;
651:
652: retval = devcgroup_inode_permission(inode, mask);
653: if (unlikely(retval))
654: return retval;
655:
656: return security_inode_permission(inode, mask);
657: }
SourceFile:fs/namei.c]
|
| 51/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 12983
output: 38
thoughts: 100
Thoughts: Okay, let me break this down.
**Access Control Based on Unmapped IDs**
Alright, so I'm digging into this code and I see something interesting in lines 644-645. Essentially, it boils down to this: if the kernel detects an unmapped UID or GID associated with an inode, then access is flat-out denied with an `-EACCES` error. No ifs, ands, or buts. This is all predicated on the idea of user namespaces and the `idmap` associated with a mounted filesystem. The implication is that we're talking about a security check here. The `HAS_UNMAPPED_ID` macro is the crux of this logic. It's the thing doing the actual dirty work of checking the ID mapping. The idea is that the kernel is enforcing a separation between UIDs and GIDs within the user namespace and those of the parent or root namespace. Access isn't granted unless the given ID is valid (mapped). This feels pretty standard for modern systems.
|
| 52/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/fs.h Name:HAS_UNMAPPED_ID]
Results: map[SourceCode:2183: static inline bool HAS_UNMAPPED_ID(struct mnt_idmap *idmap,
2184: struct inode *inode)
2185: {
2186: return !vfsuid_valid(i_uid_into_vfsuid(idmap, inode)) ||
2187: !vfsgid_valid(i_gid_into_vfsgid(idmap, inode));
2188: }
SourceFile:include/linux/fs.h]
|
| 53/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 13485
output: 38
thoughts: 222
Thoughts: **Analyzing User Namespace and File Permissions**
Okay, so if the user has cleverly remapped their UID 1000 to 0 (root) within their user namespace, and the file in question is owned by the *real* root user (UID 0 globally, what I'll call `GLOBAL_ROOT_UID`), then we have a situation. That `GLOBAL_ROOT_UID` isn't mapped inside the user namespace, right? So, when the kernel tries to translate the inode's UID to a valid virtual file system UID using `i_uid_into_vfsuid`, it's going to fail and return an invalid `vfsuid`. Therefore, `HAS_UNMAPPED_ID` will be set to true. The upshot? `inode_permission` will predictably return `-EACCES` when checking for write permissions (`MAY_WRITE`). That makes perfect sense.
But⦠hold on a second. Does this behavior extend to `procfs`? `procfs` is, let's be honest, a bit of a special case. However, `inode_permission` is still the fundamental, standard check, isn't it? It should hold true, regardless.
Let's quickly check if there's any specialized permission logic within `procfs`. I recall `proc_get_inode` sets `inode->i_op = de->proc_iops;`, and that for regular files, this `de->proc_iops` gets assigned `proc_file_inode_operations`. That sounds like the key. I need to dive into `proc_file_inode_operations` and see what it contains. Is there custom permission checking in there, or is it just the standard `inode_permission` call? I really need to confirm this.
|
| 54/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_file_inode_operations]
Results: map[SourceCode: 153: static const struct inode_operations proc_file_inode_operations = {
154: .setattr = proc_setattr,
155: };
SourceFile:fs/proc/generic.c]
|
| 55/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 14201
output: 36
thoughts: 403
Thoughts: **Analyzing Procfs Permission Logic**
Okay, so I'm diving into this `procfs` permission issue. My initial thought is, since the code snippet I'm looking at doesn't explicitly have a `.permission` method, it's using the default permission checking mechanism. But hang on, a quick check shows that if `.permission` isn't defined, it defaults to `generic_permission`. Makes sense.
Now, `do_inode_permission` seems to be the core function here. It calls the inode's `i_op->permission` if available, and if not, falls back to `generic_permission`. But, `inode_permission` (the wrapper around the core permission check) *already* handles the `HAS_UNMAPPED_ID` check. That's key.
This means that if the host's UID 0 isn't mapped within the current user namespace, the user, even if they appear as "root" within that namespace, won't be able to write to the file. Itβs the unmapped ID issue that is the crux of the matter.
However, the scenario specifies that the user maps their UID to 0 within a new user namespace and mounts a new `procfs`. If they are mounting a new procfs, the super_block's `s_user_ns` is going to be the new user namespace. So I need to ask myself, does this change how we interpret `de->uid`?
Looking at `proc_get_inode`, line 648: `inode->i_uid = de->uid`. `de->uid` is a `kuid_t`, which is an internal representation of the UID. For `proc_root`, it looks like itβs set to `GLOBAL_ROOT_UID`.
If the user namespace doesnβt have a mapping for `GLOBAL_ROOT_UID`, then `i_uid_into_vfsuid` will return `INVALID_VFSUID`. So now it becomes obvious. The new procfs will have uid information that is checked for validity inside the new user namespace.
Now, thinking through this logically, if the user is mounting a *new* `procfs`, they're using the `mount` syscall (or the equivalent API call). The procfs is special because it is a single-instance filesystem per PID namespace... No, that's not right, it is one instance per PID namespace. `proc_mount` (or now in modern versions `proc_get_tree`) is responsible for finding or creating a `super_block` for that PID namespace.
So now I need to dive into the code for `proc_get_tree` to see exactly what's happening.
|
| 56/4 |
2026/06/01 17:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_get_tree]
Results: map[SourceCode: 310: static int proc_get_tree(struct fs_context *fc)
311: {
312: return get_tree_nodev(fc, proc_fill_super);
313: }
SourceFile:fs/proc/root.c]
|
| 57/4 |
2026/06/01 17:42 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 15311
output: 36
thoughts: 8
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Analyzing `proc_fill_super`**
Alright, I see we're thinking about `proc_fill_super`. My immediate mental parsing is to assess its purpose in the overall system. Is it related to initialization, perhaps filling a super structure, or more specifically, super fields with values? Knowing that this process is happening, I'm already mentally running through the data structures it might be interacting with β the underlying `struct` definitions, any associated memory allocation strategies, and potential implications for data alignment and packing.
I'm starting to consider possible error conditions: null pointers, invalid data passed to it, or if it's interacting with any sort of lock. What are the calling conventions? Is this a high-performance routine, optimized for speed, or is it intended for more general use with a focus on safety and correctness? Context is key - what is calling this proc and what can be assumed? And if it's the latter, any associated invariants? What if there's an issue?
My internal checklist immediately includes thinking about memory leaks, potential buffer overflows if it's operating on character strings, or unexpected side effects that could manifest later. If it's a critical section, I'm mentally checking for any potential for deadlocks or race conditions. This quickly shifts to assessing any external dependencies that might be in play. I am quickly trying to understand the potential performance implications, and if there are any optimizations that could be performed, or even if the existing code is already as efficient as it needs to be.
|
| 58/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_fill_super]
Results: map[SourceCode: 245: static int proc_fill_super(struct super_block *s, struct fs_context *fc)
246: {
247: struct proc_fs_context *ctx = fc->fs_private;
248: struct inode *root_inode;
249: struct proc_fs_info *fs_info;
250: int ret;
251:
252: fs_info = kzalloc_obj(*fs_info);
253: if (!fs_info)
254: return -ENOMEM;
255:
256: fs_info->pid_ns = get_pid_ns(ctx->pid_ns);
257: proc_apply_options(fs_info, fc, current_user_ns());
258:
259: /* User space would break if executables or devices appear on proc */
260: s->s_iflags |= SB_I_USERNS_VISIBLE | SB_I_NOEXEC | SB_I_NODEV;
261: s->s_flags |= SB_NODIRATIME | SB_NOSUID | SB_NOEXEC;
262: s->s_blocksize = 1024;
263: s->s_blocksize_bits = 10;
264: s->s_magic = PROC_SUPER_MAGIC;
265: s->s_op = &proc_sops;
266: s->s_time_gran = 1;
267: s->s_fs_info = fs_info;
268:
269: /*
270: * procfs isn't actually a stacking filesystem; however, there is
271: * too much magic going on inside it to permit stacking things on
272: * top of it
273: */
274: s->s_stack_depth = FILESYSTEM_MAX_STACK_DEPTH;
275:
276: /* procfs dentries and inodes don't require IO to create */
277: s->s_shrink->seeks = 0;
278:
279: pde_get(&proc_root);
280: root_inode = proc_get_inode(s, &proc_root);
281: if (!root_inode) {
282: pr_err("proc_fill_super: get root inode failed\n");
283: return -ENOMEM;
284: }
285:
286: s->s_root = d_make_root(root_inode);
287: if (!s->s_root) {
288: pr_err("proc_fill_super: allocate dentry failed\n");
289: return -ENOMEM;
290: }
291:
292: ret = proc_setup_self(s);
293: if (ret) {
294: return ret;
295: }
296: return proc_setup_thread_self(s);
297: }
SourceFile:fs/proc/root.c]
|
| 59/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 16576
output: 22
thoughts: 876
Thoughts: **Analyzing Procfs and User Namespaces: A Deep Dive into Permissions**
Okay, so I'm thinking about how permissions work with procfs entries, specifically those created with `proc_create_data`, in the context of user namespaces. The initial setup is clear: the `super_block` is initialized, and `s_user_ns` is linked to the user namespace of the PID namespace where the procfs is mounted.
My mind starts to wander. If someone creates a new user namespace *and* a new PID namespace, then `ctx->pid_ns->user_ns` points to this newly created namespace. The real problem comes when we deal with UID mapping. Let's say a user maps their host UID 1000 to userns UID 0. The crucial part is that a `proc_dir_entry` created via something like `proc_create_data` (think kernel module) has `de->uid = GLOBAL_ROOT_UID`. Then, when `proc_get_inode` is called, `inode->i_uid` becomes `GLOBAL_ROOT_UID`.
In our user namespace, `GLOBAL_ROOT_UID` isn't mapped. This triggers `HAS_UNMAPPED_ID`, and thus `inode_permission` returns `-EACCES`, effectively denying access.
I pause, wondering if `de->uid` could be something *other* than `GLOBAL_ROOT_UID`. `__proc_create` sets `ent->uid` to `(*parent)->uid`. If the file is placed directly under `/proc`, its parent is `proc_root`, which has `proc_root.uid` set to `GLOBAL_ROOT_UID`. Okay, that's consistent.
Then, the thought hits me, is there a case where proc entries are created after the userns? No, `proc_create_data` is almost always used by modules on initialization or when the driver is loaded, which is global.
I reconsider, maybe some are per-namespace? But I doubt it. Even if so, the `proc_dir_entry` structure itself is usually shared unless under `/proc/net` or similar. I remind myself that `/proc` is largely global, the same `proc_dir_entry` tree applies across all `procfs` mounts, except for namespace-specific entries.
I go back to the code, I see `proc_register` in `fs/proc/generic.c`. The new PDE goes into the parent's `subdir` tree. That tree is global. So, for a file like `/proc/sysrq-trigger` (or even some custom `/proc/mydev`), `de->uid` *will* be `GLOBAL_ROOT_UID`.
The conclusion seems clear. An unprivileged user in a user namespace who is UID 0 in their namespace tries to write to a procfs file:
1. They're UID 0 in the userns.
2. The file belongs to `GLOBAL_ROOT_UID`.
3. `GLOBAL_ROOT_UID` isn't mapped in their userns.
4. `inode_permission` denies write access due to `HAS_UNMAPPED_ID`.
To be sure, I check the code snippet that I've been thinking about:
```c
644: if (unlikely(HAS_UNMAPPED_ID(idmap, inode)))
645: return -EACCES;
```
Yes, `HAS_UNMAPPED_ID` directly blocks access as expected.
One last thing, what if they try to map `GLOBAL_ROOT_UID`? But wait, an unprivileged user can't map UID 0 (host) to anything in their user namespace; they can only map their own UID. So, they can't map the owner of the proc file if they're unprivileged. That reinforces the security boundary.
Is there any exception? What about `SB_I_USERNS_VISIBLE`? I recall that `proc_fill_super` sets `s->s_iflags |= SB_I_USERNS_VISIBLE`. What is the impact of `SB_I_USERNS_VISIBLE`? Time to dig around in `fs/namei.c`.
|
| 60/4 |
2026/06/01 17:43 |
tool |
grepper |
0m
Args: map[Expression:SB_I_USERNS_VISIBLE]
Results: map[Output:fs/namespace.c=6398=static bool mount_too_revealing(const struct super_block *sb, int *new_mnt_flags)
--
fs/namespace.c-6408- s_iflags = sb->s_iflags;
fs/namespace.c:6409: if (!(s_iflags & SB_I_USERNS_VISIBLE))
fs/namespace.c-6410- return false;
--
fs/proc/root.c=245=static int proc_fill_super(struct super_block *s, struct fs_context *fc)
--
fs/proc/root.c-259- /* User space would break if executables or devices appear on proc */
fs/proc/root.c:260: s->s_iflags |= SB_I_USERNS_VISIBLE | SB_I_NOEXEC | SB_I_NODEV;
fs/proc/root.c-261- s->s_flags |= SB_NODIRATIME | SB_NOSUID | SB_NOEXEC;
--
fs/sysfs/mount.c=26=static int sysfs_get_tree(struct fs_context *fc)
--
fs/sysfs/mount.c-35- if (kfc->new_sb_created)
fs/sysfs/mount.c:36: fc->root->d_sb->s_iflags |= SB_I_USERNS_VISIBLE;
fs/sysfs/mount.c-37- return 0;
--
include/linux/fs/super_types.h=132=struct super_block {
--
include/linux/fs/super_types.h-328-/* sb->s_iflags to limit user namespace mounts */
include/linux/fs/super_types.h:329:#define SB_I_USERNS_VISIBLE 0x00000010 /* fstype already mounted */
include/linux/fs/super_types.h-330-#define SB_I_IMA_UNVERIFIABLE_SIGNATURE 0x00000020
--
kernel/acct.c=216=static int acct_on(const char __user *name)
--
kernel/acct.c-251- /* Exclude procfs and sysfs. */
kernel/acct.c:252: if (file_inode(file)->i_sb->s_iflags & SB_I_USERNS_VISIBLE)
kernel/acct.c-253- return -EINVAL;
]
|
| 61/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 19025
output: 33
thoughts: 334
Thoughts: **Analyzing User Namespace Permissions in Procfs**
Okay, so `SB_I_USERNS_VISIBLE` doesn't seem to be the magic bullet for permission issues I'm seeing. Let's dig back into `generic_permission`. But first, I need to consider a specific scenario with `procfs` and user namespaces. Does the kernel handle UID/GID differently when dealing with a non-initial user namespace?
Looking at `proc_get_inode`, specifically, lines 648-649, it's pretty clear:
```c
648: inode->i_uid = de->uid;
649: inode->i_gid = de->gid;
```
It's using `de->uid` directly, and I know `de->uid` ultimately points to `GLOBAL_ROOT_UID`. If I'm operating within a user namespace where `GLOBAL_ROOT_UID` isn't mapped, then the `i_uid` on the inode is still going to be `GLOBAL_ROOT_UID` β an unmapped value in my current namespace.
Now, imagine I map host UID 1000 to my namespace's UID 0. My effective file system UID (`fsuid`) will be `KUIDT_INIT(1000)`. However, the inode's `i_uid` will still be `KUIDT_INIT(0)`. Because 0 is a different number I have in the user namespace from the file system UID, I'm not the owner, right? I'm not the owner, and I don't have `CAP_DAC_OVERRIDE` on `KUIDT_INIT(0)` because it's not mapped in my user namespace. It's unmapped to my current UID.
Alright, let's circle back to the code. Specifically, let's examine `capable_wrt_inode_uididmap`, and while I'm at it, I should probably also refresh my memory of the `generic_permission` implementation.
|
| 62/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/namei.c Name:generic_permission]
Results: map[SourceCode: 494: /**
495: * generic_permission - check for access rights on a Posix-like filesystem
496: * @idmap: idmap of the mount the inode was found from
497: * @inode: inode to check access rights for
498: * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC,
499: * %MAY_NOT_BLOCK ...)
500: *
501: * Used to check for read/write/execute permissions on a file.
502: * We use "fsuid" for this, letting us set arbitrary permissions
503: * for filesystem access without changing the "normal" uids which
504: * are used for other things.
505: *
506: * generic_permission is rcu-walk aware. It returns -ECHILD in case an rcu-walk
507: * request cannot be satisfied (eg. requires blocking or too much complexity).
508: * It would then be called again in ref-walk mode.
509: *
510: * If the inode has been found through an idmapped mount the idmap of
511: * the vfsmount must be passed through @idmap. This function will then take
512: * care to map the inode according to @idmap before checking permissions.
513: * On non-idmapped mounts or if permission checking is to be performed on the
514: * raw inode simply pass @nop_mnt_idmap.
515: */
516: int generic_permission(struct mnt_idmap *idmap, struct inode *inode,
517: int mask)
518: {
519: int ret;
520:
521: /*
522: * Do the basic permission checks.
523: */
524: ret = acl_permission_check(idmap, inode, mask);
525: if (ret != -EACCES)
526: return ret;
527:
528: if (S_ISDIR(inode->i_mode)) {
529: /* DACs are overridable for directories */
530: if (!(mask & MAY_WRITE))
531: if (capable_wrt_inode_uidgid(idmap, inode,
532: CAP_DAC_READ_SEARCH))
533: return 0;
534: if (capable_wrt_inode_uidgid(idmap, inode,
535: CAP_DAC_OVERRIDE))
536: return 0;
537: return -EACCES;
538: }
539:
540: /*
541: * Searching includes executable on directories, else just read.
542: */
543: mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
544: if (mask == MAY_READ)
545: if (capable_wrt_inode_uidgid(idmap, inode,
546: CAP_DAC_READ_SEARCH))
547: return 0;
548: /*
549: * Read/write DACs are always overridable.
550: * Executable DACs are overridable when there is
551: * at least one exec bit set.
552: */
553: if (!(mask & MAY_EXEC) || (inode->i_mode & S_IXUGO))
554: if (capable_wrt_inode_uidgid(idmap, inode,
555: CAP_DAC_OVERRIDE))
556: return 0;
557:
558: return -EACCES;
559: }
SourceFile:fs/namei.c]
|
| 63/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 20913
output: 38
thoughts: 47
Thoughts: Okay, here's my interpretation of that thought process, from an expert's perspective:
**Deconstructing Permission Checks: A Dive into Capability Enforcement**
Alright, so `generic_permission` is the entry point, and it's calling `capable_wrt_inode_uidgid`. Makes sense, that's where the heavy lifting for checking capabilities related to a specific inode, user, and group ID should reside. Let's see what's happening within `capable_wrt_inode_uidgid`. I need to figure out how this function uses the `idmap`, `inode`, and that crucial `CAP_DAC_OVERRIDE` capability flag. I'm guessing `capable_wrt_inode_uidgid` is the function that determines whether a process has the necessary permissions to perform a specific operation on an inode, based on things like its UID/GID, and perhaps even file flags or ACLs, with a capability being used to override these checks in certain cases. I need to understand how the security checks are done and how capabilities fit into that model. This is key to how permissions are handled by the system.
|
| 64/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/capability.c Name:capable_wrt_inode_uidgid]
Results: map[SourceCode: 463: /**
464: * capable_wrt_inode_uidgid - Check nsown_capable and uid and gid mapped
465: * @idmap: idmap of the mount @inode was found from
466: * @inode: The inode in question
467: * @cap: The capability in question
468: *
469: * Return true if the current task has the given capability targeted at
470: * its own user namespace and that the given inode's uid and gid are
471: * mapped into the current user namespace.
472: */
473: bool capable_wrt_inode_uidgid(struct mnt_idmap *idmap,
474: const struct inode *inode, int cap)
475: {
476: struct user_namespace *ns = current_user_ns();
477:
478: return ns_capable(ns, cap) &&
479: privileged_wrt_inode_uidgid(ns, idmap, inode);
480: }
SourceFile:kernel/capability.c]
|
| 65/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 21557
output: 40
thoughts: 12
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, and delivered as a first-person summary:
**Considering `privileged_wrt_inode_uidgid`**
Alright, let's dissect this. When I see `privileged_wrt_inode_uidgid`, my mind immediately goes to the heart of file system security and access control. We're talking about a mechanism, or perhaps a flag or set of flags, that somehow relates to *privilege* β likely elevated permissions β in the context of file or inode ownership and the associated user and group IDs (UID/GID). The term "wrt" is, of course, short for "with respect to".
My initial thought process is to consider the implications:
* **Security Concerns:** What kind of scenarios trigger this "privilege"? Is it related to capabilities, ACLs, extended attributes, or some other nuance of permissions? How does it interact with the traditional Unix/POSIX permission model (rwx-owner, rwx-group, rwx-others)? Are we looking at a system call, a kernel data structure, or something else entirely? A security misconfiguration here could be catastrophic.
* **Operational Context:** Where does this come into play? Is it network file systems (NFS, SMB), containerized environments, cloud storage, or standard local file systems? Certain systems, such as filesystems using capabilities, may require special handling in this respect. Understanding the target context is vital to understand the possible behavior.
* **Implementation Details:** How exactly is this `privileged_wrt_inode_uidgid` implemented? Are we talking about a simple flag, a complex lookup table, or a runtime check? What are the performance implications? Is it efficient, or a potential bottleneck? Are there race conditions that could lead to security vulnerabilities?
* **User and Group IDs:** How are the UIDs and GIDs being checked and interpreted? Is the system honoring user namespace mappings, or is it working with the "real" UIDs/GIDs? Does it affect how UID/GIDs are handled in setuid/setgid binaries?
* **Interaction with Other Security Mechanisms:** I must immediately think how this interacts with other security measures, such as SELinux, AppArmor, or other mandatory access control systems. Does it bypass those mechanisms under specific conditions? Are they integrated to function as expected?
My goal is to understand the *why* and the *how*. Knowing how this works internally allows me to correctly diagnose the behavior in the systems that depend on it. That's where I start.
|
| 66/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/user_namespace.c Name:privileged_wrt_inode_uidgid]
Results: map[SourceCode: 447: /**
448: * privileged_wrt_inode_uidgid - Do capabilities in the namespace work over the inode?
449: * @ns: The user namespace in question
450: * @idmap: idmap of the mount @inode was found from
451: * @inode: The inode in question
452: *
453: * Return true if the inode uid and gid are within the namespace.
454: */
455: bool privileged_wrt_inode_uidgid(struct user_namespace *ns,
456: struct mnt_idmap *idmap,
457: const struct inode *inode)
458: {
459: return vfsuid_has_mapping(ns, i_uid_into_vfsuid(idmap, inode)) &&
460: vfsgid_has_mapping(ns, i_gid_into_vfsgid(idmap, inode));
461: }
SourceFile:kernel/capability.c]
|
| 67/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 22447
output: 38
thoughts: 616
Thoughts: **Analyzing `procfs` File Ownership and User Namespaces**
Okay, so I'm looking into this `privileged_wrt_inode_uidgid` function. It looks like it's in `kernel/capability.c`, which makes sense, but I was initially thrown by some of the previous output that suggested it was in `fs/proc/generic.c`. Alright, I see the logic flow here. It's checking if the UID is mapped in the user namespace using `vfsuid_has_mapping(ns, ...)`. If the UID isn't mapped, it returns false. So `capable_wrt_inode_uidgid` then returns false, meaning `CAP_DAC_OVERRIDE` won't help if the UID isn't mapped.
So, if a file is owned by `GLOBAL_ROOT_UID` and that UID isn't mapped in the user namespace, you can't write to it. Makes sense. But is this *always* the case? Let's check how the inode UID is set. In `proc_get_inode`, the UID is set from `de->uid`, and `de->uid` is set in `__proc_create`. It looks like it's taking the parent's UID and GID, and for top-level files, the parent is `proc_root`, and `proc_root.uid` is zero.
Now, what about when a user namespace *does* map UID 0? Hmm, an unprivileged user can't map host UID 0, they can only map their own UID, let's say 1000, to a UID in the userns, like 0. So, that means userns UID 0 is host UID 1000, and host UID 0 is unmapped in the userns. It seems they can't write to it then.
Wait, but there is a special case in `procfs` specifically for user namespaces. Some files are "owned" by the user namespace! Let's re-examine `proc_set_user`. It's used to set the UID/GID of a PDE. Most kernel modules use `proc_create_data(name, mode, parent, ops, data)`, and they don't call `proc_set_user` afterwards. So, the default behavior is that the file takes the parent's UID/GID.
Is there any case where `proc_root.uid` *isn't* `GLOBAL_ROOT_UID`? No, as it's a global static variable.
What about `/proc/self`? That's a symlink. What about the `/proc/[pid]` directories? Those are dynamically created, and `proc_pid_make_inode` sets the UID/GID to the owner of the process.
|
| 68/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/base.c Name:proc_pid_make_inode]
Results: map[SourceCode:1944: struct inode *proc_pid_make_inode(struct super_block *sb,
1945: struct task_struct *task, umode_t mode)
1946: {
1947: struct inode * inode;
1948: struct proc_inode *ei;
1949: struct pid *pid;
1950:
1951: /* We need a new inode */
1952:
1953: inode = new_inode(sb);
1954: if (!inode)
1955: goto out;
1956:
1957: /* Common stuff */
1958: ei = PROC_I(inode);
1959: inode->i_mode = mode;
1960: inode->i_ino = get_next_ino();
1961: simple_inode_init_ts(inode);
1962: inode->i_op = &proc_def_inode_operations;
1963:
1964: /*
1965: * grab the reference to task.
1966: */
1967: pid = get_task_pid(task, PIDTYPE_PID);
1968: if (!pid)
1969: goto out_unlock;
1970:
1971: /* Let the pid remember us for quick removal */
1972: ei->pid = pid;
1973:
1974: task_dump_owner(task, 0, &inode->i_uid, &inode->i_gid);
1975: security_task_to_inode(task, inode);
1976:
1977: out:
1978: return inode;
1979:
1980: out_unlock:
1981: iput(inode);
1982: return NULL;
1983: }
SourceFile:fs/proc/base.c]
|
| 69/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 24249
output: 36
thoughts: 491
Thoughts: **Understanding Procfs Ownership and User Namespaces**
Okay, so I'm thinking about procfs and how ownership works, especially in the context of user namespaces. My initial thought is, when dealing with PID-related entries, the owner is the task's owner, makes sense. If my user ID is 1000 and I'm looking at my own process under `/proc/self`, the inode should be owned by UID 1000, right? And inside my user namespace, that UID 1000 is mapped to 0, which is basically myself as far as that namespace is concerned. Therefore, I see the file as owned by 0 and I should be able to write to it if the mode allows, like 0644.
But, the question centers on a file *created* with `proc_create_data`. That function is used for those "generic" proc entries, not the PID-specific ones. PID-specific entries are created with something like `proc_pident_lookup`, right? So `proc_create_data` handles things like `/proc/cpuinfo`, `/proc/meminfo`, or things created by drivers. For these, I think the `de->uid` is typically 0.
Wait, I should check if `proc_create_data` is ever used to create things *within* `/proc/[pid]`. Hmm, usually no, the stuff in `/proc/[pid]` is defined in these `pid_entry` arrays and handled by `proc_pident_instantiate`.
So, if it's a file created with `proc_create_data` in `/proc` (or a subdirectory that's not PID-specific), the owner would be `GLOBAL_ROOT_UID`.
Okay, so if a user is unprivileged and they map their UID to 0 in a new user namespace, they will not be able to write to a file owned by `GLOBAL_ROOT_UID` with mode 0644. Because:
1. They're not the owner (their host UID is 1000, file host UID is 0).
2. They are not in the group.
3. The "others" permission is `r`.
4. `CAP_DAC_OVERRIDE` won't help because that UID isn't mapped inside the user namespace.
Wait, let me just double check if procfs has any special logic to change the owner of files when mounted in a user namespace. Let me check the `proc_fill_super` code. Ah, it calls `proc_apply_options`, I should examine the contents of the `proc_apply_options` function.
|
| 70/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_apply_options]
Results: map[SourceCode: 226: static void proc_apply_options(struct proc_fs_info *fs_info,
227: struct fs_context *fc,
228: struct user_namespace *user_ns)
229: {
230: struct proc_fs_context *ctx = fc->fs_private;
231:
232: if (ctx->mask & (1 << Opt_gid))
233: fs_info->pid_gid = make_kgid(user_ns, ctx->gid);
234: if (ctx->mask & (1 << Opt_hidepid))
235: fs_info->hide_pid = ctx->hidepid;
236: if (ctx->mask & (1 << Opt_subset))
237: fs_info->pidonly = ctx->pidonly;
238: if (ctx->mask & (1 << Opt_pidns) &&
239: !WARN_ON_ONCE(fc->purpose == FS_CONTEXT_FOR_RECONFIGURE)) {
240: put_pid_ns(fs_info->pid_ns);
241: fs_info->pid_ns = get_pid_ns(ctx->pid_ns);
242: }
243: }
SourceFile:fs/proc/root.c]
|
| 71/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 25722
output: 40
thoughts: 99
Thoughts: **Investigating UID Namespace Behavior**
Okay, so I'm digging into this inode UID behavior, and it doesn't appear the default UID is being altered as I expected. Hmm, that's not quite right...
Hold on, what about `s_user_ns`? That's the crucial piece, isn't it? If `s_user_ns` is actually the user namespace of the process mounting the file system, then the `i_uid_into_vfsuid` function should use *that* namespace to map the UID. That's the key. If the UID isn't mapped within that namespace, the function should correctly return `INVALID_VFSUID`.
Alright, it looks like I need to verify how `i_uid_into_vfsuid` actually behaves. Time to dig into that function's implementation.
|
| 72/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/fs.h Name:i_uid_into_vfsuid]
Results: map[SourceCode:1439: /**
1440: * i_uid_into_vfsuid - map an inode's i_uid down according to an idmapping
1441: * @idmap: idmap of the mount the inode was found from
1442: * @inode: inode to map
1443: *
1444: * Return: whe inode's i_uid mapped down according to @idmap.
1445: * If the inode's i_uid has no mapping INVALID_VFSUID is returned.
1446: */
1447: static inline vfsuid_t i_uid_into_vfsuid(struct mnt_idmap *idmap,
1448: const struct inode *inode)
1449: {
1450: return make_vfsuid(idmap, i_user_ns(inode), inode->i_uid);
1451: }
SourceFile:include/linux/fs.h]
|
| 73/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 26312
output: 36
thoughts: 11
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert user and presented in the first person:
**Analyzing the `i_user_ns(inode)` Function**
Alright, let's break down this `i_user_ns(inode)` function. My initial thought is, "Ah, this is likely dealing with *namespace association* for inodes, specifically related to user namespaces." I'm immediately thinking about how the kernel manages isolation and resource allocation across different user contexts. The `inode` argument, of course, is the key data structure, representing a file or other object within the filesystem.
My mind immediately starts sifting through potential implementations. Is this a simple look-up table, mapping inodes to their associated user namespaces? Or perhaps a more complex hierarchical structure, mirroring the nested nature of user namespace hierarchies? I'm wondering if there's any cleverness here, like using a caching mechanism to avoid redundant namespace lookups β that would be smart from a performance perspective. I also think about the performance impact - are there any locking considerations?
I'm also curious about the specific use cases. Is this primarily for security, ensuring that different users cannot access each other's filesystems, even if they have the same inode numbers? Or perhaps for resource management, allowing users to have their own "quota" of inodes, or potentially for containerization technologies? I am trying to determine what kind of performance issues this function might trigger. I am curious how deep in the kernel this is placed. Is this functionality placed where I would expect it, with the file system implementation or somewhere higher up?
I'm thinking about the implications for specific filesystems like NFS or virtual filesystems and if their implementations have any unique considerations here, or if this function abstracts that detail. I'm wondering about the potential edge cases: what happens when an inode is moved between different user namespaces, or when a user namespace is destroyed? Are these scenarios handled gracefully?
Ultimately, my goal here is to understand the purpose of this function and to confirm that the developers had a deep understanding of its impacts.
|
| 74/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/fs.h Name:i_user_ns]
Results: map[SourceCode:1409: static inline struct user_namespace *i_user_ns(const struct inode *inode)
1410: {
1411: return inode->i_sb->s_user_ns;
1412: }
SourceFile:include/linux/fs.h]
|
| 75/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 26887
output: 39
thoughts: 155
Thoughts: **Analyzing User Namespace and ID Mapping in Procfs**
Okay, so I'm looking at this code and it's using `inode->i_sb->s_user_ns`. Right. If the user has mounted `procfs` within their own user namespace, then that `s_user_ns` variable holds that user's specific namespace, which is crucial. And if I recall correctly, `inode->i_uid` will likely be set to `GLOBAL_ROOT_UID`. Hmm... now, if that `GLOBAL_ROOT_UID` isn't properly mapped inside their user namespace, `make_vfsuid` is supposed to return `INVALID_VFSUID`. Let me think... wait, isn't `make_vfsuid` called with `nop_mnt_idmap` in this scenario, which is usually the default for a fresh mount, or a mount without ID-mapped mounts? So, it should be calling `KUIDT_TO_VFSUID(kuid)` in those cases. Okay, I need to double-check that `make_vfsuid` function to be absolutely certain I'm interpreting this correctly.
|
| 76/4 |
2026/06/01 17:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/mnt_idmapping.h Name:make_vfsuid]
Results: map[SourceCode: 80: vfsuid_t make_vfsuid(struct mnt_idmap *idmap,
81: struct user_namespace *fs_userns,
82: kuid_t kuid)
83: {
84: uid_t uid;
85:
86: if (idmap == &nop_mnt_idmap)
87: return VFSUIDT_INIT(kuid);
88: if (idmap == &invalid_mnt_idmap)
89: return INVALID_VFSUID;
90: if (initial_idmapping(fs_userns))
91: uid = __kuid_val(kuid);
92: else
93: uid = from_kuid(fs_userns, kuid);
94: if (uid == (uid_t)-1)
95: return INVALID_VFSUID;
96: return VFSUIDT_INIT_RAW(map_id_down(&idmap->uid_map, uid));
97: }
SourceFile:fs/mnt_idmapping.c]
|
| 77/4 |
2026/06/01 17:43 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 27638
output: 27
thoughts: 1174
Thoughts: **Analyzing Procfs File Permissions in User Namespaces**
Okay, let's break this down. First, if `idmap` is the default, the `vfsuid` is just the `kuid`. That means the `vfsuid` is the same as the `kuid`. And the call `vfsuid_has_mapping` checks if the `vfsuid` (which *is* the `kuid` in this case) has a mapping in the user namespace (`ns`). If the `GLOBAL_ROOT_UID` isn't mapped, it returns false. So, my initial thought that `CAP_DAC_OVERRIDE` wouldn't help still stands.
Now, the DAC (Discretionary Access Control) check. We're looking at `acl_permission_check`, then `check_acl`, and finally the `generic_permission` logic. It boils down to this: `fsuid` vs. inode's UID. My `fsuid` is the task's effective UID. If I'm root in the user namespace, my `fsuid` is probably the host UID 1000. The inode UID for a typical procfs file is probably host UID 0. They don't match, so I'm not the owner. I'm not in the group. So, it comes down to "others" permissions. Mode 0644 means "others" have read, but not write access. So, write is denied.
Is there any way around this? The file could only be owned by me if `de->uid` was set to my UID. But `proc_create_data` does *not* do that; it uses the parent's UID. The parent is probably `proc_root` (or some other PDE). And I can't think of a way to override that.
Wait, could I mount `procfs` with special options? `proc_apply_options` only supports `gid`, `hidepid`, and `subset`βno `uid`. That's not a viable path.
Therefore, the answer is pretty clear: **No, an unprivileged user in a user namespace cannot write to a `procfs` file created with `proc_create_data` and mode 0644, even if they have root privileges within that namespace.**
But, hold on. What about `/proc/sys`? That's handled by `sysctl`, but the question specifically asks about `proc_create_data`. So it's not a relevant case.
Let's look at examples of `proc_create_data` in action. It's used by many drivers. What about `/proc/interrupts`? Nope, that's created with `proc_create_single`, which calls `__proc_create`. Same logic, though.
I should check if `proc_set_user` is used with something other than UID 0. Usually, it's only for PID-specific entries, and those don't use `proc_create_data`.
One more thing: when a user namespace is created, that namespace's PID namespace's procfs mount might have some special properties. But as we saw, the PDEs are global.
Wait a minute, I remember `proc_set_user` getting used in some places... but the question is general: "a procfs file created with `proc_create_data` and mode 0644." These are usually owned by host root.
Let's verify what happens if I am root in a user namespace and I try to write to `/proc/sysrq-trigger` (if it was 0644). If I'm root in a user namespace, I have `CAP_SYS_BOOT`, etc., *within that namespace*. But for files owned by host root, I don't have those capabilities.
Okay, back to `fs/proc/generic.c`. Is there any code that changes the UID of the inode based on the `s_user_ns`? In `proc_get_inode`, it looks like:
```c
inode->i_uid = de->uid;
inode->i_gid = de->gid;
```
Nope, direct.
I should check if `de->uid` is ever changed. It's part of the PDE, which is shared.
Finally, I found something in `fs/proc/root.c`.
```c
proc_apply_options(fs_info, fc, current_user_ns());
```
And `proc_apply_options`:
```c
if (ctx->mask & (1 << Opt_gid))
fs_info->pid
|
| 78/4 |
2026/06/01 17:44 |
tool |
codesearch-find-references |
0m
Args: map[Name:proc_fs_info::pid_gid]
Results: map[References:[map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:has_pid_permissions SourceFile:fs/proc/base.c SourceLine:759] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:proc_apply_options SourceFile:fs/proc/root.c SourceLine:233] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:proc_show_options SourceFile:fs/proc/inode.c SourceLine:177] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:proc_show_options SourceFile:fs/proc/inode.c SourceLine:178]] TruncatedOutput:false]
|
| 79/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 30080
output: 36
thoughts: 797
Thoughts: **Analyzing Procfs File Permissions and User Namespaces**
Okay, so I'm thinking through this `procfs` access scenario. It's used in `has_pid_permissions` for those PID directories, and I'm also considering `proc_root` and its root UID/GID. I need to figure out if there's any way an unprivileged user can write to a file created with `proc_create_data` and mode 0644.
First, I need to clarify that `proc_create_data` can indeed create files that aren't necessarily root-owned, if `proc_set_user` is called afterward. But the problem *doesn't* mention `proc_set_user`, so it defaults to the parent's UID/GID, which in `/proc`, is root.
Alright, is there a way an unprivileged user can write to a root-owned file in a userns? Theoretically, if they have `CAP_DAC_OVERRIDE` and the UID is mapped. But mapping UID 0 is not permitted. Then, would mapping the host UID 1000 to userns UID 0 work if the file were owned by host UID 1000? In that case, they'd be the owner. But `proc_create_data` files are usually owned by the PDE creator, which is the kernel, which is usually root.
Wait, can `proc_create_data` even be called by a process in a user namespace? Nope, that's a kernel-internal function, not exposed as a syscall. It's used internally by kernel code.
So, here's the scenario: 1) the kernel creates a `proc` file with `proc_create_data` and mode 0644, owned by host root. 2) An unprivileged user (UID 1000) creates a user namespace. 3) They map UID 1000 -> 0. 4) They mount a new `procfs`. 5) They try to write to the file.
The result? They're UID 0 in userns (host UID 1000). The file is host UID 0. They are *not* the owner. They are not in the group. The mode 0644 means "others" have read permission. `CAP_DAC_OVERRIDE` won't work because host UID 0 isn't mapped. Access denied.
Wait, is there *any* other way? Is there magic in the `procfs` mount itself? I've checked `proc_fill_super`.
What about the `idmap` on the mount itself? Can the user create an idmapped mount of `procfs`? They can't unless they have `CAP_SYS_ADMIN` in the *initial* user namespace (or the namespace that owns the mount). Wait, an unprivileged user can mount `procfs` in their own user namespace because of `FS_USERNS_MOUNT`, but they can't use `mount_setattr` to create an idmapped mount unless they have `CAP_SYS_ADMIN` in the user namespace that owns the mount's `super_block`. Actually, for a new mount they just created, they *do* have `CAP_SYS_ADMIN` in that namespace. But `mount_setattr` for idmapped mounts has strict requirements. Wait, does procfs actually support idmapped mounts? No. Only filesystems with the `FS_ALLOW_IDMAP` flag. Let's look again at `proc_fs_type`.
|
| 80/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_fs_type]
Results: map[SourceCode: 357: static struct file_system_type proc_fs_type = {
358: .name = "proc",
359: .init_fs_context = proc_init_fs_context,
360: .parameters = proc_fs_parameters,
361: .kill_sb = proc_kill_sb,
362: .fs_flags = FS_USERNS_MOUNT | FS_DISALLOW_NOTIFY_PERM,
363: };
SourceFile:fs/proc/root.c]
|
| 81/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 31854
output: 40
thoughts: 133
Thoughts: Okay, let's see, I'm analyzing the implications of the absence of `FS_ALLOW_IDMAP` here.
**No ID-Mapped `procfs` - Confirmed (But Let's Verify!)**
Alright, the lack of `FS_ALLOW_IDMAP` effectively blocks idmapped mounts for the `procfs`. Seems pretty straightforward, the conclusion of "No" looks good at first glance. But, given my experience, I need to be absolutely certain before calling it. My mind immediately jumps to potential edge cases. Are there *any* scenarios where `proc_create_data` could be used to create an entry in `/proc` that an unprivileged user in a user namespace could write to? Specifically, I'm thinking about namespaced entries within `/proc`, like `/proc/net`. That's the next logical step.
Let me check where `/proc/net` is created. It's likely in networking code. I'll need to look in `net/core/net_namespace.c` or perhaps `fs/proc/proc_net.c`. I need to understand the lifecycle of that `/proc` entry, and confirm that there's no subtle pathway here for unprivileged users to have write access in a namespaced context.
|
| 82/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_net.c Name:proc_net_ns_init]
Results: map[SourceCode: 348: static __net_init int proc_net_ns_init(struct net *net)
349: {
350: struct proc_dir_entry *netd, *net_statd;
351: kuid_t uid;
352: kgid_t gid;
353: int err;
354:
355: /*
356: * This PDE acts only as an anchor for /proc/${pid}/net hierarchy.
357: * Corresponding inode (PDE(inode) == net->proc_net) is never
358: * instantiated therefore blanket zeroing is fine.
359: * net->proc_net_stat inode is instantiated normally.
360: */
361: err = -ENOMEM;
362: netd = kmem_cache_zalloc(proc_dir_entry_cache, GFP_KERNEL);
363: if (!netd)
364: goto out;
365:
366: netd->subdir = RB_ROOT;
367: netd->data = net;
368: netd->nlink = 2;
369: netd->namelen = 3;
370: netd->parent = &proc_root;
371: netd->name = netd->inline_name;
372: memcpy(netd->name, "net", 4);
373:
374: uid = make_kuid(net->user_ns, 0);
375: if (!uid_valid(uid))
376: uid = netd->uid;
377:
378: gid = make_kgid(net->user_ns, 0);
379: if (!gid_valid(gid))
380: gid = netd->gid;
381:
382: proc_set_user(netd, uid, gid);
383:
384: /* Seed dentry revalidation for /proc/${pid}/net */
385: pde_force_lookup(netd);
386:
387: err = -EEXIST;
388: net_statd = proc_net_mkdir(net, "stat", netd);
389: if (!net_statd)
390: goto free_net;
391:
392: net->proc_net = netd;
393: net->proc_net_stat = net_statd;
394: return 0;
395:
396: free_net:
397: pde_free(netd);
398: out:
399: return err;
400: }
SourceFile:fs/proc/proc_net.c]
|
| 83/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33097
output: 40
thoughts: 167
Thoughts: **Delving into `/proc/net` Ownership**
Okay, so I've been digging into how `/proc/net` handles its permissions, and I think I've cracked it. The key piece is that when it's initialized, it's using `proc_set_user` and specifically calls `make_kuid(net->user_ns, 0)`. That's the giveaway. If a user has cleverly created a new network namespace *alongside* their own user namespace, then `net->user_ns` is going to refer to their very own user namespace. And when `make_kuid` is called with this `net->user_ns` and a UID of 0, what we get is the host UID that corresponds to 0 *within* that user namespace. In other words, for a standard user, their UID, say 1000, becomes the owner. The system is correctly mapping the UIDs. Boom! `/proc/net` becomes owned by the user, just as expected.
But that's just the directory itself. I need to understand the ownership of the *files* within `/proc/net`. Those are obviously created with something like `proc_create_net_data`. Right, time to dig deeper into the implementation of `proc_create_net_data`.
|
| 84/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_net.c Name:proc_create_net_data]
Results: map[SourceCode: 114: struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode,
115: struct proc_dir_entry *parent, const struct seq_operations *ops,
116: unsigned int state_size, void *data)
117: {
118: struct proc_dir_entry *p;
119:
120: p = proc_create_reg(name, mode, &parent, data);
121: if (!p)
122: return NULL;
123: pde_force_lookup(p);
124: p->proc_ops = &proc_net_seq_ops;
125: p->seq_ops = ops;
126: p->state_size = state_size;
127: return proc_register(parent, p);
128: }
SourceFile:fs/proc/proc_net.c]
|
| 85/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33862
output: 38
thoughts: 868
Thoughts: **Analyzing Procfs File Creation and Ownership**
Okay, let's break this down. My initial thought process revolves around `proc_create_net_data` and how it utilizes `proc_create_reg` and then `__proc_create`. I quickly recognize that this function, and by extension the files it creates, inherits the user ID of its parent directory. If the parent is `/proc/net`, which I know is user-owned in a namespaced context, then the new file *will* be user-owned. And, if the mode is 0644, I should be able to write to it.
Then comes the clarification regarding `proc_create_data`, which seems to be the core of the question. I realize this is different from `proc_create_net_data`, even though they are frequently used. I know that `proc_create_data` *also* inherits ownership from its parent directory. I should check if it's used with namespaced parents and confirm my suspicions that the `parent` argument is indeed passed to the function.
Now, I start to think about which parent PDEs are user-owned. I remember `/proc/net` but I'm looking for others. Then I think about the mount itself, especially if it's a new PID namespace and a fresh procfs.
Let's assume a common scenario: a module calls `proc_create_data("myfile", 0644, NULL, &ops, data)`. This creates `/proc/myfile`. The parent is `proc_root`, which is *not* namespaced and is globally owned. So `/proc/myfile` *won't* be user-writable. Even if I create a directory under it using `proc_mkdir` it's still going to be the same, so no user write access.
However, if the module is namespace-aware, it might use a namespaced parent.
But, the question is about the general case. I have to assume that we are talking about the common way `proc_create_data` is used.
I circle back and think about how else write access might be granted. Could `CAP_DAC_OVERRIDE` in the *initial* user namespace provide a loophole? No, this user is unprivileged. What if they're root within a user namespace after they mount the new procfs? Does the mount grant special permissions? Nope.
Finally, I'm thinking about the `proc_ops`. If there's a `write` handler, it will only be called if the VFS allows the write. The VFS check (`inode_permission`) happens first, so the proc_ops won't matter.
I need to quickly check the `proc_file_inode_operations` and `proc_dir_inode_operations` to ensure there isn't some `permission` method I missed. I didn't find one, but I checked anyway.
|
| 86/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_dir_inode_operations]
Results: map[SourceCode: 361: /*
362: * proc directories can do almost nothing..
363: */
364: static const struct inode_operations proc_dir_inode_operations = {
365: .lookup = proc_lookup,
366: .getattr = proc_getattr,
367: .setattr = proc_setattr,
368: };
SourceFile:fs/proc/generic.c]
|
| 87/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 35539
output: 38
thoughts: 22
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Investigating a Potential Permissions Issue**
Right, so I've hit a dead end, no `.permission` function in this area. That's not entirely unexpected, but it means I need to re-evaluate my approach. Okay, let's step back, what's a likely point of intersection with potential permissions checks? My mind immediately jumps to `proc_root_inode_operations`. That's where a lot of the initial access control for procfs tends to reside. It's the "front door," so to speak. If there's some interaction missing I'm betting that's where I need to be poking around.
|
| 88/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/root.c Name:proc_root_inode_operations]
Results: map[SourceCode: 434: /*
435: * proc root can do almost nothing..
436: */
437: static const struct inode_operations proc_root_inode_operations = {
438: .lookup = proc_root_lookup,
439: .getattr = proc_root_getattr,
440: };
SourceFile:fs/proc/root.c]
|
| 89/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 35878
output: 41
thoughts: 586
Thoughts: **Analyzing Potential Weaknesses in Procfs File Ownership**
Okay, so the question is still a firm "no," initially. The fact that the file uses `generic_permission` is a key point to start with. The challenge is figuring out if `i_uid` could be different. I was thinking, could `proc_set_user` be called directly by the kernel with a different UID? The question doesn't limit the scope, so I have to consider all possibilities. Since the file is created with `proc_create_data` with mode 0644, and no other details are provided, I have to assume the default ownership is root.
I started to consider if `proc_create_data` is used at all to create files meant to be writable by non-privileged users within a userns. Typically, these types of files are in `/proc/net` or `/proc/self`, but they leverage specific creation functions.
Then I found some interesting code in `fs/proc/generic.c`:
```c
474: proc_set_user(ent, (*parent)->uid, (*parent)->gid);
```
If I were an unprivileged user, and I could create a PDE, I could also use this to set its owner. However, unprivileged users can't create PDEs. Those can only be created by kernel code. What if a kernel module creates a PDE and then wants the current user to be able to write to it? The module would have to use `proc_set_user` to specify the UID. But `proc_create_data` is normally called during module initialization, when there is no current user (or the user loading the module is root).
I also considered whether there might be some `procfs` mount option that allows overriding the UID. After checking `proc_apply_options`, it only had `gid`. I went back and checked `proc_get_inode` again:
```c
648: inode->i_uid = de->uid;
649: inode->i_gid = de->gid;
```
I asked myself, when is `de->uid` updated? It looks like only `proc_set_user` can do it.
Finally, I thought about whether `proc_create_data` is ever used for files *not* in the global `/proc`. As I said, it can be used for subdirectories. But if the whole tree begins with `proc_root`, and `proc_root` is owned by `GLOBAL_ROOT_UID`, everything will be owned by `GLOBAL_ROOT_UID` unless `proc_set_user` is called. The `/proc/sys` case is handled by `fs/proc/proc_sysctl.c`. It has its own inode operations, so I should look at `proc_sys_inode_operations`.
|
| 90/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_sysctl.c Name:proc_sys_inode_operations]
Results: map[SourceCode: 873: static const struct inode_operations proc_sys_inode_operations = {
874: .permission = proc_sys_permission,
875: .setattr = proc_sys_setattr,
876: .getattr = proc_sys_getattr,
877: };
SourceFile:fs/proc/proc_sysctl.c]
|
| 91/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 37236
output: 39
thoughts: 24
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing the `proc_sys_permission` Method**
Right, so I've stumbled upon a `.permission` method, specifically `proc_sys_permission`, and naturally, my first thought is to dive right in. I need to understand its function. What's it doing with those `proc_sys` files? Is it dealing with access control, file permissions, or something more nuanced within the kernel's process management? I'm already mentally running through the typical `inode` checks, capabilities, maybe even SELinux or AppArmor hooks, depending on the system. The specific naming suggests this is related to something within the `/proc/sys` filesystem, which immediately flags potential security implications. I'm keen to see if this method is implementing any novel permission schemes, or if it's following established kernel patterns. Understanding this method is critical to assessing the overall security posture related to process and system parameter interaction. The devil's usually in the details here, so let's get into it.
|
| 92/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_sysctl.c Name:proc_sys_permission]
Results: map[SourceCode: 792: static int proc_sys_permission(struct mnt_idmap *idmap,
793: struct inode *inode, int mask)
794: {
795: /*
796: * sysctl entries that are not writeable,
797: * are _NOT_ writeable, capabilities or not.
798: */
799: struct ctl_table_header *head;
800: const struct ctl_table *table;
801: int error;
802:
803: /* Executable files are not allowed under /proc/sys/ */
804: if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))
805: return -EACCES;
806:
807: head = grab_header(inode);
808: if (IS_ERR(head))
809: return PTR_ERR(head);
810:
811: table = PROC_I(inode)->sysctl_entry;
812: if (!table) /* global root - r-xr-xr-x */
813: error = mask & MAY_WRITE ? -EACCES : 0;
814: else /* Use the permissions on the sysctl table entry */
815: error = sysctl_perm(head, table, mask & ~MAY_NOT_BLOCK);
816:
817: sysctl_head_finish(head);
818: return error;
819: }
SourceFile:fs/proc/proc_sysctl.c]
|
| 93/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 37983
output: 38
thoughts: 7
Thoughts: Okay, here's my summary, framed as my internal thought process, assuming I'm well-versed in system administration and security:
**Thinking Through `sysctl_perm` and its Implications**
Alright, let's break this down. When I see `sysctl_perm`, my mind immediately goes to the heart of kernel parameter control. I'm thinking about the level of privilege granted to modify system settings on the fly. This is critical, obviously, because unchecked access here is a direct path to system instability, security breaches, or both.
I'm thinking about the granularity of the permission system. Is it a straightforward binary yes/no, or are we dealing with a more nuanced approach? Are there access control lists? Role-based permissions? The more sophisticated the control, the better, but it also increases the chance of complexity issues and potential misconfigurations.
I start to consider the different scenarios: what users or processes are granted access to tweak which specific sysctl variables? Is this access tied to user groups, capabilities, or specific security contexts? Any default configurations are important to evaluate - what gets set by default? I need to analyze if the defaults are secure by design or permissive?
I'm mentally running through the critical variables: network settings, memory management, process limits, security-related parameters, and thinking about the potential impact of improper modification. For example, a casually set `net.ipv4.ip_forward` could accidentally turn a server into an open relay. Likewise, inadequate memory constraints can lead to resource exhaustion.
The question of logging is paramount. Are these changes logged? Audited? Can I trace who made which change and when? Without this, I'm flying blind in a security incident. A robust audit trail is essential, and I want to see the details of how `sysctl_perm` works with other security measures like AppArmor, SELinux, or other mandatory access control systems. Are there any conflicts or overlaps?
I'm also considering the attack surface. Are we looking at a system with root access, or are we dealing with a less privileged user who can still potentially exploit vulnerabilities? If privileged access exists, I need to evaluate the potential for privilege escalation vulnerabilities. It's a risk. I need to know how this permission system defends against such scenarios.
This whole thing boils down to risk management. Understanding `sysctl_perm` is absolutely crucial for maintaining a secure and stable environment. I need to dig deep, test thoroughly, and document everything, because with great power comes great responsibility, and in this case, a whole lot of potential headaches.
|
| 94/4 |
2026/06/01 17:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_sysctl.c Name:sysctl_perm]
Results: map[SourceCode: 436: static int sysctl_perm(struct ctl_table_header *head, const struct ctl_table *table, int op)
437: {
438: struct ctl_table_root *root = head->root;
439: int mode;
440:
441: if (root->permissions)
442: mode = root->permissions(head, table);
443: else
444: mode = table->mode;
445:
446: return test_perm(mode, op);
447: }
SourceFile:fs/proc/proc_sysctl.c]
|
| 95/4 |
2026/06/01 17:44 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 38766
output: 37
thoughts: 6
Thoughts: Okay, here's the summary, rendered as a first-person thought process, keeping in mind the user is an expert:
**Analyzing the `test_perm` Function**
Alright, let's break down this `test_perm` function. My initial thought, seeing this, is that it's likely designed to assess permutation testing, probably in the context of statistical inference, or maybe even validating the implementation of a permutation procedure. The name itself is fairly transparent; it's a test for something related to permutations. The specifics will, of course, depend entirely on the context of its use within the overall codebase.
My next step, as always, is to think about the inputs and expected outputs. What data is it operating on? Is it taking raw data samples, a pre-calculated test statistic, or something else entirely? What does a "pass" or "fail" mean in the output? Is it returning a p-value, a confidence interval, a boolean flag, or throwing an exception? Understanding this data flow is paramount to understanding its purpose. I'll need to examine the function definition and any related documentation or comments for clues, and will likely go and consult the rest of the code in order to understand how this is used.
I'm instantly considering the potential pitfalls. Permutation tests, while powerful, can be computationally expensive, particularly for large datasets and/or complex test statistics. Is this function optimized? Are there any clever sampling strategies used to speed things up (e.g., importance sampling, if appropriate)? Or, is it perhaps designed for smaller datasets, more for validation and correctness checking than for serious statistical analysis? The implementation details would really clear up any questions I have here.
I'll be paying close attention to the null hypothesis being tested. Is it a simple equality of means, medians, or distributions, or something more nuanced? The choice of test statistic will be crucial. Does it handle potential issues like ties in the data, or the presence of outliers? I expect that it's implemented correctly, but will need to see for myself.
Finally, I'm already anticipating the kind of edge cases I'd test. Non-numeric data? Missing values? Extremely small or large sample sizes? Any known theoretical limitations of the permutation procedure? I'll probably be thinking of a series of unit tests to address the kinds of scenarios, with carefully crafted examples designed to stress-test the function, and verify its correctness and accuracy. It's often the edge cases that expose weaknesses in any function, so that is where I will concentrate.
|
| 96/4 |
2026/06/01 17:45 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_sysctl.c Name:test_perm]
Results: map[SourceCode: 425: static int test_perm(int mode, int op)
426: {
427: if (uid_eq(current_euid(), GLOBAL_ROOT_UID))
428: mode >>= 6;
429: else if (in_egroup_p(GLOBAL_ROOT_GID))
430: mode >>= 3;
431: if ((op & ~mode & (MAY_READ|MAY_WRITE|MAY_EXEC)) == 0)
432: return 0;
433: return -EACCES;
434: }
SourceFile:fs/proc/proc_sysctl.c]
|
| 97/4 |
2026/06/01 17:45 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 39536
output: 34
thoughts: 985
Thoughts: **Analyzing Procfs File Permissions**
Okay, let's break this down. My initial thought was about `test_perm` and `GLOBAL_ROOT_UID`. If the effective UID isn't root (which it won't be for an unprivileged user, especially in a user namespace), it defaults to checking "others" permissions. With a mode of 0644, "others" get read-only access. So, that's a *no* for write access, at first glance.
But wait, I need to be precise. This isn't about `/proc/sys` via `proc_sysctl`; the question's about `proc_create_data`, which is *not* typically used for the `/proc/sys` hierarchy. So, I need to step back. Is there any scenario where `proc_create_data` *could* create a writable file for an unprivileged user?
If the mode were 0666, then yes, everyone could write. But the question explicitly mentions 0644. If the user isn't the owner or in the group, write access would depend on the "others" bit being set, which it isn't in 0644.
Now, what about `CAP_DAC_OVERRIDE`? Remember that capability's behavior within a user namespace. The unprivileged user couldn't map host UID 0, so `CAP_DAC_OVERRIDE` wouldn't help. Hold on, could they map host UID 0? Only if they were root on the host, but the question says *unprivileged* user. So, `CAP_DAC_OVERRIDE` is a dead end.
I should double-check for other mechanisms, such as `proc_set_user` being used. If the `write` handler of a kernel module calls `proc_create_data`? No, that's not how it works.
Aha! There is a potential exception. What if the user mounts `procfs` and the inodes are created with a different UID? Let me see, `proc_get_inode` uses `de->uid`. Is `de->uid` ever anything other than 0 for standard entries? Usually not, though...
Wait, I should confirm about `/proc/net`! Does `proc_create_data` get used there? Yes, it is. But I was seeing `proc_create_net_data` earlier. Some files in `/proc/net` can use `proc_create_data`. If they do, and they are namespaced, the PDE inherits the owner of the parent. In `proc_net_ns_init`, the parent's owner is set to the user creating the netns. This means the PDE is owned by the user. If the PDE is owned by the user, and the mode is 0644, the user *can* write to it!
So, the answer depends on whether the file is "namespaced". If global, like `/proc/sysrq-trigger`, then No. If namespaced, like something in `/proc/net`, then Yes.
The question is, "Can an unprivileged user... write to a procfs file created with `proc_create_data` and mode 0644?". Since *some* files in specific scenarios can be written to, the answer has to be a qualified "Yes". The "Yes" is contingent on a namespaced file like those found in `/proc/net`. However, if the question is considering a general case, the more likely answer is "No".
Let me search for calls to `proc_create_data` with a non-null parent to find the relevant cases.
|
| 98/4 |
2026/06/01 17:45 |
tool |
grepper |
0m
Args: map[Expression:proc_create_data\(.*, .*, [^N].*, .*, .*\)]
Results: map[Output:arch/xtensa/platforms/iss/simdisk.c=268=static int __init simdisk_setup(struct simdisk *dev, int which,
--
arch/xtensa/platforms/iss/simdisk.c-297-
arch/xtensa/platforms/iss/simdisk.c:298: dev->procfile = proc_create_data(tmp, 0644, procdir, &simdisk_proc_ops, dev);
arch/xtensa/platforms/iss/simdisk.c-299-
--
fs/ntfs3/super.c=576=static void ntfs_create_procdir(struct super_block *sb)
--
fs/ntfs3/super.c-586-
fs/ntfs3/super.c:587: proc_create_data("volinfo", 0444, e, &ntfs3_volinfo_fops, sb);
fs/ntfs3/super.c:588: proc_create_data("label", 0644, e, &ntfs3_label_fops, sb);
fs/ntfs3/super.c-589- sbi->procdir = e;
--
fs/proc/generic.c=600=struct proc_dir_entry *proc_create(const char *name, umode_t mode,
--
fs/proc/generic.c-603-{
fs/proc/generic.c:604: return proc_create_data(name, mode, parent, proc_ops, NULL);
fs/proc/generic.c-605-}
--
kernel/irq/proc.c=331=void register_irq_proc(unsigned int irq, struct irq_desc *desc)
--
kernel/irq/proc.c-362- /* create /proc/irq/<irq>/smp_affinity */
kernel/irq/proc.c:363: proc_create_data("smp_affinity", umode, desc->dir, &irq_affinity_proc_ops, irqp);
kernel/irq/proc.c-364-
--
net/sunrpc/stats.c=287=do_register(struct net *net, const char *name, void *data,
--
net/sunrpc/stats.c-293- sn = net_generic(net, sunrpc_net_id);
net/sunrpc/stats.c:294: return proc_create_data(name, 0, sn->proc_net_rpc, proc_ops, data);
net/sunrpc/stats.c-295-}
]
|
| 99/4 |
2026/06/01 17:45 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 42014
output: 37
thoughts: 84
Thoughts: **Analyzing the RPC Statistics Path**
Okay, so I'm looking at this `net/sunrpc/stats.c` code and I see this `proc_create_data` call. Specifically, line 294 is creating something called `name` under `sn->proc_net_rpc`, which, as a seasoned pro, I immediately recognize as being somewhere under the `/proc/net` filesystem. My immediate instinct is to get a clearer picture of the code. Let's trace back: I need to understand where and how this `proc_net_rpc` is actually getting created. I need to know the origin of the node under which these RPC statistics are being exposed. Let's see...
|
| 100/4 |
2026/06/01 17:45 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:net/sunrpc/stats.c Name:rpc_proc_init]
Results: map[SourceCode: 331: int rpc_proc_init(struct net *net)
332: {
333: struct sunrpc_net *sn;
334:
335: dprintk("RPC: registering /proc/net/rpc\n");
336: sn = net_generic(net, sunrpc_net_id);
337: sn->proc_net_rpc = proc_mkdir("rpc", net->proc_net);
338: if (sn->proc_net_rpc == NULL)
339: return -ENOMEM;
340:
341: return 0;
342: }
SourceFile:net/sunrpc/stats.c]
|
| 101/4 |
2026/06/01 17:45 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 42497
output: 27
thoughts: 3911
Thoughts: **My Analysis of `procfs` Permissions in User Namespaces**
Okay, so I've been given a scenario about an unprivileged user in a user namespace attempting to write to a procfs file created with `proc_create_data` and a mode of 0644, and I need to figure out if it's possible. Let's break this down systematically.
First, I recall that `proc_create_data` creates a file in a namespaced directory like `/proc/net`, assuming a `net` object is the starting point. So, the ownership of this file will be tied to the namespaced directory where it's created, which is managed by `net->proc_net`. If the user owns the network namespace, the file would be owned by the user. If the file has mode 0644, theoretically, the user *could* write to it. However, the critical point is that the *namespacing* plays a vital role.
So, let's explore if this is possible at all, and then try to understand when it's possible, given that user namespaces are in play.
If a user mounts a new `procfs`, they are typically creating a new PID namespace. This is the normal behaviour in this type of environment. If they also create a new network namespace, then `/proc/net` would be owned by them, and any files there would be writable if the mode is correct.
However, if the user only creates a user namespace and a PID namespace, and doesn't create a new network namespace, then `/proc/net` is still owned by the *initial* network namespace's root user, which is `GLOBAL_ROOT_UID`. This is the fundamental issue here. The namespace needs to be specifically changed.
Thus, the answer becomes a clear conditional: Yes, if the file is created in a namespaced portion of procfs (like `/proc/net`) and the user owns that namespace. But in the more typical case, No, if it's a global file.
So, the question is: can they write to the file? If the user only created a user namespace, and mounts procfs? Then `/proc/net` is owned by `GLOBAL_ROOT_UID`.
Okay, so, let's think about this: when a new procfs is mounted, its user namespace becomes the user's namespace. The `s_user_ns` field in the super block is set to the user namespace of the PID namespace. The inodes themselves, however, have their UID set to `GLOBAL_ROOT_UID`.
The only entries that would have a UID *other* than host root would be ones that specifically called `proc_set_user`. But, this won't happen.
So, for files created with `proc_create_data`, they are almost always owned by `GLOBAL_ROOT_UID`, unless they are in a namespaced directory, and the user owns that namespace. The question is a very *particular* scenario: what happens if the user creates *just* a userns, and a PID namespace, then attempts to interact with procfs. In this case, it is very clear that they don't have any special privileges, but they're still in the initial network namespace.
Now, a critical detail has become apparent: even if the user maps their UID to 0 *within* the user namespace (which they often do when setting up a user namespace), and they mount a new `procfs`, they still *cannot* write to files that are owned by the host root. This is a very common scenario.
What happens is:
1. The user's namespace gets mapped to the procfs.
2. `inode_permission` is called.
3. The VFS checks the UID, using `i_user_ns(inode)`. The user namespace now controls the procfs permissions, not the host's, because of the new mount.
4. `i_user_ns(inode)` returns the user's userns, but the file's UID, as seen by the filesystem, is `GLOBAL_ROOT_UID`.
5. `from_kuid(user_userns, GLOBAL_ROOT_UID)` will return `(uid_t)-1`, meaning that the UID has no valid mapping within the namespace.
6. The `HAS_UNMAPPED_ID` macro is evaluated to be `true`.
7. The user's write is rejected, regardless of mode!
The `HAS_UNMAPPED_ID` check specifically prevents writing to files where the UID isn't mapped, even if the file mode allows write access. This behavior seems like a security feature, preventing issues when writing files back to the disk.
This means that an unprivileged user in their
|
| 102/4 |
2026/06/01 17:45 |
tool |
grepper |
0m
Args: map[Expression:MAY_WRITE PathPrefix:fs/proc/]
Results: map[Output:fs/proc/proc_sysctl.c=425=static int test_perm(int mode, int op)
--
fs/proc/proc_sysctl.c-430- mode >>= 3;
fs/proc/proc_sysctl.c:431: if ((op & ~mode & (MAY_READ|MAY_WRITE|MAY_EXEC)) == 0)
fs/proc/proc_sysctl.c-432- return 0;
--
fs/proc/proc_sysctl.c=553=static ssize_t proc_sys_call_handler(struct kiocb *iocb, struct iov_iter *iter,
--
fs/proc/proc_sysctl.c-570- error = -EPERM;
fs/proc/proc_sysctl.c:571: if (sysctl_perm(head, table, write ? MAY_WRITE : MAY_READ))
fs/proc/proc_sysctl.c-572- goto out;
--
fs/proc/proc_sysctl.c=792=static int proc_sys_permission(struct mnt_idmap *idmap,
--
fs/proc/proc_sysctl.c-812- if (!table) /* global root - r-xr-xr-x */
fs/proc/proc_sysctl.c:813: error = mask & MAY_WRITE ? -EACCES : 0;
fs/proc/proc_sysctl.c-814- else /* Use the permissions on the sysctl table entry */
]
|
| 103/4 |
2026/06/01 17:45 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 47849
output: 42
thoughts: 2655
Thoughts: **My Analysis of `procfs` File Write Permissions in User Namespaces**
Okay, so I'm diving into this `procfs` write permission question. My initial thought is that only `proc_sysctl.c` uses `MAY_WRITE` explicitly, but I should verify if PID-related permissions in `fs/proc/base.c` have any impact. No, they don't use `proc_create_data`, and the answer seems like a solid **No** for host root-owned files created with `proc_create_data`, which is the default.
The question asks a general case, so I need to make sure there are no exceptions. The documentation focuses on a new `procfs` mount in a user namespace, along with a mapping of their UID to 0 in that namespace. Is there any scenario where `proc_create_data` creates a user-owned file? Yes, but only in the context of namespaced parents, if I recall.
If I say "No," I have to explain why, and if I say "Yes," I need to provide an example. I just had a thought: what if the user maps UID 0? I keep saying they can't write, but what if they are using `newuidmap`? That allows unprivileged users to map UIDs from `/etc/subuid`. UID 0 isn't typically assigned to unprivileged users, so that edge case doesn't apply. Host UID 0 remains unmapped.
Next, I need to confirm if `proc_create_data` is used for `/proc/net/rpc/...` files, as these *are* writable by the user in a new netns. However, the initial question implies a general case - it doesn't state they *must* have a new netns. Even if they have permission, does the write operation actually do anything? That depends on `proc_ops->write`. Since the question is about *ability*, I'll assume standard, global files. So, No.
I should check the relevant documentation. `Documentation/userspace-api/unshare.rst` and the `man user_namespaces` page are great resources. They explain how files without a mapping in the user namespace appear owned by the overflow UID. And with `procfs` mounted in a userns, the userns owns the filesystem. The process's host credentials are mapped into the userns. A host UID 1000 maps to userns UID 0. The file's host UID 0 is NOT mapped to the userns. So, the file's UID in the userns is `overflowuid`, and the process doesn't own it. The permissions will be from the "others" class. A mode of 0644 means "others" has read but not write access. Thus, No.
What about `CAP_DAC_OVERRIDE`? The documentation clarifies that a process is privileged with respect to a file if its user namespace is the same as the user namespace that owns the filesystem and if it has the capability. If the userns *does* own the filesystem, and the process *does* have `CAP_DAC_OVERRIDE` in that userns, will this work? I need to check `capable_wrt_inode_uidgid` and `privileged_wrt_inode_uidgid` again. Specifically, `vfsuid_has_mapping` is crucial. If the inode's UID isn't mapped in the userns, `vfsuid_has_mapping` returns false. Therefore, `CAP_DAC_OVERRIDE` doesn't work.
This confirms the "No" answer for global files. Does procfs have any exception? Some filesystems may bypass `generic_permission`, but procfs doesn't. And what about `proc_setattr`? Can the user chmod or chown the file? `proc_setattr` calls `setattr_prepare`, which in turn checks owner or `CAP_FOWNER`. `CAP_FOWNER` uses `capable_wrt_inode_uidgid` as well, so you can't chown. So the answer for global files is still **No**.
So, if the kernel creates the file with `proc_create_data` and a mode of 0644, and it's in a global directory, an unprivileged user in a userns can't write to it. Does it change if the file is created *after* userns creation? Since `proc_create_data` is a kernel function, even if a kernel module is triggered (say, from within the userns), it still follows the same logic unless it explicitly calls `proc_set_user`. I'd have to check for any kernel modules that do this.
|
| 104/4 |
2026/06/01 17:46 |
tool |
grepper |
0m
Error:
Args: map[Expression:proc_create_data\(.*, .*, .*, .*, .*\) PathPrefix:net/ipv4/]
Results:
|
| 105/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 51584
output: 30
thoughts: 22
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Troubleshooting a Grep Query**
Alright, that's odd. Zero matches? I'm pretty certain I should be seeing *something* with that pattern. Hmm, did I botch the syntax? A misplaced flag, maybe? Or did I target the wrong files entirely? Let's back up and strip this down to the bare essentials. Forget trying to be clever right now; I need to isolate the problem. Let's start with a ridiculously basic `grep` call. Simplify the pattern to something unambiguous, almost trivially simple, and confirm that the basic mechanics of the search are working as expected. Gotta start with the fundamentals before assuming some complex interaction or edge case is the issue.
|
| 106/4 |
2026/06/01 17:46 |
tool |
grepper |
0m
Error:
Args: map[Expression:proc_create_data PathPrefix:net/ipv4/]
Results:
|
| 107/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 51812
output: 35
thoughts: 19
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Kernel Routing Inquiry**
Wait, hold on a second... is that actually what's happening? I need to verify that. My immediate instinct is to dive into the kernel code to confirm this behavior. Let's see... the most likely place to start would be in the IPv4 routing implementation. I'll need to double-check the logic within `net/ipv4/route.c`. That should contain the core routing decision-making functions and data structures. I need to understand how the kernel is handling this particular scenario.
|
| 108/4 |
2026/06/01 17:46 |
tool |
read-file |
0m
Args: map[File:net/ipv4/route.c FirstLine:1 LineCount:100]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0-or-later
2: /*
3: * INET An implementation of the TCP/IP protocol suite for the LINUX
4: * operating system. INET is implemented using the BSD Socket
5: * interface as the means of communication with the user level.
6: *
7: * ROUTE - implementation of the IP router.
8: *
9: * Authors: Ross Biro
10: * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
11: * Alan Cox, <gw4pts@gw4pts.ampr.org>
12: * Linus Torvalds, <Linus.Torvalds@helsinki.fi>
13: * Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
14: *
15: * Fixes:
16: * Alan Cox : Verify area fixes.
17: * Alan Cox : cli() protects routing changes
18: * Rui Oliveira : ICMP routing table updates
19: * (rco@di.uminho.pt) Routing table insertion and update
20: * Linus Torvalds : Rewrote bits to be sensible
21: * Alan Cox : Added BSD route gw semantics
22: * Alan Cox : Super /proc >4K
23: * Alan Cox : MTU in route table
24: * Alan Cox : MSS actually. Also added the window
25: * clamper.
26: * Sam Lantinga : Fixed route matching in rt_del()
27: * Alan Cox : Routing cache support.
28: * Alan Cox : Removed compatibility cruft.
29: * Alan Cox : RTF_REJECT support.
30: * Alan Cox : TCP irtt support.
31: * Jonathan Naylor : Added Metric support.
32: * Miquel van Smoorenburg : BSD API fixes.
33: * Miquel van Smoorenburg : Metrics.
34: * Alan Cox : Use __u32 properly
35: * Alan Cox : Aligned routing errors more closely with BSD
36: * our system is still very different.
37: * Alan Cox : Faster /proc handling
38: * Alexey Kuznetsov : Massive rework to support tree based routing,
39: * routing caches and better behaviour.
40: *
41: * Olaf Erb : irtt wasn't being copied right.
42: * Bjorn Ekwall : Kerneld route support.
43: * Alan Cox : Multicast fixed (I hope)
44: * Pavel Krauz : Limited broadcast fixed
45: * Mike McLagan : Routing by source
46: * Alexey Kuznetsov : End of old history. Split to fib.c and
47: * route.c and rewritten from scratch.
48: * Andi Kleen : Load-limit warning messages.
49: * Vitaly E. Lavrov : Transparent proxy revived after year coma.
50: * Vitaly E. Lavrov : Race condition in ip_route_input_slow.
51: * Tobias Ringstrom : Uninitialized res.type in ip_route_output_slow.
52: * Vladimir V. Ivanov : IP rule info (flowid) is really useful.
53: * Marc Boucher : routing by fwmark
54: * Robert Olsson : Added rt_cache statistics
55: * Arnaldo C. Melo : Convert proc stuff to seq_file
56: * Eric Dumazet : hashed spinlocks and rt_check_expire() fixes.
57: * Ilia Sotnikov : Ignore TOS on PMTUD and Redirect
58: * Ilia Sotnikov : Removed TOS from hash calculations
59: */
60:
61: #define pr_fmt(fmt) "IPv4: " fmt
62:
63: #include <linux/module.h>
64: #include <linux/bitops.h>
65: #include <linux/kernel.h>
66: #include <linux/mm.h>
67: #include <linux/memblock.h>
68: #include <linux/socket.h>
69: #include <linux/errno.h>
70: #include <linux/in.h>
71: #include <linux/inet.h>
72: #include <linux/netdevice.h>
73: #include <linux/proc_fs.h>
74: #include <linux/init.h>
75: #include <linux/skbuff.h>
76: #include <linux/inetdevice.h>
77: #include <linux/igmp.h>
78: #include <linux/pkt_sched.h>
79: #include <linux/mroute.h>
80: #include <linux/netfilter_ipv4.h>
81: #include <linux/random.h>
82: #include <linux/rcupdate.h>
83: #include <linux/slab.h>
84: #include <linux/jhash.h>
85: #include <net/dst.h>
86: #include <net/dst_metadata.h>
87: #include <net/flow.h>
88: #include <net/inet_dscp.h>
89: #include <net/net_namespace.h>
90: #include <net/ip.h>
91: #include <net/route.h>
92: #include <net/inetpeer.h>
93: #include <net/sock.h>
94: #include <net/ip_fib.h>
95: #include <net/nexthop.h>
96: #include <net/tcp.h>
97: #include <net/icmp.h>
98: #include <net/xfrm.h>
99: #include <net/lwtunnel.h>
100: #include <net/netevent.h>
]
|
| 109/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 53759
output: 28
thoughts: 18
Thoughts: Okay, here's my summarized thought process, presented as if I were thinking it:
**Navigating the Linux Kernel's IPv4 Network Stack**
Alright, I need to pinpoint the use of `proc_create` within the IPv4 networking code. Given my understanding of how the kernel organizes its functionality, my instinct is to start within the `net/ipv4/` directory. That's the logical place to begin my search for any relevant implementations related to creating `/proc` entries for IPv4-specific features or statistics. I'll launch a focused search for `proc_create` within that particular file system location. This should allow me to narrow down the possible locations quickly and efficiently.
|
| 110/4 |
2026/06/01 17:46 |
tool |
grepper |
0m
Args: map[Expression:proc_create PathPrefix:net/ipv4/]
Results: map[Output:net/ipv4/arp.c=1496=static int __net_init arp_net_init(struct net *net)
net/ipv4/arp.c-1497-{
net/ipv4/arp.c:1498: if (!proc_create_net("arp", 0444, net->proc_net, &arp_seq_ops,
net/ipv4/arp.c-1499- sizeof(struct neigh_seq_state)))
--
net/ipv4/fib_trie.c=3010=int __net_init fib_proc_init(struct net *net)
net/ipv4/fib_trie.c-3011-{
net/ipv4/fib_trie.c:3012: if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
net/ipv4/fib_trie.c-3013- sizeof(struct fib_trie_iter)))
--
net/ipv4/fib_trie.c-3015-
net/ipv4/fib_trie.c:3016: if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
net/ipv4/fib_trie.c-3017- fib_triestat_seq_show, NULL))
--
net/ipv4/fib_trie.c-3019-
net/ipv4/fib_trie.c:3020: if (!proc_create_net("route", 0444, net->proc_net, &fib_route_seq_ops,
net/ipv4/fib_trie.c-3021- sizeof(struct fib_route_iter)))
--
net/ipv4/igmp.c=3126=static int __net_init igmp_net_init(struct net *net)
--
net/ipv4/igmp.c-3130-
net/ipv4/igmp.c:3131: pde = proc_create_net("igmp", 0444, net->proc_net, &igmp_mc_seq_ops,
net/ipv4/igmp.c-3132- sizeof(struct igmp_mc_iter_state));
--
net/ipv4/igmp.c-3134- goto out_igmp;
net/ipv4/igmp.c:3135: pde = proc_create_net("mcfilter", 0444, net->proc_net,
net/ipv4/igmp.c-3136- &igmp_mcf_seq_ops, sizeof(struct igmp_mcf_iter_state));
--
net/ipv4/ipconfig.c=1364=static int ipconfig_proc_net_create(const char *name,
--
net/ipv4/ipconfig.c-1376-
net/ipv4/ipconfig.c:1377: p = proc_create(pname, 0444, init_net.proc_net, proc_ops);
net/ipv4/ipconfig.c-1378- kfree(pname);
--
net/ipv4/ipconfig.c=1471=static int __init ip_auto_config(void)
--
net/ipv4/ipconfig.c-1489-#ifdef CONFIG_PROC_FS
net/ipv4/ipconfig.c:1490: proc_create_single("pnp", 0444, init_net.proc_net, pnp_seq_show);
net/ipv4/ipconfig.c-1491-
--
net/ipv4/ipmr.c=3299=static int __net_init ipmr_net_init(struct net *net)
--
net/ipv4/ipmr.c-3315- err = -ENOMEM;
net/ipv4/ipmr.c:3316: if (!proc_create_net("ip_mr_vif", 0, net->proc_net, &ipmr_vif_seq_ops,
net/ipv4/ipmr.c-3317- sizeof(struct mr_vif_iter)))
net/ipv4/ipmr.c-3318- goto proc_vif_fail;
net/ipv4/ipmr.c:3319: if (!proc_create_net("ip_mr_cache", 0, net->proc_net, &ipmr_mfc_seq_ops,
net/ipv4/ipmr.c-3320- sizeof(struct mr_mfc_iter)))
--
net/ipv4/ping.c=1132=static int __net_init ping_v4_proc_init_net(struct net *net)
net/ipv4/ping.c-1133-{
net/ipv4/ping.c:1134: if (!proc_create_net("icmp", 0444, net->proc_net, &ping_v4_seq_ops,
net/ipv4/ping.c-1135- sizeof(struct ping_iter_state)))
--
net/ipv4/proc.c=519=static __net_init int ip_proc_init_net(struct net *net)
net/ipv4/proc.c-520-{
net/ipv4/proc.c:521: if (!proc_create_net_single("sockstat", 0444, net->proc_net,
net/ipv4/proc.c-522- sockstat_seq_show, NULL))
net/ipv4/proc.c-523- goto out_sockstat;
net/ipv4/proc.c:524: if (!proc_create_net_single("netstat", 0444, net->proc_net,
net/ipv4/proc.c-525- netstat_seq_show, NULL))
net/ipv4/proc.c-526- goto out_netstat;
net/ipv4/proc.c:527: if (!proc_create_net_single("snmp", 0444, net->proc_net, snmp_seq_show,
net/ipv4/proc.c-528- NULL))
--
net/ipv4/raw.c=1073=static __net_init int raw_init_net(struct net *net)
net/ipv4/raw.c-1074-{
net/ipv4/raw.c:1075: if (!proc_create_net_data("raw", 0444, net->proc_net, &raw_seq_ops,
net/ipv4/raw.c-1076- sizeof(struct raw_iter_state), &raw_v4_hashinfo))
--
net/ipv4/route.c=338=static int __net_init ip_rt_do_proc_init(struct net *net)
--
net/ipv4/route.c-341-
net/ipv4/route.c:342: pde = proc_create_seq("rt_cache", 0444, net->proc_net,
net/ipv4/route.c-343- &rt_cache_seq_ops);
--
net/ipv4/route.c-346-
net/ipv4/route.c:347: pde = proc_create_seq("rt_cache", 0444, net->proc_net_stat,
net/ipv4/route.c-348- &rt_cpu_seq_ops);
--
net/ipv4/route.c-352-#ifdef CONFIG_IP_ROUTE_CLASSID
net/ipv4/route.c:353: pde = proc_create_single("rt_acct", 0, net->proc_net,
net/ipv4/route.c-354- rt_acct_proc_show);
--
net/ipv4/tcp_ipv4.c=3306=static int __net_init tcp4_proc_init_net(struct net *net)
net/ipv4/tcp_ipv4.c-3307-{
net/ipv4/tcp_ipv4.c:3308: if (!proc_create_net_data("tcp", 0444, net->proc_net, &tcp4_seq_ops,
net/ipv4/tcp_ipv4.c-3309- sizeof(struct tcp_iter_state), &tcp4_seq_afinfo))
--
net/ipv4/udp.c=3582=static int __net_init udp4_proc_init_net(struct net *net)
net/ipv4/udp.c-3583-{
net/ipv4/udp.c:3584: if (!proc_create_net_data("udp", 0444, net->proc_net, &udp_seq_ops,
net/ipv4/udp.c-3585- sizeof(struct udp_iter_state), &udp4_seq_afinfo))
]
|
| 111/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 56241
output: 26
thoughts: 149
Thoughts: **Analyzing `/proc/net` Permissions**
Okay, so I'm looking through these kernel files related to network interfaces and, as expected, a lot of the entries in `/proc/net` are created using `proc_create_net` or `proc_create_net_data`. And, of course, the default permissions tend to be `0444`. I mean, that's just standard practice for read-only information, right?
Wait a minute...hold on...I just spotted something in `net/ipv4/ipmr.c` at line 3316. It's using `proc_create_net` with a permission of `0`! Now that's interesting because the rule of thumb is that zero often gets implicitly translated to `0444`.
So now I have to ask myself, are there any files in `/proc/net` with actual `0644` permissions? I have a hunch that something could be awry here, and I need to check. Time to run a quick search for `0644` within the `net/` directory and see what pops up. Gotta find those writeable network files, if they exist.
|
| 112/4 |
2026/06/01 17:46 |
tool |
grepper |
0m
Args: map[Expression:0644 PathPrefix:net/]
Results: map[Output:
Full output is too long, showing 500 out of 2794 lines.
Use more precise expression if possible.
net/6lowpan/debugfs.c=166=static void lowpan_dev_debugfs_ctx_init(struct net_device *dev,
--
net/6lowpan/debugfs.c-179-
net/6lowpan/debugfs.c:180: debugfs_create_file("active", 0644, root, &ldev->ctx.table[id],
net/6lowpan/debugfs.c-181- &lowpan_ctx_flag_active_fops);
net/6lowpan/debugfs.c-182-
net/6lowpan/debugfs.c:183: debugfs_create_file("compression", 0644, root, &ldev->ctx.table[id],
net/6lowpan/debugfs.c-184- &lowpan_ctx_flag_c_fops);
net/6lowpan/debugfs.c-185-
net/6lowpan/debugfs.c:186: debugfs_create_file("prefix", 0644, root, &ldev->ctx.table[id],
net/6lowpan/debugfs.c-187- &lowpan_ctx_pfx_fops);
net/6lowpan/debugfs.c-188-
net/6lowpan/debugfs.c:189: debugfs_create_file("prefix_len", 0644, root, &ldev->ctx.table[id],
net/6lowpan/debugfs.c-190- &lowpan_ctx_plen_fops);
--
net/6lowpan/debugfs.c=245=void lowpan_dev_debugfs_init(struct net_device *dev)
--
net/6lowpan/debugfs.c-255-
net/6lowpan/debugfs.c:256: debugfs_create_file("show", 0644, contexts, &lowpan_dev(dev)->ctx,
net/6lowpan/debugfs.c-257- &lowpan_context_fops);
--
net/802/garp.c=21=static unsigned int garp_join_time __read_mostly = 200;
net/802/garp.c:22:module_param(garp_join_time, uint, 0644);
net/802/garp.c-23-MODULE_PARM_DESC(garp_join_time, "Join time in ms (default 200ms)");
--
net/802/mrp.c=21=static unsigned int mrp_join_time __read_mostly = 200;
net/802/mrp.c:22:module_param(mrp_join_time, uint, 0644);
net/802/mrp.c-23-MODULE_PARM_DESC(mrp_join_time, "Join time in ms (default 200ms)");
--
net/802/mrp.c=25=static unsigned int mrp_periodic_time __read_mostly = 1000;
net/802/mrp.c:26:module_param(mrp_periodic_time, uint, 0644);
net/802/mrp.c-27-MODULE_PARM_DESC(mrp_periodic_time, "Periodic time in ms (default 1s)");
--
net/appletalk/sysctl_net_atalk.c=14=static struct ctl_table atalk_table[] = {
--
net/appletalk/sysctl_net_atalk.c-18- .maxlen = sizeof(int),
net/appletalk/sysctl_net_atalk.c:19: .mode = 0644,
net/appletalk/sysctl_net_atalk.c-20- .proc_handler = proc_dointvec_jiffies,
--
net/appletalk/sysctl_net_atalk.c-25- .maxlen = sizeof(int),
net/appletalk/sysctl_net_atalk.c:26: .mode = 0644,
net/appletalk/sysctl_net_atalk.c-27- .proc_handler = proc_dointvec_jiffies,
--
net/appletalk/sysctl_net_atalk.c-32- .maxlen = sizeof(int),
net/appletalk/sysctl_net_atalk.c:33: .mode = 0644,
net/appletalk/sysctl_net_atalk.c-34- .proc_handler = proc_dointvec,
--
net/appletalk/sysctl_net_atalk.c-39- .maxlen = sizeof(int),
net/appletalk/sysctl_net_atalk.c:40: .mode = 0644,
net/appletalk/sysctl_net_atalk.c-41- .proc_handler = proc_dointvec_jiffies,
--
net/batman-adv/bat_algo.c=147=module_param_cb(routing_algo, &batadv_param_ops_ra, &batadv_param_string_ra,
net/batman-adv/bat_algo.c:148: 0644);
net/batman-adv/bat_algo.c-149-
--
net/bluetooth/6lowpan.c=1300=static int __init bt_6lowpan_init(void)
--
net/bluetooth/6lowpan.c-1302- lowpan_enable_debugfs = debugfs_create_file_unsafe("6lowpan_enable",
net/bluetooth/6lowpan.c:1303: 0644, bt_debugfs,
net/bluetooth/6lowpan.c-1304- NULL,
net/bluetooth/6lowpan.c-1305- &lowpan_enable_fops);
net/bluetooth/6lowpan.c:1306: lowpan_control_debugfs = debugfs_create_file("6lowpan_control", 0644,
net/bluetooth/6lowpan.c-1307- bt_debugfs, NULL,
--
net/bluetooth/bnep/core.c=764=module_exit(bnep_exit);
net/bluetooth/bnep/core.c-765-
net/bluetooth/bnep/core.c:766:module_param(compress_src, bool, 0644);
net/bluetooth/bnep/core.c-767-MODULE_PARM_DESC(compress_src, "Compress sources headers");
net/bluetooth/bnep/core.c-768-
net/bluetooth/bnep/core.c:769:module_param(compress_dst, bool, 0644);
net/bluetooth/bnep/core.c-770-MODULE_PARM_DESC(compress_dst, "Compress destination headers");
--
net/bluetooth/hci_debugfs.c=315=void hci_debugfs_create_common(struct hci_dev *hdev)
--
net/bluetooth/hci_debugfs.c-337-
net/bluetooth/hci_debugfs.c:338: debugfs_create_file("conn_info_min_age", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-339- &conn_info_min_age_fops);
net/bluetooth/hci_debugfs.c:340: debugfs_create_file("conn_info_max_age", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-341- &conn_info_max_age_fops);
--
net/bluetooth/hci_debugfs.c=629=void hci_debugfs_create_bredr(struct hci_dev *hdev)
--
net/bluetooth/hci_debugfs.c-647- if (!lmp_sc_capable(hdev))
net/bluetooth/hci_debugfs.c:648: debugfs_create_file("force_bredr_smp", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-649- hdev, &force_bredr_smp_fops);
--
net/bluetooth/hci_debugfs.c-653- hdev, &ssp_debug_mode_fops);
net/bluetooth/hci_debugfs.c:654: debugfs_create_file("min_encrypt_key_size", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-655- hdev, &min_encrypt_key_size_fops);
net/bluetooth/hci_debugfs.c:656: debugfs_create_file("auto_accept_delay", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-657- hdev, &auto_accept_delay_fops);
--
net/bluetooth/hci_debugfs.c-660- if (lmp_sniff_capable(hdev)) {
net/bluetooth/hci_debugfs.c:661: debugfs_create_file("idle_timeout", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-662- hdev, &idle_timeout_fops);
net/bluetooth/hci_debugfs.c:663: debugfs_create_file("sniff_min_interval", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-664- hdev, &sniff_min_interval_fops);
net/bluetooth/hci_debugfs.c:665: debugfs_create_file("sniff_max_interval", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-666- hdev, &sniff_max_interval_fops);
--
net/bluetooth/hci_debugfs.c=1198=void hci_debugfs_create_le(struct hci_dev *hdev)
--
net/bluetooth/hci_debugfs.c-1201- &identity_fops);
net/bluetooth/hci_debugfs.c:1202: debugfs_create_file("rpa_timeout", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1203- &rpa_timeout_fops);
--
net/bluetooth/hci_debugfs.c-1213- if (bacmp(&hdev->bdaddr, BDADDR_ANY))
net/bluetooth/hci_debugfs.c:1214: debugfs_create_file("force_static_address", 0644,
net/bluetooth/hci_debugfs.c-1215- hdev->debugfs, hdev,
--
net/bluetooth/hci_debugfs.c-1229- &long_term_keys_fops);
net/bluetooth/hci_debugfs.c:1230: debugfs_create_file("conn_min_interval", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1231- &conn_min_interval_fops);
net/bluetooth/hci_debugfs.c:1232: debugfs_create_file("conn_max_interval", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1233- &conn_max_interval_fops);
net/bluetooth/hci_debugfs.c:1234: debugfs_create_file("conn_latency", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1235- &conn_latency_fops);
net/bluetooth/hci_debugfs.c:1236: debugfs_create_file("supervision_timeout", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1237- &supervision_timeout_fops);
net/bluetooth/hci_debugfs.c:1238: debugfs_create_file("adv_channel_map", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1239- &adv_channel_map_fops);
net/bluetooth/hci_debugfs.c:1240: debugfs_create_file("adv_min_interval", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1241- &adv_min_interval_fops);
net/bluetooth/hci_debugfs.c:1242: debugfs_create_file("adv_max_interval", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1243- &adv_max_interval_fops);
net/bluetooth/hci_debugfs.c:1244: debugfs_create_u16("discov_interleaved_timeout", 0644, hdev->debugfs,
net/bluetooth/hci_debugfs.c-1245- &hdev->discov_interleaved_timeout);
net/bluetooth/hci_debugfs.c:1246: debugfs_create_file("min_key_size", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1247- &min_key_size_fops);
net/bluetooth/hci_debugfs.c:1248: debugfs_create_file("max_key_size", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1249- &max_key_size_fops);
net/bluetooth/hci_debugfs.c:1250: debugfs_create_file("auth_payload_timeout", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1251- &auth_payload_timeout_fops);
net/bluetooth/hci_debugfs.c:1252: debugfs_create_file("force_no_mitm", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1253- &force_no_mitm_fops);
net/bluetooth/hci_debugfs.c-1254-
net/bluetooth/hci_debugfs.c:1255: debugfs_create_file("quirk_strict_duplicate_filter", 0644,
net/bluetooth/hci_debugfs.c-1256- hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1257- &quirk_strict_duplicate_filter_fops);
net/bluetooth/hci_debugfs.c:1258: debugfs_create_file("quirk_simultaneous_discovery", 0644,
net/bluetooth/hci_debugfs.c-1259- hdev->debugfs, hdev,
--
net/bluetooth/hci_debugfs.c=1387=void hci_debugfs_create_basic(struct hci_dev *hdev)
net/bluetooth/hci_debugfs.c-1388-{
net/bluetooth/hci_debugfs.c:1389: debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1390- &dut_mode_fops);
--
net/bluetooth/hci_debugfs.c-1392- if (hdev->set_diag)
net/bluetooth/hci_debugfs.c:1393: debugfs_create_file("vendor_diag", 0644, hdev->debugfs, hdev,
net/bluetooth/hci_debugfs.c-1394- &vendor_diag_fops);
--
net/bluetooth/l2cap_core.c=7824=void l2cap_exit(void)
--
net/bluetooth/l2cap_core.c-7830-
net/bluetooth/l2cap_core.c:7831:module_param(disable_ertm, bool, 0644);
net/bluetooth/l2cap_core.c-7832-MODULE_PARM_DESC(disable_ertm, "Disable enhanced retransmission mode");
net/bluetooth/l2cap_core.c-7833-
net/bluetooth/l2cap_core.c:7834:module_param(enable_ecred, bool, 0644);
net/bluetooth/l2cap_core.c-7835-MODULE_PARM_DESC(enable_ecred, "Enable enhanced credit flow control mode");
--
net/bluetooth/rfcomm/core.c=2274=module_exit(rfcomm_exit);
net/bluetooth/rfcomm/core.c-2275-
net/bluetooth/rfcomm/core.c:2276:module_param(disable_cfc, bool, 0644);
net/bluetooth/rfcomm/core.c-2277-MODULE_PARM_DESC(disable_cfc, "Disable credit based flow control");
net/bluetooth/rfcomm/core.c-2278-
net/bluetooth/rfcomm/core.c:2279:module_param(channel_mtu, int, 0644);
net/bluetooth/rfcomm/core.c-2280-MODULE_PARM_DESC(channel_mtu, "Default MTU for the RFCOMM channel");
net/bluetooth/rfcomm/core.c-2281-
net/bluetooth/rfcomm/core.c:2282:module_param(l2cap_ertm, bool, 0644);
net/bluetooth/rfcomm/core.c-2283-MODULE_PARM_DESC(l2cap_ertm, "Use L2CAP ERTM mode for connection");
--
net/bluetooth/sco.c=1629=void sco_exit(void)
--
net/bluetooth/sco.c-1641-
net/bluetooth/sco.c:1642:module_param(disable_esco, bool, 0644);
net/bluetooth/sco.c-1643-MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
--
net/bridge/br_netfilter_hooks.c=1180=static struct ctl_table brnf_table[] = {
--
net/bridge/br_netfilter_hooks.c-1183- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1184: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1185- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_netfilter_hooks.c-1189- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1190: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1191- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_netfilter_hooks.c-1195- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1196: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1197- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_netfilter_hooks.c-1201- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1202: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1203- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_netfilter_hooks.c-1207- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1208: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1209- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_netfilter_hooks.c-1213- .maxlen = sizeof(int),
net/bridge/br_netfilter_hooks.c:1214: .mode = 0644,
net/bridge/br_netfilter_hooks.c-1215- .proc_handler = brnf_sysctl_call_tables,
--
net/bridge/br_sysfs_if.c=52=static int store_##_name(struct net_bridge_port *p, unsigned long v) \
--
net/bridge/br_sysfs_if.c-55-} \
net/bridge/br_sysfs_if.c:56:static BRPORT_ATTR(_name, 0644, \
net/bridge/br_sysfs_if.c-57- show_##_name, store_##_name)
--
net/bridge/br_sysfs_if.c=84=static ssize_t show_path_cost(struct net_bridge_port *p, char *buf)
--
net/bridge/br_sysfs_if.c-88-
net/bridge/br_sysfs_if.c:89:static BRPORT_ATTR(path_cost, 0644,
net/bridge/br_sysfs_if.c-90- show_path_cost, br_stp_set_path_cost);
--
net/bridge/br_sysfs_if.c=92=static ssize_t show_priority(struct net_bridge_port *p, char *buf)
--
net/bridge/br_sysfs_if.c-96-
net/bridge/br_sysfs_if.c:97:static BRPORT_ATTR(priority, 0644,
net/bridge/br_sysfs_if.c-98- show_priority, br_stp_set_port_priority);
--
net/bridge/br_sysfs_if.c=188=static int store_group_fwd_mask(struct net_bridge_port *p,
--
net/bridge/br_sysfs_if.c-196-}
net/bridge/br_sysfs_if.c:197:static BRPORT_ATTR(group_fwd_mask, 0644, show_group_fwd_mask,
net/bridge/br_sysfs_if.c-198- store_group_fwd_mask);
--
net/bridge/br_sysfs_if.c=214=static int store_backup_port(struct net_bridge_port *p, char *buf)
--
net/bridge/br_sysfs_if.c-229-}
net/bridge/br_sysfs_if.c:230:static BRPORT_ATTR_RAW(backup_port, 0644, show_backup_port, store_backup_port);
net/bridge/br_sysfs_if.c-231-
--
net/bridge/br_sysfs_if.c=250=static int store_multicast_router(struct net_bridge_port *p,
--
net/bridge/br_sysfs_if.c-254-}
net/bridge/br_sysfs_if.c:255:static BRPORT_ATTR(multicast_router, 0644, show_multicast_router,
net/bridge/br_sysfs_if.c-256- store_multicast_router);
--
net/can/bcm.c=1670=static int bcm_connect(struct socket *sock, struct sockaddr_unsized *uaddr, int len,
--
net/can/bcm.c-1715- sprintf(bo->procname, "%llu", sock_i_ino(sk));
net/can/bcm.c:1716: bo->bcm_proc_read = proc_create_net_single(bo->procname, 0644,
net/can/bcm.c-1717- net->can.bcmproc_dir,
--
net/can/proc.c=439=void can_init_proc(struct net *net)
--
net/can/proc.c-450- /* own procfs entries from the AF_CAN core */
net/can/proc.c:451: net->can.pde_stats = proc_create_net_single(CAN_PROC_STATS, 0644,
net/can/proc.c-452- net->can.proc_dir, can_stats_proc_show, NULL);
net/can/proc.c-453- net->can.pde_reset_stats = proc_create_net_single(CAN_PROC_RESET_STATS,
net/can/proc.c:454: 0644, net->can.proc_dir, can_reset_stats_proc_show,
net/can/proc.c-455- NULL);
net/can/proc.c-456- net->can.pde_rcvlist_err = proc_create_net_single(CAN_PROC_RCVLIST_ERR,
net/can/proc.c:457: 0644, net->can.proc_dir, can_rcvlist_proc_show,
net/can/proc.c-458- (void *)RX_ERR);
net/can/proc.c-459- net->can.pde_rcvlist_all = proc_create_net_single(CAN_PROC_RCVLIST_ALL,
net/can/proc.c:460: 0644, net->can.proc_dir, can_rcvlist_proc_show,
net/can/proc.c-461- (void *)RX_ALL);
net/can/proc.c-462- net->can.pde_rcvlist_fil = proc_create_net_single(CAN_PROC_RCVLIST_FIL,
net/can/proc.c:463: 0644, net->can.proc_dir, can_rcvlist_proc_show,
net/can/proc.c-464- (void *)RX_FIL);
net/can/proc.c-465- net->can.pde_rcvlist_inv = proc_create_net_single(CAN_PROC_RCVLIST_INV,
net/can/proc.c:466: 0644, net->can.proc_dir, can_rcvlist_proc_show,
net/can/proc.c-467- (void *)RX_INV);
net/can/proc.c-468- net->can.pde_rcvlist_eff = proc_create_net_single(CAN_PROC_RCVLIST_EFF,
net/can/proc.c:469: 0644, net->can.proc_dir, can_rcvlist_eff_proc_show, NULL);
net/can/proc.c-470- net->can.pde_rcvlist_sff = proc_create_net_single(CAN_PROC_RCVLIST_SFF,
net/can/proc.c:471: 0644, net->can.proc_dir, can_rcvlist_sff_proc_show, NULL);
net/can/proc.c-472-}
--
net/core/neighbour.c=3741=static int neigh_proc_base_reachable_time(const struct ctl_table *ctl, int write,
--
net/core/neighbour.c-3777-#define NEIGH_SYSCTL_ZERO_INTMAX_ENTRY(attr, name) \
net/core/neighbour.c:3778: NEIGH_SYSCTL_ENTRY(attr, attr, name, 0644, neigh_proc_dointvec_zero_intmax)
net/core/neighbour.c-3779-
net/core/neighbour.c-3780-#define NEIGH_SYSCTL_JIFFIES_ENTRY(attr, name) \
net/core/neighbour.c:3781: NEIGH_SYSCTL_ENTRY(attr, attr, name, 0644, neigh_proc_dointvec_jiffies)
net/core/neighbour.c-3782-
net/core/neighbour.c-3783-#define NEIGH_SYSCTL_USERHZ_JIFFIES_ENTRY(attr, name) \
net/core/neighbour.c:3784: NEIGH_SYSCTL_ENTRY(attr, attr, name, 0644, neigh_proc_dointvec_userhz_jiffies)
net/core/neighbour.c-3785-
net/core/neighbour.c-3786-#define NEIGH_SYSCTL_MS_JIFFIES_POSITIVE_ENTRY(attr, name) \
net/core/neighbour.c:3787: NEIGH_SYSCTL_ENTRY(attr, attr, name, 0644, neigh_proc_dointvec_ms_jiffies_positive)
net/core/neighbour.c-3788-
net/core/neighbour.c-3789-#define NEIGH_SYSCTL_MS_JIFFIES_REUSED_ENTRY(attr, data_attr, name) \
net/core/neighbour.c:3790: NEIGH_SYSCTL_ENTRY(attr, data_attr, name, 0644, neigh_proc_dointvec_ms_jiffies)
net/core/neighbour.c-3791-
net/core/neighbour.c-3792-#define NEIGH_SYSCTL_UNRES_QLEN_REUSED_ENTRY(attr, data_attr, name) \
net/core/neighbour.c:3793: NEIGH_SYSCTL_ENTRY(attr, data_attr, name, 0644, neigh_proc_dointvec_unres_qlen)
net/core/neighbour.c-3794-
net/core/neighbour.c=3795=static struct neigh_sysctl_table {
--
net/core/neighbour.c-3820- .maxlen = sizeof(int),
net/core/neighbour.c:3821: .mode = 0644,
net/core/neighbour.c-3822- .proc_handler = proc_dointvec_jiffies,
--
net/core/neighbour.c-3826- .maxlen = sizeof(int),
net/core/neighbour.c:3827: .mode = 0644,
net/core/neighbour.c-3828- .extra1 = SYSCTL_ZERO,
--
net/core/neighbour.c-3834- .maxlen = sizeof(int),
net/core/neighbour.c:3835: .mode = 0644,
net/core/neighbour.c-3836- .extra1 = SYSCTL_ZERO,
--
net/core/neighbour.c-3842- .maxlen = sizeof(int),
net/core/neighbour.c:3843: .mode = 0644,
net/core/neighbour.c-3844- .extra1 = SYSCTL_ZERO,
--
net/core/net-sysfs.c=621=NETDEVICE_SHOW(group, fmt_dec);
net/core/net-sysfs.c:622:static DEVICE_ATTR(netdev_group, 0644, group_show, group_store);
net/core/net-sysfs.c-623-
--
net/core/net-sysfs.c=1130=static struct rx_queue_attribute rps_cpus_attribute __ro_after_init
net/core/net-sysfs.c:1131: = __ATTR(rps_cpus, 0644, show_rps_map, store_rps_map);
net/core/net-sysfs.c-1132-
net/core/net-sysfs.c=1133=static struct rx_queue_attribute rps_dev_flow_table_cnt_attribute __ro_after_init
net/core/net-sysfs.c:1134: = __ATTR(rps_flow_cnt, 0644,
net/core/net-sysfs.c-1135- show_rps_dev_flow_table_cnt, store_rps_dev_flow_table_cnt);
--
net/core/net-sysfs.c=1573=static struct netdev_queue_attribute bql_hold_time_attribute __ro_after_init
net/core/net-sysfs.c:1574: = __ATTR(hold_time, 0644,
net/core/net-sysfs.c-1575- bql_show_hold_time, bql_set_hold_time);
--
net/core/net-sysfs.c=1610=static struct netdev_queue_attribute bql_stall_thrs_attribute __ro_after_init =
net/core/net-sysfs.c:1611: __ATTR(stall_thrs, 0644, bql_show_stall_thrs, bql_set_stall_thrs);
net/core/net-sysfs.c-1612-
--
net/core/net-sysfs.c=1627=static struct netdev_queue_attribute bql_stall_max_attribute __ro_after_init =
net/core/net-sysfs.c:1628: __ATTR(stall_max, 0644, bql_show_stall_max, bql_set_stall_max);
net/core/net-sysfs.c-1629-
--
net/core/net-sysfs.c=1668=static struct netdev_queue_attribute bql_ ## NAME ## _attribute __ro_after_init \
net/core/net-sysfs.c:1669: = __ATTR(NAME, 0644, \
net/core/net-sysfs.c-1670- bql_show_ ## NAME, bql_set_ ## NAME)
--
net/core/netpoll.c=58=static unsigned int carrier_timeout = 4;
net/core/netpoll.c:59:module_param(carrier_timeout, uint, 0644);
net/core/netpoll.c-60-
--
net/core/sysctl_net_core.c=430=static struct ctl_table net_core_table[] = {
--
net/core/sysctl_net_core.c-434- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:435: .mode = 0644,
net/core/sysctl_net_core.c-436- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-442- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:443: .mode = 0644,
net/core/sysctl_net_core.c-444- .proc_handler = proc_do_dev_weight,
--
net/core/sysctl_net_core.c-450- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:451: .mode = 0644,
net/core/sysctl_net_core.c-452- .proc_handler = proc_do_dev_weight,
--
net/core/sysctl_net_core.c-458- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:459: .mode = 0644,
net/core/sysctl_net_core.c-460- .proc_handler = proc_do_dev_weight,
--
net/core/sysctl_net_core.c-466- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:467: .mode = 0644,
net/core/sysctl_net_core.c-468- .proc_handler = proc_dointvec
--
net/core/sysctl_net_core.c-473- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:474: .mode = 0644,
net/core/sysctl_net_core.c-475- .proc_handler = proc_dointvec
--
net/core/sysctl_net_core.c-488- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:489: .mode = 0644,
net/core/sysctl_net_core.c-490- .proc_handler = proc_dointvec_minmax_bpf_enable,
--
net/core/sysctl_net_core.c-532- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:533: .mode = 0644,
net/core/sysctl_net_core.c-534- .proc_handler = proc_dointvec
--
net/core/sysctl_net_core.c-539- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:540: .mode = 0644,
net/core/sysctl_net_core.c-541- .proc_handler = proc_dointvec_jiffies,
--
net/core/sysctl_net_core.c-546- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:547: .mode = 0644,
net/core/sysctl_net_core.c-548- .proc_handler = proc_dointvec,
--
net/core/sysctl_net_core.c-553- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:554: .mode = 0644,
net/core/sysctl_net_core.c-555- .proc_handler = rps_sock_flow_sysctl
--
net/core/sysctl_net_core.c-560- .procname = "flow_limit_cpu_bitmap",
net/core/sysctl_net_core.c:561: .mode = 0644,
net/core/sysctl_net_core.c-562- .proc_handler = flow_limit_cpu_sysctl
--
net/core/sysctl_net_core.c-567- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:568: .mode = 0644,
net/core/sysctl_net_core.c-569- .proc_handler = flow_limit_table_len_sysctl
--
net/core/sysctl_net_core.c-576- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:577: .mode = 0644,
net/core/sysctl_net_core.c-578- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-584- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:585: .mode = 0644,
net/core/sysctl_net_core.c-586- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-592- .procname = "default_qdisc",
net/core/sysctl_net_core.c:593: .mode = 0644,
net/core/sysctl_net_core.c-594- .maxlen = IFNAMSIZ,
--
net/core/sysctl_net_core.c-601- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:602: .mode = 0644,
net/core/sysctl_net_core.c-603- .proc_handler = proc_dointvec
--
net/core/sysctl_net_core.c-608- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:609: .mode = 0644,
net/core/sysctl_net_core.c-610- .proc_handler = proc_dointvec
--
net/core/sysctl_net_core.c-615- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:616: .mode = 0644,
net/core/sysctl_net_core.c-617- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-624- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:625: .mode = 0644,
net/core/sysctl_net_core.c-626- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-632- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:633: .mode = 0644,
net/core/sysctl_net_core.c-634- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-641- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:642: .mode = 0644,
net/core/sysctl_net_core.c-643- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-650- .maxlen = sizeof(net_high_order_alloc_disable_key),
net/core/sysctl_net_core.c:651: .mode = 0644,
net/core/sysctl_net_core.c-652- .proc_handler = proc_do_static_key,
--
net/core/sysctl_net_core.c-657- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:658: .mode = 0644,
net/core/sysctl_net_core.c-659- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-665- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:666: .mode = 0644,
net/core/sysctl_net_core.c-667- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-674- .maxlen = sizeof(unsigned int),
net/core/sysctl_net_core.c:675: .mode = 0644,
net/core/sysctl_net_core.c-676- .proc_handler = proc_do_skb_defer_max,
--
net/core/sysctl_net_core.c=681=static struct ctl_table netns_core_table[] = {
--
net/core/sysctl_net_core.c-685- .data = &init_net,
net/core/sysctl_net_core.c:686: .mode = 0644,
net/core/sysctl_net_core.c-687- .proc_handler = rps_default_mask_sysctl
--
net/core/sysctl_net_core.c-693- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:694: .mode = 0644,
net/core/sysctl_net_core.c-695- .extra1 = SYSCTL_ZERO,
--
net/core/sysctl_net_core.c-701- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:702: .mode = 0644,
net/core/sysctl_net_core.c-703- .extra1 = SYSCTL_ZERO,
--
net/core/sysctl_net_core.c-709- .maxlen = sizeof(u8),
net/core/sysctl_net_core.c:710: .mode = 0644,
net/core/sysctl_net_core.c-711- .extra1 = SYSCTL_ZERO,
--
net/core/sysctl_net_core.c-718- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:719: .mode = 0644,
net/core/sysctl_net_core.c-720- .proc_handler = proc_dointvec_ms_jiffies,
--
net/core/sysctl_net_core.c-725- .maxlen = sizeof(u8),
net/core/sysctl_net_core.c:726: .mode = 0644,
net/core/sysctl_net_core.c-727- .proc_handler = proc_dou8vec_minmax,
--
net/core/sysctl_net_core.c-734- .maxlen = sizeof(u8),
net/core/sysctl_net_core.c:735: .mode = 0644,
net/core/sysctl_net_core.c-736- .proc_handler = proc_dou8vec_minmax,
--
net/core/sysctl_net_core.c-746- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:747: .mode = 0644,
net/core/sysctl_net_core.c-748- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-754- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:755: .mode = 0644,
net/core/sysctl_net_core.c-756- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-762- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:763: .mode = 0644,
net/core/sysctl_net_core.c-764- .proc_handler = proc_dointvec_minmax,
--
net/core/sysctl_net_core.c-770- .maxlen = sizeof(int),
net/core/sysctl_net_core.c:771: .mode = 0644,
net/core/sysctl_net_core.c-772- .proc_handler = proc_dointvec_minmax,
--
net/dns_resolver/dns_key.c=29=unsigned int dns_resolver_debug;
net/dns_resolver/dns_key.c:30:module_param_named(debug, dns_resolver_debug, uint, 0644);
net/dns_resolver/dns_key.c-31-MODULE_PARM_DESC(debug, "DNS Resolver debugging mask");
--
net/ieee802154/6lowpan/reassembly.c=329=static struct ctl_table lowpan_frags_ns_ctl_table[] = {
--
net/ieee802154/6lowpan/reassembly.c-332- .maxlen = sizeof(unsigned long),
net/ieee802154/6lowpan/reassembly.c:333: .mode = 0644,
]
|
| 113/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 69285
output: 36
thoughts: 165
Thoughts: **Analyzing Potential Security Risks in CAN Network Module**
Okay, so I'm digging into these kernel module parameters and system control entries, and it's looking like the majority of them are defined as `sysctl` or `module_param`. That's good, generally, because I can usually assume `proc_sys_permission` is being used, which should, in theory, prevent unauthorized access β a solid starting point. However, I need to be thorough.
Wait a minute, I think I just stumbled on something interesting. I see a `proc_create_net_single` function call in `net/can/proc.c` and a permission of `0644`. Specifically, this line:
```c
net/can/proc.c:451: net->can.pde_stats = proc_create_net_single(CAN_PROC_STATS, 0644,
```
Okay, so that's the read and write permissions being set. I should be concerned. Let me see. These files are being created in `net->can.proc_dir`, which has to be interesting. Where does `net->can.proc_dir` get created? I need to track this down to `can_init_proc` to understand the bigger picture. This seems worth closer examination.
|
| 114/4 |
2026/06/01 17:46 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:net/can/proc.c Name:can_init_proc]
Results: map[SourceCode: 436: /*
437: * can_init_proc - create main CAN proc directory and procfs entries
438: */
439: void can_init_proc(struct net *net)
440: {
441: /* create /proc/net/can directory */
442: net->can.proc_dir = proc_net_mkdir(net, "can", net->proc_net);
443:
444: if (!net->can.proc_dir) {
445: printk(KERN_INFO "can: failed to create /proc/net/can . "
446: "CONFIG_PROC_FS missing?\n");
447: return;
448: }
449:
450: /* own procfs entries from the AF_CAN core */
451: net->can.pde_stats = proc_create_net_single(CAN_PROC_STATS, 0644,
452: net->can.proc_dir, can_stats_proc_show, NULL);
453: net->can.pde_reset_stats = proc_create_net_single(CAN_PROC_RESET_STATS,
454: 0644, net->can.proc_dir, can_reset_stats_proc_show,
455: NULL);
456: net->can.pde_rcvlist_err = proc_create_net_single(CAN_PROC_RCVLIST_ERR,
457: 0644, net->can.proc_dir, can_rcvlist_proc_show,
458: (void *)RX_ERR);
459: net->can.pde_rcvlist_all = proc_create_net_single(CAN_PROC_RCVLIST_ALL,
460: 0644, net->can.proc_dir, can_rcvlist_proc_show,
461: (void *)RX_ALL);
462: net->can.pde_rcvlist_fil = proc_create_net_single(CAN_PROC_RCVLIST_FIL,
463: 0644, net->can.proc_dir, can_rcvlist_proc_show,
464: (void *)RX_FIL);
465: net->can.pde_rcvlist_inv = proc_create_net_single(CAN_PROC_RCVLIST_INV,
466: 0644, net->can.proc_dir, can_rcvlist_proc_show,
467: (void *)RX_INV);
468: net->can.pde_rcvlist_eff = proc_create_net_single(CAN_PROC_RCVLIST_EFF,
469: 0644, net->can.proc_dir, can_rcvlist_eff_proc_show, NULL);
470: net->can.pde_rcvlist_sff = proc_create_net_single(CAN_PROC_RCVLIST_SFF,
471: 0644, net->can.proc_dir, can_rcvlist_sff_proc_show, NULL);
472: }
SourceFile:net/can/proc.c]
|
| 115/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 70644
output: 40
thoughts: 148
Thoughts: Okay, let me break this down.
**Diving into CAN Interface Permissions**
Right, so I'm looking at `/proc/net/can` and its related files. Based on the previous observations, if I've created the network namespace, I should own `/proc/net`, which means I also own `/proc/net/can` and everything beneath it. That's good, so I *should* be able to write to these files with 0644 permissions. I have to verify that assumption.
Now, hold on a second... what does writing to something like `/proc/net/can/stats` actually *do*? I quickly looked at the code, and realized that `can_stats_proc_show` is just for *reading* the stats. Not useful here. Okay, what about the reset function? `can_reset_stats_proc_show`... but wait, how is that created? Let me look... Ah, `proc_create_net_single` is the relevant function, and it uses `proc_net_single_ops`. So I need to dig into `proc_net_single_ops` to see if there's a write handler associated with this particular file. I bet that will provide the answer.
|
| 116/4 |
2026/06/01 17:46 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_net.c Name:proc_net_single_ops]
Results: map[SourceCode: 200: static const struct proc_ops proc_net_single_ops = {
201: .proc_open = single_open_net,
202: .proc_read = seq_read,
203: .proc_write = proc_simple_write,
204: .proc_lseek = seq_lseek,
205: .proc_release = single_release_net,
206: };
SourceFile:fs/proc/proc_net.c]
|
| 117/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 71256
output: 36
thoughts: 33
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience:
**Analyzing the Procfs Write Handler**
Right, so I'm looking at this procfs entry and its `.proc_write` function pointer. It's assigned `proc_simple_write`. Okay, thatβs interesting. Immediately, my mental gears start turning β `proc_simple_write`? I need to refresh my memory on what that particular helper function is doing under the hood. Itβs been a while since I last dug into the procfs details. Letβs dive into its implementation and see what the specifics are in this context. I need to understand if there are any subtle limitations or unexpected behaviors that might apply here.
|
| 118/4 |
2026/06/01 17:46 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/generic.c Name:proc_simple_write]
Results: map[SourceCode: 821: /*
822: * Pull a user buffer into memory and pass it to the file's write handler if
823: * one is supplied. The ->write() method is permitted to modify the
824: * kernel-side buffer.
825: */
826: ssize_t proc_simple_write(struct file *f, const char __user *ubuf, size_t size,
827: loff_t *_pos)
828: {
829: struct proc_dir_entry *pde = PDE(file_inode(f));
830: char *buf;
831: int ret;
832:
833: if (!pde->write)
834: return -EACCES;
835: if (size == 0 || size > PAGE_SIZE - 1)
836: return -EINVAL;
837: buf = memdup_user_nul(ubuf, size);
838: if (IS_ERR(buf))
839: return PTR_ERR(buf);
840: ret = pde->write(f, buf, size);
841: kfree(buf);
842: return ret == 0 ? size : ret;
843: }
SourceFile:fs/proc/generic.c]
|
| 119/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 71864
output: 40
thoughts: 65
Thoughts: **Investigating the Write Handler Call**
Okay, so the code is definitely calling `pde->write`. My immediate question is, where is that write handler actually defined? I need to track down the assignment. Diving into `net/can/proc.c` seems like the logical place to start β it's a CAN-related module, and proc entries are often defined there. Hmm, it doesn't appear that `net/can/proc.c` explicitly sets `pde->write` itself. Thatβs unexpected.
Let's rethink this; I recall using `proc_create_net_single` in similar situations. Does that function handle the write handler? Let me go check its implementation. Maybe the write handler is being set internally during the creation of the proc entry by that function. It's the most likely culprit at this point.
|
| 120/4 |
2026/06/01 17:46 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/proc/proc_net.c Name:proc_create_net_single]
Results: map[SourceCode: 208: struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode,
209: struct proc_dir_entry *parent,
210: int (*show)(struct seq_file *, void *), void *data)
211: {
212: struct proc_dir_entry *p;
213:
214: p = proc_create_reg(name, mode, &parent, data);
215: if (!p)
216: return NULL;
217: pde_force_lookup(p);
218: p->proc_ops = &proc_net_single_ops;
219: p->single_show = show;
220: return proc_register(parent, p);
221: }
SourceFile:fs/proc/proc_net.c]
|
| 121/4 |
2026/06/01 17:46 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 72407
output: 687
thoughts: 1445
Thoughts: Okay, let me think this through. The question is whether an unprivileged user can write to a `procfs` file created with `proc_create_data` and mode 0644.
**Here's the breakdown of my thought process:**
First, I need to consider the basics. If `proc_create_data` *doesn't* set a write function (`p->write`), then `proc_simple_write` will kick in and immediately return `-EACCES`, denying the write even if the Virtual File System (VFS) allows it. So, that's a quick "No" for that scenario.
But wait, what if `proc_create_data` *was* used with a `proc_ops` that *did* define a `proc_write` function? Then it *would* work, right? So now it depends on the context.
So, here's my initial answer: It comes down to ownership and namespacing.
1. If the file is a global file (owned by host root), then the answer is usually "No".
2. If the file is namespaced (owned by the user) AND has a write handler, then the answer is "Yes".
But, these kinds of questions tend to be looking for the "No" answer, because of user namespace security models, but the nuanced "Yes, in certain conditions" answer is also correct.
Then I realized a crucial point about user namespaces: If the user maps *their* UID to 0, they become root *within that namespace*. And if they mount a new `procfs`, they are the owner of *that* `procfs` instance. But, the *files inside* that instance are still owned by whoever the PDE (proc directory entry) says.
If the PDE is global, it's owned by the host root. And since the user is likely unprivileged, they can't map host UID 0 to userns UID 0.
So, the only way they can write is if the PDE is *not* owned by the host root. And the *only* way that happens is if the PDE is namespaced.
Wait, is there any other way? Let's say the user maps their host UID 0 (root) into the user namespace, but they don't mount a new `procfs`. Even then, it's still: they can't.
So, I'm concluding that the answer is *generally* **No** for global files (which is what they are most likely to be asking about). However, the answer is **Yes** for files *within* namespaces owned by the user.
Now, I should double check: Are there any global `procfs` files that are 0644 and have a write handler? Most writable global files are 0200 or 0600. For example, `/proc/sysrq-trigger` is 0200. `/proc/sys/kernel/panic` is 0644, but that uses `proc_sys_permission`, which denies access anyway, so that's not it.
What about if I create a file with `proc_create_data("myfile", 0644, NULL, &ops, NULL)`? If `ops` has a `proc_write`, the owner is host root, the user is in a user namespace, and their UID is unmapped, then the VFS will deny the write. The VFS blocks it based on the ownership and userns mapping.
So, the *only* way is if the UID is mapped. And the only way the UID is mapped is if the file is owned by the user (or some other UID they mapped). And, the only way that the file is owned by the user is if it's namespaced.
So again: the answer is **Generally no, unless the file is part of a namespace owned by the user.**
Should I double-check if any files are created with `proc_create_data` in other namespaced locations? I don't *think* so.
Okay, here's a detailed explanation I'm going to provide: I'll talk about the VFS permission check, the `s_user_ns` of the `procfs` mount, and the `HAS_UNMAPPED_ID` check.
One more thing. What if the user maps their UID to 0, but doesn't mount a new `procfs`? They're using the host's `procfs`. The `s_user_ns` is `init_user_ns`. The `i_uid` (0) is mapped in the `init_user_ns`. So, `HAS_UNMAPPED_ID` is
|
| 122/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 22378
output: 27
thoughts: 309
Thoughts: **My Analysis of the ALSA OSS Proc File Vulnerability**
Okay, so I'm looking at this `/proc/asound/cardX/pcmYp/oss` file. It's the OSS emulation interface in ALSA, and the question is, can an unprivileged user mess with it? First thought: is `/proc/asound` namespaced? Nope, ALSA isn't namespaced, so that means those files are owned by the `GLOBAL_ROOT_UID`. That's a huge clue.
But... hang on. What if the user is in a user namespace? Could they potentially create a new ALSA card from *within* that namespace? Things like `snd-aloop` or `snd-dummy`? No, because loading kernel modules requires `CAP_SYS_MODULE` in the init namespace, so that's a dead end.
Okay, next idea: USB audio. If a user plugs in a USB audio device, that creates an ALSA card, right? But even then, that card is still created in the init namespace and the `/proc` files are still owned by `GLOBAL_ROOT_UID`. It's starting to look like an unprivileged user is stymied at every turn.
Wait a second, there's the device node itself. What if a user has access to, say, `/dev/snd/controlC0`? Does *that* give them write access to the associated `/proc` file? No, procfs permissions are independent of device node permissions. That's a fundamental difference in how these things are handled.
So, the conclusion is this bug can *only* be triggered by root, or someone who's already got write access to `/proc/asound/cardX/pcmYp/oss`. It's pretty well sandboxed.
Let's do a quick double-check though. Is there any *other* way to trigger the `snd_pcm_oss_proc_write` function? Nope, it's only used as the write handler for that proc file. Okay, I'm pretty comfortable with this assessment now.
|
| 123/2 |
2026/06/01 17:47 |
tool |
codesearch-find-references |
0m
Args: map[Name:snd_pcm_oss_proc_write]
Results: map[References:[map[ReferenceKind:takes-address-of ReferencingEntityKind:function ReferencingEntityName:snd_pcm_oss_proc_init SourceFile:sound/core/oss/pcm_oss.c SourceLine:3094]] TruncatedOutput:false]
|
| 124/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 23246
output: 40
thoughts: 278
Thoughts: **Analyzing the Bug in snd_pcm_oss**
Okay, so the vulnerability is definitely within `snd_pcm_oss_proc_init`. This narrows the scope considerably. And that means it's accessible only through the proc filesystem. Right, so procfs files default to 0644 permissions and owned by root. Therefore, exploitation *requires* root privileges to write to it. That's a key piece of information.
But, hold on. I need to make sure I'm not missing anything. Is there *any* other way to trigger this use-after-free? This bug is centered around the use-after-free of `setup` within `snd_pcm_oss_look_for_setup`, which is called from `snd_pcm_oss_open`. `snd_pcm_oss_open` gets called when opening `/dev/dsp` or `/dev/adsp`. But, just opening the device isn't enough. The key is that `setup` has to be freed *before* the use-after-free. It looks like `setup` is only freed in `snd_pcm_oss_proc_write` (when `kstrdup` fails) or in `snd_pcm_oss_proc_free_setup_list` (when someone writes "clear" or "erase" to the proc file, or when the proc file gets destroyed).
Aha! The "clear" or "erase" writes to the proc file trigger `snd_pcm_oss_proc_free_setup_list(pstr)`. Okay, that's the angle. Let's dig into `snd_pcm_oss_proc_free_setup_list` and see what it's doing.
|
| 125/2 |
2026/06/01 17:47 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:2994 LineCount:20]
Results: map[Contents:2994: static void snd_pcm_oss_proc_free_setup_list(struct snd_pcm_str * pstr)
2995: {
2996: struct snd_pcm_oss_setup *setup, *setupn;
2997:
2998: for (setup = pstr->oss.setup_list, pstr->oss.setup_list = NULL;
2999: setup; setup = setupn) {
3000: setupn = setup->next;
3001: kfree(setup->task_name);
3002: kfree(setup);
3003: }
3004: pstr->oss.setup_list = NULL;
3005: }
3006:
3007: static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
3008: struct snd_info_buffer *buffer)
3009: {
3010: struct snd_pcm_str *pstr = entry->private_data;
3011: char line[128], str[32], task_name[32];
3012: const char *ptr;
3013: int idx1;
]
|
| 126/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 24270
output: 23
thoughts: 1095
Thoughts: **Analysis of the ALSA OSS Emulation Use-After-Free Bug**
Okay, so I've been dissecting this ALSA OSS emulation bug and here's my understanding. First, `snd_pcm_oss_proc_free_setup_list` properly cleans up dangling pointers, good. However, the problem lies within `snd_pcm_oss_proc_write`. It appears the potential for a dangling pointer arises when `kstrdup` fails. Specifically, if `kstrdup` fails *after* `kmalloc_obj` has allocated memory for a `setup` structure and added it to the `setup_list`, the allocated `setup` is freed but remains in the linked list.
This condition requires `kstrdup` to fail, which can happen under memory pressure or with fault injection, like what syzkaller might use. The key is that this only triggers when writing to a proc file.
Now, the obvious question is how easily can we trigger it? My initial thoughts are:
* Can an unprivileged user exploit this? Not directly. The proc file is owned by root and has permissions of 0644, meaning it's only writeable by root.
* User namespaces? No, as the user cannot write to a global procfs file.
* VM Guests/Hosts? No relevance here.
* Network/Peripheral? A malicious USB device *could* potentially create an ALSA card but cannot directly write to the proc file. It needs a userspace component to write to the proc file.
* Malicious Filesystem? No.
So, it's clear the initial trigger requires root privileges. This considerably limits the scope of this bug. Root can already do anything on the system, which makes the bug largely academic for exploitation.
Still, let's explore exploitability. The bug is a use-after-free vulnerability, specifically on a 32-byte object (`setup` structure). The use-after-free occurs in `snd_pcm_oss_look_for_setup` which later reads setup->task_name. The attacker can control `setup->task_name` by reallocating the 32-byte memory and controlling the contents. The `strcmp` could lead to an arbitrary read primitive. The vulnerability becomes much more interesting because `snd_pcm_oss_look_for_setup` copies the potentially malicious `setup` structure to `rsetup`. `rsetup` is then used to configure the OSS substream, meaning an attacker can control multiple parameters: disable, direct, block, nonblock, partialfrag, nosilence, buggyptr, periods, period_size. This might lead to further vulnerabilities.
However, since this requires root, the potential for exploitability is minimal. Root has already achieved full control. Is there another way to trigger the bug? We need to verify how `snd_pcm_oss_proc_write` is called and identify any possible secondary entry points, but the initial analysis indicates it's inaccessible to unprivileged users.
|
| 127/2 |
2026/06/01 17:47 |
tool |
grepper |
0m
Args: map[Expression:snd_pcm_oss_proc_write]
Results: map[Output:sound/core/oss/pcm_oss.c=2994=static void snd_pcm_oss_proc_free_setup_list(struct snd_pcm_str * pstr)
--
sound/core/oss/pcm_oss.c-3006-
sound/core/oss/pcm_oss.c:3007:static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
sound/core/oss/pcm_oss.c-3008- struct snd_info_buffer *buffer)
--
sound/core/oss/pcm_oss.c=3081=static void snd_pcm_oss_proc_init(struct snd_pcm *pcm)
--
sound/core/oss/pcm_oss.c-3093- entry->c.text.read = snd_pcm_oss_proc_read;
sound/core/oss/pcm_oss.c:3094: entry->c.text.write = snd_pcm_oss_proc_write;
sound/core/oss/pcm_oss.c-3095- entry->private_data = pstr;
]
|
| 128/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 26315
output: 40
thoughts: 272
Thoughts: **My Analysis of the Vulnerability**
Okay, so I'm focusing on this proc file write issue. Initially, I was thinking it was the direct write handler, but now I'm re-evaluating. The key question is whether a non-root user can actually *write* to this proc file. My gut tells me udev rules aren't messing with `/proc/asound/cardX/pcmYp/oss`; udev usually focuses on `/dev/snd/`. Proc files are generally outside its purview.
Hmm, maybe `snd_info_register` does something tricky with ownership? No, that just calls `proc_create_data`, which I remember doesn't touch the file permissions.
Now, let's explore a different angle: memory allocation failures. Can a low-memory situation trigger the bug? Ah, yes! `kstrdup` fails when memory's tight. And could an unprivileged user cause memory pressure? Absolutely, they can consume memory and trigger allocation failures. But... they *still* need root privileges to write to the proc file, which is the crux of triggering the vulnerable code path. So, at first glance, it looks like this is only reachable by root.
Wait a second... what if we look at ALSA OSS emulation? Can we leverage an ioctl in that context? Let's check `snd_pcm_oss_ioctl`. That might be the key.
|
| 129/2 |
2026/06/01 17:47 |
tool |
read-file |
0m
Args: map[File:sound/core/oss/pcm_oss.c FirstLine:2590 LineCount:50]
Results: map[Contents:2590: snd_pcm_oss_sync(pcm_oss_file);
2591: mutex_lock(&pcm->open_mutex);
2592: snd_pcm_oss_release_file(pcm_oss_file);
2593: mutex_unlock(&pcm->open_mutex);
2594: wake_up(&pcm->open_wait);
2595: module_put(pcm->card->module);
2596: snd_card_file_remove(pcm->card, file);
2597: return 0;
2598: }
2599:
2600: static long snd_pcm_oss_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2601: {
2602: struct snd_pcm_oss_file *pcm_oss_file;
2603: int __user *p = (int __user *)arg;
2604: int res;
2605:
2606: pcm_oss_file = file->private_data;
2607: if (cmd == OSS_GETVERSION)
2608: return put_user(SNDRV_OSS_VERSION, p);
2609: if (cmd == OSS_ALSAEMULVER)
2610: return put_user(1, p);
2611: #if IS_REACHABLE(CONFIG_SND_MIXER_OSS)
2612: if (((cmd >> 8) & 0xff) == 'M') { /* mixer ioctl - for OSS compatibility */
2613: struct snd_pcm_substream *substream;
2614: int idx;
2615: for (idx = 0; idx < 2; ++idx) {
2616: substream = pcm_oss_file->streams[idx];
2617: if (substream != NULL)
2618: break;
2619: }
2620: if (snd_BUG_ON(idx >= 2))
2621: return -ENXIO;
2622: return snd_mixer_oss_ioctl_card(substream->pcm->card, cmd, arg);
2623: }
2624: #endif
2625: if (((cmd >> 8) & 0xff) != 'P')
2626: return -EINVAL;
2627: #ifdef OSS_DEBUG
2628: pr_debug("pcm_oss: ioctl = 0x%x\n", cmd);
2629: #endif
2630: switch (cmd) {
2631: case SNDCTL_DSP_RESET:
2632: return snd_pcm_oss_reset(pcm_oss_file);
2633: case SNDCTL_DSP_SYNC:
2634: return snd_pcm_oss_sync(pcm_oss_file);
2635: case SNDCTL_DSP_SPEED:
2636: if (get_user(res, p))
2637: return -EFAULT;
2638: res = snd_pcm_oss_set_rate(pcm_oss_file, res);
2639: if (res < 0)
]
|
| 130/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 27785
output: 17
thoughts: 13
Thoughts: Here's my thought process, as if I were considering this question:
**Investigating `setup_list` and ioctls**
Okay, so the question is whether any `ioctl` call modifies the `setup_list`. That's an interesting one. My initial instinct is to doubt it, based on my understanding of how device drivers typically operate within the kernel. `setup_list` often seems like something used early in the boot process, a sort of static configuration list. It's purpose, in my experience, has been for early device initialization. If the `setup_list` is the interface for early device initialization, I'd expect it to be touched only, perhaps, during initial system setup.
However, I can't dismiss the possibility outright. I need to think about the kernel subsystems where this might make sense. Are there any hardware configurations that can be done at runtime and effect the information? Things like hot-plugging devices, or module loading... might there be a scenario, perhaps related to a specific hardware architecture or a specialized driver, where an `ioctl` could influence or extend the `setup_list` later on? I'd have to look at the relevant driver code and header files to see if a driver is attempting to dynamically modify things. Are there any hooks that might be used by a driver to add entries to the `setup_list` or otherwise influence it?
I'd start by looking through kernel source and documentation. I'd specifically be searching for `ioctl` definitions related to devices that are known to have dynamic configuration or hot-plugging capabilities. Devices such as: PCIe, USB, and maybe even some specialized networking or storage controllers. I'd then investigate how the drivers for these devices interact with the broader initialization process, and see if there's any pathway they might use to modify the `setup_list` or a similar structure that could be accessed via `ioctl`.
Ultimately, the answer likely hinges on a very specific set of circumstances. Without more context, I have to assume "no", but that assumption needs thorough investigation to be certain.
|
| 131/2 |
2026/06/01 17:47 |
tool |
grepper |
0m
Args: map[Expression:setup_list]
Results: map[Output:include/sound/pcm_oss.h=62=struct snd_pcm_oss_stream {
include/sound/pcm_oss.h:63: struct snd_pcm_oss_setup *setup_list; /* setup list */
include/sound/pcm_oss.h-64- struct mutex setup_mutex;
--
sound/core/oss/pcm_oss.c=2345=static void snd_pcm_oss_look_for_setup(struct snd_pcm *pcm, int stream,
--
sound/core/oss/pcm_oss.c-2352- do {
sound/core/oss/pcm_oss.c:2353: for (setup = pcm->streams[stream].oss.setup_list; setup;
sound/core/oss/pcm_oss.c-2354- setup = setup->next) {
--
sound/core/oss/pcm_oss.c=2973=static void snd_pcm_oss_proc_read(struct snd_info_entry *entry,
--
sound/core/oss/pcm_oss.c-2976- struct snd_pcm_str *pstr = entry->private_data;
sound/core/oss/pcm_oss.c:2977: struct snd_pcm_oss_setup *setup = pstr->oss.setup_list;
sound/core/oss/pcm_oss.c-2978- guard(mutex)(&pstr->oss.setup_mutex);
--
sound/core/oss/pcm_oss.c-2993-
sound/core/oss/pcm_oss.c:2994:static void snd_pcm_oss_proc_free_setup_list(struct snd_pcm_str * pstr)
sound/core/oss/pcm_oss.c-2995-{
--
sound/core/oss/pcm_oss.c-2997-
sound/core/oss/pcm_oss.c:2998: for (setup = pstr->oss.setup_list, pstr->oss.setup_list = NULL;
sound/core/oss/pcm_oss.c-2999- setup; setup = setupn) {
--
sound/core/oss/pcm_oss.c-3003- }
sound/core/oss/pcm_oss.c:3004: pstr->oss.setup_list = NULL;
sound/core/oss/pcm_oss.c-3005-}
--
sound/core/oss/pcm_oss.c=3007=static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
--
sound/core/oss/pcm_oss.c-3020- if (!strcmp(task_name, "clear") || !strcmp(task_name, "erase")) {
sound/core/oss/pcm_oss.c:3021: snd_pcm_oss_proc_free_setup_list(pstr);
sound/core/oss/pcm_oss.c-3022- continue;
sound/core/oss/pcm_oss.c-3023- }
sound/core/oss/pcm_oss.c:3024: for (setup = pstr->oss.setup_list; setup; setup = setup->next) {
sound/core/oss/pcm_oss.c-3025- if (!strcmp(setup->task_name, task_name)) {
--
sound/core/oss/pcm_oss.c-3062- }
sound/core/oss/pcm_oss.c:3063: if (pstr->oss.setup_list == NULL)
sound/core/oss/pcm_oss.c:3064: pstr->oss.setup_list = setup;
sound/core/oss/pcm_oss.c-3065- else {
sound/core/oss/pcm_oss.c:3066: for (setup1 = pstr->oss.setup_list;
sound/core/oss/pcm_oss.c-3067- setup1->next; setup1 = setup1->next);
--
sound/core/oss/pcm_oss.c=3105=static void snd_pcm_oss_proc_done(struct snd_pcm *pcm)
--
sound/core/oss/pcm_oss.c-3111- pstr->oss.proc_entry = NULL;
sound/core/oss/pcm_oss.c:3112: snd_pcm_oss_proc_free_setup_list(pstr);
sound/core/oss/pcm_oss.c-3113- }
--
sound/core/pcm.c=814=static void snd_pcm_free_stream(struct snd_pcm_str * pstr)
--
sound/core/pcm.c-831-#if IS_ENABLED(CONFIG_SND_PCM_OSS)
sound/core/pcm.c:832: for (setup = pstr->oss.setup_list; setup; setup = setupn) {
sound/core/pcm.c-833- setupn = setup->next;
--
tools/perf/util/symbol.c=2208=static int vmlinux_path__init(struct perf_env *env)
--
tools/perf/util/symbol.c-2249-
tools/perf/util/symbol.c:2250:int setup_list(struct strlist **list, const char *list_str,
tools/perf/util/symbol.c-2251- const char *list_name)
--
tools/perf/util/symbol.c=2394=int symbol__init(struct perf_env *env)
--
tools/perf/util/symbol.c-2415-
tools/perf/util/symbol.c:2416: if (setup_list(&symbol_conf.dso_list,
tools/perf/util/symbol.c-2417- symbol_conf.dso_list_str, "dso") < 0)
--
tools/perf/util/symbol.c-2419-
tools/perf/util/symbol.c:2420: if (setup_list(&symbol_conf.comm_list,
tools/perf/util/symbol.c-2421- symbol_conf.comm_list_str, "comm") < 0)
--
tools/perf/util/symbol.c-2431-
tools/perf/util/symbol.c:2432: if (setup_list(&symbol_conf.sym_list,
tools/perf/util/symbol.c-2433- symbol_conf.sym_list_str, "symbol") < 0)
--
tools/perf/util/symbol.c-2439-
tools/perf/util/symbol.c:2440: if (setup_list(&symbol_conf.bt_stop_list,
tools/perf/util/symbol.c-2441- symbol_conf.bt_stop_list_str, "symbol") < 0)
--
tools/perf/util/symbol.h=222=int compare_proc_modules(const char *from, const char *to);
tools/perf/util/symbol.h-223-
tools/perf/util/symbol.h:224:int setup_list(struct strlist **list, const char *list_str,
tools/perf/util/symbol.h-225- const char *list_name);
--
tools/testing/selftests/net/ovpn/common.sh=179=ovpn_build_capture_filter() {
--
tools/testing/selftests/net/ovpn/common.sh-197-
tools/testing/selftests/net/ovpn/common.sh:198:ovpn_setup_listener() {
tools/testing/selftests/net/ovpn/common.sh-199- local peer="$1"
--
tools/testing/selftests/net/ovpn/test.sh=23=ovpn_prepare_network() {
--
tools/testing/selftests/net/ovpn/test.sh-32- ovpn_cmd_ok "start notification listener peer${p}" \
tools/testing/selftests/net/ovpn/test.sh:33: ovpn_setup_listener "${p}"
tools/testing/selftests/net/ovpn/test.sh-34- # starting all YNL listeners back-to-back can intermittently
]
|
| 132/2 |
2026/06/01 17:47 |
llm |
expert |
0m
Model:
Tokens:
input: 30362
output: 66
thoughts: 1025
Thoughts: **My Analysis of the ALSA OSS Emulation Use-After-Free Vulnerability**
Okay, let's break this down. `setup_list` is only modified within `snd_pcm_oss_proc_write`, `snd_pcm_oss_proc_free_setup_list`, and `snd_pcm_free_stream`. So, the entry point for this bug is clearly through the proc file. And that proc file is 0644, owned by root. Meaning, only root can touch it.
My understanding is this: there's a use-after-free (UAF) in `snd_pcm_oss_look_for_setup` accessing a freed `snd_pcm_oss_setup` object. This UAF is a result of an error in `snd_pcm_oss_proc_write`, specifically, the `setup` object being freed but *not* removed from `pstr->oss.setup_list` if `kstrdup` fails. This `snd_pcm_oss_proc_write` function is, in turn, the write handler for the `/proc/asound/cardX/pcmYp/oss` file. Because this file is owned by root and has 0644 permissions, *only* root can write to it.
Therefore, only root can trigger this bug. This eliminates unprivileged processes, user namespaces, VM guests, networks, peripherals, and any kind of malicious filesystem as possible exploit vectors. While it *is* technically exploitable (it is a UAF, allowing arbitrary read/control), the root prerequisite means it is not a security boundary crossing. It can cause a denial of service (kernel crash due to KASAN or invalid memory access), but, again, only root can trigger it.
Let's do a double check. Is there *any* scenario where a non-root user could write to `/proc/asound/cardX/pcmYp/oss`? Can a setuid binary? I don't know of any that specifically target ALSA proc files in that way. How about a privileged daemon based on unprivileged user input? Possibly, but I haven't seen any known daemons that do this. What about a user namespace mapping root and mounting procfs? No, `HAS_UNMAPPED_ID` prevents access to files owned by the host's root. Wait... what if it maps host root to the user namespace root? Nope, unprivileged users can't map host root, only root can do that. An unprivileged user is blocked.
Let's make sure there isn't any other way `snd_pcm_oss_proc_write` is called. It's only used as the write handler for this proc file, based on the grep.
Now, is this bug exploitable? Yes, it's a UAF. Can it cause a Denial of Service? Definitely. KASAN will panic the kernel (if panic_on_warn is set or it's a BUG). Even without KASAN, dereferencing a freed pointer results in a page fault/kernel oops. Is it accessible from an unprivileged process? No. User namespace? No. VM Guest? No. VM Host? No. Network? No. Peripheral? No. Filesystem? No.
Here's the final assessment: This is a use-after-free in the ALSA OSS emulation layer that occurs when writing to the `/proc/asound/cardX/pcmYp/oss` file. If the `kstrdup` call fails, the `setup` object is freed but stays on the `setup_list`. Subsequent operations will access the freed object, causing a UAF. However, the proc file is owned by root and is 0644. Therefore, *only* the root user can trigger the vulnerability. Unprivileged users, even in user namespaces, can't write to this file due to DAC permissions/capabilities for root-owned files. Since it requires root, it doesn't cross any security boundaries. While technically it's a memory corruption bug, potentially leading to denial-of-service or even privilege escalation, the prerequisite of already having root privileges makes it unexploitable for privilege escalation from an unprivileged context.
|
| 133/2 |
2026/06/01 17:48 |
tool |
set-results |
0m
Args: map[DenialOfService:true Exploitable:true FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
Results: map[DenialOfService:true Exploitable:true FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
|
| 134/2 |
2026/06/01 17:48 |
llm |
expert |
0m
Model:
Tokens:
input: 32417
output: 710
thoughts: 13
Thoughts: Okay, here's the summary, rendered in the first person, assuming the user is an expert:
**Finalizing the Response**
Alright, the data's compiled, the analysis is complete. Now it's time to craft the definitive response. I've considered all the nuances, the potential counterarguments, and the implications of each conclusion. This isn't just about regurgitating findings; it's about synthesizing them into a coherent, insightful narrative. I need to ensure this final product reflects the depth of understanding thatβs been achieved, and delivers value. It's time to assemble everything into a clear, concise, and compelling package. Let's make this count.
|
| 135/1 |
2026/06/01 17:48 |
action |
format-explanation |
0m
Results: map[Explanation:**Bug Analysis:**
The bug is a Use-After-Free (UAF) in the ALSA OSS emulation layer, specifically
in `snd_pcm_oss_look_for_setup()`.
**Root Cause:**
The vulnerability originates in `snd_pcm_oss_proc_write()`, which is the write
handler for the `/proc/asound/cardX/pcmYp/oss` procfs file. When a user writes
configuration data to this file, the kernel allocates a new `snd_pcm_oss_setup`
object and links it into the `pstr->oss.setup_list` linked list.
After linking the object, the code attempts to duplicate the task name using
`kstrdup()`. If this memory allocation fails (e.g., due to memory pressure or
fault injection), the code frees the `setup` object using `kfree(setup)` but
crucially **fails to remove it from the `setup_list`**.
This leaves a dangling pointer in the list. Later, when an application opens the
OSS device (e.g., `/dev/dsp`), `snd_pcm_oss_look_for_setup()` traverses the
`setup_list` and accesses the freed `setup` object, triggering the UAF.
**Security Impact Assessment:**
* **Exploitable / Denial of Service:** Yes. The bug is a classic
Use-After-Free of a 32-byte slab object. Accessing the freed memory can lead to
a kernel crash (Denial of Service). If an attacker can reliably reallocate the
freed object with controlled data, they could manipulate the `setup->task_name`
pointer to achieve an arbitrary read primitive during the `strcmp()` check, or
control the OSS setup parameters copied out of the struct.
* **Accessible From Unprivileged Processes / User Namespaces:** **No.** The
vulnerable code path can only be reached by writing to the
`/proc/asound/cardX/pcmYp/oss` file. This procfs file is explicitly created with
`0644` permissions (`S_IFREG | 0644`) and is owned by the global root
(`GLOBAL_ROOT_UID`).
* An unprivileged user cannot write to this file due to standard DAC
permissions.
* Even within a user namespace where an unprivileged user maps their UID
to 0 and mounts a fresh `procfs`, the VFS `HAS_UNMAPPED_ID` check will block
write access. The file remains owned by the host's root UID, which is
unmapped in the user namespace, resulting in an `-EACCES` error.
* **Other Triggers (Network, Peripheral, VM, Filesystem):** No. The bug is
strictly tied to a local user-space write operation to a specific procfs file.
It cannot be triggered remotely, via malicious filesystems, or by simply
plugging in a peripheral device (a user-space component would still need to
write to the proc file).
**Conclusion:**
While this is a valid memory corruption bug (Use-After-Free), it strictly
requires `root` privileges to trigger because it relies on writing to a
root-owned procfs file. Since the attacker must already possess root access to
exploit it, the bug does not cross any security boundaries and poses no risk of
privilege escalation from an unprivileged context.]
|